| /* |
| * Copyright (c) 2012-2013, 2016 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Thomas Grass |
| * Andreas Hansson |
| * Sascha Bischoff |
| * Neha Agarwal |
| */ |
| |
| #include <algorithm> |
| |
| #include "base/random.hh" |
| #include "base/trace.hh" |
| #include "cpu/testers/traffic_gen/generators.hh" |
| #include "debug/TrafficGen.hh" |
| #include "proto/packet.pb.h" |
| |
| BaseGen::BaseGen(const std::string& _name, MasterID master_id, Tick _duration) |
| : _name(_name), masterID(master_id), duration(_duration) |
| { |
| } |
| |
| PacketPtr |
| BaseGen::getPacket(Addr addr, unsigned size, const MemCmd& cmd, |
| Request::FlagsType flags) |
| { |
| // Create new request |
| Request *req = new Request(addr, size, flags, masterID); |
| // Dummy PC to have PC-based prefetchers latch on; get entropy into higher |
| // bits |
| req->setPC(((Addr)masterID) << 2); |
| |
| // Embed it in a packet |
| PacketPtr pkt = new Packet(req, cmd); |
| |
| uint8_t* pkt_data = new uint8_t[req->getSize()]; |
| pkt->dataDynamic(pkt_data); |
| |
| if (cmd.isWrite()) { |
| std::fill_n(pkt_data, req->getSize(), (uint8_t)masterID); |
| } |
| |
| return pkt; |
| } |
| |
| void |
| LinearGen::enter() |
| { |
| // reset the address and the data counter |
| nextAddr = startAddr; |
| dataManipulated = 0; |
| } |
| |
| PacketPtr |
| LinearGen::getNextPacket() |
| { |
| // choose if we generate a read or a write here |
| bool isRead = readPercent != 0 && |
| (readPercent == 100 || random_mt.random(0, 100) < readPercent); |
| |
| assert((readPercent == 0 && !isRead) || (readPercent == 100 && isRead) || |
| readPercent != 100); |
| |
| DPRINTF(TrafficGen, "LinearGen::getNextPacket: %c to addr %x, size %d\n", |
| isRead ? 'r' : 'w', nextAddr, blocksize); |
| |
| // Add the amount of data manipulated to the total |
| dataManipulated += blocksize; |
| |
| PacketPtr pkt = getPacket(nextAddr, blocksize, |
| isRead ? MemCmd::ReadReq : MemCmd::WriteReq); |
| |
| // increment the address |
| nextAddr += blocksize; |
| |
| // If we have reached the end of the address space, reset the |
| // address to the start of the range |
| if (nextAddr > endAddr) { |
| DPRINTF(TrafficGen, "Wrapping address to the start of " |
| "the range\n"); |
| nextAddr = startAddr; |
| } |
| |
| return pkt; |
| } |
| |
| Tick |
| LinearGen::nextPacketTick(bool elastic, Tick delay) const |
| { |
| // Check to see if we have reached the data limit. If dataLimit is |
| // zero we do not have a data limit and therefore we will keep |
| // generating requests for the entire residency in this state. |
| if (dataLimit && dataManipulated >= dataLimit) { |
| DPRINTF(TrafficGen, "Data limit for LinearGen reached.\n"); |
| // there are no more requests, therefore return MaxTick |
| return MaxTick; |
| } else { |
| // return the time when the next request should take place |
| Tick wait = random_mt.random(minPeriod, maxPeriod); |
| |
| // compensate for the delay experienced to not be elastic, by |
| // default the value we generate is from the time we are |
| // asked, so the elasticity happens automatically |
| if (!elastic) { |
| if (wait < delay) |
| wait = 0; |
| else |
| wait -= delay; |
| } |
| |
| return curTick() + wait; |
| } |
| } |
| |
| void |
| RandomGen::enter() |
| { |
| // reset the counter to zero |
| dataManipulated = 0; |
| } |
| |
| PacketPtr |
| RandomGen::getNextPacket() |
| { |
| // choose if we generate a read or a write here |
| bool isRead = readPercent != 0 && |
| (readPercent == 100 || random_mt.random(0, 100) < readPercent); |
| |
| assert((readPercent == 0 && !isRead) || (readPercent == 100 && isRead) || |
| readPercent != 100); |
| |
| // address of the request |
| Addr addr = random_mt.random(startAddr, endAddr - 1); |
| |
| // round down to start address of block |
| addr -= addr % blocksize; |
| |
| DPRINTF(TrafficGen, "RandomGen::getNextPacket: %c to addr %x, size %d\n", |
| isRead ? 'r' : 'w', addr, blocksize); |
| |
| // add the amount of data manipulated to the total |
| dataManipulated += blocksize; |
| |
| // create a new request packet |
| return getPacket(addr, blocksize, |
| isRead ? MemCmd::ReadReq : MemCmd::WriteReq); |
| } |
| |
| PacketPtr |
| DramGen::getNextPacket() |
| { |
| // if this is the first of the packets in series to be generated, |
| // start counting again |
| if (countNumSeqPkts == 0) { |
| countNumSeqPkts = numSeqPkts; |
| |
| // choose if we generate a read or a write here |
| isRead = readPercent != 0 && |
| (readPercent == 100 || random_mt.random(0, 100) < readPercent); |
| |
| assert((readPercent == 0 && !isRead) || |
| (readPercent == 100 && isRead) || |
| readPercent != 100); |
| |
| // pick a random bank |
| unsigned int new_bank = |
| random_mt.random<unsigned int>(0, nbrOfBanksUtil - 1); |
| |
| // pick a random rank |
| unsigned int new_rank = |
| random_mt.random<unsigned int>(0, nbrOfRanks - 1); |
| |
| // Generate the start address of the command series |
| // routine will update addr variable with bank, rank, and col |
| // bits updated for random traffic mode |
| genStartAddr(new_bank, new_rank); |
| |
| } else { |
| // increment the column by one |
| if (addrMapping == 1) |
| // addrMapping=1: RoRaBaCoCh/RoRaBaChCo |
| // Simply increment addr by blocksize to increment the column by one |
| addr += blocksize; |
| |
| else if (addrMapping == 0) { |
| // addrMapping=0: RoCoRaBaCh |
| // Explicity increment the column bits |
| unsigned int new_col = ((addr / blocksize / nbrOfBanksDRAM / nbrOfRanks) % |
| (pageSize / blocksize)) + 1; |
| replaceBits(addr, blockBits + bankBits + rankBits + pageBits - 1, |
| blockBits + bankBits + rankBits, new_col); |
| } |
| } |
| |
| DPRINTF(TrafficGen, "DramGen::getNextPacket: %c to addr %x, " |
| "size %d, countNumSeqPkts: %d, numSeqPkts: %d\n", |
| isRead ? 'r' : 'w', addr, blocksize, countNumSeqPkts, numSeqPkts); |
| |
| // create a new request packet |
| PacketPtr pkt = getPacket(addr, blocksize, |
| isRead ? MemCmd::ReadReq : MemCmd::WriteReq); |
| |
| // add the amount of data manipulated to the total |
| dataManipulated += blocksize; |
| |
| // subtract the number of packets remained to be generated |
| --countNumSeqPkts; |
| |
| // return the generated packet |
| return pkt; |
| } |
| |
| PacketPtr |
| DramRotGen::getNextPacket() |
| { |
| // if this is the first of the packets in series to be generated, |
| // start counting again |
| if (countNumSeqPkts == 0) { |
| countNumSeqPkts = numSeqPkts; |
| |
| // choose if we generate a read or a write here |
| if (readPercent == 50) { |
| if ((nextSeqCount % nbrOfBanksUtil) == 0) { |
| // Change type after all banks have been rotated |
| // Otherwise, keep current value |
| isRead = !isRead; |
| } |
| } else { |
| // Set randomly based on percentage |
| isRead = readPercent != 0; |
| } |
| |
| assert((readPercent == 0 && !isRead) || |
| (readPercent == 100 && isRead) || |
| readPercent != 100); |
| |
| // Overwrite random bank value |
| // Rotate across banks |
| unsigned int new_bank = nextSeqCount % nbrOfBanksUtil; |
| |
| // Overwrite random rank value |
| // Will rotate to the next rank after rotating through all banks, |
| // for each specified command type. |
| |
| // Use modular function to ensure that calculated rank is within |
| // system limits after state transition |
| unsigned int new_rank = (nextSeqCount / maxSeqCountPerRank) % |
| nbrOfRanks; |
| |
| // Increment nextSeqCount |
| // Roll back to 0 after completing a full rotation across |
| // banks, command type, and ranks |
| nextSeqCount = (nextSeqCount + 1) % |
| (nbrOfRanks * maxSeqCountPerRank); |
| |
| DPRINTF(TrafficGen, "DramRotGen::getNextPacket nextSeqCount: %d " |
| "new_rank: %d new_bank: %d\n", |
| nextSeqCount, new_rank, new_bank); |
| |
| // Generate the start address of the command series |
| // routine will update addr variable with bank, rank, and col |
| // bits updated for rotation scheme |
| genStartAddr(new_bank, new_rank); |
| |
| } else { |
| // increment the column by one |
| if (addrMapping == 1) |
| // addrMapping=1: RoRaBaCoCh/RoRaBaChCo |
| // Simply increment addr by blocksize to increment the column by one |
| addr += blocksize; |
| |
| else if (addrMapping == 0) { |
| // addrMapping=0: RoCoRaBaCh |
| // Explicity increment the column bits |
| unsigned int new_col = ((addr / blocksize / nbrOfBanksDRAM / nbrOfRanks) % |
| (pageSize / blocksize)) + 1; |
| replaceBits(addr, blockBits + bankBits + rankBits + pageBits - 1, |
| blockBits + bankBits + rankBits, new_col); |
| } |
| } |
| |
| DPRINTF(TrafficGen, "DramRotGen::getNextPacket: %c to addr %x, " |
| "size %d, countNumSeqPkts: %d, numSeqPkts: %d\n", |
| isRead ? 'r' : 'w', addr, blocksize, countNumSeqPkts, numSeqPkts); |
| |
| // create a new request packet |
| PacketPtr pkt = getPacket(addr, blocksize, |
| isRead ? MemCmd::ReadReq : MemCmd::WriteReq); |
| |
| // add the amount of data manipulated to the total |
| dataManipulated += blocksize; |
| |
| // subtract the number of packets remained to be generated |
| --countNumSeqPkts; |
| |
| // return the generated packet |
| return pkt; |
| } |
| |
| void |
| DramGen::genStartAddr(unsigned int new_bank, unsigned int new_rank) |
| { |
| // start by picking a random address in the range |
| addr = random_mt.random<Addr>(startAddr, endAddr - 1); |
| |
| // round down to start address of a block, i.e. a DRAM burst |
| addr -= addr % blocksize; |
| |
| // insert the bank bits at the right spot, and align the |
| // address to achieve the required hit length, this involves |
| // finding the appropriate start address such that all |
| // sequential packets target successive columns in the same |
| // page |
| |
| // for example, if we have a stride size of 192B, which means |
| // for LPDDR3 where burstsize = 32B we have numSeqPkts = 6, |
| // the address generated previously can be such that these |
| // 192B cross the page boundary, hence it needs to be aligned |
| // so that they all belong to the same page for page hit |
| unsigned int columns_per_page = pageSize / blocksize; |
| |
| // pick a random column, but ensure that there is room for |
| // numSeqPkts sequential columns in the same page |
| unsigned int new_col = |
| random_mt.random<unsigned int>(0, columns_per_page - numSeqPkts); |
| |
| if (addrMapping == 1) { |
| // addrMapping=1: RoRaBaCoCh/RoRaBaChCo |
| // Block bits, then page bits, then bank bits, then rank bits |
| replaceBits(addr, blockBits + pageBits + bankBits - 1, |
| blockBits + pageBits, new_bank); |
| replaceBits(addr, blockBits + pageBits - 1, blockBits, new_col); |
| if (rankBits != 0) { |
| replaceBits(addr, blockBits + pageBits + bankBits +rankBits - 1, |
| blockBits + pageBits + bankBits, new_rank); |
| } |
| } else if (addrMapping == 0) { |
| // addrMapping=0: RoCoRaBaCh |
| // Block bits, then bank bits, then rank bits, then page bits |
| replaceBits(addr, blockBits + bankBits - 1, blockBits, new_bank); |
| replaceBits(addr, blockBits + bankBits + rankBits + pageBits - 1, |
| blockBits + bankBits + rankBits, new_col); |
| if (rankBits != 0) { |
| replaceBits(addr, blockBits + bankBits + rankBits - 1, |
| blockBits + bankBits, new_rank); |
| } |
| } |
| } |
| |
| Tick |
| RandomGen::nextPacketTick(bool elastic, Tick delay) const |
| { |
| // Check to see if we have reached the data limit. If dataLimit is |
| // zero we do not have a data limit and therefore we will keep |
| // generating requests for the entire residency in this state. |
| if (dataLimit && dataManipulated >= dataLimit) |
| { |
| DPRINTF(TrafficGen, "Data limit for RandomGen reached.\n"); |
| // No more requests. Return MaxTick. |
| return MaxTick; |
| } else { |
| // return the time when the next request should take place |
| Tick wait = random_mt.random(minPeriod, maxPeriod); |
| |
| // compensate for the delay experienced to not be elastic, by |
| // default the value we generate is from the time we are |
| // asked, so the elasticity happens automatically |
| if (!elastic) { |
| if (wait < delay) |
| wait = 0; |
| else |
| wait -= delay; |
| } |
| |
| return curTick() + wait; |
| } |
| } |
| |
| TraceGen::InputStream::InputStream(const std::string& filename) |
| : trace(filename) |
| { |
| init(); |
| } |
| |
| void |
| TraceGen::InputStream::init() |
| { |
| // Create a protobuf message for the header and read it from the stream |
| ProtoMessage::PacketHeader header_msg; |
| if (!trace.read(header_msg)) { |
| panic("Failed to read packet header from trace\n"); |
| } else if (header_msg.tick_freq() != SimClock::Frequency) { |
| panic("Trace was recorded with a different tick frequency %d\n", |
| header_msg.tick_freq()); |
| } |
| } |
| |
| void |
| TraceGen::InputStream::reset() |
| { |
| trace.reset(); |
| init(); |
| } |
| |
| bool |
| TraceGen::InputStream::read(TraceElement& element) |
| { |
| ProtoMessage::Packet pkt_msg; |
| if (trace.read(pkt_msg)) { |
| element.cmd = pkt_msg.cmd(); |
| element.addr = pkt_msg.addr(); |
| element.blocksize = pkt_msg.size(); |
| element.tick = pkt_msg.tick(); |
| element.flags = pkt_msg.has_flags() ? pkt_msg.flags() : 0; |
| return true; |
| } |
| |
| // We have reached the end of the file |
| return false; |
| } |
| |
| Tick |
| TraceGen::nextPacketTick(bool elastic, Tick delay) const |
| { |
| if (traceComplete) { |
| DPRINTF(TrafficGen, "No next tick as trace is finished\n"); |
| // We are at the end of the file, thus we have no more data in |
| // the trace Return MaxTick to signal that there will be no |
| // more transactions in this active period for the state. |
| return MaxTick; |
| } |
| |
| assert(nextElement.isValid()); |
| |
| DPRINTF(TrafficGen, "Next packet tick is %d\n", tickOffset + |
| nextElement.tick); |
| |
| // if the playback is supposed to be elastic, add the delay |
| if (elastic) |
| tickOffset += delay; |
| |
| return std::max(tickOffset + nextElement.tick, curTick()); |
| } |
| |
| void |
| TraceGen::enter() |
| { |
| // update the trace offset to the time where the state was entered. |
| tickOffset = curTick(); |
| |
| // clear everything |
| currElement.clear(); |
| |
| // read the first element in the file and set the complete flag |
| traceComplete = !trace.read(nextElement); |
| } |
| |
| PacketPtr |
| TraceGen::getNextPacket() |
| { |
| // shift things one step forward |
| currElement = nextElement; |
| nextElement.clear(); |
| |
| // read the next element and set the complete flag |
| traceComplete = !trace.read(nextElement); |
| |
| // it is the responsibility of the traceComplete flag to ensure we |
| // always have a valid element here |
| assert(currElement.isValid()); |
| |
| DPRINTF(TrafficGen, "TraceGen::getNextPacket: %c %d %d %d 0x%x\n", |
| currElement.cmd.isRead() ? 'r' : 'w', |
| currElement.addr, |
| currElement.blocksize, |
| currElement.tick, |
| currElement.flags); |
| |
| PacketPtr pkt = getPacket(currElement.addr + addrOffset, |
| currElement.blocksize, |
| currElement.cmd, currElement.flags); |
| |
| if (!traceComplete) |
| DPRINTF(TrafficGen, "nextElement: %c addr %d size %d tick %d (%d)\n", |
| nextElement.cmd.isRead() ? 'r' : 'w', |
| nextElement.addr, |
| nextElement.blocksize, |
| nextElement.tick + tickOffset, |
| nextElement.tick); |
| |
| return pkt; |
| } |
| |
| void |
| TraceGen::exit() |
| { |
| // Check if we reached the end of the trace file. If we did not |
| // then we want to generate a warning stating that not the entire |
| // trace was played. |
| if (!traceComplete) { |
| warn("Trace player %s was unable to replay the entire trace!\n", |
| name()); |
| } |
| |
| // Clear any flags and start over again from the beginning of the |
| // file |
| trace.reset(); |
| } |
