src/sim/drain.hh - arm/gem5 - Git at Google

 /*
  * Copyright (c) 2012, 2015, 2017 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Authors: Andreas Sandberg
  */

 #ifndef __SIM_DRAIN_HH__
 #define __SIM_DRAIN_HH__

 #include <atomic>
 #include <mutex>
 #include <vector>

 class Drainable;

 /**
  * Object drain/handover states
  *
  * An object starts out in the Running state. When the simulator
  * prepares to take a snapshot or prepares a CPU for handover, it
  * calls the drain() method to transfer the object into the Draining
  * or Drained state. If any object enters the Draining state
  * (Drainable::drain() returning >0), simulation continues until it
  * all objects have entered the Drained state.
  *
  * Before resuming simulation, the simulator calls resume() to
  * transfer the object to the Running state. This in turn results in a
  * call to drainResume() for all Drainable objects in the
  * simulator. New Drainable objects may be created while resuming. In
  * such cases, the new objects will be created in the Resuming state
  * and later resumed.
  *
  * \note Even though the state of an object (visible to the rest of
  * the world through Drainable::getState()) could be used to determine
  * if all objects have entered the Drained state, the protocol is
  * actually a bit more elaborate. See Drainable::drain() for details.
  */
 enum class DrainState {
     Running,  /** Running normally */
     Draining, /** Draining buffers pending serialization/handover */
     Drained,  /** Buffers drained, ready for serialization/handover */
     Resuming, /** Transient state while the simulator is resuming */
 };

 /**
  * This class coordinates draining of a System.
  *
  * When draining the simulator, we need to make sure that all
  * Drainable objects within the system have ended up in the drained
  * state before declaring the operation to be successful. This class
  * keeps track of how many objects are still in the process of
  * draining. Once it determines that all objects have drained their
  * state, it exits the simulation loop.
  *
  * @note A System might not be completely drained even though the
  * DrainManager has caused the simulation loop to exit. Draining needs
  * to be restarted until all Drainable objects declare that they don't
  * need further simulation to be completely drained. See Drainable for
  * more information.
  */
 class DrainManager
 {
   private:
     DrainManager();
     DrainManager(DrainManager &) = delete;
     ~DrainManager();

   public:
     /** Get the singleton DrainManager instance */
     static DrainManager &instance() { return _instance; }

     /**
      * Try to drain the system.
      *
      * Try to drain the system and return true if all objects are in a
      * the Drained state at which point the whole simulator is in a
      * consistent state and ready for checkpointing or CPU
      * handover. The simulation script must continue simulating until
      * the simulation loop returns "Finished drain", at which point
      * this method should be called again. This cycle should continue
      * until this method returns true.
      *
      * @return true if all objects were drained successfully, false if
      * more simulation is needed.
      */
     bool tryDrain();

     /**
      * Resume normal simulation in a Drained system.
      */
     void resume();

     /**
      * Run state fixups before a checkpoint restore operation
      *
      * The drain state of an object isn't stored in a checkpoint since
      * the whole system is always going to be in the Drained state
      * when the checkpoint is created. When the checkpoint is restored
      * at a later stage, recreated objects will be in the Running
      * state since the state isn't stored in checkpoints. This method
      * performs state fixups on all Drainable objects and the
      * DrainManager itself.
      */
     void preCheckpointRestore();

     /** Check if the system is drained */
     bool isDrained() const { return _state == DrainState::Drained; }

     /** Get the simulators global drain state */
     DrainState state() const { return _state; }

     /**
      * Notify the DrainManager that a Drainable object has finished
      * draining.
      */
     void signalDrainDone();

   public:
     void registerDrainable(Drainable *obj);
     void unregisterDrainable(Drainable *obj);

   private:
     /**
      * Helper function to check if all Drainable objects are in a
      * specific state.
      */
     bool allInState(DrainState state) const;

     /**
      * Thread-safe helper function to get the number of Drainable
      * objects in a system.
      */
     size_t drainableCount() const;

     /** Lock protecting the set of drainable objects */
     mutable std::mutex globalLock;

     /** Set of all drainable objects */
     std::vector<Drainable *> _allDrainable;

     /**
      * Number of objects still draining. This is flagged atomic since
      * it can be manipulated by SimObjects living in different
      * threads.
      */
     std::atomic_uint _count;

     /** Global simulator drain state */
     DrainState _state;

     /** Singleton instance of the drain manager */
     static DrainManager _instance;
 };

 /**
  * Interface for objects that might require draining before
  * checkpointing.
  *
  * An object's internal state needs to be drained when creating a
  * checkpoint, switching between CPU models, or switching between
  * timing models. Once the internal state has been drained from
  * <i>all</i> objects in the simulator, the objects are serialized to
  * disc or the configuration change takes place. The process works as
  * follows (see simulate.py for details):
  *
  * <ol>
  * <li>DrainManager::tryDrain() calls Drainable::drain() for every
  *     object in the system. Draining has completed if all of them
  *     return true. Otherwise, the drain manager keeps track of the
  *     objects that requested draining and waits for them to signal
  *     that they are done draining using the signalDrainDone() method.
  *
  * <li>Continue simulation. When an object has finished draining its
  *     internal state, it calls DrainManager::signalDrainDone() on the
  *     manager. The drain manager keeps track of the objects that
  *     haven't drained yet, simulation stops when the set of
  *     non-drained objects becomes empty.
  *
  * <li>Check if any object still needs draining
  *     (DrainManager::tryDrain()), if so repeat the process above.
  *
  * <li>Serialize objects, switch CPU model, or change timing model.
  *
  * <li>Call DrainManager::resume(), which in turn calls
  *     Drainable::drainResume() for all objects, and then continue the
  *     simulation.
  * </ol>
  *
  */
 class Drainable
 {
     friend class DrainManager;

   protected:
     Drainable();
     virtual ~Drainable();

     /**
      * Notify an object that it needs to drain its state.
      *
      * If the object does not need further simulation to drain
      * internal buffers, it returns DrainState::Drained and
      * automatically switches to the Drained state. If the object
      * needs more simulation, it returns DrainState::Draining and
      * automatically enters the Draining state. Other return values
      * are invalid.
      *
      * @note An object that has entered the Drained state can be
      * disturbed by other objects in the system and consequently stop
      * being drained. These perturbations are not visible in the drain
      * state. The simulator therefore repeats the draining process
      * until all objects return DrainState::Drained on the first call
      * to drain().
      *
      * @return DrainState::Drained if the object is drained at this
      * point in time, DrainState::Draining if it needs further
      * simulation.
      */
     virtual DrainState drain() = 0;

     /**
      * Resume execution after a successful drain.
      */
     virtual void drainResume() {};

     /**
      * Signal that an object is drained
      *
      * This method is designed to be called whenever an object enters
      * into a state where it is ready to be drained. The method is
      * safe to call multiple times and there is no need to check that
      * draining has been requested before calling this method.
      */
     void signalDrainDone() const {
         switch (_drainState) {
           case DrainState::Running:
           case DrainState::Drained:
           case DrainState::Resuming:
             return;
           case DrainState::Draining:
             _drainState = DrainState::Drained;
             _drainManager.signalDrainDone();
             return;
         }
     }

   public:
     /** Return the current drain state of an object. */
     DrainState drainState() const { return _drainState; }

     /**
      * Notify a child process of a fork.
      *
      * When calling fork in gem5, we need to ensure that resources
      * shared between the parent and the child are consistent. This
      * method is intended to be overloaded to handle that. For
      * example, an object could use this method to re-open input files
      * to get a separate file description with a private file offset.
      *
      * This method is only called in the child of the fork. The call
      * takes place in a drained system.
      */
     virtual void notifyFork() {};

   private:
     /** DrainManager interface to request a drain operation */
     DrainState dmDrain();
     /** DrainManager interface to request a resume operation */
     void dmDrainResume();

     /** Convenience reference to the drain manager */
     DrainManager &_drainManager;

     /**
      * Current drain state of the object. Needs to be mutable since
      * objects need to be able to signal that they have transitioned
      * into a Drained state even if the calling method is const.
      */
     mutable DrainState _drainState;
 };

 #endif
	/*
	* Copyright (c) 2012, 2015, 2017 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* Authors: Andreas Sandberg
	*/

	#ifndef __SIM_DRAIN_HH__
	#define __SIM_DRAIN_HH__

	#include <atomic>
	#include <mutex>
	#include <vector>

	class Drainable;

	/**
	* Object drain/handover states
	*
	* An object starts out in the Running state. When the simulator
	* prepares to take a snapshot or prepares a CPU for handover, it
	* calls the drain() method to transfer the object into the Draining
	* or Drained state. If any object enters the Draining state
	* (Drainable::drain() returning >0), simulation continues until it
	* all objects have entered the Drained state.
	*
	* Before resuming simulation, the simulator calls resume() to
	* transfer the object to the Running state. This in turn results in a
	* call to drainResume() for all Drainable objects in the
	* simulator. New Drainable objects may be created while resuming. In
	* such cases, the new objects will be created in the Resuming state
	* and later resumed.
	*
	* \note Even though the state of an object (visible to the rest of
	* the world through Drainable::getState()) could be used to determine
	* if all objects have entered the Drained state, the protocol is
	* actually a bit more elaborate. See Drainable::drain() for details.
	*/
	enum class DrainState {
	Running, /** Running normally */
	Draining, /** Draining buffers pending serialization/handover */
	Drained, /** Buffers drained, ready for serialization/handover */
	Resuming, /** Transient state while the simulator is resuming */
	};

	/**
	* This class coordinates draining of a System.
	*
	* When draining the simulator, we need to make sure that all
	* Drainable objects within the system have ended up in the drained
	* state before declaring the operation to be successful. This class
	* keeps track of how many objects are still in the process of
	* draining. Once it determines that all objects have drained their
	* state, it exits the simulation loop.
	*
	* @note A System might not be completely drained even though the
	* DrainManager has caused the simulation loop to exit. Draining needs
	* to be restarted until all Drainable objects declare that they don't
	* need further simulation to be completely drained. See Drainable for
	* more information.
	*/
	class DrainManager
	{
	private:
	DrainManager();
	DrainManager(DrainManager &) = delete;
	~DrainManager();

	public:
	/** Get the singleton DrainManager instance */
	static DrainManager &instance() { return _instance; }

	/**
	* Try to drain the system.
	*
	* Try to drain the system and return true if all objects are in a
	* the Drained state at which point the whole simulator is in a
	* consistent state and ready for checkpointing or CPU
	* handover. The simulation script must continue simulating until
	* the simulation loop returns "Finished drain", at which point
	* this method should be called again. This cycle should continue
	* until this method returns true.
	*
	* @return true if all objects were drained successfully, false if
	* more simulation is needed.
	*/
	bool tryDrain();

	/**
	* Resume normal simulation in a Drained system.
	*/
	void resume();

	/**
	* Run state fixups before a checkpoint restore operation
	*
	* The drain state of an object isn't stored in a checkpoint since
	* the whole system is always going to be in the Drained state
	* when the checkpoint is created. When the checkpoint is restored
	* at a later stage, recreated objects will be in the Running
	* state since the state isn't stored in checkpoints. This method
	* performs state fixups on all Drainable objects and the
	* DrainManager itself.
	*/
	void preCheckpointRestore();

	/** Check if the system is drained */
	bool isDrained() const { return _state == DrainState::Drained; }

	/** Get the simulators global drain state */
	DrainState state() const { return _state; }

	/**
	* Notify the DrainManager that a Drainable object has finished
	* draining.
	*/
	void signalDrainDone();

	public:
	void registerDrainable(Drainable *obj);
	void unregisterDrainable(Drainable *obj);

	private:
	/**
	* Helper function to check if all Drainable objects are in a
	* specific state.
	*/
	bool allInState(DrainState state) const;

	/**
	* Thread-safe helper function to get the number of Drainable
	* objects in a system.
	*/
	size_t drainableCount() const;

	/** Lock protecting the set of drainable objects */
	mutable std::mutex globalLock;

	/** Set of all drainable objects */
	std::vector<Drainable *> _allDrainable;

	/**
	* Number of objects still draining. This is flagged atomic since
	* it can be manipulated by SimObjects living in different
	* threads.
	*/
	std::atomic_uint _count;

	/** Global simulator drain state */
	DrainState _state;

	/** Singleton instance of the drain manager */
	static DrainManager _instance;
	};

	/**
	* Interface for objects that might require draining before
	* checkpointing.
	*
	* An object's internal state needs to be drained when creating a
	* checkpoint, switching between CPU models, or switching between
	* timing models. Once the internal state has been drained from
	* <i>all</i> objects in the simulator, the objects are serialized to
	* disc or the configuration change takes place. The process works as
	* follows (see simulate.py for details):
	*
	* <ol>
	* <li>DrainManager::tryDrain() calls Drainable::drain() for every
	* object in the system. Draining has completed if all of them
	* return true. Otherwise, the drain manager keeps track of the
	* objects that requested draining and waits for them to signal
	* that they are done draining using the signalDrainDone() method.
	*
	* <li>Continue simulation. When an object has finished draining its
	* internal state, it calls DrainManager::signalDrainDone() on the
	* manager. The drain manager keeps track of the objects that
	* haven't drained yet, simulation stops when the set of
	* non-drained objects becomes empty.
	*
	* <li>Check if any object still needs draining
	* (DrainManager::tryDrain()), if so repeat the process above.
	*
	* <li>Serialize objects, switch CPU model, or change timing model.
	*
	* <li>Call DrainManager::resume(), which in turn calls
	* Drainable::drainResume() for all objects, and then continue the
	* simulation.
	* </ol>
	*
	*/
	class Drainable
	{
	friend class DrainManager;

	protected:
	Drainable();
	virtual ~Drainable();

	/**
	* Notify an object that it needs to drain its state.
	*
	* If the object does not need further simulation to drain
	* internal buffers, it returns DrainState::Drained and
	* automatically switches to the Drained state. If the object
	* needs more simulation, it returns DrainState::Draining and
	* automatically enters the Draining state. Other return values
	* are invalid.
	*
	* @note An object that has entered the Drained state can be
	* disturbed by other objects in the system and consequently stop
	* being drained. These perturbations are not visible in the drain
	* state. The simulator therefore repeats the draining process
	* until all objects return DrainState::Drained on the first call
	* to drain().
	*
	* @return DrainState::Drained if the object is drained at this
	* point in time, DrainState::Draining if it needs further
	* simulation.
	*/
	virtual DrainState drain() = 0;

	/**
	* Resume execution after a successful drain.
	*/
	virtual void drainResume() {};

	/**
	* Signal that an object is drained
	*
	* This method is designed to be called whenever an object enters
	* into a state where it is ready to be drained. The method is
	* safe to call multiple times and there is no need to check that
	* draining has been requested before calling this method.
	*/
	void signalDrainDone() const {
	switch (_drainState) {
	case DrainState::Running:
	case DrainState::Drained:
	case DrainState::Resuming:
	return;
	case DrainState::Draining:
	_drainState = DrainState::Drained;
	_drainManager.signalDrainDone();
	return;
	}
	}

	public:
	/** Return the current drain state of an object. */
	DrainState drainState() const { return _drainState; }

	/**
	* Notify a child process of a fork.
	*
	* When calling fork in gem5, we need to ensure that resources
	* shared between the parent and the child are consistent. This
	* method is intended to be overloaded to handle that. For
	* example, an object could use this method to re-open input files
	* to get a separate file description with a private file offset.
	*
	* This method is only called in the child of the fork. The call
	* takes place in a drained system.
	*/
	virtual void notifyFork() {};

	private:
	/** DrainManager interface to request a drain operation */
	DrainState dmDrain();
	/** DrainManager interface to request a resume operation */
	void dmDrainResume();

	/** Convenience reference to the drain manager */
	DrainManager &_drainManager;

	/**
	* Current drain state of the object. Needs to be mutable since
	* objects need to be able to signal that they have transitioned
	* into a Drained state even if the calling method is const.
	*/
	mutable DrainState _drainState;
	};

	#endif