diff --git a/util/plot_dram/PlotPowerStates.py b/util/plot_dram/PlotPowerStates.py
new file mode 100755
index 0000000..8dca0e0
--- /dev/null
+++ b/util/plot_dram/PlotPowerStates.py
@@ -0,0 +1,308 @@
+# Copyright (c) 2017 ARM Limited
+# All rights reserved
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder.  You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Radhika Jagtap
+
+import matplotlib
+matplotlib.use('Agg')
+import matplotlib.pyplot as plt
+from matplotlib.font_manager import FontProperties
+import numpy as np
+import os
+
+# global results dict
+results = {}
+idleResults = {}
+
+# global vars for bank utilisation and seq_bytes values swept in the experiment
+bankUtilValues = []
+seqBytesValues = []
+delayValues = []
+
+# settings for 3 values of bank util and 3 values of seq_bytes
+stackHeight = 6.0
+stackWidth = 18.0
+barWidth = 0.5
+plotFontSize = 18
+
+States = ['IDLE', 'ACT', 'REF', 'ACT_PDN', 'PRE_PDN', 'SREF']
+
+EnergyStates = ['ACT_E',
+'PRE_E',
+'READ_E',
+'REF_E',
+'ACT_BACK_E',
+'PRE_BACK_E',
+'ACT_PDN_E',
+'PRE_PDN_E',
+'SREF_E']
+
+StackColors = {
+'IDLE' : 'black',       # time spent in states
+'ACT' : 'lightskyblue',
+'REF' : 'limegreen',
+'ACT_PDN' : 'crimson',
+'PRE_PDN' : 'orange',
+'SREF' : 'gold',
+'ACT_E' : 'lightskyblue',  # energy of states
+'PRE_E' : 'black',
+'READ_E' : 'white',
+'REF_E' : 'limegreen',
+'ACT_BACK_E' : 'lightgray',
+'PRE_BACK_E' : 'gray',
+'ACT_PDN_E' : 'crimson',
+'PRE_PDN_E' : 'orange',
+'SREF_E' : 'gold'
+}
+
+StatToKey = {
+'system.mem_ctrls_0.actEnergy'          : 'ACT_E',
+'system.mem_ctrls_0.preEnergy'          : 'PRE_E',
+'system.mem_ctrls_0.readEnergy'         : 'READ_E',
+'system.mem_ctrls_0.refreshEnergy'      : 'REF_E',
+'system.mem_ctrls_0.actBackEnergy'      : 'ACT_BACK_E',
+'system.mem_ctrls_0.preBackEnergy'      : 'PRE_BACK_E',
+'system.mem_ctrls_0.actPowerDownEnergy' : 'ACT_PDN_E',
+'system.mem_ctrls_0.prePowerDownEnergy' : 'PRE_PDN_E',
+'system.mem_ctrls_0.selfRefreshEnergy'  : 'SREF_E'
+}
+# Skipping write energy, the example script issues 100% reads by default
+# 'system.mem_ctrls_0.writeEnergy' : "WRITE"
+
+def plotLowPStates(plot_dir, stats_fname, bank_util_list, seqbytes_list,
+                   delay_list):
+    """
+    plotLowPStates generates plots by parsing statistics output by the DRAM
+    sweep simulation described in the the configs/dram/low_power_sweep.py
+    script.
+
+    The function outputs eps format images for the following plots
+    (1) time spent in the DRAM Power states as a stacked bar chart
+    (2) energy consumed by the DRAM Power states as a stacked bar chart
+    (3) idle plot for the last stats dump corresponding to an idle period
+
+    For all plots, the time and energy values of the first rank (i.e. rank0)
+    are plotted because the way the script is written means stats across ranks
+    are similar.
+
+    @param plot_dir: the dir to output the plots
+    @param stats_fname: the stats file name of the low power sweep sim
+    @param bank_util_list: list of bank utilisation values (e.g. [1, 4, 8])
+    @param seqbytes_list: list of seq_bytes values (e.g. [64, 456, 512])
+    @param delay_list: list of itt max multipliers (e.g. [1, 20, 200])
+
+    """
+    stats_file = open(stats_fname, 'r')
+
+    global bankUtilValues
+    bankUtilValues = bank_util_list
+
+    global seqBytesValues
+    seqBytesValues = seqbytes_list
+
+    global delayValues
+    delayValues = delay_list
+    initResults()
+
+    # throw away the first two lines of the stats file
+    stats_file.readline()
+    stats_file.readline() # the 'Begin' line
+
+    #######################################
+    # Parse stats file and gather results
+    ########################################
+
+    for delay in delayValues:
+        for bank_util in bankUtilValues:
+            for seq_bytes in seqBytesValues:
+
+                for line in stats_file:
+                    if 'Begin' in line:
+                        break
+
+                    if len(line.strip()) == 0:
+                        continue
+
+                    #### state time values ####
+                    if 'system.mem_ctrls_0.memoryStateTime' in line:
+                        # remove leading and trailing white spaces
+                        line = line.strip()
+                        # Example format:
+                        # 'system.mem_ctrls_0.memoryStateTime::ACT    1000000'
+                        statistic, stime = line.split()[0:2]
+                        # Now grab the state, i.e. 'ACT'
+                        state = statistic.split('::')[1]
+                        # store the value of the stat in the results dict
+                        results[delay][bank_util][seq_bytes][state] = \
+                            int(stime)
+                    #### state energy values ####
+                    elif line.strip().split()[0] in StatToKey.keys():
+                        # Example format:
+                        # system.mem_ctrls_0.actEnergy                 35392980
+                        statistic, e_val = line.strip().split()[0:2]
+                        senergy = int(float(e_val))
+                        state = StatToKey[statistic]
+                        # store the value of the stat in the results dict
+                        results[delay][bank_util][seq_bytes][state] = senergy
+
+    # To add last traffic gen idle period stats to the results dict
+    for line in stats_file:
+        if 'system.mem_ctrls_0.memoryStateTime' in line:
+            line = line.strip() # remove leading and trailing white spaces
+            # Example format:
+            # 'system.mem_ctrls_0.memoryStateTime::ACT    1000000'
+            statistic, stime = line.split()[0:2]
+            # Now grab the state energy, .e.g 'ACT'
+            state = statistic.split('::')[1]
+            idleResults[state] = int(stime)
+            if state == 'ACT_PDN':
+                break
+
+    ########################################
+    # Call plot functions
+    ########################################
+    # one plot per delay value
+    for delay in delayValues:
+        plot_path = plot_dir + delay + '-'
+
+        plotStackedStates(delay, States, 'IDLE', stateTimePlotName(plot_path),
+                          'Time (ps) spent in a power state')
+        plotStackedStates(delay, EnergyStates, 'ACT_E',
+                          stateEnergyPlotName(plot_path),
+                          'Energy (pJ) of a power state')
+    plotIdle(plot_dir)
+
+def plotIdle(plot_dir):
+    """
+    Create a bar chart for the time spent in power states during the idle phase
+
+    @param plot_dir: the dir to output the plots
+    """
+    fig, ax = plt.subplots()
+    width = 0.35
+    ind = np.arange(len(States))
+    l1 = ax.bar(ind, map(lambda x : idleResults[x], States), width)
+
+    ax.xaxis.set_ticks(ind + width/2)
+    ax.xaxis.set_ticklabels(States)
+    ax.set_ylabel('Time (ps) spent in a power state')
+    fig.suptitle("Idle 50 us")
+
+    print "saving plot:", idlePlotName(plot_dir)
+    plt.savefig(idlePlotName(plot_dir), format='eps')
+    plt.close(fig)
+
+def plotStackedStates(delay, states_list, bottom_state, plot_name, ylabel_str):
+    """
+    Create a stacked bar chart for the list that is passed in as arg, which
+    is either time spent or energy consumed in power states.
+
+    @param delay: one plot is output per delay value
+    @param states_list: list of either time or energy state names
+    @param bottom_state: the bottom-most component of the stacked bar
+    @param plot_name: the file name of the image to write the plot to
+    @param ylabel_str: Y-axis label depending on plotting time or energy
+    """
+    fig, ax = plt.subplots(1, len(bankUtilValues), sharey=True)
+    fig.set_figheight(stackHeight)
+    fig.set_figwidth(stackWidth)
+    width = barWidth
+    plt.rcParams.update({'font.size': plotFontSize})
+
+    # Get the number of seq_bytes values
+    N = len(seqBytesValues)
+    ind = np.arange(N)
+
+    for sub_idx, bank_util in enumerate(bankUtilValues):
+
+        l_states = {}
+        p_states = {}
+
+        # Must have a bottom of the stack first
+        state = bottom_state
+
+        l_states[state] = map(lambda x: results[delay][bank_util][x][state],
+                              seqBytesValues)
+        p_states[state] = ax[sub_idx].bar(ind, l_states[state], width,
+                                          color=StackColors[state])
+
+        time_sum = l_states[state]
+        for state in states_list[1:]:
+            l_states[state] = map(lambda x:
+                                  results[delay][bank_util][x][state],
+                                  seqBytesValues)
+            # Now add on top of the bottom = sum of values up until now
+            p_states[state] = ax[sub_idx].bar(ind, l_states[state], width,
+                                              color=StackColors[state],
+                                              bottom=time_sum)
+            # Now add the bit of the stack that we just ploted to the bottom
+            # resulting in a new bottom for the next iteration
+            time_sum = [prev_sum + new_s for prev_sum, new_s in \
+                zip(time_sum, l_states[state])]
+
+        ax[sub_idx].set_title('Bank util %s' % bank_util)
+        ax[sub_idx].xaxis.set_ticks(ind + width/2.)
+        ax[sub_idx].xaxis.set_ticklabels(seqBytesValues, rotation=45)
+        ax[sub_idx].set_xlabel('Seq. bytes')
+        if bank_util == bankUtilValues[0]:
+            ax[sub_idx].set_ylabel(ylabel_str)
+
+    myFontSize='small'
+    fontP = FontProperties()
+    fontP.set_size(myFontSize)
+    fig.legend(map(lambda x: p_states[x], states_list), states_list,
+               prop=fontP)
+
+    plt.savefig(plot_name,  format='eps', bbox_inches='tight')
+    print "saving plot:", plot_name
+    plt.close(fig)
+
+# These plat name functions are also called in the main script
+def idlePlotName(plot_dir):
+    return (plot_dir + 'idle.eps')
+
+def stateTimePlotName(plot_dir):
+    return (plot_dir + 'state-time.eps')
+
+def stateEnergyPlotName(plot_dir):
+    return (plot_dir + 'state-energy.eps')
+
+def initResults():
+    for delay in delayValues:
+        results[delay] = {}
+        for bank_util in bankUtilValues:
+            results[delay][bank_util] = {}
+            for seq_bytes in seqBytesValues:
+                results[delay][bank_util][seq_bytes] = {}
diff --git a/util/dram_lat_mem_rd_plot.py b/util/plot_dram/dram_lat_mem_rd_plot.py
similarity index 100%
rename from util/dram_lat_mem_rd_plot.py
rename to util/plot_dram/dram_lat_mem_rd_plot.py
diff --git a/util/dram_sweep_plot.py b/util/plot_dram/dram_sweep_plot.py
similarity index 100%
rename from util/dram_sweep_plot.py
rename to util/plot_dram/dram_sweep_plot.py
diff --git a/util/plot_dram/lowp_dram_sweep_plot.py b/util/plot_dram/lowp_dram_sweep_plot.py
new file mode 100755
index 0000000..469e8d1
--- /dev/null
+++ b/util/plot_dram/lowp_dram_sweep_plot.py
@@ -0,0 +1,151 @@
+#! /usr/bin/python
+#
+# Copyright (c) 2017 ARM Limited
+# All rights reserved
+#
+# The license below extends only to copyright in the software and shall
+# not be construed as granting a license to any other intellectual
+# property including but not limited to intellectual property relating
+# to a hardware implementation of the functionality of the software
+# licensed hereunder.  You may use the software subject to the license
+# terms below provided that you ensure that this notice is replicated
+# unmodified and in its entirety in all distributions of the software,
+# modified or unmodified, in source code or in binary form.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met: redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer;
+# redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution;
+# neither the name of the copyright holders nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Radhika Jagtap
+
+import PlotPowerStates as plotter
+import argparse
+import os
+from subprocess import call
+
+parser = argparse.ArgumentParser(formatter_class=
+                                 argparse.ArgumentDefaultsHelpFormatter)
+
+parser.add_argument("--statsfile", required=True, help="stats file path")
+
+parser.add_argument("--bankutils", default="b1 b2 b3", help="target bank " \
+                    "utilization values separated by space, e.g. \"1 4 8\"")
+
+parser.add_argument("--seqbytes", default="s1 s2 s3", help="no. of " \
+                    "sequential bytes requested by each traffic gen request." \
+                    " e.g. \"64 256 512\"")
+
+parser.add_argument("--delays", default="d1 d2 d3", help="string of delay"
+                    " values separated by a space. e.g. \"1 20 100\"")
+
+parser.add_argument("--outdir", help="directory to output plots",
+                    default='plot_test')
+
+parser.add_argument("--pdf", action='store_true', help="output Latex and pdf")
+
+def main():
+    args = parser.parse_args()
+    if not os.path.isfile(args.statsfile):
+        exit('Error! File not found: %s' % args.statsfile)
+    if not os.path.isdir(args.outdir):
+        os.mkdir(args.outdir)
+
+    bank_util_list = args.bankutils.strip().split()
+    seqbyte_list = args.seqbytes.strip().split()
+    delays = args.delays.strip().split()
+    plotter.plotLowPStates(args.outdir + '/', args.statsfile, bank_util_list,
+                           seqbyte_list, delays)
+
+    if args.pdf:
+        textwidth = '0.5'
+
+        ### Time and energy plots ###
+        #############################
+        # place tex and pdf files in outdir
+        os.chdir(args.outdir)
+        texfile_s = 'stacked_lowp_sweep.tex'
+        print "\t", texfile_s
+        outfile = open(texfile_s, 'w')
+
+        startDocText(outfile)
+        outfile.write("\\begin{figure} \n\centering\n")
+        ## Time plots for all delay values
+        for delay in delays:
+            # Time
+            filename = plotter.stateTimePlotName(str(delay) + '-')
+            outfile.write(wrapForGraphic(filename, textwidth))
+            outfile.write(getCaption(delay))
+        outfile.write("\end{figure}\n")
+
+        # Energy plots for all delay values
+        outfile.write("\\begin{figure} \n\centering\n")
+        for delay in delays:
+            # Energy
+            filename = plotter.stateEnergyPlotName(str(delay) + '-')
+            outfile.write(wrapForGraphic(filename, textwidth))
+            outfile.write(getCaption(delay))
+        outfile.write("\end{figure}\n")
+
+        endDocText(outfile)
+        outfile.close()
+
+        print "\n Generating pdf file"
+        print "*******************************"
+        print "\tpdflatex ", texfile_s
+        # Run pdflatex to generate to pdf
+        call(["pdflatex", texfile_s])
+        call(["open", texfile_s.split('.')[0] + '.pdf'])
+
+
+def getCaption(delay):
+    return ('\caption{' +
+            'itt delay = ' + str(delay) +
+            '}\n')
+
+def wrapForGraphic(filename, width='1.0'):
+    # \t is tab and needs to be escaped, therefore \\textwidth
+    return '\includegraphics[width=' + width + \
+        '\\textwidth]{' + filename + '}\n'
+
+def startDocText(outfile):
+
+    start_stuff = '''
+\documentclass[a4paper,landscape,twocolumn]{article}
+
+\usepackage{graphicx}
+\usepackage[margin=0.5cm]{geometry}
+\\begin{document}
+'''
+    outfile.write(start_stuff)
+
+def endDocText(outfile):
+
+    end_stuff = '''
+
+\end{document}
+
+'''
+    outfile.write(end_stuff)
+
+# Call main
+if __name__ == '__main__':
+    main()
\ No newline at end of file