/*
 * Copyright (c) 2010 ARM Limited
 * All rights reserved
 *
 * The license below extends only to copyright in the software and shall
 * not be construed as granting a license to any other intellectual
 * property including but not limited to intellectual property relating
 * to a hardware implementation of the functionality of the software
 * licensed hereunder.  You may use the software subject to the license
 * terms below provided that you ensure that this notice is replicated
 * unmodified and in its entirety in all distributions of the software,
 * modified or unmodified, in source code or in binary form.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Ali Saidi
 *          William Wang
 */

/** @file
 * Declaration of a VNC input
 */

#ifndef __BASE_VNC_VNC_INPUT_HH__
#define __BASE_VNC_VNC_INPUT_HH__

#include <iostream>

#include "base/vnc/convert.hh"
#include "base/bitmap.hh"
#include "params/VncInput.hh"
#include "sim/sim_object.hh"

/**
 * A device that expects to receive input from the vnc server should derrive
 * (through mulitple inheritence if necessary from VncKeyboard or VncMouse
 * and call setKeyboard() or setMouse() respectively on the vnc server.
 */
class VncKeyboard
{
  public:
    /**
     * Called when the vnc server receives a key press event from the
     * client.
     * @param key the key passed is an x11 keysym
     * @param down is the key now down or up?
     */
    virtual void keyPress(uint32_t key, bool down) = 0;
};

class VncMouse
{
  public:
    /**
     * called whenever the mouse moves or it's button state changes
     * buttons is a simple mask with each button (0-8) corresponding to
     * a bit position in the byte with 1 being down and 0 being up
     * @param x the x position of the mouse
     * @param y the y position of the mouse
     * @param buttos the button state as described above
     */
    virtual void mouseAt(uint16_t x, uint16_t y, uint8_t buttons) = 0;
};

class VncInput : public SimObject
{
  public:

    /** Client -> Server message IDs */
    enum ClientMessages {
        ClientSetPixelFormat    = 0,
        ClientSetEncodings      = 2,
        ClientFrameBufferUpdate = 3,
        ClientKeyEvent          = 4,
        ClientPointerEvent      = 5,
        ClientCutText           = 6
    };

    struct PixelFormat {
        uint8_t bpp;
        uint8_t depth;
        uint8_t bigendian;
        uint8_t truecolor;
        uint16_t redmax;
        uint16_t greenmax;
        uint16_t bluemax;
        uint8_t redshift;
        uint8_t greenshift;
        uint8_t blueshift;
        uint8_t padding[3];
    } M5_ATTR_PACKED;

    struct PixelFormatMessage {
        uint8_t type;
        uint8_t padding[3];
        PixelFormat px;
    } M5_ATTR_PACKED;

    struct PixelEncodingsMessage {
        uint8_t type;
        uint8_t padding;
        uint16_t num_encodings;
    } M5_ATTR_PACKED;

    struct FrameBufferUpdateReq {
        uint8_t type;
        uint8_t incremental;
        uint16_t x;
        uint16_t y;
        uint16_t width;
        uint16_t height;
    } M5_ATTR_PACKED;

    struct KeyEventMessage {
        uint8_t type;
        uint8_t down_flag;
        uint8_t padding[2];
        uint32_t key;
    } M5_ATTR_PACKED;

    struct PointerEventMessage {
        uint8_t type;
        uint8_t button_mask;
        uint16_t x;
        uint16_t y;
    } M5_ATTR_PACKED;

    struct ClientCutTextMessage {
        uint8_t type;
        uint8_t padding[3];
        uint32_t length;
    } M5_ATTR_PACKED;

    typedef VncInputParams Params;
    VncInput(const Params *p);

    /** Set the address of the frame buffer we are going to show.
     * To avoid copying, just have the display controller
     * tell us where the data is instead of constanly copying it around
     * @param rfb frame buffer that we're going to use
     */
    void
    setFramebufferAddr(uint8_t* rfb)
    {
        fbPtr = rfb;
    }

    /** Set up the device that would like to receive notifications when keys are
     * pressed in the vnc client keyboard
     * @param _keyboard an object that derrives from VncKeyboard
     */
    void setKeyboard(VncKeyboard *_keyboard) { keyboard = _keyboard; }

    /** Setup the device that would like to receive notifications when mouse
     * movements or button presses are received from the vnc client.
     * @param _mouse an object that derrives from VncMouse
     */
    void setMouse(VncMouse *_mouse) { mouse = _mouse; }

    /** What is the width of the screen we're displaying.
     * This is used for pointer/tablet devices that need to know to calculate
     * the correct value to send to the device driver.
     * @return the width of the simulated screen
     */
    uint16_t videoWidth() const { return _videoWidth; }

    /** What is the height of the screen we're displaying.
     * This is used for pointer/tablet devices that need to know to calculate
     * the correct value to send to the device driver.
     * @return the height of the simulated screen
     */
    uint16_t videoHeight() const { return _videoHeight; }

    /** The frame buffer uses this call to notify the vnc server that
     * the frame buffer has been updated and a new image needs to be sent to the
     * client
     */
    virtual void setDirty()
    {
        if (captureEnabled)
            captureFrameBuffer();
    }

    /** Set the mode of the data the frame buffer will be sending us
     * @param mode the mode
     */
    virtual void setFrameBufferParams(VideoConvert::Mode mode, uint16_t width, uint16_t height);

  protected:
    /** The device to notify when we get key events */
    VncKeyboard *keyboard;

    /** The device to notify when we get mouse events */
    VncMouse *mouse;

    /** The video converter that transforms data for us */
    VideoConvert *vc;

    /** pointer to the actual data that is stored in the frame buffer device */
    uint8_t* fbPtr;

    /** The mode of data we're getting frame buffer in */
    VideoConvert::Mode videoMode;

    /** the width of the frame buffer we are sending to the client */
    uint16_t _videoWidth;

    /** the height of the frame buffer we are sending to the client */
    uint16_t _videoHeight;

    /** Flag indicating whether to capture snapshots of frame buffer or not */
    bool captureEnabled;

    /** Current frame number being captured to a file */
    int captureCurrentFrame;

    /** Directory to store captured frames to */
    std::string captureOutputDirectory;

    /** Computed hash of the last captured frame */
    uint64_t captureLastHash;

    /** Cached bitmap object for writing out frame buffers to file */
    Bitmap *captureBitmap;

    /** Captures the current frame buffer to a file */
    void captureFrameBuffer();
};
#endif