/*
 * Copyright (C) 2013 ARM Ltd.
 * Copyright (C) 2013 Linaro.
 *
 * This code is based on glibc cortex strings work originally authored by Linaro
 * and re-licensed under GPLv2 for the Linux kernel. The original code can
 * be found @
 *
 * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
 * files/head:/src/aarch64/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/linkage.h>
#include <asm/assembler.h>

/*
 * Copy a buffer from src to dest (alignment handled by the hardware)
 *
 * Parameters:
 *	x0 - dest
 *	x1 - src
 *	x2 - n
 * Returns:
 *	x0 - dest
 */
dstin	.req	x0
src	.req	x1
count	.req	x2
tmp1	.req	x3
tmp1w	.req	w3
tmp2	.req	x4
tmp2w	.req	w4
tmp3	.req	x5
tmp3w	.req	w5
dst	.req	x6

A_l	.req	x7
A_h	.req	x8
B_l	.req	x9
B_h	.req	x10
C_l	.req	x11
C_h	.req	x12
D_l	.req	x13
D_h	.req	x14

ENTRY(memcpy)
	mov	dst, dstin
	cmp	count, #16
	/*When memory length is less than 16, the accessed are not aligned.*/
	b.lo	.Ltiny15

	neg	tmp2, src
	ands	tmp2, tmp2, #15/* Bytes to reach alignment. */
	b.eq	.LSrcAligned
	sub	count, count, tmp2
	/*
	* Copy the leading memory data from src to dst in an increasing
	* address order.By this way,the risk of overwritting the source
	* memory data is eliminated when the distance between src and
	* dst is not less than 16. The memory accesses here are
	* alignment.
	*/
	tbz	tmp2, #0, 1f
	ldrb	tmp1w, [src], #1
	strb	tmp1w, [dst], #1
1:
	tbz	tmp2, #1, 2f
	ldrh	tmp1w, [src], #2
	strh	tmp1w, [dst], #2
2:
	tbz	tmp2, #2, 3f
	ldr	tmp1w, [src], #4
	str	tmp1w, [dst], #4
3:
	tbz	tmp2, #3, .LSrcAligned
	ldr	tmp1, [src],#8
	str	tmp1, [dst],#8

.LSrcAligned:
	cmp	count, #64
	b.ge	.Lcpy_over64
	/*
	* Deal with small copies quickly by dropping straight into the
	* exit block.
	*/
.Ltail63:
	/*
	* Copy up to 48 bytes of data. At this point we only need the
	* bottom 6 bits of count to be accurate.
	*/
	ands	tmp1, count, #0x30
	b.eq	.Ltiny15
	cmp	tmp1w, #0x20
	b.eq	1f
	b.lt	2f
	ldp	A_l, A_h, [src], #16
	stp	A_l, A_h, [dst], #16
1:
	ldp	A_l, A_h, [src], #16
	stp	A_l, A_h, [dst], #16
2:
	ldp	A_l, A_h, [src], #16
	stp	A_l, A_h, [dst], #16
.Ltiny15:
	/*
	* To make memmove simpler, we prefer to break one ldp/stp into
	* several load/store to access memory in an increasing address order,
	* rather than load/store 16 bytes just as the old cortex memcpy.
	* The process in original cortex need to satisfy the procondition
	* that the src address is at least 16 bytes bigger than dst address,
	* otherwise some source data will be overwritten.
	*/
	tbz	count, #3, 1f
	ldr	tmp1, [src], #8
	str	tmp1, [dst], #8
1:
	tbz	count, #2, 2f
	ldr	tmp1w, [src], #4
	str	tmp1w, [dst], #4
2:
	tbz	count, #1, 3f
	ldrh	tmp1w, [src], #2
	strh	tmp1w, [dst], #2
3:
	tbz	count, #0, .Lexitfunc
	ldrb	tmp1w, [src]
	strb	tmp1w, [dst]

.Lexitfunc:
	ret

.Lcpy_over64:
	subs	count, count, #128
	b.ge	.Lcpy_body_large
	/*
	* Less than 128 bytes to copy, so handle 64 here and then jump
	* to the tail.
	*/
	ldp	A_l, A_h, [src],#16
	stp	A_l, A_h, [dst],#16
	ldp	B_l, B_h, [src],#16
	ldp	C_l, C_h, [src],#16
	stp	B_l, B_h, [dst],#16
	stp	C_l, C_h, [dst],#16
	ldp	D_l, D_h, [src],#16
	stp	D_l, D_h, [dst],#16

	tst	count, #0x3f
	b.ne	.Ltail63
	ret

	/*
	* Critical loop.  Start at a new cache line boundary.  Assuming
	* 64 bytes per line this ensures the entire loop is in one line.
	*/
	.p2align	6
.Lcpy_body_large:
	/* pre-get 64 bytes data. */
	ldp	A_l, A_h, [src],#16
	ldp	B_l, B_h, [src],#16
	ldp	C_l, C_h, [src],#16
	ldp	D_l, D_h, [src],#16
1:
	/*
	* interlace the load of next 64 bytes data block with store of the last
	* loaded 64 bytes data.
	*/
	stp	A_l, A_h, [dst],#16
	ldp	A_l, A_h, [src],#16
	stp	B_l, B_h, [dst],#16
	ldp	B_l, B_h, [src],#16
	stp	C_l, C_h, [dst],#16
	ldp	C_l, C_h, [src],#16
	stp	D_l, D_h, [dst],#16
	ldp	D_l, D_h, [src],#16
	subs	count, count, #64
	b.ge	1b
	stp	A_l, A_h, [dst],#16
	stp	B_l, B_h, [dst],#16
	stp	C_l, C_h, [dst],#16
	stp	D_l, D_h, [dst],#16

	tst	count, #0x3f
	b.ne	.Ltail63
	ret
ENDPROC(memcpy)