#
# IP netfilter configuration
#

menu "IP: Netfilter Configuration"
	depends on INET && NETFILTER

config NF_DEFRAG_IPV4
	tristate
	default n

config NF_CONNTRACK_IPV4
	tristate "IPv4 connection tracking support (required for NAT)"
	depends on NF_CONNTRACK
	default m if NETFILTER_ADVANCED=n
	select NF_DEFRAG_IPV4
	---help---
	  Connection tracking keeps a record of what packets have passed
	  through your machine, in order to figure out how they are related
	  into connections.

	  This is IPv4 support on Layer 3 independent connection tracking.
	  Layer 3 independent connection tracking is experimental scheme
	  which generalize ip_conntrack to support other layer 3 protocols.

	  To compile it as a module, choose M here.  If unsure, say N.

config NF_CONNTRACK_PROC_COMPAT
	bool "proc/sysctl compatibility with old connection tracking"
	depends on NF_CONNTRACK_PROCFS && NF_CONNTRACK_IPV4
	default y
	help
	  This option enables /proc and sysctl compatibility with the old
	  layer 3 dependent connection tracking. This is needed to keep
	  old programs that have not been adapted to the new names working.

	  If unsure, say Y.

config NF_TABLES_IPV4
	depends on NF_TABLES
	tristate "IPv4 nf_tables support"

config NFT_REJECT_IPV4
	depends on NF_TABLES_IPV4
	tristate "nf_tables IPv4 reject support"

config NFT_CHAIN_ROUTE_IPV4
	depends on NF_TABLES_IPV4
	tristate "IPv4 nf_tables route chain support"

config NFT_CHAIN_NAT_IPV4
	depends on NF_TABLES_IPV4
	depends on NF_NAT_IPV4 && NFT_NAT
	tristate "IPv4 nf_tables nat chain support"

config NF_TABLES_ARP
	depends on NF_TABLES
	tristate "ARP nf_tables support"

config IP_NF_IPTABLES
	tristate "IP tables support (required for filtering/masq/NAT)"
	default m if NETFILTER_ADVANCED=n
	select NETFILTER_XTABLES
	help
	  iptables is a general, extensible packet identification framework.
	  The packet filtering and full NAT (masquerading, port forwarding,
	  etc) subsystems now use this: say `Y' or `M' here if you want to use
	  either of those.

	  To compile it as a module, choose M here.  If unsure, say N.

if IP_NF_IPTABLES

# The matches.
config IP_NF_MATCH_AH
	tristate '"ah" match support'
	depends on NETFILTER_ADVANCED
	help
	  This match extension allows you to match a range of SPIs
	  inside AH header of IPSec packets.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_MATCH_ECN
	tristate '"ecn" match support'
	depends on NETFILTER_ADVANCED
	select NETFILTER_XT_MATCH_ECN
	---help---
	This is a backwards-compat option for the user's convenience
	(e.g. when running oldconfig). It selects
	CONFIG_NETFILTER_XT_MATCH_ECN.

config IP_NF_MATCH_RPFILTER
	tristate '"rpfilter" reverse path filter match support'
	depends on NETFILTER_ADVANCED && (IP_NF_MANGLE || IP_NF_RAW)
	---help---
	  This option allows you to match packets whose replies would
	  go out via the interface the packet came in.

	  To compile it as a module, choose M here.  If unsure, say N.
	  The module will be called ipt_rpfilter.

config IP_NF_MATCH_TTL
	tristate '"ttl" match support'
	depends on NETFILTER_ADVANCED
	select NETFILTER_XT_MATCH_HL
	---help---
	This is a backwards-compat option for the user's convenience
	(e.g. when running oldconfig). It selects
	CONFIG_NETFILTER_XT_MATCH_HL.

# `filter', generic and specific targets
config IP_NF_FILTER
	tristate "Packet filtering"
	default m if NETFILTER_ADVANCED=n
	help
	  Packet filtering defines a table `filter', which has a series of
	  rules for simple packet filtering at local input, forwarding and
	  local output.  See the man page for iptables(8).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_REJECT
	tristate "REJECT target support"
	depends on IP_NF_FILTER
	default m if NETFILTER_ADVANCED=n
	help
	  The REJECT target allows a filtering rule to specify that an ICMP
	  error should be issued in response to an incoming packet, rather
	  than silently being dropped.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_REJECT_SKERR
	bool "Force socket error when rejecting with icmp*"
	depends on IP_NF_TARGET_REJECT
	default n
	help
          This option enables turning a "--reject-with icmp*" into a matching
          socket error also.
	  The REJECT target normally allows sending an ICMP message. But it
          leaves the local socket unaware of any ingress rejects.

	  If unsure, say N.

config IP_NF_TARGET_SYNPROXY
	tristate "SYNPROXY target support"
	depends on NF_CONNTRACK && NETFILTER_ADVANCED
	select NETFILTER_SYNPROXY
	select SYN_COOKIES
	help
	  The SYNPROXY target allows you to intercept TCP connections and
	  establish them using syncookies before they are passed on to the
	  server. This allows to avoid conntrack and server resource usage
	  during SYN-flood attacks.

	  To compile it as a module, choose M here. If unsure, say N.

config IP_NF_TARGET_ULOG
	tristate "ULOG target support (obsolete)"
	default m if NETFILTER_ADVANCED=n
	---help---

	  This option enables the old IPv4-only "ipt_ULOG" implementation
	  which has been obsoleted by the new "nfnetlink_log" code (see
	  CONFIG_NETFILTER_NETLINK_LOG).

	  This option adds a `ULOG' target, which allows you to create rules in
	  any iptables table. The packet is passed to a userspace logging
	  daemon using netlink multicast sockets; unlike the LOG target
	  which can only be viewed through syslog.

	  The appropriate userspace logging daemon (ulogd) may be obtained from
	  <http://www.netfilter.org/projects/ulogd/index.html>

	  To compile it as a module, choose M here.  If unsure, say N.

# NAT + specific targets: nf_conntrack
config NF_NAT_IPV4
	tristate "IPv4 NAT"
	depends on NF_CONNTRACK_IPV4
	default m if NETFILTER_ADVANCED=n
	select NF_NAT
	help
	  The IPv4 NAT option allows masquerading, port forwarding and other
	  forms of full Network Address Port Translation.  It is controlled by
	  the `nat' table in iptables: see the man page for iptables(8).

	  To compile it as a module, choose M here.  If unsure, say N.

if NF_NAT_IPV4

config IP_NF_TARGET_MASQUERADE
	tristate "MASQUERADE target support"
	default m if NETFILTER_ADVANCED=n
	help
	  Masquerading is a special case of NAT: all outgoing connections are
	  changed to seem to come from a particular interface's address, and
	  if the interface goes down, those connections are lost.  This is
	  only useful for dialup accounts with dynamic IP address (ie. your IP
	  address will be different on next dialup).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_NETMAP
	tristate "NETMAP target support"
	depends on NETFILTER_ADVANCED
	select NETFILTER_XT_TARGET_NETMAP
	---help---
	This is a backwards-compat option for the user's convenience
	(e.g. when running oldconfig). It selects
	CONFIG_NETFILTER_XT_TARGET_NETMAP.

config IP_NF_TARGET_REDIRECT
	tristate "REDIRECT target support"
	depends on NETFILTER_ADVANCED
	select NETFILTER_XT_TARGET_REDIRECT
	---help---
	This is a backwards-compat option for the user's convenience
	(e.g. when running oldconfig). It selects
	CONFIG_NETFILTER_XT_TARGET_REDIRECT.

endif

config NF_NAT_SNMP_BASIC
	tristate "Basic SNMP-ALG support"
	depends on NF_CONNTRACK_SNMP && NF_NAT_IPV4
	depends on NETFILTER_ADVANCED
	default NF_NAT && NF_CONNTRACK_SNMP
	---help---

	  This module implements an Application Layer Gateway (ALG) for
	  SNMP payloads.  In conjunction with NAT, it allows a network
	  management system to access multiple private networks with
	  conflicting addresses.  It works by modifying IP addresses
	  inside SNMP payloads to match IP-layer NAT mapping.

	  This is the "basic" form of SNMP-ALG, as described in RFC 2962

	  To compile it as a module, choose M here.  If unsure, say N.

# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker.
# From kconfig-language.txt:
#
#           <expr> '&&' <expr>                   (6)
#
# (6) Returns the result of min(/expr/, /expr/).

config NF_NAT_PROTO_GRE
	tristate
	depends on NF_NAT_IPV4 && NF_CT_PROTO_GRE

config NF_NAT_PPTP
	tristate
	depends on NF_CONNTRACK && NF_NAT_IPV4
	default NF_NAT_IPV4 && NF_CONNTRACK_PPTP
	select NF_NAT_PROTO_GRE

config NF_NAT_H323
	tristate
	depends on NF_CONNTRACK && NF_NAT_IPV4
	default NF_NAT_IPV4 && NF_CONNTRACK_H323

# mangle + specific targets
config IP_NF_MANGLE
	tristate "Packet mangling"
	default m if NETFILTER_ADVANCED=n
	help
	  This option adds a `mangle' table to iptables: see the man page for
	  iptables(8).  This table is used for various packet alterations
	  which can effect how the packet is routed.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_CLUSTERIP
	tristate "CLUSTERIP target support"
	depends on IP_NF_MANGLE
	depends on NF_CONNTRACK_IPV4
	depends on NETFILTER_ADVANCED
	select NF_CONNTRACK_MARK
	help
	  The CLUSTERIP target allows you to build load-balancing clusters of
	  network servers without having a dedicated load-balancing
	  router/server/switch.
	
	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_ECN
	tristate "ECN target support"
	depends on IP_NF_MANGLE
	depends on NETFILTER_ADVANCED
	---help---
	  This option adds a `ECN' target, which can be used in the iptables mangle
	  table.  

	  You can use this target to remove the ECN bits from the IPv4 header of
	  an IP packet.  This is particularly useful, if you need to work around
	  existing ECN blackholes on the internet, but don't want to disable
	  ECN support in general.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_TTL
	tristate '"TTL" target support'
	depends on NETFILTER_ADVANCED && IP_NF_MANGLE
	select NETFILTER_XT_TARGET_HL
	---help---
	This is a backwards-compatible option for the user's convenience
	(e.g. when running oldconfig). It selects
	CONFIG_NETFILTER_XT_TARGET_HL.

# raw + specific targets
config IP_NF_RAW
	tristate  'raw table support (required for NOTRACK/TRACE)'
	help
	  This option adds a `raw' table to iptables. This table is the very
	  first in the netfilter framework and hooks in at the PREROUTING
	  and OUTPUT chains.
	
	  If you want to compile it as a module, say M here and read
	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.

# security table for MAC policy
config IP_NF_SECURITY
	tristate "Security table"
	depends on SECURITY
	depends on NETFILTER_ADVANCED
	help
	  This option adds a `security' table to iptables, for use
	  with Mandatory Access Control (MAC) policy.
	 
	  If unsure, say N.

endif # IP_NF_IPTABLES

# ARP tables
config IP_NF_ARPTABLES
	tristate "ARP tables support"
	select NETFILTER_XTABLES
	depends on NETFILTER_ADVANCED
	help
	  arptables is a general, extensible packet identification framework.
	  The ARP packet filtering and mangling (manipulation)subsystems
	  use this: say Y or M here if you want to use either of those.

	  To compile it as a module, choose M here.  If unsure, say N.

if IP_NF_ARPTABLES

config IP_NF_ARPFILTER
	tristate "ARP packet filtering"
	help
	  ARP packet filtering defines a table `filter', which has a series of
	  rules for simple ARP packet filtering at local input and
	  local output.  On a bridge, you can also specify filtering rules
	  for forwarded ARP packets. See the man page for arptables(8).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_ARP_MANGLE
	tristate "ARP payload mangling"
	help
	  Allows altering the ARP packet payload: source and destination
	  hardware and network addresses.

endif # IP_NF_ARPTABLES

endmenu