blob: 6aab72bf67ea96280796eda3251e4a9e634f0a92 [file] [log] [blame]
* Clock bindings for Freescale i.MX6 Quad
Required properties:
- compatible: Should be "fsl,imx6q-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
clocks and IDs.
Clock ID
---------------------------
dummy 0
ckil 1
ckih 2
osc 3
pll2_pfd0_352m 4
pll2_pfd1_594m 5
pll2_pfd2_396m 6
pll3_pfd0_720m 7
pll3_pfd1_540m 8
pll3_pfd2_508m 9
pll3_pfd3_454m 10
pll2_198m 11
pll3_120m 12
pll3_80m 13
pll3_60m 14
twd 15
step 16
pll1_sw 17
periph_pre 18
periph2_pre 19
periph_clk2_sel 20
periph2_clk2_sel 21
axi_sel 22
esai_sel 23
asrc_sel 24
spdif_sel 25
gpu2d_axi 26
gpu3d_axi 27
gpu2d_core_sel 28
gpu3d_core_sel 29
gpu3d_shader_sel 30
ipu1_sel 31
ipu2_sel 32
ldb_di0_sel 33
ldb_di1_sel 34
ipu1_di0_pre_sel 35
ipu1_di1_pre_sel 36
ipu2_di0_pre_sel 37
ipu2_di1_pre_sel 38
ipu1_di0_sel 39
ipu1_di1_sel 40
ipu2_di0_sel 41
ipu2_di1_sel 42
hsi_tx_sel 43
pcie_axi_sel 44
ssi1_sel 45
ssi2_sel 46
ssi3_sel 47
usdhc1_sel 48
usdhc2_sel 49
usdhc3_sel 50
usdhc4_sel 51
enfc_sel 52
emi_sel 53
emi_slow_sel 54
vdo_axi_sel 55
vpu_axi_sel 56
cko1_sel 57
periph 58
periph2 59
periph_clk2 60
periph2_clk2 61
ipg 62
ipg_per 63
esai_pred 64
esai_podf 65
asrc_pred 66
asrc_podf 67
spdif_pred 68
spdif_podf 69
can_root 70
ecspi_root 71
gpu2d_core_podf 72
gpu3d_core_podf 73
gpu3d_shader 74
ipu1_podf 75
ipu2_podf 76
ldb_di0_podf 77
ldb_di1_podf 78
ipu1_di0_pre 79
ipu1_di1_pre 80
ipu2_di0_pre 81
ipu2_di1_pre 82
hsi_tx_podf 83
ssi1_pred 84
ssi1_podf 85
ssi2_pred 86
ssi2_podf 87
ssi3_pred 88
ssi3_podf 89
uart_serial_podf 90
usdhc1_podf 91
usdhc2_podf 92
usdhc3_podf 93
usdhc4_podf 94
enfc_pred 95
enfc_podf 96
emi_podf 97
emi_slow_podf 98
vpu_axi_podf 99
cko1_podf 100
axi 101
mmdc_ch0_axi_podf 102
mmdc_ch1_axi_podf 103
arm 104
ahb 105
apbh_dma 106
asrc 107
can1_ipg 108
can1_serial 109
can2_ipg 110
can2_serial 111
ecspi1 112
ecspi2 113
ecspi3 114
ecspi4 115
ecspi5 116
enet 117
esai 118
gpt_ipg 119
gpt_ipg_per 120
gpu2d_core 121
gpu3d_core 122
hdmi_iahb 123
hdmi_isfr 124
i2c1 125
i2c2 126
i2c3 127
iim 128
enfc 129
ipu1 130
ipu1_di0 131
ipu1_di1 132
ipu2 133
ipu2_di0 134
ldb_di0 135
ldb_di1 136
ipu2_di1 137
hsi_tx 138
mlb 139
mmdc_ch0_axi 140
mmdc_ch1_axi 141
ocram 142
openvg_axi 143
pcie_axi 144
pwm1 145
pwm2 146
pwm3 147
pwm4 148
per1_bch 149
gpmi_bch_apb 150
gpmi_bch 151
gpmi_io 152
gpmi_apb 153
sata 154
sdma 155
spba 156
ssi1 157
ssi2 158
ssi3 159
uart_ipg 160
uart_serial 161
usboh3 162
usdhc1 163
usdhc2 164
usdhc3 165
usdhc4 166
vdo_axi 167
vpu_axi 168
cko1 169
pll1_sys 170
pll2_bus 171
pll3_usb_otg 172
pll4_audio 173
pll5_video 174
pll8_mlb 175
pll7_usb_host 176
pll6_enet 177
ssi1_ipg 178
ssi2_ipg 179
ssi3_ipg 180
rom 181
usbphy1 182
usbphy2 183
ldb_di0_div_3_5 184
ldb_di1_div_3_5 185
sata_ref 186
sata_ref_100m 187
pcie_ref 188
pcie_ref_125m 189
enet_ref 190
usbphy1_gate 191
usbphy2_gate 192
pll4_post_div 193
pll5_post_div 194
pll5_video_div 195
eim_slow 196
spdif 197
cko2_sel 198
cko2_podf 199
cko2 200
cko 201
vdoa 202
pll4_audio_div 203
lvds1_sel 204
lvds2_sel 205
lvds1_gate 206
lvds2_gate 207
Examples:
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
#clock-cells = <1>;
};
uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
status = "disabled";
};