blob: 1413f39912d3acc3fbb8b5557909557e7500a1c0 [file] [log] [blame]
* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
Required properties:
- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
Optional properties:
- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
Sub-nodes:
- leds : Contain the led nodes and initial register values in property
"led-control". Number of register depends of used IC, for MC13783 is 6,
for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
these registers.
- #address-cells: Must be 1.
- #size-cells: Must be 0.
Each led node should contain "reg", which used as LED ID (described below).
Optional properties "label" and "linux,default-trigger" is described in
Documentation/devicetree/bindings/leds/common.txt.
- regulators : Contain the regulator nodes. The regulators are bound using
their names as listed below with their registers and bits for enabling.
MC13783 LED IDs:
0 : Main display
1 : AUX display
2 : Keypad
3 : Red 1
4 : Green 1
5 : Blue 1
6 : Red 2
7 : Green 2
8 : Blue 2
9 : Red 3
10 : Green 3
11 : Blue 3
MC13892 LED IDs:
0 : Main display
1 : AUX display
2 : Keypad
3 : Red
4 : Green
5 : Blue
MC34708 LED IDs:
0 : Charger Red
1 : Charger Green
MC13783 regulators:
sw1a : regulator SW1A (register 24, bit 0)
sw1b : regulator SW1B (register 25, bit 0)
sw2a : regulator SW2A (register 26, bit 0)
sw2b : regulator SW2B (register 27, bit 0)
sw3 : regulator SW3 (register 29, bit 20)
vaudio : regulator VAUDIO (register 32, bit 0)
viohi : regulator VIOHI (register 32, bit 3)
violo : regulator VIOLO (register 32, bit 6)
vdig : regulator VDIG (register 32, bit 9)
vgen : regulator VGEN (register 32, bit 12)
vrfdig : regulator VRFDIG (register 32, bit 15)
vrfref : regulator VRFREF (register 32, bit 18)
vrfcp : regulator VRFCP (register 32, bit 21)
vsim : regulator VSIM (register 33, bit 0)
vesim : regulator VESIM (register 33, bit 3)
vcam : regulator VCAM (register 33, bit 6)
vrfbg : regulator VRFBG (register 33, bit 9)
vvib : regulator VVIB (register 33, bit 11)
vrf1 : regulator VRF1 (register 33, bit 12)
vrf2 : regulator VRF2 (register 33, bit 15)
vmmc1 : regulator VMMC1 (register 33, bit 18)
vmmc2 : regulator VMMC2 (register 33, bit 21)
gpo1 : regulator GPO1 (register 34, bit 6)
gpo2 : regulator GPO2 (register 34, bit 8)
gpo3 : regulator GPO3 (register 34, bit 10)
gpo4 : regulator GPO4 (register 34, bit 12)
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
MC13892 regulators:
vcoincell : regulator VCOINCELL (register 13, bit 23)
sw1 : regulator SW1 (register 24, bit 0)
sw2 : regulator SW2 (register 25, bit 0)
sw3 : regulator SW3 (register 26, bit 0)
sw4 : regulator SW4 (register 27, bit 0)
swbst : regulator SWBST (register 29, bit 20)
vgen1 : regulator VGEN1 (register 32, bit 0)
viohi : regulator VIOHI (register 32, bit 3)
vdig : regulator VDIG (register 32, bit 9)
vgen2 : regulator VGEN2 (register 32, bit 12)
vpll : regulator VPLL (register 32, bit 15)
vusb2 : regulator VUSB2 (register 32, bit 18)
vgen3 : regulator VGEN3 (register 33, bit 0)
vcam : regulator VCAM (register 33, bit 6)
vvideo : regulator VVIDEO (register 33, bit 12)
vaudio : regulator VAUDIO (register 33, bit 15)
vsd : regulator VSD (register 33, bit 18)
gpo1 : regulator GPO1 (register 34, bit 6)
gpo2 : regulator GPO2 (register 34, bit 8)
gpo3 : regulator GPO3 (register 34, bit 10)
gpo4 : regulator GPO4 (register 34, bit 12)
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
vusb : regulator VUSB (register 50, bit 3)
The bindings details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
Examples:
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
<&gpio4 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
interrupt-parent = <&gpio0>;
interrupts = <8>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led-control = <0x000 0x000 0x0e0 0x000>;
sysled {
reg = <3>;
label = "system:red:live";
linux,default-trigger = "heartbeat";
};
};
regulators {
sw1_reg: mc13892__sw1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1375000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: mc13892__sw2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};