drivers/leds/leds-lp5523.c: perform SW reset before detection
Chip detection may fail if the chip is in some odd state for example after
system restart. Chip doesn't have HW reset line.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 4248d78..0cc4ead 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -203,13 +203,6 @@
{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
};
- lp5523_write(client, LP5523_REG_RESET, 0xff);
-
- usleep_range(10000, 20000); /*
- * Exact value is not available. 10 - 20ms
- * appears to be enough for reset.
- */
-
ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
usleep_range(1000, 2000);
@@ -941,6 +934,11 @@
usleep_range(1000, 2000); /* 500us abs min. */
}
+ lp5523_write(client, LP5523_REG_RESET, 0xff);
+ usleep_range(10000, 20000); /*
+ * Exact value is not available. 10 - 20ms
+ * appears to be enough for reset.
+ */
ret = lp5523_detect(client);
if (ret)
goto fail2;
