[PATCH] USB: central handling for host controllers that were reset during suspend/resume
This patch (as515b) adds a routine to usbcore to simplify handling of
host controllers that lost power or were reset during suspend/resume.
The new core routine marks all the child devices of the root hub as
NOTATTACHED and tells khubd to disconnect the device structures as soon
as possible.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index c8a1b35..591b5aa 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -380,6 +380,7 @@
#ifdef CONFIG_PM
extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd);
extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
+extern void usb_root_hub_lost_power (struct usb_device *rhdev);
extern int hcd_bus_suspend (struct usb_bus *bus);
extern int hcd_bus_resume (struct usb_bus *bus);
#else
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f78bd12..5faf7ed 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1039,6 +1039,39 @@
EXPORT_SYMBOL(usb_set_device_state);
+#ifdef CONFIG_PM
+
+/**
+ * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
+ * @rhdev: struct usb_device for the root hub
+ *
+ * The USB host controller driver calls this function when its root hub
+ * is resumed and Vbus power has been interrupted or the controller
+ * has been reset. The routine marks all the children of the root hub
+ * as NOTATTACHED and marks logical connect-change events on their ports.
+ */
+void usb_root_hub_lost_power(struct usb_device *rhdev)
+{
+ struct usb_hub *hub;
+ int port1;
+ unsigned long flags;
+
+ dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
+ spin_lock_irqsave(&device_state_lock, flags);
+ hub = hdev_to_hub(rhdev);
+ for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
+ if (rhdev->children[port1 - 1]) {
+ recursively_mark_NOTATTACHED(
+ rhdev->children[port1 - 1]);
+ set_bit(port1, hub->change_bits);
+ }
+ }
+ spin_unlock_irqrestore(&device_state_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
+
+#endif
+
static void choose_address(struct usb_device *udev)
{
int devnum;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index ac088bc..08ca0f8 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -278,7 +278,6 @@
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
unsigned port;
- struct usb_device *root = hcd->self.root_hub;
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = -EINVAL;
@@ -312,13 +311,7 @@
restart:
ehci_dbg(ehci, "lost power, restarting\n");
- for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
- port--;
- if (!root->children [port])
- continue;
- usb_set_device_state(root->children[port],
- USB_STATE_NOTATTACHED);
- }
+ usb_root_hub_lost_power(hcd->self.root_hub);
/* Else reset, to cope with power loss or flush-to-storage
* style "resume" having let BIOS kick in during reboot.
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index e3af3ac..a4b1240 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -795,7 +795,6 @@
int temp;
int i;
struct urb_priv *priv;
- struct usb_device *root = ohci_to_hcd(ohci)->self.root_hub;
/* mark any devices gone, so they do nothing till khubd disconnects.
* recycle any "live" eds/tds (and urbs) right away.
@@ -804,11 +803,7 @@
*/
spin_lock_irq(&ohci->lock);
disable (ohci);
- for (i = 0; i < root->maxchild; i++) {
- if (root->children [i])
- usb_set_device_state (root->children[i],
- USB_STATE_NOTATTACHED);
- }
+ usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
if (!list_empty (&ohci->pending))
ohci_dbg(ohci, "abort schedule...\n");
list_for_each_entry (priv, &ohci->pending, pending) {
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 3a9cd46..517360b 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1803,6 +1803,7 @@
|| !device_can_wakeup(&hcd->self.root_hub->dev)) {
sl811->port1 = 0;
port_power(sl811, 1);
+ usb_root_hub_lost_power(hcd->self.root_hub);
return 0;
}
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 1c0394c..071fab6 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -748,8 +748,12 @@
check_and_reset_hc(uhci);
configure_hc(uhci);
- if (uhci->rh_state == UHCI_RH_RESET)
+ if (uhci->rh_state == UHCI_RH_RESET) {
+
+ /* The controller had to be reset */
+ usb_root_hub_lost_power(hcd->self.root_hub);
suspend_rh(uhci, UHCI_RH_SUSPENDED);
+ }
spin_unlock_irq(&uhci->lock);
