[CPUFREQ] Prepare powernow-k8 for future CPUs.
Forthcoming AMD products will use a different algorithm for transitioning
pstates than the current generation Opteron products do. The attached
patch allows the powernow-k8 driver to work with those products.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index 79a7c5c..bf8ad9e 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -1,5 +1,5 @@
/*
- * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
+ * (c) 2003-2006 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
@@ -21,8 +21,8 @@
u32 plllock; /* pll lock time, units 1 us */
u32 exttype; /* extended interface = 1 */
- /* keep track of the current fid / vid */
- u32 currvid, currfid;
+ /* keep track of the current fid / vid or did */
+ u32 currvid, currfid, currdid;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
@@ -34,6 +34,10 @@
* used to determine valid frequency/vid/fid states */
struct acpi_processor_performance acpi_data;
#endif
+ /* we need to keep track of associated cores, but let cpufreq
+ * handle hotplug events - so just point at cpufreq pol->cpus
+ * structure */
+ cpumask_t *available_cores;
};
@@ -43,6 +47,7 @@
#define CPUID_XFAM_K8 0
#define CPUID_XMOD 0x000f0000 /* extended model */
#define CPUID_XMOD_REV_G 0x00060000
+#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */
#define CPUID_USE_XFAM_XMOD 0x00000f00
#define CPUID_GET_MAX_CAPABILITIES 0x80000000
#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007
@@ -79,6 +84,32 @@
#define MSR_S_HI_CURRENT_VID 0x0000003f
#define MSR_C_HI_STP_GNT_BENIGN 0x00000001
+
+/* Hardware Pstate _PSS and MSR definitions */
+#define USE_HW_PSTATE 0x00000080
+#define HW_PSTATE_FID_MASK 0x0000003f
+#define HW_PSTATE_DID_MASK 0x000001c0
+#define HW_PSTATE_DID_SHIFT 6
+#define HW_PSTATE_MASK 0x00000007
+#define HW_PSTATE_VALID_MASK 0x80000000
+#define HW_FID_INDEX_SHIFT 8
+#define HW_FID_INDEX_MASK 0x0000ff00
+#define HW_DID_INDEX_SHIFT 16
+#define HW_DID_INDEX_MASK 0x00ff0000
+#define HW_WATTS_MASK 0xff
+#define HW_PWR_DVR_MASK 0x300
+#define HW_PWR_DVR_SHIFT 8
+#define HW_PWR_MAX_MULT 3
+#define MAX_HW_PSTATE 8 /* hw pstate supports up to 8 */
+#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */
+#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */
+#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */
+
+/* define the two driver architectures */
+#define CPU_OPTERON 0
+#define CPU_HW_PSTATE 1
+
+
/*
* There are restrictions frequencies have to follow:
* - only 1 entry in the low fid table ( <=1.4GHz )
@@ -182,6 +213,9 @@
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
+
#ifdef CONFIG_SMP
static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
{
