/*
 *	Generic parts
 *	Linux ethernet bridge
 *
 *	Authors:
 *	Lennert Buytenhek		<buytenh@gnu.org>
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License
 *	as published by the Free Software Foundation; either version
 *	2 of the License, or (at your option) any later version.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/llc.h>
#include <net/llc.h>
#include <net/stp.h>

#include "br_private.h"

/*
 * Handle changes in state of network devices enslaved to a bridge.
 *
 * Note: don't care about up/down if bridge itself is down, because
 *     port state is checked when bridge is brought up.
 */
static int br_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
{
	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
	struct net_bridge_port *p;
	struct net_bridge *br;
	bool changed_addr;
	int err;

	/* register of bridge completed, add sysfs entries */
	if ((dev->priv_flags & IFF_EBRIDGE) && event == NETDEV_REGISTER) {
		br_sysfs_addbr(dev);
		return NOTIFY_DONE;
	}

	/* not a port of a bridge */
	p = br_port_get_rtnl(dev);
	if (!p)
		return NOTIFY_DONE;

	br = p->br;

	switch (event) {
	case NETDEV_CHANGEMTU:
		dev_set_mtu(br->dev, br_min_mtu(br));
		break;

	case NETDEV_CHANGEADDR:
		spin_lock_bh(&br->lock);
		br_fdb_changeaddr(p, dev->dev_addr);
		changed_addr = br_stp_recalculate_bridge_id(br);
		spin_unlock_bh(&br->lock);

		if (changed_addr)
			call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);

		break;

	case NETDEV_CHANGE:
		br_port_carrier_check(p);
		break;

	case NETDEV_FEAT_CHANGE:
		netdev_update_features(br->dev);
		break;

	case NETDEV_DOWN:
		spin_lock_bh(&br->lock);
		if (br->dev->flags & IFF_UP)
			br_stp_disable_port(p);
		spin_unlock_bh(&br->lock);
		break;

	case NETDEV_UP:
		if (netif_running(br->dev) && netif_oper_up(dev)) {
			spin_lock_bh(&br->lock);
			br_stp_enable_port(p);
			spin_unlock_bh(&br->lock);
		}
		break;

	case NETDEV_UNREGISTER:
		br_del_if(br, dev);
		break;

	case NETDEV_CHANGENAME:
		err = br_sysfs_renameif(p);
		if (err)
			return notifier_from_errno(err);
		break;

	case NETDEV_PRE_TYPE_CHANGE:
		/* Forbid underlaying device to change its type. */
		return NOTIFY_BAD;

	case NETDEV_RESEND_IGMP:
		/* Propagate to master device */
		call_netdevice_notifiers(event, br->dev);
		break;
	}

	/* Events that may cause spanning tree to refresh */
	if (event == NETDEV_CHANGEADDR || event == NETDEV_UP ||
	    event == NETDEV_CHANGE || event == NETDEV_DOWN)
		br_ifinfo_notify(RTM_NEWLINK, p);

	return NOTIFY_DONE;
}

static struct notifier_block br_device_notifier = {
	.notifier_call = br_device_event
};

static void __net_exit br_net_exit(struct net *net)
{
	struct net_device *dev;
	LIST_HEAD(list);

	rtnl_lock();
	for_each_netdev(net, dev)
		if (dev->priv_flags & IFF_EBRIDGE)
			br_dev_delete(dev, &list);

	unregister_netdevice_many(&list);
	rtnl_unlock();

}

static struct pernet_operations br_net_ops = {
	.exit	= br_net_exit,
};

static const struct stp_proto br_stp_proto = {
	.rcv	= br_stp_rcv,
};

static int __init br_init(void)
{
	int err;

	err = stp_proto_register(&br_stp_proto);
	if (err < 0) {
		pr_err("bridge: can't register sap for STP\n");
		return err;
	}

	err = br_fdb_init();
	if (err)
		goto err_out;

	err = register_pernet_subsys(&br_net_ops);
	if (err)
		goto err_out1;

	err = br_netfilter_init();
	if (err)
		goto err_out2;

	err = register_netdevice_notifier(&br_device_notifier);
	if (err)
		goto err_out3;

	err = br_netlink_init();
	if (err)
		goto err_out4;

	brioctl_set(br_ioctl_deviceless_stub);

#if IS_ENABLED(CONFIG_ATM_LANE)
	br_fdb_test_addr_hook = br_fdb_test_addr;
#endif

	return 0;
err_out4:
	unregister_netdevice_notifier(&br_device_notifier);
err_out3:
	br_netfilter_fini();
err_out2:
	unregister_pernet_subsys(&br_net_ops);
err_out1:
	br_fdb_fini();
err_out:
	stp_proto_unregister(&br_stp_proto);
	return err;
}

static void __exit br_deinit(void)
{
	stp_proto_unregister(&br_stp_proto);

	br_netlink_fini();
	unregister_netdevice_notifier(&br_device_notifier);
	brioctl_set(NULL);

	unregister_pernet_subsys(&br_net_ops);

	rcu_barrier(); /* Wait for completion of call_rcu()'s */

	br_netfilter_fini();
#if IS_ENABLED(CONFIG_ATM_LANE)
	br_fdb_test_addr_hook = NULL;
#endif

	br_fdb_fini();
}

module_init(br_init)
module_exit(br_deinit)
MODULE_LICENSE("GPL");
MODULE_VERSION(BR_VERSION);
MODULE_ALIAS_RTNL_LINK("bridge");