| /* |
| * Copyright (c) 2007 Mellanox Technologies. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| */ |
| |
| #include <linux/cpumask.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mlx4/driver.h> |
| #include <linux/mlx4/device.h> |
| #include <linux/mlx4/cmd.h> |
| |
| #include "mlx4_en.h" |
| |
| MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin"); |
| MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")"); |
| |
| static const char mlx4_en_version[] = |
| DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v" |
| DRV_VERSION " (" DRV_RELDATE ")\n"; |
| |
| #define MLX4_EN_PARM_INT(X, def_val, desc) \ |
| static unsigned int X = def_val;\ |
| module_param(X , uint, 0444); \ |
| MODULE_PARM_DESC(X, desc); |
| |
| |
| /* |
| * Device scope module parameters |
| */ |
| |
| /* Enable RSS UDP traffic */ |
| MLX4_EN_PARM_INT(udp_rss, 1, |
| "Enable RSS for incoming UDP traffic or disabled (0)"); |
| |
| /* Priority pausing */ |
| MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." |
| " Per priority bit mask"); |
| MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]." |
| " Per priority bit mask"); |
| |
| MLX4_EN_PARM_INT(inline_thold, MAX_INLINE, |
| "Threshold for using inline data (range: 17-104, default: 104)"); |
| |
| #define MAX_PFC_TX 0xff |
| #define MAX_PFC_RX 0xff |
| |
| int en_print(const char *level, const struct mlx4_en_priv *priv, |
| const char *format, ...) |
| { |
| va_list args; |
| struct va_format vaf; |
| int i; |
| |
| va_start(args, format); |
| |
| vaf.fmt = format; |
| vaf.va = &args; |
| if (priv->registered) |
| i = printk("%s%s: %s: %pV", |
| level, DRV_NAME, priv->dev->name, &vaf); |
| else |
| i = printk("%s%s: %s: Port %d: %pV", |
| level, DRV_NAME, dev_name(&priv->mdev->pdev->dev), |
| priv->port, &vaf); |
| va_end(args); |
| |
| return i; |
| } |
| |
| void mlx4_en_update_loopback_state(struct net_device *dev, |
| netdev_features_t features) |
| { |
| struct mlx4_en_priv *priv = netdev_priv(dev); |
| |
| priv->flags &= ~(MLX4_EN_FLAG_RX_FILTER_NEEDED| |
| MLX4_EN_FLAG_ENABLE_HW_LOOPBACK); |
| |
| /* Drop the packet if SRIOV is not enabled |
| * and not performing the selftest or flb disabled |
| */ |
| if (mlx4_is_mfunc(priv->mdev->dev) && |
| !(features & NETIF_F_LOOPBACK) && !priv->validate_loopback) |
| priv->flags |= MLX4_EN_FLAG_RX_FILTER_NEEDED; |
| |
| /* Set dmac in Tx WQE if we are in SRIOV mode or if loopback selftest |
| * is requested |
| */ |
| if (mlx4_is_mfunc(priv->mdev->dev) || priv->validate_loopback) |
| priv->flags |= MLX4_EN_FLAG_ENABLE_HW_LOOPBACK; |
| } |
| |
| static int mlx4_en_get_profile(struct mlx4_en_dev *mdev) |
| { |
| struct mlx4_en_profile *params = &mdev->profile; |
| int i; |
| |
| params->udp_rss = udp_rss; |
| params->num_tx_rings_p_up = min_t(int, num_online_cpus(), |
| MLX4_EN_MAX_TX_RING_P_UP); |
| if (params->udp_rss && !(mdev->dev->caps.flags |
| & MLX4_DEV_CAP_FLAG_UDP_RSS)) { |
| mlx4_warn(mdev, "UDP RSS is not supported on this device\n"); |
| params->udp_rss = 0; |
| } |
| for (i = 1; i <= MLX4_MAX_PORTS; i++) { |
| params->prof[i].rx_pause = 1; |
| params->prof[i].rx_ppp = pfcrx; |
| params->prof[i].tx_pause = 1; |
| params->prof[i].tx_ppp = pfctx; |
| params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE; |
| params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE; |
| params->prof[i].tx_ring_num = params->num_tx_rings_p_up * |
| MLX4_EN_NUM_UP; |
| params->prof[i].rss_rings = 0; |
| params->prof[i].inline_thold = inline_thold; |
| } |
| |
| return 0; |
| } |
| |
| static void *mlx4_en_get_netdev(struct mlx4_dev *dev, void *ctx, u8 port) |
| { |
| struct mlx4_en_dev *endev = ctx; |
| |
| return endev->pndev[port]; |
| } |
| |
| static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr, |
| enum mlx4_dev_event event, unsigned long port) |
| { |
| struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr; |
| struct mlx4_en_priv *priv; |
| |
| switch (event) { |
| case MLX4_DEV_EVENT_PORT_UP: |
| case MLX4_DEV_EVENT_PORT_DOWN: |
| if (!mdev->pndev[port]) |
| return; |
| priv = netdev_priv(mdev->pndev[port]); |
| /* To prevent races, we poll the link state in a separate |
| task rather than changing it here */ |
| priv->link_state = event; |
| queue_work(mdev->workqueue, &priv->linkstate_task); |
| break; |
| |
| case MLX4_DEV_EVENT_CATASTROPHIC_ERROR: |
| mlx4_err(mdev, "Internal error detected, restarting device\n"); |
| break; |
| |
| case MLX4_DEV_EVENT_SLAVE_INIT: |
| case MLX4_DEV_EVENT_SLAVE_SHUTDOWN: |
| break; |
| default: |
| if (port < 1 || port > dev->caps.num_ports || |
| !mdev->pndev[port]) |
| return; |
| mlx4_warn(mdev, "Unhandled event %d for port %d\n", event, |
| (int) port); |
| } |
| } |
| |
| static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr) |
| { |
| struct mlx4_en_dev *mdev = endev_ptr; |
| int i; |
| |
| mutex_lock(&mdev->state_lock); |
| mdev->device_up = false; |
| mutex_unlock(&mdev->state_lock); |
| |
| mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) |
| if (mdev->pndev[i]) |
| mlx4_en_destroy_netdev(mdev->pndev[i]); |
| |
| if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) |
| mlx4_en_remove_timestamp(mdev); |
| |
| flush_workqueue(mdev->workqueue); |
| destroy_workqueue(mdev->workqueue); |
| (void) mlx4_mr_free(dev, &mdev->mr); |
| iounmap(mdev->uar_map); |
| mlx4_uar_free(dev, &mdev->priv_uar); |
| mlx4_pd_free(dev, mdev->priv_pdn); |
| kfree(mdev); |
| } |
| |
| static void *mlx4_en_add(struct mlx4_dev *dev) |
| { |
| struct mlx4_en_dev *mdev; |
| int i; |
| int err; |
| |
| printk_once(KERN_INFO "%s", mlx4_en_version); |
| |
| mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); |
| if (!mdev) { |
| err = -ENOMEM; |
| goto err_free_res; |
| } |
| |
| if (mlx4_pd_alloc(dev, &mdev->priv_pdn)) |
| goto err_free_dev; |
| |
| if (mlx4_uar_alloc(dev, &mdev->priv_uar)) |
| goto err_pd; |
| |
| mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT, |
| PAGE_SIZE); |
| if (!mdev->uar_map) |
| goto err_uar; |
| spin_lock_init(&mdev->uar_lock); |
| |
| mdev->dev = dev; |
| mdev->dma_device = &(dev->pdev->dev); |
| mdev->pdev = dev->pdev; |
| mdev->device_up = false; |
| |
| mdev->LSO_support = !!(dev->caps.flags & (1 << 15)); |
| if (!mdev->LSO_support) |
| mlx4_warn(mdev, "LSO not supported, please upgrade to later FW version to enable LSO\n"); |
| |
| if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull, |
| MLX4_PERM_LOCAL_WRITE | MLX4_PERM_LOCAL_READ, |
| 0, 0, &mdev->mr)) { |
| mlx4_err(mdev, "Failed allocating memory region\n"); |
| goto err_map; |
| } |
| if (mlx4_mr_enable(mdev->dev, &mdev->mr)) { |
| mlx4_err(mdev, "Failed enabling memory region\n"); |
| goto err_mr; |
| } |
| |
| /* Build device profile according to supplied module parameters */ |
| err = mlx4_en_get_profile(mdev); |
| if (err) { |
| mlx4_err(mdev, "Bad module parameters, aborting\n"); |
| goto err_mr; |
| } |
| |
| /* Configure which ports to start according to module parameters */ |
| mdev->port_cnt = 0; |
| mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) |
| mdev->port_cnt++; |
| |
| /* Initialize time stamp mechanism */ |
| if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) |
| mlx4_en_init_timestamp(mdev); |
| |
| /* Set default number of RX rings*/ |
| mlx4_en_set_num_rx_rings(mdev); |
| |
| /* Create our own workqueue for reset/multicast tasks |
| * Note: we cannot use the shared workqueue because of deadlocks caused |
| * by the rtnl lock */ |
| mdev->workqueue = create_singlethread_workqueue("mlx4_en"); |
| if (!mdev->workqueue) { |
| err = -ENOMEM; |
| goto err_mr; |
| } |
| |
| /* At this stage all non-port specific tasks are complete: |
| * mark the card state as up */ |
| mutex_init(&mdev->state_lock); |
| mdev->device_up = true; |
| |
| /* Setup ports */ |
| |
| /* Create a netdev for each port */ |
| mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { |
| mlx4_info(mdev, "Activating port:%d\n", i); |
| if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) |
| mdev->pndev[i] = NULL; |
| } |
| |
| return mdev; |
| |
| err_mr: |
| (void) mlx4_mr_free(dev, &mdev->mr); |
| err_map: |
| if (mdev->uar_map) |
| iounmap(mdev->uar_map); |
| err_uar: |
| mlx4_uar_free(dev, &mdev->priv_uar); |
| err_pd: |
| mlx4_pd_free(dev, mdev->priv_pdn); |
| err_free_dev: |
| kfree(mdev); |
| err_free_res: |
| return NULL; |
| } |
| |
| static struct mlx4_interface mlx4_en_interface = { |
| .add = mlx4_en_add, |
| .remove = mlx4_en_remove, |
| .event = mlx4_en_event, |
| .get_dev = mlx4_en_get_netdev, |
| .protocol = MLX4_PROT_ETH, |
| }; |
| |
| static void mlx4_en_verify_params(void) |
| { |
| if (pfctx > MAX_PFC_TX) { |
| pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n", |
| pfctx, MAX_PFC_TX); |
| pfctx = 0; |
| } |
| |
| if (pfcrx > MAX_PFC_RX) { |
| pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n", |
| pfcrx, MAX_PFC_RX); |
| pfcrx = 0; |
| } |
| |
| if (inline_thold < MIN_PKT_LEN || inline_thold > MAX_INLINE) { |
| pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n", |
| inline_thold, MIN_PKT_LEN, MAX_INLINE, MAX_INLINE); |
| inline_thold = MAX_INLINE; |
| } |
| } |
| |
| static int __init mlx4_en_init(void) |
| { |
| mlx4_en_verify_params(); |
| |
| return mlx4_register_interface(&mlx4_en_interface); |
| } |
| |
| static void __exit mlx4_en_cleanup(void) |
| { |
| mlx4_unregister_interface(&mlx4_en_interface); |
| } |
| |
| module_init(mlx4_en_init); |
| module_exit(mlx4_en_cleanup); |
| |