[PATCH] sundance: solve host error problem in low performance embedded system when continune down and up
Solve host error problem in low performance embedded system when continune
down and up. It will cause IP100A DMA TargetAbort. So we need more safe
process to up and down IP100A with wait hardware completely stop and software
cur_tx/ dirty_tx/cur_task/last_tx be clear.
Signed-off-by: Jesse Huang <jesse@icplus.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index fba64d3..02679e6 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -1642,6 +1642,14 @@
struct sk_buff *skb;
int i;
+ /* Wait and kill tasklet */
+ tasklet_kill(&np->rx_tasklet);
+ tasklet_kill(&np->tx_tasklet);
+ np->cur_tx = 0;
+ np->dirty_tx = 0;
+ np->cur_task = 0;
+ np->last_tx = 0;
+
netif_stop_queue(dev);
if (netif_msg_ifdown(np)) {
@@ -1662,9 +1670,20 @@
/* Stop the chip's Tx and Rx processes. */
iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
- /* Wait and kill tasklet */
- tasklet_kill(&np->rx_tasklet);
- tasklet_kill(&np->tx_tasklet);
+ for (i = 2000; i > 0; i--) {
+ if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0)
+ break;
+ mdelay(1);
+ }
+
+ iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset,
+ ioaddr +ASICCtrl + 2);
+
+ for (i = 2000; i > 0; i--) {
+ if ((ioread16(ioaddr + ASICCtrl +2) & ResetBusy) == 0)
+ break;
+ mdelay(1);
+ }
#ifdef __i386__
if (netif_msg_hw(np)) {
@@ -1702,6 +1721,7 @@
}
}
for (i = 0; i < TX_RING_SIZE; i++) {
+ np->tx_ring[i].next_desc = 0;
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pci_dev,
