m68k: atari - Rename "mfp" to "st_mfp"
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/:
| net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile'
| net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token
| net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type
| distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed
This is caused by
| # define mfp ((*(volatile struct MFP*)MFP_BAS))
in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in
net/mac80211/ieee80211_i.h.
Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 69e1df7..4234c11 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1730,7 +1730,7 @@
timeout = jiffies + 2*HZ+HZ/2;
while (time_before(jiffies, timeout))
- if (!(mfp.par_dt_reg & 0x20))
+ if (!(st_mfp.par_dt_reg & 0x20))
break;
status = FDC_READ( FDCREG_STATUS );
@@ -1747,7 +1747,7 @@
/* dummy seek command to make WP bit accessible */
FDC_WRITE( FDCREG_DATA, 0 );
FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
- while( mfp.par_dt_reg & 0x20 )
+ while( st_mfp.par_dt_reg & 0x20 )
;
status = FDC_READ( FDCREG_STATUS );
}
diff --git a/drivers/char/scc.h b/drivers/char/scc.h
index 93998f5..341b114 100644
--- a/drivers/char/scc.h
+++ b/drivers/char/scc.h
@@ -387,7 +387,7 @@
/* The SCC needs 3.5 PCLK cycles recovery time between to register
* accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 *
* 125 ns = 437.5 ns. This is too short for udelay().
- * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be
+ * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be
* quite right
*/
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index ad4cdd2..0b28fcc 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -84,7 +84,7 @@
static unsigned char
parport_atari_read_status(struct parport *p)
{
- return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+ return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
}
@@ -193,9 +193,9 @@
sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
local_irq_restore(flags);
/* MFP port I0 as input. */
- mfp.data_dir &= ~1;
+ st_mfp.data_dir &= ~1;
/* MFP port I0 interrupt on high->low edge. */
- mfp.active_edge &= ~1;
+ st_mfp.active_edge &= ~1;
p = parport_register_port((unsigned long)&sound_ym.wd_data,
IRQ_MFP_BUSY, PARPORT_DMA_NONE,
&parport_atari_ops);
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 8058572..018850c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -841,7 +841,7 @@
tt_dmasnd.ctrl = DMASND_CTRL_OFF;
udelay(20); /* wait a while for things to settle down */
}
- mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+ mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
tt_get_par(&par);
tt_encode_var(&atafb_predefined[0], &par);
@@ -2035,7 +2035,7 @@
tt_dmasnd.ctrl = DMASND_CTRL_OFF;
udelay(20); /* wait a while for things to settle down */
}
- mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+ mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
stste_get_par(&par);
stste_encode_var(&atafb_predefined[0], &par);
@@ -2086,20 +2086,20 @@
return;
local_irq_save(flags);
- mfp.tim_ct_b = 0x10;
- mfp.active_edge |= 8;
- mfp.tim_ct_b = 0;
- mfp.tim_dt_b = 0xf0;
- mfp.tim_ct_b = 8;
- while (mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */
+ st_mfp.tim_ct_b = 0x10;
+ st_mfp.active_edge |= 8;
+ st_mfp.tim_ct_b = 0;
+ st_mfp.tim_dt_b = 0xf0;
+ st_mfp.tim_ct_b = 8;
+ while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */
;
- new = mfp.tim_dt_b;
+ new = st_mfp.tim_dt_b;
do {
udelay(LINE_DELAY);
old = new;
- new = mfp.tim_dt_b;
+ new = st_mfp.tim_dt_b;
} while (old != new);
- mfp.tim_ct_b = 0x10;
+ st_mfp.tim_ct_b = 0x10;
udelay(SYNC_DELAY);
if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
