powerpc/booke: Add support for new e500mc core
The new e500mc core from Freescale is based on the e500v2 but with the
following changes:
* Supports only the Enhanced Debug Architecture (DSRR0/1, etc)
* Floating Point
* No SPE
* Supports lwsync
* Doorbell Exceptions
* Hypervisor
* Cache line size is now 64-bytes (e500v1/v2 have a 32-byte cache line)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e44d553..aa421f5 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1522,6 +1522,21 @@
.machine_check = machine_check_e500,
.platform = "ppc8548",
},
+ { /* e500mc */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x80230000,
+ .cpu_name = "e500mc",
+ /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
+ .cpu_features = CPU_FTRS_E500MC,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 64,
+ .dcache_bsize = 64,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e500", /* xxx - galak, e500mc? */
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
+ .machine_check = machine_check_e500,
+ .platform = "ppce500mc",
+ },
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 9501c58..505494f 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -68,9 +68,13 @@
#define MCHECK_STACK_BASE mcheckirq_ctx
#define CRIT_STACK_BASE critirq_ctx
-/* only on e200 for now */
+/* only on e500mc/e200 */
#define DEBUG_STACK_BASE dbgirq_ctx
+#ifdef CONFIG_PPC_E500MC
+#define DEBUG_SPRG SPRN_SPRG9
+#else
#define DEBUG_SPRG SPRN_SPRG6W
+#endif
#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 503f860..7c2b653 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -304,7 +304,7 @@
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
SET_IVOR(15, DebugDebug);
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
SET_IVOR(15, DebugCrit);
#endif
SET_IVOR(32, SPEUnavailable);
@@ -313,6 +313,9 @@
#ifndef CONFIG_E200
SET_IVOR(35, PerformanceMonitor);
#endif
+#ifdef CONFIG_PPC_E500MC
+ SET_IVOR(36, Doorbell);
+#endif
/* Establish the interrupt vector base */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
@@ -750,10 +753,13 @@
/* Performance Monitor */
EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
+#ifdef CONFIG_PPC_E500MC
+ EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+#endif
/* Debug Interrupt */
DEBUG_DEBUG_EXCEPTION
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
DEBUG_CRIT_EXCEPTION
#endif
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f7efaa9..1a1ccfb 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -95,6 +95,11 @@
select FSL_EMB_PERFMON
bool
+config PPC_E500MC
+ bool "e500mc Support"
+ select PPC_FPU
+ depends on E500
+
config PPC_FPU
bool
default y if PPC64
@@ -157,7 +162,7 @@
config SPE
bool "SPE Support"
- depends on E200 || E500
+ depends on E200 || (E500 && !PPC_E500MC)
default y
---help---
This option enables kernel support for the Signal Processing
