| /* | |
| * net/dsa/tag_dsa.c - (Non-ethertype) DSA tagging | |
| * Copyright (c) 2008-2009 Marvell Semiconductor | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/etherdevice.h> | |
| #include <linux/list.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/slab.h> | |
| #include "dsa_priv.h" | |
| #define DSA_HLEN 4 | |
| netdev_tx_t dsa_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct dsa_slave_priv *p = netdev_priv(dev); | |
| u8 *dsa_header; | |
| dev->stats.tx_packets++; | |
| dev->stats.tx_bytes += skb->len; | |
| /* | |
| * Convert the outermost 802.1q tag to a DSA tag for tagged | |
| * packets, or insert a DSA tag between the addresses and | |
| * the ethertype field for untagged packets. | |
| */ | |
| if (skb->protocol == htons(ETH_P_8021Q)) { | |
| if (skb_cow_head(skb, 0) < 0) | |
| goto out_free; | |
| /* | |
| * Construct tagged FROM_CPU DSA tag from 802.1q tag. | |
| */ | |
| dsa_header = skb->data + 2 * ETH_ALEN; | |
| dsa_header[0] = 0x60 | p->parent->index; | |
| dsa_header[1] = p->port << 3; | |
| /* | |
| * Move CFI field from byte 2 to byte 1. | |
| */ | |
| if (dsa_header[2] & 0x10) { | |
| dsa_header[1] |= 0x01; | |
| dsa_header[2] &= ~0x10; | |
| } | |
| } else { | |
| if (skb_cow_head(skb, DSA_HLEN) < 0) | |
| goto out_free; | |
| skb_push(skb, DSA_HLEN); | |
| memmove(skb->data, skb->data + DSA_HLEN, 2 * ETH_ALEN); | |
| /* | |
| * Construct untagged FROM_CPU DSA tag. | |
| */ | |
| dsa_header = skb->data + 2 * ETH_ALEN; | |
| dsa_header[0] = 0x40 | p->parent->index; | |
| dsa_header[1] = p->port << 3; | |
| dsa_header[2] = 0x00; | |
| dsa_header[3] = 0x00; | |
| } | |
| skb->protocol = htons(ETH_P_DSA); | |
| skb->dev = p->parent->dst->master_netdev; | |
| dev_queue_xmit(skb); | |
| return NETDEV_TX_OK; | |
| out_free: | |
| kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| static int dsa_rcv(struct sk_buff *skb, struct net_device *dev, | |
| struct packet_type *pt, struct net_device *orig_dev) | |
| { | |
| struct dsa_switch_tree *dst = dev->dsa_ptr; | |
| struct dsa_switch *ds; | |
| u8 *dsa_header; | |
| int source_device; | |
| int source_port; | |
| if (unlikely(dst == NULL)) | |
| goto out_drop; | |
| skb = skb_unshare(skb, GFP_ATOMIC); | |
| if (skb == NULL) | |
| goto out; | |
| if (unlikely(!pskb_may_pull(skb, DSA_HLEN))) | |
| goto out_drop; | |
| /* | |
| * The ethertype field is part of the DSA header. | |
| */ | |
| dsa_header = skb->data - 2; | |
| /* | |
| * Check that frame type is either TO_CPU or FORWARD. | |
| */ | |
| if ((dsa_header[0] & 0xc0) != 0x00 && (dsa_header[0] & 0xc0) != 0xc0) | |
| goto out_drop; | |
| /* | |
| * Determine source device and port. | |
| */ | |
| source_device = dsa_header[0] & 0x1f; | |
| source_port = (dsa_header[1] >> 3) & 0x1f; | |
| /* | |
| * Check that the source device exists and that the source | |
| * port is a registered DSA port. | |
| */ | |
| if (source_device >= dst->pd->nr_chips) | |
| goto out_drop; | |
| ds = dst->ds[source_device]; | |
| if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL) | |
| goto out_drop; | |
| /* | |
| * Convert the DSA header to an 802.1q header if the 'tagged' | |
| * bit in the DSA header is set. If the 'tagged' bit is clear, | |
| * delete the DSA header entirely. | |
| */ | |
| if (dsa_header[0] & 0x20) { | |
| u8 new_header[4]; | |
| /* | |
| * Insert 802.1q ethertype and copy the VLAN-related | |
| * fields, but clear the bit that will hold CFI (since | |
| * DSA uses that bit location for another purpose). | |
| */ | |
| new_header[0] = (ETH_P_8021Q >> 8) & 0xff; | |
| new_header[1] = ETH_P_8021Q & 0xff; | |
| new_header[2] = dsa_header[2] & ~0x10; | |
| new_header[3] = dsa_header[3]; | |
| /* | |
| * Move CFI bit from its place in the DSA header to | |
| * its 802.1q-designated place. | |
| */ | |
| if (dsa_header[1] & 0x01) | |
| new_header[2] |= 0x10; | |
| /* | |
| * Update packet checksum if skb is CHECKSUM_COMPLETE. | |
| */ | |
| if (skb->ip_summed == CHECKSUM_COMPLETE) { | |
| __wsum c = skb->csum; | |
| c = csum_add(c, csum_partial(new_header + 2, 2, 0)); | |
| c = csum_sub(c, csum_partial(dsa_header + 2, 2, 0)); | |
| skb->csum = c; | |
| } | |
| memcpy(dsa_header, new_header, DSA_HLEN); | |
| } else { | |
| /* | |
| * Remove DSA tag and update checksum. | |
| */ | |
| skb_pull_rcsum(skb, DSA_HLEN); | |
| memmove(skb->data - ETH_HLEN, | |
| skb->data - ETH_HLEN - DSA_HLEN, | |
| 2 * ETH_ALEN); | |
| } | |
| skb->dev = ds->ports[source_port]; | |
| skb_push(skb, ETH_HLEN); | |
| skb->pkt_type = PACKET_HOST; | |
| skb->protocol = eth_type_trans(skb, skb->dev); | |
| skb->dev->stats.rx_packets++; | |
| skb->dev->stats.rx_bytes += skb->len; | |
| netif_receive_skb(skb); | |
| return 0; | |
| out_drop: | |
| kfree_skb(skb); | |
| out: | |
| return 0; | |
| } | |
| struct packet_type dsa_packet_type __read_mostly = { | |
| .type = cpu_to_be16(ETH_P_DSA), | |
| .func = dsa_rcv, | |
| }; |