| /* |
| * Atmel SAM Boot Assistant (SAM-BA) driver |
| * |
| * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/tty.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| |
| |
| #define DRIVER_VERSION "v1.0" |
| #define DRIVER_AUTHOR "Johan Hovold <jhovold@gmail.com>" |
| #define DRIVER_DESC "Atmel SAM Boot Assistant (SAM-BA) driver" |
| |
| #define SAMBA_VENDOR_ID 0x3eb |
| #define SAMBA_PRODUCT_ID 0x6124 |
| |
| |
| static int debug; |
| |
| static const struct usb_device_id id_table[] = { |
| /* |
| * NOTE: Only match the CDC Data interface. |
| */ |
| { USB_DEVICE_AND_INTERFACE_INFO(SAMBA_VENDOR_ID, SAMBA_PRODUCT_ID, |
| USB_CLASS_CDC_DATA, 0, 0) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| static struct usb_driver samba_driver = { |
| .name = "sam-ba", |
| .probe = usb_serial_probe, |
| .disconnect = usb_serial_disconnect, |
| .id_table = id_table, |
| .no_dynamic_id = 1, |
| }; |
| |
| |
| /* |
| * NOTE: The SAM-BA firmware cannot handle merged write requests so we cannot |
| * use the generic write implementation (which uses the port write fifo). |
| */ |
| static int samba_write(struct tty_struct *tty, struct usb_serial_port *port, |
| const unsigned char *buf, int count) |
| { |
| struct urb *urb; |
| unsigned long flags; |
| int result; |
| int i; |
| |
| if (!count) |
| return 0; |
| |
| count = min_t(int, count, port->bulk_out_size); |
| |
| spin_lock_irqsave(&port->lock, flags); |
| if (!port->write_urbs_free) { |
| spin_unlock_irqrestore(&port->lock, flags); |
| return 0; |
| } |
| i = find_first_bit(&port->write_urbs_free, |
| ARRAY_SIZE(port->write_urbs)); |
| __clear_bit(i, &port->write_urbs_free); |
| port->tx_bytes += count; |
| spin_unlock_irqrestore(&port->lock, flags); |
| |
| urb = port->write_urbs[i]; |
| memcpy(urb->transfer_buffer, buf, count); |
| urb->transfer_buffer_length = count; |
| usb_serial_debug_data(debug, &port->dev, __func__, count, |
| urb->transfer_buffer); |
| result = usb_submit_urb(urb, GFP_ATOMIC); |
| if (result) { |
| dev_err(&port->dev, "%s - error submitting urb: %d\n", |
| __func__, result); |
| spin_lock_irqsave(&port->lock, flags); |
| __set_bit(i, &port->write_urbs_free); |
| port->tx_bytes -= count; |
| spin_unlock_irqrestore(&port->lock, flags); |
| |
| return result; |
| } |
| |
| return count; |
| } |
| |
| static int samba_write_room(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| unsigned long flags; |
| unsigned long free; |
| int count; |
| int room; |
| |
| spin_lock_irqsave(&port->lock, flags); |
| free = port->write_urbs_free; |
| spin_unlock_irqrestore(&port->lock, flags); |
| |
| count = hweight_long(free); |
| room = count * port->bulk_out_size; |
| |
| dbg("%s - returns %d", __func__, room); |
| |
| return room; |
| } |
| |
| static int samba_chars_in_buffer(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| unsigned long flags; |
| int chars; |
| |
| spin_lock_irqsave(&port->lock, flags); |
| chars = port->tx_bytes; |
| spin_unlock_irqrestore(&port->lock, flags); |
| |
| dbg("%s - returns %d", __func__, chars); |
| |
| return chars; |
| } |
| |
| static void samba_write_bulk_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| unsigned long flags; |
| int i; |
| |
| dbg("%s - port %d", __func__, port->number); |
| |
| for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { |
| if (port->write_urbs[i] == urb) |
| break; |
| } |
| spin_lock_irqsave(&port->lock, flags); |
| __set_bit(i, &port->write_urbs_free); |
| port->tx_bytes -= urb->transfer_buffer_length; |
| spin_unlock_irqrestore(&port->lock, flags); |
| |
| if (urb->status) |
| dbg("%s - non-zero urb status: %d", __func__, urb->status); |
| |
| usb_serial_port_softint(port); |
| } |
| |
| static struct usb_serial_driver samba_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "sam-ba", |
| }, |
| .usb_driver = &samba_driver, |
| .id_table = id_table, |
| .num_ports = 1, |
| .bulk_in_size = 512, |
| .bulk_out_size = 2048, |
| .write = samba_write, |
| .write_room = samba_write_room, |
| .chars_in_buffer = samba_chars_in_buffer, |
| .write_bulk_callback = samba_write_bulk_callback, |
| .throttle = usb_serial_generic_throttle, |
| .unthrottle = usb_serial_generic_unthrottle, |
| }; |
| |
| static int __init samba_init(void) |
| { |
| int retval; |
| |
| retval = usb_serial_register(&samba_device); |
| if (retval) |
| return retval; |
| |
| retval = usb_register(&samba_driver); |
| if (retval) { |
| usb_serial_deregister(&samba_device); |
| return retval; |
| } |
| |
| printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ": " |
| DRIVER_DESC "\n"); |
| return 0; |
| } |
| |
| static void __exit samba_exit(void) |
| { |
| usb_deregister(&samba_driver); |
| usb_serial_deregister(&samba_device); |
| } |
| |
| module_init(samba_init); |
| module_exit(samba_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(debug, bool, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Enable verbose debugging messages"); |