[PATCH] CRIS update: new subarchitecture v32
New CRIS sub architecture named v32.
From: Dave Jones <davej@redhat.com>
Fix swapped kmalloc args
Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile
new file mode 100644
index 0000000..5d5b613
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/Makefile
@@ -0,0 +1,21 @@
+# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head.o
+
+
+obj-y := entry.o traps.o irq.o debugport.o dma.o pinmux.o \
+ process.o ptrace.o setup.o signal.o traps.o time.o \
+ arbiter.o io.o
+
+obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
+
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
+obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
+obj-$(CONFIG_MODULES) += crisksyms.o
+
+clean:
+
diff --git a/arch/cris/arch-v32/kernel/arbiter.c b/arch/cris/arch-v32/kernel/arbiter.c
new file mode 100644
index 0000000..3870d2fd
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/arbiter.c
@@ -0,0 +1,297 @@
+/*
+ * Memory arbiter functions. Allocates bandwith through the
+ * arbiter and sets up arbiter breakpoints.
+ *
+ * The algorithm first assigns slots to the clients that has specified
+ * bandwith (e.g. ethernet) and then the remaining slots are divided
+ * on all the active clients.
+ *
+ * Copyright (c) 2004, 2005 Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/marb_defs.h>
+#include <asm/arch/arbiter.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct crisv32_watch_entry
+{
+ unsigned long instance;
+ watch_callback* cb;
+ unsigned long start;
+ unsigned long end;
+ int used;
+};
+
+#define NUMBER_OF_BP 4
+#define NBR_OF_CLIENTS 14
+#define NBR_OF_SLOTS 64
+#define SDRAM_BANDWIDTH 100000000 /* Some kind of expected value */
+#define INTMEM_BANDWIDTH 400000000
+#define NBR_OF_REGIONS 2
+
+static struct crisv32_watch_entry watches[NUMBER_OF_BP] =
+{
+ {regi_marb_bp0},
+ {regi_marb_bp1},
+ {regi_marb_bp2},
+ {regi_marb_bp3}
+};
+
+static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS];
+static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS];
+static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH};
+
+DEFINE_SPINLOCK(arbiter_lock);
+
+static irqreturn_t
+crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs);
+
+static void crisv32_arbiter_config(int region)
+{
+ int slot;
+ int client;
+ int interval = 0;
+ int val[NBR_OF_SLOTS];
+
+ for (slot = 0; slot < NBR_OF_SLOTS; slot++)
+ val[slot] = NBR_OF_CLIENTS + 1;
+
+ for (client = 0; client < NBR_OF_CLIENTS; client++)
+ {
+ int pos;
+ if (!requested_slots[region][client])
+ continue;
+ interval = NBR_OF_SLOTS / requested_slots[region][client];
+ pos = 0;
+ while (pos < NBR_OF_SLOTS)
+ {
+ if (val[pos] != NBR_OF_CLIENTS + 1)
+ pos++;
+ else
+ {
+ val[pos] = client;
+ pos += interval;
+ }
+ }
+ }
+
+ client = 0;
+ for (slot = 0; slot < NBR_OF_SLOTS; slot++)
+ {
+ if (val[slot] == NBR_OF_CLIENTS + 1)
+ {
+ int first = client;
+ while(!active_clients[region][client]) {
+ client = (client + 1) % NBR_OF_CLIENTS;
+ if (client == first)
+ break;
+ }
+ val[slot] = client;
+ client = (client + 1) % NBR_OF_CLIENTS;
+ }
+ if (region == EXT_REGION)
+ REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]);
+ else if (region == INT_REGION)
+ REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]);
+ }
+}
+
+extern char _stext, _etext;
+
+static void crisv32_arbiter_init(void)
+{
+ static int initialized = 0;
+
+ if (initialized)
+ return;
+
+ initialized = 1;
+
+ /* CPU caches are active. */
+ active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1;
+ crisv32_arbiter_config(EXT_REGION);
+ crisv32_arbiter_config(INT_REGION);
+
+ if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, SA_INTERRUPT,
+ "arbiter", NULL))
+ printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
+
+#ifndef CONFIG_ETRAX_KGDB
+ /* Global watch for writes to kernel text segment. */
+ crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext,
+ arbiter_all_clients, arbiter_all_write, NULL);
+#endif
+}
+
+
+
+int crisv32_arbiter_allocate_bandwith(int client, int region,
+ unsigned long bandwidth)
+{
+ int i;
+ int total_assigned = 0;
+ int total_clients = 0;
+ int req;
+
+ crisv32_arbiter_init();
+
+ for (i = 0; i < NBR_OF_CLIENTS; i++)
+ {
+ total_assigned += requested_slots[region][i];
+ total_clients += active_clients[region][i];
+ }
+ req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth);
+
+ if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS)
+ return -ENOMEM;
+
+ active_clients[region][client] = 1;
+ requested_slots[region][client] = req;
+ crisv32_arbiter_config(region);
+
+ return 0;
+}
+
+int crisv32_arbiter_watch(unsigned long start, unsigned long size,
+ unsigned long clients, unsigned long accesses,
+ watch_callback* cb)
+{
+ int i;
+
+ crisv32_arbiter_init();
+
+ if (start > 0x80000000) {
+ printk("Arbiter: %lX doesn't look like a physical address", start);
+ return -EFAULT;
+ }
+
+ spin_lock(&arbiter_lock);
+
+ for (i = 0; i < NUMBER_OF_BP; i++) {
+ if (!watches[i].used) {
+ reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask);
+
+ watches[i].used = 1;
+ watches[i].start = start;
+ watches[i].end = start + size;
+ watches[i].cb = cb;
+
+ REG_WR_INT(marb_bp, watches[i].instance, rw_first_addr, watches[i].start);
+ REG_WR_INT(marb_bp, watches[i].instance, rw_last_addr, watches[i].end);
+ REG_WR_INT(marb_bp, watches[i].instance, rw_op, accesses);
+ REG_WR_INT(marb_bp, watches[i].instance, rw_clients, clients);
+
+ if (i == 0)
+ intr_mask.bp0 = regk_marb_yes;
+ else if (i == 1)
+ intr_mask.bp1 = regk_marb_yes;
+ else if (i == 2)
+ intr_mask.bp2 = regk_marb_yes;
+ else if (i == 3)
+ intr_mask.bp3 = regk_marb_yes;
+
+ REG_WR(marb, regi_marb, rw_intr_mask, intr_mask);
+ spin_unlock(&arbiter_lock);
+
+ return i;
+ }
+ }
+ spin_unlock(&arbiter_lock);
+ return -ENOMEM;
+}
+
+int crisv32_arbiter_unwatch(int id)
+{
+ reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask);
+
+ crisv32_arbiter_init();
+
+ spin_lock(&arbiter_lock);
+
+ if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) {
+ spin_unlock(&arbiter_lock);
+ return -EINVAL;
+ }
+
+ memset(&watches[id], 0, sizeof(struct crisv32_watch_entry));
+
+ if (id == 0)
+ intr_mask.bp0 = regk_marb_no;
+ else if (id == 1)
+ intr_mask.bp2 = regk_marb_no;
+ else if (id == 2)
+ intr_mask.bp2 = regk_marb_no;
+ else if (id == 3)
+ intr_mask.bp3 = regk_marb_no;
+
+ REG_WR(marb, regi_marb, rw_intr_mask, intr_mask);
+
+ spin_unlock(&arbiter_lock);
+ return 0;
+}
+
+extern void show_registers(struct pt_regs *regs);
+
+static irqreturn_t
+crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs)
+{
+ reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr);
+ reg_marb_bp_r_brk_clients r_clients;
+ reg_marb_bp_r_brk_addr r_addr;
+ reg_marb_bp_r_brk_op r_op;
+ reg_marb_bp_r_brk_first_client r_first;
+ reg_marb_bp_r_brk_size r_size;
+ reg_marb_bp_rw_ack ack = {0};
+ reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1};
+ struct crisv32_watch_entry* watch;
+
+ if (masked_intr.bp0) {
+ watch = &watches[0];
+ ack_intr.bp0 = regk_marb_yes;
+ } else if (masked_intr.bp1) {
+ watch = &watches[1];
+ ack_intr.bp1 = regk_marb_yes;
+ } else if (masked_intr.bp2) {
+ watch = &watches[2];
+ ack_intr.bp2 = regk_marb_yes;
+ } else if (masked_intr.bp3) {
+ watch = &watches[3];
+ ack_intr.bp3 = regk_marb_yes;
+ } else {
+ return IRQ_NONE;
+ }
+
+ /* Retrieve all useful information and print it. */
+ r_clients = REG_RD(marb_bp, watch->instance, r_brk_clients);
+ r_addr = REG_RD(marb_bp, watch->instance, r_brk_addr);
+ r_op = REG_RD(marb_bp, watch->instance, r_brk_op);
+ r_first = REG_RD(marb_bp, watch->instance, r_brk_first_client);
+ r_size = REG_RD(marb_bp, watch->instance, r_brk_size);
+
+ printk("Arbiter IRQ\n");
+ printk("Clients %X addr %X op %X first %X size %X\n",
+ REG_TYPE_CONV(int, reg_marb_bp_r_brk_clients, r_clients),
+ REG_TYPE_CONV(int, reg_marb_bp_r_brk_addr, r_addr),
+ REG_TYPE_CONV(int, reg_marb_bp_r_brk_op, r_op),
+ REG_TYPE_CONV(int, reg_marb_bp_r_brk_first_client, r_first),
+ REG_TYPE_CONV(int, reg_marb_bp_r_brk_size, r_size));
+
+ REG_WR(marb_bp, watch->instance, rw_ack, ack);
+ REG_WR(marb, regi_marb, rw_ack_intr, ack_intr);
+
+ printk("IRQ occured at %lX\n", regs->erp);
+
+ if (watch->cb)
+ watch->cb();
+
+
+ return IRQ_HANDLED;
+}
diff --git a/arch/cris/arch-v32/kernel/asm-offsets.c b/arch/cris/arch-v32/kernel/asm-offsets.c
new file mode 100644
index 0000000..15b3d93
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/asm-offsets.c
@@ -0,0 +1,49 @@
+#include <linux/sched.h>
+#include <asm/thread_info.h>
+
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ */
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry))
+ ENTRY(orig_r10);
+ ENTRY(r13);
+ ENTRY(r12);
+ ENTRY(r11);
+ ENTRY(r10);
+ ENTRY(r9);
+ ENTRY(acr);
+ ENTRY(srs);
+ ENTRY(mof);
+ ENTRY(ccs);
+ ENTRY(srp);
+ BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
+ ENTRY(task);
+ ENTRY(flags);
+ ENTRY(preempt_count);
+ BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry))
+ ENTRY(ksp);
+ ENTRY(usp);
+ ENTRY(ccs);
+ BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry))
+ ENTRY(pid);
+ BLANK();
+ DEFINE(LCLONE_VM, CLONE_VM);
+ DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED);
+ return 0;
+}
diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c
new file mode 100644
index 0000000..2c3bb9a
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/crisksyms.c
@@ -0,0 +1,24 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/intmem.h>
+#include <asm/arch/pinmux.h>
+
+/* Functions for allocating DMA channels */
+EXPORT_SYMBOL(crisv32_request_dma);
+EXPORT_SYMBOL(crisv32_free_dma);
+
+/* Functions for handling internal RAM */
+EXPORT_SYMBOL(crisv32_intmem_alloc);
+EXPORT_SYMBOL(crisv32_intmem_free);
+EXPORT_SYMBOL(crisv32_intmem_phys_to_virt);
+EXPORT_SYMBOL(crisv32_intmem_virt_to_phys);
+
+/* Functions for handling pinmux */
+EXPORT_SYMBOL(crisv32_pinmux_alloc);
+EXPORT_SYMBOL(crisv32_pinmux_dealloc);
+
+/* Functions masking/unmasking interrupts */
+EXPORT_SYMBOL(mask_irq);
+EXPORT_SYMBOL(unmask_irq);
diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c
new file mode 100644
index 0000000..ffc1ebf
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/debugport.c
@@ -0,0 +1,461 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/arch/hwregs/ser_defs.h>
+#include <asm/arch/hwregs/dma_defs.h>
+#include <asm/arch/pinmux.h>
+
+#include <asm/irq.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+struct dbg_port
+{
+ unsigned char nbr;
+ unsigned long instance;
+ unsigned int started;
+ unsigned long baudrate;
+ unsigned char parity;
+ unsigned int bits;
+};
+
+struct dbg_port ports[] =
+{
+ {
+ 0,
+ regi_ser0,
+ 0,
+ 115200,
+ 'N',
+ 8
+ },
+ {
+ 1,
+ regi_ser1,
+ 0,
+ 115200,
+ 'N',
+ 8
+ },
+ {
+ 2,
+ regi_ser2,
+ 0,
+ 115200,
+ 'N',
+ 8
+ },
+ {
+ 3,
+ regi_ser3,
+ 0,
+ 115200,
+ 'N',
+ 8
+ }
+};
+static struct dbg_port *port =
+#if defined(CONFIG_ETRAX_DEBUG_PORT0)
+&ports[0];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+&ports[1];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+&ports[2];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+&ports[3];
+#else
+NULL;
+#endif
+
+#ifdef CONFIG_ETRAX_KGDB
+static struct dbg_port *kgdb_port =
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+&ports[0];
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+&ports[1];
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+&ports[2];
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+&ports[3];
+#else
+NULL;
+#endif
+#endif
+
+#ifdef CONFIG_ETRAXFS_SIM
+extern void print_str( const char *str );
+static char buffer[1024];
+static char msg[] = "Debug: ";
+static int buffer_pos = sizeof(msg) - 1;
+#endif
+
+extern struct tty_driver *serial_driver;
+
+static void
+start_port(struct dbg_port* p)
+{
+ if (!p)
+ return;
+
+ if (p->started)
+ return;
+ p->started = 1;
+
+ if (p->nbr == 1)
+ crisv32_pinmux_alloc_fixed(pinmux_ser1);
+ else if (p->nbr == 2)
+ crisv32_pinmux_alloc_fixed(pinmux_ser2);
+ else if (p->nbr == 3)
+ crisv32_pinmux_alloc_fixed(pinmux_ser3);
+
+ /* Set up serial port registers */
+ reg_ser_rw_tr_ctrl tr_ctrl = {0};
+ reg_ser_rw_tr_dma_en tr_dma_en = {0};
+
+ reg_ser_rw_rec_ctrl rec_ctrl = {0};
+ reg_ser_rw_tr_baud_div tr_baud_div = {0};
+ reg_ser_rw_rec_baud_div rec_baud_div = {0};
+
+ tr_ctrl.base_freq = rec_ctrl.base_freq = regk_ser_f29_493;
+ tr_dma_en.en = rec_ctrl.dma_mode = regk_ser_no;
+ tr_baud_div.div = rec_baud_div.div = 29493000 / p->baudrate / 8;
+ tr_ctrl.en = rec_ctrl.en = 1;
+
+ if (p->parity == 'O')
+ {
+ tr_ctrl.par_en = regk_ser_yes;
+ tr_ctrl.par = regk_ser_odd;
+ rec_ctrl.par_en = regk_ser_yes;
+ rec_ctrl.par = regk_ser_odd;
+ }
+ else if (p->parity == 'E')
+ {
+ tr_ctrl.par_en = regk_ser_yes;
+ tr_ctrl.par = regk_ser_even;
+ rec_ctrl.par_en = regk_ser_yes;
+ rec_ctrl.par = regk_ser_odd;
+ }
+
+ if (p->bits == 7)
+ {
+ tr_ctrl.data_bits = regk_ser_bits7;
+ rec_ctrl.data_bits = regk_ser_bits7;
+ }
+
+ REG_WR (ser, p->instance, rw_tr_baud_div, tr_baud_div);
+ REG_WR (ser, p->instance, rw_rec_baud_div, rec_baud_div);
+ REG_WR (ser, p->instance, rw_tr_dma_en, tr_dma_en);
+ REG_WR (ser, p->instance, rw_tr_ctrl, tr_ctrl);
+ REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl);
+}
+
+/* No debug */
+#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+ return;
+}
+
+/* Target debug */
+#elif !defined(CONFIG_ETRAXFS_SIM)
+
+static void
+console_write_direct(struct console *co, const char *buf, unsigned int len)
+{
+ int i;
+ reg_ser_r_stat_din stat;
+ reg_ser_rw_tr_dma_en tr_dma_en, old;
+
+ /* Switch to manual mode */
+ tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en);
+ if (tr_dma_en.en == regk_ser_yes) {
+ tr_dma_en.en = regk_ser_no;
+ REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en);
+ }
+
+ /* Send data */
+ for (i = 0; i < len; i++) {
+ /* LF -> CRLF */
+ if (buf[i] == '\n') {
+ do {
+ stat = REG_RD (ser, port->instance, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT (ser, port->instance, rw_dout, '\r');
+ }
+ /* Wait until transmitter is ready and send.*/
+ do {
+ stat = REG_RD (ser, port->instance, r_stat_din);
+ } while (!stat.tr_rdy);
+ REG_WR_INT (ser, port->instance, rw_dout, buf[i]);
+ }
+
+ /* Restore mode */
+ if (tr_dma_en.en != old.en)
+ REG_WR(ser, port->instance, rw_tr_dma_en, old);
+}
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+ if (!port)
+ return;
+ console_write_direct(co, buf, len);
+}
+
+
+
+#else
+
+/* VCS debug */
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+ char* pos;
+ pos = memchr(buf, '\n', len);
+ if (pos) {
+ int l = ++pos - buf;
+ memcpy(buffer + buffer_pos, buf, l);
+ memcpy(buffer, msg, sizeof(msg) - 1);
+ buffer[buffer_pos + l] = '\0';
+ print_str(buffer);
+ buffer_pos = sizeof(msg) - 1;
+ if (pos - buf != len) {
+ memcpy(buffer + buffer_pos, pos, len - l);
+ buffer_pos += len - l;
+ }
+ } else {
+ memcpy(buffer + buffer_pos, buf, len);
+ buffer_pos += len;
+ }
+}
+
+#endif
+
+int raw_printk(const char *fmt, ...)
+{
+ static char buf[1024];
+ int printed_len;
+ va_list args;
+ va_start(args, fmt);
+ printed_len = vsnprintf(buf, sizeof(buf), fmt, args);
+ va_end(args);
+ console_write(NULL, buf, strlen(buf));
+ return printed_len;
+}
+
+void
+stupid_debug(char* buf)
+{
+ console_write(NULL, buf, strlen(buf));
+}
+
+#ifdef CONFIG_ETRAX_KGDB
+/* Use polling to get a single character from the kernel debug port */
+int
+getDebugChar(void)
+{
+ reg_ser_rs_status_data stat;
+ reg_ser_rw_ack_intr ack_intr = { 0 };
+
+ do {
+ stat = REG_RD(ser, kgdb_instance, rs_status_data);
+ } while (!stat.data_avail);
+
+ /* Ack the data_avail interrupt. */
+ ack_intr.data_avail = 1;
+ REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr);
+
+ return stat.data;
+}
+
+/* Use polling to put a single character to the kernel debug port */
+void
+putDebugChar(int val)
+{
+ reg_ser_r_status_data stat;
+ do {
+ stat = REG_RD (ser, kgdb_instance, r_status_data);
+ } while (!stat.tr_ready);
+ REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val));
+}
+#endif /* CONFIG_ETRAX_KGDB */
+
+static int __init
+console_setup(struct console *co, char *options)
+{
+ char* s;
+
+ if (options) {
+ port = &ports[co->index];
+ port->baudrate = 115200;
+ port->parity = 'N';
+ port->bits = 8;
+ port->baudrate = simple_strtoul(options, NULL, 10);
+ s = options;
+ while(*s >= '0' && *s <= '9')
+ s++;
+ if (*s) port->parity = *s++;
+ if (*s) port->bits = *s++ - '0';
+ port->started = 0;
+ start_port(port);
+ }
+ return 0;
+}
+
+/* This is a dummy serial device that throws away anything written to it.
+ * This is used when no debug output is wanted.
+ */
+static struct tty_driver dummy_driver;
+
+static int dummy_open(struct tty_struct *tty, struct file * filp)
+{
+ return 0;
+}
+
+static void dummy_close(struct tty_struct *tty, struct file * filp)
+{
+}
+
+static int dummy_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ return count;
+}
+
+static int
+dummy_write_room(struct tty_struct *tty)
+{
+ return 8192;
+}
+
+void __init
+init_dummy_console(void)
+{
+ memset(&dummy_driver, 0, sizeof(struct tty_driver));
+ dummy_driver.driver_name = "serial";
+ dummy_driver.name = "ttyS";
+ dummy_driver.major = TTY_MAJOR;
+ dummy_driver.minor_start = 68;
+ dummy_driver.num = 1; /* etrax100 has 4 serial ports */
+ dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
+ dummy_driver.subtype = SERIAL_TYPE_NORMAL;
+ dummy_driver.init_termios = tty_std_termios;
+ dummy_driver.init_termios.c_cflag =
+ B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+ dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+
+ dummy_driver.open = dummy_open;
+ dummy_driver.close = dummy_close;
+ dummy_driver.write = dummy_write;
+ dummy_driver.write_room = dummy_write_room;
+ if (tty_register_driver(&dummy_driver))
+ panic("Couldn't register dummy serial driver\n");
+}
+
+static struct tty_driver*
+crisv32_console_device(struct console* co, int *index)
+{
+ if (port)
+ *index = port->nbr;
+ return port ? serial_driver : &dummy_driver;
+}
+
+static struct console sercons = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : crisv32_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : -1,
+ cflag : 0,
+ next : NULL
+};
+static struct console sercons0 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : crisv32_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 0,
+ cflag : 0,
+ next : NULL
+};
+
+static struct console sercons1 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : crisv32_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 1,
+ cflag : 0,
+ next : NULL
+};
+static struct console sercons2 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : crisv32_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 2,
+ cflag : 0,
+ next : NULL
+};
+static struct console sercons3 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : crisv32_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 3,
+ cflag : 0,
+ next : NULL
+};
+
+/* Register console for printk's, etc. */
+int __init
+init_etrax_debug(void)
+{
+ static int first = 1;
+
+ if (!first) {
+ unregister_console(&sercons);
+ register_console(&sercons0);
+ register_console(&sercons1);
+ register_console(&sercons2);
+ register_console(&sercons3);
+ init_dummy_console();
+ return 0;
+ }
+ first = 0;
+ register_console(&sercons);
+ start_port(port);
+
+#ifdef CONFIG_ETRAX_KGDB
+ start_port(kgdb_port);
+#endif /* CONFIG_ETRAX_KGDB */
+ return 0;
+}
+
+__initcall(init_etrax_debug);
diff --git a/arch/cris/arch-v32/kernel/dma.c b/arch/cris/arch-v32/kernel/dma.c
new file mode 100644
index 0000000..b92e857
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/dma.c
@@ -0,0 +1,224 @@
+/* Wrapper for DMA channel allocator that starts clocks etc */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <asm/dma.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/marb_defs.h>
+#include <asm/arch/hwregs/config_defs.h>
+#include <asm/arch/hwregs/strmux_defs.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+#include <asm/arch/arbiter.h>
+
+static char used_dma_channels[MAX_DMA_CHANNELS];
+static const char * used_dma_channels_users[MAX_DMA_CHANNELS];
+
+static DEFINE_SPINLOCK(dma_lock);
+
+int crisv32_request_dma(unsigned int dmanr, const char * device_id,
+ unsigned options, unsigned int bandwidth,
+ enum dma_owner owner)
+{
+ unsigned long flags;
+ reg_config_rw_clk_ctrl clk_ctrl;
+ reg_strmux_rw_cfg strmux_cfg;
+
+ if (crisv32_arbiter_allocate_bandwith(dmanr,
+ options & DMA_INT_MEM ? INT_REGION : EXT_REGION,
+ bandwidth))
+ return -ENOMEM;
+
+ spin_lock_irqsave(&dma_lock, flags);
+
+ if (used_dma_channels[dmanr]) {
+ spin_unlock_irqrestore(&dma_lock, flags);
+ if (options & DMA_VERBOSE_ON_ERROR) {
+ printk("Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]);
+ }
+ if (options & DMA_PANIC_ON_ERROR)
+ panic("request_dma error!");
+ return -EBUSY;
+ }
+ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
+
+ switch(dmanr)
+ {
+ case 0:
+ case 1:
+ clk_ctrl.dma01_eth0 = 1;
+ break;
+ case 2:
+ case 3:
+ clk_ctrl.dma23 = 1;
+ break;
+ case 4:
+ case 5:
+ clk_ctrl.dma45 = 1;
+ break;
+ case 6:
+ case 7:
+ clk_ctrl.dma67 = 1;
+ break;
+ case 8:
+ case 9:
+ clk_ctrl.dma89_strcop = 1;
+ break;
+#if MAX_DMA_CHANNELS-1 != 9
+#error Check dma.c
+#endif
+ default:
+ spin_unlock_irqrestore(&dma_lock, flags);
+ if (options & DMA_VERBOSE_ON_ERROR) {
+ printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1);
+ }
+
+ if (options & DMA_PANIC_ON_ERROR)
+ panic("request_dma error!");
+ return -EINVAL;
+ }
+
+ switch(owner)
+ {
+ case dma_eth0:
+ if (dmanr == 0)
+ strmux_cfg.dma0 = regk_strmux_eth0;
+ else if (dmanr == 1)
+ strmux_cfg.dma1 = regk_strmux_eth0;
+ else
+ panic("Invalid DMA channel for eth0\n");
+ break;
+ case dma_eth1:
+ if (dmanr == 6)
+ strmux_cfg.dma6 = regk_strmux_eth1;
+ else if (dmanr == 7)
+ strmux_cfg.dma7 = regk_strmux_eth1;
+ else
+ panic("Invalid DMA channel for eth1\n");
+ break;
+ case dma_iop0:
+ if (dmanr == 2)
+ strmux_cfg.dma2 = regk_strmux_iop0;
+ else if (dmanr == 3)
+ strmux_cfg.dma3 = regk_strmux_iop0;
+ else
+ panic("Invalid DMA channel for iop0\n");
+ break;
+ case dma_iop1:
+ if (dmanr == 4)
+ strmux_cfg.dma4 = regk_strmux_iop1;
+ else if (dmanr == 5)
+ strmux_cfg.dma5 = regk_strmux_iop1;
+ else
+ panic("Invalid DMA channel for iop1\n");
+ break;
+ case dma_ser0:
+ if (dmanr == 6)
+ strmux_cfg.dma6 = regk_strmux_ser0;
+ else if (dmanr == 7)
+ strmux_cfg.dma7 = regk_strmux_ser0;
+ else
+ panic("Invalid DMA channel for ser0\n");
+ break;
+ case dma_ser1:
+ if (dmanr == 4)
+ strmux_cfg.dma4 = regk_strmux_ser1;
+ else if (dmanr == 5)
+ strmux_cfg.dma5 = regk_strmux_ser1;
+ else
+ panic("Invalid DMA channel for ser1\n");
+ break;
+ case dma_ser2:
+ if (dmanr == 2)
+ strmux_cfg.dma2 = regk_strmux_ser2;
+ else if (dmanr == 3)
+ strmux_cfg.dma3 = regk_strmux_ser2;
+ else
+ panic("Invalid DMA channel for ser2\n");
+ break;
+ case dma_ser3:
+ if (dmanr == 8)
+ strmux_cfg.dma8 = regk_strmux_ser3;
+ else if (dmanr == 9)
+ strmux_cfg.dma9 = regk_strmux_ser3;
+ else
+ panic("Invalid DMA channel for ser3\n");
+ break;
+ case dma_sser0:
+ if (dmanr == 4)
+ strmux_cfg.dma4 = regk_strmux_sser0;
+ else if (dmanr == 5)
+ strmux_cfg.dma5 = regk_strmux_sser0;
+ else
+ panic("Invalid DMA channel for sser0\n");
+ break;
+ case dma_sser1:
+ if (dmanr == 6)
+ strmux_cfg.dma6 = regk_strmux_sser1;
+ else if (dmanr == 7)
+ strmux_cfg.dma7 = regk_strmux_sser1;
+ else
+ panic("Invalid DMA channel for sser1\n");
+ break;
+ case dma_ata:
+ if (dmanr == 2)
+ strmux_cfg.dma2 = regk_strmux_ata;
+ else if (dmanr == 3)
+ strmux_cfg.dma3 = regk_strmux_ata;
+ else
+ panic("Invalid DMA channel for ata\n");
+ break;
+ case dma_strp:
+ if (dmanr == 8)
+ strmux_cfg.dma8 = regk_strmux_strcop;
+ else if (dmanr == 9)
+ strmux_cfg.dma9 = regk_strmux_strcop;
+ else
+ panic("Invalid DMA channel for strp\n");
+ break;
+ case dma_ext0:
+ if (dmanr == 6)
+ strmux_cfg.dma6 = regk_strmux_ext0;
+ else
+ panic("Invalid DMA channel for ext0\n");
+ break;
+ case dma_ext1:
+ if (dmanr == 7)
+ strmux_cfg.dma7 = regk_strmux_ext1;
+ else
+ panic("Invalid DMA channel for ext1\n");
+ break;
+ case dma_ext2:
+ if (dmanr == 2)
+ strmux_cfg.dma2 = regk_strmux_ext2;
+ else if (dmanr == 8)
+ strmux_cfg.dma8 = regk_strmux_ext2;
+ else
+ panic("Invalid DMA channel for ext2\n");
+ break;
+ case dma_ext3:
+ if (dmanr == 3)
+ strmux_cfg.dma3 = regk_strmux_ext3;
+ else if (dmanr == 9)
+ strmux_cfg.dma9 = regk_strmux_ext2;
+ else
+ panic("Invalid DMA channel for ext2\n");
+ break;
+ }
+
+ used_dma_channels[dmanr] = 1;
+ used_dma_channels_users[dmanr] = device_id;
+ REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl);
+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
+ spin_unlock_irqrestore(&dma_lock,flags);
+ return 0;
+}
+
+void crisv32_free_dma(unsigned int dmanr)
+{
+ spin_lock(&dma_lock);
+ used_dma_channels[dmanr] = 0;
+ spin_unlock(&dma_lock);
+}
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
new file mode 100644
index 0000000..a8ed55e
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -0,0 +1,820 @@
+/*
+ * Copyright (C) 2000-2003 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ * Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
+ *
+ * Code for the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * ptrace needs to have all regs on the stack.
+ * if the order here is changed, it needs to be
+ * updated in fork.c:copy_process, signal.c:do_signal,
+ * ptrace.c and ptrace.h
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/arch/offset.h>
+
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/intr_vect_defs_asm.h>
+
+ ;; Exported functions.
+ .globl system_call
+ .globl ret_from_intr
+ .globl ret_from_fork
+ .globl resume
+ .globl multiple_interrupt
+ .globl nmi_interrupt
+ .globl spurious_interrupt
+ .globl do_sigtrap
+ .globl gdb_handle_exception
+ .globl sys_call_table
+
+ ; Check if preemptive kernel scheduling should be done.
+#ifdef CONFIG_PREEMPT
+_resume_kernel:
+ di
+ ; Load current task struct.
+ movs.w -8192, $r0 ; THREAD_SIZE = 8192
+ and.d $sp, $r0
+
+ addoq +TI_preempt_count, $r0, $acr
+ move.d [$acr], $r10 ; Preemption disabled?
+ bne _Rexit
+ nop
+
+_need_resched:
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r10
+ btstq TIF_NEED_RESCHED, $r10 ; Check if need_resched is set.
+ bpl _Rexit
+ nop
+
+ ; Do preemptive kernel scheduling.
+ jsr preempt_schedule_irq
+ nop
+
+ ; Load new task struct.
+ movs.w -8192, $r0 ; THREAD_SIZE = 8192.
+ and.d $sp, $r0
+
+ ; One more time with new task.
+ ba _need_resched
+ nop
+#else
+#define _resume_kernel _Rexit
+#endif
+
+ ; Called at exit from fork. schedule_tail must be called to drop
+ ; spinlock if CONFIG_PREEMPT.
+ret_from_fork:
+ jsr schedule_tail
+ nop
+ ba ret_from_sys_call
+ nop
+
+ret_from_intr:
+ ;; Check for resched if preemptive kernel, or if we're going back to
+ ;; user-mode. This test matches the user_regs(regs) macro. Don't simply
+ ;; test CCS since that doesn't necessarily reflect what mode we'll
+ ;; return into.
+ addoq +PT_ccs, $sp, $acr
+ move.d [$acr], $r0
+ btstq 16, $r0 ; User-mode flag.
+ bpl _resume_kernel
+
+ ; Note that di below is in delay slot.
+
+_resume_userspace:
+ di ; So need_resched and sigpending don't change.
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ addoq +TI_flags, $r0, $acr ; current->work
+ move.d [$acr], $r10
+ and.d _TIF_WORK_MASK, $r10 ; Work to be done on return?
+ bne _work_pending
+ nop
+ ba _Rexit
+ nop
+
+ ;; The system_call is called by a BREAK instruction, which looks pretty
+ ;; much like any other exception.
+ ;;
+ ;; System calls can't be made from interrupts but we still stack ERP
+ ;; to have a complete stack frame.
+ ;;
+ ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,
+ ;; r13,mof,srp
+ ;;
+ ;; This function looks on the _surface_ like spaghetti programming, but it's
+ ;; really designed so that the fast-path does not force cache-loading of
+ ;; non-used instructions. Only the non-common cases cause the outlined code
+ ;; to run..
+
+system_call:
+ ;; Stack-frame similar to the irq heads, which is reversed in
+ ;; ret_from_sys_call.
+ subq 12, $sp ; Skip EXS, EDA.
+ move $erp, [$sp]
+ subq 4, $sp
+ move $srp, [$sp]
+ subq 4, $sp
+ move $ccs, [$sp]
+ subq 4, $sp
+ ei ; Allow IRQs while handling system call
+ move $spc, [$sp]
+ subq 4, $sp
+ move $mof, [$sp]
+ subq 4, $sp
+ move $srs, [$sp]
+ subq 4, $sp
+ move.d $acr, [$sp]
+ subq 14*4, $sp ; Make room for R0-R13.
+ movem $r13, [$sp] ; Push R0-R13
+ subq 4, $sp
+ move.d $r10, [$sp] ; Push orig_r10.
+
+; Set S-bit when kernel debugging to keep hardware breakpoints active.
+#ifdef CONFIG_ETRAX_KGDB
+ move $ccs, $r0
+ or.d (1<<9), $r0
+ move $r0, $ccs
+#endif
+
+ movs.w -ENOSYS, $r0
+ addoq +PT_r10, $sp, $acr
+ move.d $r0, [$acr]
+
+ ;; Check if this process is syscall-traced.
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r0
+ btstq TIF_SYSCALL_TRACE, $r0
+ bmi _syscall_trace_entry
+ nop
+
+_syscall_traced:
+ ;; Check for sanity in the requested syscall number.
+ cmpu.w NR_syscalls, $r9
+ bhs ret_from_sys_call
+ lslq 2, $r9 ; Multiply by 4, in the delay slot.
+
+ ;; The location on the stack for the register structure is passed as a
+ ;; seventh argument. Some system calls need this.
+ move.d $sp, $r0
+ subq 4, $sp
+ move.d $r0, [$sp]
+
+ ;; The registers carrying parameters (R10-R13) are intact. The optional
+ ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them
+ ;; back on the stack.
+ subq 4, $sp
+ move $srp, [$sp]
+ subq 4, $sp
+ move $mof, [$sp]
+
+ ;; Actually to the system call.
+ addo.d +sys_call_table, $r9, $acr
+ move.d [$acr], $acr
+ jsr $acr
+ nop
+
+ addq 3*4, $sp ; Pop the mof, srp and regs parameters.
+ addoq +PT_r10, $sp, $acr
+ move.d $r10, [$acr] ; Save the return value.
+
+ moveq 1, $r9 ; "Parameter" to ret_from_sys_call to
+ ; show it was a sys call.
+
+ ;; Fall through into ret_from_sys_call to return.
+
+ret_from_sys_call:
+ ;; R9 is a parameter:
+ ;; >= 1 from syscall
+ ;; 0 from irq
+
+ ;; Get the current task-struct pointer.
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ di ; Make sure need_resched and sigpending don't change.
+
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r1
+ and.d _TIF_ALLWORK_MASK, $r1
+ bne _syscall_exit_work
+ nop
+
+_Rexit:
+ ;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
+ ;; and ptregs.h.
+ addq 4, $sp ; Skip orig_r10.
+ movem [$sp+], $r13 ; Registers R0-R13.
+ move.d [$sp+], $acr
+ move [$sp], $srs
+ addq 4, $sp
+ move [$sp+], $mof
+ move [$sp+], $spc
+ move [$sp+], $ccs
+ move [$sp+], $srp
+ move [$sp+], $erp
+ addq 8, $sp ; Skip EXS, EDA.
+ jump $erp
+ rfe ; Restore condition code stack in delay-slot.
+
+ ;; We get here after doing a syscall if extra work might need to be done
+ ;; perform syscall exit tracing if needed.
+
+_syscall_exit_work:
+ ;; R0 contains current at this point and irq's are disabled.
+
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r1
+ btstq TIF_SYSCALL_TRACE, $r1
+ bpl _work_pending
+ nop
+ ei
+ move.d $r9, $r1 ; Preserve R9.
+ jsr do_syscall_trace
+ nop
+ move.d $r1, $r9
+ ba _resume_userspace
+ nop
+
+_work_pending:
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r10
+ btstq TIF_NEED_RESCHED, $r10 ; Need resched?
+ bpl _work_notifysig ; No, must be signal/notify.
+ nop
+
+_work_resched:
+ move.d $r9, $r1 ; Preserve R9.
+ jsr schedule
+ nop
+ move.d $r1, $r9
+ di
+
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r1
+ and.d _TIF_WORK_MASK, $r1 ; Ignore sycall trace counter.
+ beq _Rexit
+ nop
+ btstq TIF_NEED_RESCHED, $r1
+ bmi _work_resched ; current->work.need_resched.
+ nop
+
+_work_notifysig:
+ ;; Deal with pending signals and notify-resume requests.
+
+ addoq +TI_flags, $r0, $acr
+ move.d [$acr], $r13 ; The thread_info_flags parameter.
+ move.d $r9, $r10 ; do_notify_resume syscall/irq param.
+ moveq 0, $r11 ; oldset param - 0 in this case.
+ move.d $sp, $r12 ; The regs param.
+ jsr do_notify_resume
+ nop
+
+ ba _Rexit
+ nop
+
+ ;; We get here as a sidetrack when we've entered a syscall with the
+ ;; trace-bit set. We need to call do_syscall_trace and then continue
+ ;; with the call.
+
+_syscall_trace_entry:
+ ;; PT_r10 in the frame contains -ENOSYS as required, at this point.
+
+ jsr do_syscall_trace
+ nop
+
+ ;; Now re-enter the syscall code to do the syscall itself. We need to
+ ;; restore R9 here to contain the wanted syscall, and the other
+ ;; parameter-bearing registers.
+ addoq +PT_r9, $sp, $acr
+ move.d [$acr], $r9
+ addoq +PT_orig_r10, $sp, $acr
+ move.d [$acr], $r10 ; PT_r10 is already -ENOSYS.
+ addoq +PT_r11, $sp, $acr
+ move.d [$acr], $r11
+ addoq +PT_r12, $sp, $acr
+ move.d [$acr], $r12
+ addoq +PT_r13, $sp, $acr
+ move.d [$acr], $r13
+ addoq +PT_mof, $sp, $acr
+ move [$acr], $mof
+ addoq +PT_srp, $sp, $acr
+ move [$acr], $srp
+
+ ba _syscall_traced
+ nop
+
+ ;; Resume performs the actual task-switching, by switching stack
+ ;; pointers. Input arguments are:
+ ;;
+ ;; R10 = prev
+ ;; R11 = next
+ ;; R12 = thread offset in task struct.
+ ;;
+ ;; Returns old current in R10.
+
+resume:
+ subq 4, $sp
+ move $srp, [$sp] ; Keep old/new PC on the stack.
+ add.d $r12, $r10 ; R10 = current tasks tss.
+ addoq +THREAD_ccs, $r10, $acr
+ move $ccs, [$acr] ; Save IRQ enable state.
+ di
+
+ addoq +THREAD_usp, $r10, $acr
+ move $usp, [$acr] ; Save user-mode stackpointer.
+
+ ;; See copy_thread for the reason why register R9 is saved.
+ subq 10*4, $sp
+ movem $r9, [$sp] ; Save non-scratch registers and R9.
+
+ addoq +THREAD_ksp, $r10, $acr
+ move.d $sp, [$acr] ; Save kernel SP for old task.
+
+ move.d $sp, $r10 ; Return last running task in R10.
+ and.d -8192, $r10 ; Get thread_info from stackpointer.
+ addoq +TI_task, $r10, $acr
+ move.d [$acr], $r10 ; Get task.
+ add.d $r12, $r11 ; Find the new tasks tss.
+ addoq +THREAD_ksp, $r11, $acr
+ move.d [$acr], $sp ; Switch to new stackframe.
+ movem [$sp+], $r9 ; Restore non-scratch registers and R9.
+
+ addoq +THREAD_usp, $r11, $acr
+ move [$acr], $usp ; Restore user-mode stackpointer.
+
+ addoq +THREAD_ccs, $r11, $acr
+ move [$acr], $ccs ; Restore IRQ enable status.
+ move.d [$sp+], $acr
+ jump $acr ; Restore PC.
+ nop
+
+nmi_interrupt:
+
+;; If we receive a watchdog interrupt while it is not expected, then set
+;; up a canonical frame and dump register contents before dying.
+
+ ;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
+ subq 12, $sp ; Skip EXS, EDA.
+ move $nrp, [$sp]
+ subq 4, $sp
+ move $srp, [$sp]
+ subq 4, $sp
+ move $ccs, [$sp]
+ subq 4, $sp
+ move $spc, [$sp]
+ subq 4, $sp
+ move $mof, [$sp]
+ subq 4, $sp
+ move $srs, [$sp]
+ subq 4, $sp
+ move.d $acr, [$sp]
+ subq 14*4, $sp ; Make room for R0-R13.
+ movem $r13, [$sp] ; Push R0-R13.
+ subq 4, $sp
+ move.d $r10, [$sp] ; Push orig_r10.
+ move.d REG_ADDR(intr_vect, regi_irq, r_nmi), $r0
+ move.d [$r0], $r0
+ btstq REG_BIT(intr_vect, r_nmi, watchdog), $r0
+ bpl 1f
+ nop
+ jsr handle_watchdog_bite ; In time.c.
+ move.d $sp, $r10 ; Pointer to registers
+1: btstq REG_BIT(intr_vect, r_nmi, ext), $r0
+ bpl 1f
+ nop
+ jsr handle_nmi
+ move.d $sp, $r10 ; Pointer to registers
+1: addq 4, $sp ; Skip orig_r10
+ movem [$sp+], $r13
+ move.d [$sp+], $acr
+ move [$sp], $srs
+ addq 4, $sp
+ move [$sp+], $mof
+ move [$sp+], $spc
+ move [$sp+], $ccs
+ move [$sp+], $srp
+ move [$sp+], $nrp
+ addq 8, $sp ; Skip EXS, EDA.
+ jump $nrp
+ rfn
+
+ .comm cause_of_death, 4 ;; Don't declare this anywhere.
+
+spurious_interrupt:
+ di
+ jump hard_reset_now
+ nop
+
+ ;; This handles the case when multiple interrupts arrive at the same
+ ;; time. Jump to the first set interrupt bit in a priotiry fashion. The
+ ;; hardware will call the unserved interrupts after the handler
+ ;; finishes.
+multiple_interrupt:
+ ;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
+ subq 12, $sp ; Skip EXS, EDA.
+ move $erp, [$sp]
+ subq 4, $sp
+ move $srp, [$sp]
+ subq 4, $sp
+ move $ccs, [$sp]
+ subq 4, $sp
+ move $spc, [$sp]
+ subq 4, $sp
+ move $mof, [$sp]
+ subq 4, $sp
+ move $srs, [$sp]
+ subq 4, $sp
+ move.d $acr, [$sp]
+ subq 14*4, $sp ; Make room for R0-R13.
+ movem $r13, [$sp] ; Push R0-R13.
+ subq 4, $sp
+ move.d $r10, [$sp] ; Push orig_r10.
+
+; Set S-bit when kernel debugging to keep hardware breakpoints active.
+#ifdef CONFIG_ETRAX_KGDB
+ move $ccs, $r0
+ or.d (1<<9), $r0
+ move $r0, $ccs
+#endif
+
+ jsr crisv32_do_multiple
+ move.d $sp, $r10
+ jump ret_from_intr
+ nop
+
+do_sigtrap:
+ ;; Sigtraps the process that executed the BREAK instruction. Creates a
+ ;; frame that Rexit expects.
+ subq 4, $sp
+ move $eda, [$sp]
+ subq 4, $sp
+ move $exs, [$sp]
+ subq 4, $sp
+ move $erp, [$sp]
+ subq 4, $sp
+ move $srp, [$sp]
+ subq 4, $sp
+ move $ccs, [$sp]
+ subq 4, $sp
+ move $spc, [$sp]
+ subq 4, $sp
+ move $mof, [$sp]
+ subq 4, $sp
+ move $srs, [$sp]
+ subq 4, $sp
+ move.d $acr, [$sp]
+ di ; Need to disable irq's at this point.
+ subq 14*4, $sp ; Make room for r0-r13.
+ movem $r13, [$sp] ; Push the r0-r13 registers.
+ subq 4, $sp
+ move.d $r10, [$sp] ; Push orig_r10.
+
+ movs.w -8192, $r9 ; THREAD_SIZE == 8192
+ and.d $sp, $r9
+
+ ;; thread_info as first parameter
+ move.d $r9, $r10
+ moveq 5, $r11 ; SIGTRAP as second argument.
+ jsr ugdb_trap_user
+ nop
+ jump ret_from_intr ; Use the return routine for interrupts.
+ nop
+
+gdb_handle_exception:
+ subq 4, $sp
+ move.d $r0, [$sp]
+#ifdef CONFIG_ETRAX_KGDB
+ move $ccs, $r0 ; U-flag not affected by previous insns.
+ btstq 16, $r0 ; Test the U-flag.
+ bmi _ugdb_handle_exception ; Go to user mode debugging.
+ nop ; Empty delay-slot (cannot pop R0 here).
+ ba kgdb_handle_exception ; Go to kernel debugging.
+ move.d [$sp+], $r0 ; Restore R0 in delay slot.
+#endif
+
+_ugdb_handle_exception:
+ ba do_sigtrap ; SIGTRAP the offending process.
+ move.d [$sp+], $r0 ; Restore R0 in delay slot.
+
+ .data
+
+ .section .rodata,"a"
+sys_call_table:
+ .long sys_restart_syscall ; 0 - old "setup()" system call, used
+ ; for restarting.
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys( */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old sys_olduname holder */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long sys_select /* was old_select in Linux/E100 */
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* sys_ioperm in i386 */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* old sys_uname holder */
+ .long sys_ni_syscall /* sys_iopl in i386 */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* vm86old in i386 */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* sys_modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* sys_vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* sys_set_thread_area */
+ .long sys_ni_syscall /* sys_get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_ni_syscall /* sys_mbind */
+ .long sys_ni_syscall /* 275 sys_get_mempolicy */
+ .long sys_ni_syscall /* sys_set_mempolicy */
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_ni_syscall /* reserved for kexec */
+ .long sys_waitid
+
+ /*
+ * NOTE!! This doesn't have to be exact - we just have
+ * to make sure we have _enough_ of the "sys_ni_syscall"
+ * entries. Don't panic if you notice that this hasn't
+ * been shrunk every time we add a new system call.
+ */
+
+ .rept NR_syscalls - (.-sys_call_table) / 4
+ .long sys_ni_syscall
+ .endr
+
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
new file mode 100644
index 0000000..ea2b4a9
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -0,0 +1,996 @@
+/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $
+ * linux/arch/cris/kernel/fasttimer.c
+ *
+ * Fast timers for ETRAX FS
+ * This may be useful in other OS than Linux so use 2 space indentation...
+ *
+ * $Log: fasttimer.c,v $
+ * Revision 1.11 2005/01/04 11:15:46 starvik
+ * Don't share timer IRQ.
+ *
+ * Revision 1.10 2004/12/07 09:19:38 starvik
+ * Corrected includes.
+ * Use correct interrupt macros.
+ *
+ * Revision 1.9 2004/05/14 10:18:58 starvik
+ * Export fast_timer_list
+ *
+ * Revision 1.8 2004/05/14 07:58:03 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.7 2003/07/10 12:06:14 starvik
+ * Return IRQ_NONE if irq wasn't handled
+ *
+ * Revision 1.6 2003/07/04 08:27:49 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.5 2003/06/05 10:16:22 johana
+ * New INTR_VECT macros.
+ *
+ * Revision 1.4 2003/06/03 08:49:45 johana
+ * Fixed typo.
+ *
+ * Revision 1.3 2003/06/02 12:51:27 johana
+ * Now compiles.
+ * Commented some include files that probably can be removed.
+ *
+ * Revision 1.2 2003/06/02 12:09:41 johana
+ * Ported to ETRAX FS using the trig interrupt instead of timer1.
+ *
+ * Revision 1.3 2002/12/12 08:26:32 starvik
+ * Don't use C-comments inside CVS comments
+ *
+ * Revision 1.2 2002/12/11 15:42:02 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
+ *
+ * Revision 1.1 2002/11/18 07:58:06 starvik
+ * Fast timers (from Linux 2.4)
+ *
+ * Revision 1.5 2002/10/15 06:21:39 starvik
+ * Added call to init_waitqueue_head
+ *
+ * Revision 1.4 2002/05/28 17:47:59 johana
+ * Added del_fast_timer()
+ *
+ * Revision 1.3 2002/05/28 16:16:07 johana
+ * Handle empty fast_timer_list
+ *
+ * Revision 1.2 2002/05/27 15:38:42 johana
+ * Made it compile without warnings on Linux 2.4.
+ * (includes, wait_queue, PROC_FS and snprintf)
+ *
+ * Revision 1.1 2002/05/27 15:32:25 johana
+ * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
+ *
+ * Revision 1.8 2001/11/27 13:50:40 pkj
+ * Disable interrupts while stopping the timer and while modifying the
+ * list of active timers in timer1_handler() as it may be interrupted
+ * by other interrupts (e.g., the serial interrupt) which may add fast
+ * timers.
+ *
+ * Revision 1.7 2001/11/22 11:50:32 pkj
+ * * Only store information about the last 16 timers.
+ * * proc_fasttimer_read() now uses an allocated buffer, since it
+ * requires more space than just a page even for only writing the
+ * last 16 timers. The buffer is only allocated on request, so
+ * unless /proc/fasttimer is read, it is never allocated.
+ * * Renamed fast_timer_started to fast_timers_started to match
+ * fast_timers_added and fast_timers_expired.
+ * * Some clean-up.
+ *
+ * Revision 1.6 2000/12/13 14:02:08 johana
+ * Removed volatile for fast_timer_list
+ *
+ * Revision 1.5 2000/12/13 13:55:35 johana
+ * Added DEBUG_LOG, added som cli() and cleanup
+ *
+ * Revision 1.4 2000/12/05 13:48:50 johana
+ * Added range check when writing proc file, modified timer int handling
+ *
+ * Revision 1.3 2000/11/23 10:10:20 johana
+ * More debug/logging possibilities.
+ * Moved GET_JIFFIES_USEC() to timex.h and time.c
+ *
+ * Revision 1.2 2000/11/01 13:41:04 johana
+ * Clean up and bugfixes.
+ * Created new do_gettimeofday_fast() that gets a timeval struct
+ * with time based on jiffies and *R_TIMER0_DATA, uses a table
+ * for fast conversion of timer value to microseconds.
+ * (Much faster the standard do_gettimeofday() and we don't really
+ * wan't to use the true time - we wan't the "uptime" so timers don't screw up
+ * when we change the time.
+ * TODO: Add efficient support for continuous timers as well.
+ *
+ * Revision 1.1 2000/10/26 15:49:16 johana
+ * Added fasttimer, highresolution timers.
+ *
+ * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <linux/config.h>
+#include <linux/version.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/fasttimer.h>
+#include <linux/proc_fs.h>
+
+/*
+ * timer0 is running at 100MHz and generating jiffies timer ticks
+ * at 100 or 1000 HZ.
+ * fasttimer gives an API that gives timers that expire "between" the jiffies
+ * giving microsecond resolution (10 ns).
+ * fasttimer uses reg_timer_rw_trig register to get interrupt when
+ * r_time reaches a certain value.
+ */
+
+
+#define DEBUG_LOG_INCLUDED
+#define FAST_TIMER_LOG
+//#define FAST_TIMER_TEST
+
+#define FAST_TIMER_SANITY_CHECKS
+
+#ifdef FAST_TIMER_SANITY_CHECKS
+#define SANITYCHECK(x) x
+static int sanity_failed = 0;
+#else
+#define SANITYCHECK(x)
+#endif
+
+#define D1(x)
+#define D2(x)
+#define DP(x)
+
+#define __INLINE__ inline
+
+static int fast_timer_running = 0;
+static int fast_timers_added = 0;
+static int fast_timers_started = 0;
+static int fast_timers_expired = 0;
+static int fast_timers_deleted = 0;
+static int fast_timer_is_init = 0;
+static int fast_timer_ints = 0;
+
+struct fast_timer *fast_timer_list = NULL;
+
+#ifdef DEBUG_LOG_INCLUDED
+#define DEBUG_LOG_MAX 128
+static const char * debug_log_string[DEBUG_LOG_MAX];
+static unsigned long debug_log_value[DEBUG_LOG_MAX];
+static int debug_log_cnt = 0;
+static int debug_log_cnt_wrapped = 0;
+
+#define DEBUG_LOG(string, value) \
+{ \
+ unsigned long log_flags; \
+ local_irq_save(log_flags); \
+ debug_log_string[debug_log_cnt] = (string); \
+ debug_log_value[debug_log_cnt] = (unsigned long)(value); \
+ if (++debug_log_cnt >= DEBUG_LOG_MAX) \
+ { \
+ debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
+ debug_log_cnt_wrapped = 1; \
+ } \
+ local_irq_restore(log_flags); \
+}
+#else
+#define DEBUG_LOG(string, value)
+#endif
+
+
+#define NUM_TIMER_STATS 16
+#ifdef FAST_TIMER_LOG
+struct fast_timer timer_added_log[NUM_TIMER_STATS];
+struct fast_timer timer_started_log[NUM_TIMER_STATS];
+struct fast_timer timer_expired_log[NUM_TIMER_STATS];
+#endif
+
+int timer_div_settings[NUM_TIMER_STATS];
+int timer_delay_settings[NUM_TIMER_STATS];
+
+
+static void
+timer_trig_handler(void);
+
+
+
+/* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
+void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
+{
+ unsigned long sec = jiffies;
+ unsigned long usec = GET_JIFFIES_USEC();
+
+ usec += (sec % HZ) * (1000000 / HZ);
+ sec = sec / HZ;
+
+ if (usec > 1000000)
+ {
+ usec -= 1000000;
+ sec++;
+ }
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
+{
+ if (t0->tv_sec < t1->tv_sec)
+ {
+ return -1;
+ }
+ else if (t0->tv_sec > t1->tv_sec)
+ {
+ return 1;
+ }
+ if (t0->tv_usec < t1->tv_usec)
+ {
+ return -1;
+ }
+ else if (t0->tv_usec > t1->tv_usec)
+ {
+ return 1;
+ }
+ return 0;
+}
+
+/* Called with ints off */
+void __INLINE__ start_timer_trig(unsigned long delay_us)
+{
+ reg_timer_rw_ack_intr ack_intr = { 0 };
+ reg_timer_rw_intr_mask intr_mask;
+ reg_timer_rw_trig trig;
+ reg_timer_rw_trig_cfg trig_cfg = { 0 };
+ reg_timer_r_time r_time;
+
+ r_time = REG_RD(timer, regi_timer, r_time);
+
+ D1(printk("start_timer_trig : %d us freq: %i div: %i\n",
+ delay_us, freq_index, div));
+ /* Clear trig irq */
+ intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
+ intr_mask.trig = 0;
+ REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
+
+ /* Set timer values */
+ /* r_time is 100MHz (10 ns resolution) */
+ trig = r_time + delay_us*(1000/10);
+
+ timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig;
+ timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
+
+ /* Ack interrupt */
+ ack_intr.trig = 1;
+ REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
+
+ /* Start timer */
+ REG_WR(timer, regi_timer, rw_trig, trig);
+ trig_cfg.tmr = regk_timer_time;
+ REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
+
+ /* Check if we have already passed the trig time */
+ r_time = REG_RD(timer, regi_timer, r_time);
+ if (r_time < trig) {
+ /* No, Enable trig irq */
+ intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
+ intr_mask.trig = 1;
+ REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
+ fast_timers_started++;
+ fast_timer_running = 1;
+ }
+ else
+ {
+ /* We have passed the time, disable trig point, ack intr */
+ trig_cfg.tmr = regk_timer_off;
+ REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
+ REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
+ /* call the int routine directly */
+ timer_trig_handler();
+ }
+
+}
+
+/* In version 1.4 this function takes 27 - 50 us */
+void start_one_shot_timer(struct fast_timer *t,
+ fast_timer_function_type *function,
+ unsigned long data,
+ unsigned long delay_us,
+ const char *name)
+{
+ unsigned long flags;
+ struct fast_timer *tmp;
+
+ D1(printk("sft %s %d us\n", name, delay_us));
+
+ local_irq_save(flags);
+
+ do_gettimeofday_fast(&t->tv_set);
+ tmp = fast_timer_list;
+
+ SANITYCHECK({ /* Check so this is not in the list already... */
+ while (tmp != NULL)
+ {
+ if (tmp == t)
+ {
+ printk("timer name: %s data: 0x%08lX already in list!\n", name, data);
+ sanity_failed++;
+ return;
+ }
+ else
+ {
+ tmp = tmp->next;
+ }
+ }
+ tmp = fast_timer_list;
+ });
+
+ t->delay_us = delay_us;
+ t->function = function;
+ t->data = data;
+ t->name = name;
+
+ t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
+ t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000;
+ if (t->tv_expires.tv_usec > 1000000)
+ {
+ t->tv_expires.tv_usec -= 1000000;
+ t->tv_expires.tv_sec++;
+ }
+#ifdef FAST_TIMER_LOG
+ timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
+#endif
+ fast_timers_added++;
+
+ /* Check if this should timeout before anything else */
+ if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
+ {
+ /* Put first in list and modify the timer value */
+ t->prev = NULL;
+ t->next = fast_timer_list;
+ if (fast_timer_list)
+ {
+ fast_timer_list->prev = t;
+ }
+ fast_timer_list = t;
+#ifdef FAST_TIMER_LOG
+ timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+ start_timer_trig(delay_us);
+ } else {
+ /* Put in correct place in list */
+ while (tmp->next &&
+ timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0)
+ {
+ tmp = tmp->next;
+ }
+ /* Insert t after tmp */
+ t->prev = tmp;
+ t->next = tmp->next;
+ if (tmp->next)
+ {
+ tmp->next->prev = t;
+ }
+ tmp->next = t;
+ }
+
+ D2(printk("start_one_shot_timer: %d us done\n", delay_us));
+
+ local_irq_restore(flags);
+} /* start_one_shot_timer */
+
+static inline int fast_timer_pending (const struct fast_timer * t)
+{
+ return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list);
+}
+
+static inline int detach_fast_timer (struct fast_timer *t)
+{
+ struct fast_timer *next, *prev;
+ if (!fast_timer_pending(t))
+ return 0;
+ next = t->next;
+ prev = t->prev;
+ if (next)
+ next->prev = prev;
+ if (prev)
+ prev->next = next;
+ else
+ fast_timer_list = next;
+ fast_timers_deleted++;
+ return 1;
+}
+
+int del_fast_timer(struct fast_timer * t)
+{
+ unsigned long flags;
+ int ret;
+
+ local_irq_save(flags);
+ ret = detach_fast_timer(t);
+ t->next = t->prev = NULL;
+ local_irq_restore(flags);
+ return ret;
+} /* del_fast_timer */
+
+
+/* Interrupt routines or functions called in interrupt context */
+
+/* Timer interrupt handler for trig interrupts */
+
+static irqreturn_t
+timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ reg_timer_r_masked_intr masked_intr;
+
+ /* Check if the timer interrupt is for us (a trig int) */
+ masked_intr = REG_RD(timer, regi_timer, r_masked_intr);
+ if (!masked_intr.trig)
+ return IRQ_NONE;
+ timer_trig_handler();
+ return IRQ_HANDLED;
+}
+
+static void timer_trig_handler(void)
+{
+ reg_timer_rw_ack_intr ack_intr = { 0 };
+ reg_timer_rw_intr_mask intr_mask;
+ reg_timer_rw_trig_cfg trig_cfg = { 0 };
+ struct fast_timer *t;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* Clear timer trig interrupt */
+ intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
+ intr_mask.trig = 0;
+ REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
+
+ /* First stop timer, then ack interrupt */
+ /* Stop timer */
+ trig_cfg.tmr = regk_timer_off;
+ REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
+
+ /* Ack interrupt */
+ ack_intr.trig = 1;
+ REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
+
+ fast_timer_running = 0;
+ fast_timer_ints++;
+
+ local_irq_restore(flags);
+
+ t = fast_timer_list;
+ while (t)
+ {
+ struct timeval tv;
+
+ /* Has it really expired? */
+ do_gettimeofday_fast(&tv);
+ D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
+
+ if (timeval_cmp(&t->tv_expires, &tv) <= 0)
+ {
+ /* Yes it has expired */
+#ifdef FAST_TIMER_LOG
+ timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t;
+#endif
+ fast_timers_expired++;
+
+ /* Remove this timer before call, since it may reuse the timer */
+ local_irq_save(flags);
+ if (t->prev)
+ {
+ t->prev->next = t->next;
+ }
+ else
+ {
+ fast_timer_list = t->next;
+ }
+ if (t->next)
+ {
+ t->next->prev = t->prev;
+ }
+ t->prev = NULL;
+ t->next = NULL;
+ local_irq_restore(flags);
+
+ if (t->function != NULL)
+ {
+ t->function(t->data);
+ }
+ else
+ {
+ DEBUG_LOG("!trimertrig %i function==NULL!\n", fast_timer_ints);
+ }
+ }
+ else
+ {
+ /* Timer is to early, let's set it again using the normal routines */
+ D1(printk(".\n"));
+ }
+
+ local_irq_save(flags);
+ if ((t = fast_timer_list) != NULL)
+ {
+ /* Start next timer.. */
+ long us;
+ struct timeval tv;
+
+ do_gettimeofday_fast(&tv);
+ us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
+ t->tv_expires.tv_usec - tv.tv_usec);
+ if (us > 0)
+ {
+ if (!fast_timer_running)
+ {
+#ifdef FAST_TIMER_LOG
+ timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+ start_timer_trig(us);
+ }
+ local_irq_restore(flags);
+ break;
+ }
+ else
+ {
+ /* Timer already expired, let's handle it better late than never.
+ * The normal loop handles it
+ */
+ D1(printk("e! %d\n", us));
+ }
+ }
+ local_irq_restore(flags);
+ }
+
+ if (!t)
+ {
+ D1(printk("ttrig stop!\n"));
+ }
+}
+
+static void wake_up_func(unsigned long data)
+{
+#ifdef DECLARE_WAITQUEUE
+ wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data;
+#else
+ struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
+#endif
+ wake_up(sleep_wait_p);
+}
+
+
+/* Useful API */
+
+void schedule_usleep(unsigned long us)
+{
+ struct fast_timer t;
+#ifdef DECLARE_WAITQUEUE
+ wait_queue_head_t sleep_wait;
+ init_waitqueue_head(&sleep_wait);
+ {
+ DECLARE_WAITQUEUE(wait, current);
+#else
+ struct wait_queue *sleep_wait = NULL;
+ struct wait_queue wait = { current, NULL };
+#endif
+
+ D1(printk("schedule_usleep(%d)\n", us));
+ add_wait_queue(&sleep_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
+ "usleep");
+ schedule();
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&sleep_wait, &wait);
+ D1(printk("done schedule_usleep(%d)\n", us));
+#ifdef DECLARE_WAITQUEUE
+ }
+#endif
+}
+
+#ifdef CONFIG_PROC_FS
+static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+ ,int *eof, void *data_unused
+#else
+ ,int unused
+#endif
+ );
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+static struct proc_dir_entry *fasttimer_proc_entry;
+#else
+static struct proc_dir_entry fasttimer_proc_entry =
+{
+ 0, 9, "fasttimer",
+ S_IFREG | S_IRUGO, 1, 0, 0,
+ 0, NULL /* ops -- default to array */,
+ &proc_fasttimer_read /* get_info */,
+};
+#endif
+#endif /* CONFIG_PROC_FS */
+
+#ifdef CONFIG_PROC_FS
+
+/* This value is very much based on testing */
+#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300)
+
+static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+ ,int *eof, void *data_unused
+#else
+ ,int unused
+#endif
+ )
+{
+ unsigned long flags;
+ int i = 0;
+ int num_to_show;
+ struct timeval tv;
+ struct fast_timer *t, *nextt;
+ static char *bigbuf = NULL;
+ static unsigned long used;
+
+ if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
+ {
+ used = 0;
+ bigbuf[0] = '\0';
+ return 0;
+ }
+
+ if (!offset || !used)
+ {
+ do_gettimeofday_fast(&tv);
+
+ used = 0;
+ used += sprintf(bigbuf + used, "Fast timers added: %i\n",
+ fast_timers_added);
+ used += sprintf(bigbuf + used, "Fast timers started: %i\n",
+ fast_timers_started);
+ used += sprintf(bigbuf + used, "Fast timer interrupts: %i\n",
+ fast_timer_ints);
+ used += sprintf(bigbuf + used, "Fast timers expired: %i\n",
+ fast_timers_expired);
+ used += sprintf(bigbuf + used, "Fast timers deleted: %i\n",
+ fast_timers_deleted);
+ used += sprintf(bigbuf + used, "Fast timer running: %s\n",
+ fast_timer_running ? "yes" : "no");
+ used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n",
+ (unsigned long)tv.tv_sec,
+ (unsigned long)tv.tv_usec);
+#ifdef FAST_TIMER_SANITY_CHECKS
+ used += sprintf(bigbuf + used, "Sanity failed: %i\n",
+ sanity_failed);
+#endif
+ used += sprintf(bigbuf + used, "\n");
+
+#ifdef DEBUG_LOG_INCLUDED
+ {
+ int end_i = debug_log_cnt;
+ i = 0;
+
+ if (debug_log_cnt_wrapped)
+ {
+ i = debug_log_cnt;
+ }
+
+ while ((i != end_i || (debug_log_cnt_wrapped && !used)) &&
+ used+100 < BIG_BUF_SIZE)
+ {
+ used += sprintf(bigbuf + used, debug_log_string[i],
+ debug_log_value[i]);
+ i = (i+1) % DEBUG_LOG_MAX;
+ }
+ }
+ used += sprintf(bigbuf + used, "\n");
+#endif
+
+ num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started:
+ NUM_TIMER_STATS);
+ used += sprintf(bigbuf + used, "Timers started: %i\n", fast_timers_started);
+ for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE) ; i++)
+ {
+ int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS;
+
+#if 1 //ndef FAST_TIMER_LOG
+ used += sprintf(bigbuf + used, "div: %i delay: %i"
+ "\n",
+ timer_div_settings[cur],
+ timer_delay_settings[cur]
+ );
+#endif
+#ifdef FAST_TIMER_LOG
+ t = &timer_started_log[cur];
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+ );
+#endif
+ }
+ used += sprintf(bigbuf + used, "\n");
+
+#ifdef FAST_TIMER_LOG
+ num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added:
+ NUM_TIMER_STATS);
+ used += sprintf(bigbuf + used, "Timers added: %i\n", fast_timers_added);
+ for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++)
+ {
+ t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS];
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+ );
+ }
+ used += sprintf(bigbuf + used, "\n");
+
+ num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired:
+ NUM_TIMER_STATS);
+ used += sprintf(bigbuf + used, "Timers expired: %i\n", fast_timers_expired);
+ for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++)
+ {
+ t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS];
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+ );
+ }
+ used += sprintf(bigbuf + used, "\n");
+#endif
+
+ used += sprintf(bigbuf + used, "Active timers:\n");
+ local_irq_save(flags);
+ local_irq_save(flags);
+ t = fast_timer_list;
+ while (t != NULL && (used+100 < BIG_BUF_SIZE))
+ {
+ nextt = t->next;
+ local_irq_restore(flags);
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+/* " func: 0x%08lX" */
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+/* , t->function */
+ );
+ local_irq_disable();
+ if (t->next != nextt)
+ {
+ printk("timer removed!\n");
+ }
+ t = nextt;
+ }
+ local_irq_restore(flags);
+ }
+
+ if (used - offset < len)
+ {
+ len = used - offset;
+ }
+
+ memcpy(buf, bigbuf + offset, len);
+ *start = buf;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+ *eof = 1;
+#endif
+
+ return len;
+}
+#endif /* PROC_FS */
+
+#ifdef FAST_TIMER_TEST
+static volatile unsigned long i = 0;
+static volatile int num_test_timeout = 0;
+static struct fast_timer tr[10];
+static int exp_num[10];
+
+static struct timeval tv_exp[100];
+
+static void test_timeout(unsigned long data)
+{
+ do_gettimeofday_fast(&tv_exp[data]);
+ exp_num[data] = num_test_timeout;
+
+ num_test_timeout++;
+}
+
+static void test_timeout1(unsigned long data)
+{
+ do_gettimeofday_fast(&tv_exp[data]);
+ exp_num[data] = num_test_timeout;
+ if (data < 7)
+ {
+ start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1");
+ i++;
+ }
+ num_test_timeout++;
+}
+
+DP(
+static char buf0[2000];
+static char buf1[2000];
+static char buf2[2000];
+static char buf3[2000];
+static char buf4[2000];
+);
+
+static char buf5[6000];
+static int j_u[1000];
+
+static void fast_timer_test(void)
+{
+ int prev_num;
+ int j;
+
+ struct timeval tv, tv0, tv1, tv2;
+
+ printk("fast_timer_test() start\n");
+ do_gettimeofday_fast(&tv);
+
+ for (j = 0; j < 1000; j++)
+ {
+ j_u[j] = GET_JIFFIES_USEC();
+ }
+ for (j = 0; j < 100; j++)
+ {
+ do_gettimeofday_fast(&tv_exp[j]);
+ }
+ printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
+
+ for (j = 0; j < 1000; j++)
+ {
+ printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]);
+ j += 4;
+ }
+ for (j = 0; j < 100; j++)
+ {
+ printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
+ tv_exp[j].tv_sec,tv_exp[j].tv_usec,
+ tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
+ tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
+ tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
+ tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
+ j += 4;
+ }
+ do_gettimeofday_fast(&tv0);
+ start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0");
+ DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1");
+ DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2");
+ DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3");
+ DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx");
+ DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0));
+ i++;
+ do_gettimeofday_fast(&tv1);
+
+ proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+
+ prev_num = num_test_timeout;
+ while (num_test_timeout < i)
+ {
+ if (num_test_timeout != prev_num)
+ {
+ prev_num = num_test_timeout;
+ }
+ }
+ do_gettimeofday_fast(&tv2);
+ printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec);
+ printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
+ printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec);
+ DP(printk("buf0:\n");
+ printk(buf0);
+ printk("buf1:\n");
+ printk(buf1);
+ printk("buf2:\n");
+ printk(buf2);
+ printk("buf3:\n");
+ printk(buf3);
+ printk("buf4:\n");
+ printk(buf4);
+ );
+ printk("buf5:\n");
+ printk(buf5);
+
+ printk("timers set:\n");
+ for(j = 0; j<i; j++)
+ {
+ struct fast_timer *t = &tr[j];
+ printk("%-10s set: %6is %06ius exp: %6is %06ius "
+ "data: 0x%08X func: 0x%08X\n",
+ t->name,
+ t->tv_set.tv_sec,
+ t->tv_set.tv_usec,
+ t->tv_expires.tv_sec,
+ t->tv_expires.tv_usec,
+ t->data,
+ t->function
+ );
+
+ printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n",
+ t->delay_us,
+ tv_exp[j].tv_sec,
+ tv_exp[j].tv_usec,
+ exp_num[j],
+ (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
+ }
+ proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+ printk("buf5 after all done:\n");
+ printk(buf5);
+ printk("fast_timer_test() done\n");
+}
+#endif
+
+
+void fast_timer_init(void)
+{
+ /* For some reason, request_irq() hangs when called froom time_init() */
+ if (!fast_timer_is_init)
+ {
+ printk("fast_timer_init()\n");
+
+#ifdef CONFIG_PROC_FS
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+ if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
+ fasttimer_proc_entry->read_proc = proc_fasttimer_read;
+#else
+ proc_register_dynamic(&proc_root, &fasttimer_proc_entry);
+#endif
+#endif /* PROC_FS */
+ if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_INTERRUPT,
+ "fast timer int", NULL))
+ {
+ printk("err: timer1 irq\n");
+ }
+ fast_timer_is_init = 1;
+#ifdef FAST_TIMER_TEST
+ printk("do test\n");
+ fast_timer_test();
+#endif
+ }
+}
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
new file mode 100644
index 0000000..3cfe57d
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -0,0 +1,448 @@
+/*
+ * CRISv32 kernel startup code.
+ *
+ * Copyright (C) 2003, Axis Communications AB
+ */
+
+#include <linux/config.h>
+
+#define ASSEMBLER_MACROS_ONLY
+
+/*
+ * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so
+ * -traditional must not be used when assembling this file.
+ */
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/config_defs_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+
+#define CRAMFS_MAGIC 0x28cd3d45
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+ ;; NOTE: R8 and R9 carry information from the decompressor (if the
+ ;; kernel was compressed). They must not be used in the code below
+ ;; until they are read!
+
+ ;; Exported symbols.
+ .global etrax_irv
+ .global romfs_start
+ .global romfs_length
+ .global romfs_in_flash
+ .global swapper_pg_dir
+ .global crisv32_nand_boot
+ .global crisv32_nand_cramfs_offset
+
+ ;; Dummy section to make it bootable with current VCS simulator
+#ifdef CONFIG_ETRAXFS_SIM
+ .section ".boot", "ax"
+ ba tstart
+ nop
+#endif
+
+ .text
+tstart:
+ ;; This is the entry point of the kernel. The CPU is currently in
+ ;; supervisor mode.
+ ;;
+ ;; 0x00000000 if flash.
+ ;; 0x40004000 if DRAM.
+ ;;
+ di
+
+ ;; Start clocks for used blocks.
+ move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
+ move.d [$r1], $r0
+ or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \
+ REG_STATE(config, rw_clk_ctrl, bif, yes) | \
+ REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
+ move.d $r0, [$r1]
+
+ ;; Set up waitstates etc
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0
+ move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1
+ move.d $r1, [$r0]
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0
+ move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1
+ move.d $r1, [$r0]
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0
+ move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1
+ move.d $r1, [$r0]
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
+ move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
+ move.d $r1, [$r0]
+
+#ifdef CONFIG_ETRAXFS_SIM
+ ;; Set up minimal flash waitstates
+ move.d 0, $r10
+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
+ move.d $r10, [$r11]
+#endif
+
+ ;; Setup and enable the MMU. Use same configuration for both the data
+ ;; and the instruction MMU.
+ ;;
+ ;; Note; 3 cycles is needed for a bank-select to take effect. Further;
+ ;; bank 1 is the instruction MMU, bank 2 is the data MMU.
+#ifndef CONFIG_ETRAXFS_SIM
+ move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
+#else
+ ;; Map the virtual DRAM to the RW eprom area at address 0.
+ ;; Also map 0xa for the hook calls,
+ move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \
+ | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
+#endif
+
+ ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
+ move.d REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 4) \
+ | REG_FIELD(mmu, rw_mm_kbase_lo, base_0, 0), $r1
+
+ ;; Enable certain page protections and setup linear mapping
+ ;; for f,e,c,b,4,0.
+#ifndef CONFIG_ETRAXFS_SIM
+ move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
+ | REG_STATE(mmu, rw_mm_cfg, acc, on) \
+ | REG_STATE(mmu, rw_mm_cfg, ex, on) \
+ | REG_STATE(mmu, rw_mm_cfg, inv, on) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_f, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_e, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_d, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_a, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_9, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_8, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_7, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_6, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_5, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_4, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_3, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#else
+ move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
+ | REG_STATE(mmu, rw_mm_cfg, acc, on) \
+ | REG_STATE(mmu, rw_mm_cfg, ex, on) \
+ | REG_STATE(mmu, rw_mm_cfg, inv, on) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_f, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_e, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_d, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_c, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_b, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_a, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_9, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_8, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_7, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_6, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_5, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_4, linear) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_3, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \
+ | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#endif
+
+ ;; Update instruction MMU.
+ move 1, $srs
+ nop
+ nop
+ nop
+ move $r0, $s2 ; kbase_hi.
+ move $r1, $s1 ; kbase_lo.
+ move $r2, $s0 ; mm_cfg, virtual memory configuration.
+
+ ;; Update data MMU.
+ move 2, $srs
+ nop
+ nop
+ nop
+ move $r0, $s2 ; kbase_hi.
+ move $r1, $s1 ; kbase_lo
+ move $r2, $s0 ; mm_cfg, virtual memory configuration.
+
+ ;; Enable data and instruction MMU.
+ move 0, $srs
+ moveq 0xf, $r0 ; IMMU, DMMU, DCache, Icache on
+ nop
+ nop
+ nop
+ move $r0, $s0
+ nop
+ nop
+ nop
+
+#ifdef CONFIG_SMP
+ ;; Read CPU ID
+ move 0, $srs
+ nop
+ nop
+ nop
+ move $s10, $r0
+ cmpq 0, $r0
+ beq master_cpu
+ nop
+slave_cpu:
+ ; A slave waits for cpu_now_booting to be equal to CPU ID.
+ move.d cpu_now_booting, $r1
+slave_wait:
+ cmp.d [$r1], $r0
+ bne slave_wait
+ nop
+ ; Time to boot-up. Get stack location provided by master CPU.
+ move.d smp_init_current_idle_thread, $r1
+ move.d [$r1], $sp
+ add.d 8192, $sp
+ move.d ebp_start, $r0 ; Defined in linker-script.
+ move $r0, $ebp
+ jsr smp_callin
+ nop
+master_cpu:
+#endif
+#ifndef CONFIG_ETRAXFS_SIM
+ ;; Check if starting from DRAM or flash.
+ lapcq ., $r0
+ and.d 0x7fffffff, $r0 ; Mask off the non-cache bit.
+ cmp.d 0x10000, $r0 ; Arbitrary, something above this code.
+ blo _inflash0
+ nop
+#endif
+
+ jump _inram ; Jump to cached RAM.
+ nop
+
+ ;; Jumpgate.
+_inflash0:
+ jump _inflash
+ nop
+
+ ;; Put the following in a section so that storage for it can be
+ ;; reclaimed after init is finished.
+ .section ".init.text", "ax"
+
+_inflash:
+
+ ;; Initialize DRAM.
+ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
+ beq _dram_initialized
+ nop
+
+#include "../lib/dram_init.S"
+
+_dram_initialized:
+ ;; Copy the text and data section to DRAM. This depends on that the
+ ;; variables used below are correctly set up by the linker script.
+ ;; The calculated value stored in R4 is used below.
+ moveq 0, $r0 ; Source.
+ move.d text_start, $r1 ; Destination.
+ move.d __vmlinux_end, $r2
+ move.d $r2, $r4
+ sub.d $r1, $r4
+1: move.w [$r0+], $r3
+ move.w $r3, [$r1+]
+ cmp.d $r2, $r1
+ blo 1b
+ nop
+
+ ;; Keep CRAMFS in flash.
+ moveq 0, $r0
+ move.d romfs_length, $r1
+ move.d $r0, [$r1]
+ move.d [$r4], $r0 ; cramfs_super.magic
+ cmp.d CRAMFS_MAGIC, $r0
+ bne 1f
+ nop
+
+ addoq +4, $r4, $acr
+ move.d [$acr], $r0
+ move.d romfs_length, $r1
+ move.d $r0, [$r1]
+ add.d 0xf0000000, $r4 ; Add cached flash start in virtual memory.
+ move.d romfs_start, $r1
+ move.d $r4, [$r1]
+1: moveq 1, $r0
+ move.d romfs_in_flash, $r1
+ move.d $r0, [$r1]
+
+ jump _start_it ; Jump to cached code.
+ nop
+
+_inram:
+ ;; Check if booting from NAND flash (in that case we just remember the offset
+ ;; into the flash where cramfs should be).
+ move.d REG_ADDR(config, regi_config, r_bootsel), $r0
+ move.d [$r0], $r0
+ and.d REG_MASK(config, r_bootsel, boot_mode), $r0
+ cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
+ bne move_cramfs
+ moveq 1,$r0
+ move.d crisv32_nand_boot, $r1
+ move.d $r0, [$r1]
+ move.d crisv32_nand_cramfs_offset, $r1
+ move.d $r9, [$r1]
+ moveq 1, $r0
+ move.d romfs_in_flash, $r1
+ move.d $r0, [$r1]
+ jump _start_it
+ nop
+
+move_cramfs:
+ ;; Move the cramfs after BSS.
+ moveq 0, $r0
+ move.d romfs_length, $r1
+ move.d $r0, [$r1]
+
+#ifndef CONFIG_ETRAXFS_SIM
+ ;; The kernel could have been unpacked to DRAM by the loader, but
+ ;; the cramfs image could still be inte the flash immediately
+ ;; following the compressed kernel image. The loaded passes the address
+ ;; of the bute succeeding the last compressed byte in the flash in
+ ;; register R9 when starting the kernel.
+ cmp.d 0x0ffffff8, $r9
+ bhs _no_romfs_in_flash ; R9 points outside the flash area.
+ nop
+#else
+ ba _no_romfs_in_flash
+ nop
+#endif
+ move.d [$r9], $r0 ; cramfs_super.magic
+ cmp.d CRAMFS_MAGIC, $r0
+ bne _no_romfs_in_flash
+ nop
+
+ addoq +4, $r9, $acr
+ move.d [$acr], $r0
+ move.d romfs_length, $r1
+ move.d $r0, [$r1]
+ add.d 0xf0000000, $r9 ; Add cached flash start in virtual memory.
+ move.d romfs_start, $r1
+ move.d $r9, [$r1]
+ moveq 1, $r0
+ move.d romfs_in_flash, $r1
+ move.d $r0, [$r1]
+
+ jump _start_it ; Jump to cached code.
+ nop
+
+_no_romfs_in_flash:
+ ;; Look for cramfs.
+#ifndef CONFIG_ETRAXFS_SIM
+ move.d __vmlinux_end, $r0
+#else
+ move.d __end, $r0
+#endif
+ move.d [$r0], $r1
+ cmp.d CRAMFS_MAGIC, $r1
+ bne 2f
+ nop
+
+ addoq +4, $r0, $acr
+ move.d [$acr], $r2
+ move.d _end, $r1
+ move.d romfs_start, $r3
+ move.d $r1, [$r3]
+ move.d romfs_length, $r3
+ move.d $r2, [$r3]
+
+#ifndef CONFIG_ETRAXFS_SIM
+ add.d $r2, $r0
+ add.d $r2, $r1
+
+ lsrq 1, $r2 ; Size is in bytes, we copy words.
+ addq 1, $r2
+1:
+ move.w [$r0], $r3
+ move.w $r3, [$r1]
+ subq 2, $r0
+ subq 2, $r1
+ subq 1, $r2
+ bne 1b
+ nop
+#endif
+
+2:
+ moveq 0, $r0
+ move.d romfs_in_flash, $r1
+ move.d $r0, [$r1]
+
+ jump _start_it ; Jump to cached code.
+ nop
+
+_start_it:
+
+ ;; Check if kernel command line is supplied
+ cmp.d COMMAND_LINE_MAGIC, $r10
+ bne no_command_line
+ nop
+
+ move.d 256, $r13
+ move.d cris_command_line, $r10
+ or.d 0x80000000, $r11 ; Make it virtual
+1:
+ move.b [$r11+], $r12
+ move.b $r12, [$r10+]
+ subq 1, $r13
+ bne 1b
+ nop
+
+no_command_line:
+
+ ;; The kernel stack contains a task structure for each task. This
+ ;; the initial kernel stack is in the same page as the init_task,
+ ;; but starts at the top of the page, i.e. + 8192 bytes.
+ move.d init_thread_union + 8192, $sp
+ move.d ebp_start, $r0 ; Defined in linker-script.
+ move $r0, $ebp
+ move.d etrax_irv, $r1 ; Set the exception base register and pointer.
+ move.d $r0, [$r1]
+
+#ifndef CONFIG_ETRAXFS_SIM
+ ;; Clear the BSS region from _bss_start to _end.
+ move.d __bss_start, $r0
+ move.d _end, $r1
+1: clear.d [$r0+]
+ cmp.d $r1, $r0
+ blo 1b
+ nop
+#endif
+
+#ifdef CONFIG_ETRAXFS_SIM
+ /* Set the watchdog timeout to something big. Will be removed when */
+ /* watchdog can be disabled with command line option */
+ move.d 0x7fffffff, $r10
+ jsr CPU_WATCHDOG_TIMEOUT
+ nop
+#endif
+
+ ; Initialize registers to increase determinism
+ move.d __bss_start, $r0
+ movem [$r0], $r13
+
+ jump start_kernel ; Jump to start_kernel() in init/main.c.
+ nop
+
+ .data
+etrax_irv:
+ .dword 0
+romfs_start:
+ .dword 0
+romfs_length:
+ .dword 0
+romfs_in_flash:
+ .dword 0
+crisv32_nand_boot:
+ .dword 0
+crisv32_nand_cramfs_offset:
+ .dword 0
+
+swapper_pg_dir = 0xc0002000
+
+ .section ".init.data", "aw"
+
+#include "../lib/hw_settings.S"
diff --git a/arch/cris/arch-v32/kernel/io.c b/arch/cris/arch-v32/kernel/io.c
new file mode 100644
index 0000000..6bc9f26
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/io.c
@@ -0,0 +1,154 @@
+/*
+ * Helper functions for I/O pins.
+ *
+ * Copyright (c) 2004 Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/hwregs/gio_defs.h>
+
+struct crisv32_ioport crisv32_ioports[] =
+{
+ {
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_oe),
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_dout),
+ (unsigned long*)REG_ADDR(gio, regi_gio, r_pa_din),
+ 8
+ },
+ {
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_oe),
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_dout),
+ (unsigned long*)REG_ADDR(gio, regi_gio, r_pb_din),
+ 18
+ },
+ {
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_oe),
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_dout),
+ (unsigned long*)REG_ADDR(gio, regi_gio, r_pc_din),
+ 18
+ },
+ {
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_oe),
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_dout),
+ (unsigned long*)REG_ADDR(gio, regi_gio, r_pd_din),
+ 18
+ },
+ {
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_oe),
+ (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout),
+ (unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din),
+ 18
+ }
+};
+
+#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+
+struct crisv32_iopin crisv32_led1_green;
+struct crisv32_iopin crisv32_led1_red;
+struct crisv32_iopin crisv32_led2_green;
+struct crisv32_iopin crisv32_led2_red;
+struct crisv32_iopin crisv32_led3_green;
+struct crisv32_iopin crisv32_led3_red;
+
+/* Dummy port used when green LED and red LED is on the same bit */
+static unsigned long io_dummy;
+static struct crisv32_ioport dummy_port =
+{
+ &io_dummy,
+ &io_dummy,
+ &io_dummy,
+ 18
+};
+static struct crisv32_iopin dummy_led =
+{
+ &dummy_port,
+ 0
+};
+
+static int __init crisv32_io_init(void)
+{
+ int ret = 0;
+ /* Initialize LEDs */
+ ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G);
+ ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R);
+ ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G);
+ ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R);
+ ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G);
+ ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R);
+ crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out);
+ crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out);
+ crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
+ crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
+ crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
+ crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
+
+ if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R))
+ crisv32_led1_red = dummy_led;
+ if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R))
+ crisv32_led2_red = dummy_led;
+
+ return ret;
+}
+
+__initcall(crisv32_io_init);
+
+int crisv32_io_get(struct crisv32_iopin* iopin,
+ unsigned int port, unsigned int pin)
+{
+ if (port > NBR_OF_PORTS)
+ return -EINVAL;
+ if (port > crisv32_ioports[port].pin_count)
+ return -EINVAL;
+
+ iopin->bit = 1 << pin;
+ iopin->port = &crisv32_ioports[port];
+
+ if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
+ return -EIO;
+
+ return 0;
+}
+
+int crisv32_io_get_name(struct crisv32_iopin* iopin,
+ char* name)
+{
+ int port;
+ int pin;
+
+ if (toupper(*name) == 'P')
+ name++;
+
+ if (toupper(*name) < 'A' || toupper(*name) > 'E')
+ return -EINVAL;
+
+ port = toupper(*name) - 'A';
+ name++;
+ pin = simple_strtoul(name, NULL, 10);
+
+ if (pin < 0 || pin > crisv32_ioports[port].pin_count)
+ return -EINVAL;
+
+ iopin->bit = 1 << pin;
+ iopin->port = &crisv32_ioports[port];
+
+ if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
+ return -EIO;
+
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+/* PCI I/O access stuff */
+struct cris_io_operations* cris_iops = NULL;
+EXPORT_SYMBOL(cris_iops);
+#endif
+
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
new file mode 100644
index 0000000..c78cc26
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+#define CPU_FIXED -1
+
+/* IRQ masks (refer to comment for crisv32_do_multiple) */
+#define TIMER_MASK (1 << (TIMER_INTR_VECT - FIRST_IRQ))
+#ifdef CONFIG_ETRAX_KGDB
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+#define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ))
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+#define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ))
+#elif defined(CONFIG_ETRAX_KGB_PORT2)
+#define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ))
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+#define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ))
+#endif
+#endif
+
+DEFINE_SPINLOCK(irq_lock);
+
+struct cris_irq_allocation
+{
+ int cpu; /* The CPU to which the IRQ is currently allocated. */
+ cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */
+};
+
+struct cris_irq_allocation irq_allocations[NR_IRQS] =
+ {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}};
+
+static unsigned long irq_regs[NR_CPUS] =
+{
+ regi_irq,
+#ifdef CONFIG_SMP
+ regi_irq2,
+#endif
+};
+
+unsigned long cpu_irq_counters[NR_CPUS];
+unsigned long irq_counters[NR_REAL_IRQS];
+
+/* From irq.c. */
+extern void weird_irq(void);
+
+/* From entry.S. */
+extern void system_call(void);
+extern void nmi_interrupt(void);
+extern void multiple_interrupt(void);
+extern void gdb_handle_exception(void);
+extern void i_mmu_refill(void);
+extern void i_mmu_invalid(void);
+extern void i_mmu_access(void);
+extern void i_mmu_execute(void);
+extern void d_mmu_refill(void);
+extern void d_mmu_invalid(void);
+extern void d_mmu_access(void);
+extern void d_mmu_write(void);
+
+/* From kgdb.c. */
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
+/*
+ * Build the IRQ handler stubs using macros from irq.h. First argument is the
+ * IRQ number, the second argument is the corresponding bit in
+ * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h.
+ */
+BUILD_IRQ(0x31, (1 << 0)) /* memarb */
+BUILD_IRQ(0x32, (1 << 1)) /* gen_io */
+BUILD_IRQ(0x33, (1 << 2)) /* iop0 */
+BUILD_IRQ(0x34, (1 << 3)) /* iop1 */
+BUILD_IRQ(0x35, (1 << 4)) /* iop2 */
+BUILD_IRQ(0x36, (1 << 5)) /* iop3 */
+BUILD_IRQ(0x37, (1 << 6)) /* dma0 */
+BUILD_IRQ(0x38, (1 << 7)) /* dma1 */
+BUILD_IRQ(0x39, (1 << 8)) /* dma2 */
+BUILD_IRQ(0x3a, (1 << 9)) /* dma3 */
+BUILD_IRQ(0x3b, (1 << 10)) /* dma4 */
+BUILD_IRQ(0x3c, (1 << 11)) /* dma5 */
+BUILD_IRQ(0x3d, (1 << 12)) /* dma6 */
+BUILD_IRQ(0x3e, (1 << 13)) /* dma7 */
+BUILD_IRQ(0x3f, (1 << 14)) /* dma8 */
+BUILD_IRQ(0x40, (1 << 15)) /* dma9 */
+BUILD_IRQ(0x41, (1 << 16)) /* ata */
+BUILD_IRQ(0x42, (1 << 17)) /* sser0 */
+BUILD_IRQ(0x43, (1 << 18)) /* sser1 */
+BUILD_IRQ(0x44, (1 << 19)) /* ser0 */
+BUILD_IRQ(0x45, (1 << 20)) /* ser1 */
+BUILD_IRQ(0x46, (1 << 21)) /* ser2 */
+BUILD_IRQ(0x47, (1 << 22)) /* ser3 */
+BUILD_IRQ(0x48, (1 << 23))
+BUILD_IRQ(0x49, (1 << 24)) /* eth0 */
+BUILD_IRQ(0x4a, (1 << 25)) /* eth1 */
+BUILD_TIMER_IRQ(0x4b, (1 << 26))/* timer */
+BUILD_IRQ(0x4c, (1 << 27)) /* bif_arb */
+BUILD_IRQ(0x4d, (1 << 28)) /* bif_dma */
+BUILD_IRQ(0x4e, (1 << 29)) /* ext */
+BUILD_IRQ(0x4f, (1 << 29)) /* ipi */
+
+/* Pointers to the low-level handlers. */
+static void (*interrupt[NR_IRQS])(void) = {
+ IRQ0x31_interrupt, IRQ0x32_interrupt, IRQ0x33_interrupt,
+ IRQ0x34_interrupt, IRQ0x35_interrupt, IRQ0x36_interrupt,
+ IRQ0x37_interrupt, IRQ0x38_interrupt, IRQ0x39_interrupt,
+ IRQ0x3a_interrupt, IRQ0x3b_interrupt, IRQ0x3c_interrupt,
+ IRQ0x3d_interrupt, IRQ0x3e_interrupt, IRQ0x3f_interrupt,
+ IRQ0x40_interrupt, IRQ0x41_interrupt, IRQ0x42_interrupt,
+ IRQ0x43_interrupt, IRQ0x44_interrupt, IRQ0x45_interrupt,
+ IRQ0x46_interrupt, IRQ0x47_interrupt, IRQ0x48_interrupt,
+ IRQ0x49_interrupt, IRQ0x4a_interrupt, IRQ0x4b_interrupt,
+ IRQ0x4c_interrupt, IRQ0x4d_interrupt, IRQ0x4e_interrupt,
+ IRQ0x4f_interrupt
+};
+
+void
+block_irq(int irq, int cpu)
+{
+ int intr_mask;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+
+ /* Remember; 1 let thru, 0 block. */
+ intr_mask &= ~(1 << (irq - FIRST_IRQ));
+
+ REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+void
+unblock_irq(int irq, int cpu)
+{
+ int intr_mask;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+
+ /* Remember; 1 let thru, 0 block. */
+ intr_mask |= (1 << (irq - FIRST_IRQ));
+
+ REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+/* Find out which CPU the irq should be allocated to. */
+static int irq_cpu(int irq)
+{
+ int cpu;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irq_lock, flags);
+ cpu = irq_allocations[irq - FIRST_IRQ].cpu;
+
+ /* Fixed interrupts stay on the local CPU. */
+ if (cpu == CPU_FIXED)
+ {
+ spin_unlock_irqrestore(&irq_lock, flags);
+ return smp_processor_id();
+ }
+
+
+ /* Let the interrupt stay if possible */
+ if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask))
+ goto out;
+
+ /* IRQ must be moved to another CPU. */
+ cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask);
+ irq_allocations[irq - FIRST_IRQ].cpu = cpu;
+out:
+ spin_unlock_irqrestore(&irq_lock, flags);
+ return cpu;
+}
+
+void
+mask_irq(int irq)
+{
+ int cpu;
+
+ for (cpu = 0; cpu < NR_CPUS; cpu++)
+ block_irq(irq, cpu);
+}
+
+void
+unmask_irq(int irq)
+{
+ unblock_irq(irq, irq_cpu(irq));
+}
+
+
+static unsigned int startup_crisv32_irq(unsigned int irq)
+{
+ unmask_irq(irq);
+ return 0;
+}
+
+static void shutdown_crisv32_irq(unsigned int irq)
+{
+ mask_irq(irq);
+}
+
+static void enable_crisv32_irq(unsigned int irq)
+{
+ unmask_irq(irq);
+}
+
+static void disable_crisv32_irq(unsigned int irq)
+{
+ mask_irq(irq);
+}
+
+static void ack_crisv32_irq(unsigned int irq)
+{
+}
+
+static void end_crisv32_irq(unsigned int irq)
+{
+}
+
+void set_affinity_crisv32_irq(unsigned int irq, cpumask_t dest)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&irq_lock, flags);
+ irq_allocations[irq - FIRST_IRQ].mask = dest;
+ spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static struct hw_interrupt_type crisv32_irq_type = {
+ .typename = "CRISv32",
+ .startup = startup_crisv32_irq,
+ .shutdown = shutdown_crisv32_irq,
+ .enable = enable_crisv32_irq,
+ .disable = disable_crisv32_irq,
+ .ack = ack_crisv32_irq,
+ .end = end_crisv32_irq,
+ .set_affinity = set_affinity_crisv32_irq
+};
+
+void
+set_exception_vector(int n, irqvectptr addr)
+{
+ etrax_irv->v[n] = (irqvectptr) addr;
+}
+
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+void
+crisv32_do_IRQ(int irq, int block, struct pt_regs* regs)
+{
+ /* Interrupts that may not be moved to another CPU and
+ * are SA_INTERRUPT may skip blocking. This is currently
+ * only valid for the timer IRQ and the IPI and is used
+ * for the timer interrupt to avoid watchdog starvation.
+ */
+ if (!block) {
+ do_IRQ(irq, regs);
+ return;
+ }
+
+ block_irq(irq, smp_processor_id());
+ do_IRQ(irq, regs);
+
+ unblock_irq(irq, irq_cpu(irq));
+}
+
+/* If multiple interrupts occur simultaneously we get a multiple
+ * interrupt from the CPU and software has to sort out which
+ * interrupts that happened. There are two special cases here:
+ *
+ * 1. Timer interrupts may never be blocked because of the
+ * watchdog (refer to comment in include/asr/arch/irq.h)
+ * 2. GDB serial port IRQs are unhandled here and will be handled
+ * as a single IRQ when it strikes again because the GDB
+ * stubb wants to save the registers in its own fashion.
+ */
+void
+crisv32_do_multiple(struct pt_regs* regs)
+{
+ int cpu;
+ int mask;
+ int masked;
+ int bit;
+
+ cpu = smp_processor_id();
+
+ /* An extra irq_enter here to prevent softIRQs to run after
+ * each do_IRQ. This will decrease the interrupt latency.
+ */
+ irq_enter();
+
+ /* Get which IRQs that happend. */
+ masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect);
+
+ /* Calculate new IRQ mask with these IRQs disabled. */
+ mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+ mask &= ~masked;
+
+ /* Timer IRQ is never masked */
+ if (masked & TIMER_MASK)
+ mask |= TIMER_MASK;
+
+ /* Block all the IRQs */
+ REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask);
+
+ /* Check for timer IRQ and handle it special. */
+ if (masked & TIMER_MASK) {
+ masked &= ~TIMER_MASK;
+ do_IRQ(TIMER_INTR_VECT, regs);
+ }
+
+#ifdef IGNORE_MASK
+ /* Remove IRQs that can't be handled as multiple. */
+ masked &= ~IGNORE_MASK;
+#endif
+
+ /* Handle the rest of the IRQs. */
+ for (bit = 0; bit < 32; bit++)
+ {
+ if (masked & (1 << bit))
+ do_IRQ(bit + FIRST_IRQ, regs);
+ }
+
+ /* Unblock all the IRQs. */
+ mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+ mask |= masked;
+ REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask);
+
+ /* This irq_exit() will trigger the soft IRQs. */
+ irq_exit();
+}
+
+/*
+ * This is called by start_kernel. It fixes the IRQ masks and setup the
+ * interrupt vector table to point to bad_interrupt pointers.
+ */
+void __init
+init_IRQ(void)
+{
+ int i;
+ int j;
+ reg_intr_vect_rw_mask vect_mask = {0};
+
+ /* Clear all interrupts masks. */
+ REG_WR(intr_vect, regi_irq, rw_mask, vect_mask);
+
+ for (i = 0; i < 256; i++)
+ etrax_irv->v[i] = weird_irq;
+
+ /* Point all IRQ's to bad handlers. */
+ for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) {
+ irq_desc[j].handler = &crisv32_irq_type;
+ set_exception_vector(i, interrupt[j]);
+ }
+
+ /* Mark Timer and IPI IRQs as CPU local */
+ irq_allocations[TIMER_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
+ irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU;
+ irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
+ irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU;
+
+ set_exception_vector(0x00, nmi_interrupt);
+ set_exception_vector(0x30, multiple_interrupt);
+
+ /* Set up handler for various MMU bus faults. */
+ set_exception_vector(0x04, i_mmu_refill);
+ set_exception_vector(0x05, i_mmu_invalid);
+ set_exception_vector(0x06, i_mmu_access);
+ set_exception_vector(0x07, i_mmu_execute);
+ set_exception_vector(0x08, d_mmu_refill);
+ set_exception_vector(0x09, d_mmu_invalid);
+ set_exception_vector(0x0a, d_mmu_access);
+ set_exception_vector(0x0b, d_mmu_write);
+
+ /* The system-call trap is reached by "break 13". */
+ set_exception_vector(0x1d, system_call);
+
+ /* Exception handlers for debugging, both user-mode and kernel-mode. */
+
+ /* Break 8. */
+ set_exception_vector(0x18, gdb_handle_exception);
+ /* Hardware single step. */
+ set_exception_vector(0x3, gdb_handle_exception);
+ /* Hardware breakpoint. */
+ set_exception_vector(0xc, gdb_handle_exception);
+
+#ifdef CONFIG_ETRAX_KGDB
+ kgdb_init();
+ /* Everything is set up; now trap the kernel. */
+ breakpoint();
+#endif
+}
+
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
new file mode 100644
index 0000000..480e563
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -0,0 +1,1660 @@
+/*
+ * arch/cris/arch-v32/kernel/kgdb.c
+ *
+ * CRIS v32 version by Orjan Friberg, Axis Communications AB.
+ *
+ * S390 version
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ */
+
+/* FIXME: Check the documentation. */
+
+/*
+ * kgdb usage notes:
+ * -----------------
+ *
+ * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be
+ * built with different gcc flags: "-g" is added to get debug infos, and
+ * "-fomit-frame-pointer" is omitted to make debugging easier. Since the
+ * resulting kernel will be quite big (approx. > 7 MB), it will be stripped
+ * before compresion. Such a kernel will behave just as usually, except if
+ * given a "debug=<device>" command line option. (Only serial devices are
+ * allowed for <device>, i.e. no printers or the like; possible values are
+ * machine depedend and are the same as for the usual debug device, the one
+ * for logging kernel messages.) If that option is given and the device can be
+ * initialized, the kernel will connect to the remote gdb in trap_init(). The
+ * serial parameters are fixed to 8N1 and 115200 bps, for easyness of
+ * implementation.
+ *
+ * To start a debugging session, start that gdb with the debugging kernel
+ * image (the one with the symbols, vmlinux.debug) named on the command line.
+ * This file will be used by gdb to get symbol and debugging infos about the
+ * kernel. Next, select remote debug mode by
+ * target remote <device>
+ * where <device> is the name of the serial device over which the debugged
+ * machine is connected. Maybe you have to adjust the baud rate by
+ * set remotebaud <rate>
+ * or also other parameters with stty:
+ * shell stty ... </dev/...
+ * If the kernel to debug has already booted, it waited for gdb and now
+ * connects, and you'll see a breakpoint being reported. If the kernel isn't
+ * running yet, start it now. The order of gdb and the kernel doesn't matter.
+ * Another thing worth knowing about in the getting-started phase is how to
+ * debug the remote protocol itself. This is activated with
+ * set remotedebug 1
+ * gdb will then print out each packet sent or received. You'll also get some
+ * messages about the gdb stub on the console of the debugged machine.
+ *
+ * If all that works, you can use lots of the usual debugging techniques on
+ * the kernel, e.g. inspecting and changing variables/memory, setting
+ * breakpoints, single stepping and so on. It's also possible to interrupt the
+ * debugged kernel by pressing C-c in gdb. Have fun! :-)
+ *
+ * The gdb stub is entered (and thus the remote gdb gets control) in the
+ * following situations:
+ *
+ * - If breakpoint() is called. This is just after kgdb initialization, or if
+ * a breakpoint() call has been put somewhere into the kernel source.
+ * (Breakpoints can of course also be set the usual way in gdb.)
+ * In eLinux, we call breakpoint() in init/main.c after IRQ initialization.
+ *
+ * - If there is a kernel exception, i.e. bad_super_trap() or die_if_kernel()
+ * are entered. All the CPU exceptions are mapped to (more or less..., see
+ * the hard_trap_info array below) appropriate signal, which are reported
+ * to gdb. die_if_kernel() is usually called after some kind of access
+ * error and thus is reported as SIGSEGV.
+ *
+ * - When panic() is called. This is reported as SIGABRT.
+ *
+ * - If C-c is received over the serial line, which is treated as
+ * SIGINT.
+ *
+ * Of course, all these signals are just faked for gdb, since there is no
+ * signal concept as such for the kernel. It also isn't possible --obviously--
+ * to set signal handlers from inside gdb, or restart the kernel with a
+ * signal.
+ *
+ * Current limitations:
+ *
+ * - While the kernel is stopped, interrupts are disabled for safety reasons
+ * (i.e., variables not changing magically or the like). But this also
+ * means that the clock isn't running anymore, and that interrupts from the
+ * hardware may get lost/not be served in time. This can cause some device
+ * errors...
+ *
+ * - When single-stepping, only one instruction of the current thread is
+ * executed, but interrupts are allowed for that time and will be serviced
+ * if pending. Be prepared for that.
+ *
+ * - All debugging happens in kernel virtual address space. There's no way to
+ * access physical memory not mapped in kernel space, or to access user
+ * space. A way to work around this is using get_user_long & Co. in gdb
+ * expressions, but only for the current process.
+ *
+ * - Interrupting the kernel only works if interrupts are currently allowed,
+ * and the interrupt of the serial line isn't blocked by some other means
+ * (IPL too high, disabled, ...)
+ *
+ * - The gdb stub is currently not reentrant, i.e. errors that happen therein
+ * (e.g. accessing invalid memory) may not be caught correctly. This could
+ * be removed in future by introducing a stack of struct registers.
+ *
+ */
+
+/*
+ * To enable debugger support, two things need to happen. One, a
+ * call to kgdb_init() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint().
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
+ * baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ */
+
+
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/linkage.h>
+#include <linux/reboot.h>
+
+#include <asm/setup.h>
+#include <asm/ptrace.h>
+
+#include <asm/irq.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/arch/hwregs/ser_defs.h>
+
+/* From entry.S. */
+extern void gdb_handle_exception(void);
+/* From kgdb_asm.S. */
+extern void kgdb_handle_exception(void);
+
+static int kgdb_started = 0;
+
+/********************************* Register image ****************************/
+
+typedef
+struct register_image
+{
+ /* Offset */
+ unsigned int r0; /* 0x00 */
+ unsigned int r1; /* 0x04 */
+ unsigned int r2; /* 0x08 */
+ unsigned int r3; /* 0x0C */
+ unsigned int r4; /* 0x10 */
+ unsigned int r5; /* 0x14 */
+ unsigned int r6; /* 0x18 */
+ unsigned int r7; /* 0x1C */
+ unsigned int r8; /* 0x20; Frame pointer (if any) */
+ unsigned int r9; /* 0x24 */
+ unsigned int r10; /* 0x28 */
+ unsigned int r11; /* 0x2C */
+ unsigned int r12; /* 0x30 */
+ unsigned int r13; /* 0x34 */
+ unsigned int sp; /* 0x38; R14, Stack pointer */
+ unsigned int acr; /* 0x3C; R15, Address calculation register. */
+
+ unsigned char bz; /* 0x40; P0, 8-bit zero register */
+ unsigned char vr; /* 0x41; P1, Version register (8-bit) */
+ unsigned int pid; /* 0x42; P2, Process ID */
+ unsigned char srs; /* 0x46; P3, Support register select (8-bit) */
+ unsigned short wz; /* 0x47; P4, 16-bit zero register */
+ unsigned int exs; /* 0x49; P5, Exception status */
+ unsigned int eda; /* 0x4D; P6, Exception data address */
+ unsigned int mof; /* 0x51; P7, Multiply overflow register */
+ unsigned int dz; /* 0x55; P8, 32-bit zero register */
+ unsigned int ebp; /* 0x59; P9, Exception base pointer */
+ unsigned int erp; /* 0x5D; P10, Exception return pointer. Contains the PC we are interested in. */
+ unsigned int srp; /* 0x61; P11, Subroutine return pointer */
+ unsigned int nrp; /* 0x65; P12, NMI return pointer */
+ unsigned int ccs; /* 0x69; P13, Condition code stack */
+ unsigned int usp; /* 0x6D; P14, User mode stack pointer */
+ unsigned int spc; /* 0x71; P15, Single step PC */
+ unsigned int pc; /* 0x75; Pseudo register (for the most part set to ERP). */
+
+} registers;
+
+typedef
+struct bp_register_image
+{
+ /* Support register bank 0. */
+ unsigned int s0_0;
+ unsigned int s1_0;
+ unsigned int s2_0;
+ unsigned int s3_0;
+ unsigned int s4_0;
+ unsigned int s5_0;
+ unsigned int s6_0;
+ unsigned int s7_0;
+ unsigned int s8_0;
+ unsigned int s9_0;
+ unsigned int s10_0;
+ unsigned int s11_0;
+ unsigned int s12_0;
+ unsigned int s13_0;
+ unsigned int s14_0;
+ unsigned int s15_0;
+
+ /* Support register bank 1. */
+ unsigned int s0_1;
+ unsigned int s1_1;
+ unsigned int s2_1;
+ unsigned int s3_1;
+ unsigned int s4_1;
+ unsigned int s5_1;
+ unsigned int s6_1;
+ unsigned int s7_1;
+ unsigned int s8_1;
+ unsigned int s9_1;
+ unsigned int s10_1;
+ unsigned int s11_1;
+ unsigned int s12_1;
+ unsigned int s13_1;
+ unsigned int s14_1;
+ unsigned int s15_1;
+
+ /* Support register bank 2. */
+ unsigned int s0_2;
+ unsigned int s1_2;
+ unsigned int s2_2;
+ unsigned int s3_2;
+ unsigned int s4_2;
+ unsigned int s5_2;
+ unsigned int s6_2;
+ unsigned int s7_2;
+ unsigned int s8_2;
+ unsigned int s9_2;
+ unsigned int s10_2;
+ unsigned int s11_2;
+ unsigned int s12_2;
+ unsigned int s13_2;
+ unsigned int s14_2;
+ unsigned int s15_2;
+
+ /* Support register bank 3. */
+ unsigned int s0_3; /* BP_CTRL */
+ unsigned int s1_3; /* BP_I0_START */
+ unsigned int s2_3; /* BP_I0_END */
+ unsigned int s3_3; /* BP_D0_START */
+ unsigned int s4_3; /* BP_D0_END */
+ unsigned int s5_3; /* BP_D1_START */
+ unsigned int s6_3; /* BP_D1_END */
+ unsigned int s7_3; /* BP_D2_START */
+ unsigned int s8_3; /* BP_D2_END */
+ unsigned int s9_3; /* BP_D3_START */
+ unsigned int s10_3; /* BP_D3_END */
+ unsigned int s11_3; /* BP_D4_START */
+ unsigned int s12_3; /* BP_D4_END */
+ unsigned int s13_3; /* BP_D5_START */
+ unsigned int s14_3; /* BP_D5_END */
+ unsigned int s15_3; /* BP_RESERVED */
+
+} support_registers;
+
+enum register_name
+{
+ R0, R1, R2, R3,
+ R4, R5, R6, R7,
+ R8, R9, R10, R11,
+ R12, R13, SP, ACR,
+
+ BZ, VR, PID, SRS,
+ WZ, EXS, EDA, MOF,
+ DZ, EBP, ERP, SRP,
+ NRP, CCS, USP, SPC,
+ PC,
+
+ S0, S1, S2, S3,
+ S4, S5, S6, S7,
+ S8, S9, S10, S11,
+ S12, S13, S14, S15
+
+};
+
+/* The register sizes of the registers in register_name. An unimplemented register
+ is designated by size 0 in this array. */
+static int register_size[] =
+{
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+
+ 1, 1, 4, 1,
+ 2, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+
+ 4,
+
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4
+
+};
+
+/* Contains the register image of the kernel.
+ (Global so that they can be reached from assembler code.) */
+registers reg;
+support_registers sreg;
+
+/************** Prototypes for local library functions ***********************/
+
+/* Copy of strcpy from libc. */
+static char *gdb_cris_strcpy(char *s1, const char *s2);
+
+/* Copy of strlen from libc. */
+static int gdb_cris_strlen(const char *s);
+
+/* Copy of memchr from libc. */
+static void *gdb_cris_memchr(const void *s, int c, int n);
+
+/* Copy of strtol from libc. Does only support base 16. */
+static int gdb_cris_strtol(const char *s, char **endptr, int base);
+
+/********************** Prototypes for local functions. **********************/
+
+/* Write a value to a specified register regno in the register image
+ of the current thread. */
+static int write_register(int regno, char *val);
+
+/* Read a value from a specified register in the register image. Returns the
+ status of the read operation. The register value is returned in valptr. */
+static int read_register(char regno, unsigned int *valptr);
+
+/* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
+int getDebugChar(void);
+
+#ifdef CONFIG_ETRAXFS_SIM
+int getDebugChar(void)
+{
+ return socketread();
+}
+#endif
+
+/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
+void putDebugChar(int val);
+
+#ifdef CONFIG_ETRAXFS_SIM
+void putDebugChar(int val)
+{
+ socketwrite((char *)&val, 1);
+}
+#endif
+
+/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
+ represented by int x. */
+static char highhex(int x);
+
+/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
+ represented by int x. */
+static char lowhex(int x);
+
+/* Returns the integer equivalent of a hexadecimal character. */
+static int hex(char ch);
+
+/* Convert the memory, pointed to by mem into hexadecimal representation.
+ Put the result in buf, and return a pointer to the last character
+ in buf (null). */
+static char *mem2hex(char *buf, unsigned char *mem, int count);
+
+/* Convert the array, in hexadecimal representation, pointed to by buf into
+ binary representation. Put the result in mem, and return a pointer to
+ the character after the last byte written. */
+static unsigned char *hex2mem(unsigned char *mem, char *buf, int count);
+
+/* Put the content of the array, in binary representation, pointed to by buf
+ into memory pointed to by mem, and return a pointer to
+ the character after the last byte written. */
+static unsigned char *bin2mem(unsigned char *mem, unsigned char *buf, int count);
+
+/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
+ returned. */
+static void getpacket(char *buffer);
+
+/* Send $<data>#<checksum> from the <data> in the array buffer. */
+static void putpacket(char *buffer);
+
+/* Build and send a response packet in order to inform the host the
+ stub is stopped. */
+static void stub_is_stopped(int sigval);
+
+/* All expected commands are sent from remote.c. Send a response according
+ to the description in remote.c. Not static since it needs to be reached
+ from assembler code. */
+void handle_exception(int sigval);
+
+/* Performs a complete re-start from scratch. ETRAX specific. */
+static void kill_restart(void);
+
+/******************** Prototypes for global functions. ***********************/
+
+/* The string str is prepended with the GDB printout token and sent. */
+void putDebugString(const unsigned char *str, int len);
+
+/* A static breakpoint to be used at startup. */
+void breakpoint(void);
+
+/* Avoid warning as the internal_stack is not used in the C-code. */
+#define USEDVAR(name) { if (name) { ; } }
+#define USEDFUN(name) { void (*pf)(void) = (void *)name; USEDVAR(pf) }
+
+/********************************** Packet I/O ******************************/
+/* BUFMAX defines the maximum number of characters in
+ inbound/outbound buffers */
+/* FIXME: How do we know it's enough? */
+#define BUFMAX 512
+
+/* Run-length encoding maximum length. Send 64 at most. */
+#define RUNLENMAX 64
+
+/* Definition of all valid hexadecimal characters */
+static const char hexchars[] = "0123456789abcdef";
+
+/* The inbound/outbound buffers used in packet I/O */
+static char input_buffer[BUFMAX];
+static char output_buffer[BUFMAX];
+
+/* Error and warning messages. */
+enum error_type
+{
+ SUCCESS, E01, E02, E03, E04, E05, E06,
+};
+
+static char *error_message[] =
+{
+ "",
+ "E01 Set current or general thread - H[c,g] - internal error.",
+ "E02 Change register content - P - cannot change read-only register.",
+ "E03 Thread is not alive.", /* T, not used. */
+ "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
+ "E05 Change register content - P - the register is not implemented..",
+ "E06 Change memory content - M - internal error.",
+};
+
+/********************************** Breakpoint *******************************/
+/* Use an internal stack in the breakpoint and interrupt response routines.
+ FIXME: How do we know the size of this stack is enough?
+ Global so it can be reached from assembler code. */
+#define INTERNAL_STACK_SIZE 1024
+char internal_stack[INTERNAL_STACK_SIZE];
+
+/* Due to the breakpoint return pointer, a state variable is needed to keep
+ track of whether it is a static (compiled) or dynamic (gdb-invoked)
+ breakpoint to be handled. A static breakpoint uses the content of register
+ ERP as it is whereas a dynamic breakpoint requires subtraction with 2
+ in order to execute the instruction. The first breakpoint is static; all
+ following are assumed to be dynamic. */
+static int dynamic_bp = 0;
+
+/********************************* String library ****************************/
+/* Single-step over library functions creates trap loops. */
+
+/* Copy char s2[] to s1[]. */
+static char*
+gdb_cris_strcpy(char *s1, const char *s2)
+{
+ char *s = s1;
+
+ for (s = s1; (*s++ = *s2++) != '\0'; )
+ ;
+ return s1;
+}
+
+/* Find length of s[]. */
+static int
+gdb_cris_strlen(const char *s)
+{
+ const char *sc;
+
+ for (sc = s; *sc != '\0'; sc++)
+ ;
+ return (sc - s);
+}
+
+/* Find first occurrence of c in s[n]. */
+static void*
+gdb_cris_memchr(const void *s, int c, int n)
+{
+ const unsigned char uc = c;
+ const unsigned char *su;
+
+ for (su = s; 0 < n; ++su, --n)
+ if (*su == uc)
+ return (void *)su;
+ return NULL;
+}
+/******************************* Standard library ****************************/
+/* Single-step over library functions creates trap loops. */
+/* Convert string to long. */
+static int
+gdb_cris_strtol(const char *s, char **endptr, int base)
+{
+ char *s1;
+ char *sd;
+ int x = 0;
+
+ for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
+ x = x * base + (sd - hexchars);
+
+ if (endptr) {
+ /* Unconverted suffix is stored in endptr unless endptr is NULL. */
+ *endptr = s1;
+ }
+
+ return x;
+}
+
+/********************************* Register image ****************************/
+
+/* Write a value to a specified register in the register image of the current
+ thread. Returns status code SUCCESS, E02 or E05. */
+static int
+write_register(int regno, char *val)
+{
+ int status = SUCCESS;
+
+ if (regno >= R0 && regno <= ACR) {
+ /* Consecutive 32-bit registers. */
+ hex2mem((unsigned char *)®.r0 + (regno - R0) * sizeof(unsigned int),
+ val, sizeof(unsigned int));
+
+ } else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) {
+ /* Read-only registers. */
+ status = E02;
+
+ } else if (regno == PID) {
+ /* 32-bit register. (Even though we already checked SRS and WZ, we cannot
+ combine this with the EXS - SPC write since SRS and WZ have different size.) */
+ hex2mem((unsigned char *)®.pid, val, sizeof(unsigned int));
+
+ } else if (regno == SRS) {
+ /* 8-bit register. */
+ hex2mem((unsigned char *)®.srs, val, sizeof(unsigned char));
+
+ } else if (regno >= EXS && regno <= SPC) {
+ /* Consecutive 32-bit registers. */
+ hex2mem((unsigned char *)®.exs + (regno - EXS) * sizeof(unsigned int),
+ val, sizeof(unsigned int));
+
+ } else if (regno == PC) {
+ /* Pseudo-register. Treat as read-only. */
+ status = E02;
+
+ } else if (regno >= S0 && regno <= S15) {
+ /* 32-bit registers. */
+ hex2mem((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int), val, sizeof(unsigned int));
+ } else {
+ /* Non-existing register. */
+ status = E05;
+ }
+ return status;
+}
+
+/* Read a value from a specified register in the register image. Returns the
+ value in the register or -1 for non-implemented registers. */
+static int
+read_register(char regno, unsigned int *valptr)
+{
+ int status = SUCCESS;
+
+ /* We read the zero registers from the register struct (instead of just returning 0)
+ to catch errors. */
+
+ if (regno >= R0 && regno <= ACR) {
+ /* Consecutive 32-bit registers. */
+ *valptr = *(unsigned int *)((char *)®.r0 + (regno - R0) * sizeof(unsigned int));
+
+ } else if (regno == BZ || regno == VR) {
+ /* Consecutive 8-bit registers. */
+ *valptr = (unsigned int)(*(unsigned char *)
+ ((char *)®.bz + (regno - BZ) * sizeof(char)));
+
+ } else if (regno == PID) {
+ /* 32-bit register. */
+ *valptr = *(unsigned int *)((char *)®.pid);
+
+ } else if (regno == SRS) {
+ /* 8-bit register. */
+ *valptr = (unsigned int)(*(unsigned char *)((char *)®.srs));
+
+ } else if (regno == WZ) {
+ /* 16-bit register. */
+ *valptr = (unsigned int)(*(unsigned short *)(char *)®.wz);
+
+ } else if (regno >= EXS && regno <= PC) {
+ /* Consecutive 32-bit registers. */
+ *valptr = *(unsigned int *)((char *)®.exs + (regno - EXS) * sizeof(unsigned int));
+
+ } else if (regno >= S0 && regno <= S15) {
+ /* Consecutive 32-bit registers, located elsewhere. */
+ *valptr = *(unsigned int *)((char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int));
+
+ } else {
+ /* Non-existing register. */
+ status = E05;
+ }
+ return status;
+
+}
+
+/********************************** Packet I/O ******************************/
+/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
+ represented by int x. */
+static inline char
+highhex(int x)
+{
+ return hexchars[(x >> 4) & 0xf];
+}
+
+/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
+ represented by int x. */
+static inline char
+lowhex(int x)
+{
+ return hexchars[x & 0xf];
+}
+
+/* Returns the integer equivalent of a hexadecimal character. */
+static int
+hex(char ch)
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ return (ch - 'a' + 10);
+ if ((ch >= '0') && (ch <= '9'))
+ return (ch - '0');
+ if ((ch >= 'A') && (ch <= 'F'))
+ return (ch - 'A' + 10);
+ return -1;
+}
+
+/* Convert the memory, pointed to by mem into hexadecimal representation.
+ Put the result in buf, and return a pointer to the last character
+ in buf (null). */
+
+static char *
+mem2hex(char *buf, unsigned char *mem, int count)
+{
+ int i;
+ int ch;
+
+ if (mem == NULL) {
+ /* Invalid address, caught by 'm' packet handler. */
+ for (i = 0; i < count; i++) {
+ *buf++ = '0';
+ *buf++ = '0';
+ }
+ } else {
+ /* Valid mem address. */
+ for (i = 0; i < count; i++) {
+ ch = *mem++;
+ *buf++ = highhex (ch);
+ *buf++ = lowhex (ch);
+ }
+ }
+ /* Terminate properly. */
+ *buf = '\0';
+ return buf;
+}
+
+/* Same as mem2hex, but puts it in network byte order. */
+static char *
+mem2hex_nbo(char *buf, unsigned char *mem, int count)
+{
+ int i;
+ int ch;
+
+ mem += count - 1;
+ for (i = 0; i < count; i++) {
+ ch = *mem--;
+ *buf++ = highhex (ch);
+ *buf++ = lowhex (ch);
+ }
+
+ /* Terminate properly. */
+ *buf = '\0';
+ return buf;
+}
+
+/* Convert the array, in hexadecimal representation, pointed to by buf into
+ binary representation. Put the result in mem, and return a pointer to
+ the character after the last byte written. */
+static unsigned char*
+hex2mem(unsigned char *mem, char *buf, int count)
+{
+ int i;
+ unsigned char ch;
+ for (i = 0; i < count; i++) {
+ ch = hex (*buf++) << 4;
+ ch = ch + hex (*buf++);
+ *mem++ = ch;
+ }
+ return mem;
+}
+
+/* Put the content of the array, in binary representation, pointed to by buf
+ into memory pointed to by mem, and return a pointer to the character after
+ the last byte written.
+ Gdb will escape $, #, and the escape char (0x7d). */
+static unsigned char*
+bin2mem(unsigned char *mem, unsigned char *buf, int count)
+{
+ int i;
+ unsigned char *next;
+ for (i = 0; i < count; i++) {
+ /* Check for any escaped characters. Be paranoid and
+ only unescape chars that should be escaped. */
+ if (*buf == 0x7d) {
+ next = buf + 1;
+ if (*next == 0x3 || *next == 0x4 || *next == 0x5D) {
+ /* #, $, ESC */
+ buf++;
+ *buf += 0x20;
+ }
+ }
+ *mem++ = *buf++;
+ }
+ return mem;
+}
+
+/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
+ returned. */
+static void
+getpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ int i;
+ int count;
+ char ch;
+
+ do {
+ while((ch = getDebugChar ()) != '$')
+ /* Wait for the start character $ and ignore all other characters */;
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+ /* Read until a # or the end of the buffer is reached */
+ while (count < BUFMAX) {
+ ch = getDebugChar();
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+
+ if (count >= BUFMAX)
+ continue;
+
+ buffer[count] = 0;
+
+ if (ch == '#') {
+ xmitcsum = hex(getDebugChar()) << 4;
+ xmitcsum += hex(getDebugChar());
+ if (checksum != xmitcsum) {
+ /* Wrong checksum */
+ putDebugChar('-');
+ } else {
+ /* Correct checksum */
+ putDebugChar('+');
+ /* If sequence characters are received, reply with them */
+ if (buffer[2] == ':') {
+ putDebugChar(buffer[0]);
+ putDebugChar(buffer[1]);
+ /* Remove the sequence characters from the buffer */
+ count = gdb_cris_strlen(buffer);
+ for (i = 3; i <= count; i++)
+ buffer[i - 3] = buffer[i];
+ }
+ }
+ }
+ } while (checksum != xmitcsum);
+}
+
+/* Send $<data>#<checksum> from the <data> in the array buffer. */
+
+static void
+putpacket(char *buffer)
+{
+ int checksum;
+ int runlen;
+ int encode;
+
+ do {
+ char *src = buffer;
+ putDebugChar('$');
+ checksum = 0;
+ while (*src) {
+ /* Do run length encoding */
+ putDebugChar(*src);
+ checksum += *src;
+ runlen = 0;
+ while (runlen < RUNLENMAX && *src == src[runlen]) {
+ runlen++;
+ }
+ if (runlen > 3) {
+ /* Got a useful amount */
+ putDebugChar ('*');
+ checksum += '*';
+ encode = runlen + ' ' - 4;
+ putDebugChar(encode);
+ checksum += encode;
+ src += runlen;
+ } else {
+ src++;
+ }
+ }
+ putDebugChar('#');
+ putDebugChar(highhex (checksum));
+ putDebugChar(lowhex (checksum));
+ } while(kgdb_started && (getDebugChar() != '+'));
+}
+
+/* The string str is prepended with the GDB printout token and sent. Required
+ in traditional implementations. */
+void
+putDebugString(const unsigned char *str, int len)
+{
+ /* Move SPC forward if we are single-stepping. */
+ asm("spchere:");
+ asm("move $spc, $r10");
+ asm("cmp.d spchere, $r10");
+ asm("bne nosstep");
+ asm("nop");
+ asm("move.d spccont, $r10");
+ asm("move $r10, $spc");
+ asm("nosstep:");
+
+ output_buffer[0] = 'O';
+ mem2hex(&output_buffer[1], (unsigned char *)str, len);
+ putpacket(output_buffer);
+
+ asm("spccont:");
+}
+
+/********************************** Handle exceptions ************************/
+/* Build and send a response packet in order to inform the host the
+ stub is stopped. TAAn...:r...;n...:r...;n...:r...;
+ AA = signal number
+ n... = register number (hex)
+ r... = register contents
+ n... = `thread'
+ r... = thread process ID. This is a hex integer.
+ n... = other string not starting with valid hex digit.
+ gdb should ignore this n,r pair and go on to the next.
+ This way we can extend the protocol. */
+static void
+stub_is_stopped(int sigval)
+{
+ char *ptr = output_buffer;
+ unsigned int reg_cont;
+
+ /* Send trap type (converted to signal) */
+
+ *ptr++ = 'T';
+ *ptr++ = highhex(sigval);
+ *ptr++ = lowhex(sigval);
+
+ if (((reg.exs & 0xff00) >> 8) == 0xc) {
+
+ /* Some kind of hardware watchpoint triggered. Find which one
+ and determine its type (read/write/access). */
+ int S, bp, trig_bits = 0, rw_bits = 0;
+ int trig_mask = 0;
+ unsigned int *bp_d_regs = &sreg.s3_3;
+ /* In a lot of cases, the stopped data address will simply be EDA.
+ In some cases, we adjust it to match the watched data range.
+ (We don't want to change the actual EDA though). */
+ unsigned int stopped_data_address;
+ /* The S field of EXS. */
+ S = (reg.exs & 0xffff0000) >> 16;
+
+ if (S & 1) {
+ /* Instruction watchpoint. */
+ /* FIXME: Check against, and possibly adjust reported EDA. */
+ } else {
+ /* Data watchpoint. Find the one that triggered. */
+ for (bp = 0; bp < 6; bp++) {
+
+ /* Dx_RD, Dx_WR in the S field of EXS for this BP. */
+ int bitpos_trig = 1 + bp * 2;
+ /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */
+ int bitpos_config = 2 + bp * 4;
+
+ /* Get read/write trig bits for this BP. */
+ trig_bits = (S & (3 << bitpos_trig)) >> bitpos_trig;
+
+ /* Read/write config bits for this BP. */
+ rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config;
+ if (trig_bits) {
+ /* Sanity check: the BP shouldn't trigger for accesses
+ that it isn't configured for. */
+ if ((rw_bits == 0x1 && trig_bits != 0x1) ||
+ (rw_bits == 0x2 && trig_bits != 0x2))
+ panic("Invalid r/w trigging for this BP");
+
+ /* Mark this BP as trigged for future reference. */
+ trig_mask |= (1 << bp);
+
+ if (reg.eda >= bp_d_regs[bp * 2] &&
+ reg.eda <= bp_d_regs[bp * 2 + 1]) {
+ /* EDA withing range for this BP; it must be the one
+ we're looking for. */
+ stopped_data_address = reg.eda;
+ break;
+ }
+ }
+ }
+ if (bp < 6) {
+ /* Found a trigged BP with EDA within its configured data range. */
+ } else if (trig_mask) {
+ /* Something triggered, but EDA doesn't match any BP's range. */
+ for (bp = 0; bp < 6; bp++) {
+ /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */
+ int bitpos_config = 2 + bp * 4;
+
+ /* Read/write config bits for this BP (needed later). */
+ rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config;
+
+ if (trig_mask & (1 << bp)) {
+ /* EDA within 31 bytes of the configured start address? */
+ if (reg.eda + 31 >= bp_d_regs[bp * 2]) {
+ /* Changing the reported address to match
+ the start address of the first applicable BP. */
+ stopped_data_address = bp_d_regs[bp * 2];
+ break;
+ } else {
+ /* We continue since we might find another useful BP. */
+ printk("EDA doesn't match trigged BP's range");
+ }
+ }
+ }
+ }
+
+ /* No match yet? */
+ BUG_ON(bp >= 6);
+ /* Note that we report the type according to what the BP is configured
+ for (otherwise we'd never report an 'awatch'), not according to how
+ it trigged. We did check that the trigged bits match what the BP is
+ configured for though. */
+ if (rw_bits == 0x1) {
+ /* read */
+ strncpy(ptr, "rwatch", 6);
+ ptr += 6;
+ } else if (rw_bits == 0x2) {
+ /* write */
+ strncpy(ptr, "watch", 5);
+ ptr += 5;
+ } else if (rw_bits == 0x3) {
+ /* access */
+ strncpy(ptr, "awatch", 6);
+ ptr += 6;
+ } else {
+ panic("Invalid r/w bits for this BP.");
+ }
+
+ *ptr++ = ':';
+ /* Note that we don't read_register(EDA, ...) */
+ ptr = mem2hex_nbo(ptr, (unsigned char *)&stopped_data_address, register_size[EDA]);
+ *ptr++ = ';';
+ }
+ }
+ /* Only send PC, frame and stack pointer. */
+ read_register(PC, ®_cont);
+ *ptr++ = highhex(PC);
+ *ptr++ = lowhex(PC);
+ *ptr++ = ':';
+ ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]);
+ *ptr++ = ';';
+
+ read_register(R8, ®_cont);
+ *ptr++ = highhex(R8);
+ *ptr++ = lowhex(R8);
+ *ptr++ = ':';
+ ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]);
+ *ptr++ = ';';
+
+ read_register(SP, ®_cont);
+ *ptr++ = highhex(SP);
+ *ptr++ = lowhex(SP);
+ *ptr++ = ':';
+ ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]);
+ *ptr++ = ';';
+
+ /* Send ERP as well; this will save us an entire register fetch in some cases. */
+ read_register(ERP, ®_cont);
+ *ptr++ = highhex(ERP);
+ *ptr++ = lowhex(ERP);
+ *ptr++ = ':';
+ ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]);
+ *ptr++ = ';';
+
+ /* null-terminate and send it off */
+ *ptr = 0;
+ putpacket(output_buffer);
+}
+
+/* Returns the size of an instruction that has a delay slot. */
+
+int insn_size(unsigned long pc)
+{
+ unsigned short opcode = *(unsigned short *)pc;
+ int size = 0;
+
+ switch ((opcode & 0x0f00) >> 8) {
+ case 0x0:
+ case 0x9:
+ case 0xb:
+ size = 2;
+ break;
+ case 0xe:
+ case 0xf:
+ size = 6;
+ break;
+ case 0xd:
+ /* Could be 4 or 6; check more bits. */
+ if ((opcode & 0xff) == 0xff)
+ size = 4;
+ else
+ size = 6;
+ break;
+ default:
+ panic("Couldn't find size of opcode 0x%x at 0x%lx\n", opcode, pc);
+ }
+
+ return size;
+}
+
+void register_fixup(int sigval)
+{
+ /* Compensate for ACR push at the beginning of exception handler. */
+ reg.sp += 4;
+
+ /* Standard case. */
+ reg.pc = reg.erp;
+ if (reg.erp & 0x1) {
+ /* Delay slot bit set. Report as stopped on proper instruction. */
+ if (reg.spc) {
+ /* Rely on SPC if set. */
+ reg.pc = reg.spc;
+ } else {
+ /* Calculate the PC from the size of the instruction
+ that the delay slot we're in belongs to. */
+ reg.pc += insn_size(reg.erp & ~1) - 1 ;
+ }
+ }
+
+ if ((reg.exs & 0x3) == 0x0) {
+ /* Bits 1 - 0 indicate the type of memory operation performed
+ by the interrupted instruction. 0 means no memory operation,
+ and EDA is undefined in that case. We zero it to avoid confusion. */
+ reg.eda = 0;
+ }
+
+ if (sigval == SIGTRAP) {
+ /* Break 8, single step or hardware breakpoint exception. */
+
+ /* Check IDX field of EXS. */
+ if (((reg.exs & 0xff00) >> 8) == 0x18) {
+
+ /* Break 8. */
+
+ /* Static (compiled) breakpoints must return to the next instruction
+ in order to avoid infinite loops (default value of ERP). Dynamic
+ (gdb-invoked) must subtract the size of the break instruction from
+ the ERP so that the instruction that was originally in the break
+ instruction's place will be run when we return from the exception. */
+ if (!dynamic_bp) {
+ /* Assuming that all breakpoints are dynamic from now on. */
+ dynamic_bp = 1;
+ } else {
+
+ /* Only if not in a delay slot. */
+ if (!(reg.erp & 0x1)) {
+ reg.erp -= 2;
+ reg.pc -= 2;
+ }
+ }
+
+ } else if (((reg.exs & 0xff00) >> 8) == 0x3) {
+ /* Single step. */
+ /* Don't fiddle with S1. */
+
+ } else if (((reg.exs & 0xff00) >> 8) == 0xc) {
+
+ /* Hardware watchpoint exception. */
+
+ /* SPC has been updated so that we will get a single step exception
+ when we return, but we don't want that. */
+ reg.spc = 0;
+
+ /* Don't fiddle with S1. */
+ }
+
+ } else if (sigval == SIGINT) {
+ /* Nothing special. */
+ }
+}
+
+static void insert_watchpoint(char type, int addr, int len)
+{
+ /* Breakpoint/watchpoint types (GDB terminology):
+ 0 = memory breakpoint for instructions
+ (not supported; done via memory write instead)
+ 1 = hardware breakpoint for instructions (supported)
+ 2 = write watchpoint (supported)
+ 3 = read watchpoint (supported)
+ 4 = access watchpoint (supported) */
+
+ if (type < '1' || type > '4') {
+ output_buffer[0] = 0;
+ return;
+ }
+
+ /* Read watchpoints are set as access watchpoints, because of GDB's
+ inability to deal with pure read watchpoints. */
+ if (type == '3')
+ type = '4';
+
+ if (type == '1') {
+ /* Hardware (instruction) breakpoint. */
+ /* Bit 0 in BP_CTRL holds the configuration for I0. */
+ if (sreg.s0_3 & 0x1) {
+ /* Already in use. */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ return;
+ }
+ /* Configure. */
+ sreg.s1_3 = addr;
+ sreg.s2_3 = (addr + len - 1);
+ sreg.s0_3 |= 1;
+ } else {
+ int bp;
+ unsigned int *bp_d_regs = &sreg.s3_3;
+
+ /* The watchpoint allocation scheme is the simplest possible.
+ For example, if a region is watched for read and
+ a write watch is requested, a new watchpoint will
+ be used. Also, if a watch for a region that is already
+ covered by one or more existing watchpoints, a new
+ watchpoint will be used. */
+
+ /* First, find a free data watchpoint. */
+ for (bp = 0; bp < 6; bp++) {
+ /* Each data watchpoint's control registers occupy 2 bits
+ (hence the 3), starting at bit 2 for D0 (hence the 2)
+ with 4 bits between for each watchpoint (yes, the 4). */
+ if (!(sreg.s0_3 & (0x3 << (2 + (bp * 4))))) {
+ break;
+ }
+ }
+
+ if (bp > 5) {
+ /* We're out of watchpoints. */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ return;
+ }
+
+ /* Configure the control register first. */
+ if (type == '3' || type == '4') {
+ /* Trigger on read. */
+ sreg.s0_3 |= (1 << (2 + bp * 4));
+ }
+ if (type == '2' || type == '4') {
+ /* Trigger on write. */
+ sreg.s0_3 |= (2 << (2 + bp * 4));
+ }
+
+ /* Ugly pointer arithmetics to configure the watched range. */
+ bp_d_regs[bp * 2] = addr;
+ bp_d_regs[bp * 2 + 1] = (addr + len - 1);
+ }
+
+ /* Set the S1 flag to enable watchpoints. */
+ reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
+ gdb_cris_strcpy(output_buffer, "OK");
+}
+
+static void remove_watchpoint(char type, int addr, int len)
+{
+ /* Breakpoint/watchpoint types:
+ 0 = memory breakpoint for instructions
+ (not supported; done via memory write instead)
+ 1 = hardware breakpoint for instructions (supported)
+ 2 = write watchpoint (supported)
+ 3 = read watchpoint (supported)
+ 4 = access watchpoint (supported) */
+ if (type < '1' || type > '4') {
+ output_buffer[0] = 0;
+ return;
+ }
+
+ /* Read watchpoints are set as access watchpoints, because of GDB's
+ inability to deal with pure read watchpoints. */
+ if (type == '3')
+ type = '4';
+
+ if (type == '1') {
+ /* Hardware breakpoint. */
+ /* Bit 0 in BP_CTRL holds the configuration for I0. */
+ if (!(sreg.s0_3 & 0x1)) {
+ /* Not in use. */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ return;
+ }
+ /* Deconfigure. */
+ sreg.s1_3 = 0;
+ sreg.s2_3 = 0;
+ sreg.s0_3 &= ~1;
+ } else {
+ int bp;
+ unsigned int *bp_d_regs = &sreg.s3_3;
+ /* Try to find a watchpoint that is configured for the
+ specified range, then check that read/write also matches. */
+
+ /* Ugly pointer arithmetic, since I cannot rely on a
+ single switch (addr) as there may be several watchpoints with
+ the same start address for example. */
+
+ for (bp = 0; bp < 6; bp++) {
+ if (bp_d_regs[bp * 2] == addr &&
+ bp_d_regs[bp * 2 + 1] == (addr + len - 1)) {
+ /* Matching range. */
+ int bitpos = 2 + bp * 4;
+ int rw_bits;
+
+ /* Read/write bits for this BP. */
+ rw_bits = (sreg.s0_3 & (0x3 << bitpos)) >> bitpos;
+
+ if ((type == '3' && rw_bits == 0x1) ||
+ (type == '2' && rw_bits == 0x2) ||
+ (type == '4' && rw_bits == 0x3)) {
+ /* Read/write matched. */
+ break;
+ }
+ }
+ }
+
+ if (bp > 5) {
+ /* No watchpoint matched. */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ return;
+ }
+
+ /* Found a matching watchpoint. Now, deconfigure it by
+ both disabling read/write in bp_ctrl and zeroing its
+ start/end addresses. */
+ sreg.s0_3 &= ~(3 << (2 + (bp * 4)));
+ bp_d_regs[bp * 2] = 0;
+ bp_d_regs[bp * 2 + 1] = 0;
+ }
+
+ /* Note that we don't clear the S1 flag here. It's done when continuing. */
+ gdb_cris_strcpy(output_buffer, "OK");
+}
+
+
+
+/* All expected commands are sent from remote.c. Send a response according
+ to the description in remote.c. */
+void
+handle_exception(int sigval)
+{
+ /* Avoid warning of not used. */
+
+ USEDFUN(handle_exception);
+ USEDVAR(internal_stack[0]);
+
+ register_fixup(sigval);
+
+ /* Send response. */
+ stub_is_stopped(sigval);
+
+ for (;;) {
+ output_buffer[0] = '\0';
+ getpacket(input_buffer);
+ switch (input_buffer[0]) {
+ case 'g':
+ /* Read registers: g
+ Success: Each byte of register data is described by two hex digits.
+ Registers are in the internal order for GDB, and the bytes
+ in a register are in the same order the machine uses.
+ Failure: void. */
+ {
+ char *buf;
+ /* General and special registers. */
+ buf = mem2hex(output_buffer, (char *)®, sizeof(registers));
+ /* Support registers. */
+ /* -1 because of the null termination that mem2hex adds. */
+ mem2hex(buf,
+ (char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
+ 16 * sizeof(unsigned int));
+ break;
+ }
+ case 'G':
+ /* Write registers. GXX..XX
+ Each byte of register data is described by two hex digits.
+ Success: OK
+ Failure: void. */
+ /* General and special registers. */
+ hex2mem((char *)®, &input_buffer[1], sizeof(registers));
+ /* Support registers. */
+ hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
+ &input_buffer[1] + sizeof(registers),
+ 16 * sizeof(unsigned int));
+ gdb_cris_strcpy(output_buffer, "OK");
+ break;
+
+ case 'P':
+ /* Write register. Pn...=r...
+ Write register n..., hex value without 0x, with value r...,
+ which contains a hex value without 0x and two hex digits
+ for each byte in the register (target byte order). P1f=11223344 means
+ set register 31 to 44332211.
+ Success: OK
+ Failure: E02, E05 */
+ {
+ char *suffix;
+ int regno = gdb_cris_strtol(&input_buffer[1], &suffix, 16);
+ int status;
+
+ status = write_register(regno, suffix+1);
+
+ switch (status) {
+ case E02:
+ /* Do not support read-only registers. */
+ gdb_cris_strcpy(output_buffer, error_message[E02]);
+ break;
+ case E05:
+ /* Do not support non-existing registers. */
+ gdb_cris_strcpy(output_buffer, error_message[E05]);
+ break;
+ default:
+ /* Valid register number. */
+ gdb_cris_strcpy(output_buffer, "OK");
+ break;
+ }
+ }
+ break;
+
+ case 'm':
+ /* Read from memory. mAA..AA,LLLL
+ AA..AA is the address and LLLL is the length.
+ Success: XX..XX is the memory content. Can be fewer bytes than
+ requested if only part of the data may be read. m6000120a,6c means
+ retrieve 108 byte from base address 6000120a.
+ Failure: void. */
+ {
+ char *suffix;
+ unsigned char *addr = (unsigned char *)gdb_cris_strtol(&input_buffer[1],
+ &suffix, 16);
+ int len = gdb_cris_strtol(suffix+1, 0, 16);
+
+ /* Bogus read (i.e. outside the kernel's
+ segment)? . */
+ if (!((unsigned int)addr >= 0xc0000000 &&
+ (unsigned int)addr < 0xd0000000))
+ addr = NULL;
+
+ mem2hex(output_buffer, addr, len);
+ }
+ break;
+
+ case 'X':
+ /* Write to memory. XAA..AA,LLLL:XX..XX
+ AA..AA is the start address, LLLL is the number of bytes, and
+ XX..XX is the binary data.
+ Success: OK
+ Failure: void. */
+ case 'M':
+ /* Write to memory. MAA..AA,LLLL:XX..XX
+ AA..AA is the start address, LLLL is the number of bytes, and
+ XX..XX is the hexadecimal data.
+ Success: OK
+ Failure: void. */
+ {
+ char *lenptr;
+ char *dataptr;
+ unsigned char *addr = (unsigned char *)gdb_cris_strtol(&input_buffer[1],
+ &lenptr, 16);
+ int len = gdb_cris_strtol(lenptr+1, &dataptr, 16);
+ if (*lenptr == ',' && *dataptr == ':') {
+ if (input_buffer[0] == 'M') {
+ hex2mem(addr, dataptr + 1, len);
+ } else /* X */ {
+ bin2mem(addr, dataptr + 1, len);
+ }
+ gdb_cris_strcpy(output_buffer, "OK");
+ }
+ else {
+ gdb_cris_strcpy(output_buffer, error_message[E06]);
+ }
+ }
+ break;
+
+ case 'c':
+ /* Continue execution. cAA..AA
+ AA..AA is the address where execution is resumed. If AA..AA is
+ omitted, resume at the present address.
+ Success: return to the executing thread.
+ Failure: will never know. */
+
+ if (input_buffer[1] != '\0') {
+ /* FIXME: Doesn't handle address argument. */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ break;
+ }
+
+ /* Before continuing, make sure everything is set up correctly. */
+
+ /* Set the SPC to some unlikely value. */
+ reg.spc = 0;
+ /* Set the S1 flag to 0 unless some watchpoint is enabled (since setting
+ S1 to 0 would also disable watchpoints). (Note that bits 26-31 in BP_CTRL
+ are reserved, so don't check against those). */
+ if ((sreg.s0_3 & 0x3fff) == 0) {
+ reg.ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
+ }
+
+ return;
+
+ case 's':
+ /* Step. sAA..AA
+ AA..AA is the address where execution is resumed. If AA..AA is
+ omitted, resume at the present address. Success: return to the
+ executing thread. Failure: will never know. */
+
+ if (input_buffer[1] != '\0') {
+ /* FIXME: Doesn't handle address argument. */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ break;
+ }
+
+ /* Set the SPC to PC, which is where we'll return
+ (deduced previously). */
+ reg.spc = reg.pc;
+
+ /* Set the S1 (first stacked, not current) flag, which will
+ kick into action when we rfe. */
+ reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
+ return;
+
+ case 'Z':
+
+ /* Insert breakpoint or watchpoint, Ztype,addr,length.
+ Remote protocol says: A remote target shall return an empty string
+ for an unrecognized breakpoint or watchpoint packet type. */
+ {
+ char *lenptr;
+ char *dataptr;
+ int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16);
+ int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16);
+ char type = input_buffer[1];
+
+ insert_watchpoint(type, addr, len);
+ break;
+ }
+
+ case 'z':
+ /* Remove breakpoint or watchpoint, Ztype,addr,length.
+ Remote protocol says: A remote target shall return an empty string
+ for an unrecognized breakpoint or watchpoint packet type. */
+ {
+ char *lenptr;
+ char *dataptr;
+ int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16);
+ int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16);
+ char type = input_buffer[1];
+
+ remove_watchpoint(type, addr, len);
+ break;
+ }
+
+
+ case '?':
+ /* The last signal which caused a stop. ?
+ Success: SAA, where AA is the signal number.
+ Failure: void. */
+ output_buffer[0] = 'S';
+ output_buffer[1] = highhex(sigval);
+ output_buffer[2] = lowhex(sigval);
+ output_buffer[3] = 0;
+ break;
+
+ case 'D':
+ /* Detach from host. D
+ Success: OK, and return to the executing thread.
+ Failure: will never know */
+ putpacket("OK");
+ return;
+
+ case 'k':
+ case 'r':
+ /* kill request or reset request.
+ Success: restart of target.
+ Failure: will never know. */
+ kill_restart();
+ break;
+
+ case 'C':
+ case 'S':
+ case '!':
+ case 'R':
+ case 'd':
+ /* Continue with signal sig. Csig;AA..AA
+ Step with signal sig. Ssig;AA..AA
+ Use the extended remote protocol. !
+ Restart the target system. R0
+ Toggle debug flag. d
+ Search backwards. tAA:PP,MM
+ Not supported: E04 */
+
+ /* FIXME: What's the difference between not supported
+ and ignored (below)? */
+ gdb_cris_strcpy(output_buffer, error_message[E04]);
+ break;
+
+ default:
+ /* The stub should ignore other request and send an empty
+ response ($#<checksum>). This way we can extend the protocol and GDB
+ can tell whether the stub it is talking to uses the old or the new. */
+ output_buffer[0] = 0;
+ break;
+ }
+ putpacket(output_buffer);
+ }
+}
+
+void
+kgdb_init(void)
+{
+ reg_intr_vect_rw_mask intr_mask;
+ reg_ser_rw_intr_mask ser_intr_mask;
+
+ /* Configure the kgdb serial port. */
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+ /* Note: no shortcut registered (not handled by multiple_interrupt).
+ See entry.S. */
+ set_exception_vector(SER0_INTR_VECT, kgdb_handle_exception);
+ /* Enable the ser irq in the global config. */
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ intr_mask.ser0 = 1;
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask);
+ ser_intr_mask.data_avail = regk_ser_yes;
+ REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask);
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+ /* Note: no shortcut registered (not handled by multiple_interrupt).
+ See entry.S. */
+ set_exception_vector(SER1_INTR_VECT, kgdb_handle_exception);
+ /* Enable the ser irq in the global config. */
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ intr_mask.ser1 = 1;
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask);
+ ser_intr_mask.data_avail = regk_ser_yes;
+ REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask);
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+ /* Note: no shortcut registered (not handled by multiple_interrupt).
+ See entry.S. */
+ set_exception_vector(SER2_INTR_VECT, kgdb_handle_exception);
+ /* Enable the ser irq in the global config. */
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ intr_mask.ser2 = 1;
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask);
+ ser_intr_mask.data_avail = regk_ser_yes;
+ REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask);
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+ /* Note: no shortcut registered (not handled by multiple_interrupt).
+ See entry.S. */
+ set_exception_vector(SER3_INTR_VECT, kgdb_handle_exception);
+ /* Enable the ser irq in the global config. */
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ intr_mask.ser3 = 1;
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask);
+ ser_intr_mask.data_avail = regk_ser_yes;
+ REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask);
+#endif
+
+}
+/* Performs a complete re-start from scratch. */
+static void
+kill_restart(void)
+{
+ machine_restart("");
+}
+
+/* Use this static breakpoint in the start-up only. */
+
+void
+breakpoint(void)
+{
+ kgdb_started = 1;
+ dynamic_bp = 0; /* This is a static, not a dynamic breakpoint. */
+ __asm__ volatile ("break 8"); /* Jump to kgdb_handle_breakpoint. */
+}
+
+/****************************** End of file **********************************/
diff --git a/arch/cris/arch-v32/kernel/kgdb_asm.S b/arch/cris/arch-v32/kernel/kgdb_asm.S
new file mode 100644
index 0000000..b350dd2
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/kgdb_asm.S
@@ -0,0 +1,552 @@
+/*
+ * Copyright (C) 2004 Axis Communications AB
+ *
+ * Code for handling break 8, hardware breakpoint, single step, and serial
+ * port exceptions for kernel debugging purposes.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/intr_vect.h>
+
+ ;; Exported functions.
+ .globl kgdb_handle_exception
+
+kgdb_handle_exception:
+
+;; Create a register image of the caller.
+;;
+;; First of all, save the ACR on the stack since we need it for address calculations.
+;; We put it into the register struct later.
+
+ subq 4, $sp
+ move.d $acr, [$sp]
+
+;; Now we are free to use ACR all we want.
+;; If we were running this handler with interrupts on, we would have to be careful
+;; to save and restore CCS manually, but since we aren't we treat it like every other
+;; register.
+
+ move.d reg, $acr
+ move.d $r0, [$acr] ; Save R0 (start of register struct)
+ addq 4, $acr
+ move.d $r1, [$acr] ; Save R1
+ addq 4, $acr
+ move.d $r2, [$acr] ; Save R2
+ addq 4, $acr
+ move.d $r3, [$acr] ; Save R3
+ addq 4, $acr
+ move.d $r4, [$acr] ; Save R4
+ addq 4, $acr
+ move.d $r5, [$acr] ; Save R5
+ addq 4, $acr
+ move.d $r6, [$acr] ; Save R6
+ addq 4, $acr
+ move.d $r7, [$acr] ; Save R7
+ addq 4, $acr
+ move.d $r8, [$acr] ; Save R8
+ addq 4, $acr
+ move.d $r9, [$acr] ; Save R9
+ addq 4, $acr
+ move.d $r10, [$acr] ; Save R10
+ addq 4, $acr
+ move.d $r11, [$acr] ; Save R11
+ addq 4, $acr
+ move.d $r12, [$acr] ; Save R12
+ addq 4, $acr
+ move.d $r13, [$acr] ; Save R13
+ addq 4, $acr
+ move.d $sp, [$acr] ; Save SP (R14)
+ addq 4, $acr
+
+ ;; The ACR register is already saved on the stack, so pop it from there.
+ move.d [$sp],$r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+
+ move $bz, [$acr]
+ addq 1, $acr
+ move $vr, [$acr]
+ addq 1, $acr
+ move $pid, [$acr]
+ addq 4, $acr
+ move $srs, [$acr]
+ addq 1, $acr
+ move $wz, [$acr]
+ addq 2, $acr
+ move $exs, [$acr]
+ addq 4, $acr
+ move $eda, [$acr]
+ addq 4, $acr
+ move $mof, [$acr]
+ addq 4, $acr
+ move $dz, [$acr]
+ addq 4, $acr
+ move $ebp, [$acr]
+ addq 4, $acr
+ move $erp, [$acr]
+ addq 4, $acr
+ move $srp, [$acr]
+ addq 4, $acr
+ move $nrp, [$acr]
+ addq 4, $acr
+ move $ccs, [$acr]
+ addq 4, $acr
+ move $usp, [$acr]
+ addq 4, $acr
+ move $spc, [$acr]
+ addq 4, $acr
+
+;; Skip the pseudo-PC.
+ addq 4, $acr
+
+;; Save the support registers in bank 0 - 3.
+ clear.d $r1 ; Bank counter
+ move.d sreg, $acr
+
+;; Bank 0
+ move $r1, $srs
+ nop
+ nop
+ nop
+ move $s0, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s1, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s2, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s3, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s4, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s5, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s6, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s7, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s8, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s9, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s10, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s11, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s12, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+
+ ;; Nothing in S13 - S15, bank 0
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+
+;; Bank 1 and bank 2 have the same layout, hence the loop.
+ addq 1, $r1
+1:
+ move $r1, $srs
+ nop
+ nop
+ nop
+ move $s0, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s1, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s2, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s3, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s4, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s5, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s6, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+
+ ;; Nothing in S7 - S15, bank 1 and 2
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+ clear.d [$acr]
+ addq 4, $acr
+
+ addq 1, $r1
+ cmpq 3, $r1
+ bne 1b
+ nop
+
+;; Bank 3
+ move $r1, $srs
+ nop
+ nop
+ nop
+ move $s0, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s1, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s2, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s3, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s4, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s5, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s6, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s7, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s8, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s9, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s10, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s11, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s12, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s13, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+ move $s14, $r0
+ move.d $r0, [$acr]
+ addq 4, $acr
+;; Nothing in S15, bank 3
+ clear.d [$acr]
+ addq 4, $acr
+
+;; Check what got us here: get IDX field of EXS.
+ move $exs, $r10
+ and.d 0xff00, $r10
+ lsrq 8, $r10
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+ cmp.d SER0_INTR_VECT, $r10 ; IRQ for serial port 0
+ beq sigint
+ nop
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+ cmp.d SER1_INTR_VECT, $r10 ; IRQ for serial port 1
+ beq sigint
+ nop
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+ cmp.d SER2_INTR_VECT, $r10 ; IRQ for serial port 2
+ beq sigint
+ nop
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+ cmp.d SER3_INTR_VECT, $r10 ; IRQ for serial port 3
+ beq sigint
+ nop
+#endif
+;; Multiple interrupt must be due to serial break.
+ cmp.d 0x30, $r10 ; Multiple interrupt
+ beq sigint
+ nop
+;; Neither of those? Then it's a sigtrap.
+ ba handle_comm
+ moveq 5, $r10 ; Set SIGTRAP (delay slot)
+
+sigint:
+ ;; Serial interrupt; get character
+ jsr getDebugChar
+ nop ; Delay slot
+ cmp.b 3, $r10 ; \003 (Ctrl-C)?
+ bne return ; No, get out of here
+ nop
+ moveq 2, $r10 ; Set SIGINT
+
+;;
+;; Handle the communication
+;;
+handle_comm:
+ move.d internal_stack+1020, $sp ; Use the internal stack which grows upwards
+ jsr handle_exception ; Interactive routine
+ nop
+
+;;
+;; Return to the caller
+;;
+return:
+
+;; First of all, write the support registers.
+ clear.d $r1 ; Bank counter
+ move.d sreg, $acr
+
+;; Bank 0
+ move $r1, $srs
+ nop
+ nop
+ nop
+ move.d [$acr], $r0
+ move $r0, $s0
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s1
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s2
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s3
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s4
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s5
+ addq 4, $acr
+
+;; Nothing in S6 - S7, bank 0.
+ addq 4, $acr
+ addq 4, $acr
+
+ move.d [$acr], $r0
+ move $r0, $s8
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s9
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s10
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s11
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s12
+ addq 4, $acr
+
+;; Nothing in S13 - S15, bank 0
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+
+;; Bank 1 and bank 2 have the same layout, hence the loop.
+ addq 1, $r1
+2:
+ move $r1, $srs
+ nop
+ nop
+ nop
+ move.d [$acr], $r0
+ move $r0, $s0
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s1
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s2
+ addq 4, $acr
+
+;; S3 (MM_CAUSE) is read-only.
+ addq 4, $acr
+
+ move.d [$acr], $r0
+ move $r0, $s4
+ addq 4, $acr
+
+;; FIXME: Actually write S5/S6? (Affects MM_CAUSE.)
+ addq 4, $acr
+ addq 4, $acr
+
+;; Nothing in S7 - S15, bank 1 and 2
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+ addq 4, $acr
+
+ addq 1, $r1
+ cmpq 3, $r1
+ bne 2b
+ nop
+
+;; Bank 3
+ move $r1, $srs
+ nop
+ nop
+ nop
+ move.d [$acr], $r0
+ move $r0, $s0
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s1
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s2
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s3
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s4
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s5
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s6
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s7
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s8
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s9
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s10
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s11
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s12
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s13
+ addq 4, $acr
+ move.d [$acr], $r0
+ move $r0, $s14
+ addq 4, $acr
+
+;; Nothing in S15, bank 3
+ addq 4, $acr
+
+;; Now, move on to the regular register restoration process.
+
+ move.d reg, $acr ; Reset ACR to point at the beginning of the register image
+ move.d [$acr], $r0 ; Restore R0
+ addq 4, $acr
+ move.d [$acr], $r1 ; Restore R1
+ addq 4, $acr
+ move.d [$acr], $r2 ; Restore R2
+ addq 4, $acr
+ move.d [$acr], $r3 ; Restore R3
+ addq 4, $acr
+ move.d [$acr], $r4 ; Restore R4
+ addq 4, $acr
+ move.d [$acr], $r5 ; Restore R5
+ addq 4, $acr
+ move.d [$acr], $r6 ; Restore R6
+ addq 4, $acr
+ move.d [$acr], $r7 ; Restore R7
+ addq 4, $acr
+ move.d [$acr], $r8 ; Restore R8
+ addq 4, $acr
+ move.d [$acr], $r9 ; Restore R9
+ addq 4, $acr
+ move.d [$acr], $r10 ; Restore R10
+ addq 4, $acr
+ move.d [$acr], $r11 ; Restore R11
+ addq 4, $acr
+ move.d [$acr], $r12 ; Restore R12
+ addq 4, $acr
+ move.d [$acr], $r13 ; Restore R13
+
+;;
+;; We restore all registers, even though some of them probably haven't changed.
+;;
+
+ addq 4, $acr
+ move.d [$acr], $sp ; Restore SP (R14)
+
+ ;; ACR cannot be restored just yet.
+ addq 8, $acr
+
+ ;; Skip BZ, VR.
+ addq 2, $acr
+
+ move [$acr], $pid ; Restore PID
+ addq 4, $acr
+ move [$acr], $srs ; Restore SRS
+ nop
+ nop
+ nop
+ addq 1, $acr
+
+ ;; Skip WZ.
+ addq 2, $acr
+
+ move [$acr], $exs ; Restore EXS.
+ addq 4, $acr
+ move [$acr], $eda ; Restore EDA.
+ addq 4, $acr
+ move [$acr], $mof ; Restore MOF.
+
+ ;; Skip DZ.
+ addq 8, $acr
+
+ move [$acr], $ebp ; Restore EBP.
+ addq 4, $acr
+ move [$acr], $erp ; Restore ERP.
+ addq 4, $acr
+ move [$acr], $srp ; Restore SRP.
+ addq 4, $acr
+ move [$acr], $nrp ; Restore NRP.
+ addq 4, $acr
+ move [$acr], $ccs ; Restore CCS like an ordinary register.
+ addq 4, $acr
+ move [$acr], $usp ; Restore USP
+ addq 4, $acr
+ move [$acr], $spc ; Restore SPC
+ ; No restoration of pseudo-PC of course.
+
+ move.d reg, $acr ; Reset ACR to point at the beginning of the register image
+ add.d 15*4, $acr
+ move.d [$acr], $acr ; Finally, restore ACR.
+ rete ; Same as jump ERP
+ rfe ; Shifts CCS
diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c
new file mode 100644
index 0000000..a2b8aa3
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/pinmux.c
@@ -0,0 +1,229 @@
+/*
+ * Allocator for I/O pins. All pins are allocated to GPIO at bootup.
+ * Unassigned pins and GPIO pins can be allocated to a fixed interface
+ * or the I/O processor instead.
+ *
+ * Copyright (c) 2004 Axis Communications AB.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/hwregs/pinmux_defs.h>
+
+#undef DEBUG
+
+#define PORT_PINS 18
+#define PORTS 4
+
+static char pins[PORTS][PORT_PINS];
+static DEFINE_SPINLOCK(pinmux_lock);
+
+static void crisv32_pinmux_set(int port);
+
+int
+crisv32_pinmux_init(void)
+{
+ static int initialized = 0;
+
+ if (!initialized) {
+ reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
+ initialized = 1;
+ pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
+ pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
+ REG_WR(pinmux, regi_pinmux, rw_pa, pa);
+ crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
+ crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
+ crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio);
+ crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio);
+ }
+
+ return 0;
+}
+
+int
+crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
+{
+ int i;
+ unsigned long flags;
+
+ crisv32_pinmux_init();
+
+ if (port > PORTS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&pinmux_lock, flags);
+
+ for (i = first_pin; i <= last_pin; i++)
+ {
+ if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
+ (pins[port][i] != mode))
+ {
+ spin_unlock_irqrestore(&pinmux_lock, flags);
+#ifdef DEBUG
+ panic("Pinmux alloc failed!\n");
+#endif
+ return -EPERM;
+ }
+ }
+
+ for (i = first_pin; i <= last_pin; i++)
+ pins[port][i] = mode;
+
+ crisv32_pinmux_set(port);
+
+ spin_unlock_irqrestore(&pinmux_lock, flags);
+
+ return 0;
+}
+
+int
+crisv32_pinmux_alloc_fixed(enum fixed_function function)
+{
+ int ret = -EINVAL;
+ char saved[sizeof pins];
+ unsigned long flags;
+
+ spin_lock_irqsave(&pinmux_lock, flags);
+
+ /* Save internal data for recovery */
+ memcpy(saved, pins, sizeof pins);
+
+ reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
+
+ switch(function)
+ {
+ case pinmux_ser1:
+ ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
+ hwprot.ser1 = regk_pinmux_yes;
+ break;
+ case pinmux_ser2:
+ ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
+ hwprot.ser2 = regk_pinmux_yes;
+ break;
+ case pinmux_ser3:
+ ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
+ hwprot.ser3 = regk_pinmux_yes;
+ break;
+ case pinmux_sser0:
+ ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
+ ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
+ hwprot.sser0 = regk_pinmux_yes;
+ break;
+ case pinmux_sser1:
+ ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
+ hwprot.sser1 = regk_pinmux_yes;
+ break;
+ case pinmux_ata0:
+ ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
+ ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
+ hwprot.ata0 = regk_pinmux_yes;
+ break;
+ case pinmux_ata1:
+ ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
+ ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
+ hwprot.ata1 = regk_pinmux_yes;
+ break;
+ case pinmux_ata2:
+ ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
+ ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
+ hwprot.ata2 = regk_pinmux_yes;
+ break;
+ case pinmux_ata3:
+ ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
+ ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
+ hwprot.ata2 = regk_pinmux_yes;
+ break;
+ case pinmux_ata:
+ ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
+ ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
+ hwprot.ata = regk_pinmux_yes;
+ break;
+ case pinmux_eth1:
+ ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
+ hwprot.eth1 = regk_pinmux_yes;
+ hwprot.eth1_mgm = regk_pinmux_yes;
+ break;
+ case pinmux_timer:
+ ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
+ hwprot.timer = regk_pinmux_yes;
+ spin_unlock_irqrestore(&pinmux_lock, flags);
+ return ret;
+ }
+
+ if (!ret)
+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
+ else
+ memcpy(pins, saved, sizeof pins);
+
+ spin_unlock_irqrestore(&pinmux_lock, flags);
+
+ return ret;
+}
+
+void
+crisv32_pinmux_set(int port)
+{
+ int i;
+ int gpio_val = 0;
+ int iop_val = 0;
+
+ for (i = 0; i < PORT_PINS; i++)
+ {
+ if (pins[port][i] == pinmux_gpio)
+ gpio_val |= (1 << i);
+ else if (pins[port][i] == pinmux_iop)
+ iop_val |= (1 << i);
+ }
+
+ REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val);
+ REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val);
+
+#ifdef DEBUG
+ crisv32_pinmux_dump();
+#endif
+}
+
+int
+crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
+{
+ int i;
+ unsigned long flags;
+
+ crisv32_pinmux_init();
+
+ if (port > PORTS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&pinmux_lock, flags);
+
+ for (i = first_pin; i <= last_pin; i++)
+ pins[port][i] = pinmux_none;
+
+ crisv32_pinmux_set(port);
+ spin_unlock_irqrestore(&pinmux_lock, flags);
+
+ return 0;
+}
+
+void
+crisv32_pinmux_dump(void)
+{
+ int i, j;
+
+ crisv32_pinmux_init();
+
+ for (i = 0; i < PORTS; i++)
+ {
+ printk("Port %c\n", 'B'+i);
+ for (j = 0; j < PORT_PINS; j++)
+ printk(" Pin %d = %d\n", j, pins[i][j]);
+ }
+}
+
+__initcall(crisv32_pinmux_init);
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
new file mode 100644
index 0000000..882be42
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2000-2003 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ * Mikael Starvik (starvik@axis.com)
+ * Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
+ *
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+extern void stop_watchdog(void);
+
+#ifdef CONFIG_ETRAX_GPIO
+extern void etrax_gpio_wake_up_check(void); /* Defined in drivers/gpio.c. */
+#endif
+
+extern int cris_hlt_counter;
+
+/* We use this if we don't have any better idle routine. */
+void default_idle(void)
+{
+ local_irq_disable();
+ if (!need_resched() && !cris_hlt_counter) {
+ /* Halt until exception. */
+ __asm__ volatile("ei \n\t"
+ "halt ");
+ }
+ local_irq_enable();
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+
+extern void deconfigure_bp(long pid);
+void exit_thread(void)
+{
+ deconfigure_bp(current->pid);
+}
+
+/*
+ * If the watchdog is enabled, disable interrupts and enter an infinite loop.
+ * The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled
+ * then enable it and wait.
+ */
+extern void arch_enable_nmi(void);
+
+void
+hard_reset_now(void)
+{
+ /*
+ * Don't declare this variable elsewhere. We don't want any other
+ * code to know about it than the watchdog handler in entry.S and
+ * this code, implementing hard reset through the watchdog.
+ */
+#if defined(CONFIG_ETRAX_WATCHDOG)
+ extern int cause_of_death;
+#endif
+
+ printk("*** HARD RESET ***\n");
+ local_irq_disable();
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+ cause_of_death = 0xbedead;
+#else
+{
+ reg_timer_rw_wd_ctrl wd_ctrl = {0};
+
+ stop_watchdog();
+
+ wd_ctrl.key = 16; /* Arbitrary key. */
+ wd_ctrl.cnt = 1; /* Minimum time. */
+ wd_ctrl.cmd = regk_timer_start;
+
+ arch_enable_nmi();
+ REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+}
+#endif
+
+ while (1)
+ ; /* Wait for reset. */
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *t)
+{
+ return (unsigned long)user_regs(t->thread_info)->erp;
+}
+
+static void
+kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg)
+{
+ fn(arg);
+ do_exit(-1); /* Should never be called, return bad exit value. */
+}
+
+/* Create a kernel thread. */
+int
+kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+
+ /* Don't use r10 since that is set to 0 in copy_thread. */
+ regs.r11 = (unsigned long) fn;
+ regs.r12 = (unsigned long) arg;
+ regs.erp = (unsigned long) kernel_thread_helper;
+ regs.ccs = 1 << (I_CCS_BITNR + CCS_SHIFT);
+
+ /* Create the new process. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
+}
+
+/*
+ * Setup the child's kernel stack with a pt_regs and call switch_stack() on it.
+ * It will be unnested during _resume and _ret_from_sys_call when the new thread
+ * is scheduled.
+ *
+ * Also setup the thread switching structure which is used to keep
+ * thread-specific data during _resumes.
+ */
+
+extern asmlinkage void ret_from_fork(void);
+
+int
+copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+ unsigned long unused,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs;
+ struct switch_stack *swstack;
+
+ /*
+ * Put the pt_regs structure at the end of the new kernel stack page and
+ * fix it up. Note: the task_struct doubles as the kernel stack for the
+ * task.
+ */
+ childregs = user_regs(p->thread_info);
+ *childregs = *regs; /* Struct copy of pt_regs. */
+ p->set_child_tid = p->clear_child_tid = NULL;
+ childregs->r10 = 0; /* Child returns 0 after a fork/clone. */
+
+ /* Set a new TLS ?
+ * The TLS is in $mof beacuse it is the 5th argument to sys_clone.
+ */
+ if (p->mm && (clone_flags & CLONE_SETTLS)) {
+ p->thread_info->tls = regs->mof;
+ }
+
+ /* Put the switch stack right below the pt_regs. */
+ swstack = ((struct switch_stack *) childregs) - 1;
+
+ /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */
+ swstack->r9 = 0;
+
+ /*
+ * We want to return into ret_from_sys_call after the _resume.
+ * ret_from_fork will call ret_from_sys_call.
+ */
+ swstack->return_ip = (unsigned long) ret_from_fork;
+
+ /* Fix the user-mode and kernel-mode stackpointer. */
+ p->thread.usp = usp;
+ p->thread.ksp = (unsigned long) swstack;
+
+ return 0;
+}
+
+/*
+ * Be aware of the "magic" 7th argument in the four system-calls below.
+ * They need the latest stackframe, which is put as the 7th argument by
+ * entry.S. The previous arguments are dummies or actually used, but need
+ * to be defined to reach the 7th argument.
+ *
+ * N.B.: Another method to get the stackframe is to use current_regs(). But
+ * it returns the latest stack-frame stacked when going from _user mode_ and
+ * some of these (at least sys_clone) are called from kernel-mode sometimes
+ * (for example during kernel_thread, above) and thus cannot use it. Thus,
+ * to be sure not to get any surprises, we use the method for the other calls
+ * as well.
+ */
+asmlinkage int
+sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
+}
+
+/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
+asmlinkage int
+sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid,
+ unsigned long tls, long srp, struct pt_regs *regs)
+{
+ if (!newusp)
+ newusp = rdusp();
+
+ return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
+}
+
+/*
+ * vfork is a system call in i386 because of register-pressure - maybe
+ * we can remove it and handle it in libc but we put it here until then.
+ */
+asmlinkage int
+sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
+}
+
+/* sys_execve() executes a new program. */
+asmlinkage int
+sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ int error;
+ char *filename;
+
+ filename = getname(fname);
+ error = PTR_ERR(filename);
+
+ if (IS_ERR(filename))
+ goto out;
+
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+ out:
+ return error;
+}
+
+unsigned long
+get_wchan(struct task_struct *p)
+{
+ /* TODO */
+ return 0;
+}
+#undef last_sched
+#undef first_sched
+
+void show_regs(struct pt_regs * regs)
+{
+ unsigned long usp = rdusp();
+ printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
+ regs->erp, regs->srp, regs->ccs, usp, regs->mof);
+
+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
+
+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
+
+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
+ regs->r8, regs->r9, regs->r10, regs->r11);
+
+ printk("r12: %08lx r13: %08lx oR10: %08lx\n",
+ regs->r12, regs->r13, regs->orig_r10);
+}
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
new file mode 100644
index 0000000..208489d
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -0,0 +1,597 @@
+/*
+ * Copyright (C) 2000-2003, Axis Communications AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+#include <linux/security.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/arch/hwregs/supp_reg.h>
+
+/*
+ * Determines which bits in CCS the user has access to.
+ * 1 = access, 0 = no access.
+ */
+#define CCS_MASK 0x00087c00 /* SXNZVC */
+
+#define SBIT_USER (1 << (S_CCS_BITNR + CCS_SHIFT))
+
+static int put_debugreg(long pid, unsigned int regno, long data);
+static long get_debugreg(long pid, unsigned int regno);
+static unsigned long get_pseudo_pc(struct task_struct *child);
+void deconfigure_bp(long pid);
+
+extern unsigned long cris_signal_return_page;
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+long get_reg(struct task_struct *task, unsigned int regno)
+{
+ /* USP is a special case, it's not in the pt_regs struct but
+ * in the tasks thread struct
+ */
+ unsigned long ret;
+
+ if (regno <= PT_EDA)
+ ret = ((unsigned long *)user_regs(task->thread_info))[regno];
+ else if (regno == PT_USP)
+ ret = task->thread.usp;
+ else if (regno == PT_PPC)
+ ret = get_pseudo_pc(task);
+ else if (regno <= PT_MAX)
+ ret = get_debugreg(task->pid, regno);
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+int put_reg(struct task_struct *task, unsigned int regno, unsigned long data)
+{
+ if (regno <= PT_EDA)
+ ((unsigned long *)user_regs(task->thread_info))[regno] = data;
+ else if (regno == PT_USP)
+ task->thread.usp = data;
+ else if (regno == PT_PPC) {
+ /* Write pseudo-PC to ERP only if changed. */
+ if (data != get_pseudo_pc(task))
+ ((unsigned long *)user_regs(task->thread_info))[PT_ERP] = data;
+ } else if (regno <= PT_MAX)
+ return put_debugreg(task->pid, regno, data);
+ else
+ return -1;
+ return 0;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching.
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable(struct task_struct *child)
+{
+ unsigned long tmp;
+
+ /* Deconfigure SPC and S-bit. */
+ tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+ put_reg(child, PT_CCS, tmp);
+ put_reg(child, PT_SPC, 0);
+
+ /* Deconfigure any watchpoints associated with the child. */
+ deconfigure_bp(child->pid);
+}
+
+
+asmlinkage int
+sys_ptrace(long request, long pid, long addr, long data)
+{
+ struct task_struct *child;
+ int ret;
+ unsigned long __user *datap = (unsigned long __user *)data;
+
+ lock_kernel();
+ ret = -EPERM;
+
+ if (request == PTRACE_TRACEME) {
+ /* are we already being traced? */
+ if (current->ptrace & PT_PTRACED)
+ goto out;
+ ret = security_ptrace(current->parent, current);
+ if (ret)
+ goto out;
+ /* set the ptrace bit in the process flags. */
+ current->ptrace |= PT_PTRACED;
+ ret = 0;
+ goto out;
+ }
+
+ ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ child = find_task_by_pid(pid);
+
+ if (child)
+ get_task_struct(child);
+
+ read_unlock(&tasklist_lock);
+
+ if (!child)
+ goto out;
+
+ ret = -EPERM;
+
+ if (pid == 1) /* Leave the init process alone! */
+ goto out_tsk;
+
+ if (request == PTRACE_ATTACH) {
+ ret = ptrace_attach(child);
+ goto out_tsk;
+ }
+
+ ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ if (ret < 0)
+ goto out_tsk;
+
+ switch (request) {
+ /* Read word at location address. */
+ case PTRACE_PEEKTEXT:
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ ret = -EIO;
+
+ /* The signal trampoline page is outside the normal user-addressable
+ * space but still accessible. This is hack to make it possible to
+ * access the signal handler code in GDB.
+ */
+ if ((addr & PAGE_MASK) == cris_signal_return_page) {
+ /* The trampoline page is globally mapped, no page table to traverse.*/
+ tmp = *(unsigned long*)addr;
+ } else {
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+
+ if (copied != sizeof(tmp))
+ break;
+ }
+
+ ret = put_user(tmp,datap);
+ break;
+ }
+
+ /* Read the word at location address in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+ break;
+
+ tmp = get_reg(child, addr >> 2);
+ ret = put_user(tmp, datap);
+ break;
+ }
+
+ /* Write the word at location address. */
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA:
+ ret = 0;
+
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+ break;
+
+ ret = -EIO;
+ break;
+
+ /* Write the word at location address in the USER area. */
+ case PTRACE_POKEUSR:
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+ break;
+
+ addr >>= 2;
+
+ if (addr == PT_CCS) {
+ /* don't allow the tracing process to change stuff like
+ * interrupt enable, kernel/user bit, dma enables etc.
+ */
+ data &= CCS_MASK;
+ data |= get_reg(child, PT_CCS) & ~CCS_MASK;
+ }
+ if (put_reg(child, addr, data))
+ break;
+ ret = 0;
+ break;
+
+ case PTRACE_SYSCALL:
+ case PTRACE_CONT:
+ ret = -EIO;
+
+ if (!valid_signal(data))
+ break;
+
+ /* Continue means no single-step. */
+ put_reg(child, PT_SPC, 0);
+
+ if (!get_debugreg(child->pid, PT_BP_CTRL)) {
+ unsigned long tmp;
+ /* If no h/w bp configured, disable S bit. */
+ tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+ put_reg(child, PT_CCS, tmp);
+ }
+
+ if (request == PTRACE_SYSCALL) {
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+ else {
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+
+ child->exit_code = data;
+
+ /* TODO: make sure any pending breakpoint is killed */
+ wake_up_process(child);
+ ret = 0;
+
+ break;
+
+ /* Make the child exit by sending it a sigkill. */
+ case PTRACE_KILL:
+ ret = 0;
+
+ if (child->exit_state == EXIT_ZOMBIE)
+ break;
+
+ child->exit_code = SIGKILL;
+
+ /* Deconfigure single-step and h/w bp. */
+ ptrace_disable(child);
+
+ /* TODO: make sure any pending breakpoint is killed */
+ wake_up_process(child);
+ break;
+
+ /* Set the trap flag. */
+ case PTRACE_SINGLESTEP: {
+ unsigned long tmp;
+ ret = -EIO;
+
+ /* Set up SPC if not set already (in which case we have
+ no other choice but to trust it). */
+ if (!get_reg(child, PT_SPC)) {
+ /* In case we're stopped in a delay slot. */
+ tmp = get_reg(child, PT_ERP) & ~1;
+ put_reg(child, PT_SPC, tmp);
+ }
+ tmp = get_reg(child, PT_CCS) | SBIT_USER;
+ put_reg(child, PT_CCS, tmp);
+
+ if (!valid_signal(data))
+ break;
+
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ /* TODO: set some clever breakpoint mechanism... */
+
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+ }
+ case PTRACE_DETACH:
+ ret = ptrace_detach(child, data);
+ break;
+
+ /* Get all GP registers from the child. */
+ case PTRACE_GETREGS: {
+ int i;
+ unsigned long tmp;
+
+ for (i = 0; i <= PT_MAX; i++) {
+ tmp = get_reg(child, i);
+
+ if (put_user(tmp, datap)) {
+ ret = -EFAULT;
+ goto out_tsk;
+ }
+
+ datap++;
+ }
+
+ ret = 0;
+ break;
+ }
+
+ /* Set all GP registers in the child. */
+ case PTRACE_SETREGS: {
+ int i;
+ unsigned long tmp;
+
+ for (i = 0; i <= PT_MAX; i++) {
+ if (get_user(tmp, datap)) {
+ ret = -EFAULT;
+ goto out_tsk;
+ }
+
+ if (i == PT_CCS) {
+ tmp &= CCS_MASK;
+ tmp |= get_reg(child, PT_CCS) & ~CCS_MASK;
+ }
+
+ put_reg(child, i, tmp);
+ datap++;
+ }
+
+ ret = 0;
+ break;
+ }
+
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+out_tsk:
+ put_task_struct(child);
+out:
+ unlock_kernel();
+ return ret;
+}
+
+void do_syscall_trace(void)
+{
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+
+ /*
+ * This isn't the same as continuing with a signal, but it will do for
+ * normal use.
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
+
+/* Returns the size of an instruction that has a delay slot. */
+
+static int insn_size(struct task_struct *child, unsigned long pc)
+{
+ unsigned long opcode;
+ int copied;
+ int opsize = 0;
+
+ /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */
+ copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0);
+ if (copied != sizeof(opcode))
+ return 0;
+
+ switch ((opcode & 0x0f00) >> 8) {
+ case 0x0:
+ case 0x9:
+ case 0xb:
+ opsize = 2;
+ break;
+ case 0xe:
+ case 0xf:
+ opsize = 6;
+ break;
+ case 0xd:
+ /* Could be 4 or 6; check more bits. */
+ if ((opcode & 0xff) == 0xff)
+ opsize = 4;
+ else
+ opsize = 6;
+ break;
+ default:
+ panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n",
+ opcode, pc);
+ }
+
+ return opsize;
+}
+
+static unsigned long get_pseudo_pc(struct task_struct *child)
+{
+ /* Default value for PC is ERP. */
+ unsigned long pc = get_reg(child, PT_ERP);
+
+ if (pc & 0x1) {
+ unsigned long spc = get_reg(child, PT_SPC);
+ /* Delay slot bit set. Report as stopped on proper
+ instruction. */
+ if (spc) {
+ /* Rely on SPC if set. FIXME: We might want to check
+ that EXS indicates we stopped due to a single-step
+ exception. */
+ pc = spc;
+ } else {
+ /* Calculate the PC from the size of the instruction
+ that the delay slot we're in belongs to. */
+ pc += insn_size(child, pc & ~1) - 1;
+ }
+ }
+ return pc;
+}
+
+static long bp_owner = 0;
+
+/* Reachable from exit_thread in signal.c, so not static. */
+void deconfigure_bp(long pid)
+{
+ int bp;
+
+ /* Only deconfigure if the pid is the owner. */
+ if (bp_owner != pid)
+ return;
+
+ for (bp = 0; bp < 6; bp++) {
+ unsigned long tmp;
+ /* Deconfigure start and end address (also gets rid of ownership). */
+ put_debugreg(pid, PT_BP + 3 + (bp * 2), 0);
+ put_debugreg(pid, PT_BP + 4 + (bp * 2), 0);
+
+ /* Deconfigure relevant bits in control register. */
+ tmp = get_debugreg(pid, PT_BP_CTRL) & ~(3 << (2 + (bp * 4)));
+ put_debugreg(pid, PT_BP_CTRL, tmp);
+ }
+ /* No owner now. */
+ bp_owner = 0;
+}
+
+static int put_debugreg(long pid, unsigned int regno, long data)
+{
+ int ret = 0;
+ register int old_srs;
+
+#ifdef CONFIG_ETRAX_KGDB
+ /* Ignore write, but pretend it was ok if value is 0
+ (we don't want POKEUSR/SETREGS failing unnessecarily). */
+ return (data == 0) ? ret : -1;
+#endif
+
+ /* Simple owner management. */
+ if (!bp_owner)
+ bp_owner = pid;
+ else if (bp_owner != pid) {
+ /* Ignore write, but pretend it was ok if value is 0
+ (we don't want POKEUSR/SETREGS failing unnessecarily). */
+ return (data == 0) ? ret : -1;
+ }
+
+ /* Remember old SRS. */
+ SPEC_REG_RD(SPEC_REG_SRS, old_srs);
+ /* Switch to BP bank. */
+ SUPP_BANK_SEL(BANK_BP);
+
+ switch (regno - PT_BP) {
+ case 0:
+ SUPP_REG_WR(0, data); break;
+ case 1:
+ case 2:
+ if (data)
+ ret = -1;
+ break;
+ case 3:
+ SUPP_REG_WR(3, data); break;
+ case 4:
+ SUPP_REG_WR(4, data); break;
+ case 5:
+ SUPP_REG_WR(5, data); break;
+ case 6:
+ SUPP_REG_WR(6, data); break;
+ case 7:
+ SUPP_REG_WR(7, data); break;
+ case 8:
+ SUPP_REG_WR(8, data); break;
+ case 9:
+ SUPP_REG_WR(9, data); break;
+ case 10:
+ SUPP_REG_WR(10, data); break;
+ case 11:
+ SUPP_REG_WR(11, data); break;
+ case 12:
+ SUPP_REG_WR(12, data); break;
+ case 13:
+ SUPP_REG_WR(13, data); break;
+ case 14:
+ SUPP_REG_WR(14, data); break;
+ default:
+ ret = -1;
+ break;
+ }
+
+ /* Restore SRS. */
+ SPEC_REG_WR(SPEC_REG_SRS, old_srs);
+ /* Just for show. */
+ NOP();
+ NOP();
+ NOP();
+
+ return ret;
+}
+
+static long get_debugreg(long pid, unsigned int regno)
+{
+ register int old_srs;
+ register long data;
+
+ if (pid != bp_owner) {
+ return 0;
+ }
+
+ /* Remember old SRS. */
+ SPEC_REG_RD(SPEC_REG_SRS, old_srs);
+ /* Switch to BP bank. */
+ SUPP_BANK_SEL(BANK_BP);
+
+ switch (regno - PT_BP) {
+ case 0:
+ SUPP_REG_RD(0, data); break;
+ case 1:
+ case 2:
+ /* error return value? */
+ data = 0;
+ break;
+ case 3:
+ SUPP_REG_RD(3, data); break;
+ case 4:
+ SUPP_REG_RD(4, data); break;
+ case 5:
+ SUPP_REG_RD(5, data); break;
+ case 6:
+ SUPP_REG_RD(6, data); break;
+ case 7:
+ SUPP_REG_RD(7, data); break;
+ case 8:
+ SUPP_REG_RD(8, data); break;
+ case 9:
+ SUPP_REG_RD(9, data); break;
+ case 10:
+ SUPP_REG_RD(10, data); break;
+ case 11:
+ SUPP_REG_RD(11, data); break;
+ case 12:
+ SUPP_REG_RD(12, data); break;
+ case 13:
+ SUPP_REG_RD(13, data); break;
+ case 14:
+ SUPP_REG_RD(14, data); break;
+ default:
+ /* error return value? */
+ data = 0;
+ }
+
+ /* Restore SRS. */
+ SPEC_REG_WR(SPEC_REG_SRS, old_srs);
+ /* Just for show. */
+ NOP();
+ NOP();
+ NOP();
+
+ return data;
+}
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c
new file mode 100644
index 0000000..b17a39a
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/setup.c
@@ -0,0 +1,118 @@
+/*
+ * Display CPU info in /proc/cpuinfo.
+ *
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+
+#ifdef CONFIG_PROC_FS
+
+#define HAS_FPU 0x0001
+#define HAS_MMU 0x0002
+#define HAS_ETHERNET100 0x0004
+#define HAS_TOKENRING 0x0008
+#define HAS_SCSI 0x0010
+#define HAS_ATA 0x0020
+#define HAS_USB 0x0040
+#define HAS_IRQ_BUG 0x0080
+#define HAS_MMU_BUG 0x0100
+
+struct cpu_info {
+ char *cpu_model;
+ unsigned short rev;
+ unsigned short cache_size;
+ unsigned short flags;
+};
+
+/* Some of these model are here for historical reasons only. */
+static struct cpu_info cpinfo[] = {
+ {"ETRAX 1", 0, 0, 0},
+ {"ETRAX 2", 1, 0, 0},
+ {"ETRAX 3", 2, 0, 0},
+ {"ETRAX 4", 3, 0, 0},
+ {"Simulator", 7, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA},
+ {"ETRAX 100", 8, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG},
+ {"ETRAX 100", 9, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA},
+
+ {"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
+ | HAS_MMU | HAS_MMU_BUG},
+
+ {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
+ | HAS_MMU},
+
+ {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
+
+ {"Unknown", 0, 0, 0}
+};
+
+int
+show_cpuinfo(struct seq_file *m, void *v)
+{
+ int i;
+ int cpu = (int)v - 1;
+ int entries;
+ unsigned long revision;
+ struct cpu_info *info;
+
+ entries = sizeof cpinfo / sizeof(struct cpu_info);
+ info = &cpinfo[entries - 1];
+
+#ifdef CONFIG_SMP
+ if (!cpu_online(cpu))
+ return 0;
+#endif
+
+ revision = rdvr();
+
+ for (i = 0; i < entries; i++) {
+ if (cpinfo[i].rev == revision) {
+ info = &cpinfo[i];
+ break;
+ }
+ }
+
+ return seq_printf(m,
+ "processor\t: %d\n"
+ "cpu\t\t: CRIS\n"
+ "cpu revision\t: %lu\n"
+ "cpu model\t: %s\n"
+ "cache size\t: %d KB\n"
+ "fpu\t\t: %s\n"
+ "mmu\t\t: %s\n"
+ "mmu DMA bug\t: %s\n"
+ "ethernet\t: %s Mbps\n"
+ "token ring\t: %s\n"
+ "scsi\t\t: %s\n"
+ "ata\t\t: %s\n"
+ "usb\t\t: %s\n"
+ "bogomips\t: %lu.%02lu\n\n",
+
+ cpu,
+ revision,
+ info->cpu_model,
+ info->cache_size,
+ info->flags & HAS_FPU ? "yes" : "no",
+ info->flags & HAS_MMU ? "yes" : "no",
+ info->flags & HAS_MMU_BUG ? "yes" : "no",
+ info->flags & HAS_ETHERNET100 ? "10/100" : "10",
+ info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no",
+ info->flags & HAS_SCSI ? "yes" : "no",
+ info->flags & HAS_ATA ? "yes" : "no",
+ info->flags & HAS_USB ? "yes" : "no",
+ (loops_per_jiffy * HZ + 500) / 500000,
+ ((loops_per_jiffy * HZ + 500) / 5000) % 100);
+}
+
+#endif /* CONFIG_PROC_FS */
+
+void
+show_etrax_copyright(void)
+{
+ printk(KERN_INFO
+ "Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n");
+}
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
new file mode 100644
index 0000000..fb4c79d
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -0,0 +1,708 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/syscalls.h>
+#include <linux/vmalloc.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/arch/ptrace.h>
+#include <asm/arch/hwregs/cpu_vect.h>
+
+extern unsigned long cris_signal_return_page;
+
+/* Flag to check if a signal is blockable. */
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * A syscall in CRIS is really a "break 13" instruction, which is 2
+ * bytes. The registers is manipulated so upon return the instruction
+ * will be executed again.
+ *
+ * This relies on that PC points to the instruction after the break call.
+ */
+#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->erp -= 2;
+
+/* Signal frames. */
+struct signal_frame {
+ struct sigcontext sc;
+ unsigned long extramask[_NSIG_WORDS - 1];
+ unsigned char retcode[8]; /* Trampoline code. */
+};
+
+struct rt_signal_frame {
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ unsigned char retcode[8]; /* Trampoline code. */
+};
+
+int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs);
+void keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
+ struct pt_regs *regs);
+/*
+ * Swap in the new signal mask, and wait for a signal. Define some
+ * dummy arguments to be able to reach the regs argument.
+ */
+int
+sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
+ long srp, struct pt_regs *regs)
+{
+ sigset_t saveset;
+
+ mask &= _BLOCKABLE;
+
+ spin_lock_irq(¤t->sighand->siglock);
+
+ saveset = current->blocked;
+
+ siginitset(¤t->blocked, mask);
+
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ regs->r10 = -EINTR;
+
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+
+ if (do_signal(0, &saveset, regs)) {
+ /*
+ * This point is reached twice: once to call
+ * the signal handler, then again to return
+ * from the sigsuspend system call. When
+ * calling the signal handler, R10 hold the
+ * signal number as set by do_signal(). The
+ * sigsuspend call will always return with
+ * the restored value above; -EINTR.
+ */
+ return regs->r10;
+ }
+ }
+}
+
+/* Define some dummy arguments to be able to reach the regs argument. */
+int
+sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
+ long mof, long srp, struct pt_regs *regs)
+{
+ sigset_t saveset;
+ sigset_t newset;
+
+ if (sigsetsize != sizeof(sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&newset, unewset, sizeof(newset)))
+ return -EFAULT;
+
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+
+ saveset = current->blocked;
+ current->blocked = newset;
+
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ regs->r10 = -EINTR;
+
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+
+ if (do_signal(0, &saveset, regs)) {
+ /* See comment in function above. */
+ return regs->r10;
+ }
+ }
+}
+
+int
+sys_sigaction(int signal, const struct old_sigaction *act,
+ struct old_sigaction *oact)
+{
+ int retval;
+ struct k_sigaction newk;
+ struct k_sigaction oldk;
+
+ if (act) {
+ old_sigset_t mask;
+
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(newk.sa.sa_handler, &act->sa_handler) ||
+ __get_user(newk.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+
+ __get_user(newk.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&newk.sa.sa_mask, mask);
+ }
+
+ retval = do_sigaction(signal, act ? &newk : NULL, oact ? &oldk : NULL);
+
+ if (!retval && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(oldk.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(oldk.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+
+ __put_user(oldk.sa.sa_flags, &oact->sa_flags);
+ __put_user(oldk.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return retval;
+}
+
+int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+{
+ return do_sigaltstack(uss, uoss, rdusp());
+}
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+ unsigned int err = 0;
+ unsigned long old_usp;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ /*
+ * Restore the registers from &sc->regs. sc is already checked
+ * for VERIFY_READ since the signal_frame was previously
+ * checked in sys_sigreturn().
+ */
+ if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
+ goto badframe;
+
+ /* Make that the user-mode flag is set. */
+ regs->ccs |= (1 << (U_CCS_BITNR + CCS_SHIFT));
+
+ /* Restore the old USP. */
+ err |= __get_user(old_usp, &sc->usp);
+ wrusp(old_usp);
+
+ return err;
+
+badframe:
+ return 1;
+}
+
+/* Define some dummy arguments to be able to reach the regs argument. */
+asmlinkage int
+sys_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ sigset_t set;
+ struct signal_frame __user *frame;
+ unsigned long oldspc = regs->spc;
+ unsigned long oldccs = regs->ccs;
+
+ frame = (struct signal_frame *) rdusp();
+
+ /*
+ * Since the signal is stacked on a dword boundary, the frame
+ * should be dword aligned here as well. It it's not, then the
+ * user is trying some funny business.
+ */
+ if (((long)frame) & 3)
+ goto badframe;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__get_user(set.sig[0], &frame->sc.oldmask) ||
+ (_NSIG_WORDS > 1 && __copy_from_user(&set.sig[1],
+ frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+
+ current->blocked = set;
+
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->sc))
+ goto badframe;
+
+ keep_debug_flags(oldccs, oldspc, regs);
+
+ return regs->r10;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/* Define some dummy variables to be able to reach the regs argument. */
+asmlinkage int
+sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ sigset_t set;
+ struct rt_signal_frame __user *frame;
+ unsigned long oldspc = regs->spc;
+ unsigned long oldccs = regs->ccs;
+
+ frame = (struct rt_signal_frame *) rdusp();
+
+ /*
+ * Since the signal is stacked on a dword boundary, the frame
+ * should be dword aligned here as well. It it's not, then the
+ * user is trying some funny business.
+ */
+ if (((long)frame) & 3)
+ goto badframe;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+
+ current->blocked = set;
+
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
+ goto badframe;
+
+ keep_debug_flags(oldccs, oldspc, regs);
+
+ return regs->r10;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/* Setup a signal frame. */
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+ unsigned long mask)
+{
+ int err;
+ unsigned long usp;
+
+ err = 0;
+ usp = rdusp();
+
+ /*
+ * Copy the registers. They are located first in sc, so it's
+ * possible to use sc directly.
+ */
+ err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
+
+ err |= __put_user(mask, &sc->oldmask);
+ err |= __put_user(usp, &sc->usp);
+
+ return err;
+}
+
+/* Figure out where to put the new signal frame - usually on the stack. */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+ unsigned long sp;
+
+ sp = rdusp();
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ /* Make sure the frame is dword-aligned. */
+ sp &= ~3;
+
+ return (void __user *)(sp - frame_size);
+}
+
+/* Grab and setup a signal frame.
+ *
+ * Basically a lot of state-info is stacked, and arranged for the
+ * user-mode program to return to the kernel using either a trampiline
+ * which performs the syscall sigreturn(), or a provided user-mode
+ * trampoline.
+ */
+static void
+setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+ struct pt_regs * regs)
+{
+ int err;
+ unsigned long return_ip;
+ struct signal_frame __user *frame;
+
+ err = 0;
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+ if (err)
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ err |= __copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask));
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /*
+ * Set up to return from user-space. If provided, use a stub
+ * already located in user-space.
+ */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ return_ip = (unsigned long)ka->sa.sa_restorer;
+ } else {
+ /* Trampoline - the desired return ip is in the signal return page. */
+ return_ip = cris_signal_return_page;
+
+ /*
+ * This is movu.w __NR_sigreturn, r9; break 13;
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
+ err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2));
+ err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /*
+ * Set up registers for signal handler.
+ *
+ * Where the code enters now.
+ * Where the code enter later.
+ * First argument, signo.
+ */
+ regs->erp = (unsigned long) ka->sa.sa_handler;
+ regs->srp = return_ip;
+ regs->r10 = sig;
+
+ /* Actually move the USP to reflect the stacked frame. */
+ wrusp((unsigned long)frame);
+
+ return;
+
+give_sigsegv:
+ if (sig == SIGSEGV)
+ ka->sa.sa_handler = SIG_DFL;
+
+ force_sig(SIGSEGV, current);
+}
+
+static void
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs * regs)
+{
+ int err;
+ unsigned long return_ip;
+ struct rt_signal_frame __user *frame;
+
+ err = 0;
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ /* TODO: what is the current->exec_domain stuff and invmap ? */
+
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Clear all the bits of the ucontext we don't use. */
+ err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ if (err)
+ goto give_sigsegv;
+
+ /*
+ * Set up to return from user-space. If provided, use a stub
+ * already located in user-space.
+ */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ return_ip = (unsigned long) ka->sa.sa_restorer;
+ } else {
+ /* Trampoline - the desired return ip is in the signal return page. */
+ return_ip = cris_signal_return_page + 6;
+
+ /*
+ * This is movu.w __NR_rt_sigreturn, r9; break 13;
+ *
+ * WE DO NOT USE IT ANY MORE! It's only left here for historical
+ * reasons and because gdb uses it as a signature to notice
+ * signal handler stack frames.
+ */
+ err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
+
+ err |= __put_user(__NR_rt_sigreturn,
+ (short __user*)(frame->retcode+2));
+
+ err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /*
+ * Set up registers for signal handler.
+ *
+ * Where the code enters now.
+ * Where the code enters later.
+ * First argument is signo.
+ * Second argument is (siginfo_t *).
+ * Third argument is unused.
+ */
+ regs->erp = (unsigned long) ka->sa.sa_handler;
+ regs->srp = return_ip;
+ regs->r10 = sig;
+ regs->r11 = (unsigned long) &frame->info;
+ regs->r12 = 0;
+
+ /* Actually move the usp to reflect the stacked frame. */
+ wrusp((unsigned long)frame);
+
+ return;
+
+give_sigsegv:
+ if (sig == SIGSEGV)
+ ka->sa.sa_handler = SIG_DFL;
+
+ force_sig(SIGSEGV, current);
+}
+
+/* Invoke a singal handler to, well, handle the signal. */
+extern inline void
+handle_signal(int canrestart, unsigned long sig,
+ siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs * regs)
+{
+ /* Check if this got called from a system call. */
+ if (canrestart) {
+ /* If so, check system call restarting. */
+ switch (regs->r10) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ /*
+ * This means that the syscall should
+ * only be restarted if there was no
+ * handler for the signal, and since
+ * this point isn't reached unless
+ * there is a handler, there's no need
+ * to restart.
+ */
+ regs->r10 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ /*
+ * This means restart the syscall if
+ * there is no handler, or the handler
+ * was registered with SA_RESTART.
+ */
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r10 = -EINTR;
+ break;
+ }
+
+ /* Fall through. */
+
+ case -ERESTARTNOINTR:
+ /*
+ * This means that the syscall should
+ * be called again after the signal
+ * handler returns.
+ */
+ RESTART_CRIS_SYS(regs);
+ break;
+ }
+ }
+
+ /* Set up the stack frame. */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ setup_frame(sig, ka, oldset, regs);
+
+ if (ka->sa.sa_flags & SA_ONESHOT)
+ ka->sa.sa_handler = SIG_DFL;
+
+ if (!(ka->sa.sa_flags & SA_NODEFER)) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigaddset(¤t->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Also note that the regs structure given here as an argument, is the latest
+ * pushed pt_regs. It may or may not be the same as the first pushed registers
+ * when the initial usermode->kernelmode transition took place. Therefore
+ * we can use user_mode(regs) to see if we came directly from kernel or user
+ * mode below.
+ */
+int
+do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
+{
+ int signr;
+ siginfo_t info;
+ struct k_sigaction ka;
+
+ /*
+ * The common case should go fast, which is why this point is
+ * reached from kernel-mode. If that's the case, just return
+ * without doing anything.
+ */
+ if (!user_mode(regs))
+ return 1;
+
+ if (!oldset)
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+ if (signr > 0) {
+ /* Deliver the signal. */
+ handle_signal(canrestart, signr, &info, &ka, oldset, regs);
+ return 1;
+ }
+
+ /* Got here from a system call? */
+ if (canrestart) {
+ /* Restart the system call - no handlers present. */
+ if (regs->r10 == -ERESTARTNOHAND ||
+ regs->r10 == -ERESTARTSYS ||
+ regs->r10 == -ERESTARTNOINTR) {
+ RESTART_CRIS_SYS(regs);
+ }
+
+ if (regs->r10 == -ERESTART_RESTARTBLOCK){
+ regs->r10 = __NR_restart_syscall;
+ regs->erp -= 2;
+ }
+ }
+
+ return 0;
+}
+
+asmlinkage void
+ugdb_trap_user(struct thread_info *ti, int sig)
+{
+ if (((user_regs(ti)->exs & 0xff00) >> 8) != SINGLE_STEP_INTR_VECT) {
+ /* Zero single-step PC if the reason we stopped wasn't a single
+ step exception. This is to avoid relying on it when it isn't
+ reliable. */
+ user_regs(ti)->spc = 0;
+ }
+ /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
+ not withing any configured h/w breakpoint range). Synchronize with
+ what already exists for kernel debugging. */
+ if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
+ /* Break 8: subtract 2 from ERP unless in a delay slot. */
+ if (!(user_regs(ti)->erp & 0x1))
+ user_regs(ti)->erp -= 2;
+ }
+ sys_kill(ti->task->pid, sig);
+}
+
+void
+keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
+ struct pt_regs *regs)
+{
+ if (oldccs & (1 << Q_CCS_BITNR)) {
+ /* Pending single step due to single-stepping the break 13
+ in the signal trampoline: keep the Q flag. */
+ regs->ccs |= (1 << Q_CCS_BITNR);
+ /* S flag should be set - complain if it's not. */
+ if (!(oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT)))) {
+ printk("Q flag but no S flag?");
+ }
+ regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
+ /* Assume the SPC is valid and interesting. */
+ regs->spc = oldspc;
+
+ } else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) {
+ /* If a h/w bp was set in the signal handler we need
+ to keep the S flag. */
+ regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
+ /* Don't keep the old SPC though; if we got here due to
+ a single-step, the Q flag should have been set. */
+ } else if (regs->spc) {
+ /* If we were single-stepping *before* the signal was taken,
+ we don't want to restore that state now, because GDB will
+ have forgotten all about it. */
+ regs->spc = 0;
+ regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
+ }
+}
+
+/* Set up the trampolines on the signal return page. */
+int __init
+cris_init_signal(void)
+{
+ u16* data = (u16*)kmalloc(PAGE_SIZE, GFP_KERNEL);
+
+ /* This is movu.w __NR_sigreturn, r9; break 13; */
+ data[0] = 0x9c5f;
+ data[1] = __NR_sigreturn;
+ data[2] = 0xe93d;
+ /* This is movu.w __NR_rt_sigreturn, r9; break 13; */
+ data[3] = 0x9c5f;
+ data[4] = __NR_rt_sigreturn;
+ data[5] = 0xe93d;
+
+ /* Map to userspace with appropriate permissions (no write access...) */
+ cris_signal_return_page = (unsigned long)
+ __ioremap_prot(virt_to_phys(data), PAGE_SIZE, PAGE_SIGNAL_TRAMPOLINE);
+
+ return 0;
+}
+
+__initcall(cris_init_signal);
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
new file mode 100644
index 0000000..2c5cae0
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -0,0 +1,348 @@
+#include <asm/delay.h>
+#include <asm/arch/irq.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/arch/hwregs/mmu_defs_asm.h>
+#include <asm/arch/hwregs/supp_reg.h>
+#include <asm/atomic.h>
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#define IPI_SCHEDULE 1
+#define IPI_CALL 2
+#define IPI_FLUSH_TLB 4
+
+#define FLUSH_ALL (void*)0xffffffff
+
+/* Vector of locks used for various atomic operations */
+spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED};
+
+/* CPU masks */
+cpumask_t cpu_online_map = CPU_MASK_NONE;
+cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+
+/* Variables used during SMP boot */
+volatile int cpu_now_booting = 0;
+volatile struct thread_info *smp_init_current_idle_thread;
+
+/* Variables used during IPI */
+static DEFINE_SPINLOCK(call_lock);
+static DEFINE_SPINLOCK(tlbstate_lock);
+
+struct call_data_struct {
+ void (*func) (void *info);
+ void *info;
+ int wait;
+};
+
+static struct call_data_struct * call_data;
+
+static struct mm_struct* flush_mm;
+static struct vm_area_struct* flush_vma;
+static unsigned long flush_addr;
+
+extern int setup_irq(int, struct irqaction *);
+
+/* Mode registers */
+static unsigned long irq_regs[NR_CPUS] =
+{
+ regi_irq,
+ regi_irq2
+};
+
+static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int send_ipi(int vector, int wait, cpumask_t cpu_mask);
+static struct irqaction irq_ipi = { crisv32_ipi_interrupt, SA_INTERRUPT,
+ CPU_MASK_NONE, "ipi", NULL, NULL};
+
+extern void cris_mmu_init(void);
+extern void cris_timer_init(void);
+
+/* SMP initialization */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ /* From now on we can expect IPIs so set them up */
+ setup_irq(IPI_INTR_VECT, &irq_ipi);
+
+ /* Mark all possible CPUs as present */
+ for (i = 0; i < max_cpus; i++)
+ cpu_set(i, phys_cpu_present_map);
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+ /* PGD pointer has moved after per_cpu initialization so
+ * update the MMU.
+ */
+ pgd_t **pgd;
+ pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id());
+
+ SUPP_BANK_SEL(1);
+ SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
+ SUPP_BANK_SEL(2);
+ SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
+
+ cpu_set(0, cpu_online_map);
+ cpu_set(0, phys_cpu_present_map);
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+/* Bring one cpu online.*/
+static int __init
+smp_boot_one_cpu(int cpuid)
+{
+ unsigned timeout;
+ struct task_struct *idle;
+
+ idle = fork_idle(cpuid);
+ if (IS_ERR(idle))
+ panic("SMP: fork failed for CPU:%d", cpuid);
+
+ idle->thread_info->cpu = cpuid;
+
+ /* Information to the CPU that is about to boot */
+ smp_init_current_idle_thread = idle->thread_info;
+ cpu_now_booting = cpuid;
+
+ /* Wait for CPU to come online */
+ for (timeout = 0; timeout < 10000; timeout++) {
+ if(cpu_online(cpuid)) {
+ cpu_now_booting = 0;
+ smp_init_current_idle_thread = NULL;
+ return 0; /* CPU online */
+ }
+ udelay(100);
+ barrier();
+ }
+
+ put_task_struct(idle);
+ idle = NULL;
+
+ printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid);
+ return -1;
+}
+
+/* Secondary CPUs starts uing C here. Here we need to setup CPU
+ * specific stuff such as the local timer and the MMU. */
+void __init smp_callin(void)
+{
+ extern void cpu_idle(void);
+
+ int cpu = cpu_now_booting;
+ reg_intr_vect_rw_mask vect_mask = {0};
+
+ /* Initialise the idle task for this CPU */
+ atomic_inc(&init_mm.mm_count);
+ current->active_mm = &init_mm;
+
+ /* Set up MMU */
+ cris_mmu_init();
+ __flush_tlb_all();
+
+ /* Setup local timer. */
+ cris_timer_init();
+
+ /* Enable IRQ and idle */
+ REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
+ unmask_irq(IPI_INTR_VECT);
+ unmask_irq(TIMER_INTR_VECT);
+ local_irq_enable();
+
+ cpu_set(cpu, cpu_online_map);
+ cpu_idle();
+}
+
+/* Stop execution on this CPU.*/
+void stop_this_cpu(void* dummy)
+{
+ local_irq_disable();
+ asm volatile("halt");
+}
+
+/* Other calls */
+void smp_send_stop(void)
+{
+ smp_call_function(stop_this_cpu, NULL, 1, 0);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+ return -EINVAL;
+}
+
+
+/* cache_decay_ticks is used by the scheduler to decide if a process
+ * is "hot" on one CPU. A higher value means a higher penalty to move
+ * a process to another CPU. Our cache is rather small so we report
+ * 1 tick.
+ */
+unsigned long cache_decay_ticks = 1;
+
+int __devinit __cpu_up(unsigned int cpu)
+{
+ smp_boot_one_cpu(cpu);
+ return cpu_online(cpu) ? 0 : -ENOSYS;
+}
+
+void smp_send_reschedule(int cpu)
+{
+ cpumask_t cpu_mask = CPU_MASK_NONE;
+ cpu_set(cpu, cpu_mask);
+ send_ipi(IPI_SCHEDULE, 0, cpu_mask);
+}
+
+/* TLB flushing
+ *
+ * Flush needs to be done on the local CPU and on any other CPU that
+ * may have the same mapping. The mm->cpu_vm_mask is used to keep track
+ * of which CPUs that a specific process has been executed on.
+ */
+void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr)
+{
+ unsigned long flags;
+ cpumask_t cpu_mask;
+
+ spin_lock_irqsave(&tlbstate_lock, flags);
+ cpu_mask = (mm == FLUSH_ALL ? CPU_MASK_ALL : mm->cpu_vm_mask);
+ cpu_clear(smp_processor_id(), cpu_mask);
+ flush_mm = mm;
+ flush_vma = vma;
+ flush_addr = addr;
+ send_ipi(IPI_FLUSH_TLB, 1, cpu_mask);
+ spin_unlock_irqrestore(&tlbstate_lock, flags);
+}
+
+void flush_tlb_all(void)
+{
+ __flush_tlb_all();
+ flush_tlb_common(FLUSH_ALL, FLUSH_ALL, 0);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ __flush_tlb_mm(mm);
+ flush_tlb_common(mm, FLUSH_ALL, 0);
+ /* No more mappings in other CPUs */
+ cpus_clear(mm->cpu_vm_mask);
+ cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ __flush_tlb_page(vma, addr);
+ flush_tlb_common(vma->vm_mm, vma, addr);
+}
+
+/* Inter processor interrupts
+ *
+ * The IPIs are used for:
+ * * Force a schedule on a CPU
+ * * FLush TLB on other CPUs
+ * * Call a function on other CPUs
+ */
+
+int send_ipi(int vector, int wait, cpumask_t cpu_mask)
+{
+ int i = 0;
+ reg_intr_vect_rw_ipi ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi);
+ int ret = 0;
+
+ /* Calculate CPUs to send to. */
+ cpus_and(cpu_mask, cpu_mask, cpu_online_map);
+
+ /* Send the IPI. */
+ for_each_cpu_mask(i, cpu_mask)
+ {
+ ipi.vector |= vector;
+ REG_WR(intr_vect, irq_regs[i], rw_ipi, ipi);
+ }
+
+ /* Wait for IPI to finish on other CPUS */
+ if (wait) {
+ for_each_cpu_mask(i, cpu_mask) {
+ int j;
+ for (j = 0 ; j < 1000; j++) {
+ ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi);
+ if (!ipi.vector)
+ break;
+ udelay(100);
+ }
+
+ /* Timeout? */
+ if (ipi.vector) {
+ printk("SMP call timeout from %d to %d\n", smp_processor_id(), i);
+ ret = -ETIMEDOUT;
+ dump_stack();
+ }
+ }
+ }
+ return ret;
+}
+
+/*
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function(void (*func)(void *info), void *info,
+ int nonatomic, int wait)
+{
+ cpumask_t cpu_mask = CPU_MASK_ALL;
+ struct call_data_struct data;
+ int ret;
+
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ WARN_ON(irqs_disabled());
+
+ data.func = func;
+ data.info = info;
+ data.wait = wait;
+
+ spin_lock(&call_lock);
+ call_data = &data;
+ ret = send_ipi(IPI_CALL, wait, cpu_mask);
+ spin_unlock(&call_lock);
+
+ return ret;
+}
+
+irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ void (*func) (void *info) = call_data->func;
+ void *info = call_data->info;
+ reg_intr_vect_rw_ipi ipi;
+
+ ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi);
+
+ if (ipi.vector & IPI_CALL) {
+ func(info);
+ }
+ if (ipi.vector & IPI_FLUSH_TLB) {
+ if (flush_mm == FLUSH_ALL)
+ __flush_tlb_all();
+ else if (flush_vma == FLUSH_ALL)
+ __flush_tlb_mm(flush_mm);
+ else
+ __flush_tlb_page(flush_vma, flush_addr);
+ }
+
+ ipi.vector = 0;
+ REG_WR(intr_vect, irq_regs[smp_processor_id()], rw_ipi, ipi);
+
+ return IRQ_HANDLED;
+}
+
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
new file mode 100644
index 0000000..d48e397
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -0,0 +1,341 @@
+/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $
+ *
+ * linux/arch/cris/arch-v32/kernel/time.c
+ *
+ * Copyright (C) 2003 Axis Communications AB
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/swap.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/rtc.h>
+#include <asm/irq.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+/* Watchdog defines */
+#define ETRAX_WD_KEY_MASK 0x7F /* key is 7 bit */
+#define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */
+#define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */
+
+unsigned long timer_regs[NR_CPUS] =
+{
+ regi_timer,
+#ifdef CONFIG_SMP
+ regi_timer2
+#endif
+};
+
+extern void update_xtime_from_cmos(void);
+extern int set_rtc_mmss(unsigned long nowtime);
+extern int setup_irq(int, struct irqaction *);
+extern int have_rtc;
+
+unsigned long get_ns_in_jiffie(void)
+{
+ reg_timer_r_tmr0_data data;
+ unsigned long ns;
+
+ data = REG_RD(timer, regi_timer, r_tmr0_data);
+ ns = (TIMER0_DIV - data) * 10;
+ return ns;
+}
+
+unsigned long do_slow_gettimeoffset(void)
+{
+ unsigned long count;
+ unsigned long usec_count = 0;
+
+ static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
+ static unsigned long jiffies_p = 0;
+
+ /*
+ * cache volatile jiffies temporarily; we have IRQs turned off.
+ */
+ unsigned long jiffies_t;
+
+ /* The timer interrupt comes from Etrax timer 0. In order to get
+ * better precision, we check the current value. It might have
+ * underflowed already though.
+ */
+
+ count = REG_RD(timer, regi_timer, r_tmr0_data);
+ jiffies_t = jiffies;
+
+ /*
+ * avoiding timer inconsistencies (they are rare, but they happen)...
+ * there are one problem that must be avoided here:
+ * 1. the timer counter underflows
+ */
+ if( jiffies_t == jiffies_p ) {
+ if( count > count_p ) {
+ /* Timer wrapped, use new count and prescale
+ * increase the time corresponding to one jiffie
+ */
+ usec_count = 1000000/HZ;
+ }
+ } else
+ jiffies_p = jiffies_t;
+ count_p = count;
+ /* Convert timer value to usec */
+ /* 100 MHz timer, divide by 100 to get usec */
+ usec_count += (TIMER0_DIV - count) / 100;
+ return usec_count;
+}
+
+/* From timer MDS describing the hardware watchdog:
+ * 4.3.1 Watchdog Operation
+ * The watchdog timer is an 8-bit timer with a configurable start value.
+ * Once started the whatchdog counts downwards with a frequency of 763 Hz
+ * (100/131072 MHz). When the watchdog counts down to 1, it generates an
+ * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
+ * chip.
+ */
+/* This gives us 1.3 ms to do something useful when the NMI comes */
+
+/* right now, starting the watchdog is the same as resetting it */
+#define start_watchdog reset_watchdog
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+static short int watchdog_key = 42; /* arbitrary 7 bit number */
+#endif
+
+/* number of pages to consider "out of memory". it is normal that the memory
+ * is used though, so put this really low.
+ */
+
+#define WATCHDOG_MIN_FREE_PAGES 8
+
+void
+reset_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+ reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
+
+ /* only keep watchdog happy as long as we have memory left! */
+ if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
+ /* reset the watchdog with the inverse of the old key */
+ watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */
+ wd_ctrl.cnt = ETRAX_WD_CNT;
+ wd_ctrl.cmd = regk_timer_start;
+ wd_ctrl.key = watchdog_key;
+ REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+ }
+#endif
+}
+
+/* stop the watchdog - we still need the correct key */
+
+void
+stop_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+ reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
+ watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */
+ wd_ctrl.cnt = ETRAX_WD_CNT;
+ wd_ctrl.cmd = regk_timer_stop;
+ wd_ctrl.key = watchdog_key;
+ REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+#endif
+}
+
+extern void show_registers(struct pt_regs *regs);
+
+void
+handle_watchdog_bite(struct pt_regs* regs)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+ extern int cause_of_death;
+
+ raw_printk("Watchdog bite\n");
+
+ /* Check if forced restart or unexpected watchdog */
+ if (cause_of_death == 0xbedead) {
+ while(1);
+ }
+
+ /* Unexpected watchdog, stop the watchdog and dump registers*/
+ stop_watchdog();
+ raw_printk("Oops: bitten by watchdog\n");
+ show_registers(regs);
+#ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ reset_watchdog();
+#endif
+ while(1) /* nothing */;
+#endif
+}
+
+/* last time the cmos clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+
+//static unsigned short myjiff; /* used by our debug routine print_timestamp */
+
+extern void cris_do_profile(struct pt_regs *regs);
+
+static inline irqreturn_t
+timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ reg_timer_r_masked_intr masked_intr;
+ reg_timer_rw_ack_intr ack_intr = { 0 };
+
+ /* Check if the timer interrupt is for us (a tmr0 int) */
+ masked_intr = REG_RD(timer, timer_regs[cpu], r_masked_intr);
+ if (!masked_intr.tmr0)
+ return IRQ_NONE;
+
+ /* acknowledge the timer irq */
+ ack_intr.tmr0 = 1;
+ REG_WR(timer, timer_regs[cpu], rw_ack_intr, ack_intr);
+
+ /* reset watchdog otherwise it resets us! */
+ reset_watchdog();
+
+ /* Update statistics. */
+ update_process_times(user_mode(regs));
+
+ cris_do_profile(regs); /* Save profiling information */
+
+ /* The master CPU is responsible for the time keeping. */
+ if (cpu != 0)
+ return IRQ_HANDLED;
+
+ /* call the real timer interrupt handler */
+ do_timer(regs);
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ *
+ * The division here is not time critical since it will run once in
+ * 11 minutes
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+ }
+ return IRQ_HANDLED;
+}
+
+/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain
+ * it needs to be SA_INTERRUPT to make the jiffies update work properly
+ */
+
+static struct irqaction irq_timer = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
+ CPU_MASK_NONE, "timer", NULL, NULL};
+
+void __init
+cris_timer_init(void)
+{
+ int cpu = smp_processor_id();
+ reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
+ reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV;
+ reg_timer_rw_intr_mask timer_intr_mask;
+
+ /* Setup the etrax timers
+ * Base frequency is 100MHz, divider 1000000 -> 100 HZ
+ * We use timer0, so timer1 is free.
+ * The trig timer is used by the fasttimer API if enabled.
+ */
+
+ tmr0_ctrl.op = regk_timer_ld;
+ tmr0_ctrl.freq = regk_timer_f100;
+ REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div);
+ REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */
+ tmr0_ctrl.op = regk_timer_run;
+ REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */
+
+ /* enable the timer irq */
+ timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask);
+ timer_intr_mask.tmr0 = 1;
+ REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
+}
+
+void __init
+time_init(void)
+{
+ reg_intr_vect_rw_mask intr_mask;
+
+ /* probe for the RTC and read it if it exists
+ * Before the RTC can be probed the loops_per_usec variable needs
+ * to be initialized to make usleep work. A better value for
+ * loops_per_usec is calculated by the kernel later once the
+ * clock has started.
+ */
+ loops_per_usec = 50;
+
+ if(RTC_INIT() < 0) {
+ /* no RTC, start at 1980 */
+ xtime.tv_sec = 0;
+ xtime.tv_nsec = 0;
+ have_rtc = 0;
+ } else {
+ /* get the current time */
+ have_rtc = 1;
+ update_xtime_from_cmos();
+ }
+
+ /*
+ * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
+ * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
+ */
+ set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
+
+ /* Start CPU local timer */
+ cris_timer_init();
+
+ /* enable the timer irq in global config */
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ intr_mask.timer = 1;
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ /* now actually register the timer irq handler that calls timer_interrupt() */
+
+ setup_irq(TIMER_INTR_VECT, &irq_timer);
+
+ /* enable watchdog if we should use one */
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+ printk("Enabling watchdog...\n");
+ start_watchdog();
+
+ /* If we use the hardware watchdog, we want to trap it as an NMI
+ and dump registers before it resets us. For this to happen, we
+ must set the "m" NMI enable flag (which once set, is unset only
+ when an NMI is taken).
+
+ The same goes for the external NMI, but that doesn't have any
+ driver or infrastructure support yet. */
+ {
+ unsigned long flags;
+ local_save_flags(flags);
+ flags |= (1<<30); /* NMI M flag is at bit 30 */
+ local_irq_restore(flags);
+ }
+#endif
+}
diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
new file mode 100644
index 0000000..6e37870
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+
+#include <asm/arch/hwregs/supp_reg.h>
+
+extern void reset_watchdog(void);
+extern void stop_watchdog(void);
+
+extern int raw_printk(const char *fmt, ...);
+
+void
+show_registers(struct pt_regs *regs)
+{
+ /*
+ * It's possible to use either the USP register or current->thread.usp.
+ * USP might not correspond to the current proccess for all cases this
+ * function is called, and current->thread.usp isn't up to date for the
+ * current proccess. Experience shows that using USP is the way to go.
+ */
+ unsigned long usp;
+ unsigned long d_mmu_cause;
+ unsigned long i_mmu_cause;
+
+ usp = rdusp();
+
+ raw_printk("CPU: %d\n", smp_processor_id());
+
+ raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
+ regs->erp, regs->srp, regs->ccs, usp, regs->mof);
+
+ raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
+
+ raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
+
+ raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
+ regs->r8, regs->r9, regs->r10, regs->r11);
+
+ raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
+ regs->r12, regs->r13, regs->orig_r10, regs->acr);
+
+ raw_printk("sp: %08lx\n", regs);
+
+ SUPP_BANK_SEL(BANK_IM);
+ SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause);
+
+ SUPP_BANK_SEL(BANK_DM);
+ SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause);
+
+ raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause);
+ raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
+
+ raw_printk("Process %s (pid: %d, stackpage: %08lx)\n",
+ current->comm, current->pid, (unsigned long) current);
+
+ /* Show additional info if in kernel-mode. */
+ if (!user_mode(regs)) {
+ int i;
+ unsigned char c;
+
+ show_stack(NULL, (unsigned long *) usp);
+
+ /*
+ * If the previous stack-dump wasn't a kernel one, dump the
+ * kernel stack now.
+ */
+ if (usp != 0)
+ show_stack(NULL, NULL);
+
+ raw_printk("\nCode: ");
+
+ if (regs->erp < PAGE_OFFSET)
+ goto bad_value;
+
+ /*
+ * Quite often the value at regs->erp doesn't point to the
+ * interesting instruction, which often is the previous
+ * instruction. So dump at an offset large enough that the
+ * instruction decoding should be in sync at the interesting
+ * point, but small enough to fit on a row. The regs->erp
+ * location is pointed out in a ksymoops-friendly way by
+ * wrapping the byte for that address in parenthesis.
+ */
+ for (i = -12; i < 12; i++) {
+ if (__get_user(c, &((unsigned char *) regs->erp)[i])) {
+bad_value:
+ raw_printk(" Bad IP value.");
+ break;
+ }
+
+ if (i == 0)
+ raw_printk("(%02x) ", c);
+ else
+ raw_printk("%02x ", c);
+ }
+
+ raw_printk("\n");
+ }
+}
+
+/*
+ * This gets called from entry.S when the watchdog has bitten. Show something
+ * similiar to an Oops dump, and if the kernel if configured to be a nice doggy;
+ * halt instead of reboot.
+ */
+void
+watchdog_bite_hook(struct pt_regs *regs)
+{
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ local_irq_disable();
+ stop_watchdog();
+ show_registers(regs);
+
+ while (1)
+ ; /* Do nothing. */
+#else
+ show_registers(regs);
+#endif
+}
+
+/* This is normally the Oops function. */
+void
+die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+ if (user_mode(regs))
+ return;
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ /*
+ * This printout might take too long and could trigger
+ * the watchdog normally. If NICE_DOGGY is set, simply
+ * stop the watchdog during the printout.
+ */
+ stop_watchdog();
+#endif
+
+ raw_printk("%s: %04lx\n", str, err & 0xffff);
+
+ show_registers(regs);
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ reset_watchdog();
+#endif
+
+ do_exit(SIGSEGV);
+}
+
+void arch_enable_nmi(void)
+{
+ unsigned long flags;
+ local_save_flags(flags);
+ flags |= (1<<30); /* NMI M flag is at bit 30 */
+ local_irq_restore(flags);
+}
diff --git a/arch/cris/arch-v32/kernel/vcs_hook.c b/arch/cris/arch-v32/kernel/vcs_hook.c
new file mode 100644
index 0000000..64d71c5
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/vcs_hook.c
@@ -0,0 +1,96 @@
+// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $
+//
+// Call simulator hook. This is the part running in the
+// simulated program.
+//
+
+#include "vcs_hook.h"
+#include <stdarg.h>
+#include <asm/arch-v32/hwregs/reg_map.h>
+#include <asm/arch-v32/hwregs/intr_vect_defs.h>
+
+#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */
+#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */
+
+#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset]
+#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset]
+#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0)
+#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset]
+
+
+// ------------------------------------------------------------------ hook_call
+int hook_call( unsigned id, unsigned pcnt, ...) {
+ va_list ap;
+ unsigned i;
+ unsigned ret;
+#ifdef USING_SOS
+ PREEMPT_OFF_SAVE();
+#endif
+
+ // pass parameters
+ HOOK_DATA(0) = id;
+
+ /* Have to make hook_print_str a special case since we call with a
+ parameter of byte type. Should perhaps be a separate
+ hook_call. */
+
+ if (id == hook_print_str) {
+ int i;
+ char *str;
+
+ HOOK_DATA(1) = pcnt;
+
+ va_start(ap, pcnt);
+ str = (char*)va_arg(ap,unsigned);
+
+ for (i=0; i!=pcnt; i++) {
+ HOOK_DATA_BYTE(8+i) = str[i];
+ }
+ HOOK_DATA_BYTE(8+i) = 0; /* null byte */
+ }
+ else {
+ va_start(ap, pcnt);
+ for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned);
+ va_end(ap);
+ }
+
+ // read from mem to make sure data has propagated to memory before trigging
+ *((volatile unsigned*) HOOK_MEM_BASE_ADDR);
+
+ // trigger hook
+ HOOK_TRIG(id);
+
+ // wait for call to finish
+ while( VHOOK_DATA(0) > 0 ) {}
+
+ // extract return value
+
+ ret = VHOOK_DATA(1);
+
+#ifdef USING_SOS
+ PREEMPT_RESTORE();
+#endif
+ return ret;
+}
+
+unsigned
+hook_buf(unsigned i)
+{
+ return (HOOK_DATA(i));
+}
+
+void print_str( const char *str ) {
+ int i;
+ for (i=1; str[i]; i++); /* find null at end of string */
+ hook_call(hook_print_str, i, str);
+}
+
+// --------------------------------------------------------------- CPU_KICK_DOG
+void CPU_KICK_DOG(void) {
+ (void) hook_call( hook_kick_dog, 0 );
+}
+
+// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT
+void CPU_WATCHDOG_TIMEOUT( unsigned t ) {
+ (void) hook_call( hook_dog_timeout, 1, t );
+}
diff --git a/arch/cris/arch-v32/kernel/vcs_hook.h b/arch/cris/arch-v32/kernel/vcs_hook.h
new file mode 100644
index 0000000..7d73709
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/vcs_hook.h
@@ -0,0 +1,42 @@
+// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $
+//
+// Call simulator hook functions
+
+#ifndef HOOK_H
+#define HOOK_H
+
+int hook_call( unsigned id, unsigned pcnt, ...);
+
+enum hook_ids {
+ hook_debug_on = 1,
+ hook_debug_off,
+ hook_stop_sim_ok,
+ hook_stop_sim_fail,
+ hook_alloc_shared,
+ hook_ptr_shared,
+ hook_free_shared,
+ hook_file2shared,
+ hook_cmp_shared,
+ hook_print_params,
+ hook_sim_time,
+ hook_stop_sim,
+ hook_kick_dog,
+ hook_dog_timeout,
+ hook_rand,
+ hook_srand,
+ hook_rand_range,
+ hook_print_str,
+ hook_print_hex,
+ hook_cmp_offset_shared,
+ hook_fill_random_shared,
+ hook_alloc_random_data,
+ hook_calloc_random_data,
+ hook_print_int,
+ hook_print_uint,
+ hook_fputc,
+ hook_init_fd,
+ hook_sbrk
+
+};
+
+#endif
