[SPARC64]: Elminate all usage of hard-coded trap globals.
UltraSPARC has special sets of global registers which are switched to
for certain trap types. There is one set for MMU related traps, one
set of Interrupt Vector processing, and another set (called the
Alternate globals) for all other trap types.
For what seems like forever we've hard coded the values in some of
these trap registers. Some examples include:
1) Interrupt Vector global %g6 holds current processors interrupt
work struct where received interrupts are managed for IRQ handler
dispatch.
2) MMU global %g7 holds the base of the page tables of the currently
active address space.
3) Alternate global %g6 held the current_thread_info() value.
Such hardcoding has resulted in some serious issues in many areas.
There are some code sequences where having another register available
would help clean up the implementation. Taking traps such as
cross-calls from the OBP firmware requires some trick code sequences
wherein we have to save away and restore all of the special sets of
global registers when we enter/exit OBP.
We were also using the IMMU TSB register on SMP to hold the per-cpu
area base address, which doesn't work any longer now that we actually
use the TSB facility of the cpu.
The implementation is pretty straight forward. One tricky bit is
getting the current processor ID as that is different on different cpu
variants. We use a stub with a fancy calling convention which we
patch at boot time. The calling convention is that the stub is
branched to and the (PC - 4) to return to is in register %g1. The cpu
number is left in %g6. This stub can be invoked by using the
__GET_CPUID macro.
We use an array of per-cpu trap state to store the current thread and
physical address of the current address space's page tables. The
TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this
table, it uses __GET_CPUID and also clobbers %g1.
TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load
the current processor's IRQ software state into %g6. It also uses
__GET_CPUID and clobbers %g1.
Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the
current address space's page tables into %g7, it clobbers %g1 and uses
__GET_CPUID.
Many refinements are possible, as well as some tuning, with this stuff
in place.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index d2d3369..8c24585 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -38,6 +38,7 @@
#include <asm/timer.h>
#include <asm/starfire.h>
#include <asm/tlb.h>
+#include <asm/sections.h>
extern void calibrate_delay(void);
@@ -87,10 +88,6 @@
cpu_data(id).clock_tick = prom_getintdefault(cpu_node,
"clock-frequency", 0);
- cpu_data(id).pgcache_size = 0;
- cpu_data(id).pte_cache[0] = NULL;
- cpu_data(id).pte_cache[1] = NULL;
- cpu_data(id).pgd_cache = NULL;
cpu_data(id).idle_volume = 1;
cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size",
@@ -121,26 +118,15 @@
extern void inherit_locked_prom_mappings(int save_p);
-static inline void cpu_setup_percpu_base(unsigned long cpu_id)
-{
-#error IMMU TSB usage must be fixed
- __asm__ __volatile__("mov %0, %%g5\n\t"
- "stxa %0, [%1] %2\n\t"
- "membar #Sync"
- : /* no outputs */
- : "r" (__per_cpu_offset(cpu_id)),
- "r" (TSB_REG), "i" (ASI_IMMU));
-}
-
void __init smp_callin(void)
{
int cpuid = hard_smp_processor_id();
inherit_locked_prom_mappings(0);
- __flush_tlb_all();
+ __local_per_cpu_offset = __per_cpu_offset(cpuid);
- cpu_setup_percpu_base(cpuid);
+ __flush_tlb_all();
smp_setup_percpu_timer();
@@ -1107,12 +1093,15 @@
void __devinit smp_prepare_boot_cpu(void)
{
- if (hard_smp_processor_id() >= NR_CPUS) {
+ int cpu = hard_smp_processor_id();
+
+ if (cpu >= NR_CPUS) {
prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
prom_halt();
}
- current_thread_info()->cpu = hard_smp_processor_id();
+ current_thread_info()->cpu = cpu;
+ __local_per_cpu_offset = __per_cpu_offset(cpu);
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), phys_cpu_present_map);
@@ -1173,12 +1162,9 @@
{
unsigned long goal, size, i;
char *ptr;
- /* Created by linker magic */
- extern char __per_cpu_start[], __per_cpu_end[];
/* Copy section for each CPU (we discard the original) */
- goal = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
-
+ goal = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
#ifdef CONFIG_MODULES
if (goal < PERCPU_ENOUGH_ROOM)
goal = PERCPU_ENOUGH_ROOM;
@@ -1187,31 +1173,10 @@
for (size = 1UL; size < goal; size <<= 1UL)
__per_cpu_shift++;
- /* Make sure the resulting __per_cpu_base value
- * will fit in the 43-bit sign extended IMMU
- * TSB register.
- */
- ptr = __alloc_bootmem(size * NR_CPUS, PAGE_SIZE,
- (unsigned long) __per_cpu_start);
+ ptr = alloc_bootmem(size * NR_CPUS);
__per_cpu_base = ptr - __per_cpu_start;
- if ((__per_cpu_shift < PAGE_SHIFT) ||
- (__per_cpu_base & ~PAGE_MASK) ||
- (__per_cpu_base != (((long) __per_cpu_base << 20) >> 20))) {
- prom_printf("PER_CPU: Invalid layout, "
- "ptr[%p] shift[%lx] base[%lx]\n",
- ptr, __per_cpu_shift, __per_cpu_base);
- prom_halt();
- }
-
for (i = 0; i < NR_CPUS; i++, ptr += size)
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-
- /* Finally, load in the boot cpu's base value.
- * We abuse the IMMU TSB register for trap handler
- * entry and exit loading of %g5. That is why it
- * has to be page aligned.
- */
- cpu_setup_percpu_base(hard_smp_processor_id());
}