Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A first set of bug fixes that didn't make it for the merge window, and
two Kconfig cleanups that still make sense at this point.
Unfortunately, one of the two cleanups caused an unintended change in
the original version, so we had to revert one part of it and do some
more testing to ensure the rest is really fine. There was also a
last-minute rebase of the patches to remove another bad commit"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: use menuconfig for sub-arch menus
ARM: multi_v7_defconfig: re-enable SDHCI drivers
ARM: EXYNOS: Fix compilation warning
ARM: exynos: move sysram info to exynos.c
ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board
ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board
ARM: exynos: cleanup kconfig option display
misc: vexpress: fix error handling vexpress_syscfg_regmap_init()
ARM: Remove ARCH_HAS_CPUFREQ config option
ARM: integrator: fix section mismatch problem
ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
ARM: samsung: make SAMSUNG_DMADEV optional
remoteproc: da8xx: don't select CMA on no-MMU
bus/arm-cci: add dependency on OF && CPU_V7
ARM: keystone requires ARM_PATCH_PHYS_VIRT
ARM: omap2: fix am43xx dependency on l2x0 cache
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 87b63fd..245058b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -175,13 +175,6 @@
config ARCH_HAS_ILOG2_U64
bool
-config ARCH_HAS_CPUFREQ
- bool
- help
- Internal node to signify that the ARCH has CPUFREQ support
- and that the relevant menu configurations are displayed for
- it.
-
config ARCH_HAS_BANDGAP
bool
@@ -318,7 +311,6 @@
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
- select ARCH_HAS_CPUFREQ
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
@@ -538,7 +530,6 @@
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
@@ -637,7 +628,6 @@
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
- select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
@@ -707,7 +697,6 @@
config ARCH_SA1100
bool "SA1100-based"
- select ARCH_HAS_CPUFREQ
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
@@ -725,7 +714,6 @@
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ATAGS
select CLKDEV_LOOKUP
@@ -746,7 +734,6 @@
config ARCH_S3C64XX
bool "Samsung S3C64XX"
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
@@ -809,7 +796,6 @@
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select ATAGS
@@ -845,7 +831,6 @@
config ARCH_OMAP1
bool "TI OMAP1"
depends on MMU
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
@@ -1009,8 +994,6 @@
source "arch/arm/mach-sa1100/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
-
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-spear/Kconfig"
@@ -1028,6 +1011,7 @@
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
@@ -2109,9 +2093,7 @@
menu "CPU Power Management"
-if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
-endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 772fec2..1e2919d 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -91,6 +91,8 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index ff9637d..5bae473 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -98,6 +98,8 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e5c6a04..4e5a59e 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -25,7 +25,7 @@
memory {
device_type = "memory";
- reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
};
soc {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e2d6204..17d9462 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -300,6 +300,7 @@
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 59066cf..536a137 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -32,6 +32,7 @@
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
+CONFIG_CACHE_L2X0=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_SMP=y
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 9bc6db1..41c8391 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,10 +1,9 @@
-config ARCH_BCM
+menuconfig ARCH_BCM
bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
help
This enables support for Broadcom ARM based SoC chips
-menu "Broadcom SoC Selection"
- depends on ARCH_BCM
+if ARCH_BCM
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
@@ -88,4 +87,4 @@
different SoC or with the older BCM47XX and BCM53XX based
network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-endmenu
+endif
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 101e0f3..2631cfc 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_BERLIN
+menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
@@ -9,8 +9,6 @@
if ARCH_BERLIN
-menu "Marvell Berlin SoC variants"
-
config MACH_BERLIN_BG2
bool "Marvell Armada 1500 (BG2)"
select CACHE_L2X0
@@ -30,6 +28,4 @@
select HAVE_ARM_TWD if SMP
select PINCTRL_BERLIN_BG2Q
-endmenu
-
endif
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 66838f4..3c22a19 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,12 +1,11 @@
-config ARCH_CNS3XXX
+menuconfig ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select PCI_DOMAINS if PCI
help
Support for Cavium Networks CNS3XXX platform.
-menu "CNS3XXX platform type"
- depends on ARCH_CNS3XXX
+if ARCH_CNS3XXX
config MACH_CNS3420VB
bool "Support for CNS3420 Validation Board"
@@ -17,4 +16,4 @@
This is a platform with an on-board ARM11 MPCore and has support
for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-endmenu
+endif
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index db18ef8..584e8d4 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -39,7 +39,6 @@
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
select ARCH_DAVINCI_DA8XX
- select ARCH_HAS_CPUFREQ
select CP_INTC
config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index d58995c9..8f9b66c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,10 +7,9 @@
# Configuration options for the EXYNOS4
-config ARCH_EXYNOS
+menuconfig ARCH_EXYNOS
bool "Samsung EXYNOS" if ARCH_MULTI_V7
select ARCH_HAS_BANDGAP
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
@@ -30,8 +29,6 @@
if ARCH_EXYNOS
-menu "SAMSUNG EXYNOS SoCs Support"
-
config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3"
select ARM_CPU_SUSPEND if PM
@@ -118,8 +115,6 @@
default y
depends on SOC_EXYNOS5420
-endmenu
-
config EXYNOS5420_MCPM
bool "Exynos5420 Multi-Cluster PM support"
depends on MCPM && SOC_EXYNOS5420
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 16617bd..1ee9176 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -118,6 +118,7 @@
extern void __iomem *sysram_base_addr;
void exynos_init_io(void);
void exynos_restart(enum reboot_mode mode, const char *cmd);
+void exynos_sysram_init(void);
void exynos_cpuidle_init(void);
void exynos_cpufreq_init(void);
void exynos_init_late(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 90aab4d..f38cf7c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -184,6 +184,28 @@
platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
}
+void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+void __init exynos_sysram_init(void)
+{
+ struct device_node *node;
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_base_addr = of_iomap(node, 0);
+ break;
+ }
+
+ for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+ if (!of_device_is_available(node))
+ continue;
+ sysram_ns_base_addr = of_iomap(node, 0);
+ break;
+ }
+}
+
void __init exynos_init_late(void)
{
if (of_machine_is_compatible("samsung,exynos5440"))
@@ -198,7 +220,7 @@
int depth, void *data)
{
struct map_desc iodesc;
- __be32 *reg;
+ const __be32 *reg;
int len;
if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
@@ -271,6 +293,13 @@
}
}
+ /*
+ * This is called from smp_prepare_cpus if we've built for SMP, but
+ * we still need to set it up for PM and firmware ops if not.
+ */
+ if (!IS_ENABLED(SMP))
+ exynos_sysram_init();
+
exynos_cpuidle_init();
exynos_cpufreq_init();
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index ec02422..1c8d31e 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,28 +32,6 @@
extern void exynos4_secondary_startup(void);
-void __iomem *sysram_base_addr;
-void __iomem *sysram_ns_base_addr;
-
-static void __init exynos_smp_prepare_sysram(void)
-{
- struct device_node *node;
-
- for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
- if (!of_device_is_available(node))
- continue;
- sysram_base_addr = of_iomap(node, 0);
- break;
- }
-
- for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
- if (!of_device_is_available(node))
- continue;
- sysram_ns_base_addr = of_iomap(node, 0);
- break;
- }
-}
-
static inline void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
@@ -234,11 +212,11 @@
{
int i;
+ exynos_sysram_init();
+
if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
- exynos_smp_prepare_sysram();
-
/*
* Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 830b76e..a5960e2 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,7 +1,6 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d42eab..28fa2fa 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,5 @@
-config ARCH_MXC
+menuconfig ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
@@ -13,8 +12,7 @@
help
Support for Freescale MXC/iMX-based family of processors
-menu "Freescale i.MX support"
- depends on ARCH_MXC
+if ARCH_MXC
config MXC_TZIC
bool
@@ -99,7 +97,6 @@
config SOC_IMX27
bool
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
@@ -124,7 +121,6 @@
config SOC_IMX5
bool
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select MXC_TZIC
@@ -786,4 +782,4 @@
source "arch/arm/mach-imx/devices/Kconfig"
-endmenu
+endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index ba43321..64f8e25 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -28,7 +28,7 @@
bool
config INTEGRATOR_IMPD1
- tristate "Include support for Integrator/IM-PD1"
+ bool "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0e870ea..3ce8807 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -308,7 +308,12 @@
*/
#define IMPD1_VALID_IRQS 0x00000bffU
-static int __init impd1_probe(struct lm_device *dev)
+/*
+ * As this module is bool, it is OK to have this as __init_refok() - no
+ * probe calls will be done after the initial system bootup, as devices
+ * are discovered as part of the machine startup.
+ */
+static int __init_refok impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
int irq_base;
@@ -397,6 +402,11 @@
static struct lm_driver impd1_driver = {
.drv = {
.name = "impd1",
+ /*
+ * As we're dropping the probe() function, suppress driver
+ * binding from sysfs.
+ */
+ .suppress_bind_attrs = true,
},
.probe = impd1_probe,
.remove = impd1_remove,
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index f50bc93..98a156a 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,6 +1,7 @@
config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7
+ depends on ARM_PATCH_PHYS_VIRT
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select CLKSRC_MMIO
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 82a4ba8..f49328c 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MOXART
+menuconfig ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 6090b9e..4a7c250 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MVEBU
+menuconfig ARCH_MVEBU
bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
@@ -13,8 +13,6 @@
if ARCH_MVEBU
-menu "Marvell EBU SoC variants"
-
config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
@@ -84,7 +82,6 @@
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select KIRKWOOD_CLK
@@ -97,6 +94,4 @@
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-endmenu
-
endif
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 486d301..3c61096 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_NOMADIK
+menuconfig ARCH_NOMADIK
bool "ST-Ericsson Nomadik"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
@@ -15,7 +15,6 @@
Support for the Nomadik platform by ST-Ericsson
if ARCH_NOMADIK
-menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
@@ -24,7 +23,6 @@
select I2C_ALGOBIT
select I2C_NOMADIK
-endmenu
endif
config NOMADIK_8815
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0ba4826..0625053 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,3 +1,6 @@
+menu "TI OMAP/AM/DM/DRA Family"
+ depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
+
config ARCH_OMAP
bool
@@ -28,7 +31,6 @@
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
select ARM_GIC
- select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
@@ -80,7 +82,6 @@
config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
@@ -343,3 +344,5 @@
endmenu
endif
+
+endmenu
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index ff02973..a373d50 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -91,7 +91,14 @@
extern void omap3_secure_sync32k_timer_init(void);
extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);
+#ifdef CONFIG_CACHE_L2X0
int omap_l2_cache_init(void);
+#else
+static inline int omap_l2_cache_init(void)
+{
+ return 0;
+}
+#endif
extern void omap5_realtime_timer_init(void);
void omap2420_init_early(void);
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index e4e505f..042f693 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_SIRF
+menuconfig ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
@@ -11,7 +11,7 @@
if ARCH_SIRF
-menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
+comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
@@ -37,8 +37,6 @@
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
-endmenu
-
config SIRF_IRQ
bool
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fd2b99d..ee5697b 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_QCOM
+menuconfig ARCH_QCOM
bool "Qualcomm Support" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
@@ -11,8 +11,6 @@
if ARCH_QCOM
-menu "Qualcomm SoC Selection"
-
config ARCH_MSM8X60
bool "Enable support for MSM8X60"
select CLKSRC_QCOM
@@ -25,8 +23,6 @@
bool "Enable support for MSM8974"
select HAVE_ARM_ARCH_TIMER
-endmenu
-
config QCOM_SCM
bool
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 04284de..ad5316a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -117,7 +117,7 @@
Compile in platform device definition for Samsung TouchScreen.
config S3C24XX_DMA
- bool "S3C2410 DMA support"
+ bool "S3C2410 DMA support (deprecated)"
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 3136d86..26ca242 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -18,9 +18,9 @@
Enable S3C6410 CPU support
config S3C64XX_PL080
- bool "S3C64XX DMA using generic PL08x driver"
+ def_bool DMADEVICES
+ select ARM_AMBA
select AMBA_PL08X
- select SAMSUNG_DMADEV
config S3C64XX_SETUP_SDHCI
bool
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index bb2111b..26003e2 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,16 +9,18 @@
config CPU_S5P6440
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6450 CPU support
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 15170be..c5e3a96 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -9,8 +9,9 @@
config CPU_S5PC100
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_EXT_INT
- select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 8c3abe5..f60f286 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,10 +11,11 @@
config CPU_S5PV210
bool
+ select ARM_AMBA
+ select PL330_DMA if DMADEVICES
select S5P_EXT_INT
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
help
Enable S5PV210 CPU support
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index dbd954e..7980730 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,7 +1,7 @@
config ARCH_SHMOBILE
bool
-config ARCH_SHMOBILE_MULTI
+menuconfig ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
@@ -15,7 +15,7 @@
if ARCH_SHMOBILE_MULTI
-comment "Renesas ARM SoCs System Type"
+#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
@@ -85,7 +85,6 @@
select CPU_V7
select SH_CLK_CPG
select RENESAS_IRQC
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@@ -264,7 +263,6 @@
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 0786249..90df202 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -14,7 +14,6 @@
config ARCH_SPEAR13XX
bool "ST SPEAr13xx"
depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
- select ARCH_HAS_CPUFREQ
select ARM_GIC
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index abf9ee9..7e33e9d 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,5 +1,5 @@
menuconfig ARCH_STI
- bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
+ bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
select ARM_GIC
select ARM_GLOBAL_TIMER
select PINCTRL
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index e16999e..0953996 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,6 +1,5 @@
-config ARCH_TEGRA
+menuconfig ARCH_TEGRA
bool "NVIDIA Tegra" if ARCH_MULTI_V7
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC
@@ -16,8 +15,7 @@
help
This enables support for NVIDIA Tegra based systems.
-menu "NVIDIA Tegra options"
- depends on ARCH_TEGRA
+if ARCH_TEGRA
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
@@ -69,4 +67,4 @@
which controls AHB bus master arbitration and some
performance parameters(priority, prefech size).
-endmenu
+endif
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index e3a96d7..bc51a71 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_U300
+menuconfig ARCH_U300
bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
depends on MMU
select ARCH_REQUIRE_GPIOLIB
@@ -16,8 +16,6 @@
if ARCH_U300
-menu "ST-Ericsson AB U300/U335 Platform"
-
config MACH_U300
depends on ARCH_U300
bool "U300"
@@ -43,6 +41,4 @@
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-endmenu
-
endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b41a42d..5be7c45 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,9 +1,8 @@
-config ARCH_U8500
+menuconfig ARCH_U8500
bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
depends on MMU
select AB8500_CORE
select ABX500_CORE
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_754322
@@ -34,8 +33,6 @@
select REGULATOR
select REGULATOR_DB8500_PRCMU
-menu "Ux500 target platform (boards)"
-
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
select I2C
@@ -68,8 +65,6 @@
a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500.
-endmenu
-
config UX500_DEBUG_UART
int "Ux500 UART to use for low-level debug"
default 2
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 90249cf..99c1f15 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_VEXPRESS
+menuconfig ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_BIG_ENDIAN
@@ -37,8 +37,7 @@
platforms. The traditional (ATAGs) boot method is not usable on
these boards with this option.
-menu "Versatile Express platform type"
- depends on ARCH_VEXPRESS
+if ARCH_VEXPRESS
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
bool "Enable A5 and A9 only errata work-arounds"
@@ -65,7 +64,6 @@
config ARCH_VEXPRESS_SPC
bool "Versatile Express Serial Power Controller (SPC)"
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select PM_OPP
help
@@ -83,4 +81,4 @@
Support for CPU and cluster power management on Versatile Express
with a TC2 (A15x2 A7x3) big.LITTLE core tile.
-endmenu
+endif
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 08f56a4..aaaa24f 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -1,6 +1,5 @@
config ARCH_VT8500
bool
- select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select VT8500_TIMER
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 573e0db..0c164f8 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,6 +1,5 @@
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 243dfcb..301b892 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -35,27 +35,15 @@
Base platform power management code for samsung code
if PLAT_SAMSUNG
+menu "Samsung Common options"
# boot configurations
comment "Boot options"
-config S3C_BOOT_ERROR_RESET
- bool "S3C Reboot on decompression error"
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
- bool "Force UART FIFO on during boot process"
- default y
- help
- Say Y here to force the UART FIFOs on during the kernel
- uncompressor
-
-
config S3C_LOWLEVEL_UART_PORT
int "S3C UART to use for low-level messages"
+ depends on ARCH_S3C64XX
default 0
help
Choice of which UART port to use for the low-level messages,
@@ -407,17 +395,16 @@
Include legacy GPIO power management code for platforms not using
pinctrl-samsung driver.
-endif
-
config SAMSUNG_DMADEV
- bool
- select ARM_AMBA
+ bool "Use legacy Samsung DMA abstraction"
+ depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX
select DMADEVICES
- select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
- CPU_S5P6450 || CPU_S5P6440)
+ default y
help
Use DMA device engine for PL330 DMAC.
+endif
+
config S5P_DEV_MFC
bool
help
@@ -503,4 +490,5 @@
default "2" if DEBUG_S3C_UART2
default "3" if DEBUG_S3C_UART3
+endmenu
endif
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index a118ec1..1f37d98 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -45,7 +45,7 @@
config ARM_CCI
bool "ARM CCI driver support"
- depends on ARM
+ depends on ARM && OF && CPU_V7
help
Driver supporting the CCI cache coherent interconnect for ARM
platforms.
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
index 73068e5..3250fc1 100644
--- a/drivers/misc/vexpress-syscfg.c
+++ b/drivers/misc/vexpress-syscfg.c
@@ -199,7 +199,7 @@
func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
GFP_KERNEL);
if (!func)
- return NULL;
+ return ERR_PTR(-ENOMEM);
func->syscfg = syscfg;
func->num_templates = num;
@@ -231,10 +231,14 @@
func->regmap = regmap_init(dev, NULL, func,
&vexpress_syscfg_regmap_config);
- if (IS_ERR(func->regmap))
+ if (IS_ERR(func->regmap)) {
+ void *err = func->regmap;
+
kfree(func);
- else
- list_add(&func->list, &syscfg->funcs);
+ return err;
+ }
+
+ list_add(&func->list, &syscfg->funcs);
return func->regmap;
}
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index ce1743d..5e343ba 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -44,7 +44,7 @@
config DA8XX_REMOTEPROC
tristate "DA8xx/OMAP-L13x remoteproc support"
depends on ARCH_DAVINCI_DA8XX
- select CMA
+ select CMA if MMU
select REMOTEPROC
select RPMSG
help
