rtc-pcf8563: remove client validation
Validating clients with black magic register checks doesn't make much
sense for new-style i2c driver and has been known to fail on valid NXP
pcf8563 chips. This patch removes the client validation code.
Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index 748a502..a829f20 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -179,58 +179,6 @@
unsigned char max;
};
-static int pcf8563_validate_client(struct i2c_client *client)
-{
- int i;
-
- static const struct pcf8563_limit pattern[] = {
- /* register, mask, min, max */
- { PCF8563_REG_SC, 0x7F, 0, 59 },
- { PCF8563_REG_MN, 0x7F, 0, 59 },
- { PCF8563_REG_HR, 0x3F, 0, 23 },
- { PCF8563_REG_DM, 0x3F, 0, 31 },
- { PCF8563_REG_MO, 0x1F, 0, 12 },
- };
-
- /* check limits (only registers with bcd values) */
- for (i = 0; i < ARRAY_SIZE(pattern); i++) {
- int xfer;
- unsigned char value;
- unsigned char buf = pattern[i].reg;
-
- struct i2c_msg msgs[] = {
- { client->addr, 0, 1, &buf },
- { client->addr, I2C_M_RD, 1, &buf },
- };
-
- xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-
- if (xfer != ARRAY_SIZE(msgs)) {
- dev_err(&client->dev,
- "%s: could not read register 0x%02X\n",
- __func__, pattern[i].reg);
-
- return -EIO;
- }
-
- value = BCD2BIN(buf & pattern[i].mask);
-
- if (value > pattern[i].max ||
- value < pattern[i].min) {
- dev_dbg(&client->dev,
- "%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, "
- "max=%d, value=%d, raw=0x%02X\n",
- __func__, i, pattern[i].reg, pattern[i].mask,
- pattern[i].min, pattern[i].max,
- value, buf);
-
- return -ENODEV;
- }
- }
-
- return 0;
-}
-
static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
return pcf8563_get_datetime(to_i2c_client(dev), tm);
@@ -262,12 +210,6 @@
if (!pcf8563)
return -ENOMEM;
- /* Verify the chip is really an PCF8563 */
- if (pcf8563_validate_client(client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
-
dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
pcf8563->rtc = rtc_device_register(pcf8563_driver.driver.name,
