libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 8257af8..420c343 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -131,7 +131,6 @@
.data_xfer = ixp4xx_mmio_data_xfer,
.cable_detect = ata_cable_40wire,
- .irq_handler = ata_interrupt,
.irq_clear = ixp4xx_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -174,12 +173,12 @@
static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
{
- int ret;
unsigned int irq;
struct resource *cs0, *cs1;
- struct ata_probe_ent ae;
-
+ struct ata_host *host;
+ struct ata_port *ap;
struct ixp4xx_pata_data *data = pdev->dev.platform_data;
+ int rc;
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -187,6 +186,12 @@
if (!cs0 || !cs1)
return -EINVAL;
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
@@ -200,32 +205,22 @@
*data->cs0_cfg = data->cs0_bits;
*data->cs1_cfg = data->cs1_bits;
- memset(&ae, 0, sizeof(struct ata_probe_ent));
- INIT_LIST_HEAD(&ae.node);
+ ap = host->ports[0];
- ae.dev = &pdev->dev;
- ae.port_ops = &ixp4xx_port_ops;
- ae.sht = &ixp4xx_sht;
- ae.n_ports = 1;
- ae.pio_mask = 0x1f; /* PIO4 */
- ae.irq = irq;
- ae.irq_flags = 0;
- ae.port_flags = ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
- | ATA_FLAG_NO_ATAPI | ATA_FLAG_SRST;
+ ap->ops = &ixp4xx_port_ops;
+ ap->pio_mask = 0x1f; /* PIO4 */
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
/* run in polling mode if no irq has been assigned */
if (!irq)
- ae.port_flags |= ATA_FLAG_PIO_POLLING;
+ ap->flags |= ATA_FLAG_PIO_POLLING;
- ixp4xx_setup_port(&ae.port[0], data);
+ ixp4xx_setup_port(&ap->ioaddr, data);
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
- ret = ata_device_add(&ae);
- if (ret == 0)
- return -ENODEV;
-
- return 0;
+ /* activate host */
+ return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
}
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
