arch/x86/kernel/cpu/mcheck/therm_throt.c - arm/linux-arm64-legacy - Git at Google

 /*
  * Thermal throttle event support code (such as syslog messaging and rate
  * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
  *
  * This allows consistent reporting of CPU thermal throttle events.
  *
  * Maintains a counter in /sys that keeps track of the number of thermal
  * events, such that the user knows how bad the thermal problem might be
  * (since the logging to syslog and mcelog is rate limited).
  *
  * Author: Dmitriy Zavin (dmitriyz@google.com)
  *
  * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
  *          Inspired by Ross Biro's and Al Borchers' counter code.
  */
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/percpu.h>
 #include <linux/export.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/cpu.h>

 #include <asm/processor.h>
 #include <asm/apic.h>
 #include <asm/idle.h>
 #include <asm/mce.h>
 #include <asm/msr.h>

 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)

 #define THERMAL_THROTTLING_EVENT	0
 #define POWER_LIMIT_EVENT		1

 /*
  * Current thermal event state:
  */
 struct _thermal_state {
 	bool			new_event;
 	int			event;
 	u64			next_check;
 	unsigned long		count;
 	unsigned long		last_count;
 };

 struct thermal_state {
 	struct _thermal_state core_throttle;
 	struct _thermal_state core_power_limit;
 	struct _thermal_state package_throttle;
 	struct _thermal_state package_power_limit;
 	struct _thermal_state core_thresh0;
 	struct _thermal_state core_thresh1;
 };

 /* Callback to handle core threshold interrupts */
 int (*platform_thermal_notify)(__u64 msr_val);
 EXPORT_SYMBOL(platform_thermal_notify);

 static DEFINE_PER_CPU(struct thermal_state, thermal_state);

 static atomic_t therm_throt_en	= ATOMIC_INIT(0);

 static u32 lvtthmr_init __read_mostly;

 #ifdef CONFIG_SYSFS
 #define define_therm_throt_device_one_ro(_name)				\
 	static DEVICE_ATTR(_name, 0444,					\
 			   therm_throt_device_show_##_name,		\
 				   NULL)				\

 #define define_therm_throt_device_show_func(event, name)		\
 									\
 static ssize_t therm_throt_device_show_##event##_##name(		\
 			struct device *dev,				\
 			struct device_attribute *attr,			\
 			char *buf)					\
 {									\
 	unsigned int cpu = dev->id;					\
 	ssize_t ret;							\
 									\
 	preempt_disable();	/* CPU hotplug */			\
 	if (cpu_online(cpu)) {						\
 		ret = sprintf(buf, "%lu\n",				\
 			      per_cpu(thermal_state, cpu).event.name);	\
 	} else								\
 		ret = 0;						\
 	preempt_enable();						\
 									\
 	return ret;							\
 }

 define_therm_throt_device_show_func(core_throttle, count);
 define_therm_throt_device_one_ro(core_throttle_count);

 define_therm_throt_device_show_func(core_power_limit, count);
 define_therm_throt_device_one_ro(core_power_limit_count);

 define_therm_throt_device_show_func(package_throttle, count);
 define_therm_throt_device_one_ro(package_throttle_count);

 define_therm_throt_device_show_func(package_power_limit, count);
 define_therm_throt_device_one_ro(package_power_limit_count);

 static struct attribute *thermal_throttle_attrs[] = {
 	&dev_attr_core_throttle_count.attr,
 	NULL
 };

 static struct attribute_group thermal_attr_group = {
 	.attrs	= thermal_throttle_attrs,
 	.name	= "thermal_throttle"
 };
 #endif /* CONFIG_SYSFS */

 #define CORE_LEVEL	0
 #define PACKAGE_LEVEL	1

 /***
  * therm_throt_process - Process thermal throttling event from interrupt
  * @curr: Whether the condition is current or not (boolean), since the
  *        thermal interrupt normally gets called both when the thermal
  *        event begins and once the event has ended.
  *
  * This function is called by the thermal interrupt after the
  * IRQ has been acknowledged.
  *
  * It will take care of rate limiting and printing messages to the syslog.
  *
  * Returns: 0 : Event should NOT be further logged, i.e. still in
  *              "timeout" from previous log message.
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
 static int therm_throt_process(bool new_event, int event, int level)
 {
 	struct _thermal_state *state;
 	unsigned int this_cpu = smp_processor_id();
 	bool old_event;
 	u64 now;
 	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);

 	now = get_jiffies_64();
 	if (level == CORE_LEVEL) {
 		if (event == THERMAL_THROTTLING_EVENT)
 			state = &pstate->core_throttle;
 		else if (event == POWER_LIMIT_EVENT)
 			state = &pstate->core_power_limit;
 		else
 			 return 0;
 	} else if (level == PACKAGE_LEVEL) {
 		if (event == THERMAL_THROTTLING_EVENT)
 			state = &pstate->package_throttle;
 		else if (event == POWER_LIMIT_EVENT)
 			state = &pstate->package_power_limit;
 		else
 			return 0;
 	} else
 		return 0;

 	old_event = state->new_event;
 	state->new_event = new_event;

 	if (new_event)
 		state->count++;

 	if (time_before64(now, state->next_check) &&
 			state->count != state->last_count)
 		return 0;

 	state->next_check = now + CHECK_INTERVAL;
 	state->last_count = state->count;

 	/* if we just entered the thermal event */
 	if (new_event) {
 		if (event == THERMAL_THROTTLING_EVENT)
 			printk(KERN_CRIT "CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package",
 				state->count);
 		else
 			printk(KERN_CRIT "CPU%d: %s power limit notification (total events = %lu)\n",
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package",
 				state->count);
 		return 1;
 	}
 	if (old_event) {
 		if (event == THERMAL_THROTTLING_EVENT)
 			printk(KERN_INFO "CPU%d: %s temperature/speed normal\n",
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package");
 		else
 			printk(KERN_INFO "CPU%d: %s power limit normal\n",
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package");
 		return 1;
 	}

 	return 0;
 }

 static int thresh_event_valid(int event)
 {
 	struct _thermal_state *state;
 	unsigned int this_cpu = smp_processor_id();
 	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
 	u64 now = get_jiffies_64();

 	state = (event == 0) ? &pstate->core_thresh0 : &pstate->core_thresh1;

 	if (time_before64(now, state->next_check))
 		return 0;

 	state->next_check = now + CHECK_INTERVAL;
 	return 1;
 }

 #ifdef CONFIG_SYSFS
 /* Add/Remove thermal_throttle interface for CPU device: */
 static __cpuinit int thermal_throttle_add_dev(struct device *dev,
 				unsigned int cpu)
 {
 	int err;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);

 	err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
 	if (err)
 		return err;

 	if (cpu_has(c, X86_FEATURE_PLN))
 		err = sysfs_add_file_to_group(&dev->kobj,
 					      &dev_attr_core_power_limit_count.attr,
 					      thermal_attr_group.name);
 	if (cpu_has(c, X86_FEATURE_PTS)) {
 		err = sysfs_add_file_to_group(&dev->kobj,
 					      &dev_attr_package_throttle_count.attr,
 					      thermal_attr_group.name);
 		if (cpu_has(c, X86_FEATURE_PLN))
 			err = sysfs_add_file_to_group(&dev->kobj,
 					&dev_attr_package_power_limit_count.attr,
 					thermal_attr_group.name);
 	}

 	return err;
 }

 static __cpuinit void thermal_throttle_remove_dev(struct device *dev)
 {
 	sysfs_remove_group(&dev->kobj, &thermal_attr_group);
 }

 /* Mutex protecting device creation against CPU hotplug: */
 static DEFINE_MUTEX(therm_cpu_lock);

 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
 static __cpuinit int
 thermal_throttle_cpu_callback(struct notifier_block *nfb,
 			      unsigned long action,
 			      void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
 	struct device *dev;
 	int err = 0;

 	dev = get_cpu_device(cpu);

 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
 		mutex_lock(&therm_cpu_lock);
 		err = thermal_throttle_add_dev(dev, cpu);
 		mutex_unlock(&therm_cpu_lock);
 		WARN_ON(err);
 		break;
 	case CPU_UP_CANCELED:
 	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		mutex_lock(&therm_cpu_lock);
 		thermal_throttle_remove_dev(dev);
 		mutex_unlock(&therm_cpu_lock);
 		break;
 	}
 	return notifier_from_errno(err);
 }

 static struct notifier_block thermal_throttle_cpu_notifier __cpuinitdata =
 {
 	.notifier_call = thermal_throttle_cpu_callback,
 };

 static __init int thermal_throttle_init_device(void)
 {
 	unsigned int cpu = 0;
 	int err;

 	if (!atomic_read(&therm_throt_en))
 		return 0;

 	register_hotcpu_notifier(&thermal_throttle_cpu_notifier);

 #ifdef CONFIG_HOTPLUG_CPU
 	mutex_lock(&therm_cpu_lock);
 #endif
 	/* connect live CPUs to sysfs */
 	for_each_online_cpu(cpu) {
 		err = thermal_throttle_add_dev(get_cpu_device(cpu), cpu);
 		WARN_ON(err);
 	}
 #ifdef CONFIG_HOTPLUG_CPU
 	mutex_unlock(&therm_cpu_lock);
 #endif

 	return 0;
 }
 device_initcall(thermal_throttle_init_device);

 #endif /* CONFIG_SYSFS */

 static void notify_thresholds(__u64 msr_val)
 {
 	/* check whether the interrupt handler is defined;
 	 * otherwise simply return
 	 */
 	if (!platform_thermal_notify)
 		return;

 	/* lower threshold reached */
 	if ((msr_val & THERM_LOG_THRESHOLD0) &&	thresh_event_valid(0))
 		platform_thermal_notify(msr_val);
 	/* higher threshold reached */
 	if ((msr_val & THERM_LOG_THRESHOLD1) && thresh_event_valid(1))
 		platform_thermal_notify(msr_val);
 }

 /* Thermal transition interrupt handler */
 static void intel_thermal_interrupt(void)
 {
 	__u64 msr_val;

 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);

 	/* Check for violation of core thermal thresholds*/
 	notify_thresholds(msr_val);

 	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
 				THERMAL_THROTTLING_EVENT,
 				CORE_LEVEL) != 0)
 		mce_log_therm_throt_event(msr_val);

 	if (this_cpu_has(X86_FEATURE_PLN))
 		therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
 					CORE_LEVEL);

 	if (this_cpu_has(X86_FEATURE_PTS)) {
 		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
 		therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
 					THERMAL_THROTTLING_EVENT,
 					PACKAGE_LEVEL);
 		if (this_cpu_has(X86_FEATURE_PLN))
 			therm_throt_process(msr_val &
 					PACKAGE_THERM_STATUS_POWER_LIMIT,
 					POWER_LIMIT_EVENT,
 					PACKAGE_LEVEL);
 	}
 }

 static void unexpected_thermal_interrupt(void)
 {
 	printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n",
 			smp_processor_id());
 }

 static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;

 asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
 {
 	irq_enter();
 	exit_idle();
 	inc_irq_stat(irq_thermal_count);
 	smp_thermal_vector();
 	irq_exit();
 	/* Ack only at the end to avoid potential reentry */
 	ack_APIC_irq();
 }

 /* Thermal monitoring depends on APIC, ACPI and clock modulation */
 static int intel_thermal_supported(struct cpuinfo_x86 *c)
 {
 	if (!cpu_has_apic)
 		return 0;
 	if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
 		return 0;
 	return 1;
 }

 void __init mcheck_intel_therm_init(void)
 {
 	/*
 	 * This function is only called on boot CPU. Save the init thermal
 	 * LVT value on BSP and use that value to restore APs' thermal LVT
 	 * entry BIOS programmed later
 	 */
 	if (intel_thermal_supported(&boot_cpu_data))
 		lvtthmr_init = apic_read(APIC_LVTTHMR);
 }

 void intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	unsigned int cpu = smp_processor_id();
 	int tm2 = 0;
 	u32 l, h;

 	if (!intel_thermal_supported(c))
 		return;

 	/*
 	 * First check if its enabled already, in which case there might
 	 * be some SMM goo which handles it, so we can't even put a handler
 	 * since it might be delivered via SMI already:
 	 */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);

 	h = lvtthmr_init;
 	/*
 	 * The initial value of thermal LVT entries on all APs always reads
 	 * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
 	 * sequence to them and LVT registers are reset to 0s except for
 	 * the mask bits which are set to 1s when APs receive INIT IPI.
 	 * If BIOS takes over the thermal interrupt and sets its interrupt
 	 * delivery mode to SMI (not fixed), it restores the value that the
 	 * BIOS has programmed on AP based on BSP's info we saved since BIOS
 	 * is always setting the same value for all threads/cores.
 	 */
 	if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
 		apic_write(APIC_LVTTHMR, lvtthmr_init);


 	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG
 		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
 		return;
 	}

 	/* Check whether a vector already exists */
 	if (h & APIC_VECTOR_MASK) {
 		printk(KERN_DEBUG
 		       "CPU%d: Thermal LVT vector (%#x) already installed\n",
 		       cpu, (h & APIC_VECTOR_MASK));
 		return;
 	}

 	/* early Pentium M models use different method for enabling TM2 */
 	if (cpu_has(c, X86_FEATURE_TM2)) {
 		if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) {
 			rdmsr(MSR_THERM2_CTL, l, h);
 			if (l & MSR_THERM2_CTL_TM_SELECT)
 				tm2 = 1;
 		} else if (l & MSR_IA32_MISC_ENABLE_TM2)
 			tm2 = 1;
 	}

 	/* We'll mask the thermal vector in the lapic till we're ready: */
 	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
 	apic_write(APIC_LVTTHMR, h);

 	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
 	if (cpu_has(c, X86_FEATURE_PLN))
 		wrmsr(MSR_IA32_THERM_INTERRUPT,
 		      l | (THERM_INT_LOW_ENABLE
 			| THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h);
 	else
 		wrmsr(MSR_IA32_THERM_INTERRUPT,
 		      l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);

 	if (cpu_has(c, X86_FEATURE_PTS)) {
 		rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
 		if (cpu_has(c, X86_FEATURE_PLN))
 			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
 			      l | (PACKAGE_THERM_INT_LOW_ENABLE
 				| PACKAGE_THERM_INT_HIGH_ENABLE
 				| PACKAGE_THERM_INT_PLN_ENABLE), h);
 		else
 			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
 			      l | (PACKAGE_THERM_INT_LOW_ENABLE
 				| PACKAGE_THERM_INT_HIGH_ENABLE), h);
 	}

 	smp_thermal_vector = intel_thermal_interrupt;

 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 	wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);

 	/* Unmask the thermal vector: */
 	l = apic_read(APIC_LVTTHMR);
 	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);

 	printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n",
 		       tm2 ? "TM2" : "TM1");

 	/* enable thermal throttle processing */
 	atomic_set(&therm_throt_en, 1);
 }
	/*
	* Thermal throttle event support code (such as syslog messaging and rate
	* limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
	*
	* This allows consistent reporting of CPU thermal throttle events.
	*
	* Maintains a counter in /sys that keeps track of the number of thermal
	* events, such that the user knows how bad the thermal problem might be
	* (since the logging to syslog and mcelog is rate limited).
	*
	* Author: Dmitriy Zavin (dmitriyz@google.com)
	*
	* Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
	* Inspired by Ross Biro's and Al Borchers' counter code.
	*/
	#include <linux/interrupt.h>
	#include <linux/notifier.h>
	#include <linux/jiffies.h>
	#include <linux/kernel.h>
	#include <linux/percpu.h>
	#include <linux/export.h>
	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/smp.h>
	#include <linux/cpu.h>

	#include <asm/processor.h>
	#include <asm/apic.h>
	#include <asm/idle.h>
	#include <asm/mce.h>
	#include <asm/msr.h>

	/* How long to wait between reporting thermal events */
	#define CHECK_INTERVAL (300 * HZ)

	#define THERMAL_THROTTLING_EVENT 0
	#define POWER_LIMIT_EVENT 1

	/*
	* Current thermal event state:
	*/
	struct _thermal_state {
	bool new_event;
	int event;
	u64 next_check;
	unsigned long count;
	unsigned long last_count;
	};

	struct thermal_state {
	struct _thermal_state core_throttle;
	struct _thermal_state core_power_limit;
	struct _thermal_state package_throttle;
	struct _thermal_state package_power_limit;
	struct _thermal_state core_thresh0;
	struct _thermal_state core_thresh1;
	};

	/* Callback to handle core threshold interrupts */
	int (*platform_thermal_notify)(__u64 msr_val);
	EXPORT_SYMBOL(platform_thermal_notify);

	static DEFINE_PER_CPU(struct thermal_state, thermal_state);

	static atomic_t therm_throt_en = ATOMIC_INIT(0);

	static u32 lvtthmr_init __read_mostly;

	#ifdef CONFIG_SYSFS
	#define define_therm_throt_device_one_ro(_name) \
	static DEVICE_ATTR(_name, 0444, \
	therm_throt_device_show_##_name, \
	NULL) \

	#define define_therm_throt_device_show_func(event, name) \
	\
	static ssize_t therm_throt_device_show_##event##_##name( \
	struct device *dev, \
	struct device_attribute *attr, \
	char *buf) \
	{ \
	unsigned int cpu = dev->id; \
	ssize_t ret; \
	\
	preempt_disable(); /* CPU hotplug */ \
	if (cpu_online(cpu)) { \
	ret = sprintf(buf, "%lu\n", \
	per_cpu(thermal_state, cpu).event.name); \
	} else \
	ret = 0; \
	preempt_enable(); \
	\
	return ret; \
	}

	define_therm_throt_device_show_func(core_throttle, count);
	define_therm_throt_device_one_ro(core_throttle_count);

	define_therm_throt_device_show_func(core_power_limit, count);
	define_therm_throt_device_one_ro(core_power_limit_count);

	define_therm_throt_device_show_func(package_throttle, count);
	define_therm_throt_device_one_ro(package_throttle_count);

	define_therm_throt_device_show_func(package_power_limit, count);
	define_therm_throt_device_one_ro(package_power_limit_count);

	static struct attribute *thermal_throttle_attrs[] = {
	&dev_attr_core_throttle_count.attr,
	NULL
	};

	static struct attribute_group thermal_attr_group = {
	.attrs = thermal_throttle_attrs,
	.name = "thermal_throttle"
	};
	#endif /* CONFIG_SYSFS */

	#define CORE_LEVEL 0
	#define PACKAGE_LEVEL 1

	/***
	* therm_throt_process - Process thermal throttling event from interrupt
	* @curr: Whether the condition is current or not (boolean), since the
	* thermal interrupt normally gets called both when the thermal
	* event begins and once the event has ended.
	*
	* This function is called by the thermal interrupt after the
	* IRQ has been acknowledged.
	*
	* It will take care of rate limiting and printing messages to the syslog.
	*
	* Returns: 0 : Event should NOT be further logged, i.e. still in
	* "timeout" from previous log message.
	* 1 : Event should be logged further, and a message has been
	* printed to the syslog.
	*/
	static int therm_throt_process(bool new_event, int event, int level)
	{
	struct _thermal_state *state;
	unsigned int this_cpu = smp_processor_id();
	bool old_event;
	u64 now;
	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);

	now = get_jiffies_64();
	if (level == CORE_LEVEL) {
	if (event == THERMAL_THROTTLING_EVENT)
	state = &pstate->core_throttle;
	else if (event == POWER_LIMIT_EVENT)
	state = &pstate->core_power_limit;
	else
	return 0;
	} else if (level == PACKAGE_LEVEL) {
	if (event == THERMAL_THROTTLING_EVENT)
	state = &pstate->package_throttle;
	else if (event == POWER_LIMIT_EVENT)
	state = &pstate->package_power_limit;
	else
	return 0;
	} else
	return 0;

	old_event = state->new_event;
	state->new_event = new_event;

	if (new_event)
	state->count++;

	if (time_before64(now, state->next_check) &&
	state->count != state->last_count)
	return 0;

	state->next_check = now + CHECK_INTERVAL;
	state->last_count = state->count;

	/* if we just entered the thermal event */
	if (new_event) {
	if (event == THERMAL_THROTTLING_EVENT)
	printk(KERN_CRIT "CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
	this_cpu,
	level == CORE_LEVEL ? "Core" : "Package",
	state->count);
	else
	printk(KERN_CRIT "CPU%d: %s power limit notification (total events = %lu)\n",
	this_cpu,
	level == CORE_LEVEL ? "Core" : "Package",
	state->count);
	return 1;
	}
	if (old_event) {
	if (event == THERMAL_THROTTLING_EVENT)
	printk(KERN_INFO "CPU%d: %s temperature/speed normal\n",
	this_cpu,
	level == CORE_LEVEL ? "Core" : "Package");
	else
	printk(KERN_INFO "CPU%d: %s power limit normal\n",
	this_cpu,
	level == CORE_LEVEL ? "Core" : "Package");
	return 1;
	}

	return 0;
	}

	static int thresh_event_valid(int event)
	{
	struct _thermal_state *state;
	unsigned int this_cpu = smp_processor_id();
	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
	u64 now = get_jiffies_64();

	state = (event == 0) ? &pstate->core_thresh0 : &pstate->core_thresh1;

	if (time_before64(now, state->next_check))
	return 0;

	state->next_check = now + CHECK_INTERVAL;
	return 1;
	}

	#ifdef CONFIG_SYSFS
	/* Add/Remove thermal_throttle interface for CPU device: */
	static __cpuinit int thermal_throttle_add_dev(struct device *dev,
	unsigned int cpu)
	{
	int err;
	struct cpuinfo_x86 *c = &cpu_data(cpu);

	err = sysfs_create_group(&dev->kobj, &thermal_attr_group);
	if (err)
	return err;

	if (cpu_has(c, X86_FEATURE_PLN))
	err = sysfs_add_file_to_group(&dev->kobj,
	&dev_attr_core_power_limit_count.attr,
	thermal_attr_group.name);
	if (cpu_has(c, X86_FEATURE_PTS)) {
	err = sysfs_add_file_to_group(&dev->kobj,
	&dev_attr_package_throttle_count.attr,
	thermal_attr_group.name);
	if (cpu_has(c, X86_FEATURE_PLN))
	err = sysfs_add_file_to_group(&dev->kobj,
	&dev_attr_package_power_limit_count.attr,
	thermal_attr_group.name);
	}

	return err;
	}

	static __cpuinit void thermal_throttle_remove_dev(struct device *dev)
	{
	sysfs_remove_group(&dev->kobj, &thermal_attr_group);
	}

	/* Mutex protecting device creation against CPU hotplug: */
	static DEFINE_MUTEX(therm_cpu_lock);

	/* Get notified when a cpu comes on/off. Be hotplug friendly. */
	static __cpuinit int
	thermal_throttle_cpu_callback(struct notifier_block *nfb,
	unsigned long action,
	void *hcpu)
	{
	unsigned int cpu = (unsigned long)hcpu;
	struct device *dev;
	int err = 0;

	dev = get_cpu_device(cpu);

	switch (action) {
	case CPU_UP_PREPARE:
	case CPU_UP_PREPARE_FROZEN:
	mutex_lock(&therm_cpu_lock);
	err = thermal_throttle_add_dev(dev, cpu);
	mutex_unlock(&therm_cpu_lock);
	WARN_ON(err);
	break;
	case CPU_UP_CANCELED:
	case CPU_UP_CANCELED_FROZEN:
	case CPU_DEAD:
	case CPU_DEAD_FROZEN:
	mutex_lock(&therm_cpu_lock);
	thermal_throttle_remove_dev(dev);
	mutex_unlock(&therm_cpu_lock);
	break;
	}
	return notifier_from_errno(err);
	}

	static struct notifier_block thermal_throttle_cpu_notifier __cpuinitdata =
	{
	.notifier_call = thermal_throttle_cpu_callback,
	};

	static __init int thermal_throttle_init_device(void)
	{
	unsigned int cpu = 0;
	int err;

	if (!atomic_read(&therm_throt_en))
	return 0;

	register_hotcpu_notifier(&thermal_throttle_cpu_notifier);

	#ifdef CONFIG_HOTPLUG_CPU
	mutex_lock(&therm_cpu_lock);
	#endif
	/* connect live CPUs to sysfs */
	for_each_online_cpu(cpu) {
	err = thermal_throttle_add_dev(get_cpu_device(cpu), cpu);
	WARN_ON(err);
	}
	#ifdef CONFIG_HOTPLUG_CPU
	mutex_unlock(&therm_cpu_lock);
	#endif

	return 0;
	}
	device_initcall(thermal_throttle_init_device);

	#endif /* CONFIG_SYSFS */

	static void notify_thresholds(__u64 msr_val)
	{
	/* check whether the interrupt handler is defined;
	* otherwise simply return
	*/
	if (!platform_thermal_notify)
	return;

	/* lower threshold reached */
	if ((msr_val & THERM_LOG_THRESHOLD0) && thresh_event_valid(0))
	platform_thermal_notify(msr_val);
	/* higher threshold reached */
	if ((msr_val & THERM_LOG_THRESHOLD1) && thresh_event_valid(1))
	platform_thermal_notify(msr_val);
	}

	/* Thermal transition interrupt handler */
	static void intel_thermal_interrupt(void)
	{
	__u64 msr_val;

	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);

	/* Check for violation of core thermal thresholds*/
	notify_thresholds(msr_val);

	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
	THERMAL_THROTTLING_EVENT,
	CORE_LEVEL) != 0)
	mce_log_therm_throt_event(msr_val);

	if (this_cpu_has(X86_FEATURE_PLN))
	therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
	POWER_LIMIT_EVENT,
	CORE_LEVEL);

	if (this_cpu_has(X86_FEATURE_PTS)) {
	rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
	therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
	THERMAL_THROTTLING_EVENT,
	PACKAGE_LEVEL);
	if (this_cpu_has(X86_FEATURE_PLN))
	therm_throt_process(msr_val &
	PACKAGE_THERM_STATUS_POWER_LIMIT,
	POWER_LIMIT_EVENT,
	PACKAGE_LEVEL);
	}
	}

	static void unexpected_thermal_interrupt(void)
	{
	printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n",
	smp_processor_id());
	}

	static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;

	asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
	{
	irq_enter();
	exit_idle();
	inc_irq_stat(irq_thermal_count);
	smp_thermal_vector();
	irq_exit();
	/* Ack only at the end to avoid potential reentry */
	ack_APIC_irq();
	}

	/* Thermal monitoring depends on APIC, ACPI and clock modulation */
	static int intel_thermal_supported(struct cpuinfo_x86 *c)
	{
	if (!cpu_has_apic)
	return 0;
	if (!cpu_has(c, X86_FEATURE_ACPI) \|\| !cpu_has(c, X86_FEATURE_ACC))
	return 0;
	return 1;
	}

	void __init mcheck_intel_therm_init(void)
	{
	/*
	* This function is only called on boot CPU. Save the init thermal
	* LVT value on BSP and use that value to restore APs' thermal LVT
	* entry BIOS programmed later
	*/
	if (intel_thermal_supported(&boot_cpu_data))
	lvtthmr_init = apic_read(APIC_LVTTHMR);
	}

	void intel_init_thermal(struct cpuinfo_x86 *c)
	{
	unsigned int cpu = smp_processor_id();
	int tm2 = 0;
	u32 l, h;

	if (!intel_thermal_supported(c))
	return;

	/*
	* First check if its enabled already, in which case there might
	* be some SMM goo which handles it, so we can't even put a handler
	* since it might be delivered via SMI already:
	*/
	rdmsr(MSR_IA32_MISC_ENABLE, l, h);

	h = lvtthmr_init;
	/*
	* The initial value of thermal LVT entries on all APs always reads
	* 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
	* sequence to them and LVT registers are reset to 0s except for
	* the mask bits which are set to 1s when APs receive INIT IPI.
	* If BIOS takes over the thermal interrupt and sets its interrupt
	* delivery mode to SMI (not fixed), it restores the value that the
	* BIOS has programmed on AP based on BSP's info we saved since BIOS
	* is always setting the same value for all threads/cores.
	*/
	if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED)
	apic_write(APIC_LVTTHMR, lvtthmr_init);


	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
	printk(KERN_DEBUG
	"CPU%d: Thermal monitoring handled by SMI\n", cpu);
	return;
	}

	/* Check whether a vector already exists */
	if (h & APIC_VECTOR_MASK) {
	printk(KERN_DEBUG
	"CPU%d: Thermal LVT vector (%#x) already installed\n",
	cpu, (h & APIC_VECTOR_MASK));
	return;
	}

	/* early Pentium M models use different method for enabling TM2 */
	if (cpu_has(c, X86_FEATURE_TM2)) {
	if (c->x86 == 6 && (c->x86_model == 9 \|\| c->x86_model == 13)) {
	rdmsr(MSR_THERM2_CTL, l, h);
	if (l & MSR_THERM2_CTL_TM_SELECT)
	tm2 = 1;
	} else if (l & MSR_IA32_MISC_ENABLE_TM2)
	tm2 = 1;
	}

	/* We'll mask the thermal vector in the lapic till we're ready: */
	h = THERMAL_APIC_VECTOR \| APIC_DM_FIXED \| APIC_LVT_MASKED;
	apic_write(APIC_LVTTHMR, h);

	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
	if (cpu_has(c, X86_FEATURE_PLN))
	wrmsr(MSR_IA32_THERM_INTERRUPT,
	l \| (THERM_INT_LOW_ENABLE
	\| THERM_INT_HIGH_ENABLE \| THERM_INT_PLN_ENABLE), h);
	else
	wrmsr(MSR_IA32_THERM_INTERRUPT,
	l \| (THERM_INT_LOW_ENABLE \| THERM_INT_HIGH_ENABLE), h);

	if (cpu_has(c, X86_FEATURE_PTS)) {
	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
	if (cpu_has(c, X86_FEATURE_PLN))
	wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
	l \| (PACKAGE_THERM_INT_LOW_ENABLE
	\| PACKAGE_THERM_INT_HIGH_ENABLE
	\| PACKAGE_THERM_INT_PLN_ENABLE), h);
	else
	wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
	l \| (PACKAGE_THERM_INT_LOW_ENABLE
	\| PACKAGE_THERM_INT_HIGH_ENABLE), h);
	}

	smp_thermal_vector = intel_thermal_interrupt;

	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
	wrmsr(MSR_IA32_MISC_ENABLE, l \| MSR_IA32_MISC_ENABLE_TM1, h);

	/* Unmask the thermal vector: */
	l = apic_read(APIC_LVTTHMR);
	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);

	printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n",
	tm2 ? "TM2" : "TM1");

	/* enable thermal throttle processing */
	atomic_set(&therm_throt_en, 1);
	}