| /****************************************************************************** |
| * |
| * Copyright(c) 2009-2012 Realtek Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #include "../wifi.h" |
| #include "reg.h" |
| #include "def.h" |
| #include "phy.h" |
| #include "rf.h" |
| #include "dm.h" |
| |
| static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw); |
| |
| void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| |
| switch (bandwidth) { |
| case HT_CHANNEL_WIDTH_20: |
| rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & |
| 0xfffff3ff) | 0x0400); |
| rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, |
| rtlphy->rfreg_chnlval[0]); |
| break; |
| case HT_CHANNEL_WIDTH_20_40: |
| rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & |
| 0xfffff3ff)); |
| rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, |
| rtlphy->rfreg_chnlval[0]); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "unknown bandwidth: %#X\n", bandwidth); |
| break; |
| } |
| } |
| |
| void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw, |
| u8 *ppowerlevel) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u32 tx_agc[2] = { 0, 0 }, tmpval = 0; |
| bool turbo_scanoff = false; |
| u8 idx1, idx2; |
| u8 *ptr; |
| |
| if (rtlhal->interface == INTF_PCI) { |
| if (rtlefuse->eeprom_regulatory != 0) |
| turbo_scanoff = true; |
| } else { |
| if ((rtlefuse->eeprom_regulatory != 0) || |
| (rtlefuse->external_pa)) |
| turbo_scanoff = true; |
| } |
| if (mac->act_scanning) { |
| tx_agc[RF90_PATH_A] = 0x3f3f3f3f; |
| tx_agc[RF90_PATH_B] = 0x3f3f3f3f; |
| for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { |
| tx_agc[idx1] = ppowerlevel[idx1] | |
| (ppowerlevel[idx1] << 8) | |
| (ppowerlevel[idx1] << 16) | |
| (ppowerlevel[idx1] << 24); |
| if (rtlhal->interface == INTF_USB) { |
| if (tx_agc[idx1] > 0x20 && |
| rtlefuse->external_pa) |
| tx_agc[idx1] = 0x20; |
| } |
| } |
| } else { |
| if (rtlpriv->dm.dynamic_txhighpower_lvl == |
| TXHIGHPWRLEVEL_LEVEL1) { |
| tx_agc[RF90_PATH_A] = 0x10101010; |
| tx_agc[RF90_PATH_B] = 0x10101010; |
| } else if (rtlpriv->dm.dynamic_txhighpower_lvl == |
| TXHIGHPWRLEVEL_LEVEL2) { |
| tx_agc[RF90_PATH_A] = 0x00000000; |
| tx_agc[RF90_PATH_B] = 0x00000000; |
| } else { |
| for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { |
| tx_agc[idx1] = ppowerlevel[idx1] | |
| (ppowerlevel[idx1] << 8) | |
| (ppowerlevel[idx1] << 16) | |
| (ppowerlevel[idx1] << 24); |
| } |
| if (rtlefuse->eeprom_regulatory == 0) { |
| tmpval = (rtlphy->mcs_offset[0][6]) + |
| (rtlphy->mcs_offset[0][7] << 8); |
| tx_agc[RF90_PATH_A] += tmpval; |
| tmpval = (rtlphy->mcs_offset[0][14]) + |
| (rtlphy->mcs_offset[0][15] << 24); |
| tx_agc[RF90_PATH_B] += tmpval; |
| } |
| } |
| } |
| for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { |
| ptr = (u8 *) (&(tx_agc[idx1])); |
| for (idx2 = 0; idx2 < 4; idx2++) { |
| if (*ptr > RF6052_MAX_TX_PWR) |
| *ptr = RF6052_MAX_TX_PWR; |
| ptr++; |
| } |
| } |
| tmpval = tx_agc[RF90_PATH_A] & 0xff; |
| rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval); |
| |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", |
| tmpval, RTXAGC_A_CCK1_MCS32); |
| |
| tmpval = tx_agc[RF90_PATH_A] >> 8; |
| if (mac->mode == WIRELESS_MODE_B) |
| tmpval = tmpval & 0xff00ffff; |
| rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", |
| tmpval, RTXAGC_B_CCK11_A_CCK2_11); |
| tmpval = tx_agc[RF90_PATH_B] >> 24; |
| rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", |
| tmpval, RTXAGC_B_CCK11_A_CCK2_11); |
| tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff; |
| rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", |
| tmpval, RTXAGC_B_CCK1_55_MCS32); |
| } |
| |
| static void rtl92c_phy_get_power_base(struct ieee80211_hw *hw, |
| u8 *ppowerlevel, u8 channel, |
| u32 *ofdmbase, u32 *mcsbase) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u32 powerBase0, powerBase1; |
| u8 legacy_pwrdiff = 0, ht20_pwrdiff = 0; |
| u8 i, powerlevel[2]; |
| |
| for (i = 0; i < 2; i++) { |
| powerlevel[i] = ppowerlevel[i]; |
| legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff[i][channel - 1]; |
| powerBase0 = powerlevel[i] + legacy_pwrdiff; |
| powerBase0 = (powerBase0 << 24) | (powerBase0 << 16) | |
| (powerBase0 << 8) | powerBase0; |
| *(ofdmbase + i) = powerBase0; |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| " [OFDM power base index rf(%c) = 0x%x]\n", |
| i == 0 ? 'A' : 'B', *(ofdmbase + i)); |
| } |
| for (i = 0; i < 2; i++) { |
| if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) { |
| ht20_pwrdiff = rtlefuse->txpwr_ht20diff[i][channel - 1]; |
| powerlevel[i] += ht20_pwrdiff; |
| } |
| powerBase1 = powerlevel[i]; |
| powerBase1 = (powerBase1 << 24) | |
| (powerBase1 << 16) | (powerBase1 << 8) | powerBase1; |
| *(mcsbase + i) = powerBase1; |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| " [MCS power base index rf(%c) = 0x%x]\n", |
| i == 0 ? 'A' : 'B', *(mcsbase + i)); |
| } |
| } |
| |
| static void _rtl92c_get_txpower_writeval_by_regulatory(struct ieee80211_hw *hw, |
| u8 channel, u8 index, |
| u32 *powerBase0, |
| u32 *powerBase1, |
| u32 *p_outwriteval) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u8 i, chnlgroup = 0, pwr_diff_limit[4]; |
| u32 writeVal, customer_limit, rf; |
| |
| for (rf = 0; rf < 2; rf++) { |
| switch (rtlefuse->eeprom_regulatory) { |
| case 0: |
| chnlgroup = 0; |
| writeVal = rtlphy->mcs_offset |
| [chnlgroup][index + (rf ? 8 : 0)] |
| + ((index < 2) ? powerBase0[rf] : powerBase1[rf]); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "RTK better performance,writeVal(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', writeVal); |
| break; |
| case 1: |
| if (rtlphy->pwrgroup_cnt == 1) |
| chnlgroup = 0; |
| if (rtlphy->pwrgroup_cnt >= 3) { |
| if (channel <= 3) |
| chnlgroup = 0; |
| else if (channel >= 4 && channel <= 9) |
| chnlgroup = 1; |
| else if (channel > 9) |
| chnlgroup = 2; |
| if (rtlphy->current_chan_bw == |
| HT_CHANNEL_WIDTH_20) |
| chnlgroup++; |
| else |
| chnlgroup += 4; |
| } |
| writeVal = rtlphy->mcs_offset[chnlgroup][index + |
| (rf ? 8 : 0)] + |
| ((index < 2) ? powerBase0[rf] : |
| powerBase1[rf]); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Realtek regulatory, 20MHz, writeVal(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', writeVal); |
| break; |
| case 2: |
| writeVal = ((index < 2) ? powerBase0[rf] : |
| powerBase1[rf]); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Better regulatory,writeVal(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', writeVal); |
| break; |
| case 3: |
| chnlgroup = 0; |
| if (rtlphy->current_chan_bw == |
| HT_CHANNEL_WIDTH_20_40) { |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "customer's limit, 40MHzrf(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', |
| rtlefuse->pwrgroup_ht40[rf] |
| [channel - 1]); |
| } else { |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "customer's limit, 20MHz rf(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', |
| rtlefuse->pwrgroup_ht20[rf] |
| [channel - 1]); |
| } |
| for (i = 0; i < 4; i++) { |
| pwr_diff_limit[i] = (u8) ((rtlphy->mcs_offset |
| [chnlgroup][index + (rf ? 8 : 0)] |
| & (0x7f << (i * 8))) >> (i * 8)); |
| if (rtlphy->current_chan_bw == |
| HT_CHANNEL_WIDTH_20_40) { |
| if (pwr_diff_limit[i] > |
| rtlefuse->pwrgroup_ht40[rf] |
| [channel - 1]) |
| pwr_diff_limit[i] = rtlefuse-> |
| pwrgroup_ht40[rf] |
| [channel - 1]; |
| } else { |
| if (pwr_diff_limit[i] > |
| rtlefuse->pwrgroup_ht20[rf] |
| [channel - 1]) |
| pwr_diff_limit[i] = |
| rtlefuse->pwrgroup_ht20[rf] |
| [channel - 1]; |
| } |
| } |
| customer_limit = (pwr_diff_limit[3] << 24) | |
| (pwr_diff_limit[2] << 16) | |
| (pwr_diff_limit[1] << 8) | (pwr_diff_limit[0]); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Customer's limit rf(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', customer_limit); |
| writeVal = customer_limit + ((index < 2) ? |
| powerBase0[rf] : powerBase1[rf]); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Customer, writeVal rf(%c)= 0x%x\n", |
| rf == 0 ? 'A' : 'B', writeVal); |
| break; |
| default: |
| chnlgroup = 0; |
| writeVal = rtlphy->mcs_offset[chnlgroup] |
| [index + (rf ? 8 : 0)] + ((index < 2) ? |
| powerBase0[rf] : powerBase1[rf]); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "RTK better performance, writeValrf(%c) = 0x%x\n", |
| rf == 0 ? 'A' : 'B', writeVal); |
| break; |
| } |
| if (rtlpriv->dm.dynamic_txhighpower_lvl == |
| TXHIGHPWRLEVEL_LEVEL1) |
| writeVal = 0x14141414; |
| else if (rtlpriv->dm.dynamic_txhighpower_lvl == |
| TXHIGHPWRLEVEL_LEVEL2) |
| writeVal = 0x00000000; |
| if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1) |
| writeVal = writeVal - 0x06060606; |
| else if (rtlpriv->dm.dynamic_txhighpower_lvl == |
| TXHIGHPWRLEVEL_BT2) |
| writeVal = writeVal; |
| *(p_outwriteval + rf) = writeVal; |
| } |
| } |
| |
| static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw, |
| u8 index, u32 *pValue) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u16 regoffset_a[6] = { |
| RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24, |
| RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04, |
| RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12 |
| }; |
| u16 regoffset_b[6] = { |
| RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24, |
| RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04, |
| RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12 |
| }; |
| u8 i, rf, pwr_val[4]; |
| u32 writeVal; |
| u16 regoffset; |
| |
| for (rf = 0; rf < 2; rf++) { |
| writeVal = pValue[rf]; |
| for (i = 0; i < 4; i++) { |
| pwr_val[i] = (u8)((writeVal & (0x7f << (i * 8))) >> |
| (i * 8)); |
| if (pwr_val[i] > RF6052_MAX_TX_PWR) |
| pwr_val[i] = RF6052_MAX_TX_PWR; |
| } |
| writeVal = (pwr_val[3] << 24) | (pwr_val[2] << 16) | |
| (pwr_val[1] << 8) | pwr_val[0]; |
| if (rf == 0) |
| regoffset = regoffset_a[index]; |
| else |
| regoffset = regoffset_b[index]; |
| rtl_set_bbreg(hw, regoffset, MASKDWORD, writeVal); |
| RTPRINT(rtlpriv, FPHY, PHY_TXPWR, |
| "Set 0x%x = %08x\n", regoffset, writeVal); |
| if (((get_rf_type(rtlphy) == RF_2T2R) && |
| (regoffset == RTXAGC_A_MCS15_MCS12 || |
| regoffset == RTXAGC_B_MCS15_MCS12)) || |
| ((get_rf_type(rtlphy) != RF_2T2R) && |
| (regoffset == RTXAGC_A_MCS07_MCS04 || |
| regoffset == RTXAGC_B_MCS07_MCS04))) { |
| writeVal = pwr_val[3]; |
| if (regoffset == RTXAGC_A_MCS15_MCS12 || |
| regoffset == RTXAGC_A_MCS07_MCS04) |
| regoffset = 0xc90; |
| if (regoffset == RTXAGC_B_MCS15_MCS12 || |
| regoffset == RTXAGC_B_MCS07_MCS04) |
| regoffset = 0xc98; |
| for (i = 0; i < 3; i++) { |
| if (i != 2) |
| writeVal = (writeVal > 8) ? |
| (writeVal - 8) : 0; |
| else |
| writeVal = (writeVal > 6) ? |
| (writeVal - 6) : 0; |
| rtl_write_byte(rtlpriv, (u32)(regoffset + i), |
| (u8)writeVal); |
| } |
| } |
| } |
| } |
| |
| void rtl92cu_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw, |
| u8 *ppowerlevel, u8 channel) |
| { |
| u32 writeVal[2], powerBase0[2], powerBase1[2]; |
| u8 index = 0; |
| |
| rtl92c_phy_get_power_base(hw, ppowerlevel, |
| channel, &powerBase0[0], &powerBase1[0]); |
| for (index = 0; index < 6; index++) { |
| _rtl92c_get_txpower_writeval_by_regulatory(hw, |
| channel, index, |
| &powerBase0[0], |
| &powerBase1[0], |
| &writeVal[0]); |
| _rtl92c_write_ofdm_power_reg(hw, index, &writeVal[0]); |
| } |
| } |
| |
| bool rtl92cu_phy_rf6052_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| bool rtstatus = true; |
| u8 b_reg_hwparafile = 1; |
| |
| if (rtlphy->rf_type == RF_1T1R) |
| rtlphy->num_total_rfpath = 1; |
| else |
| rtlphy->num_total_rfpath = 2; |
| if (b_reg_hwparafile == 1) |
| rtstatus = _rtl92c_phy_rf6052_config_parafile(hw); |
| return rtstatus; |
| } |
| |
| static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| u32 u4_regvalue = 0; |
| u8 rfpath; |
| bool rtstatus = true; |
| struct bb_reg_def *pphyreg; |
| |
| for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) { |
| pphyreg = &rtlphy->phyreg_def[rfpath]; |
| switch (rfpath) { |
| case RF90_PATH_A: |
| case RF90_PATH_C: |
| u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV); |
| break; |
| case RF90_PATH_B: |
| case RF90_PATH_D: |
| u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV << 16); |
| break; |
| } |
| rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1); |
| udelay(1); |
| rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1); |
| udelay(1); |
| rtl_set_bbreg(hw, pphyreg->rfhssi_para2, |
| B3WIREADDREAALENGTH, 0x0); |
| udelay(1); |
| rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0); |
| udelay(1); |
| switch (rfpath) { |
| case RF90_PATH_A: |
| rtstatus = rtl92cu_phy_config_rf_with_headerfile(hw, |
| (enum radio_path) rfpath); |
| break; |
| case RF90_PATH_B: |
| rtstatus = rtl92cu_phy_config_rf_with_headerfile(hw, |
| (enum radio_path) rfpath); |
| break; |
| case RF90_PATH_C: |
| break; |
| case RF90_PATH_D: |
| break; |
| } |
| switch (rfpath) { |
| case RF90_PATH_A: |
| case RF90_PATH_C: |
| rtl_set_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV, u4_regvalue); |
| break; |
| case RF90_PATH_B: |
| case RF90_PATH_D: |
| rtl_set_bbreg(hw, pphyreg->rfintfs, |
| BRFSI_RFENV << 16, u4_regvalue); |
| break; |
| } |
| if (!rtstatus) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Radio[%d] Fail!!", rfpath); |
| goto phy_rf_cfg_fail; |
| } |
| } |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "<---\n"); |
| return rtstatus; |
| phy_rf_cfg_fail: |
| return rtstatus; |
| } |
