| /* |
| * Copyright © 2006 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * |
| */ |
| #include <linux/dmi.h> |
| #include <drm/drm_dp_helper.h> |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "intel_bios.h" |
| |
| #define SLAVE_ADDR1 0x70 |
| #define SLAVE_ADDR2 0x72 |
| |
| static int panel_type; |
| |
| static void * |
| find_section(struct bdb_header *bdb, int section_id) |
| { |
| u8 *base = (u8 *)bdb; |
| int index = 0; |
| u16 total, current_size; |
| u8 current_id; |
| |
| /* skip to first section */ |
| index += bdb->header_size; |
| total = bdb->bdb_size; |
| |
| /* walk the sections looking for section_id */ |
| while (index < total) { |
| current_id = *(base + index); |
| index++; |
| current_size = *((u16 *)(base + index)); |
| index += 2; |
| if (current_id == section_id) |
| return base + index; |
| index += current_size; |
| } |
| |
| return NULL; |
| } |
| |
| static u16 |
| get_blocksize(void *p) |
| { |
| u16 *block_ptr, block_size; |
| |
| block_ptr = (u16 *)((char *)p - 2); |
| block_size = *block_ptr; |
| return block_size; |
| } |
| |
| static void |
| fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, |
| const struct lvds_dvo_timing *dvo_timing) |
| { |
| panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | |
| dvo_timing->hactive_lo; |
| panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + |
| ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); |
| panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + |
| dvo_timing->hsync_pulse_width; |
| panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + |
| ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); |
| |
| panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | |
| dvo_timing->vactive_lo; |
| panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + |
| dvo_timing->vsync_off; |
| panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + |
| dvo_timing->vsync_pulse_width; |
| panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + |
| ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); |
| panel_fixed_mode->clock = dvo_timing->clock * 10; |
| panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; |
| |
| if (dvo_timing->hsync_positive) |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (dvo_timing->vsync_positive) |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| /* Some VBTs have bogus h/vtotal values */ |
| if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) |
| panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; |
| if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) |
| panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; |
| |
| drm_mode_set_name(panel_fixed_mode); |
| } |
| |
| static bool |
| lvds_dvo_timing_equal_size(const struct lvds_dvo_timing *a, |
| const struct lvds_dvo_timing *b) |
| { |
| if (a->hactive_hi != b->hactive_hi || |
| a->hactive_lo != b->hactive_lo) |
| return false; |
| |
| if (a->hsync_off_hi != b->hsync_off_hi || |
| a->hsync_off_lo != b->hsync_off_lo) |
| return false; |
| |
| if (a->hsync_pulse_width != b->hsync_pulse_width) |
| return false; |
| |
| if (a->hblank_hi != b->hblank_hi || |
| a->hblank_lo != b->hblank_lo) |
| return false; |
| |
| if (a->vactive_hi != b->vactive_hi || |
| a->vactive_lo != b->vactive_lo) |
| return false; |
| |
| if (a->vsync_off != b->vsync_off) |
| return false; |
| |
| if (a->vsync_pulse_width != b->vsync_pulse_width) |
| return false; |
| |
| if (a->vblank_hi != b->vblank_hi || |
| a->vblank_lo != b->vblank_lo) |
| return false; |
| |
| return true; |
| } |
| |
| static const struct lvds_dvo_timing * |
| get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data, |
| const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs, |
| int index) |
| { |
| /* |
| * the size of fp_timing varies on the different platform. |
| * So calculate the DVO timing relative offset in LVDS data |
| * entry to get the DVO timing entry |
| */ |
| |
| int lfp_data_size = |
| lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - |
| lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; |
| int dvo_timing_offset = |
| lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset - |
| lvds_lfp_data_ptrs->ptr[0].fp_timing_offset; |
| char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index; |
| |
| return (struct lvds_dvo_timing *)(entry + dvo_timing_offset); |
| } |
| |
| /* get lvds_fp_timing entry |
| * this function may return NULL if the corresponding entry is invalid |
| */ |
| static const struct lvds_fp_timing * |
| get_lvds_fp_timing(const struct bdb_header *bdb, |
| const struct bdb_lvds_lfp_data *data, |
| const struct bdb_lvds_lfp_data_ptrs *ptrs, |
| int index) |
| { |
| size_t data_ofs = (const u8 *)data - (const u8 *)bdb; |
| u16 data_size = ((const u16 *)data)[-1]; /* stored in header */ |
| size_t ofs; |
| |
| if (index >= ARRAY_SIZE(ptrs->ptr)) |
| return NULL; |
| ofs = ptrs->ptr[index].fp_timing_offset; |
| if (ofs < data_ofs || |
| ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size) |
| return NULL; |
| return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs); |
| } |
| |
| /* Try to find integrated panel data */ |
| static void |
| parse_lfp_panel_data(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| const struct bdb_lvds_options *lvds_options; |
| const struct bdb_lvds_lfp_data *lvds_lfp_data; |
| const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; |
| const struct lvds_dvo_timing *panel_dvo_timing; |
| const struct lvds_fp_timing *fp_timing; |
| struct drm_display_mode *panel_fixed_mode; |
| int i, downclock; |
| |
| lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); |
| if (!lvds_options) |
| return; |
| |
| dev_priv->vbt.lvds_dither = lvds_options->pixel_dither; |
| if (lvds_options->panel_type == 0xff) |
| return; |
| |
| panel_type = lvds_options->panel_type; |
| |
| lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); |
| if (!lvds_lfp_data) |
| return; |
| |
| lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); |
| if (!lvds_lfp_data_ptrs) |
| return; |
| |
| dev_priv->vbt.lvds_vbt = 1; |
| |
| panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, |
| lvds_lfp_data_ptrs, |
| lvds_options->panel_type); |
| |
| panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); |
| if (!panel_fixed_mode) |
| return; |
| |
| fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing); |
| |
| dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode; |
| |
| DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n"); |
| drm_mode_debug_printmodeline(panel_fixed_mode); |
| |
| /* |
| * Iterate over the LVDS panel timing info to find the lowest clock |
| * for the native resolution. |
| */ |
| downclock = panel_dvo_timing->clock; |
| for (i = 0; i < 16; i++) { |
| const struct lvds_dvo_timing *dvo_timing; |
| |
| dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, |
| lvds_lfp_data_ptrs, |
| i); |
| if (lvds_dvo_timing_equal_size(dvo_timing, panel_dvo_timing) && |
| dvo_timing->clock < downclock) |
| downclock = dvo_timing->clock; |
| } |
| |
| if (downclock < panel_dvo_timing->clock && i915.lvds_downclock) { |
| dev_priv->lvds_downclock_avail = 1; |
| dev_priv->lvds_downclock = downclock * 10; |
| DRM_DEBUG_KMS("LVDS downclock is found in VBT. " |
| "Normal Clock %dKHz, downclock %dKHz\n", |
| panel_fixed_mode->clock, 10*downclock); |
| } |
| |
| fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data, |
| lvds_lfp_data_ptrs, |
| lvds_options->panel_type); |
| if (fp_timing) { |
| /* check the resolution, just to be sure */ |
| if (fp_timing->x_res == panel_fixed_mode->hdisplay && |
| fp_timing->y_res == panel_fixed_mode->vdisplay) { |
| dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val; |
| DRM_DEBUG_KMS("VBT initial LVDS value %x\n", |
| dev_priv->vbt.bios_lvds_val); |
| } |
| } |
| } |
| |
| static void |
| parse_lfp_backlight(struct drm_i915_private *dev_priv, struct bdb_header *bdb) |
| { |
| const struct bdb_lfp_backlight_data *backlight_data; |
| const struct bdb_lfp_backlight_data_entry *entry; |
| |
| /* Err to enabling backlight if no backlight block. */ |
| dev_priv->vbt.backlight.present = true; |
| |
| backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT); |
| if (!backlight_data) |
| return; |
| |
| if (backlight_data->entry_size != sizeof(backlight_data->data[0])) { |
| DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n", |
| backlight_data->entry_size); |
| return; |
| } |
| |
| entry = &backlight_data->data[panel_type]; |
| |
| dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM; |
| if (!dev_priv->vbt.backlight.present) { |
| DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n", |
| entry->type); |
| return; |
| } |
| |
| dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; |
| dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; |
| DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, " |
| "active %s, min brightness %u, level %u\n", |
| dev_priv->vbt.backlight.pwm_freq_hz, |
| dev_priv->vbt.backlight.active_low_pwm ? "low" : "high", |
| entry->min_brightness, |
| backlight_data->level[panel_type]); |
| } |
| |
| /* Try to find sdvo panel data */ |
| static void |
| parse_sdvo_panel_data(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct lvds_dvo_timing *dvo_timing; |
| struct drm_display_mode *panel_fixed_mode; |
| int index; |
| |
| index = i915.vbt_sdvo_panel_type; |
| if (index == -2) { |
| DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n"); |
| return; |
| } |
| |
| if (index == -1) { |
| struct bdb_sdvo_lvds_options *sdvo_lvds_options; |
| |
| sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); |
| if (!sdvo_lvds_options) |
| return; |
| |
| index = sdvo_lvds_options->panel_type; |
| } |
| |
| dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS); |
| if (!dvo_timing) |
| return; |
| |
| panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); |
| if (!panel_fixed_mode) |
| return; |
| |
| fill_detail_timing_data(panel_fixed_mode, dvo_timing + index); |
| |
| dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode; |
| |
| DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n"); |
| drm_mode_debug_printmodeline(panel_fixed_mode); |
| } |
| |
| static int intel_bios_ssc_frequency(struct drm_device *dev, |
| bool alternate) |
| { |
| switch (INTEL_INFO(dev)->gen) { |
| case 2: |
| return alternate ? 66667 : 48000; |
| case 3: |
| case 4: |
| return alternate ? 100000 : 96000; |
| default: |
| return alternate ? 100000 : 120000; |
| } |
| } |
| |
| static void |
| parse_general_features(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| struct bdb_general_features *general; |
| |
| general = find_section(bdb, BDB_GENERAL_FEATURES); |
| if (general) { |
| dev_priv->vbt.int_tv_support = general->int_tv_support; |
| dev_priv->vbt.int_crt_support = general->int_crt_support; |
| dev_priv->vbt.lvds_use_ssc = general->enable_ssc; |
| dev_priv->vbt.lvds_ssc_freq = |
| intel_bios_ssc_frequency(dev, general->ssc_freq); |
| dev_priv->vbt.display_clock_mode = general->display_clock_mode; |
| dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted; |
| DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n", |
| dev_priv->vbt.int_tv_support, |
| dev_priv->vbt.int_crt_support, |
| dev_priv->vbt.lvds_use_ssc, |
| dev_priv->vbt.lvds_ssc_freq, |
| dev_priv->vbt.display_clock_mode, |
| dev_priv->vbt.fdi_rx_polarity_inverted); |
| } |
| } |
| |
| static void |
| parse_general_definitions(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct bdb_general_definitions *general; |
| |
| general = find_section(bdb, BDB_GENERAL_DEFINITIONS); |
| if (general) { |
| u16 block_size = get_blocksize(general); |
| if (block_size >= sizeof(*general)) { |
| int bus_pin = general->crt_ddc_gmbus_pin; |
| DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin); |
| if (intel_gmbus_is_port_valid(bus_pin)) |
| dev_priv->vbt.crt_ddc_pin = bus_pin; |
| } else { |
| DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n", |
| block_size); |
| } |
| } |
| } |
| |
| static void |
| parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct sdvo_device_mapping *p_mapping; |
| struct bdb_general_definitions *p_defs; |
| union child_device_config *p_child; |
| int i, child_device_num, count; |
| u16 block_size; |
| |
| p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); |
| if (!p_defs) { |
| DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n"); |
| return; |
| } |
| /* judge whether the size of child device meets the requirements. |
| * If the child device size obtained from general definition block |
| * is different with sizeof(struct child_device_config), skip the |
| * parsing of sdvo device info |
| */ |
| if (p_defs->child_dev_size != sizeof(*p_child)) { |
| /* different child dev size . Ignore it */ |
| DRM_DEBUG_KMS("different child size is found. Invalid.\n"); |
| return; |
| } |
| /* get the block size of general definitions */ |
| block_size = get_blocksize(p_defs); |
| /* get the number of child device */ |
| child_device_num = (block_size - sizeof(*p_defs)) / |
| sizeof(*p_child); |
| count = 0; |
| for (i = 0; i < child_device_num; i++) { |
| p_child = &(p_defs->devices[i]); |
| if (!p_child->old.device_type) { |
| /* skip the device block if device type is invalid */ |
| continue; |
| } |
| if (p_child->old.slave_addr != SLAVE_ADDR1 && |
| p_child->old.slave_addr != SLAVE_ADDR2) { |
| /* |
| * If the slave address is neither 0x70 nor 0x72, |
| * it is not a SDVO device. Skip it. |
| */ |
| continue; |
| } |
| if (p_child->old.dvo_port != DEVICE_PORT_DVOB && |
| p_child->old.dvo_port != DEVICE_PORT_DVOC) { |
| /* skip the incorrect SDVO port */ |
| DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); |
| continue; |
| } |
| DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" |
| " %s port\n", |
| p_child->old.slave_addr, |
| (p_child->old.dvo_port == DEVICE_PORT_DVOB) ? |
| "SDVOB" : "SDVOC"); |
| p_mapping = &(dev_priv->sdvo_mappings[p_child->old.dvo_port - 1]); |
| if (!p_mapping->initialized) { |
| p_mapping->dvo_port = p_child->old.dvo_port; |
| p_mapping->slave_addr = p_child->old.slave_addr; |
| p_mapping->dvo_wiring = p_child->old.dvo_wiring; |
| p_mapping->ddc_pin = p_child->old.ddc_pin; |
| p_mapping->i2c_pin = p_child->old.i2c_pin; |
| p_mapping->initialized = 1; |
| DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", |
| p_mapping->dvo_port, |
| p_mapping->slave_addr, |
| p_mapping->dvo_wiring, |
| p_mapping->ddc_pin, |
| p_mapping->i2c_pin); |
| } else { |
| DRM_DEBUG_KMS("Maybe one SDVO port is shared by " |
| "two SDVO device.\n"); |
| } |
| if (p_child->old.slave2_addr) { |
| /* Maybe this is a SDVO device with multiple inputs */ |
| /* And the mapping info is not added */ |
| DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" |
| " is a SDVO device with multiple inputs.\n"); |
| } |
| count++; |
| } |
| |
| if (!count) { |
| /* No SDVO device info is found */ |
| DRM_DEBUG_KMS("No SDVO device info is found in VBT\n"); |
| } |
| return; |
| } |
| |
| static void |
| parse_driver_features(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct bdb_driver_features *driver; |
| |
| driver = find_section(bdb, BDB_DRIVER_FEATURES); |
| if (!driver) |
| return; |
| |
| if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP) |
| dev_priv->vbt.edp_support = 1; |
| |
| if (driver->dual_frequency) |
| dev_priv->render_reclock_avail = true; |
| } |
| |
| static void |
| parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) |
| { |
| struct bdb_edp *edp; |
| struct edp_power_seq *edp_pps; |
| struct edp_link_params *edp_link_params; |
| |
| edp = find_section(bdb, BDB_EDP); |
| if (!edp) { |
| if (dev_priv->vbt.edp_support) |
| DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n"); |
| return; |
| } |
| |
| switch ((edp->color_depth >> (panel_type * 2)) & 3) { |
| case EDP_18BPP: |
| dev_priv->vbt.edp_bpp = 18; |
| break; |
| case EDP_24BPP: |
| dev_priv->vbt.edp_bpp = 24; |
| break; |
| case EDP_30BPP: |
| dev_priv->vbt.edp_bpp = 30; |
| break; |
| } |
| |
| /* Get the eDP sequencing and link info */ |
| edp_pps = &edp->power_seqs[panel_type]; |
| edp_link_params = &edp->link_params[panel_type]; |
| |
| dev_priv->vbt.edp_pps = *edp_pps; |
| |
| switch (edp_link_params->rate) { |
| case EDP_RATE_1_62: |
| dev_priv->vbt.edp_rate = DP_LINK_BW_1_62; |
| break; |
| case EDP_RATE_2_7: |
| dev_priv->vbt.edp_rate = DP_LINK_BW_2_7; |
| break; |
| default: |
| DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n", |
| edp_link_params->rate); |
| break; |
| } |
| |
| switch (edp_link_params->lanes) { |
| case EDP_LANE_1: |
| dev_priv->vbt.edp_lanes = 1; |
| break; |
| case EDP_LANE_2: |
| dev_priv->vbt.edp_lanes = 2; |
| break; |
| case EDP_LANE_4: |
| dev_priv->vbt.edp_lanes = 4; |
| break; |
| default: |
| DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n", |
| edp_link_params->lanes); |
| break; |
| } |
| |
| switch (edp_link_params->preemphasis) { |
| case EDP_PREEMPHASIS_NONE: |
| dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_0; |
| break; |
| case EDP_PREEMPHASIS_3_5dB: |
| dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5; |
| break; |
| case EDP_PREEMPHASIS_6dB: |
| dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_6; |
| break; |
| case EDP_PREEMPHASIS_9_5dB: |
| dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5; |
| break; |
| default: |
| DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n", |
| edp_link_params->preemphasis); |
| break; |
| } |
| |
| switch (edp_link_params->vswing) { |
| case EDP_VSWING_0_4V: |
| dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_400; |
| break; |
| case EDP_VSWING_0_6V: |
| dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_600; |
| break; |
| case EDP_VSWING_0_8V: |
| dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_800; |
| break; |
| case EDP_VSWING_1_2V: |
| dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_1200; |
| break; |
| default: |
| DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n", |
| edp_link_params->vswing); |
| break; |
| } |
| } |
| |
| static void |
| parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb) |
| { |
| struct bdb_mipi *mipi; |
| |
| mipi = find_section(bdb, BDB_MIPI_CONFIG); |
| if (!mipi) { |
| DRM_DEBUG_KMS("No MIPI BDB found"); |
| return; |
| } |
| |
| /* XXX: add more info */ |
| dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID; |
| } |
| |
| static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, |
| struct bdb_header *bdb) |
| { |
| union child_device_config *it, *child = NULL; |
| struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; |
| uint8_t hdmi_level_shift; |
| int i, j; |
| bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; |
| uint8_t aux_channel; |
| /* Each DDI port can have more than one value on the "DVO Port" field, |
| * so look for all the possible values for each port and abort if more |
| * than one is found. */ |
| int dvo_ports[][2] = { |
| {DVO_PORT_HDMIA, DVO_PORT_DPA}, |
| {DVO_PORT_HDMIB, DVO_PORT_DPB}, |
| {DVO_PORT_HDMIC, DVO_PORT_DPC}, |
| {DVO_PORT_HDMID, DVO_PORT_DPD}, |
| {DVO_PORT_CRT, -1 /* Port E can only be DVO_PORT_CRT */ }, |
| }; |
| |
| /* Find the child device to use, abort if more than one found. */ |
| for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { |
| it = dev_priv->vbt.child_dev + i; |
| |
| for (j = 0; j < 2; j++) { |
| if (dvo_ports[port][j] == -1) |
| break; |
| |
| if (it->common.dvo_port == dvo_ports[port][j]) { |
| if (child) { |
| DRM_DEBUG_KMS("More than one child device for port %c in VBT.\n", |
| port_name(port)); |
| return; |
| } |
| child = it; |
| } |
| } |
| } |
| if (!child) |
| return; |
| |
| aux_channel = child->raw[25]; |
| |
| is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; |
| is_dp = child->common.device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT; |
| is_crt = child->common.device_type & DEVICE_TYPE_ANALOG_OUTPUT; |
| is_hdmi = is_dvi && (child->common.device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0; |
| is_edp = is_dp && (child->common.device_type & DEVICE_TYPE_INTERNAL_CONNECTOR); |
| |
| info->supports_dvi = is_dvi; |
| info->supports_hdmi = is_hdmi; |
| info->supports_dp = is_dp; |
| |
| DRM_DEBUG_KMS("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d\n", |
| port_name(port), is_dp, is_hdmi, is_dvi, is_edp, is_crt); |
| |
| if (is_edp && is_dvi) |
| DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n", |
| port_name(port)); |
| if (is_crt && port != PORT_E) |
| DRM_DEBUG_KMS("Port %c is analog\n", port_name(port)); |
| if (is_crt && (is_dvi || is_dp)) |
| DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n", |
| port_name(port)); |
| if (is_dvi && (port == PORT_A || port == PORT_E)) |
| DRM_DEBUG_KMS("Port %c is TMDS compabile\n", port_name(port)); |
| if (!is_dvi && !is_dp && !is_crt) |
| DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n", |
| port_name(port)); |
| if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E)) |
| DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); |
| |
| if (is_dvi) { |
| if (child->common.ddc_pin == 0x05 && port != PORT_B) |
| DRM_DEBUG_KMS("Unexpected DDC pin for port B\n"); |
| if (child->common.ddc_pin == 0x04 && port != PORT_C) |
| DRM_DEBUG_KMS("Unexpected DDC pin for port C\n"); |
| if (child->common.ddc_pin == 0x06 && port != PORT_D) |
| DRM_DEBUG_KMS("Unexpected DDC pin for port D\n"); |
| } |
| |
| if (is_dp) { |
| if (aux_channel == 0x40 && port != PORT_A) |
| DRM_DEBUG_KMS("Unexpected AUX channel for port A\n"); |
| if (aux_channel == 0x10 && port != PORT_B) |
| DRM_DEBUG_KMS("Unexpected AUX channel for port B\n"); |
| if (aux_channel == 0x20 && port != PORT_C) |
| DRM_DEBUG_KMS("Unexpected AUX channel for port C\n"); |
| if (aux_channel == 0x30 && port != PORT_D) |
| DRM_DEBUG_KMS("Unexpected AUX channel for port D\n"); |
| } |
| |
| if (bdb->version >= 158) { |
| /* The VBT HDMI level shift values match the table we have. */ |
| hdmi_level_shift = child->raw[7] & 0xF; |
| if (hdmi_level_shift < 0xC) { |
| DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n", |
| port_name(port), |
| hdmi_level_shift); |
| info->hdmi_level_shift = hdmi_level_shift; |
| } |
| } |
| } |
| |
| static void parse_ddi_ports(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| enum port port; |
| |
| if (!HAS_DDI(dev)) |
| return; |
| |
| if (!dev_priv->vbt.child_dev_num) |
| return; |
| |
| if (bdb->version < 155) |
| return; |
| |
| for (port = PORT_A; port < I915_MAX_PORTS; port++) |
| parse_ddi_port(dev_priv, port, bdb); |
| } |
| |
| static void |
| parse_device_mapping(struct drm_i915_private *dev_priv, |
| struct bdb_header *bdb) |
| { |
| struct bdb_general_definitions *p_defs; |
| union child_device_config *p_child, *child_dev_ptr; |
| int i, child_device_num, count; |
| u16 block_size; |
| |
| p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); |
| if (!p_defs) { |
| DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n"); |
| return; |
| } |
| /* judge whether the size of child device meets the requirements. |
| * If the child device size obtained from general definition block |
| * is different with sizeof(struct child_device_config), skip the |
| * parsing of sdvo device info |
| */ |
| if (p_defs->child_dev_size != sizeof(*p_child)) { |
| /* different child dev size . Ignore it */ |
| DRM_DEBUG_KMS("different child size is found. Invalid.\n"); |
| return; |
| } |
| /* get the block size of general definitions */ |
| block_size = get_blocksize(p_defs); |
| /* get the number of child device */ |
| child_device_num = (block_size - sizeof(*p_defs)) / |
| sizeof(*p_child); |
| count = 0; |
| /* get the number of child device that is present */ |
| for (i = 0; i < child_device_num; i++) { |
| p_child = &(p_defs->devices[i]); |
| if (!p_child->common.device_type) { |
| /* skip the device block if device type is invalid */ |
| continue; |
| } |
| count++; |
| } |
| if (!count) { |
| DRM_DEBUG_KMS("no child dev is parsed from VBT\n"); |
| return; |
| } |
| dev_priv->vbt.child_dev = kcalloc(count, sizeof(*p_child), GFP_KERNEL); |
| if (!dev_priv->vbt.child_dev) { |
| DRM_DEBUG_KMS("No memory space for child device\n"); |
| return; |
| } |
| |
| dev_priv->vbt.child_dev_num = count; |
| count = 0; |
| for (i = 0; i < child_device_num; i++) { |
| p_child = &(p_defs->devices[i]); |
| if (!p_child->common.device_type) { |
| /* skip the device block if device type is invalid */ |
| continue; |
| } |
| child_dev_ptr = dev_priv->vbt.child_dev + count; |
| count++; |
| memcpy((void *)child_dev_ptr, (void *)p_child, |
| sizeof(*p_child)); |
| } |
| return; |
| } |
| |
| static void |
| init_vbt_defaults(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| enum port port; |
| |
| dev_priv->vbt.crt_ddc_pin = GMBUS_PORT_VGADDC; |
| |
| /* LFP panel data */ |
| dev_priv->vbt.lvds_dither = 1; |
| dev_priv->vbt.lvds_vbt = 0; |
| |
| /* SDVO panel data */ |
| dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; |
| |
| /* general features */ |
| dev_priv->vbt.int_tv_support = 1; |
| dev_priv->vbt.int_crt_support = 1; |
| |
| /* Default to using SSC */ |
| dev_priv->vbt.lvds_use_ssc = 1; |
| /* |
| * Core/SandyBridge/IvyBridge use alternative (120MHz) reference |
| * clock for LVDS. |
| */ |
| dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev, |
| !HAS_PCH_SPLIT(dev)); |
| DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq); |
| |
| for (port = PORT_A; port < I915_MAX_PORTS; port++) { |
| struct ddi_vbt_port_info *info = |
| &dev_priv->vbt.ddi_port_info[port]; |
| |
| /* Recommended BSpec default: 800mV 0dB. */ |
| info->hdmi_level_shift = 6; |
| |
| info->supports_dvi = (port != PORT_A && port != PORT_E); |
| info->supports_hdmi = info->supports_dvi; |
| info->supports_dp = (port != PORT_E); |
| } |
| } |
| |
| static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id) |
| { |
| DRM_DEBUG_KMS("Falling back to manually reading VBT from " |
| "VBIOS ROM for %s\n", |
| id->ident); |
| return 1; |
| } |
| |
| static const struct dmi_system_id intel_no_opregion_vbt[] = { |
| { |
| .callback = intel_no_opregion_vbt_callback, |
| .ident = "ThinkCentre A57", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"), |
| }, |
| }, |
| { } |
| }; |
| |
| /** |
| * intel_parse_bios - find VBT and initialize settings from the BIOS |
| * @dev: DRM device |
| * |
| * Loads the Video BIOS and checks that the VBT exists. Sets scratch registers |
| * to appropriate values. |
| * |
| * Returns 0 on success, nonzero on failure. |
| */ |
| int |
| intel_parse_bios(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct pci_dev *pdev = dev->pdev; |
| struct bdb_header *bdb = NULL; |
| u8 __iomem *bios = NULL; |
| |
| if (HAS_PCH_NOP(dev)) |
| return -ENODEV; |
| |
| init_vbt_defaults(dev_priv); |
| |
| /* XXX Should this validation be moved to intel_opregion.c? */ |
| if (!dmi_check_system(intel_no_opregion_vbt) && dev_priv->opregion.vbt) { |
| struct vbt_header *vbt = dev_priv->opregion.vbt; |
| if (memcmp(vbt->signature, "$VBT", 4) == 0) { |
| DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n", |
| vbt->signature); |
| bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset); |
| } else |
| dev_priv->opregion.vbt = NULL; |
| } |
| |
| if (bdb == NULL) { |
| struct vbt_header *vbt = NULL; |
| size_t size; |
| int i; |
| |
| bios = pci_map_rom(pdev, &size); |
| if (!bios) |
| return -1; |
| |
| /* Scour memory looking for the VBT signature */ |
| for (i = 0; i + 4 < size; i++) { |
| if (!memcmp(bios + i, "$VBT", 4)) { |
| vbt = (struct vbt_header *)(bios + i); |
| break; |
| } |
| } |
| |
| if (!vbt) { |
| DRM_DEBUG_DRIVER("VBT signature missing\n"); |
| pci_unmap_rom(pdev, bios); |
| return -1; |
| } |
| |
| bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset); |
| } |
| |
| /* Grab useful general definitions */ |
| parse_general_features(dev_priv, bdb); |
| parse_general_definitions(dev_priv, bdb); |
| parse_lfp_panel_data(dev_priv, bdb); |
| parse_lfp_backlight(dev_priv, bdb); |
| parse_sdvo_panel_data(dev_priv, bdb); |
| parse_sdvo_device_mapping(dev_priv, bdb); |
| parse_device_mapping(dev_priv, bdb); |
| parse_driver_features(dev_priv, bdb); |
| parse_edp(dev_priv, bdb); |
| parse_mipi(dev_priv, bdb); |
| parse_ddi_ports(dev_priv, bdb); |
| |
| if (bios) |
| pci_unmap_rom(pdev, bios); |
| |
| return 0; |
| } |
| |
| /* Ensure that vital registers have been initialised, even if the BIOS |
| * is absent or just failing to do its job. |
| */ |
| void intel_setup_bios(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* Set the Panel Power On/Off timings if uninitialized. */ |
| if (!HAS_PCH_SPLIT(dev) && |
| I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) { |
| /* Set T2 to 40ms and T5 to 200ms */ |
| I915_WRITE(PP_ON_DELAYS, 0x019007d0); |
| |
| /* Set T3 to 35ms and Tx to 200ms */ |
| I915_WRITE(PP_OFF_DELAYS, 0x015e07d0); |
| } |
| } |