[ALSA] document - Add PM support
Modules: Documentation
Mark the drivers newly supporting PM in the documentation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 84068ba..9a58ed9 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -148,6 +148,8 @@
Module supports up to 8 cards. This module does not support autoprobe
thus main port must be specified!!! Other ports are optional.
+ The power-management is supported.
+
Module snd-ad1889
-----------------
@@ -186,6 +188,8 @@
Module supports up to 8 cards, autoprobe and PnP.
+ The power-management is supported.
+
Module snd-als4000
------------------
@@ -196,6 +200,8 @@
Module supports up to 8 cards, autoprobe and PnP.
+ The power-management is supported.
+
Module snd-atiixp
-----------------
@@ -213,6 +219,8 @@
implementation depends on the motherboard, and you'll need to
choose the correct one via spdif_aclink module option.
+ The power-management is supported.
+
Module snd-atiixp-modem
-----------------------
@@ -223,6 +231,8 @@
Note: The default index value of this module is -2, i.e. the first
slot is excluded.
+ The power-management is supported.
+
Module snd-au8810, snd-au8820, snd-au8830
-----------------------------------------
@@ -265,6 +275,8 @@
Module supports up to 8 cards, PnP and autoprobe.
+ The power-management is supported.
+
Module snd-azt3328
------------------
@@ -310,6 +322,8 @@
Module supports up to 8 cards and autoprobe.
+ The power-management is supported.
+
Module snd-cmipci
-----------------
@@ -323,6 +337,8 @@
Module supports autoprobe and multiple chips (max 8).
+ The power-management is supported.
+
Module snd-cs4231
-----------------
@@ -433,6 +449,8 @@
Module supports up to 8 cards. This module is enabled only with
ISA PnP support.
+ The power-management is supported.
+
Module snd-dummy
----------------
@@ -440,6 +458,8 @@
or input, but you may use this module for any application which
requires a sound card (like RealPlayer).
+ The power-management is supported.
+
Module snd-emu10k1
------------------
@@ -473,6 +493,8 @@
* Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
* Creative Card all ins and outs [0x3fff/0x7fff]
+ The power-management is supported.
+
Module snd-emu10k1x
-------------------
@@ -515,6 +537,8 @@
Module supports up to 8 cards, PnP and autoprobe.
+ The power-management is supported.
+
Module snd-es1688
-----------------
@@ -554,6 +578,8 @@
Module supports up to 8 cards and autoprobe.
+ The power-management is supported.
+
Module snd-es1968
-----------------
@@ -586,6 +612,8 @@
Module supports up to 8 cards and autoprobe.
+ The power-management is supported.
+
Module snd-gusclassic
---------------------
@@ -695,6 +723,8 @@
(Usually SD_LPLIB register is more accurate than the
position buffer.)
+ The power-management is supported.
+
Module snd-hdsp
---------------
@@ -846,6 +876,8 @@
Note: The default index value of this module is -2, i.e. the first
slot is excluded.
+ The power-management is supported.
+
Module snd-interwave
--------------------
@@ -1091,6 +1123,8 @@
For ARM architecture only.
+ The power-management is supported.
+
Module snd-rme32
----------------
@@ -1131,6 +1165,8 @@
Module supports only one card.
Module has no enable and index options.
+ The power-management is supported.
+
Module snd-sb8
--------------
@@ -1144,6 +1180,8 @@
Module supports up to 8 cards and autoprobe.
+ The power-management is supported.
+
Module snd-sb16 and snd-sbawe
-----------------------------
@@ -1170,6 +1208,8 @@
half duplex mode through 8-bit DMA channel by disabling their
16-bit DMA channel.
+ The power-management is supported.
+
Module snd-sgalaxy
------------------
@@ -1182,6 +1222,8 @@
Module supports up to 8 cards.
+ The power-management is supported.
+
Module snd-sscape
-----------------
@@ -1363,6 +1405,8 @@
Note: for the MPU401 on VIA823x, use snd-mpu401 driver
additionally. The mpu_port option is for VIA686 chips only.
+ The power-management is supported.
+
Module snd-via82xx-modem
------------------------
@@ -1375,6 +1419,8 @@
Note: The default index value of this module is -2, i.e. the first
slot is excluded.
+ The power-management is supported.
+
Module snd-virmidi
------------------
@@ -1413,6 +1459,8 @@
size is chosen. The possible IBL values can be found in
/proc/asound/cardX/vx-status proc file.
+ The power-management is supported.
+
Module snd-vxpocket
-------------------
@@ -1441,6 +1489,8 @@
Note2: snd-vxp440 driver is merged to snd-vxpocket driver since
ALSA 1.0.10.
+ The power-management is supported.
+
Module snd-ymfpci
-----------------
@@ -1465,6 +1515,8 @@
Note: the driver is build only when CONFIG_ISA is set.
+ The power-management is supported.
+
AC97 Quirk Option
=================
