diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 6761a7b..7f43b04 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -149,6 +149,11 @@
 MAINTAINERS file for a mailing list that relates specifically to
 your change.
 
+If changes affect userland-kernel interfaces, please send
+the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
+a man-pages patch, or at least a notification of the change,
+so that some information makes its way into the manual pages.
+
 Even if the maintainer did not respond in step #4, make sure to ALWAYS
 copy the maintainer when you change their code.
 
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index b974cf5..96bea27 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -104,6 +104,7 @@
 logo_*_clut224.c
 logo_*_mono.c
 lxdialog
+mach-types
 mach-types.h
 make_times_h
 map
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
index 814e2f5..62db675 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.txt
@@ -144,7 +144,21 @@
 	This is the default.
 pmipal	Use the protected mode interface for palette changes.
 
-mtrr	setup memory type range registers for the vesafb framebuffer.
+mtrr:n	setup memory type range registers for the vesafb framebuffer
+	where n:
+	      0 - disabled (equivalent to nomtrr)
+	      1 - uncachable
+	      2 - write-back
+	      3 - write-combining (default)
+	      4 - write-through
+
+	If you see the following in dmesg, choose the type that matches the
+	old one. In this example, use "mtrr:2".
+...
+mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
+...
+
+nomtrr  disable mtrr
 
 vremap:n
         remap 'n' MiB of video RAM. If 0 or not specified, remap memory
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
new file mode 100644
index 0000000..0541fe1
--- /dev/null
+++ b/Documentation/kprobes.txt
@@ -0,0 +1,588 @@
+Title	: Kernel Probes (Kprobes)
+Authors	: Jim Keniston <jkenisto@us.ibm.com>
+	: Prasanna S Panchamukhi <prasanna@in.ibm.com>
+
+CONTENTS
+
+1. Concepts: Kprobes, Jprobes, Return Probes
+2. Architectures Supported
+3. Configuring Kprobes
+4. API Reference
+5. Kprobes Features and Limitations
+6. Probe Overhead
+7. TODO
+8. Kprobes Example
+9. Jprobes Example
+10. Kretprobes Example
+
+1. Concepts: Kprobes, Jprobes, Return Probes
+
+Kprobes enables you to dynamically break into any kernel routine and
+collect debugging and performance information non-disruptively. You
+can trap at almost any kernel code address, specifying a handler
+routine to be invoked when the breakpoint is hit.
+
+There are currently three types of probes: kprobes, jprobes, and
+kretprobes (also called return probes).  A kprobe can be inserted
+on virtually any instruction in the kernel.  A jprobe is inserted at
+the entry to a kernel function, and provides convenient access to the
+function's arguments.  A return probe fires when a specified function
+returns.
+
+In the typical case, Kprobes-based instrumentation is packaged as
+a kernel module.  The module's init function installs ("registers")
+one or more probes, and the exit function unregisters them.  A
+registration function such as register_kprobe() specifies where
+the probe is to be inserted and what handler is to be called when
+the probe is hit.
+
+The next three subsections explain how the different types of
+probes work.  They explain certain things that you'll need to
+know in order to make the best use of Kprobes -- e.g., the
+difference between a pre_handler and a post_handler, and how
+to use the maxactive and nmissed fields of a kretprobe.  But
+if you're in a hurry to start using Kprobes, you can skip ahead
+to section 2.
+
+1.1 How Does a Kprobe Work?
+
+When a kprobe is registered, Kprobes makes a copy of the probed
+instruction and replaces the first byte(s) of the probed instruction
+with a breakpoint instruction (e.g., int3 on i386 and x86_64).
+
+When a CPU hits the breakpoint instruction, a trap occurs, the CPU's
+registers are saved, and control passes to Kprobes via the
+notifier_call_chain mechanism.  Kprobes executes the "pre_handler"
+associated with the kprobe, passing the handler the addresses of the
+kprobe struct and the saved registers.
+
+Next, Kprobes single-steps its copy of the probed instruction.
+(It would be simpler to single-step the actual instruction in place,
+but then Kprobes would have to temporarily remove the breakpoint
+instruction.  This would open a small time window when another CPU
+could sail right past the probepoint.)
+
+After the instruction is single-stepped, Kprobes executes the
+"post_handler," if any, that is associated with the kprobe.
+Execution then continues with the instruction following the probepoint.
+
+1.2 How Does a Jprobe Work?
+
+A jprobe is implemented using a kprobe that is placed on a function's
+entry point.  It employs a simple mirroring principle to allow
+seamless access to the probed function's arguments.  The jprobe
+handler routine should have the same signature (arg list and return
+type) as the function being probed, and must always end by calling
+the Kprobes function jprobe_return().
+
+Here's how it works.  When the probe is hit, Kprobes makes a copy of
+the saved registers and a generous portion of the stack (see below).
+Kprobes then points the saved instruction pointer at the jprobe's
+handler routine, and returns from the trap.  As a result, control
+passes to the handler, which is presented with the same register and
+stack contents as the probed function.  When it is done, the handler
+calls jprobe_return(), which traps again to restore the original stack
+contents and processor state and switch to the probed function.
+
+By convention, the callee owns its arguments, so gcc may produce code
+that unexpectedly modifies that portion of the stack.  This is why
+Kprobes saves a copy of the stack and restores it after the jprobe
+handler has run.  Up to MAX_STACK_SIZE bytes are copied -- e.g.,
+64 bytes on i386.
+
+Note that the probed function's args may be passed on the stack
+or in registers (e.g., for x86_64 or for an i386 fastcall function).
+The jprobe will work in either case, so long as the handler's
+prototype matches that of the probed function.
+
+1.3 How Does a Return Probe Work?
+
+When you call register_kretprobe(), Kprobes establishes a kprobe at
+the entry to the function.  When the probed function is called and this
+probe is hit, Kprobes saves a copy of the return address, and replaces
+the return address with the address of a "trampoline."  The trampoline
+is an arbitrary piece of code -- typically just a nop instruction.
+At boot time, Kprobes registers a kprobe at the trampoline.
+
+When the probed function executes its return instruction, control
+passes to the trampoline and that probe is hit.  Kprobes' trampoline
+handler calls the user-specified handler associated with the kretprobe,
+then sets the saved instruction pointer to the saved return address,
+and that's where execution resumes upon return from the trap.
+
+While the probed function is executing, its return address is
+stored in an object of type kretprobe_instance.  Before calling
+register_kretprobe(), the user sets the maxactive field of the
+kretprobe struct to specify how many instances of the specified
+function can be probed simultaneously.  register_kretprobe()
+pre-allocates the indicated number of kretprobe_instance objects.
+
+For example, if the function is non-recursive and is called with a
+spinlock held, maxactive = 1 should be enough.  If the function is
+non-recursive and can never relinquish the CPU (e.g., via a semaphore
+or preemption), NR_CPUS should be enough.  If maxactive <= 0, it is
+set to a default value.  If CONFIG_PREEMPT is enabled, the default
+is max(10, 2*NR_CPUS).  Otherwise, the default is NR_CPUS.
+
+It's not a disaster if you set maxactive too low; you'll just miss
+some probes.  In the kretprobe struct, the nmissed field is set to
+zero when the return probe is registered, and is incremented every
+time the probed function is entered but there is no kretprobe_instance
+object available for establishing the return probe.
+
+2. Architectures Supported
+
+Kprobes, jprobes, and return probes are implemented on the following
+architectures:
+
+- i386
+- x86_64 (AMD-64, E64MT)
+- ppc64
+- ia64 (Support for probes on certain instruction types is still in progress.)
+- sparc64 (Return probes not yet implemented.)
+
+3. Configuring Kprobes
+
+When configuring the kernel using make menuconfig/xconfig/oldconfig,
+ensure that CONFIG_KPROBES is set to "y".  Under "Kernel hacking",
+look for "Kprobes".  You may have to enable "Kernel debugging"
+(CONFIG_DEBUG_KERNEL) before you can enable Kprobes.
+
+You may also want to ensure that CONFIG_KALLSYMS and perhaps even
+CONFIG_KALLSYMS_ALL are set to "y", since kallsyms_lookup_name()
+is a handy, version-independent way to find a function's address.
+
+If you need to insert a probe in the middle of a function, you may find
+it useful to "Compile the kernel with debug info" (CONFIG_DEBUG_INFO),
+so you can use "objdump -d -l vmlinux" to see the source-to-object
+code mapping.
+
+4. API Reference
+
+The Kprobes API includes a "register" function and an "unregister"
+function for each type of probe.  Here are terse, mini-man-page
+specifications for these functions and the associated probe handlers
+that you'll write.  See the latter half of this document for examples.
+
+4.1 register_kprobe
+
+#include <linux/kprobes.h>
+int register_kprobe(struct kprobe *kp);
+
+Sets a breakpoint at the address kp->addr.  When the breakpoint is
+hit, Kprobes calls kp->pre_handler.  After the probed instruction
+is single-stepped, Kprobe calls kp->post_handler.  If a fault
+occurs during execution of kp->pre_handler or kp->post_handler,
+or during single-stepping of the probed instruction, Kprobes calls
+kp->fault_handler.  Any or all handlers can be NULL.
+
+register_kprobe() returns 0 on success, or a negative errno otherwise.
+
+User's pre-handler (kp->pre_handler):
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+int pre_handler(struct kprobe *p, struct pt_regs *regs);
+
+Called with p pointing to the kprobe associated with the breakpoint,
+and regs pointing to the struct containing the registers saved when
+the breakpoint was hit.  Return 0 here unless you're a Kprobes geek.
+
+User's post-handler (kp->post_handler):
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+void post_handler(struct kprobe *p, struct pt_regs *regs,
+	unsigned long flags);
+
+p and regs are as described for the pre_handler.  flags always seems
+to be zero.
+
+User's fault-handler (kp->fault_handler):
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+int fault_handler(struct kprobe *p, struct pt_regs *regs, int trapnr);
+
+p and regs are as described for the pre_handler.  trapnr is the
+architecture-specific trap number associated with the fault (e.g.,
+on i386, 13 for a general protection fault or 14 for a page fault).
+Returns 1 if it successfully handled the exception.
+
+4.2 register_jprobe
+
+#include <linux/kprobes.h>
+int register_jprobe(struct jprobe *jp)
+
+Sets a breakpoint at the address jp->kp.addr, which must be the address
+of the first instruction of a function.  When the breakpoint is hit,
+Kprobes runs the handler whose address is jp->entry.
+
+The handler should have the same arg list and return type as the probed
+function; and just before it returns, it must call jprobe_return().
+(The handler never actually returns, since jprobe_return() returns
+control to Kprobes.)  If the probed function is declared asmlinkage,
+fastcall, or anything else that affects how args are passed, the
+handler's declaration must match.
+
+register_jprobe() returns 0 on success, or a negative errno otherwise.
+
+4.3 register_kretprobe
+
+#include <linux/kprobes.h>
+int register_kretprobe(struct kretprobe *rp);
+
+Establishes a return probe for the function whose address is
+rp->kp.addr.  When that function returns, Kprobes calls rp->handler.
+You must set rp->maxactive appropriately before you call
+register_kretprobe(); see "How Does a Return Probe Work?" for details.
+
+register_kretprobe() returns 0 on success, or a negative errno
+otherwise.
+
+User's return-probe handler (rp->handler):
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+int kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs);
+
+regs is as described for kprobe.pre_handler.  ri points to the
+kretprobe_instance object, of which the following fields may be
+of interest:
+- ret_addr: the return address
+- rp: points to the corresponding kretprobe object
+- task: points to the corresponding task struct
+The handler's return value is currently ignored.
+
+4.4 unregister_*probe
+
+#include <linux/kprobes.h>
+void unregister_kprobe(struct kprobe *kp);
+void unregister_jprobe(struct jprobe *jp);
+void unregister_kretprobe(struct kretprobe *rp);
+
+Removes the specified probe.  The unregister function can be called
+at any time after the probe has been registered.
+
+5. Kprobes Features and Limitations
+
+As of Linux v2.6.12, Kprobes allows multiple probes at the same
+address.  Currently, however, there cannot be multiple jprobes on
+the same function at the same time.
+
+In general, you can install a probe anywhere in the kernel.
+In particular, you can probe interrupt handlers.  Known exceptions
+are discussed in this section.
+
+For obvious reasons, it's a bad idea to install a probe in
+the code that implements Kprobes (mostly kernel/kprobes.c and
+arch/*/kernel/kprobes.c).  A patch in the v2.6.13 timeframe instructs
+Kprobes to reject such requests.
+
+If you install a probe in an inline-able function, Kprobes makes
+no attempt to chase down all inline instances of the function and
+install probes there.  gcc may inline a function without being asked,
+so keep this in mind if you're not seeing the probe hits you expect.
+
+A probe handler can modify the environment of the probed function
+-- e.g., by modifying kernel data structures, or by modifying the
+contents of the pt_regs struct (which are restored to the registers
+upon return from the breakpoint).  So Kprobes can be used, for example,
+to install a bug fix or to inject faults for testing.  Kprobes, of
+course, has no way to distinguish the deliberately injected faults
+from the accidental ones.  Don't drink and probe.
+
+Kprobes makes no attempt to prevent probe handlers from stepping on
+each other -- e.g., probing printk() and then calling printk() from a
+probe handler.  As of Linux v2.6.12, if a probe handler hits a probe,
+that second probe's handlers won't be run in that instance.
+
+In Linux v2.6.12 and previous versions, Kprobes' data structures are
+protected by a single lock that is held during probe registration and
+unregistration and while handlers are run.  Thus, no two handlers
+can run simultaneously.  To improve scalability on SMP systems,
+this restriction will probably be removed soon, in which case
+multiple handlers (or multiple instances of the same handler) may
+run concurrently on different CPUs.  Code your handlers accordingly.
+
+Kprobes does not use semaphores or allocate memory except during
+registration and unregistration.
+
+Probe handlers are run with preemption disabled.  Depending on the
+architecture, handlers may also run with interrupts disabled.  In any
+case, your handler should not yield the CPU (e.g., by attempting to
+acquire a semaphore).
+
+Since a return probe is implemented by replacing the return
+address with the trampoline's address, stack backtraces and calls
+to __builtin_return_address() will typically yield the trampoline's
+address instead of the real return address for kretprobed functions.
+(As far as we can tell, __builtin_return_address() is used only
+for instrumentation and error reporting.)
+
+If the number of times a function is called does not match the
+number of times it returns, registering a return probe on that
+function may produce undesirable results.  We have the do_exit()
+and do_execve() cases covered.  do_fork() is not an issue.  We're
+unaware of other specific cases where this could be a problem.
+
+6. Probe Overhead
+
+On a typical CPU in use in 2005, a kprobe hit takes 0.5 to 1.0
+microseconds to process.  Specifically, a benchmark that hits the same
+probepoint repeatedly, firing a simple handler each time, reports 1-2
+million hits per second, depending on the architecture.  A jprobe or
+return-probe hit typically takes 50-75% longer than a kprobe hit.
+When you have a return probe set on a function, adding a kprobe at
+the entry to that function adds essentially no overhead.
+
+Here are sample overhead figures (in usec) for different architectures.
+k = kprobe; j = jprobe; r = return probe; kr = kprobe + return probe
+on same function; jr = jprobe + return probe on same function
+
+i386: Intel Pentium M, 1495 MHz, 2957.31 bogomips
+k = 0.57 usec; j = 1.00; r = 0.92; kr = 0.99; jr = 1.40
+
+x86_64: AMD Opteron 246, 1994 MHz, 3971.48 bogomips
+k = 0.49 usec; j = 0.76; r = 0.80; kr = 0.82; jr = 1.07
+
+ppc64: POWER5 (gr), 1656 MHz (SMT disabled, 1 virtual CPU per physical CPU)
+k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99
+
+7. TODO
+
+a. SystemTap (http://sourceware.org/systemtap): Work in progress
+to provide a simplified programming interface for probe-based
+instrumentation.
+b. Improved SMP scalability: Currently, work is in progress to handle
+multiple kprobes in parallel.
+c. Kernel return probes for sparc64.
+d. Support for other architectures.
+e. User-space probes.
+
+8. Kprobes Example
+
+Here's a sample kernel module showing the use of kprobes to dump a
+stack trace and selected i386 registers when do_fork() is called.
+----- cut here -----
+/*kprobe_example.c*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/kallsyms.h>
+#include <linux/sched.h>
+
+/*For each probe you need to allocate a kprobe structure*/
+static struct kprobe kp;
+
+/*kprobe pre_handler: called just before the probed instruction is executed*/
+int handler_pre(struct kprobe *p, struct pt_regs *regs)
+{
+	printk("pre_handler: p->addr=0x%p, eip=%lx, eflags=0x%lx\n",
+		p->addr, regs->eip, regs->eflags);
+	dump_stack();
+	return 0;
+}
+
+/*kprobe post_handler: called after the probed instruction is executed*/
+void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags)
+{
+	printk("post_handler: p->addr=0x%p, eflags=0x%lx\n",
+		p->addr, regs->eflags);
+}
+
+/* fault_handler: this is called if an exception is generated for any
+ * instruction within the pre- or post-handler, or when Kprobes
+ * single-steps the probed instruction.
+ */
+int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
+{
+	printk("fault_handler: p->addr=0x%p, trap #%dn",
+		p->addr, trapnr);
+	/* Return 0 because we don't handle the fault. */
+	return 0;
+}
+
+int init_module(void)
+{
+	int ret;
+	kp.pre_handler = handler_pre;
+	kp.post_handler = handler_post;
+	kp.fault_handler = handler_fault;
+	kp.addr = (kprobe_opcode_t*) kallsyms_lookup_name("do_fork");
+	/* register the kprobe now */
+	if (!kp.addr) {
+		printk("Couldn't find %s to plant kprobe\n", "do_fork");
+		return -1;
+	}
+	if ((ret = register_kprobe(&kp) < 0)) {
+		printk("register_kprobe failed, returned %d\n", ret);
+		return -1;
+	}
+	printk("kprobe registered\n");
+	return 0;
+}
+
+void cleanup_module(void)
+{
+	unregister_kprobe(&kp);
+	printk("kprobe unregistered\n");
+}
+
+MODULE_LICENSE("GPL");
+----- cut here -----
+
+You can build the kernel module, kprobe-example.ko, using the following
+Makefile:
+----- cut here -----
+obj-m := kprobe-example.o
+KDIR := /lib/modules/$(shell uname -r)/build
+PWD := $(shell pwd)
+default:
+	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
+clean:
+	rm -f *.mod.c *.ko *.o
+----- cut here -----
+
+$ make
+$ su -
+...
+# insmod kprobe-example.ko
+
+You will see the trace data in /var/log/messages and on the console
+whenever do_fork() is invoked to create a new process.
+
+9. Jprobes Example
+
+Here's a sample kernel module showing the use of jprobes to dump
+the arguments of do_fork().
+----- cut here -----
+/*jprobe-example.c */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uio.h>
+#include <linux/kprobes.h>
+#include <linux/kallsyms.h>
+
+/*
+ * Jumper probe for do_fork.
+ * Mirror principle enables access to arguments of the probed routine
+ * from the probe handler.
+ */
+
+/* Proxy routine having the same arguments as actual do_fork() routine */
+long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
+	      struct pt_regs *regs, unsigned long stack_size,
+	      int __user * parent_tidptr, int __user * child_tidptr)
+{
+	printk("jprobe: clone_flags=0x%lx, stack_size=0x%lx, regs=0x%p\n",
+	       clone_flags, stack_size, regs);
+	/* Always end with a call to jprobe_return(). */
+	jprobe_return();
+	/*NOTREACHED*/
+	return 0;
+}
+
+static struct jprobe my_jprobe = {
+	.entry = (kprobe_opcode_t *) jdo_fork
+};
+
+int init_module(void)
+{
+	int ret;
+	my_jprobe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("do_fork");
+	if (!my_jprobe.kp.addr) {
+		printk("Couldn't find %s to plant jprobe\n", "do_fork");
+		return -1;
+	}
+
+	if ((ret = register_jprobe(&my_jprobe)) <0) {
+		printk("register_jprobe failed, returned %d\n", ret);
+		return -1;
+	}
+	printk("Planted jprobe at %p, handler addr %p\n",
+	       my_jprobe.kp.addr, my_jprobe.entry);
+	return 0;
+}
+
+void cleanup_module(void)
+{
+	unregister_jprobe(&my_jprobe);
+	printk("jprobe unregistered\n");
+}
+
+MODULE_LICENSE("GPL");
+----- cut here -----
+
+Build and insert the kernel module as shown in the above kprobe
+example.  You will see the trace data in /var/log/messages and on
+the console whenever do_fork() is invoked to create a new process.
+(Some messages may be suppressed if syslogd is configured to
+eliminate duplicate messages.)
+
+10. Kretprobes Example
+
+Here's a sample kernel module showing the use of return probes to
+report failed calls to sys_open().
+----- cut here -----
+/*kretprobe-example.c*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/kallsyms.h>
+
+static const char *probed_func = "sys_open";
+
+/* Return-probe handler: If the probed function fails, log the return value. */
+static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+	// Substitute the appropriate register name for your architecture --
+	// e.g., regs->rax for x86_64, regs->gpr[3] for ppc64.
+	int retval = (int) regs->eax;
+	if (retval < 0) {
+		printk("%s returns %d\n", probed_func, retval);
+	}
+	return 0;
+}
+
+static struct kretprobe my_kretprobe = {
+	.handler = ret_handler,
+	/* Probe up to 20 instances concurrently. */
+	.maxactive = 20
+};
+
+int init_module(void)
+{
+	int ret;
+	my_kretprobe.kp.addr =
+		(kprobe_opcode_t *) kallsyms_lookup_name(probed_func);
+	if (!my_kretprobe.kp.addr) {
+		printk("Couldn't find %s to plant return probe\n", probed_func);
+		return -1;
+	}
+	if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
+		printk("register_kretprobe failed, returned %d\n", ret);
+		return -1;
+	}
+	printk("Planted return probe at %p\n", my_kretprobe.kp.addr);
+	return 0;
+}
+
+void cleanup_module(void)
+{
+	unregister_kretprobe(&my_kretprobe);
+	printk("kretprobe unregistered\n");
+	/* nmissed > 0 suggests that maxactive was set too low. */
+	printk("Missed probing %d instances of %s\n",
+		my_kretprobe.nmissed, probed_func);
+}
+
+MODULE_LICENSE("GPL");
+----- cut here -----
+
+Build and insert the kernel module as shown in the above kprobe
+example.  You will see the trace data in /var/log/messages and on the
+console whenever sys_open() returns a negative value.  (Some messages
+may be suppressed if syslogd is configured to eliminate duplicate
+messages.)
+
+For additional information on Kprobes, refer to the following URLs:
+http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
+http://www.redhat.com/magazine/005mar05/features/kprobes/
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 0bc2ed1..24d0294 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,5 +1,7 @@
 
-                   Linux Ethernet Bonding Driver HOWTO
+		Linux Ethernet Bonding Driver HOWTO
+
+		Latest update: 21 June 2005
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -11,15 +13,22 @@
 
 Reorganized and updated Feb 2005 by Jay Vosburgh
 
-Note :
-------
-	
-The bonding driver originally came from Donald Becker's beowulf patches for
-kernel 2.0. It has changed quite a bit since, and the original tools from
-extreme-linux and beowulf sites will not work with this version of the driver.
+Introduction
+============
 
-For new versions of the driver, patches for older kernels and the updated
-userspace tools, please follow the links at the end of this file.
+	The Linux bonding driver provides a method for aggregating
+multiple network interfaces into a single logical "bonded" interface.
+The behavior of the bonded interfaces depends upon the mode; generally
+speaking, modes provide either hot standby or load balancing services.
+Additionally, link integrity monitoring may be performed.
+	
+	The bonding driver originally came from Donald Becker's
+beowulf patches for kernel 2.0. It has changed quite a bit since, and
+the original tools from extreme-linux and beowulf sites will not work
+with this version of the driver.
+
+	For new versions of the driver, updated userspace tools, and
+who to ask for help, please follow the links at the end of this file.
 
 Table of Contents
 =================
@@ -30,9 +39,13 @@
 
 3. Configuring Bonding Devices
 3.1	Configuration with sysconfig support
+3.1.1		Using DHCP with sysconfig
+3.1.2		Configuring Multiple Bonds with sysconfig
 3.2	Configuration with initscripts support
+3.2.1		Using DHCP with initscripts
+3.2.2		Configuring Multiple Bonds with initscripts
 3.3	Configuring Bonding Manually
-3.4	Configuring Multiple Bonds
+3.3.1		Configuring Multiple Bonds Manually
 
 5. Querying Bonding Configuration
 5.1	Bonding Configuration
@@ -56,21 +69,30 @@
 
 11. Promiscuous mode
 
-12. High Availability Information
+12. Configuring Bonding for High Availability
 12.1	High Availability in a Single Switch Topology
-12.1.1		Bonding Mode Selection for Single Switch Topology
-12.1.2		Link Monitoring for Single Switch Topology
 12.2	High Availability in a Multiple Switch Topology
-12.2.1		Bonding Mode Selection for Multiple Switch Topology
-12.2.2		Link Monitoring for Multiple Switch Topology
-12.3	Switch Behavior Issues for High Availability
+12.2.1		HA Bonding Mode Selection for Multiple Switch Topology
+12.2.2		HA Link Monitoring for Multiple Switch Topology
 
-13. Hardware Specific Considerations
-13.1	IBM BladeCenter
+13. Configuring Bonding for Maximum Throughput
+13.1	Maximum Throughput in a Single Switch Topology
+13.1.1		MT Bonding Mode Selection for Single Switch Topology
+13.1.2		MT Link Monitoring for Single Switch Topology
+13.2	Maximum Throughput in a Multiple Switch Topology
+13.2.1		MT Bonding Mode Selection for Multiple Switch Topology
+13.2.2		MT Link Monitoring for Multiple Switch Topology
 
-14. Frequently Asked Questions
+14. Switch Behavior Issues
+14.1	Link Establishment and Failover Delays
+14.2	Duplicated Incoming Packets
 
-15. Resources and Links
+15. Hardware Specific Considerations
+15.1	IBM BladeCenter
+
+16. Frequently Asked Questions
+
+17. Resources and Links
 
 
 1. Bonding Driver Installation
@@ -86,16 +108,10 @@
 1.1 Configure and build the kernel with bonding
 -----------------------------------------------
 
-	The latest version of the bonding driver is available in the
+	The current version of the bonding driver is available in the
 drivers/net/bonding subdirectory of the most recent kernel source
-(which is available on http://kernel.org).
-
-	Prior to the 2.4.11 kernel, the bonding driver was maintained
-largely outside the kernel tree; patches for some earlier kernels are
-available on the bonding sourceforge site, although those patches are
-still several years out of date.  Most users will want to use either
-the most recent kernel from kernel.org or whatever kernel came with
-their distro.
+(which is available on http://kernel.org).  Most users "rolling their
+own" will want to use the most recent kernel from kernel.org.
 
 	Configure kernel with "make menuconfig" (or "make xconfig" or
 "make config"), then select "Bonding driver support" in the "Network
@@ -103,8 +119,8 @@
 driver as module since it is currently the only way to pass parameters
 to the driver or configure more than one bonding device.
 
-	Build and install the new kernel and modules, then proceed to
-step 2.
+	Build and install the new kernel and modules, then continue
+below to install ifenslave.
 
 1.2 Install ifenslave Control Utility
 -------------------------------------
@@ -147,9 +163,9 @@
 	Options for the bonding driver are supplied as parameters to
 the bonding module at load time.  They may be given as command line
 arguments to the insmod or modprobe command, but are usually specified
-in either the /etc/modprobe.conf configuration file, or in a
-distro-specific configuration file (some of which are detailed in the
-next section).
+in either the /etc/modules.conf or /etc/modprobe.conf configuration
+file, or in a distro-specific configuration file (some of which are
+detailed in the next section).
 
 	The available bonding driver parameters are listed below. If a
 parameter is not specified the default value is used.  When initially
@@ -162,34 +178,34 @@
 support at least miimon, so there is really no reason not to use it.
 
 	Options with textual values will accept either the text name
-	or, for backwards compatibility, the option value.  E.g.,
-	"mode=802.3ad" and "mode=4" set the same mode.
+or, for backwards compatibility, the option value.  E.g.,
+"mode=802.3ad" and "mode=4" set the same mode.
 
 	The parameters are as follows:
 
 arp_interval
 
-	Specifies the ARP monitoring frequency in milli-seconds. If
-	ARP monitoring is used in a load-balancing mode (mode 0 or 2),
-	the switch should be configured in a mode that evenly
-	distributes packets across all links - such as round-robin. If
-	the switch is configured to distribute the packets in an XOR
+	Specifies the ARP link monitoring frequency in milliseconds.
+	If ARP monitoring is used in an etherchannel compatible mode
+	(modes 0 and 2), the switch should be configured in a mode
+	that evenly distributes packets across all links. If the
+	switch is configured to distribute the packets in an XOR
 	fashion, all replies from the ARP targets will be received on
 	the same link which could cause the other team members to
-	fail. ARP monitoring should not be used in conjunction with
-	miimon. A value of 0 disables ARP monitoring. The default
+	fail.  ARP monitoring should not be used in conjunction with
+	miimon.  A value of 0 disables ARP monitoring.  The default
 	value is 0.
 
 arp_ip_target
 
-	Specifies the ip addresses to use when arp_interval is > 0.
-	These are the targets of the ARP request sent to determine the
-	health of the link to the targets.  Specify these values in
-	ddd.ddd.ddd.ddd format.  Multiple ip adresses must be
-	seperated by a comma.  At least one IP address must be given
-	for ARP monitoring to function.  The maximum number of targets
-	that can be specified is 16.  The default value is no IP
-	addresses.
+	Specifies the IP addresses to use as ARP monitoring peers when
+	arp_interval is > 0.  These are the targets of the ARP request
+	sent to determine the health of the link to the targets.
+	Specify these values in ddd.ddd.ddd.ddd format.  Multiple IP
+	addresses must be separated by a comma.  At least one IP
+	address must be given for ARP monitoring to function.  The
+	maximum number of targets that can be specified is 16.  The
+	default value is no IP addresses.
 
 downdelay
 
@@ -207,11 +223,13 @@
 	are:
 
 	slow or 0
-		Request partner to transmit LACPDUs every 30 seconds (default)
+		Request partner to transmit LACPDUs every 30 seconds
 
 	fast or 1
 		Request partner to transmit LACPDUs every 1 second
 
+	The default is slow.
+
 max_bonds
 
 	Specifies the number of bonding devices to create for this
@@ -221,10 +239,11 @@
 
 miimon
 
-	Specifies the frequency in milli-seconds that MII link
-	monitoring will occur.  A value of zero disables MII link
-	monitoring.  A value of 100 is a good starting point.  The
-	use_carrier option, below, affects how the link state is
+	Specifies the MII link monitoring frequency in milliseconds.
+	This determines how often the link state of each slave is
+	inspected for link failures.  A value of zero disables MII
+	link monitoring.  A value of 100 is a good starting point.
+	The use_carrier option, below, affects how the link state is
 	determined.  See the High Availability section for additional
 	information.  The default value is 0.
 
@@ -246,17 +265,31 @@
 		active.  A different slave becomes active if, and only
 		if, the active slave fails.  The bond's MAC address is
 		externally visible on only one port (network adapter)
-		to avoid confusing the switch.  This mode provides
-		fault tolerance.  The primary option affects the
-		behavior of this mode.
+		to avoid confusing the switch.
+
+		In bonding version 2.6.2 or later, when a failover
+		occurs in active-backup mode, bonding will issue one
+		or more gratuitous ARPs on the newly active slave.
+		One gratutious ARP is issued for the bonding master
+		interface and each VLAN interfaces configured above
+		it, provided that the interface has at least one IP
+		address configured.  Gratuitous ARPs issued for VLAN
+		interfaces are tagged with the appropriate VLAN id.
+
+		This mode provides fault tolerance.  The primary
+		option, documented below, affects the behavior of this
+		mode.
 
 	balance-xor or 2
 
-		XOR policy: Transmit based on [(source MAC address
-		XOR'd with destination MAC address) modulo slave
-		count].  This selects the same slave for each
-		destination MAC address.  This mode provides load
-		balancing and fault tolerance.
+		XOR policy: Transmit based on the selected transmit
+		hash policy.  The default policy is a simple [(source
+		MAC address XOR'd with destination MAC address) modulo
+		slave count].  Alternate transmit policies may be
+		selected via the xmit_hash_policy option, described
+		below.
+
+		This mode provides load balancing and fault tolerance.
 
 	broadcast or 3
 
@@ -270,7 +303,17 @@
 		duplex settings.  Utilizes all slaves in the active
 		aggregator according to the 802.3ad specification.
 
-		Pre-requisites:
+		Slave selection for outgoing traffic is done according
+		to the transmit hash policy, which may be changed from
+		the default simple XOR policy via the xmit_hash_policy
+		option, documented below.  Note that not all transmit
+		policies may be 802.3ad compliant, particularly in
+		regards to the packet mis-ordering requirements of
+		section 43.2.4 of the 802.3ad standard.  Differing
+		peer implementations will have varying tolerances for
+		noncompliance.
+
+		Prerequisites:
 
 		1. Ethtool support in the base drivers for retrieving
 		the speed and duplex of each slave.
@@ -333,7 +376,7 @@
 
 		When a link is reconnected or a new slave joins the
 		bond the receive traffic is redistributed among all
-		active slaves in the bond by intiating ARP Replies
+		active slaves in the bond by initiating ARP Replies
 		with the selected mac address to each of the
 		clients. The updelay parameter (detailed below) must
 		be set to a value equal or greater than the switch's
@@ -396,6 +439,60 @@
 	0 will use the deprecated MII / ETHTOOL ioctls.  The default
 	value is 1.
 
+xmit_hash_policy
+
+	Selects the transmit hash policy to use for slave selection in
+	balance-xor and 802.3ad modes.  Possible values are:
+
+	layer2
+
+		Uses XOR of hardware MAC addresses to generate the
+		hash.  The formula is
+
+		(source MAC XOR destination MAC) modulo slave count
+
+		This algorithm will place all traffic to a particular
+		network peer on the same slave.
+
+		This algorithm is 802.3ad compliant.
+
+	layer3+4
+
+		This policy uses upper layer protocol information,
+		when available, to generate the hash.  This allows for
+		traffic to a particular network peer to span multiple
+		slaves, although a single connection will not span
+		multiple slaves.
+
+		The formula for unfragmented TCP and UDP packets is
+
+		((source port XOR dest port) XOR
+			 ((source IP XOR dest IP) AND 0xffff)
+				modulo slave count
+
+		For fragmented TCP or UDP packets and all other IP
+		protocol traffic, the source and destination port
+		information is omitted.  For non-IP traffic, the
+		formula is the same as for the layer2 transmit hash
+		policy.
+
+		This policy is intended to mimic the behavior of
+		certain switches, notably Cisco switches with PFC2 as
+		well as some Foundry and IBM products.
+
+		This algorithm is not fully 802.3ad compliant.  A
+		single TCP or UDP conversation containing both
+		fragmented and unfragmented packets will see packets
+		striped across two interfaces.  This may result in out
+		of order delivery.  Most traffic types will not meet
+		this criteria, as TCP rarely fragments traffic, and
+		most UDP traffic is not involved in extended
+		conversations.  Other implementations of 802.3ad may
+		or may not tolerate this noncompliance.
+
+	The default value is layer2.  This option was added in bonding
+version 2.6.3.  In earlier versions of bonding, this parameter does
+not exist, and the layer2 policy is the only policy.
 
 
 3. Configuring Bonding Devices
@@ -448,8 +545,9 @@
 slave devices.  On SLES 9, this is most easily done by running the
 yast2 sysconfig configuration utility.  The goal is for to create an
 ifcfg-id file for each slave device.  The simplest way to accomplish
-this is to configure the devices for DHCP.  The name of the
-configuration file for each device will be of the form:
+this is to configure the devices for DHCP (this is only to get the
+file ifcfg-id file created; see below for some issues with DHCP).  The
+name of the configuration file for each device will be of the form:
 
 ifcfg-id-xx:xx:xx:xx:xx:xx
 
@@ -459,7 +557,7 @@
 	Once the set of ifcfg-id-xx:xx:xx:xx:xx:xx files has been
 created, it is necessary to edit the configuration files for the slave
 devices (the MAC addresses correspond to those of the slave devices).
-Before editing, the file will contain muliple lines, and will look
+Before editing, the file will contain multiple lines, and will look
 something like this:
 
 BOOTPROTO='dhcp'
@@ -496,16 +594,11 @@
 BONDING_MASTER="yes"
 BONDING_MODULE_OPTS="mode=active-backup miimon=100"
 BONDING_SLAVE0="eth0"
-BONDING_SLAVE1="eth1"
+BONDING_SLAVE1="bus-pci-0000:06:08.1"
 
 	Replace the sample BROADCAST, IPADDR, NETMASK and NETWORK
 values with the appropriate values for your network.
 
-	Note that configuring the bonding device with BOOTPROTO='dhcp'
-does not work; the scripts attempt to obtain the device address from
-DHCP prior to adding any of the slave devices.  Without active slaves,
-the DHCP requests are not sent to the network.
-
 	The STARTMODE specifies when the device is brought online.
 The possible values are:
 
@@ -531,9 +624,17 @@
 the max_bonds bonding parameter; this will confuse the configuration
 system if you have multiple bonding devices.
 
-	Finally, supply one BONDING_SLAVEn="ethX" for each slave,
-where "n" is an increasing value, one for each slave, and "ethX" is
-the name of the slave device (eth0, eth1, etc).
+	Finally, supply one BONDING_SLAVEn="slave device" for each
+slave.  where "n" is an increasing value, one for each slave.  The
+"slave device" is either an interface name, e.g., "eth0", or a device
+specifier for the network device.  The interface name is easier to
+find, but the ethN names are subject to change at boot time if, e.g.,
+a device early in the sequence has failed.  The device specifiers
+(bus-pci-0000:06:08.1 in the example above) specify the physical
+network device, and will not change unless the device's bus location
+changes (for example, it is moved from one PCI slot to another).  The
+example above uses one of each type for demonstration purposes; most
+configurations will choose one or the other for all slave devices.
 
 	When all configuration files have been modified or created,
 networking must be restarted for the configuration changes to take
@@ -544,7 +645,7 @@
 	Note that the network control script (/sbin/ifdown) will
 remove the bonding module as part of the network shutdown processing,
 so it is not necessary to remove the module by hand if, e.g., the
-module paramters have changed.
+module parameters have changed.
 
 	Also, at this writing, YaST/YaST2 will not manage bonding
 devices (they do not show bonding interfaces on its list of network
@@ -559,12 +660,37 @@
 	Note that the template does not document the various BONDING_
 settings described above, but does describe many of the other options.
 
+3.1.1 Using DHCP with sysconfig
+-------------------------------
+
+	Under sysconfig, configuring a device with BOOTPROTO='dhcp'
+will cause it to query DHCP for its IP address information.  At this
+writing, this does not function for bonding devices; the scripts
+attempt to obtain the device address from DHCP prior to adding any of
+the slave devices.  Without active slaves, the DHCP requests are not
+sent to the network.
+
+3.1.2 Configuring Multiple Bonds with sysconfig
+-----------------------------------------------
+
+	The sysconfig network initialization system is capable of
+handling multiple bonding devices.  All that is necessary is for each
+bonding instance to have an appropriately configured ifcfg-bondX file
+(as described above).  Do not specify the "max_bonds" parameter to any
+instance of bonding, as this will confuse sysconfig.  If you require
+multiple bonding devices with identical parameters, create multiple
+ifcfg-bondX files.
+
+	Because the sysconfig scripts supply the bonding module
+options in the ifcfg-bondX file, it is not necessary to add them to
+the system /etc/modules.conf or /etc/modprobe.conf configuration file.
+
 3.2 Configuration with initscripts support
 ------------------------------------------
 
 	This section applies to distros using a version of initscripts
 with bonding support, for example, Red Hat Linux 9 or Red Hat
-Enterprise Linux version 3.  On these systems, the network
+Enterprise Linux version 3 or 4.  On these systems, the network
 initialization scripts have some knowledge of bonding, and can be
 configured to control bonding devices.
 
@@ -614,10 +740,11 @@
 	Be sure to change the networking specific lines (IPADDR,
 NETMASK, NETWORK and BROADCAST) to match your network configuration.
 
-	Finally, it is necessary to edit /etc/modules.conf to load the
-bonding module when the bond0 interface is brought up.  The following
-sample lines in /etc/modules.conf will load the bonding module, and
-select its options:
+	Finally, it is necessary to edit /etc/modules.conf (or
+/etc/modprobe.conf, depending upon your distro) to load the bonding
+module with your desired options when the bond0 interface is brought
+up.  The following lines in /etc/modules.conf (or modprobe.conf) will
+load the bonding module, and select its options:
 
 alias bond0 bonding
 options bond0 mode=balance-alb miimon=100
@@ -629,6 +756,33 @@
 will restart the networking subsystem and your bond link should be now
 up and running.
 
+3.2.1 Using DHCP with initscripts
+---------------------------------
+
+	Recent versions of initscripts (the version supplied with
+Fedora Core 3 and Red Hat Enterprise Linux 4 is reported to work) do
+have support for assigning IP information to bonding devices via DHCP.
+
+	To configure bonding for DHCP, configure it as described
+above, except replace the line "BOOTPROTO=none" with "BOOTPROTO=dhcp"
+and add a line consisting of "TYPE=Bonding".  Note that the TYPE value
+is case sensitive.
+
+3.2.2 Configuring Multiple Bonds with initscripts
+-------------------------------------------------
+
+	At this writing, the initscripts package does not directly
+support loading the bonding driver multiple times, so the process for
+doing so is the same as described in the "Configuring Multiple Bonds
+Manually" section, below.
+
+	NOTE: It has been observed that some Red Hat supplied kernels
+are apparently unable to rename modules at load time (the "-obonding1"
+part).  Attempts to pass that option to modprobe will produce an
+"Operation not permitted" error.  This has been reported on some
+Fedora Core kernels, and has been seen on RHEL 4 as well.  On kernels
+exhibiting this problem, it will be impossible to configure multiple
+bonds with differing parameters.
 
 3.3 Configuring Bonding Manually
 --------------------------------
@@ -638,10 +792,11 @@
 knowledge of bonding.  One such distro is SuSE Linux Enterprise Server
 version 8.
 
-	The general methodology for these systems is to place the
-bonding module parameters into /etc/modprobe.conf, then add modprobe
-and/or ifenslave commands to the system's global init script.  The
-name of the global init script differs; for sysconfig, it is
+	The general method for these systems is to place the bonding
+module parameters into /etc/modules.conf or /etc/modprobe.conf (as
+appropriate for the installed distro), then add modprobe and/or
+ifenslave commands to the system's global init script.  The name of
+the global init script differs; for sysconfig, it is
 /etc/init.d/boot.local and for initscripts it is /etc/rc.d/rc.local.
 
 	For example, if you wanted to make a simple bond of two e100
@@ -649,7 +804,7 @@
 reboots, edit the appropriate file (/etc/init.d/boot.local or
 /etc/rc.d/rc.local), and add the following:
 
-modprobe bonding -obond0 mode=balance-alb miimon=100
+modprobe bonding mode=balance-alb miimon=100
 modprobe e100
 ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
 ifenslave bond0 eth0
@@ -657,11 +812,7 @@
 
 	Replace the example bonding module parameters and bond0
 network configuration (IP address, netmask, etc) with the appropriate
-values for your configuration.  The above example loads the bonding
-module with the name "bond0," this simplifies the naming if multiple
-bonding modules are loaded (each successive instance of the module is
-given a different name, and the module instance names match the
-bonding interface names).
+values for your configuration.
 
 	Unfortunately, this method will not provide support for the
 ifup and ifdown scripts on the bond devices.  To reload the bonding
@@ -684,20 +835,23 @@
 the following:
 
 # ifconfig bond0 down
-# rmmod bond0
+# rmmod bonding
 # rmmod e100
 
 	Again, for convenience, it may be desirable to create a script
 with these commands.
 
 
-3.4 Configuring Multiple Bonds
-------------------------------
+3.3.1 Configuring Multiple Bonds Manually
+-----------------------------------------
 
 	This section contains information on configuring multiple
-bonding devices with differing options.  If you require multiple
-bonding devices, but all with the same options, see the "max_bonds"
-module paramter, documented above.
+bonding devices with differing options for those systems whose network
+initialization scripts lack support for configuring multiple bonds.
+
+	If you require multiple bonding devices, but all with the same
+options, you may wish to use the "max_bonds" module parameter,
+documented above.
 
 	To create multiple bonding devices with differing options, it
 is necessary to load the bonding driver multiple times.  Note that
@@ -724,11 +878,16 @@
 miimon of 100.  The second instance is named "bond1" and creates the
 bond1 device in balance-alb mode with an miimon of 50.
 
-	This may be repeated any number of times, specifying a new and
-unique name in place of bond0 or bond1 for each instance.
+	In some circumstances (typically with older distributions),
+the above does not work, and the second bonding instance never sees
+its options.  In that case, the second options line can be substituted
+as follows:
 
-	When the appropriate module paramters are in place, then
-configure bonding according to the instructions for your distro.
+install bonding1 /sbin/modprobe bonding -obond1 mode=balance-alb miimon=50
+
+	This may be repeated any number of times, specifying a new and
+unique name in place of bond1 for each subsequent instance.
+
 
 5. Querying Bonding Configuration 
 =================================
@@ -846,8 +1005,8 @@
 self generated packets.
 
 	For reasons of simplicity, and to support the use of adapters
-that can do VLAN hardware acceleration offloding, the bonding
-interface declares itself as fully hardware offloaing capable, it gets
+that can do VLAN hardware acceleration offloading, the bonding
+interface declares itself as fully hardware offloading capable, it gets
 the add_vid/kill_vid notifications to gather the necessary
 information, and it propagates those actions to the slaves.  In case
 of mixed adapter types, hardware accelerated tagged packets that
@@ -880,7 +1039,7 @@
 matches the hardware address of the VLAN interfaces.
 
 	Note that changing a VLAN interface's HW address would set the
-underlying device -- i.e. the bonding interface -- to promiscouos
+underlying device -- i.e. the bonding interface -- to promiscuous
 mode, which might not be what you want.
 
 
@@ -923,7 +1082,7 @@
 an additional target (or several) increases the reliability of the ARP
 monitoring.
 
-	Multiple ARP targets must be seperated by commas as follows:
+	Multiple ARP targets must be separated by commas as follows:
 
 # example options for ARP monitoring with three targets
 alias bond0 bonding
@@ -1045,7 +1204,7 @@
 	This will, when loading the bonding module, rather than
 performing the normal action, instead execute the provided command.
 This command loads the device drivers in the order needed, then calls
-modprobe with --ingore-install to cause the normal action to then take
+modprobe with --ignore-install to cause the normal action to then take
 place.  Full documentation on this can be found in the modprobe.conf
 and modprobe manual pages.
 
@@ -1130,14 +1289,14 @@
 common to enable promiscuous mode on the device, so that all traffic
 is seen (instead of seeing only traffic destined for the local host).
 The bonding driver handles promiscuous mode changes to the bonding
-master device (e.g., bond0), and propogates the setting to the slave
+master device (e.g., bond0), and propagates the setting to the slave
 devices.
 
 	For the balance-rr, balance-xor, broadcast, and 802.3ad modes,
-the promiscuous mode setting is propogated to all slaves.
+the promiscuous mode setting is propagated to all slaves.
 
 	For the active-backup, balance-tlb and balance-alb modes, the
-promiscuous mode setting is propogated only to the active slave.
+promiscuous mode setting is propagated only to the active slave.
 
 	For balance-tlb mode, the active slave is the slave currently
 receiving inbound traffic.
@@ -1148,149 +1307,38 @@
 
 	For the active-backup, balance-tlb and balance-alb modes, when
 the active slave changes (e.g., due to a link failure), the
-promiscuous setting will be propogated to the new active slave.
+promiscuous setting will be propagated to the new active slave.
 
-12. High Availability Information
-=================================
+12. Configuring Bonding for High Availability
+=============================================
 
 	High Availability refers to configurations that provide
 maximum network availability by having redundant or backup devices,
-links and switches between the host and the rest of the world.
-
-	There are currently two basic methods for configuring to
-maximize availability. They are dependent on the network topology and
-the primary goal of the configuration, but in general, a configuration
-can be optimized for maximum available bandwidth, or for maximum
-network availability.
+links or switches between the host and the rest of the world.  The
+goal is to provide the maximum availability of network connectivity
+(i.e., the network always works), even though other configurations
+could provide higher throughput.
 
 12.1 High Availability in a Single Switch Topology
 --------------------------------------------------
 
-	If two hosts (or a host and a switch) are directly connected
-via multiple physical links, then there is no network availability
-penalty for optimizing for maximum bandwidth: there is only one switch
-(or peer), so if it fails, you have no alternative access to fail over
-to.
+	If two hosts (or a host and a single switch) are directly
+connected via multiple physical links, then there is no availability
+penalty to optimizing for maximum bandwidth.  In this case, there is
+only one switch (or peer), so if it fails, there is no alternative
+access to fail over to.  Additionally, the bonding load balance modes
+support link monitoring of their members, so if individual links fail,
+the load will be rebalanced across the remaining devices.
 
-Example 1 : host to switch (or other host)
-
-          +----------+                          +----------+
-          |          |eth0                  eth0|  switch  |
-          | Host A   +--------------------------+    or    |
-          |          +--------------------------+  other   |
-          |          |eth1                  eth1|  host    |
-          +----------+                          +----------+
-
-
-12.1.1 Bonding Mode Selection for single switch topology
---------------------------------------------------------
-
-	This configuration is the easiest to set up and to understand,
-although you will have to decide which bonding mode best suits your
-needs.  The tradeoffs for each mode are detailed below:
-
-balance-rr: This mode is the only mode that will permit a single
-	TCP/IP connection to stripe traffic across multiple
-	interfaces. It is therefore the only mode that will allow a
-	single TCP/IP stream to utilize more than one interface's
-	worth of throughput.  This comes at a cost, however: the
-	striping often results in peer systems receiving packets out
-	of order, causing TCP/IP's congestion control system to kick
-	in, often by retransmitting segments.
-
-	It is possible to adjust TCP/IP's congestion limits by
-	altering the net.ipv4.tcp_reordering sysctl parameter.  The
-	usual default value is 3, and the maximum useful value is 127.
-	For a four interface balance-rr bond, expect that a single
-	TCP/IP stream will utilize no more than approximately 2.3
-	interface's worth of throughput, even after adjusting
-	tcp_reordering.
-
-	If you are utilizing protocols other than TCP/IP, UDP for
-	example, and your application can tolerate out of order
-	delivery, then this mode can allow for single stream datagram
-	performance that scales near linearly as interfaces are added
-	to the bond.
-
-	This mode requires the switch to have the appropriate ports
-	configured for "etherchannel" or "trunking."
-
-active-backup: There is not much advantage in this network topology to
-	the active-backup mode, as the inactive backup devices are all
-	connected to the same peer as the primary.  In this case, a
-	load balancing mode (with link monitoring) will provide the
-	same level of network availability, but with increased
-	available bandwidth.  On the plus side, it does not require
-	any configuration of the switch.
-
-balance-xor: This mode will limit traffic such that packets destined
-	for specific peers will always be sent over the same
-	interface.  Since the destination is determined by the MAC
-	addresses involved, this may be desirable if you have a large
-	network with many hosts.  It is likely to be suboptimal if all
-	your traffic is passed through a single router, however.  As
-	with balance-rr, the switch ports need to be configured for
-	"etherchannel" or "trunking."
-
-broadcast: Like active-backup, there is not much advantage to this
-	mode in this type of network topology.
-
-802.3ad: This mode can be a good choice for this type of network
-	topology.  The 802.3ad mode is an IEEE standard, so all peers
-	that implement 802.3ad should interoperate well.  The 802.3ad
-	protocol includes automatic configuration of the aggregates,
-	so minimal manual configuration of the switch is needed
-	(typically only to designate that some set of devices is
-	usable for 802.3ad).  The 802.3ad standard also mandates that
-	frames be delivered in order (within certain limits), so in
-	general single connections will not see misordering of
-	packets.  The 802.3ad mode does have some drawbacks: the
-	standard mandates that all devices in the aggregate operate at
-	the same speed and duplex.  Also, as with all bonding load
-	balance modes other than balance-rr, no single connection will
-	be able to utilize more than a single interface's worth of
-	bandwidth.  Additionally, the linux bonding 802.3ad
-	implementation distributes traffic by peer (using an XOR of
-	MAC addresses), so in general all traffic to a particular
-	destination will use the same interface.  Finally, the 802.3ad
-	mode mandates the use of the MII monitor, therefore, the ARP
-	monitor is not available in this mode.
-
-balance-tlb: This mode is also a good choice for this type of
-	topology.  It has no special switch configuration
-	requirements, and balances outgoing traffic by peer, in a
-	vaguely intelligent manner (not a simple XOR as in balance-xor
-	or 802.3ad mode), so that unlucky MAC addresses will not all
-	"bunch up" on a single interface.  Interfaces may be of
-	differing speeds.  On the down side, in this mode all incoming
-	traffic arrives over a single interface, this mode requires
-	certain ethtool support in the network device driver of the
-	slave interfaces, and the ARP monitor is not available.
-
-balance-alb: This mode is everything that balance-tlb is, and more. It
-	has all of the features (and restrictions) of balance-tlb, and
-	will also balance incoming traffic from peers (as described in
-	the Bonding Module Options section, above).  The only extra
-	down side to this mode is that the network device driver must
-	support changing the hardware address while the device is
-	open.
-
-12.1.2 Link Monitoring for Single Switch Topology
--------------------------------------------------
-
-	The choice of link monitoring may largely depend upon which
-mode you choose to use.  The more advanced load balancing modes do not
-support the use of the ARP monitor, and are thus restricted to using
-the MII monitor (which does not provide as high a level of assurance
-as the ARP monitor).
-
+	See Section 13, "Configuring Bonding for Maximum Throughput"
+for information on configuring bonding with one peer device.
 
 12.2 High Availability in a Multiple Switch Topology
 ----------------------------------------------------
 
 	With multiple switches, the configuration of bonding and the
 network changes dramatically.  In multiple switch topologies, there is
-a tradeoff between network availability and usable bandwidth.
+a trade off between network availability and usable bandwidth.
 
 	Below is a sample network, configured to maximize the
 availability of the network:
@@ -1312,12 +1360,13 @@
 the outside world ("port3" on each switch).  There is no technical
 reason that this could not be extended to a third switch.
 
-12.2.1 Bonding Mode Selection for Multiple Switch Topology
-----------------------------------------------------------
+12.2.1 HA Bonding Mode Selection for Multiple Switch Topology
+-------------------------------------------------------------
 
-	In a topology such as this, the active-backup and broadcast
-modes are the only useful bonding modes; the other modes require all
-links to terminate on the same peer for them to behave rationally.
+	In a topology such as the example above, the active-backup and
+broadcast modes are the only useful bonding modes when optimizing for
+availability; the other modes require all links to terminate on the
+same peer for them to behave rationally.
 
 active-backup: This is generally the preferred mode, particularly if
 	the switches have an ISL and play together well.  If the
@@ -1329,12 +1378,12 @@
 broadcast: This mode is really a special purpose mode, and is suitable
 	only for very specific needs.  For example, if the two
 	switches are not connected (no ISL), and the networks beyond
-	them are totally independant.  In this case, if it is
+	them are totally independent.  In this case, if it is
 	necessary for some specific one-way traffic to reach both
 	independent networks, then the broadcast mode may be suitable.
 
-12.2.2 Link Monitoring Selection for Multiple Switch Topology
--------------------------------------------------------------
+12.2.2 HA Link Monitoring Selection for Multiple Switch Topology
+----------------------------------------------------------------
 
 	The choice of link monitoring ultimately depends upon your
 switch.  If the switch can reliably fail ports in response to other
@@ -1345,18 +1394,295 @@
 thus detecting that failure without switch support.
 
 	In general, however, in a multiple switch topology, the ARP
-monitor can provide a higher level of reliability in detecting link
-failures.  Additionally, it should be configured with multiple targets
-(at least one for each switch in the network).  This will insure that,
+monitor can provide a higher level of reliability in detecting end to
+end connectivity failures (which may be caused by the failure of any
+individual component to pass traffic for any reason).  Additionally,
+the ARP monitor should be configured with multiple targets (at least
+one for each switch in the network).  This will insure that,
 regardless of which switch is active, the ARP monitor has a suitable
 target to query.
 
 
-12.3 Switch Behavior Issues for High Availability
--------------------------------------------------
+13. Configuring Bonding for Maximum Throughput
+==============================================
 
-	You may encounter issues with the timing of link up and down
-reporting by the switch.
+13.1 Maximizing Throughput in a Single Switch Topology
+------------------------------------------------------
+
+	In a single switch configuration, the best method to maximize
+throughput depends upon the application and network environment.  The
+various load balancing modes each have strengths and weaknesses in
+different environments, as detailed below.
+
+	For this discussion, we will break down the topologies into
+two categories.  Depending upon the destination of most traffic, we
+categorize them into either "gatewayed" or "local" configurations.
+
+	In a gatewayed configuration, the "switch" is acting primarily
+as a router, and the majority of traffic passes through this router to
+other networks.  An example would be the following:
+
+
+     +----------+                     +----------+
+     |          |eth0            port1|          | to other networks
+     | Host A   +---------------------+ router   +------------------->
+     |          +---------------------+          | Hosts B and C are out
+     |          |eth1            port2|          | here somewhere
+     +----------+                     +----------+
+
+	The router may be a dedicated router device, or another host
+acting as a gateway.  For our discussion, the important point is that
+the majority of traffic from Host A will pass through the router to
+some other network before reaching its final destination.
+
+	In a gatewayed network configuration, although Host A may
+communicate with many other systems, all of its traffic will be sent
+and received via one other peer on the local network, the router.
+
+	Note that the case of two systems connected directly via
+multiple physical links is, for purposes of configuring bonding, the
+same as a gatewayed configuration.  In that case, it happens that all
+traffic is destined for the "gateway" itself, not some other network
+beyond the gateway.
+
+	In a local configuration, the "switch" is acting primarily as
+a switch, and the majority of traffic passes through this switch to
+reach other stations on the same network.  An example would be the
+following:
+
+    +----------+            +----------+       +--------+
+    |          |eth0   port1|          +-------+ Host B |
+    |  Host A  +------------+  switch  |port3  +--------+
+    |          +------------+          |                  +--------+
+    |          |eth1   port2|          +------------------+ Host C |
+    +----------+            +----------+port4             +--------+
+
+
+	Again, the switch may be a dedicated switch device, or another
+host acting as a gateway.  For our discussion, the important point is
+that the majority of traffic from Host A is destined for other hosts
+on the same local network (Hosts B and C in the above example).
+
+	In summary, in a gatewayed configuration, traffic to and from
+the bonded device will be to the same MAC level peer on the network
+(the gateway itself, i.e., the router), regardless of its final
+destination.  In a local configuration, traffic flows directly to and
+from the final destinations, thus, each destination (Host B, Host C)
+will be addressed directly by their individual MAC addresses.
+
+	This distinction between a gatewayed and a local network
+configuration is important because many of the load balancing modes
+available use the MAC addresses of the local network source and
+destination to make load balancing decisions.  The behavior of each
+mode is described below.
+
+
+13.1.1 MT Bonding Mode Selection for Single Switch Topology
+-----------------------------------------------------------
+
+	This configuration is the easiest to set up and to understand,
+although you will have to decide which bonding mode best suits your
+needs.  The trade offs for each mode are detailed below:
+
+balance-rr: This mode is the only mode that will permit a single
+	TCP/IP connection to stripe traffic across multiple
+	interfaces. It is therefore the only mode that will allow a
+	single TCP/IP stream to utilize more than one interface's
+	worth of throughput.  This comes at a cost, however: the
+	striping often results in peer systems receiving packets out
+	of order, causing TCP/IP's congestion control system to kick
+	in, often by retransmitting segments.
+
+	It is possible to adjust TCP/IP's congestion limits by
+	altering the net.ipv4.tcp_reordering sysctl parameter.  The
+	usual default value is 3, and the maximum useful value is 127.
+	For a four interface balance-rr bond, expect that a single
+	TCP/IP stream will utilize no more than approximately 2.3
+	interface's worth of throughput, even after adjusting
+	tcp_reordering.
+
+	Note that this out of order delivery occurs when both the
+	sending and receiving systems are utilizing a multiple
+	interface bond.  Consider a configuration in which a
+	balance-rr bond feeds into a single higher capacity network
+	channel (e.g., multiple 100Mb/sec ethernets feeding a single
+	gigabit ethernet via an etherchannel capable switch).  In this
+	configuration, traffic sent from the multiple 100Mb devices to
+	a destination connected to the gigabit device will not see
+	packets out of order.  However, traffic sent from the gigabit
+	device to the multiple 100Mb devices may or may not see
+	traffic out of order, depending upon the balance policy of the
+	switch.  Many switches do not support any modes that stripe
+	traffic (instead choosing a port based upon IP or MAC level
+	addresses); for those devices, traffic flowing from the
+	gigabit device to the many 100Mb devices will only utilize one
+	interface.
+
+	If you are utilizing protocols other than TCP/IP, UDP for
+	example, and your application can tolerate out of order
+	delivery, then this mode can allow for single stream datagram
+	performance that scales near linearly as interfaces are added
+	to the bond.
+
+	This mode requires the switch to have the appropriate ports
+	configured for "etherchannel" or "trunking."
+
+active-backup: There is not much advantage in this network topology to
+	the active-backup mode, as the inactive backup devices are all
+	connected to the same peer as the primary.  In this case, a
+	load balancing mode (with link monitoring) will provide the
+	same level of network availability, but with increased
+	available bandwidth.  On the plus side, active-backup mode
+	does not require any configuration of the switch, so it may
+	have value if the hardware available does not support any of
+	the load balance modes.
+
+balance-xor: This mode will limit traffic such that packets destined
+	for specific peers will always be sent over the same
+	interface.  Since the destination is determined by the MAC
+	addresses involved, this mode works best in a "local" network
+	configuration (as described above), with destinations all on
+	the same local network.  This mode is likely to be suboptimal
+	if all your traffic is passed through a single router (i.e., a
+	"gatewayed" network configuration, as described above).
+
+	As with balance-rr, the switch ports need to be configured for
+	"etherchannel" or "trunking."
+
+broadcast: Like active-backup, there is not much advantage to this
+	mode in this type of network topology.
+
+802.3ad: This mode can be a good choice for this type of network
+	topology.  The 802.3ad mode is an IEEE standard, so all peers
+	that implement 802.3ad should interoperate well.  The 802.3ad
+	protocol includes automatic configuration of the aggregates,
+	so minimal manual configuration of the switch is needed
+	(typically only to designate that some set of devices is
+	available for 802.3ad).  The 802.3ad standard also mandates
+	that frames be delivered in order (within certain limits), so
+	in general single connections will not see misordering of
+	packets.  The 802.3ad mode does have some drawbacks: the
+	standard mandates that all devices in the aggregate operate at
+	the same speed and duplex.  Also, as with all bonding load
+	balance modes other than balance-rr, no single connection will
+	be able to utilize more than a single interface's worth of
+	bandwidth.  
+
+	Additionally, the linux bonding 802.3ad implementation
+	distributes traffic by peer (using an XOR of MAC addresses),
+	so in a "gatewayed" configuration, all outgoing traffic will
+	generally use the same device.  Incoming traffic may also end
+	up on a single device, but that is dependent upon the
+	balancing policy of the peer's 8023.ad implementation.  In a
+	"local" configuration, traffic will be distributed across the
+	devices in the bond.
+
+	Finally, the 802.3ad mode mandates the use of the MII monitor,
+	therefore, the ARP monitor is not available in this mode.
+
+balance-tlb: The balance-tlb mode balances outgoing traffic by peer.
+	Since the balancing is done according to MAC address, in a
+	"gatewayed" configuration (as described above), this mode will
+	send all traffic across a single device.  However, in a
+	"local" network configuration, this mode balances multiple
+	local network peers across devices in a vaguely intelligent
+	manner (not a simple XOR as in balance-xor or 802.3ad mode),
+	so that mathematically unlucky MAC addresses (i.e., ones that
+	XOR to the same value) will not all "bunch up" on a single
+	interface.
+
+	Unlike 802.3ad, interfaces may be of differing speeds, and no
+	special switch configuration is required.  On the down side,
+	in this mode all incoming traffic arrives over a single
+	interface, this mode requires certain ethtool support in the
+	network device driver of the slave interfaces, and the ARP
+	monitor is not available.
+
+balance-alb: This mode is everything that balance-tlb is, and more.
+	It has all of the features (and restrictions) of balance-tlb,
+	and will also balance incoming traffic from local network
+	peers (as described in the Bonding Module Options section,
+	above).
+
+	The only additional down side to this mode is that the network
+	device driver must support changing the hardware address while
+	the device is open.
+
+13.1.2 MT Link Monitoring for Single Switch Topology
+----------------------------------------------------
+
+	The choice of link monitoring may largely depend upon which
+mode you choose to use.  The more advanced load balancing modes do not
+support the use of the ARP monitor, and are thus restricted to using
+the MII monitor (which does not provide as high a level of end to end
+assurance as the ARP monitor).
+
+13.2 Maximum Throughput in a Multiple Switch Topology
+-----------------------------------------------------
+
+	Multiple switches may be utilized to optimize for throughput
+when they are configured in parallel as part of an isolated network
+between two or more systems, for example:
+
+                       +-----------+
+                       |  Host A   | 
+                       +-+---+---+-+
+                         |   |   |
+                +--------+   |   +---------+
+                |            |             |
+         +------+---+  +-----+----+  +-----+----+
+         | Switch A |  | Switch B |  | Switch C |
+         +------+---+  +-----+----+  +-----+----+
+                |            |             |
+                +--------+   |   +---------+
+                         |   |   |
+                       +-+---+---+-+
+                       |  Host B   | 
+                       +-----------+
+
+	In this configuration, the switches are isolated from one
+another.  One reason to employ a topology such as this is for an
+isolated network with many hosts (a cluster configured for high
+performance, for example), using multiple smaller switches can be more
+cost effective than a single larger switch, e.g., on a network with 24
+hosts, three 24 port switches can be significantly less expensive than
+a single 72 port switch.
+
+	If access beyond the network is required, an individual host
+can be equipped with an additional network device connected to an
+external network; this host then additionally acts as a gateway.
+
+13.2.1 MT Bonding Mode Selection for Multiple Switch Topology
+-------------------------------------------------------------
+
+	In actual practice, the bonding mode typically employed in
+configurations of this type is balance-rr.  Historically, in this
+network configuration, the usual caveats about out of order packet
+delivery are mitigated by the use of network adapters that do not do
+any kind of packet coalescing (via the use of NAPI, or because the
+device itself does not generate interrupts until some number of
+packets has arrived).  When employed in this fashion, the balance-rr
+mode allows individual connections between two hosts to effectively
+utilize greater than one interface's bandwidth.
+
+13.2.2 MT Link Monitoring for Multiple Switch Topology
+------------------------------------------------------
+
+	Again, in actual practice, the MII monitor is most often used
+in this configuration, as performance is given preference over
+availability.  The ARP monitor will function in this topology, but its
+advantages over the MII monitor are mitigated by the volume of probes
+needed as the number of systems involved grows (remember that each
+host in the network is configured with bonding).
+
+14. Switch Behavior Issues
+==========================
+
+14.1 Link Establishment and Failover Delays
+-------------------------------------------
+
+	Some switches exhibit undesirable behavior with regard to the
+timing of link up and down reporting by the switch.
 
 	First, when a link comes up, some switches may indicate that
 the link is up (carrier available), but not pass traffic over the
@@ -1370,30 +1696,70 @@
 	Second, some switches may "bounce" the link state one or more
 times while a link is changing state.  This occurs most commonly while
 the switch is initializing.  Again, an appropriate updelay value may
-help, but note that if all links are down, then updelay is ignored
-when any link becomes active (the slave closest to completing its
-updelay is chosen).
+help.
 
 	Note that when a bonding interface has no active links, the
-driver will immediately reuse the first link that goes up, even if
-updelay parameter was specified.  If there are slave interfaces
-waiting for the updelay timeout to expire, the interface that first
-went into that state will be immediately reused.  This reduces down
-time of the network if the value of updelay has been overestimated.
+driver will immediately reuse the first link that goes up, even if the
+updelay parameter has been specified (the updelay is ignored in this
+case).  If there are slave interfaces waiting for the updelay timeout
+to expire, the interface that first went into that state will be
+immediately reused.  This reduces down time of the network if the
+value of updelay has been overestimated, and since this occurs only in
+cases with no connectivity, there is no additional penalty for
+ignoring the updelay.
 
 	In addition to the concerns about switch timings, if your
 switches take a long time to go into backup mode, it may be desirable
 to not activate a backup interface immediately after a link goes down.
 Failover may be delayed via the downdelay bonding module option.
 
-13. Hardware Specific Considerations
+14.2 Duplicated Incoming Packets
+--------------------------------
+
+	It is not uncommon to observe a short burst of duplicated
+traffic when the bonding device is first used, or after it has been
+idle for some period of time.  This is most easily observed by issuing
+a "ping" to some other host on the network, and noticing that the
+output from ping flags duplicates (typically one per slave).
+
+	For example, on a bond in active-backup mode with five slaves
+all connected to one switch, the output may appear as follows:
+
+# ping -n 10.0.4.2
+PING 10.0.4.2 (10.0.4.2) from 10.0.3.10 : 56(84) bytes of data.
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.7 ms
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=1 ttl=64 time=13.8 ms (DUP!)
+64 bytes from 10.0.4.2: icmp_seq=2 ttl=64 time=0.216 ms
+64 bytes from 10.0.4.2: icmp_seq=3 ttl=64 time=0.267 ms
+64 bytes from 10.0.4.2: icmp_seq=4 ttl=64 time=0.222 ms
+
+	This is not due to an error in the bonding driver, rather, it
+is a side effect of how many switches update their MAC forwarding
+tables.  Initially, the switch does not associate the MAC address in
+the packet with a particular switch port, and so it may send the
+traffic to all ports until its MAC forwarding table is updated.  Since
+the interfaces attached to the bond may occupy multiple ports on a
+single switch, when the switch (temporarily) floods the traffic to all
+ports, the bond device receives multiple copies of the same packet
+(one per slave device).
+
+	The duplicated packet behavior is switch dependent, some
+switches exhibit this, and some do not.  On switches that display this
+behavior, it can be induced by clearing the MAC forwarding table (on
+most Cisco switches, the privileged command "clear mac address-table
+dynamic" will accomplish this).
+
+15. Hardware Specific Considerations
 ====================================
 
 	This section contains additional information for configuring
 bonding on specific hardware platforms, or for interfacing bonding
 with particular switches or other devices.
 
-13.1 IBM BladeCenter
+15.1 IBM BladeCenter
 --------------------
 
 	This applies to the JS20 and similar systems.
@@ -1407,12 +1773,12 @@
 --------------------------------
 
 	All JS20s come with two Broadcom Gigabit Ethernet ports
-integrated on the planar.  In the BladeCenter chassis, the eth0 port
-of all JS20 blades is hard wired to I/O Module #1; similarly, all eth1
-ports are wired to I/O Module #2.  An add-on Broadcom daughter card
-can be installed on a JS20 to provide two more Gigabit Ethernet ports.
-These ports, eth2 and eth3, are wired to I/O Modules 3 and 4,
-respectively.
+integrated on the planar (that's "motherboard" in IBM-speak).  In the
+BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
+I/O Module #1; similarly, all eth1 ports are wired to I/O Module #2.
+An add-on Broadcom daughter card can be installed on a JS20 to provide
+two more Gigabit Ethernet ports.  These ports, eth2 and eth3, are
+wired to I/O Modules 3 and 4, respectively.
 
 	Each I/O Module may contain either a switch or a passthrough
 module (which allows ports to be directly connected to an external
@@ -1432,29 +1798,30 @@
 of ways, this discussion will be confined to describing basic
 configurations.
 
-	Normally, Ethernet Switch Modules (ESM) are used in I/O
+	Normally, Ethernet Switch Modules (ESMs) are used in I/O
 modules 1 and 2.  In this configuration, the eth0 and eth1 ports of a
 JS20 will be connected to different internal switches (in the
 respective I/O modules).
 
-	An optical passthru module (OPM) connects the I/O module
-directly to an external switch.  By using OPMs in I/O module #1 and
-#2, the eth0 and eth1 interfaces of a JS20 can be redirected to the
-outside world and connected to a common external switch.
+	A passthrough module (OPM or CPM, optical or copper,
+passthrough module) connects the I/O module directly to an external
+switch.  By using PMs in I/O module #1 and #2, the eth0 and eth1
+interfaces of a JS20 can be redirected to the outside world and
+connected to a common external switch.
 
-	Depending upon the mix of ESM and OPM modules, the network
-will appear to bonding as either a single switch topology (all OPM
-modules) or as a multiple switch topology (one or more ESM modules,
-zero or more OPM modules).  It is also possible to connect ESM modules
-together, resulting in a configuration much like the example in "High
-Availability in a multiple switch topology."
+	Depending upon the mix of ESMs and PMs, the network will
+appear to bonding as either a single switch topology (all PMs) or as a
+multiple switch topology (one or more ESMs, zero or more PMs).  It is
+also possible to connect ESMs together, resulting in a configuration
+much like the example in "High Availability in a Multiple Switch
+Topology," above.
 
-Requirements for specifc modes
-------------------------------
+Requirements for specific modes
+-------------------------------
 
-	The balance-rr mode requires the use of OPM modules for
-devices in the bond, all connected to an common external switch.  That
-switch must be configured for "etherchannel" or "trunking" on the
+	The balance-rr mode requires the use of passthrough modules
+for devices in the bond, all connected to an common external switch.
+That switch must be configured for "etherchannel" or "trunking" on the
 appropriate ports, as is usual for balance-rr.
 
 	The balance-alb and balance-tlb modes will function with
@@ -1484,17 +1851,18 @@
 Other concerns
 --------------
 
-	The Serial Over LAN link is established over the primary
+	The Serial Over LAN (SoL) link is established over the primary
 ethernet (eth0) only, therefore, any loss of link to eth0 will result
 in losing your SoL connection.  It will not fail over with other
-network traffic.
+network traffic, as the SoL system is beyond the control of the
+bonding driver.
 
 	It may be desirable to disable spanning tree on the switch
 (either the internal Ethernet Switch Module, or an external switch) to
-avoid fail-over delays issues when using bonding.
+avoid fail-over delay issues when using bonding.
 
 	
-14. Frequently Asked Questions
+16. Frequently Asked Questions
 ==============================
 
 1.  Is it SMP safe?
@@ -1505,8 +1873,8 @@
 2.  What type of cards will work with it?
 
 	Any Ethernet type cards (you can even mix cards - a Intel
-EtherExpress PRO/100 and a 3com 3c905b, for example).  They need not
-be of the same speed.
+EtherExpress PRO/100 and a 3com 3c905b, for example).  For most modes,
+devices need not be of the same speed.
 
 3.  How many bonding devices can I have?
 
@@ -1524,11 +1892,12 @@
 disabled.  The active-backup mode will fail over to a backup link, and
 other modes will ignore the failed link.  The link will continue to be
 monitored, and should it recover, it will rejoin the bond (in whatever
-manner is appropriate for the mode). See the section on High
-Availability for additional information.
+manner is appropriate for the mode). See the sections on High
+Availability and the documentation for each mode for additional
+information.
 	
 	Link monitoring can be enabled via either the miimon or
-arp_interval paramters (described in the module paramters section,
+arp_interval parameters (described in the module parameters section,
 above).  In general, miimon monitors the carrier state as sensed by
 the underlying network device, and the arp monitor (arp_interval)
 monitors connectivity to another host on the local network.
@@ -1536,7 +1905,7 @@
 	If no link monitoring is configured, the bonding driver will
 be unable to detect link failures, and will assume that all links are
 always available.  This will likely result in lost packets, and a
-resulting degredation of performance.  The precise performance loss
+resulting degradation of performance.  The precise performance loss
 depends upon the bonding mode and network configuration.
 
 6.  Can bonding be used for High Availability?
@@ -1550,12 +1919,12 @@
 	In the basic balance modes (balance-rr and balance-xor), it
 works with any system that supports etherchannel (also called
 trunking).  Most managed switches currently available have such
-support, and many unmananged switches as well.
+support, and many unmanaged switches as well.
 
 	The advanced balance modes (balance-tlb and balance-alb) do
 not have special switch requirements, but do need device drivers that
 support specific features (described in the appropriate section under
-module paramters, above).
+module parameters, above).
 
 	In 802.3ad mode, it works with with systems that support IEEE
 802.3ad Dynamic Link Aggregation.  Most managed and many unmanaged
@@ -1565,17 +1934,19 @@
 
 8.  Where does a bonding device get its MAC address from?
 
-	If not explicitly configured with ifconfig, the MAC address of
-the bonding device is taken from its first slave device. This MAC
-address is then passed to all following slaves and remains persistent
-(even if the the first slave is removed) until the bonding device is
-brought down or reconfigured.
+	If not explicitly configured (with ifconfig or ip link), the
+MAC address of the bonding device is taken from its first slave
+device.  This MAC address is then passed to all following slaves and
+remains persistent (even if the the first slave is removed) until the
+bonding device is brought down or reconfigured.
 
 	If you wish to change the MAC address, you can set it with
-ifconfig:
+ifconfig or ip link:
 
 # ifconfig bond0 hw ether 00:11:22:33:44:55
 
+# ip link set bond0 address 66:77:88:99:aa:bb
+
 	The MAC address can be also changed by bringing down/up the
 device and then changing its slaves (or their order):
 
@@ -1591,24 +1962,29 @@
 then restore the MAC addresses that the slaves had before they were
 enslaved.
 
-15. Resources and Links
+16. Resources and Links
 =======================
 
 The latest version of the bonding driver can be found in the latest
 version of the linux kernel, found on http://kernel.org
 
+The latest version of this document can be found in either the latest
+kernel source (named Documentation/networking/bonding.txt), or on the
+bonding sourceforge site:
+
+http://www.sourceforge.net/projects/bonding
+
 Discussions regarding the bonding driver take place primarily on the
 bonding-devel mailing list, hosted at sourceforge.net.  If you have
-questions or problems, post them to the list.
+questions or problems, post them to the list.  The list address is:
 
 bonding-devel@lists.sourceforge.net
 
+	The administrative interface (to subscribe or unsubscribe) can
+be found at:
+
 https://lists.sourceforge.net/lists/listinfo/bonding-devel
 
-There is also a project site on sourceforge.
-
-http://www.sourceforge.net/projects/bonding
-
 Donald Becker's Ethernet Drivers and diag programs may be found at :
  - http://www.scyld.com/network/
 
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 59ccc63..403e7b4 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -56,3 +56,12 @@
    memory regions in-use. The name argument should be a pointer to
    your driver name. Eg, for pcnet_cs, name should point to the
    string "pcnet_cs".
+
+* CardServices is gone
+  CardServices() in 2.4 is just a big switch statement to call various
+  services.  In 2.6, all of those entry points are exported and called
+  directly (except for pcmcia_report_error(), just use cs_error() instead).
+
+* struct pcmcia_driver
+  You need to use struct pcmcia_driver and pcmcia_{un,}register_driver
+  instead of {un,}register_pccard_driver
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 104a994..a18ecb9 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -636,11 +636,16 @@
 	  3stack-digout	3-jack in back, a HP out and a SPDIF out
 	  5stack	5-jack in back, 2-jack in front
 	  5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
+	  6stack	6-jack in back, 2-jack in front
+	  6stack-digout	6-jack with a SPDIF out
 	  w810		3-jack
 	  z71v		3-jack (HP shared SPDIF)
 	  asus		3-jack
 	  uniwill	3-jack
 	  F1734		2-jack
+	  test		for testing/debugging purpose, almost all controls can be
+			adjusted.  Appearing only when compiled with
+			$CONFIG_SND_DEBUG=y
 
 	CMI9880
 	  minimal	3-jack in back
@@ -1054,6 +1059,13 @@
 
     The power-management is supported.
 
+  Module snd-pxa2xx-ac97 (on arm only)
+  ------------------------------------
+
+    Module for AC97 driver for the Intel PXA2xx chip
+
+    For ARM architecture only.
+
   Module snd-rme32
   ----------------
 
@@ -1173,6 +1185,13 @@
 
     Module supports up to 8 cards.
 
+  Module snd-sun-dbri (on sparc only)
+  -----------------------------------
+
+    Module for DBRI sound chips found on Sparcs.
+
+    Module supports up to 8 cards.
+
   Module snd-wavefront
   --------------------
 
@@ -1371,7 +1390,7 @@
   Module snd-vxpocket
   -------------------
 
-    Module for Digigram VX-Pocket VX2 PCMCIA card.
+    Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
 
     ibl      - Capture IBL size. (default = 0, minimum size)
 
@@ -1391,29 +1410,6 @@
 
     Note: the driver is build only when CONFIG_ISA is set.
     
-  Module snd-vxp440
-  -----------------
-
-    Module for Digigram VX-Pocket 440 PCMCIA card.
-
-    ibl      - Capture IBL size. (default = 0, minimum size)
-
-    Module supports up to 8 cards.  The module is compiled only when
-    PCMCIA is supported on kernel.
-
-    To activate the driver via the card manager, you'll need to set
-    up /etc/pcmcia/vxp440.conf.  See the sound/pcmcia/vx/vxp440.c.
-
-    When the driver is compiled as a module and the hotplug firmware
-    is supported, the firmware data is loaded via hotplug automatically.
-    Install the necessary firmware files in alsa-firmware package.
-    When no hotplug fw loader is available, you need to load the
-    firmware via vxloader utility in alsa-tools package.
-
-    About capture IBL, see the description of snd-vx222 module.
-
-    Note: the driver is build only when CONFIG_ISA is set.
-    
   Module snd-ymfpci
   -----------------
 
diff --git a/Documentation/stable_api_nonsense.txt b/Documentation/stable_api_nonsense.txt
index 3cea138..f39c9d7 100644
--- a/Documentation/stable_api_nonsense.txt
+++ b/Documentation/stable_api_nonsense.txt
@@ -132,7 +132,7 @@
 their work on their own time, asking programmers to do extra work for no
 gain, for free, is not a possibility.
 
-Security issues are also a very important for Linux.  When a
+Security issues are also very important for Linux.  When a
 security issue is found, it is fixed in a very short amount of time.  A
 number of times this has caused internal kernel interfaces to be
 reworked to prevent the security problem from occurring.  When this
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
new file mode 100644
index 0000000..2c81305
--- /dev/null
+++ b/Documentation/stable_kernel_rules.txt
@@ -0,0 +1,58 @@
+Everything you ever wanted to know about Linux 2.6 -stable releases.
+
+Rules on what kind of patches are accepted, and what ones are not, into
+the "-stable" tree:
+
+ - It must be obviously correct and tested.
+ - It can not bigger than 100 lines, with context.
+ - It must fix only one thing.
+ - It must fix a real bug that bothers people (not a, "This could be a
+   problem..." type thing.)
+ - It must fix a problem that causes a build error (but not for things
+   marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
+   security issue, or some "oh, that's not good" issue.  In short,
+   something critical.
+ - No "theoretical race condition" issues, unless an explanation of how
+   the race can be exploited.
+ - It can not contain any "trivial" fixes in it (spelling changes,
+   whitespace cleanups, etc.)
+ - It must be accepted by the relevant subsystem maintainer.
+ - It must follow Documentation/SubmittingPatches rules.
+
+
+Procedure for submitting patches to the -stable tree:
+
+ - Send the patch, after verifying that it follows the above rules, to
+   stable@kernel.org.
+ - The sender will receive an ack when the patch has been accepted into
+   the queue, or a nak if the patch is rejected.  This response might
+   take a few days, according to the developer's schedules.
+ - If accepted, the patch will be added to the -stable queue, for review
+   by other developers.
+ - Security patches should not be sent to this alias, but instead to the
+   documented security@kernel.org.
+
+
+Review cycle:
+
+ - When the -stable maintainers decide for a review cycle, the patches
+   will be sent to the review committee, and the maintainer of the
+   affected area of the patch (unless the submitter is the maintainer of
+   the area) and CC: to the linux-kernel mailing list.
+ - The review committee has 48 hours in which to ack or nak the patch.
+ - If the patch is rejected by a member of the committee, or linux-kernel
+   members object to the patch, bringing up issues that the maintainers
+   and members did not realize, the patch will be dropped from the
+   queue.
+ - At the end of the review cycle, the acked patches will be added to
+   the latest -stable release, and a new -stable release will happen.
+ - Security patches will be accepted into the -stable tree directly from
+   the security kernel team, and not go through the normal review cycle.
+   Contact the kernel security team for more details on this procedure.
+
+
+Review committe:
+
+ - This will be made up of a number of kernel developers who have
+   volunteered for this task, and a few that haven't.
+
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 6d44958..03deb07 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -29,3 +29,4 @@
 card=28 - DViCO FusionHDTV 3 Gold-T
 card=29 - ADS Tech Instant TV DVB-T PCI
 card=30 - TerraTec Cinergy 1400 DVB-T
+card=31 - DViCO FusionHDTV 5 Gold
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index d1b9d21..f3302e1 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -62,3 +62,5 @@
 tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
 tuner=62 - Philips TEA5767HN FM Radio
 tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
+tuner=64 - LG TDVS-H062F/TUA6034
+tuner=65 - Ymec TVF66T5-B/DFF
diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options
index 7bb5a50..fc94ff2 100644
--- a/Documentation/video4linux/bttv/Insmod-options
+++ b/Documentation/video4linux/bttv/Insmod-options
@@ -44,6 +44,9 @@
 				push used by bttv.  bttv will disable overlay
 				by default on this hardware to avoid crashes.
 				With this insmod option you can override this.
+		no_overlay=1	Disable overlay. It should be used by broken
+				hardware that doesn't support PCI2PCI direct
+				transfers.
 		automute=0/1	Automatically mutes the sound if there is
 				no TV signal, on by default.  You might try
 				to disable this if you have bad input signal
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index b9e6be0..476c0c2 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -47,7 +47,7 @@
   notsc
   Don't use the CPU time stamp counter to read the wall time.
   This can be used to work around timing problems on multiprocessor systems
-  with not properly synchronized CPUs. Only useful with a SMP kernel
+  with not properly synchronized CPUs.
 
   report_lost_ticks
   Report when timer interrupts are lost because some code turned off
@@ -74,6 +74,9 @@
   event. This will make the CPUs eat a lot more power, but may be useful
   to get slightly better performance in multiprocessor benchmarks. It also
   makes some profiling using performance counters more accurate.
+  Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+  CPUs) this option has no performance advantage over the normal idle loop.
+  It may also interact badly with hyperthreading.
 
 Rebooting
 
@@ -178,6 +181,5 @@
 Misc
 
   noreplacement  Don't replace instructions with more appropiate ones
-  				 for the CPU. This may be useful on asymmetric MP systems
-				 where some CPU have less capabilities than the others.
-
+		 for the CPU. This may be useful on asymmetric MP systems
+		 where some CPU have less capabilities than the others.
diff --git a/MAINTAINERS b/MAINTAINERS
index ec8433c..c31ddc4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1521,6 +1521,12 @@
 M:	zab@zabbo.net
 S:	Odd Fixes
 
+MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
+P: Michael Kerrisk
+M: mtk-manpages@gmx.net
+W: ftp://ftp.kernel.org/pub/linux/docs/manpages
+S: Maintained
+
 MARVELL MV64340 ETHERNET DRIVER
 P:	Manish Lachwani
 M:	Manish_Lachwani@pmc-sierra.com
diff --git a/Makefile b/Makefile
index cf34a6b..0196b20 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc3
+EXTRAVERSION =-rc5
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 295e0a8..b208573 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -176,6 +176,7 @@
 	cpu_set(cpu, mm->cpu_vm_mask);
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	cpu_init();
 
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 5382a30..2036ff1 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -7,7 +7,7 @@
 1:	ldrexb	r2, [r1]
 	\instr	r2, r2, r3
 	strexb	r0, r2, [r1]
-	cmpne	r0, #0
+	cmp	r0, #0
 	bne	1b
 	mov	pc, lr
 	.endm
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
index aecf47b..ea10bd8 100644
--- a/arch/arm/mach-integrator/platsmp.c
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/procinfo.h>
@@ -80,6 +81,7 @@
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu;
+	flush_cache_all();
 
 	/*
 	 * XXX
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 4ff4393..7f58afb 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -61,7 +61,7 @@
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 8ba1cd9..65e356b 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -83,7 +83,7 @@
 	.mapbase	= IXP4XX_UART2_BASE_PHYS,
 	.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 	.irq		= IRQ_IXP4XX_UART2,
-	.flags		= UPF_BOOT_AUTOCONF,
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	.iotype		= UPIO_MEM,
 	.regshift	= 2,
 	.uartclk	= IXP4XX_UART_XTAL,
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index c2ba759..4633470 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -82,7 +82,7 @@
 		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
@@ -91,7 +91,7 @@
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e7f343..e918224 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -30,6 +30,7 @@
  *     28-Jun-2005 BJD  Moved pm functionality out to common code
  *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
  *     25-Jul-2005 BJD  Removed ASIX static mappings
+ *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
 */
 
 #include <linux/kernel.h>
@@ -60,6 +61,7 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/nand.h>
+#include <asm/arch/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -304,7 +306,7 @@
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-	.tacls		= 80,
+	.tacls		= 40,
 	.twrph0		= 80,
 	.twrph1		= 80,
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
@@ -385,6 +387,17 @@
 	},
 };
 
+/* we have devices on the bus which cannot work much over the
+ * standard 100KHz i2c bus frequency
+*/
+
+static struct s3c2410_platform_i2c bast_i2c_info = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 130*1000,
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -431,6 +444,7 @@
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
+	s3c_device_i2c.dev.platform_data = &bast_i2c_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index eee3cbc..2f49711 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -97,6 +97,7 @@
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
+	/* Maintainer: Michael Gernoth <michael@gernoth.net> */
 	.phys_ram	= 0xc0000000,
 	.phys_io	= 0x80000000,
 	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 65bfe84..0b6c4db 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -238,9 +238,9 @@
 	up_read(&mm->mmap_sem);
 
 	/*
-	 * Handle the "normal" case first
+	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
 	 */
-	if (fault > 0)
+	if (fault >= VM_FAULT_MINOR)
 		return 0;
 
 	/*
@@ -261,7 +261,7 @@
 		do_exit(SIGKILL);
 		return 0;
 
-	case 0:
+	case VM_FAULT_SIGBUS:
 		/*
 		 * We had some memory, but were unable to
 		 * successfully fix up this page fault.
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2d977b4..b88de27 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -370,142 +370,6 @@
 	bhi	1b
 	mov	pc, lr
 
-/* ================================ CACHE LOCKING============================
- *
- * The XScale MicroArchitecture implements support for locking entries into
- * the data and instruction cache.  The following functions implement the core
- * low level instructions needed to accomplish the locking.  The developer's
- * manual states that the code that performs the locking must be in non-cached
- * memory.  To accomplish this, the code in xscale-cache-lock.c copies the
- * following functions from the cache into a non-cached memory region that
- * is allocated through consistent_alloc().
- *
- */
-	.align	5
-/*
- * xscale_icache_lock
- *
- * r0: starting address to lock
- * r1: end address to lock
- */
-ENTRY(xscale_icache_lock)
-
-iLockLoop:
-	bic	r0, r0, #CACHELINESIZE - 1
-	mcr	p15, 0, r0, c9, c1, 0	@ lock into cache
-	cmp	r0, r1			@ are we done?
-	add	r0, r0, #CACHELINESIZE	@ advance to next cache line
-	bls	iLockLoop
-	mov	pc, lr
-
-/*
- * xscale_icache_unlock
- */
-ENTRY(xscale_icache_unlock)
-	mcr	p15, 0, r0, c9, c1, 1	@ Unlock icache
-	mov	pc, lr
-
-/*
- * xscale_dcache_lock
- *
- * r0: starting address to lock
- * r1: end address to lock
- */
-ENTRY(xscale_dcache_lock)
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	r2, #1
-	mcr	p15, 0, r2, c9, c2, 0	@ Put dcache in lock mode
-	cpwait	ip			@ Wait for completion
-
-	mrs	r2, cpsr
-	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
-dLockLoop:
-	msr	cpsr_c, r3
-	mcr	p15, 0, r0, c7, c10, 1	@ Write back line if it is dirty
-	mcr	p15, 0, r0, c7, c6, 1	@ Flush/invalidate line
-	msr	cpsr_c, r2
-	ldr	ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
-					@ location [r0]. Post-increment
-					@ r3 to next cache line
-	cmp	r0, r1			@ Are we done?
-	bls	dLockLoop
-
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	r2, #0
-	mcr	p15, 0, r2, c9, c2, 0	@ Get out of lock mode
-	cpwait_ret lr, ip
-
-/*
- * xscale_dcache_unlock
- */
-ENTRY(xscale_dcache_unlock)
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mcr	p15, 0, ip, c9, c2, 1	@ Unlock cache
-	mov	pc, lr
-
-/*
- * Needed to determine the length of the code that needs to be copied.
- */
-	.align	5
-ENTRY(xscale_cache_dummy)
-	mov	pc, lr
-
-/* ================================ TLB LOCKING==============================
- *
- * The XScale MicroArchitecture implements support for locking entries into
- * the Instruction and Data TLBs.  The following functions provide the
- * low level support for supporting these under Linux.  xscale-lock.c
- * implements some higher level management code.  Most of the following
- * is taken straight out of the Developer's Manual.
- */
-
-/*
- * Lock I-TLB entry
- *
- * r0: Virtual address to translate and lock
- */
-	.align	5
-ENTRY(xscale_itlb_lock)
-	mrs	r2, cpsr
-	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
-	msr	cpsr_c, r3			@ Disable interrupts
-	mcr	p15, 0, r0, c8, c5, 1		@ Invalidate I-TLB entry
-	mcr	p15, 0, r0, c10, c4, 0		@ Translate and lock
-	msr	cpsr_c, r2			@ Restore interrupts
-	cpwait_ret lr, ip
-
-/*
- * Lock D-TLB entry
- *
- * r0: Virtual address to translate and lock
- */
-	.align	5
-ENTRY(xscale_dtlb_lock)
-	mrs	r2, cpsr
-	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
-	msr	cpsr_c, r3			@ Disable interrupts
-	mcr	p15, 0, r0, c8, c6, 1		@ Invalidate D-TLB entry
-	mcr	p15, 0, r0, c10, c8, 0		@ Translate and lock
-	msr	cpsr_c, r2			@ Restore interrupts
-	cpwait_ret lr, ip
-
-/*
- * Unlock all I-TLB entries
- */
-	.align	5
-ENTRY(xscale_itlb_unlock)
-	mcr	p15, 0, ip, c10, c4, 1		@ Unlock I-TLB
-	mcr	p15, 0, ip, c8, c5, 0		@ Invalidate I-TLB
-	cpwait_ret lr, ip
-
-/*
- * Unlock all D-TLB entries
- */
-ENTRY(xscale_dtlb_unlock)
-	mcr	p15, 0, ip, c10, c8, 1		@ Unlock D-TBL
-	mcr	p15, 0, ip, c8, c6, 0		@ Invalidate D-TLB
-	cpwait_ret lr, ip
-
 /* =============================== PageTable ============================== */
 
 #define PTE_CACHE_WRITE_ALLOCATE 0
diff --git a/arch/arm/nwfpe/double_cpdo.c b/arch/arm/nwfpe/double_cpdo.c
index 7ffd8cb..c51d138 100644
--- a/arch/arm/nwfpe/double_cpdo.c
+++ b/arch/arm/nwfpe/double_cpdo.c
@@ -40,17 +40,17 @@
 float64 float64_pow(float64 rFn, float64 rFm);
 float64 float64_pol(float64 rFn, float64 rFm);
 
-static float64 float64_rsf(float64 rFn, float64 rFm)
+static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm)
 {
-	return float64_sub(rFm, rFn);
+	return float64_sub(roundData, rFm, rFn);
 }
 
-static float64 float64_rdv(float64 rFn, float64 rFm)
+static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm)
 {
-	return float64_div(rFm, rFn);
+	return float64_div(roundData, rFm, rFn);
 }
 
-static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = {
+static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = {
 	[ADF_CODE >> 20] = float64_add,
 	[MUF_CODE >> 20] = float64_mul,
 	[SUF_CODE >> 20] = float64_sub,
@@ -65,12 +65,12 @@
 	[FRD_CODE >> 20] = float64_rdv,
 };
 
-static float64 float64_mvf(float64 rFm)
+static float64 float64_mvf(struct roundingData *roundData,float64 rFm)
 {
 	return rFm;
 }
 
-static float64 float64_mnf(float64 rFm)
+static float64 float64_mnf(struct roundingData *roundData,float64 rFm)
 {
 	union float64_components u;
 
@@ -84,7 +84,7 @@
 	return u.f64;
 }
 
-static float64 float64_abs(float64 rFm)
+static float64 float64_abs(struct roundingData *roundData,float64 rFm)
 {
 	union float64_components u;
 
@@ -98,7 +98,7 @@
 	return u.f64;
 }
 
-static float64 (*const monadic_double[16])(float64 rFm) = {
+static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = {
 	[MVF_CODE >> 20] = float64_mvf,
 	[MNF_CODE >> 20] = float64_mnf,
 	[ABS_CODE >> 20] = float64_abs,
@@ -108,7 +108,7 @@
 	[NRM_CODE >> 20] = float64_mvf,
 };
 
-unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd)
+unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	float64 rFm;
@@ -151,13 +151,13 @@
 		}
 
 		if (dyadic_double[opc_mask_shift]) {
-			rFd->fDouble = dyadic_double[opc_mask_shift](rFn, rFm);
+			rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm);
 		} else {
 			return 0;
 		}
 	} else {
 		if (monadic_double[opc_mask_shift]) {
-			rFd->fDouble = monadic_double[opc_mask_shift](rFm);
+			rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm);
 		} else {
 			return 0;
 		}
diff --git a/arch/arm/nwfpe/extended_cpdo.c b/arch/arm/nwfpe/extended_cpdo.c
index c39f68a..65a279b 100644
--- a/arch/arm/nwfpe/extended_cpdo.c
+++ b/arch/arm/nwfpe/extended_cpdo.c
@@ -35,17 +35,17 @@
 floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm);
 floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm);
 
-static floatx80 floatx80_rsf(floatx80 rFn, floatx80 rFm)
+static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
 {
-	return floatx80_sub(rFm, rFn);
+	return floatx80_sub(roundData, rFm, rFn);
 }
 
-static floatx80 floatx80_rdv(floatx80 rFn, floatx80 rFm)
+static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
 {
-	return floatx80_div(rFm, rFn);
+	return floatx80_div(roundData, rFm, rFn);
 }
 
-static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = {
+static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = {
 	[ADF_CODE >> 20] = floatx80_add,
 	[MUF_CODE >> 20] = floatx80_mul,
 	[SUF_CODE >> 20] = floatx80_sub,
@@ -60,24 +60,24 @@
 	[FRD_CODE >> 20] = floatx80_rdv,
 };
 
-static floatx80 floatx80_mvf(floatx80 rFm)
+static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm)
 {
 	return rFm;
 }
 
-static floatx80 floatx80_mnf(floatx80 rFm)
+static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm)
 {
 	rFm.high ^= 0x8000;
 	return rFm;
 }
 
-static floatx80 floatx80_abs(floatx80 rFm)
+static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm)
 {
 	rFm.high &= 0x7fff;
 	return rFm;
 }
 
-static floatx80 (*const monadic_extended[16])(floatx80 rFm) = {
+static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = {
 	[MVF_CODE >> 20] = floatx80_mvf,
 	[MNF_CODE >> 20] = floatx80_mnf,
 	[ABS_CODE >> 20] = floatx80_abs,
@@ -87,7 +87,7 @@
 	[NRM_CODE >> 20] = floatx80_mvf,
 };
 
-unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd)
+unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	floatx80 rFm;
@@ -138,13 +138,13 @@
 		}
 
 		if (dyadic_extended[opc_mask_shift]) {
-			rFd->fExtended = dyadic_extended[opc_mask_shift](rFn, rFm);
+			rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm);
 		} else {
 			return 0;
 		}
 	} else {
 		if (monadic_extended[opc_mask_shift]) {
-			rFd->fExtended = monadic_extended[opc_mask_shift](rFm);
+			rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm);
 		} else {
 			return 0;
 		}
diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c
index bf61696..7690f73 100644
--- a/arch/arm/nwfpe/fpa11.c
+++ b/arch/arm/nwfpe/fpa11.c
@@ -51,48 +51,42 @@
 	fpa11->fpsr = FP_EMULATOR | BIT_AC;
 }
 
-void SetRoundingMode(const unsigned int opcode)
+int8 SetRoundingMode(const unsigned int opcode)
 {
 	switch (opcode & MASK_ROUNDING_MODE) {
 	default:
 	case ROUND_TO_NEAREST:
-		float_rounding_mode = float_round_nearest_even;
-		break;
+		return float_round_nearest_even;
 
 	case ROUND_TO_PLUS_INFINITY:
-		float_rounding_mode = float_round_up;
-		break;
+		return float_round_up;
 
 	case ROUND_TO_MINUS_INFINITY:
-		float_rounding_mode = float_round_down;
-		break;
+		return float_round_down;
 
 	case ROUND_TO_ZERO:
-		float_rounding_mode = float_round_to_zero;
-		break;
+		return float_round_to_zero;
 	}
 }
 
-void SetRoundingPrecision(const unsigned int opcode)
+int8 SetRoundingPrecision(const unsigned int opcode)
 {
 #ifdef CONFIG_FPE_NWFPE_XP
 	switch (opcode & MASK_ROUNDING_PRECISION) {
 	case ROUND_SINGLE:
-		floatx80_rounding_precision = 32;
-		break;
+		return 32;
 
 	case ROUND_DOUBLE:
-		floatx80_rounding_precision = 64;
-		break;
+		return 64;
 
 	case ROUND_EXTENDED:
-		floatx80_rounding_precision = 80;
-		break;
+		return 80;
 
 	default:
-		floatx80_rounding_precision = 80;
+		return 80;
 	}
 #endif
+	return 80;
 }
 
 void nwfpe_init_fpa(union fp_state *fp)
@@ -103,8 +97,6 @@
 #endif
  	memset(fpa11, 0, sizeof(FPA11));
 	resetFPA11();
-	SetRoundingMode(ROUND_TO_NEAREST);
-	SetRoundingPrecision(ROUND_EXTENDED);
 	fpa11->initflag = 1;
 }
 
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index e4a61ae..93523ae 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -37,6 +37,13 @@
 /* includes */
 #include "fpsr.h"		/* FP control and status register definitions */
 #include "milieu.h"
+
+struct roundingData {
+    int8 mode;
+    int8 precision;
+    signed char exception;
+};
+
 #include "softfloat.h"
 
 #define		typeNone		0x00
@@ -84,8 +91,8 @@
 				   initialised. */
 } FPA11;
 
-extern void SetRoundingMode(const unsigned int);
-extern void SetRoundingPrecision(const unsigned int);
+extern int8 SetRoundingMode(const unsigned int);
+extern int8 SetRoundingPrecision(const unsigned int);
 extern void nwfpe_init_fpa(union fp_state *fp);
 
 #endif
diff --git a/arch/arm/nwfpe/fpa11_cpdo.c b/arch/arm/nwfpe/fpa11_cpdo.c
index 1bea674..4a31dfd 100644
--- a/arch/arm/nwfpe/fpa11_cpdo.c
+++ b/arch/arm/nwfpe/fpa11_cpdo.c
@@ -24,15 +24,16 @@
 #include "fpa11.h"
 #include "fpopcode.h"
 
-unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd);
-unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd);
-unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd);
+unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
 
 unsigned int EmulateCPDO(const unsigned int opcode)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	FPREG *rFd;
 	unsigned int nType, nDest, nRc;
+	struct roundingData roundData;
 
 	/* Get the destination size.  If not valid let Linux perform
 	   an invalid instruction trap. */
@@ -40,7 +41,9 @@
 	if (typeNone == nDest)
 		return 0;
 
-	SetRoundingMode(opcode);
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	/* Compare the size of the operands in Fn and Fm.
 	   Choose the largest size and perform operations in that size,
@@ -63,14 +66,14 @@
 
 	switch (nType) {
 	case typeSingle:
-		nRc = SingleCPDO(opcode, rFd);
+		nRc = SingleCPDO(&roundData, opcode, rFd);
 		break;
 	case typeDouble:
-		nRc = DoubleCPDO(opcode, rFd);
+		nRc = DoubleCPDO(&roundData, opcode, rFd);
 		break;
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
-		nRc = ExtendedCPDO(opcode, rFd);
+		nRc = ExtendedCPDO(&roundData, opcode, rFd);
 		break;
 #endif
 	default:
@@ -93,9 +96,9 @@
 			case typeSingle:
 				{
 					if (typeDouble == nType)
-						rFd->fSingle = float64_to_float32(rFd->fDouble);
+						rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
 					else
-						rFd->fSingle = floatx80_to_float32(rFd->fExtended);
+						rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended);
 				}
 				break;
 
@@ -104,7 +107,7 @@
 					if (typeSingle == nType)
 						rFd->fDouble = float32_to_float64(rFd->fSingle);
 					else
-						rFd->fDouble = floatx80_to_float64(rFd->fExtended);
+						rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended);
 				}
 				break;
 
@@ -121,12 +124,15 @@
 #else
 		if (nDest != nType) {
 			if (nDest == typeSingle)
-				rFd->fSingle = float64_to_float32(rFd->fDouble);
+				rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
 			else
 				rFd->fDouble = float32_to_float64(rFd->fSingle);
 		}
 #endif
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	return nRc;
 }
diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c
index 95fb63f..b0db5cb 100644
--- a/arch/arm/nwfpe/fpa11_cpdt.c
+++ b/arch/arm/nwfpe/fpa11_cpdt.c
@@ -96,7 +96,7 @@
 	}
 }
 
-static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
+static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	union {
@@ -106,12 +106,12 @@
 
 	switch (fpa11->fType[Fn]) {
 	case typeDouble:
-		val.f = float64_to_float32(fpa11->fpreg[Fn].fDouble);
+		val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble);
 		break;
 
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
-		val.f = floatx80_to_float32(fpa11->fpreg[Fn].fExtended);
+		val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended);
 		break;
 #endif
 
@@ -122,7 +122,7 @@
 	put_user(val.i[0], pMem);
 }
 
-static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem)
+static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	union {
@@ -137,7 +137,7 @@
 
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
-		val.f = floatx80_to_float64(fpa11->fpreg[Fn].fExtended);
+		val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended);
 		break;
 #endif
 
@@ -259,8 +259,11 @@
 {
 	unsigned int __user *pBase, *pAddress, *pFinal;
 	unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
+	struct roundingData roundData;
 
-	SetRoundingMode(ROUND_TO_NEAREST);
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	pBase = (unsigned int __user *) readRegister(getRn(opcode));
 	if (REG_PC == getRn(opcode)) {
@@ -281,10 +284,10 @@
 
 	switch (opcode & MASK_TRANSFER_LENGTH) {
 	case TRANSFER_SINGLE:
-		storeSingle(getFd(opcode), pAddress);
+		storeSingle(&roundData, getFd(opcode), pAddress);
 		break;
 	case TRANSFER_DOUBLE:
-		storeDouble(getFd(opcode), pAddress);
+		storeDouble(&roundData, getFd(opcode), pAddress);
 		break;
 #ifdef CONFIG_FPE_NWFPE_XP
 	case TRANSFER_EXTENDED:
@@ -295,6 +298,9 @@
 		nRc = 0;
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	if (write_back)
 		writeRegister(getRn(opcode), (unsigned long) pFinal);
 	return nRc;
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index db01fbc..adf8d30 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -33,8 +33,6 @@
 extern flag float64_is_nan(float64);
 extern flag float32_is_nan(float32);
 
-void SetRoundingMode(const unsigned int opcode);
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 
@@ -77,14 +75,17 @@
 unsigned int PerformFLT(const unsigned int opcode)
 {
 	FPA11 *fpa11 = GET_FPA11();
-	SetRoundingMode(opcode);
-	SetRoundingPrecision(opcode);
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	switch (opcode & MASK_ROUNDING_PRECISION) {
 	case ROUND_SINGLE:
 		{
 			fpa11->fType[getFn(opcode)] = typeSingle;
-			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(readRegister(getRd(opcode)));
+			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
 		}
 		break;
 
@@ -108,6 +109,9 @@
 		return 0;
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	return 1;
 }
 
@@ -115,26 +119,29 @@
 {
 	FPA11 *fpa11 = GET_FPA11();
 	unsigned int Fn = getFm(opcode);
+	struct roundingData roundData;
 
-	SetRoundingMode(opcode);
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	switch (fpa11->fType[Fn]) {
 	case typeSingle:
 		{
-			writeRegister(getRd(opcode), float32_to_int32(fpa11->fpreg[Fn].fSingle));
+			writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
 		}
 		break;
 
 	case typeDouble:
 		{
-			writeRegister(getRd(opcode), float64_to_int32(fpa11->fpreg[Fn].fDouble));
+			writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
 		}
 		break;
 
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
 		{
-			writeRegister(getRd(opcode), floatx80_to_int32(fpa11->fpreg[Fn].fExtended));
+			writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
 		}
 		break;
 #endif
@@ -143,6 +150,9 @@
 		return 0;
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	return 1;
 }
 
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index 12885f3..2dfe1ac 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -116,8 +116,6 @@
 code to access data in user space in some other source files at the 
 moment (grep for get_user / put_user calls).  --philb]
 
-float_exception_flags is a global variable in SoftFloat.
-
 This function is called by the SoftFloat routines to raise a floating
 point exception.  We check the trap enable byte in the FPSR, and raise
 a SIGFPE exception if necessary.  If not the relevant bits in the 
@@ -129,15 +127,14 @@
 	register unsigned int fpsr, cumulativeTraps;
 
 #ifdef CONFIG_DEBUG_USER
-	printk(KERN_DEBUG
-	       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
-	       current->comm, current->pid, flags,
-	       __builtin_return_address(0), GET_USERREG()->ARM_pc);
+ 	/* Ignore inexact errors as there are far too many of them to log */
+ 	if (flags & ~BIT_IXC)
+ 		printk(KERN_DEBUG
+		       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
+		       current->comm, current->pid, flags,
+		       __builtin_return_address(0), GET_USERREG()->ARM_pc);
 #endif
 
-	/* Keep SoftFloat exception flags up to date.  */
-	float_exception_flags |= flags;
-
 	/* Read fpsr and initialize the cumulativeTraps.  */
 	fpsr = readFPSR();
 	cumulativeTraps = 0;
diff --git a/arch/arm/nwfpe/single_cpdo.c b/arch/arm/nwfpe/single_cpdo.c
index 705808e..c66981d 100644
--- a/arch/arm/nwfpe/single_cpdo.c
+++ b/arch/arm/nwfpe/single_cpdo.c
@@ -36,17 +36,17 @@
 float32 float32_pow(float32 rFn, float32 rFm);
 float32 float32_pol(float32 rFn, float32 rFm);
 
-static float32 float32_rsf(float32 rFn, float32 rFm)
+static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm)
 {
-	return float32_sub(rFm, rFn);
+	return float32_sub(roundData, rFm, rFn);
 }
 
-static float32 float32_rdv(float32 rFn, float32 rFm)
+static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm)
 {
-	return float32_div(rFm, rFn);
+	return float32_div(roundData, rFm, rFn);
 }
 
-static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = {
+static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = {
 	[ADF_CODE >> 20] = float32_add,
 	[MUF_CODE >> 20] = float32_mul,
 	[SUF_CODE >> 20] = float32_sub,
@@ -60,22 +60,22 @@
 	[FRD_CODE >> 20] = float32_rdv,
 };
 
-static float32 float32_mvf(float32 rFm)
+static float32 float32_mvf(struct roundingData *roundData, float32 rFm)
 {
 	return rFm;
 }
 
-static float32 float32_mnf(float32 rFm)
+static float32 float32_mnf(struct roundingData *roundData, float32 rFm)
 {
 	return rFm ^ 0x80000000;
 }
 
-static float32 float32_abs(float32 rFm)
+static float32 float32_abs(struct roundingData *roundData, float32 rFm)
 {
 	return rFm & 0x7fffffff;
 }
 
-static float32 (*const monadic_single[16])(float32 rFm) = {
+static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = {
 	[MVF_CODE >> 20] = float32_mvf,
 	[MNF_CODE >> 20] = float32_mnf,
 	[ABS_CODE >> 20] = float32_abs,
@@ -85,7 +85,7 @@
 	[NRM_CODE >> 20] = float32_mvf,
 };
 
-unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd)
+unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	float32 rFm;
@@ -108,13 +108,13 @@
 		if (fpa11->fType[Fn] == typeSingle &&
 		    dyadic_single[opc_mask_shift]) {
 			rFn = fpa11->fpreg[Fn].fSingle;
-			rFd->fSingle = dyadic_single[opc_mask_shift](rFn, rFm);
+			rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm);
 		} else {
 			return 0;
 		}
 	} else {
 		if (monadic_single[opc_mask_shift]) {
-			rFd->fSingle = monadic_single[opc_mask_shift](rFm);
+			rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm);
 		} else {
 			return 0;
 		}
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
index e038dd3..8b75a6e 100644
--- a/arch/arm/nwfpe/softfloat.c
+++ b/arch/arm/nwfpe/softfloat.c
@@ -36,16 +36,6 @@
 
 /*
 -------------------------------------------------------------------------------
-Floating-point rounding mode, extended double-precision rounding precision,
-and exception flags.
--------------------------------------------------------------------------------
-*/
-int8 float_rounding_mode = float_round_nearest_even;
-int8 floatx80_rounding_precision = 80;
-int8 float_exception_flags;
-
-/*
--------------------------------------------------------------------------------
 Primitive arithmetic functions, including multi-word arithmetic, and
 division and square root approximations.  (Can be specialized to target if
 desired.)
@@ -77,14 +67,14 @@
 positive or negative integer is returned.
 -------------------------------------------------------------------------------
 */
-static int32 roundAndPackInt32( flag zSign, bits64 absZ )
+static int32 roundAndPackInt32( struct roundingData *roundData, flag zSign, bits64 absZ )
 {
     int8 roundingMode;
     flag roundNearestEven;
     int8 roundIncrement, roundBits;
     int32 z;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     roundIncrement = 0x40;
     if ( ! roundNearestEven ) {
@@ -107,10 +97,10 @@
     z = absZ;
     if ( zSign ) z = - z;
     if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) {
-        float_exception_flags |= float_flag_invalid;
+        roundData->exception |= float_flag_invalid;
         return zSign ? 0x80000000 : 0x7FFFFFFF;
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -224,14 +214,14 @@
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig )
+static float32 roundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
 {
     int8 roundingMode;
     flag roundNearestEven;
     int8 roundIncrement, roundBits;
     flag isTiny;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     roundIncrement = 0x40;
     if ( ! roundNearestEven ) {
@@ -254,7 +244,7 @@
              || (    ( zExp == 0xFD )
                   && ( (sbits32) ( zSig + roundIncrement ) < 0 ) )
            ) {
-            float_raise( float_flag_overflow | float_flag_inexact );
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
             return packFloat32( zSign, 0xFF, 0 ) - ( roundIncrement == 0 );
         }
         if ( zExp < 0 ) {
@@ -265,10 +255,10 @@
             shift32RightJamming( zSig, - zExp, &zSig );
             zExp = 0;
             roundBits = zSig & 0x7F;
-            if ( isTiny && roundBits ) float_raise( float_flag_underflow );
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
         }
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     zSig = ( zSig + roundIncrement )>>7;
     zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
     if ( zSig == 0 ) zExp = 0;
@@ -287,12 +277,12 @@
 -------------------------------------------------------------------------------
 */
 static float32
- normalizeRoundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig )
+ normalizeRoundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
 {
     int8 shiftCount;
 
     shiftCount = countLeadingZeros32( zSig ) - 1;
-    return roundAndPackFloat32( zSign, zExp - shiftCount, zSig<<shiftCount );
+    return roundAndPackFloat32( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
 
 }
 
@@ -395,14 +385,14 @@
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig )
+static float64 roundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
 {
     int8 roundingMode;
     flag roundNearestEven;
     int16 roundIncrement, roundBits;
     flag isTiny;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     roundIncrement = 0x200;
     if ( ! roundNearestEven ) {
@@ -427,7 +417,7 @@
            ) {
             //register int lr = __builtin_return_address(0);
             //printk("roundAndPackFloat64 called from 0x%08x\n",lr);
-            float_raise( float_flag_overflow | float_flag_inexact );
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
             return packFloat64( zSign, 0x7FF, 0 ) - ( roundIncrement == 0 );
         }
         if ( zExp < 0 ) {
@@ -438,10 +428,10 @@
             shift64RightJamming( zSig, - zExp, &zSig );
             zExp = 0;
             roundBits = zSig & 0x3FF;
-            if ( isTiny && roundBits ) float_raise( float_flag_underflow );
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
         }
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     zSig = ( zSig + roundIncrement )>>10;
     zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven );
     if ( zSig == 0 ) zExp = 0;
@@ -460,12 +450,12 @@
 -------------------------------------------------------------------------------
 */
 static float64
- normalizeRoundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig )
+ normalizeRoundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
 {
     int8 shiftCount;
 
     shiftCount = countLeadingZeros64( zSig ) - 1;
-    return roundAndPackFloat64( zSign, zExp - shiftCount, zSig<<shiftCount );
+    return roundAndPackFloat64( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
 
 }
 
@@ -572,14 +562,15 @@
 */
 static floatx80
  roundAndPackFloatx80(
-     int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
+     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
  )
 {
-    int8 roundingMode;
+    int8 roundingMode, roundingPrecision;
     flag roundNearestEven, increment, isTiny;
     int64 roundIncrement, roundMask, roundBits;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
+    roundingPrecision = roundData->precision;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     if ( roundingPrecision == 80 ) goto precision80;
     if ( roundingPrecision == 64 ) {
@@ -623,8 +614,8 @@
             shift64RightJamming( zSig0, 1 - zExp, &zSig0 );
             zExp = 0;
             roundBits = zSig0 & roundMask;
-            if ( isTiny && roundBits ) float_raise( float_flag_underflow );
-            if ( roundBits ) float_exception_flags |= float_flag_inexact;
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
+            if ( roundBits ) roundData->exception |= float_flag_inexact;
             zSig0 += roundIncrement;
             if ( (sbits64) zSig0 < 0 ) zExp = 1;
             roundIncrement = roundMask + 1;
@@ -635,7 +626,7 @@
             return packFloatx80( zSign, zExp, zSig0 );
         }
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     zSig0 += roundIncrement;
     if ( zSig0 < roundIncrement ) {
         ++zExp;
@@ -672,7 +663,7 @@
            ) {
             roundMask = 0;
  overflow:
-            float_raise( float_flag_overflow | float_flag_inexact );
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
             if (    ( roundingMode == float_round_to_zero )
                  || ( zSign && ( roundingMode == float_round_up ) )
                  || ( ! zSign && ( roundingMode == float_round_down ) )
@@ -689,8 +680,8 @@
                 || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) );
             shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 );
             zExp = 0;
-            if ( isTiny && zSig1 ) float_raise( float_flag_underflow );
-            if ( zSig1 ) float_exception_flags |= float_flag_inexact;
+            if ( isTiny && zSig1 ) roundData->exception |= float_flag_underflow;
+            if ( zSig1 ) roundData->exception |= float_flag_inexact;
             if ( roundNearestEven ) {
                 increment = ( (sbits64) zSig1 < 0 );
             }
@@ -710,7 +701,7 @@
             return packFloatx80( zSign, zExp, zSig0 );
         }
     }
-    if ( zSig1 ) float_exception_flags |= float_flag_inexact;
+    if ( zSig1 ) roundData->exception |= float_flag_inexact;
     if ( increment ) {
         ++zSig0;
         if ( zSig0 == 0 ) {
@@ -740,7 +731,7 @@
 */
 static floatx80
  normalizeRoundAndPackFloatx80(
-     int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
+     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
  )
 {
     int8 shiftCount;
@@ -754,7 +745,7 @@
     shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
     zExp -= shiftCount;
     return
-        roundAndPackFloatx80( roundingPrecision, zSign, zExp, zSig0, zSig1 );
+        roundAndPackFloatx80( roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -767,14 +758,14 @@
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 int32_to_float32( int32 a )
+float32 int32_to_float32(struct roundingData *roundData, int32 a)
 {
     flag zSign;
 
     if ( a == 0 ) return 0;
     if ( a == 0x80000000 ) return packFloat32( 1, 0x9E, 0 );
     zSign = ( a < 0 );
-    return normalizeRoundAndPackFloat32( zSign, 0x9C, zSign ? - a : a );
+    return normalizeRoundAndPackFloat32( roundData, zSign, 0x9C, zSign ? - a : a );
 
 }
 
@@ -840,7 +831,7 @@
 largest integer with the same sign as `a' is returned.
 -------------------------------------------------------------------------------
 */
-int32 float32_to_int32( float32 a )
+int32 float32_to_int32( struct roundingData *roundData, float32 a )
 {
     flag aSign;
     int16 aExp, shiftCount;
@@ -856,7 +847,7 @@
     zSig = aSig;
     zSig <<= 32;
     if ( 0 < shiftCount ) shift64RightJamming( zSig, shiftCount, &zSig );
-    return roundAndPackInt32( aSign, zSig );
+    return roundAndPackInt32( roundData, aSign, zSig );
 
 }
 
@@ -889,13 +880,13 @@
         return 0x80000000;
     }
     else if ( aExp <= 0x7E ) {
-        if ( aExp | aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp | aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     aSig = ( aSig | 0x00800000 )<<8;
     z = aSig>>( - shiftCount );
     if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return aSign ? - z : z;
 
@@ -973,7 +964,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_round_to_int( float32 a )
+float32 float32_round_to_int( struct roundingData *roundData, float32 a )
 {
     flag aSign;
     int16 aExp;
@@ -988,11 +979,12 @@
         }
         return a;
     }
+    roundingMode = roundData->mode;
     if ( aExp <= 0x7E ) {
         if ( (bits32) ( a<<1 ) == 0 ) return a;
-        float_exception_flags |= float_flag_inexact;
+        roundData->exception |= float_flag_inexact;
         aSign = extractFloat32Sign( a );
-        switch ( float_rounding_mode ) {
+        switch ( roundingMode ) {
          case float_round_nearest_even:
             if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) {
                 return packFloat32( aSign, 0x7F, 0 );
@@ -1009,7 +1001,6 @@
     lastBitMask <<= 0x96 - aExp;
     roundBitsMask = lastBitMask - 1;
     z = a;
-    roundingMode = float_rounding_mode;
     if ( roundingMode == float_round_nearest_even ) {
         z += lastBitMask>>1;
         if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
@@ -1020,7 +1011,7 @@
         }
     }
     z &= ~ roundBitsMask;
-    if ( z != a ) float_exception_flags |= float_flag_inexact;
+    if ( z != a ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -1034,7 +1025,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float32 addFloat32Sigs( float32 a, float32 b, flag zSign )
+static float32 addFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits32 aSig, bSig, zSig;
@@ -1093,7 +1084,7 @@
         ++zExp;
     }
  roundAndPack:
-    return roundAndPackFloat32( zSign, zExp, zSig );
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1106,7 +1097,7 @@
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float32 subFloat32Sigs( float32 a, float32 b, flag zSign )
+static float32 subFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits32 aSig, bSig, zSig;
@@ -1123,7 +1114,7 @@
     if ( expDiff < 0 ) goto bExpBigger;
     if ( aExp == 0xFF ) {
         if ( aSig | bSig ) return propagateFloat32NaN( a, b );
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( aExp == 0 ) {
@@ -1132,7 +1123,7 @@
     }
     if ( bSig < aSig ) goto aBigger;
     if ( aSig < bSig ) goto bBigger;
-    return packFloat32( float_rounding_mode == float_round_down, 0, 0 );
+    return packFloat32( roundData->mode == float_round_down, 0, 0 );
  bExpBigger:
     if ( bExp == 0xFF ) {
         if ( bSig ) return propagateFloat32NaN( a, b );
@@ -1169,7 +1160,7 @@
     zExp = aExp;
  normalizeRoundAndPack:
     --zExp;
-    return normalizeRoundAndPackFloat32( zSign, zExp, zSig );
+    return normalizeRoundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1180,17 +1171,17 @@
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_add( float32 a, float32 b )
+float32 float32_add( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat32Sign( a );
     bSign = extractFloat32Sign( b );
     if ( aSign == bSign ) {
-        return addFloat32Sigs( a, b, aSign );
+        return addFloat32Sigs( roundData, a, b, aSign );
     }
     else {
-        return subFloat32Sigs( a, b, aSign );
+        return subFloat32Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -1202,17 +1193,17 @@
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_sub( float32 a, float32 b )
+float32 float32_sub( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat32Sign( a );
     bSign = extractFloat32Sign( b );
     if ( aSign == bSign ) {
-        return subFloat32Sigs( a, b, aSign );
+        return subFloat32Sigs( roundData, a, b, aSign );
     }
     else {
-        return addFloat32Sigs( a, b, aSign );
+        return addFloat32Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -1224,7 +1215,7 @@
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_mul( float32 a, float32 b )
+float32 float32_mul( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -1244,7 +1235,7 @@
             return propagateFloat32NaN( a, b );
         }
         if ( ( bExp | bSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         return packFloat32( zSign, 0xFF, 0 );
@@ -1252,7 +1243,7 @@
     if ( bExp == 0xFF ) {
         if ( bSig ) return propagateFloat32NaN( a, b );
         if ( ( aExp | aSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         return packFloat32( zSign, 0xFF, 0 );
@@ -1274,7 +1265,7 @@
         zSig <<= 1;
         --zExp;
     }
-    return roundAndPackFloat32( zSign, zExp, zSig );
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1285,7 +1276,7 @@
 IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_div( float32 a, float32 b )
+float32 float32_div( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -1302,7 +1293,7 @@
         if ( aSig ) return propagateFloat32NaN( a, b );
         if ( bExp == 0xFF ) {
             if ( bSig ) return propagateFloat32NaN( a, b );
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         return packFloat32( zSign, 0xFF, 0 );
@@ -1314,10 +1305,10 @@
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
             if ( ( aExp | aSig ) == 0 ) {
-                float_raise( float_flag_invalid );
+                roundData->exception |= float_flag_invalid;
                 return float32_default_nan;
             }
-            float_raise( float_flag_divbyzero );
+            roundData->exception |= float_flag_divbyzero;
             return packFloat32( zSign, 0xFF, 0 );
         }
         normalizeFloat32Subnormal( bSig, &bExp, &bSig );
@@ -1341,7 +1332,7 @@
     if ( ( zSig & 0x3F ) == 0 ) {
         zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 );
     }
-    return roundAndPackFloat32( zSign, zExp, zSig );
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1352,7 +1343,7 @@
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_rem( float32 a, float32 b )
+float32 float32_rem( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, expDiff;
@@ -1372,7 +1363,7 @@
         if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
             return propagateFloat32NaN( a, b );
         }
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( bExp == 0xFF ) {
@@ -1381,7 +1372,7 @@
     }
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         normalizeFloat32Subnormal( bSig, &bExp, &bSig );
@@ -1444,7 +1435,7 @@
     }
     zSign = ( (sbits32) aSig < 0 );
     if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat32( aSign ^ zSign, bExp, aSig );
+    return normalizeRoundAndPackFloat32( roundData, aSign ^ zSign, bExp, aSig );
 
 }
 
@@ -1455,7 +1446,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_sqrt( float32 a )
+float32 float32_sqrt( struct roundingData *roundData, float32 a )
 {
     flag aSign;
     int16 aExp, zExp;
@@ -1468,12 +1459,12 @@
     if ( aExp == 0xFF ) {
         if ( aSig ) return propagateFloat32NaN( a, 0 );
         if ( ! aSign ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( aSign ) {
         if ( ( aExp | aSig ) == 0 ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( aExp == 0 ) {
@@ -1499,7 +1490,7 @@
         }
     }
     shift32RightJamming( zSig, 1, &zSig );
-    return roundAndPackFloat32( 0, zExp, zSig );
+    return roundAndPackFloat32( roundData, 0, zExp, zSig );
 
 }
 
@@ -1661,7 +1652,7 @@
 largest integer with the same sign as `a' is returned.
 -------------------------------------------------------------------------------
 */
-int32 float64_to_int32( float64 a )
+int32 float64_to_int32( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp, shiftCount;
@@ -1674,7 +1665,7 @@
     if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
     shiftCount = 0x42C - aExp;
     if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( aSign, aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
 
 }
 
@@ -1705,7 +1696,7 @@
         goto invalid;
     }
     else if ( 52 < shiftCount ) {
-        if ( aExp || aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     aSig |= LIT64( 0x0010000000000000 );
@@ -1715,11 +1706,11 @@
     if ( aSign ) z = - z;
     if ( ( z < 0 ) ^ aSign ) {
  invalid:
-        float_exception_flags |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return aSign ? 0x80000000 : 0x7FFFFFFF;
     }
     if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return z;
 
@@ -1736,7 +1727,7 @@
 largest positive integer is returned.
 -------------------------------------------------------------------------------
 */
-int32 float64_to_uint32( float64 a )
+int32 float64_to_uint32( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp, shiftCount;
@@ -1749,7 +1740,7 @@
     if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
     shiftCount = 0x42C - aExp;
     if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( aSign, aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
 }
 
 /*
@@ -1778,7 +1769,7 @@
         goto invalid;
     }
     else if ( 52 < shiftCount ) {
-        if ( aExp || aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     aSig |= LIT64( 0x0010000000000000 );
@@ -1788,11 +1779,11 @@
     if ( aSign ) z = - z;
     if ( ( z < 0 ) ^ aSign ) {
  invalid:
-        float_exception_flags |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return aSign ? 0x80000000 : 0x7FFFFFFF;
     }
     if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return z;
 }
@@ -1805,7 +1796,7 @@
 Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float64_to_float32( float64 a )
+float32 float64_to_float32( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp;
@@ -1825,7 +1816,7 @@
         zSig |= 0x40000000;
         aExp -= 0x381;
     }
-    return roundAndPackFloat32( aSign, aExp, zSig );
+    return roundAndPackFloat32( roundData, aSign, aExp, zSig );
 
 }
 
@@ -1872,7 +1863,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_round_to_int( float64 a )
+float64 float64_round_to_int( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp;
@@ -1889,9 +1880,9 @@
     }
     if ( aExp <= 0x3FE ) {
         if ( (bits64) ( a<<1 ) == 0 ) return a;
-        float_exception_flags |= float_flag_inexact;
+        roundData->exception |= float_flag_inexact;
         aSign = extractFloat64Sign( a );
-        switch ( float_rounding_mode ) {
+        switch ( roundData->mode ) {
          case float_round_nearest_even:
             if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) {
                 return packFloat64( aSign, 0x3FF, 0 );
@@ -1909,7 +1900,7 @@
     lastBitMask <<= 0x433 - aExp;
     roundBitsMask = lastBitMask - 1;
     z = a;
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     if ( roundingMode == float_round_nearest_even ) {
         z += lastBitMask>>1;
         if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
@@ -1920,7 +1911,7 @@
         }
     }
     z &= ~ roundBitsMask;
-    if ( z != a ) float_exception_flags |= float_flag_inexact;
+    if ( z != a ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -1934,7 +1925,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float64 addFloat64Sigs( float64 a, float64 b, flag zSign )
+static float64 addFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig;
@@ -1993,7 +1984,7 @@
         ++zExp;
     }
  roundAndPack:
-    return roundAndPackFloat64( zSign, zExp, zSig );
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
 
 }
 
@@ -2006,7 +1997,7 @@
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float64 subFloat64Sigs( float64 a, float64 b, flag zSign )
+static float64 subFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig;
@@ -2023,7 +2014,7 @@
     if ( expDiff < 0 ) goto bExpBigger;
     if ( aExp == 0x7FF ) {
         if ( aSig | bSig ) return propagateFloat64NaN( a, b );
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( aExp == 0 ) {
@@ -2032,7 +2023,7 @@
     }
     if ( bSig < aSig ) goto aBigger;
     if ( aSig < bSig ) goto bBigger;
-    return packFloat64( float_rounding_mode == float_round_down, 0, 0 );
+    return packFloat64( roundData->mode == float_round_down, 0, 0 );
  bExpBigger:
     if ( bExp == 0x7FF ) {
         if ( bSig ) return propagateFloat64NaN( a, b );
@@ -2069,7 +2060,7 @@
     zExp = aExp;
  normalizeRoundAndPack:
     --zExp;
-    return normalizeRoundAndPackFloat64( zSign, zExp, zSig );
+    return normalizeRoundAndPackFloat64( roundData, zSign, zExp, zSig );
 
 }
 
@@ -2080,17 +2071,17 @@
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_add( float64 a, float64 b )
+float64 float64_add( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat64Sign( a );
     bSign = extractFloat64Sign( b );
     if ( aSign == bSign ) {
-        return addFloat64Sigs( a, b, aSign );
+        return addFloat64Sigs( roundData, a, b, aSign );
     }
     else {
-        return subFloat64Sigs( a, b, aSign );
+        return subFloat64Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -2102,17 +2093,17 @@
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_sub( float64 a, float64 b )
+float64 float64_sub( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat64Sign( a );
     bSign = extractFloat64Sign( b );
     if ( aSign == bSign ) {
-        return subFloat64Sigs( a, b, aSign );
+        return subFloat64Sigs( roundData, a, b, aSign );
     }
     else {
-        return addFloat64Sigs( a, b, aSign );
+        return addFloat64Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -2124,7 +2115,7 @@
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_mul( float64 a, float64 b )
+float64 float64_mul( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -2142,7 +2133,7 @@
             return propagateFloat64NaN( a, b );
         }
         if ( ( bExp | bSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         return packFloat64( zSign, 0x7FF, 0 );
@@ -2150,7 +2141,7 @@
     if ( bExp == 0x7FF ) {
         if ( bSig ) return propagateFloat64NaN( a, b );
         if ( ( aExp | aSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         return packFloat64( zSign, 0x7FF, 0 );
@@ -2172,7 +2163,7 @@
         zSig0 <<= 1;
         --zExp;
     }
-    return roundAndPackFloat64( zSign, zExp, zSig0 );
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig0 );
 
 }
 
@@ -2183,7 +2174,7 @@
 the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_div( float64 a, float64 b )
+float64 float64_div( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -2202,7 +2193,7 @@
         if ( aSig ) return propagateFloat64NaN( a, b );
         if ( bExp == 0x7FF ) {
             if ( bSig ) return propagateFloat64NaN( a, b );
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         return packFloat64( zSign, 0x7FF, 0 );
@@ -2214,10 +2205,10 @@
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
             if ( ( aExp | aSig ) == 0 ) {
-                float_raise( float_flag_invalid );
+                roundData->exception |= float_flag_invalid;
                 return float64_default_nan;
             }
-            float_raise( float_flag_divbyzero );
+            roundData->exception |= float_flag_divbyzero;
             return packFloat64( zSign, 0x7FF, 0 );
         }
         normalizeFloat64Subnormal( bSig, &bExp, &bSig );
@@ -2243,7 +2234,7 @@
         }
         zSig |= ( rem1 != 0 );
     }
-    return roundAndPackFloat64( zSign, zExp, zSig );
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
 
 }
 
@@ -2254,7 +2245,7 @@
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_rem( float64 a, float64 b )
+float64 float64_rem( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, expDiff;
@@ -2272,7 +2263,7 @@
         if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
             return propagateFloat64NaN( a, b );
         }
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( bExp == 0x7FF ) {
@@ -2281,7 +2272,7 @@
     }
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         normalizeFloat64Subnormal( bSig, &bExp, &bSig );
@@ -2329,7 +2320,7 @@
     }
     zSign = ( (sbits64) aSig < 0 );
     if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat64( aSign ^ zSign, bExp, aSig );
+    return normalizeRoundAndPackFloat64( roundData, aSign ^ zSign, bExp, aSig );
 
 }
 
@@ -2340,7 +2331,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_sqrt( float64 a )
+float64 float64_sqrt( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp, zExp;
@@ -2354,12 +2345,12 @@
     if ( aExp == 0x7FF ) {
         if ( aSig ) return propagateFloat64NaN( a, a );
         if ( ! aSign ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( aSign ) {
         if ( ( aExp | aSig ) == 0 ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( aExp == 0 ) {
@@ -2390,7 +2381,7 @@
         }
     }
     shift64RightJamming( zSig, 1, &zSig );
-    return roundAndPackFloat64( 0, zExp, zSig );
+    return roundAndPackFloat64( roundData, 0, zExp, zSig );
 
 }
 
@@ -2554,7 +2545,7 @@
 overflows, the largest integer with the same sign as `a' is returned.
 -------------------------------------------------------------------------------
 */
-int32 floatx80_to_int32( floatx80 a )
+int32 floatx80_to_int32( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp, shiftCount;
@@ -2567,7 +2558,7 @@
     shiftCount = 0x4037 - aExp;
     if ( shiftCount <= 0 ) shiftCount = 1;
     shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( aSign, aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
 
 }
 
@@ -2598,7 +2589,7 @@
         goto invalid;
     }
     else if ( 63 < shiftCount ) {
-        if ( aExp || aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     savedASig = aSig;
@@ -2607,11 +2598,11 @@
     if ( aSign ) z = - z;
     if ( ( z < 0 ) ^ aSign ) {
  invalid:
-        float_exception_flags |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return aSign ? 0x80000000 : 0x7FFFFFFF;
     }
     if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return z;
 
@@ -2625,7 +2616,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 floatx80_to_float32( floatx80 a )
+float32 floatx80_to_float32( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp;
@@ -2642,7 +2633,7 @@
     }
     shift64RightJamming( aSig, 33, &aSig );
     if ( aExp || aSig ) aExp -= 0x3F81;
-    return roundAndPackFloat32( aSign, aExp, aSig );
+    return roundAndPackFloat32( roundData, aSign, aExp, aSig );
 
 }
 
@@ -2654,7 +2645,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 floatx80_to_float64( floatx80 a )
+float64 floatx80_to_float64( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp;
@@ -2671,7 +2662,7 @@
     }
     shift64RightJamming( aSig, 1, &zSig );
     if ( aExp || aSig ) aExp -= 0x3C01;
-    return roundAndPackFloat64( aSign, aExp, zSig );
+    return roundAndPackFloat64( roundData, aSign, aExp, zSig );
 
 }
 
@@ -2683,7 +2674,7 @@
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_round_to_int( floatx80 a )
+floatx80 floatx80_round_to_int( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp;
@@ -2703,9 +2694,9 @@
              && ( (bits64) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) {
             return a;
         }
-        float_exception_flags |= float_flag_inexact;
+        roundData->exception |= float_flag_inexact;
         aSign = extractFloatx80Sign( a );
-        switch ( float_rounding_mode ) {
+        switch ( roundData->mode ) {
          case float_round_nearest_even:
             if ( ( aExp == 0x3FFE ) && (bits64) ( extractFloatx80Frac( a )<<1 )
                ) {
@@ -2729,7 +2720,7 @@
     lastBitMask <<= 0x403E - aExp;
     roundBitsMask = lastBitMask - 1;
     z = a;
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     if ( roundingMode == float_round_nearest_even ) {
         z.low += lastBitMask>>1;
         if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask;
@@ -2744,7 +2735,7 @@
         ++z.high;
         z.low = LIT64( 0x8000000000000000 );
     }
-    if ( z.low != a.low ) float_exception_flags |= float_flag_inexact;
+    if ( z.low != a.low ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -2758,7 +2749,7 @@
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
+static floatx80 addFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
 {
     int32 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig0, zSig1;
@@ -2814,7 +2805,7 @@
  roundAndPack:
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -2827,7 +2818,7 @@
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
+static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
 {
     int32 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig0, zSig1;
@@ -2845,7 +2836,7 @@
         if ( (bits64) ( ( aSig | bSig )<<1 ) ) {
             return propagateFloatx80NaN( a, b );
         }
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         z.low = floatx80_default_nan_low;
         z.high = floatx80_default_nan_high;
         return z;
@@ -2857,7 +2848,7 @@
     zSig1 = 0;
     if ( bSig < aSig ) goto aBigger;
     if ( aSig < bSig ) goto bBigger;
-    return packFloatx80( float_rounding_mode == float_round_down, 0, 0 );
+    return packFloatx80( roundData->mode == float_round_down, 0, 0 );
  bExpBigger:
     if ( bExp == 0x7FFF ) {
         if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
@@ -2883,7 +2874,7 @@
  normalizeRoundAndPack:
     return
         normalizeRoundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -2894,17 +2885,17 @@
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_add( floatx80 a, floatx80 b )
+floatx80 floatx80_add( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign;
     
     aSign = extractFloatx80Sign( a );
     bSign = extractFloatx80Sign( b );
     if ( aSign == bSign ) {
-        return addFloatx80Sigs( a, b, aSign );
+        return addFloatx80Sigs( roundData, a, b, aSign );
     }
     else {
-        return subFloatx80Sigs( a, b, aSign );
+        return subFloatx80Sigs( roundData, a, b, aSign );
     }
     
 }
@@ -2916,17 +2907,17 @@
 IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_sub( floatx80 a, floatx80 b )
+floatx80 floatx80_sub( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloatx80Sign( a );
     bSign = extractFloatx80Sign( b );
     if ( aSign == bSign ) {
-        return subFloatx80Sigs( a, b, aSign );
+        return subFloatx80Sigs( roundData, a, b, aSign );
     }
     else {
-        return addFloatx80Sigs( a, b, aSign );
+        return addFloatx80Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -2938,7 +2929,7 @@
 IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_mul( floatx80 a, floatx80 b )
+floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign, zSign;
     int32 aExp, bExp, zExp;
@@ -2964,7 +2955,7 @@
         if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
         if ( ( aExp | aSig ) == 0 ) {
  invalid:
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             z.low = floatx80_default_nan_low;
             z.high = floatx80_default_nan_high;
             return z;
@@ -2987,7 +2978,7 @@
     }
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -2998,7 +2989,7 @@
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_div( floatx80 a, floatx80 b )
+floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign, zSign;
     int32 aExp, bExp, zExp;
@@ -3029,12 +3020,12 @@
         if ( bSig == 0 ) {
             if ( ( aExp | aSig ) == 0 ) {
  invalid:
-                float_raise( float_flag_invalid );
+                roundData->exception |= float_flag_invalid;
                 z.low = floatx80_default_nan_low;
                 z.high = floatx80_default_nan_high;
                 return z;
             }
-            float_raise( float_flag_divbyzero );
+            roundData->exception |= float_flag_divbyzero;
             return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
         }
         normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
@@ -3068,7 +3059,7 @@
     }
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -3079,7 +3070,7 @@
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_rem( floatx80 a, floatx80 b )
+floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign, zSign;
     int32 aExp, bExp, expDiff;
@@ -3107,7 +3098,7 @@
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
  invalid:
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             z.low = floatx80_default_nan_low;
             z.high = floatx80_default_nan_high;
             return z;
@@ -3164,9 +3155,10 @@
         aSig1 = alternateASig1;
         zSign = ! zSign;
     }
+
     return
         normalizeRoundAndPackFloatx80(
-            80, zSign, bExp + expDiff, aSig0, aSig1 );
+            roundData, zSign, bExp + expDiff, aSig0, aSig1 );
 
 }
 
@@ -3177,7 +3169,7 @@
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_sqrt( floatx80 a )
+floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp, zExp;
@@ -3197,7 +3189,7 @@
     if ( aSign ) {
         if ( ( aExp | aSig0 ) == 0 ) return a;
  invalid:
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         z.low = floatx80_default_nan_low;
         z.high = floatx80_default_nan_high;
         return z;
@@ -3242,7 +3234,7 @@
     }
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, 0, zExp, zSig0, zSig1 );
+            roundData, 0, zExp, zSig0, zSig1 );
 
 }
 
@@ -3264,7 +3256,7 @@
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
         }
         return 0;
     }
@@ -3294,7 +3286,7 @@
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3328,7 +3320,7 @@
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3361,7 +3353,7 @@
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return 0;
     }
     return
@@ -3392,7 +3384,7 @@
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
         }
         return 0;
     }
@@ -3429,7 +3421,7 @@
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
         }
         return 0;
     }
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 1e17431..1c8799b 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -74,7 +74,7 @@
 Software IEC/IEEE floating-point rounding mode.
 -------------------------------------------------------------------------------
 */
-extern signed char float_rounding_mode;
+//extern int8 float_rounding_mode;
 enum {
     float_round_nearest_even = 0,
     float_round_to_zero      = 1,
@@ -86,7 +86,6 @@
 -------------------------------------------------------------------------------
 Software IEC/IEEE floating-point exception flags.
 -------------------------------------------------------------------------------
-extern signed char float_exception_flags;
 enum {
     float_flag_inexact   =  1,
     float_flag_underflow =  2,
@@ -99,7 +98,6 @@
 Changed the enumeration to match the bit order in the FPA11.
 */
 
-extern signed char float_exception_flags;
 enum {
     float_flag_invalid   =  1,
     float_flag_divbyzero =  2,
@@ -121,7 +119,7 @@
 Software IEC/IEEE integer-to-floating-point conversion routines.
 -------------------------------------------------------------------------------
 */
-float32 int32_to_float32( signed int );
+float32 int32_to_float32( struct roundingData *, signed int );
 float64 int32_to_float64( signed int );
 #ifdef FLOATX80
 floatx80 int32_to_floatx80( signed int );
@@ -132,7 +130,7 @@
 Software IEC/IEEE single-precision conversion routines.
 -------------------------------------------------------------------------------
 */
-signed int float32_to_int32( float32 );
+signed int float32_to_int32( struct roundingData *, float32 );
 signed int float32_to_int32_round_to_zero( float32 );
 float64 float32_to_float64( float32 );
 #ifdef FLOATX80
@@ -144,13 +142,13 @@
 Software IEC/IEEE single-precision operations.
 -------------------------------------------------------------------------------
 */
-float32 float32_round_to_int( float32 );
-float32 float32_add( float32, float32 );
-float32 float32_sub( float32, float32 );
-float32 float32_mul( float32, float32 );
-float32 float32_div( float32, float32 );
-float32 float32_rem( float32, float32 );
-float32 float32_sqrt( float32 );
+float32 float32_round_to_int( struct roundingData*, float32 );
+float32 float32_add( struct roundingData *, float32, float32 );
+float32 float32_sub( struct roundingData *, float32, float32 );
+float32 float32_mul( struct roundingData *, float32, float32 );
+float32 float32_div( struct roundingData *, float32, float32 );
+float32 float32_rem( struct roundingData *, float32, float32 );
+float32 float32_sqrt( struct roundingData*, float32 );
 char float32_eq( float32, float32 );
 char float32_le( float32, float32 );
 char float32_lt( float32, float32 );
@@ -164,9 +162,9 @@
 Software IEC/IEEE double-precision conversion routines.
 -------------------------------------------------------------------------------
 */
-signed int float64_to_int32( float64 );
+signed int float64_to_int32( struct roundingData *, float64 );
 signed int float64_to_int32_round_to_zero( float64 );
-float32 float64_to_float32( float64 );
+float32 float64_to_float32( struct roundingData *, float64 );
 #ifdef FLOATX80
 floatx80 float64_to_floatx80( float64 );
 #endif
@@ -176,13 +174,13 @@
 Software IEC/IEEE double-precision operations.
 -------------------------------------------------------------------------------
 */
-float64 float64_round_to_int( float64 );
-float64 float64_add( float64, float64 );
-float64 float64_sub( float64, float64 );
-float64 float64_mul( float64, float64 );
-float64 float64_div( float64, float64 );
-float64 float64_rem( float64, float64 );
-float64 float64_sqrt( float64 );
+float64 float64_round_to_int( struct roundingData *, float64 );
+float64 float64_add( struct roundingData *, float64, float64 );
+float64 float64_sub( struct roundingData *, float64, float64 );
+float64 float64_mul( struct roundingData *, float64, float64 );
+float64 float64_div( struct roundingData *, float64, float64 );
+float64 float64_rem( struct roundingData *, float64, float64 );
+float64 float64_sqrt( struct roundingData *, float64 );
 char float64_eq( float64, float64 );
 char float64_le( float64, float64 );
 char float64_lt( float64, float64 );
@@ -198,31 +196,23 @@
 Software IEC/IEEE extended double-precision conversion routines.
 -------------------------------------------------------------------------------
 */
-signed int floatx80_to_int32( floatx80 );
+signed int floatx80_to_int32( struct roundingData *, floatx80 );
 signed int floatx80_to_int32_round_to_zero( floatx80 );
-float32 floatx80_to_float32( floatx80 );
-float64 floatx80_to_float64( floatx80 );
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE extended double-precision rounding precision.  Valid
-values are 32, 64, and 80.
--------------------------------------------------------------------------------
-*/
-extern signed char floatx80_rounding_precision;
+float32 floatx80_to_float32( struct roundingData *, floatx80 );
+float64 floatx80_to_float64( struct roundingData *, floatx80 );
 
 /*
 -------------------------------------------------------------------------------
 Software IEC/IEEE extended double-precision operations.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_round_to_int( floatx80 );
-floatx80 floatx80_add( floatx80, floatx80 );
-floatx80 floatx80_sub( floatx80, floatx80 );
-floatx80 floatx80_mul( floatx80, floatx80 );
-floatx80 floatx80_div( floatx80, floatx80 );
-floatx80 floatx80_rem( floatx80, floatx80 );
-floatx80 floatx80_sqrt( floatx80 );
+floatx80 floatx80_round_to_int( struct roundingData *, floatx80 );
+floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_sqrt( struct roundingData *, floatx80 );
 char floatx80_eq( floatx80, floatx80 );
 char floatx80_le( floatx80, floatx80 );
 char floatx80_lt( floatx80, floatx80 );
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index ec58d3e..df35c45 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -115,7 +115,7 @@
 	return (tailaddr > stack) && (tailaddr < stack_base);
 }
 
-void arm_backtrace(struct pt_regs const *regs, unsigned int depth)
+void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	struct frame_tail *tail;
 	unsigned long last_address = 0;
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index b801cd6..9b367a6 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -770,6 +770,9 @@
 		if ((s64)m_sig < 0) {
 			vdd->sign = vfp_sign_negate(vdd->sign);
 			m_sig = -m_sig;
+		} else if (m_sig == 0) {
+			vdd->sign = (fpscr & FPSCR_RMODE_MASK) ==
+				      FPSCR_ROUND_MINUSINF ? 0x8000 : 0;
 		}
 	} else {
 		m_sig += vdn->significand;
diff --git a/arch/arm26/mm/fault.c b/arch/arm26/mm/fault.c
index dacca8b..bd6f2db 100644
--- a/arch/arm26/mm/fault.c
+++ b/arch/arm26/mm/fault.c
@@ -176,12 +176,12 @@
 	 * Handle the "normal" cases first - successful and sigbus
 	 */
 	switch (fault) {
-	case 2:
+	case VM_FAULT_MAJOR:
 		tsk->maj_flt++;
 		return fault;
-	case 1:
+	case VM_FAULT_MINOR:
 		tsk->min_flt++;
-	case 0:
+	case VM_FAULT_SIGBUS:
 		return fault;
 	}
 
@@ -226,14 +226,11 @@
 	/*
 	 * Handle the "normal" case first
 	 */
-	if (fault > 0)
+	switch (fault) {
+	case VM_FAULT_MINOR:
+	case VM_FAULT_MAJOR:
 		return 0;
-
-	/*
-	 * We had some memory, but were unable to
-	 * successfully fix up this page fault.
-	 */
-	if (fault == 0){
+	case VM_FAULT_SIGBUS:
 		goto do_sigbus;
 	}
 
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index fe1cc36..934c510 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -284,13 +284,13 @@
 	 */
 
 	switch (handle_mm_fault(mm, vma, address, writeaccess & 1)) {
-	case 1:
+	case VM_FAULT_MINOR:
 		tsk->min_flt++;
 		break;
-	case 2:
+	case VM_FAULT_MAJOR:
 		tsk->maj_flt++;
 		break;
-	case 0:
+	case VM_FAULT_SIGBUS:
 		goto do_sigbus;
 	default:
 		goto out_of_memory;
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 41d02ac..8b3eb50 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -163,13 +163,13 @@
 	 * the fault.
 	 */
 	switch (handle_mm_fault(mm, vma, ear0, write)) {
-	case 1:
+	case VM_FAULT_MINOR:
 		current->min_flt++;
 		break;
-	case 2:
+	case VM_FAULT_MAJOR:
 		current->maj_flt++;
 		break;
-	case 0:
+	case VM_FAULT_SIGBUS:
 		goto do_sigbus;
 	default:
 		goto out_of_memory;
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 963e17a..60a9e54 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -442,6 +442,13 @@
 			(u32) data->acpi_data.states[i].transition_latency);
 
 	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+	
+	/*
+	 * the first call to ->target() should result in us actually
+	 * writing something to the appropriate registers.
+	 */
+	data->resume = 1;
+	
 	return (result);
 
  err_freqfree:
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 31f65c8..ab6e061 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -1,5 +1,5 @@
 /*
- *   (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *   (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -44,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.40.2"
+#define VERSION "version 1.50.3"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -231,7 +231,7 @@
 /*
  * Reduce the vid by the max of step or reqvid.
  * Decreasing vid codes represent increasing voltages:
- * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
  */
 static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
 {
@@ -466,7 +466,7 @@
 	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
 	if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
 	    ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
-	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
+	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
 		printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
 		goto out;
 	}
@@ -695,6 +695,7 @@
 
 	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
 	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+	data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
 	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
 	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
 	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
@@ -734,8 +735,16 @@
 	}
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
-		u32 fid = data->acpi_data.states[i].control & FID_MASK;
-		u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+		u32 fid;
+		u32 vid;
+
+		if (data->exttype) {
+			fid = data->acpi_data.states[i].status & FID_MASK;
+			vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK;
+		} else {
+			fid = data->acpi_data.states[i].control & FID_MASK;
+			vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+		}
 
 		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
@@ -752,7 +761,7 @@
 		}
 
 		/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
-		if (vid == 0x1f) {
+		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
 			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 			continue;
@@ -929,15 +938,6 @@
 
 	down(&fidvid_sem);
 
-	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
-		/* make sure the sibling is initialized */
-		if (!powernow_data[i]) {
-                        ret = 0;
-                        up(&fidvid_sem);
-                        goto err_out;
-                }
-	}
-
 	powernow_k8_acpi_pst_values(data, newstate);
 
 	if (transition_frequency(data, newstate)) {
@@ -977,7 +977,7 @@
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = CPU_MASK_ALL;
-	int rc;
+	int rc, i;
 
 	if (!check_supported_cpu(pol->cpu))
 		return -ENODEV;
@@ -1063,7 +1063,9 @@
 	printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 	       data->currfid, data->currvid);
 
-	powernow_data[pol->cpu] = data;
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		powernow_data[i] = data;
+	}
 
 	return 0;
 
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index 9ed5bf2..b1e85bb 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -1,5 +1,5 @@
 /*
- *  (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -19,6 +19,7 @@
 	u32 vidmvs;  /* usable value calculated from mvs */
 	u32 vstable; /* voltage stabilization time, units 20 us */
 	u32 plllock; /* pll lock time, units 1 us */
+        u32 exttype; /* extended interface = 1 */
 
 	/* keep track of the current fid / vid */
 	u32 currvid, currfid;
@@ -41,7 +42,7 @@
 #define CPUID_XFAM			0x0ff00000	/* extended family */
 #define CPUID_XFAM_K8			0
 #define CPUID_XMOD			0x000f0000	/* extended model */
-#define CPUID_XMOD_REV_E		0x00020000
+#define CPUID_XMOD_REV_F		0x00040000
 #define CPUID_USE_XFAM_XMOD		0x00000f00
 #define CPUID_GET_MAX_CAPABILITIES	0x80000000
 #define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
@@ -57,25 +58,26 @@
 
 /* Field definitions within the FID VID Low Control MSR : */
 #define MSR_C_LO_INIT_FID_VID     0x00010000
-#define MSR_C_LO_NEW_VID          0x00001f00
-#define MSR_C_LO_NEW_FID          0x0000002f
+#define MSR_C_LO_NEW_VID          0x00003f00
+#define MSR_C_LO_NEW_FID          0x0000003f
 #define MSR_C_LO_VID_SHIFT        8
 
 /* Field definitions within the FID VID High Control MSR : */
-#define MSR_C_HI_STP_GNT_TO       0x000fffff
+#define MSR_C_HI_STP_GNT_TO 	  0x000fffff
 
 /* Field definitions within the FID VID Low Status MSR : */
-#define MSR_S_LO_CHANGE_PENDING   0x80000000	/* cleared when completed */
-#define MSR_S_LO_MAX_RAMP_VID     0x1f000000
+#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
 #define MSR_S_LO_MAX_FID          0x003f0000
 #define MSR_S_LO_START_FID        0x00003f00
 #define MSR_S_LO_CURRENT_FID      0x0000003f
 
 /* Field definitions within the FID VID High Status MSR : */
-#define MSR_S_HI_MAX_WORKING_VID  0x001f0000
-#define MSR_S_HI_START_VID        0x00001f00
-#define MSR_S_HI_CURRENT_VID      0x0000001f
-#define MSR_C_HI_STP_GNT_BENIGN   0x00000001
+#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
+#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
+#define MSR_S_HI_START_VID        0x00003f00
+#define MSR_S_HI_CURRENT_VID      0x0000003f
+#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
 
 /*
  * There are restrictions frequencies have to follow:
@@ -99,13 +101,15 @@
 #define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
 
 #define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
-#define LEAST_VID 0x1e	/* Lowest (numerically highest) useful vid value */
+#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
 
 #define MIN_FREQ 800	/* Min and max freqs, per spec */
 #define MAX_FREQ 5000
 
 #define INVALID_FID_MASK 0xffffffc1  /* not a valid fid if these bits are set */
-#define INVALID_VID_MASK 0xffffffe0  /* not a valid vid if these bits are set */
+#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
+
+#define VID_OFF 0x3f
 
 #define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
 
@@ -121,12 +125,14 @@
                                                                                                     
 #define IRT_SHIFT      30
 #define RVO_SHIFT      28
+#define EXT_TYPE_SHIFT 27
 #define PLL_L_SHIFT    20
 #define MVS_SHIFT      18
 #define VST_SHIFT      11
 #define VID_SHIFT       6
 #define IRT_MASK        3
 #define RVO_MASK        3
+#define EXT_TYPE_MASK   1
 #define PLL_L_MASK   0x7f
 #define MVS_MASK        3
 #define VST_MASK     0x7f
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index 1d768b2..6c55b50 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -128,7 +128,7 @@
 	cpuid_count(4, index, &eax, &ebx, &ecx, &edx);
 	cache_eax.full = eax;
 	if (cache_eax.split.type == CACHE_TYPE_NULL)
-		return -1;
+		return -EIO; /* better error ? */
 
 	this_leaf->eax.full = eax;
 	this_leaf->ebx.full = ebx;
@@ -334,6 +334,7 @@
 	struct _cpuid4_info	*this_leaf;
 	unsigned long 		j;
 	int 			retval;
+	cpumask_t		oldmask;
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -345,19 +346,26 @@
 	memset(cpuid4_info[cpu], 0,
 	    sizeof(struct _cpuid4_info) * num_cache_leaves);
 
+	oldmask = current->cpus_allowed;
+	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (retval)
+		goto out;
+
 	/* Do cpuid and store the results */
+	retval = 0;
 	for (j = 0; j < num_cache_leaves; j++) {
 		this_leaf = CPUID4_INFO_IDX(cpu, j);
 		retval = cpuid4_cache_lookup(j, this_leaf);
 		if (unlikely(retval < 0))
-			goto err_out;
+			break;
 		cache_shared_cpu_map_setup(cpu, j);
 	}
-	return 0;
+	set_cpus_allowed(current, oldmask);
 
-err_out:
-	free_cache_attributes(cpu);
-	return -ENOMEM;
+out:
+	if (retval)
+		free_cache_attributes(cpu);
+	return retval;
 }
 
 #ifdef CONFIG_SYSFS
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c
index f57e5ee..fc42638 100644
--- a/arch/i386/kernel/cpu/transmeta.c
+++ b/arch/i386/kernel/cpu/transmeta.c
@@ -76,6 +76,12 @@
 #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV)
         if ( c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686 )
 		c->x86 = 6;
+
+#ifdef CONFIG_SYSCTL
+	/* randomize_va_space slows us down enormously;
+	   it probably triggers retranslation of x86->native bytecode */
+	randomize_va_space = 0;
+#endif
 }
 
 static void transmeta_identify(struct cpuinfo_x86 * c)
diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c
index 52ed18d..cb699a2 100644
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/i386/kernel/machine_kexec.c
@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <asm/apic.h>
 #include <asm/cpufeature.h>
+#include <asm/desc.h>
 
 static inline unsigned long read_cr3(void)
 {
@@ -90,33 +91,32 @@
 }
 #endif
 
-
 static void set_idt(void *newidt, __u16 limit)
 {
-	unsigned char curidt[6];
+	struct Xgt_desc_struct curidt;
 
 	/* ia32 supports unaliged loads & stores */
-	(*(__u16 *)(curidt)) = limit;
-	(*(__u32 *)(curidt +2)) = (unsigned long)(newidt);
+	curidt.size    = limit;
+	curidt.address = (unsigned long)newidt;
 
 	__asm__ __volatile__ (
-		"lidt %0\n"
-		: "=m" (curidt)
+		"lidtl %0\n"
+		: : "m" (curidt)
 		);
 };
 
 
 static void set_gdt(void *newgdt, __u16 limit)
 {
-	unsigned char curgdt[6];
+	struct Xgt_desc_struct curgdt;
 
 	/* ia32 supports unaligned loads & stores */
-	(*(__u16 *)(curgdt)) = limit;
-	(*(__u32 *)(curgdt +2)) = (unsigned long)(newgdt);
+	curgdt.size    = limit;
+	curgdt.address = (unsigned long)newgdt;
 
 	__asm__ __volatile__ (
-		"lgdt %0\n"
-		: "=m" (curgdt)
+		"lgdtl %0\n"
+		: : "m" (curgdt)
 		);
 };
 
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index af917f6..ce838ab 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -1116,7 +1116,15 @@
 		 */
 		int irq = gsi;
 		if (gsi < MAX_GSI_NUM) {
-			gsi = pci_irq++;
+			if (gsi > 15)
+				gsi = pci_irq++;
+#ifdef CONFIG_ACPI_BUS
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_fadt.sci_int)
+				gsi = pci_irq++;
+#endif
 			gsi_to_irq[irq] = gsi;
 		} else {
 			printk(KERN_ERR "GSI %u is too high\n", gsi);
diff --git a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c
index e51edf0..5f5b075 100644
--- a/arch/i386/kernel/numaq.c
+++ b/arch/i386/kernel/numaq.c
@@ -31,6 +31,7 @@
 #include <linux/nodemask.h>
 #include <asm/numaq.h>
 #include <asm/topology.h>
+#include <asm/processor.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -77,3 +78,11 @@
 	smp_dump_qct();
 	return 1;
 }
+
+static int __init numaq_dsc_disable(void)
+{
+	printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+	tsc_disable = 1;
+	return 0;
+}
+core_initcall(numaq_dsc_disable);
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index 468500a..9b21a31 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -251,7 +251,7 @@
 	.long sys_io_submit
 	.long sys_io_cancel
 	.long sys_fadvise64	/* 250 */
-	.long sys_set_zone_reclaim
+	.long sys_ni_syscall
 	.long sys_exit_group
 	.long sys_lookup_dcookie
 	.long sys_epoll_create
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index b358f07..c369a8b 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -243,6 +243,14 @@
 		/* now the roundup is correct, convert to PAGE_SIZE pages */
 		size = size * PTRS_PER_PTE;
 
+		if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
+			/*
+			 * Adjust size if node_end_pfn is not on a proper
+			 * pmd boundary. remap_numa_kva will barf otherwise.
+			 */
+			size +=  node_end_pfn[nid] & (PTRS_PER_PTE-1);
+		}
+
 		/*
 		 * Validate the region we are allocating only contains valid
 		 * pages.
diff --git a/arch/i386/pci/acpi.c b/arch/i386/pci/acpi.c
index 2db65ec..42913f4 100644
--- a/arch/i386/pci/acpi.c
+++ b/arch/i386/pci/acpi.c
@@ -30,6 +30,7 @@
 	acpi_irq_penalty_init();
 	pcibios_scanned++;
 	pcibios_enable_irq = acpi_pci_irq_enable;
+	pcibios_disable_irq = acpi_pci_irq_disable;
 
 	if (pci_routeirq) {
 		/*
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 70bcd53..ade5bc5 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -254,3 +254,9 @@
 
 	return pcibios_enable_irq(dev);
 }
+
+void pcibios_disable_device (struct pci_dev *dev)
+{
+	if (pcibios_disable_irq)
+		pcibios_disable_irq(dev);
+}
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index 766b104..86348b6 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -56,6 +56,7 @@
 };
 
 int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
+void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
 
 /*
  *  Check passed address for the PCI IRQ Routing Table signature
@@ -550,6 +551,13 @@
 static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
 	/* FIXME: We should move some of the quirk fixup stuff here */
+
+	if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
+			device == PCI_DEVICE_ID_VIA_82C586_0) {
+		/* Asus k7m bios wrongly reports 82C686A as 586-compatible */
+		device = PCI_DEVICE_ID_VIA_82C686;
+	}
+
 	switch(device)
 	{
 		case PCI_DEVICE_ID_VIA_82C586_0:
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index a80f0f5..127d53a 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -73,3 +73,4 @@
 extern spinlock_t pci_config_lock;
 
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
+extern void (*pcibios_disable_irq)(struct pci_dev *dev);
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 66946f3..9be53e1 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1573,7 +1573,7 @@
 	data8 sys_keyctl
 	data8 sys_ioprio_set
 	data8 sys_ioprio_get			// 1275
-	data8 sys_set_zone_reclaim
+	data8 sys_ni_syscall
 	data8 sys_inotify_init
 	data8 sys_inotify_add_watch
 	data8 sys_inotify_rm_watch
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 3c47072..8a2b77b 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -205,8 +205,7 @@
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-static inline void
-do_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING, regs);
@@ -221,6 +220,7 @@
 	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
+	write_seqlock(&xtime_lock);
 	if ((time_status & STA_UNSYNC) == 0
 		&& xtime.tv_sec > last_rtc_update + 660
 		&& (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
@@ -231,6 +231,7 @@
 		else	/* do it again in 60 s */
 			last_rtc_update = xtime.tv_sec - 600;
 	}
+	write_sequnlock(&xtime_lock);
 	/* As we return to user mode fire off the other CPU schedulers..
 	   this is basically because we don't yet share IRQ's around.
 	   This message is rigged to be safe on the 386 - basically it's
@@ -238,14 +239,8 @@
 
 #ifdef CONFIG_SMP
 	smp_local_timer_interrupt(regs);
+	smp_send_timer();
 #endif
-}
-
-irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	write_seqlock(&xtime_lock);
-	do_timer_interrupt(irq, NULL, regs);
-	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c
index ac48b6d..aec1527 100644
--- a/arch/m68k/mm/fault.c
+++ b/arch/m68k/mm/fault.c
@@ -160,13 +160,13 @@
 	printk("handle_mm_fault returns %d\n",fault);
 #endif
 	switch (fault) {
-	case 1:
+	case VM_FAULT_MINOR:
 		current->min_flt++;
 		break;
-	case 2:
+	case VM_FAULT_MAJOR:
 		current->maj_flt++;
 		break;
-	case 0:
+	case VM_FAULT_SIGBUS:
 		goto bus_err;
 	default:
 		goto out_of_memory;
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index eaa7014..0ad945d 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -178,17 +178,17 @@
 	 */
 
 	switch (handle_mm_fault(mm, vma, address, (acc_type & VM_WRITE) != 0)) {
-	      case 1:
+	      case VM_FAULT_MINOR:
 		++current->min_flt;
 		break;
-	      case 2:
+	      case VM_FAULT_MAJOR:
 		++current->maj_flt;
 		break;
-	      case 0:
+	      case VM_FAULT_SIGBUS:
 		/*
-		 * We ran out of memory, or some other thing happened
-		 * to us that made us unable to handle the page fault
-		 * gracefully.
+		 * We hit a hared mapping outside of the file, or some
+		 * other thing happened to us that made us unable to
+		 * handle the page fault gracefully.
 		 */
 		goto bad_area;
 	      default:
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 2c2da9b..f6db3b3 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -558,6 +558,7 @@
 
 config APUS
 	bool "Amiga-APUS"
+	depends on BROKEN
 	help
 	  Select APUS if configuring for a PowerUP Amiga.
 	  More information is available at:
@@ -647,6 +648,7 @@
 
 config GEMINI
 	bool "Synergy-Gemini"
+	depends on BROKEN
 	help
 	  Select Gemini if configuring for a Synergy Microsystems' Gemini
 	  series Single Board Computer.  More information is available at:
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index 991b4cb..d4dc4fa 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -61,6 +61,12 @@
          end-$(CONFIG_EMBEDDEDBOOT)	:= embedded
         misc-$(CONFIG_EMBEDDEDBOOT)	:= misc-embedded.o
 
+      zimage-$(CONFIG_BAMBOO)		:= zImage-TREE
+zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
+         end-$(CONFIG_BAMBOO)		:= bamboo
+  entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
+     extra.o-$(CONFIG_BAMBOO)		:= pibs.o
+
       zimage-$(CONFIG_EBONY)		:= zImage-TREE
 zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
          end-$(CONFIG_EBONY)		:= ebony
diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c
index 1348740..67222d5 100644
--- a/arch/ppc/boot/simple/pibs.c
+++ b/arch/ppc/boot/simple/pibs.c
@@ -91,9 +91,11 @@
 
 	mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
 	memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
-#ifdef CONFIG_440GX
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP)
 	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
 	memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
+#endif
+#ifdef CONFIG_440GX
 	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
 	memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
 	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);
diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig
new file mode 100644
index 0000000..0ba4e70
--- /dev/null
+++ b/arch/ppc/configs/bamboo_defconfig
@@ -0,0 +1,943 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Tue Jun 28 15:24:25 2005
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_POWER3 is not set
+# CONFIG_POWER4 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+
+#
+# IBM 4xx options
+#
+CONFIG_BAMBOO=y
+# CONFIG_EBONY is not set
+# CONFIG_LUAN is not set
+# CONFIG_OCOTEA is not set
+CONFIG_440EP=y
+CONFIG_440=y
+CONFIG_IBM440EP_ERR42=y
+CONFIG_IBM_OCP=y
+# CONFIG_PPC4xx_DMA is not set
+CONFIG_PPC_GEN550=y
+# CONFIG_PM is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_IBM_EMAC_ERRMSG is not set
+CONFIG_IBM_EMAC_RXB=64
+CONFIG_IBM_EMAC_TXB=8
+CONFIG_IBM_EMAC_FGAP=8
+CONFIG_IBM_EMAC_SKBRES=0
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=y
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+CONFIG_PPC_OCP=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
index 50936cd..8a3d74f 100644
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -852,6 +852,26 @@
 
 #endif /* CONFIG_40x */
 #ifdef CONFIG_44x
+	{
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x40000850,
+		.cpu_name		= "440EP Rev. A",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= COMMON_PPC, /* 440EP has an FPU */
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
+	{
+		.pvr_mask		= 0xf0000fff,
+		.pvr_value		= 0x400008d3,
+		.cpu_name		= "440EP Rev. B",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= COMMON_PPC, /* 440EP has an FPU */
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
 	{ 	/* 440GP Rev. B */
 		.pvr_mask		= 0xf0000fff,
 		.pvr_value		= 0x40000440,
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index d4df686..cb83045 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -215,6 +215,7 @@
 	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
 	mtlr	r10
 	addi	r9,r1,STACK_FRAME_OVERHEAD
+	PPC440EP_ERR42
 	blrl			/* Call handler */
 	.globl	ret_from_syscall
 ret_from_syscall:
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
index 6c7ae60..69ff3a9 100644
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -179,24 +179,26 @@
 4:
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	/*
-	 * Add temporary UART mapping for early debug.  This
-	 * mapping must be identical to that used by the early
-	 * bootloader code since the same asm/serial.h parameters
-	 * are used for polled operation.
+	 * Add temporary UART mapping for early debug.
+	 * We can map UART registers wherever we want as long as they don't
+	 * interfere with other system mappings (e.g. with pinned entries).
+	 * For an example of how we handle this - see ocotea.h.       --ebs
 	 */
  	/* pageid fields */
 	lis	r3,UART0_IO_BASE@h
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
 
 	/* xlat fields */
 	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
+#ifndef CONFIG_440EP
 	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+#endif
 
 	/* attrib fields */
 	li	r5,0
 	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
 
-        li      r0,1                    /* TLB slot 1 */
+        li      r0,0                    /* TLB slot 0 */
 
 	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
 	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
@@ -228,6 +230,16 @@
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
 	mtspr	SPRN_IVPR,r4
 
+#ifdef CONFIG_440EP
+	/* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+	mfspr	r2,SPRN_CCR0
+	lis	r3,0xffef
+	ori	r3,r3,0xffff
+	and	r2,r2,r3
+	mtspr	SPRN_CCR0,r2
+	isync
+#endif
+
 	/*
 	 * This is where the main kernel code starts.
 	 */
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index 191a8de..ce71b4a 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -1145,6 +1145,7 @@
 	stwu	r0,-16(r1)
 	mtlr	r30		/* fn addr in lr */
 	mr	r3,r31		/* load arg and call fn */
+	PPC440EP_ERR42
 	blrl
 	li	r0,__NR_exit	/* exit if function returns */
 	li	r3,0
@@ -1451,3 +1452,6 @@
 	.long sys_waitid
 	.long sys_ioprio_set
 	.long sys_ioprio_get
+	.long sys_inotify_init		/* 275 */
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index a0612a8..f7c0457 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -68,6 +68,11 @@
 	depends on 44x
 	default EBONY
 
+config BAMBOO
+	bool "Bamboo"
+	help
+	  This option enables support for the IBM PPC440EP evaluation board.
+
 config EBONY
 	bool "Ebony"
 	help
@@ -98,6 +103,12 @@
 	depends on ASH
 	default y
 
+config 440EP
+	bool
+	depends on BAMBOO
+	select PPC_FPU
+	default y
+
 config 440GP
 	bool
 	depends on EBONY
@@ -115,7 +126,7 @@
 
 config 440
 	bool
-	depends on 440GP || 440SP
+	depends on 440GP || 440SP || 440EP
 	default y
 
 config 440A
@@ -123,6 +134,11 @@
 	depends on 440GX
 	default y
 
+config IBM440EP_ERR42
+	bool
+	depends on 440EP
+	default y
+
 # All 405-based cores up until the 405GPR and 405EP have this errata.
 config IBM405_ERR77
 	bool
@@ -142,7 +158,7 @@
 
 config IBM_OCP
 	bool
-	depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config XILINX_OCP
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index ea470c6..844c3b5 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the PowerPC 4xx linux kernel.
 
 obj-$(CONFIG_ASH)		+= ash.o
+obj-$(CONFIG_BAMBOO)		+= bamboo.o
 obj-$(CONFIG_CPCI405)		+= cpci405.o
 obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
@@ -19,6 +20,7 @@
 obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
 obj-$(CONFIG_NP405H)		+= ibmnp405h.o
 obj-$(CONFIG_REDWOOD_6)		+= ibmstbx25.o
+obj-$(CONFIG_440EP)		+= ibm440ep.o
 obj-$(CONFIG_440GP)		+= ibm440gp.o
 obj-$(CONFIG_440GX)		+= ibm440gx.o
 obj-$(CONFIG_440SP)		+= ibm440sp.o
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
new file mode 100644
index 0000000..f116787
--- /dev/null
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -0,0 +1,427 @@
+/*
+ * arch/ppc/platforms/4xx/bamboo.c
+ *
+ * Bamboo board specific routines
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/ethtool.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/gen550.h>
+#include <syslib/ibm440gx_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the  standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+/*
+ * Bamboo external IRQ triggering/polarity settings
+ */
+unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
+	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
+};
+
+static void __init
+bamboo_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = BAMBOO_TMRCLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+
+}
+
+static int
+bamboo_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: IBM\n");
+	seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
+
+	return 0;
+}
+
+static inline int
+bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *	PCI IDSEL/INTPIN->INTLINE
+	 * 	   A   B   C   D
+	 */
+	{
+		{ 28, 28, 28, 28 },	/* IDSEL 1 - PCI Slot 0 */
+		{ 27, 27, 27, 27 },	/* IDSEL 2 - PCI Slot 1 */
+		{ 26, 26, 26, 26 },	/* IDSEL 3 - PCI Slot 2 */
+		{ 25, 25, 25, 25 },	/* IDSEL 4 - PCI Slot 3 */
+	};
+
+	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __init bamboo_set_emacdata(void)
+{
+	unsigned char * selection1_base;
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+	u8 selection1_val;
+	int mode;
+
+	selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
+	selection1_val = readb(selection1_base);
+	iounmap((void *) selection1_base);
+	if (BAMBOO_SEL_MII(selection1_val))
+		mode = PHY_MODE_MII;
+	else if (BAMBOO_SEL_RMII(selection1_val))
+		mode = PHY_MODE_RMII;
+	else
+		mode = PHY_MODE_SMII;
+
+	/* Set mac_addr and phy mode for each EMAC */
+
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+	emacdata = def->additions;
+	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+	emacdata->phy_mode = mode;
+
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
+	emacdata = def->additions;
+	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
+	emacdata->phy_mode = mode;
+}
+
+static int
+bamboo_exclude_device(unsigned char bus, unsigned char devfn)
+{
+	return (bus == 0 && devfn == 0);
+}
+
+#define PCI_READW(offset) \
+        (readw((void *)((u32)pci_reg_base+offset)))
+
+#define PCI_WRITEW(value, offset) \
+	(writew(value, (void *)((u32)pci_reg_base+offset)))
+
+#define PCI_WRITEL(value, offset) \
+	(writel(value, (void *)((u32)pci_reg_base+offset)))
+
+static void __init
+bamboo_setup_pci(void)
+{
+	void *pci_reg_base;
+	unsigned long memory_size;
+	memory_size = ppc_md.find_end_of_memory();
+
+	pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
+
+	/* Enable PCI I/O, Mem, and Busmaster cycles */
+	PCI_WRITEW(PCI_READW(PCI_COMMAND) |
+		   PCI_COMMAND_MEMORY |
+		   PCI_COMMAND_MASTER, PCI_COMMAND);
+
+	/* Disable region first */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
+
+	/* PLB starting addr: 0x00000000A0000000 */
+	PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
+
+	/* PCI start addr, 0xA0000000 (PCI Address) */
+	PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
+
+	/* Enable no pre-fetch, enable region */
+	PCI_WRITEL(((0xffffffff -
+		     (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
+		      BAMBOO_PCIL0_PMM0MA);
+
+	/* Disable region one */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
+
+	/* Disable region two */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
+	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
+
+	/* Now configure the PCI->PLB windows, we only use PTM1
+	 *
+	 * For Inbound flow, set the window size to all available memory
+	 * This is required because if size is smaller,
+	 * then Eth/PCI DD would fail as PCI card not able to access
+	 * the memory allocated by DD.
+	 */
+
+	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);	/* disabled region 1 */
+	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);	/* begin of address map */
+
+	memory_size = 1 << fls(memory_size - 1);
+
+	/* Size low + Enabled */
+	PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
+
+	eieio();
+	iounmap(pci_reg_base);
+}
+
+static void __init
+bamboo_setup_hose(void)
+{
+	unsigned int bar_response, bar;
+	struct pci_controller *hose;
+
+	bamboo_setup_pci();
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
+
+	pci_init_resource(&hose->io_resource,
+			BAMBOO_PCI_LOWER_IO,
+			BAMBOO_PCI_UPPER_IO,
+			IORESOURCE_IO,
+			"PCI host bridge");
+
+	pci_init_resource(&hose->mem_resources[0],
+			BAMBOO_PCI_LOWER_MEM,
+			BAMBOO_PCI_UPPER_MEM,
+			IORESOURCE_MEM,
+			"PCI host bridge");
+
+	ppc_md.pci_exclude_device = bamboo_exclude_device;
+
+	hose->io_space.start = BAMBOO_PCI_LOWER_IO;
+	hose->io_space.end = BAMBOO_PCI_UPPER_IO;
+	hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
+	hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
+	isa_io_base =
+		(unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
+	hose->io_base_virt = (void *)isa_io_base;
+
+	setup_indirect_pci(hose,
+			BAMBOO_PCI_CFGA_PLB32,
+			BAMBOO_PCI_CFGD_PLB32);
+	hose->set_cfg_type = 1;
+
+	/* Zero config bars */
+	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
+		early_write_config_dword(hose, hose->first_busno,
+					 PCI_FUNC(hose->first_busno), bar,
+					 0x00000000);
+		early_read_config_dword(hose, hose->first_busno,
+					PCI_FUNC(hose->first_busno), bar,
+					&bar_response);
+	}
+
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = bamboo_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+bamboo_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
+	port.irq = 0;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(0, &port);
+#endif
+
+	port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
+	port.irq = 1;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(1, &port);
+#endif
+
+	port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
+	port.irq = 3;
+	port.uartclk = clocks.uart2;
+	port.line = 2;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 2 failed\n");
+	}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	/* Configure debug serial access */
+	gen550_init(2, &port);
+#endif
+
+	port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
+	port.irq = 4;
+	port.uartclk = clocks.uart3;
+	port.line = 3;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 3 failed\n");
+	}
+}
+
+static void __init
+bamboo_setup_arch(void)
+{
+
+	bamboo_set_emacdata();
+
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* Setup TODC access */
+	TODC_INIT(TODC_TYPE_DS1743,
+			0,
+			0,
+			ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
+			8);
+
+	/* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCI host bridge */
+	bamboo_setup_hose();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	bamboo_early_serial_map();
+
+	/* Identify the system */
+	printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3)
+		__res = *(bd_t *)(r3 + KERNELBASE);
+
+
+	ibm44x_platform_init();
+
+	ppc_md.setup_arch = bamboo_setup_arch;
+	ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = bamboo_calibrate_decr;
+	ppc_md.time_init = todc_time_init;
+	ppc_md.set_rtc_time = todc_set_rtc_time;
+	ppc_md.get_rtc_time = todc_get_rtc_time;
+
+	ppc_md.nvram_read_val = todc_direct_read_val;
+	ppc_md.nvram_write_val = todc_direct_write_val;
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = bamboo_early_serial_map;
+#endif
+}
+
diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h
new file mode 100644
index 0000000..63d7145
--- /dev/null
+++ b/arch/ppc/platforms/4xx/bamboo.h
@@ -0,0 +1,136 @@
+/*
+ * arch/ppc/platforms/bamboo.h
+ *
+ * Bamboo board definitions
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ *
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_BAMBOO_H__
+#define __ASM_BAMBOO_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ibm440ep.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0		0x0EF600E00
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE			0xfff00000
+#define PIBS_MAC_BASE			(PIBS_FLASH_BASE+0xc0400)
+#define PIBS_MAC_SIZE			0x200
+#define PIBS_MAC_OFFSET			0x100
+
+/* Default clock rate */
+#define BAMBOO_TMRCLK			25000000
+
+/* RTC/NVRAM location */
+#define BAMBOO_RTC_ADDR			0x080000000ULL
+#define BAMBOO_RTC_SIZE			0x2000
+
+/* FPGA Registers */
+#define BAMBOO_FPGA_ADDR		0x080002000ULL
+
+#define BAMBOO_FPGA_CONFIG2_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x1)
+#define BAMBOO_FULL_DUPLEX_EN(x)	(x & 0x08)
+#define BAMBOO_FORCE_100Mbps(x)		(x & 0x04)
+#define BAMBOO_AUTONEGOTIATE(x)		(x & 0x02)
+
+#define BAMBOO_FPGA_SETTING_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x3)
+#define BAMBOO_BOOT_SMALL_FLASH(x)	(!(x & 0x80))
+#define BAMBOO_LARGE_FLASH_EN(x)	(!(x & 0x40))
+#define BAMBOO_BOOT_NAND_FLASH(x)	(!(x & 0x20))
+
+#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
+#define BAMBOO_SEL_MII(x)		(x & 0x80)
+#define BAMBOO_SEL_RMII(x)		(x & 0x40)
+#define BAMBOO_SEL_SMII(x)		(x & 0x20)
+
+/* Flash */
+#define BAMBOO_SMALL_FLASH_LOW		0x087f00000ULL
+#define BAMBOO_SMALL_FLASH_HIGH		0x0fff00000ULL
+#define BAMBOO_SMALL_FLASH_SIZE		0x100000
+#define BAMBOO_LARGE_FLASH_LOW		0x087800000ULL
+#define BAMBOO_LARGE_FLASH_HIGH1	0x0ff800000ULL
+#define BAMBOO_LARGE_FLASH_HIGH2	0x0ffc00000ULL
+#define BAMBOO_LARGE_FLASH_SIZE		0x400000
+#define BAMBOO_SRAM_LOW			0x087f00000ULL
+#define BAMBOO_SRAM_HIGH1		0x0fff00000ULL
+#define BAMBOO_SRAM_HIGH2		0x0ff800000ULL
+#define BAMBOO_SRAM_SIZE		0x100000
+#define BAMBOO_NAND_FLASH_REG_ADDR	0x090000000ULL
+#define BAMBOO_NAND_FLASH_REG_SIZE	0x2000
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE			4
+
+#define UART0_IO_BASE			0xEF600300
+#define UART1_IO_BASE			0xEF600400
+#define UART2_IO_BASE			0xEF600500
+#define UART3_IO_BASE			0xEF600600
+
+#define BASE_BAUD			33177600/3/16
+#define UART0_INT			0
+#define UART1_INT			1
+#define UART2_INT			3
+#define UART3_INT			4
+
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)		\
+	STD_UART_OP(3)
+
+/* PCI support */
+#define BAMBOO_PCI_CFGA_PLB32		0xeec00000
+#define BAMBOO_PCI_CFGD_PLB32		0xeec00004
+
+#define BAMBOO_PCI_IO_BASE		0x00000000e8000000ULL
+#define BAMBOO_PCI_IO_SIZE		0x00010000
+#define BAMBOO_PCI_MEM_OFFSET		0x00000000
+#define BAMBOO_PCI_PHY_MEM_BASE		0x00000000a0000000ULL
+
+#define BAMBOO_PCI_LOWER_IO		0x00000000
+#define BAMBOO_PCI_UPPER_IO		0x0000ffff
+#define BAMBOO_PCI_LOWER_MEM		0xa0000000
+#define BAMBOO_PCI_UPPER_MEM		0xafffffff
+#define BAMBOO_PCI_MEM_BASE		0xa0000000
+
+#define BAMBOO_PCIL0_BASE		0x00000000ef400000ULL
+#define BAMBOO_PCIL0_SIZE		0x40
+
+#define BAMBOO_PCIL0_PMM0LA		0x000
+#define BAMBOO_PCIL0_PMM0MA		0x004
+#define BAMBOO_PCIL0_PMM0PCILA		0x008
+#define BAMBOO_PCIL0_PMM0PCIHA		0x00C
+#define BAMBOO_PCIL0_PMM1LA		0x010
+#define BAMBOO_PCIL0_PMM1MA		0x014
+#define BAMBOO_PCIL0_PMM1PCILA		0x018
+#define BAMBOO_PCIL0_PMM1PCIHA		0x01C
+#define BAMBOO_PCIL0_PMM2LA		0x020
+#define BAMBOO_PCIL0_PMM2MA		0x024
+#define BAMBOO_PCIL0_PMM2PCILA		0x028
+#define BAMBOO_PCIL0_PMM2PCIHA		0x02C
+#define BAMBOO_PCIL0_PTM1MS		0x030
+#define BAMBOO_PCIL0_PTM1LA		0x034
+#define BAMBOO_PCIL0_PTM2MS		0x038
+#define BAMBOO_PCIL0_PTM2LA		0x03C
+
+#endif                          /* __ASM_BAMBOO_H__ */
+#endif                          /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index cd11734..509e69a 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -7,7 +7,7 @@
  * Copyright 2002-2005 MontaVista Software Inc.
  *
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
+ * Copyright (c) 2003-2005 Zultys Technologies
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -50,6 +50,7 @@
 #include <asm/bootinfo.h>
 #include <asm/ppc4xx_pic.h>
 #include <asm/ppcboot.h>
+#include <asm/tlbflush.h>
 
 #include <syslib/gen550.h>
 #include <syslib/ibm440gp_common.h>
@@ -248,6 +249,9 @@
 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 	/* Configure debug serial access */
 	gen550_init(0, &port);
+
+	/* Purge TLB entry added in head_44x.S for early serial access */
+	_tlbie(UART0_IO_BASE);
 #endif
 
 	port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
index 47c391c..d08faa4 100644
--- a/arch/ppc/platforms/4xx/ebony.h
+++ b/arch/ppc/platforms/4xx/ebony.h
@@ -56,9 +56,18 @@
  * Serial port defines
  */
 
-/* OpenBIOS defined UART mappings, used before early_serial_setup */
+#if defined(__BOOTER__)
+/* OpenBIOS defined UART mappings, used by bootloader shim */
 #define UART0_IO_BASE	0xE0000200
 #define UART1_IO_BASE	0xE0000300
+#else
+/* head_44x.S created UART mapping, used before early_serial_setup.
+ * We cannot use default OpenBIOS UART mappings because they
+ * don't work for configurations with more than 512M RAM.    --ebs
+ */
+#define UART0_IO_BASE	0xF0000200
+#define UART1_IO_BASE	0xF0000300
+#endif
 
 /* external Epson SG-615P */
 #define BASE_BAUD	691200
@@ -66,7 +75,7 @@
 #define STD_UART_OP(num)					\
 	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
 		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: UART##num##_IO_BASE,		\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
 		io_type: SERIAL_IO_MEM},
 
 #define SERIAL_PORT_DFNS	\
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
new file mode 100644
index 0000000..284da01
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440ep.c
@@ -0,0 +1,220 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440ep.c
+ *
+ * PPC440EP I/O descriptions
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ibm440ep.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm440ep_emac0_def = {
+	.rgmii_idx	= -1,           /* No RGMII */
+	.rgmii_mux	= -1,           /* No RGMII */
+	.zmii_idx       = 0,            /* ZMII device index */
+	.zmii_mux       = 0,            /* ZMII input of this EMAC */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 0,            /* MAL rx channel number */
+	.mal_tx_chan    = 0,            /* MAL tx channel number */
+	.wol_irq        = 61,		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,           /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm440ep_emac1_def = {
+	.rgmii_idx	= -1,           /* No RGMII */
+	.rgmii_mux	= -1,           /* No RGMII */
+	.zmii_idx       = 0,            /* ZMII device index */
+	.zmii_mux       = 1,            /* ZMII input of this EMAC */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 1,            /* MAL rx channel number */
+	.mal_tx_chan    = 2,            /* MAL tx channel number */
+	.wol_irq        = 63,  		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,           /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm440ep_mal0_def = {
+	.num_tx_chans   = 4,  		/* Number of TX channels */
+	.num_rx_chans   = 2,    	/* Number of RX channels */
+	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
+	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
+	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
+	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
+	.serr_irq	= 32,		/* MAL System Error IRQ    */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm440ep_iic0_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibm440ep_iic1_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_OPB,
+	  .index	= 0,
+	  .paddr	= 0x0EF600000ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 0,
+	  .paddr	= PPC440EP_UART0_ADDR,
+	  .irq		= UART0_INT,
+	  .pm		= IBM_CPM_UART0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 1,
+	  .paddr	= PPC440EP_UART1_ADDR,
+	  .irq		= UART1_INT,
+	  .pm		= IBM_CPM_UART1,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 2,
+	  .paddr	= PPC440EP_UART2_ADDR,
+	  .irq		= UART2_INT,
+	  .pm		= IBM_CPM_UART2,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 3,
+	  .paddr	= PPC440EP_UART3_ADDR,
+	  .irq		= UART3_INT,
+	  .pm		= IBM_CPM_UART3,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 0,
+	  .paddr	= 0x0EF600700ULL,
+	  .irq		= 2,
+	  .pm		= IBM_CPM_IIC0,
+	  .additions	= &ibm440ep_iic0_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 1,
+	  .paddr	= 0x0EF600800ULL,
+	  .irq		= 7,
+	  .pm		= IBM_CPM_IIC1,
+	  .additions	= &ibm440ep_iic1_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 0,
+	  .paddr	= 0x0EF600B00ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= IBM_CPM_GPIO0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 1,
+	  .paddr	= 0x0EF600C00ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_MAL,
+	  .paddr	= OCP_PADDR_NA,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ibm440ep_mal0_def,
+	  .show		= &ocp_show_mal_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 0,
+	  .paddr	= 0x0EF600E00ULL,
+	  .irq		= 60,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ibm440ep_emac0_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 1,
+	  .paddr	= 0x0EF600F00ULL,
+	  .irq		= 62,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ibm440ep_emac1_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_ZMII,
+	  .paddr	= 0x0EF600D00ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+	{ .polarity	= 0xffbffe03,
+	  .triggering   = 0xfffffe00,
+	  .ext_irq_mask = 0x000001fc,	/* IRQ0 - IRQ6 */
+	},
+	{ .polarity	= 0xffffc6ef,
+	  .triggering	= 0xffffc7ff,
+	  .ext_irq_mask = 0x00003800,	/* IRQ7 - IRQ9 */
+	},
+};
+
+static struct resource usb_gadget_resources[] = {
+	[0] = {
+		.start	= 0x050000100ULL,
+		.end 	= 0x05000017FULL,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 55,
+		.end	= 55,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 dma_mask = 0xffffffffULL;
+
+static struct platform_device usb_gadget_device = {
+	.name		= "musbhsfc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(usb_gadget_resources),
+	.resource       = usb_gadget_resources,
+	.dev		= {
+		.dma_mask = &dma_mask,
+		.coherent_dma_mask = 0xffffffffULL,
+	}
+};
+
+static struct platform_device *ibm440ep_devs[] __initdata = {
+	&usb_gadget_device,
+};
+
+static int __init
+ibm440ep_platform_add_devices(void)
+{
+	return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
+}
+arch_initcall(ibm440ep_platform_add_devices);
+
diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h
new file mode 100644
index 0000000..97c80b8
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440ep.h
@@ -0,0 +1,76 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440ep.h
+ *
+ * PPC440EP definitions
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ *
+ * Copyright 2002 Roland Dreier
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_IBM440EP_H
+#define __PPC_PLATFORMS_IBM440EP_H
+
+#include <linux/config.h>
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440EP_UART0_ADDR		0x0EF600300
+#define PPC440EP_UART1_ADDR		0x0EF600400
+#define PPC440EP_UART2_ADDR		0x0EF600500
+#define PPC440EP_UART3_ADDR		0x0EF600600
+#define UART0_INT			0
+#define UART1_INT			1
+#define UART2_INT			3
+#define UART3_INT			4
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
+#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
+#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
+#define IBM_CPM_USB1H		0x08000000	/* USB 1.1 Host */
+#define IBM_CPM_FPU		0x04000000	/* floating point unit */
+#define IBM_CPM_CPU		0x02000000	/* processor core */
+#define IBM_CPM_DMA		0x01000000	/* DMA controller */
+#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
+#define IBM_CPM_EBC		0x00200000	/* External Bus Controller */
+#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
+#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
+#define IBM_CPM_PLB4		0x00040000	/* PLB4 bus arbiter */
+#define IBM_CPM_PLB4x3		0x00020000	/* PLB4 to PLB3 bridge controller */
+#define IBM_CPM_PLB3x4		0x00010000	/* PLB3 to PLB4 bridge controller */
+#define IBM_CPM_PLB3		0x00008000	/* PLB3 bus arbiter */
+#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
+#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
+#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
+#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
+#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
+#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
+#define IBM_CPM_EMAC0		0x00000020	/* ethernet port 0 */
+#define IBM_CPM_EMAC1		0x00000010	/* ethernet port 1 */
+#define IBM_CPM_UART2		0x00000008	/* serial port 2 */
+#define IBM_CPM_UART3		0x00000004	/* serial port 3 */
+#define IBM_CPM_USB2D		0x00000002	/* USB 2.0 Device */
+#define IBM_CPM_USB2H		0x00000001	/* USB 2.0 Host */
+
+#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
+				| IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
+				| IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
+				| IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
+				| IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
+				| IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
+
+
+#endif /* __PPC_PLATFORMS_IBM440EP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 5f82a6b..8fc34a3 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -48,6 +48,7 @@
 #include <asm/bootinfo.h>
 #include <asm/ppc4xx_pic.h>
 #include <asm/ppcboot.h>
+#include <asm/tlbflush.h>
 
 #include <syslib/gen550.h>
 #include <syslib/ibm440gx_common.h>
@@ -266,6 +267,9 @@
 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 	/* Configure debug serial access */
 	gen550_init(0, &port);
+
+	/* Purge TLB entry added in head_44x.S for early serial access */
+	_tlbie(UART0_IO_BASE);
 #endif
 
 	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
index 202dc82..3325115 100644
--- a/arch/ppc/platforms/4xx/ocotea.h
+++ b/arch/ppc/platforms/4xx/ocotea.h
@@ -55,15 +55,24 @@
  */
 #define RS_TABLE_SIZE	2
 
-/* OpenBIOS defined UART mappings, used before early_serial_setup */
+#if defined(__BOOTER__)
+/* OpenBIOS defined UART mappings, used by bootloader shim */
 #define UART0_IO_BASE	0xE0000200
 #define UART1_IO_BASE	0xE0000300
+#else
+/* head_44x.S created UART mapping, used before early_serial_setup.
+ * We cannot use default OpenBIOS UART mappings because they
+ * don't work for configurations with more than 512M RAM.    --ebs
+ */
+#define UART0_IO_BASE	0xF0000200
+#define UART1_IO_BASE	0xF0000300
+#endif
 
 #define BASE_BAUD	11059200/16
 #define STD_UART_OP(num)					\
 	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
 		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: UART##num##_IO_BASE,		\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
 		io_type: SERIAL_IO_MEM},
 
 #define SERIAL_PORT_DFNS	\
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index dec5bf4..220a65a 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -11,6 +11,7 @@
 obj-$(CONFIG_PPC_OCP)		+= ocp.o
 obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
 obj-$(CONFIG_44x)		+= ibm44x_common.o
+obj-$(CONFIG_440EP)		+= ibm440gx_common.o
 obj-$(CONFIG_440GP)		+= ibm440gp_common.o
 obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
@@ -44,6 +45,7 @@
 obj-$(CONFIG_PPC_PREP)		+= open_pic.o indirect_pci.o i8259.o todc_time.o
 obj-$(CONFIG_ADIR)		+= i8259.o indirect_pci.o pci_auto.o \
 					todc_time.o
+obj-$(CONFIG_BAMBOO)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
 obj-$(CONFIG_EBONY)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
index 4ad85e0..d4776af 100644
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ b/arch/ppc/syslib/ibm440gx_common.c
@@ -34,6 +34,10 @@
 	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
 	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
 	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
+#ifdef CONFIG_440EP
+	u32 uart2 = SDR_READ(DCRN_SDR_UART2);
+	u32 uart3 = SDR_READ(DCRN_SDR_UART3);
+#endif
 
 	/* Dividers */
 	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
@@ -96,6 +100,17 @@
 		p->uart1 = ser_clk;
 	else
 		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
+#ifdef CONFIG_440EP
+	if (uart2 & 0x00800000)
+		p->uart2 = ser_clk;
+	else
+		p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
+
+	if (uart3 & 0x00800000)
+		p->uart3 = ser_clk;
+	else
+		p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
+#endif
 }
 
 /* Issue L2C diagnostic command */
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
index b14eb60..c16b6a5 100644
--- a/arch/ppc/syslib/ibm44x_common.h
+++ b/arch/ppc/syslib/ibm44x_common.h
@@ -29,6 +29,10 @@
 	unsigned int ebc;	/* PerClk */
 	unsigned int uart0;
 	unsigned int uart1;
+#ifdef CONFIG_440EP
+	unsigned int uart2;
+	unsigned int uart3;
+#endif
 };
 
 /* common 44x platform init */
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
index 74fc3bc..784f56d 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/ppc64/kernel/head.S
@@ -2071,7 +2071,7 @@
 	blr
 #endif
 
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES)
+#if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES))
 _GLOBAL(smp_release_cpus)
 	/* All secondary cpus are spinning on a common
 	 * spinloop, release them all now so they can start
diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c
index fdb2fc6..4775f12 100644
--- a/arch/ppc64/kernel/machine_kexec.c
+++ b/arch/ppc64/kernel/machine_kexec.c
@@ -185,7 +185,7 @@
 void kexec_smp_down(void *arg)
 {
 	if (ppc_md.cpu_irq_down)
-		ppc_md.cpu_irq_down();
+		ppc_md.cpu_irq_down(1);
 
 	local_irq_disable();
 	kexec_smp_wait();
@@ -232,7 +232,7 @@
 
 	/* after we tell the others to go down */
 	if (ppc_md.cpu_irq_down)
-		ppc_md.cpu_irq_down();
+		ppc_md.cpu_irq_down(0);
 
 	put_cpu();
 
@@ -243,15 +243,19 @@
 
 static void kexec_prepare_cpus(void)
 {
+	extern void smp_release_cpus(void);
 	/*
 	 * move the secondarys to us so that we can copy
 	 * the new kernel 0-0x100 safely
 	 *
 	 * do this if kexec in setup.c ?
+	 *
+	 * We need to release the cpus if we are ever going from an
+	 * UP to an SMP kernel.
 	 */
-	smp_relase_cpus();
+	smp_release_cpus();
 	if (ppc_md.cpu_irq_down)
-		ppc_md.cpu_irq_down();
+		ppc_md.cpu_irq_down(0);
 	local_irq_disable();
 }
 
diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S
index 59f4f99..a05b50b 100644
--- a/arch/ppc64/kernel/misc.S
+++ b/arch/ppc64/kernel/misc.S
@@ -1129,6 +1129,9 @@
 	.llong .compat_sys_waitid
 	.llong .sys32_ioprio_set
 	.llong .sys32_ioprio_get
+	.llong .sys_inotify_init	/* 275 */
+	.llong .sys_inotify_add_watch
+	.llong .sys_inotify_rm_watch
 
 	.balign 8
 _GLOBAL(sys_call_table)
@@ -1407,3 +1410,6 @@
 	.llong .sys_waitid
 	.llong .sys_ioprio_set
 	.llong .sys_ioprio_get
+	.llong .sys_inotify_init	/* 275 */
+	.llong .sys_inotify_add_watch
+	.llong .sys_inotify_rm_watch
diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c
index e8fbab1..cc262a0 100644
--- a/arch/ppc64/kernel/mpic.c
+++ b/arch/ppc64/kernel/mpic.c
@@ -794,10 +794,10 @@
 
 /*
  * XXX: someone who knows mpic should check this.
- * do we need to eoi the ipi here (see xics comments)?
+ * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
  * or can we reset the mpic in the new kernel?
  */
-void mpic_teardown_this_cpu(void)
+void mpic_teardown_this_cpu(int secondary)
 {
 	struct mpic *mpic = mpic_primary;
 	unsigned long flags;
diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h
index 99fbbc9..ca78a7f 100644
--- a/arch/ppc64/kernel/mpic.h
+++ b/arch/ppc64/kernel/mpic.h
@@ -256,7 +256,7 @@
 extern void mpic_setup_this_cpu(void);
 
 /* Clean up for kexec (or cpu offline or ...) */
-extern void mpic_teardown_this_cpu(void);
+extern void mpic_teardown_this_cpu(int secondary);
 
 /* Request IPIs on primary mpic */
 extern void mpic_request_ipis(void);
diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c
index 47727a6..5aca01d 100644
--- a/arch/ppc64/kernel/prom.c
+++ b/arch/ppc64/kernel/prom.c
@@ -916,6 +916,7 @@
 		}
 	}
 
+#ifdef CONFIG_ALTIVEC
 	/* Check if we have a VMX and eventually update CPU features */
 	prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL);
 	if (prop && (*prop) > 0) {
@@ -929,6 +930,7 @@
 		cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC;
 		cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC;
 	}
+#endif /* CONFIG_ALTIVEC */
 
 	/*
 	 * Check for an SMT capable CPU and set the CPU feature. We do
diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c
index 677c445..d9dc6f2 100644
--- a/arch/ppc64/kernel/xics.c
+++ b/arch/ppc64/kernel/xics.c
@@ -647,29 +647,30 @@
 	}
 }
 
-void xics_teardown_cpu(void)
+void xics_teardown_cpu(int secondary)
 {
 	int cpu = smp_processor_id();
-	int status;
 
 	ops->cppr_info(cpu, 0x00);
 	iosync();
 
 	/*
-	 * we need to EOI the IPI if we got here from kexec down IPI
-	 *
-	 * xics doesn't care if we duplicate an EOI as long as we
-	 * don't EOI and raise priority.
-	 *
-	 * probably need to check all the other interrupts too
-	 * should we be flagging idle loop instead?
-	 * or creating some task to be scheduled?
+	 * Some machines need to have at least one cpu in the GIQ,
+	 * so leave the master cpu in the group.
 	 */
-	ops->xirr_info_set(cpu, XICS_IPI);
-
-	status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
-	WARN_ON(status != 0);
+	if (secondary) {
+		/*
+		 * we need to EOI the IPI if we got here from kexec down IPI
+		 *
+		 * probably need to check all the other interrupts too
+		 * should we be flagging idle loop instead?
+		 * or creating some task to be scheduled?
+		 */
+		ops->xirr_info_set(cpu, XICS_IPI);
+		rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+			(1UL << interrupt_server_size) - 1 -
+			default_distrib_server, 0);
+	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/ppc64/mm/numa.c b/arch/ppc64/mm/numa.c
index cafd91a..0b191f2 100644
--- a/arch/ppc64/mm/numa.c
+++ b/arch/ppc64/mm/numa.c
@@ -647,7 +647,12 @@
 new_range:
 			mem_start = read_n_cells(addr_cells, &memcell_buf);
 			mem_size = read_n_cells(size_cells, &memcell_buf);
-			numa_domain = numa_enabled ? of_node_numa_domain(memory) : 0;
+			if (numa_enabled) {
+				numa_domain = of_node_numa_domain(memory);
+				if (numa_domain  >= MAX_NUMNODES)
+					numa_domain = 0;
+			} else
+				numa_domain =  0;
 
 			if (numa_domain != nid)
 				continue;
diff --git a/arch/ppc64/xmon/xmon.c b/arch/ppc64/xmon/xmon.c
index 7f6e13a..0553943 100644
--- a/arch/ppc64/xmon/xmon.c
+++ b/arch/ppc64/xmon/xmon.c
@@ -329,13 +329,16 @@
 		printf("cpu 0x%x: Exception %lx %s in xmon, "
 		       "returning to main loop\n",
 		       cpu, regs->trap, getvecname(TRAP(regs)));
+		release_output_lock();
 		longjmp(xmon_fault_jmp[cpu], 1);
 	}
 
 	if (setjmp(recurse_jmp) != 0) {
 		if (!in_xmon || !xmon_gate) {
+			get_output_lock();
 			printf("xmon: WARNING: bad recursive fault "
 			       "on cpu 0x%x\n", cpu);
+			release_output_lock();
 			goto waiting;
 		}
 		secondary = !(xmon_taken && cpu == xmon_owner);
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index c067435..c9f2f60 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -232,7 +232,11 @@
 	ry = -1;
 	asm volatile(
 			"diag %1,%0,0xDC\n\t"
-			: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
+			: "=d" (ry)
+			: "d" (&appldata_parameter_list),
+			  "m" (appldata_parameter_list),
+			  "m" (appldata_product_id)
+			: "cc");
 	return (int) ry;
 }
 /************************ timer, work, DIAG <END> ****************************/
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 89850b2..0865251 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc3
-# Fri Apr 22 15:30:58 2005
+# Linux kernel version: 2.6.13-rc4
+# Fri Jul 29 14:49:30 2005
 #
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -23,10 +23,11 @@
 CONFIG_LOCALVERSION=""
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
@@ -36,6 +37,8 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -51,9 +54,10 @@
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
@@ -81,8 +85,15 @@
 # CONFIG_MARCH_Z990 is not set
 CONFIG_PACK_STACK=y
 # CONFIG_SMALL_STACK is not set
-# CONFIG_CHECK_STACK is not set
+CONFIG_CHECK_STACK=y
+CONFIG_STACK_GUARD=256
 # CONFIG_WARN_STACK is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 
 #
 # I/O subsystem configuration
@@ -95,7 +106,7 @@
 #
 # Misc
 #
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
 CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
@@ -105,9 +116,110 @@
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
-# CONFIG_VIRT_TIMER is not set
+CONFIG_VIRT_TIMER=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+# CONFIG_APPLDATA_BASE is not set
 CONFIG_NO_IDLE_HZ=y
 CONFIG_NO_IDLE_HZ_INIT=y
+# CONFIG_KEXEC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_INGRESS is not set
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 # CONFIG_PCMCIA is not set
 
 #
@@ -133,6 +245,7 @@
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -205,7 +318,13 @@
 # CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Character device drivers
@@ -231,7 +350,8 @@
 CONFIG_SCLP=y
 CONFIG_SCLP_TTY=y
 CONFIG_SCLP_CONSOLE=y
-# CONFIG_SCLP_VT220_TTY is not set
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
 CONFIG_SCLP_CPI=m
 CONFIG_S390_TAPE=m
 
@@ -255,105 +375,8 @@
 CONFIG_Z90CRYPT=m
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -411,12 +434,15 @@
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -426,6 +452,7 @@
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -433,6 +460,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -457,7 +485,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -486,15 +513,18 @@
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -544,11 +574,12 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 
 #
 # Security options
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 799a98e..23fe94e 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1449,3 +1449,29 @@
 	llgtr	%r4,%r4			# struct kexec_segment *
 	llgfr	%r5,%r5			# unsigned long
 	jg	compat_sys_kexec_load
+
+	.globl	sys_ioprio_set_wrapper
+sys_ioprio_set_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	lgfr	%r4,%r4			# int
+	jg	sys_ioprio_set
+
+	.globl	sys_ioprio_get_wrapper
+sys_ioprio_get_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	jg	sys_ioprio_get
+
+	.globl	sys_inotify_add_watch_wrapper
+sys_inotify_add_watch_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# const char *
+	llgfr	%r4,%r4			# u32
+	jg	sys_inotify_add_watch
+
+	.globl	sys_inotify_rm_watch_wrapper
+sys_inotify_rm_watch_wrapper:
+	lgfr	%r2,%r2			# int
+	llgfr	%r3,%r3			# u32
+	jg	sys_inotify_rm_watch
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index d12cff1..2710e66 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -346,6 +346,13 @@
         la    %r2,.Lreset              
         lhi   %r3,26
 	diag  %r2,%r3,8
+	la    %r5,.Lirb
+	stsch 0(%r5)			       # check if irq is pending
+	tm    30(%r5),0x0f		       # by verifying if any of the
+	bnz   .Lwaitforirq		       # activity or status control
+	tm    31(%r5),0xff		       # bits is set in the schib
+	bz    .Lnoreset
+.Lwaitforirq:
 	mvc   0x78(8),.Lrdrnewpsw              # set up IO interrupt psw
 .Lwaitrdrirq:
 	lpsw  .Lrdrwaitpsw
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 10bc592..9a8263a 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -345,6 +345,13 @@
         la    %r2,.Lreset              
         lhi   %r3,26
 	diag  %r2,%r3,8
+	la    %r5,.Lirb
+	stsch 0(%r5)			       # check if irq is pending
+	tm    30(%r5),0x0f		       # by verifying if any of the
+	bnz   .Lwaitforirq		       # activity or status control
+	tm    31(%r5),0xff		       # bits is set in the schib
+	bz    .Lnoreset
+.Lwaitforirq:
 	mvc   0x78(8),.Lrdrnewpsw	       # set up IO interrupt psw
 .Lwaitrdrirq:
 	lpsw  .Lrdrwaitpsw
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index 2721c3a..5aa71b0 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -70,6 +70,8 @@
 	for (;;);
 }
 
+extern void pfault_fini(void);
+
 static void
 kexec_halt_all_cpus(void *kernel_image)
 {
@@ -78,6 +80,11 @@
 	struct kimage *image;
 	relocate_kernel_t data_mover;
 
+#ifdef CONFIG_PFAULT
+	if (MACHINE_IS_VM)
+		pfault_fini();
+#endif
+
 	if (atomic_compare_and_swap(-1, smp_processor_id(), &cpuid))
 		signal_processor(smp_processor_id(), sigp_stop);
 
diff --git a/arch/s390/kernel/relocate_kernel.S b/arch/s390/kernel/relocate_kernel.S
index d5e4a62..2a25ec7 100644
--- a/arch/s390/kernel/relocate_kernel.S
+++ b/arch/s390/kernel/relocate_kernel.S
@@ -4,6 +4,7 @@
  * (C) Copyright IBM Corp. 2005
  *
  * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *	      Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  */
 
@@ -25,8 +26,31 @@
 	relocate_kernel:
 		basr	%r13,0		#base address
 	.base:
-		spx	zero64-.base(%r13)	#absolute addressing mode
 		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQ (external)
+		spx	zero64-.base(%r13)	#absolute addressing mode
+		stctl	%c0,%c15,ctlregs-.base(%r13)
+		stm	%r0,%r15,gprregs-.base(%r13)
+		la	%r1,load_psw-.base(%r13)
+		mvc     0(8,%r0),0(%r1)
+		la	%r0,.back-.base(%r13)
+		st	%r0,4(%r0)
+		oi	4(%r0),0x80
+		mvc	0x68(8,%r0),0(%r1)
+		la	%r0,.back_pgm-.base(%r13)
+		st	%r0,0x6c(%r0)
+		oi	0x6c(%r0),0x80
+		lhi	%r0,0
+		diag	%r0,%r0,0x308
+	.back:
+		basr	%r13,0
+	.back_base:
+		oi	have_diag308-.back_base(%r13),0x01
+		lctl	%c0,%c15,ctlregs-.back_base(%r13)
+		lm	%r0,%r15,gprregs-.back_base(%r13)
+		j	.start_reloc
+	.back_pgm:
+		lm	%r0,%r15,gprregs-.base(%r13)
+	.start_reloc:
 		lhi	%r10,-1		#preparing the mask
 		sll	%r10,12		#shift it such that it becomes 0xf000
 	.top:
@@ -63,6 +87,10 @@
 		o	%r3,4(%r4)	#or load address into psw
 		st	%r3,4(%r4)
 		mvc	0(8,%r0),0(%r4)	#copy psw to absolute address 0
+		tm	have_diag308-.base(%r13),0x01
+		jno	.no_diag308
+		diag	%r0,%r0,0x308
+	.no_diag308:
 		sr	%r1,%r1		#clear %r1
 		sr	%r2,%r2		#clear %r2
 		sigp	%r1,%r2,0x12	#set cpuid to zero
@@ -75,6 +103,17 @@
 		.long	0x00080000,0x80000000
 	sys_msk:
 		.quad	0
+	ctlregs:
+		.rept	16
+		.long	0
+		.endr
+	gprregs:
+		.rept	16
+		.long	0
+		.endr
+	have_diag308:
+		.byte	0
+		.align	8
 	relocate_kernel_end:
 	.globl	relocate_kernel_len
 	relocate_kernel_len:
diff --git a/arch/s390/kernel/relocate_kernel64.S b/arch/s390/kernel/relocate_kernel64.S
index 96290cc..8cdb86e 100644
--- a/arch/s390/kernel/relocate_kernel64.S
+++ b/arch/s390/kernel/relocate_kernel64.S
@@ -4,6 +4,7 @@
  * (C) Copyright IBM Corp. 2005
  *
  * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *	      Heiko Carstens <heiko.carstens@de.ibm.com>
  *
  */
 
@@ -26,8 +27,34 @@
 	relocate_kernel:
 		basr	%r13,0		#base address
 	.base:
+		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQs
 		spx	zero64-.base(%r13)	#absolute addressing mode
-		stnsm	sys_msk-.base(%r13),0xf8	#disable DAT and IRQ (external)
+		stctg	%c0,%c15,ctlregs-.base(%r13)
+		stmg	%r0,%r15,gprregs-.base(%r13)
+		lghi	%r0,3
+		sllg	%r0,%r0,31
+		stg	%r0,0x1d0(%r0)
+		la	%r0,.back_pgm-.base(%r13)
+		stg	%r0,0x1d8(%r0)
+		la	%r1,load_psw-.base(%r13)
+		mvc     0(8,%r0),0(%r1)
+		la	%r0,.back-.base(%r13)
+		st	%r0,4(%r0)
+		oi	4(%r0),0x80
+		lghi	%r0,0
+		diag	%r0,%r0,0x308
+	.back:
+		lhi	%r1,1		#mode 1 = esame
+		sigp	%r1,%r0,0x12	#switch to esame mode
+		sam64			#switch to 64 bit addressing mode
+		basr	%r13,0
+	.back_base:
+		oi	have_diag308-.back_base(%r13),0x01
+		lctlg	%c0,%c15,ctlregs-.back_base(%r13)
+		lmg	%r0,%r15,gprregs-.back_base(%r13)
+		j	.top
+	.back_pgm:
+		lmg	%r0,%r15,gprregs-.base(%r13)
 	.top:
 		lghi	%r7,4096	#load PAGE_SIZE in r7
 		lghi	%r9,4096	#load PAGE_SIZE in r9
@@ -62,6 +89,10 @@
 		o	%r3,4(%r4)	#or load address into psw
 		st	%r3,4(%r4)
 		mvc     0(8,%r0),0(%r4)	#copy psw to absolute address 0
+		tm	have_diag308-.base(%r13),0x01
+		jno	.no_diag308
+		diag	%r0,%r0,0x308
+	.no_diag308:
 		sam31			#31 bit mode
 		sr      %r1,%r1		#erase register r1
 		sr      %r2,%r2		#erase register r2
@@ -75,8 +106,18 @@
 		.long	0x00080000,0x80000000
 	sys_msk:
 		.quad	0
+	ctlregs:
+		.rept	16
+		.quad	0
+		.endr
+	gprregs:
+		.rept	16
+		.quad	0
+		.endr
+	have_diag308:
+		.byte	0
+		.align	8
 	relocate_kernel_end:
 	.globl	relocate_kernel_len
 	relocate_kernel_len:
 		.quad	relocate_kernel_end - relocate_kernel
-
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index da77f00..85222fe 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -537,7 +537,8 @@
 #endif
 #ifdef CONFIG_PFAULT
 	/* Enable pfault pseudo page faults on this cpu. */
-	pfault_init();
+	if (MACHINE_IS_VM)
+		pfault_init();
 #endif
 	/* Mark this cpu as online */
 	cpu_set(smp_processor_id(), cpu_online_map);
@@ -690,7 +691,8 @@
 
 #ifdef CONFIG_PFAULT
 	/* Disable pfault pseudo page faults on this cpu. */
-	pfault_fini();
+	if (MACHINE_IS_VM)
+		pfault_fini();
 #endif
 
 	/* disable all external interrupts */
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index a8668af..426d7ca 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -290,3 +290,8 @@
 SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper)
 SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl)		/* 280 */
 SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper)
+SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
+SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
+SYSCALL(sys_inotify_init,sys_inotify_init,sys_inotify_init)
+SYSCALL(sys_inotify_add_watch,sys_inotify_add_watch,sys_inotify_add_watch_wrapper)
+SYSCALL(sys_inotify_rm_watch,sys_inotify_rm_watch,sys_inotify_rm_watch_wrapper)
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index bc7b7be..6b8703e 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
+#include <linux/reboot.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -675,6 +676,19 @@
 	panic("Corrupt kernel stack, can't continue.");
 }
 
+#ifndef CONFIG_ARCH_S390X
+static int
+pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	if (MACHINE_IS_VM)
+		cpcmd("SET PAGEX OFF", NULL, 0, NULL);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block pagex_reboot_notifier = {
+	.notifier_call = &pagex_reboot_event,
+};
+#endif
 
 /* init is done in lowcore.S and head.S */
 
@@ -735,6 +749,7 @@
 						    &ext_int_pfault);
 #endif
 #ifndef CONFIG_ARCH_S390X
+		register_reboot_notifier(&pagex_reboot_notifier);
 		cpcmd("SET PAGEX ON", NULL, 0, NULL);
 #endif
 	}
diff --git a/arch/sh64/mm/fault.c b/arch/sh64/mm/fault.c
index a249328..f08d0ea 100644
--- a/arch/sh64/mm/fault.c
+++ b/arch/sh64/mm/fault.c
@@ -223,13 +223,13 @@
 	 */
 survive:
 	switch (handle_mm_fault(mm, vma, address, writeaccess)) {
-	case 1:
+	case VM_FAULT_MINOR:
 		tsk->min_flt++;
 		break;
-	case 2:
+	case VM_FAULT_MAJOR:
 		tsk->maj_flt++;
 		break;
-	case 0:
+	case VM_FAULT_SIGBUS:
 		goto do_sigbus;
 	default:
 		goto out_of_memory;
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index d6c31a9..de17d4c 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -19,6 +19,8 @@
 
 LDFLAGS_pcap.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libpcap.a)
 
+targets := pcap_kern.o pcap_user.o
+
 $(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
 	$(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_pcap.o)
 #XXX: The call below does not work because the flags are added before the
@@ -26,7 +28,7 @@
 #$(call if_changed,ld)
 
 # When the above is fixed, don't forget to add this too!
-#targets := $(obj)/pcap.o
+#targets += $(obj)/pcap.o
 
 obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
 obj-$(CONFIG_SSL) += ssl.o
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 404de41..c190c24 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -557,7 +557,7 @@
 
 	ent = create_proc_entry("mconsole", S_IFREG | 0200, NULL);
 	if(ent == NULL){
-		printk("create_proc_mconsole : create_proc_entry failed\n");
+		printk(KERN_INFO "create_proc_mconsole : create_proc_entry failed\n");
 		return(0);
 	}
 
diff --git a/arch/um/kernel/exitcode.c b/arch/um/kernel/exitcode.c
index 0ea87f2..d21ebad 100644
--- a/arch/um/kernel/exitcode.c
+++ b/arch/um/kernel/exitcode.c
@@ -48,7 +48,7 @@
 
 	ent = create_proc_entry("exitcode", 0600, &proc_root);
 	if(ent == NULL){
-		printk("make_proc_exitcode : Failed to register "
+		printk(KERN_WARNING "make_proc_exitcode : Failed to register "
 		       "/proc/exitcode\n");
 		return(0);
 	}
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 8b01a55..67acd92 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -131,7 +131,7 @@
 	return(arg.pid);
 }
 
-static int ptrace_child(void)
+static int ptrace_child(void *arg)
 {
 	int ret;
 	int pid = os_getpid(), ppid = getppid();
@@ -160,16 +160,20 @@
 	_exit(ret);
 }
 
-static int start_ptraced_child(void)
+static int start_ptraced_child(void **stack_out)
 {
+	void *stack;
+	unsigned long sp;
 	int pid, n, status;
 	
-	pid = fork();
-	if(pid == 0)
-		ptrace_child();
-
+	stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
+		     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+	if(stack == MAP_FAILED)
+		panic("check_ptrace : mmap failed, errno = %d", errno);
+	sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
+	pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
 	if(pid < 0)
-		panic("check_ptrace : fork failed, errno = %d", errno);
+		panic("check_ptrace : clone failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
 	if(n < 0)
 		panic("check_ptrace : wait failed, errno = %d", errno);
@@ -177,6 +181,7 @@
 		panic("check_ptrace : expected SIGSTOP, got status = %d",
 		      status);
 
+	*stack_out = stack;
 	return(pid);
 }
 
@@ -184,12 +189,12 @@
  * just avoid using sysemu, not panic, but only if SYSEMU features are broken.
  * So only for SYSEMU features we test mustpanic, while normal host features
  * must work anyway!*/
-static int stop_ptraced_child(int pid, int exitcode, int mustexit)
+static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
 {
 	int status, n, ret = 0;
 
 	if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-		panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
+		panic("check_ptrace : ptrace failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, 0));
 	if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
 		int exit_with = WEXITSTATUS(status);
@@ -200,13 +205,15 @@
 		printk("check_ptrace : child exited with exitcode %d, while "
 		      "expecting %d; status 0x%x", exit_with,
 		      exitcode, status);
-		if (mustexit)
+		if (mustpanic)
 			panic("\n");
 		else
 			printk("\n");
 		ret = -1;
 	}
 
+	if(munmap(stack, PAGE_SIZE) < 0)
+		panic("check_ptrace : munmap failed, errno = %d", errno);
 	return ret;
 }
 
@@ -242,11 +249,12 @@
 
 static void __init check_sysemu(void)
 {
+	void *stack;
 	int pid, syscall, n, status, count=0;
 
 	printk("Checking syscall emulation patch for ptrace...");
 	sysemu_supported = 0;
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
 		goto fail;
@@ -264,7 +272,7 @@
 		panic("check_sysemu : failed to modify system "
 		      "call return, errno = %d", errno);
 
-	if (stop_ptraced_child(pid, 0, 0) < 0)
+	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 1;
@@ -272,7 +280,7 @@
 	set_using_sysemu(!force_sysemu_disabled);
 
 	printk("Checking advanced syscall emulation patch for ptrace...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 	while(1){
 		count++;
 		if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
@@ -297,7 +305,7 @@
 			break;
 		}
 	}
-	if (stop_ptraced_child(pid, 0, 0) < 0)
+	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 2;
@@ -308,17 +316,18 @@
 	return;
 
 fail:
-	stop_ptraced_child(pid, 1, 0);
+	stop_ptraced_child(pid, stack, 1, 0);
 fail_stopped:
 	printk("missing\n");
 }
 
 void __init check_ptrace(void)
 {
+	void *stack;
 	int pid, syscall, n, status;
 
 	printk("Checking that ptrace can change system call numbers...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
 		panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno);
@@ -345,7 +354,7 @@
 			break;
 		}
 	}
-	stop_ptraced_child(pid, 0, 1);
+	stop_ptraced_child(pid, stack, 0, 1);
 	printk("OK\n");
 	check_sysemu();
 }
@@ -380,10 +389,11 @@
 static inline void check_skas3_ptrace_support(void)
 {
 	struct ptrace_faultinfo fi;
+	void *stack;
 	int pid, n;
 
 	printf("Checking for the skas3 patch in the host...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
 	if (n < 0) {
@@ -402,7 +412,7 @@
 	}
 
 	init_registers(pid);
-	stop_ptraced_child(pid, 1, 1);
+	stop_ptraced_child(pid, stack, 1, 1);
 }
 
 int can_do_skas(void)
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index d4036ed..c23d8a0 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -412,7 +412,7 @@
 
 	if (ent == NULL)
 	{
-		printk("Failed to register /proc/sysemu\n");
+		printk(KERN_WARNING "Failed to register /proc/sysemu\n");
 		return(0);
 	}
 
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
index ba671da..6dd9e5b 100644
--- a/arch/um/kernel/skas/process.c
+++ b/arch/um/kernel/skas/process.c
@@ -64,7 +64,7 @@
                 (WSTOPSIG(status) == SIGVTALRM));
 
         if((n < 0) || !WIFSTOPPED(status) ||
-           (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status != SIGTRAP))){
+           (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
                 panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
                       "pid = %d, n = %d, errno = %d, status = 0x%x\n",
                       fname, pid, n, errno, status);
diff --git a/arch/um/kernel/skas/trap_user.c b/arch/um/kernel/skas/trap_user.c
index 0dee1d9..9950a67 100644
--- a/arch/um/kernel/skas/trap_user.c
+++ b/arch/um/kernel/skas/trap_user.c
@@ -58,7 +58,6 @@
         int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
                     (sig == SIGILL) || (sig == SIGTRAP));
 
-	regs->skas.is_user = 1;
 	if (segv)
 		get_skas_faultinfo(pid, &regs->skas.faultinfo);
 	info = &sig_info[sig];
diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c
index a8b4ef6..4e08f75 100644
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@@ -137,7 +137,10 @@
 void timer_handler(int sig, union uml_pt_regs *regs)
 {
 	local_irq_disable();
-	update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)), (regs)->skas.is_user));
+	irq_enter();
+	update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)),
+					 (regs)->skas.is_user));
+	irq_exit();
 	local_irq_enable();
 	if(current_thread->cpu == 0)
 		timer_irq(regs);
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index 5423b1c..9416e1c 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -9,9 +9,10 @@
  */
 #include <elf.h>
 #include <stddef.h>
+#include <asm/elf.h>
 #include "init.h"
 #include "elf_user.h"
-#include <asm/elf.h>
+#include "mem_user.h"
 
 #if ELF_CLASS == ELFCLASS32
 typedef Elf32_auxv_t elf_auxv_t;
@@ -41,6 +42,9 @@
 				break;
 			case AT_SYSINFO_EHDR:
 				vsyscall_ehdr = auxv->a_un.a_val;
+				/* See if the page is under TASK_SIZE */
+				if (vsyscall_ehdr < (unsigned long) envp)
+					vsyscall_ehdr = 0;
 				break;
 			case AT_HWCAP:
 				elf_aux_hwcap = auxv->a_un.a_val;
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 75d7af9..56d3f87 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -83,6 +83,9 @@
 
 EXPORT_SYMBOL_PROTO(getuid);
 
+EXPORT_SYMBOL_PROTO(fsync);
+EXPORT_SYMBOL_PROTO(fdatasync);
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically
diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c
index b251442..68aeabe 100644
--- a/arch/um/sys-i386/stub_segv.c
+++ b/arch/um/sys-i386/stub_segv.c
@@ -21,10 +21,10 @@
 	__asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid));
 	__asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;"
 		"int $0x80": : "g" (__NR_kill), "g" (SIGUSR1));
-	/* Pop the frame pointer and return address since we need to leave
+	/* Load pointer to sigcontext into esp, since we need to leave
 	 * the stack in its original form when we do the sigreturn here, by
 	 * hand.
 	 */
-	__asm__("popl %%eax ; popl %%eax ; popl %%eax ; movl %0, %%eax ; "
-		"int $0x80" : : "g" (__NR_sigreturn));
+	__asm__("mov %0,%%esp ; movl %1, %%eax ; "
+		"int $0x80" : : "a" (sc), "g" (__NR_sigreturn));
 }
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 4b83261..660a03a 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -329,12 +329,15 @@
 
 config GART_IOMMU
 	bool "IOMMU support"
+	default y
 	depends on PCI
 	help
-	  Support the K8 IOMMU. Needed to run systems with more than 4GB of memory
+	  Support the IOMMU. Needed to run systems with more than 3GB of memory
 	  properly with 32-bit PCI devices that do not support DAC (Double Address
 	  Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter.
 	  Normally the kernel will take the right choice by itself.
+	  This option includes a driver for the AMD Opteron/Athlon64 IOMMU
+	  and a software emulation used on some other systems.
 	  If unsure, say Y.
 
 # need this always enabled with GART_IOMMU for the VIA workaround
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 4289156..4c6ed96 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -21,18 +21,6 @@
 #
 # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
 
-#
-# early bootup linking needs 32bit. You can either use real 32bit tools
-# here or 64bit tools in 32bit mode.
-#
-IA32_CC := $(CC) $(CPPFLAGS) -m32 -O2 -fomit-frame-pointer
-IA32_LD := $(LD) -m elf_i386
-IA32_AS := $(CC) $(AFLAGS) -m32 -Wa,--32 -traditional -c
-IA32_OBJCOPY := $(CROSS_COMPILE)objcopy
-IA32_CPP := $(CROSS_COMPILE)gcc -m32 -E
-export IA32_CC IA32_LD IA32_AS IA32_OBJCOPY IA32_CPP
-
-
 LDFLAGS		:= -m elf_x86_64
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux :=
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 569595b..776f3c8 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Fri May 13 06:39:11 2005
+# Linux kernel version: 2.6.13-rc3
+# Fri Jul 22 16:47:31 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -84,14 +84,27 @@
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_MTRR=y
 CONFIG_SMP=y
-# CONFIG_PREEMPT is not set
 CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 CONFIG_K8_NUMA=y
 # CONFIG_NUMA_EMU is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_NUMA=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_DEC_LOCK=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=32
 CONFIG_HPET_TIMER=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -99,7 +112,13 @@
 CONFIG_SWIOTLB=y
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_INTEL=y
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ISA_DMA_API=y
@@ -118,12 +137,11 @@
 CONFIG_ACPI=y
 CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 # CONFIG_ACPI_VIDEO is not set
+CONFIG_ACPI_HOTKEY=m
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
@@ -154,6 +172,7 @@
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 
 #
 # CPUFreq processor drivers
@@ -204,6 +223,76 @@
 CONFIG_UID16=y
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -308,6 +397,7 @@
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
@@ -338,6 +428,7 @@
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -372,7 +463,6 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=y
 # CONFIG_SCSI_SATA_NV is not set
@@ -410,14 +500,21 @@
 #
 # Multi-device support (RAID and LVM)
 #
-# CONFIG_MD is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -430,75 +527,8 @@
 # CONFIG_I2O is not set
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -517,7 +547,9 @@
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
 
 #
 # Tulip family network device support
@@ -532,7 +564,7 @@
 CONFIG_FORCEDETH=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
+CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -553,14 +585,15 @@
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -647,7 +680,6 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -716,6 +748,7 @@
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -723,6 +756,12 @@
 # CONFIG_W1 is not set
 
 #
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
 # Misc devices
 #
 # CONFIG_IBM_ASM is not set
@@ -808,6 +847,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -846,12 +886,15 @@
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -902,10 +945,11 @@
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -924,6 +968,10 @@
 # CONFIG_INFINIBAND is not set
 
 #
+# SN Devices
+#
+
+#
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
@@ -935,6 +983,7 @@
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -957,6 +1006,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -986,7 +1036,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -1016,15 +1065,18 @@
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile
index a12b19d..f76217d 100644
--- a/arch/x86_64/ia32/Makefile
+++ b/arch/x86_64/ia32/Makefile
@@ -4,14 +4,14 @@
 
 obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
 	ia32_signal.o tls32.o \
-	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o
+	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
-$(obj)/syscall32.o: $(src)/syscall32.c \
+$(obj)/syscall32_syscall.o: \
 	$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
 
 # Teach kbuild about targets
diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c
index 816a3b8..adbc5f8 100644
--- a/arch/x86_64/ia32/syscall32.c
+++ b/arch/x86_64/ia32/syscall32.c
@@ -14,16 +14,6 @@
 #include <asm/tlbflush.h>
 #include <asm/ia32_unistd.h>
 
-/* 32bit VDSOs mapped into user space. */ 
-asm(".section \".init.data\",\"aw\"\n"
-    "syscall32_syscall:\n"
-    ".incbin \"arch/x86_64/ia32/vsyscall-syscall.so\"\n"
-    "syscall32_syscall_end:\n"
-    "syscall32_sysenter:\n"
-    ".incbin \"arch/x86_64/ia32/vsyscall-sysenter.so\"\n"
-    "syscall32_sysenter_end:\n"
-    ".previous");
-
 extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
 extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
 extern int sysctl_vsyscall32;
diff --git a/arch/x86_64/ia32/syscall32_syscall.S b/arch/x86_64/ia32/syscall32_syscall.S
new file mode 100644
index 0000000..8f8271b
--- /dev/null
+++ b/arch/x86_64/ia32/syscall32_syscall.S
@@ -0,0 +1,17 @@
+/* 32bit VDSOs mapped into user space. */
+
+	.section ".init.data","aw"
+
+	.globl syscall32_syscall
+	.globl syscall32_syscall_end
+
+syscall32_syscall:
+	.incbin "arch/x86_64/ia32/vsyscall-syscall.so"
+syscall32_syscall_end:
+
+	.globl syscall32_sysenter
+	.globl syscall32_sysenter_end
+
+syscall32_sysenter:
+	.incbin "arch/x86_64/ia32/vsyscall-sysenter.so"
+syscall32_sysenter_end:
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 2881749..096d470 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -76,7 +76,7 @@
 
 	.macro FAKE_STACK_FRAME child_rip
 	/* push in order ss, rsp, eflags, cs, rip */
-	xorq %rax, %rax
+	xorl %eax, %eax
 	pushq %rax /* ss */
 	CFI_ADJUST_CFA_OFFSET	8
 	pushq %rax /* rsp */
@@ -423,7 +423,7 @@
 	testl $3,CS(%rdi)
 	je 1f
 	swapgs	
-1:	addl $1,%gs:pda_irqcount	# RED-PEN should check preempt count
+1:	incl	%gs:pda_irqcount	# RED-PEN should check preempt count
 	movq %gs:pda_irqstackptr,%rax
 	cmoveq %rax,%rsp							
 	pushq %rdi			# save old stack	
@@ -436,7 +436,7 @@
 ret_from_intr:		
 	popq  %rdi
 	cli	
-	subl $1,%gs:pda_irqcount
+	decl %gs:pda_irqcount
 #ifdef CONFIG_DEBUG_INFO
 	movq RBP(%rdi),%rbp
 #endif
@@ -494,7 +494,7 @@
 	sti
 	SAVE_REST
 	movq $-1,ORIG_RAX(%rsp) 			
-	xorq %rsi,%rsi		# oldset
+	xorl %esi,%esi		# oldset
 	movq %rsp,%rdi		# &pt_regs
 	call do_notify_resume
 	RESTORE_REST
@@ -752,7 +752,7 @@
 	movq %rsi, %rdi
 	call *%rax
 	# exit
-	xorq %rdi, %rdi
+	xorl %edi, %edi
 	call do_exit
 
 /*
@@ -918,3 +918,15 @@
 ENTRY(call_debug)
        zeroentry do_call_debug
 
+ENTRY(call_softirq)
+	movq %gs:pda_irqstackptr,%rax
+	pushq %r15
+	movq %rsp,%r15
+	incl %gs:pda_irqcount
+	cmove %rax,%rsp
+	call __do_softirq
+	movq %r15,%rsp
+	decl %gs:pda_irqcount
+	popq %r15
+	ret
+
diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c
index 69b9c25..30c843a 100644
--- a/arch/x86_64/kernel/genapic.c
+++ b/arch/x86_64/kernel/genapic.c
@@ -31,6 +31,7 @@
 
 extern struct genapic apic_cluster;
 extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
 
 struct genapic *genapic = &apic_flat;
 
@@ -44,12 +45,7 @@
 	u8 clusters, max_cluster;
 	u8 id;
 	u8 cluster_cnt[NUM_APIC_CLUSTERS];
-
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
-		/* AMD always uses flat mode right now */
-		genapic = &apic_flat;
-		goto print;
-	}
+	int num_cpus = 0;
 
 #if defined(CONFIG_ACPI_BUS)
 	/*
@@ -64,15 +60,34 @@
 #endif
 
 	memset(cluster_cnt, 0, sizeof(cluster_cnt));
-
 	for (i = 0; i < NR_CPUS; i++) {
 		id = bios_cpu_apicid[i];
-		if (id != BAD_APICID)
-			cluster_cnt[APIC_CLUSTERID(id)]++;
+		if (id == BAD_APICID)
+			continue;
+		num_cpus++;
+		cluster_cnt[APIC_CLUSTERID(id)]++;
 	}
 
+	/* Don't use clustered mode on AMD platforms. */
+ 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+		genapic = &apic_physflat;
+#ifndef CONFIG_CPU_HOTPLUG
+		/* In the CPU hotplug case we cannot use broadcast mode
+		   because that opens a race when a CPU is removed.
+		   Stay at physflat mode in this case.
+		   It is bad to do this unconditionally though. Once
+		   we have ACPI platform support for CPU hotplug
+		   we should detect hotplug capablity from ACPI tables and
+		   only do this when really needed. -AK */
+		if (num_cpus <= 8)
+			genapic = &apic_flat;
+#endif
+ 		goto print;
+ 	}
+
 	clusters = 0;
 	max_cluster = 0;
+
 	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
 		if (cluster_cnt[i] > 0) {
 			++clusters;
diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c
index 2828469..adc9628 100644
--- a/arch/x86_64/kernel/genapic_flat.c
+++ b/arch/x86_64/kernel/genapic_flat.c
@@ -2,13 +2,11 @@
  * Copyright 2004 James Cleverdon, IBM.
  * Subject to the GNU Public License, v.2
  *
- * Flat APIC subarch code.  Maximum 8 CPUs, logical delivery.
+ * Flat APIC subarch code.
  *
  * Hacked for x86-64 by James Cleverdon from i386 architecture code by
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
- * Ashok Raj <ashok.raj@intel.com>
- * 	Removed IPI broadcast shortcut to support CPU hotplug
  */
 #include <linux/config.h>
 #include <linux/threads.h>
@@ -20,47 +18,6 @@
 #include <asm/smp.h>
 #include <asm/ipi.h>
 
-/*
- * The following permit choosing broadcast IPI shortcut v.s sending IPI only
- * to online cpus via the send_IPI_mask varient.
- * The mask version is my preferred option, since it eliminates a lot of
- * other extra code that would need to be written to cleanup intrs sent
- * to a CPU while offline.
- *
- * Sending broadcast introduces lots of trouble in CPU hotplug situations.
- * These IPI's are delivered to cpu's irrespective of their offline status
- * and could pickup stale intr data when these CPUS are turned online.
- *
- * Not using broadcast is a cleaner approach IMO, but Andi Kleen disagrees with
- * the idea of not using broadcast IPI's anymore. Hence the run time check
- * is introduced, on his request so we can choose an alternate mechanism.
- *
- * Initial wacky performance tests that collect cycle counts show
- * no increase in using mask v.s broadcast version. In fact they seem
- * identical in terms of cycle counts.
- *
- * if we need to use broadcast, we need to do the following.
- *
- * cli;
- * hold call_lock;
- * clear any pending IPI, just ack and clear all pending intr
- * set cpu_online_map;
- * release call_lock;
- * sti;
- *
- * The complicated dummy irq processing shown above is not required if
- * we didnt sent IPI's to wrong CPU's in the first place.
- *
- * - Ashok Raj <ashok.raj@intel.com>
- */
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-static int no_broadcast=DEFAULT_SEND_IPI;
-
 static cpumask_t flat_target_cpus(void)
 {
 	return cpu_online_map;
@@ -119,37 +76,15 @@
 	local_irq_restore(flags);
 }
 
-static inline void __local_flat_send_IPI_allbutself(int vector)
-{
-	if (no_broadcast) {
-		cpumask_t mask = cpu_online_map;
-		int this_cpu = get_cpu();
-
-		cpu_clear(this_cpu, mask);
-		flat_send_IPI_mask(mask, vector);
-		put_cpu();
-	}
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, APIC_DEST_LOGICAL);
-}
-
-static inline void __local_flat_send_IPI_all(int vector)
-{
-	if (no_broadcast)
-		flat_send_IPI_mask(cpu_online_map, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
-}
-
 static void flat_send_IPI_allbutself(int vector)
 {
 	if (((num_online_cpus()) - 1) >= 1)
-		__local_flat_send_IPI_allbutself(vector);
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
 }
 
 static void flat_send_IPI_all(int vector)
 {
-	__local_flat_send_IPI_all(vector);
+	__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
 }
 
 static int flat_apic_id_registered(void)
@@ -170,16 +105,6 @@
 	return ((ebx >> 24) & 0xFF) >> index_msb;
 }
 
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
-											"IPI Broadcast");
-	return 1;
-}
-
-__setup("no_ipi_broadcast", no_ipi_broadcast);
-
 struct genapic apic_flat =  {
 	.name = "flat",
 	.int_delivery_mode = dest_LowestPrio,
@@ -195,11 +120,62 @@
 	.phys_pkg_id = phys_pkg_id,
 };
 
-static int __init print_ipi_mode(void)
+/*
+ * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * We cannot use logical delivery in this case because the mask
+ * overflows, so use physical mode.
+ */
+
+static cpumask_t physflat_target_cpus(void)
 {
-	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
-											"Shortcut");
-	return 0;
+	return cpumask_of_cpu(0);
 }
 
-late_initcall(print_ipi_mode);
+static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
+{
+	send_IPI_mask_sequence(cpumask, vector);
+}
+
+static void physflat_send_IPI_allbutself(int vector)
+{
+	cpumask_t allbutme = cpu_online_map;
+	int me = get_cpu();
+	cpu_clear(me, allbutme);
+	physflat_send_IPI_mask(allbutme, vector);
+	put_cpu();
+}
+
+static void physflat_send_IPI_all(int vector)
+{
+	physflat_send_IPI_mask(cpu_online_map, vector);
+}
+
+static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return x86_cpu_to_apicid[cpu];
+	else
+		return BAD_APICID;
+}
+
+struct genapic apic_physflat =  {
+	.name = "physical flat",
+	.int_delivery_mode = dest_LowestPrio,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_LOWEST,
+	.target_cpus = physflat_target_cpus,
+	.apic_id_registered = flat_apic_id_registered,
+	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
+	.send_IPI_all = physflat_send_IPI_all,
+	.send_IPI_allbutself = physflat_send_IPI_allbutself,
+	.send_IPI_mask = physflat_send_IPI_mask,
+	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+};
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 8d765aa..98ff5eb 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -137,14 +137,14 @@
 	wrmsr
 
 	/* Setup cr0 */
-	xorq	%rax, %rax
-	btsq	$31, %rax			/* Enable paging */
-	btsq	$0, %rax			/* Enable protected mode */
-	btsq	$1, %rax			/* Enable MP */
-	btsq	$4, %rax			/* Enable ET */
-	btsq	$5, %rax			/* Enable NE */
-	btsq	$16, %rax			/* Enable WP */
-	btsq	$18, %rax			/* Enable AM */
+#define CR0_PM				1		/* protected mode */
+#define CR0_MP				(1<<1)
+#define CR0_ET				(1<<4)
+#define CR0_NE				(1<<5)
+#define CR0_WP				(1<<16)
+#define CR0_AM				(1<<18)
+#define CR0_PAGING 			(1<<31)
+	movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
 	/* Make changes effective */
 	movq	%rax, %cr0
 
diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c
index cc3fb85..849a20a 100644
--- a/arch/x86_64/kernel/irq.c
+++ b/arch/x86_64/kernel/irq.c
@@ -135,3 +135,22 @@
 	local_irq_disable();
 }
 #endif
+
+extern void call_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ 	__u32 pending;
+ 	unsigned long flags;
+
+ 	if (in_interrupt())
+ 		return;
+
+ 	local_irq_save(flags);
+ 	pending = local_softirq_pending();
+ 	/* Switch to interrupt stack */
+ 	if (pending)
+		call_softirq();
+ 	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c
index 60d1eff..89fab51 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86_64/kernel/machine_kexec.c
@@ -8,43 +8,26 @@
 
 #include <linux/mm.h>
 #include <linux/kexec.h>
-#include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/reboot.h>
-#include <asm/pda.h>
 #include <asm/pgtable.h>
-#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/cpufeature.h>
-#include <asm/hw_irq.h>
 
-#define LEVEL0_SIZE (1UL << 12UL)
-#define LEVEL1_SIZE (1UL << 21UL)
-#define LEVEL2_SIZE (1UL << 30UL)
-#define LEVEL3_SIZE (1UL << 39UL)
-#define LEVEL4_SIZE (1UL << 48UL)
-
-#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE)
-#define L2_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L3_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-static void init_level2_page(u64 *level2p, unsigned long addr)
+static void init_level2_page(pmd_t *level2p, unsigned long addr)
 {
 	unsigned long end_addr;
 
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL2_SIZE;
+	end_addr = addr + PUD_SIZE;
 	while (addr < end_addr) {
-		*(level2p++) = addr | L1_ATTR;
-		addr += LEVEL1_SIZE;
+		set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
+		addr += PMD_SIZE;
 	}
 }
 
-static int init_level3_page(struct kimage *image, u64 *level3p,
+static int init_level3_page(struct kimage *image, pud_t *level3p,
 				unsigned long addr, unsigned long last_addr)
 {
 	unsigned long end_addr;
@@ -52,32 +35,32 @@
 
 	result = 0;
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL3_SIZE;
+	end_addr = addr + PGDIR_SIZE;
 	while ((addr < last_addr) && (addr < end_addr)) {
 		struct page *page;
-		u64 *level2p;
+		pmd_t *level2p;
 
 		page = kimage_alloc_control_pages(image, 0);
 		if (!page) {
 			result = -ENOMEM;
 			goto out;
 		}
-		level2p = (u64 *)page_address(page);
+		level2p = (pmd_t *)page_address(page);
 		init_level2_page(level2p, addr);
-		*(level3p++) = __pa(level2p) | L2_ATTR;
-		addr += LEVEL2_SIZE;
+		set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE));
+		addr += PUD_SIZE;
 	}
 	/* clear the unused entries */
 	while (addr < end_addr) {
-		*(level3p++) = 0;
-		addr += LEVEL2_SIZE;
+		pud_clear(level3p++);
+		addr += PUD_SIZE;
 	}
 out:
 	return result;
 }
 
 
-static int init_level4_page(struct kimage *image, u64 *level4p,
+static int init_level4_page(struct kimage *image, pgd_t *level4p,
 				unsigned long addr, unsigned long last_addr)
 {
 	unsigned long end_addr;
@@ -85,28 +68,28 @@
 
 	result = 0;
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL4_SIZE;
+	end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE);
 	while ((addr < last_addr) && (addr < end_addr)) {
 		struct page *page;
-		u64 *level3p;
+		pud_t *level3p;
 
 		page = kimage_alloc_control_pages(image, 0);
 		if (!page) {
 			result = -ENOMEM;
 			goto out;
 		}
-		level3p = (u64 *)page_address(page);
+		level3p = (pud_t *)page_address(page);
 		result = init_level3_page(image, level3p, addr, last_addr);
 		if (result) {
 			goto out;
 		}
-		*(level4p++) = __pa(level3p) | L3_ATTR;
-		addr += LEVEL3_SIZE;
+		set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
+		addr += PGDIR_SIZE;
 	}
 	/* clear the unused entries */
 	while (addr < end_addr) {
-		*(level4p++) = 0;
-		addr += LEVEL3_SIZE;
+		pgd_clear(level4p++);
+		addr += PGDIR_SIZE;
 	}
 out:
 	return result;
@@ -115,52 +98,50 @@
 
 static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 {
-	u64 *level4p;
-	level4p = (u64 *)__va(start_pgtable);
+	pgd_t *level4p;
+	level4p = (pgd_t *)__va(start_pgtable);
  	return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
 }
 
 static void set_idt(void *newidt, u16 limit)
 {
-	unsigned char curidt[10];
+	struct desc_ptr curidt;
 
 	/* x86-64 supports unaliged loads & stores */
-	(*(u16 *)(curidt)) = limit;
-	(*(u64 *)(curidt +2)) = (unsigned long)(newidt);
+	curidt.size    = limit;
+	curidt.address = (unsigned long)newidt;
 
 	__asm__ __volatile__ (
-		"lidt %0\n"
-		: "=m" (curidt)
+		"lidtq %0\n"
+		: : "m" (curidt)
 		);
 };
 
 
 static void set_gdt(void *newgdt, u16 limit)
 {
-	unsigned char curgdt[10];
+	struct desc_ptr curgdt;
 
 	/* x86-64 supports unaligned loads & stores */
-	(*(u16 *)(curgdt)) = limit;
-	(*(u64 *)(curgdt +2)) = (unsigned long)(newgdt);
+	curgdt.size    = limit;
+	curgdt.address = (unsigned long)newgdt;
 
 	__asm__ __volatile__ (
-		"lgdt %0\n"
-		: "=m" (curgdt)
+		"lgdtq %0\n"
+		: : "m" (curgdt)
 		);
 };
 
 static void load_segments(void)
 {
 	__asm__ __volatile__ (
-		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
-		"\tmovl %eax,%ds\n"
-		"\tmovl %eax,%es\n"
-		"\tmovl %eax,%ss\n"
-		"\tmovl %eax,%fs\n"
-		"\tmovl %eax,%gs\n"
+		"\tmovl %0,%%ds\n"
+		"\tmovl %0,%%es\n"
+		"\tmovl %0,%%ss\n"
+		"\tmovl %0,%%fs\n"
+		"\tmovl %0,%%gs\n"
+		: : "a" (__KERNEL_DS)
 		);
-#undef STR
-#undef __STR
 }
 
 typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page,
@@ -178,7 +159,7 @@
 
 	/* Calculate the offsets */
 	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	control_code_buffer = start_pgtable + 4096UL;
+	control_code_buffer = start_pgtable + PAGE_SIZE;
 
 	/* Setup the identity mapped 64bit page table */
 	result = init_pgtable(image, start_pgtable);
@@ -214,7 +195,7 @@
 	/* Calculate the offsets */
 	page_list = image->head;
 	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	control_code_buffer = start_pgtable + 4096UL;
+	control_code_buffer = start_pgtable + PAGE_SIZE;
 
 	/* Set the low half of the page table to my identity mapped
 	 * page table for kexec.  Leave the high half pointing at the
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 21e7062..3b267c9 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -15,6 +15,8 @@
 #include <linux/sysdev.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
 #include <asm/processor.h> 
 #include <asm/msr.h>
 #include <asm/mce.h>
@@ -514,10 +516,7 @@
 	set_kset_name("machinecheck"),
 };
 
-static struct sys_device device_mce = {
-	.id	= 0,
-	.cls	= &mce_sysclass,
-};
+static DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
@@ -542,27 +541,83 @@
 ACCESSOR(tolerant,tolerant,)
 ACCESSOR(check_interval,check_interval,mce_restart())
 
-static __cpuinit int mce_init_device(void)
+/* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
+static __cpuinit int mce_create_device(unsigned int cpu)
 {
 	int err;
+	if (!mce_available(&cpu_data[cpu]))
+		return -EIO;
+
+	per_cpu(device_mce,cpu).id = cpu;
+	per_cpu(device_mce,cpu).cls = &mce_sysclass;
+
+	err = sysdev_register(&per_cpu(device_mce,cpu));
+
+	if (!err) {
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank0ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank1ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank2ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank3ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank4ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval);
+	}
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static __cpuinit void mce_remove_device(unsigned int cpu)
+{
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank0ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank1ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank2ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank3ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank4ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval);
+	sysdev_unregister(&per_cpu(device_mce,cpu));
+}
+#endif
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static __cpuinit int
+mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		mce_create_device(cpu);
+		break;
+#ifdef CONFIG_HOTPLUG_CPU
+	case CPU_DEAD:
+		mce_remove_device(cpu);
+		break;
+#endif
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mce_cpu_notifier = {
+	.notifier_call = mce_cpu_callback,
+};
+
+static __init int mce_init_device(void)
+{
+	int err;
+	int i = 0;
+
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 	err = sysdev_class_register(&mce_sysclass);
-	if (!err)
-		err = sysdev_register(&device_mce);
-	if (!err) { 
-		/* could create per CPU objects, but it is not worth it. */
-		sysdev_create_file(&device_mce, &attr_bank0ctl); 
-		sysdev_create_file(&device_mce, &attr_bank1ctl); 
-		sysdev_create_file(&device_mce, &attr_bank2ctl); 
-		sysdev_create_file(&device_mce, &attr_bank3ctl); 
-		sysdev_create_file(&device_mce, &attr_bank4ctl); 
-		sysdev_create_file(&device_mce, &attr_tolerant); 
-		sysdev_create_file(&device_mce, &attr_check_interval);
-	} 
-	
+
+	for_each_online_cpu(i) {
+		mce_create_device(i);
+	}
+
+	register_cpu_notifier(&mce_cpu_notifier);
 	misc_register(&mce_log_device);
 	return err;
-
 }
+
 device_initcall(mce_init_device);
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 9c5aa2a..79c362d 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -109,7 +109,7 @@
 
 static void __init MP_processor_info (struct mpc_config_processor *m)
 {
-	int ver;
+	int ver, cpu;
 	static int found_bsp=0;
 
 	if (!(m->mpc_cpuflag & CPU_ENABLED))
@@ -131,7 +131,7 @@
 		return;
 	}
 
-	num_processors++;
+	cpu = num_processors++;
 
 	if (m->mpc_apicid > MAX_APICS) {
 		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
@@ -155,13 +155,18 @@
  		 * in same order as logical cpu numbers. Hence the first
  		 * entry is BSP, and so on.
  		 */
+		cpu = 0;
+
  		bios_cpu_apicid[0] = m->mpc_apicid;
  		x86_cpu_to_apicid[0] = m->mpc_apicid;
  		found_bsp = 1;
- 	} else {
- 		bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid;
- 		x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid;
- 	}
+ 	} else
+		cpu = num_processors - found_bsp;
+	bios_cpu_apicid[cpu] = m->mpc_apicid;
+	x86_cpu_to_apicid[cpu] = m->mpc_apicid;
+
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)
@@ -965,8 +970,21 @@
 		 * due to unused I/O APIC pins.
 		 */
 		int irq = gsi;
-		gsi = pci_irq++;
-		gsi_to_irq[irq] = gsi;
+		if (gsi < MAX_GSI_NUM) {
+			if (gsi > 15)
+				gsi = pci_irq++;
+#ifdef CONFIG_ACPI_BUS
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_fadt.sci_int)
+				gsi = pci_irq++;
+#endif
+			gsi_to_irq[irq] = gsi;
+		} else {
+			printk(KERN_ERR "GSI %u is too high\n", gsi);
+			return gsi;
+		}
 	}
 
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 5fd0322..0aa5262 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -765,8 +765,6 @@
 	int cpu = smp_processor_id();
 	int node = 0;
 	unsigned bits;
-	if (c->x86_num_cores == 1)
-		return;
 
 	bits = 0;
 	while ((1 << bits) < c->x86_num_cores)
@@ -1081,8 +1079,7 @@
 	else
 		mtrr_ap_init();
 #ifdef CONFIG_NUMA
-	if (c != &boot_cpu_data)
-		numa_add_cpu(c - cpu_data);
+	numa_add_cpu(smp_processor_id());
 #endif
 }
  
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index f2b9c6b..34082c1 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/bootmem.h>
 #include <linux/bitops.h>
+#include <linux/module.h>
 #include <asm/bootsetup.h>
 #include <asm/pda.h>
 #include <asm/pgtable.h>
@@ -22,10 +23,8 @@
 #include <asm/smp.h>
 #include <asm/i387.h>
 #include <asm/percpu.h>
-#include <asm/mtrr.h>
 #include <asm/proto.h>
-#include <asm/mman.h>
-#include <asm/numa.h>
+#include <asm/sections.h>
 
 char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,};
 
@@ -33,11 +32,6 @@
 
 struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; 
 
-extern struct task_struct init_task;
-
-extern unsigned char __per_cpu_start[], __per_cpu_end[]; 
-
-extern struct desc_ptr cpu_gdt_descr[];
 struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; 
 
 char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
@@ -101,7 +95,7 @@
 #endif
 
 	for (i = 0; i < NR_CPUS; i++) { 
-		unsigned char *ptr;
+		char *ptr;
 
 		if (!NODE_DATA(cpu_to_node(i))) {
 			printk("cpu with no node %d, num_online_nodes %d\n",
@@ -190,11 +184,7 @@
  */
 void __cpuinit cpu_init (void)
 {
-#ifdef CONFIG_SMP
 	int cpu = stack_smp_processor_id();
-#else
-	int cpu = smp_processor_id();
-#endif
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	unsigned long v; 
 	char *estacks = NULL; 
@@ -214,7 +204,7 @@
 
 	printk("Initializing CPU#%d\n", cpu);
 
-		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index ccae392..e595822 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -129,10 +129,9 @@
 		} else
 			leave_mm(cpu);
 	}
+out:
 	ack_APIC_irq();
 	cpu_clear(cpu, flush_cpumask);
-
-out:
 	put_cpu_no_resched();
 }
 
@@ -294,6 +293,69 @@
 }
 
 /*
+ * this function sends a 'generic call function' IPI to one other CPU
+ * in the system.
+ */
+static void __smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+				int nonatomic, int wait)
+{
+	struct call_data_struct data;
+	int cpus = 1;
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	wmb();
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (!wait)
+		return;
+
+	while (atomic_read(&data.finished) != cpus)
+		cpu_relax();
+}
+
+/*
+ * smp_call_function_single - Run a function on another CPU
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Currently unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Retrurns 0 on success, else a negative status code.
+ *
+ * Does not return until the remote CPU is nearly ready to execute <func>
+ * or is or has executed.
+ */
+
+int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+	int nonatomic, int wait)
+{
+	/* prevent preemption and reschedule on another processor */
+	int me = get_cpu();
+	if (cpu == me) {
+		WARN_ON(1);
+		put_cpu();
+		return -EBUSY;
+	}
+	spin_lock_bh(&call_lock);
+	__smp_call_function_single(cpu, func, info, nonatomic, wait);
+	spin_unlock_bh(&call_lock);
+	put_cpu();
+	return 0;
+}
+
+/*
  * this function sends a 'generic call function' IPI to all other CPUs
  * in the system.
  */
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index e773a79..6e4807d 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -113,24 +113,6 @@
 #define set_idle_for_cpu(x,p)   (idle_thread_array[(x)] = (p))
 
 /*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * If cpu-hotplug is supported, then we need to preallocate for all
- * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
- * - Ashok Raj
- */
-#ifdef CONFIG_HOTPLUG_CPU
-#define fixup_cpu_possible_map(x)	cpu_set((x), cpu_possible_map)
-#else
-#define fixup_cpu_possible_map(x)
-#endif
-
-/*
  * Currently trivial. Write the real->protected mode
  * bootstrap into the page concerned. The caller
  * has made sure it's suitably aligned.
@@ -229,9 +211,6 @@
 {
 	unsigned long flags, i;
 
-	if (smp_processor_id() != 0)
-		return;
-
 	go[MASTER] = 0;
 
 	local_irq_save(flags);
@@ -280,7 +259,7 @@
 	return tcenter - best_tm;
 }
 
-static __cpuinit void sync_tsc(void)
+static __cpuinit void sync_tsc(unsigned int master)
 {
 	int i, done = 0;
 	long delta, adj, adjust_latency = 0;
@@ -294,9 +273,17 @@
 	} t[NUM_ROUNDS] __cpuinitdata;
 #endif
 
+	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n",
+		smp_processor_id(), master);
+
 	go[MASTER] = 1;
 
-	smp_call_function(sync_master, NULL, 1, 0);
+	/* It is dangerous to broadcast IPI as cpus are coming up,
+	 * as they may not be ready to accept them.  So since
+	 * we only need to send the ipi to the boot cpu direct
+	 * the message, and avoid the race.
+	 */
+	smp_call_function_single(master, sync_master, NULL, 1, 0);
 
 	while (go[MASTER])	/* wait for master to be ready */
 		no_cpu_relax();
@@ -340,16 +327,14 @@
 	printk(KERN_INFO
 	       "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, "
 	       "maxerr %lu cycles)\n",
-	       smp_processor_id(), boot_cpu_id, delta, rt);
+	       smp_processor_id(), master, delta, rt);
 }
 
 static void __cpuinit tsc_sync_wait(void)
 {
 	if (notscsync || !cpu_has_tsc)
 		return;
-	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(),
-			boot_cpu_id);
-	sync_tsc();
+	sync_tsc(boot_cpu_id);
 }
 
 static __init int notscsync_setup(char *s)
@@ -773,8 +758,9 @@
 	initial_code = start_secondary;
 	clear_ti_thread_flag(c_idle.idle->thread_info, TIF_FORK);
 
-	printk(KERN_INFO "Booting processor %d/%d rip %lx rsp %lx\n", cpu, apicid,
-	       start_rip, init_rsp);
+	printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
+		cpus_weight(cpu_present_map),
+		apicid);
 
 	/*
 	 * This grunge runs the startup process for
@@ -924,6 +910,27 @@
 	}
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * If cpu-hotplug is supported, then we need to preallocate for all
+ * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
+ * - Ashok Raj
+ */
+static void prefill_possible_map(void)
+{
+	int i;
+	for (i = 0; i < NR_CPUS; i++)
+		cpu_set(i, cpu_possible_map);
+}
+#endif
+
 /*
  * Various sanity checks.
  */
@@ -987,25 +994,15 @@
  */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	nmi_watchdog_default();
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
 
 	enforce_max_cpus(max_cpus);
 
-	/*
-	 * Fill in cpu_present_mask
-	 */
-	for (i = 0; i < NR_CPUS; i++) {
-		int apicid = cpu_present_to_apicid(i);
-		if (physid_isset(apicid, phys_cpu_present_map)) {
-			cpu_set(i, cpu_present_map);
-			cpu_set(i, cpu_possible_map);
-		}
-		fixup_cpu_possible_map(i);
-	}
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
@@ -1189,8 +1186,7 @@
 			printk ("CPU %d is now offline\n", cpu);
 			return;
 		}
-		current->state = TASK_UNINTERRUPTIBLE;
-		schedule_timeout(HZ/10);
+		msleep(100);
 	}
  	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 1027366..6ead433 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -594,9 +594,6 @@
 	if (!cpu)
 		reason = get_nmi_reason();
 
-	if (!cpu_online(cpu))
-		return;
-
 	if (!(reason & 0xc0)) {
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT)
 								== NOTIFY_STOP)
diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86_64/lib/csum-copy.S
index 01808ec..72fd55e 100644
--- a/arch/x86_64/lib/csum-copy.S
+++ b/arch/x86_64/lib/csum-copy.S
@@ -188,8 +188,8 @@
 	source
 	movw (%rdi),%bx
 	adcl %ebx,%eax
-	dest
 	decl %ecx
+	dest
 	movw %bx,(%rsi)
 	leaq 2(%rdi),%rdi
 	leaq 2(%rsi),%rsi
diff --git a/arch/x86_64/lib/delay.c b/arch/x86_64/lib/delay.c
index 33a873a..841bd73 100644
--- a/arch/x86_64/lib/delay.c
+++ b/arch/x86_64/lib/delay.c
@@ -18,8 +18,6 @@
 #include <asm/smp.h>
 #endif
 
-int x86_udelay_tsc = 0;		/* Delay via TSC */
-
 int read_current_timer(unsigned long *timer_value)
 {
 	rdtscll(*timer_value);
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 2f18798..493819e 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -23,7 +23,6 @@
 #include <linux/vt_kern.h>		/* For unblank_screen() */
 #include <linux/compiler.h>
 #include <linux/module.h>
-#include <linux/kprobes.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -440,13 +439,13 @@
 	 * the fault.
 	 */
 	switch (handle_mm_fault(mm, vma, address, write)) {
-	case 1:
+	case VM_FAULT_MINOR:
 		tsk->min_flt++;
 		break;
-	case 2:
+	case VM_FAULT_MAJOR:
 		tsk->maj_flt++;
 		break;
-	case 0:
+	case VM_FAULT_SIGBUS:
 		goto do_sigbus;
 	default:
 		goto out_of_memory;
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index ac61c18..70cb290 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -36,34 +36,36 @@
 int __init compute_hash_shift(struct node *nodes, int numnodes)
 {
 	int i; 
-	int shift = 24;
-	u64 addr;
+	int shift = 20;
+	unsigned long addr,maxend=0;
 	
-	/* When in doubt use brute force. */
-	while (shift < 48) { 
-		memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); 
-		for (i = 0; i < numnodes; i++) {
-			if (nodes[i].start == nodes[i].end) 
-				continue;
-			for (addr = nodes[i].start; 
-			     addr < nodes[i].end; 
-			     addr += (1UL << shift)) {
-				if (memnodemap[addr >> shift] != 0xff && 
-				    memnodemap[addr >> shift] != i) { 
-					printk(KERN_INFO 
-					    "node %d shift %d addr %Lx conflict %d\n", 
-					       i, shift, addr, memnodemap[addr>>shift]);
-					goto next; 
-				} 
-				memnodemap[addr >> shift] = i; 
+	for (i = 0; i < numnodes; i++)
+		if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend))
+				maxend = nodes[i].end;
+
+	while ((1UL << shift) <  (maxend / NODEMAPSIZE))
+		shift++;
+
+	printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n",
+			shift,maxend);
+	memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE);
+	for (i = 0; i < numnodes; i++) {
+		if (nodes[i].start == nodes[i].end)
+			continue;
+		for (addr = nodes[i].start;
+		     addr < nodes[i].end;
+		     addr += (1UL << shift)) {
+			if (memnodemap[addr >> shift] != 0xff) {
+				printk(KERN_INFO
+	"Your memory is not aligned you need to rebuild your kernel "
+	"with a bigger NODEMAPSIZE shift=%d adder=%lu\n",
+					shift,addr);
+				return -1;
 			} 
+			memnodemap[addr >> shift] = i;
 		} 
-		return shift; 
-	next:
-		shift++; 
 	} 
-	memset(memnodemap,0,sizeof(*memnodemap) * NODEMAPSIZE); 
-	return -1; 
+	return shift;
 }
 
 #ifdef CONFIG_SPARSEMEM
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 5d01b31..8e3d097 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -20,6 +20,9 @@
 
 static struct acpi_table_slit *acpi_slit;
 
+/* Internal processor count */
+static unsigned int __initdata num_processors = 0;
+
 static nodemask_t nodes_parsed __initdata;
 static nodemask_t nodes_found __initdata;
 static struct node nodes[MAX_NUMNODES] __initdata;
@@ -101,16 +104,18 @@
 		bad_srat();
 		return;
 	}
-	if (pa->apic_id >= NR_CPUS) {
-		printk(KERN_ERR "SRAT: lapic %u too large.\n",
-		       pa->apic_id);
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_ERR "SRAT: Processor #%d (lapic %u) INVALID. (Max ID: %d).\n",
+			num_processors, pa->apic_id, NR_CPUS);
 		bad_srat();
 		return;
 	}
-	cpu_to_node[pa->apic_id] = node;
+	cpu_to_node[num_processors] = node;
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
-	       pxm, pa->apic_id, node);
+	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> CPU %u -> Node %u\n",
+	       pxm, pa->apic_id, num_processors, node);
+
+	num_processors++;
 }
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
@@ -124,7 +129,6 @@
 
 	if (srat_disabled() || ma->flags.enabled == 0)
 		return;
-	/* hotplug bit is ignored for now */
 	pxm = ma->proximity_domain;
 	node = setup_node(pxm);
 	if (node < 0) {
@@ -134,6 +138,10 @@
 	}
 	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
 	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+	/* It is fine to add this area to the nodes data it will be used later*/
+	if (ma->flags.hot_pluggable == 1)
+		printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
+				start, end);
 	i = conflicting_nodes(start, end);
 	if (i >= 0) {
 		printk(KERN_ERR
diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86_64/pci/k8-bus.c
index 7e7d0c2..c2c38b5 100644
--- a/arch/x86_64/pci/k8-bus.c
+++ b/arch/x86_64/pci/k8-bus.c
@@ -29,7 +29,7 @@
 fill_mp_bus_to_cpumask(void)
 {
 	struct pci_dev *nb_dev = NULL;
-	int i, j, printed;
+	int i, j;
 	u32 ldtbus, nid;
 	static int lbnr[3] = {
 		LDT_BUS_NUMBER_REGISTER_0,
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 986410e..ba13896 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -133,9 +133,10 @@
 	depends on ACPI_INTERPRETER
 	depends on EXPERIMENTAL
 	depends on !IA64_SGI_SN
-	default m
+	default n
 	help
-	ACPI generic hotkey
+	  Experimental consolidated hotkey driver.
+	  If you are unsure, say N.
 
 config ACPI_FAN
 	tristate "Fan"
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 0f45d45..8162fd0 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -26,6 +26,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -33,6 +36,9 @@
 #define ACPI_BUTTON_COMPONENT		0x00080000
 #define ACPI_BUTTON_DRIVER_NAME		"ACPI Button Driver"
 #define ACPI_BUTTON_CLASS		"button"
+#define ACPI_BUTTON_FILE_INFO		"info"
+#define ACPI_BUTTON_FILE_STATE		"state"
+#define ACPI_BUTTON_TYPE_UNKNOWN	0x00
 #define ACPI_BUTTON_NOTIFY_STATUS	0x80
 
 #define ACPI_BUTTON_SUBCLASS_POWER	"power"
@@ -64,6 +70,8 @@
 
 static int acpi_button_add (struct acpi_device *device);
 static int acpi_button_remove (struct acpi_device *device, int type);
+static int acpi_button_info_open_fs(struct inode *inode, struct file *file);
+static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
 
 static struct acpi_driver acpi_button_driver = {
 	.name =		ACPI_BUTTON_DRIVER_NAME,
@@ -82,6 +90,179 @@
 	unsigned long		pushed;
 };
 
+static struct file_operations acpi_button_info_fops = {
+	.open		= acpi_button_info_open_fs,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct file_operations acpi_button_state_fops = {
+	.open		= acpi_button_state_open_fs,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+/* --------------------------------------------------------------------------
+                              FS Interface (/proc)
+   -------------------------------------------------------------------------- */
+
+static struct proc_dir_entry	*acpi_button_dir;
+
+static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_button	*button = (struct acpi_button *) seq->private;
+
+	ACPI_FUNCTION_TRACE("acpi_button_info_seq_show");
+
+	if (!button || !button->device)
+		return_VALUE(0);
+
+	seq_printf(seq, "type:                    %s\n", 
+		acpi_device_name(button->device));
+
+	return_VALUE(0);
+}
+
+static int acpi_button_info_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_button_info_seq_show, PDE(inode)->data);
+}
+	
+static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_button	*button = (struct acpi_button *) seq->private;
+	acpi_status		status;
+	unsigned long		state;
+
+	ACPI_FUNCTION_TRACE("acpi_button_state_seq_show");
+
+	if (!button || !button->device)
+		return_VALUE(0);
+
+	status = acpi_evaluate_integer(button->handle,"_LID",NULL,&state);
+	if (ACPI_FAILURE(status)) {
+		seq_printf(seq, "state:      unsupported\n");
+	}
+	else{
+		seq_printf(seq, "state:      %s\n", (state ? "open" : "closed")); 
+	}
+
+	return_VALUE(0);
+}
+
+static int acpi_button_state_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, acpi_button_state_seq_show, PDE(inode)->data);
+}
+
+static struct proc_dir_entry *acpi_power_dir;
+static struct proc_dir_entry *acpi_sleep_dir;
+static struct proc_dir_entry *acpi_lid_dir;
+
+static int
+acpi_button_add_fs (
+	struct acpi_device	*device)
+{
+	struct proc_dir_entry	*entry = NULL;
+	struct acpi_button	*button = NULL;
+
+	ACPI_FUNCTION_TRACE("acpi_button_add_fs");
+
+	if (!device || !acpi_driver_data(device))
+		return_VALUE(-EINVAL);
+
+	button = acpi_driver_data(device);
+
+	switch (button->type) {
+	case ACPI_BUTTON_TYPE_POWER:
+	case ACPI_BUTTON_TYPE_POWERF:
+		if (!acpi_power_dir)
+			acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER, 
+				acpi_button_dir);
+		entry = acpi_power_dir;
+		break;
+	case ACPI_BUTTON_TYPE_SLEEP:
+	case ACPI_BUTTON_TYPE_SLEEPF:
+		if (!acpi_sleep_dir)
+			acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP, 
+				acpi_button_dir);
+		entry = acpi_sleep_dir;
+		break;
+	case ACPI_BUTTON_TYPE_LID:
+		if (!acpi_lid_dir)
+			acpi_lid_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_LID, 
+				acpi_button_dir);
+		entry = acpi_lid_dir;
+		break;
+	}
+
+	if (!entry)
+		return_VALUE(-ENODEV);
+	entry->owner = THIS_MODULE;
+
+	acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), entry);
+	if (!acpi_device_dir(device))
+		return_VALUE(-ENODEV);
+	acpi_device_dir(device)->owner = THIS_MODULE;
+
+	/* 'info' [R] */
+	entry = create_proc_entry(ACPI_BUTTON_FILE_INFO,
+		S_IRUGO, acpi_device_dir(device));
+	if (!entry)
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+			"Unable to create '%s' fs entry\n",
+			ACPI_BUTTON_FILE_INFO));
+	else {
+		entry->proc_fops = &acpi_button_info_fops;
+		entry->data = acpi_driver_data(device);
+		entry->owner = THIS_MODULE;
+	}
+
+	/* show lid state [R] */
+	if (button->type == ACPI_BUTTON_TYPE_LID) {
+		entry = create_proc_entry(ACPI_BUTTON_FILE_STATE,
+			S_IRUGO, acpi_device_dir(device));
+		if (!entry)
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				"Unable to create '%s' fs entry\n",
+				ACPI_BUTTON_FILE_INFO));
+		else {
+			entry->proc_fops = &acpi_button_state_fops;
+			entry->data = acpi_driver_data(device);
+			entry->owner = THIS_MODULE;
+		}
+	}
+
+	return_VALUE(0);
+}
+
+
+static int
+acpi_button_remove_fs (
+	struct acpi_device	*device)
+{
+	struct acpi_button	*button = NULL;
+
+	ACPI_FUNCTION_TRACE("acpi_button_remove_fs");
+
+	button = acpi_driver_data(device);
+	if (acpi_device_dir(device)) {
+		if (button->type == ACPI_BUTTON_TYPE_LID)
+			remove_proc_entry(ACPI_BUTTON_FILE_STATE,
+					     acpi_device_dir(device));
+		remove_proc_entry(ACPI_BUTTON_FILE_INFO,
+				     acpi_device_dir(device));
+
+		remove_proc_entry(acpi_device_bid(device),
+				     acpi_device_dir(device)->parent);
+		acpi_device_dir(device) = NULL;
+	}
+
+	return_VALUE(0);
+}
+
+
 /* --------------------------------------------------------------------------
                                 Driver Interface
    -------------------------------------------------------------------------- */
@@ -121,7 +302,8 @@
 	
 	ACPI_FUNCTION_TRACE("acpi_button_notify_fixed");
 
-	BUG_ON(!button);
+	if (!button)
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
 
 	acpi_button_notify(button->handle, ACPI_BUTTON_NOTIFY_STATUS, button);
 
@@ -197,6 +379,10 @@
 		goto end;
 	}
 
+	result = acpi_button_add_fs(device);
+	if (result)
+		goto end;
+
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWERF:
 		status = acpi_install_fixed_event_handler (
@@ -240,6 +426,7 @@
 
 end:
 	if (result) {
+		acpi_button_remove_fs(device);
 		kfree(button);
 	}
 
@@ -280,6 +467,8 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 			"Error removing notify handler\n"));
 
+	acpi_button_remove_fs(device);	
+
 	kfree(button);
 
 	return_VALUE(0);
@@ -293,14 +482,20 @@
 
 	ACPI_FUNCTION_TRACE("acpi_button_init");
 
+	acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
+	if (!acpi_button_dir)
+		return_VALUE(-ENODEV);
+	acpi_button_dir->owner = THIS_MODULE;
 	result = acpi_bus_register_driver(&acpi_button_driver);
 	if (result < 0) {
+		remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
 		return_VALUE(-ENODEV);
 	}
 
 	return_VALUE(0);
 }
 
+
 static void __exit
 acpi_button_exit (void)
 {
@@ -308,8 +503,17 @@
 
 	acpi_bus_unregister_driver(&acpi_button_driver);
 
+	if (acpi_power_dir) 
+		remove_proc_entry(ACPI_BUTTON_SUBCLASS_POWER, acpi_button_dir);
+	if (acpi_sleep_dir)
+		remove_proc_entry(ACPI_BUTTON_SUBCLASS_SLEEP, acpi_button_dir);
+	if (acpi_lid_dir)
+		remove_proc_entry(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
+	remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
+
 	return_VOID;
 }
 
+
 module_init(acpi_button_init);
 module_exit(acpi_button_exit);
diff --git a/drivers/acpi/dispatcher/dswload.c b/drivers/acpi/dispatcher/dswload.c
index 1ac197c..d116200 100644
--- a/drivers/acpi/dispatcher/dswload.c
+++ b/drivers/acpi/dispatcher/dswload.c
@@ -491,12 +491,6 @@
 		if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
 			  (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
 			(!(walk_state->op_info->flags & AML_NAMED))) {
-			if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
-				(walk_state->op_info->class == AML_CLASS_CONTROL)) {
-				ACPI_REPORT_WARNING ((
-					"Encountered executable code at module level, [%s]\n",
-					acpi_ps_get_opcode_name (walk_state->opcode)));
-			}
 			return_ACPI_STATUS (AE_OK);
 		}
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index fca4140..1ac5731 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -59,76 +59,186 @@
 #define ACPI_EC_DELAY		50	/* Wait 50ms max. during EC ops */
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 
+#define ACPI_EC_UDELAY         100     /* Poll @ 100us increments */
+#define ACPI_EC_UDELAY_COUNT   1000    /* Wait 10ms max. during EC ops */
+
 #define ACPI_EC_COMMAND_READ	0x80
 #define ACPI_EC_COMMAND_WRITE	0x81
 #define ACPI_EC_BURST_ENABLE	0x82
 #define ACPI_EC_BURST_DISABLE	0x83
 #define ACPI_EC_COMMAND_QUERY	0x84
 
-static int acpi_ec_add (struct acpi_device *device);
+#define EC_POLLING		0xFF
+#define EC_BURST		0x00
+
+
 static int acpi_ec_remove (struct acpi_device *device, int type);
 static int acpi_ec_start (struct acpi_device *device);
 static int acpi_ec_stop (struct acpi_device *device, int type);
+static int acpi_ec_burst_add ( struct acpi_device *device);
+static int acpi_ec_polling_add ( struct acpi_device	*device);
 
 static struct acpi_driver acpi_ec_driver = {
 	.name =		ACPI_EC_DRIVER_NAME,
 	.class =	ACPI_EC_CLASS,
 	.ids =		ACPI_EC_HID,
 	.ops =		{
-				.add =		acpi_ec_add,
+				.add =		acpi_ec_polling_add,
 				.remove =	acpi_ec_remove,
 				.start =	acpi_ec_start,
 				.stop =		acpi_ec_stop,
 			},
 };
+union acpi_ec {
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+	} common;
 
-struct acpi_ec {
-	acpi_handle			handle;
-	unsigned long			uid;
-	unsigned long			gpe_bit;
-	struct acpi_generic_address	status_addr;
-	struct acpi_generic_address	command_addr;
-	struct acpi_generic_address	data_addr;
-	unsigned long			global_lock;
-	unsigned int			expect_event;
-	atomic_t			leaving_burst; /* 0 : No, 1 : Yes, 2: abort*/
-	atomic_t			pending_gpe;
-	struct semaphore		sem;
-	wait_queue_head_t		wait;
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+		unsigned int			expect_event;
+		atomic_t			leaving_burst; /* 0 : No, 1 : Yes, 2: abort*/
+		atomic_t			pending_gpe;
+		struct semaphore		sem;
+		wait_queue_head_t		wait;
+	}burst;
+
+	struct {
+		u32				mode;
+		acpi_handle			handle;
+		unsigned long			uid;
+		unsigned long			gpe_bit;
+		struct acpi_generic_address	status_addr;
+		struct acpi_generic_address	command_addr;
+		struct acpi_generic_address	data_addr;
+		unsigned long			global_lock;
+       		spinlock_t                      lock;
+	}polling;
 };
 
+static int acpi_ec_polling_wait ( union acpi_ec *ec, u8 event); 
+static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event);
+static int acpi_ec_polling_read ( union acpi_ec *ec, u8 address, u32 *data);
+static int acpi_ec_burst_read( union acpi_ec *ec, u8 address, u32 *data);
+static int acpi_ec_polling_write ( union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_burst_write ( union acpi_ec *ec, u8 address, u8 data);
+static int acpi_ec_polling_query ( union acpi_ec *ec, u32 *data);
+static int acpi_ec_burst_query ( union acpi_ec *ec, u32 *data);
+static void acpi_ec_gpe_polling_query ( void *ec_cxt);
+static void acpi_ec_gpe_burst_query ( void *ec_cxt);
+static u32 acpi_ec_gpe_polling_handler ( void *data);
+static u32 acpi_ec_gpe_burst_handler ( void *data);
+static acpi_status __init
+acpi_fake_ecdt_polling_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval);
+
+static acpi_status __init
+acpi_fake_ecdt_burst_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval);
+
+static int __init
+acpi_ec_polling_get_real_ecdt(void);
+static int __init
+acpi_ec_burst_get_real_ecdt(void);
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
-static struct acpi_ec	*ec_ecdt;
+static union acpi_ec	*ec_ecdt;
 
 /* External interfaces use first EC only, so remember */
 static struct acpi_device *first_ec;
+static int acpi_ec_polling_mode = EC_POLLING;
 
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
 
-static inline u32 acpi_ec_read_status(struct acpi_ec *ec)
+static inline u32 acpi_ec_read_status(union acpi_ec *ec)
 {
 	u32	status = 0;
 
-	acpi_hw_low_level_read(8, &status, &ec->status_addr);
+	acpi_hw_low_level_read(8, &status, &ec->common.status_addr);
 	return status;
 }
 
-static int acpi_ec_wait(struct acpi_ec *ec, unsigned int event)
+static int
+acpi_ec_wait (
+	union acpi_ec		*ec,
+	u8			event)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_wait (ec, event);
+	else
+		return acpi_ec_burst_wait (ec, event);
+}
+
+static int
+acpi_ec_polling_wait (
+	union acpi_ec		*ec,
+	u8			event)
+{
+	u32			acpi_ec_status = 0;
+	u32			i = ACPI_EC_UDELAY_COUNT;
+
+	if (!ec)
+		return -EINVAL;
+
+	/* Poll the EC status register waiting for the event to occur. */
+	switch (event) {
+	case ACPI_EC_EVENT_OBF:
+		do {
+			acpi_hw_low_level_read(8, &acpi_ec_status, &ec->common.status_addr);
+			if (acpi_ec_status & ACPI_EC_FLAG_OBF)
+				return 0;
+			udelay(ACPI_EC_UDELAY);
+		} while (--i>0);
+		break;
+	case ACPI_EC_EVENT_IBE:
+		do {
+			acpi_hw_low_level_read(8, &acpi_ec_status, &ec->common.status_addr);
+			if (!(acpi_ec_status & ACPI_EC_FLAG_IBF))
+				return 0;
+			udelay(ACPI_EC_UDELAY);
+		} while (--i>0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return -ETIME;
+}
+static int acpi_ec_burst_wait(union acpi_ec *ec, unsigned int event)
 {
 	int	result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_wait");
 
-	ec->expect_event = event;
+	ec->burst.expect_event = event;
 	smp_mb();
 
-	result = wait_event_interruptible_timeout(ec->wait,
-					!ec->expect_event,
+	result = wait_event_interruptible_timeout(ec->burst.wait,
+					!ec->burst.expect_event,
 					msecs_to_jiffies(ACPI_EC_DELAY));
 	
-	ec->expect_event = 0;
+	ec->burst.expect_event = 0;
 	smp_mb();
 
 	if (result < 0){
@@ -160,7 +270,7 @@
 
 static int
 acpi_ec_enter_burst_mode (
-	struct acpi_ec		*ec)
+	union acpi_ec		*ec)
 {
 	u32			tmp = 0;
 	int			status = 0;
@@ -170,43 +280,43 @@
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		!(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 		if (status){
-			acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+			acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 			return_VALUE(-EINVAL);
 		}
-		acpi_hw_low_level_read(8, &tmp, &ec->data_addr);
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		if(tmp != 0x90 ) {/* Burst ACK byte*/
 			return_VALUE(-EINVAL);
 		}
 	}
 
-	atomic_set(&ec->leaving_burst , 0);
+	atomic_set(&ec->burst.leaving_burst , 0);
 	return_VALUE(0);
 }
 
 static int
 acpi_ec_leave_burst_mode (
-	struct acpi_ec		*ec)
+	union acpi_ec		*ec)
 {
 	int			status =0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_leave_burst_mode");
 
-	atomic_set(&ec->leaving_burst , 1);
+	atomic_set(&ec->burst.leaving_burst , 1);
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_DISABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_FLAG_IBF);
 		if (status){
-			acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+			acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,"------->wait fail\n"));
 			return_VALUE(-EINVAL);
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		status = acpi_ec_read_status(ec);
 	}
 
@@ -215,7 +325,131 @@
 
 static int
 acpi_ec_read (
-	struct acpi_ec		*ec,
+	union acpi_ec		*ec,
+	u8			address,
+	u32			*data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_read(ec, address, data);
+	else
+		return acpi_ec_burst_read(ec, address, data);
+}
+static int
+acpi_ec_write (
+	union acpi_ec		*ec,
+	u8			address,
+	u8			data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_write(ec, address, data);
+	else
+		return acpi_ec_burst_write(ec, address, data);
+}
+static int
+acpi_ec_polling_read (
+	union acpi_ec		*ec,
+	u8			address,
+	u32			*data)
+{
+	acpi_status		status = AE_OK;
+	int			result = 0;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_read");
+
+	if (!ec || !data)
+		return_VALUE(-EINVAL);
+
+	*data = 0;
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Read [%02x] from address [%02x]\n",
+		*data, address));
+	
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+
+
+static int
+acpi_ec_polling_write (
+	union acpi_ec		*ec,
+	u8			address,
+	u8			data)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_write");
+
+	if (!ec)
+		return_VALUE(-EINVAL);
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
+	if (result)
+		goto end;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Wrote [%02x] to address [%02x]\n",
+		data, address));
+
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+
+static int
+acpi_ec_burst_read (
+	union acpi_ec		*ec,
 	u8			address,
 	u32			*data)
 {
@@ -230,51 +464,51 @@
 retry:
 	*data = 0;
 
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->sem);
+	down(&ec->burst.sem);
 
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
 
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_READ, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status) {
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, address, &ec->data_addr);
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status= acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_read(8, data, &ec->data_addr);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Read [%02x] from address [%02x]\n",
 		*data, address));
 	
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		while(atomic_read(&ec->pending_gpe)){
+		while(atomic_read(&ec->burst.pending_gpe)){
 			msleep(1);	
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto retry;
 	}
 
@@ -283,8 +517,8 @@
 
 
 static int
-acpi_ec_write (
-	struct acpi_ec		*ec,
+acpi_ec_burst_write (
+	union acpi_ec		*ec,
 	u8			address,
 	u8			data)
 {
@@ -297,14 +531,14 @@
 	if (!ec)
 		return_VALUE(-EINVAL);
 retry:
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
 	WARN_ON(in_interrupt());
-	down(&ec->sem);
+	down(&ec->burst.sem);
 
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
@@ -312,33 +546,33 @@
 	status = acpi_ec_read_status(ec);
 	if (status != -EINVAL &&
 		!(status & ACPI_EC_FLAG_BURST)){
-		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->command_addr);
+		acpi_hw_low_level_write(8, ACPI_EC_BURST_ENABLE, &ec->common.command_addr);
 		status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 		if (status)
 			goto end;
-		acpi_hw_low_level_read(8, &tmp, &ec->data_addr);
+		acpi_hw_low_level_read(8, &tmp, &ec->common.data_addr);
 		if(tmp != 0x90 ) /* Burst ACK byte*/
 			goto end;
 	}
 	/*Now we are in burst mode*/
 
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_WRITE, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status){
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, address, &ec->data_addr);
+	acpi_hw_low_level_write(8, address, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_write(8, data, &ec->data_addr);
+	acpi_hw_low_level_write(8, data, &ec->common.data_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBE);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (status)
 		goto end;
 
@@ -347,17 +581,17 @@
 
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		while(atomic_read(&ec->pending_gpe)){
+		while(atomic_read(&ec->burst.pending_gpe)){
 			msleep(1);	
 		}
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto retry;
 	}
 
@@ -370,7 +604,7 @@
 int
 ec_read(u8 addr, u8 *val)
 {
-	struct acpi_ec *ec;
+	union acpi_ec *ec;
 	int err;
 	u32 temp_data;
 
@@ -393,7 +627,7 @@
 int
 ec_write(u8 addr, u8 val)
 {
-	struct acpi_ec *ec;
+	union acpi_ec *ec;
 	int err;
 
 	if (!first_ec)
@@ -407,10 +641,66 @@
 }
 EXPORT_SYMBOL(ec_write);
 
-
 static int
 acpi_ec_query (
-	struct acpi_ec		*ec,
+	union acpi_ec		*ec,
+	u32			*data)
+{
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_polling_query(ec, data);
+	else
+		return acpi_ec_burst_query(ec, data);
+}
+static int
+acpi_ec_polling_query (
+	union acpi_ec		*ec,
+	u32			*data)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	unsigned long		flags = 0;
+	u32			glk = 0;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_query");
+
+	if (!ec || !data)
+		return_VALUE(-EINVAL);
+
+	*data = 0;
+
+	if (ec->common.global_lock) {
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status))
+			return_VALUE(-ENODEV);
+	}
+
+	/*
+	 * Query the EC to find out which _Qxx method we need to evaluate.
+	 * Note that successful completion of the query causes the ACPI_EC_SCI
+	 * bit to be cleared (and thus clearing the interrupt source).
+	 */
+	spin_lock_irqsave(&ec->polling.lock, flags);
+
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->common.command_addr);
+	result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
+	if (result)
+		goto end;
+
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	if (!*data)
+		result = -ENODATA;
+
+end:
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	if (ec->common.global_lock)
+		acpi_release_global_lock(glk);
+
+	return_VALUE(result);
+}
+static int
+acpi_ec_burst_query (
+	union acpi_ec		*ec,
 	u32			*data)
 {
 	int			status = 0;
@@ -422,13 +712,13 @@
 		return_VALUE(-EINVAL);
 	*data = 0;
 
-	if (ec->global_lock) {
+	if (ec->common.global_lock) {
 		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
 		if (ACPI_FAILURE(status))
 			return_VALUE(-ENODEV);
 	}
 
-	down(&ec->sem);
+	down(&ec->burst.sem);
 	if(acpi_ec_enter_burst_mode(ec))
 		goto end;
 	/*
@@ -436,28 +726,28 @@
 	 * Note that successful completion of the query causes the ACPI_EC_SCI
 	 * bit to be cleared (and thus clearing the interrupt source).
 	 */
-	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->command_addr);
+	acpi_hw_low_level_write(8, ACPI_EC_COMMAND_QUERY, &ec->common.command_addr);
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF);
 	if (status){
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		goto end;
 	}
 
-	acpi_hw_low_level_read(8, data, &ec->data_addr);
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_hw_low_level_read(8, data, &ec->common.data_addr);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 	if (!*data)
 		status = -ENODATA;
 
 end:
 	acpi_ec_leave_burst_mode(ec);
-	up(&ec->sem);
+	up(&ec->burst.sem);
 
-	if (ec->global_lock)
+	if (ec->common.global_lock)
 		acpi_release_global_lock(glk);
 
-	if(atomic_read(&ec->leaving_burst) == 2){
+	if(atomic_read(&ec->burst.leaving_burst) == 2){
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,"aborted, retry ...\n"));
-		acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 		status = -ENODATA;
 	}
 	return_VALUE(status);
@@ -468,7 +758,7 @@
                                 Event Management
    -------------------------------------------------------------------------- */
 
-struct acpi_ec_query_data {
+union acpi_ec_query_data {
 	acpi_handle		handle;
 	u8			data;
 };
@@ -477,7 +767,59 @@
 acpi_ec_gpe_query (
 	void			*ec_cxt)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) ec_cxt;
+	if (acpi_ec_polling_mode) 
+		acpi_ec_gpe_polling_query(ec_cxt);
+	else
+		acpi_ec_gpe_burst_query(ec_cxt);
+}
+
+static void
+acpi_ec_gpe_polling_query (
+	void			*ec_cxt)
+{
+	union acpi_ec		*ec = (union acpi_ec *) ec_cxt;
+	u32			value = 0;
+	unsigned long		flags = 0;
+	static char		object_name[5] = {'_','Q','0','0','\0'};
+	const char		hex[] = {'0','1','2','3','4','5','6','7',
+				         '8','9','A','B','C','D','E','F'};
+
+	ACPI_FUNCTION_TRACE("acpi_ec_gpe_query");
+
+	if (!ec_cxt)
+		goto end;
+
+	spin_lock_irqsave(&ec->polling.lock, flags);
+	acpi_hw_low_level_read(8, &value, &ec->common.command_addr);
+	spin_unlock_irqrestore(&ec->polling.lock, flags);
+
+	/* TBD: Implement asynch events!
+	 * NOTE: All we care about are EC-SCI's.  Other EC events are
+	 * handled via polling (yuck!).  This is because some systems
+	 * treat EC-SCIs as level (versus EDGE!) triggered, preventing
+	 *  a purely interrupt-driven approach (grumble, grumble).
+	 */
+	if (!(value & ACPI_EC_FLAG_SCI))
+		goto end;
+
+	if (acpi_ec_query(ec, &value))
+		goto end;
+
+	object_name[2] = hex[((value >> 4) & 0x0F)];
+	object_name[3] = hex[(value & 0x0F)];
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s\n", object_name));
+
+	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
+
+end:	
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
+}
+static void
+acpi_ec_gpe_burst_query (
+	void			*ec_cxt)
+{
+	union acpi_ec		*ec = (union acpi_ec *) ec_cxt;
 	u32			value;
 	int			result = -ENODATA;
 	static char		object_name[5] = {'_','Q','0','0','\0'};
@@ -497,9 +839,9 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s\n", object_name));
 
-	acpi_evaluate_object(ec->handle, object_name, NULL, NULL);
+	acpi_evaluate_object(ec->common.handle, object_name, NULL, NULL);
 end:	
-	atomic_dec(&ec->pending_gpe);
+	atomic_dec(&ec->burst.pending_gpe);
 	return;
 }
 
@@ -507,48 +849,77 @@
 acpi_ec_gpe_handler (
 	void			*data)
 {
+	if (acpi_ec_polling_mode) 
+		return acpi_ec_gpe_polling_handler(data);
+	else
+		return acpi_ec_gpe_burst_handler(data);	
+}
+static u32
+acpi_ec_gpe_polling_handler (
+	void			*data)
+{
 	acpi_status		status = AE_OK;
-	u32			value;
-	struct acpi_ec		*ec = (struct acpi_ec *) data;
+	union acpi_ec		*ec = (union acpi_ec *) data;
 
 	if (!ec)
 		return ACPI_INTERRUPT_NOT_HANDLED;
 
-	acpi_disable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+	acpi_disable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
+
+	status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
+		acpi_ec_gpe_query, ec);
+
+	if (status == AE_OK)
+		return ACPI_INTERRUPT_HANDLED;
+	else
+		return ACPI_INTERRUPT_NOT_HANDLED;
+}
+static u32
+acpi_ec_gpe_burst_handler (
+	void			*data)
+{
+	acpi_status		status = AE_OK;
+	u32			value;
+	union acpi_ec		*ec = (union acpi_ec *) data;
+
+	if (!ec)
+		return ACPI_INTERRUPT_NOT_HANDLED;
+
+	acpi_disable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 
 	value = acpi_ec_read_status(ec);
 
 	if((value & ACPI_EC_FLAG_IBF) &&
 		!(value & ACPI_EC_FLAG_BURST) &&
-			(atomic_read(&ec->leaving_burst) == 0)) { 
+			(atomic_read(&ec->burst.leaving_burst) == 0)) { 
 	/*
 	 * the embedded controller disables 
 	 * burst mode for any reason other 
 	 * than the burst disable command
 	 * to process critical event.
 	 */
-		atomic_set(&ec->leaving_burst , 2); /* block current pending transaction
+		atomic_set(&ec->burst.leaving_burst , 2); /* block current pending transaction
 					and retry */
-		wake_up(&ec->wait);
+		wake_up(&ec->burst.wait);
 	}else {
-		if ((ec->expect_event == ACPI_EC_EVENT_OBF &&
+		if ((ec->burst.expect_event == ACPI_EC_EVENT_OBF &&
 				(value & ACPI_EC_FLAG_OBF)) ||
-	    			(ec->expect_event == ACPI_EC_EVENT_IBE &&
+	    			(ec->burst.expect_event == ACPI_EC_EVENT_IBE &&
 				!(value & ACPI_EC_FLAG_IBF))) {
-			ec->expect_event = 0;
-			wake_up(&ec->wait);
+			ec->burst.expect_event = 0;
+			wake_up(&ec->burst.wait);
 			return ACPI_INTERRUPT_HANDLED;
 		}
 	}
 
 	if (value & ACPI_EC_FLAG_SCI){
-		atomic_add(1, &ec->pending_gpe) ;
+		atomic_add(1, &ec->burst.pending_gpe) ;
 		status = acpi_os_queue_for_execution(OSD_PRIORITY_GPE,
 						acpi_ec_gpe_query, ec);
 		return status == AE_OK ?
 		ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
 	} 
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_ISR);
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_ISR);
 	return status == AE_OK ?
 		ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
 }
@@ -585,7 +956,7 @@
 	void			*region_context)
 {
 	int			result = 0;
-	struct acpi_ec		*ec = NULL;
+	union acpi_ec		*ec = NULL;
 	u64			temp = *value;
 	acpi_integer		f_v = 0;
 	int 			i = 0;
@@ -600,7 +971,7 @@
 		return_VALUE(AE_BAD_PARAMETER);
 	}
 
-	ec = (struct acpi_ec *) handler_context;
+	ec = (union acpi_ec *) handler_context;
 
 next_byte:
 	switch (function) {
@@ -661,7 +1032,7 @@
 static int
 acpi_ec_read_info (struct seq_file *seq, void *offset)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) seq->private;
+	union acpi_ec		*ec = (union acpi_ec *) seq->private;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_read_info");
 
@@ -669,12 +1040,12 @@
 		goto end;
 
 	seq_printf(seq, "gpe bit:                 0x%02x\n",
-		(u32) ec->gpe_bit);
+		(u32) ec->common.gpe_bit);
 	seq_printf(seq, "ports:                   0x%02x, 0x%02x\n",
-		(u32) ec->status_addr.address, (u32) ec->data_addr.address);
+		(u32) ec->common.status_addr.address, (u32) ec->common.data_addr.address);
 	seq_printf(seq, "use global lock:         %s\n",
-		ec->global_lock?"yes":"no");
-	acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR);
+		ec->common.global_lock?"yes":"no");
+	acpi_enable_gpe(NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
 end:
 	return_VALUE(0);
@@ -697,7 +1068,7 @@
 acpi_ec_add_fs (
 	struct acpi_device	*device)
 {
-	struct proc_dir_entry	*entry;
+	struct proc_dir_entry	*entry = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_add_fs");
 
@@ -744,13 +1115,14 @@
                                Driver Interface
    -------------------------------------------------------------------------- */
 
+
 static int
-acpi_ec_add (
+acpi_ec_polling_add (
 	struct acpi_device	*device)
 {
-	int			result;
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 	unsigned long		uid;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_add");
@@ -758,39 +1130,36 @@
 	if (!device)
 		return_VALUE(-EINVAL);
 
-	ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec)
 		return_VALUE(-ENOMEM);
-	memset(ec, 0, sizeof(struct acpi_ec));
+	memset(ec, 0, sizeof(union acpi_ec));
 
-	ec->handle = device->handle;
-	ec->uid = -1;
- 	atomic_set(&ec->pending_gpe, 0);
- 	atomic_set(&ec->leaving_burst , 1);
- 	init_MUTEX(&ec->sem);
- 	init_waitqueue_head(&ec->wait);
+	ec->common.handle = device->handle;
+	ec->common.uid = -1;
+	spin_lock_init(&ec->polling.lock);
 	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
 	acpi_driver_data(device) = ec;
 
 	/* Use the global lock for all EC transactions? */
-	acpi_evaluate_integer(ec->handle, "_GLK", NULL, &ec->global_lock);
+	acpi_evaluate_integer(ec->common.handle, "_GLK", NULL, &ec->common.global_lock);
 
 	/* If our UID matches the UID for the ECDT-enumerated EC,
 	   we now have the *real* EC info, so kill the makeshift one.*/
-	acpi_evaluate_integer(ec->handle, "_UID", NULL, &uid);
-	if (ec_ecdt && ec_ecdt->uid == uid) {
+	acpi_evaluate_integer(ec->common.handle, "_UID", NULL, &uid);
+	if (ec_ecdt && ec_ecdt->common.uid == uid) {
 		acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
-
-		acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit, &acpi_ec_gpe_handler);
+	
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit, &acpi_ec_gpe_handler);
 
 		kfree(ec_ecdt);
 	}
 
 	/* Get GPE bit assignment (EC events). */
 	/* TODO: Add support for _GPE returning a package */
-	status = acpi_evaluate_integer(ec->handle, "_GPE", NULL, &ec->gpe_bit);
+	status = acpi_evaluate_integer(ec->common.handle, "_GPE", NULL, &ec->common.gpe_bit);
 	if (ACPI_FAILURE(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 			"Error obtaining GPE bit assignment\n"));
@@ -804,7 +1173,78 @@
 
 	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
 		acpi_device_name(device), acpi_device_bid(device),
-		(u32) ec->gpe_bit);
+		(u32) ec->common.gpe_bit);
+
+	if (!first_ec)
+		first_ec = device;
+
+end:
+	if (result)
+		kfree(ec);
+
+	return_VALUE(result);
+}
+static int
+acpi_ec_burst_add (
+	struct acpi_device	*device)
+{
+	int			result = 0;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
+	unsigned long		uid;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_add");
+
+	if (!device)
+		return_VALUE(-EINVAL);
+
+	ec = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
+	if (!ec)
+		return_VALUE(-ENOMEM);
+	memset(ec, 0, sizeof(union acpi_ec));
+
+	ec->common.handle = device->handle;
+	ec->common.uid = -1;
+ 	atomic_set(&ec->burst.pending_gpe, 0);
+ 	atomic_set(&ec->burst.leaving_burst , 1);
+ 	init_MUTEX(&ec->burst.sem);
+ 	init_waitqueue_head(&ec->burst.wait);
+	strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_EC_CLASS);
+	acpi_driver_data(device) = ec;
+
+	/* Use the global lock for all EC transactions? */
+	acpi_evaluate_integer(ec->common.handle, "_GLK", NULL, &ec->common.global_lock);
+
+	/* If our UID matches the UID for the ECDT-enumerated EC,
+	   we now have the *real* EC info, so kill the makeshift one.*/
+	acpi_evaluate_integer(ec->common.handle, "_UID", NULL, &uid);
+	if (ec_ecdt && ec_ecdt->common.uid == uid) {
+		acpi_remove_address_space_handler(ACPI_ROOT_OBJECT,
+			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
+
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit, &acpi_ec_gpe_handler);
+
+		kfree(ec_ecdt);
+	}
+
+	/* Get GPE bit assignment (EC events). */
+	/* TODO: Add support for _GPE returning a package */
+	status = acpi_evaluate_integer(ec->common.handle, "_GPE", NULL, &ec->common.gpe_bit);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+			"Error obtaining GPE bit assignment\n"));
+		result = -ENODEV;
+		goto end;
+	}
+
+	result = acpi_ec_add_fs(device);
+	if (result)
+		goto end;
+
+	printk(KERN_INFO PREFIX "%s [%s] (gpe %d)\n",
+		acpi_device_name(device), acpi_device_bid(device),
+		(u32) ec->common.gpe_bit);
 
 	if (!first_ec)
 		first_ec = device;
@@ -822,7 +1262,7 @@
 	struct acpi_device	*device,
 	int			type)
 {
-	struct acpi_ec		*ec;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_remove");
 
@@ -844,7 +1284,7 @@
 	struct acpi_resource	*resource,
 	void			*context)
 {
-	struct acpi_ec		*ec = (struct acpi_ec *) context;
+	union acpi_ec		*ec = (union acpi_ec *) context;
 	struct acpi_generic_address *addr;
 
 	if (resource->id != ACPI_RSTYPE_IO) {
@@ -856,10 +1296,10 @@
 	 * the second address region returned is the status/command
 	 * port.
 	 */
-	if (ec->data_addr.register_bit_width == 0) {
-		addr = &ec->data_addr;
-	} else if (ec->command_addr.register_bit_width == 0) {
-		addr = &ec->command_addr;
+	if (ec->common.data_addr.register_bit_width == 0) {
+		addr = &ec->common.data_addr;
+	} else if (ec->common.command_addr.register_bit_width == 0) {
+		addr = &ec->common.command_addr;
 	} else {
 		return AE_CTRL_TERMINATE;
 	}
@@ -877,8 +1317,8 @@
 acpi_ec_start (
 	struct acpi_device	*device)
 {
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_start");
 
@@ -893,35 +1333,36 @@
 	/*
 	 * Get I/O port addresses. Convert to GAS format.
 	 */
-	status = acpi_walk_resources(ec->handle, METHOD_NAME__CRS,
+	status = acpi_walk_resources(ec->common.handle, METHOD_NAME__CRS,
 		acpi_ec_io_ports, ec);
-	if (ACPI_FAILURE(status) || ec->command_addr.register_bit_width == 0) {
+	if (ACPI_FAILURE(status) || ec->common.command_addr.register_bit_width == 0) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error getting I/O port addresses"));
 		return_VALUE(-ENODEV);
 	}
 
-	ec->status_addr = ec->command_addr;
+	ec->common.status_addr = ec->common.command_addr;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02x, ports=0x%2x,0x%2x\n",
-		(u32) ec->gpe_bit, (u32) ec->command_addr.address,
-		(u32) ec->data_addr.address));
+		(u32) ec->common.gpe_bit, (u32) ec->common.command_addr.address,
+		(u32) ec->common.data_addr.address));
+
 
 	/*
 	 * Install GPE handler
 	 */
-	status = acpi_install_gpe_handler(NULL, ec->gpe_bit,
+	status = acpi_install_gpe_handler(NULL, ec->common.gpe_bit,
 		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler, ec);
 	if (ACPI_FAILURE(status)) {
 		return_VALUE(-ENODEV);
 	}
-	acpi_set_gpe_type (NULL, ec->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe (NULL, ec->gpe_bit, ACPI_NOT_ISR);
+	acpi_set_gpe_type (NULL, ec->common.gpe_bit, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe (NULL, ec->common.gpe_bit, ACPI_NOT_ISR);
 
-	status = acpi_install_address_space_handler (ec->handle,
+	status = acpi_install_address_space_handler (ec->common.handle,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
 			&acpi_ec_space_setup, ec);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec->gpe_bit, &acpi_ec_gpe_handler);
+		acpi_remove_gpe_handler(NULL, ec->common.gpe_bit, &acpi_ec_gpe_handler);
 		return_VALUE(-ENODEV);
 	}
 
@@ -934,8 +1375,8 @@
 	struct acpi_device	*device,
 	int			type)
 {
-	acpi_status		status;
-	struct acpi_ec		*ec;
+	acpi_status		status = AE_OK;
+	union acpi_ec		*ec = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_stop");
 
@@ -944,12 +1385,12 @@
 
 	ec = acpi_driver_data(device);
 
-	status = acpi_remove_address_space_handler(ec->handle,
+	status = acpi_remove_address_space_handler(ec->common.handle,
 		ACPI_ADR_SPACE_EC, &acpi_ec_space_handler);
 	if (ACPI_FAILURE(status))
 		return_VALUE(-ENODEV);
 
-	status = acpi_remove_gpe_handler(NULL, ec->gpe_bit, &acpi_ec_gpe_handler);
+	status = acpi_remove_gpe_handler(NULL, ec->common.gpe_bit, &acpi_ec_gpe_handler);
 	if (ACPI_FAILURE(status))
 		return_VALUE(-ENODEV);
 
@@ -963,26 +1404,76 @@
 	void		*context,
 	void		**retval)
 {
+
+	if (acpi_ec_polling_mode)
+		return acpi_fake_ecdt_polling_callback(handle,
+			Level, context, retval);
+	else
+		return acpi_fake_ecdt_burst_callback(handle,
+			Level, context, retval);
+}
+
+static acpi_status __init
+acpi_fake_ecdt_polling_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval)
+{
 	acpi_status	status;
 
 	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
 		acpi_ec_io_ports, ec_ecdt);
 	if (ACPI_FAILURE(status))
 		return status;
-	ec_ecdt->status_addr = ec_ecdt->command_addr;
+	ec_ecdt->common.status_addr = ec_ecdt->common.command_addr;
 
-	ec_ecdt->uid = -1;
-	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid);
+	ec_ecdt->common.uid = -1;
+	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->common.uid);
 
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->gpe_bit);
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->common.gpe_bit);
 	if (ACPI_FAILURE(status))
 		return status;
-	ec_ecdt->global_lock = TRUE;
-	ec_ecdt->handle = handle;
+	spin_lock_init(&ec_ecdt->polling.lock);
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.handle = handle;
 
 	printk(KERN_INFO PREFIX  "GPE=0x%02x, ports=0x%2x, 0x%2x\n",
-		(u32) ec_ecdt->gpe_bit, (u32) ec_ecdt->command_addr.address,
-		(u32) ec_ecdt->data_addr.address);
+		(u32) ec_ecdt->common.gpe_bit, (u32) ec_ecdt->common.command_addr.address,
+		(u32) ec_ecdt->common.data_addr.address);
+
+	return AE_CTRL_TERMINATE;
+}
+
+static acpi_status __init
+acpi_fake_ecdt_burst_callback (
+	acpi_handle	handle,
+	u32		Level,
+	void		*context,
+	void		**retval)
+{
+	acpi_status	status;
+
+	init_MUTEX(&ec_ecdt->burst.sem);
+	init_waitqueue_head(&ec_ecdt->burst.wait);
+	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
+		acpi_ec_io_ports, ec_ecdt);
+	if (ACPI_FAILURE(status))
+		return status;
+	ec_ecdt->common.status_addr = ec_ecdt->common.command_addr;
+
+	ec_ecdt->common.uid = -1;
+	acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->common.uid);
+
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec_ecdt->common.gpe_bit);
+	if (ACPI_FAILURE(status))
+		return status;
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.handle = handle;
+
+	printk(KERN_INFO PREFIX  "GPE=0x%02x, ports=0x%2x, 0x%2x\n",
+		(u32) ec_ecdt->common.gpe_bit, (u32) ec_ecdt->common.command_addr.address,
+		(u32) ec_ecdt->common.data_addr.address);
 
 	return AE_CTRL_TERMINATE;
 }
@@ -1005,12 +1496,12 @@
 
 	printk(KERN_INFO PREFIX "Try to make an fake ECDT\n");
 
-	ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec_ecdt) {
 		ret = -ENOMEM;
 		goto error;
 	}
-	memset(ec_ecdt, 0, sizeof(struct acpi_ec));
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
 
 	status = acpi_get_devices (ACPI_EC_HID,
 				acpi_fake_ecdt_callback,
@@ -1031,6 +1522,60 @@
 static int __init
 acpi_ec_get_real_ecdt(void)
 {
+	if (acpi_ec_polling_mode)
+		return acpi_ec_polling_get_real_ecdt();
+	else
+		return acpi_ec_burst_get_real_ecdt();
+}
+
+static int __init
+acpi_ec_polling_get_real_ecdt(void)
+{
+	acpi_status		status;
+	struct acpi_table_ecdt 	*ecdt_ptr;
+
+	status = acpi_get_firmware_table("ECDT", 1, ACPI_LOGICAL_ADDRESSING, 
+		(struct acpi_table_header **) &ecdt_ptr);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	printk(KERN_INFO PREFIX "Found ECDT\n");
+
+	/*
+	 * Generate a temporary ec context to use until the namespace is scanned
+	 */
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
+	if (!ec_ecdt)
+		return -ENOMEM;
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
+
+	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
+	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
+	spin_lock_init(&ec_ecdt->polling.lock);
+	/* use the GL just to be safe */
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.uid = ecdt_ptr->uid;
+
+	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->common.handle);
+	if (ACPI_FAILURE(status)) {
+		goto error;
+	}
+
+	return 0;
+error:
+	printk(KERN_ERR PREFIX "Could not use ECDT\n");
+	kfree(ec_ecdt);
+	ec_ecdt = NULL;
+
+	return -ENODEV;
+}
+
+
+static int __init
+acpi_ec_burst_get_real_ecdt(void)
+{
 	acpi_status		status;
 	struct acpi_table_ecdt 	*ecdt_ptr;
 
@@ -1044,22 +1589,22 @@
 	/*
 	 * Generate a temporary ec context to use until the namespace is scanned
 	 */
-	ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+	ec_ecdt = kmalloc(sizeof(union acpi_ec), GFP_KERNEL);
 	if (!ec_ecdt)
 		return -ENOMEM;
-	memset(ec_ecdt, 0, sizeof(struct acpi_ec));
+	memset(ec_ecdt, 0, sizeof(union acpi_ec));
 
- 	init_MUTEX(&ec_ecdt->sem);
- 	init_waitqueue_head(&ec_ecdt->wait);
-	ec_ecdt->command_addr = ecdt_ptr->ec_control;
-	ec_ecdt->status_addr = ecdt_ptr->ec_control;
-	ec_ecdt->data_addr = ecdt_ptr->ec_data;
-	ec_ecdt->gpe_bit = ecdt_ptr->gpe_bit;
+ 	init_MUTEX(&ec_ecdt->burst.sem);
+ 	init_waitqueue_head(&ec_ecdt->burst.wait);
+	ec_ecdt->common.command_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.status_addr = ecdt_ptr->ec_control;
+	ec_ecdt->common.data_addr = ecdt_ptr->ec_data;
+	ec_ecdt->common.gpe_bit = ecdt_ptr->gpe_bit;
 	/* use the GL just to be safe */
-	ec_ecdt->global_lock = TRUE;
-	ec_ecdt->uid = ecdt_ptr->uid;
+	ec_ecdt->common.global_lock = TRUE;
+	ec_ecdt->common.uid = ecdt_ptr->uid;
 
-	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
+	status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->common.handle);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}
@@ -1092,20 +1637,20 @@
 	/*
 	 * Install GPE handler
 	 */
-	status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe_bit,
+	status = acpi_install_gpe_handler(NULL, ec_ecdt->common.gpe_bit,
 		ACPI_GPE_EDGE_TRIGGERED, &acpi_ec_gpe_handler,
 		ec_ecdt);
 	if (ACPI_FAILURE(status)) {
 		goto error;
 	}
-	acpi_set_gpe_type (NULL, ec_ecdt->gpe_bit, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe (NULL, ec_ecdt->gpe_bit, ACPI_NOT_ISR);
+	acpi_set_gpe_type (NULL, ec_ecdt->common.gpe_bit, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe (NULL, ec_ecdt->common.gpe_bit, ACPI_NOT_ISR);
 
 	status = acpi_install_address_space_handler (ACPI_ROOT_OBJECT,
 			ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
 			&acpi_ec_space_setup, ec_ecdt);
 	if (ACPI_FAILURE(status)) {
-		acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit,
+		acpi_remove_gpe_handler(NULL, ec_ecdt->common.gpe_bit,
 			&acpi_ec_gpe_handler);
 		goto error;
 	}
@@ -1123,7 +1668,7 @@
 
 static int __init acpi_ec_init (void)
 {
-	int			result;
+	int			result = 0;
 
 	ACPI_FUNCTION_TRACE("acpi_ec_init");
 
@@ -1166,4 +1711,24 @@
 	acpi_fake_ecdt_enabled = 1;
 	return 0;
 }
+
 __setup("acpi_fake_ecdt", acpi_fake_ecdt_setup);
+static int __init acpi_ec_set_polling_mode(char *str)
+{
+	int burst;
+
+	if (!get_option(&str, &burst))
+		return 0;
+
+	if (burst) {
+		acpi_ec_polling_mode = EC_BURST;
+		acpi_ec_driver.ops.add = acpi_ec_burst_add;
+	} else {
+		acpi_ec_polling_mode = EC_POLLING;
+		acpi_ec_driver.ops.add = acpi_ec_polling_add;
+	}
+	printk(KERN_INFO PREFIX "EC %s mode.\n",
+		burst ? "burst": "polling");
+	return 0;
+}
+__setup("ec_burst=", acpi_ec_set_polling_mode);
diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c
index babdf76..1f76a40 100644
--- a/drivers/acpi/hotkey.c
+++ b/drivers/acpi/hotkey.c
@@ -1,5 +1,5 @@
-/* 
- *  hotkey.c - ACPI Hotkey Driver ($Revision:$)
+/*
+ *  hotkey.c - ACPI Hotkey Driver ($Revision: 0.2 $)
  *
  *  Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
  *
@@ -51,17 +51,18 @@
 #define ACPI_HOTKEY_POLLING 0x2
 #define ACPI_UNDEFINED_EVENT    0xf
 
-#define MAX_CONFIG_RECORD_LEN   80
-#define MAX_NAME_PATH_LEN   80
-#define MAX_CALL_PARM       80
+#define RESULT_STR_LEN	    80
 
-#define IS_EVENT(e)       0xff	/* ((e) & 0x40000000)  */
-#define IS_POLL(e)      0xff	/* (~((e) & 0x40000000))  */
+#define ACTION_METHOD	0
+#define POLL_METHOD	1
 
+#define IS_EVENT(e)       	((e) <= 10000 && (e) >0)
+#define IS_POLL(e)      	((e) > 10000)
+#define IS_OTHERS(e)		((e)<=0 || (e)>=20000)
 #define _COMPONENT              ACPI_HOTKEY_COMPONENT
 ACPI_MODULE_NAME("acpi_hotkey")
 
-    MODULE_AUTHOR("luming.yu@intel.com");
+MODULE_AUTHOR("luming.yu@intel.com");
 MODULE_DESCRIPTION(ACPI_HOTK_NAME);
 MODULE_LICENSE("GPL");
 
@@ -114,7 +115,7 @@
 	char *action_method;	/* action method */
 };
 
-/* 
+/*
  * There are two ways to poll status
  * 1. directy call read_xxx method, without any arguments passed in
  * 2. call write_xxx method, with arguments passed in, you need
@@ -131,7 +132,7 @@
 	char *poll_method;	/* poll method */
 	acpi_handle action_handle;	/* acpi handle attached action method */
 	char *action_method;	/* action method */
-	void *poll_result;	/* polling_result */
+	union acpi_object *poll_result;	/* polling_result */
 	struct proc_dir_entry *proc;
 };
 
@@ -162,20 +163,25 @@
 		},
 };
 
+static void free_hotkey_device(union acpi_hotkey *key);
+static void free_hotkey_buffer(union acpi_hotkey *key);
+static void free_poll_hotkey_buffer(union acpi_hotkey *key);
 static int hotkey_open_config(struct inode *inode, struct file *file);
+static int hotkey_poll_open_config(struct inode *inode, struct file *file);
 static ssize_t hotkey_write_config(struct file *file,
 				   const char __user * buffer,
 				   size_t count, loff_t * data);
-static ssize_t hotkey_write_poll_config(struct file *file,
-					const char __user * buffer,
-					size_t count, loff_t * data);
 static int hotkey_info_open_fs(struct inode *inode, struct file *file);
 static int hotkey_action_open_fs(struct inode *inode, struct file *file);
 static ssize_t hotkey_execute_aml_method(struct file *file,
 					 const char __user * buffer,
 					 size_t count, loff_t * data);
 static int hotkey_config_seq_show(struct seq_file *seq, void *offset);
+static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset);
 static int hotkey_polling_open_fs(struct inode *inode, struct file *file);
+static union acpi_hotkey *get_hotkey_by_event(struct
+			      acpi_hotkey_list
+			      *hotkey_list, int event);
 
 /* event based config */
 static struct file_operations hotkey_config_fops = {
@@ -188,9 +194,9 @@
 
 /* polling based config */
 static struct file_operations hotkey_poll_config_fops = {
-	.open = hotkey_open_config,
+	.open = hotkey_poll_open_config,
 	.read = seq_read,
-	.write = hotkey_write_poll_config,
+	.write = hotkey_write_config,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
@@ -227,7 +233,7 @@
 {
 	ACPI_FUNCTION_TRACE("hotkey_info_seq_show");
 
-	seq_printf(seq, "Hotkey generic driver ver: %s", HOTKEY_ACPI_VERSION);
+	seq_printf(seq, "Hotkey generic driver ver: %s\n", HOTKEY_ACPI_VERSION);
 
 	return_VALUE(0);
 }
@@ -239,27 +245,35 @@
 
 static char *format_result(union acpi_object *object)
 {
-	char *buf = (char *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-
-	memset(buf, 0, sizeof(union acpi_object));
+	char *buf = NULL;
+	
+	buf = (char *)kmalloc(RESULT_STR_LEN, GFP_KERNEL);
+	if (buf)
+		memset(buf, 0, RESULT_STR_LEN);
+	else
+		goto do_fail;
 
 	/* Now, just support integer type */
 	if (object->type == ACPI_TYPE_INTEGER)
-		sprintf(buf, "%d", (u32) object->integer.value);
-
-	return buf;
+		sprintf(buf, "%d\n", (u32) object->integer.value);
+do_fail:
+	return (buf);
 }
 
 static int hotkey_polling_seq_show(struct seq_file *seq, void *offset)
 {
 	struct acpi_polling_hotkey *poll_hotkey =
 	    (struct acpi_polling_hotkey *)seq->private;
+	char *buf;
 
 	ACPI_FUNCTION_TRACE("hotkey_polling_seq_show");
 
-	if (poll_hotkey->poll_result)
-		seq_printf(seq, "%s", format_result(poll_hotkey->poll_result));
-
+	if (poll_hotkey->poll_result){
+		buf = format_result(poll_hotkey->poll_result);
+		if(buf)
+			seq_printf(seq, "%s", buf);
+		kfree(buf);
+	}
 	return_VALUE(0);
 }
 
@@ -276,19 +290,19 @@
 /* Mapping external hotkey number to standardized hotkey event num */
 static int hotkey_get_internal_event(int event, struct acpi_hotkey_list *list)
 {
-	struct list_head *entries, *next;
-	int val = 0;
+	struct list_head *entries;
+	int val = -1;
 
 	ACPI_FUNCTION_TRACE("hotkey_get_internal_event");
 
-	list_for_each_safe(entries, next, list->entries) {
+	list_for_each(entries, list->entries) {
 		union acpi_hotkey *key =
 		    container_of(entries, union acpi_hotkey, entries);
 		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT
-		    && key->event_hotkey.external_hotkey_num == event)
+		    && key->event_hotkey.external_hotkey_num == event){
 			val = key->link.hotkey_standard_num;
-		else
-			val = -1;
+			break;
+		}
 	}
 
 	return_VALUE(val);
@@ -306,7 +320,7 @@
 		return_VOID;
 
 	internal_event = hotkey_get_internal_event(event, &global_hotkey_list);
-	acpi_bus_generate_event(device, event, 0);
+	acpi_bus_generate_event(device, internal_event, 0);
 
 	return_VOID;
 }
@@ -329,13 +343,17 @@
 static int create_polling_proc(union acpi_hotkey *device)
 {
 	struct proc_dir_entry *proc;
+	char  proc_name[80];
 	mode_t mode;
 
 	ACPI_FUNCTION_TRACE("create_polling_proc");
 	mode = S_IFREG | S_IRUGO | S_IWUGO;
 
-	proc = create_proc_entry(device->poll_hotkey.action_method,
-				 mode, hotkey_proc_dir);
+	sprintf(proc_name, "%d", device->link.hotkey_standard_num);
+	/*
+	strcat(proc_name, device->poll_hotkey.poll_method);
+	*/
+	proc = create_proc_entry(proc_name, mode, hotkey_proc_dir);
 
 	if (!proc) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
@@ -353,23 +371,6 @@
 	return_VALUE(0);
 }
 
-static int is_valid_acpi_path(const char *pathname)
-{
-	acpi_handle handle;
-	acpi_status status;
-	ACPI_FUNCTION_TRACE("is_valid_acpi_path");
-
-	status = acpi_get_handle(NULL, (char *)pathname, &handle);
-	return_VALUE(!ACPI_FAILURE(status));
-}
-
-static int is_valid_hotkey(union acpi_hotkey *device)
-{
-	ACPI_FUNCTION_TRACE("is_valid_hotkey");
-	/* Implement valid check */
-	return_VALUE(1);
-}
-
 static int hotkey_add(union acpi_hotkey *device)
 {
 	int status = 0;
@@ -378,15 +379,11 @@
 	ACPI_FUNCTION_TRACE("hotkey_add");
 
 	if (device->link.hotkey_type == ACPI_HOTKEY_EVENT) {
-		status =
-		    acpi_bus_get_device(device->event_hotkey.bus_handle, &dev);
-		if (status)
-			return_VALUE(status);
-
+		acpi_bus_get_device(device->event_hotkey.bus_handle, &dev);
 		status = acpi_install_notify_handler(dev->handle,
-						     ACPI_SYSTEM_NOTIFY,
+						     ACPI_DEVICE_NOTIFY,
 						     acpi_hotkey_notify_handler,
-						     device);
+						     dev);
 	} else			/* Add polling hotkey */
 		create_polling_proc(device);
 
@@ -409,84 +406,143 @@
 		if (key->link.hotkey_standard_num ==
 		    device->link.hotkey_standard_num) {
 			list_del(&key->link.entries);
-			remove_proc_entry(key->poll_hotkey.action_method,
-					  hotkey_proc_dir);
+			free_hotkey_device(key);
 			global_hotkey_list.count--;
 			break;
 		}
 	}
+	kfree(device);
 	return_VALUE(0);
 }
 
-static void hotkey_update(union acpi_hotkey *key)
+static int  hotkey_update(union acpi_hotkey *key)
 {
-	struct list_head *entries, *next;
+	struct list_head *entries;
 
 	ACPI_FUNCTION_TRACE("hotkey_update");
 
-	list_for_each_safe(entries, next, global_hotkey_list.entries) {
-		union acpi_hotkey *key =
+	list_for_each(entries, global_hotkey_list.entries) {
+		union acpi_hotkey *tmp=
 		    container_of(entries, union acpi_hotkey, entries);
-		if (key->link.hotkey_standard_num ==
+		if (tmp->link.hotkey_standard_num ==
 		    key->link.hotkey_standard_num) {
-			key->event_hotkey.bus_handle =
-			    key->event_hotkey.bus_handle;
-			key->event_hotkey.external_hotkey_num =
-			    key->event_hotkey.external_hotkey_num;
-			key->event_hotkey.action_handle =
-			    key->event_hotkey.action_handle;
-			key->event_hotkey.action_method =
-			    key->event_hotkey.action_method;
+			if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
+				free_hotkey_buffer(tmp);
+				tmp->event_hotkey.bus_handle =
+			    		key->event_hotkey.bus_handle;
+				tmp->event_hotkey.external_hotkey_num =
+			    		key->event_hotkey.external_hotkey_num;
+				tmp->event_hotkey.action_handle =
+			    		key->event_hotkey.action_handle;
+				tmp->event_hotkey.action_method =
+			    		key->event_hotkey.action_method;
+				kfree(key);
+			} else {
+				/*
+				char  proc_name[80];
+
+				sprintf(proc_name, "%d", tmp->link.hotkey_standard_num);
+				strcat(proc_name, tmp->poll_hotkey.poll_method);
+				remove_proc_entry(proc_name,hotkey_proc_dir);
+				*/
+				free_poll_hotkey_buffer(tmp);
+				tmp->poll_hotkey.poll_handle =
+					key->poll_hotkey.poll_handle;
+				tmp->poll_hotkey.poll_method =
+					key->poll_hotkey.poll_method;
+				tmp->poll_hotkey.action_handle =
+					key->poll_hotkey.action_handle;
+				tmp->poll_hotkey.action_method =
+					key->poll_hotkey.action_method;
+				tmp->poll_hotkey.poll_result =
+					key->poll_hotkey.poll_result;
+				/*
+				create_polling_proc(tmp);
+				*/
+				kfree(key);
+			}
+			return_VALUE(0);
 			break;
 		}
 	}
 
-	return_VOID;
+	return_VALUE(-ENODEV);
 }
 
 static void free_hotkey_device(union acpi_hotkey *key)
 {
 	struct acpi_device *dev;
-	int status;
 
 	ACPI_FUNCTION_TRACE("free_hotkey_device");
 
 	if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
-		status =
-		    acpi_bus_get_device(key->event_hotkey.bus_handle, &dev);
+		acpi_bus_get_device(key->event_hotkey.bus_handle, &dev);
 		if (dev->handle)
 			acpi_remove_notify_handler(dev->handle,
-						   ACPI_SYSTEM_NOTIFY,
+						   ACPI_DEVICE_NOTIFY,
 						   acpi_hotkey_notify_handler);
-	} else
-		remove_proc_entry(key->poll_hotkey.action_method,
-				  hotkey_proc_dir);
+		free_hotkey_buffer(key);
+	} else {
+		char  proc_name[80];
+
+		sprintf(proc_name, "%d", key->link.hotkey_standard_num);
+		/*
+		strcat(proc_name, key->poll_hotkey.poll_method);
+		*/
+		remove_proc_entry(proc_name,hotkey_proc_dir);
+		free_poll_hotkey_buffer(key);
+	}
 	kfree(key);
 	return_VOID;
 }
 
+static void
+free_hotkey_buffer(union acpi_hotkey *key)
+{
+	kfree(key->event_hotkey.action_method);
+}
+
+static void
+free_poll_hotkey_buffer(union acpi_hotkey *key)
+{
+	kfree(key->poll_hotkey.action_method);
+	kfree(key->poll_hotkey.poll_method);
+	kfree(key->poll_hotkey.poll_result);
+}
 static int
 init_hotkey_device(union acpi_hotkey *key, char *bus_str, char *action_str,
 		   char *method, int std_num, int external_num)
 {
+	acpi_handle	tmp_handle;
+	acpi_status status = AE_OK;
+
 	ACPI_FUNCTION_TRACE("init_hotkey_device");
 
+	if(std_num < 0 || IS_POLL(std_num) || !key )
+		goto do_fail;
+
+	if(!bus_str || !action_str || !method)
+		goto do_fail;
+
 	key->link.hotkey_type = ACPI_HOTKEY_EVENT;
 	key->link.hotkey_standard_num = std_num;
 	key->event_hotkey.flag = 0;
-	if (is_valid_acpi_path(bus_str))
-		acpi_get_handle((acpi_handle) 0,
-				bus_str, &(key->event_hotkey.bus_handle));
-	else
-		return_VALUE(-ENODEV);
-	key->event_hotkey.external_hotkey_num = external_num;
-	if (is_valid_acpi_path(action_str))
-		acpi_get_handle((acpi_handle) 0,
-				action_str, &(key->event_hotkey.action_handle));
-	key->event_hotkey.action_method = kmalloc(sizeof(method), GFP_KERNEL);
-	strcpy(key->event_hotkey.action_method, method);
+	key->event_hotkey.action_method = method;
 
-	return_VALUE(!is_valid_hotkey(key));
+	status = acpi_get_handle(NULL,bus_str, &(key->event_hotkey.bus_handle));
+	if(ACPI_FAILURE(status))
+		goto do_fail;
+	key->event_hotkey.external_hotkey_num = external_num;
+	status = acpi_get_handle(NULL,action_str, &(key->event_hotkey.action_handle));
+	if(ACPI_FAILURE(status))
+		goto do_fail;
+	status = acpi_get_handle(key->event_hotkey.action_handle,
+				method, &tmp_handle);
+	if (ACPI_FAILURE(status))
+		goto do_fail;
+	return_VALUE(AE_OK);
+do_fail:
+	return_VALUE(-ENODEV);
 }
 
 static int
@@ -495,34 +551,46 @@
 			char *poll_method,
 			char *action_str, char *action_method, int std_num)
 {
+	acpi_status status = AE_OK;
+	acpi_handle	tmp_handle;
+
 	ACPI_FUNCTION_TRACE("init_poll_hotkey_device");
 
+	if(std_num < 0 || IS_EVENT(std_num) || !key)
+		goto do_fail;
+
+	if(!poll_str || !poll_method || !action_str || !action_method)
+		goto do_fail;
+
 	key->link.hotkey_type = ACPI_HOTKEY_POLLING;
 	key->link.hotkey_standard_num = std_num;
 	key->poll_hotkey.flag = 0;
-	if (is_valid_acpi_path(poll_str))
-		acpi_get_handle((acpi_handle) 0,
-				poll_str, &(key->poll_hotkey.poll_handle));
-	else
-		return_VALUE(-ENODEV);
 	key->poll_hotkey.poll_method = poll_method;
-	if (is_valid_acpi_path(action_str))
-		acpi_get_handle((acpi_handle) 0,
-				action_str, &(key->poll_hotkey.action_handle));
-	key->poll_hotkey.action_method =
-	    kmalloc(sizeof(action_method), GFP_KERNEL);
-	strcpy(key->poll_hotkey.action_method, action_method);
+	key->poll_hotkey.action_method = action_method;
+
+	status = acpi_get_handle(NULL,poll_str, &(key->poll_hotkey.poll_handle));
+	if(ACPI_FAILURE(status))
+		goto do_fail;
+	status = acpi_get_handle(key->poll_hotkey.poll_handle,
+				poll_method, &tmp_handle);
+        if (ACPI_FAILURE(status))
+       		goto do_fail;
+	status = acpi_get_handle(NULL,action_str, &(key->poll_hotkey.action_handle));
+	if (ACPI_FAILURE(status))
+		goto do_fail;
+	status = acpi_get_handle(key->poll_hotkey.action_handle,
+				action_method, &tmp_handle);
+	if (ACPI_FAILURE(status))
+		goto do_fail;
 	key->poll_hotkey.poll_result =
 	    (union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
-	return_VALUE(is_valid_hotkey(key));
+	if(!key->poll_hotkey.poll_result)
+		goto do_fail;
+	return_VALUE(AE_OK);
+do_fail:
+	return_VALUE(-ENODEV);
 }
 
-static int check_hotkey_valid(union acpi_hotkey *key,
-			      struct acpi_hotkey_list *list)
-{
-	ACPI_FUNCTION_TRACE("check_hotkey_valid");
-	return_VALUE(0);
-}
 
 static int hotkey_open_config(struct inode *inode, struct file *file)
 {
@@ -531,10 +599,17 @@
 		     (file, hotkey_config_seq_show, PDE(inode)->data));
 }
 
+static int hotkey_poll_open_config(struct inode *inode, struct file *file)
+{
+	ACPI_FUNCTION_TRACE("hotkey_poll_open_config");
+	return_VALUE(single_open
+		     (file, hotkey_poll_config_seq_show, PDE(inode)->data));
+}
+
 static int hotkey_config_seq_show(struct seq_file *seq, void *offset)
 {
 	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
-	struct list_head *entries, *next;
+	struct list_head *entries;
 	char bus_name[ACPI_PATHNAME_MAX] = { 0 };
 	char action_name[ACPI_PATHNAME_MAX] = { 0 };
 	struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name };
@@ -542,10 +617,7 @@
 
 	ACPI_FUNCTION_TRACE(("hotkey_config_seq_show"));
 
-	if (!hotkey_list)
-		goto end;
-
-	list_for_each_safe(entries, next, hotkey_list->entries) {
+	list_for_each(entries, hotkey_list->entries) {
 		union acpi_hotkey *key =
 		    container_of(entries, union acpi_hotkey, entries);
 		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
@@ -553,18 +625,37 @@
 				      ACPI_NAME_TYPE_MAX, &bus);
 			acpi_get_name(key->event_hotkey.action_handle,
 				      ACPI_NAME_TYPE_MAX, &act);
-			seq_printf(seq, "%s:%s:%s:%d:%d", bus_name,
+			seq_printf(seq, "%s:%s:%s:%d:%d\n", bus_name,
 				   action_name,
 				   key->event_hotkey.action_method,
 				   key->link.hotkey_standard_num,
 				   key->event_hotkey.external_hotkey_num);
-		} /* ACPI_HOTKEY_POLLING */
-		else {
+		}
+	}
+	seq_puts(seq, "\n");
+	return_VALUE(0);
+}
+
+static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset)
+{
+	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
+	struct list_head *entries;
+	char bus_name[ACPI_PATHNAME_MAX] = { 0 };
+	char action_name[ACPI_PATHNAME_MAX] = { 0 };
+	struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name };
+	struct acpi_buffer act = { ACPI_PATHNAME_MAX, action_name };
+
+	ACPI_FUNCTION_TRACE(("hotkey_config_seq_show"));
+
+	list_for_each(entries, hotkey_list->entries) {
+		union acpi_hotkey *key =
+		    container_of(entries, union acpi_hotkey, entries);
+		if (key->link.hotkey_type == ACPI_HOTKEY_POLLING) {
 			acpi_get_name(key->poll_hotkey.poll_handle,
 				      ACPI_NAME_TYPE_MAX, &bus);
 			acpi_get_name(key->poll_hotkey.action_handle,
 				      ACPI_NAME_TYPE_MAX, &act);
-			seq_printf(seq, "%s:%s:%s:%s:%d", bus_name,
+			seq_printf(seq, "%s:%s:%s:%s:%d\n", bus_name,
 				   key->poll_hotkey.poll_method,
 				   action_name,
 				   key->poll_hotkey.action_method,
@@ -572,49 +663,83 @@
 		}
 	}
 	seq_puts(seq, "\n");
-      end:
 	return_VALUE(0);
 }
 
 static int
 get_parms(char *config_record,
 	  int *cmd,
-	  char *bus_handle,
-	  char *bus_method,
-	  char *action_handle,
-	  char *method, int *internal_event_num, int *external_event_num)
+	  char **bus_handle,
+	  char **bus_method,
+	  char **action_handle,
+	  char **method, int *internal_event_num, int *external_event_num)
 {
-	char *tmp, *tmp1;
+	char *tmp, *tmp1, count;
 	ACPI_FUNCTION_TRACE(("get_parms"));
 
 	sscanf(config_record, "%d", cmd);
 
+	if(*cmd == 1){
+		if(sscanf(config_record, "%d:%d", cmd, internal_event_num)!=2)
+			goto do_fail;
+		else
+			return (6);
+	}
 	tmp = strchr(config_record, ':');
+	if (!tmp)
+		goto do_fail;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(bus_handle, tmp, tmp1 - tmp);
-	bus_handle[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+
+	count = tmp1 - tmp;
+	*bus_handle = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!*bus_handle)
+		goto do_fail;
+	strncpy(*bus_handle, tmp, count);
+	*(*bus_handle + count) = 0;
 
 	tmp = tmp1;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(bus_method, tmp, tmp1 - tmp);
-	bus_method[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+	count = tmp1 - tmp;
+	*bus_method = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!*bus_method)
+		goto do_fail;
+	strncpy(*bus_method, tmp, count);
+	*(*bus_method + count) = 0;
 
 	tmp = tmp1;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(action_handle, tmp, tmp1 - tmp);
-	action_handle[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+	count = tmp1 - tmp;
+	*action_handle = (char *) kmalloc(count+1, GFP_KERNEL);
+	strncpy(*action_handle, tmp, count);
+	*(*action_handle + count) = 0;
 
 	tmp = tmp1;
 	tmp++;
 	tmp1 = strchr(tmp, ':');
-	strncpy(method, tmp, tmp1 - tmp);
-	method[tmp1 - tmp] = 0;
+	if (!tmp1)
+		goto do_fail;
+	count = tmp1 - tmp;
+	*method = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!*method)
+		goto do_fail;
+	strncpy(*method, tmp, count);
+	*(*method + count) = 0;
 
-	sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num);
+	if(sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num)<=0)
+		goto do_fail;
+
 	return_VALUE(6);
+do_fail:
+	return_VALUE(-1);
 }
 
 /*  count is length for one input record */
@@ -622,135 +747,117 @@
 				   const char __user * buffer,
 				   size_t count, loff_t * data)
 {
-	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
-	char config_record[MAX_CONFIG_RECORD_LEN];
-	char bus_handle[MAX_NAME_PATH_LEN];
-	char bus_method[MAX_NAME_PATH_LEN];
-	char action_handle[MAX_NAME_PATH_LEN];
-	char method[20];
+	char *config_record = NULL;
+	char *bus_handle = NULL;
+	char *bus_method = NULL;
+	char *action_handle = NULL;
+	char *method = NULL;
 	int cmd, internal_event_num, external_event_num;
 	int ret = 0;
 	union acpi_hotkey *key = NULL;
 
 	ACPI_FUNCTION_TRACE(("hotkey_write_config"));
 
-	if (!hotkey_list || count > MAX_CONFIG_RECORD_LEN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid arguments\n"));
-		return_VALUE(-EINVAL);
-	}
+	config_record = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!config_record)
+		return_VALUE(-ENOMEM);
 
 	if (copy_from_user(config_record, buffer, count)) {
+		kfree(config_record);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data \n"));
 		return_VALUE(-EINVAL);
 	}
-	config_record[count] = '\0';
+	config_record[count] = 0;
 
 	ret = get_parms(config_record,
 			&cmd,
-			bus_handle,
-			bus_method,
-			action_handle,
-			method, &internal_event_num, &external_event_num);
+			&bus_handle,
+			&bus_method,
+			&action_handle,
+			&method, &internal_event_num, &external_event_num);
+
+	kfree(config_record);
+	if(IS_OTHERS(internal_event_num))
+		goto do_fail;
 	if (ret != 6) {
+do_fail:	
+		kfree(bus_handle);
+		kfree(bus_method);
+		kfree(action_handle);
+		kfree(method);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Invalid data format ret=%d\n", ret));
 		return_VALUE(-EINVAL);
 	}
 
 	key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
-	ret = init_hotkey_device(key, bus_handle, action_handle, method,
+	if(!key)
+		goto do_fail;
+	memset(key, 0, sizeof(union acpi_hotkey));
+	if(cmd == 1) {
+		union acpi_hotkey *tmp = NULL;
+		tmp = get_hotkey_by_event(&global_hotkey_list,
+				internal_event_num);
+		if(!tmp)
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid key"));
+		else
+			memcpy(key, tmp, sizeof(union acpi_hotkey));
+		goto cont_cmd;
+	}
+	if (IS_EVENT(internal_event_num)) {
+		kfree(bus_method);
+		ret = init_hotkey_device(key, bus_handle, action_handle, method,
 				 internal_event_num, external_event_num);
-
-	if (ret || check_hotkey_valid(key, hotkey_list)) {
-		kfree(key);
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid hotkey \n"));
-		return_VALUE(-EINVAL);
-	}
-	switch (cmd) {
-	case 0:
-		hotkey_add(key);
-		break;
-	case 1:
-		hotkey_remove(key);
-		free_hotkey_device(key);
-		break;
-	case 2:
-		hotkey_update(key);
-		break;
-	default:
-		break;
-	}
-	return_VALUE(count);
-}
-
-/*  count is length for one input record */
-static ssize_t hotkey_write_poll_config(struct file *file,
-					const char __user * buffer,
-					size_t count, loff_t * data)
-{
-	struct seq_file *m = (struct seq_file *)file->private_data;
-	struct acpi_hotkey_list *hotkey_list =
-	    (struct acpi_hotkey_list *)m->private;
-
-	char config_record[MAX_CONFIG_RECORD_LEN];
-	char polling_handle[MAX_NAME_PATH_LEN];
-	char action_handle[MAX_NAME_PATH_LEN];
-	char poll_method[20], action_method[20];
-	int ret, internal_event_num, cmd, external_event_num;
-	union acpi_hotkey *key = NULL;
-
-	ACPI_FUNCTION_TRACE("hotkey_write_poll_config");
-
-	if (!hotkey_list || count > MAX_CONFIG_RECORD_LEN) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid arguments\n"));
-		return_VALUE(-EINVAL);
-	}
-
-	if (copy_from_user(config_record, buffer, count)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data \n"));
-		return_VALUE(-EINVAL);
-	}
-	config_record[count] = '\0';
-
-	ret = get_parms(config_record,
-			&cmd,
-			polling_handle,
-			poll_method,
-			action_handle,
-			action_method,
-			&internal_event_num, &external_event_num);
-
-	if (ret != 6) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid data format\n"));
-		return_VALUE(-EINVAL);
-	}
-
-	key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
-	ret = init_poll_hotkey_device(key, polling_handle, poll_method,
-				      action_handle, action_method,
+	} else
+		ret = init_poll_hotkey_device(key, bus_handle, bus_method,
+				      action_handle, method,
 				      internal_event_num);
-	if (ret || check_hotkey_valid(key, hotkey_list)) {
+	if (ret) {
+		kfree(bus_handle);
+		kfree(action_handle);
+		if(IS_EVENT(internal_event_num))
+			free_hotkey_buffer(key);
+		else
+			free_poll_hotkey_buffer(key);
 		kfree(key);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid hotkey \n"));
 		return_VALUE(-EINVAL);
 	}
+
+cont_cmd:
+	kfree(bus_handle);
+	kfree(action_handle);
+
 	switch (cmd) {
 	case 0:
-		hotkey_add(key);
+		if(get_hotkey_by_event(&global_hotkey_list,key->link.hotkey_standard_num))
+			goto fail_out;
+		else
+			hotkey_add(key);
 		break;
 	case 1:
 		hotkey_remove(key);
 		break;
 	case 2:
-		hotkey_update(key);
+		if(hotkey_update(key))
+			goto fail_out;
 		break;
 	default:
+		goto fail_out;
 		break;
 	}
 	return_VALUE(count);
+fail_out:
+	if(IS_EVENT(internal_event_num))
+		free_hotkey_buffer(key);
+	else
+		free_poll_hotkey_buffer(key);
+	kfree(key);
+	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "invalid key\n"));
+	return_VALUE(-EINVAL);
 }
 
-/*  
+/*
  * This function evaluates an ACPI method, given an int as parameter, the
  * method is searched within the scope of the handle, can be NULL. The output
  * of the method is written is output, which can also be NULL
@@ -775,7 +882,7 @@
 	return_VALUE(status == AE_OK);
 }
 
-static int read_acpi_int(acpi_handle handle, const char *method, int *val)
+static int read_acpi_int(acpi_handle handle, const char *method, union acpi_object *val)
 {
 	struct acpi_buffer output;
 	union acpi_object out_obj;
@@ -786,62 +893,32 @@
 	output.pointer = &out_obj;
 
 	status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
-	*val = out_obj.integer.value;
+	if(val){
+		val->integer.value = out_obj.integer.value;
+		val->type = out_obj.type;
+	} else
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "null val pointer"));
 	return_VALUE((status == AE_OK)
 		     && (out_obj.type == ACPI_TYPE_INTEGER));
 }
 
-static acpi_handle
-get_handle_from_hotkeylist(struct acpi_hotkey_list *hotkey_list, int event_num)
+static union acpi_hotkey *get_hotkey_by_event(struct
+			      acpi_hotkey_list
+			      *hotkey_list, int event)
 {
-	struct list_head *entries, *next;
+	struct list_head *entries;
 
-	list_for_each_safe(entries, next, hotkey_list->entries) {
+	list_for_each(entries, hotkey_list->entries) {
 		union acpi_hotkey *key =
 		    container_of(entries, union acpi_hotkey, entries);
-		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT
-		    && key->link.hotkey_standard_num == event_num) {
-			return (key->event_hotkey.action_handle);
+		if (key->link.hotkey_standard_num == event) {
+			return(key);
 		}
 	}
-	return (NULL);
+	return(NULL);
 }
 
-static
-char *get_method_from_hotkeylist(struct acpi_hotkey_list *hotkey_list,
-				 int event_num)
-{
-	struct list_head *entries, *next;
-
-	list_for_each_safe(entries, next, hotkey_list->entries) {
-		union acpi_hotkey *key =
-		    container_of(entries, union acpi_hotkey, entries);
-
-		if (key->link.hotkey_type == ACPI_HOTKEY_EVENT &&
-		    key->link.hotkey_standard_num == event_num)
-			return (key->event_hotkey.action_method);
-	}
-	return (NULL);
-}
-
-static struct acpi_polling_hotkey *get_hotkey_by_event(struct
-						       acpi_hotkey_list
-						       *hotkey_list, int event)
-{
-	struct list_head *entries, *next;
-
-	list_for_each_safe(entries, next, hotkey_list->entries) {
-		union acpi_hotkey *key =
-		    container_of(entries, union acpi_hotkey, entries);
-		if (key->link.hotkey_type == ACPI_HOTKEY_POLLING
-		    && key->link.hotkey_standard_num == event) {
-			return (&key->poll_hotkey);
-		}
-	}
-	return (NULL);
-}
-
-/*  
+/*
  * user call AML method interface:
  * Call convention:
  * echo "event_num: arg type : value"
@@ -854,48 +931,56 @@
 					 size_t count, loff_t * data)
 {
 	struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
-	char arg[MAX_CALL_PARM];
-	int event, type, value;
-
-	char *method;
-	acpi_handle handle;
+	char *arg;
+	int event,method_type,type, value;
+	union acpi_hotkey *key;
 
 	ACPI_FUNCTION_TRACE("hotkey_execte_aml_method");
 
-	if (!hotkey_list || count > MAX_CALL_PARM) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 1"));
-		return_VALUE(-EINVAL);
-	}
+	arg = (char *) kmalloc(count+1, GFP_KERNEL);
+	if(!arg)
+		return_VALUE(-ENOMEM);
+	arg[count]=0;
 
 	if (copy_from_user(arg, buffer, count)) {
+		kfree(arg);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 2"));
 		return_VALUE(-EINVAL);
 	}
 
-	arg[count] = '\0';
-
-	if (sscanf(arg, "%d:%d:%d", &event, &type, &value) != 3) {
+	if (sscanf(arg, "%d:%d:%d:%d", &event, &method_type, &type, &value) != 4) {
+		kfree(arg);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid argument 3"));
 		return_VALUE(-EINVAL);
 	}
-
+	kfree(arg);
 	if (type == ACPI_TYPE_INTEGER) {
-		handle = get_handle_from_hotkeylist(hotkey_list, event);
-		method = (char *)get_method_from_hotkeylist(hotkey_list, event);
+		key = get_hotkey_by_event(hotkey_list, event);
+		if(!key)
+			goto do_fail;
 		if (IS_EVENT(event))
-			write_acpi_int(handle, method, value, NULL);
+			write_acpi_int(key->event_hotkey.action_handle,
+					key->event_hotkey.action_method, value, NULL);
 		else if (IS_POLL(event)) {
-			struct acpi_polling_hotkey *key;
-			key = (struct acpi_polling_hotkey *)
-			    get_hotkey_by_event(hotkey_list, event);
-			read_acpi_int(handle, method, key->poll_result);
+			if ( method_type == POLL_METHOD )
+				read_acpi_int(key->poll_hotkey.poll_handle,
+					key->poll_hotkey.poll_method,
+					key->poll_hotkey.poll_result);
+			else if ( method_type == ACTION_METHOD )
+				write_acpi_int(key->poll_hotkey.action_handle,
+					key->poll_hotkey.action_method, value, NULL);
+			else
+				goto do_fail;
+
 		}
 	} else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Not supported"));
 		return_VALUE(-EINVAL);
 	}
-
 	return_VALUE(count);
+do_fail:
+	return_VALUE(-EINVAL);
+
 }
 
 static int __init hotkey_init(void)
@@ -928,7 +1013,7 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_EV_CONFIG));
-		return (-ENODEV);
+		goto do_fail1;
 	} else {
 		hotkey_config->proc_fops = &hotkey_config_fops;
 		hotkey_config->data = &global_hotkey_list;
@@ -943,7 +1028,8 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_EV_CONFIG));
-		return (-ENODEV);
+
+		goto do_fail2;
 	} else {
 		hotkey_poll_config->proc_fops = &hotkey_poll_config_fops;
 		hotkey_poll_config->data = &global_hotkey_list;
@@ -957,7 +1043,7 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_ACTION));
-		return (-ENODEV);
+		goto do_fail3;
 	} else {
 		hotkey_action->proc_fops = &hotkey_action_fops;
 		hotkey_action->owner = THIS_MODULE;
@@ -970,7 +1056,7 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Hotkey: Unable to create %s entry\n",
 				  HOTKEY_INFO));
-		return (-ENODEV);
+		goto do_fail4;
 	} else {
 		hotkey_info->proc_fops = &hotkey_info_fops;
 		hotkey_info->owner = THIS_MODULE;
@@ -979,23 +1065,33 @@
 	}
 
 	result = acpi_bus_register_driver(&hotkey_driver);
-	if (result < 0) {
-		remove_proc_entry(HOTKEY_PROC, acpi_root_dir);
-		return (-ENODEV);
-	}
+	if (result < 0)
+		goto do_fail5;
 	global_hotkey_list.count = 0;
 	global_hotkey_list.entries = &hotkey_entries;
 
 	INIT_LIST_HEAD(&hotkey_entries);
 
 	return (0);
+
+do_fail5:
+	remove_proc_entry(HOTKEY_INFO, hotkey_proc_dir);
+do_fail4:
+	remove_proc_entry(HOTKEY_ACTION, hotkey_proc_dir);
+do_fail3:
+	remove_proc_entry(HOTKEY_PL_CONFIG, hotkey_proc_dir);
+do_fail2:
+	remove_proc_entry(HOTKEY_EV_CONFIG, hotkey_proc_dir);
+do_fail1:
+	remove_proc_entry(HOTKEY_PROC, acpi_root_dir);
+	return (-ENODEV);
 }
 
 static void __exit hotkey_exit(void)
 {
 	struct list_head *entries, *next;
 
-	ACPI_FUNCTION_TRACE("hotkey_remove");
+	ACPI_FUNCTION_TRACE("hotkey_exit");
 
 	list_for_each_safe(entries, next, global_hotkey_list.entries) {
 		union acpi_hotkey *key =
diff --git a/drivers/acpi/motherboard.c b/drivers/acpi/motherboard.c
index 61ea707..2934475 100644
--- a/drivers/acpi/motherboard.c
+++ b/drivers/acpi/motherboard.c
@@ -43,7 +43,7 @@
  */
 #define IS_RESERVED_ADDR(base, len) \
 	(((len) > 0) && ((base) > 0) && ((base) + (len) < IO_SPACE_LIMIT) \
-	&& ((base) + (len) > PCIBIOS_MIN_IO))
+	&& ((base) + (len) > 0x1000))
 
 /*
  * Clearing the flag (IORESOURCE_BUSY) allows drivers to use
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index bdd9f37..7289da3 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -145,10 +145,14 @@
 #endif
 }
 
+extern int acpi_in_resume;
 void *
 acpi_os_allocate(acpi_size size)
 {
-	return kmalloc(size, GFP_KERNEL);
+	if (acpi_in_resume)
+		return kmalloc(size, GFP_ATOMIC);
+	else
+		return kmalloc(size, GFP_KERNEL);
 }
 
 void
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index d1f42b9..bb973d2 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -269,7 +269,51 @@
 /* --------------------------------------------------------------------------
                           PCI Interrupt Routing Support
    -------------------------------------------------------------------------- */
+typedef int (*irq_lookup_func)(struct acpi_prt_entry *, int *, int *, char **);
 
+static int
+acpi_pci_allocate_irq(struct acpi_prt_entry *entry,
+	int	*edge_level,
+	int	*active_high_low,
+	char	**link)
+{
+	int	irq;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_allocate_irq");
+
+	if (entry->link.handle) {
+		irq = acpi_pci_link_allocate_irq(entry->link.handle,
+			entry->link.index, edge_level, active_high_low, link);
+		if (irq < 0) {
+			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
+			return_VALUE(-1);
+		}
+	} else {
+		irq = entry->link.index;
+		*edge_level = ACPI_LEVEL_SENSITIVE;
+		*active_high_low = ACPI_ACTIVE_LOW;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
+	return_VALUE(irq);
+}
+
+static int
+acpi_pci_free_irq(struct acpi_prt_entry *entry,
+	int	*edge_level,
+	int	*active_high_low,
+	char	**link)
+{
+	int	irq;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_free_irq");
+	if (entry->link.handle) {
+		irq = acpi_pci_link_free_irq(entry->link.handle);
+	} else {
+		irq = entry->link.index;
+	}
+	return_VALUE(irq);
+}
 /*
  * acpi_pci_irq_lookup
  * success: return IRQ >= 0
@@ -282,12 +326,13 @@
 	int			pin,
 	int			*edge_level,
 	int			*active_high_low,
-	char			**link)
+	char			**link,
+	irq_lookup_func		func)
 {
 	struct acpi_prt_entry	*entry = NULL;
 	int segment = pci_domain_nr(bus);
 	int bus_nr = bus->number;
-	int irq;
+	int ret;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_irq_lookup");
 
@@ -301,22 +346,8 @@
 		return_VALUE(-1);
 	}
 	
-	if (entry->link.handle) {
-		irq = acpi_pci_link_get_irq(entry->link.handle,
-			entry->link.index, edge_level, active_high_low, link);
-		if (irq < 0) {
-			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ link routing entry\n"));
-			return_VALUE(-1);
-		}
-	} else {
-		irq = entry->link.index;
-		*edge_level = ACPI_LEVEL_SENSITIVE;
-		*active_high_low = ACPI_ACTIVE_LOW;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found IRQ %d\n", irq));
-
-	return_VALUE(irq);
+	ret = func(entry, edge_level, active_high_low, link);
+	return_VALUE(ret);
 }
 
 /*
@@ -330,7 +361,8 @@
 	int			pin,
 	int			*edge_level,
 	int			*active_high_low,
-	char			**link)
+	char			**link,
+	irq_lookup_func		func)
 {
 	struct pci_dev		*bridge = dev;
 	int			irq = -1;
@@ -363,7 +395,7 @@
 		}
 
 		irq = acpi_pci_irq_lookup(bridge->bus, PCI_SLOT(bridge->devfn),
-			pin, edge_level, active_high_low, link);
+			pin, edge_level, active_high_low, link, func);
 	}
 
 	if (irq < 0) {
@@ -415,7 +447,7 @@
 	 * values override any BIOS-assigned IRQs set during boot.
 	 */
  	irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
-		&edge_level, &active_high_low, &link);
+		&edge_level, &active_high_low, &link, acpi_pci_allocate_irq);
 
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
@@ -423,7 +455,7 @@
 	 */
 	if (irq < 0)
  		irq = acpi_pci_irq_derive(dev, pin, &edge_level,
-			&active_high_low, &link);
+			&active_high_low, &link, acpi_pci_allocate_irq);
  
 	/*
 	 * No IRQ known to the ACPI subsystem - maybe the BIOS / 
@@ -462,7 +494,9 @@
 EXPORT_SYMBOL(acpi_pci_irq_enable);
 
 
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+/* FIXME: implement x86/x86_64 version */
+void __attribute__((weak)) acpi_unregister_gsi(u32 i) {}
+
 void
 acpi_pci_irq_disable (
 	struct pci_dev		*dev)
@@ -489,14 +523,14 @@
 	 * First we check the PCI IRQ routing table (PRT) for an IRQ.
 	 */
  	gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
-				  &edge_level, &active_high_low, NULL);
+			&edge_level, &active_high_low, NULL, acpi_pci_free_irq);
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the
 	 * device's parent bridge.
 	 */
 	if (gsi < 0)
  		gsi = acpi_pci_irq_derive(dev, pin,
-					  &edge_level, &active_high_low, NULL);
+			&edge_level, &active_high_low, NULL, acpi_pci_free_irq);
 	if (gsi < 0)
 		return_VOID;
 
@@ -512,4 +546,3 @@
 
 	return_VOID;
 }
-#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 6ad0e77..834c2ce 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -68,6 +68,10 @@
 			},
 };
 
+/*
+ * If a link is initialized, we never change its active and initialized
+ * later even the link is disable. Instead, we just repick the active irq
+ */
 struct acpi_pci_link_irq {
 	u8			active;			/* Current IRQ */
 	u8			edge_level;		/* All IRQs */
@@ -76,8 +80,7 @@
 	u8			possible_count;
 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
 	u8			initialized:1;
-	u8			suspend_resume:1;
-	u8			reserved:6;
+	u8			reserved:7;
 };
 
 struct acpi_pci_link {
@@ -85,12 +88,14 @@
 	struct acpi_device	*device;
 	acpi_handle		handle;
 	struct acpi_pci_link_irq irq;
+	int			refcnt;
 };
 
 static struct {
 	int			count;
 	struct list_head	entries;
 }				acpi_link;
+DECLARE_MUTEX(acpi_link_lock);
 
 
 /* --------------------------------------------------------------------------
@@ -532,12 +537,12 @@
 
 	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
 
-	if (link->irq.suspend_resume) {
-		acpi_pci_link_set(link, link->irq.active);
-		link->irq.suspend_resume = 0;
-	}
-	if (link->irq.initialized)
+	if (link->irq.initialized) {
+		if (link->refcnt == 0)
+			/* This means the link is disabled but initialized */
+			acpi_pci_link_set(link, link->irq.active);
 		return_VALUE(0);
+	}
 
 	/*
 	 * search for active IRQ in list of possible IRQs.
@@ -596,13 +601,13 @@
 }
 
 /*
- * acpi_pci_link_get_irq
+ * acpi_pci_link_allocate_irq
  * success: return IRQ >= 0
  * failure: return -1
  */
 
 int
-acpi_pci_link_get_irq (
+acpi_pci_link_allocate_irq (
 	acpi_handle		handle,
 	int			index,
 	int			*edge_level,
@@ -613,7 +618,7 @@
 	struct acpi_device	*device = NULL;
 	struct acpi_pci_link	*link = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_pci_link_get_irq");
+	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate_irq");
 
 	result = acpi_bus_get_device(handle, &device);
 	if (result) {
@@ -633,21 +638,81 @@
 		return_VALUE(-1);
 	}
 
-	if (acpi_pci_link_allocate(link))
+	down(&acpi_link_lock);
+	if (acpi_pci_link_allocate(link)) {
+		up(&acpi_link_lock);
 		return_VALUE(-1);
+	}
 	   
 	if (!link->irq.active) {
+		up(&acpi_link_lock);
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n"));
 		return_VALUE(-1);
 	}
+	link->refcnt ++;
+	up(&acpi_link_lock);
 
 	if (edge_level) *edge_level = link->irq.edge_level;
 	if (active_high_low) *active_high_low = link->irq.active_high_low;
 	if (name) *name = acpi_device_bid(link->device);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Link %s is referenced\n", acpi_device_bid(link->device)));
 	return_VALUE(link->irq.active);
 }
 
+/*
+ * We don't change link's irq information here.  After it is reenabled, we
+ * continue use the info
+ */
+int
+acpi_pci_link_free_irq(acpi_handle handle)
+{
+	struct acpi_device	*device = NULL;
+	struct acpi_pci_link	*link = NULL;
+	acpi_status		result;
 
+	ACPI_FUNCTION_TRACE("acpi_pci_link_free_irq");
+
+	result = acpi_bus_get_device(handle, &device);
+	if (result) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n"));
+		return_VALUE(-1);
+	}
+
+	link = (struct acpi_pci_link *) acpi_driver_data(device);
+	if (!link) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+		return_VALUE(-1);
+	}
+
+	down(&acpi_link_lock);
+	if (!link->irq.initialized) {
+		up(&acpi_link_lock);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link isn't initialized\n"));
+		return_VALUE(-1);
+	}
+
+#ifdef	FUTURE_USE
+	/*
+	 * The Link reference count allows us to _DISable an unused link
+	 * and suspend time, and set it again  on resume.
+	 * However, 2.6.12 still has irq_router.resume
+	 * which blindly restores the link state.
+	 * So we disable the reference count method
+	 * to prevent duplicate acpi_pci_link_set()
+	 * which would harm some systems
+	 */
+	link->refcnt --;
+#endif
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+		"Link %s is dereferenced\n", acpi_device_bid(link->device)));
+
+	if (link->refcnt == 0) {
+		acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL);
+	}
+	up(&acpi_link_lock);
+	return_VALUE(link->irq.active);
+}
 /* --------------------------------------------------------------------------
                                  Driver Interface
    -------------------------------------------------------------------------- */
@@ -677,6 +742,7 @@
 	strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS);
 	acpi_driver_data(device) = link;
 
+	down(&acpi_link_lock);
 	result = acpi_pci_link_get_possible(link);
 	if (result)
 		goto end;
@@ -712,6 +778,7 @@
 end:
 	/* disable all links -- to be activated on use */
 	acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL);
+	up(&acpi_link_lock);
 
 	if (result)
 		kfree(link);
@@ -720,24 +787,42 @@
 }
 
 static int
-irqrouter_suspend(
-	struct sys_device *dev,
-	u32	state)
+acpi_pci_link_resume(
+	struct acpi_pci_link *link)
+{
+	ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
+
+	if (link->refcnt && link->irq.active && link->irq.initialized)
+		return_VALUE(acpi_pci_link_set(link, link->irq.active));
+	else
+		return_VALUE(0);
+}
+
+/*
+ * FIXME: this is a workaround to avoid nasty warning.  It will be removed
+ * after every device calls pci_disable_device in .resume.
+ */
+int acpi_in_resume;
+static int
+irqrouter_resume(
+	struct sys_device *dev)
 {
 	struct list_head        *node = NULL;
 	struct acpi_pci_link    *link = NULL;
 
-	ACPI_FUNCTION_TRACE("irqrouter_suspend");
+	ACPI_FUNCTION_TRACE("irqrouter_resume");
 
+	acpi_in_resume = 1;
 	list_for_each(node, &acpi_link.entries) {
 		link = list_entry(node, struct acpi_pci_link, node);
 		if (!link) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				"Invalid link context\n"));
 			continue;
 		}
-		if (link->irq.active && link->irq.initialized)
-			link->irq.suspend_resume = 1;
+		acpi_pci_link_resume(link);
 	}
+	acpi_in_resume = 0;
 	return_VALUE(0);
 }
 
@@ -756,8 +841,9 @@
 
 	link = (struct acpi_pci_link *) acpi_driver_data(device);
 
-	/* TBD: Acquire/release lock */
+	down(&acpi_link_lock);
 	list_del(&link->node);
+	up(&acpi_link_lock);
 
 	kfree(link);
 
@@ -849,9 +935,10 @@
 __setup("acpi_irq_balance", acpi_irq_balance_set);
 
 
+/* FIXME: we will remove this interface after all drivers call pci_disable_device */
 static struct sysdev_class irqrouter_sysdev_class = {
         set_kset_name("irqrouter"),
-        .suspend = irqrouter_suspend,
+        .resume = irqrouter_resume,
 };
 
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 893b074..2c04740 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -81,30 +81,32 @@
  *
  * To skip this limit, boot/load with a large max_cstate limit.
  */
-static int no_c2c3(struct dmi_system_id *id)
+static int set_max_cstate(struct dmi_system_id *id)
 {
 	if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
 		return 0;
 
-	printk(KERN_NOTICE PREFIX "%s detected - C2,C3 disabled."
+	printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate."
 		" Override with \"processor.max_cstate=%d\"\n", id->ident,
-	       ACPI_PROCESSOR_MAX_POWER + 1);
+		(long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
 
-	max_cstate = 1;
+	max_cstate = (long)id->driver_data;
 
 	return 0;
 }
 
 
-
-
 static struct dmi_system_id __initdata processor_power_dmi_table[] = {
-	{ no_c2c3, "IBM ThinkPad R40e", {
+	{ set_max_cstate, "IBM ThinkPad R40e", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
-	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }},
-	{ no_c2c3, "Medion 41700", {
+	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW") }, (void*)1},
+	{ set_max_cstate, "Medion 41700", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
-	  DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J") }},
+	  DMI_MATCH(DMI_BIOS_VERSION,"R01-A1J") }, (void*)1},
+	{ set_max_cstate, "Clevo 5600D", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+	  DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307") },
+	  (void*)2},
 	{},
 };
 
@@ -549,7 +551,8 @@
 	ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
 
 	for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
-		memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+		memset(&(pr->power.states[i]), 0, 
+		       sizeof(struct acpi_processor_cx));
 
 	/* if info is obtained from pblk/fadt, type equals state */
 	pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@@ -580,7 +583,8 @@
 
 	pr->power.count = 0;
 	for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
-		memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+		memset(&(pr->power.states[i]), 0, 
+		       sizeof(struct acpi_processor_cx));
 
 	status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
 	if (ACPI_FAILURE(status)) {
@@ -763,7 +767,6 @@
 	}
 
 	if (pr->flags.bm_check) {
-		printk("Disabling BM access before entering C3\n");
 		/* bus mastering control is necessary */
 		if (!pr->flags.bm_control) {
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -771,7 +774,6 @@
 			return_VOID;
 		}
 	} else {
-		printk("Invalidating cache before entering C3\n");
 		/*
 		 * WBINVD should be set in fadt, for C3 state to be
 		 * supported on when bm_check is not required.
@@ -842,7 +844,7 @@
 	result = acpi_processor_get_power_info_cst(pr);
 	if ((result) || (acpi_processor_power_verify(pr) < 2)) {
 		result = acpi_processor_get_power_info_fadt(pr);
-		if (result)
+		if ((result) || (acpi_processor_power_verify(pr) < 2))
 			result = acpi_processor_get_power_info_default_c1(pr);
 	}
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 3e9fb6e..418b146 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1135,7 +1135,7 @@
 		/* this is for the online array utilities */
 		if (!drv->heads && i)
 			continue;
-		blk_queue_hardsect_size(host->queue, drv->block_size);
+		blk_queue_hardsect_size(drv->queue, drv->block_size);
 		set_capacity(disk, drv->nr_blocks);
 		add_disk(disk);
 	}
@@ -1691,7 +1691,7 @@
 	cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size, &block_size);
 	cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, inq_buff, drv);
 
-	blk_queue_hardsect_size(h->queue, drv->block_size);
+	blk_queue_hardsect_size(drv->queue, drv->block_size);
 	set_capacity(disk, drv->nr_blocks);
 
 	kfree(size_buff);
@@ -2248,12 +2248,12 @@
  	 * them up.  We will also keep track of the next queue to run so
  	 * that every queue gets a chance to be started first.
  	*/
- 	for (j=0; j < NWD; j++){
- 		int curr_queue = (start_queue + j) % NWD;
+	for (j=0; j < h->highest_lun + 1; j++){
+		int curr_queue = (start_queue + j) % (h->highest_lun + 1);
  		/* make sure the disk has been added and the drive is real
  		 * because this can be called from the middle of init_one.
  		*/
- 		if(!(h->gendisk[curr_queue]->queue) ||
+		if(!(h->drv[curr_queue].queue) ||
 		 		   !(h->drv[curr_queue].heads))
  			continue;
  		blk_start_queue(h->gendisk[curr_queue]->queue);
@@ -2264,14 +2264,14 @@
  		if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
  		{
  			if (curr_queue == start_queue){
- 				h->next_to_run = (start_queue + 1) % NWD;
+				h->next_to_run = (start_queue + 1) % (h->highest_lun + 1);
  				goto cleanup;
  			} else {
  				h->next_to_run = curr_queue;
  				goto cleanup;
  	}
  		} else {
- 			curr_queue = (curr_queue + 1) % NWD;
+			curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
  		}
  	}
 
@@ -2279,7 +2279,6 @@
 	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 	return IRQ_HANDLED;
 }
-
 /* 
  *  We cannot read the structure directly, for portablity we must use 
  *   the io functions.
@@ -2789,13 +2788,6 @@
 	}
 
 	spin_lock_init(&hba[i]->lock);
-	q = blk_init_queue(do_cciss_request, &hba[i]->lock);
-	if (!q)
-		goto clean4;
-
-	q->backing_dev_info.ra_pages = READ_AHEAD;
-	hba[i]->queue = q;
-	q->queuedata = hba[i];
 
 	/* Initialize the pdev driver private data. 
 		have it point to hba[i].  */
@@ -2817,6 +2809,20 @@
 
 	cciss_procinit(i);
 
+	for(j=0; j < NWD; j++) { /* mfm */
+		drive_info_struct *drv = &(hba[i]->drv[j]);
+		struct gendisk *disk = hba[i]->gendisk[j];
+
+		q = blk_init_queue(do_cciss_request, &hba[i]->lock);
+		if (!q) {
+			printk(KERN_ERR
+			   "cciss:  unable to allocate queue for disk %d\n",
+			   j);
+			break;
+		}
+		drv->queue = q;
+
+		q->backing_dev_info.ra_pages = READ_AHEAD;
 	blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
 
 	/* This is a hardware imposed limit. */
@@ -2827,26 +2833,23 @@
 
 	blk_queue_max_sectors(q, 512);
 
-
-	for(j=0; j<NWD; j++) {
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		struct gendisk *disk = hba[i]->gendisk[j];
-
+		q->queuedata = hba[i];
 		sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
 		sprintf(disk->devfs_name, "cciss/host%d/target%d", i, j);
 		disk->major = hba[i]->major;
 		disk->first_minor = j << NWD_SHIFT;
 		disk->fops = &cciss_fops;
-		disk->queue = hba[i]->queue;
+		disk->queue = q;
 		disk->private_data = drv;
 		/* we must register the controller even if no disks exist */
 		/* this is for the online array utilities */
 		if(!drv->heads && j)
 			continue;
-		blk_queue_hardsect_size(hba[i]->queue, drv->block_size);
+		blk_queue_hardsect_size(q, drv->block_size);
 		set_capacity(disk, drv->nr_blocks);
 		add_disk(disk);
 	}
+
 	return(1);
 
 clean4:
@@ -2912,10 +2915,10 @@
 	for (j = 0; j < NWD; j++) {
 		struct gendisk *disk = hba[i]->gendisk[j];
 		if (disk->flags & GENHD_FL_UP)
+			blk_cleanup_queue(disk->queue);
 			del_gendisk(disk);
 	}
 
-	blk_cleanup_queue(hba[i]->queue);
 	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
 			    hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
 	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 8fb1920..566587d 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -29,6 +29,7 @@
 {
  	__u32   LunID;	
 	int 	usage_count;
+	struct request_queue *queue;
 	sector_t nr_blocks;
 	int	block_size;
 	int 	heads;
@@ -72,7 +73,6 @@
 	unsigned int maxQsinceinit;
 	unsigned int maxSG;
 	spinlock_t lock;
-	struct request_queue *queue;
 
 	//* pointers to command and error info pool */ 
 	CommandList_struct 	*cmd_pool;
@@ -260,7 +260,7 @@
 	struct access_method *access;
 };
 
-#define CCISS_LOCK(i)	(hba[i]->queue->queue_lock)
+#define CCISS_LOCK(i)	(&hba[i]->lock)
 
 #endif /* CCISS_H */
 
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index de5746e..2435a7c 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -1281,6 +1281,7 @@
 			 */
 			if (!cfq_crq_in_driver(crq) &&
 			    !cfq_cfqq_idle_window(cfqq) &&
+			    !blk_barrier_rq(rq) &&
 			    cfqd->rq_in_driver >= cfqd->cfq_max_depth)
 				return NULL;
 
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index c1fe013..b4af87c 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -143,6 +143,7 @@
 	char major_version;
 	char minor_version;
 	struct list_head list;
+	u32 apbase_config;
 };
 
 #define KB(x)	((x) * 1024)
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 51266d6..1f7d415 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -1047,9 +1047,15 @@
 	/* aperture size */
 	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);
 
-	/* address to map to */
-	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
-	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+	if (agp_bridge->apbase_config != 0) {
+		pci_write_config_dword(agp_bridge->dev, AGP_APBASE,
+				       agp_bridge->apbase_config);
+	} else {
+		/* address to map to */
+		pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
+		agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+		agp_bridge->apbase_config = temp;
+	}
 
 	/* attbase - aperture base */
 	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 7b19e02..523fd3c 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -198,10 +198,10 @@
 
 	if (scancode >= dev->keycodemax)
 		return -EINVAL;
-	if (keycode > KEY_MAX)
-		return -EINVAL;
 	if (keycode < 0 || keycode > KEY_MAX)
 		return -EINVAL;
+	if (keycode >> (dev->keycodesize * 8))
+		return -EINVAL;
 
 	oldkey = SET_INPUT_KEYCODE(dev, scancode, keycode);
 
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index fd04206..cefbe98 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -439,6 +439,11 @@
 	{ 0, 0 },
 };
 
+struct sonypi_keypress {
+	struct input_dev *dev;
+	int key;
+};
+
 static struct sonypi_device {
 	struct pci_dev *dev;
 	struct platform_device *pdev;
@@ -710,22 +715,61 @@
 
 static void input_keyrelease(void *data)
 {
-	struct input_dev *input_dev;
-	int key;
+	struct sonypi_keypress kp;
 
-	while (1) {
-		if (kfifo_get(sonypi_device.input_fifo,
-			      (unsigned char *)&input_dev,
-			      sizeof(input_dev)) != sizeof(input_dev))
-			return;
-		if (kfifo_get(sonypi_device.input_fifo,
-			      (unsigned char *)&key,
-			      sizeof(key)) != sizeof(key))
-			return;
-
+	while (kfifo_get(sonypi_device.input_fifo, (unsigned char *)&kp,
+			 sizeof(kp)) == sizeof(kp)) {
 		msleep(10);
-		input_report_key(input_dev, key, 0);
-		input_sync(input_dev);
+		input_report_key(kp.dev, kp.key, 0);
+		input_sync(kp.dev);
+	}
+}
+
+static void sonypi_report_input_event(u8 event)
+{
+	struct input_dev *jog_dev = &sonypi_device.input_jog_dev;
+	struct input_dev *key_dev = &sonypi_device.input_key_dev;
+	struct sonypi_keypress kp = { NULL };
+	int i;
+
+	switch (event) {
+	case SONYPI_EVENT_JOGDIAL_UP:
+	case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
+		input_report_rel(jog_dev, REL_WHEEL, 1);
+		input_sync(jog_dev);
+		break;
+
+	case SONYPI_EVENT_JOGDIAL_DOWN:
+	case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
+		input_report_rel(jog_dev, REL_WHEEL, -1);
+		input_sync(jog_dev);
+		break;
+
+	case SONYPI_EVENT_JOGDIAL_PRESSED:
+		kp.key = BTN_MIDDLE;
+		kp.dev = jog_dev;
+		break;
+
+	case SONYPI_EVENT_FNKEY_RELEASED:
+		/* Nothing, not all VAIOs generate this event */
+		break;
+
+	default:
+		for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
+			if (event == sonypi_inputkeys[i].sonypiev) {
+				kp.dev = key_dev;
+				kp.key = sonypi_inputkeys[i].inputev;
+				break;
+			}
+		break;
+	}
+
+	if (kp.dev) {
+		input_report_key(kp.dev, kp.key, 1);
+		input_sync(kp.dev);
+		kfifo_put(sonypi_device.input_fifo,
+			  (unsigned char *)&kp, sizeof(kp));
+		schedule_work(&sonypi_device.input_work);
 	}
 }
 
@@ -768,51 +812,8 @@
 		printk(KERN_INFO
 		       "sonypi: event port1=0x%02x,port2=0x%02x\n", v1, v2);
 
-	if (useinput) {
-		struct input_dev *input_jog_dev = &sonypi_device.input_jog_dev;
-		struct input_dev *input_key_dev = &sonypi_device.input_key_dev;
-		switch (event) {
-		case SONYPI_EVENT_JOGDIAL_UP:
-		case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
-			input_report_rel(input_jog_dev, REL_WHEEL, 1);
-			break;
-		case SONYPI_EVENT_JOGDIAL_DOWN:
-		case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
-			input_report_rel(input_jog_dev, REL_WHEEL, -1);
-			break;
-		case SONYPI_EVENT_JOGDIAL_PRESSED: {
-			int key = BTN_MIDDLE;
-			input_report_key(input_jog_dev, key, 1);
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&input_jog_dev,
-				  sizeof(input_jog_dev));
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&key, sizeof(key));
-			break;
-		}
-		case SONYPI_EVENT_FNKEY_RELEASED:
-			/* Nothing, not all VAIOs generate this event */
-			break;
-		}
-		input_sync(input_jog_dev);
-
-		for (i = 0; sonypi_inputkeys[i].sonypiev; i++) {
-			int key;
-
-			if (event != sonypi_inputkeys[i].sonypiev)
-				continue;
-
-			key = sonypi_inputkeys[i].inputev;
-			input_report_key(input_key_dev, key, 1);
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&input_key_dev,
-				  sizeof(input_key_dev));
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&key, sizeof(key));
-		}
-		input_sync(input_key_dev);
-		schedule_work(&sonypi_device.input_work);
-	}
+	if (useinput)
+		sonypi_report_input_event(event);
 
 	kfifo_put(sonypi_device.fifo, (unsigned char *)&event, sizeof(event));
 	kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN);
@@ -1227,14 +1228,7 @@
 		sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] =
 			BIT(BTN_MIDDLE);
 		sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL);
-		sonypi_device.input_jog_dev.name =
-			kmalloc(sizeof(SONYPI_JOG_INPUTNAME), GFP_KERNEL);
-		if (!sonypi_device.input_jog_dev.name) {
-			printk(KERN_ERR "sonypi: kmalloc failed\n");
-			ret = -ENOMEM;
-			goto out_inkmallocinput1;
-		}
-		sprintf(sonypi_device.input_jog_dev.name, SONYPI_JOG_INPUTNAME);
+		sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME;
 		sonypi_device.input_jog_dev.id.bustype = BUS_ISA;
 		sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY;
 
@@ -1248,14 +1242,7 @@
 			if (sonypi_inputkeys[i].inputev)
 				set_bit(sonypi_inputkeys[i].inputev,
 					sonypi_device.input_key_dev.keybit);
-		sonypi_device.input_key_dev.name =
-			kmalloc(sizeof(SONYPI_KEY_INPUTNAME), GFP_KERNEL);
-		if (!sonypi_device.input_key_dev.name) {
-			printk(KERN_ERR "sonypi: kmalloc failed\n");
-			ret = -ENOMEM;
-			goto out_inkmallocinput2;
-		}
-		sprintf(sonypi_device.input_key_dev.name, SONYPI_KEY_INPUTNAME);
+		sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME;
 		sonypi_device.input_key_dev.id.bustype = BUS_ISA;
 		sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY;
 
@@ -1313,11 +1300,7 @@
 	kfifo_free(sonypi_device.input_fifo);
 out_infifo:
 	input_unregister_device(&sonypi_device.input_key_dev);
-	kfree(sonypi_device.input_key_dev.name);
-out_inkmallocinput2:
 	input_unregister_device(&sonypi_device.input_jog_dev);
-	kfree(sonypi_device.input_jog_dev.name);
-out_inkmallocinput1:
 	free_irq(sonypi_device.irq, sonypi_irq);
 out_reqirq:
 	release_region(sonypi_device.ioport1, sonypi_device.region_size);
@@ -1337,13 +1320,14 @@
 {
 	sonypi_disable();
 
+	synchronize_sched();  /* Allow sonypi interrupt to complete. */
+	flush_scheduled_work();
+
 	platform_device_unregister(sonypi_device.pdev);
 
 	if (useinput) {
 		input_unregister_device(&sonypi_device.input_key_dev);
-		kfree(sonypi_device.input_key_dev.name);
 		input_unregister_device(&sonypi_device.input_jog_dev);
-		kfree(sonypi_device.input_jog_dev.name);
 		kfifo_free(sonypi_device.input_fifo);
 	}
 
diff --git a/drivers/char/watchdog/sa1100_wdt.c b/drivers/char/watchdog/sa1100_wdt.c
index 1b21326..fb88b40 100644
--- a/drivers/char/watchdog/sa1100_wdt.c
+++ b/drivers/char/watchdog/sa1100_wdt.c
@@ -36,13 +36,10 @@
 #include <asm/uaccess.h>
 
 #define OSCR_FREQ		CLOCK_TICK_RATE
-#define SA1100_CLOSE_MAGIC	(0x5afc4453)
 
 static unsigned long sa1100wdt_users;
-static int expect_close;
 static int pre_margin;
 static int boot_status;
-static int nowayout = WATCHDOG_NOWAYOUT;
 
 /*
  *	Allow only one person to hold it open
@@ -62,55 +59,33 @@
 }
 
 /*
- *	Shut off the timer.
- * 	Lock it in if it's a module and we defined ...NOWAYOUT
- *	Oddly, the watchdog can only be enabled, but we can turn off
- *	the interrupt, which appears to prevent the watchdog timing out.
+ * The watchdog cannot be disabled.
+ *
+ * Previous comments suggested that turning off the interrupt by
+ * clearing OIER[E3] would prevent the watchdog timing out but this
+ * does not appear to be true (at least on the PXA255).
  */
 static int sa1100dog_release(struct inode *inode, struct file *file)
 {
-	OSMR3 = OSCR + pre_margin;
-
-	if (expect_close == SA1100_CLOSE_MAGIC) {
-		OIER &= ~OIER_E3;
-	} else {
-		printk(KERN_CRIT "WATCHDOG: WDT device closed unexpectedly.  WDT will not stop!\n");
-	}
+	printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
 
 	clear_bit(1, &sa1100wdt_users);
-	expect_close = 0;
 
 	return 0;
 }
 
 static ssize_t sa1100dog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
 {
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			expect_close = 0;
-
-			for (i = 0; i != len; i++) {
-				char c;
-
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = SA1100_CLOSE_MAGIC;
-			}
-		}
+	if (len)
 		/* Refresh OSMR3 timer. */
 		OSMR3 = OSCR + pre_margin;
-	}
 
 	return len;
 }
 
 static struct watchdog_info ident = {
-	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
-			  WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-	.identity	= "SA1100 Watchdog",
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity	= "SA1100/PXA255 Watchdog",
 };
 
 static int sa1100dog_ioctl(struct inode *inode, struct file *file,
@@ -172,7 +147,7 @@
 static struct miscdevice sa1100dog_miscdev =
 {
 	.minor		= WATCHDOG_MINOR,
-	.name		= "SA1100/PXA2xx watchdog",
+	.name		= "watchdog",
 	.fops		= &sa1100dog_fops,
 };
 
@@ -194,7 +169,6 @@
 	if (ret == 0)
 		printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
 		       margin);
-
 	return ret;
 }
 
@@ -212,8 +186,5 @@
 module_param(margin, int, 0);
 MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
 
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7a7859d..10b0149 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1130,7 +1130,7 @@
 			  unsigned int target_freq,
 			  unsigned int relation)
 {
-	unsigned int ret;
+	int ret;
 
 	policy = cpufreq_cpu_get(policy->cpu);
 	if (!policy)
@@ -1151,7 +1151,7 @@
 
 static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
 {
-	int ret = -EINVAL;
+	int ret;
 
 	if (!try_module_get(policy->governor->owner))
 		return -EINVAL;
diff --git a/drivers/fc4/fc.c b/drivers/fc4/fc.c
index 5d961f5..e4710d1 100644
--- a/drivers/fc4/fc.c
+++ b/drivers/fc4/fc.c
@@ -1004,8 +1004,8 @@
 		return FAILED;
 	}
 	fc->rst_pkt->eh_state = SCSI_STATE_UNUSED;
-	return SUCCESS;
 #endif
+	return SUCCESS;
 }
 
 static int __fcp_scsi_host_reset(Scsi_Cmnd *SCpnt)
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
index 53c95c0..ae1fb45 100644
--- a/drivers/firmware/pcdp.c
+++ b/drivers/firmware/pcdp.c
@@ -25,14 +25,22 @@
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	int mmio;
 	static char options[64], *p = options;
+	char parity;
 
 	mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
 	p += sprintf(p, "console=uart,%s,0x%lx",
 		mmio ? "mmio" : "io", uart->addr.address);
-	if (uart->baud)
+	if (uart->baud) {
 		p += sprintf(p, ",%lu", uart->baud);
-	if (uart->bits)
-		p += sprintf(p, "n%d", uart->bits);
+		if (uart->bits) {
+			switch (uart->parity) {
+			    case 0x2: parity = 'e'; break;
+			    case 0x3: parity = 'o'; break;
+			    default:  parity = 'n';
+			}
+			p += sprintf(p, "%c%d", parity, uart->bits);
+		}
+	}
 
 	return early_serial_console_init(options);
 #else
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 3c85fe1..4fa17c7 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -393,7 +393,7 @@
 
 	value = data->config3;
 	if (data->config3 & CFG3_GPIO16_ENABLE) {
-		dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+		dev_dbg(&client->dev, "GPIO16 enabled.  THERM "
 			"pin disabled.\n");
 	} else {
 		dev_dbg(&client->dev, "THERM pin enabled.  "
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 0bcf82b..fca3fc1 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/i2c-vid.h>
@@ -80,9 +81,7 @@
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > HZ) ||
-	    (jiffies < data->last_updated) ||
-	    !data->valid) {
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 
 		/* Update local register data */
 		data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID);
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 3beaa61..270015b 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -32,6 +32,7 @@
 
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/init.h>
@@ -572,8 +573,7 @@
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > 2 * HZ) ||
-			(jiffies < data->last_updated) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 		int i;
 
 		dev_dbg(&client->dev, "Starting fscpos update\n");
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index a13a504..80ae8d3 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/i2c-vid.h>
@@ -678,8 +679,7 @@
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > 2 * HZ) ||
-	    (jiffies < data->last_updated) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 
 		dev_dbg(&client->dev, "Starting gl520sm update\n");
 
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index bf553dc..3c159f1 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -363,7 +363,7 @@
 	i2c_del_driver(&max1619_driver);
 }
 
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
 	"Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("MAX1619 sensor driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 876c68f..fa4032d 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1043,7 +1043,7 @@
 	if (init >= 2 && data->innr) {
 		reg = pc87360_read_value(data, LD_IN, NO_BANK,
 					 PC87365_REG_IN_CONVRATE);
-		dev_info(&client->dev, "VLM conversion set to"
+		dev_info(&client->dev, "VLM conversion set to "
 			 "1s period, 160us delay\n");
 		pc87360_write_value(data, LD_IN, NO_BANK,
 				    PC87365_REG_IN_CONVRATE,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 0ab7e37..1ab4131 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -137,7 +137,7 @@
 		pci_read_config_word(I801_dev, SMBBA, &i801_smba);
 		i801_smba &= 0xfff0;
 		if(i801_smba == 0) {
-			dev_err(&dev->dev, "SMB base address uninitialized"
+			dev_err(&dev->dev, "SMB base address uninitialized "
 				"- upgrade BIOS or use force_addr=0xaddr\n");
 			return -ENODEV;
 		}
@@ -186,7 +186,7 @@
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 		inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@
 		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 
 	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
 			"(%02x)\n", temp);
 	}
 	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 74ece8a..82cf959 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -165,7 +165,7 @@
 	buf[0] = 0;		/* reg offset */
 	buf[1] = BIN2BCD(dt->tm_sec);
 	buf[2] = BIN2BCD(dt->tm_min);
-	buf[3] = BIN2BCD(dt->tm_hour) | (1 << 6);
+	buf[3] = BIN2BCD(dt->tm_hour);
 	buf[4] = BIN2BCD(dt->tm_wday) + 1;
 	buf[5] = BIN2BCD(dt->tm_mday);
 	buf[6] = BIN2BCD(dt->tm_mon) + 1;
@@ -344,9 +344,9 @@
 
 	/* Ensure that device is set in 24-hour mode */
 	val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
-	if ((val >= 0) && (val & (1 << 6)) == 0)
+	if ((val >= 0) && (val & (1 << 6)))
 		i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
-					  val | (1 << 6));
+					  val & 0x3f);
 }
 
 static int ds1337_detach_client(struct i2c_client *client)
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 6ea413f..a2da31b 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -163,6 +163,11 @@
 	struct eeprom_data *data;
 	int err = 0;
 
+	/* prevent 24RF08 corruption */
+	if (kind < 0)
+		i2c_smbus_xfer(adapter, address, 0, 0, 0,
+			       I2C_SMBUS_QUICK, NULL);
+
 	/* There are three ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
 	   (2) Consecutive byte reads (100% overhead)
@@ -187,9 +192,6 @@
 	new_client->driver = &eeprom_driver;
 	new_client->flags = 0;
 
-	/* prevent 24RF08 corruption */
-	i2c_smbus_write_quick(new_client, 0);
-
 	/* Fill in the remaining client fields */
 	strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
 	data->valid = 0;
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index c4f14d9..0230375 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -343,6 +343,11 @@
 	struct max6875_data *data;
 	int err = 0;
 
+	/* Prevent 24RF08 corruption (in case of user error) */
+	if (kind < 0)
+		i2c_smbus_xfer(adapter, address, 0, 0, 0,
+			       I2C_SMBUS_QUICK, NULL);
+
 	/* There are three ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
 	   (2) Consecutive byte reads (100% overhead)
@@ -370,9 +375,6 @@
 	new_client->driver = &max6875_driver;
 	new_client->flags = 0;
 
-	/* Prevent 24RF08 corruption */
-	i2c_smbus_write_quick(new_client, 0);
-
 	/* Setup the user section */
 	data->blocks[max6875_eeprom_user].type    = max6875_eeprom_user;
 	data->blocks[max6875_eeprom_user].slices  = USER_EEPROM_SLICES;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 4fd4f52..4a9ead2 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -231,8 +231,8 @@
 		if (driver->detach_adapter)
 			if ((res = driver->detach_adapter(adap))) {
 				dev_warn(&adap->dev, "can't detach adapter "
-					 "while detaching driver %s: driver not "
-					 "detached!", driver->name);
+					 "while detaching driver %s: driver "
+					 "not detached!\n", driver->name);
 				goto out_unlock;
 			}
 	}
@@ -456,8 +456,8 @@
 		res = adapter->client_unregister(client);
 		if (res) {
 			dev_err(&client->dev,
-			       "client_unregister [%s] failed, "
-			       "client not detached", client->name);
+				"client_unregister [%s] failed, "
+				"client not detached\n", client->name);
 			goto out;
 		}
 	}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 7df85af..94daf40 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -960,6 +960,15 @@
 }
 #endif /* MAX_HWIFS > 1 */
 
+static inline int hwif_to_node(ide_hwif_t *hwif)
+{
+	if (hwif->pci_dev)
+		return pcibus_to_node(hwif->pci_dev->bus);
+	else
+		/* Add ways to determine the node of other busses here */
+		return -1;
+}
+
 /*
  * init request queue
  */
@@ -978,8 +987,7 @@
 	 *	do not.
 	 */
 
-	q = blk_init_queue_node(do_ide_request, &ide_lock,
-				pcibus_to_node(drive->hwif->pci_dev->bus));
+	q = blk_init_queue_node(do_ide_request, &ide_lock, hwif_to_node(hwif));
 	if (!q)
 		return 1;
 
@@ -1048,6 +1056,8 @@
 
 	BUG_ON(in_interrupt());
 	BUG_ON(irqs_disabled());	
+	BUG_ON(hwif == NULL);
+
 	down(&ide_cfg_sem);
 	hwif->hwgroup = NULL;
 #if MAX_HWIFS > 1
@@ -1097,7 +1107,7 @@
 		spin_unlock_irq(&ide_lock);
 	} else {
 		hwgroup = kmalloc_node(sizeof(ide_hwgroup_t), GFP_KERNEL,
-			pcibus_to_node(hwif->drives[0].hwif->pci_dev->bus));
+					hwif_to_node(hwif->drives[0].hwif));
 		if (!hwgroup)
 	       		goto out_up;
 
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index aac5975..f1d1ec4 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -465,7 +465,7 @@
 	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
-	PCMCIA_DEVICE_PROD_ID12("EXP", "CD", 0x6f58c983, 0xaae5994f),
+	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
 	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
@@ -481,6 +481,7 @@
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, ide_ids);
@@ -507,5 +508,5 @@
 	BUG_ON(dev_list != NULL);
 }
 
-module_init(init_ide_cs);
+late_initcall(init_ide_cs);
 module_exit(exit_ide_cs);
diff --git a/drivers/infiniband/include/ib_cm.h b/drivers/infiniband/include/ib_cm.h
index e5d74a7..da65011 100644
--- a/drivers/infiniband/include/ib_cm.h
+++ b/drivers/infiniband/include/ib_cm.h
@@ -169,7 +169,8 @@
 	IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS	= __constant_htons(21),
 	IB_CM_REJ_INVALID_ALT_HOP_LIMIT		= __constant_htons(22),
 	IB_CM_REJ_INVALID_ALT_PACKET_RATE	= __constant_htons(23),
-	IB_CM_REJ_PORT_REDIRECT			= __constant_htons(24),
+	IB_CM_REJ_PORT_CM_REDIRECT		= __constant_htons(24),
+	IB_CM_REJ_PORT_REDIRECT			= __constant_htons(25),
 	IB_CM_REJ_INVALID_MTU			= __constant_htons(26),
 	IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES	= __constant_htons(27),
 	IB_CM_REJ_CONSUMER_DEFINED		= __constant_htons(28),
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 6f60abb..fa00816 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -600,9 +600,10 @@
 
 			ipoib_mcast_send(dev, (union ib_gid *) (phdr->hwaddr + 4), skb);
 		} else {
-			/* unicast GID -- should be ARP reply */
+			/* unicast GID -- should be ARP or RARP reply */
 
-			if (be16_to_cpup((u16 *) skb->data) != ETH_P_ARP) {
+			if ((be16_to_cpup((__be16 *) skb->data) != ETH_P_ARP) &&
+			    (be16_to_cpup((__be16 *) skb->data) != ETH_P_RARP)) {
 				ipoib_warn(priv, "Unicast, no %s: type %04x, QPN %06x "
 					   IPOIB_GID_FMT "\n",
 					   skb->dst ? "neigh" : "dst",
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 374f404..20e3a16 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -320,6 +320,7 @@
 			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize) return -EINVAL;
 			if (get_user(v, ip + 1)) return -EFAULT;
 			if (v < 0 || v > KEY_MAX) return -EINVAL;
+			if (v >> (dev->keycodesize * 8)) return -EINVAL;
 			u = SET_INPUT_KEYCODE(dev, t, v);
 			clear_bit(u, dev->keybit);
 			set_bit(v, dev->keybit);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 7c4b4d3..a275211 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -48,12 +48,6 @@
 
 static struct input_handler *input_table[8];
 
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *proc_bus_input_dir;
-static DECLARE_WAIT_QUEUE_HEAD(input_devices_poll_wait);
-static int input_devices_state;
-#endif
-
 void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct input_handle *handle;
@@ -312,6 +306,7 @@
 	return NULL;
 }
 
+
 /*
  * Input hotplugging interface - loading event handlers based on
  * device bitfields.
@@ -428,162 +423,27 @@
 
 #endif
 
-void input_register_device(struct input_dev *dev)
-{
-	struct input_handle *handle;
-	struct input_handler *handler;
-	struct input_device_id *id;
-
-	set_bit(EV_SYN, dev->evbit);
-
-	init_MUTEX(&dev->sem);
-
-	/*
-	 * If delay and period are pre-set by the driver, then autorepeating
-	 * is handled by the driver itself and we don't do it in input.c.
-	 */
-
-	init_timer(&dev->timer);
-	if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
-		dev->timer.data = (long) dev;
-		dev->timer.function = input_repeat_key;
-		dev->rep[REP_DELAY] = 250;
-		dev->rep[REP_PERIOD] = 33;
-	}
-
-	INIT_LIST_HEAD(&dev->h_list);
-	list_add_tail(&dev->node, &input_dev_list);
-
-	list_for_each_entry(handler, &input_handler_list, node)
-		if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
-			if ((id = input_match_device(handler->id_table, dev)))
-				if ((handle = handler->connect(handler, dev, id)))
-					input_link_handle(handle);
-
-#ifdef CONFIG_HOTPLUG
-	input_call_hotplug("add", dev);
-#endif
-
 #ifdef CONFIG_PROC_FS
+
+static struct proc_dir_entry *proc_bus_input_dir;
+static DECLARE_WAIT_QUEUE_HEAD(input_devices_poll_wait);
+static int input_devices_state;
+
+static inline void input_wakeup_procfs_readers(void)
+{
 	input_devices_state++;
 	wake_up(&input_devices_poll_wait);
-#endif
 }
 
-void input_unregister_device(struct input_dev *dev)
+static unsigned int input_devices_poll(struct file *file, poll_table *wait)
 {
-	struct list_head * node, * next;
-
-	if (!dev) return;
-
-	del_timer_sync(&dev->timer);
-
-	list_for_each_safe(node, next, &dev->h_list) {
-		struct input_handle * handle = to_handle(node);
-		list_del_init(&handle->d_node);
-		list_del_init(&handle->h_node);
-		handle->handler->disconnect(handle);
-	}
-
-#ifdef CONFIG_HOTPLUG
-	input_call_hotplug("remove", dev);
-#endif
-
-	list_del_init(&dev->node);
-
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	int state = input_devices_state;
+	poll_wait(file, &input_devices_poll_wait, wait);
+	if (state != input_devices_state)
+		return POLLIN | POLLRDNORM;
+	return 0;
 }
 
-void input_register_handler(struct input_handler *handler)
-{
-	struct input_dev *dev;
-	struct input_handle *handle;
-	struct input_device_id *id;
-
-	if (!handler) return;
-
-	INIT_LIST_HEAD(&handler->h_list);
-
-	if (handler->fops != NULL)
-		input_table[handler->minor >> 5] = handler;
-
-	list_add_tail(&handler->node, &input_handler_list);
-
-	list_for_each_entry(dev, &input_dev_list, node)
-		if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
-			if ((id = input_match_device(handler->id_table, dev)))
-				if ((handle = handler->connect(handler, dev, id)))
-					input_link_handle(handle);
-
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
-}
-
-void input_unregister_handler(struct input_handler *handler)
-{
-	struct list_head * node, * next;
-
-	list_for_each_safe(node, next, &handler->h_list) {
-		struct input_handle * handle = to_handle_h(node);
-		list_del_init(&handle->h_node);
-		list_del_init(&handle->d_node);
-		handler->disconnect(handle);
-	}
-
-	list_del_init(&handler->node);
-
-	if (handler->fops != NULL)
-		input_table[handler->minor >> 5] = NULL;
-
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
-}
-
-static int input_open_file(struct inode *inode, struct file *file)
-{
-	struct input_handler *handler = input_table[iminor(inode) >> 5];
-	struct file_operations *old_fops, *new_fops = NULL;
-	int err;
-
-	/* No load-on-demand here? */
-	if (!handler || !(new_fops = fops_get(handler->fops)))
-		return -ENODEV;
-
-	/*
-	 * That's _really_ odd. Usually NULL ->open means "nothing special",
-	 * not "no device". Oh, well...
-	 */
-	if (!new_fops->open) {
-		fops_put(new_fops);
-		return -ENODEV;
-	}
-	old_fops = file->f_op;
-	file->f_op = new_fops;
-
-	err = new_fops->open(inode, file);
-
-	if (err) {
-		fops_put(file->f_op);
-		file->f_op = fops_get(old_fops);
-	}
-	fops_put(old_fops);
-	return err;
-}
-
-static struct file_operations input_fops = {
-	.owner = THIS_MODULE,
-	.open = input_open_file,
-};
-
-#ifdef CONFIG_PROC_FS
-
 #define SPRINTF_BIT_B(bit, name, max) \
 	do { \
 		len += sprintf(buf + len, "B: %s", name); \
@@ -600,16 +460,6 @@
 			SPRINTF_BIT_B(bit, name, max); \
 	} while (0)
 
-
-static unsigned int input_devices_poll(struct file *file, poll_table *wait)
-{
-	int state = input_devices_state;
-	poll_wait(file, &input_devices_poll_wait, wait);
-	if (state != input_devices_state)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
 static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
 {
 	struct input_dev *dev;
@@ -704,68 +554,225 @@
 	struct proc_dir_entry *entry;
 
 	proc_bus_input_dir = proc_mkdir("input", proc_bus);
-	if (proc_bus_input_dir == NULL)
+	if (!proc_bus_input_dir)
 		return -ENOMEM;
+
 	proc_bus_input_dir->owner = THIS_MODULE;
+
 	entry = create_proc_read_entry("devices", 0, proc_bus_input_dir, input_devices_read, NULL);
-	if (entry == NULL) {
-		remove_proc_entry("input", proc_bus);
-		return -ENOMEM;
-	}
+	if (!entry)
+		goto fail1;
+
 	entry->owner = THIS_MODULE;
 	input_fileops = *entry->proc_fops;
 	entry->proc_fops = &input_fileops;
 	entry->proc_fops->poll = input_devices_poll;
+
 	entry = create_proc_read_entry("handlers", 0, proc_bus_input_dir, input_handlers_read, NULL);
-	if (entry == NULL) {
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		return -ENOMEM;
-	}
+	if (!entry)
+		goto fail2;
+
 	entry->owner = THIS_MODULE;
+
 	return 0;
+
+ fail2:	remove_proc_entry("devices", proc_bus_input_dir);
+ fail1: remove_proc_entry("input", proc_bus);
+	return -ENOMEM;
 }
+
+static void input_proc_exit(void)
+{
+	remove_proc_entry("devices", proc_bus_input_dir);
+	remove_proc_entry("handlers", proc_bus_input_dir);
+	remove_proc_entry("input", proc_bus);
+}
+
 #else /* !CONFIG_PROC_FS */
+static inline void input_wakeup_procfs_readers(void) { }
 static inline int input_proc_init(void) { return 0; }
+static inline void input_proc_exit(void) { }
 #endif
 
+void input_register_device(struct input_dev *dev)
+{
+	struct input_handle *handle;
+	struct input_handler *handler;
+	struct input_device_id *id;
+
+	set_bit(EV_SYN, dev->evbit);
+
+	init_MUTEX(&dev->sem);
+
+	/*
+	 * If delay and period are pre-set by the driver, then autorepeating
+	 * is handled by the driver itself and we don't do it in input.c.
+	 */
+
+	init_timer(&dev->timer);
+	if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
+		dev->timer.data = (long) dev;
+		dev->timer.function = input_repeat_key;
+		dev->rep[REP_DELAY] = 250;
+		dev->rep[REP_PERIOD] = 33;
+	}
+
+	INIT_LIST_HEAD(&dev->h_list);
+	list_add_tail(&dev->node, &input_dev_list);
+
+	list_for_each_entry(handler, &input_handler_list, node)
+		if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
+			if ((id = input_match_device(handler->id_table, dev)))
+				if ((handle = handler->connect(handler, dev, id)))
+					input_link_handle(handle);
+
+#ifdef CONFIG_HOTPLUG
+	input_call_hotplug("add", dev);
+#endif
+
+	input_wakeup_procfs_readers();
+}
+
+void input_unregister_device(struct input_dev *dev)
+{
+	struct list_head * node, * next;
+
+	if (!dev) return;
+
+	del_timer_sync(&dev->timer);
+
+	list_for_each_safe(node, next, &dev->h_list) {
+		struct input_handle * handle = to_handle(node);
+		list_del_init(&handle->d_node);
+		list_del_init(&handle->h_node);
+		handle->handler->disconnect(handle);
+	}
+
+#ifdef CONFIG_HOTPLUG
+	input_call_hotplug("remove", dev);
+#endif
+
+	list_del_init(&dev->node);
+
+	input_wakeup_procfs_readers();
+}
+
+void input_register_handler(struct input_handler *handler)
+{
+	struct input_dev *dev;
+	struct input_handle *handle;
+	struct input_device_id *id;
+
+	if (!handler) return;
+
+	INIT_LIST_HEAD(&handler->h_list);
+
+	if (handler->fops != NULL)
+		input_table[handler->minor >> 5] = handler;
+
+	list_add_tail(&handler->node, &input_handler_list);
+
+	list_for_each_entry(dev, &input_dev_list, node)
+		if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
+			if ((id = input_match_device(handler->id_table, dev)))
+				if ((handle = handler->connect(handler, dev, id)))
+					input_link_handle(handle);
+
+	input_wakeup_procfs_readers();
+}
+
+void input_unregister_handler(struct input_handler *handler)
+{
+	struct list_head * node, * next;
+
+	list_for_each_safe(node, next, &handler->h_list) {
+		struct input_handle * handle = to_handle_h(node);
+		list_del_init(&handle->h_node);
+		list_del_init(&handle->d_node);
+		handler->disconnect(handle);
+	}
+
+	list_del_init(&handler->node);
+
+	if (handler->fops != NULL)
+		input_table[handler->minor >> 5] = NULL;
+
+	input_wakeup_procfs_readers();
+}
+
+static int input_open_file(struct inode *inode, struct file *file)
+{
+	struct input_handler *handler = input_table[iminor(inode) >> 5];
+	struct file_operations *old_fops, *new_fops = NULL;
+	int err;
+
+	/* No load-on-demand here? */
+	if (!handler || !(new_fops = fops_get(handler->fops)))
+		return -ENODEV;
+
+	/*
+	 * That's _really_ odd. Usually NULL ->open means "nothing special",
+	 * not "no device". Oh, well...
+	 */
+	if (!new_fops->open) {
+		fops_put(new_fops);
+		return -ENODEV;
+	}
+	old_fops = file->f_op;
+	file->f_op = new_fops;
+
+	err = new_fops->open(inode, file);
+
+	if (err) {
+		fops_put(file->f_op);
+		file->f_op = fops_get(old_fops);
+	}
+	fops_put(old_fops);
+	return err;
+}
+
+static struct file_operations input_fops = {
+	.owner = THIS_MODULE,
+	.open = input_open_file,
+};
+
 struct class *input_class;
 
 static int __init input_init(void)
 {
-	int retval = -ENOMEM;
+	int err;
 
 	input_class = class_create(THIS_MODULE, "input");
-	if (IS_ERR(input_class))
+	if (IS_ERR(input_class)) {
+		printk(KERN_ERR "input: unable to register input class\n");
 		return PTR_ERR(input_class);
-	input_proc_init();
-	retval = register_chrdev(INPUT_MAJOR, "input", &input_fops);
-	if (retval) {
-		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("handlers", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		class_destroy(input_class);
-		return retval;
 	}
 
-	retval = devfs_mk_dir("input");
-	if (retval) {
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("handlers", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		unregister_chrdev(INPUT_MAJOR, "input");
-		class_destroy(input_class);
+	err = input_proc_init();
+	if (err)
+		goto fail1;
+
+	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
+	if (err) {
+		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
+		goto fail2;
 	}
-	return retval;
+
+	err = devfs_mk_dir("input");
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	unregister_chrdev(INPUT_MAJOR, "input");
+ fail2:	input_proc_exit();
+ fail1:	class_destroy(input_class);
+	return err;
 }
 
 static void __exit input_exit(void)
 {
-	remove_proc_entry("devices", proc_bus_input_dir);
-	remove_proc_entry("handlers", proc_bus_input_dir);
-	remove_proc_entry("input", proc_bus);
-
+	input_proc_exit();
 	devfs_remove("input");
 	unregister_chrdev(INPUT_MAJOR, "input");
 	class_destroy(input_class);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index ff8e1bb..e0938d1 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -37,8 +37,6 @@
 #define JOYDEV_MINORS		16
 #define JOYDEV_BUFFER_SIZE	64
 
-#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-
 struct joydev {
 	int exist;
 	int open;
@@ -117,7 +115,7 @@
 			return;
 	}
 
-	event.time = MSECS(jiffies);
+	event.time = jiffies_to_msecs(jiffies);
 
 	list_for_each_entry(list, &joydev->list, node) {
 
@@ -245,7 +243,7 @@
 
 		struct js_event event;
 
-		event.time = MSECS(jiffies);
+		event.time = jiffies_to_msecs(jiffies);
 
 		if (list->startup < joydev->nkey) {
 			event.type = JS_EVENT_BUTTON | JS_EVENT_INIT;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 9871099..d5c5b32 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -36,16 +36,6 @@
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
 
-static int uinput_dev_open(struct input_dev *dev)
-{
-	return 0;
-}
-
-static void uinput_dev_close(struct input_dev *dev)
-{
-
-}
-
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct uinput_device	*udev;
@@ -63,22 +53,24 @@
 	return 0;
 }
 
-static int uinput_request_alloc_id(struct input_dev *dev, struct uinput_request *request)
+static int uinput_request_alloc_id(struct uinput_device *udev, struct uinput_request *request)
 {
 	/* Atomically allocate an ID for the given request. Returns 0 on success. */
-	struct uinput_device *udev = dev->private;
 	int id;
+	int err = -1;
 
-	down(&udev->requests_sem);
-	for (id=0; id<UINPUT_NUM_REQUESTS; id++)
+	spin_lock(&udev->requests_lock);
+
+	for (id = 0; id < UINPUT_NUM_REQUESTS; id++)
 		if (!udev->requests[id]) {
-			udev->requests[id] = request;
 			request->id = id;
-			up(&udev->requests_sem);
-			return 0;
+			udev->requests[id] = request;
+			err = 0;
+			break;
 		}
-	up(&udev->requests_sem);
-	return -1;
+
+	spin_unlock(&udev->requests_lock);
+	return err;
 }
 
 static struct uinput_request* uinput_request_find(struct uinput_device *udev, int id)
@@ -86,70 +78,78 @@
 	/* Find an input request, by ID. Returns NULL if the ID isn't valid. */
 	if (id >= UINPUT_NUM_REQUESTS || id < 0)
 		return NULL;
-	if (udev->requests[id]->completed)
-		return NULL;
 	return udev->requests[id];
 }
 
-static void uinput_request_init(struct input_dev *dev, struct uinput_request *request, int code)
+static inline int uinput_request_reserve_slot(struct uinput_device *udev, struct uinput_request *request)
 {
-	struct uinput_device *udev = dev->private;
-
-	memset(request, 0, sizeof(struct uinput_request));
-	request->code = code;
-	init_waitqueue_head(&request->waitq);
-
-	/* Allocate an ID. If none are available right away, wait. */
-	request->retval = wait_event_interruptible(udev->requests_waitq,
-				       !uinput_request_alloc_id(dev, request));
+	/* Allocate slot. If none are available right away, wait. */
+	return wait_event_interruptible(udev->requests_waitq,
+					!uinput_request_alloc_id(udev, request));
 }
 
-static void uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
+static void uinput_request_done(struct uinput_device *udev, struct uinput_request *request)
 {
-	struct uinput_device *udev = dev->private;
+	complete(&request->done);
+
+	/* Mark slot as available */
+	udev->requests[request->id] = NULL;
+	wake_up_interruptible(&udev->requests_waitq);
+}
+
+static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
+{
 	int retval;
 
 	/* Tell our userspace app about this new request by queueing an input event */
 	uinput_dev_event(dev, EV_UINPUT, request->code, request->id);
 
 	/* Wait for the request to complete */
-	retval = wait_event_interruptible(request->waitq, request->completed);
-	if (retval)
-		request->retval = retval;
+	retval = wait_for_completion_interruptible(&request->done);
+	if (!retval)
+		retval = request->retval;
 
-	/* Release this request's ID, let others know it's available */
-	udev->requests[request->id] = NULL;
-	wake_up_interruptible(&udev->requests_waitq);
+	return retval;
 }
 
 static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *effect)
 {
 	struct uinput_request request;
+	int retval;
 
 	if (!test_bit(EV_FF, dev->evbit))
 		return -ENOSYS;
 
-	uinput_request_init(dev, &request, UI_FF_UPLOAD);
-	if (request.retval)
-		return request.retval;
+	request.id = -1;
+	init_completion(&request.done);
+	request.code = UI_FF_UPLOAD;
 	request.u.effect = effect;
-	uinput_request_submit(dev, &request);
-	return request.retval;
+
+	retval = uinput_request_reserve_slot(dev->private, &request);
+	if (!retval)
+		retval = uinput_request_submit(dev, &request);
+
+	return retval;
 }
 
 static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
 {
 	struct uinput_request request;
+	int retval;
 
 	if (!test_bit(EV_FF, dev->evbit))
 		return -ENOSYS;
 
-	uinput_request_init(dev, &request, UI_FF_ERASE);
-	if (request.retval)
-		return request.retval;
+	request.id = -1;
+	init_completion(&request.done);
+	request.code = UI_FF_ERASE;
 	request.u.effect_id = effect_id;
-	uinput_request_submit(dev, &request);
-	return request.retval;
+
+	retval = uinput_request_reserve_slot(dev->private, &request);
+	if (!retval)
+		retval = uinput_request_submit(dev, &request);
+
+	return retval;
 }
 
 static int uinput_create_device(struct uinput_device *udev)
@@ -159,32 +159,30 @@
 		return -EINVAL;
 	}
 
-	udev->dev->open = uinput_dev_open;
-	udev->dev->close = uinput_dev_close;
 	udev->dev->event = uinput_dev_event;
 	udev->dev->upload_effect = uinput_dev_upload_effect;
 	udev->dev->erase_effect = uinput_dev_erase_effect;
 	udev->dev->private = udev;
 
-	init_waitqueue_head(&(udev->waitq));
+	init_waitqueue_head(&udev->waitq);
 
 	input_register_device(udev->dev);
 
-	set_bit(UIST_CREATED, &(udev->state));
+	set_bit(UIST_CREATED, &udev->state);
 
 	return 0;
 }
 
 static int uinput_destroy_device(struct uinput_device *udev)
 {
-	if (!test_bit(UIST_CREATED, &(udev->state))) {
+	if (!test_bit(UIST_CREATED, &udev->state)) {
 		printk(KERN_WARNING "%s: create the device first\n", UINPUT_NAME);
 		return -EINVAL;
 	}
 
 	input_unregister_device(udev->dev);
 
-	clear_bit(UIST_CREATED, &(udev->state));
+	clear_bit(UIST_CREATED, &udev->state);
 
 	return 0;
 }
@@ -198,7 +196,7 @@
 	if (!newdev)
 		goto error;
 	memset(newdev, 0, sizeof(struct uinput_device));
-	init_MUTEX(&newdev->requests_sem);
+	spin_lock_init(&newdev->requests_lock);
 	init_waitqueue_head(&newdev->requests_waitq);
 
 	newinput = kmalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -253,15 +251,16 @@
 	struct uinput_user_dev	*user_dev;
 	struct input_dev	*dev;
 	struct uinput_device	*udev;
-	int			size,
-				retval;
+	char			*name;
+	int			size;
+	int			retval;
 
 	retval = count;
 
 	udev = file->private_data;
 	dev = udev->dev;
 
-	user_dev = kmalloc(sizeof(*user_dev), GFP_KERNEL);
+	user_dev = kmalloc(sizeof(struct uinput_user_dev), GFP_KERNEL);
 	if (!user_dev) {
 		retval = -ENOMEM;
 		goto exit;
@@ -272,17 +271,17 @@
 		goto exit;
 	}
 
-	if (NULL != dev->name)
+	if (dev->name)
 		kfree(dev->name);
 
 	size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
-	dev->name = kmalloc(size, GFP_KERNEL);
-	if (!dev->name) {
+	dev->name = name = kmalloc(size, GFP_KERNEL);
+	if (!name) {
 		retval = -ENOMEM;
 		goto exit;
 	}
+	strlcpy(name, user_dev->name, size);
 
-	strlcpy(dev->name, user_dev->name, size);
 	dev->id.bustype	= user_dev->id.bustype;
 	dev->id.vendor	= user_dev->id.vendor;
 	dev->id.product	= user_dev->id.product;
@@ -314,14 +313,13 @@
 {
 	struct uinput_device *udev = file->private_data;
 
-	if (test_bit(UIST_CREATED, &(udev->state))) {
+	if (test_bit(UIST_CREATED, &udev->state)) {
 		struct input_event	ev;
 
 		if (copy_from_user(&ev, buffer, sizeof(struct input_event)))
 			return -EFAULT;
 		input_event(udev->dev, ev.type, ev.code, ev.value);
-	}
-	else
+	} else
 		count = uinput_alloc_device(file, buffer, count);
 
 	return count;
@@ -332,26 +330,24 @@
 	struct uinput_device *udev = file->private_data;
 	int retval = 0;
 
-	if (!test_bit(UIST_CREATED, &(udev->state)))
+	if (!test_bit(UIST_CREATED, &udev->state))
 		return -ENODEV;
 
-	if ((udev->head == udev->tail) && (file->f_flags & O_NONBLOCK))
+	if (udev->head == udev->tail && (file->f_flags & O_NONBLOCK))
 		return -EAGAIN;
 
 	retval = wait_event_interruptible(udev->waitq,
-			(udev->head != udev->tail) ||
-			!test_bit(UIST_CREATED, &(udev->state)));
-
+			udev->head != udev->tail || !test_bit(UIST_CREATED, &udev->state));
 	if (retval)
 		return retval;
 
-	if (!test_bit(UIST_CREATED, &(udev->state)))
+	if (!test_bit(UIST_CREATED, &udev->state))
 		return -ENODEV;
 
 	while ((udev->head != udev->tail) &&
 	    (retval + sizeof(struct input_event) <= count)) {
-		if (copy_to_user(buffer + retval, &(udev->buff[udev->tail]),
-		    sizeof(struct input_event))) return -EFAULT;
+		if (copy_to_user(buffer + retval, &udev->buff[udev->tail], sizeof(struct input_event)))
+			return -EFAULT;
 		udev->tail = (udev->tail + 1) % UINPUT_BUFFER_SIZE;
 		retval += sizeof(struct input_event);
 	}
@@ -373,12 +369,12 @@
 
 static int uinput_burn_device(struct uinput_device *udev)
 {
-	if (test_bit(UIST_CREATED, &(udev->state)))
+	if (test_bit(UIST_CREATED, &udev->state))
 		uinput_destroy_device(udev);
 
-	if (NULL != udev->dev->name)
+	if (udev->dev->name)
 		kfree(udev->dev->name);
-	if (NULL != udev->dev->phys)
+	if (udev->dev->phys)
 		kfree(udev->dev->phys);
 
 	kfree(udev->dev);
@@ -389,7 +385,8 @@
 
 static int uinput_close(struct inode *inode, struct file *file)
 {
-	return uinput_burn_device(file->private_data);
+	uinput_burn_device(file->private_data);
+	return 0;
 }
 
 static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
@@ -401,6 +398,7 @@
 	struct uinput_ff_erase  ff_erase;
 	struct uinput_request   *req;
 	int                     length;
+	char			*phys;
 
 	udev = file->private_data;
 
@@ -415,7 +413,7 @@
 		case UI_SET_SNDBIT:
 		case UI_SET_FFBIT:
 		case UI_SET_PHYS:
-			if (test_bit(UIST_CREATED, &(udev->state)))
+			if (test_bit(UIST_CREATED, &udev->state))
 				return -EINVAL;
 	}
 
@@ -498,20 +496,19 @@
 				retval = -EFAULT;
 				break;
 			}
-			if (NULL != udev->dev->phys)
-				kfree(udev->dev->phys);
-			udev->dev->phys = kmalloc(length, GFP_KERNEL);
-			if (!udev->dev->phys) {
+			kfree(udev->dev->phys);
+			udev->dev->phys = phys = kmalloc(length, GFP_KERNEL);
+			if (!phys) {
 				retval = -ENOMEM;
 				break;
 			}
-			if (copy_from_user(udev->dev->phys, p, length)) {
-				retval = -EFAULT;
-				kfree(udev->dev->phys);
+			if (copy_from_user(phys, p, length)) {
 				udev->dev->phys = NULL;
+				kfree(phys);
+				retval = -EFAULT;
 				break;
 			}
-			udev->dev->phys[length-1] = '\0';
+			phys[length - 1] = '\0';
 			break;
 
 		case UI_BEGIN_FF_UPLOAD:
@@ -520,7 +517,7 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code==UI_FF_UPLOAD && req->u.effect)) {
+			if (!(req && req->code == UI_FF_UPLOAD && req->u.effect)) {
 				retval = -EINVAL;
 				break;
 			}
@@ -538,7 +535,7 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code==UI_FF_ERASE)) {
+			if (!(req && req->code == UI_FF_ERASE)) {
 				retval = -EINVAL;
 				break;
 			}
@@ -556,14 +553,13 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code==UI_FF_UPLOAD && req->u.effect)) {
+			if (!(req && req->code == UI_FF_UPLOAD && req->u.effect)) {
 				retval = -EINVAL;
 				break;
 			}
 			req->retval = ff_up.retval;
 			memcpy(req->u.effect, &ff_up.effect, sizeof(struct ff_effect));
-			req->completed = 1;
-			wake_up_interruptible(&req->waitq);
+			uinput_request_done(udev, req);
 			break;
 
 		case UI_END_FF_ERASE:
@@ -572,13 +568,12 @@
 				break;
 			}
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code==UI_FF_ERASE)) {
+			if (!(req && req->code == UI_FF_ERASE)) {
 				retval = -EINVAL;
 				break;
 			}
 			req->retval = ff_erase.retval;
-			req->completed = 1;
-			wake_up_interruptible(&req->waitq);
+			uinput_request_done(udev, req);
 			break;
 
 		default:
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index a12e981..0d68e5e 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -2,7 +2,7 @@
  * ALPS touchpad PS/2 mouse driver
  *
  * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
- * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
  * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
  * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
  *
@@ -350,7 +350,6 @@
 static int alps_reconnect(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
-	unsigned char param[4];
 	int version;
 
 	psmouse_reset(psmouse);
@@ -358,21 +357,20 @@
 	if (!(priv->i = alps_get_model(psmouse, &version)))
 		return -1;
 
-	if (priv->i->flags & ALPS_PASS && alps_passthrough_mode(psmouse, 1))
+	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		return -1;
 
-	if (alps_get_status(psmouse, param))
-		return -1;
-
-	if (!(param[0] & 0x04))
-		alps_tap_mode(psmouse, 1);
-
-	if (alps_absolute_mode(psmouse)) {
-		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
+	if (alps_tap_mode(psmouse, 1)) {
+		printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
 		return -1;
 	}
 
-	if (priv->i->flags == ALPS_PASS && alps_passthrough_mode(psmouse, 0))
+	if (alps_absolute_mode(psmouse)) {
+		printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
+		return -1;
+	}
+
+	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
 		return -1;
 
 	return 0;
@@ -389,7 +387,6 @@
 int alps_init(struct psmouse *psmouse)
 {
 	struct alps_data *priv;
-	unsigned char param[4];
 	int version;
 
 	psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL);
@@ -403,16 +400,8 @@
 	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		goto init_fail;
 
-	if (alps_get_status(psmouse, param)) {
-		printk(KERN_ERR "alps.c: touchpad status report request failed\n");
-		goto init_fail;
-	}
-
-	if (param[0] & 0x04) {
-		printk(KERN_INFO "alps.c: Enabling hardware tapping\n");
-		if (alps_tap_mode(psmouse, 1))
-			printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-	}
+	if (alps_tap_mode(psmouse, 1))
+		printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
 
 	if (alps_absolute_mode(psmouse)) {
 		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 5ab1bd7..48d2b20 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -385,8 +385,6 @@
 
 		if (buttons < 3)
 			clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
-		if (buttons < 2)
-			clear_bit(BTN_RIGHT, psmouse->dev.keybit);
 
 		if (model_info)
 			ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 19785a6..2bb2fe7 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -344,6 +344,7 @@
 		return -1;
 
 	if (set_properties) {
+		set_bit(BTN_MIDDLE, psmouse->dev.keybit);
 		set_bit(REL_WHEEL, psmouse->dev.relbit);
 
 		if (!psmouse->vendor) psmouse->vendor = "Generic";
@@ -376,6 +377,7 @@
 		return -1;
 
 	if (set_properties) {
+		set_bit(BTN_MIDDLE, psmouse->dev.keybit);
 		set_bit(REL_WHEEL, psmouse->dev.relbit);
 		set_bit(BTN_SIDE, psmouse->dev.keybit);
 		set_bit(BTN_EXTRA, psmouse->dev.keybit);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 36c7212..0293094 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -219,7 +219,7 @@
 		serio_interrupt(ptport, packet[1], 0, NULL);
 		serio_interrupt(ptport, packet[4], 0, NULL);
 		serio_interrupt(ptport, packet[5], 0, NULL);
-		if (child->type >= PSMOUSE_GENPS)
+		if (child->pktsize == 4)
 			serio_interrupt(ptport, packet[2], 0, NULL);
 	} else
 		serio_interrupt(ptport, packet[1], 0, NULL);
@@ -233,7 +233,7 @@
 
 	/* adjust the touchpad to child's choice of protocol */
 	if (child) {
-		if (child->type >= PSMOUSE_GENPS)
+		if (child->pktsize == 4)
 			priv->mode |= SYN_BIT_FOUR_BYTE_CLIENT;
 		else
 			priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
@@ -608,6 +608,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME , "Satellite"),
 		},
 	},
+	{
+		.ident = "Toshiba Dynabook",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME , "dynabook"),
+		},
+	},
 	{ }
 };
 #endif
@@ -656,7 +663,8 @@
 	 * thye same as rate of standard PS/2 mouse.
 	 */
 	if (psmouse->rate >= 80 && dmi_check_system(toshiba_dmi_table)) {
-		printk(KERN_INFO "synaptics: Toshiba Satellite detected, limiting rate to 40pps.\n");
+		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
+			dmi_get_system_info(DMI_PRODUCT_NAME));
 		psmouse->rate = 40;
 	}
 #endif
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index b371073..98acf17 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -175,7 +175,7 @@
 	  allocating minor 1 (that historically corresponds to /dev/psaux)
 	  first. To bind this driver to a serio port use sysfs interface:
 
-	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/driver
+	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called serio_raw.
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 0487ecb..03877c8 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -131,12 +131,26 @@
 		},
 	},
 	{
+		.ident = "Fujitsu-Siemens Lifebook T3010",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
+		},
+	},
+	{
 		.ident = "Toshiba P10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
 		},
 	},
+	{
+		.ident = "Alienware Sentia",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index a9bf549..708a1d3 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -100,7 +100,7 @@
 static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
 	{
 		.disable	= I8042_CTR_KBDDIS,
-		.irqen 		= I8042_CTR_KBDINT,
+		.irqen		= I8042_CTR_KBDINT,
 		.mux		= -1,
 		.name		= "KBD",
 	},
@@ -191,41 +191,45 @@
 static int i8042_command(unsigned char *param, int command)
 {
 	unsigned long flags;
-	int retval = 0, i = 0;
+	int i, retval, auxerr = 0;
 
 	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
 		return -1;
 
 	spin_lock_irqsave(&i8042_lock, flags);
 
-	retval = i8042_wait_write();
-	if (!retval) {
-		dbg("%02x -> i8042 (command)", command & 0xff);
-		i8042_write_command(command & 0xff);
+	if ((retval = i8042_wait_write()))
+		goto out;
+
+	dbg("%02x -> i8042 (command)", command & 0xff);
+	i8042_write_command(command & 0xff);
+
+	for (i = 0; i < ((command >> 12) & 0xf); i++) {
+		if ((retval = i8042_wait_write()))
+			goto out;
+		dbg("%02x -> i8042 (parameter)", param[i]);
+		i8042_write_data(param[i]);
 	}
 
-	if (!retval)
-		for (i = 0; i < ((command >> 12) & 0xf); i++) {
-			if ((retval = i8042_wait_write())) break;
-			dbg("%02x -> i8042 (parameter)", param[i]);
-			i8042_write_data(param[i]);
+	for (i = 0; i < ((command >> 8) & 0xf); i++) {
+		if ((retval = i8042_wait_read()))
+			goto out;
+
+		if (command == I8042_CMD_AUX_LOOP &&
+		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
+			retval = auxerr = -1;
+			goto out;
 		}
 
-	if (!retval)
-		for (i = 0; i < ((command >> 8) & 0xf); i++) {
-			if ((retval = i8042_wait_read())) break;
-			if (i8042_read_status() & I8042_STR_AUXDATA)
-				param[i] = ~i8042_read_data();
-			else
-				param[i] = i8042_read_data();
-			dbg("%02x <- i8042 (return)", param[i]);
-		}
-
-	spin_unlock_irqrestore(&i8042_lock, flags);
+		param[i] = i8042_read_data();
+		dbg("%02x <- i8042 (return)", param[i]);
+	}
 
 	if (retval)
-		dbg("     -- i8042 (timeout)");
+		dbg("     -- i8042 (%s)", auxerr ? "auxerr" : "timeout");
 
+ out:
+	spin_unlock_irqrestore(&i8042_lock, flags);
 	return retval;
 }
 
@@ -507,17 +511,17 @@
  */
 
 	param = 0xf0;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xf0)
 		return -1;
 	param = mode ? 0x56 : 0xf6;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0xa9 : 0x09))
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6))
 		return -1;
 	param = mode ? 0xa4 : 0xa5;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b : 0x5a))
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5))
 		return -1;
 
 	if (mux_version)
-		*mux_version = ~param;
+		*mux_version = param;
 
 	return 0;
 }
@@ -619,7 +623,7 @@
  */
 
 	param = 0x5a;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa5) {
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x5a) {
 
 /*
  * External connection test - filters out AT-soldered PS/2 i8042's
@@ -630,7 +634,7 @@
  */
 
 		if (i8042_command(&param, I8042_CMD_AUX_TEST)
-		    	|| (param && param != 0xfa && param != 0xff))
+			|| (param && param != 0xfa && param != 0xff))
 				return -1;
 	}
 
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index f367695..edd15db 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -389,6 +389,14 @@
 	return sprintf(buf, "%s\n", serio->name);
 }
 
+static ssize_t serio_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	return sprintf(buf, "serio:ty%02Xpr%02Xid%02Xex%02X\n",
+			serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
+}
+
 static ssize_t serio_show_id_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
@@ -487,6 +495,7 @@
 
 static struct device_attribute serio_device_attrs[] = {
 	__ATTR(description, S_IRUGO, serio_show_description, NULL),
+	__ATTR(modalias, S_IRUGO, serio_show_modalias, NULL),
 	__ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver),
 	__ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode),
 	__ATTR_NULL
@@ -785,36 +794,37 @@
 
 #ifdef CONFIG_HOTPLUG
 
-#define PUT_ENVP(fmt, val) 						\
-do {									\
-	envp[i++] = buffer;						\
-	length += snprintf(buffer, buffer_size - length, fmt, val);	\
-	if (buffer_size - length <= 0 || i >= num_envp)			\
-		return -ENOMEM;						\
-	length++;							\
-	buffer += length;						\
-} while (0)
+#define SERIO_ADD_HOTPLUG_VAR(fmt, val...)				\
+	do {								\
+		int err = add_hotplug_env_var(envp, num_envp, &i,	\
+					buffer, buffer_size, &len,	\
+					fmt, val);			\
+		if (err)						\
+			return err;					\
+	} while (0)
+
 static int serio_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size)
 {
 	struct serio *serio;
 	int i = 0;
-	int length = 0;
+	int len = 0;
 
 	if (!dev)
 		return -ENODEV;
 
 	serio = to_serio_port(dev);
 
-	PUT_ENVP("SERIO_TYPE=%02x", serio->id.type);
-	PUT_ENVP("SERIO_PROTO=%02x", serio->id.proto);
-	PUT_ENVP("SERIO_ID=%02x", serio->id.id);
-	PUT_ENVP("SERIO_EXTRA=%02x", serio->id.extra);
-
+	SERIO_ADD_HOTPLUG_VAR("SERIO_TYPE=%02x", serio->id.type);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_PROTO=%02x", serio->id.proto);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_ID=%02x", serio->id.id);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_EXTRA=%02x", serio->id.extra);
+	SERIO_ADD_HOTPLUG_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X",
+				serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
 	envp[i] = NULL;
 
 	return 0;
 }
-#undef PUT_ENVP
+#undef SERIO_ADD_HOTPLUG_VAR
 
 #else
 
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index d914e7e..47e08de 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -299,6 +299,7 @@
 
 	serio_raw->dev.minor = PSMOUSE_MINOR;
 	serio_raw->dev.name = serio_raw->name;
+	serio_raw->dev.dev = &serio->dev;
 	serio_raw->dev.fops = &serio_raw_fops;
 
 	err = misc_register(&serio_raw->dev);
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 7e99127..0489af5 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -58,7 +58,7 @@
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called gunze.
+	  module will be called elo.
 
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 70bca95..41df4cd 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -818,8 +818,7 @@
 	return 0;
 }
 
-static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset,
-	unsigned long sectors, int in_sync);
+static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset);
 /* * bitmap_init_from_disk -- called at bitmap_create time to initialize
  * the in-memory bitmap from the on-disk bitmap -- also, sets up the
  * memory mapping of the bitmap file
@@ -828,7 +827,7 @@
  *   previously kicked from the array, we mark all the bits as
  *   1's in order to cause a full resync.
  */
-static int bitmap_init_from_disk(struct bitmap *bitmap, int in_sync)
+static int bitmap_init_from_disk(struct bitmap *bitmap)
 {
 	unsigned long i, chunks, index, oldindex, bit;
 	struct page *page = NULL, *oldpage = NULL;
@@ -929,8 +928,7 @@
 		}
 		if (test_bit(bit, page_address(page))) {
 			/* if the disk bit is set, set the memory bit */
-			bitmap_set_memory_bits(bitmap,
-					i << CHUNK_BLOCK_SHIFT(bitmap), 1, in_sync);
+			bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap));
 			bit_cnt++;
 		}
 	}
@@ -1426,35 +1424,53 @@
 	}
 }
 
-static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset,
-				   unsigned long sectors, int in_sync)
+static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset)
 {
 	/* For each chunk covered by any of these sectors, set the
-	 * counter to 1 and set resync_needed unless in_sync.  They should all
+	 * counter to 1 and set resync_needed.  They should all
 	 * be 0 at this point
 	 */
-	while (sectors) {
-		int secs;
-		bitmap_counter_t *bmc;
-		spin_lock_irq(&bitmap->lock);
-		bmc = bitmap_get_counter(bitmap, offset, &secs, 1);
-		if (!bmc) {
-			spin_unlock_irq(&bitmap->lock);
-			return;
-		}
-		if (! *bmc) {
-			struct page *page;
-			*bmc = 1 | (in_sync? 0 : NEEDED_MASK);
-			bitmap_count_page(bitmap, offset, 1);
-			page = filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap));
-			set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
-		}
+
+	int secs;
+	bitmap_counter_t *bmc;
+	spin_lock_irq(&bitmap->lock);
+	bmc = bitmap_get_counter(bitmap, offset, &secs, 1);
+	if (!bmc) {
 		spin_unlock_irq(&bitmap->lock);
-		if (sectors > secs)
-			sectors -= secs;
-		else
-			sectors = 0;
+		return;
 	}
+	if (! *bmc) {
+		struct page *page;
+		*bmc = 1 | NEEDED_MASK;
+		bitmap_count_page(bitmap, offset, 1);
+		page = filemap_get_page(bitmap, offset >> CHUNK_BLOCK_SHIFT(bitmap));
+		set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
+	}
+	spin_unlock_irq(&bitmap->lock);
+
+}
+
+/*
+ * flush out any pending updates
+ */
+void bitmap_flush(mddev_t *mddev)
+{
+	struct bitmap *bitmap = mddev->bitmap;
+	int sleep;
+
+	if (!bitmap) /* there was no bitmap */
+		return;
+
+	/* run the daemon_work three time to ensure everything is flushed
+	 * that can be
+	 */
+	sleep = bitmap->daemon_sleep;
+	bitmap->daemon_sleep = 0;
+	bitmap_daemon_work(bitmap);
+	bitmap_daemon_work(bitmap);
+	bitmap_daemon_work(bitmap);
+	bitmap->daemon_sleep = sleep;
+	bitmap_update_sb(bitmap);
 }
 
 /*
@@ -1565,7 +1581,8 @@
 
 	/* now that we have some pages available, initialize the in-memory
 	 * bitmap from the on-disk bitmap */
-	err = bitmap_init_from_disk(bitmap, mddev->recovery_cp == MaxSector);
+	err = bitmap_init_from_disk(bitmap);
+
 	if (err)
 		return err;
 
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 12031c9..b08df8b 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1230,7 +1230,7 @@
 	if (r)
 		return r;
 
-	_kmirrord_wq = create_workqueue("kmirrord");
+	_kmirrord_wq = create_singlethread_workqueue("kmirrord");
 	if (!_kmirrord_wq) {
 		DMERR("couldn't start kmirrord");
 		dm_dirty_log_exit();
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a5a4c0e..a6d3baa 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -869,11 +869,17 @@
 
 void dm_table_presuspend_targets(struct dm_table *t)
 {
+	if (!t)
+		return;
+
 	return suspend_targets(t, 0);
 }
 
 void dm_table_postsuspend_targets(struct dm_table *t)
 {
+	if (!t)
+		return;
+
 	return suspend_targets(t, 1);
 }
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 54fabbf..d487d9d 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -55,10 +55,10 @@
  */
 #define DMF_BLOCK_IO 0
 #define DMF_SUSPENDED 1
-#define DMF_FS_LOCKED 2
 
 struct mapped_device {
-	struct rw_semaphore lock;
+	struct rw_semaphore io_lock;
+	struct semaphore suspend_lock;
 	rwlock_t map_lock;
 	atomic_t holders;
 
@@ -248,16 +248,16 @@
  */
 static int queue_io(struct mapped_device *md, struct bio *bio)
 {
-	down_write(&md->lock);
+	down_write(&md->io_lock);
 
 	if (!test_bit(DMF_BLOCK_IO, &md->flags)) {
-		up_write(&md->lock);
+		up_write(&md->io_lock);
 		return 1;
 	}
 
 	bio_list_add(&md->deferred, bio);
 
-	up_write(&md->lock);
+	up_write(&md->io_lock);
 	return 0;		/* deferred successfully */
 }
 
@@ -568,14 +568,14 @@
 	int r;
 	struct mapped_device *md = q->queuedata;
 
-	down_read(&md->lock);
+	down_read(&md->io_lock);
 
 	/*
 	 * If we're suspended we have to queue
 	 * this io for later.
 	 */
 	while (test_bit(DMF_BLOCK_IO, &md->flags)) {
-		up_read(&md->lock);
+		up_read(&md->io_lock);
 
 		if (bio_rw(bio) == READA) {
 			bio_io_error(bio, bio->bi_size);
@@ -594,11 +594,11 @@
 		 * We're in a while loop, because someone could suspend
 		 * before we get to the following read lock.
 		 */
-		down_read(&md->lock);
+		down_read(&md->io_lock);
 	}
 
 	__split_bio(md, bio);
-	up_read(&md->lock);
+	up_read(&md->io_lock);
 	return 0;
 }
 
@@ -610,7 +610,7 @@
 	int ret = -ENXIO;
 
 	if (map) {
-		ret = dm_table_flush_all(md->map);
+		ret = dm_table_flush_all(map);
 		dm_table_put(map);
 	}
 
@@ -747,7 +747,8 @@
 		goto bad1;
 
 	memset(md, 0, sizeof(*md));
-	init_rwsem(&md->lock);
+	init_rwsem(&md->io_lock);
+	init_MUTEX(&md->suspend_lock);
 	rwlock_init(&md->map_lock);
 	atomic_set(&md->holders, 1);
 	atomic_set(&md->event_nr, 0);
@@ -825,18 +826,13 @@
 	wake_up(&md->eventq);
 }
 
-static void __set_size(struct gendisk *disk, sector_t size)
+static void __set_size(struct mapped_device *md, sector_t size)
 {
-	struct block_device *bdev;
+	set_capacity(md->disk, size);
 
-	set_capacity(disk, size);
-	bdev = bdget_disk(disk, 0);
-	if (bdev) {
-		down(&bdev->bd_inode->i_sem);
-		i_size_write(bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
-		up(&bdev->bd_inode->i_sem);
-		bdput(bdev);
-	}
+	down(&md->frozen_bdev->bd_inode->i_sem);
+	i_size_write(md->frozen_bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
+	up(&md->frozen_bdev->bd_inode->i_sem);
 }
 
 static int __bind(struct mapped_device *md, struct dm_table *t)
@@ -845,17 +841,18 @@
 	sector_t size;
 
 	size = dm_table_get_size(t);
-	__set_size(md->disk, size);
+	__set_size(md, size);
 	if (size == 0)
 		return 0;
 
+	dm_table_get(t);
+	dm_table_event_callback(t, event_callback, md);
+
 	write_lock(&md->map_lock);
 	md->map = t;
+	dm_table_set_restrictions(t, q);
 	write_unlock(&md->map_lock);
 
-	dm_table_get(t);
-	dm_table_event_callback(md->map, event_callback, md);
-	dm_table_set_restrictions(t, q);
 	return 0;
 }
 
@@ -935,7 +932,7 @@
 	struct dm_table *map = dm_get_table(md);
 
 	if (atomic_dec_and_test(&md->holders)) {
-		if (!test_bit(DMF_SUSPENDED, &md->flags) && map) {
+		if (!dm_suspended(md)) {
 			dm_table_presuspend_targets(map);
 			dm_table_postsuspend_targets(map);
 		}
@@ -968,17 +965,17 @@
 {
 	int r = -EINVAL;
 
-	down_write(&md->lock);
+	down(&md->suspend_lock);
 
 	/* device must be suspended */
-	if (!test_bit(DMF_SUSPENDED, &md->flags))
+	if (!dm_suspended(md))
 		goto out;
 
 	__unbind(md);
 	r = __bind(md, table);
 
 out:
-	up_write(&md->lock);
+	up(&md->suspend_lock);
 	return r;
 }
 
@@ -986,16 +983,13 @@
  * Functions to lock and unlock any filesystem running on the
  * device.
  */
-static int __lock_fs(struct mapped_device *md)
+static int lock_fs(struct mapped_device *md)
 {
-	int error = -ENOMEM;
-
-	if (test_and_set_bit(DMF_FS_LOCKED, &md->flags))
-		return 0;
+	int r = -ENOMEM;
 
 	md->frozen_bdev = bdget_disk(md->disk, 0);
 	if (!md->frozen_bdev) {
-		DMWARN("bdget failed in __lock_fs");
+		DMWARN("bdget failed in lock_fs");
 		goto out;
 	}
 
@@ -1003,13 +997,13 @@
 
 	md->frozen_sb = freeze_bdev(md->frozen_bdev);
 	if (IS_ERR(md->frozen_sb)) {
-		error = PTR_ERR(md->frozen_sb);
+		r = PTR_ERR(md->frozen_sb);
 		goto out_bdput;
 	}
 
 	/* don't bdput right now, we don't want the bdev
 	 * to go away while it is locked.  We'll bdput
-	 * in __unlock_fs
+	 * in unlock_fs
 	 */
 	return 0;
 
@@ -1018,15 +1012,11 @@
 	md->frozen_sb = NULL;
 	md->frozen_bdev = NULL;
 out:
-	clear_bit(DMF_FS_LOCKED, &md->flags);
-	return error;
+	return r;
 }
 
-static void __unlock_fs(struct mapped_device *md)
+static void unlock_fs(struct mapped_device *md)
 {
-	if (!test_and_clear_bit(DMF_FS_LOCKED, &md->flags))
-		return;
-
 	thaw_bdev(md->frozen_bdev, md->frozen_sb);
 	bdput(md->frozen_bdev);
 
@@ -1043,50 +1033,37 @@
  */
 int dm_suspend(struct mapped_device *md)
 {
-	struct dm_table *map;
+	struct dm_table *map = NULL;
 	DECLARE_WAITQUEUE(wait, current);
-	int error = -EINVAL;
+	int r = -EINVAL;
 
-	/* Flush I/O to the device. */
-	down_read(&md->lock);
-	if (test_bit(DMF_BLOCK_IO, &md->flags))
-		goto out_read_unlock;
+	down(&md->suspend_lock);
+
+	if (dm_suspended(md))
+		goto out;
 
 	map = dm_get_table(md);
-	if (map)
-		/* This does not get reverted if there's an error later. */
-		dm_table_presuspend_targets(map);
 
-	error = __lock_fs(md);
-	if (error) {
-		dm_table_put(map);
-		goto out_read_unlock;
-	}
+	/* This does not get reverted if there's an error later. */
+	dm_table_presuspend_targets(map);
 
-	up_read(&md->lock);
+	/* Flush I/O to the device. */
+	r = lock_fs(md);
+	if (r)
+		goto out;
 
 	/*
 	 * First we set the BLOCK_IO flag so no more ios will be mapped.
-	 *
-	 * If the flag is already set we know another thread is trying to
-	 * suspend as well, so we leave the fs locked for this thread.
 	 */
-	error = -EINVAL;
-	down_write(&md->lock);
-	if (test_and_set_bit(DMF_BLOCK_IO, &md->flags)) {
-		if (map)
-			dm_table_put(map);
-		goto out_write_unlock;
-	}
+	down_write(&md->io_lock);
+	set_bit(DMF_BLOCK_IO, &md->flags);
 
 	add_wait_queue(&md->wait, &wait);
-	up_write(&md->lock);
+	up_write(&md->io_lock);
 
 	/* unplug */
-	if (map) {
+	if (map)
 		dm_table_unplug_all(map);
-		dm_table_put(map);
-	}
 
 	/*
 	 * Then we wait for the already mapped ios to
@@ -1102,62 +1079,67 @@
 	}
 	set_current_state(TASK_RUNNING);
 
-	down_write(&md->lock);
+	down_write(&md->io_lock);
 	remove_wait_queue(&md->wait, &wait);
 
 	/* were we interrupted ? */
-	error = -EINTR;
-	if (atomic_read(&md->pending))
-		goto out_unfreeze;
+	r = -EINTR;
+	if (atomic_read(&md->pending)) {
+		up_write(&md->io_lock);
+		unlock_fs(md);
+		clear_bit(DMF_BLOCK_IO, &md->flags);
+		goto out;
+	}
+	up_write(&md->io_lock);
+
+	dm_table_postsuspend_targets(map);
 
 	set_bit(DMF_SUSPENDED, &md->flags);
 
-	map = dm_get_table(md);
-	if (map)
-		dm_table_postsuspend_targets(map);
+	r = 0;
+
+out:
 	dm_table_put(map);
-	up_write(&md->lock);
-
-	return 0;
-
-out_unfreeze:
-	__unlock_fs(md);
-	clear_bit(DMF_BLOCK_IO, &md->flags);
-out_write_unlock:
-	up_write(&md->lock);
-	return error;
-
-out_read_unlock:
-	up_read(&md->lock);
-	return error;
+	up(&md->suspend_lock);
+	return r;
 }
 
 int dm_resume(struct mapped_device *md)
 {
+	int r = -EINVAL;
 	struct bio *def;
-	struct dm_table *map = dm_get_table(md);
+	struct dm_table *map = NULL;
 
-	down_write(&md->lock);
-	if (!map ||
-	    !test_bit(DMF_SUSPENDED, &md->flags) ||
-	    !dm_table_get_size(map)) {
-		up_write(&md->lock);
-		dm_table_put(map);
-		return -EINVAL;
-	}
+	down(&md->suspend_lock);
+	if (!dm_suspended(md))
+		goto out;
+
+	map = dm_get_table(md);
+	if (!map || !dm_table_get_size(map))
+		goto out;
 
 	dm_table_resume_targets(map);
-	clear_bit(DMF_SUSPENDED, &md->flags);
+
+	down_write(&md->io_lock);
 	clear_bit(DMF_BLOCK_IO, &md->flags);
 
 	def = bio_list_get(&md->deferred);
 	__flush_deferred_io(md, def);
-	up_write(&md->lock);
-	__unlock_fs(md);
-	dm_table_unplug_all(map);
-	dm_table_put(map);
+	up_write(&md->io_lock);
 
-	return 0;
+	unlock_fs(md);
+
+	clear_bit(DMF_SUSPENDED, &md->flags);
+
+	dm_table_unplug_all(map);
+
+	r = 0;
+
+out:
+	dm_table_put(map);
+	up(&md->suspend_lock);
+
+	return r;
 }
 
 /*-----------------------------------------------------------------
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 6580e0f..480f658 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1798,6 +1798,8 @@
 				goto out;
 			mddev->ro = 1;
 		} else {
+			bitmap_flush(mddev);
+			wait_event(mddev->sb_wait, atomic_read(&mddev->pending_writes)==0);
 			if (mddev->ro)
 				set_disk_ro(disk, 0);
 			blk_queue_make_request(mddev->queue, md_fail_request);
@@ -3484,7 +3486,6 @@
 			goto skip;
 		}
 		ITERATE_MDDEV(mddev2,tmp) {
-			printk(".");
 			if (mddev2 == mddev)
 				continue;
 			if (mddev2->curr_resync && 
@@ -4007,3 +4008,4 @@
 EXPORT_SYMBOL(md_print_devices);
 EXPORT_SYMBOL(md_check_recovery);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("md");
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d3a64a0..51d9645 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -893,7 +893,6 @@
 	if (!uptodate) {
 		md_error(r1_bio->mddev,
 			 conf->mirrors[r1_bio->read_disk].rdev);
-		set_bit(R1BIO_Degraded, &r1_bio->state);
 	} else
 		set_bit(R1BIO_Uptodate, &r1_bio->state);
 	rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev);
@@ -918,10 +917,9 @@
 			mirror = i;
 			break;
 		}
-	if (!uptodate) {
+	if (!uptodate)
 		md_error(mddev, conf->mirrors[mirror].rdev);
-		set_bit(R1BIO_Degraded, &r1_bio->state);
-	}
+
 	update_head_pos(mirror, r1_bio);
 
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
@@ -1109,6 +1107,7 @@
 	int i;
 	int write_targets = 0;
 	int sync_blocks;
+	int still_degraded = 0;
 
 	if (!conf->r1buf_pool)
 	{
@@ -1137,7 +1136,10 @@
 		return 0;
 	}
 
-	if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, mddev->degraded) &&
+	/* before building a request, check if we can skip these blocks..
+	 * This call the bitmap_start_sync doesn't actually record anything
+	 */
+	if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) &&
 	    !conf->fullsync) {
 		/* We can skip this block, and probably several more */
 		*skipped = 1;
@@ -1203,24 +1205,23 @@
 		if (i == disk) {
 			bio->bi_rw = READ;
 			bio->bi_end_io = end_sync_read;
-		} else if (conf->mirrors[i].rdev &&
-			   !conf->mirrors[i].rdev->faulty &&
-			   (!conf->mirrors[i].rdev->in_sync ||
-			    sector_nr + RESYNC_SECTORS > mddev->recovery_cp)) {
+		} else if (conf->mirrors[i].rdev == NULL ||
+			   conf->mirrors[i].rdev->faulty) {
+			still_degraded = 1;
+			continue;
+		} else if (!conf->mirrors[i].rdev->in_sync ||
+			   sector_nr + RESYNC_SECTORS > mddev->recovery_cp) {
 			bio->bi_rw = WRITE;
 			bio->bi_end_io = end_sync_write;
 			write_targets ++;
 		} else
+			/* no need to read or write here */
 			continue;
 		bio->bi_sector = sector_nr + conf->mirrors[i].rdev->data_offset;
 		bio->bi_bdev = conf->mirrors[i].rdev->bdev;
 		bio->bi_private = r1_bio;
 	}
 
-	if (write_targets + 1 < conf->raid_disks)
-		/* array degraded, can't clear bitmap */
-		set_bit(R1BIO_Degraded, &r1_bio->state);
-
 	if (write_targets == 0) {
 		/* There is nowhere to write, so all non-sync
 		 * drives must be failed - so we are finished
@@ -1243,7 +1244,7 @@
 			break;
 		if (sync_blocks == 0) {
 			if (!bitmap_start_sync(mddev->bitmap, sector_nr,
-					&sync_blocks, mddev->degraded) &&
+					&sync_blocks, still_degraded) &&
 					!conf->fullsync)
 				break;
 			if (sync_blocks < (PAGE_SIZE>>9))
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 4698d5f..43f231a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1653,6 +1653,7 @@
 
 	/* device size must be a multiple of chunk size */
 	mddev->size &= ~(mddev->chunk_size/1024 -1);
+	mddev->resync_max_sectors = mddev->size << 1;
 
 	if (!conf->chunk_size || conf->chunk_size % 4) {
 		printk(KERN_ERR "raid5: invalid chunk size %d for %s\n",
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index f5ee168..495dee1 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -1813,6 +1813,7 @@
 
 	/* device size must be a multiple of chunk size */
 	mddev->size &= ~(mddev->chunk_size/1024 -1);
+	mddev->resync_max_sectors = mddev->size << 1;
 
 	if (conf->raid_disks < 4) {
 		printk(KERN_ERR "raid6: not enough configured devices for %s (%d, minimum 4)\n",
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c
index 6c52fd0..a97b9b9 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bttv-cards.c
@@ -95,7 +95,7 @@
 static unsigned int triton1=0;
 static unsigned int vsfx=0;
 static unsigned int latency = UNSET;
-static unsigned int no_overlay=-1;
+int no_overlay=-1;
 
 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
@@ -4296,9 +4296,11 @@
 		printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
 	if (pcipci_fail) {
 		printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
-		if (UNSET == no_overlay) {
-			printk(KERN_WARNING "bttv: going to disable overlay.\n");
+		if (!no_overlay) {
+			printk(KERN_WARNING "bttv: overlay will be disabled.\n");
 			no_overlay = 1;
+		} else {
+			printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
 		}
 	}
 	if (UNSET != latency)
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index 51a0f6d..eee9322 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -1,5 +1,5 @@
 /*
-    $Id: bttv-driver.c,v 1.42 2005/07/05 17:37:35 nsh Exp $
+    $Id: bttv-driver.c,v 1.52 2005/08/04 00:55:16 mchehab Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -80,6 +80,7 @@
 static unsigned int uv_ratio    = 50;
 static unsigned int full_luma_range = 0;
 static unsigned int coring      = 0;
+extern int no_overlay;
 
 /* API features (turn on/off stuff for testing) */
 static unsigned int v4l2        = 1;
@@ -2151,6 +2152,10 @@
 		return 0;
 	}
 	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		if (no_overlay > 0) {
+			printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
+			return -EINVAL;
+		}
 		return setup_window(fh, btv, &f->fmt.win, 1);
 	case V4L2_BUF_TYPE_VBI_CAPTURE:
 		retval = bttv_switch_type(fh,f->type);
@@ -2224,9 +2229,11 @@
 			/* others */
 			cap->type = VID_TYPE_CAPTURE|
 				VID_TYPE_TUNER|
-				VID_TYPE_OVERLAY|
 				VID_TYPE_CLIPPING|
 				VID_TYPE_SCALES;
+			if (no_overlay <= 0)
+				cap->type |= VID_TYPE_OVERLAY;
+
 			cap->maxwidth  = bttv_tvnorms[btv->tvnorm].swidth;
 			cap->maxheight = bttv_tvnorms[btv->tvnorm].sheight;
 			cap->minwidth  = 48;
@@ -2302,6 +2309,11 @@
 		struct video_window *win = arg;
 		struct v4l2_window w2;
 
+		if (no_overlay > 0) {
+			printk ("VIDIOCSWIN: no_overlay\n");
+			return -EINVAL;
+		}
+
 		w2.field = V4L2_FIELD_ANY;
 		w2.w.left    = win->x;
 		w2.w.top     = win->y;
@@ -2577,10 +2589,12 @@
 		cap->version = BTTV_VERSION_CODE;
 		cap->capabilities =
 			V4L2_CAP_VIDEO_CAPTURE |
-			V4L2_CAP_VIDEO_OVERLAY |
 			V4L2_CAP_VBI_CAPTURE |
 			V4L2_CAP_READWRITE |
 			V4L2_CAP_STREAMING;
+		if (no_overlay <= 0)
+			cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY;
+
 		if (bttv_tvcards[btv->c.type].tuner != UNSET &&
 		    bttv_tvcards[btv->c.type].tuner != TUNER_ABSENT)
 			cap->capabilities |= V4L2_CAP_TUNER;
@@ -3076,7 +3090,7 @@
 static struct video_device bttv_video_template =
 {
 	.name     = "UNSET",
-	.type     = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY|
+	.type     = VID_TYPE_CAPTURE|VID_TYPE_TUNER|
 	            VID_TYPE_CLIPPING|VID_TYPE_SCALES,
 	.hardware = VID_HARDWARE_BT848,
 	.fops     = &bttv_fops,
@@ -3756,6 +3770,12 @@
 /* register video4linux devices */
 static int __devinit bttv_register_video(struct bttv *btv)
 {
+	if (no_overlay <= 0) {
+		bttv_video_template.type |= VID_TYPE_OVERLAY;
+	} else {
+		printk("bttv: Overlay support disabled.\n");
+	}
+
 	/* video */
 	btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
         if (NULL == btv->video_dev)
@@ -3869,11 +3889,6 @@
         pci_set_master(dev);
 	pci_set_command(dev);
 	pci_set_drvdata(dev,btv);
-	if (!pci_dma_supported(dev,0xffffffff)) {
-		printk("bttv%d: Oops: no 32bit PCI DMA ???\n", btv->c.nr);
-		result = -EIO;
-		goto fail1;
-	}
 
         pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision);
         pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h
index 191eaf1..f2af9e1 100644
--- a/drivers/media/video/bttv.h
+++ b/drivers/media/video/bttv.h
@@ -1,5 +1,5 @@
 /*
- * $Id: bttv.h,v 1.18 2005/05/24 23:41:42 nsh Exp $
+ * $Id: bttv.h,v 1.22 2005/07/28 18:41:21 mchehab Exp $
  *
  *  bttv - Bt848 frame grabber driver
  *
@@ -135,7 +135,9 @@
 #define BTTV_DVICO_DVBT_LITE  0x80
 #define BTTV_TIBET_CS16  0x83
 #define BTTV_KODICOM_4400R  0x84
-#define BTTV_ADLINK_RTV24   0x85
+#define BTTV_ADLINK_RTV24   0x86
+#define BTTV_DVICO_FUSIONHDTV_5_LITE 0x87
+#define BTTV_ACORP_Y878F   0x88
 
 /* i2c address list */
 #define I2C_TSA5522        0xc2
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index f3293e4..aab094b 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -1,5 +1,5 @@
 /*
-    $Id: bttvp.h,v 1.19 2005/06/16 21:38:45 nsh Exp $
+    $Id: bttvp.h,v 1.21 2005/07/15 21:44:14 mchehab Exp $
 
     bttv - Bt848 frame grabber driver
 
@@ -27,7 +27,7 @@
 #define _BTTVP_H_
 
 #include <linux/version.h>
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,15)
+#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,16)
 
 #include <linux/types.h>
 #include <linux/wait.h>
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 3d0c784..ebf02a7 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-cards.c,v 1.86 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: cx88-cards.c,v 1.90 2005/07/28 02:47:42 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * card-specific stuff.
@@ -90,6 +90,9 @@
 		.input          = {{
 			.type   = CX88_VMUX_TELEVISION,
 			.vmux   = 0,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
 		}},
 	},
 	[CX88_BOARD_PIXELVIEW] = {
@@ -496,6 +499,9 @@
 		.input          = {{
                         .type   = CX88_VMUX_DVB,
                         .vmux   = 0,
+		},{
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
                 }},
 		.dvb            = 1,
 	},
@@ -753,6 +759,27 @@
 		}},
 		.dvb            = 1,
 	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = {
+		.name           = "DViCO FusionHDTV 5 Gold",
+		.tuner_type     = TUNER_LG_TDVS_H062F,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		/*  See DViCO FusionHDTV 3 Gold-Q for GPIO documentation.  */
+		.input          = {{
+                        .type   = CX88_VMUX_TELEVISION,
+                        .vmux   = 0,
+                        .gpio0  = 0x0f0d,
+                },{
+                        .type   = CX88_VMUX_COMPOSITE1,
+                        .vmux   = 1,
+                        .gpio0  = 0x0f00,
+                },{
+                        .type   = CX88_VMUX_SVIDEO,
+                        .vmux   = 2,
+                        .gpio0  = 0x0f00,
+                }},
+	},
 };
 const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
 
@@ -880,6 +907,10 @@
 		.subvendor = 0x153b,
 		.subdevice = 0x1166,
 		.card      = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1,
+ 	},{
+		.subvendor = 0x18ac,
+		.subdevice = 0xd500,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD,
 	},
 };
 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 5588a3a..5f58c10 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88-video.c,v 1.80 2005/07/13 08:49:08 mchehab Exp $
+ * $Id: cx88-video.c,v 1.82 2005/07/22 05:13:34 mkrufky Exp $
  *
  * device driver for Conexant 2388x based TV cards
  * video4linux video interface
@@ -758,10 +758,10 @@
 		struct cx88_core *core = dev->core;
 		int board = core->board;
 		dprintk(1,"video_open: setting radio device\n");
+		cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
 		cx_write(MO_GP0_IO, cx88_boards[board].radio.gpio0);
 		cx_write(MO_GP1_IO, cx88_boards[board].radio.gpio1);
 		cx_write(MO_GP2_IO, cx88_boards[board].radio.gpio2);
-		cx_write(MO_GP3_IO, cx88_boards[board].radio.gpio3);
 		dev->core->tvaudio = WW_FM;
 		cx88_set_tvaudio(core);
 		cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1);
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index b008f7d..da65dc9 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -1,5 +1,5 @@
 /*
- * $Id: cx88.h,v 1.69 2005/07/13 17:25:25 mchehab Exp $
+ * $Id: cx88.h,v 1.70 2005/07/24 17:44:09 mkrufky Exp $
  *
  * v4l2 device driver for cx2388x based TV cards
  *
@@ -171,6 +171,7 @@
 #define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T  28
 #define CX88_BOARD_ADSTECH_DVB_T_PCI          29
 #define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1  30
+#define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
index 6239254..62f1b8d 100644
--- a/drivers/media/video/msp3400.c
+++ b/drivers/media/video/msp3400.c
@@ -741,11 +741,9 @@
 			schedule_timeout(msecs_to_jiffies(timeout));
 		}
 	}
-	if (current->flags & PF_FREEZE) {
-		refrigerator ();
-	}
 
 	remove_wait_queue(&msp->wq, &wait);
+	try_to_freeze();
 	return msp->restart;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c
index 93dd619..1203b93 100644
--- a/drivers/media/video/saa7134/saa7134-i2c.c
+++ b/drivers/media/video/saa7134/saa7134-i2c.c
@@ -1,5 +1,5 @@
 /*
- * $Id: saa7134-i2c.c,v 1.19 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: saa7134-i2c.c,v 1.22 2005/07/22 04:09:41 mkrufky Exp $
  *
  * device driver for philips saa7134 based TV cards
  * i2c interface support
@@ -300,6 +300,8 @@
   	status = i2c_get_status(dev);
 	if (i2c_is_error(status))
 		goto err;
+	/* ensure that the bus is idle for at least one bit slot */
+	msleep(1);
 
 	d1printk("\n");
 	return num;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 6836c07..2af0cb2 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -1,5 +1,5 @@
 /*
- * $Id: saa7134.h,v 1.48 2005/07/01 08:22:24 nsh Exp $
+ * $Id: saa7134.h,v 1.49 2005/07/13 17:25:25 mchehab Exp $
  *
  * v4l2 device driver for philips saa7134 based TV cards
  *
@@ -21,7 +21,7 @@
  */
 
 #include <linux/version.h>
-#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,13)
+#define SAA7134_VERSION_CODE KERNEL_VERSION(0,2,14)
 
 #include <linux/pci.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
index 4d27ac1..cebcc1f 100644
--- a/drivers/media/video/tea5767.c
+++ b/drivers/media/video/tea5767.c
@@ -2,7 +2,7 @@
  * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
  * I2C address is allways 0xC0.
  *
- * $Id: tea5767.c,v 1.21 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tea5767.c,v 1.27 2005/07/31 12:10:56 mchehab Exp $
  *
  * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
  * This code is placed under the terms of the GNU General Public License
@@ -15,7 +15,6 @@
 #include <linux/videodev.h>
 #include <linux/delay.h>
 #include <media/tuner.h>
-#include <media/tuner.h>
 
 #define PREFIX "TEA5767 "
 
@@ -293,16 +292,16 @@
 
 int tea5767_autodetection(struct i2c_client *c)
 {
-	unsigned char buffer[5] = { 0xff, 0xff, 0xff, 0xff, 0xff };
+	unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	int rc;
 	struct tuner *t = i2c_get_clientdata(c);
 
-	if (5 != (rc = i2c_master_recv(c, buffer, 5))) {
+	if (7 != (rc = i2c_master_recv(c, buffer, 7))) {
 		tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc);
 		return EINVAL;
 	}
 
-	/* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
+	/* If all bytes are the same then it's a TV tuner and not a tea5767 */
 	if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
 	    buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
 		tuner_warn("All bytes are equal. It is not a TEA5767\n");
@@ -318,6 +317,17 @@
 		tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
 		return EINVAL;
 	}
+	/* It seems that tea5767 returns 0xff after the 5th byte */
+	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+		tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+		return EINVAL;
+	}
+
+	/* It seems that tea5767 returns 0xff after the 5th byte */
+	if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
+		tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
+		return EINVAL;
+	}
 
 	tuner_warn("TEA5767 detected.\n");
 	return 0;
@@ -327,10 +337,8 @@
 {
 	struct tuner *t = i2c_get_clientdata(c);
 
-	if (tea5767_autodetection(c) == EINVAL)
-		return EINVAL;
-
-	tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
+	tuner_info("type set to %d (%s)\n", t->type,
+			"Philips TEA5767HN FM Radio");
 	strlcpy(c->name, "tea5767", sizeof(c->name));
 
 	t->tv_freq = set_tv_freq;
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index b25a9c0..f0a5798 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-core.c,v 1.58 2005/07/14 03:06:43 mchehab Exp $
+ * $Id: tuner-core.c,v 1.63 2005/07/28 18:19:55 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * core core, i.e. kernel interfaces, registering and so on
@@ -23,6 +23,8 @@
 #include <media/tuner.h>
 #include <media/audiochip.h>
 
+#include "msp3400.h"
+
 #define UNSET (-1U)
 
 /* standard i2c insmod options */
@@ -42,6 +44,9 @@
 static unsigned int no_autodetect = 0;
 module_param(no_autodetect, int, 0444);
 
+static unsigned int show_i2c = 0;
+module_param(show_i2c, int, 0444);
+
 /* insmod options used at runtime => read/write */
 unsigned int tuner_debug = 0;
 module_param(tuner_debug, int, 0644);
@@ -320,6 +325,17 @@
 
 	tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name);
 
+	if (show_i2c) {
+		unsigned char buffer[16];
+		int i,rc;
+
+		memset(buffer, 0, sizeof(buffer));
+		rc = i2c_master_recv(&t->i2c, buffer, sizeof(buffer));
+		printk("tuner-%04x I2C RECV = ",addr);
+		for (i=0;i<rc;i++)
+			printk("%02x ",buffer[i]);
+		printk("\n");
+	}
 	/* TEA5767 autodetection code - only for addr = 0xc0 */
 	if (!no_autodetect) {
 		if (addr == 0x60) {
@@ -451,6 +467,17 @@
 			break;
 		}
 		break;
+	case VIDIOCSAUDIO:
+		if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+			return 0;
+		if (check_v4l2(t) == EINVAL)
+			return 0;
+
+		/* Should be implemented, since bttv calls it */
+		tuner_dbg("VIDIOCSAUDIO not implemented.\n");
+
+		break;
+	case MSP_SET_MATRIX:
 	case TDA9887_SET_CONFIG:
 		break;
 	/* --- v4l ioctls --- */
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index a3f8e83..de0c93a 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -1,5 +1,5 @@
 /*
- * $Id: tuner-simple.c,v 1.39 2005/07/07 01:49:30 mkrufky Exp $
+ * $Id: tuner-simple.c,v 1.43 2005/07/28 18:41:21 mchehab Exp $
  *
  * i2c tv tuner chip device driver
  * controls all those simple 4-control-bytes style tuners.
@@ -245,6 +245,12 @@
           /* see tea5767.c for details */},
 	{ "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
 	  16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
+
+	{ "LG TDVS-H062F/TUA6034", LGINNOTEK, NTSC,
+	  16*160.00,16*455.00,0x01,0x02,0x04,0x8e,732},
+
+	{ "Ymec TVF66T5-B/DFF", Philips, PAL,
+          16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623},
 };
 
 unsigned const int tuner_count = ARRAY_SIZE(tuners);
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 62b03ef..127ec38 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -189,7 +189,7 @@
 	{ TUNER_ABSENT,        "Philips FQ1236 MK3"},
 	{ TUNER_ABSENT,        "Samsung TCPN 2121P30A"},
 	{ TUNER_ABSENT,        "Samsung TCPE 4121P30A"},
-	{ TUNER_ABSENT,        "TCL MFPE05 2"},
+	{ TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"},
 	/* 90-99 */
 	{ TUNER_ABSENT,        "LG TALN H202T"},
 	{ TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"},
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index b96d6fb..b780307 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -417,6 +417,7 @@
 	struct net_local *lp = netdev_priv(dev);
 	static unsigned version_printed;
 	int i;
+	int tmp;
 	unsigned rev_type = 0;
 	int eeprom_buff[CHKSUM_LEN];
 	int retval;
@@ -492,14 +493,17 @@
 				goto out2;
 			}
 	}
-printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+	printk(KERN_DEBUG "PP_addr at %x: 0x%x\n",
+			ioaddr + ADD_PORT, inw(ioaddr + ADD_PORT));
 
 	ioaddr &= ~3;
 	outw(PP_ChipID, ioaddr + ADD_PORT);
 
-	if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
-		printk(KERN_ERR "%s: incorrect signature 0x%x\n",
-			dev->name, inw(ioaddr + DATA_PORT));
+	tmp = inw(ioaddr + DATA_PORT);
+	if (tmp != CHIP_EISA_ID_SIG) {
+		printk(KERN_DEBUG "%s: incorrect signature at %x: 0x%x!="
+			CHIP_EISA_ID_SIG_STR "\n",
+			dev->name, ioaddr + DATA_PORT, tmp);
   		retval = -ENODEV;
   		goto out2;
 	}
@@ -1450,6 +1454,7 @@
 	/* Write the contents of the packet */
 	outsw(dev->base_addr + TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
 	spin_unlock_irq(&lp->lock);
+	lp->stats.tx_bytes += skb->len;
 	dev->trans_start = jiffies;
 	dev_kfree_skb (skb);
 
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index bd3ad8e..decea26 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -93,6 +93,7 @@
 #endif
 
 #define CHIP_EISA_ID_SIG 0x630E   /*  Product ID Code for Crystal Chip (CS8900 spec 4.3) */
+#define CHIP_EISA_ID_SIG_STR "0x630E"
 
 #ifdef IBMEIPKT
 #define EISA_ID_SIG 0x4D24	/*  IBM */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cb7f051..5e5d2c3 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -162,7 +162,6 @@
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 
-static int e1000_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
 static int e1000_suspend(struct pci_dev *pdev, uint32_t state);
 #ifdef CONFIG_PM
 static int e1000_resume(struct pci_dev *pdev);
@@ -173,12 +172,6 @@
 static void e1000_netpoll (struct net_device *netdev);
 #endif
 
-struct notifier_block e1000_notifier_reboot = {
-	.notifier_call	= e1000_notify_reboot,
-	.next		= NULL,
-	.priority	= 0
-};
-
 /* Exported from other modules */
 
 extern void e1000_check_options(struct e1000_adapter *adapter);
@@ -221,9 +214,7 @@
 	printk(KERN_INFO "%s\n", e1000_copyright);
 
 	ret = pci_module_init(&e1000_driver);
-	if(ret >= 0) {
-		register_reboot_notifier(&e1000_notifier_reboot);
-	}
+
 	return ret;
 }
 
@@ -239,7 +230,6 @@
 static void __exit
 e1000_exit_module(void)
 {
-	unregister_reboot_notifier(&e1000_notifier_reboot);
 	pci_unregister_driver(&e1000_driver);
 }
 
@@ -3652,23 +3642,6 @@
 }
 
 static int
-e1000_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
-{
-	struct pci_dev *pdev = NULL;
-
-	switch(event) {
-	case SYS_DOWN:
-	case SYS_HALT:
-	case SYS_POWER_OFF:
-		while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-			if(pci_dev_driver(pdev) == &e1000_driver)
-				e1000_suspend(pdev, 3);
-		}
-	}
-	return NOTIFY_DONE;
-}
-
-static int
 e1000_suspend(struct pci_dev *pdev, uint32_t state)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 7cdebe1..0cd5430 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -17,7 +17,7 @@
 
 config 6PACK
 	tristate "Serial port 6PACK driver"
-	depends on AX25 && BROKEN_ON_SMP
+	depends on AX25
 	---help---
 	  6pack is a transmission protocol for the data exchange between your
 	  PC and your TNC (the Terminal Node Controller acts as a kind of
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index dbb9410..980d7e5 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1671,7 +1671,7 @@
 
 static struct pcmcia_device_id nmclan_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
-	PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet", 0x0ebf1d60, 0x00b2e941),
+	PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index e1664ae..9f22d138 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1639,7 +1639,7 @@
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
@@ -1683,7 +1683,6 @@
 	PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
 	PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
-	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM", 0xbb7fbdd7, 0x5ba10d49),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
   	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
@@ -1719,6 +1718,7 @@
 	PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
 	PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
 	PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
+	PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
 	PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
 	PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
 	PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
@@ -1737,6 +1737,7 @@
 	PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
 	PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
 	PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
+	PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
 	PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
 	PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
@@ -1753,7 +1754,7 @@
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
-	PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline ", 0x0733cc81, 0x5e07cfa0),
+	PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
 	PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
 	PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
 	PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 0d8bb4c..d652e1ed 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -2332,8 +2332,8 @@
 	PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
 	PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
 	PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
@@ -2343,8 +2343,8 @@
 	PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
 	PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
 	PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
-	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
+	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
 	PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 9f33bad..ce143f0 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1985,7 +1985,7 @@
 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
 	PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
 	PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 82570ec..6ee4771 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5133,6 +5133,84 @@
 	kfree(pAC);
 }
 
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+
+	if (netif_running(dev)) {
+		netif_carrier_off(dev);
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
+		netif_device_detach(dev);
+	}
+	if (otherdev != dev) {
+		if (netif_running(otherdev)) {
+			netif_carrier_off(otherdev);
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvDeInitAdapter(pAC, 1);  /* performs SkGeClose */
+			netif_device_detach(otherdev);
+		}
+	}
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+		free_irq(dev->irq, dev);
+	}
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	DEV_NET *pNet = netdev_priv(dev);
+	SK_AC *pAC = pNet->pAC;
+	struct net_device *otherdev = pAC->dev[1];
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_device(pdev);
+	pci_set_master(pdev);
+	if (pAC->GIni.GIMacsFound == 2)
+		ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+	else
+		ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+	if (ret) {
+		printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+		pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+		dev->irq = 0;
+		pci_disable_device(pdev);
+		return -EBUSY;
+	}
+
+	netif_device_attach(dev);
+	if (netif_running(dev)) {
+		DoPrintInterfaceChange = SK_FALSE;
+		SkDrvInitAdapter(pAC, 0);    /* first device  */
+	}
+	if (otherdev != dev) {
+		netif_device_attach(otherdev);
+		if (netif_running(otherdev)) {
+			DoPrintInterfaceChange = SK_FALSE;
+			SkDrvInitAdapter(pAC, 1);    /* second device  */
+		}
+	}
+
+	return 0;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
 static struct pci_device_id skge_pci_tbl[] = {
 	{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -5158,6 +5236,8 @@
 	.id_table	= skge_pci_tbl,
 	.probe		= skge_probe_one,
 	.remove		= __devexit_p(skge_remove_one),
+	.suspend	= skge_suspend,
+	.resume		= skge_resume,
 };
 
 static int __init skge_init(void)
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index df44834..6cb49dd 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -2016,7 +2016,7 @@
 	 * we set the PHY to coma mode and switch to D3 power state.
 	 */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* for all ports switch PHY to coma mode */
 		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index 94a09de..42d2d96 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -1065,7 +1065,7 @@
 	
 	/* WA code for COMA mode */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 		
 		SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -1110,7 +1110,7 @@
 
 	/* WA code for COMA mode */
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 		
 		SK_IN32(IoC, B2_GP_IO, &DWord);
 
@@ -2126,7 +2126,7 @@
 	int		Ret = 0;
 
 	if (pAC->GIni.GIYukonLite &&
-	    pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+	    pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* save current power mode */
 		LastMode = pAC->GIni.GP[Port].PPhyPowerState;
@@ -2253,7 +2253,7 @@
 	int		Ret = 0;
 
 	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
 
 		/* save current power mode */
 		LastMode = pAC->GIni.GP[Port].PPhyPowerState;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 5cacc7a..f157394 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"0.7"
+#define DRV_VERSION		"0.8"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -55,7 +55,7 @@
 #define ETH_JUMBO_MTU		9000
 #define TX_WATCHDOG		(5 * HZ)
 #define NAPI_WEIGHT		64
-#define BLINK_HZ		(HZ/4)
+#define BLINK_MS		250
 
 MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
 MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@@ -75,7 +75,6 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx  */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
@@ -249,7 +248,7 @@
 	} else {
 		u32 setting;
 
-		switch(ecmd->speed) {
+		switch (ecmd->speed) {
 		case SPEED_1000:
 			if (ecmd->duplex == DUPLEX_FULL)
 				setting = SUPPORTED_1000baseT_Full;
@@ -620,84 +619,98 @@
 	return 0;
 }
 
-static void skge_led_on(struct skge_hw *hw, int port)
+enum led_mode { LED_MODE_OFF, LED_MODE_ON, LED_MODE_TST };
+static void skge_led(struct skge_port *skge, enum led_mode mode)
 {
-	if (hw->chip_id == CHIP_ID_GENESIS) {
-		skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-		skge_write8(hw, B0_LED, LED_STAT_ON);
-
-		skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
-		skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
-
-		/* For Broadcom Phy only */
-		xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
-	} else {
-		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-				  PHY_M_LED_MO_DUP(MO_LED_ON)  |
-				  PHY_M_LED_MO_10(MO_LED_ON)   |
-				  PHY_M_LED_MO_100(MO_LED_ON)  |
-				  PHY_M_LED_MO_1000(MO_LED_ON) |
-				  PHY_M_LED_MO_RX(MO_LED_ON));
-	}
-}
-
-static void skge_led_off(struct skge_hw *hw, int port)
-{
-	if (hw->chip_id == CHIP_ID_GENESIS) {
-		skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
-		skge_write8(hw, B0_LED, LED_STAT_OFF);
-
-		skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
-
-		/* Broadcom only */
-		xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
-	} else {
-		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER,
-				  PHY_M_LED_MO_DUP(MO_LED_OFF)  |
-				  PHY_M_LED_MO_10(MO_LED_OFF)   |
-				  PHY_M_LED_MO_100(MO_LED_OFF)  |
-				  PHY_M_LED_MO_1000(MO_LED_OFF) |
-				  PHY_M_LED_MO_RX(MO_LED_OFF));
-	}
-}
-
-static void skge_blink_timer(unsigned long data)
-{
-	struct skge_port *skge = (struct skge_port *) data;
 	struct skge_hw *hw = skge->hw;
-	unsigned long flags;
+	int port = skge->port;
 
-	spin_lock_irqsave(&hw->phy_lock, flags);
-	if (skge->blink_on)
-		skge_led_on(hw, skge->port);
-	else
-		skge_led_off(hw, skge->port);
-	spin_unlock_irqrestore(&hw->phy_lock, flags);
+	spin_lock_bh(&hw->phy_lock);
+	if (hw->chip_id == CHIP_ID_GENESIS) {
+		switch (mode) {
+		case LED_MODE_OFF:
+			xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+			skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+			break;
 
-	skge->blink_on = !skge->blink_on;
-	mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
+		case LED_MODE_ON:
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
+			skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
+
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+			skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
+
+			break;
+
+		case LED_MODE_TST:
+			skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
+			skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
+			skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+
+			xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
+			break;
+		}
+	} else {
+		switch (mode) {
+		case LED_MODE_OFF:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_DUP(MO_LED_OFF)  |
+				     PHY_M_LED_MO_10(MO_LED_OFF)   |
+				     PHY_M_LED_MO_100(MO_LED_OFF)  |
+				     PHY_M_LED_MO_1000(MO_LED_OFF) |
+				     PHY_M_LED_MO_RX(MO_LED_OFF));
+			break;
+		case LED_MODE_ON:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL,
+				     PHY_M_LED_PULS_DUR(PULS_170MS) |
+				     PHY_M_LED_BLINK_RT(BLINK_84MS) |
+				     PHY_M_LEDC_TX_CTRL |
+				     PHY_M_LEDC_DP_CTRL);
+		
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_RX(MO_LED_OFF) |
+				     (skge->speed == SPEED_100 ?
+				      PHY_M_LED_MO_100(MO_LED_ON) : 0));
+			break;
+		case LED_MODE_TST:
+			gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+				     PHY_M_LED_MO_DUP(MO_LED_ON)  |
+				     PHY_M_LED_MO_10(MO_LED_ON)   |
+				     PHY_M_LED_MO_100(MO_LED_ON)  |
+				     PHY_M_LED_MO_1000(MO_LED_ON) |
+				     PHY_M_LED_MO_RX(MO_LED_ON));
+		}
+	}
+	spin_unlock_bh(&hw->phy_lock);
 }
 
 /* blink LED's for finding board */
 static int skge_phys_id(struct net_device *dev, u32 data)
 {
 	struct skge_port *skge = netdev_priv(dev);
+	unsigned long ms;
+	enum led_mode mode = LED_MODE_TST;
 
 	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+		ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
+	else
+		ms = data * 1000;
 
-	/* start blinking */
-	skge->blink_on = 1;
-	mod_timer(&skge->led_blink, jiffies+1);
+	while (ms > 0) {
+		skge_led(skge, mode);
+		mode ^= LED_MODE_TST;
 
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&skge->led_blink);
+		if (msleep_interruptible(BLINK_MS))
+			break;
+		ms -= BLINK_MS;
+	}
 
-	skge_led_off(skge->hw, skge->port);
+	/* back to regular LED state */
+	skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
 
 	return 0;
 }
@@ -1028,7 +1041,7 @@
 			}
 
 			/* Check Duplex mismatch */
-			switch(aux & PHY_B_AS_AN_RES_MSK) {
+			switch (aux & PHY_B_AS_AN_RES_MSK) {
 			case PHY_B_RES_1000FD:
 				skge->duplex = DUPLEX_FULL;
 				break;
@@ -1099,7 +1112,7 @@
 	r |=  XM_MMU_NO_PRE;
 	xm_write16(hw, port, XM_MMU_CMD,r);
 
-	switch(id1) {
+	switch (id1) {
 	case PHY_BCOM_ID1_C0:
 		/*
 		 * Workaround BCOM Errata for the C0 type.
@@ -1194,13 +1207,6 @@
 	xm_write16(hw, port, XM_STAT_CMD,
 			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
 
-	/* initialize Rx, Tx and Link LED */
-	skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
-	skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
-
-	skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
-	skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
-
 	/* Unreset the XMAC. */
 	skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
 
@@ -1209,7 +1215,6 @@
 	 * namely for the 1000baseTX cards that use the XMAC's
 	 * GMII mode.
 	 */
-	spin_lock_bh(&hw->phy_lock);
 	/* Take external Phy out of reset */
 	r = skge_read32(hw, B2_GP_IO);
 	if (port == 0)
@@ -1219,7 +1224,6 @@
 
 	skge_write32(hw, B2_GP_IO, r);
 	skge_read32(hw, B2_GP_IO);
-	spin_unlock_bh(&hw->phy_lock);
 
 	/* Enable GMII interfac */
 	xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1569,7 +1573,6 @@
 {
 	struct skge_port *skge = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv;
-	u16 ledctrl, ledover;
 
 	pr_debug("yukon_init\n");
 	if (skge->autoneg == AUTONEG_ENABLE) {
@@ -1641,32 +1644,11 @@
 	gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
 	gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
 
-	/* Setup Phy LED's */
-	ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
-	ledover = 0;
-
-	ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
-	/* turn off the Rx LED (LED_RX) */
-	ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
-
-	/* disable blink mode (LED_DUPLEX) on collisions */
-	ctrl |= PHY_M_LEDC_DP_CTRL;
-	gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-
-	if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
-		/* turn on 100 Mbps LED (LED_LINK100) */
-		ledover |= PHY_M_LED_MO_100(MO_LED_ON);
-	}
-
-	if (ledover)
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
-
 	/* Enable phy interrupt on autonegotiation complete (or link up) */
 	if (skge->autoneg == AUTONEG_ENABLE)
-		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_MSK);
 	else
-		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 }
 
 static void yukon_reset(struct skge_hw *hw, int port)
@@ -1691,7 +1673,7 @@
 
 	/* WA code for COMA mode -- set PHY reset */
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		skge_write32(hw, B2_GP_IO,
 			     (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
 
@@ -1701,7 +1683,7 @@
 
 	/* WA code for COMA mode -- clear PHY reset */
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		skge_write32(hw, B2_GP_IO,
 			     (skge_read32(hw, B2_GP_IO) | GP_DIR_9)
 			     & ~GP_IO_9);
@@ -1745,9 +1727,7 @@
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 	skge_read16(hw, GMAC_IRQ_SRC);
 
-	spin_lock_bh(&hw->phy_lock);
 	yukon_init(hw, port);
-	spin_unlock_bh(&hw->phy_lock);
 
 	/* MIB clear */
 	reg = gma_read16(hw, port, GM_PHY_ADDR);
@@ -1796,7 +1776,7 @@
 	skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
 	reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3)
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3)
 		reg &= ~GMF_RX_F_FL_ON;
 	skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
 	skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
@@ -1813,19 +1793,19 @@
 	int port = skge->port;
 
 	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
-	    hw->chip_rev == CHIP_REV_YU_LITE_A3) {
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
 		skge_write32(hw, B2_GP_IO,
 			     skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
 	}
 
 	gma_write16(hw, port, GM_GP_CTRL,
 			 gma_read16(hw, port, GM_GP_CTRL)
-			 & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
+			 & ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA));
 	gma_read16(hw, port, GM_GP_CTRL);
 
 	/* set GPHY Control reset */
-	gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
-	gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+	skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+	skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 }
 
 static void yukon_get_stats(struct skge_port *skge, u64 *data)
@@ -1856,11 +1836,12 @@
 
 	if (status & GM_IS_RX_FF_OR) {
 		++skge->net_stats.rx_fifo_errors;
-		gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+		skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
 	}
+
 	if (status & GM_IS_TX_FF_UR) {
 		++skge->net_stats.tx_fifo_errors;
-		gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+		skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
 	}
 
 }
@@ -1896,7 +1877,7 @@
 	reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 
-	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
 	skge_link_up(skge);
 }
 
@@ -1904,12 +1885,14 @@
 {
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
+	u16 ctrl;
 
 	pr_debug("yukon_link_down\n");
 	gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
-	gm_phy_write(hw, port, GM_GP_CTRL,
-			  gm_phy_read(hw, port, GM_GP_CTRL)
-			  & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+	ctrl = gma_read16(hw, port, GM_GP_CTRL);
+	ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+	gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
 	if (skge->flow_control == FLOW_MODE_REM_SEND) {
 		/* restore Asymmetric Pause bit */
@@ -2097,10 +2080,12 @@
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
 
 	/* Initialze MAC */
+	spin_lock_bh(&hw->phy_lock);
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		genesis_mac_init(hw, port);
 	else
 		yukon_mac_init(hw, port);
+	spin_unlock_bh(&hw->phy_lock);
 
 	/* Configure RAMbuffers */
 	chunk = hw->ram_size / ((hw->ports + 1)*2);
@@ -2116,6 +2101,7 @@
 	/* Start receiver BMU */
 	wmb();
 	skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+	skge_led(skge, LED_MODE_ON);
 
 	pr_debug("skge_up completed\n");
 	return 0;
@@ -2140,8 +2126,6 @@
 
 	netif_stop_queue(dev);
 
-	del_timer_sync(&skge->led_blink);
-
 	/* Stop transmitter */
 	skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
 	skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
@@ -2175,15 +2159,12 @@
 	if (hw->chip_id == CHIP_ID_GENESIS) {
 		skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
 		skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
-		skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
-		skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
 	} else {
 		skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 		skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 	}
 
-	/* turn off led's */
-	skge_write16(hw, B0_LED, LED_STAT_OFF);
+	skge_led(skge, LED_MODE_OFF);
 
 	skge_tx_clean(skge);
 	skge_rx_clean(skge);
@@ -2633,11 +2614,17 @@
 	spin_unlock(&skge->tx_lock);
 }
 
+/* Parity errors seem to happen when Genesis is connected to a switch
+ * with no other ports present. Heartbeat error??
+ */
 static void skge_mac_parity(struct skge_hw *hw, int port)
 {
-	printk(KERN_ERR PFX "%s: mac data parity error\n",
-	       hw->dev[port] ? hw->dev[port]->name
-	       : (port == 0 ? "(port A)": "(port B"));
+	struct net_device *dev = hw->dev[port];
+
+	if (dev) {
+		struct skge_port *skge = netdev_priv(dev);
+		++skge->net_stats.tx_heartbeat_errors;
+	}
 
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -3083,10 +3070,6 @@
 
 	spin_lock_init(&skge->tx_lock);
 
-	init_timer(&skge->led_blink);
-	skge->led_blink.function = skge_blink_timer;
-	skge->led_blink.data = (unsigned long) skge;
-
 	if (hw->chip_id != CHIP_ID_GENESIS) {
 		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		skge->rx_csum = 1;
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index fced3d2..b432f1b 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1449,10 +1449,12 @@
 	PHY_M_IS_DTE_CHANGE	= 1<<2, /* DTE Power Det. Status Changed */
 	PHY_M_IS_POL_CHANGE	= 1<<1, /* Polarity Changed */
 	PHY_M_IS_JABBER		= 1<<0, /* Jabber */
-};
 
-#define PHY_M_DEF_MSK	( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \
-			  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+	PHY_M_IS_DEF_MSK	= PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE |
+				  PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR,
+
+	PHY_M_IS_AN_MSK		= PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL,
+};
 
 /*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
 enum {
@@ -1509,7 +1511,7 @@
 	PHY_M_LEDC_TX_C_MSB	= 1<<0, /* Tx Control (MSB, 88E1111 only) */
 };
 
-#define PHY_M_LED_PULS_DUR(x)	(	((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x)	(((x)<<12) & PHY_M_LEDC_PULS_MSK)
 
 enum {
 	PULS_NO_STR	= 0,/* no pulse stretching */
@@ -1522,7 +1524,7 @@
 	PULS_1300MS	= 7,/* 1.3 s to 2.7 s */
 };
 
-#define PHY_M_LED_BLINK_RT(x)	(	((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x)	(((x)<<8) & PHY_M_LEDC_BL_R_MSK)
 
 enum {
 	BLINK_42MS	= 0,/* 42 ms */
@@ -1602,9 +1604,9 @@
 	PHY_M_FELP_LED0_MSK = 0xf, /* Bit  3.. 0: LED0 Mask (SPEED) */
 };
 
-#define PHY_M_FELP_LED2_CTRL(x)	(	((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x)	(	((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x)	(	((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x)	(((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x)	(((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x)	(((x)<<0) & PHY_M_FELP_LED0_MSK)
 
 enum {
 	LED_PAR_CTRL_COLX	= 0x00,
@@ -1640,7 +1642,7 @@
 	PHY_M_MAC_MD_COPPER	= 5,/* Copper only */
 	PHY_M_MAC_MD_1000BX	= 7,/* 1000Base-X only */
 };
-#define PHY_M_MAC_MODE_SEL(x)	(	((x)<<7) & PHY_M_MAC_MD_MSK)
+#define PHY_M_MAC_MODE_SEL(x)	(((x)<<7) & PHY_M_MAC_MD_MSK)
 
 /*****  PHY_MARV_PHY_CTRL (page 3)		16 bit r/w	LED Control Reg. *****/
 enum {
@@ -1650,10 +1652,10 @@
 	PHY_M_LEDC_STA0_MSK	= 0xf, /* Bit  3.. 0: STAT0 LED Ctrl. Mask */
 };
 
-#define PHY_M_LEDC_LOS_CTRL(x)	(	((x)<<12) & PHY_M_LEDC_LOS_MSK)
-#define PHY_M_LEDC_INIT_CTRL(x)	(	((x)<<8) & PHY_M_LEDC_INIT_MSK)
-#define PHY_M_LEDC_STA1_CTRL(x)	(	((x)<<4) & PHY_M_LEDC_STA1_MSK)
-#define PHY_M_LEDC_STA0_CTRL(x)	(	((x)<<0) & PHY_M_LEDC_STA0_MSK)
+#define PHY_M_LEDC_LOS_CTRL(x)	(((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x)	(((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x)	(((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x)	(((x)<<0) & PHY_M_LEDC_STA0_MSK)
 
 /* GMAC registers  */
 /* Port Registers */
@@ -2505,8 +2507,6 @@
 	dma_addr_t	     dma;
 	unsigned long	     mem_size;
 	unsigned int	     rx_buf_size;
-
-	struct timer_list    led_blink;
 };
 
 
@@ -2606,17 +2606,6 @@
 	skge_write16(hw, SK_GMAC_REG(port,r), v);
 }
 
-static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
-{
-	skge_write16(hw, SK_GMAC_REG(port, r), (u16) v);
-	skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16));
-}
-
-static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
-	skge_write8(hw, SK_GMAC_REG(port,r), v);
-}
-
 static inline void gma_set_addr(struct skge_hw *hw, int port, int reg,
 				    const u8 *addr)
 {
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 7089d86..a9b06b8 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -188,7 +188,7 @@
 #define	SMC_IRQ_TRIGGER_TYPE (( \
 		   machine_is_omap_h2() \
 		|| machine_is_omap_h3() \
-		|| (machine_is_omap_innovator() && !cpu_is_omap150()) \
+		|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
 	) ? IRQT_FALLING : IRQT_RISING)
 
 
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 368d2f9..1cc1492 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -621,8 +621,6 @@
 	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021),
 	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
 	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index fedae89..fb9a112 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -60,7 +60,9 @@
 			continue;
 
 		/* Ok, try it out.. */
-		ret = allocate_resource(r, res, size, min, -1, align,
+		ret = allocate_resource(r, res, size,
+					r->start ? : min,
+					-1, align,
 					alignf, alignf_data);
 		if (ret == 0)
 			break;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index df3bdae..93e8a87 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -507,7 +507,7 @@
 		pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
 
 		if (!is_cardbus) {
-			child->bridge_ctl = PCI_BRIDGE_CTL_NO_ISA;
+			child->bridge_ctl = bctl | PCI_BRIDGE_CTL_NO_ISA;
 			/*
 			 * Adjust subordinate busnr in parent buses.
 			 * We do this before scanning for children because
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1521fd5..8d0968b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -820,6 +820,11 @@
 			case 0x0001: /* Toshiba Satellite A40 */
 				asus_hides_smbus = 1;
 			}
+		if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+			switch(dev->subsystem_device) {
+			case 0x0001: /* Toshiba Tecra M2 */
+				asus_hides_smbus = 1;
+			}
        } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
                if (dev->device ==  PCI_DEVICE_ID_INTEL_82855PM_HB)
                        switch(dev->subsystem_device) {
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 838575e..713c78f 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -125,7 +125,9 @@
 		image += readw(pds + 16) * 512;
 	} while (!last_image);
 
-	*size = image - rom;
+	/* never return a size larger than the PCI resource window */
+	/* there are known ROMs that get the size wrong */
+	*size = min((size_t)(image - rom), *size);
 
 	return rom;
 }
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 9fe48f7..a2eebc6 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -51,8 +51,6 @@
 	struct resource_list head, *list, *tmp;
 	int idx;
 
-	bus->bridge_ctl &= ~PCI_BRIDGE_CTL_VGA;
-
 	head.next = NULL;
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		u16 class = dev->class >> 8;
@@ -62,10 +60,6 @@
 		    class == PCI_CLASS_BRIDGE_HOST)
 			continue;
 
-		if (class == PCI_CLASS_DISPLAY_VGA ||
-		    class == PCI_CLASS_NOT_DEFINED_VGA)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_VGA;
-
 		pdev_sort_resources(dev, &head);
 	}
 
@@ -509,12 +503,6 @@
 
 	pbus_assign_resources_sorted(bus);
 
-	if (bus->bridge_ctl & PCI_BRIDGE_CTL_VGA) {
-		/* Propagate presence of the VGA to upstream bridges */
-		for (b = bus; b->parent; b = b->parent) {
-			b->bridge_ctl |= PCI_BRIDGE_CTL_VGA;
-		}
-	}
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		b = dev->subordinate;
 		if (!b)
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 0a5c958..470ef75 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -388,6 +388,7 @@
 		struct au1000_pcmcia_socket *skt = PCMCIA_SOCKET(i);
 		memset(skt, 0, sizeof(*skt));
 
+		skt->socket.resource_ops = &pccard_static_ops;
 		skt->socket.ops = &au1x00_pcmcia_operations;
 		skt->socket.owner = ops->owner;
 		skt->socket.dev.dev = dev;
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index dd7651f..3afb682 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -88,31 +88,38 @@
 static void __iomem *
 set_cis_map(struct pcmcia_socket *s, unsigned int card_offset, unsigned int flags)
 {
-    pccard_mem_map *mem = &s->cis_mem;
-    int ret;
+	pccard_mem_map *mem = &s->cis_mem;
+	int ret;
 
-    if (!(s->features & SS_CAP_STATIC_MAP) && mem->res == NULL) {
-	mem->res = pcmcia_find_mem_region(0, s->map_size, s->map_size, 0, s);
-	if (mem->res == NULL) {
-	    printk(KERN_NOTICE "cs: unable to map card memory!\n");
-	    return NULL;
+	if (!(s->features & SS_CAP_STATIC_MAP) && (mem->res == NULL)) {
+		mem->res = pcmcia_find_mem_region(0, s->map_size, s->map_size, 0, s);
+		if (mem->res == NULL) {
+			printk(KERN_NOTICE "cs: unable to map card memory!\n");
+			return NULL;
+		}
+		s->cis_virt = NULL;
 	}
-	s->cis_virt = ioremap(mem->res->start, s->map_size);
-    }
-    mem->card_start = card_offset;
-    mem->flags = flags;
-    ret = s->ops->set_mem_map(s, mem);
-    if (ret) {
-	iounmap(s->cis_virt);
-	return NULL;
-    }
 
-    if (s->features & SS_CAP_STATIC_MAP) {
-	if (s->cis_virt)
-	    iounmap(s->cis_virt);
-	s->cis_virt = ioremap(mem->static_start, s->map_size);
-    }
-    return s->cis_virt;
+	if (!(s->features & SS_CAP_STATIC_MAP) && (!s->cis_virt))
+		s->cis_virt = ioremap(mem->res->start, s->map_size);
+
+	mem->card_start = card_offset;
+	mem->flags = flags;
+
+	ret = s->ops->set_mem_map(s, mem);
+	if (ret) {
+		iounmap(s->cis_virt);
+		s->cis_virt = NULL;
+		return NULL;
+	}
+
+	if (s->features & SS_CAP_STATIC_MAP) {
+		if (s->cis_virt)
+			iounmap(s->cis_virt);
+		s->cis_virt = ioremap(mem->static_start, s->map_size);
+	}
+
+	return s->cis_virt;
 }
 
 /*======================================================================
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 3e3c6f1..43da2e9 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -206,8 +206,8 @@
 	u32 hash;
 
 	if (!p_drv->attach || !p_drv->event || !p_drv->detach)
-		printk(KERN_DEBUG "pcmcia: %s does misses a callback function",
-		       p_drv->drv.name);
+		printk(KERN_DEBUG "pcmcia: %s lacks a requisite callback "
+		       "function\n", p_drv->drv.name);
 
 	while (did && did->match_flags) {
 		for (i=0; i<4; i++) {
@@ -589,8 +589,8 @@
 static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
 {
 	if (!s->pcmcia_state.device_add_pending) {
-		schedule_work(&s->device_add);
 		s->pcmcia_state.device_add_pending = 1;
+		schedule_work(&s->device_add);
 	}
 	return;
 }
diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h
index b1f6e3d..a234ce1 100644
--- a/drivers/pcmcia/o2micro.h
+++ b/drivers/pcmcia/o2micro.h
@@ -120,11 +120,16 @@
 #define  O2_MODE_E_LED_OUT	0x08
 #define  O2_MODE_E_SKTA_ACTV	0x10
 
+#define O2_RESERVED1		0x94
+#define O2_RESERVED2		0xD4
+#define O2_RES_READ_PREFETCH	0x02
+#define O2_RES_WRITE_BURST	0x08
+
 static int o2micro_override(struct yenta_socket *socket)
 {
 	/*
-	 * 'reserved' register at 0x94/D4. chaning it to 0xCA (8 bit) enables
-	 * read prefetching which for example makes the RME Hammerfall DSP
+	 * 'reserved' register at 0x94/D4. allows setting read prefetch and write
+	 * bursting. read prefetching for example makes the RME Hammerfall DSP
 	 * working. for some bridges it is at 0x94, for others at 0xD4. it's
 	 * ok to write to both registers on all O2 bridges.
 	 * from Eric Still, 02Micro.
@@ -132,20 +137,35 @@
 	u8 a, b;
 
 	if (PCI_FUNC(socket->dev->devfn) == 0) {
-		a = config_readb(socket, 0x94);
-		b = config_readb(socket, 0xD4);
+		a = config_readb(socket, O2_RESERVED1);
+		b = config_readb(socket, O2_RESERVED2);
 
 		printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
 
 		switch (socket->dev->device) {
+		/*
+		 * older bridges have problems with both read prefetch and write
+		 * bursting depending on the combination of the chipset, bridge
+		 * and the cardbus card. so disable them to be on the safe side.
+		 */
+		case PCI_DEVICE_ID_O2_6729:
+		case PCI_DEVICE_ID_O2_6730:
+		case PCI_DEVICE_ID_O2_6812:
 		case PCI_DEVICE_ID_O2_6832:
-			printk(KERN_INFO "Yenta O2: old bridge, not enabling read prefetch / write burst\n");
+		case PCI_DEVICE_ID_O2_6836:
+			printk(KERN_INFO "Yenta O2: old bridge, disabling read prefetch/write burst\n");
+			config_writeb(socket, O2_RESERVED1,
+			              a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
+			config_writeb(socket, O2_RESERVED2,
+			              b & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
 			break;
 
 		default:
 			printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n");
-			config_writeb(socket, 0x94, a | 0x0a);
-			config_writeb(socket, 0xD4, b | 0x0a);
+			config_writeb(socket, O2_RESERVED1,
+			              a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
+			config_writeb(socket, O2_RESERVED2,
+			              b | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
 		}
 	}
 
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 184f4f8..6f9fdb2 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -800,7 +800,7 @@
 	} else {
 		int try;
 		u32 mask = s->irq_mask;
-		void *data = NULL;
+		void *data = &p_dev->dev.driver; /* something unique to this device */
 
 		for (try = 0; try < 64; try++) {
 			irq = try % 32;
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 6837491..91e7457 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -642,6 +642,7 @@
 		    (yenta_search_res(socket, res, BRIDGE_IO_MIN))) {
 			config_writel(socket, addr_start, res->start);
 			config_writel(socket, addr_end, res->end);
+			return;
 		}
 	} else {
 		if (type & IORESOURCE_PREFETCH) {
@@ -650,6 +651,7 @@
 			    (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) {
 				config_writel(socket, addr_start, res->start);
 				config_writel(socket, addr_end, res->end);
+				return;
 			}
 			/* Approximating prefetchable by non-prefetchable */
 			res->flags = IORESOURCE_MEM;
@@ -659,6 +661,7 @@
 		    (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) {
 			config_writel(socket, addr_start, res->start);
 			config_writel(socket, addr_end, res->end);
+			return;
 		}
 	}
 
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 9b7f6f5..ee7a05e 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -235,6 +235,9 @@
 		sch->schib.pmcw.pam &
 		sch->schib.pmcw.pom &
 		sch->opm;
+	/* Check since device may again have become not operational. */
+	if (!sch->schib.pmcw.dnv)
+		state = DEV_STATE_NOT_OPER;
 	if (cdev->private->state == DEV_STATE_DISCONNECTED_SENSE_ID)
 		/* Force reprobe on all chpids. */
 		old_lpm = 0;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 96df148..f1e8c42 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -424,7 +424,7 @@
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_SATA
-	bool "Serial ATA (SATA) support"
+	tristate "Serial ATA (SATA) support"
 	depends on SCSI
 	help
 	  This driver family supports Serial ATA host controllers
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 3a11a53..4ab0786 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -15,11 +15,7 @@
 #define AAC_MAX_LUN		(8)
 
 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
-/*
- *  max_sectors is an unsigned short, otherwise limit is 0x100000000 / 512
- * Linux has starvation problems if we permit larger than 4MB I/O ...
- */
-#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)8192)
+#define AAC_MAX_32BIT_SGBCOUNT	((unsigned short)512)
 
 /*
  * These macros convert from physical channels to virtual channels
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c1a4f97..562da90 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -374,7 +374,8 @@
 	else
 		scsi_adjust_queue_depth(sdev, 0, 1);
 
-	if (host->max_sectors < AAC_MAX_32BIT_SGBCOUNT)
+	if (!(((struct aac_dev *)host->hostdata)->adapter_info.options
+	  & AAC_OPT_NEW_COMM))
 		blk_queue_max_segment_size(sdev->request_queue, 65536);
 
 	return 0;
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 116d0f5..687f19e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -1264,14 +1264,12 @@
 	}
 	switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) {
 	case AHC_DEV_Q_BASIC:
-		scsi_adjust_queue_depth(sdev,
-					MSG_SIMPLE_TASK,
-					dev->openings + dev->active);
+		scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
+		scsi_activate_tcq(sdev, dev->openings + dev->active);
 		break;
 	case AHC_DEV_Q_TAGGED:
-		scsi_adjust_queue_depth(sdev,
-					MSG_ORDERED_TASK,
-					dev->openings + dev->active);
+		scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
+		scsi_activate_tcq(sdev, dev->openings + dev->active);
 		break;
 	default:
 		/*
@@ -1280,9 +1278,7 @@
 		 * serially on the controller/device.  This should
 		 * remove some latency.
 		 */
-		scsi_adjust_queue_depth(sdev,
-					/*NON-TAGGED*/0,
-					/*queue depth*/2);
+		scsi_deactivate_tcq(sdev, 2);
 		break;
 	}
 }
@@ -1635,9 +1631,9 @@
 		spi_period(starget) = tinfo->curr.period;
 		spi_width(starget) = tinfo->curr.width;
 		spi_offset(starget) = tinfo->curr.offset;
-		spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ;
-		spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ;
-		spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ;
+		spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
+		spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
+		spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
 		spi_display_xfer_agreement(starget);
 		break;
 	}
@@ -2429,12 +2425,14 @@
 	unsigned int ppr_options = tinfo->goal.ppr_options
 		& ~MSG_EXT_PPR_DT_REQ;
 	unsigned int period = tinfo->goal.period;
+	unsigned int width = tinfo->goal.width;
 	unsigned long flags;
 	struct ahc_syncrate *syncrate;
 
 	if (dt) {
-		period = 9;	/* 12.5ns is the only period valid for DT */
 		ppr_options |= MSG_EXT_PPR_DT_REQ;
+		if (!width)
+			ahc_linux_set_width(starget, 1);
 	} else if (period == 9)
 		period = 10;	/* if resetting DT, period must be >= 25ns */
 
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm.c b/drivers/scsi/aic7xxx/aicasm/aicasm.c
index c346394..f936b69 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm.c
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm.c
@@ -369,7 +369,7 @@
 
 		fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
 			cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 			cur_instr->format.bytes[0],
 			cur_instr->format.bytes[1],
 			cur_instr->format.bytes[2],
@@ -613,7 +613,7 @@
 				line++;
 		}
 		fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 			cur_instr->format.bytes[0],
 			cur_instr->format.bytes[1],
 			cur_instr->format.bytes[2],
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
index 3e80f07..e64f802 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
@@ -42,8 +42,10 @@
  * $FreeBSD$
  */
 
+#include <asm/byteorder.h>
+
 struct ins_format1 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	immediate	: 8,
 			source		: 9,
 			destination	: 9,
@@ -61,7 +63,7 @@
 };
 
 struct ins_format2 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	shift_control	: 8,
 			source		: 9,
 			destination	: 9,
@@ -79,7 +81,7 @@
 };
 
 struct ins_format3 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	immediate	: 8,
 			source		: 9,
 			address		: 10,
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 3be5464..a2cfade 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -38,6 +38,7 @@
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
 	ICH5_PMR		= 0x90, /* port mapping register */
 	ICH5_PCS		= 0x92,	/* port control and status */
+	PIIX_SCC		= 0x0A, /* sub-class code register */
 
 	PIIX_FLAG_AHCI		= (1 << 28), /* AHCI possible */
 	PIIX_FLAG_CHECKINTR	= (1 << 29), /* make sure PCI INTx enabled */
@@ -62,6 +63,8 @@
 	ich6_sata_rm		= 4,
 	ich7_sata		= 5,
 	esb2_sata		= 6,
+
+	PIIX_AHCI_DEVICE	= 6,
 };
 
 static int piix_init_one (struct pci_dev *pdev,
@@ -574,11 +577,11 @@
 	addr = pci_resource_start(pdev, AHCI_PCI_BAR);
 	if (!addr || !pci_resource_len(pdev, AHCI_PCI_BAR))
 		return 0;
-	
+
 	mmio = ioremap(addr, 64);
 	if (!mmio)
 		return -ENOMEM;
-	
+
 	tmp = readl(mmio + AHCI_GLOBAL_CTL);
 	if (tmp & AHCI_ENABLE) {
 		tmp &= ~AHCI_ENABLE;
@@ -588,7 +591,7 @@
 		if (tmp & AHCI_ENABLE)
 			rc = -EIO;
 	}
-	
+
 	iounmap(mmio);
 	return rc;
 }
@@ -626,9 +629,13 @@
 	port_info[1] = NULL;
 
 	if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
-		int rc = piix_disable_ahci(pdev);
-		if (rc)
-			return rc;
+               u8 tmp;
+               pci_read_config_byte(pdev, PIIX_SCC, &tmp);
+               if (tmp == PIIX_AHCI_DEVICE) {
+                       int rc = piix_disable_ahci(pdev);
+                       if (rc)
+                           return rc;
+               }
 	}
 
 	if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
diff --git a/drivers/scsi/ibmvscsi/srp.h b/drivers/scsi/ibmvscsi/srp.h
index 2ae5154..7d8e4c4 100644
--- a/drivers/scsi/ibmvscsi/srp.h
+++ b/drivers/scsi/ibmvscsi/srp.h
@@ -35,7 +35,7 @@
 enum srp_types {
 	SRP_LOGIN_REQ_TYPE = 0x00,
 	SRP_LOGIN_RSP_TYPE = 0xC0,
-	SRP_LOGIN_REJ_TYPE = 0x80,
+	SRP_LOGIN_REJ_TYPE = 0xC2,
 	SRP_I_LOGOUT_TYPE = 0x03,
 	SRP_T_LOGOUT_TYPE = 0x80,
 	SRP_TSK_MGMT_TYPE = 0x01,
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 6dfcb4f..4cdd891 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -133,10 +133,12 @@
 /* 6.10.00  - Remove 1G Addressing Limitations                               */
 /* 6.11.xx  - Get VersionInfo buffer off the stack !              DDTS 60401 */
 /* 6.11.xx  - Make Logical Drive Info structure safe for DMA      DDTS 60639 */
-/* 7.10.xx  - Add highmem_io flag in SCSI Templete for 2.4 kernels           */
+/* 7.10.18  - Add highmem_io flag in SCSI Templete for 2.4 kernels           */
 /*          - Fix path/name for scsi_hosts.h include for 2.6 kernels         */
 /*          - Fix sort order of 7k                                           */
 /*          - Remove 3 unused "inline" functions                             */
+/* 7.12.xx  - Use STATIC functions whereever possible                        */
+/*          - Clean up deprecated MODULE_PARM calls                          */
 /*****************************************************************************/
 
 /*
@@ -207,8 +209,8 @@
 /*
  * DRIVER_VER
  */
-#define IPS_VERSION_HIGH        "7.10"
-#define IPS_VERSION_LOW         ".18 "
+#define IPS_VERSION_HIGH        "7.12"
+#define IPS_VERSION_LOW         ".02 "
 
 #if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__)
 #warning "This driver has only been tested on the x86/ia64/x86_64 platforms"
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 480e06f..505e967 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -87,15 +87,14 @@
       #define scsi_set_pci_device(sh,dev) (0)
    #endif
 
-   #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-   
-      #ifndef irqreturn_t
-         typedef void irqreturn_t;
-      #endif 
-      
+   #ifndef IRQ_NONE
+      typedef void irqreturn_t;
       #define IRQ_NONE
       #define IRQ_HANDLED
       #define IRQ_RETVAL(x)
+   #endif
+   
+   #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
       #define IPS_REGISTER_HOSTS(SHT)      scsi_register_module(MODULE_SCSI_HA,SHT)
       #define IPS_UNREGISTER_HOSTS(SHT)    scsi_unregister_module(MODULE_SCSI_HA,SHT)
       #define IPS_ADD_HOST(shost,device)
@@ -123,6 +122,10 @@
    #ifndef min
       #define min(x,y) ((x) < (y) ? x : y)
    #endif
+   
+   #ifndef __iomem       /* For clean compiles in earlier kernels without __iomem annotations */
+      #define __iomem
+   #endif
 
    #define pci_dma_hi32(a)         ((a >> 16) >> 16)
    #define pci_dma_lo32(a)         (a & 0xffffffff)
@@ -1206,13 +1209,13 @@
 
 #define IPS_VER_MAJOR 7
 #define IPS_VER_MAJOR_STRING "7"
-#define IPS_VER_MINOR 10
-#define IPS_VER_MINOR_STRING "10"
-#define IPS_VER_BUILD 18
-#define IPS_VER_BUILD_STRING "18"
-#define IPS_VER_STRING "7.10.18"
+#define IPS_VER_MINOR 12
+#define IPS_VER_MINOR_STRING "12"
+#define IPS_VER_BUILD 02
+#define IPS_VER_BUILD_STRING "02"
+#define IPS_VER_STRING "7.12.02"
 #define IPS_RELEASE_ID 0x00020000
-#define IPS_BUILD_IDENT 731
+#define IPS_BUILD_IDENT 761
 #define IPS_LEGALCOPYRIGHT_STRING "(C) Copyright IBM Corp. 1994, 2002. All Rights Reserved."
 #define IPS_ADAPTECCOPYRIGHT_STRING "(c) Copyright Adaptec, Inc. 2002 to 2004. All Rights Reserved."
 #define IPS_DELLCOPYRIGHT_STRING "(c) Copyright Dell 2004. All Rights Reserved."
@@ -1223,12 +1226,12 @@
 #define IPS_VER_SERVERAID2 "2.88.13"
 #define IPS_VER_NAVAJO "2.88.13"
 #define IPS_VER_SERVERAID3 "6.10.24"
-#define IPS_VER_SERVERAID4H "7.10.11"
-#define IPS_VER_SERVERAID4MLx "7.10.18"
-#define IPS_VER_SARASOTA "7.10.18"
-#define IPS_VER_MARCO "7.10.18"
-#define IPS_VER_SEBRING "7.10.18"
-#define IPS_VER_KEYWEST "7.10.18"
+#define IPS_VER_SERVERAID4H "7.12.02"
+#define IPS_VER_SERVERAID4MLx "7.12.02"
+#define IPS_VER_SARASOTA "7.12.02"
+#define IPS_VER_MARCO "7.12.02"
+#define IPS_VER_SEBRING "7.12.02"
+#define IPS_VER_KEYWEST "7.12.02"
 
 /* Compatability IDs for various adapters */
 #define IPS_COMPAT_UNKNOWN ""
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 0291a8f..0a7839d 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4149,12 +4149,10 @@
 			do_create_driverfs_files();
 			return 0;
 		}
-		if (st_sysfs_class)
-			class_destroy(st_sysfs_class);
 		unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
-
 					 ST_MAX_TAPE_ENTRIES);
 	}
+	class_destroy(st_sysfs_class);
 
 	printk(KERN_ERR "Unable to get major %d for SCSI tapes\n", SCSI_TAPE_MAJOR);
 	return 1;
@@ -4162,13 +4160,11 @@
 
 static void __exit exit_st(void)
 {
-	if (st_sysfs_class)
-		class_destroy(st_sysfs_class);
-	st_sysfs_class = NULL;
 	do_remove_driverfs_files();
 	scsi_unregister_driver(&st_template.gendrv);
 	unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
 				 ST_MAX_TAPE_ENTRIES);
+	class_destroy(st_sysfs_class);
 	kfree(scsi_tapes);
 	printk(KERN_INFO "st: Unloaded.\n");
 }
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 18c58fb..6b321e8 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -394,7 +394,7 @@
 }
 
 static int __devinit
-serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct uart_port port;
 	int ret, line, flags = dev_id->driver_data;
@@ -406,15 +406,23 @@
 	}
 
 	memset(&port, 0, sizeof(struct uart_port));
-	port.irq = pnp_irq(dev,0);
-	port.iobase = pnp_port_start(dev, 0);
+	port.irq = pnp_irq(dev, 0);
+	if (pnp_port_valid(dev, 0)) {
+		port.iobase = pnp_port_start(dev, 0);
+		port.iotype = UPIO_PORT;
+	} else if (pnp_mem_valid(dev, 0)) {
+		port.mapbase = pnp_mem_start(dev, 0);
+		port.iotype = UPIO_MEM;
+		port.flags = UPF_IOREMAP;
+	} else
+		return -ENODEV;
 
 #ifdef SERIAL_DEBUG_PNP
-	printk("Setup PNP port: port %x, irq %d, type %d\n",
-	       port.iobase, port.irq, port.iotype);
+	printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+	       port.iobase, port.mapbase, port.irq, port.iotype);
 #endif
 
-	port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+	port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
 	port.uartclk = 1843200;
 	port.dev = &dev->dev;
 
@@ -426,7 +434,7 @@
 
 }
 
-static void __devexit serial_pnp_remove(struct pnp_dev * dev)
+static void __devexit serial_pnp_remove(struct pnp_dev *dev)
 {
 	long line = (long)pnp_get_drvdata(dev);
 	if (line)
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index de0136c..1ae0b38 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -790,19 +790,19 @@
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
-	PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
-	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
-	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
 	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
 	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
@@ -840,7 +840,7 @@
 	PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
 	PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
 	PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
-	PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400", 0x816cc815, 0x23539b80),
+	PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
 	PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
 	PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
 	PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index cd329dd..85dacc9 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -20,6 +20,7 @@
 	default y if SA1111
 	default y if ARCH_OMAP
 	default y if ARCH_LH7A404
+	default y if ARCH_S3C2410
 	default y if PXA27x
 	# PPC:
 	default y if STB03xxx
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index adff5a7..16ecad3 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -980,6 +980,9 @@
 	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 787c27a..f86bf14 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -569,8 +569,11 @@
 			free_page((unsigned long)tbuf);
 			return -EINVAL;
 		}
-		snoop(&dev->dev, "control read: bRequest=%02x bRrequestType=%02x wValue=%04x wIndex=%04x\n", 
-			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex);
+		snoop(&dev->dev, "control read: bRequest=%02x "
+				"bRrequestType=%02x wValue=%04x "
+				"wIndex=%04x wLength=%04x\n",
+			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue,
+				ctrl.wIndex, ctrl.wLength);
 
 		usb_unlock_device(dev);
 		i = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ctrl.bRequest, ctrl.bRequestType,
@@ -579,11 +582,11 @@
 		if ((i > 0) && ctrl.wLength) {
 			if (usbfs_snoop) {
 				dev_info(&dev->dev, "control read: data ");
-				for (j = 0; j < ctrl.wLength; ++j)
+				for (j = 0; j < i; ++j)
 					printk ("%02x ", (unsigned char)(tbuf)[j]);
 				printk("\n");
 			}
-			if (copy_to_user(ctrl.data, tbuf, ctrl.wLength)) {
+			if (copy_to_user(ctrl.data, tbuf, i)) {
 				free_page((unsigned long)tbuf);
 				return -EFAULT;
 			}
@@ -595,8 +598,11 @@
 				return -EFAULT;
 			}
 		}
-		snoop(&dev->dev, "control write: bRequest=%02x bRrequestType=%02x wValue=%04x wIndex=%04x\n", 
-			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue, ctrl.wIndex);
+		snoop(&dev->dev, "control write: bRequest=%02x "
+				"bRrequestType=%02x wValue=%04x "
+				"wIndex=%04x wLength=%04x\n",
+			ctrl.bRequest, ctrl.bRequestType, ctrl.wValue,
+				ctrl.wIndex, ctrl.wLength);
 		if (usbfs_snoop) {
 			dev_info(&dev->dev, "control write: data: ");
 			for (j = 0; j < ctrl.wLength; ++j)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8616356..79422a3 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -939,9 +939,9 @@
 	case USB_SPEED_HIGH:	/* ISOC or INTR */
 		// FIXME adjust for input vs output
 		if (isoc)
-			tmp = HS_USECS (bytecount);
+			tmp = HS_NSECS_ISO (bytecount);
 		else
-			tmp = HS_USECS_ISO (bytecount);
+			tmp = HS_NSECS (bytecount);
 		return tmp;
 	default:
 		pr_debug ("%s: bogus device speed!\n", usbcore_name);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 67db4a9..28055f9 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -334,17 +334,19 @@
 extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
 
 /*
- * Ceiling microseconds (typical) for that many bytes at high speed
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
  * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
  * to preallocate bandwidth)
  */
 #define USB2_HOST_DELAY	5	/* nsec, guess */
-#define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
+#define HS_NSECS(bytes) ( ((55 * 8 * 2083)/1000) \
 	+ ((2083UL * (3167 + BitTime (bytes)))/1000) \
 	+ USB2_HOST_DELAY)
-#define HS_USECS_ISO(bytes) NS_TO_US ( ((38 * 8 * 2083)/1000) \
+#define HS_NSECS_ISO(bytes) ( ((38 * 8 * 2083)/1000) \
 	+ ((2083UL * (3167 + BitTime (bytes)))/1000) \
 	+ USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
 
 extern long usb_calc_bus_time (int speed, int is_input,
 			int isoc, int bytecount);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index a428ef4..88d1b37 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -985,8 +985,10 @@
 		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
 			struct usb_interface	*interface;
 
-			/* remove this interface */
+			/* remove this interface if it has been registered */
 			interface = dev->actconfig->interface[i];
+			if (!klist_node_attached(&interface->dev.knode_bus))
+				continue;
 			dev_dbg (&dev->dev, "unregistering interface %s\n",
 				interface->dev.bus_id);
 			usb_remove_sysfs_intf_files(interface);
@@ -1439,7 +1441,7 @@
 		}
 	}
 
-	return ret;
+	return 0;
 }
 
 // synchronous request completion model
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index d74b2d6..4f97a4a 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -657,8 +657,8 @@
 	 * For control/bulk requests, the HC or TT handles these.
 	 */
 	if (type == PIPE_INTERRUPT) {
-		qh->usecs = usb_calc_bus_time (USB_SPEED_HIGH, is_input, 0,
-				hb_mult (maxp) * max_packet (maxp));
+		qh->usecs = NS_TO_US (usb_calc_bus_time (USB_SPEED_HIGH, is_input, 0,
+				hb_mult (maxp) * max_packet (maxp)));
 		qh->start = NO_FRAME;
 
 		if (urb->dev->speed == USB_SPEED_HIGH) {
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 68decab..56b43f2 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -887,6 +887,10 @@
 #include "ohci-sa1111.c"
 #endif
 
+#ifdef CONFIG_ARCH_S3C2410
+#include "ohci-s3c2410.c"
+#endif
+
 #ifdef CONFIG_ARCH_OMAP
 #include "ohci-omap.c"
 #endif
@@ -909,6 +913,7 @@
 
 #if !(defined(CONFIG_PCI) \
       || defined(CONFIG_SA1111) \
+      || defined(CONFIG_ARCH_S3C2410) \
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
new file mode 100644
index 0000000..e940166
--- /dev/null
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -0,0 +1,496 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * USB Bus Glue for Samsung S3C2410
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Rusell King et al.
+ *
+ * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
+ *	by Ben Dooks, <ben@simtec.co.uk>
+ *	Copyright (C) 2004 Simtec Electronics
+ *
+ * Thanks to basprog@mail.ru for updates to newer kernels
+ *
+ * This file is licenced under the GPL.
+*/
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+#include <asm/arch/usb-control.h>
+
+#define valid_port(idx) ((idx) == 1 || (idx) == 2)
+
+/* clock device associated with the hcd */
+
+static struct clk *clk;
+
+/* forward definitions */
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
+
+/* conversion functions */
+
+struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+{
+	return hcd->self.controller->platform_data;
+}
+
+static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
+{
+	struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+	clk_enable(clk);
+
+	if (info != NULL) {
+		info->hcd	= hcd;
+		info->report_oc = s3c2410_hcd_oc;
+
+		if (info->enable_oc != NULL) {
+			(info->enable_oc)(info, 1);
+		}
+	}
+}
+
+static void s3c2410_stop_hc(struct platform_device *dev)
+{
+	struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+	dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
+
+	if (info != NULL) {
+		info->report_oc = NULL;
+		info->hcd	= NULL;
+
+		if (info->enable_oc != NULL) {
+			(info->enable_oc)(info, 0);
+		}
+	}
+
+	clk_disable(clk);
+}
+
+/* ohci_s3c2410_hub_status_data
+ *
+ * update the status data from the hub with anything that
+ * has been detected by our system
+*/
+
+static int
+ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+	struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+	struct s3c2410_hcd_port *port;
+	int orig;
+	int portno;
+
+	orig  = ohci_hub_status_data (hcd, buf);
+
+	if (info == NULL)
+		return orig;
+
+	port = &info->port[0];
+
+	/* mark any changed port as changed */
+
+	for (portno = 0; portno < 2; port++, portno++) {
+		if (port->oc_changed == 1 &&
+		    port->flags & S3C_HCDFLG_USED) {
+			dev_dbg(hcd->self.controller,
+				"oc change on port %d\n", portno);
+
+			if (orig < 1)
+				orig = 1;
+
+			buf[0] |= 1<<(portno+1);
+		}
+	}
+
+	return orig;
+}
+
+/* s3c2410_usb_set_power
+ *
+ * configure the power on a port, by calling the platform device
+ * routine registered with the platform device
+*/
+
+static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
+				  int port, int to)
+{
+	if (info == NULL)
+		return;
+
+	if (info->power_control != NULL) {
+		info->port[port-1].power = to;
+		(info->power_control)(port, to);
+	}
+}
+
+/* ohci_s3c2410_hub_control
+ *
+ * look at control requests to the hub, and see if we need
+ * to take any action or over-ride the results from the
+ * request.
+*/
+
+static int ohci_s3c2410_hub_control (
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	/* if we are only an humble host without any special capabilites
+	 * process the request straight away and exit */
+
+	if (info == NULL) {
+		ret = ohci_hub_control(hcd, typeReq, wValue,
+				       wIndex, buf, wLength);
+		goto out;
+	}
+
+	/* check the request to see if it needs handling */
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_POWER) {
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			s3c2410_usb_set_power(info, wIndex, 1);
+			goto out;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				info->port[wIndex-1].oc_changed = 0;
+				info->port[wIndex-1].oc_status = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (valid_port(wIndex)) {
+				info->port[wIndex-1].oc_status = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (valid_port(wIndex)) {
+				s3c2410_usb_set_power(info, wIndex, 0);
+				return 0;
+			}
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		if (info->power_control == NULL)
+			return ret;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+		if (info->enable_oc) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (valid_port(wIndex)) {
+			if (info->port[wIndex-1].oc_changed) {
+				*data |= cpu_to_le32(RH_PS_OCIC);
+			}
+
+			if (info->port[wIndex-1].oc_status) {
+				*data |= cpu_to_le32(RH_PS_POCI);
+			}
+		}
+	}
+
+ out:
+	return ret;
+}
+
+/* s3c2410_hcd_oc
+ *
+ * handle an over-current report
+*/
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+{
+	struct s3c2410_hcd_port *port;
+	struct usb_hcd *hcd;
+	unsigned long flags;
+	int portno;
+
+	if (info == NULL)
+		return;
+
+	port = &info->port[0];
+	hcd = info->hcd;
+
+	local_irq_save(flags);
+
+	for (portno = 0; portno < 2; port++, portno++) {
+		if (port_oc & (1<<portno) &&
+		    port->flags & S3C_HCDFLG_USED) {
+			port->oc_status = 1;
+			port->oc_changed = 1;
+
+			/* ok, once over-current is detected,
+			   the port needs to be powered down */
+			s3c2410_usb_set_power(info, portno+1, 0);
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/*
+ * usb_hcd_s3c2410_remove - shutdown processing for HCD
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+*/
+
+void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+	usb_remove_hcd(hcd);
+	s3c2410_stop_hc(dev);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+/**
+ * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+			   struct platform_device *dev)
+{
+	struct usb_hcd *hcd = NULL;
+	int retval;
+
+	s3c2410_usb_set_power(dev->dev.platform_data, 0, 1);
+	s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
+
+	hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = dev->resource[0].start;
+	hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_err(&dev->dev, "request_mem_region failed");
+		retval = -EBUSY;
+		goto err0;
+	}
+
+	clk = clk_get(NULL, "usb-host");
+	if (IS_ERR(clk)) {
+		dev_err(&dev->dev, "cannot get usb-host clock\n");
+		retval = -ENOENT;
+		goto err1;
+	}
+
+	clk_use(clk);
+	s3c2410_start_hc(dev, hcd);
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&dev->dev, "ioremap failed\n");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+	if (retval != 0)
+		goto err2;
+
+	return 0;
+
+ err2:
+	s3c2410_stop_hc(dev);
+	iounmap(hcd->regs);
+	clk_unuse(clk);
+	clk_put(clk);
+
+ err1:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ err0:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+ohci_s3c2410_start (struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run (ohci)) < 0) {
+		err ("can't start %s", hcd->self.bus_name);
+		ohci_stop (hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+
+static const struct hc_driver ohci_s3c2410_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"S3C24XX OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		ohci_s3c2410_start,
+	.stop =			ohci_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_s3c2410_hub_status_data,
+	.hub_control =		ohci_s3c2410_hub_control,
+
+#if defined(CONFIG_USB_SUSPEND) && 0
+	.hub_suspend =		ohci_hub_suspend,
+	.hub_resume =		ohci_hub_resume,
+#endif
+};
+
+/* device driver */
+
+static int ohci_hcd_s3c2410_drv_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
+}
+
+static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	usb_hcd_s3c2410_remove(hcd, pdev);
+	return 0;
+}
+
+static struct device_driver ohci_hcd_s3c2410_driver = {
+	.name		= "s3c2410-ohci",
+	.bus		= &platform_bus_type,
+	.probe		= ohci_hcd_s3c2410_drv_probe,
+	.remove		= ohci_hcd_s3c2410_drv_remove,
+	/*.suspend	= ohci_hcd_s3c2410_drv_suspend, */
+	/*.resume	= ohci_hcd_s3c2410_drv_resume, */
+};
+
+static int __init ohci_hcd_s3c2410_init (void)
+{
+	return driver_register(&ohci_hcd_s3c2410_driver);
+}
+
+static void __exit ohci_hcd_s3c2410_cleanup (void)
+{
+	driver_unregister(&ohci_hcd_s3c2410_driver);
+}
+
+module_init (ohci_hcd_s3c2410_init);
+module_exit (ohci_hcd_s3c2410_cleanup);
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
index ebcf7c9..13532f3 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/usb/input/acecad.c
@@ -31,6 +31,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /*
  * Version Information
@@ -87,8 +88,8 @@
 	if (prox) {
 		int x = data[1] | (data[2] << 8);
 		int y = data[3] | (data[4] << 8);
-		/*Pressure should compute the same way for flair and 302*/
-		int pressure = data[5] | ((int)data[6] << 8);
+		/* Pressure should compute the same way for flair and 302 */
+		int pressure = data[5] | (data[6] << 8);
 		int touch = data[0] & 0x01;
 		int stylus = (data[0] & 0x10) >> 4;
 		int stylus2 = (data[0] & 0x20) >> 5;
@@ -104,9 +105,9 @@
 	input_sync(dev);
 
 resubmit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
+		err("can't resubmit intr, %s-%s/input0, status %d",
 			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
 }
 
@@ -212,10 +213,7 @@
 
 	acecad->dev.name = acecad->name;
 	acecad->dev.phys = acecad->phys;
-	acecad->dev.id.bustype = BUS_USB;
-	acecad->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	acecad->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	acecad->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &acecad->dev.id);
 	acecad->dev.dev = &intf->dev;
 
 	usb_fill_int_urb(acecad->irq, dev, pipe,
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index 6bb0f25..cd0cbfe 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -77,6 +77,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <linux/sched.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
@@ -2125,10 +2126,7 @@
 	aiptek->inputdev.absflat[ABS_WHEEL] = 0;
 	aiptek->inputdev.name = "Aiptek";
 	aiptek->inputdev.phys = aiptek->features.usbPath;
-	aiptek->inputdev.id.bustype = BUS_USB;
-	aiptek->inputdev.id.vendor = le16_to_cpu(usbdev->descriptor.idVendor);
-	aiptek->inputdev.id.product = le16_to_cpu(usbdev->descriptor.idProduct);
-	aiptek->inputdev.id.version = le16_to_cpu(usbdev->descriptor.bcdDevice);
+	usb_to_input_id(usbdev, &aiptek->inputdev.id);
 	aiptek->inputdev.dev = &intf->dev;
 
 	aiptek->usbdev = usbdev;
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 654ac45..fd99681 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -94,6 +94,7 @@
 #include <linux/moduleparam.h>
 #include <linux/input.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <linux/wait.h>
 
 /*
@@ -635,11 +636,8 @@
 	idev->name = ati_remote->name;
 	idev->phys = ati_remote->phys;
 
-	idev->id.bustype = BUS_USB;
-	idev->id.vendor = le16_to_cpu(ati_remote->udev->descriptor.idVendor);
-	idev->id.product = le16_to_cpu(ati_remote->udev->descriptor.idProduct);
-	idev->id.version = le16_to_cpu(ati_remote->udev->descriptor.bcdDevice);
-	idev->dev = &(ati_remote->udev->dev);
+	usb_to_input_id(ati_remote->udev, &idev->id);
+	idev->dev = &ati_remote->udev->dev;
 }
 
 static int ati_remote_initialize(struct ati_remote *ati_remote)
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 2350e7a..b2cb2b3 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -789,12 +789,12 @@
 	return -1;
 }
 
-static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, struct pt_regs *regs)
+static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, int interrupt, struct pt_regs *regs)
 {
 	hid_dump_input(usage, value);
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_hid_event(hid, field, usage, value, regs);
-	if (hid->claimed & HID_CLAIMED_HIDDEV)
+	if (hid->claimed & HID_CLAIMED_HIDDEV && interrupt)
 		hiddev_hid_event(hid, field, usage, value, regs);
 }
 
@@ -804,7 +804,7 @@
  * reporting to the layer).
  */
 
-static void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, struct pt_regs *regs)
+static void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt, struct pt_regs *regs)
 {
 	unsigned n;
 	unsigned count = field->report_count;
@@ -831,19 +831,19 @@
 	for (n = 0; n < count; n++) {
 
 		if (HID_MAIN_ITEM_VARIABLE & field->flags) {
-			hid_process_event(hid, field, &field->usage[n], value[n], regs);
+			hid_process_event(hid, field, &field->usage[n], value[n], interrupt, regs);
 			continue;
 		}
 
 		if (field->value[n] >= min && field->value[n] <= max
 			&& field->usage[field->value[n] - min].hid
 			&& search(value, field->value[n], count))
-				hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, regs);
+				hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, interrupt, regs);
 
 		if (value[n] >= min && value[n] <= max
 			&& field->usage[value[n] - min].hid
 			&& search(field->value, value[n], count))
-				hid_process_event(hid, field, &field->usage[value[n] - min], 1, regs);
+				hid_process_event(hid, field, &field->usage[value[n] - min], 1, interrupt, regs);
 	}
 
 	memcpy(field->value, value, count * sizeof(__s32));
@@ -851,7 +851,7 @@
 	kfree(value);
 }
 
-static int hid_input_report(int type, struct urb *urb, struct pt_regs *regs)
+static int hid_input_report(int type, struct urb *urb, int interrupt, struct pt_regs *regs)
 {
 	struct hid_device *hid = urb->context;
 	struct hid_report_enum *report_enum = hid->report_enum + type;
@@ -899,7 +899,7 @@
 		hiddev_report_event(hid, report);
 
 	for (n = 0; n < report->maxfield; n++)
-		hid_input_field(hid, report->field[n], data, regs);
+		hid_input_field(hid, report->field[n], data, interrupt, regs);
 
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_report_event(hid, report);
@@ -918,7 +918,7 @@
 
 	switch (urb->status) {
 		case 0:			/* success */
-			hid_input_report(HID_INPUT_REPORT, urb, regs);
+			hid_input_report(HID_INPUT_REPORT, urb, 1, regs);
 			break;
 		case -ECONNRESET:	/* unlink */
 		case -ENOENT:
@@ -1142,7 +1142,7 @@
 	switch (urb->status) {
 		case 0:			/* success */
 			if (hid->ctrl[hid->ctrltail].dir == USB_DIR_IN)
-				hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, regs);
+				hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, 0, regs);
 		case -ESHUTDOWN:	/* unplug */
 		case -EILSEQ:		/* unplug timectrl on uhci */
 			unplug = 1;
@@ -1372,6 +1372,9 @@
 #define USB_VENDOR_ID_A4TECH		0x09da
 #define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
 
+#define USB_VENDOR_ID_AASHIMA		0x06D6
+#define USB_DEVICE_ID_AASHIMA_GAMEPAD	0x0025
+
 #define USB_VENDOR_ID_CYPRESS		0x04b4
 #define USB_DEVICE_ID_CYPRESS_MOUSE	0x0001
 #define USB_DEVICE_ID_CYPRESS_HIDCOM	0x5500
@@ -1548,6 +1551,7 @@
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
 	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE, HID_QUIRK_2WHEEL_MOUSE_HACK_5 },
 
+	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c
index 9ac1e90..63a4db7 100644
--- a/drivers/usb/input/hid-input.c
+++ b/drivers/usb/input/hid-input.c
@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #undef DEBUG
 
@@ -397,11 +398,12 @@
 
 void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, struct pt_regs *regs)
 {
-	struct input_dev *input = &field->hidinput->input;
+	struct input_dev *input;
 	int *quirks = &hid->quirks;
 
-	if (!input)
+	if (!field->hidinput)
 		return;
+	input = &field->hidinput->input;
 
 	input_regs(input, regs);
 
@@ -581,10 +583,7 @@
 				hidinput->input.name = hid->name;
 				hidinput->input.phys = hid->phys;
 				hidinput->input.uniq = hid->uniq;
-				hidinput->input.id.bustype = BUS_USB;
-				hidinput->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-				hidinput->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
-				hidinput->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+				usb_to_input_id(dev, &hidinput->input.id);
 				hidinput->input.dev = &hid->intf->dev;
 			}
 
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
index 47dec6a..0dc439f 100644
--- a/drivers/usb/input/itmtouch.c
+++ b/drivers/usb/input/itmtouch.c
@@ -53,6 +53,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /* only an 8 byte buffer necessary for a single packet */
 #define ITM_BUFSIZE			8
@@ -184,10 +185,7 @@
 
 	itmtouch->inputdev.name = itmtouch->name;
 	itmtouch->inputdev.phys = itmtouch->phys;
-	itmtouch->inputdev.id.bustype = BUS_USB;
-	itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
-	itmtouch->inputdev.id.product = udev->descriptor.idProduct;
-	itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+	usb_to_input_id(udev, &itmtouch->inputdev.id);
 	itmtouch->inputdev.dev = &intf->dev;
 
 	if (!strlen(itmtouch->name))
diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c
index d2f0f90..b6f6ac8 100644
--- a/drivers/usb/input/kbtab.c
+++ b/drivers/usb/input/kbtab.c
@@ -4,6 +4,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
@@ -167,10 +168,7 @@
 
 	kbtab->dev.name = "KB Gear Tablet";
 	kbtab->dev.phys = kbtab->phys;
-	kbtab->dev.id.bustype = BUS_USB;
-	kbtab->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	kbtab->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	kbtab->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &kbtab->dev.id);
 	kbtab->dev.dev = &intf->dev;
 	kbtab->usbdev = dev;
 
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index 09b5cc7..ff92750 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -53,6 +53,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #define MTOUCHUSB_MIN_XC                0x0
 #define MTOUCHUSB_MAX_RAW_XC            0x4000
@@ -232,10 +233,7 @@
 
 	mtouch->input.name = mtouch->name;
 	mtouch->input.phys = mtouch->phys;
-	mtouch->input.id.bustype = BUS_USB;
-	mtouch->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	mtouch->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	mtouch->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &mtouch->input.id);
 	mtouch->input.dev = &intf->dev;
 
 	mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index 3975b30..ad4afe7 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #define POWERMATE_VENDOR	0x077d	/* Griffin Technology, Inc. */
 #define POWERMATE_PRODUCT_NEW	0x0410	/* Griffin PowerMate */
@@ -389,10 +390,7 @@
 	pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
 	pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
 	pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
-	pm->input.id.bustype = BUS_USB;
-	pm->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	pm->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	pm->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &pm->input.id);
 	pm->input.event = powermate_input_event;
 	pm->input.dev = &intf->dev;
 	pm->input.phys = pm->phys;
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 386595e..4276c24 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -35,7 +35,7 @@
 #define DEBUG
 #endif
 #include <linux/usb.h>
-
+#include <linux/usb_input.h>
 
 #define TOUCHKIT_MIN_XC			0x0
 #define TOUCHKIT_MAX_XC			0x07ff
@@ -202,10 +202,7 @@
 
 	touchkit->input.name = touchkit->name;
 	touchkit->input.phys = touchkit->phys;
-	touchkit->input.id.bustype = BUS_USB;
-	touchkit->input.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	touchkit->input.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	touchkit->input.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &touchkit->input.id);
 	touchkit->input.dev = &intf->dev;
 
 	touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index f35db19..28987f1 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -32,6 +32,7 @@
 #include <linux/input.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /*
  * Version Information
@@ -288,10 +289,7 @@
 
 	kbd->dev.name = kbd->name;
 	kbd->dev.phys = kbd->phys;
-	kbd->dev.id.bustype = BUS_USB;
-	kbd->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	kbd->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	kbd->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &kbd->dev.id);
 	kbd->dev.dev = &iface->dev;
 
 	if (dev->manufacturer)
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index 1ec41b5..4104dec 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 /*
  * Version Information
@@ -171,10 +172,7 @@
 
 	mouse->dev.name = mouse->name;
 	mouse->dev.phys = mouse->phys;
-	mouse->dev.id.bustype = BUS_USB;
-	mouse->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	mouse->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	mouse->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &mouse->dev.id);
 	mouse->dev.dev = &intf->dev;
 
 	if (dev->manufacturer)
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index f6b34af..02412e3 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -69,6 +69,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
@@ -823,10 +824,7 @@
 
 	wacom->dev.name = wacom->features->name;
 	wacom->dev.phys = wacom->phys;
-	wacom->dev.id.bustype = BUS_USB;
-	wacom->dev.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-	wacom->dev.id.product = le16_to_cpu(dev->descriptor.idProduct);
-	wacom->dev.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+	usb_to_input_id(dev, &wacom->dev.id);
 	wacom->dev.dev = &intf->dev;
 	wacom->usbdev = dev;
 
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index a7fa1b1..18125e0 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -62,6 +62,7 @@
 #include <linux/module.h>
 #include <linux/smp_lock.h>
 #include <linux/usb.h>
+#include <linux/usb_input.h>
 
 #define DRIVER_VERSION "v0.0.5"
 #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
@@ -256,10 +257,7 @@
 
 	xpad->udev = udev;
 
-	xpad->dev.id.bustype = BUS_USB;
-	xpad->dev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	xpad->dev.id.product = le16_to_cpu(udev->descriptor.idProduct);
-	xpad->dev.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
+	usb_to_input_id(udev, &xpad->dev.id);
 	xpad->dev.dev = &intf->dev;
 	xpad->dev.private = xpad;
 	xpad->dev.name = xpad_device[i].name;
diff --git a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c
index 08521a2..20ac9e1 100644
--- a/drivers/usb/media/konicawc.c
+++ b/drivers/usb/media/konicawc.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/usb_input.h>
 
 #include "usbvideo.h"
 
@@ -845,10 +846,7 @@
 		cam->input.private = cam;
 		cam->input.evbit[0] = BIT(EV_KEY);
 		cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
-		cam->input.id.bustype = BUS_USB;
-		cam->input.id.vendor = le16_to_cpu(dev->descriptor.idVendor);
-		cam->input.id.product = le16_to_cpu(dev->descriptor.idProduct);
-		cam->input.id.version = le16_to_cpu(dev->descriptor.bcdDevice);
+		usb_to_input_id(dev, &cam->input.id);
 		input_register_device(&cam->input);
 		
 		usb_make_path(dev, cam->input_physname, 56);
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 66ec883..ad17892 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -23,6 +23,7 @@
  *
  * V0.1  (mh) Initial version
  * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint)
+ * V0.12 (mh) Added kmalloc check for string buffer
  */
 
 #include <linux/config.h>
@@ -84,7 +85,7 @@
 	{ }					/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, ld_usb_table);
-MODULE_VERSION("V0.11");
+MODULE_VERSION("V0.12");
 MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
 MODULE_DESCRIPTION("LD USB Driver");
 MODULE_LICENSE("GPL");
@@ -635,6 +636,10 @@
 	     (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) &&
 	    (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
 		buffer = kmalloc(256, GFP_KERNEL);
+		if (buffer == NULL) {
+			dev_err(&intf->dev, "Couldn't allocate string buffer\n");
+			goto error;
+		}
 		/* usb_string makes SETUP+STALL to leave always ControlReadLoop */
 		usb_string(udev, 255, buffer, 256);
 		kfree(buffer);
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 5f4496d..fcd6d3c 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -59,7 +59,6 @@
 
 static int loopback = 0;
 static int mii_mode = 0;
-static int multicast_filter_limit = 32;
 
 static struct usb_eth_dev usb_dev_id[] = {
 #define	PEGASUS_DEV(pn, vid, pid, flags)	\
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index 626b016..59ab40e 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -167,8 +167,6 @@
 
 typedef struct rtl8150 rtl8150_t;
 
-static unsigned long multicast_filter_limit = 32;
-
 static void fill_skb_pool(rtl8150_t *);
 static void free_skb_pool(rtl8150_t *);
 static inline struct sk_buff *pull_skb(rtl8150_t *);
diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c
index 3b387b0..29cd801 100644
--- a/drivers/usb/net/zd1201.c
+++ b/drivers/usb/net/zd1201.c
@@ -29,6 +29,7 @@
 	{USB_DEVICE(0x0ace, 0x1201)}, /* ZyDAS ZD1201 Wireless USB Adapter */
 	{USB_DEVICE(0x050d, 0x6051)}, /* Belkin F5D6051 usb  adapter */
 	{USB_DEVICE(0x0db0, 0x6823)}, /* MSI UB11B usb  adapter */
+	{USB_DEVICE(0x1044, 0x8005)}, /* GIGABYTE GN-WLBZ201 usb adapter */
 	{}
 };
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0b03dda..d1964a0 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -429,6 +429,9 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ }						/* Terminating entry */
 };
 
@@ -545,6 +548,7 @@
 
 
 #define WDR_TIMEOUT 5000 /* default urb timeout */
+#define WDR_SHORT_TIMEOUT 1000	/* shorter urb timeout */
 
 /* High and low are for DTR, RTS etc etc */
 #define HIGH 1
@@ -593,62 +597,59 @@
 	 return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
 }
 
-static int set_rts(struct usb_serial_port *port, int high_or_low)
+#define set_mctrl(port, set)		update_mctrl((port), (set), 0)
+#define clear_mctrl(port, clear)	update_mctrl((port), 0, (clear))
+
+static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *buf;
-	unsigned ftdi_high_or_low;
+	unsigned urb_value;
 	int rv;
-	
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-	
-	if (high_or_low) {
-		ftdi_high_or_low = FTDI_SIO_SET_RTS_HIGH;
-		priv->last_dtr_rts |= TIOCM_RTS;
-	} else {
-		ftdi_high_or_low = FTDI_SIO_SET_RTS_LOW;
-		priv->last_dtr_rts &= ~TIOCM_RTS;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
+		return 0;	/* no change */
 	}
+
+	buf = kmalloc(1, GFP_NOIO);
+	if (!buf) {
+		return -ENOMEM;
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (clear & TIOCM_DTR)
+		urb_value |= FTDI_SIO_SET_DTR_LOW;
+	if (clear & TIOCM_RTS)
+		urb_value |= FTDI_SIO_SET_RTS_LOW;
+	if (set & TIOCM_DTR)
+		urb_value |= FTDI_SIO_SET_DTR_HIGH;
+	if (set & TIOCM_RTS)
+		urb_value |= FTDI_SIO_SET_RTS_HIGH;
 	rv = usb_control_msg(port->serial->dev,
 			       usb_sndctrlpipe(port->serial->dev, 0),
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST, 
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
-			       ftdi_high_or_low, priv->interface, 
+			       urb_value, priv->interface,
 			       buf, 0, WDR_TIMEOUT);
 
 	kfree(buf);
-	return rv;
-}
-
-
-static int set_dtr(struct usb_serial_port *port, int high_or_low)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
-	unsigned ftdi_high_or_low;
-	int rv;
-	
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
-	if (high_or_low) {
-		ftdi_high_or_low = FTDI_SIO_SET_DTR_HIGH;
-		priv->last_dtr_rts |= TIOCM_DTR;
+	if (rv < 0) {
+		err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+				__FUNCTION__,
+				(set & TIOCM_DTR) ? "HIGH" :
+				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
+				(set & TIOCM_RTS) ? "HIGH" :
+				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
 	} else {
-		ftdi_high_or_low = FTDI_SIO_SET_DTR_LOW;
-		priv->last_dtr_rts &= ~TIOCM_DTR;
+		dbg("%s - DTR %s, RTS %s", __FUNCTION__,
+				(set & TIOCM_DTR) ? "HIGH" :
+				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
+				(set & TIOCM_RTS) ? "HIGH" :
+				(clear & TIOCM_RTS) ? "LOW" : "unchanged");
+		priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
 	}
-	rv = usb_control_msg(port->serial->dev,
-			       usb_sndctrlpipe(port->serial->dev, 0),
-			       FTDI_SIO_SET_MODEM_CTRL_REQUEST, 
-			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
-			       ftdi_high_or_low, priv->interface, 
-			       buf, 0, WDR_TIMEOUT);
-
-	kfree(buf);
 	return rv;
 }
 
@@ -681,7 +682,7 @@
 			    FTDI_SIO_SET_BAUDRATE_REQUEST,
 			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
 			    urb_value, urb_index,
-			    buf, 0, 100);
+			    buf, 0, WDR_SHORT_TIMEOUT);
 
 	kfree(buf);
 	return rv;
@@ -1219,12 +1220,7 @@
 	/* FIXME: Flow control might be enabled, so it should be checked -
 	   we have no control of defaults! */
 	/* Turn on RTS and DTR since we are not flow controlling by default */
-	if (set_dtr(port, HIGH) < 0) {
-		err("%s Error from DTR HIGH urb", __FUNCTION__);
-	}
-	if (set_rts(port, HIGH) < 0){
-		err("%s Error from RTS HIGH urb", __FUNCTION__);
-	}
+	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 
 	/* Not throttled */
 	spin_lock_irqsave(&priv->rx_lock, flags);
@@ -1274,14 +1270,8 @@
 			err("error from flowcontrol urb");
 		}	    
 
-		/* drop DTR */
-		if (set_dtr(port, LOW) < 0){
-			err("Error from DTR LOW urb");
-		}
-		/* drop RTS */
-		if (set_rts(port, LOW) < 0) {
-			err("Error from RTS LOW urb");
-		}
+		/* drop RTS and DTR */
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} /* Note change no line if hupcl is off */
 
 	/* cancel any scheduled reading */
@@ -1797,7 +1787,7 @@
 			    FTDI_SIO_SET_DATA_REQUEST, 
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
-			    buf, 0, 100) < 0) {
+			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
 		err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
 	}	   
 
@@ -1812,25 +1802,14 @@
 			err("%s error from disable flowcontrol urb", __FUNCTION__);
 		}	    
 		/* Drop RTS and DTR */
-		if (set_dtr(port, LOW) < 0){
-			err("%s Error from DTR LOW urb", __FUNCTION__);
-		}
-		if (set_rts(port, LOW) < 0){
-			err("%s Error from RTS LOW urb", __FUNCTION__);
-		}	
-		
+		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
 		if (change_speed(port)) {
 			err("%s urb failed to set baurdrate", __FUNCTION__);
 		}
 		/* Ensure  RTS and DTR are raised */
-		else if (set_dtr(port, HIGH) < 0){
-			err("%s Error from DTR HIGH urb", __FUNCTION__);
-		}
-		else if (set_rts(port, HIGH) < 0){
-			err("%s Error from RTS HIGH urb", __FUNCTION__);
-		}	
+		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
 
 	/* Set flow control */
@@ -1942,35 +1921,8 @@
 
 static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
 {
-	int ret;
-	
 	dbg("%s TIOCMSET", __FUNCTION__);
-	if (set & TIOCM_DTR){
-		if ((ret = set_dtr(port, HIGH)) < 0) {
-			err("Urb to set DTR failed");
-			return(ret);
-		}
-	}
-	if (set & TIOCM_RTS) {
-		if ((ret = set_rts(port, HIGH)) < 0){
-			err("Urb to set RTS failed");
-			return(ret);
-		}
-	}
-	
-	if (clear & TIOCM_DTR){
-		if ((ret = set_dtr(port, LOW)) < 0){
-			err("Urb to unset DTR failed");
-			return(ret);
-		}
-	}	
-	if (clear & TIOCM_RTS) {
-		if ((ret = set_rts(port, LOW)) < 0){
-			err("Urb to unset RTS failed");
-			return(ret);
-		}
-	}
-	return(0);
+	return update_mctrl(port, set, clear);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8866376..9f43420 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -265,10 +265,24 @@
 #define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
 
 /*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ */
+#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
+
+/*
  * Active Robots product ids.
  */
 #define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
 
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 6051a64..353f24d 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -257,7 +257,8 @@
 		endpoint = &iface_desc->endpoint[i].desc;
 
 		if (!dev->bulk_in_endpointAddr &&
-		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+					== USB_DIR_IN) &&
 		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 					== USB_ENDPOINT_XFER_BULK)) {
 			/* we found a bulk in endpoint */
@@ -272,7 +273,8 @@
 		}
 
 		if (!dev->bulk_out_endpointAddr &&
-		    !(endpoint->bEndpointAddress & USB_DIR_OUT) &&
+		    ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+					== USB_DIR_OUT) &&
 		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
 					== USB_ENDPOINT_XFER_BULK)) {
 			/* we found a bulk out endpoint */
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 40784a9..d2e19f6 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -80,10 +80,12 @@
  */
 void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height)
 {
-	int i;
+	int i, j;
 
 	for (i = height; i--; ) {
-		memcpy(dst, src, s_pitch);
+		/* s_pitch is a few bytes at the most, memcpy is suboptimal */
+		for (j = 0; j < s_pitch; j++)
+			dst[j] = src[j];
 		src += s_pitch;
 		dst += d_pitch;
 	}
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index 63b505c..1147b89 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -244,15 +244,15 @@
 
 /* Format for cmap is "%02x%c%4x%4x%4x\n" */
 /* %02x entry %c transp %4x red %4x blue %4x green \n */
-/* 255 rows at 16 chars equals 4096 */
-/* PAGE_SIZE can be 4096 or larger */
+/* 256 rows at 16 chars equals 4096, the normal page size */
+/* the code will automatically adjust for different page sizes */
 static ssize_t store_cmap(struct class_device *class_device, const char *buf,
 			  size_t count)
 {
 	struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device);
 	int rc, i, start, length, transp = 0;
 
-	if ((count > 4096) || ((count % 16) != 0) || (PAGE_SIZE < 4096))
+	if ((count > PAGE_SIZE) || ((count % 16) != 0))
 		return -EINVAL;
 
 	if (!fb_info->fbops->fb_setcolreg && !fb_info->fbops->fb_setcmap)
@@ -317,18 +317,18 @@
 	   !fb_info->cmap.green)
 		return -EINVAL;
 
-	if (PAGE_SIZE < 4096)
+	if (fb_info->cmap.len > PAGE_SIZE / 16)
 		return -EINVAL;
 
 	/* don't mess with the format, the buffer is PAGE_SIZE */
-	/* 255 entries at 16 chars per line equals 4096 = PAGE_SIZE */
+	/* 256 entries at 16 chars per line equals 4096 = PAGE_SIZE */
 	for (i = 0; i < fb_info->cmap.len; i++) {
-		sprintf(&buf[ i * 16], "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start,
+		snprintf(&buf[ i * 16], PAGE_SIZE - i * 16, "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start,
 			((fb_info->cmap.transp && fb_info->cmap.transp[i]) ? '*' : ' '),
 			fb_info->cmap.red[i], fb_info->cmap.blue[i],
 			fb_info->cmap.green[i]);
 	}
-	return 4096;
+	return 16 * fb_info->cmap.len;
 }
 
 static ssize_t store_blank(struct class_device *class_device, const char * buf,
@@ -414,6 +414,13 @@
 			fb_info->var.xoffset);
 }
 
+static ssize_t show_name(struct class_device *class_device, char *buf)
+{
+	struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", fb_info->fix.id);
+}
+
 static struct class_device_attribute class_device_attrs[] = {
 	__ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp),
 	__ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank),
@@ -424,6 +431,7 @@
 	__ATTR(modes, S_IRUGO|S_IWUSR, show_modes, store_modes),
 	__ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan),
 	__ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual),
+	__ATTR(name, S_IRUGO, show_name, NULL),
 };
 
 int fb_init_class_device(struct fb_info *fb_info)
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index da8004e..698ca92 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -454,13 +454,16 @@
 static void tridentfb_fillrect(struct fb_info * info, const struct fb_fillrect *fr)
 {
 	int bpp = info->var.bits_per_pixel;
-	int col;
+	int col = 0;
 	
 	switch (bpp) {
 		default:
-		case 8: col = fr->color;
+		case 8: col |= fr->color;
+			col |= col << 8;
+			col |= col << 16;
 			break;
 		case 16: col = ((u32 *)(info->pseudo_palette))[fr->color];
+			
 			 break;
 		case 32: col = ((u32 *)(info->pseudo_palette))[fr->color];
 			 break;
@@ -882,8 +885,9 @@
 
 	write3X4(GraphEngReg, 0x80);	//enable GE for text acceleration
 
-//	if (info->var.accel_flags & FB_ACCELF_TEXT)
-//FIXME		acc->init_accel(info->var.xres,bpp);
+#ifdef CONFIG_FB_TRIDENT_ACCEL	
+	acc->init_accel(info->var.xres,bpp);
+#endif
 	
 	switch (bpp) {
 		case 8:  tmp = 0x00; break;
@@ -900,7 +904,7 @@
 	write3X4(DRAMControl, tmp);	//both IO,linear enable
 
 	write3X4(InterfaceSel, read3X4(InterfaceSel) | 0x40);
-	write3X4(Performance,0x20);
+	write3X4(Performance,0x92);
 	write3X4(PCIReg,0x07);		//MMIO & PCI read and write burst enable
 
 	/* convert from picoseconds to MHz */
@@ -981,12 +985,14 @@
 		t_outb(green>>10,0x3C9);
 		t_outb(blue>>10,0x3C9);
 
-	} else
-	if (bpp == 16) 			/* RGB 565 */
-			((u32*)info->pseudo_palette)[regno] = (red & 0xF800) |
-			((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11);
-	else
-	if (bpp == 32)		/* ARGB 8888 */
+	} else if (bpp == 16) {	/* RGB 565 */
+		u32 col;
+
+		col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
+			((blue & 0xF800) >> 11);
+		col |= col << 16;	
+		((u32 *)(info->pseudo_palette))[regno] = col;
+	} else if (bpp == 32)		/* ARGB 8888 */
 		((u32*)info->pseudo_palette)[regno] =
 			((transp & 0xFF00) <<16) 	|
 			((red & 0xFF00) << 8) 		|
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index 9ed1a93..a272592 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -45,7 +45,7 @@
 };
 
 static int             inverse   = 0;
-static int             mtrr      = 1;
+static int             mtrr      = 3; /* default to write-combining */
 static int	       vram_remap __initdata = 0; /* Set amount of memory to be used */
 static int	       vram_total __initdata = 0; /* Set total amount of memory */
 static int             pmi_setpal = 0;	/* pmi for palette changes ??? */
@@ -204,8 +204,8 @@
 			pmi_setpal=0;
 		else if (! strcmp(this_opt, "pmipal"))
 			pmi_setpal=1;
-		else if (! strcmp(this_opt, "mtrr"))
-			mtrr=1;
+		else if (! strncmp(this_opt, "mtrr:", 5))
+			mtrr = simple_strtoul(this_opt+5, NULL, 0);
 		else if (! strcmp(this_opt, "nomtrr"))
 			mtrr=0;
 		else if (! strncmp(this_opt, "vtotal:", 7))
@@ -387,14 +387,39 @@
 
 	if (mtrr) {
 		unsigned int temp_size = size_total;
-		/* Find the largest power-of-two */
-		while (temp_size & (temp_size - 1))
-			temp_size &= (temp_size - 1);
+		unsigned int type = 0;
 
-		/* Try and find a power of two to add */
-		while (temp_size > PAGE_SIZE &&
-			mtrr_add(vesafb_fix.smem_start, temp_size, MTRR_TYPE_WRCOMB, 1)==-EINVAL) {
-			temp_size >>= 1;
+		switch (mtrr) {
+		case 1:
+			type = MTRR_TYPE_UNCACHABLE;
+			break;
+		case 2:
+			type = MTRR_TYPE_WRBACK;
+			break;
+		case 3:
+			type = MTRR_TYPE_WRCOMB;
+			break;
+		case 4:
+			type = MTRR_TYPE_WRTHROUGH;
+			break;
+		default:
+			type = 0;
+			break;
+		}
+
+		if (type) {
+			int rc;
+
+			/* Find the largest power-of-two */
+			while (temp_size & (temp_size - 1))
+				temp_size &= (temp_size - 1);
+
+			/* Try and find a power of two to add */
+			do {
+				rc = mtrr_add(vesafb_fix.smem_start, temp_size,
+					      type, 1);
+				temp_size >>= 1;
+			} while (temp_size >= PAGE_SIZE && rc == -EINVAL);
 		}
 	}
 	
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 4f12079..711b909 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -30,7 +30,7 @@
 	  This support is also available as a module.  If so, the module
 	  will be called ds9490r.ko.
 
-config W1_DS9490R_BRIDGE
+config W1_DS9490_BRIDGE
 	tristate "DS9490R USB <-> W1 transport layer for 1-wire"
 	depends on W1_DS9490
 	help
diff --git a/fs/Kconfig b/fs/Kconfig
index 5d0c4be..e54be70 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -363,12 +363,15 @@
 	bool "Inotify file change notification support"
 	default y
 	---help---
-	  Say Y here to enable inotify support and the /dev/inotify character
-	  device.  Inotify is a file change notification system and a
+	  Say Y here to enable inotify support and the associated system
+	  calls.  Inotify is a file change notification system and a
 	  replacement for dnotify.  Inotify fixes numerous shortcomings in
 	  dnotify and introduces several new features.  It allows monitoring
-	  of both files and directories via a single open fd.  Multiple file
-	  events are supported.
+	  of both files and directories via a single open fd.  Other features
+	  include multiple file events, one-shot support, and unmount
+	  notification.
+
+	  For more information, see Documentation/filesystems/inotify.txt
 
 	  If unsure, say Y.
 
diff --git a/fs/bio.c b/fs/bio.c
index ca8f7a8..249dd6b 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -261,6 +261,7 @@
 	 */
 	bio->bi_vcnt = bio_src->bi_vcnt;
 	bio->bi_size = bio_src->bi_size;
+	bio->bi_idx = bio_src->bi_idx;
 	bio_phys_segments(q, bio);
 	bio_hw_segments(q, bio);
 }
diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c
index 6ad1211..a096c5a 100644
--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -480,6 +480,8 @@
 			return;
 		}
 		for (i = 0; i < tree->pages_per_bnode; i++) {
+			if (!node->page[i])
+				continue;
 			mark_page_accessed(node->page[i]);
 #if REF_PAGES
 			put_page(node->page[i]);
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index cbc8510..5ea6b3d 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -482,7 +482,8 @@
 		page_cache_release(page);
 		mark_inode_dirty(inode);
 		return;
-	}
+	} else if (inode->i_size == HFS_I(inode)->phys_size)
+		return;
 	size = inode->i_size + HFS_SB(sb)->alloc_blksz - 1;
 	blk_cnt = size / HFS_SB(sb)->alloc_blksz;
 	alloc_cnt = HFS_I(inode)->alloc_blocks;
diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c
index 267872e..8868d3b 100644
--- a/fs/hfsplus/bnode.c
+++ b/fs/hfsplus/bnode.c
@@ -643,6 +643,8 @@
 			return;
 		}
 		for (i = 0; i < tree->pages_per_bnode; i++) {
+			if (!node->page[i])
+				continue;
 			mark_page_accessed(node->page[i]);
 #if REF_PAGES
 			put_page(node->page[i]);
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index 376498c..e7235ca 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -461,7 +461,9 @@
 		page_cache_release(page);
 		mark_inode_dirty(inode);
 		return;
-	}
+	} else if (inode->i_size == HFSPLUS_I(inode).phys_size)
+		return;
+
 	blk_cnt = (inode->i_size + HFSPLUS_SB(sb).alloc_blksz - 1) >> HFSPLUS_SB(sb).alloc_blksz_shift;
 	alloc_cnt = HFSPLUS_I(inode).alloc_blocks;
 	if (blk_cnt == alloc_cnt)
diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index c1516d0..67bca0d 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -69,6 +69,7 @@
 extern int write_file(int fd, unsigned long long *offset, const char *buf,
 		      int len);
 extern int lseek_file(int fd, long long offset, int whence);
+extern int fsync_file(int fd, int datasync);
 extern int file_create(char *name, int ur, int uw, int ux, int gr,
 		       int gw, int gx, int or, int ow, int ox);
 extern int set_attr(const char *file, struct hostfs_iattr *attrs);
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 88e68ca..b2d1820 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -382,7 +382,7 @@
 
 int hostfs_fsync(struct file *file, struct dentry *dentry, int datasync)
 {
-	return(0);
+	return fsync_file(HOSTFS_I(dentry->d_inode)->fd, datasync);
 }
 
 static struct file_operations hostfs_file_fops = {
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index 4796e84..b97809d 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -153,10 +153,24 @@
 	int ret;
 
 	ret = lseek64(fd, offset, whence);
-	if(ret < 0) return(-errno);
+	if(ret < 0)
+		return(-errno);
 	return(0);
 }
 
+int fsync_file(int fd, int datasync)
+{
+	int ret;
+	if (datasync)
+		ret = fdatasync(fd);
+	else
+		ret = fsync(fd);
+
+	if (ret < 0)
+		return -errno;
+	return 0;
+}
+
 void close_file(void *stream)
 {
 	close(*((int *) stream));
diff --git a/fs/inotify.c b/fs/inotify.c
index a8a714e..27ebcac 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -90,6 +90,7 @@
 	unsigned int		queue_size;	/* size of the queue (bytes) */
 	unsigned int		event_count;	/* number of pending events */
 	unsigned int		max_events;	/* maximum number of events */
+	u32			last_wd;	/* the last wd allocated */
 };
 
 /*
@@ -352,7 +353,7 @@
 	do {
 		if (unlikely(!idr_pre_get(&dev->idr, GFP_KERNEL)))
 			return -ENOSPC;
-		ret = idr_get_new(&dev->idr, watch, &watch->wd);
+		ret = idr_get_new_above(&dev->idr, watch, dev->last_wd, &watch->wd);
 	} while (ret == -EAGAIN);
 
 	return ret;
@@ -401,6 +402,7 @@
 		return ERR_PTR(ret);
 	}
 
+	dev->last_wd = ret;
 	watch->mask = mask;
 	atomic_set(&watch->count, 0);
 	INIT_LIST_HEAD(&watch->d_list);
@@ -899,6 +901,7 @@
 	dev->queue_size = 0;
 	dev->max_events = inotify_max_queued_events;
 	dev->user = user;
+	dev->last_wd = 0;
 	atomic_set(&dev->count, 0);
 
 	get_inotify_dev(dev);
diff --git a/fs/namei.c b/fs/namei.c
index 02a824c..83559dc 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1801,8 +1801,8 @@
 	}
 	up(&dentry->d_inode->i_sem);
 	if (!error) {
-		fsnotify_rmdir(dentry, dentry->d_inode, dir);
 		d_delete(dentry);
+		fsnotify_rmdir(dentry, dentry->d_inode, dir);
 	}
 	dput(dentry);
 
@@ -1874,8 +1874,14 @@
 
 	/* We don't d_delete() NFS sillyrenamed files--they still exist. */
 	if (!error && !(dentry->d_flags & DCACHE_NFSFS_RENAMED)) {
-		fsnotify_unlink(dentry, dir);
+#if defined(CONFIG_INOTIFY) || defined(CONFIG_DNOTIFY)
+		dget(dentry);
 		d_delete(dentry);
+		fsnotify_unlink(dentry, dir);
+		dput(dentry);
+#else
+		d_delete(dentry);
+#endif
 	}
 
 	return error;
@@ -2218,7 +2224,7 @@
 		error = vfs_rename_other(old_dir,old_dentry,new_dir,new_dentry);
 	if (!error) {
 		const char *new_name = old_dentry->d_name.name;
-		fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir);
+		fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir, new_dentry->d_inode);
 	}
 	fsnotify_oldname_free(old_name);
 
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 335288b9..4013d79 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -437,8 +437,8 @@
 {
 	struct dentry *dir = kobj->dentry;
 	struct dentry *victim;
-	struct sysfs_dirent *sd;
-	umode_t umode = (mode & S_IALLUGO) | S_IFREG;
+	struct inode * inode;
+	struct iattr newattrs;
 	int res = -ENOENT;
 
 	down(&dir->d_inode->i_sem);
@@ -446,13 +446,15 @@
 	if (!IS_ERR(victim)) {
 		if (victim->d_inode &&
 		    (victim->d_parent->d_inode == dir->d_inode)) {
-			sd = victim->d_fsdata;
-			attr->mode = mode;
-			sd->s_mode = umode;
-			victim->d_inode->i_mode = umode;
-			dput(victim);
-			res = 0;
+			inode = victim->d_inode;
+			down(&inode->i_sem);
+			newattrs.ia_mode = (mode & S_IALLUGO) |
+						(inode->i_mode & ~S_IALLUGO);
+			newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
+			res = notify_change(victim, &newattrs);
+			up(&inode->i_sem);
 		}
+		dput(victim);
 	}
 	up(&dir->d_inode->i_sem);
 
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 8de13ba..d727dc9 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -85,7 +85,7 @@
 
 		if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
 			mode &= ~S_ISGID;
-		sd_iattr->ia_mode = mode;
+		sd_iattr->ia_mode = sd->s_mode = mode;
 	}
 
 	return error;
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index caeaa71..579fe19 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -56,8 +56,9 @@
 /* ACPI PCI Interrupt Link (pci_link.c) */
 
 int acpi_irq_penalty_init (void);
-int acpi_pci_link_get_irq (acpi_handle handle, int index, int *edge_level,
+int acpi_pci_link_allocate_irq (acpi_handle handle, int index, int *edge_level,
 	int *active_high_low, char **name);
+int acpi_pci_link_free_irq(acpi_handle handle);
 
 /* ACPI PCI Interrupt Routing (pci_irq.c) */
 
diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
index c1adc6b..aad7aad 100644
--- a/include/asm-arm/bitops.h
+++ b/include/asm-arm/bitops.h
@@ -229,6 +229,7 @@
 extern int _find_first_bit_be(const unsigned long *p, unsigned size);
 extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 
+#ifndef CONFIG_SMP
 /*
  * The __* form of bitops are non-atomic and may be reordered.
  */
@@ -241,6 +242,10 @@
 	(__builtin_constant_p(nr) ?		\
 	 ____atomic_##name(nr, p) :		\
 	 _##name##_be(nr,p))
+#else
+#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
+#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#endif
 
 #define NONATOMIC_BITOP(name,nr,p)		\
 	(____nonatomic_##name(nr, p))
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 195ccdc..450eae2 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -11,5 +11,6 @@
 extern char _sextratext[] __attribute__((weak));
 extern char _eextratext[] __attribute__((weak));
 extern char _end[];
+extern char __per_cpu_start[], __per_cpu_end[];
 
 #endif /* _ASM_GENERIC_SECTIONS_H_ */
diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h
index 9db0b712..ddf1739 100644
--- a/include/asm-i386/bitops.h
+++ b/include/asm-i386/bitops.h
@@ -311,6 +311,20 @@
 int find_next_zero_bit(const unsigned long *addr, int size, int offset);
 
 /**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	__asm__("bsfl %1,%0"
+		:"=r" (word)
+		:"rm" (word));
+	return word;
+}
+
+/**
  * find_first_bit - find the first set bit in a memory region
  * @addr: The address to start the search at
  * @size: The maximum size to search
@@ -320,22 +334,15 @@
  */
 static inline int find_first_bit(const unsigned long *addr, unsigned size)
 {
-	int d0, d1;
-	int res;
+	int x = 0;
 
-	/* This looks at memory. Mark it volatile to tell gcc not to move it around */
-	__asm__ __volatile__(
-		"xorl %%eax,%%eax\n\t"
-		"repe; scasl\n\t"
-		"jz 1f\n\t"
-		"leal -4(%%edi),%%edi\n\t"
-		"bsfl (%%edi),%%eax\n"
-		"1:\tsubl %%ebx,%%edi\n\t"
-		"shll $3,%%edi\n\t"
-		"addl %%edi,%%eax"
-		:"=a" (res), "=&c" (d0), "=&D" (d1)
-		:"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
-	return res;
+	while (x < size) {
+		unsigned long val = *addr++;
+		if (val)
+			return __ffs(val) + x;
+		x += (sizeof(*addr)<<3);
+	}
+	return x;
 }
 
 /**
@@ -360,20 +367,6 @@
 	return word;
 }
 
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-	__asm__("bsfl %1,%0"
-		:"=r" (word)
-		:"rm" (word));
-	return word;
-}
-
 /*
  * fls: find last bit set.
  */
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
index 78c85985a..2cbab30 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -18,11 +18,9 @@
 #define pcibios_scan_all_fns(a, b)	0
 
 extern unsigned long pci_mem_start;
-#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_IO		0x4000
 #define PCIBIOS_MIN_MEM		(pci_mem_start)
 
-#define PCIBIOS_MIN_CARDBUS_IO	0x4000
-
 void pcibios_config_init(void);
 struct pci_bus * pcibios_scan_root(int bus);
 
diff --git a/include/asm-i386/smp.h b/include/asm-i386/smp.h
index edad9b4..a283738 100644
--- a/include/asm-i386/smp.h
+++ b/include/asm-i386/smp.h
@@ -37,9 +37,6 @@
 extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
 
-extern void smp_flush_tlb(void);
-extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
-extern void smp_invalidate_rcv(void);		/* Process an NMI */
 extern void (*mtrr_hook) (void);
 extern void zap_low_mappings (void);
 extern void lock_ipi_call_lock(void);
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
index 87f0511..21e41c9 100644
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -35,8 +35,10 @@
 #define PPC44x_LOW_SLOT		63
 
 /* LS 32-bits of UART0 physical address location for early serial text debug */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
 #define UART0_PHYS_IO_BASE	0xf0000200
+#elif defined(CONFIG_440EP)
+#define UART0_PHYS_IO_BASE	0xe0000000
 #else
 #define UART0_PHYS_IO_BASE	0x40000200
 #endif
@@ -49,11 +51,16 @@
 /*
  * Standard 4GB "page" definitions
  */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
 #define	PPC44x_IO_PAGE		0x0000000100000000ULL
 #define	PPC44x_PCICFG_PAGE	0x0000000900000000ULL
 #define	PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
 #define	PPC44x_PCIMEM_PAGE	0x0000000a00000000ULL
+#elif defined(CONFIG_440EP)
+#define PPC44x_IO_PAGE		0x0000000000000000ULL
+#define PPC44x_PCICFG_PAGE	0x0000000000000000ULL
+#define PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
+#define PPC44x_PCIMEM_PAGE	0x0000000000000000ULL
 #else
 #define	PPC44x_IO_PAGE		0x0000000100000000ULL
 #define	PPC44x_PCICFG_PAGE	0x0000000200000000ULL
@@ -64,7 +71,7 @@
 /*
  * 36-bit trap ranges
  */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
 #define PPC44x_IO_LO		0xf0000000UL
 #define PPC44x_IO_HI		0xf0000fffUL
 #define PPC44x_PCI0CFG_LO	0x0ec00000UL
@@ -75,6 +82,13 @@
 #define PPC44x_PCI2CFG_HI	0x2ec00007UL
 #define PPC44x_PCIMEM_LO	0x80000000UL
 #define PPC44x_PCIMEM_HI	0xdfffffffUL
+#elif defined(CONFIG_440EP)
+#define PPC44x_IO_LO		0xef500000UL
+#define PPC44x_IO_HI		0xefffffffUL
+#define PPC44x_PCI0CFG_LO	0xeec00000UL
+#define PPC44x_PCI0CFG_HI	0xeecfffffUL
+#define PPC44x_PCIMEM_LO	0xa0000000UL
+#define PPC44x_PCIMEM_HI	0xdfffffffUL
 #else
 #define PPC44x_IO_LO		0x40000000UL
 #define PPC44x_IO_HI		0x40000fffUL
@@ -152,6 +166,12 @@
 #define DCRN_SDR_UART0		0x0120
 #define DCRN_SDR_UART1		0x0121
 
+#ifdef CONFIG_440EP
+#define DCRN_SDR_UART2		0x0122
+#define DCRN_SDR_UART3		0x0123
+#define DCRN_SDR_CUST0		0x4000
+#endif
+
 /* SDR read/write helper macros */
 #define SDR_READ(offset) ({\
 	mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
@@ -169,6 +189,14 @@
 #define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
 #define DCRN_MAL_BASE		0x180
 
+#ifdef CONFIG_440EP
+#define DCRN_DMA2P40_BASE	0x300
+#define DCRN_DMA2P41_BASE	0x308
+#define DCRN_DMA2P42_BASE	0x310
+#define DCRN_DMA2P43_BASE	0x318
+#define DCRN_DMA2P4SR_BASE	0x320
+#endif
+
 /* UIC */
 #define DCRN_UIC0_BASE	0xc0
 #define DCRN_UIC1_BASE	0xd0
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
index 35260af..e807be9 100644
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -97,6 +97,10 @@
 
 #elif CONFIG_44x
 
+#if defined(CONFIG_BAMBOO)
+#include <platforms/4xx/bamboo.h>
+#endif
+
 #if defined(CONFIG_EBONY)
 #include <platforms/4xx/ebony.h>
 #endif
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
index 8c61d93..3f7b566 100644
--- a/include/asm-ppc/ibm_ocp.h
+++ b/include/asm-ppc/ibm_ocp.h
@@ -71,6 +71,8 @@
 
 /* Sysfs support */
 #define OCP_SYSFS_EMAC_DATA()						\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx)	\
@@ -78,9 +80,14 @@
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq)	\
 OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode)	\
+OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map)	\
 									\
 void ocp_show_emac_data(struct device *dev)				\
 {									\
+	device_create_file(dev, &dev_attr_emac_rgmii_idx);		\
+	device_create_file(dev, &dev_attr_emac_rgmii_mux);		\
 	device_create_file(dev, &dev_attr_emac_zmii_idx);		\
 	device_create_file(dev, &dev_attr_emac_zmii_mux);		\
 	device_create_file(dev, &dev_attr_emac_mal_idx);		\
@@ -88,6 +95,9 @@
 	device_create_file(dev, &dev_attr_emac_mal_tx_chan);		\
 	device_create_file(dev, &dev_attr_emac_wol_irq);		\
 	device_create_file(dev, &dev_attr_emac_mdio_idx);		\
+	device_create_file(dev, &dev_attr_emac_tah_idx);		\
+	device_create_file(dev, &dev_attr_emac_phy_mode);		\
+	device_create_file(dev, &dev_attr_emac_phy_map);		\
 }
 
 #ifdef CONFIG_40x
@@ -157,7 +167,7 @@
 									\
 void ocp_show_iic_data(struct device *dev)				\
 {									\
-	device_create_file(dev, &dev_attr_iic_fast_mode);			\
+	device_create_file(dev, &dev_attr_iic_fast_mode);		\
 }
 #endif /* __IBM_OCP_H__ */
 #endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppc_asm.h b/include/asm-ppc/ppc_asm.h
index f76221d..bb53e2d 100644
--- a/include/asm-ppc/ppc_asm.h
+++ b/include/asm-ppc/ppc_asm.h
@@ -186,6 +186,12 @@
 #define PPC405_ERR77_SYNC
 #endif
 
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
 /* The boring bits... */
 
 /* Condition Register Bit Fields */
diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h
index a7894e0..3173ab3 100644
--- a/include/asm-ppc/unistd.h
+++ b/include/asm-ppc/unistd.h
@@ -279,8 +279,11 @@
 #define __NR_waitid		272
 #define __NR_ioprio_set		273
 #define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
 
-#define __NR_syscalls		275
+#define __NR_syscalls		278
 
 #define __NR(n)	#n
 
diff --git a/include/asm-ppc64/machdep.h b/include/asm-ppc64/machdep.h
index f0c1d2d..f0ef063 100644
--- a/include/asm-ppc64/machdep.h
+++ b/include/asm-ppc64/machdep.h
@@ -84,7 +84,7 @@
 
 	void		(*init_IRQ)(void);
 	int		(*get_irq)(struct pt_regs *);
-	void		(*cpu_irq_down)(void);
+	void		(*cpu_irq_down)(int secondary);
 
 	/* PCI stuff */
 	void		(*pcibios_fixup)(void);
diff --git a/include/asm-ppc64/topology.h b/include/asm-ppc64/topology.h
index fcdcfd2..1e9b190 100644
--- a/include/asm-ppc64/topology.h
+++ b/include/asm-ppc64/topology.h
@@ -33,6 +33,7 @@
 	return first_cpu(tmp);
 }
 
+#define pcibus_to_node(node)    (-1)
 #define pcibus_to_cpumask(bus)	(cpu_online_map)
 
 #define nr_cpus_node(node)	(nr_cpus_in_node[node])
@@ -59,8 +60,10 @@
 	.nr_balance_failed	= 0,			\
 }
 
-#endif /* CONFIG_NUMA */
+#else
 
 #include <asm-generic/topology.h>
 
+#endif /* CONFIG_NUMA */
+
 #endif /* _ASM_PPC64_TOPOLOGY_H */
diff --git a/include/asm-ppc64/unistd.h b/include/asm-ppc64/unistd.h
index 4a94acf..977bc98 100644
--- a/include/asm-ppc64/unistd.h
+++ b/include/asm-ppc64/unistd.h
@@ -285,8 +285,11 @@
 #define __NR_waitid		272
 #define __NR_ioprio_set		273
 #define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
 
-#define __NR_syscalls		275
+#define __NR_syscalls		278
 #ifdef __KERNEL__
 #define NR_syscalls	__NR_syscalls
 #endif
diff --git a/include/asm-ppc64/xics.h b/include/asm-ppc64/xics.h
index 0c45e14..1092af5 100644
--- a/include/asm-ppc64/xics.h
+++ b/include/asm-ppc64/xics.h
@@ -17,7 +17,7 @@
 void xics_init_IRQ(void);
 int xics_get_irq(struct pt_regs *);
 void xics_setup_cpu(void);
-void xics_teardown_cpu(void);
+void xics_teardown_cpu(int secondary);
 void xics_cause_IPI(int cpu);
 void xics_request_IPIs(void);
 void xics_migrate_irqs_away(void);
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 363db45..221e965 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -274,8 +274,13 @@
 #define __NR_request_key	279
 #define __NR_keyctl		280
 #define __NR_waitid		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
 
-#define NR_syscalls 282
+#define NR_syscalls 287
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-um/vm86.h b/include/asm-um/vm86.h
new file mode 100644
index 0000000..7801f82
--- /dev/null
+++ b/include/asm-um/vm86.h
@@ -0,0 +1,6 @@
+#ifndef __UM_VM86_H
+#define __UM_VM86_H
+
+#include "asm/arch/vm86.h"
+
+#endif
diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86_64/bitops.h
index a31bb99..05a0d37 100644
--- a/include/asm-x86_64/bitops.h
+++ b/include/asm-x86_64/bitops.h
@@ -348,8 +348,7 @@
 		return __ffs(b[0]);
 	if (b[1])
 		return __ffs(b[1]) + 64;
-	if (b[2])
-		return __ffs(b[2]) + 128;
+	return __ffs(b[2]) + 128;
 }
 
 /**
diff --git a/include/asm-x86_64/bug.h b/include/asm-x86_64/bug.h
index 3d2a666..eed7856 100644
--- a/include/asm-x86_64/bug.h
+++ b/include/asm-x86_64/bug.h
@@ -8,17 +8,24 @@
  * this frame.
  */
 struct bug_frame {
-       unsigned char ud2[2];
+	unsigned char ud2[2];
+	unsigned char mov;
 	/* should use 32bit offset instead, but the assembler doesn't 
 	   like it */
 	char *filename;
+	unsigned char ret;
 	unsigned short line;
 } __attribute__((packed));
 
 #ifdef CONFIG_BUG
 #define HAVE_ARCH_BUG
-#define BUG() \
-	asm volatile("ud2 ; .quad %c1 ; .short %c0" :: \
+/* We turn the bug frame into valid instructions to not confuse
+   the disassembler. Thanks to Jan Beulich & Suresh Siddha
+   for nice instruction selection.
+   The magic numbers generate mov $64bitimm,%eax ; ret $offset. */
+#define BUG() 								\
+	asm volatile(							\
+	"ud2 ; .byte 0xa3 ; .quad %c1 ; .byte 0xc2 ; .short %c0" :: 	\
 		     "i"(__LINE__), "i" (__stringify(__FILE__)))
 void out_of_line_bug(void);
 #else
diff --git a/include/asm-x86_64/desc.h b/include/asm-x86_64/desc.h
index 6aefb9c..c89b58b 100644
--- a/include/asm-x86_64/desc.h
+++ b/include/asm-x86_64/desc.h
@@ -75,6 +75,7 @@
  */
 extern struct desc_struct default_ldt[];
 extern struct gate_struct idt_table[]; 
+extern struct desc_ptr cpu_gdt_descr[];
 
 static inline void _set_gate(void *adr, unsigned type, unsigned long func, unsigned dpl, unsigned ist)  
 {
diff --git a/include/asm-x86_64/ipi.h b/include/asm-x86_64/ipi.h
index d184184..5e166b9 100644
--- a/include/asm-x86_64/ipi.h
+++ b/include/asm-x86_64/ipi.h
@@ -82,30 +82,27 @@
 	 */
 	local_irq_save(flags);
 
-	for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) {
-		if (cpu_isset(query_cpu, mask)) {
+	for_each_cpu_mask(query_cpu, mask) {
+		/*
+		 * Wait for idle.
+		 */
+		apic_wait_icr_idle();
 
-			/*
-			 * Wait for idle.
-			 */
-			apic_wait_icr_idle();
+		/*
+		 * prepare target chip field
+		 */
+		cfg = __prepare_ICR2(x86_cpu_to_apicid[query_cpu]);
+		apic_write_around(APIC_ICR2, cfg);
 
-			/*
-			 * prepare target chip field
-			 */
-			cfg = __prepare_ICR2(x86_cpu_to_apicid[query_cpu]);
-			apic_write_around(APIC_ICR2, cfg);
+		/*
+		 * program the ICR
+		 */
+		cfg = __prepare_ICR(0, vector, APIC_DEST_PHYSICAL);
 
-			/*
-			 * program the ICR
-			 */
-			cfg = __prepare_ICR(0, vector, APIC_DEST_PHYSICAL);
-
-			/*
-			 * Send the IPI. The write to APIC_ICR fires this off.
-			 */
-			apic_write_around(APIC_ICR, cfg);
-		}
+		/*
+		 * Send the IPI. The write to APIC_ICR fires this off.
+		 */
+		apic_write_around(APIC_ICR, cfg);
 	}
 	local_irq_restore(flags);
 }
diff --git a/include/asm-x86_64/irq.h b/include/asm-x86_64/irq.h
index eb3b7aa..4482657 100644
--- a/include/asm-x86_64/irq.h
+++ b/include/asm-x86_64/irq.h
@@ -57,4 +57,6 @@
 extern void fixup_irqs(cpumask_t map);
 #endif
 
+#define __ARCH_HAS_DO_SOFTIRQ 1
+
 #endif /* _ASM_IRQ_H */
diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h
index bc70023..ba15279 100644
--- a/include/asm-x86_64/msr.h
+++ b/include/asm-x86_64/msr.h
@@ -218,7 +218,7 @@
 #define MSR_K7_PERFCTR3            0xC0010007
 #define MSR_K8_TOP_MEM1		   0xC001001A
 #define MSR_K8_TOP_MEM2		   0xC001001D
-#define MSR_K8_SYSCFG		   0xC0000010	
+#define MSR_K8_SYSCFG		   0xC0010010
 
 /* K6 MSRs */
 #define MSR_K6_EFER			0xC0000080
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index eeb3088..9c4527e 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -22,11 +22,9 @@
 extern int no_iommu, force_iommu;
 
 extern unsigned long pci_mem_start;
-#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_IO		0x4000
 #define PCIBIOS_MIN_MEM		(pci_mem_start)
 
-#define PCIBIOS_MIN_CARDBUS_IO	0x4000
-
 void pcibios_config_init(void);
 struct pci_bus * pcibios_scan_root(int bus);
 extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
index 4eec176..4e167b5 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86_64/pgtable.h
@@ -176,6 +176,8 @@
 	(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_PCD)
 #define __PAGE_KERNEL_LARGE \
 	(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC \
+	(__PAGE_KERNEL_EXEC | _PAGE_PSE)
 
 #define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL)
 
diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h
index aeb1b73..de8b57b 100644
--- a/include/asm-x86_64/smp.h
+++ b/include/asm-x86_64/smp.h
@@ -46,12 +46,12 @@
 extern void lock_ipi_call_lock(void);
 extern void unlock_ipi_call_lock(void);
 extern int smp_num_siblings;
-extern void smp_flush_tlb(void);
-extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
 extern void smp_send_reschedule(int cpu);
-extern void smp_invalidate_rcv(void);		/* Process an NMI */
 extern void zap_low_mappings(void);
 void smp_stop_cpu(void);
+extern int smp_call_function_single(int cpuid, void (*func) (void *info),
+				void *info, int retry, int wait);
+
 extern cpumask_t cpu_sibling_map[NR_CPUS];
 extern cpumask_t cpu_core_map[NR_CPUS];
 extern u8 phys_proc_id[NR_CPUS];
diff --git a/include/asm-x86_64/system.h b/include/asm-x86_64/system.h
index 7616573..8606e17 100644
--- a/include/asm-x86_64/system.h
+++ b/include/asm-x86_64/system.h
@@ -116,12 +116,12 @@
 /*
  * Alternative inline assembly with input.
  * 
- * Pecularities:
+ * Peculiarities:
  * No memory clobber here. 
  * Argument numbers start with 1.
  * Best is to use constraints that are fixed size (like (%1) ... "r")
  * If you use variable sized constraints like "m" or "g" in the 
- * replacement maake sure to pad to the worst case length.
+ * replacement make sure to pad to the worst case length.
  */
 #define alternative_input(oldinstr, newinstr, feature, input...)	\
 	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
@@ -335,9 +335,6 @@
 void disable_hlt(void);
 void enable_hlt(void);
 
-#define HAVE_EAT_KEY
-void eat_key(void);
-
 extern unsigned long arch_align_stack(unsigned long sp);
 
 #endif
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h
index 0617423..505b0cf 100644
--- a/include/asm-x86_64/tlbflush.h
+++ b/include/asm-x86_64/tlbflush.h
@@ -56,8 +56,9 @@
  *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
  *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
  *
- * ..but the x86_64 has somewhat limited tlb flushing capabilities,
- * and page-granular flushes are available only on i486 and up.
+ * x86-64 can only flush individual pages or full VMs. For a range flush
+ * we always do the full VM. Might be worth trying if for a small
+ * range a few INVLPGs in a row are a win.
  */
 
 #ifndef CONFIG_SMP
@@ -115,7 +116,9 @@
 static inline void flush_tlb_pgtables(struct mm_struct *mm,
 				      unsigned long start, unsigned long end)
 {
-	/* x86_64 does not keep any page table caches in TLB */
+	/* x86_64 does not keep any page table caches in a software TLB.
+	   The CPUs do in their hardware TLBs, but they are handled
+	   by the normal TLB flushing algorithms. */
 }
 
 #endif /* _X8664_TLBFLUSH_H */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index f85cbe9..b46a520 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -453,9 +453,7 @@
  * If this matches the last registration, any IRQ resources for gsi
  * are freed.
  */
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
 void acpi_unregister_gsi (u32 gsi);
-#endif
 
 #ifdef CONFIG_ACPI_PCI
 
@@ -480,9 +478,7 @@
 int acpi_pci_irq_enable (struct pci_dev *dev);
 void acpi_penalize_isa_irq(int irq, int active);
 
-#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
 void acpi_pci_irq_disable (struct pci_dev *dev);
-#endif
 
 struct acpi_pci_driver {
 	struct acpi_pci_driver *next;
diff --git a/include/linux/dcookies.h b/include/linux/dcookies.h
index c280501..1d68428 100644
--- a/include/linux/dcookies.h
+++ b/include/linux/dcookies.h
@@ -48,12 +48,12 @@
 
 #else
 
-struct dcookie_user * dcookie_register(void)
+static inline struct dcookie_user * dcookie_register(void)
 {
 	return NULL;
 }
 
-void dcookie_unregister(struct dcookie_user * user)
+static inline void dcookie_unregister(struct dcookie_user * user)
 {
 	return;
 }
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index d07a92c..e96a430 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -21,7 +21,7 @@
  */
 static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
 				 const char *old_name, const char *new_name,
-				 int isdir)
+				 int isdir, struct inode *target)
 {
 	u32 cookie = inotify_get_cookie();
 
@@ -36,6 +36,11 @@
 		isdir = IN_ISDIR;
 	inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir,cookie,old_name);
 	inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name);
+
+	if (target) {
+		inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL);
+		inotify_inode_is_dead(target);
+	}
 }
 
 /*
diff --git a/include/linux/input.h b/include/linux/input.h
index b9cc0ac..bdc53c6 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -811,9 +811,9 @@
 
 	void *private;
 
-	char *name;
-	char *phys;
-	char *uniq;
+	const char *name;
+	const char *phys;
+	const char *uniq;
 	struct input_id id;
 
 	unsigned long evbit[NBITS(EV_MAX)];
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 6eb7f48..82d7024 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -625,10 +625,16 @@
  * Used to decide whether a process gets delivered SIGBUS or
  * just gets major/minor fault counters bumped up.
  */
-#define VM_FAULT_OOM	(-1)
-#define VM_FAULT_SIGBUS	0
-#define VM_FAULT_MINOR	1
-#define VM_FAULT_MAJOR	2
+#define VM_FAULT_OOM	0x00
+#define VM_FAULT_SIGBUS	0x01
+#define VM_FAULT_MINOR	0x02
+#define VM_FAULT_MAJOR	0x03
+
+/* 
+ * Special case for get_user_pages.
+ * Must be in a distinct bit from the above VM_FAULT_ flags.
+ */
+#define VM_FAULT_WRITE	0x10
 
 #define offset_in_page(p)	((unsigned long)(p) & ~PAGE_MASK)
 
@@ -704,7 +710,13 @@
 extern pte_t *FASTCALL(pte_alloc_map(struct mm_struct *mm, pmd_t *pmd, unsigned long address));
 extern int install_page(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, struct page *page, pgprot_t prot);
 extern int install_file_pte(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long addr, unsigned long pgoff, pgprot_t prot);
-extern int handle_mm_fault(struct mm_struct *mm,struct vm_area_struct *vma, unsigned long address, int write_access);
+extern int __handle_mm_fault(struct mm_struct *mm,struct vm_area_struct *vma, unsigned long address, int write_access);
+
+static inline int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, int write_access)
+{
+	return __handle_mm_fault(mm, vma, address, write_access) & (~VM_FAULT_WRITE);
+}
+
 extern int make_pages_present(unsigned long addr, unsigned long end);
 extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
 void install_arg_page(struct vm_area_struct *, struct page *, unsigned long);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 7ac1496..8621cf4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -971,6 +971,8 @@
 
 #define	isa_bridge	((struct pci_dev *)NULL)
 
+#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
+
 #else
 
 /*
@@ -985,9 +987,6 @@
 	return 0;
 }
 #endif
-
-#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
-
 #endif /* !CONFIG_PCI */
 
 /* these helpers provide future and backwards compatibility
diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h
index 6213e97..4bf1659 100644
--- a/include/linux/raid/bitmap.h
+++ b/include/linux/raid/bitmap.h
@@ -248,6 +248,7 @@
 
 /* these are used only by md/bitmap */
 int  bitmap_create(mddev_t *mddev);
+void bitmap_flush(mddev_t *mddev);
 void bitmap_destroy(mddev_t *mddev);
 int  bitmap_active(struct bitmap *bitmap);
 
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index 4c2c823..8487607 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -42,8 +42,7 @@
 	int			code;	/* UI_FF_UPLOAD, UI_FF_ERASE */
 
 	int			retval;
-	wait_queue_head_t	waitq;
-	int			completed;
+	struct completion	done;
 
 	union {
 		int		effect_id;
@@ -62,7 +61,7 @@
 
 	struct uinput_request	*requests[UINPUT_NUM_REQUESTS];
 	wait_queue_head_t	requests_waitq;
-	struct semaphore	requests_sem;
+	spinlock_t		requests_lock;
 };
 #endif	/* __KERNEL__ */
 
diff --git a/include/linux/usb_input.h b/include/linux/usb_input.h
new file mode 100644
index 0000000..716e0cc
--- /dev/null
+++ b/include/linux/usb_input.h
@@ -0,0 +1,25 @@
+#ifndef __USB_INPUT_H
+#define __USB_INPUT_H
+
+/*
+ * Copyright (C) 2005 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <asm/byteorder.h>
+
+static inline void
+usb_to_input_id(const struct usb_device *dev, struct input_id *id)
+{
+	id->bustype = BUS_USB;
+	id->vendor = le16_to_cpu(dev->descriptor.idVendor);
+	id->product = le16_to_cpu(dev->descriptor.idProduct);
+	id->version = le16_to_cpu(dev->descriptor.bcdDevice);
+}
+
+#endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
index d8c0a55..eeaa15d 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -1,5 +1,5 @@
 
-/* $Id: tuner.h,v 1.42 2005/07/06 09:42:19 mchehab Exp $
+/* $Id: tuner.h,v 1.45 2005/07/28 18:41:21 mchehab Exp $
  *
     tuner.h - definition for different tuners
 
@@ -108,6 +108,8 @@
 
 #define TUNER_TEA5767         62	/* Only FM Radio Tuner */
 #define TUNER_PHILIPS_FMD1216ME_MK3 63
+#define TUNER_LG_TDVS_H062F   64	/* DViCO FusionHDTV 5 */
+#define TUNER_YMEC_TVF66T5_B_DFF 65	/* Acorp Y878F */
 
 #define NOTUNER 0
 #define PAL     1	/* PAL_BG */
diff --git a/include/net/tcp.h b/include/net/tcp.h
index f4f9aba..5010f0c 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1236,7 +1236,7 @@
 	tp->left_out = tp->sacked_out + tp->lost_out;
 }
 
-/* Set slow start threshould and cwnd not falling to slow start */
+/* Set slow start threshold and cwnd not falling to slow start */
 static inline void __tcp_enter_cwr(struct tcp_sock *tp)
 {
 	tp->undo_marker = 0;
diff --git a/include/sound/core.h b/include/sound/core.h
index f8c4ef0a..38b357f 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -126,25 +126,26 @@
 	struct snd_monitor_file *next;
 };
 
-struct snd_shutdown_f_ops;	/* define it later */
+struct snd_shutdown_f_ops;	/* define it later in init.c */
 
 /* main structure for soundcard */
 
 struct _snd_card {
-	int number;			/* number of soundcard (index to snd_cards) */
+	int number;			/* number of soundcard (index to
+								snd_cards) */
 
 	char id[16];			/* id string of this card */
 	char driver[16];		/* driver name */
 	char shortname[32];		/* short name of this soundcard */
 	char longname[80];		/* name of this soundcard */
 	char mixername[80];		/* mixer name */
-	char components[80];		/* card components delimited with space */
-
+	char components[80];		/* card components delimited with
+								space */
 	struct module *module;		/* top-level module */
 
 	void *private_data;		/* private data for soundcard */
-	void (*private_free) (snd_card_t *card); /* callback for freeing of private data */
-
+	void (*private_free) (snd_card_t *card); /* callback for freeing of
+								private data */
 	struct list_head devices;	/* devices */
 
 	unsigned int last_numid;	/* last used numeric ID */
@@ -160,7 +161,8 @@
 	struct proc_dir_entry *proc_root_link;	/* number link to real id */
 
 	struct snd_monitor_file *files; /* all files associated to this card */
-	struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown state */
+	struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown
+								state */
 	spinlock_t files_lock;		/* lock the files for this card */
 	int shutdown;			/* this card is going down */
 	wait_queue_head_t shutdown_sleep;
@@ -196,8 +198,6 @@
 	up(&card->power_lock);
 }
 
-int snd_power_wait(snd_card_t *card, unsigned int power_state, struct file *file);
-
 static inline unsigned int snd_power_get_state(snd_card_t *card)
 {
 	return card->power_state;
@@ -208,6 +208,10 @@
 	card->power_state = state;
 	wake_up(&card->power_sleep);
 }
+
+/* init.c */
+int snd_power_wait(snd_card_t *card, unsigned int power_state, struct file *file);
+
 int snd_card_set_pm_callback(snd_card_t *card,
 			     int (*suspend)(snd_card_t *, pm_message_t),
 			     int (*resume)(snd_card_t *),
@@ -238,15 +242,14 @@
 
 #endif /* CONFIG_PM */
 
-/* device.c */
-
 struct _snd_minor {
 	struct list_head list;		/* list of all minors per card */
 	int number;			/* minor number */
 	int device;			/* device number */
 	const char *comment;		/* for /proc/asound/devices */
 	struct file_operations *f_ops;	/* file operations */
-	char name[0];			/* device name (keep at the end of structure) */
+	char name[0];			/* device name (keep at the end of
+								structure) */
 };
 
 typedef struct _snd_minor snd_minor_t;
@@ -287,12 +290,12 @@
 void snd_memory_done(void);
 int snd_memory_info_init(void);
 int snd_memory_info_done(void);
-void *snd_hidden_kmalloc(size_t size, int flags);
-void *snd_hidden_kcalloc(size_t n, size_t size, int flags);
+void *snd_hidden_kmalloc(size_t size, unsigned int __nocast flags);
+void *snd_hidden_kcalloc(size_t n, size_t size, unsigned int __nocast flags);
 void snd_hidden_kfree(const void *obj);
 void *snd_hidden_vmalloc(unsigned long size);
 void snd_hidden_vfree(void *obj);
-char *snd_hidden_kstrdup(const char *s, int flags);
+char *snd_hidden_kstrdup(const char *s, unsigned int __nocast flags);
 #define kmalloc(size, flags) snd_hidden_kmalloc(size, flags)
 #define kcalloc(n, size, flags) snd_hidden_kcalloc(n, size, flags)
 #define kfree(obj) snd_hidden_kfree(obj)
@@ -411,7 +414,7 @@
 	printk(fmt ,##args)
 #endif
 /**
- * snd_assert - run-time assersion macro
+ * snd_assert - run-time assertion macro
  * @expr: expression
  * @args...: the action
  *
@@ -427,7 +430,7 @@
 	}\
 } while (0)
 /**
- * snd_runtime_check - run-time assersion macro
+ * snd_runtime_check - run-time assertion macro
  * @expr: expression
  * @args...: the action
  *
diff --git a/include/sound/driver.h b/include/sound/driver.h
index 948e9a1..0d12456 100644
--- a/include/sound/driver.h
+++ b/include/sound/driver.h
@@ -51,7 +51,7 @@
 #ifdef CONFIG_SND_DEBUG_MEMORY
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
-void *snd_wrapper_kmalloc(size_t, int);
+void *snd_wrapper_kmalloc(size_t, unsigned int __nocast);
 #undef kmalloc
 void snd_wrapper_kfree(const void *);
 #undef kfree
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
index c50b919..c2ef3f0 100644
--- a/include/sound/emu10k1.h
+++ b/include/sound/emu10k1.h
@@ -1167,6 +1167,7 @@
 		       unsigned short extout_mask,
 		       long max_cache_bytes,
 		       int enable_ir,
+		       uint subsystem,
 		       emu10k1_t ** remu);
 
 int snd_emu10k1_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
diff --git a/include/sound/version.h b/include/sound/version.h
index 46acfa8..c085136 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
 /* include/version.h.  Generated by configure.  */
-#define CONFIG_SND_VERSION "1.0.9"
-#define CONFIG_SND_DATE " (Sun May 29 07:31:02 2005 UTC)"
+#define CONFIG_SND_VERSION "1.0.9b"
+#define CONFIG_SND_DATE " (Thu Jul 28 12:20:13 2005 UTC)"
diff --git a/init/main.c b/init/main.c
index b5e421e..c9c311c 100644
--- a/init/main.c
+++ b/init/main.c
@@ -51,6 +51,7 @@
 #include <asm/io.h>
 #include <asm/bugs.h>
 #include <asm/setup.h>
+#include <asm/sections.h>
 
 /*
  * This is one of the first .c files built. Error out early
@@ -323,8 +324,6 @@
 {
 	unsigned long size, i;
 	char *ptr;
-	/* Created by linker magic */
-	extern char __per_cpu_start[], __per_cpu_end[];
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
diff --git a/ipc/shm.c b/ipc/shm.c
index cce02243..1d6cf08 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -170,7 +170,7 @@
 	.open	= shm_open,	/* callback for a new vm-area open */
 	.close	= shm_close,	/* callback for when the vm-area is released */
 	.nopage	= shmem_nopage,
-#ifdef CONFIG_NUMA
+#if defined(CONFIG_NUMA) && defined(CONFIG_SHMEM)
 	.set_policy = shmem_set_policy,
 	.get_policy = shmem_get_policy,
 #endif
diff --git a/kernel/module.c b/kernel/module.c
index 068e271..c32995f 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -250,13 +250,18 @@
 /* Created by linker magic */
 extern char __per_cpu_start[], __per_cpu_end[];
 
-static void *percpu_modalloc(unsigned long size, unsigned long align)
+static void *percpu_modalloc(unsigned long size, unsigned long align,
+			     const char *name)
 {
 	unsigned long extra;
 	unsigned int i;
 	void *ptr;
 
-	BUG_ON(align > SMP_CACHE_BYTES);
+	if (align > SMP_CACHE_BYTES) {
+		printk(KERN_WARNING "%s: per-cpu alignment %li > %i\n",
+		       name, align, SMP_CACHE_BYTES);
+		align = SMP_CACHE_BYTES;
+	}
 
 	ptr = __per_cpu_start;
 	for (i = 0; i < pcpu_num_used; ptr += block_size(pcpu_size[i]), i++) {
@@ -348,7 +353,8 @@
 }	
 __initcall(percpu_modinit);
 #else /* ... !CONFIG_SMP */
-static inline void *percpu_modalloc(unsigned long size, unsigned long align)
+static inline void *percpu_modalloc(unsigned long size, unsigned long align,
+				    const char *name)
 {
 	return NULL;
 }
@@ -1644,7 +1650,8 @@
 	if (pcpuindex) {
 		/* We have a special allocation for this section. */
 		percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
-					 sechdrs[pcpuindex].sh_addralign);
+					 sechdrs[pcpuindex].sh_addralign,
+					 mod->name);
 		if (!percpu) {
 			err = -ENOMEM;
 			goto free_mod;
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 5b7b473..10b2ad7 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -896,21 +896,10 @@
 			jiffies_64_f = get_jiffies_64();
 		}
 		/*
-		 * Take away now to get delta
+		 * Take away now to get delta and normalize
 		 */
-		oc.tv_sec -= now.tv_sec;
-		oc.tv_nsec -= now.tv_nsec;
-		/*
-		 * Normalize...
-		 */
-		while ((oc.tv_nsec - NSEC_PER_SEC) >= 0) {
-			oc.tv_nsec -= NSEC_PER_SEC;
-			oc.tv_sec++;
-		}
-		while ((oc.tv_nsec) < 0) {
-			oc.tv_nsec += NSEC_PER_SEC;
-			oc.tv_sec--;
-		}
+		set_normalized_timespec(&oc, oc.tv_sec - now.tv_sec,
+					oc.tv_nsec - now.tv_nsec);
 	}else{
 		jiffies_64_f = get_jiffies_64();
 	}
diff --git a/kernel/sys.c b/kernel/sys.c
index 8f25525..0bcaed6 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -392,7 +392,6 @@
 	}
 	notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
 	system_state = SYSTEM_RESTART;
-	device_suspend(PMSG_FREEZE);
 	device_shutdown();
 	printk(KERN_EMERG "Starting new kernel\n");
 	machine_shutdown();
@@ -405,7 +404,6 @@
 {
 	notifier_call_chain(&reboot_notifier_list, SYS_HALT, NULL);
 	system_state = SYSTEM_HALT;
-	device_suspend(PMSG_SUSPEND);
 	device_shutdown();
 	printk(KERN_EMERG "System halted.\n");
 	machine_halt();
@@ -416,7 +414,6 @@
 {
 	notifier_call_chain(&reboot_notifier_list, SYS_POWER_OFF, NULL);
 	system_state = SYSTEM_POWER_OFF;
-	device_suspend(PMSG_SUSPEND);
 	device_shutdown();
 	printk(KERN_EMERG "Power down.\n");
 	machine_power_off();
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 42b40ae..1ab2370 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -79,7 +79,6 @@
 cond_syscall(sys_keyctl);
 cond_syscall(compat_sys_keyctl);
 cond_syscall(compat_sys_socketcall);
-cond_syscall(sys_set_zone_reclaim);
 cond_syscall(sys_inotify_init);
 cond_syscall(sys_inotify_add_watch);
 cond_syscall(sys_inotify_rm_watch);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0c42129..299f7f3 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -141,7 +141,7 @@
 
 config DEBUG_FS
 	bool "Debug Filesystem"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && SYSFS
 	help
 	  debugfs is a virtual file system that kernel developers use to put
 	  debugging files into.  Enable this option to be able to read and
diff --git a/mm/memory.c b/mm/memory.c
index 6fe77ac..e046b7e 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -913,9 +913,13 @@
 			pud = pud_offset(pgd, pg);
 			BUG_ON(pud_none(*pud));
 			pmd = pmd_offset(pud, pg);
-			BUG_ON(pmd_none(*pmd));
+			if (pmd_none(*pmd))
+				return i ? : -EFAULT;
 			pte = pte_offset_map(pmd, pg);
-			BUG_ON(pte_none(*pte));
+			if (pte_none(*pte)) {
+				pte_unmap(pte);
+				return i ? : -EFAULT;
+			}
 			if (pages) {
 				pages[i] = pte_page(*pte);
 				get_page(pages[i]);
@@ -940,11 +944,13 @@
 		}
 		spin_lock(&mm->page_table_lock);
 		do {
+			int write_access = write;
 			struct page *page;
-			int lookup_write = write;
 
 			cond_resched_lock(&mm->page_table_lock);
-			while (!(page = follow_page(mm, start, lookup_write))) {
+			while (!(page = follow_page(mm, start, write_access))) {
+				int ret;
+
 				/*
 				 * Shortcut for anonymous pages. We don't want
 				 * to force the creation of pages tables for
@@ -952,13 +958,23 @@
 				 * nobody touched so far. This is important
 				 * for doing a core dump for these mappings.
 				 */
-				if (!lookup_write &&
-				    untouched_anonymous_page(mm,vma,start)) {
+				if (!write && untouched_anonymous_page(mm,vma,start)) {
 					page = ZERO_PAGE(start);
 					break;
 				}
 				spin_unlock(&mm->page_table_lock);
-				switch (handle_mm_fault(mm,vma,start,write)) {
+				ret = __handle_mm_fault(mm, vma, start, write_access);
+
+				/*
+				 * The VM_FAULT_WRITE bit tells us that do_wp_page has
+				 * broken COW when necessary, even if maybe_mkwrite
+				 * decided not to set pte_write. We can thus safely do
+				 * subsequent page lookups as if they were reads.
+				 */
+				if (ret & VM_FAULT_WRITE)
+					write_access = 0;
+				
+				switch (ret & ~VM_FAULT_WRITE) {
 				case VM_FAULT_MINOR:
 					tsk->min_flt++;
 					break;
@@ -972,14 +988,6 @@
 				default:
 					BUG();
 				}
-				/*
-				 * Now that we have performed a write fault
-				 * and surely no longer have a shared page we
-				 * shouldn't write, we shouldn't ignore an
-				 * unwritable page in the page table if
-				 * we are forcing write access.
-				 */
-				lookup_write = write && !force;
 				spin_lock(&mm->page_table_lock);
 			}
 			if (pages) {
@@ -1229,6 +1237,7 @@
 	struct page *old_page, *new_page;
 	unsigned long pfn = pte_pfn(pte);
 	pte_t entry;
+	int ret;
 
 	if (unlikely(!pfn_valid(pfn))) {
 		/*
@@ -1256,7 +1265,7 @@
 			lazy_mmu_prot_update(entry);
 			pte_unmap(page_table);
 			spin_unlock(&mm->page_table_lock);
-			return VM_FAULT_MINOR;
+			return VM_FAULT_MINOR|VM_FAULT_WRITE;
 		}
 	}
 	pte_unmap(page_table);
@@ -1283,6 +1292,7 @@
 	/*
 	 * Re-check the pte - we dropped the lock
 	 */
+	ret = VM_FAULT_MINOR;
 	spin_lock(&mm->page_table_lock);
 	page_table = pte_offset_map(pmd, address);
 	if (likely(pte_same(*page_table, pte))) {
@@ -1299,12 +1309,13 @@
 
 		/* Free the old page.. */
 		new_page = old_page;
+		ret |= VM_FAULT_WRITE;
 	}
 	pte_unmap(page_table);
 	page_cache_release(new_page);
 	page_cache_release(old_page);
 	spin_unlock(&mm->page_table_lock);
-	return VM_FAULT_MINOR;
+	return ret;
 
 no_new_page:
 	page_cache_release(old_page);
@@ -1996,7 +2007,6 @@
 	if (write_access) {
 		if (!pte_write(entry))
 			return do_wp_page(mm, vma, address, pte, pmd, entry);
-
 		entry = pte_mkdirty(entry);
 	}
 	entry = pte_mkyoung(entry);
@@ -2011,7 +2021,7 @@
 /*
  * By the time we get here, we already hold the mm semaphore
  */
-int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct * vma,
+int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct * vma,
 		unsigned long address, int write_access)
 {
 	pgd_t *pgd;
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 1694845..b4eabab 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -443,7 +443,7 @@
 	struct mempolicy *new;
 	DECLARE_BITMAP(nodes, MAX_NUMNODES);
 
-	if (mode > MPOL_MAX)
+	if (mode < 0 || mode > MPOL_MAX)
 		return -EINVAL;
 	err = get_nodes(nodes, nmask, maxnode, mode);
 	if (err)
diff --git a/mm/mremap.c b/mm/mremap.c
index ec7238a..fc45dc9 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -229,6 +229,7 @@
 	 * since do_munmap() will decrement it by old_len == new_len
 	 */
 	mm->total_vm += new_len >> PAGE_SHIFT;
+	__vm_stat_account(mm, vma->vm_flags, vma->vm_file, new_len>>PAGE_SHIFT);
 
 	if (do_munmap(mm, old_addr, old_len) < 0) {
 		/* OOM: unable to split vma, just get accounts right */
@@ -243,7 +244,6 @@
 			vma->vm_next->vm_flags |= VM_ACCOUNT;
 	}
 
-	__vm_stat_account(mm, vma->vm_flags, vma->vm_file, new_len>>PAGE_SHIFT);
 	if (vm_flags & VM_LOCKED) {
 		mm->locked_vm += new_len >> PAGE_SHIFT;
 		if (new_len > old_len)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 42bccfb..8d08837 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1061,20 +1061,19 @@
 
 static unsigned int nr_free_zone_pages(int offset)
 {
-	pg_data_t *pgdat;
+	/* Just pick one node, since fallback list is circular */
+	pg_data_t *pgdat = NODE_DATA(numa_node_id());
 	unsigned int sum = 0;
 
-	for_each_pgdat(pgdat) {
-		struct zonelist *zonelist = pgdat->node_zonelists + offset;
-		struct zone **zonep = zonelist->zones;
-		struct zone *zone;
+	struct zonelist *zonelist = pgdat->node_zonelists + offset;
+	struct zone **zonep = zonelist->zones;
+	struct zone *zone;
 
-		for (zone = *zonep++; zone; zone = *zonep++) {
-			unsigned long size = zone->present_pages;
-			unsigned long high = zone->pages_high;
-			if (size > high)
-				sum += size - high;
-		}
+	for (zone = *zonep++; zone; zone = *zonep++) {
+		unsigned long size = zone->present_pages;
+		unsigned long high = zone->pages_high;
+		if (size > high)
+			sum += size - high;
 	}
 
 	return sum;
diff --git a/net/core/dev.c b/net/core/dev.c
index ff9dc02..52a3bf7a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -901,8 +901,7 @@
 	smp_mb__after_clear_bit(); /* Commit netif_running(). */
 	while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) {
 		/* No hurry. */
-		current->state = TASK_INTERRUPTIBLE;
-		schedule_timeout(1);
+		msleep(1);
 	}
 
 	/*
diff --git a/net/core/dst.c b/net/core/dst.c
index fc434ad..334790d 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -45,6 +45,7 @@
 static void dst_run_gc(unsigned long dummy)
 {
 	int    delayed = 0;
+	int    work_performed;
 	struct dst_entry * dst, **dstp;
 
 	if (!spin_trylock(&dst_lock)) {
@@ -52,9 +53,9 @@
 		return;
 	}
 
-
 	del_timer(&dst_gc_timer);
 	dstp = &dst_garbage_list;
+	work_performed = 0;
 	while ((dst = *dstp) != NULL) {
 		if (atomic_read(&dst->__refcnt)) {
 			dstp = &dst->next;
@@ -62,6 +63,7 @@
 			continue;
 		}
 		*dstp = dst->next;
+		work_performed = 1;
 
 		dst = dst_destroy(dst);
 		if (dst) {
@@ -86,9 +88,14 @@
 		dst_gc_timer_inc = DST_GC_MAX;
 		goto out;
 	}
-	if ((dst_gc_timer_expires += dst_gc_timer_inc) > DST_GC_MAX)
-		dst_gc_timer_expires = DST_GC_MAX;
-	dst_gc_timer_inc += DST_GC_INC;
+	if (!work_performed) {
+		if ((dst_gc_timer_expires += dst_gc_timer_inc) > DST_GC_MAX)
+			dst_gc_timer_expires = DST_GC_MAX;
+		dst_gc_timer_inc += DST_GC_INC;
+	} else {
+		dst_gc_timer_inc = DST_GC_INC;
+		dst_gc_timer_expires = DST_GC_MIN;
+	}
 	dst_gc_timer.expires = jiffies + dst_gc_timer_expires;
 #if RT_CACHE_DEBUG >= 2
 	printk("dst_total: %d/%d %ld\n",
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 8848355..f0d5740 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -290,7 +290,6 @@
 
 	dev_hold(dev);
 	ipgre_tunnel_link(nt);
-	/* Do not decrement MOD_USE_COUNT here. */
 	return nt;
 
 failed:
@@ -1277,12 +1276,28 @@
 	goto out;
 }
 
-static void ipgre_fini(void)
+static void __exit ipgre_destroy_tunnels(void)
+{
+	int prio;
+
+	for (prio = 0; prio < 4; prio++) {
+		int h;
+		for (h = 0; h < HASH_SIZE; h++) {
+			struct ip_tunnel *t;
+			while ((t = tunnels[prio][h]) != NULL)
+				unregister_netdevice(t->dev);
+		}
+	}
+}
+
+static void __exit ipgre_fini(void)
 {
 	if (inet_del_protocol(&ipgre_protocol, IPPROTO_GRE) < 0)
 		printk(KERN_INFO "ipgre close: can't remove protocol\n");
 
-	unregister_netdev(ipgre_fb_tunnel_dev);
+	rtnl_lock();
+	ipgre_destroy_tunnels();
+	rtnl_unlock();
 }
 
 module_init(ipgre_init);
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index c3947cd..c05c1df 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -255,7 +255,6 @@
 
 	dev_hold(dev);
 	ipip_tunnel_link(nt);
-	/* Do not decrement MOD_USE_COUNT here. */
 	return nt;
 
 failed:
@@ -920,12 +919,29 @@
 	goto out;
 }
 
+static void __exit ipip_destroy_tunnels(void)
+{
+	int prio;
+
+	for (prio = 1; prio < 4; prio++) {
+		int h;
+		for (h = 0; h < HASH_SIZE; h++) {
+			struct ip_tunnel *t;
+			while ((t = tunnels[prio][h]) != NULL)
+				unregister_netdevice(t->dev);
+		}
+	}
+}
+
 static void __exit ipip_fini(void)
 {
 	if (ipip_unregister() < 0)
 		printk(KERN_INFO "ipip close: can't deregister tunnel\n");
 
-	unregister_netdev(ipip_fb_tunnel_dev);
+	rtnl_lock();
+	ipip_destroy_tunnels();
+	unregister_netdevice(ipip_fb_tunnel_dev);
+	rtnl_unlock();
 }
 
 module_init(ipip_init);
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 7833d92..dc806b5 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -362,7 +362,7 @@
 
 /* Fill oifs list. It is called under write locked mrt_lock. */
 
-static void ipmr_update_threshoulds(struct mfc_cache *cache, unsigned char *ttls)
+static void ipmr_update_thresholds(struct mfc_cache *cache, unsigned char *ttls)
 {
 	int vifi;
 
@@ -727,7 +727,7 @@
 	if (c != NULL) {
 		write_lock_bh(&mrt_lock);
 		c->mfc_parent = mfc->mfcc_parent;
-		ipmr_update_threshoulds(c, mfc->mfcc_ttls);
+		ipmr_update_thresholds(c, mfc->mfcc_ttls);
 		if (!mrtsock)
 			c->mfc_flags |= MFC_STATIC;
 		write_unlock_bh(&mrt_lock);
@@ -744,7 +744,7 @@
 	c->mfc_origin=mfc->mfcc_origin.s_addr;
 	c->mfc_mcastgrp=mfc->mfcc_mcastgrp.s_addr;
 	c->mfc_parent=mfc->mfcc_parent;
-	ipmr_update_threshoulds(c, mfc->mfcc_ttls);
+	ipmr_update_thresholds(c, mfc->mfcc_ttls);
 	if (!mrtsock)
 		c->mfc_flags |= MFC_STATIC;
 
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index 86f04e4..a7f0c82 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -513,6 +513,11 @@
 #ifdef CONFIG_IP_NF_CONNTRACK_MARK
 		conntrack->mark = exp->master->mark;
 #endif
+#if defined(CONFIG_IP_NF_TARGET_MASQUERADE) || \
+    defined(CONFIG_IP_NF_TARGET_MASQUERADE_MODULE)
+		/* this is ugly, but there is no other place where to put it */
+		conntrack->nat.masq_index = exp->master->nat.masq_index;
+#endif
 		nf_conntrack_get(&conntrack->master->ct_general);
 		CONNTRACK_STAT_INC(expect_new);
 	} else {
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index b788f55..e553e5b 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -195,7 +195,6 @@
 	dev_hold(dev);
 
 	ipip6_tunnel_link(nt);
-	/* Do not decrement MOD_USE_COUNT here. */
 	return nt;
 
 failed:
@@ -794,10 +793,28 @@
 	.err_handler	=	ipip6_err,
 };
 
+static void __exit sit_destroy_tunnels(void)
+{
+	int prio;
+
+	for (prio = 1; prio < 4; prio++) {
+		int h;
+		for (h = 0; h < HASH_SIZE; h++) {
+			struct ip_tunnel *t;
+			while ((t = tunnels[prio][h]) != NULL)
+				unregister_netdevice(t->dev);
+		}
+	}
+}
+
 void __exit sit_cleanup(void)
 {
 	inet_del_protocol(&sit_protocol, IPPROTO_IPV6);
-	unregister_netdev(ipip6_fb_tunnel_dev);
+
+	rtnl_lock();
+	sit_destroy_tunnels();
+	unregister_netdevice(ipip6_fb_tunnel_dev);
+	rtnl_unlock();
 }
 
 int __init sit_init(void)
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index ad6b120..9f5aabd 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -178,17 +178,31 @@
 }
 
 
+void replace_button_icon(GladeXML * xml, GdkDrawable * window,
+			 GtkStyle * style, gchar * btn_name, gchar ** xpm)
+{
+	GdkPixmap *pixmap;
+	GdkBitmap *mask;
+	GtkToolButton *button;
+	GtkWidget *image;
+
+	pixmap = gdk_pixmap_create_from_xpm_d(window, &mask,
+					      &style->bg[GTK_STATE_NORMAL],
+					      xpm);
+
+	button = GTK_TOOL_BUTTON(glade_xml_get_widget(xml, btn_name));
+	image = gtk_image_new_from_pixmap(pixmap, mask);
+	gtk_widget_show(image);
+	gtk_tool_button_set_icon_widget(button, image);
+}
+
 /* Main Window Initialization */
-
-
 void init_main_window(const gchar * glade_file)
 {
 	GladeXML *xml;
 	GtkWidget *widget;
 	GtkTextBuffer *txtbuf;
 	char title[256];
-	GdkPixmap *pixmap;
-	GdkBitmap *mask;
 	GtkStyle *style;
 
 	xml = glade_xml_new(glade_file, "window1", NULL);
@@ -221,36 +235,22 @@
 	style = gtk_widget_get_style(main_wnd);
 	widget = glade_xml_get_widget(xml, "toolbar1");
 
-	pixmap = gdk_pixmap_create_from_xpm_d(main_wnd->window, &mask,
-					      &style->bg[GTK_STATE_NORMAL],
-					      (gchar **) xpm_single_view);
-	gtk_image_set_from_pixmap(GTK_IMAGE
-				  (((GtkToolbarChild
-				     *) (g_list_nth(GTK_TOOLBAR(widget)->
-						    children,
-						    5)->data))->icon),
-				  pixmap, mask);
-	pixmap =
-	    gdk_pixmap_create_from_xpm_d(main_wnd->window, &mask,
-					 &style->bg[GTK_STATE_NORMAL],
-					 (gchar **) xpm_split_view);
-	gtk_image_set_from_pixmap(GTK_IMAGE
-				  (((GtkToolbarChild
-				     *) (g_list_nth(GTK_TOOLBAR(widget)->
-						    children,
-						    6)->data))->icon),
-				  pixmap, mask);
-	pixmap =
-	    gdk_pixmap_create_from_xpm_d(main_wnd->window, &mask,
-					 &style->bg[GTK_STATE_NORMAL],
-					 (gchar **) xpm_tree_view);
-	gtk_image_set_from_pixmap(GTK_IMAGE
-				  (((GtkToolbarChild
-				     *) (g_list_nth(GTK_TOOLBAR(widget)->
-						    children,
-						    7)->data))->icon),
-				  pixmap, mask);
+#if 0	/* Use stock Gtk icons instead */
+	replace_button_icon(xml, main_wnd->window, style,
+			    "button1", (gchar **) xpm_back);
+	replace_button_icon(xml, main_wnd->window, style,
+			    "button2", (gchar **) xpm_load);
+	replace_button_icon(xml, main_wnd->window, style,
+			    "button3", (gchar **) xpm_save);
+#endif
+	replace_button_icon(xml, main_wnd->window, style,
+			    "button4", (gchar **) xpm_single_view);
+	replace_button_icon(xml, main_wnd->window, style,
+			    "button5", (gchar **) xpm_split_view);
+	replace_button_icon(xml, main_wnd->window, style,
+			    "button6", (gchar **) xpm_tree_view);
 
+#if 0
 	switch (view_mode) {
 	case SINGLE_VIEW:
 		widget = glade_xml_get_widget(xml, "button4");
@@ -265,7 +265,7 @@
 		g_signal_emit_by_name(widget, "clicked");
 		break;
 	}
-
+#endif
 	txtbuf = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w));
 	tag1 = gtk_text_buffer_create_tag(txtbuf, "mytag1",
 					  "foreground", "red",
@@ -322,7 +322,7 @@
 	gtk_tree_view_set_model(view, model1);
 	gtk_tree_view_set_headers_visible(view, TRUE);
 	gtk_tree_view_set_rules_hint(view, FALSE);
-	
+
 	column = gtk_tree_view_column_new();
 	gtk_tree_view_append_column(view, column);
 	gtk_tree_view_column_set_title(column, _("Options"));
@@ -334,11 +334,11 @@
 					    renderer,
 					    "active", COL_BTNACT,
 					    "inconsistent", COL_BTNINC,
-					    "visible", COL_BTNVIS, 
+					    "visible", COL_BTNVIS,
 					    "radio", COL_BTNRAD, NULL);
 	renderer = gtk_cell_renderer_text_new();
 	gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column),
-					renderer, FALSE);	
+					renderer, FALSE);
 	gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column),
 					    renderer,
 					    "text", COL_OPTION,
@@ -386,7 +386,7 @@
 					    renderer,
 					    "active", COL_BTNACT,
 					    "inconsistent", COL_BTNINC,
-					    "visible", COL_BTNVIS, 
+					    "visible", COL_BTNVIS,
 					    "radio", COL_BTNRAD, NULL);
 	/*g_signal_connect(G_OBJECT(renderer), "toggled",
 	   G_CALLBACK(renderer_toggled), NULL); */
@@ -806,7 +806,7 @@
 }
 
 
-void on_back_pressed(GtkButton * button, gpointer user_data)
+void on_back_clicked(GtkButton * button, gpointer user_data)
 {
 	enum prop_type ptype;
 
@@ -821,13 +821,13 @@
 }
 
 
-void on_load_pressed(GtkButton * button, gpointer user_data)
+void on_load_clicked(GtkButton * button, gpointer user_data)
 {
 	on_load1_activate(NULL, user_data);
 }
 
 
-void on_save_pressed(GtkButton * button, gpointer user_data)
+void on_save_clicked(GtkButton * button, gpointer user_data)
 {
 	on_save1_activate(NULL, user_data);
 }
@@ -850,9 +850,12 @@
 	gtk_widget_show(tree1_w);
 	gtk_window_get_default_size(GTK_WINDOW(main_wnd), &w, &h);
 	gtk_paned_set_position(GTK_PANED(hpaned), w / 2);
-	if (tree2)	
+	if (tree2)
 		gtk_tree_store_clear(tree2);
 	display_list();
+
+	/* Disable back btn, like in full mode. */
+	gtk_widget_set_sensitive(back_btn, FALSE);
 }
 
 
@@ -868,13 +871,13 @@
 }
 
 
-void on_collapse_pressed(GtkButton * button, gpointer user_data)
+void on_collapse_clicked(GtkButton * button, gpointer user_data)
 {
 	gtk_tree_view_collapse_all(GTK_TREE_VIEW(tree2_w));
 }
 
 
-void on_expand_pressed(GtkButton * button, gpointer user_data)
+void on_expand_clicked(GtkButton * button, gpointer user_data)
 {
 	gtk_tree_view_expand_all(GTK_TREE_VIEW(tree2_w));
 }
@@ -1242,13 +1245,13 @@
 			row[COL_VALUE] =
 			    g_strdup(menu_get_prompt(def_menu));
 	}
-	if(sym->flags & SYMBOL_CHOICEVAL)
+	if (sym->flags & SYMBOL_CHOICEVAL)
 		row[COL_BTNRAD] = GINT_TO_POINTER(TRUE);
 
 	stype = sym_get_type(sym);
 	switch (stype) {
 	case S_BOOLEAN:
-		if(GPOINTER_TO_INT(row[COL_PIXVIS]) == FALSE)
+		if (GPOINTER_TO_INT(row[COL_PIXVIS]) == FALSE)
 			row[COL_BTNVIS] = GINT_TO_POINTER(TRUE);
 		if (sym_is_choice(sym))
 			break;
@@ -1423,7 +1426,7 @@
 								 child2);
 				gtk_tree_store_remove(tree2, &tmp);
 				if (!valid)
-					return;	// next parent 
+					return;	// next parent
 				else
 					goto reparse;	// next child
 			} else
@@ -1448,7 +1451,7 @@
 								 child2);
 				gtk_tree_store_remove(tree2, &tmp);
 				if (!valid)
-					return;	// next parent 
+					return;	// next parent
 				else
 					goto reparse;	// next child
 			}
@@ -1486,12 +1489,12 @@
 		if (sym)
 			sym->flags &= ~SYMBOL_CHANGED;
 
-		if ((view_mode == SPLIT_VIEW) && !(child->flags & MENU_ROOT) &&
-		    (tree == tree1))
+		if ((view_mode == SPLIT_VIEW)
+		    && !(child->flags & MENU_ROOT) && (tree == tree1))
 			continue;
 
-		if ((view_mode == SPLIT_VIEW) && (child->flags & MENU_ROOT) &&
-		    (tree == tree2))
+		if ((view_mode == SPLIT_VIEW) && (child->flags & MENU_ROOT)
+		    && (tree == tree2))
 			continue;
 
 		if (menu_is_visible(child) || show_all)
@@ -1513,11 +1516,12 @@
 		    && (tree == tree2))
 			continue;
 /*
-		if (((menu != &rootmenu) && !(menu->flags & MENU_ROOT)) ||
-		    (view_mode == FULL_VIEW)
+                if (((menu != &rootmenu) && !(menu->flags & MENU_ROOT))
+		    || (view_mode == FULL_VIEW)
 		    || (view_mode == SPLIT_VIEW))*/
 		if (((view_mode == SINGLE_VIEW) && (menu->flags & MENU_ROOT))
-		    || (view_mode == FULL_VIEW) || (view_mode == SPLIT_VIEW)) {
+		    || (view_mode == FULL_VIEW)
+		    || (view_mode == SPLIT_VIEW)) {
 			indent++;
 			display_tree(child);
 			indent--;
@@ -1530,9 +1534,9 @@
 {
 	if (tree2)
 		gtk_tree_store_clear(tree2);
-	if(view_mode == SINGLE_VIEW)
+	if (view_mode == SINGLE_VIEW)
 		display_tree(current);
- 	else if(view_mode == SPLIT_VIEW)
+	else if (view_mode == SPLIT_VIEW)
 		display_tree(browsed);
 	gtk_tree_view_expand_all(GTK_TREE_VIEW(tree2_w));
 }
@@ -1551,24 +1555,22 @@
 
 void fixup_rootmenu(struct menu *menu)
 {
-        struct menu *child;
-        static int menu_cnt = 0;
+	struct menu *child;
+	static int menu_cnt = 0;
 
-        menu->flags |= MENU_ROOT;
-        for (child = menu->list; child; child = child->next) {
-                if (child->prompt && child->prompt->type == P_MENU) {
-                        menu_cnt++;
-                        fixup_rootmenu(child);
-                        menu_cnt--;
-                } else if (!menu_cnt)
-                        fixup_rootmenu(child);
-        }
+	menu->flags |= MENU_ROOT;
+	for (child = menu->list; child; child = child->next) {
+		if (child->prompt && child->prompt->type == P_MENU) {
+			menu_cnt++;
+			fixup_rootmenu(child);
+			menu_cnt--;
+		} else if (!menu_cnt)
+			fixup_rootmenu(child);
+	}
 }
 
 
 /* Main */
-
-
 int main(int ac, char *av[])
 {
 	const char *name;
diff --git a/scripts/kconfig/gconf.glade b/scripts/kconfig/gconf.glade
index ace4706..f8744ed 100644
--- a/scripts/kconfig/gconf.glade
+++ b/scripts/kconfig/gconf.glade
@@ -13,6 +13,11 @@
   <property name="default_height">480</property>
   <property name="resizable">True</property>
   <property name="destroy_with_parent">False</property>
+  <property name="decorated">True</property>
+  <property name="skip_taskbar_hint">False</property>
+  <property name="skip_pager_hint">False</property>
+  <property name="type_hint">GDK_WINDOW_TYPE_HINT_NORMAL</property>
+  <property name="gravity">GDK_GRAVITY_NORTH_WEST</property>
   <signal name="destroy" handler="on_window1_destroy" object="window1"/>
   <signal name="size_request" handler="on_window1_size_request" object="vpaned1" last_modification_time="Fri, 11 Jan 2002 16:17:11 GMT"/>
   <signal name="delete_event" handler="on_window1_delete_event" object="window1" last_modification_time="Sun, 09 Mar 2003 19:42:46 GMT"/>
@@ -46,7 +51,7 @@
 		      <accelerator key="L" modifiers="GDK_CONTROL_MASK" signal="activate"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image27">
+			<widget class="GtkImage" id="image39">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-open</property>
 			  <property name="icon_size">1</property>
@@ -69,7 +74,7 @@
 		      <accelerator key="S" modifiers="GDK_CONTROL_MASK" signal="activate"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image28">
+			<widget class="GtkImage" id="image40">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-save</property>
 			  <property name="icon_size">1</property>
@@ -91,7 +96,7 @@
 		      <signal name="activate" handler="on_save_as1_activate"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image29">
+			<widget class="GtkImage" id="image41">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-save-as</property>
 			  <property name="icon_size">1</property>
@@ -105,7 +110,7 @@
 		  </child>
 
 		  <child>
-		    <widget class="GtkMenuItem" id="separator1">
+		    <widget class="GtkSeparatorMenuItem" id="separator1">
 		      <property name="visible">True</property>
 		    </widget>
 		  </child>
@@ -119,7 +124,7 @@
 		      <accelerator key="Q" modifiers="GDK_CONTROL_MASK" signal="activate"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image30">
+			<widget class="GtkImage" id="image42">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-quit</property>
 			  <property name="icon_size">1</property>
@@ -179,7 +184,7 @@
 		  </child>
 
 		  <child>
-		    <widget class="GtkMenuItem" id="separator2">
+		    <widget class="GtkSeparatorMenuItem" id="separator2">
 		      <property name="visible">True</property>
 		    </widget>
 		  </child>
@@ -228,7 +233,7 @@
 		      <accelerator key="I" modifiers="GDK_CONTROL_MASK" signal="activate"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image31">
+			<widget class="GtkImage" id="image43">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-dialog-question</property>
 			  <property name="icon_size">1</property>
@@ -250,7 +255,7 @@
 		      <accelerator key="A" modifiers="GDK_CONTROL_MASK" signal="activate"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image32">
+			<widget class="GtkImage" id="image44">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-properties</property>
 			  <property name="icon_size">1</property>
@@ -271,7 +276,7 @@
 		      <signal name="activate" handler="on_license1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/>
 
 		      <child internal-child="image">
-			<widget class="GtkImage" id="image33">
+			<widget class="GtkImage" id="image45">
 			  <property name="visible">True</property>
 			  <property name="stock">gtk-justify-fill</property>
 			  <property name="icon_size">1</property>
@@ -308,109 +313,207 @@
 	      <property name="orientation">GTK_ORIENTATION_HORIZONTAL</property>
 	      <property name="toolbar_style">GTK_TOOLBAR_BOTH</property>
 	      <property name="tooltips">True</property>
+	      <property name="show_arrow">True</property>
 
 	      <child>
-		<widget class="button" id="button1">
+		<widget class="GtkToolButton" id="button1">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Goes up of one level (single view)</property>
 		  <property name="label" translatable="yes">Back</property>
 		  <property name="use_underline">True</property>
-		  <property name="stock_pixmap">gtk-undo</property>
-		  <signal name="pressed" handler="on_back_pressed"/>
+		  <property name="stock_id">gtk-undo</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+		  <signal name="clicked" handler="on_back_clicked"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="GtkVSeparator" id="vseparator1">
+		<widget class="GtkToolItem" id="toolitem1">
 		  <property name="visible">True</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+
+		  <child>
+		    <widget class="GtkVSeparator" id="vseparator1">
+		      <property name="visible">True</property>
+		    </widget>
+		  </child>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">False</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button2">
+		<widget class="GtkToolButton" id="button2">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Load a config file</property>
 		  <property name="label" translatable="yes">Load</property>
 		  <property name="use_underline">True</property>
-		  <property name="stock_pixmap">gtk-open</property>
-		  <signal name="pressed" handler="on_load_pressed"/>
+		  <property name="stock_id">gtk-open</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+		  <signal name="clicked" handler="on_load_clicked"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button3">
+		<widget class="GtkToolButton" id="button3">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Save a config file</property>
 		  <property name="label" translatable="yes">Save</property>
 		  <property name="use_underline">True</property>
-		  <property name="stock_pixmap">gtk-save</property>
-		  <signal name="pressed" handler="on_save_pressed"/>
+		  <property name="stock_id">gtk-save</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+		  <signal name="clicked" handler="on_save_clicked"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="GtkVSeparator" id="vseparator2">
+		<widget class="GtkToolItem" id="toolitem2">
 		  <property name="visible">True</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+
+		  <child>
+		    <widget class="GtkVSeparator" id="vseparator2">
+		      <property name="visible">True</property>
+		    </widget>
+		  </child>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">False</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button4">
+		<widget class="GtkToolButton" id="button4">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Single view</property>
 		  <property name="label" translatable="yes">Single</property>
 		  <property name="use_underline">True</property>
-		  <property name="stock_pixmap">gtk-missing-image</property>
+		  <property name="stock_id">gtk-missing-image</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
 		  <signal name="clicked" handler="on_single_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:39 GMT"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button5">
+		<widget class="GtkToolButton" id="button5">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Split view</property>
 		  <property name="label" translatable="yes">Split</property>
 		  <property name="use_underline">True</property>
-		  <property name="stock_pixmap">gtk-missing-image</property>
+		  <property name="stock_id">gtk-missing-image</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
 		  <signal name="clicked" handler="on_split_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:45 GMT"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button6">
+		<widget class="GtkToolButton" id="button6">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Full view</property>
 		  <property name="label" translatable="yes">Full</property>
 		  <property name="use_underline">True</property>
-		  <property name="stock_pixmap">gtk-missing-image</property>
+		  <property name="stock_id">gtk-missing-image</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
 		  <signal name="clicked" handler="on_full_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:50 GMT"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="GtkVSeparator" id="vseparator3">
+		<widget class="GtkToolItem" id="toolitem3">
 		  <property name="visible">True</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+
+		  <child>
+		    <widget class="GtkVSeparator" id="vseparator3">
+		      <property name="visible">True</property>
+		    </widget>
+		  </child>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">False</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button7">
+		<widget class="GtkToolButton" id="button7">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Collapse the whole tree in the right frame</property>
 		  <property name="label" translatable="yes">Collapse</property>
 		  <property name="use_underline">True</property>
-		  <signal name="pressed" handler="on_collapse_pressed"/>
+		  <property name="stock_id">gtk-remove</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+		  <signal name="clicked" handler="on_collapse_clicked"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 
 	      <child>
-		<widget class="button" id="button8">
+		<widget class="GtkToolButton" id="button8">
 		  <property name="visible">True</property>
 		  <property name="tooltip" translatable="yes">Expand the whole tree in the right frame</property>
 		  <property name="label" translatable="yes">Expand</property>
 		  <property name="use_underline">True</property>
-		  <signal name="pressed" handler="on_expand_pressed"/>
+		  <property name="stock_id">gtk-add</property>
+		  <property name="visible_horizontal">True</property>
+		  <property name="visible_vertical">True</property>
+		  <property name="is_important">False</property>
+		  <signal name="clicked" handler="on_expand_clicked"/>
 		</widget>
+		<packing>
+		  <property name="expand">False</property>
+		  <property name="homogeneous">True</property>
+		</packing>
 	      </child>
 	    </widget>
 	  </child>
@@ -505,6 +608,8 @@
 		      <property name="visible">True</property>
 		      <property name="can_focus">True</property>
 		      <property name="editable">False</property>
+		      <property name="overwrite">False</property>
+		      <property name="accepts_tab">True</property>
 		      <property name="justification">GTK_JUSTIFY_LEFT</property>
 		      <property name="wrap_mode">GTK_WRAP_WORD</property>
 		      <property name="cursor_visible">True</property>
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index fea2628..a6516a6 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -49,9 +49,6 @@
 		goto error;
 	type[31] = '\0';
 
-	if (!type[0])
-		goto error;
-
 	ret = -EPERM;
 	if (type[0] == '.')
 		goto error;
@@ -144,6 +141,10 @@
 		goto error;
 	type[31] = '\0';
 
+	ret = -EPERM;
+	if (type[0] == '.')
+		goto error;
+
 	/* pull the description into kernel space */
 	ret = -EFAULT;
 	dlen = strnlen_user(_description, PAGE_SIZE - 1);
@@ -362,7 +363,7 @@
 
 	key_put(key);
  error:
-	return 0;
+	return ret;
 
 } /* end keyctl_revoke_key() */
 
@@ -685,6 +686,8 @@
 			goto can_read_key2;
 
 		ret = PTR_ERR(skey);
+		if (ret == -EAGAIN)
+			ret = -EACCES;
 		goto error2;
 	}
 
diff --git a/security/keys/keyring.c b/security/keys/keyring.c
index a1f6bac..9c208c7 100644
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -201,7 +201,11 @@
 
 	if (keyring->description) {
 		write_lock(&keyring_name_lock);
-		list_del(&keyring->type_data.link);
+
+		if (keyring->type_data.link.next != NULL &&
+		    !list_empty(&keyring->type_data.link))
+			list_del(&keyring->type_data.link);
+
 		write_unlock(&keyring_name_lock);
 	}
 
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 9b0369c..c089f78 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -678,7 +678,7 @@
 		keyring = keyring_alloc(name, tsk->uid, tsk->gid, 0, NULL);
 		if (IS_ERR(keyring)) {
 			ret = PTR_ERR(keyring);
-			goto error;
+			goto error2;
 		}
 	}
 	else if (IS_ERR(keyring)) {
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index dfcd983..90c1506 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -405,7 +405,7 @@
 		key_user_put(user);
 
 		/* link the new key into the appropriate keyring */
-		if (!PTR_ERR(key))
+		if (!IS_ERR(key))
 			request_key_link(key, dest_keyring);
 	}
 
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 6be2738..2253f38 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -826,7 +826,8 @@
 			sid = sbsec->def_sid;
 			rc = 0;
 		} else {
-			rc = security_context_to_sid(context, rc, &sid);
+			rc = security_context_to_sid_default(context, rc, &sid,
+			                                     sbsec->def_sid);
 			if (rc) {
 				printk(KERN_WARNING "%s:  context_to_sid(%s) "
 				       "returned %d for dev=%s ino=%ld\n",
@@ -3125,12 +3126,12 @@
 
 		if (sk->sk_family == PF_INET) {
 			addr4 = (struct sockaddr_in *)address;
-			if (addrlen != sizeof(struct sockaddr_in))
+			if (addrlen < sizeof(struct sockaddr_in))
 				return -EINVAL;
 			snum = ntohs(addr4->sin_port);
 		} else {
 			addr6 = (struct sockaddr_in6 *)address;
-			if (addrlen != sizeof(struct sockaddr_in6))
+			if (addrlen < SIN6_LEN_RFC2133)
 				return -EINVAL;
 			snum = ntohs(addr6->sin6_port);
 		}
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index fa187c9..71c0a19 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -65,6 +65,8 @@
 int security_context_to_sid(char *scontext, u32 scontext_len,
 	u32 *out_sid);
 
+int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *out_sid, u32 def_sid);
+
 int security_get_user_sids(u32 callsid, char *username,
 			   u32 **sids, u32 *nel);
 
diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c
index 756036b..d4c32c3 100644
--- a/security/selinux/ss/mls.c
+++ b/security/selinux/ss/mls.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/errno.h>
+#include "sidtab.h"
 #include "mls.h"
 #include "policydb.h"
 #include "services.h"
@@ -208,6 +209,26 @@
 }
 
 /*
+ * Copies the MLS range from `src' into `dst'.
+ */
+static inline int mls_copy_context(struct context *dst,
+				   struct context *src)
+{
+	int l, rc = 0;
+
+	/* Copy the MLS range from the source context */
+	for (l = 0; l < 2; l++) {
+		dst->range.level[l].sens = src->range.level[l].sens;
+		rc = ebitmap_cpy(&dst->range.level[l].cat,
+				 &src->range.level[l].cat);
+		if (rc)
+			break;
+	}
+
+	return rc;
+}
+
+/*
  * Set the MLS fields in the security context structure
  * `context' based on the string representation in
  * the string `*scontext'.  Update `*scontext' to
@@ -216,10 +237,20 @@
  *
  * This function modifies the string in place, inserting
  * NULL characters to terminate the MLS fields.
+ *
+ * If a def_sid is provided and no MLS field is present,
+ * copy the MLS field of the associated default context.
+ * Used for upgraded to MLS systems where objects may lack
+ * MLS fields.
+ *
+ * Policy read-lock must be held for sidtab lookup.
+ *
  */
 int mls_context_to_sid(char oldc,
 		       char **scontext,
-		       struct context *context)
+		       struct context *context,
+		       struct sidtab *s,
+		       u32 def_sid)
 {
 
 	char delim;
@@ -231,9 +262,23 @@
 	if (!selinux_mls_enabled)
 		return 0;
 
-	/* No MLS component to the security context. */
-	if (!oldc)
+	/*
+	 * No MLS component to the security context, try and map to
+	 * default if provided.
+	 */
+	if (!oldc) {
+		struct context *defcon;
+
+		if (def_sid == SECSID_NULL)
+			goto out;
+
+		defcon = sidtab_search(s, def_sid);
+		if (!defcon)
+			goto out;
+
+		rc = mls_copy_context(context, defcon);
 		goto out;
+	}
 
 	/* Extract low sensitivity. */
 	scontextp = p = *scontext;
@@ -334,26 +379,6 @@
 }
 
 /*
- * Copies the MLS range from `src' into `dst'.
- */
-static inline int mls_copy_context(struct context *dst,
-				   struct context *src)
-{
-	int l, rc = 0;
-
-	/* Copy the MLS range from the source context */
-	for (l = 0; l < 2; l++) {
-		dst->range.level[l].sens = src->range.level[l].sens;
-		rc = ebitmap_cpy(&dst->range.level[l].cat,
-				 &src->range.level[l].cat);
-		if (rc)
-			break;
-	}
-
-	return rc;
-}
-
-/*
  * Copies the effective MLS range from `src' into `dst'.
  */
 static inline int mls_scopy_context(struct context *dst,
diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h
index 0d37bea..03de697 100644
--- a/security/selinux/ss/mls.h
+++ b/security/selinux/ss/mls.h
@@ -23,7 +23,9 @@
 
 int mls_context_to_sid(char oldc,
 	               char **scontext,
-		       struct context *context);
+		       struct context *context,
+		       struct sidtab *s,
+		       u32 def_sid);
 
 int mls_convert_context(struct policydb *oldp,
 			struct policydb *newp,
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 922bb45..0141204 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -601,18 +601,7 @@
 
 }
 
-/**
- * security_context_to_sid - Obtain a SID for a given security context.
- * @scontext: security context
- * @scontext_len: length in bytes
- * @sid: security identifier, SID
- *
- * Obtains a SID associated with the security context that
- * has the string representation specified by @scontext.
- * Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient
- * memory is available, or 0 on success.
- */
-int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid)
+static int security_context_to_sid_core(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
 {
 	char *scontext2;
 	struct context context;
@@ -703,7 +692,7 @@
 
 	context.type = typdatum->value;
 
-	rc = mls_context_to_sid(oldc, &p, &context);
+	rc = mls_context_to_sid(oldc, &p, &context, &sidtab, def_sid);
 	if (rc)
 		goto out_unlock;
 
@@ -727,6 +716,46 @@
 	return rc;
 }
 
+/**
+ * security_context_to_sid - Obtain a SID for a given security context.
+ * @scontext: security context
+ * @scontext_len: length in bytes
+ * @sid: security identifier, SID
+ *
+ * Obtains a SID associated with the security context that
+ * has the string representation specified by @scontext.
+ * Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient
+ * memory is available, or 0 on success.
+ */
+int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid)
+{
+	return security_context_to_sid_core(scontext, scontext_len,
+	                                    sid, SECSID_NULL);
+}
+
+/**
+ * security_context_to_sid_default - Obtain a SID for a given security context,
+ * falling back to specified default if needed.
+ *
+ * @scontext: security context
+ * @scontext_len: length in bytes
+ * @sid: security identifier, SID
+ * @def_sid: default SID to assign on errror
+ *
+ * Obtains a SID associated with the security context that
+ * has the string representation specified by @scontext.
+ * The default SID is passed to the MLS layer to be used to allow
+ * kernel labeling of the MLS field if the MLS field is not present
+ * (for upgrading to MLS without full relabel).
+ * Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient
+ * memory is available, or 0 on success.
+ */
+int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+{
+	return security_context_to_sid_core(scontext, scontext_len,
+	                                    sid, def_sid);
+}
+
 static int compute_sid_handle_invalid_context(
 	struct context *scontext,
 	struct context *tcontext,
diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig
index 34c1740..2e4a5e0 100644
--- a/sound/arm/Kconfig
+++ b/sound/arm/Kconfig
@@ -20,5 +20,17 @@
 	select SND_PCM
 	select SND_AC97_CODEC
 
-endmenu
+config SND_PXA2XX_PCM
+	tristate
+	select SND_PCM
 
+config SND_PXA2XX_AC97
+	tristate "AC97 driver for the Intel PXA2xx chip"
+	depends on ARCH_PXA && SND
+	select SND_PXA2XX_PCM
+	select SND_AC97_CODEC
+	help
+	  Say Y or M if you want to support any AC97 codec attached to
+	  the PXA2xx AC97 interface.
+
+endmenu
diff --git a/sound/arm/Makefile b/sound/arm/Makefile
index f74ec28..103f136 100644
--- a/sound/arm/Makefile
+++ b/sound/arm/Makefile
@@ -3,9 +3,11 @@
 #
 
 snd-sa11xx-uda1341-objs := sa11xx-uda1341.o
-
-# Toplevel Module Dependency
-obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o 
-
-obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
 snd-aaci-objs			:= aaci.o devdma.o
+snd-pxa2xx-pcm-objs := pxa2xx-pcm.o
+snd-pxa2xx-ac97-objs := pxa2xx-ac97.o
+
+obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o 
+obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
+obj-$(CONFIG_SND_PXA2XX_PCM) += snd-pxa2xx-pcm.o
+obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
new file mode 100644
index 0000000..4605230
--- /dev/null
+++ b/sound/arm/pxa2xx-ac97.c
@@ -0,0 +1,410 @@
+/*
+ * linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Dec 02, 2004
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+
+#include <asm/irq.h>
+#include <asm/semaphore.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/audio.h>
+
+#include "pxa2xx-pcm.h"
+
+
+static DECLARE_MUTEX(car_mutex);
+static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
+static volatile long gsr_bits;
+
+static unsigned short pxa2xx_ac97_read(ac97_t *ac97, unsigned short reg)
+{
+	unsigned short val = -1;
+	volatile u32 *reg_addr;
+
+	down(&car_mutex);
+	if (CAR & CAR_CAIP) {
+		printk(KERN_CRIT"%s: CAR_CAIP already set\n", __FUNCTION__);
+		goto out;
+	}
+
+	/* set up primary or secondary codec space */
+	reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE;
+	reg_addr += (reg >> 1);
+
+	/* start read access across the ac97 link */
+	gsr_bits = 0;
+	val = *reg_addr;
+	if (reg == AC97_GPIO_STATUS)
+		goto out;
+	wait_event_timeout(gsr_wq, gsr_bits & GSR_SDONE, 1);
+	if (!gsr_bits & GSR_SDONE) {
+		printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
+				__FUNCTION__, reg, gsr_bits);
+		val = -1;
+		goto out;
+	}
+
+	/* valid data now */
+	gsr_bits = 0;
+	val = *reg_addr;			
+	/* but we've just started another cycle... */
+	wait_event_timeout(gsr_wq, gsr_bits & GSR_SDONE, 1);
+
+out:	up(&car_mutex);
+	return val;
+}
+
+static void pxa2xx_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short val)
+{
+	volatile u32 *reg_addr;
+
+	down(&car_mutex);
+
+	if (CAR & CAR_CAIP) {
+		printk(KERN_CRIT "%s: CAR_CAIP already set\n", __FUNCTION__);
+		goto out;
+	}
+
+	/* set up primary or secondary codec space */
+	reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE;
+	reg_addr += (reg >> 1);
+	gsr_bits = 0;
+	*reg_addr = val;
+	wait_event_timeout(gsr_wq, gsr_bits & GSR_CDONE, 1);
+	if (!gsr_bits & GSR_SDONE)
+		printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
+				__FUNCTION__, reg, gsr_bits);
+
+out:	up(&car_mutex);
+}
+
+static void pxa2xx_ac97_reset(ac97_t *ac97)
+{
+	/* First, try cold reset */
+	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
+	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
+
+	gsr_bits = 0;
+#ifdef CONFIG_PXA27x
+	/* PXA27x Developers Manual section 13.5.2.2.1 */
+	pxa_set_cken(1 << 31, 1);
+	udelay(5);
+	pxa_set_cken(1 << 31, 0);
+	GCR = GCR_COLD_RST;
+	udelay(50);
+#else
+	GCR = GCR_COLD_RST;
+	GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
+	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+#endif
+
+	if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) {
+		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
+				 __FUNCTION__, gsr_bits);
+
+		/* let's try warm reset */
+		gsr_bits = 0;
+#ifdef CONFIG_PXA27x
+		/* warm reset broken on Bulverde,
+		   so manually keep AC97 reset high */
+		pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); 
+		udelay(10);
+		GCR |= GCR_WARM_RST;
+		pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+		udelay(50);
+#else
+		GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN;;
+		wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+#endif			
+
+		if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
+			printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
+					 __FUNCTION__, gsr_bits);
+	}
+
+	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
+	GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+}
+
+static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	long status;
+
+	status = GSR;
+	if (status) {
+		GSR = status;
+		gsr_bits |= status;
+		wake_up(&gsr_wq);
+
+#ifdef CONFIG_PXA27x
+		/* Although we don't use those we still need to clear them
+		   since they tend to spuriously trigger when MMC is used
+		   (hardware bug? go figure)... */
+		MISR = MISR_EOC;
+		PISR = PISR_EOC;
+		MCSR = MCSR_EOC;
+#endif
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static ac97_bus_ops_t pxa2xx_ac97_ops = {
+	.read	= pxa2xx_ac97_read,
+	.write	= pxa2xx_ac97_write,
+	.reset	= pxa2xx_ac97_reset,
+};
+
+static pxa2xx_pcm_dma_params_t pxa2xx_ac97_pcm_out = {
+	.name			= "AC97 PCM out",
+	.dev_addr		= __PREG(PCDR),
+	.drcmr			= &DRCMRTXPCDR,
+	.dcmd			= DCMD_INCSRCADDR | DCMD_FLOWTRG |
+				  DCMD_BURST32 | DCMD_WIDTH4,
+};
+
+static pxa2xx_pcm_dma_params_t pxa2xx_ac97_pcm_in = {
+	.name			= "AC97 PCM in",
+	.dev_addr		= __PREG(PCDR),
+	.drcmr			= &DRCMRRXPCDR,
+	.dcmd			= DCMD_INCTRGADDR | DCMD_FLOWSRC |
+				  DCMD_BURST32 | DCMD_WIDTH4,
+};
+
+static snd_pcm_t *pxa2xx_ac97_pcm;
+static ac97_t *pxa2xx_ac97_ac97;
+
+static int pxa2xx_ac97_pcm_startup(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	pxa2xx_audio_ops_t *platform_ops;
+	int r;
+
+	runtime->hw.channels_min = 2;
+	runtime->hw.channels_max = 2;
+
+	r = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+	    AC97_RATES_FRONT_DAC : AC97_RATES_ADC;
+	runtime->hw.rates = pxa2xx_ac97_ac97->rates[r];
+	snd_pcm_limit_hw_rates(runtime);
+
+       	platform_ops = substream->pcm->card->dev->platform_data;
+	if (platform_ops && platform_ops->startup)
+		return platform_ops->startup(substream, platform_ops->priv);
+	else
+		return 0;
+}
+
+static void pxa2xx_ac97_pcm_shutdown(snd_pcm_substream_t *substream)
+{
+	pxa2xx_audio_ops_t *platform_ops;
+
+       	platform_ops = substream->pcm->card->dev->platform_data;
+	if (platform_ops && platform_ops->shutdown)
+		platform_ops->shutdown(substream, platform_ops->priv);
+}
+
+static int pxa2xx_ac97_pcm_prepare(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	int reg = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		  AC97_PCM_FRONT_DAC_RATE : AC97_PCM_LR_ADC_RATE;
+	return snd_ac97_set_rate(pxa2xx_ac97_ac97, reg, runtime->rate);
+}
+
+static pxa2xx_pcm_client_t pxa2xx_ac97_pcm_client = {
+	.playback_params	= &pxa2xx_ac97_pcm_out,
+	.capture_params		= &pxa2xx_ac97_pcm_in,
+	.startup		= pxa2xx_ac97_pcm_startup,
+	.shutdown		= pxa2xx_ac97_pcm_shutdown,
+	.prepare		= pxa2xx_ac97_pcm_prepare,
+};
+
+#ifdef CONFIG_PM
+
+static int pxa2xx_ac97_do_suspend(snd_card_t *card, unsigned int state)
+{
+	if (card->power_state != SNDRV_CTL_POWER_D3cold) {
+		pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data;
+		snd_pcm_suspend_all(pxa2xx_ac97_pcm);
+		snd_ac97_suspend(pxa2xx_ac97_ac97);
+		snd_power_change_state(card, SNDRV_CTL_POWER_D3cold);
+		if (platform_ops && platform_ops->suspend)
+			platform_ops->suspend(platform_ops->priv);
+		GCR |= GCR_ACLINK_OFF;
+		pxa_set_cken(CKEN2_AC97, 0);
+	}
+
+	return 0;
+}
+
+static int pxa2xx_ac97_do_resume(snd_card_t *card, unsigned int state)
+{
+	if (card->power_state != SNDRV_CTL_POWER_D0) {
+		pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data;
+		pxa_set_cken(CKEN2_AC97, 1);
+		if (platform_ops && platform_ops->resume)
+			platform_ops->resume(platform_ops->priv);
+		snd_ac97_resume(pxa2xx_ac97_ac97);
+		snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+	}
+
+	return 0;
+}
+
+static int pxa2xx_ac97_suspend(struct device *_dev, u32 state, u32 level)
+{
+	snd_card_t *card = dev_get_drvdata(_dev);
+	int ret = 0;
+
+	if (card && level == SUSPEND_DISABLE)
+		ret = pxa2xx_ac97_do_suspend(card, SNDRV_CTL_POWER_D3cold);
+
+	return ret;
+}
+
+static int pxa2xx_ac97_resume(struct device *_dev, u32 level)
+{
+	snd_card_t *card = dev_get_drvdata(_dev);
+	int ret = 0;
+
+	if (card && level == RESUME_ENABLE)
+		ret = pxa2xx_ac97_do_resume(card, SNDRV_CTL_POWER_D0);
+
+	return ret;
+}
+
+#else
+#define pxa2xx_ac97_suspend	NULL
+#define pxa2xx_ac97_resume	NULL
+#endif
+
+static int pxa2xx_ac97_probe(struct device *dev)
+{
+	snd_card_t *card;
+	ac97_bus_t *ac97_bus;
+	ac97_template_t ac97_template;
+	int ret;
+
+	ret = -ENOMEM;
+	card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			    THIS_MODULE, 0);
+	if (!card)
+		goto err;
+
+	card->dev = dev;
+	strncpy(card->driver, dev->driver->name, sizeof(card->driver));
+
+	ret = pxa2xx_pcm_new(card, &pxa2xx_ac97_pcm_client, &pxa2xx_ac97_pcm);
+	if (ret)
+		goto err;
+
+	ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL);
+	if (ret < 0)
+		goto err;
+
+	pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+	pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
+	pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
+	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+#ifdef CONFIG_PXA27x
+	/* Use GPIO 113 as AC97 Reset on Bulverde */
+	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
+#endif
+	pxa_set_cken(CKEN2_AC97, 1);
+
+	ret = snd_ac97_bus(card, 0, &pxa2xx_ac97_ops, NULL, &ac97_bus);
+	if (ret)
+		goto err;
+	memset(&ac97_template, 0, sizeof(ac97_template));
+	ret = snd_ac97_mixer(ac97_bus, &ac97_template, &pxa2xx_ac97_ac97);
+	if (ret)
+		goto err;
+
+	snprintf(card->shortname, sizeof(card->shortname),
+		 "%s", snd_ac97_get_short_name(pxa2xx_ac97_ac97));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s (%s)", dev->driver->name, card->mixername);
+
+	snd_card_set_pm_callback(card, pxa2xx_ac97_do_suspend,
+				 pxa2xx_ac97_do_resume, NULL);
+	ret = snd_card_register(card);
+	if (ret == 0) {
+		dev_set_drvdata(dev, card);
+		return 0;
+	}
+
+ err:
+	if (card)
+		snd_card_free(card);
+	if (CKEN & CKEN2_AC97) {
+		GCR |= GCR_ACLINK_OFF;
+		free_irq(IRQ_AC97, NULL);
+		pxa_set_cken(CKEN2_AC97, 0);
+	}
+	return ret;
+}
+
+static int pxa2xx_ac97_remove(struct device *dev)
+{
+	snd_card_t *card = dev_get_drvdata(dev);
+
+	if (card) {
+		snd_card_free(card);
+		dev_set_drvdata(dev, NULL);
+		GCR |= GCR_ACLINK_OFF;
+		free_irq(IRQ_AC97, NULL);
+		pxa_set_cken(CKEN2_AC97, 0);
+	}
+
+	return 0;
+}
+
+static struct device_driver pxa2xx_ac97_driver = {
+	.name		= "pxa2xx-ac97",
+	.bus		= &platform_bus_type,
+	.probe		= pxa2xx_ac97_probe,
+	.remove		= pxa2xx_ac97_remove,
+	.suspend	= pxa2xx_ac97_suspend,
+	.resume		= pxa2xx_ac97_resume,
+};
+
+static int __init pxa2xx_ac97_init(void)
+{
+	return driver_register(&pxa2xx_ac97_driver);
+}
+
+static void __exit pxa2xx_ac97_exit(void)
+{
+	driver_unregister(&pxa2xx_ac97_driver);
+}
+
+module_init(pxa2xx_ac97_init);
+module_exit(pxa2xx_ac97_exit);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
+MODULE_LICENSE("GPL");
diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c
new file mode 100644
index 0000000..b1eb53b
--- /dev/null
+++ b/sound/arm/pxa2xx-pcm.c
@@ -0,0 +1,367 @@
+/*
+ * linux/sound/arm/pxa2xx-pcm.c -- ALSA PCM interface for the Intel PXA2xx chip
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 30, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+
+#include "pxa2xx-pcm.h"
+
+
+static const snd_pcm_hardware_t pxa2xx_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED |
+				  SNDRV_PCM_INFO_PAUSE,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+	.period_bytes_min	= 32,
+	.period_bytes_max	= 8192 - 32,
+	.periods_min		= 1,
+	.periods_max		= PAGE_SIZE/sizeof(pxa_dma_desc),
+	.buffer_bytes_max	= 128 * 1024,
+	.fifo_size		= 32,
+};
+
+struct pxa2xx_runtime_data {
+	int dma_ch;
+	pxa2xx_pcm_dma_params_t *params;
+	pxa_dma_desc *dma_desc_array;
+	dma_addr_t dma_desc_array_phys;
+};
+
+static int pxa2xx_pcm_hw_params(snd_pcm_substream_t *substream,
+				snd_pcm_hw_params_t *params)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	struct pxa2xx_runtime_data *rtd = runtime->private_data;
+	size_t totsize = params_buffer_bytes(params);
+	size_t period = params_period_bytes(params);
+	pxa_dma_desc *dma_desc;
+	dma_addr_t dma_buff_phys, next_desc_phys;
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = totsize;
+
+	dma_desc = rtd->dma_desc_array;
+	next_desc_phys = rtd->dma_desc_array_phys;
+	dma_buff_phys = runtime->dma_addr;
+	do {
+		next_desc_phys += sizeof(pxa_dma_desc);
+		dma_desc->ddadr = next_desc_phys;
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			dma_desc->dsadr = dma_buff_phys;
+			dma_desc->dtadr = rtd->params->dev_addr;
+		} else {
+			dma_desc->dsadr = rtd->params->dev_addr;
+			dma_desc->dtadr = dma_buff_phys;
+		}
+		if (period > totsize)
+			period = totsize;
+		dma_desc->dcmd = rtd->params->dcmd | period | DCMD_ENDIRQEN;
+		dma_desc++;
+		dma_buff_phys += period;
+	} while (totsize -= period);
+	dma_desc[-1].ddadr = rtd->dma_desc_array_phys;
+
+	return 0;
+}
+
+static int pxa2xx_pcm_hw_free(snd_pcm_substream_t *substream)
+{
+	struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
+
+	*rtd->params->drcmr = 0;
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+static int pxa2xx_pcm_prepare(snd_pcm_substream_t *substream)
+{
+	pxa2xx_pcm_client_t *client = substream->private_data;
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	struct pxa2xx_runtime_data *rtd = runtime->private_data;
+
+	DCSR(rtd->dma_ch) &= ~DCSR_RUN;
+	DCSR(rtd->dma_ch) = 0;
+	DCMD(rtd->dma_ch) = 0;
+	*rtd->params->drcmr = rtd->dma_ch | DRCMR_MAPVLD;
+
+	return client->prepare(substream);
+}
+
+static int pxa2xx_pcm_trigger(snd_pcm_substream_t *substream, int cmd)
+{
+	struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		DDADR(rtd->dma_ch) = rtd->dma_desc_array_phys;
+		DCSR(rtd->dma_ch) = DCSR_RUN;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		DCSR(rtd->dma_ch) &= ~DCSR_RUN;
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		DCSR(rtd->dma_ch) |= DCSR_RUN;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void pxa2xx_pcm_dma_irq(int dma_ch, void *dev_id, struct pt_regs *regs)
+{
+	snd_pcm_substream_t *substream = dev_id;
+	struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
+	int dcsr;
+
+	dcsr = DCSR(dma_ch);
+	DCSR(dma_ch) = dcsr & ~DCSR_STOPIRQEN;
+
+	if (dcsr & DCSR_ENDINTR) {
+		snd_pcm_period_elapsed(substream);
+	} else {
+		printk( KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
+			rtd->params->name, dma_ch, dcsr );
+		snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+	}
+}
+
+static snd_pcm_uframes_t pxa2xx_pcm_pointer(snd_pcm_substream_t *substream)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	struct pxa2xx_runtime_data *rtd = runtime->private_data;
+	dma_addr_t ptr = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			 DSADR(rtd->dma_ch) : DTADR(rtd->dma_ch);
+	snd_pcm_uframes_t x = bytes_to_frames(runtime, ptr - runtime->dma_addr);
+	if (x == runtime->buffer_size)
+		x = 0;
+	return x;
+}
+
+static int
+pxa2xx_pcm_hw_rule_mult32(snd_pcm_hw_params_t *params, snd_pcm_hw_rule_t *rule)
+{
+	snd_interval_t *i = hw_param_interval(params, rule->var);
+	int changed = 0;
+
+	if (i->min & 31) {
+		i->min = (i->min & ~31) + 32;
+		i->openmin = 0;
+		changed = 1;
+	}
+
+	if (i->max & 31) {
+		i->max &= ~31;
+		i->openmax = 0;
+		changed = 1;
+	}
+
+	return changed;
+}
+
+static int pxa2xx_pcm_open(snd_pcm_substream_t *substream)
+{
+	pxa2xx_pcm_client_t *client = substream->private_data;
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	struct pxa2xx_runtime_data *rtd;
+	int ret;
+
+	runtime->hw = pxa2xx_pcm_hardware;
+
+	/*
+	 * For mysterious reasons (and despite what the manual says)
+	 * playback samples are lost if the DMA count is not a multiple
+	 * of the DMA burst size.  Let's add a rule to enforce that.
+	 */
+	ret = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+				  pxa2xx_pcm_hw_rule_mult32, NULL,
+				  SNDRV_PCM_HW_PARAM_PERIOD_BYTES, -1);
+	if (ret)
+		goto out;
+	ret = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+				  pxa2xx_pcm_hw_rule_mult32, NULL,
+				  SNDRV_PCM_HW_PARAM_BUFFER_BYTES, -1);
+	if (ret)
+		goto out;
+
+	ret = -ENOMEM;
+	rtd = kmalloc(sizeof(*rtd), GFP_KERNEL);
+	if (!rtd)
+		goto out;
+	rtd->dma_desc_array =
+		dma_alloc_writecombine(substream->pcm->card->dev, PAGE_SIZE,
+				       &rtd->dma_desc_array_phys, GFP_KERNEL);
+	if (!rtd->dma_desc_array)
+		goto err1;
+
+	rtd->params = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		      client->playback_params : client->capture_params;
+	ret = pxa_request_dma(rtd->params->name, DMA_PRIO_LOW,
+			      pxa2xx_pcm_dma_irq, substream);
+	if (ret < 0)
+		goto err2;
+	rtd->dma_ch = ret;
+
+	runtime->private_data = rtd;
+	ret = client->startup(substream);
+	if (!ret)
+		goto out;
+
+	pxa_free_dma(rtd->dma_ch);
+ err2:
+	dma_free_writecombine(substream->pcm->card->dev, PAGE_SIZE,
+			      rtd->dma_desc_array, rtd->dma_desc_array_phys);
+ err1:
+	kfree(rtd);
+ out:
+	return ret;
+}
+
+static int pxa2xx_pcm_close(snd_pcm_substream_t *substream)
+{
+	pxa2xx_pcm_client_t *client = substream->private_data;
+	struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
+
+	pxa_free_dma(rtd->dma_ch);
+	client->shutdown(substream);
+	dma_free_writecombine(substream->pcm->card->dev, PAGE_SIZE,
+			      rtd->dma_desc_array, rtd->dma_desc_array_phys);
+	kfree(rtd);
+	return 0;
+}
+
+static int
+pxa2xx_pcm_mmap(snd_pcm_substream_t *substream, struct vm_area_struct *vma)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+				     runtime->dma_area,
+				     runtime->dma_addr,
+				     runtime->dma_bytes);
+}
+
+static snd_pcm_ops_t pxa2xx_pcm_ops = {
+	.open		= pxa2xx_pcm_open,
+	.close		= pxa2xx_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= pxa2xx_pcm_hw_params,
+	.hw_free	= pxa2xx_pcm_hw_free,
+	.prepare	= pxa2xx_pcm_prepare,
+	.trigger	= pxa2xx_pcm_trigger,
+	.pointer	= pxa2xx_pcm_pointer,
+	.mmap		= pxa2xx_pcm_mmap,
+};
+
+static int pxa2xx_pcm_preallocate_dma_buffer(snd_pcm_t *pcm, int stream)
+{
+	snd_pcm_substream_t *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = pxa2xx_pcm_hardware.buffer_bytes_max;
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	return 0;
+}
+
+static void pxa2xx_pcm_free_dma_buffers(snd_pcm_t *pcm)
+{
+	snd_pcm_substream_t *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+		dma_free_writecombine(pcm->card->dev, buf->bytes,
+				      buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 pxa2xx_pcm_dmamask = 0xffffffff;
+
+int pxa2xx_pcm_new(snd_card_t *card, pxa2xx_pcm_client_t *client, snd_pcm_t **rpcm)
+{
+	snd_pcm_t *pcm;
+	int play = client->playback_params ? 1 : 0;
+	int capt = client->capture_params ? 1 : 0;
+	int ret;
+
+	ret = snd_pcm_new(card, "PXA2xx-PCM", 0, play, capt, &pcm);
+	if (ret)
+		goto out;
+
+	pcm->private_data = client;
+	pcm->private_free = pxa2xx_pcm_free_dma_buffers;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &pxa2xx_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (play) {
+		int stream = SNDRV_PCM_STREAM_PLAYBACK;
+		snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops);
+		ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream);
+		if (ret)
+			goto out;
+	}
+	if (capt) {
+		int stream = SNDRV_PCM_STREAM_CAPTURE;
+		snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops);
+		ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream);
+		if (ret)
+			goto out;
+	}
+
+	if (rpcm)
+		*rpcm = pcm;
+	ret = 0;
+
+ out:
+	return ret;
+}
+
+EXPORT_SYMBOL(pxa2xx_pcm_new);
+
+MODULE_AUTHOR("Nicolas Pitre");
+MODULE_DESCRIPTION("Intel PXA2xx PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/arm/pxa2xx-pcm.h b/sound/arm/pxa2xx-pcm.h
new file mode 100644
index 0000000..4351759
--- /dev/null
+++ b/sound/arm/pxa2xx-pcm.h
@@ -0,0 +1,29 @@
+/*
+ * linux/sound/arm/pxa2xx-pcm.h -- ALSA PCM interface for the Intel PXA2xx chip
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 30, 2004
+ * Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+typedef struct {
+	char *name;			/* stream identifier */
+	u32 dcmd;			/* DMA descriptor dcmd field */
+	volatile u32 *drcmr;		/* the DMA request channel to use */
+	u32 dev_addr;			/* device physical address for DMA */
+} pxa2xx_pcm_dma_params_t;
+	
+typedef struct {
+	pxa2xx_pcm_dma_params_t *playback_params;
+	pxa2xx_pcm_dma_params_t *capture_params;
+	int (*startup)(snd_pcm_substream_t *);
+	void (*shutdown)(snd_pcm_substream_t *);
+	int (*prepare)(snd_pcm_substream_t *);
+} pxa2xx_pcm_client_t;
+
+extern int pxa2xx_pcm_new(snd_card_t *, pxa2xx_pcm_client_t *, snd_pcm_t **);
+
diff --git a/sound/core/device.c b/sound/core/device.c
index 18c71f9..ca00ad7 100644
--- a/sound/core/device.c
+++ b/sound/core/device.c
@@ -28,7 +28,7 @@
 /**
  * snd_device_new - create an ALSA device component
  * @card: the card instance
- * @type: the device type, SNDRV_DEV_TYPE_XXX
+ * @type: the device type, SNDRV_DEV_XXX
  * @device_data: the data pointer of this device
  * @ops: the operator table
  *
@@ -46,7 +46,9 @@
 {
 	snd_device_t *dev;
 
-	snd_assert(card != NULL && device_data != NULL && ops != NULL, return -ENXIO);
+	snd_assert(card != NULL, return -ENXIO);
+	snd_assert(device_data != NULL, return -ENXIO);
+	snd_assert(ops != NULL, return -ENXIO);
 	dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL)
 		return -ENOMEM;
@@ -102,7 +104,7 @@
 }
 
 /**
- * snd_device_free - disconnect the device
+ * snd_device_disconnect - disconnect the device
  * @card: the card instance
  * @device_data: the data pointer to disconnect
  *
@@ -118,7 +120,7 @@
 {
 	struct list_head *list;
 	snd_device_t *dev;
-	
+
 	snd_assert(card != NULL, return -ENXIO);
 	snd_assert(device_data != NULL, return -ENXIO);
 	list_for_each(list, &card->devices) {
@@ -154,8 +156,9 @@
 	struct list_head *list;
 	snd_device_t *dev;
 	int err;
-	
-	snd_assert(card != NULL && device_data != NULL, return -ENXIO);
+
+	snd_assert(card != NULL, return -ENXIO);
+	snd_assert(device_data != NULL, return -ENXIO);
 	list_for_each(list, &card->devices) {
 		dev = snd_device(list);
 		if (dev->device_data != device_data)
diff --git a/sound/core/info.c b/sound/core/info.c
index 5e122bb..7f8bdf7 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -702,7 +702,7 @@
 }
 
 /**
- * snd_info_get_line - parse a string token
+ * snd_info_get_str - parse a string token
  * @dest: the buffer to store the string token
  * @src: the original string
  * @len: the max. length of token - 1
@@ -939,7 +939,8 @@
 {
 	struct proc_dir_entry *root;
 
-	snd_assert(entry != NULL && entry->p != NULL, return -ENXIO);
+	snd_assert(entry != NULL, return -ENXIO);
+	snd_assert(entry->p != NULL, return -ENXIO);
 	root = entry->parent == NULL ? snd_proc_root : entry->parent->p;
 	snd_assert(root, return -ENXIO);
 	down(&info_mutex);
diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c
index dbc23e3..0213256 100644
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -105,7 +105,8 @@
  */
 
 static void *snd_dma_hack_alloc_coherent(struct device *dev, size_t size,
-					 dma_addr_t *dma_handle, int flags)
+					 dma_addr_t *dma_handle,
+					 unsigned int __nocast flags)
 {
 	void *ret;
 	u64 dma_mask, coherent_dma_mask;
diff --git a/sound/core/memory.c b/sound/core/memory.c
index c1fb28e..f689557 100644
--- a/sound/core/memory.c
+++ b/sound/core/memory.c
@@ -89,7 +89,7 @@
 	}
 }
 
-static void *__snd_kmalloc(size_t size, int flags, void *caller)
+static void *__snd_kmalloc(size_t size, unsigned int __nocast flags, void *caller)
 {
 	unsigned long cpu_flags;
 	struct snd_alloc_track *t;
@@ -111,12 +111,12 @@
 }
 
 #define _snd_kmalloc(size, flags) __snd_kmalloc((size), (flags), __builtin_return_address(0));
-void *snd_hidden_kmalloc(size_t size, int flags)
+void *snd_hidden_kmalloc(size_t size, unsigned int __nocast flags)
 {
 	return _snd_kmalloc(size, flags);
 }
 
-void *snd_hidden_kcalloc(size_t n, size_t size, int flags)
+void *snd_hidden_kcalloc(size_t n, size_t size, unsigned int __nocast flags)
 {
 	void *ret = NULL;
 	if (n != 0 && size > INT_MAX / n)
@@ -184,7 +184,7 @@
 	snd_wrapper_vfree(obj);
 }
 
-char *snd_hidden_kstrdup(const char *s, int flags)
+char *snd_hidden_kstrdup(const char *s, unsigned int __nocast flags)
 {
 	int len;
 	char *buf;
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 64cb50d..402e2b4 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -38,7 +38,7 @@
 obj-$(call sequencer,$(CONFIG_SND_RAWMIDI)) += snd-seq-midi.o snd-seq-midi-event.o
 obj-$(call sequencer,$(CONFIG_SND_OPL3_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-instr.o
 obj-$(call sequencer,$(CONFIG_SND_OPL4_LIB)) += snd-seq-midi-event.o snd-seq-midi-emul.o snd-seq-instr.o
-obj-$(call sequencer,$(CONFIG_SND_GUS_SYNTH)) += snd-seq-instr.o
+obj-$(call sequencer,$(CONFIG_SND_GUS_SYNTH)) += snd-seq-midi-emul.o snd-seq-instr.o
 obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-seq-midi-emul.o snd-seq-virmidi.o
 obj-$(call sequencer,$(CONFIG_SND_EMU10K1)) += snd-seq-midi-emul.o snd-seq-virmidi.o
 obj-$(call sequencer,$(CONFIG_SND_TRIDENT)) += snd-seq-midi-emul.o snd-seq-instr.o
diff --git a/sound/core/seq/instr/ainstr_gf1.c b/sound/core/seq/instr/ainstr_gf1.c
index 0779c41..32e91c6 100644
--- a/sound/core/seq/instr/ainstr_gf1.c
+++ b/sound/core/seq/instr/ainstr_gf1.c
@@ -50,7 +50,8 @@
 {
 	gf1_wave_t *wp, *prev;
 	gf1_xwave_t xp;
-	int err, gfp_mask;
+	int err;
+	unsigned int gfp_mask;
 	unsigned int real_size;
 	
 	gfp_mask = atomic ? GFP_ATOMIC : GFP_KERNEL;
diff --git a/sound/core/seq/instr/ainstr_iw.c b/sound/core/seq/instr/ainstr_iw.c
index 39ff72b..2622b86 100644
--- a/sound/core/seq/instr/ainstr_iw.c
+++ b/sound/core/seq/instr/ainstr_iw.c
@@ -58,7 +58,7 @@
 					       iwffff_xenv_t *ex,
 					       char __user **data,
 					       long *len,
-					       int gfp_mask)
+					       unsigned int __nocast gfp_mask)
 {
 	__u32 stype;
 	iwffff_env_record_t *rp, *rp_last;
@@ -128,7 +128,8 @@
 {
 	iwffff_wave_t *wp, *prev;
 	iwffff_xwave_t xp;
-	int err, gfp_mask;
+	int err;
+	unsigned int gfp_mask;
 	unsigned int real_size;
 	
 	gfp_mask = atomic ? GFP_ATOMIC : GFP_KERNEL;
@@ -234,7 +235,8 @@
 	iwffff_xinstrument_t ix;
 	iwffff_layer_t *lp, *prev_lp;
 	iwffff_xlayer_t lx;
-	int err, gfp_mask;
+	int err;
+	unsigned int gfp_mask;
 
 	if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE)
 		return -EINVAL;
diff --git a/sound/core/seq/seq_midi.c b/sound/core/seq/seq_midi.c
index 57be915..4374829 100644
--- a/sound/core/seq/seq_midi.c
+++ b/sound/core/seq/seq_midi.c
@@ -134,7 +134,7 @@
 	seq_midisynth_t *msynth = (seq_midisynth_t *) private_data;
 	unsigned char msg[10];	/* buffer for constructing midi messages */
 	snd_rawmidi_substream_t *substream;
-	int res;
+	int len;
 
 	snd_assert(msynth != NULL, return -EINVAL);
 	substream = msynth->output_rfile.output;
@@ -146,20 +146,16 @@
 			snd_printd("seq_midi: invalid sysex event flags = 0x%x\n", ev->flags);
 			return 0;
 		}
-		res = snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
+		snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)dump_midi, substream);
 		snd_midi_event_reset_decode(msynth->parser);
-		if (res < 0)
-			return res;
 	} else {
 		if (msynth->parser == NULL)
 			return -EIO;
-		res = snd_midi_event_decode(msynth->parser, msg, sizeof(msg), ev);
-		if (res < 0)
-			return res;
-		if ((res = dump_midi(substream, msg, res)) < 0) {
+		len = snd_midi_event_decode(msynth->parser, msg, sizeof(msg), ev);
+		if (len < 0)
+			return 0;
+		if (dump_midi(substream, msg, len) < 0)
 			snd_midi_event_reset_decode(msynth->parser);
-			return res;
-		}
 	}
 	return 0;
 }
diff --git a/sound/core/wrappers.c b/sound/core/wrappers.c
index 9f39302..508e6d6 100644
--- a/sound/core/wrappers.c
+++ b/sound/core/wrappers.c
@@ -27,7 +27,7 @@
 #include <linux/fs.h>
 
 #ifdef CONFIG_SND_DEBUG_MEMORY
-void *snd_wrapper_kmalloc(size_t size, int flags)
+void *snd_wrapper_kmalloc(size_t size, unsigned int __nocast flags)
 {
 	return kmalloc(size, flags);
 }
diff --git a/sound/drivers/vx/vx_uer.c b/sound/drivers/vx/vx_uer.c
index 1811471..4fc38bd 100644
--- a/sound/drivers/vx/vx_uer.c
+++ b/sound/drivers/vx/vx_uer.c
@@ -162,34 +162,24 @@
 
 static int vx_calc_clock_from_freq(vx_core_t *chip, int freq)
 {
-#define XX_FECH48000                    0x0000004B
-#define XX_FECH32000                    0x00000171
-#define XX_FECH24000                    0x0000024B
-#define XX_FECH16000                    0x00000371
-#define XX_FECH12000                    0x0000044B
-#define XX_FECH8000                     0x00000571
-#define XX_FECH44100                    0x0000007F
-#define XX_FECH29400                    0x0000016F
-#define XX_FECH22050                    0x0000027F
-#define XX_FECH14000                    0x000003EF
-#define XX_FECH11025                    0x0000047F
-#define XX_FECH7350                     0x000005BF
+	int hexfreq;
 
-	switch (freq) {
-	case 48000:     return XX_FECH48000;
-	case 44100:     return XX_FECH44100;
-	case 32000:     return XX_FECH32000;
-	case 29400:     return XX_FECH29400;
-	case 24000:     return XX_FECH24000;
-	case 22050:     return XX_FECH22050;
-	case 16000:     return XX_FECH16000;
-	case 14000:     return XX_FECH14000;
-	case 12000:     return XX_FECH12000;
-	case 11025:     return XX_FECH11025;
-	case 8000:      return XX_FECH8000;
-	case 7350:      return XX_FECH7350;
-	default:        return freq;   /* The value is already correct */
-	}
+	snd_assert(freq > 0, return 0);
+
+	hexfreq = (28224000 * 10) / freq;
+	hexfreq = (hexfreq + 5) / 10;
+
+	/* max freq = 55125 Hz */
+	snd_assert(hexfreq > 0x00000200, return 0);
+
+	if (hexfreq <= 0x03ff)
+		return hexfreq - 0x00000201;
+	if (hexfreq <= 0x07ff) 
+		return (hexfreq / 2) - 1;
+	if (hexfreq <= 0x0fff)
+		return (hexfreq / 4) + 0x000001ff;
+
+	return 0x5fe; 	/* min freq = 6893 Hz */
 }
 
 
diff --git a/sound/i2c/other/ak4114.c b/sound/i2c/other/ak4114.c
index f5e6018..5adde30 100644
--- a/sound/i2c/other/ak4114.c
+++ b/sound/i2c/other/ak4114.c
@@ -554,7 +554,6 @@
 		if (snd_pcm_running(ak4114->capture_substream)) {
 			// printk("rate changed (%i <- %i)\n", runtime->rate, res);
 			snd_pcm_stop(ak4114->capture_substream, SNDRV_PCM_STATE_DRAINING);
-			wake_up(&runtime->sleep);
 			res = 1;
 		}
 		snd_pcm_stream_unlock_irqrestore(ak4114->capture_substream, _flags);
diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c
index 94bbd34..a636d9c 100644
--- a/sound/isa/gus/gus_main.c
+++ b/sound/isa/gus/gus_main.c
@@ -417,11 +417,13 @@
 	return 0;
 }
 
+#if defined(CONFIG_SND_SEQUENCER) || (defined(MODULE) && defined(CONFIG_SND_SEQUENCER_MODULE))
 static void snd_gus_seq_dev_free(snd_seq_device_t *seq_dev)
 {
 	snd_gus_card_t *gus = seq_dev->private_data;
 	gus->seq_dev = NULL;
 }
+#endif
 
 int snd_gus_initialize(snd_gus_card_t *gus)
 {
diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index 0e13623..3237968 100644
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -34,7 +34,7 @@
 
 /* weird stuff, derived from port I/O tracing with dosemu */
 
-unsigned char page_zero[] __initdata = {
+static unsigned char page_zero[] __initdata = {
 0x01, 0x7c, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf5, 0x00,
 0x11, 0x00, 0x20, 0x00, 0x32, 0x00, 0x40, 0x00, 0x13, 0x00, 0x00,
 0x00, 0x14, 0x02, 0x76, 0x00, 0x60, 0x00, 0x80, 0x02, 0x00, 0x00,
@@ -61,7 +61,7 @@
 0x1d, 0x02, 0xdf
 };
 
-unsigned char page_one[] __initdata = {
+static unsigned char page_one[] __initdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x19, 0x00,
 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xd8, 0x00, 0x00,
 0x02, 0x20, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x01,
@@ -88,7 +88,7 @@
 0x60, 0x00, 0x1b
 };
 
-unsigned char page_two[] __initdata = {
+static unsigned char page_two[] __initdata = {
 0xc4, 0x00, 0x44, 0x07, 0x44, 0x00, 0x40, 0x25, 0x01, 0x06, 0xc4,
 0x07, 0x40, 0x25, 0x01, 0x00, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -103,7 +103,7 @@
 0x46, 0x05, 0x46, 0x07, 0x46, 0x07, 0x44
 };
 
-unsigned char page_three[] __initdata = {
+static unsigned char page_three[] __initdata = {
 0x07, 0x40, 0x00, 0x00, 0x00, 0x47, 0x00, 0x40, 0x00, 0x40, 0x06,
 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -118,7 +118,7 @@
 0x02, 0x00, 0x42, 0x00, 0xc0, 0x00, 0x40
 };
 
-unsigned char page_four[] __initdata = {
+static unsigned char page_four[] __initdata = {
 0x63, 0x03, 0x26, 0x02, 0x2c, 0x00, 0x24, 0x00, 0x2e, 0x02, 0x02,
 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -133,7 +133,7 @@
 0x02, 0x62, 0x02, 0x20, 0x01, 0x21, 0x01
 };
 
-unsigned char page_six[] __initdata = {
+static unsigned char page_six[] __initdata = {
 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x04, 0x00, 0x00, 0x06, 0x00,
 0x00, 0x08, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x0e,
 0x00, 0x00, 0x10, 0x00, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x00,
@@ -154,7 +154,7 @@
 0x80, 0x00, 0x7e, 0x80, 0x80
 };
 
-unsigned char page_seven[] __initdata = {
+static unsigned char page_seven[] __initdata = {
 0x0f, 0xff, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0x02, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00,
 0x08, 0x00, 0x00, 0x00, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x0f,
@@ -181,7 +181,7 @@
 0x00, 0x02, 0x00
 };
 
-unsigned char page_zero_v2[] __initdata = {
+static unsigned char page_zero_v2[] __initdata = {
 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -193,7 +193,7 @@
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-unsigned char page_one_v2[] __initdata = {
+static unsigned char page_one_v2[] __initdata = {
 0x01, 0xc0, 0x01, 0xfa, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -205,21 +205,21 @@
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-unsigned char page_two_v2[] __initdata = {
+static unsigned char page_two_v2[] __initdata = {
 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00
 };
-unsigned char page_three_v2[] __initdata = {
+static unsigned char page_three_v2[] __initdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00
 };
-unsigned char page_four_v2[] __initdata = {
+static unsigned char page_four_v2[] __initdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -227,7 +227,7 @@
 0x00, 0x00, 0x00, 0x00
 };
 
-unsigned char page_seven_v2[] __initdata = {
+static unsigned char page_seven_v2[] __initdata = {
 0x0f, 0xff, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -239,7 +239,7 @@
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-unsigned char mod_v2[] __initdata = {
+static unsigned char mod_v2[] __initdata = {
 0x01, 0x00, 0x02, 0x00, 0x01, 0x01, 0x02, 0x00, 0x01, 0x02, 0x02,
 0x00, 0x01, 0x03, 0x02, 0x00, 0x01, 0x04, 0x02, 0x00, 0x01, 0x05,
 0x02, 0x00, 0x01, 0x06, 0x02, 0x00, 0x01, 0x07, 0x02, 0x00, 0xb0,
@@ -269,7 +269,7 @@
 0x02, 0x01, 0x01, 0x04, 0x02, 0x01, 0x01, 0x05, 0x02, 0x01, 0x01,
 0x06, 0x02, 0x01, 0x01, 0x07, 0x02, 0x01
 };
-unsigned char coefficients[] __initdata = {
+static unsigned char coefficients[] __initdata = {
 0x07, 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x00, 0x4b, 0x03,
 0x11, 0x00, 0x4d, 0x01, 0x32, 0x07, 0x46, 0x00, 0x00, 0x07, 0x49,
 0x00, 0x00, 0x07, 0x40, 0x00, 0x00, 0x07, 0x41, 0x00, 0x00, 0x01,
@@ -305,14 +305,14 @@
 0x06, 0x6c, 0x4c, 0x6c, 0x06, 0x50, 0x52, 0xe2, 0x06, 0x42, 0x02,
 0xba
 };
-unsigned char coefficients2[] __initdata = {
+static unsigned char coefficients2[] __initdata = {
 0x07, 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x07, 0x45, 0x0f,
 0xff, 0x07, 0x48, 0x0f, 0xff, 0x07, 0x7b, 0x04, 0xcc, 0x07, 0x7d,
 0x04, 0xcc, 0x07, 0x7c, 0x00, 0x00, 0x07, 0x7e, 0x00, 0x00, 0x07,
 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x07, 0x47, 0x00, 0x00,
 0x07, 0x4a, 0x00, 0x00, 0x07, 0x4c, 0x00, 0x00, 0x07, 0x4e, 0x00, 0x00
 };
-unsigned char coefficients3[] __initdata = {
+static unsigned char coefficients3[] __initdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, 0x51, 0x00,
 0x51, 0x00, 0x7a, 0x00, 0x7a, 0x00, 0xa3, 0x00, 0xa3, 0x00, 0xcc,
 0x00, 0xcc, 0x00, 0xf5, 0x00, 0xf5, 0x01, 0x1e, 0x01, 0x1e, 0x01,
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index a4b72cd..6983eea 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -367,6 +367,7 @@
 		ac97->regs[reg] = value;
 		ac97->bus->ops->write(ac97, reg, value);
 	}
+	set_bit(reg, ac97->reg_accessed);
 	up(&ac97->reg_mutex);
 	return change;
 }
@@ -410,6 +411,7 @@
 		ac97->regs[reg] = new;
 		ac97->bus->ops->write(ac97, reg, new);
 	}
+	set_bit(reg, ac97->reg_accessed);
 	return change;
 }
 
@@ -1076,6 +1078,11 @@
 	for (i = 0 ; i < ARRAY_SIZE(cbit); i++) {
 		unsigned short val;
 		snd_ac97_write(ac97, reg, 0x8080 | cbit[i] | (cbit[i] << 8));
+		/* Do the read twice due to buffers on some ac97 codecs.
+		 * e.g. The STAC9704 returns exactly what you wrote the the register
+		 * if you read it immediately. This causes the detect routine to fail.
+		 */
+		val = snd_ac97_read(ac97, reg);
 		val = snd_ac97_read(ac97, reg);
 		if (! *lo_max && (val & 0x7f) == cbit[i])
 			*lo_max = max[i];
@@ -2224,7 +2231,7 @@
  */
 void snd_ac97_resume(ac97_t *ac97)
 {
-	int i;
+	unsigned long end_time;
 
 	if (ac97->bus->ops->reset) {
 		ac97->bus->ops->reset(ac97);
@@ -2242,26 +2249,26 @@
 	snd_ac97_write(ac97, AC97_POWERDOWN, ac97->regs[AC97_POWERDOWN]);
 	if (ac97_is_audio(ac97)) {
 		ac97->bus->ops->write(ac97, AC97_MASTER, 0x8101);
-		for (i = HZ/10; i >= 0; i--) {
+		end_time = jiffies + msecs_to_jiffies(100);
+		do {
 			if (snd_ac97_read(ac97, AC97_MASTER) == 0x8101)
 				break;
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule_timeout(1);
-		}
+		} while (time_after_eq(end_time, jiffies));
 		/* FIXME: extra delay */
 		ac97->bus->ops->write(ac97, AC97_MASTER, 0x8000);
-		if (snd_ac97_read(ac97, AC97_MASTER) != 0x8000) {
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout(HZ/4);
-		}
+		if (snd_ac97_read(ac97, AC97_MASTER) != 0x8000)
+			msleep(250);
 	} else {
-		for (i = HZ/10; i >= 0; i--) {
+		end_time = jiffies + msecs_to_jiffies(100);
+		do {
 			unsigned short val = snd_ac97_read(ac97, AC97_EXTENDED_MID);
 			if (val != 0xffff && (val & 1) != 0)
 				break;
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule_timeout(1);
-		}
+		} while (time_after_eq(end_time, jiffies));
 	}
 __reset_ready:
 
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index a15eb85..66edc85 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1528,6 +1528,9 @@
 	},
 	AC97_SURROUND_JACK_MODE_CTL,
 	AC97_CHANNEL_MODE_CTL,
+
+	AC97_SINGLE("Headphone Jack Sense", AC97_AD_JACK_SPDIF, 10, 1, 0),
+	AC97_SINGLE("Line Jack Sense", AC97_AD_JACK_SPDIF, 12, 1, 0),
 };
 
 static int patch_ad1888_specific(ac97_t *ac97)
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index eb5c36d..f08ae71f 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -399,7 +399,7 @@
 	unsigned long end_time;
 	unsigned int res;
 	
-	end_time = jiffies + 10 * (HZ >> 2);
+	end_time = jiffies + 10 * msecs_to_jiffies(250);
 	do {
 		res = snd_ali_5451_peek(codec,port);
 		if (! (res & 0x8000))
@@ -422,7 +422,7 @@
 	dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER);
 	dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
 
-	end_time = jiffies + 10 * (HZ >> 2);
+	end_time = jiffies + 10 * msecs_to_jiffies(250);
 	do {
 		dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER);
 		if (dwChk2 != dwChk1)
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index a6b4b8d..8d20029 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -265,6 +265,7 @@
  */
 static struct pci_device_id snd_atiixp_ids[] = {
 	{ 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
+	{ 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
 	{ 0, }
 };
 
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 4725b4a..f5a4ac1 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -306,7 +306,7 @@
 #define CM_REG_FM_PCI		0x50
 
 /*
- * for CMI-8338 .. this is not valid for CMI-8738.
+ * access from SB-mixer port
  */
 #define CM_REG_EXTENT_IND	0xf0
 #define CM_VPHONE_MASK		0xe0	/* Phone volume control (0-3) << 5 */
@@ -315,6 +315,7 @@
 #define CM_VSPKM		0x08	/* Speaker mute control, default high */
 #define CM_RLOOPREN		0x04    /* Rec. R-channel enable */
 #define CM_RLOOPLEN		0x02	/* Rec. L-channel enable */
+#define CM_VADMIC3		0x01	/* Mic record boost */
 
 /*
  * CMI-8338 spec ver 0.5 (this is not valid for CMI-8738):
@@ -2135,8 +2136,12 @@
 	CMIPCI_MIXER_VOL_STEREO("Aux Playback Volume", CM_REG_AUX_VOL, 4, 0, 15),
 	CMIPCI_MIXER_SW_STEREO("Aux Playback Switch", CM_REG_MIXER2, CM_VAUXLM_SHIFT, CM_VAUXRM_SHIFT, 0),
 	CMIPCI_MIXER_SW_STEREO("Aux Capture Switch", CM_REG_MIXER2, CM_RAUXLEN_SHIFT, CM_RAUXREN_SHIFT, 0),
-	CMIPCI_MIXER_SW_MONO("Mic Boost", CM_REG_MIXER2, CM_MICGAINZ_SHIFT, 1),
+	CMIPCI_MIXER_SW_MONO("Mic Boost Playback Switch", CM_REG_MIXER2, CM_MICGAINZ_SHIFT, 1),
 	CMIPCI_MIXER_VOL_MONO("Mic Capture Volume", CM_REG_MIXER2, CM_VADMIC_SHIFT, 7),
+	CMIPCI_SB_VOL_MONO("Phone Playback Volume", CM_REG_EXTENT_IND, 5, 7),
+	CMIPCI_DOUBLE("Phone Playback Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 4, 4, 1, 0, 0),
+	CMIPCI_DOUBLE("PC Speaker Playnack Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 3, 3, 1, 0, 0),
+	CMIPCI_DOUBLE("Mic Boost Capture Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 0, 0, 1, 0, 0),
 };
 
 /*
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index fd4c50c..ff28af1 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -2400,8 +2400,7 @@
 		if ((err = snd_ac97_read(ac97, AC97_REC_GAIN)) == 0x8a05)
 			return;
 
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(HZ/100);
+		msleep(10);
 	} while (time_after_eq(end_time, jiffies));
 
 	snd_printk("CS46xx secondary codec dont respond!\n");  
@@ -2435,8 +2434,7 @@
 			err = snd_ac97_mixer(chip->ac97_bus, &ac97, &chip->ac97[codec]);
 			return err;
 		}
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ/100);
+		msleep(10);
 	}
 	snd_printdd("snd_cs46xx: codec %d detection timeout\n", codec);
 	return -ENXIO;
@@ -3018,8 +3016,7 @@
 	/*
          *  Wait until the PLL has stabilized.
 	 */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ/10); /* 100ms */
+	msleep(100);
 
 	/*
 	 *  Turn on clocking of the core so that we can setup the serial ports.
@@ -3072,8 +3069,7 @@
 		 */
 		if (snd_cs46xx_peekBA0(chip, BA0_ACSTS) & ACSTS_CRDY)
 			goto ok1;
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout((HZ+99)/100);
+		msleep(10);
 	}
 
 
@@ -3122,8 +3118,7 @@
 		 */
 		if ((snd_cs46xx_peekBA0(chip, BA0_ACISV) & (ACISV_ISV3 | ACISV_ISV4)) == (ACISV_ISV3 | ACISV_ISV4))
 			goto ok2;
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout((HZ+99)/100);
+		msleep(10);
 	}
 
 #ifndef CONFIG_SND_CS46XX_NEW_DSP
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index 2085a99..b17142c 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -52,6 +52,7 @@
 static int max_synth_voices[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 64};
 static int max_buffer_size[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 128};
 static int enable_ir[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 0};
+static uint subsystem[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 0}; /* Force card subsystem model */
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for the EMU10K1 soundcard.");
@@ -71,7 +72,8 @@
 MODULE_PARM_DESC(max_buffer_size, "Maximum sample buffer size in MB.");
 module_param_array(enable_ir, bool, NULL, 0444);
 MODULE_PARM_DESC(enable_ir, "Enable IR.");
-
+module_param_array(subsystem, uint, NULL, 0444);
+MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
 /*
  * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value  Model:SB0400
  */
@@ -122,7 +124,7 @@
 		max_buffer_size[dev] = 1024;
 	if ((err = snd_emu10k1_create(card, pci, extin[dev], extout[dev],
 				      (long)max_buffer_size[dev] * 1024 * 1024,
-				      enable_ir[dev],
+				      enable_ir[dev], subsystem[dev],
 				      &emu)) < 0) {
 		snd_card_free(card);
 		return err;
@@ -140,7 +142,7 @@
 		return err;
 	}
 	/* This stores the periods table. */
-	if (emu->audigy && emu->revision == 4) { /* P16V */	
+	if (emu->card_capabilities->ca0151_chip) { /* P16V */	
 		if(snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci), 1024, &emu->p16v_buffer) < 0) {
 			snd_p16v_free(emu);
 			return -ENOMEM;
@@ -161,7 +163,7 @@
 		snd_card_free(card);
 		return err;
 	}
-	if (emu->audigy && emu->revision == 4) { /* P16V */	
+	if (emu->card_capabilities->ca0151_chip) { /* P16V */	
 		if ((err = snd_p16v_pcm(emu, 4, NULL)) < 0) {
 			snd_card_free(card);
 			return err;
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index a341e75..746b51e 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -191,7 +191,7 @@
 		/* Set playback routing. */
 		snd_emu10k1_ptr20_write(emu, CAPTURE_P16V_SOURCE, 0, 0x78e4);
 	}
-	if (emu->audigy && (emu->serial == 0x10011102) ) { /* audigy2 Value */
+	if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
 		/* Hacks for Alice3 to work independent of haP16V driver */
 		u32 tmp;
 
@@ -253,6 +253,8 @@
 			     HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
 		else
 			outl(HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
+	/* FIXME: Remove all these emu->model and replace it with a card recognition parameter,
+	 * e.g. card_capabilities->joystick */
 	} else if (emu->model == 0x20 ||
 	    emu->model == 0xc400 ||
 	    (emu->model == 0x21 && emu->revision < 6))
@@ -299,12 +301,12 @@
 	if (emu->audigy) {
 		outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG);
  
-		if (emu->revision == 4) { /* audigy2 */
+		if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
 			/* Unmute Analog now.  Set GPO6 to 1 for Apollo.
 			 * This has to be done after init ALice3 I2SOut beyond 48KHz.
 			 * So, sequence is important. */
 			outl(inl(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG);
-		} else if (emu->serial == 0x10011102) { /* audigy2 value */
+		} else if (emu->card_capabilities->ca0108_chip) { /* audigy2 value */
 			/* Unmute Analog now. */
 			outl(inl(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG);
 		} else {
@@ -614,6 +616,7 @@
 
 static emu_chip_details_t emu_chip_details[] = {
 	/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
+	/* Tested by James@superbug.co.uk 3rd July 2005 */
 	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
 	 .driver = "Audigy2", .name = "Audigy 2 Value [SB0400]", 
 	 .id = "Audigy2",
@@ -627,6 +630,14 @@
 	 .emu10k2_chip = 1,
 	 .ca0108_chip = 1,
 	 .ac97_chip = 1} ,
+	/* Tested by James@superbug.co.uk 8th July 2005. No sound available yet. */
+	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
+	 .driver = "Audigy2", .name = "E-mu 1212m [4001]", 
+	 .id = "EMU1212m",
+	 .emu10k2_chip = 1,
+	 .ca0102_chip = 1,
+	 .ecard = 1} ,
+	/* Tested by James@superbug.co.uk 3rd July 2005 */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20071102,
 	 .driver = "Audigy2", .name = "Audigy 4 PRO [SB0380]", 
 	 .id = "Audigy2",
@@ -687,19 +698,19 @@
 	 .ca0151_chip = 1,
 	 .spdif_bug = 1,
 	 .ac97_chip = 1} ,
-	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10020052,
-	 .driver = "Audigy", .name = "Audigy 1 ES [SB0160]", 
-	 .id = "Audigy",
-	 .emu10k2_chip = 1,
-	 .ca0102_chip = 1,
-	 .spdif_bug = 1,
-	 .ac97_chip = 1} ,
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00531102,
 	 .driver = "Audigy", .name = "Audigy 1 [SB0090]", 
 	 .id = "Audigy",
 	 .emu10k2_chip = 1,
 	 .ca0102_chip = 1,
 	 .ac97_chip = 1} ,
+	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00521102,
+	 .driver = "Audigy", .name = "Audigy 1 ES [SB0160]", 
+	 .id = "Audigy",
+	 .emu10k2_chip = 1,
+	 .ca0102_chip = 1,
+	 .spdif_bug = 1,
+	 .ac97_chip = 1} ,
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00511102,
 	 .driver = "Audigy", .name = "Audigy 1 [SB0090]", 
 	 .id = "Audigy",
@@ -712,96 +723,8 @@
 	 .emu10k2_chip = 1,
 	 .ca0102_chip = 1,
 	 .ac97_chip = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102,
-	 .driver = "EMU10K1", .name = "E-mu APS [4001]", 
-	 .id = "APS",
-	 .emu10k1_chip = 1,
-	 .ecard = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
-	 .driver = "EMU10K1", .name = "SBLive! Player 5.1 [SB0060]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
-	 .driver = "EMU10K1", .name = "SB Live 5.1", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
-	 .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102,
-	 .driver = "EMU10K1", .name = "SBLive! [CT4620]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4670]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4780]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102,
-	 .driver = "EMU10K1", .name = "SB PCI512 [CT4790]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4830]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4831]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4870]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [CT4871]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [SB0060]", 
-	 .id = "Live",
-	 .emu10k1_chip = 1,
-	 .ac97_chip = 1,
-	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102,
-	 .driver = "EMU10K1", .name = "SBLive! Value [SB0101]", 
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806B1102,
+	 .driver = "EMU10K1", .name = "SBLive! [SB0105]", 
 	 .id = "Live",
 	 .emu10k1_chip = 1,
 	 .ac97_chip = 1,
@@ -812,8 +735,91 @@
 	 .emu10k1_chip = 1,
 	 .ac97_chip = 1,
 	 .sblive51 = 1} ,
-	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806B1102,
-	 .driver = "EMU10K1", .name = "SBLive! [SB0105]", 
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [SB0101]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
+	 .driver = "EMU10K1", .name = "SB Live 5.1", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
+	 .driver = "EMU10K1", .name = "SBLive! Player 5.1 [SB0060]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4850]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
+	 .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4871]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4831]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4870]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	/* Tested by James@superbug.co.uk 3rd July 2005 */
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4830]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102,
+	 .driver = "EMU10K1", .name = "SB PCI512 [CT4790]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4780]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102,
+	 .driver = "EMU10K1", .name = "E-mu APS [4001]", 
+	 .id = "APS",
+	 .emu10k1_chip = 1,
+	 .ecard = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102,
+	 .driver = "EMU10K1", .name = "SBLive! [CT4620]", 
+	 .id = "Live",
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1,
+	 .sblive51 = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4670]", 
 	 .id = "Live",
 	 .emu10k1_chip = 1,
 	 .ac97_chip = 1,
@@ -833,6 +839,7 @@
 		       unsigned short extout_mask,
 		       long max_cache_bytes,
 		       int enable_ir,
+		       uint subsystem,
 		       emu10k1_t ** remu)
 {
 	emu10k1_t *emu;
@@ -878,10 +885,16 @@
 
 	for (c = emu_chip_details; c->vendor; c++) {
 		if (c->vendor == pci->vendor && c->device == pci->device) {
-			if (c->subsystem && c->subsystem != emu->serial)
-				continue;
-			if (c->revision && c->revision != emu->revision)
-				continue;
+			if (subsystem) {
+				if (c->subsystem && (c->subsystem == subsystem) ) {
+					break;
+				} else continue;
+			} else {
+				if (c->subsystem && (c->subsystem != emu->serial) )
+					continue;
+				if (c->revision && c->revision != emu->revision)
+					continue;
+			}
 			break;
 		}
 	}
@@ -892,10 +905,14 @@
 		return -ENOENT;
 	}
 	emu->card_capabilities = c;
-	if (c->subsystem != 0)
+	if (c->subsystem && !subsystem)
 		snd_printdd("Sound card name=%s\n", c->name);
-	else
-		snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x\n", c->name, pci->vendor, pci->device, emu->serial);
+	else if (subsystem) 
+		snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x. Forced to subsytem=0x%x\n",
+		       	c->name, pci->vendor, pci->device, emu->serial, c->subsystem);
+	else 
+		snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x.\n",
+		      	c->name, pci->vendor, pci->device, emu->serial);
 	
 	if (!*card->id && c->id) {
 		int i, n = 0;
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index 98f9801..a169133 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -822,7 +822,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_analog_front =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD Analog Front Volume",
+        .name =         "HD Analog Front Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_analog_front,
         .put =          snd_p16v_volume_put_analog_front
@@ -831,7 +831,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_analog_center_lfe =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD Analog Center/LFE Volume",
+        .name =         "HD Analog Center/LFE Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_analog_center_lfe,
         .put =          snd_p16v_volume_put_analog_center_lfe
@@ -840,7 +840,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_analog_unknown =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD Analog Unknown Volume",
+        .name =         "HD Analog Unknown Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_analog_unknown,
         .put =          snd_p16v_volume_put_analog_unknown
@@ -849,7 +849,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_analog_rear =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD Analog Rear Volume",
+        .name =         "HD Analog Rear Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_analog_rear,
         .put =          snd_p16v_volume_put_analog_rear
@@ -858,7 +858,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_spdif_front =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD SPDIF Front Volume",
+        .name =         "HD SPDIF Front Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_spdif_front,
         .put =          snd_p16v_volume_put_spdif_front
@@ -867,7 +867,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_spdif_center_lfe =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD SPDIF Center/LFE Volume",
+        .name =         "HD SPDIF Center/LFE Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_spdif_center_lfe,
         .put =          snd_p16v_volume_put_spdif_center_lfe
@@ -876,7 +876,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_spdif_unknown =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD SPDIF Unknown Volume",
+        .name =         "HD SPDIF Unknown Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_spdif_unknown,
         .put =          snd_p16v_volume_put_spdif_unknown
@@ -885,7 +885,7 @@
 static snd_kcontrol_new_t snd_p16v_volume_control_spdif_rear =
 {
         .iface =        SNDRV_CTL_ELEM_IFACE_MIXER,
-        .name =         "HD SPDIF Rear Volume",
+        .name =         "HD SPDIF Rear Playback Volume",
         .info =         snd_p16v_volume_info,
         .get =          snd_p16v_volume_get_spdif_rear,
         .put =          snd_p16v_volume_put_spdif_rear
@@ -936,7 +936,7 @@
 static snd_kcontrol_new_t snd_p16v_capture_source __devinitdata =
 {
 	.iface =	SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name =		"HD Capture source",
+	.name =		"HD source Capture",
 	.info =		snd_p16v_capture_source_info,
 	.get =		snd_p16v_capture_source_get,
 	.put =		snd_p16v_capture_source_put
@@ -985,7 +985,7 @@
 static snd_kcontrol_new_t snd_p16v_capture_channel __devinitdata =
 {
 	.iface =	SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name =		"HD Capture channel",
+	.name =		"HD channel Capture",
 	.info =		snd_p16v_capture_channel_info,
 	.get =		snd_p16v_capture_channel_get,
 	.put =		snd_p16v_capture_channel_put
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 4e63498..78a81f3 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -685,6 +685,15 @@
 	return 0;
 }
 
+static void snd_es1371_codec_wait(ac97_t *ac97)
+{
+	msleep(750);
+	snd_es1371_codec_read(ac97, AC97_RESET);
+	snd_es1371_codec_read(ac97, AC97_VENDOR_ID1);
+	snd_es1371_codec_read(ac97, AC97_VENDOR_ID2);
+	msleep(50);
+}
+
 static void snd_es1371_adc_rate(ensoniq_t * ensoniq, unsigned int rate)
 {
 	unsigned int n, truncm, freq, result;
@@ -1585,6 +1594,7 @@
 	static ac97_bus_ops_t ops = {
 		.write = snd_es1371_codec_write,
 		.read = snd_es1371_codec_read,
+		.wait = snd_es1371_codec_wait,
 	};
 
 	if ((err = snd_ac97_bus(card, 0, &ops, NULL, &pbus)) < 0)
@@ -2008,21 +2018,11 @@
 		if (pci->vendor == es1371_ac97_reset_hack[idx].vid &&
 		    pci->device == es1371_ac97_reset_hack[idx].did &&
 		    ensoniq->rev == es1371_ac97_reset_hack[idx].rev) {
-		        unsigned long tmo;
-			signed long tmo2;
-
 			ensoniq->cssr |= ES_1371_ST_AC97_RST;
 			outl(ensoniq->cssr, ES_REG(ensoniq, STATUS));
 			/* need to delay around 20ms(bleech) to give
 			some CODECs enough time to wakeup */
-			tmo = jiffies + (HZ / 50) + 1;
-			while (1) {
-				tmo2 = tmo - jiffies;
-				if (tmo2 <= 0)
-					break;
-				set_current_state(TASK_UNINTERRUPTIBLE);
-				schedule_timeout(tmo2);
-			}
+			msleep(20);
 			break;
 		}
 	/* AC'97 warm reset to start the bitclk */
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 327a341..9d7a287 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -664,11 +664,6 @@
 	return result;
 }
 
-#define big_mdelay(msec) do {\
-	set_current_state(TASK_UNINTERRUPTIBLE);\
-	schedule_timeout(((msec) * HZ + 999) / 1000);\
-} while (0)
-	
 /* Wait for the codec bus to be free */
 static int snd_es1968_ac97_wait(es1968_t *chip)
 {
@@ -1809,8 +1804,7 @@
 	snd_es1968_trigger_apu(chip, apu, ESM_APU_16BITLINEAR);
 	do_gettimeofday(&start_time);
 	spin_unlock_irq(&chip->reg_lock);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ / 20); /* 50 msec */
+	msleep(50);
 	spin_lock_irq(&chip->reg_lock);
 	offset = __apu_get_register(chip, apu, 5);
 	do_gettimeofday(&stop_time);
@@ -2093,7 +2087,7 @@
 	outw(0x0000, ioaddr + 0x60);	/* write 0 to gpio 0 */
 	udelay(20);
 	outw(0x0001, ioaddr + 0x60);	/* write 1 to gpio 1 */
-	big_mdelay(20);
+	msleep(20);
 
 	outw(save_68 | 0x1, ioaddr + 0x68);	/* now restore .. */
 	outw((inw(ioaddr + 0x38) & 0xfffc) | 0x1, ioaddr + 0x38);
@@ -2109,7 +2103,7 @@
 	outw(0x0001, ioaddr + 0x60);	/* write 1 to gpio */
 	udelay(20);
 	outw(0x0009, ioaddr + 0x60);	/* write 9 to gpio */
-	big_mdelay(500);
+	msleep(500);
 	//outw(inw(ioaddr + 0x38) & 0xfffc, ioaddr + 0x38);
 	outw(inw(ioaddr + 0x3a) & 0xfffc, ioaddr + 0x3a);
 	outw(inw(ioaddr + 0x3c) & 0xfffc, ioaddr + 0x3c);
@@ -2135,7 +2129,7 @@
 
 		if (w > 10000) {
 			outb(inb(ioaddr + 0x37) | 0x08, ioaddr + 0x37);	/* do a software reset */
-			big_mdelay(500);	/* oh my.. */
+			msleep(500);	/* oh my.. */
 			outb(inb(ioaddr + 0x37) & ~0x08,
 				ioaddr + 0x37);
 			udelay(1);
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 5999156..dd0d99d 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -262,6 +262,9 @@
 #define AC_PINCTL_OUT_EN		(1<<6)
 #define AC_PINCTL_HP_EN			(1<<7)
 
+/* Unsolicited response - 8bit */
+#define AC_USRSP_EN			(1<<7)
+
 /* configuration default - 32bit */
 #define AC_DEFCFG_SEQUENCE		(0xf<<0)
 #define AC_DEFCFG_DEF_ASSOC		(0xf<<4)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 5e0cca3..288ab07 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -178,6 +178,9 @@
 #define ICH6_INT_CTRL_EN	0x40000000	/* controller interrupt enable bit */
 #define ICH6_INT_GLOBAL_EN	0x80000000	/* global interrupt enable bit */
 
+/* GCTL unsolicited response enable bit */
+#define ICH6_GCTL_UREN		(1<<8)
+
 /* GCTL reset bit */
 #define ICH6_GCTL_RESET		(1<<0)
 
@@ -562,6 +565,9 @@
 		return -EBUSY;
 	}
 
+	/* Accept unsolicited responses */
+	azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UREN);
+
 	/* detect codecs */
 	if (! chip->codec_mask) {
 		chip->codec_mask = azx_readw(chip, STATESTS);
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 2d6e3e3..86f195f 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -408,7 +408,7 @@
 		/* search for an empty channel */
 		for (j = 0; j < cfg->line_outs; j++) {
 			if (! assigned[j]) {
-				spec->dac_nids[i] = i + 0x03;
+				spec->dac_nids[i] = j + 0x03;
 				assigned[j] = 1;
 				break;
 			}
@@ -444,11 +444,10 @@
 			len = snd_hda_get_connections(codec, nid, conn, 4);
 			for (k = 0; k < len; k++)
 				if (conn[k] == spec->dac_nids[i]) {
-					spec->multi_init[j].param = j;
+					spec->multi_init[j].param = k;
 					break;
 				}
 			j++;
-			break;
 		}
 	}
 	return 0;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bab8984..9b85699 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -40,6 +40,7 @@
 	ALC880_W810,
 	ALC880_Z71V,
 	ALC880_AUTO,
+	ALC880_6ST,
 	ALC880_6ST_DIG,
 	ALC880_F1734,
 	ALC880_ASUS,
@@ -119,6 +120,7 @@
 	unsigned int num_kctl_alloc, num_kctl_used;
 	snd_kcontrol_new_t *kctl_alloc;
 	struct hda_input_mux private_imux;
+	hda_nid_t private_dac_nids[4];
 };
 
 
@@ -1547,9 +1549,10 @@
 	{ .pci_subvendor = 0x8086, .pci_subdevice = 0xa100, .config = ALC880_5ST_DIG },
 	{ .pci_subvendor = 0x1565, .pci_subdevice = 0x8202, .config = ALC880_5ST_DIG },
 	{ .pci_subvendor = 0x1019, .pci_subdevice = 0xa880, .config = ALC880_5ST_DIG },
-	{ .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_5ST_DIG },
+	/* { .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_5ST_DIG }, */ /* conflict with 6stack */
 	{ .pci_subvendor = 0x1695, .pci_subdevice = 0x400d, .config = ALC880_5ST_DIG },
-	{ .pci_subvendor = 0x0000, .pci_subdevice = 0x8086, .config = ALC880_5ST_DIG },
+	/* note subvendor = 0 below */
+	/* { .pci_subvendor = 0x0000, .pci_subdevice = 0x8086, .config = ALC880_5ST_DIG }, */
 
 	{ .modelname = "w810", .config = ALC880_W810 },
 	{ .pci_subvendor = 0x161f, .pci_subdevice = 0x203d, .config = ALC880_W810 },
@@ -1557,7 +1560,10 @@
 	{ .modelname = "z71v", .config = ALC880_Z71V },
 	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_Z71V },
 
-	{ .modelname = "6statack-digout", .config = ALC880_6ST_DIG },
+	{ .modelname = "6stack", .config = ALC880_6ST },
+	{ .pci_subvendor = 0x1019, .pci_subdevice = 0xa884, .config = ALC880_6ST }, /* Acer APFV */
+
+	{ .modelname = "6stack-digout", .config = ALC880_6ST_DIG },
 	{ .pci_subvendor = 0x2668, .pci_subdevice = 0x8086, .config = ALC880_6ST_DIG },
 	{ .pci_subvendor = 0x8086, .pci_subdevice = 0x2668, .config = ALC880_6ST_DIG },
 	{ .pci_subvendor = 0x1462, .pci_subdevice = 0x1150, .config = ALC880_6ST_DIG },
@@ -1644,6 +1650,15 @@
 		.channel_mode = alc880_fivestack_modes,
 		.input_mux = &alc880_capture_source,
 	},
+	[ALC880_6ST] = {
+		.mixers = { alc880_six_stack_mixer },
+		.init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
+		.dac_nids = alc880_6st_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
+		.channel_mode = alc880_sixstack_modes,
+		.input_mux = &alc880_6stack_capture_source,
+	},
 	[ALC880_6ST_DIG] = {
 		.mixers = { alc880_six_stack_mixer },
 		.init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
@@ -1656,7 +1671,8 @@
 	},
 	[ALC880_W810] = {
 		.mixers = { alc880_w810_base_mixer },
-		.init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs },
+		.init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs,
+				alc880_gpio2_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
 		.dac_nids = alc880_w810_dac_nids,
 		.dig_out_nid = ALC880_DIGOUT_NID,
@@ -1666,8 +1682,7 @@
 	},
 	[ALC880_Z71V] = {
 		.mixers = { alc880_z71v_mixer },
-		.init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs,
-				alc880_gpio2_init_verbs },
+		.init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids),
 		.dac_nids = alc880_z71v_dac_nids,
 		.dig_out_nid = ALC880_DIGOUT_NID,
@@ -1809,6 +1824,7 @@
 	int i, j;
 
 	memset(assigned, 0, sizeof(assigned));
+	spec->multiout.dac_nids = spec->private_dac_nids;
 
 	/* check the pins hardwired to audio widget */
 	for (i = 0; i < cfg->line_outs; i++) {
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 013be2e..9d503da 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -30,32 +30,37 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <sound/core.h>
+#include <sound/asoundef.h>
 #include "hda_codec.h"
 #include "hda_local.h"
 
 #undef STAC_TEST
 
+#define NUM_CONTROL_ALLOC	32
+#define STAC_HP_EVENT		0x37
+#define STAC_UNSOL_ENABLE 	(AC_USRSP_EN | STAC_HP_EVENT)
+
 struct sigmatel_spec {
+	snd_kcontrol_new_t *mixers[4];
+	unsigned int num_mixers;
+
+	unsigned int surr_switch: 1;
+
 	/* playback */
 	struct hda_multi_out multiout;
-	hda_nid_t playback_nid;
+	hda_nid_t dac_nids[4];
 
 	/* capture */
 	hda_nid_t *adc_nids;
 	unsigned int num_adcs;
 	hda_nid_t *mux_nids;
 	unsigned int num_muxes;
-	hda_nid_t capture_nid;
 	hda_nid_t dig_in_nid;
 
-	/* power management*/
-	hda_nid_t *pstate_nids;
-	unsigned int num_pstates;
-
+#ifdef STAC_TEST
 	/* pin widgets */
 	hda_nid_t *pin_nids;
 	unsigned int num_pins;
-#ifdef STAC_TEST
 	unsigned int *pin_configs;
 #endif
 
@@ -64,16 +69,20 @@
 	snd_kcontrol_new_t *mixer;
 
 	/* capture source */
-	struct hda_input_mux input_mux;
-	char input_labels[HDA_MAX_NUM_INPUTS][16];
+	struct hda_input_mux *input_mux;
 	unsigned int cur_mux[2];
 
 	/* channel mode */
 	unsigned int num_ch_modes;
 	unsigned int cur_ch_mode;
-	const struct sigmatel_channel_mode *channel_modes;
 
-	struct hda_pcm pcm_rec[1];	/* PCM information */
+	struct hda_pcm pcm_rec[2];	/* PCM information */
+
+	/* dynamic controls and input_mux */
+	struct auto_pin_cfg autocfg;
+	unsigned int num_kctl_alloc, num_kctl_used;
+	snd_kcontrol_new_t *kctl_alloc;
+	struct hda_input_mux private_imux;
 };
 
 static hda_nid_t stac9200_adc_nids[1] = {
@@ -88,14 +97,6 @@
         0x02,
 };
 
-static hda_nid_t stac9200_pstate_nids[3] = {
-	0x01, 0x02, 0x03,
-};
-
-static hda_nid_t stac9200_pin_nids[8] = {
-	0x08, 0x09, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12,
-};
-
 static hda_nid_t stac922x_adc_nids[2] = {
         0x06, 0x07,
 };
@@ -104,24 +105,22 @@
         0x12, 0x13,
 };
 
-static hda_nid_t stac922x_dac_nids[4] = {
-        0x02, 0x03, 0x04, 0x05,
-};
-
-static hda_nid_t stac922x_pstate_nids[8] = {
-	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x11,
+#ifdef STAC_TEST
+static hda_nid_t stac9200_pin_nids[8] = {
+	0x08, 0x09, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12,
 };
 
 static hda_nid_t stac922x_pin_nids[10] = {
 	0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
 	0x0f, 0x10, 0x11, 0x15, 0x1b,
 };
+#endif
 
 static int stac92xx_mux_enum_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct sigmatel_spec *spec = codec->spec;
-	return snd_hda_input_mux_info(&spec->input_mux, uinfo);
+	return snd_hda_input_mux_info(spec->input_mux, uinfo);
 }
 
 static int stac92xx_mux_enum_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
@@ -140,26 +139,64 @@
 	struct sigmatel_spec *spec = codec->spec;
 	unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 
-	return snd_hda_input_mux_put(codec, &spec->input_mux, ucontrol,
+	return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
 				     spec->mux_nids[adc_idx], &spec->cur_mux[adc_idx]);
 }
 
-static struct hda_verb stac9200_ch2_init[] = {
+static struct hda_verb stac9200_core_init[] = {
 	/* set dac0mux for dac converter */
-	{ 0x07, 0x701, 0x00},
+	{ 0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
 	{}
 };
 
-static struct hda_verb stac922x_ch2_init[] = {
+static struct hda_verb stac922x_core_init[] = {
 	/* set master volume and direct control */	
-	{ 0x16, 0x70f, 0xff},
+	{ 0x16, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
 	{}
 };
 
-struct sigmatel_channel_mode {
-	unsigned int channels;
-	const struct hda_verb *sequence;
-};
+static int stac922x_channel_modes[3] = {2, 6, 8};
+
+static int stac922x_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = spec->num_ch_modes;
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1;
+	sprintf(uinfo->value.enumerated.name, "%dch",
+		stac922x_channel_modes[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int stac922x_ch_mode_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+
+	ucontrol->value.enumerated.item[0] = spec->cur_ch_mode;
+	return 0;
+}
+
+static int stac922x_ch_mode_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (ucontrol->value.enumerated.item[0] >= spec->num_ch_modes)
+		ucontrol->value.enumerated.item[0] = spec->num_ch_modes;
+	if (ucontrol->value.enumerated.item[0] == spec->cur_ch_mode &&
+	    ! codec->in_resume)
+		return 0;
+
+	spec->cur_ch_mode = ucontrol->value.enumerated.item[0];
+	spec->multiout.max_channels = stac922x_channel_modes[spec->cur_ch_mode];
+
+	return 1;
+}
 
 static snd_kcontrol_new_t stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
@@ -174,13 +211,12 @@
 	},
 	HDA_CODEC_VOLUME("Capture Volume", 0x0a, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x0a, 0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Input Mux Volume", 0x0c, 0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Capture Mux Volume", 0x0c, 0, HDA_OUTPUT),
 	{ } /* end */
 };
 
+/* This needs to be generated dynamically based on sequence */
 static snd_kcontrol_new_t stac922x_mixer[] = {
-	HDA_CODEC_VOLUME("PCM Playback Volume", 0x2, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PCM Playback Switch", 0x2, 0x0, HDA_OUTPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		.name = "Input Source",
@@ -195,14 +231,38 @@
 	{ } /* end */
 };
 
+static snd_kcontrol_new_t stac922x_ch_mode_mixer[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Channel Mode",
+		.info = stac922x_ch_mode_info,
+		.get = stac922x_ch_mode_get,
+		.put = stac922x_ch_mode_put,
+	},
+	{ } /* end */
+};
+
 static int stac92xx_build_controls(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec = codec->spec;
 	int err;
+	int i;
 
 	err = snd_hda_add_new_ctls(codec, spec->mixer);
 	if (err < 0)
 		return err;
+
+	for (i = 0; i < spec->num_mixers; i++) {
+		err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
+		if (err < 0)
+			return err;
+	}
+
+	if (spec->surr_switch) {
+		err = snd_hda_add_new_ctls(codec, stac922x_ch_mode_mixer);
+		if (err < 0)
+			return err;
+	}
 	if (spec->multiout.dig_out_nid) {
 		err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
 		if (err < 0)
@@ -222,9 +282,9 @@
 	0x02a19020, 0x01a19021, 0x90100140, 0x01813122,
 };
 
-static unsigned int stac922x_pin_configs[14] = {
-	0x40000100, 0x40000100, 0x40000100, 0x01114010,
-	0x01813122, 0x40000100, 0x01447010, 0x01c47010,
+static unsigned int stac922x_pin_configs[10] = {
+	0x01014010, 0x01014011, 0x01014012, 0x0221401f,
+	0x01813122, 0x01014014, 0x01441030, 0x01c41030,
 	0x40000100, 0x40000100,
 };
 
@@ -255,170 +315,6 @@
 }
 #endif
 
-static int stac92xx_set_pinctl(struct hda_codec *codec, hda_nid_t nid, unsigned int value)
-{
-	unsigned int pin_ctl;
-
-	pin_ctl = snd_hda_codec_read(codec, nid, 0,
-				     AC_VERB_GET_PIN_WIDGET_CONTROL,
-				     0x00);
-	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
-			    pin_ctl | value);
-
-	return 0;
-}
-
-static int stac92xx_set_vref(struct hda_codec *codec, hda_nid_t nid)
-{
-	unsigned int vref_caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP) >> AC_PINCAP_VREF_SHIFT;
-	unsigned int vref_ctl = AC_PINCTL_VREF_HIZ;
-
-	if (vref_caps & AC_PINCAP_VREF_100)
-		vref_ctl = AC_PINCTL_VREF_100;
-	else if (vref_caps & AC_PINCAP_VREF_80)
-		vref_ctl = AC_PINCTL_VREF_80;
-	else if (vref_caps & AC_PINCAP_VREF_50)
-		vref_ctl = AC_PINCTL_VREF_50;
-	else if (vref_caps & AC_PINCAP_VREF_GRD)
-		vref_ctl = AC_PINCTL_VREF_GRD;
-
-	stac92xx_set_pinctl(codec, nid, vref_ctl);
-	
-	return 0;
-}
-
-/*
- * retrieve the default device type from the default config value
- */
-#define get_defcfg_type(cfg) ((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
-#define get_defcfg_location(cfg) ((cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
-
-static int stac92xx_config_pin(struct hda_codec *codec, hda_nid_t nid, unsigned int pin_cfg)
-{
-	struct sigmatel_spec *spec = codec->spec;
-	u32 location = get_defcfg_location(pin_cfg);
-	char *label;
-	const char *type = NULL;
-	int ainput = 0;
-
-	switch(get_defcfg_type(pin_cfg)) {
-		case AC_JACK_HP_OUT:
-			/* Enable HP amp */
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_HP_EN);
-			/* Fall through */
-		case AC_JACK_SPDIF_OUT:
-		case AC_JACK_LINE_OUT:
-		case AC_JACK_SPEAKER:
-			/* Enable output */
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN);
-			break;
-		case AC_JACK_SPDIF_IN:
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_IN_EN);
-			break;
-		case AC_JACK_MIC_IN:
-			if ((location & 0x0f) == AC_JACK_LOC_FRONT)
-				type = "Front Mic";
-			else
-				type = "Mic";
-			ainput = 1;
-			/* Set vref */
-			stac92xx_set_vref(codec, nid);
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_IN_EN);
-			break;
-		case AC_JACK_CD:
-			type = "CD";
-			ainput = 1;
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_IN_EN);
-			break;
-		case AC_JACK_LINE_IN:
-			if ((location & 0x0f) == AC_JACK_LOC_FRONT)
-				type = "Front Line";
-			else
-				type = "Line";
-			ainput = 1;
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_IN_EN);
-			break;
-		case AC_JACK_AUX:
-			if ((location & 0x0f) == AC_JACK_LOC_FRONT)
-				type = "Front Aux";
-			else
-				type = "Aux";
-			ainput = 1;
-			stac92xx_set_pinctl(codec, nid, AC_PINCTL_IN_EN);
-			break;
-	}
-
-	if (ainput) {
-		hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
-		int i, j, num_cons, index = -1;
-		if (!type)
-			type = "Input";
-		label = spec->input_labels[spec->input_mux.num_items];
-		strcpy(label, type);
-		spec->input_mux.items[spec->input_mux.num_items].label = label;
-		for (i=0; i<spec->num_muxes; i++) {
-			num_cons = snd_hda_get_connections(codec, spec->mux_nids[i], con_lst, HDA_MAX_NUM_INPUTS);
-			for (j=0; j<num_cons; j++)
-				if (con_lst[j] == nid) {
-					index = j;
-					break;
-				}
-			if (index >= 0)
-				break;
-		}
-		spec->input_mux.items[spec->input_mux.num_items].index = index;
-		spec->input_mux.num_items++;
-	}
-
-	return 0;
-}
-
-static int stac92xx_config_pins(struct hda_codec *codec)
-{
-	struct sigmatel_spec *spec = codec->spec;
-	int i;
-	unsigned int pin_cfg;
-
-	for (i=0; i < spec->num_pins; i++) {
-		/* Default to disabled */
-		snd_hda_codec_write(codec, spec->pin_nids[i], 0,
-				    AC_VERB_SET_PIN_WIDGET_CONTROL,
-				    0x00);
-
-		pin_cfg = snd_hda_codec_read(codec, spec->pin_nids[i], 0,
-					     AC_VERB_GET_CONFIG_DEFAULT,
-					     0x00);
-		if (((pin_cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT) == AC_JACK_PORT_NONE)
-			continue;	/* Move on */
-
-		stac92xx_config_pin(codec, spec->pin_nids[i], pin_cfg);
-	}
-
-	return 0;
-}
-
-static int stac92xx_init(struct hda_codec *codec)
-{
-	struct sigmatel_spec *spec = codec->spec;
-	int i;
-
-	for (i=0; i < spec->num_pstates; i++)
-		snd_hda_codec_write(codec, spec->pstate_nids[i], 0,
-				    AC_VERB_SET_POWER_STATE, 0x00);
-
-	mdelay(100);
-
-	snd_hda_sequence_write(codec, spec->init);
-
-#ifdef STAC_TEST
-	stac92xx_set_config_regs(codec);
-#endif
-
-	stac92xx_config_pins(codec);
-
-	return 0;
-}
-
 /*
  * Analog playback callbacks
  */
@@ -430,6 +326,56 @@
 	return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream);
 }
 
+/*
+ * set up the i/o for analog out
+ * when the digital out is available, copy the front out to digital out, too.
+ */
+static int stac92xx_multi_out_analog_prepare(struct hda_codec *codec, struct hda_multi_out *mout,
+				     unsigned int stream_tag,
+				     unsigned int format,
+				     snd_pcm_substream_t *substream)
+{
+	hda_nid_t *nids = mout->dac_nids;
+	int chs = substream->runtime->channels;
+	int i;
+
+	down(&codec->spdif_mutex);
+	if (mout->dig_out_nid && mout->dig_out_used != HDA_DIG_EXCLUSIVE) {
+		if (chs == 2 &&
+		    snd_hda_is_supported_format(codec, mout->dig_out_nid, format) &&
+		    ! (codec->spdif_status & IEC958_AES0_NONAUDIO)) {
+			mout->dig_out_used = HDA_DIG_ANALOG_DUP;
+			/* setup digital receiver */
+			snd_hda_codec_setup_stream(codec, mout->dig_out_nid,
+						   stream_tag, 0, format);
+		} else {
+			mout->dig_out_used = 0;
+			snd_hda_codec_setup_stream(codec, mout->dig_out_nid, 0, 0, 0);
+		}
+	}
+	up(&codec->spdif_mutex);
+
+	/* front */
+	snd_hda_codec_setup_stream(codec, nids[HDA_FRONT], stream_tag, 0, format);
+	if (mout->hp_nid)
+		/* headphone out will just decode front left/right (stereo) */
+		snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag, 0, format);
+	/* surrounds */
+	if (mout->max_channels > 2)
+		for (i = 1; i < mout->num_dacs; i++) {
+			if ((mout->max_channels == 6) && (i == 3))
+				break;
+			if (chs >= (i + 1) * 2) /* independent out */
+				snd_hda_codec_setup_stream(codec, nids[i], stream_tag, i * 2,
+						format);
+			else /* copy front */
+				snd_hda_codec_setup_stream(codec, nids[i], stream_tag, 0,
+						format);
+		}
+	return 0;
+}
+
+
 static int stac92xx_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 					 struct hda_codec *codec,
 					 unsigned int stream_tag,
@@ -437,7 +383,7 @@
 					 snd_pcm_substream_t *substream)
 {
 	struct sigmatel_spec *spec = codec->spec;
-	return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, stream_tag,
+	return stac92xx_multi_out_analog_prepare(codec, &spec->multiout, stream_tag,
 						format, substream);
 }
 
@@ -516,7 +462,7 @@
 static struct hda_pcm_stream stac92xx_pcm_analog_playback = {
 	.substreams = 1,
 	.channels_min = 2,
-	.channels_max = 2,
+	.channels_max = 8,
 	.nid = 0x02, /* NID to query formats and rates */
 	.ops = {
 		.open = stac92xx_playback_pcm_open,
@@ -544,11 +490,9 @@
 	codec->num_pcms = 1;
 	codec->pcm_info = info;
 
-	info->name = "STAC92xx";
+	info->name = "STAC92xx Analog";
 	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_analog_playback;
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->playback_nid;
 	info->stream[SNDRV_PCM_STREAM_CAPTURE] = stac92xx_pcm_analog_capture;
-	info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->capture_nid;
 
 	if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
 		codec->num_pcms++;
@@ -567,21 +511,413 @@
 	return 0;
 }
 
+enum {
+	STAC_CTL_WIDGET_VOL,
+	STAC_CTL_WIDGET_MUTE,
+};
+
+static snd_kcontrol_new_t stac92xx_control_templates[] = {
+	HDA_CODEC_VOLUME(NULL, 0, 0, 0),
+	HDA_CODEC_MUTE(NULL, 0, 0, 0),
+};
+
+/* add dynamic controls */
+static int stac92xx_add_control(struct sigmatel_spec *spec, int type, const char *name, unsigned long val)
+{
+	snd_kcontrol_new_t *knew;
+
+	if (spec->num_kctl_used >= spec->num_kctl_alloc) {
+		int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
+
+		knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
+		if (! knew)
+			return -ENOMEM;
+		if (spec->kctl_alloc) {
+			memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
+			kfree(spec->kctl_alloc);
+		}
+		spec->kctl_alloc = knew;
+		spec->num_kctl_alloc = num;
+	}
+
+	knew = &spec->kctl_alloc[spec->num_kctl_used];
+	*knew = stac92xx_control_templates[type];
+	knew->name = kstrdup(name, GFP_KERNEL);
+	if (! knew->name)
+		return -ENOMEM;
+	knew->private_value = val;
+	spec->num_kctl_used++;
+	return 0;
+}
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t nid;
+	int i;
+
+	/* check the pins hardwired to audio widget */
+	for (i = 0; i < cfg->line_outs; i++) {
+		nid = cfg->line_out_pins[i];
+		spec->multiout.dac_nids[i] = snd_hda_codec_read(codec, nid, 0,
+					AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
+	}
+
+	spec->multiout.num_dacs = cfg->line_outs;
+
+	return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int stac92xx_auto_create_multi_out_ctls(struct sigmatel_spec *spec, const struct auto_pin_cfg *cfg)
+{
+	char name[32];
+	static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
+	hda_nid_t nid;
+	int i, err;
+
+	for (i = 0; i < cfg->line_outs; i++) {
+		if (! spec->multiout.dac_nids[i])
+			continue;
+
+		nid = spec->multiout.dac_nids[i];
+
+		if (i == 2) {
+			/* Center/LFE */
+			if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, "Center Playback Volume",
+					       HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
+				return err;
+			if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, "LFE Playback Volume",
+					       HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+				return err;
+			if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE, "Center Playback Switch",
+					       HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
+				return err;
+			if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE, "LFE Playback Switch",
+					       HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+				return err;
+		} else {
+			sprintf(name, "%s Playback Volume", chname[i]);
+			if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, name,
+					       HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+				return err;
+			sprintf(name, "%s Playback Switch", chname[i]);
+			if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE, name,
+					       HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+				return err;
+		}
+	}
+
+	return 0;
+}
+
+/* add playback controls for HP output */
+static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec, struct auto_pin_cfg *cfg)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t pin = cfg->hp_pin;
+	hda_nid_t nid;
+	int i, err;
+	unsigned int wid_caps;
+
+	if (! pin)
+		return 0;
+
+	wid_caps = snd_hda_param_read(codec, pin, AC_PAR_AUDIO_WIDGET_CAP);
+	if (wid_caps & AC_WCAP_UNSOL_CAP)
+		/* Enable unsolicited responses on the HP widget */
+		snd_hda_codec_write(codec, pin, 0,
+				AC_VERB_SET_UNSOLICITED_ENABLE,
+				STAC_UNSOL_ENABLE);
+
+	nid = snd_hda_codec_read(codec, pin, 0, AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
+	for (i = 0; i < cfg->line_outs; i++) {
+		if (! spec->multiout.dac_nids[i])
+			continue;
+		if (spec->multiout.dac_nids[i] == nid)
+			return 0;
+	}
+
+	spec->multiout.hp_nid = nid;
+
+	/* control HP volume/switch on the output mixer amp */
+	if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, "Headphone Playback Volume",
+					HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+		return err;
+	if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
+					HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+		return err;
+
+	return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int stac92xx_auto_create_analog_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	static char *labels[AUTO_PIN_LAST] = {
+		"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
+	};
+	struct hda_input_mux *imux = &spec->private_imux;
+	hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
+	int i, j, k;
+
+	for (i = 0; i < AUTO_PIN_LAST; i++) {
+		int index = -1;
+		if (cfg->input_pins[i]) {
+			imux->items[imux->num_items].label = labels[i];
+
+			for (j=0; j<spec->num_muxes; j++) {
+				int num_cons = snd_hda_get_connections(codec, spec->mux_nids[j], con_lst, HDA_MAX_NUM_INPUTS);
+				for (k=0; k<num_cons; k++)
+					if (con_lst[k] == cfg->input_pins[i]) {
+						index = k;
+					 	break;
+					}
+				if (index >= 0)
+					break;
+			}
+			imux->items[imux->num_items].index = index;
+			imux->num_items++;
+		}
+	}
+
+	return 0;
+}
+
+static void stac92xx_auto_set_pinctl(struct hda_codec *codec, hda_nid_t nid, int pin_type)
+
+{
+	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+}
+
+static void stac92xx_auto_init_multi_out(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int i;
+
+	for (i = 0; i < spec->autocfg.line_outs; i++) {
+		hda_nid_t nid = spec->autocfg.line_out_pins[i];
+		stac92xx_auto_set_pinctl(codec, nid, AC_PINCTL_OUT_EN);
+	}
+}
+
+static void stac92xx_auto_init_hp_out(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t pin;
+
+	pin = spec->autocfg.hp_pin;
+	if (pin) /* connect to front */
+		stac92xx_auto_set_pinctl(codec, pin, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN);
+}
+
+static int stac922x_parse_auto_config(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int err;
+
+	if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
+		return err;
+	if ((err = stac92xx_auto_fill_dac_nids(codec, &spec->autocfg)) < 0)
+		return err;
+	if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
+		return 0; /* can't find valid pin config */
+
+	if ((err = stac92xx_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
+	    (err = stac92xx_auto_create_hp_ctls(codec, &spec->autocfg)) < 0 ||
+	    (err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg)) < 0)
+		return err;
+
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+	if (spec->multiout.max_channels > 2) {
+		spec->surr_switch = 1;
+		spec->cur_ch_mode = 1;
+		spec->num_ch_modes = 2;
+		if (spec->multiout.max_channels == 8) {
+			spec->cur_ch_mode++;
+			spec->num_ch_modes++;
+		}
+	}
+
+	if (spec->autocfg.dig_out_pin) {
+		spec->multiout.dig_out_nid = 0x08;
+		stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_out_pin, AC_PINCTL_OUT_EN);
+	}
+	if (spec->autocfg.dig_in_pin) {
+		spec->dig_in_nid = 0x09;
+		stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_in_pin, AC_PINCTL_IN_EN);
+	}
+
+	if (spec->kctl_alloc)
+		spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+	spec->input_mux = &spec->private_imux;
+
+	return 1;
+}
+
+static int stac9200_parse_auto_config(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int err;
+
+	if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg)) < 0)
+		return err;
+
+	if ((err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg)) < 0)
+		return err;
+
+	if (spec->autocfg.dig_out_pin) {
+		spec->multiout.dig_out_nid = 0x05;
+		stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_out_pin, AC_PINCTL_OUT_EN);
+	}
+	if (spec->autocfg.dig_in_pin) {
+		spec->dig_in_nid = 0x04;
+		stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_in_pin, AC_PINCTL_IN_EN);
+	}
+
+	if (spec->kctl_alloc)
+		spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+	spec->input_mux = &spec->private_imux;
+
+	return 1;
+}
+
+static int stac92xx_init_pstate(struct hda_codec *codec)
+{
+       hda_nid_t nid, nid_start;
+       int nodes;
+
+	snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_POWER_STATE, 0x00);
+
+       nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
+       for (nid = nid_start; nid < nodes + nid_start; nid++) {
+               unsigned int wid_caps = snd_hda_param_read(codec, nid,
+                                                  AC_PAR_AUDIO_WIDGET_CAP);
+		if (wid_caps & AC_WCAP_POWER)
+			snd_hda_codec_write(codec, nid, 0,
+                                    AC_VERB_SET_POWER_STATE, 0x00);
+	}
+
+	mdelay(100);
+
+	return 0;
+}
+
+static int stac92xx_init(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+
+	stac92xx_init_pstate(codec);
+
+	snd_hda_sequence_write(codec, spec->init);
+
+	stac92xx_auto_init_multi_out(codec);
+	stac92xx_auto_init_hp_out(codec);
+
+	return 0;
+}
+
 static void stac92xx_free(struct hda_codec *codec)
 {
-	kfree(codec->spec);
+	struct sigmatel_spec *spec = codec->spec;
+	int i;
+
+	if (! spec)
+		return;
+
+	if (spec->kctl_alloc) {
+		for (i = 0; i < spec->num_kctl_used; i++)
+			kfree(spec->kctl_alloc[i].name);
+		kfree(spec->kctl_alloc);
+	}
+
+	kfree(spec);
 }
 
+static void stac92xx_set_pinctl(struct hda_codec *codec, hda_nid_t nid,
+				unsigned int flag)
+{
+	unsigned int pin_ctl = snd_hda_codec_read(codec, nid,
+			0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00);
+	snd_hda_codec_write(codec, nid, 0,
+			AC_VERB_SET_PIN_WIDGET_CONTROL,
+			pin_ctl | flag);
+}
+
+static void stac92xx_reset_pinctl(struct hda_codec *codec, hda_nid_t nid,
+				  unsigned int flag)
+{
+	unsigned int pin_ctl = snd_hda_codec_read(codec, nid,
+			0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00);
+	snd_hda_codec_write(codec, nid, 0,
+			AC_VERB_SET_PIN_WIDGET_CONTROL,
+			pin_ctl & ~flag);
+}
+
+static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i, presence;
+
+	if ((res >> 26) != STAC_HP_EVENT)
+		return;
+
+	presence = snd_hda_codec_read(codec, cfg->hp_pin, 0,
+			AC_VERB_GET_PIN_SENSE, 0x00) >> 31;
+
+	if (presence) {
+		/* disable lineouts, enable hp */
+		for (i = 0; i < cfg->line_outs; i++)
+			stac92xx_reset_pinctl(codec, cfg->line_out_pins[i],
+						AC_PINCTL_OUT_EN);
+		stac92xx_set_pinctl(codec, cfg->hp_pin, AC_PINCTL_OUT_EN);
+	} else {
+		/* enable lineouts, disable hp */
+		for (i = 0; i < cfg->line_outs; i++)
+			stac92xx_set_pinctl(codec, cfg->line_out_pins[i],
+						AC_PINCTL_OUT_EN);
+		stac92xx_reset_pinctl(codec, cfg->hp_pin, AC_PINCTL_OUT_EN);
+	}
+} 
+
+#ifdef CONFIG_PM
+static int stac92xx_resume(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int i;
+
+	stac92xx_init(codec);
+	for (i = 0; i < spec->num_mixers; i++)
+		snd_hda_resume_ctls(codec, spec->mixers[i]);
+	if (spec->multiout.dig_out_nid)
+		snd_hda_resume_spdif_out(codec);
+	if (spec->dig_in_nid)
+		snd_hda_resume_spdif_in(codec);
+
+	return 0;
+}
+#endif
+
 static struct hda_codec_ops stac92xx_patch_ops = {
 	.build_controls = stac92xx_build_controls,
 	.build_pcms = stac92xx_build_pcms,
 	.init = stac92xx_init,
 	.free = stac92xx_free,
+	.unsol_event = stac92xx_unsol_event,
+#ifdef CONFIG_PM
+	.resume = stac92xx_resume,
+#endif
 };
 
 static int patch_stac9200(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
+	int err;
 
 	spec  = kcalloc(1, sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -589,26 +925,27 @@
 
 	codec->spec = spec;
 
+#ifdef STAC_TEST
+	spec->pin_nids = stac9200_pin_nids;
+	spec->num_pins = 8;
+	spec->pin_configs = stac9200_pin_configs;
+	stac92xx_set_config_regs(codec);
+#endif
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = 1;
 	spec->multiout.dac_nids = stac9200_dac_nids;
-	spec->multiout.dig_out_nid = 0x05;
-	spec->dig_in_nid = 0x04;
 	spec->adc_nids = stac9200_adc_nids;
 	spec->mux_nids = stac9200_mux_nids;
 	spec->num_muxes = 1;
-	spec->input_mux.num_items = 0;
-	spec->pstate_nids = stac9200_pstate_nids;
-	spec->num_pstates = 3;
-	spec->pin_nids = stac9200_pin_nids;
-#ifdef STAC_TEST
-	spec->pin_configs = stac9200_pin_configs;
-#endif
-	spec->num_pins = 8;
-	spec->init = stac9200_ch2_init;
+
+	spec->init = stac9200_core_init;
 	spec->mixer = stac9200_mixer;
-	spec->playback_nid = 0x02;
-	spec->capture_nid = 0x03;
+
+	err = stac9200_parse_auto_config(codec);
+	if (err < 0) {
+		stac92xx_free(codec);
+		return err;
+	}
 
 	codec->patch_ops = stac92xx_patch_ops;
 
@@ -618,6 +955,7 @@
 static int patch_stac922x(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
+	int err;
 
 	spec  = kcalloc(1, sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -625,26 +963,26 @@
 
 	codec->spec = spec;
 
-	spec->multiout.max_channels = 2;
-	spec->multiout.num_dacs = 4;
-	spec->multiout.dac_nids = stac922x_dac_nids;
-	spec->multiout.dig_out_nid = 0x08;
-	spec->dig_in_nid = 0x09;
+#ifdef STAC_TEST
+	spec->num_pins = 10;
+	spec->pin_nids = stac922x_pin_nids;
+	spec->pin_configs = stac922x_pin_configs;
+	stac92xx_set_config_regs(codec);
+#endif
 	spec->adc_nids = stac922x_adc_nids;
 	spec->mux_nids = stac922x_mux_nids;
 	spec->num_muxes = 2;
-	spec->input_mux.num_items = 0;
-	spec->pstate_nids = stac922x_pstate_nids;
-	spec->num_pstates = 8;
-	spec->pin_nids = stac922x_pin_nids;
-#ifdef STAC_TEST
-	spec->pin_configs = stac922x_pin_configs;
-#endif
-	spec->num_pins = 10;
-	spec->init = stac922x_ch2_init;
+
+	spec->init = stac922x_core_init;
 	spec->mixer = stac922x_mixer;
-	spec->playback_nid = 0x02;
-	spec->capture_nid = 0x06;
+
+	spec->multiout.dac_nids = spec->dac_nids;
+
+	err = stac922x_parse_auto_config(codec);
+	if (err < 0) {
+		stac92xx_free(codec);
+		return err;
+	}
 
 	codec->patch_ops = stac92xx_patch_ops;
 
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index cc16f95..d7af3e4 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -424,6 +424,7 @@
 	unsigned xbox: 1;		/* workaround for Xbox AC'97 detection */
 
 	int spdif_idx;	/* SPDIF BAR index; *_SPBAR or -1 if use PCMOUT */
+	unsigned int sdm_saved;	/* SDM reg value */
 
 	ac97_bus_t *ac97_bus;
 	ac97_t *ac97[3];
@@ -2373,6 +2374,11 @@
 	for (i = 0; i < 3; i++)
 		if (chip->ac97[i])
 			snd_ac97_suspend(chip->ac97[i]);
+	if (chip->device_type == DEVICE_INTEL_ICH4)
+		chip->sdm_saved = igetbyte(chip, ICHREG(SDM));
+
+	if (chip->irq >= 0)
+		free_irq(chip->irq, (void *)chip);
 	pci_disable_device(chip->pci);
 	return 0;
 }
@@ -2384,7 +2390,19 @@
 
 	pci_enable_device(chip->pci);
 	pci_set_master(chip->pci);
-	snd_intel8x0_chip_init(chip, 0);
+	request_irq(chip->irq, snd_intel8x0_interrupt, SA_INTERRUPT|SA_SHIRQ, card->shortname, (void *)chip);
+	synchronize_irq(chip->irq);
+	snd_intel8x0_chip_init(chip, 1);
+
+	/* re-initialize mixer stuff */
+	if (chip->device_type == DEVICE_INTEL_ICH4) {
+		/* enable separate SDINs for ICH4 */
+		iputbyte(chip, ICHREG(SDM), chip->sdm_saved);
+		/* use slot 10/11 for SPDIF */
+		iputdword(chip, ICHREG(GLOB_CNT),
+			  (igetdword(chip, ICHREG(GLOB_CNT)) & ~ICH_PCM_SPDIF_MASK) |
+			  ICH_PCM_SPDIF_1011);
+	}
 
 	/* refill nocache */
 	if (chip->fix_nocache)
@@ -2451,8 +2469,7 @@
 	}
 	do_gettimeofday(&start_time);
 	spin_unlock_irq(&chip->reg_lock);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ / 20);
+	msleep(50);
 	spin_lock_irq(&chip->reg_lock);
 	/* check the position */
 	pos = ichdev->fragsize1;
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 52c5859..39b5e7d 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -1050,11 +1050,6 @@
  * lowlevel functions
  */
 
-#define big_mdelay(msec) do {\
-	set_current_state(TASK_UNINTERRUPTIBLE);\
-	schedule_timeout(((msec) * HZ) / 1000);\
-} while (0)
-	
 static inline void snd_m3_outw(m3_t *chip, u16 value, unsigned long reg)
 {
 	outw(value, chip->iobase + reg);
@@ -1096,7 +1091,7 @@
 static void snd_m3_assp_halt(m3_t *chip)
 {
 	chip->reset_state = snd_m3_inb(chip, DSP_PORT_CONTROL_REG_B) & ~REGB_STOP_CLOCK;
-	big_mdelay(10);
+	msleep(10);
 	snd_m3_outb(chip, chip->reset_state & ~REGB_ENABLE_RESET, DSP_PORT_CONTROL_REG_B);
 }
 
@@ -2108,9 +2103,9 @@
 	 */
 	tmp = inw(io + RING_BUS_CTRL_A);
 	outw(RAC_SDFS_ENABLE|LAC_SDFS_ENABLE, io + RING_BUS_CTRL_A);
-	big_mdelay(20);
+	msleep(20);
 	outw(tmp, io + RING_BUS_CTRL_A);
-	big_mdelay(50);
+	msleep(50);
 #endif
 }
 
@@ -2525,9 +2520,13 @@
 snd_m3_enable_ints(m3_t *chip)
 {
 	unsigned long io = chip->iobase;
+	unsigned short val;
 
 	/* TODO: MPU401 not supported yet */
-	outw(ASSP_INT_ENABLE | HV_INT_ENABLE /*| MPU401_INT_ENABLE*/, io + HOST_INT_CTRL);
+	val = ASSP_INT_ENABLE /*| MPU401_INT_ENABLE*/;
+	if (chip->hv_quirk && (chip->hv_quirk->config & HV_CTRL_ENABLE))
+		val |= HV_INT_ENABLE;
+	outw(val, io + HOST_INT_CTRL);
 	outb(inb(io + ASSP_CONTROL_C) | ASSP_HOST_INT_ENABLE,
 	     io + ASSP_CONTROL_C);
 }
@@ -2589,7 +2588,7 @@
 	snd_pcm_suspend_all(chip->pcm);
 	snd_ac97_suspend(chip->ac97);
 
-	big_mdelay(10); /* give the assp a chance to idle.. */
+	msleep(10); /* give the assp a chance to idle.. */
 
 	snd_m3_assp_halt(chip);
 
@@ -2697,6 +2696,8 @@
 	}
 
 	spin_lock_init(&chip->reg_lock);
+	spin_lock_init(&chip->ac97_lock);
+
 	switch (pci->device) {
 	case PCI_DEVICE_ID_ESS_ALLEGRO:
 	case PCI_DEVICE_ID_ESS_ALLEGRO_1:
@@ -2765,6 +2766,8 @@
 	snd_m3_assp_init(chip);
 	snd_m3_amp_enable(chip, 1);
 
+	tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
+
 	if (request_irq(pci->irq, snd_m3_interrupt, SA_INTERRUPT|SA_SHIRQ,
 			card->driver, (void *)chip)) {
 		snd_printk("unable to grab IRQ %d\n", pci->irq);
@@ -2786,9 +2789,6 @@
 		return err;
 	}
 
-	spin_lock_init(&chip->ac97_lock);
-	tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
-
 	if ((err = snd_m3_mixer(chip)) < 0)
 		return err;
 
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 082c0d0..6c868d9 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -445,9 +445,9 @@
 
 static int mixart_sync_nonblock_events(mixart_mgr_t *mgr)
 {
-	int timeout = HZ;
+	unsigned long timeout = jiffies + HZ;
 	while (atomic_read(&mgr->msg_processed) > 0) {
-		if (! timeout--) {
+		if (time_after(jiffies, timeout)) {
 			snd_printk(KERN_ERR "mixart: cannot process nonblock events!\n");
 			return -EBUSY;
 		}
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index a673cc4..796621d 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -445,6 +445,7 @@
 	u32                   control2_register;     /* cached value */
 	u32                   creg_spdif;
 	u32                   creg_spdif_stream;
+	int                   clock_source_locked;
 	char                 *card_name;	     /* digiface/multiface */
 	HDSP_IO_Type          io_type;               /* ditto, but for code use */
         unsigned short        firmware_rev;
@@ -678,8 +679,7 @@
 		}
 
 		if ((1000 / HZ) < 3000) {
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout((3000 * HZ + 999) / 1000);
+			ssleep(3);
 		} else {
 			mdelay(3000);
 		}
@@ -2095,6 +2095,34 @@
 	return change;
 }
 
+static int snd_hdsp_info_clock_source_lock(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int snd_hdsp_get_clock_source_lock(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol)
+{
+	hdsp_t *hdsp = snd_kcontrol_chip(kcontrol);
+	
+	ucontrol->value.integer.value[0] = hdsp->clock_source_locked;
+	return 0;
+}
+
+static int snd_hdsp_put_clock_source_lock(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol)
+{
+	hdsp_t *hdsp = snd_kcontrol_chip(kcontrol);
+	int change;
+
+	change = (int)ucontrol->value.integer.value[0] != hdsp->clock_source_locked;
+	if (change)
+		hdsp->clock_source_locked = ucontrol->value.integer.value[0];
+	return change;
+}
+
 #define HDSP_DA_GAIN(xname, xindex) \
 { .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \
   .name = xname, \
@@ -3117,6 +3145,15 @@
 HDSP_SPDIF_NON_AUDIO("IEC958 Non-audio Bit", 0),
 /* 'Sample Clock Source' complies with the alsa control naming scheme */ 
 HDSP_CLOCK_SOURCE("Sample Clock Source", 0),
+{
+	/* FIXME: should be PCM or MIXER? */
+	/* .iface = SNDRV_CTL_ELEM_IFACE_PCM, */
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Sample Clock Source Locking",
+	.info = snd_hdsp_info_clock_source_lock,
+	.get = snd_hdsp_get_clock_source_lock,
+	.put = snd_hdsp_put_clock_source_lock,
+},
 HDSP_SYSTEM_CLOCK_MODE("System Clock Mode", 0),
 HDSP_PREF_SYNC_REF("Preferred Sync Reference", 0),
 HDSP_AUTOSYNC_REF("AutoSync Reference", 0),
@@ -3349,6 +3386,7 @@
 	snd_iprintf (buffer, "System Clock Mode: %s\n", system_clock_mode);
 
 	snd_iprintf (buffer, "System Clock Frequency: %d\n", hdsp->system_sample_rate);
+	snd_iprintf (buffer, "System Clock Locked: %s\n", hdsp->clock_source_locked ? "Yes" : "No");
 		
 	snd_iprintf(buffer, "\n");
 
@@ -3853,13 +3891,14 @@
 	 */
 
 	spin_lock_irq(&hdsp->lock);
-	if ((err = hdsp_set_rate(hdsp, params_rate(params), 0)) < 0) {
-		spin_unlock_irq(&hdsp->lock);
-		_snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE);
-		return err;
-	} else {
-		spin_unlock_irq(&hdsp->lock);
+	if (! hdsp->clock_source_locked) {
+		if ((err = hdsp_set_rate(hdsp, params_rate(params), 0)) < 0) {
+			spin_unlock_irq(&hdsp->lock);
+			_snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE);
+			return err;
+		}
 	}
+	spin_unlock_irq(&hdsp->lock);
 
 	if ((err = hdsp_set_interrupt_interval(hdsp, params_period_size(params))) < 0) {
 		_snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
@@ -4284,13 +4323,17 @@
 
 	snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
 	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, &hdsp_hw_constraints_period_sizes);
-	if (hdsp->io_type == H9632) {
-		runtime->hw.channels_min = hdsp->qs_out_channels;
-		runtime->hw.channels_max = hdsp->ss_out_channels;
+	if (hdsp->clock_source_locked) {
+		runtime->hw.rate_min = runtime->hw.rate_max = hdsp->system_sample_rate;
+	} else if (hdsp->io_type == H9632) {
 		runtime->hw.rate_max = 192000;
 		runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
 		snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hdsp_hw_constraints_9632_sample_rates);
 	}
+	if (hdsp->io_type == H9632) {
+		runtime->hw.channels_min = hdsp->qs_out_channels;
+		runtime->hw.channels_max = hdsp->ss_out_channels;
+	}	
 	
 	snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
 			     snd_hdsp_hw_rule_out_channels, hdsp,
@@ -5036,8 +5079,7 @@
 	if (!is_9652 && !is_9632) {
 		/* we wait 2 seconds to let freshly inserted cardbus cards do their hardware init */
  		if ((1000 / HZ) < 2000) {
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout((2000 * HZ + 999) / 1000);
+			ssleep(2);
 		} else {
 			mdelay(2000);
 		}
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index a09b0fb..29d89bfb 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -472,6 +472,7 @@
 		break;
 	default:
 		snd_BUG();
+		return;
 	}
 
 	outb(voice->number, TRID_REG(trident, T4D_LFO_GC_CIR));
@@ -3152,8 +3153,7 @@
 	switch (mode) {
 		case GAMEPORT_MODE_COOKED:
 			outb(GAMEPORT_MODE_ADC, TRID_REG(chip, GAMEPORT_GCR));
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout(1 + 20 * HZ / 1000); /* 20msec */
+			msleep(20);
 			return 0;
 		case GAMEPORT_MODE_RAW:
 			outb(0, TRID_REG(chip, GAMEPORT_GCR));
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 42c48f0..4889600 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -547,8 +547,7 @@
 	int err;
 	err = snd_via82xx_codec_ready(chip, ac97->num);
 	/* here we need to wait fairly for long time.. */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ/2);
+	msleep(500);
 }
 
 static void snd_via82xx_codec_write(ac97_t *ac97,
@@ -1847,7 +1846,7 @@
 static int snd_via82xx_chip_init(via82xx_t *chip)
 {
 	unsigned int val;
-	int max_count;
+	unsigned long end_time;
 	unsigned char pval;
 
 #if 0 /* broken on K7M? */
@@ -1889,14 +1888,14 @@
 	}
 
 	/* wait until codec ready */
-	max_count = ((3 * HZ) / 4) + 1;
+	end_time = jiffies + msecs_to_jiffies(750);
 	do {
 		pci_read_config_byte(chip->pci, VIA_ACLINK_STAT, &pval);
 		if (pval & VIA_ACLINK_C00_READY) /* primary codec ready */
 			break;
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1);
-	} while (--max_count > 0);
+	} while (time_before(jiffies, end_time));
 
 	if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
 		snd_printk("AC'97 codec is not ready [0x%x]\n", val);
@@ -1905,7 +1904,7 @@
 	snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
 				 VIA_REG_AC97_SECONDARY_VALID |
 				 (VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
-	max_count = ((3 * HZ) / 4) + 1;
+	end_time = jiffies + msecs_to_jiffies(750);
 	snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
 				 VIA_REG_AC97_SECONDARY_VALID |
 				 (VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
@@ -1916,7 +1915,7 @@
 		}
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(1);
-	} while (--max_count > 0);
+	} while (time_before(jiffies, end_time));
 	/* This is ok, the most of motherboards have only one codec */
 
       __ac97_ok2:
@@ -2178,7 +2177,7 @@
 		{ .subvendor = 0x147b, .subdevice = 0x1413, .action = VIA_DXS_ENABLE }, /* ABIT KV8 Pro */
 		{ .subvendor = 0x147b, .subdevice = 0x1415, .action = VIA_DXS_NO_VRA }, /* Abit AV8 */
 		{ .subvendor = 0x14ff, .subdevice = 0x0403, .action = VIA_DXS_ENABLE }, /* Twinhead mobo */
-		{ .subvendor = 0x14ff, .subdevice = 0x0408, .action = VIA_DXS_NO_VRA }, /* Twinhead mobo */
+		{ .subvendor = 0x14ff, .subdevice = 0x0408, .action = VIA_DXS_SRC }, /* Twinhead laptop */
 		{ .subvendor = 0x1584, .subdevice = 0x8120, .action = VIA_DXS_ENABLE }, /* Gericom/Targa/Vobis/Uniwill laptop */
 		{ .subvendor = 0x1584, .subdevice = 0x8123, .action = VIA_DXS_NO_VRA }, /* Uniwill (Targa Visionary XP-210) */
 		{ .subvendor = 0x161f, .subdevice = 0x202b, .action = VIA_DXS_NO_VRA }, /* Amira Note book */
@@ -2187,6 +2186,7 @@
 		{ .subvendor = 0x1695, .subdevice = 0x3005, .action = VIA_DXS_ENABLE }, /* EPoX EP-8K9A */
 		{ .subvendor = 0x1849, .subdevice = 0x3059, .action = VIA_DXS_NO_VRA }, /* ASRock K7VM2 */
 		{ .subvendor = 0x1919, .subdevice = 0x200a, .action = VIA_DXS_NO_VRA }, /* Soltek SL-K8Tpro-939 */
+		{ .subvendor = 0x4005, .subdevice = 0x4710, .action = VIA_DXS_SRC },	/* MSI K7T266 Pro2 (MS-6380 V2.0) BIOS 3.7 */
 		{ } /* terminator */
 	};
 	struct dxs_whitelist *w;
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 5896d28..4a9779c 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -408,8 +408,7 @@
 	int err;
 	err = snd_via82xx_codec_ready(chip, ac97->num);
 	/* here we need to wait fairly for long time.. */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(HZ/2);
+	msleep(500);
 }
 
 static void snd_via82xx_codec_write(ac97_t *ac97,
@@ -923,7 +922,7 @@
 static int snd_via82xx_chip_init(via82xx_t *chip)
 {
 	unsigned int val;
-	int max_count;
+	unsigned long end_time;
 	unsigned char pval;
 
 	pci_read_config_byte(chip->pci, VIA_MC97_CTRL, &pval);
@@ -962,14 +961,14 @@
 	}
 
 	/* wait until codec ready */
-	max_count = ((3 * HZ) / 4) + 1;
+	end_time = jiffies + msecs_to_jiffies(750);
 	do {
 		pci_read_config_byte(chip->pci, VIA_ACLINK_STAT, &pval);
 		if (pval & VIA_ACLINK_C00_READY) /* primary codec ready */
 			break;
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1);
-	} while (--max_count > 0);
+	} while (time_before(jiffies, end_time));
 
 	if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
 		snd_printk("AC'97 codec is not ready [0x%x]\n", val);
@@ -977,7 +976,7 @@
 	snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
 				 VIA_REG_AC97_SECONDARY_VALID |
 				 (VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
-	max_count = ((3 * HZ) / 4) + 1;
+	end_time = jiffies + msecs_to_jiffies(750);
 	snd_via82xx_codec_xwrite(chip, VIA_REG_AC97_READ |
 				 VIA_REG_AC97_SECONDARY_VALID |
 				 (VIA_REG_AC97_CODEC_ID_SECONDARY << VIA_REG_AC97_CODEC_ID_SHIFT));
@@ -988,7 +987,7 @@
 		}
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(1);
-	} while (--max_count > 0);
+	} while (time_before(jiffies, end_time));
 	/* This is ok, the most of motherboards have only one codec */
 
       __ac97_ok2:
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index 2ae7961..d54f88a 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -84,16 +84,16 @@
 
 static int snd_ymfpci_codec_ready(ymfpci_t *chip, int secondary)
 {
-	signed long end_time;
+	unsigned long end_time;
 	u32 reg = secondary ? YDSXGR_SECSTATUSADR : YDSXGR_PRISTATUSADR;
 	
-	end_time = (jiffies + ((3 * HZ) / 4)) + 1;
+	end_time = jiffies + msecs_to_jiffies(750);
 	do {
 		if ((snd_ymfpci_readw(chip, reg) & 0x8000) == 0)
 			return 0;
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1);
-	} while (end_time - (signed long)jiffies >= 0);
+	} while (time_before(jiffies, end_time));
 	snd_printk("codec_ready: codec %i is not ready [0x%x]\n", secondary, snd_ymfpci_readw(chip, reg));
 	return -EBUSY;
 }
diff --git a/sound/pcmcia/Kconfig b/sound/pcmcia/Kconfig
index 3611e29..5d1b0b7 100644
--- a/sound/pcmcia/Kconfig
+++ b/sound/pcmcia/Kconfig
@@ -8,23 +8,12 @@
 	depends on SND && PCMCIA && ISA
 	select SND_VX_LIB
 	help
-	  Say Y here to include support for Digigram VXpocket
-	  soundcards.
+	  Say Y here to include support for Digigram VXpocket and
+	  VXpocket 440 soundcards.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-vxpocket.
 
-config SND_VXP440
-	tristate "Digigram VXpocket 440"
-	depends on SND && PCMCIA && ISA
-	select SND_VX_LIB
-	help
-	  Say Y here to include support for Digigram VXpocket 440
-	  soundcards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called snd-vxp440.
-
 config SND_PDAUDIOCF
 	tristate "Sound Core PDAudioCF"
 	depends on SND && PCMCIA && ISA
diff --git a/sound/pcmcia/vx/Makefile b/sound/pcmcia/vx/Makefile
index f35dfa1..54971f0 100644
--- a/sound/pcmcia/vx/Makefile
+++ b/sound/pcmcia/vx/Makefile
@@ -3,9 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-snd-vx-cs-objs := vx_entry.o vxp_ops.o vxp_mixer.o
-snd-vxpocket-objs := vxpocket.o
-snd-vxp440-objs := vxp440.o
+snd-vxpocket-objs := vxpocket.o vxp_ops.o vxp_mixer.o
 
-obj-$(CONFIG_SND_VXPOCKET) += snd-vxpocket.o snd-vx-cs.o
-obj-$(CONFIG_SND_VXP440) += snd-vxp440.o snd-vx-cs.o
+obj-$(CONFIG_SND_VXPOCKET) += snd-vxpocket.o
diff --git a/sound/pcmcia/vx/vx_entry.c b/sound/pcmcia/vx/vx_entry.c
deleted file mode 100644
index df7a39b..0000000
--- a/sound/pcmcia/vx/vx_entry.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Driver for Digigram VXpocket soundcards
- *
- * PCMCIA entry part
- *
- * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <sound/driver.h>
-#include <sound/core.h>
-#include "vxpocket.h"
-#include <pcmcia/ciscode.h>
-#include <pcmcia/cisreg.h>
-
-
-MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
-MODULE_DESCRIPTION("Common routines for Digigram PCMCIA VX drivers");
-MODULE_LICENSE("GPL");
-
-/*
- * prototypes
- */
-static void vxpocket_config(dev_link_t *link);
-
-
-static void vxpocket_release(dev_link_t *link)
-{
-	if (link->state & DEV_CONFIG) {
-		/* release cs resources */
-		pcmcia_release_configuration(link->handle);
-		pcmcia_release_io(link->handle, &link->io);
-		pcmcia_release_irq(link->handle, &link->irq);
-		link->state &= ~DEV_CONFIG;
-	}
-}
-
-/*
- * destructor
- */
-static int snd_vxpocket_free(vx_core_t *chip)
-{
-	struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
-	struct snd_vxp_entry *hw;
-	dev_link_t *link = &vxp->link;
-
-	vxpocket_release(link);
-
-	/* Break the link with Card Services */
-	if (link->handle)
-		pcmcia_deregister_client(link->handle);
-
-	hw = vxp->hw_entry;
-	if (hw)
-		hw->card_list[vxp->index] = NULL;
-	chip->card = NULL;
-	kfree(chip->dev);
-
-	snd_vx_free_firmware(chip);
-	kfree(chip);
-	return 0;
-}
-
-static int snd_vxpocket_dev_free(snd_device_t *device)
-{
-	vx_core_t *chip = device->device_data;
-	return snd_vxpocket_free(chip);
-}
-
-/*
- * snd_vxpocket_attach - attach callback for cs
- * @hw: the hardware information
- */
-dev_link_t *snd_vxpocket_attach(struct snd_vxp_entry *hw)
-{
-	client_reg_t client_reg;	/* Register with cardmgr */
-	dev_link_t *link;		/* Info for cardmgr */
-	int i, ret;
-	vx_core_t *chip;
-	struct snd_vxpocket *vxp;
-	snd_card_t *card;
-	static snd_device_ops_t ops = {
-		.dev_free =	snd_vxpocket_dev_free,
-	};
-
-	snd_printdd(KERN_DEBUG "vxpocket_attach called\n");
-	/* find an empty slot from the card list */
-	for (i = 0; i < SNDRV_CARDS; i++) {
-		if (! hw->card_list[i])
-			break;
-	}
-	if (i >= SNDRV_CARDS) {
-		snd_printk(KERN_ERR "vxpocket: too many cards found\n");
-		return NULL;
-	}
-	if (! hw->enable_table[i])
-		return NULL; /* disabled explicitly */
-
-	/* ok, create a card instance */
-	card = snd_card_new(hw->index_table[i], hw->id_table[i], THIS_MODULE, 0);
-	if (card == NULL) {
-		snd_printk(KERN_ERR "vxpocket: cannot create a card instance\n");
-		return NULL;
-	}
-
-	chip = snd_vx_create(card, hw->hardware, hw->ops,
-			     sizeof(struct snd_vxpocket) - sizeof(vx_core_t));
-	if (! chip)
-		return NULL;
-
-#ifdef SND_VX_FW_LOADER
-	/* fake a device here since pcmcia doesn't give a valid device... */
-	chip->dev = kcalloc(1, sizeof(*chip->dev), GFP_KERNEL);
-	if (! chip->dev) {
-		snd_printk(KERN_ERR "vxp: can't malloc chip->dev\n");
-		kfree(chip);
-		snd_card_free(card);
-		return NULL;
-	}
-	device_initialize(chip->dev);
-	sprintf(chip->dev->bus_id, "vxpocket%d", i);
-#endif
-
-	if (snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops) < 0) {
-		kfree(chip);
-		snd_card_free(card);
-		return NULL;
-	}
-
-	vxp = (struct snd_vxpocket *)chip;
-	vxp->index = i;
-	vxp->hw_entry = hw;
-	chip->ibl.size = hw->ibl[i];
-	hw->card_list[i] = chip;
-
-	link = &vxp->link;
-	link->priv = chip;
-
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.NumPorts1 = 16;
-
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	// link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-	link->irq.Handler = &snd_vx_irq_handler;
-	link->irq.Instance = chip;
-
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.Vcc = 50;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-	link->conf.ConfigIndex = 1;
-	link->conf.Present = PRESENT_OPTION;
-
-	/* Register with Card Services */
-	memset(&client_reg, 0, sizeof(client_reg));
-	client_reg.dev_info = hw->dev_info;
-	client_reg.Version = 0x0210;
-	client_reg.event_callback_args.client_data = link;
-
-	ret = pcmcia_register_client(&link->handle, &client_reg);
-	if (ret != CS_SUCCESS) {
-		cs_error(link->handle, RegisterClient, ret);
-		snd_card_free(card);
-		return NULL;
-	}
-
-	/* Chain drivers */
-	link->next = hw->dev_list;
-	hw->dev_list = link;
-
-	/* snd_card_set_pm_callback(card, snd_vxpocket_suspend, snd_vxpocket_resume, chip); */
-
-	return link;
-}
-
-
-/**
- * snd_vxpocket_assign_resources - initialize the hardware and card instance.
- * @port: i/o port for the card
- * @irq: irq number for the card
- *
- * this function assigns the specified port and irq, boot the card,
- * create pcm and control instances, and initialize the rest hardware.
- *
- * returns 0 if successful, or a negative error code.
- */
-static int snd_vxpocket_assign_resources(vx_core_t *chip, int port, int irq)
-{
-	int err;
-	snd_card_t *card = chip->card;
-	struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
-
-	snd_printdd(KERN_DEBUG "vxpocket assign resources: port = 0x%x, irq = %d\n", port, irq);
-	vxp->port = port;
-
-	sprintf(card->shortname, "Digigram %s", card->driver);
-	sprintf(card->longname, "%s at 0x%x, irq %i",
-		card->shortname, port, irq);
-
-	chip->irq = irq;
-
-	if ((err = snd_vx_setup_firmware(chip)) < 0)
-		return err;
-
-	return 0;
-}
-
-
-/*
- * snd_vxpocket_detach - detach callback for cs
- * @hw: the hardware information
- */
-void snd_vxpocket_detach(struct snd_vxp_entry *hw, dev_link_t *link)
-{
-	vx_core_t *chip;
-
-	if (! link)
-		return;
-
-	chip = link->priv;
-
-	snd_printdd(KERN_DEBUG "vxpocket_detach called\n");
-	/* Remove the interface data from the linked list */
-	if (hw) {
-		dev_link_t **linkp;
-		/* Locate device structure */
-		for (linkp = &hw->dev_list; *linkp; linkp = &(*linkp)->next)
-			if (*linkp == link) {
-				*linkp = link->next;
-				break;
-			}
-	}
-	chip->chip_status |= VX_STAT_IS_STALE; /* to be sure */
-	snd_card_disconnect(chip->card);
-	snd_card_free_in_thread(chip->card);
-}
-
-/*
- * configuration callback
- */
-
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-static void vxpocket_config(dev_link_t *link)
-{
-	client_handle_t handle = link->handle;
-	vx_core_t *chip = link->priv;
-	struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
-	tuple_t tuple;
-	cisparse_t *parse = NULL;
-	u_short buf[32];
-	int last_fn, last_ret;
-
-	snd_printdd(KERN_DEBUG "vxpocket_config called\n");
-	parse = kmalloc(sizeof(*parse), GFP_KERNEL);
-	if (! parse) {
-		snd_printk(KERN_ERR "vx: cannot allocate\n");
-		return;
-	}
-	tuple.Attributes = 0;
-	tuple.TupleData = (cisdata_t *)buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
-	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
-	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, parse));
-	link->conf.ConfigBase = parse->config.base;
-	link->conf.Present = parse->config.rmask[0];
-
-	/* Configure card */
-	link->state |= DEV_CONFIG;
-
-	CS_CHECK(RequestIO, pcmcia_request_io(handle, &link->io));
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
-
-	if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
-		goto failed;
-
-	link->dev = &vxp->node;
-	link->state &= ~DEV_CONFIG_PENDING;
-	kfree(parse);
-	return;
-
-cs_failed:
-	cs_error(link->handle, last_fn, last_ret);
-failed:
-	pcmcia_release_configuration(link->handle);
-	pcmcia_release_io(link->handle, &link->io);
-	pcmcia_release_irq(link->handle, &link->irq);
-	link->state &= ~DEV_CONFIG;
-	kfree(parse);
-}
-
-
-/*
- * event callback
- */
-int vxpocket_event(event_t event, int priority, event_callback_args_t *args)
-{
-	dev_link_t *link = args->client_data;
-	vx_core_t *chip = link->priv;
-
-	switch (event) {
-	case CS_EVENT_CARD_REMOVAL:
-		snd_printdd(KERN_DEBUG "CARD_REMOVAL..\n");
-		link->state &= ~DEV_PRESENT;
-		if (link->state & DEV_CONFIG) {
-			chip->chip_status |= VX_STAT_IS_STALE;
-		}
-		break;
-	case CS_EVENT_CARD_INSERTION:
-		snd_printdd(KERN_DEBUG "CARD_INSERTION..\n");
-		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
-		vxpocket_config(link);
-		break;
-#ifdef CONFIG_PM
-	case CS_EVENT_PM_SUSPEND:
-		snd_printdd(KERN_DEBUG "SUSPEND\n");
-		link->state |= DEV_SUSPEND;
-		if (chip && chip->card->pm_suspend) {
-			snd_printdd(KERN_DEBUG "snd_vx_suspend calling\n");
-			chip->card->pm_suspend(chip->card, PMSG_SUSPEND);
-		}
-		/* Fall through... */
-	case CS_EVENT_RESET_PHYSICAL:
-		snd_printdd(KERN_DEBUG "RESET_PHYSICAL\n");
-		if (link->state & DEV_CONFIG)
-			pcmcia_release_configuration(link->handle);
-		break;
-	case CS_EVENT_PM_RESUME:
-		snd_printdd(KERN_DEBUG "RESUME\n");
-		link->state &= ~DEV_SUSPEND;
-		/* Fall through... */
-	case CS_EVENT_CARD_RESET:
-		snd_printdd(KERN_DEBUG "CARD_RESET\n");
-		if (DEV_OK(link)) {
-			//struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
-			snd_printdd(KERN_DEBUG "requestconfig...\n");
-			pcmcia_request_configuration(link->handle, &link->conf);
-			if (chip && chip->card->pm_resume) {
-				snd_printdd(KERN_DEBUG "calling snd_vx_resume\n");
-				chip->card->pm_resume(chip->card);
-			}
-		}
-		snd_printdd(KERN_DEBUG "resume done!\n");
-		break;
-#endif
-	}
-	return 0;
-}
-
-/*
- * exported stuffs
- */
-EXPORT_SYMBOL(snd_vxpocket_ops);
-EXPORT_SYMBOL(snd_vxpocket_attach);
-EXPORT_SYMBOL(vxpocket_event);
-EXPORT_SYMBOL(snd_vxpocket_detach);
diff --git a/sound/pcmcia/vx/vxp440.c b/sound/pcmcia/vx/vxp440.c
deleted file mode 100644
index 59190a8..0000000
--- a/sound/pcmcia/vx/vxp440.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#define COMPILE_VXP440
-
-/*
- add the following as /etc/pcmcia/vxp440.conf:
-
-  device "snd-vxp440"
-    class "audio" module "snd-vxp440"
-
-  card "Digigram VX-POCKET440"
-    manfid 0x01f1, 0x0100
-    bind "snd-vxp440"
-*/
-
-#include "vxpocket.c"
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 62d6fa1..3a82161 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -24,21 +24,17 @@
 #include <linux/moduleparam.h>
 #include <sound/core.h>
 #include "vxpocket.h"
+#include <pcmcia/ciscode.h>
+#include <pcmcia/cisreg.h>
 #include <sound/initval.h>
 
 /*
  */
 
-#ifdef COMPILE_VXP440
-#define CARD_NAME	"VXPocket440"
-#else
-#define CARD_NAME	"VXPocket"
-#endif
-
 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
-MODULE_DESCRIPTION("Digigram " CARD_NAME);
+MODULE_DESCRIPTION("Digigram VXPocket");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Digigram," CARD_NAME "}}");
+MODULE_SUPPORTED_DEVICE("{{Digigram,VXPocket},{Digigram,VXPocket440}}");
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
@@ -46,82 +42,405 @@
 static int ibl[SNDRV_CARDS];
 
 module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
+MODULE_PARM_DESC(index, "Index value for VXPocket soundcard.");
 module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
+MODULE_PARM_DESC(id, "ID string for VXPocket soundcard.");
 module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
+MODULE_PARM_DESC(enable, "Enable VXPocket soundcard.");
 module_param_array(ibl, int, NULL, 0444);
-MODULE_PARM_DESC(ibl, "Capture IBL size for " CARD_NAME " soundcard.");
+MODULE_PARM_DESC(ibl, "Capture IBL size for VXPocket soundcard.");
  
 
 /*
  */
 
-#ifdef COMPILE_VXP440
+static unsigned int card_alloc;
+static dev_link_t *dev_list;		/* Linked list of devices */
+static dev_info_t dev_info = "snd-vxpocket";
 
-/* 1 DSP, 1 sync UER, 1 sync World Clock (NIY) */
-/* SMPTE (NIY) */
-/* 2 stereo analog input (line/micro) */
-/* 2 stereo analog output */
-/* Only output levels can be modified */
-/* UER, but only for the first two inputs and outputs. */
 
-#define NUM_CODECS	2
-#define CARD_TYPE	VX_TYPE_VXP440
-#define DEV_INFO	"snd-vxp440"
+static int vxpocket_event(event_t event, int priority, event_callback_args_t *args);
 
-#else
 
-/* 1 DSP, 1 sync UER */
-/* 1 programmable clock (NIY) */
-/* 1 stereo analog input (line/micro) */
-/* 1 stereo analog output */
-/* Only output levels can be modified */
+/*
+ */
+static void vxpocket_release(dev_link_t *link)
+{
+	if (link->state & DEV_CONFIG) {
+		/* release cs resources */
+		pcmcia_release_configuration(link->handle);
+		pcmcia_release_io(link->handle, &link->io);
+		pcmcia_release_irq(link->handle, &link->irq);
+		link->state &= ~DEV_CONFIG;
+	}
+	if (link->handle) {
+		/* Break the link with Card Services */
+		pcmcia_deregister_client(link->handle);
+		link->handle = NULL;
+	}
+}
 
-#define NUM_CODECS	1
-#define CARD_TYPE	VX_TYPE_VXPOCKET
-#define DEV_INFO	"snd-vxpocket"
+/*
+ * destructor, called from snd_card_free_in_thread()
+ */
+static int snd_vxpocket_dev_free(snd_device_t *device)
+{
+	vx_core_t *chip = device->device_data;
 
-#endif
+	snd_vx_free_firmware(chip);
+	kfree(chip);
+	return 0;
+}
 
-static dev_info_t dev_info = DEV_INFO;
 
-static struct snd_vx_hardware vxp_hw = {
-	.name = CARD_NAME,
-	.type = CARD_TYPE,
+/*
+ * Hardware information
+ */
+
+/* VX-pocket V2
+ *
+ * 1 DSP, 1 sync UER
+ * 1 programmable clock (NIY)
+ * 1 stereo analog input (line/micro)
+ * 1 stereo analog output
+ * Only output levels can be modified
+ */
+
+static struct snd_vx_hardware vxpocket_hw = {
+	.name = "VXPocket",
+	.type = VX_TYPE_VXPOCKET,
 
 	/* hardware specs */
-	.num_codecs = NUM_CODECS,
-	.num_ins = NUM_CODECS,
-	.num_outs = NUM_CODECS,
+	.num_codecs = 1,
+	.num_ins = 1,
+	.num_outs = 1,
 	.output_level_max = VX_ANALOG_OUT_LEVEL_MAX,
 };	
 
-static struct snd_vxp_entry hw_entry = {
-	.dev_info = &dev_info,
+/* VX-pocket 440
+ *
+ * 1 DSP, 1 sync UER, 1 sync World Clock (NIY)
+ * SMPTE (NIY)
+ * 2 stereo analog input (line/micro)
+ * 2 stereo analog output
+ * Only output levels can be modified
+ * UER, but only for the first two inputs and outputs.
+ */
 
-	/* module parameters */
-	.index_table = index,
-	.id_table = id,
-	.enable_table = enable,
-	.ibl = ibl,
+static struct snd_vx_hardware vxp440_hw = {
+	.name = "VXPocket440",
+	.type = VX_TYPE_VXP440,
 
-	/* h/w config */
-	.hardware = &vxp_hw,
-	.ops = &snd_vxpocket_ops,
-};
+	/* hardware specs */
+	.num_codecs = 2,
+	.num_ins = 2,
+	.num_outs = 2,
+	.output_level_max = VX_ANALOG_OUT_LEVEL_MAX,
+};	
+
+
+/*
+ * create vxpocket instance
+ */
+static struct snd_vxpocket *snd_vxpocket_new(snd_card_t *card, int ibl)
+{
+	client_reg_t client_reg;	/* Register with cardmgr */
+	dev_link_t *link;		/* Info for cardmgr */
+	vx_core_t *chip;
+	struct snd_vxpocket *vxp;
+	int ret;
+	static snd_device_ops_t ops = {
+		.dev_free =	snd_vxpocket_dev_free,
+	};
+
+	chip = snd_vx_create(card, &vxpocket_hw, &snd_vxpocket_ops,
+			     sizeof(struct snd_vxpocket) - sizeof(vx_core_t));
+	if (! chip)
+		return NULL;
+
+	if (snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops) < 0) {
+		kfree(chip);
+		return NULL;
+	}
+	chip->ibl.size = ibl;
+
+	vxp = (struct snd_vxpocket *)chip;
+
+	link = &vxp->link;
+	link->priv = chip;
+
+	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+	link->io.NumPorts1 = 16;
+
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Handler = &snd_vx_irq_handler;
+	link->irq.Instance = chip;
+
+	link->conf.Attributes = CONF_ENABLE_IRQ;
+	link->conf.Vcc = 50;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->conf.ConfigIndex = 1;
+	link->conf.Present = PRESENT_OPTION;
+
+	/* Register with Card Services */
+	memset(&client_reg, 0, sizeof(client_reg));
+	client_reg.dev_info = &dev_info;
+	client_reg.EventMask = 
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL
+#ifdef CONFIG_PM
+		| CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET
+		| CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME
+#endif
+		;
+	client_reg.event_handler = &vxpocket_event;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != CS_SUCCESS) {
+		cs_error(link->handle, RegisterClient, ret);
+		return NULL;
+	}
+
+	return vxp;
+}
+
+
+/**
+ * snd_vxpocket_assign_resources - initialize the hardware and card instance.
+ * @port: i/o port for the card
+ * @irq: irq number for the card
+ *
+ * this function assigns the specified port and irq, boot the card,
+ * create pcm and control instances, and initialize the rest hardware.
+ *
+ * returns 0 if successful, or a negative error code.
+ */
+static int snd_vxpocket_assign_resources(vx_core_t *chip, int port, int irq)
+{
+	int err;
+	snd_card_t *card = chip->card;
+	struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
+
+	snd_printdd(KERN_DEBUG "vxpocket assign resources: port = 0x%x, irq = %d\n", port, irq);
+	vxp->port = port;
+
+	sprintf(card->shortname, "Digigram %s", card->driver);
+	sprintf(card->longname, "%s at 0x%x, irq %i",
+		card->shortname, port, irq);
+
+	chip->irq = irq;
+
+	if ((err = snd_vx_setup_firmware(chip)) < 0)
+		return err;
+
+	return 0;
+}
+
+
+/*
+ * configuration callback
+ */
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void vxpocket_config(dev_link_t *link)
+{
+	client_handle_t handle = link->handle;
+	vx_core_t *chip = link->priv;
+	struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
+	tuple_t tuple;
+	cisparse_t *parse;
+	u_short buf[32];
+	int last_fn, last_ret;
+
+	snd_printdd(KERN_DEBUG "vxpocket_config called\n");
+	parse = kmalloc(sizeof(*parse), GFP_KERNEL);
+	if (! parse) {
+		snd_printk(KERN_ERR "vx: cannot allocate\n");
+		return;
+	}
+	tuple.Attributes = 0;
+	tuple.TupleData = (cisdata_t *)buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, parse));
+	link->conf.ConfigBase = parse->config.base;
+	link->conf.Present = parse->config.rmask[0];
+
+	/* redefine hardware record according to the VERSION1 string */
+	tuple.DesiredTuple = CISTPL_VERS_1;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, parse));
+	if (! strcmp(parse->version_1.str + parse->version_1.ofs[1], "VX-POCKET")) {
+		snd_printdd("VX-pocket is detected\n");
+	} else {
+		snd_printdd("VX-pocket 440 is detected\n");
+		/* overwrite the hardware information */
+		chip->hw = &vxp440_hw;
+		chip->type = vxp440_hw.type;
+		strcpy(chip->card->driver, vxp440_hw.name);
+	}
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+
+	CS_CHECK(RequestIO, pcmcia_request_io(handle, &link->io));
+	CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+
+	chip->dev = &handle_to_dev(link->handle);
+
+	if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
+		goto failed;
+
+	link->dev = &vxp->node;
+	link->state &= ~DEV_CONFIG_PENDING;
+	kfree(parse);
+	return;
+
+cs_failed:
+	cs_error(link->handle, last_fn, last_ret);
+failed:
+	pcmcia_release_configuration(link->handle);
+	pcmcia_release_io(link->handle, &link->io);
+	pcmcia_release_irq(link->handle, &link->irq);
+	link->state &= ~DEV_CONFIG;
+	kfree(parse);
+}
+
+
+/*
+ * event callback
+ */
+static int vxpocket_event(event_t event, int priority, event_callback_args_t *args)
+{
+	dev_link_t *link = args->client_data;
+	vx_core_t *chip = link->priv;
+
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		snd_printdd(KERN_DEBUG "CARD_REMOVAL..\n");
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG)
+			chip->chip_status |= VX_STAT_IS_STALE;
+		break;
+	case CS_EVENT_CARD_INSERTION:
+		snd_printdd(KERN_DEBUG "CARD_INSERTION..\n");
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		vxpocket_config(link);
+		break;
+#ifdef CONFIG_PM
+	case CS_EVENT_PM_SUSPEND:
+		snd_printdd(KERN_DEBUG "SUSPEND\n");
+		link->state |= DEV_SUSPEND;
+		if (chip && chip->card->pm_suspend) {
+			snd_printdd(KERN_DEBUG "snd_vx_suspend calling\n");
+			chip->card->pm_suspend(chip->card, PMSG_SUSPEND);
+		}
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		snd_printdd(KERN_DEBUG "RESET_PHYSICAL\n");
+		if (link->state & DEV_CONFIG)
+			pcmcia_release_configuration(link->handle);
+		break;
+	case CS_EVENT_PM_RESUME:
+		snd_printdd(KERN_DEBUG "RESUME\n");
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		snd_printdd(KERN_DEBUG "CARD_RESET\n");
+		if (DEV_OK(link)) {
+			//struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
+			snd_printdd(KERN_DEBUG "requestconfig...\n");
+			pcmcia_request_configuration(link->handle, &link->conf);
+			if (chip && chip->card->pm_resume) {
+				snd_printdd(KERN_DEBUG "calling snd_vx_resume\n");
+				chip->card->pm_resume(chip->card);
+			}
+		}
+		snd_printdd(KERN_DEBUG "resume done!\n");
+		break;
+#endif
+	}
+	return 0;
+}
+
 
 /*
  */
 static dev_link_t *vxp_attach(void)
 {
-	return snd_vxpocket_attach(&hw_entry);
+	snd_card_t *card;
+	struct snd_vxpocket *vxp;
+	int i;
+
+	/* find an empty slot from the card list */
+	for (i = 0; i < SNDRV_CARDS; i++) {
+		if (! card_alloc & (1 << i))
+			break;
+	}
+	if (i >= SNDRV_CARDS) {
+		snd_printk(KERN_ERR "vxpocket: too many cards found\n");
+		return NULL;
+	}
+	if (! enable[i])
+		return NULL; /* disabled explicitly */
+
+	/* ok, create a card instance */
+	card = snd_card_new(index[i], id[i], THIS_MODULE, 0);
+	if (card == NULL) {
+		snd_printk(KERN_ERR "vxpocket: cannot create a card instance\n");
+		return NULL;
+	}
+
+	vxp = snd_vxpocket_new(card, ibl[i]);
+	if (! vxp) {
+		snd_card_free(card);
+		return NULL;
+	}
+
+	vxp->index = index[i];
+	card_alloc |= 1 << i;
+
+	/* Chain drivers */
+	vxp->link.next = dev_list;
+	dev_list = &vxp->link;
+
+	return &vxp->link;
 }
 
 static void vxp_detach(dev_link_t *link)
 {
-	snd_vxpocket_detach(&hw_entry, link);
+	struct snd_vxpocket *vxp;
+	vx_core_t *chip;
+	dev_link_t **linkp;
+
+	if (! link)
+		return;
+
+	vxp = link->priv;
+	chip = (vx_core_t *)vxp;
+	card_alloc &= ~(1 << vxp->index);
+
+	/* Remove the interface data from the linked list */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+		if (*linkp == link) {
+			*linkp = link->next;
+			break;
+		}
+
+	chip->chip_status |= VX_STAT_IS_STALE; /* to be sure */
+	snd_card_disconnect(chip->card);
+	vxpocket_release(link);
+	snd_card_free_in_thread(chip->card);
 }
 
 /*
@@ -137,7 +456,7 @@
 static struct pcmcia_driver vxp_cs_driver = {
 	.owner		= THIS_MODULE,
 	.drv		= {
-		.name	= DEV_INFO,
+		.name	= "snd-vxpocket",
 	},
 	.attach		= vxp_attach,
 	.detach		= vxp_detach,
@@ -152,7 +471,7 @@
 static void __exit exit_vxpocket(void)
 {
 	pcmcia_unregister_driver(&vxp_cs_driver);
-	BUG_ON(hw_entry.dev_list != NULL);
+	BUG_ON(dev_list != NULL);
 }
 
 module_init(init_vxpocket);
diff --git a/sound/pcmcia/vx/vxpocket.h b/sound/pcmcia/vx/vxpocket.h
index 4462c04..70754aa 100644
--- a/sound/pcmcia/vx/vxpocket.h
+++ b/sound/pcmcia/vx/vxpocket.h
@@ -28,24 +28,6 @@
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
-struct snd_vxp_entry {
-	dev_info_t *dev_info;
-
-	/* module parameters */
-	int *index_table;
-	char **id_table;
-	int *enable_table;
-	int *ibl;
-
-	/* h/w config */
-	struct snd_vx_hardware *hardware;
-	struct snd_vx_ops *ops;
-
-	/* slots */
-	vx_core_t *card_list[SNDRV_CARDS];
-	dev_link_t *dev_list;		/* Linked list of devices */
-};
-
 struct snd_vxpocket {
 
 	vx_core_t core;
@@ -57,8 +39,7 @@
 	unsigned int regCDSP;	/* current CDSP register */
 	unsigned int regDIALOG;	/* current DIALOG register */
 
-	int index;
-	struct snd_vxp_entry *hw_entry;
+	int index;	/* card index */
 
 	/* pcmcia stuff */
 	dev_link_t link;
@@ -70,12 +51,6 @@
 void vx_set_mic_boost(vx_core_t *chip, int boost);
 void vx_set_mic_level(vx_core_t *chip, int level);
 
-/*
- * pcmcia stuff
- */
-dev_link_t *snd_vxpocket_attach(struct snd_vxp_entry *hw);
-void snd_vxpocket_detach(struct snd_vxp_entry *hw, dev_link_t *link);
-
 int vxp_add_mic_controls(vx_core_t *chip);
 
 /* Constants used to access the CDSP register (0x08). */
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 061e52d..758ca1b 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -103,7 +103,7 @@
 	snd_pmac_awacs_write_noreg(chip, 1, chip->awacs_reg[1]);
 	if (chip->manufacturer == 0x1)
 		/* delay for broken crystal part */
-		big_mdelay(750);
+		msleep(750);
 	snd_pmac_awacs_write_noreg(chip, 1,
 				   chip->awacs_reg[1] | MASK_RECALIBRATE | MASK_CMUTE | MASK_AMUTE);
 	snd_pmac_awacs_write_noreg(chip, 1, chip->awacs_reg[1]);
@@ -653,10 +653,10 @@
 {
 	if (machine_is_compatible("PowerBook3,1")
 	    || machine_is_compatible("PowerBook3,2")) {
-		big_mdelay(100);
+		msleep(100);
 		snd_pmac_awacs_write_reg(chip, 1,
 			chip->awacs_reg[1] & ~MASK_PAROUT);
-		big_mdelay(300);
+		msleep(300);
 	}
 
 	awacs_restore_all_regs(chip);
diff --git a/sound/ppc/pmac.h b/sound/ppc/pmac.h
index 582db52..ae3bb6c 100644
--- a/sound/ppc/pmac.h
+++ b/sound/ppc/pmac.h
@@ -212,9 +212,4 @@
 
 int snd_pmac_add_automute(pmac_t *chip);
 
-#define big_mdelay(msec) do {\
-	set_current_state(TASK_UNINTERRUPTIBLE);\
-	schedule_timeout(((msec) * HZ + 999) / 1000);\
-} while (0)
-
 #endif /* __PMAC_H */
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 36c5d5d..b94437c 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -945,7 +945,7 @@
 			check_mute(chip, &mix->line_mute, 0, mix->auto_mute_notify,
 				   chip->lineout_sw_ctl);
 		if (mix->anded_reset)
-			big_mdelay(10);
+			msleep(10);
 		check_mute(chip, &mix->amp_mute, 1, mix->auto_mute_notify,
 			   chip->speaker_sw_ctl);
 		mix->drc_enable = 0;
@@ -954,7 +954,7 @@
 		check_mute(chip, &mix->amp_mute, 0, mix->auto_mute_notify,
 			   chip->speaker_sw_ctl);
 		if (mix->anded_reset)
-			big_mdelay(10);
+			msleep(10);
 		check_mute(chip, &mix->hp_mute, 1, mix->auto_mute_notify,
 			   chip->master_sw_ctl);
 		if (mix->line_mute.addr != 0)
@@ -1109,22 +1109,22 @@
 		DBG("(I) codec anded reset !\n");
 		write_audio_gpio(&mix->hp_mute, 0);
 		write_audio_gpio(&mix->amp_mute, 0);
-		big_mdelay(200);
+		msleep(200);
 		write_audio_gpio(&mix->hp_mute, 1);
 		write_audio_gpio(&mix->amp_mute, 1);
-		big_mdelay(100);
+		msleep(100);
 		write_audio_gpio(&mix->hp_mute, 0);
 		write_audio_gpio(&mix->amp_mute, 0);
-		big_mdelay(100);
+		msleep(100);
 	} else {
 		DBG("(I) codec normal reset !\n");
 
 		write_audio_gpio(&mix->audio_reset, 0);
-		big_mdelay(200);
+		msleep(200);
 		write_audio_gpio(&mix->audio_reset, 1);
-		big_mdelay(100);
+		msleep(100);
 		write_audio_gpio(&mix->audio_reset, 0);
-		big_mdelay(100);
+		msleep(100);
 	}
 }
 
diff --git a/sound/sparc/Kconfig b/sound/sparc/Kconfig
index 2358df1..25a8a55 100644
--- a/sound/sparc/Kconfig
+++ b/sound/sparc/Kconfig
@@ -7,12 +7,30 @@
 	tristate "Sun AMD7930"
 	depends on SBUS && SND
 	select SND_PCM
+	help
+	  Say Y here to include support for AMD7930 sound device on Sun.
 
-#  dep_tristate 'Sun DBRI' CONFIG_SND_SUN_DBRI $CONFIG_SND
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sun-amd7930.
+
 config SND_SUN_CS4231
 	tristate "Sun CS4231"
 	depends on SND
 	select SND_PCM
+	help
+	  Say Y here to include support for CS4231 sound device on Sun.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sun-cs4231.
+
+config SND_SUN_DBRI
+	tristate "Sun DBRI"
+	depends on SND && SBUS
+	select SND_PCM
+	help
+	  Say Y here to include support for DBRI sound device on Sun.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-sun-dbri.
 
 endmenu
-
diff --git a/sound/sparc/Makefile b/sound/sparc/Makefile
index 6809cc9..3cd89c6 100644
--- a/sound/sparc/Makefile
+++ b/sound/sparc/Makefile
@@ -4,9 +4,9 @@
 #
 
 snd-sun-amd7930-objs := amd7930.o
-#snd-sun-dbri-objs := dbri.o
 snd-sun-cs4231-objs := cs4231.o
+snd-sun-dbri-objs := dbri.o
 
 obj-$(CONFIG_SND_SUN_AMD7930) += snd-sun-amd7930.o
-#obj-$(CONFIG_SND_SUN_DBRI) += snd-sun-dbri.o
 obj-$(CONFIG_SND_SUN_CS4231) += snd-sun-cs4231.o
+obj-$(CONFIG_SND_SUN_DBRI) += snd-sun-dbri.o
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
new file mode 100644
index 0000000..941c7b1
--- /dev/null
+++ b/sound/sparc/dbri.c
@@ -0,0 +1,2729 @@
+/*
+ * Driver for DBRI sound chip found on Sparcs.
+ * Copyright (C) 2004 Martin Habets (mhabets@users.sourceforge.net)
+ *
+ * Based entirely upon drivers/sbus/audio/dbri.c which is:
+ * Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
+ * Copyright (C) 1998, 1999 Brent Baccala (baccala@freesoft.org)
+ *
+ * This is the lowlevel driver for the DBRI & MMCODEC duo used for ISDN & AUDIO
+ * on Sun SPARCstation 10, 20, LX and Voyager models.
+ *
+ * - DBRI: AT&T T5900FX Dual Basic Rates ISDN Interface. It is a 32 channel
+ *   data time multiplexer with ISDN support (aka T7259)
+ *   Interfaces: SBus,ISDN NT & TE, CHI, 4 bits parallel.
+ *   CHI: (spelled ki) Concentration Highway Interface (AT&T or Intel bus ?).
+ *   Documentation:
+ *   - "STP 4000SBus Dual Basic Rate ISDN (DBRI) Tranceiver" from
+ *     Sparc Technology Business (courtesy of Sun Support)
+ *   - Data sheet of the T7903, a newer but very similar ISA bus equivalent
+ *     available from the Lucent (formarly AT&T microelectronics) home
+ *     page.
+ *   - http://www.freesoft.org/Linux/DBRI/
+ * - MMCODEC: Crystal Semiconductor CS4215 16 bit Multimedia Audio Codec
+ *   Interfaces: CHI, Audio In & Out, 2 bits parallel
+ *   Documentation: from the Crystal Semiconductor home page.
+ *
+ * The DBRI is a 32 pipe machine, each pipe can transfer some bits between
+ * memory and a serial device (long pipes, nr 0-15) or between two serial
+ * devices (short pipes, nr 16-31), or simply send a fixed data to a serial
+ * device (short pipes).
+ * A timeslot defines the bit-offset and nr of bits read from a serial device.
+ * The timeslots are linked to 6 circular lists, one for each direction for
+ * each serial device (NT,TE,CHI). A timeslot is associated to 1 or 2 pipes
+ * (the second one is a monitor/tee pipe, valid only for serial input).
+ *
+ * The mmcodec is connected via the CHI bus and needs the data & some
+ * parameters (volume, balance, output selection) timemultiplexed in 8 byte
+ * chunks. It also has a control mode, which serves for audio format setting.
+ *
+ * Looking at the CS4215 data sheet it is easy to set up 2 or 4 codecs on
+ * the same CHI bus, so I thought perhaps it is possible to use the onboard
+ * & the speakerbox codec simultanously, giving 2 (not very independent :-)
+ * audio devices. But the SUN HW group decided against it, at least on my
+ * LX the speakerbox connector has at least 1 pin missing and 1 wrongly
+ * connected.
+ */
+
+#include <sound/driver.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/sbus.h>
+#include <asm/atomic.h>
+
+MODULE_AUTHOR("Rudolf Koenig, Brent Baccala and Martin Habets");
+MODULE_DESCRIPTION("Sun DBRI");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Sun,DBRI}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;	/* Enable this card */
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for Sun DBRI soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for Sun DBRI soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable Sun DBRI soundcard.");
+
+#define DBRI_DEBUG
+
+#define D_INT	(1<<0)
+#define D_GEN	(1<<1)
+#define D_CMD	(1<<2)
+#define D_MM	(1<<3)
+#define D_USR	(1<<4)
+#define D_DESC	(1<<5)
+
+static int dbri_debug = 0;
+module_param(dbri_debug, int, 0444);
+MODULE_PARM_DESC(dbri_debug, "Debug value for Sun DBRI soundcard.");
+
+#ifdef DBRI_DEBUG
+static char *cmds[] = {
+	"WAIT", "PAUSE", "JUMP", "IIQ", "REX", "SDP", "CDP", "DTS",
+	"SSP", "CHI", "NT", "TE", "CDEC", "TEST", "CDM", "RESRV"
+};
+
+#define dprintk(a, x...) if(dbri_debug & a) printk(KERN_DEBUG x)
+
+#define DBRI_CMD(cmd, intr, value) ((cmd << 28) |			\
+				    (1 << 27) | \
+				    value)
+#else
+#define dprintk(a, x...)
+
+#define DBRI_CMD(cmd, intr, value) ((cmd << 28) |			\
+				    (intr << 27) | \
+				    value)
+#endif				/* DBRI_DEBUG */
+
+/***************************************************************************
+	CS4215 specific definitions and structures
+****************************************************************************/
+
+struct cs4215 {
+	__u8 data[4];		/* Data mode: Time slots 5-8 */
+	__u8 ctrl[4];		/* Ctrl mode: Time slots 1-4 */
+	__u8 onboard;
+	__u8 offset;		/* Bit offset from frame sync to time slot 1 */
+	volatile __u32 status;
+	volatile __u32 version;
+	__u8 precision;		/* In bits, either 8 or 16 */
+	__u8 channels;		/* 1 or 2 */
+};
+
+/*
+ * Control mode first 
+ */
+
+/* Time Slot 1, Status register */
+#define CS4215_CLB	(1<<2)	/* Control Latch Bit */
+#define CS4215_OLB	(1<<3)	/* 1: line: 2.0V, speaker 4V */
+				/* 0: line: 2.8V, speaker 8V */
+#define CS4215_MLB	(1<<4)	/* 1: Microphone: 20dB gain disabled */
+#define CS4215_RSRVD_1  (1<<5)
+
+/* Time Slot 2, Data Format Register */
+#define CS4215_DFR_LINEAR16	0
+#define CS4215_DFR_ULAW		1
+#define CS4215_DFR_ALAW		2
+#define CS4215_DFR_LINEAR8	3
+#define CS4215_DFR_STEREO	(1<<2)
+static struct {
+	unsigned short freq;
+	unsigned char xtal;
+	unsigned char csval;
+} CS4215_FREQ[] = {
+	{  8000, (1 << 4), (0 << 3) },
+	{ 16000, (1 << 4), (1 << 3) },
+	{ 27429, (1 << 4), (2 << 3) },	/* Actually 24428.57 */
+	{ 32000, (1 << 4), (3 << 3) },
+     /* {    NA, (1 << 4), (4 << 3) }, */
+     /* {    NA, (1 << 4), (5 << 3) }, */
+	{ 48000, (1 << 4), (6 << 3) },
+	{  9600, (1 << 4), (7 << 3) },
+	{  5513, (2 << 4), (0 << 3) },	/* Actually 5512.5 */
+	{ 11025, (2 << 4), (1 << 3) },
+	{ 18900, (2 << 4), (2 << 3) },
+	{ 22050, (2 << 4), (3 << 3) },
+	{ 37800, (2 << 4), (4 << 3) },
+	{ 44100, (2 << 4), (5 << 3) },
+	{ 33075, (2 << 4), (6 << 3) },
+	{  6615, (2 << 4), (7 << 3) },
+	{ 0, 0, 0}
+};
+
+#define CS4215_HPF	(1<<7)	/* High Pass Filter, 1: Enabled */
+
+#define CS4215_12_MASK	0xfcbf	/* Mask off reserved bits in slot 1 & 2 */
+
+/* Time Slot 3, Serial Port Control register */
+#define CS4215_XEN	(1<<0)	/* 0: Enable serial output */
+#define CS4215_XCLK	(1<<1)	/* 1: Master mode: Generate SCLK */
+#define CS4215_BSEL_64	(0<<2)	/* Bitrate: 64 bits per frame */
+#define CS4215_BSEL_128	(1<<2)
+#define CS4215_BSEL_256	(2<<2)
+#define CS4215_MCK_MAST (0<<4)	/* Master clock */
+#define CS4215_MCK_XTL1 (1<<4)	/* 24.576 MHz clock source */
+#define CS4215_MCK_XTL2 (2<<4)	/* 16.9344 MHz clock source */
+#define CS4215_MCK_CLK1 (3<<4)	/* Clockin, 256 x Fs */
+#define CS4215_MCK_CLK2 (4<<4)	/* Clockin, see DFR */
+
+/* Time Slot 4, Test Register */
+#define CS4215_DAD	(1<<0)	/* 0:Digital-Dig loop, 1:Dig-Analog-Dig loop */
+#define CS4215_ENL	(1<<1)	/* Enable Loopback Testing */
+
+/* Time Slot 5, Parallel Port Register */
+/* Read only here and the same as the in data mode */
+
+/* Time Slot 6, Reserved  */
+
+/* Time Slot 7, Version Register  */
+#define CS4215_VERSION_MASK 0xf	/* Known versions 0/C, 1/D, 2/E */
+
+/* Time Slot 8, Reserved  */
+
+/*
+ * Data mode
+ */
+/* Time Slot 1-2: Left Channel Data, 2-3: Right Channel Data  */
+
+/* Time Slot 5, Output Setting  */
+#define CS4215_LO(v)	v	/* Left Output Attenuation 0x3f: -94.5 dB */
+#define CS4215_LE	(1<<6)	/* Line Out Enable */
+#define CS4215_HE	(1<<7)	/* Headphone Enable */
+
+/* Time Slot 6, Output Setting  */
+#define CS4215_RO(v)	v	/* Right Output Attenuation 0x3f: -94.5 dB */
+#define CS4215_SE	(1<<6)	/* Speaker Enable */
+#define CS4215_ADI	(1<<7)	/* A/D Data Invalid: Busy in calibration */
+
+/* Time Slot 7, Input Setting */
+#define CS4215_LG(v)	v	/* Left Gain Setting 0xf: 22.5 dB */
+#define CS4215_IS	(1<<4)	/* Input Select: 1=Microphone, 0=Line */
+#define CS4215_OVR	(1<<5)	/* 1: Overrange condition occurred */
+#define CS4215_PIO0	(1<<6)	/* Parallel I/O 0 */
+#define CS4215_PIO1	(1<<7)
+
+/* Time Slot 8, Input Setting */
+#define CS4215_RG(v)	v	/* Right Gain Setting 0xf: 22.5 dB */
+#define CS4215_MA(v)	(v<<4)	/* Monitor Path Attenuation 0xf: mute */
+
+/***************************************************************************
+		DBRI specific definitions and structures
+****************************************************************************/
+
+/* DBRI main registers */
+#define REG0	0x00UL		/* Status and Control */
+#define REG1	0x04UL		/* Mode and Interrupt */
+#define REG2	0x08UL		/* Parallel IO */
+#define REG3	0x0cUL		/* Test */
+#define REG8	0x20UL		/* Command Queue Pointer */
+#define REG9	0x24UL		/* Interrupt Queue Pointer */
+
+#define DBRI_NO_CMDS	64
+#define DBRI_NO_INTS	1	/* Note: the value of this define was
+				 * originally 2.  The ringbuffer to store
+				 * interrupts in dma is currently broken.
+				 * This is a temporary fix until the ringbuffer
+				 * is fixed.
+				 */
+#define DBRI_INT_BLK	64
+#define DBRI_NO_DESCS	64
+#define DBRI_NO_PIPES	32
+
+#define DBRI_MM_ONB	1
+#define DBRI_MM_SB	2
+
+#define DBRI_REC	0
+#define DBRI_PLAY	1
+#define DBRI_NO_STREAMS	2
+
+/* One transmit/receive descriptor */
+struct dbri_mem {
+	volatile __u32 word1;
+	volatile __u32 ba;	/* Transmit/Receive Buffer Address */
+	volatile __u32 nda;	/* Next Descriptor Address */
+	volatile __u32 word4;
+};
+
+/* This structure is in a DMA region where it can accessed by both
+ * the CPU and the DBRI
+ */
+struct dbri_dma {
+	volatile s32 cmd[DBRI_NO_CMDS];	/* Place for commands       */
+	volatile s32 intr[DBRI_NO_INTS * DBRI_INT_BLK];	/* Interrupt field  */
+	struct dbri_mem desc[DBRI_NO_DESCS];	/* Xmit/receive descriptors */
+};
+
+#define dbri_dma_off(member, elem)	\
+	((u32)(unsigned long)		\
+	 (&(((struct dbri_dma *)0)->member[elem])))
+
+enum in_or_out { PIPEinput, PIPEoutput };
+
+struct dbri_pipe {
+	u32 sdp;		/* SDP command word */
+	enum in_or_out direction;
+	int nextpipe;		/* Next pipe in linked list */
+	int prevpipe;
+	int cycle;		/* Offset of timeslot (bits) */
+	int length;		/* Length of timeslot (bits) */
+	int first_desc;		/* Index of first descriptor */
+	int desc;		/* Index of active descriptor */
+	volatile __u32 *recv_fixed_ptr;	/* Ptr to receive fixed data */
+};
+
+struct dbri_desc {
+	int inuse;		/* Boolean flag */
+	int next;		/* Index of next desc, or -1 */
+	unsigned int len;
+};
+
+/* Per stream (playback or record) information */
+typedef struct dbri_streaminfo {
+	snd_pcm_substream_t *substream;
+	u32 dvma_buffer;	/* Device view of Alsa DMA buffer */
+	int left;		/* # of bytes left in DMA buffer  */
+	int size;		/* Size of DMA buffer             */
+	size_t offset;		/* offset in user buffer          */
+	int pipe;		/* Data pipe used                 */
+	int left_gain;		/* mixer elements                 */
+	int right_gain;
+	int balance;
+} dbri_streaminfo_t;
+
+/* This structure holds the information for both chips (DBRI & CS4215) */
+typedef struct snd_dbri {
+	snd_card_t *card;	/* ALSA card */
+	snd_pcm_t *pcm;
+
+	int regs_size, irq;	/* Needed for unload */
+	struct sbus_dev *sdev;	/* SBUS device info */
+	spinlock_t lock;
+
+	volatile struct dbri_dma *dma;	/* Pointer to our DMA block */
+	u32 dma_dvma;		/* DBRI visible DMA address */
+
+	void __iomem *regs;	/* dbri HW regs */
+	int dbri_version;	/* 'e' and up is OK */
+	int dbri_irqp;		/* intr queue pointer */
+	int wait_seen;
+
+	struct dbri_pipe pipes[DBRI_NO_PIPES];	/* DBRI's 32 data pipes */
+	struct dbri_desc descs[DBRI_NO_DESCS];
+
+	int chi_in_pipe;
+	int chi_out_pipe;
+	int chi_bpf;
+
+	struct cs4215 mm;	/* mmcodec special info */
+				/* per stream (playback/record) info */
+	struct dbri_streaminfo stream_info[DBRI_NO_STREAMS];
+
+	struct snd_dbri *next;
+} snd_dbri_t;
+
+/* Needed for the ALSA macros to work */
+#define chip_t snd_dbri_t
+
+#define DBRI_MAX_VOLUME		63	/* Output volume */
+#define DBRI_MAX_GAIN		15	/* Input gain */
+#define DBRI_RIGHT_BALANCE	255
+#define DBRI_MID_BALANCE	(DBRI_RIGHT_BALANCE >> 1)
+
+/* DBRI Reg0 - Status Control Register - defines. (Page 17) */
+#define D_P		(1<<15)	/* Program command & queue pointer valid */
+#define D_G		(1<<14)	/* Allow 4-Word SBus Burst */
+#define D_S		(1<<13)	/* Allow 16-Word SBus Burst */
+#define D_E		(1<<12)	/* Allow 8-Word SBus Burst */
+#define D_X		(1<<7)	/* Sanity Timer Disable */
+#define D_T		(1<<6)	/* Permit activation of the TE interface */
+#define D_N		(1<<5)	/* Permit activation of the NT interface */
+#define D_C		(1<<4)	/* Permit activation of the CHI interface */
+#define D_F		(1<<3)	/* Force Sanity Timer Time-Out */
+#define D_D		(1<<2)	/* Disable Master Mode */
+#define D_H		(1<<1)	/* Halt for Analysis */
+#define D_R		(1<<0)	/* Soft Reset */
+
+/* DBRI Reg1 - Mode and Interrupt Register - defines. (Page 18) */
+#define D_LITTLE_END	(1<<8)	/* Byte Order */
+#define D_BIG_END	(0<<8)	/* Byte Order */
+#define D_MRR		(1<<4)	/* Multiple Error Ack on SBus (readonly) */
+#define D_MLE		(1<<3)	/* Multiple Late Error on SBus (readonly) */
+#define D_LBG		(1<<2)	/* Lost Bus Grant on SBus (readonly) */
+#define D_MBE		(1<<1)	/* Burst Error on SBus (readonly) */
+#define D_IR		(1<<0)	/* Interrupt Indicator (readonly) */
+
+/* DBRI Reg2 - Parallel IO Register - defines. (Page 18) */
+#define D_ENPIO3	(1<<7)	/* Enable Pin 3 */
+#define D_ENPIO2	(1<<6)	/* Enable Pin 2 */
+#define D_ENPIO1	(1<<5)	/* Enable Pin 1 */
+#define D_ENPIO0	(1<<4)	/* Enable Pin 0 */
+#define D_ENPIO		(0xf0)	/* Enable all the pins */
+#define D_PIO3		(1<<3)	/* Pin 3: 1: Data mode, 0: Ctrl mode */
+#define D_PIO2		(1<<2)	/* Pin 2: 1: Onboard PDN */
+#define D_PIO1		(1<<1)	/* Pin 1: 0: Reset */
+#define D_PIO0		(1<<0)	/* Pin 0: 1: Speakerbox PDN */
+
+/* DBRI Commands (Page 20) */
+#define D_WAIT		0x0	/* Stop execution */
+#define D_PAUSE		0x1	/* Flush long pipes */
+#define D_JUMP		0x2	/* New command queue */
+#define D_IIQ		0x3	/* Initialize Interrupt Queue */
+#define D_REX		0x4	/* Report command execution via interrupt */
+#define D_SDP		0x5	/* Setup Data Pipe */
+#define D_CDP		0x6	/* Continue Data Pipe (reread NULL Pointer) */
+#define D_DTS		0x7	/* Define Time Slot */
+#define D_SSP		0x8	/* Set short Data Pipe */
+#define D_CHI		0x9	/* Set CHI Global Mode */
+#define D_NT		0xa	/* NT Command */
+#define D_TE		0xb	/* TE Command */
+#define D_CDEC		0xc	/* Codec setup */
+#define D_TEST		0xd	/* No comment */
+#define D_CDM		0xe	/* CHI Data mode command */
+
+/* Special bits for some commands */
+#define D_PIPE(v)      ((v)<<0)	/* Pipe Nr: 0-15 long, 16-21 short */
+
+/* Setup Data Pipe */
+/* IRM */
+#define D_SDP_2SAME	(1<<18)	/* Report 2nd time in a row value rcvd */
+#define D_SDP_CHANGE	(2<<18)	/* Report any changes */
+#define D_SDP_EVERY	(3<<18)	/* Report any changes */
+#define D_SDP_EOL	(1<<17)	/* EOL interrupt enable */
+#define D_SDP_IDLE	(1<<16)	/* HDLC idle interrupt enable */
+
+/* Pipe data MODE */
+#define D_SDP_MEM	(0<<13)	/* To/from memory */
+#define D_SDP_HDLC	(2<<13)
+#define D_SDP_HDLC_D	(3<<13)	/* D Channel (prio control) */
+#define D_SDP_SER	(4<<13)	/* Serial to serial */
+#define D_SDP_FIXED	(6<<13)	/* Short only */
+#define D_SDP_MODE(v)	((v)&(7<<13))
+
+#define D_SDP_TO_SER	(1<<12)	/* Direction */
+#define D_SDP_FROM_SER	(0<<12)	/* Direction */
+#define D_SDP_MSB	(1<<11)	/* Bit order within Byte */
+#define D_SDP_LSB	(0<<11)	/* Bit order within Byte */
+#define D_SDP_P		(1<<10)	/* Pointer Valid */
+#define D_SDP_A		(1<<8)	/* Abort */
+#define D_SDP_C		(1<<7)	/* Clear */
+
+/* Define Time Slot */
+#define D_DTS_VI	(1<<17)	/* Valid Input Time-Slot Descriptor */
+#define D_DTS_VO	(1<<16)	/* Valid Output Time-Slot Descriptor */
+#define D_DTS_INS	(1<<15)	/* Insert Time Slot */
+#define D_DTS_DEL	(0<<15)	/* Delete Time Slot */
+#define D_DTS_PRVIN(v) ((v)<<10)	/* Previous In Pipe */
+#define D_DTS_PRVOUT(v)        ((v)<<5)	/* Previous Out Pipe */
+
+/* Time Slot defines */
+#define D_TS_LEN(v)	((v)<<24)	/* Number of bits in this time slot */
+#define D_TS_CYCLE(v)	((v)<<14)	/* Bit Count at start of TS */
+#define D_TS_DI		(1<<13)	/* Data Invert */
+#define D_TS_1CHANNEL	(0<<10)	/* Single Channel / Normal mode */
+#define D_TS_MONITOR	(2<<10)	/* Monitor pipe */
+#define D_TS_NONCONTIG	(3<<10)	/* Non contiguous mode */
+#define D_TS_ANCHOR	(7<<10)	/* Starting short pipes */
+#define D_TS_MON(v)    ((v)<<5)	/* Monitor Pipe */
+#define D_TS_NEXT(v)   ((v)<<0)	/* Pipe Nr: 0-15 long, 16-21 short */
+
+/* Concentration Highway Interface Modes */
+#define D_CHI_CHICM(v)	((v)<<16)	/* Clock mode */
+#define D_CHI_IR	(1<<15)	/* Immediate Interrupt Report */
+#define D_CHI_EN	(1<<14)	/* CHIL Interrupt enabled */
+#define D_CHI_OD	(1<<13)	/* Open Drain Enable */
+#define D_CHI_FE	(1<<12)	/* Sample CHIFS on Rising Frame Edge */
+#define D_CHI_FD	(1<<11)	/* Frame Drive */
+#define D_CHI_BPF(v)	((v)<<0)	/* Bits per Frame */
+
+/* NT: These are here for completeness */
+#define D_NT_FBIT	(1<<17)	/* Frame Bit */
+#define D_NT_NBF	(1<<16)	/* Number of bad frames to loose framing */
+#define D_NT_IRM_IMM	(1<<15)	/* Interrupt Report & Mask: Immediate */
+#define D_NT_IRM_EN	(1<<14)	/* Interrupt Report & Mask: Enable */
+#define D_NT_ISNT	(1<<13)	/* Configfure interface as NT */
+#define D_NT_FT		(1<<12)	/* Fixed Timing */
+#define D_NT_EZ		(1<<11)	/* Echo Channel is Zeros */
+#define D_NT_IFA	(1<<10)	/* Inhibit Final Activation */
+#define D_NT_ACT	(1<<9)	/* Activate Interface */
+#define D_NT_MFE	(1<<8)	/* Multiframe Enable */
+#define D_NT_RLB(v)	((v)<<5)	/* Remote Loopback */
+#define D_NT_LLB(v)	((v)<<2)	/* Local Loopback */
+#define D_NT_FACT	(1<<1)	/* Force Activation */
+#define D_NT_ABV	(1<<0)	/* Activate Bipolar Violation */
+
+/* Codec Setup */
+#define D_CDEC_CK(v)	((v)<<24)	/* Clock Select */
+#define D_CDEC_FED(v)	((v)<<12)	/* FSCOD Falling Edge Delay */
+#define D_CDEC_RED(v)	((v)<<0)	/* FSCOD Rising Edge Delay */
+
+/* Test */
+#define D_TEST_RAM(v)	((v)<<16)	/* RAM Pointer */
+#define D_TEST_SIZE(v)	((v)<<11)	/* */
+#define D_TEST_ROMONOFF	0x5	/* Toggle ROM opcode monitor on/off */
+#define D_TEST_PROC	0x6	/* MicroProcessor test */
+#define D_TEST_SER	0x7	/* Serial-Controller test */
+#define D_TEST_RAMREAD	0x8	/* Copy from Ram to system memory */
+#define D_TEST_RAMWRITE	0x9	/* Copy into Ram from system memory */
+#define D_TEST_RAMBIST	0xa	/* RAM Built-In Self Test */
+#define D_TEST_MCBIST	0xb	/* Microcontroller Built-In Self Test */
+#define D_TEST_DUMP	0xe	/* ROM Dump */
+
+/* CHI Data Mode */
+#define D_CDM_THI	(1<<8)	/* Transmit Data on CHIDR Pin */
+#define D_CDM_RHI	(1<<7)	/* Receive Data on CHIDX Pin */
+#define D_CDM_RCE	(1<<6)	/* Receive on Rising Edge of CHICK */
+#define D_CDM_XCE	(1<<2)	/* Transmit Data on Rising Edge of CHICK */
+#define D_CDM_XEN	(1<<1)	/* Transmit Highway Enable */
+#define D_CDM_REN	(1<<0)	/* Receive Highway Enable */
+
+/* The Interrupts */
+#define D_INTR_BRDY	1	/* Buffer Ready for processing */
+#define D_INTR_MINT	2	/* Marked Interrupt in RD/TD */
+#define D_INTR_IBEG	3	/* Flag to idle transition detected (HDLC) */
+#define D_INTR_IEND	4	/* Idle to flag transition detected (HDLC) */
+#define D_INTR_EOL	5	/* End of List */
+#define D_INTR_CMDI	6	/* Command has bean read */
+#define D_INTR_XCMP	8	/* Transmission of frame complete */
+#define D_INTR_SBRI	9	/* BRI status change info */
+#define D_INTR_FXDT	10	/* Fixed data change */
+#define D_INTR_CHIL	11	/* CHI lost frame sync (channel 36 only) */
+#define D_INTR_COLL	11	/* Unrecoverable D-Channel collision */
+#define D_INTR_DBYT	12	/* Dropped by frame slip */
+#define D_INTR_RBYT	13	/* Repeated by frame slip */
+#define D_INTR_LINT	14	/* Lost Interrupt */
+#define D_INTR_UNDR	15	/* DMA underrun */
+
+#define D_INTR_TE	32
+#define D_INTR_NT	34
+#define D_INTR_CHI	36
+#define D_INTR_CMD	38
+
+#define D_INTR_GETCHAN(v)	(((v)>>24) & 0x3f)
+#define D_INTR_GETCODE(v)	(((v)>>20) & 0xf)
+#define D_INTR_GETCMD(v)	(((v)>>16) & 0xf)
+#define D_INTR_GETVAL(v)	((v) & 0xffff)
+#define D_INTR_GETRVAL(v)	((v) & 0xfffff)
+
+#define D_P_0		0	/* TE receive anchor */
+#define D_P_1		1	/* TE transmit anchor */
+#define D_P_2		2	/* NT transmit anchor */
+#define D_P_3		3	/* NT receive anchor */
+#define D_P_4		4	/* CHI send data */
+#define D_P_5		5	/* CHI receive data */
+#define D_P_6		6	/* */
+#define D_P_7		7	/* */
+#define D_P_8		8	/* */
+#define D_P_9		9	/* */
+#define D_P_10		10	/* */
+#define D_P_11		11	/* */
+#define D_P_12		12	/* */
+#define D_P_13		13	/* */
+#define D_P_14		14	/* */
+#define D_P_15		15	/* */
+#define D_P_16		16	/* CHI anchor pipe */
+#define D_P_17		17	/* CHI send */
+#define D_P_18		18	/* CHI receive */
+#define D_P_19		19	/* CHI receive */
+#define D_P_20		20	/* CHI receive */
+#define D_P_21		21	/* */
+#define D_P_22		22	/* */
+#define D_P_23		23	/* */
+#define D_P_24		24	/* */
+#define D_P_25		25	/* */
+#define D_P_26		26	/* */
+#define D_P_27		27	/* */
+#define D_P_28		28	/* */
+#define D_P_29		29	/* */
+#define D_P_30		30	/* */
+#define D_P_31		31	/* */
+
+/* Transmit descriptor defines */
+#define DBRI_TD_F	(1<<31)	/* End of Frame */
+#define DBRI_TD_D	(1<<30)	/* Do not append CRC */
+#define DBRI_TD_CNT(v)	((v)<<16)	/* Number of valid bytes in the buffer */
+#define DBRI_TD_B	(1<<15)	/* Final interrupt */
+#define DBRI_TD_M	(1<<14)	/* Marker interrupt */
+#define DBRI_TD_I	(1<<13)	/* Transmit Idle Characters */
+#define DBRI_TD_FCNT(v)	(v)	/* Flag Count */
+#define DBRI_TD_UNR	(1<<3)	/* Underrun: transmitter is out of data */
+#define DBRI_TD_ABT	(1<<2)	/* Abort: frame aborted */
+#define DBRI_TD_TBC	(1<<0)	/* Transmit buffer Complete */
+#define DBRI_TD_STATUS(v)       ((v)&0xff)	/* Transmit status */
+			/* Maximum buffer size per TD: almost 8Kb */
+#define DBRI_TD_MAXCNT	((1 << 13) - 1)
+
+/* Receive descriptor defines */
+#define DBRI_RD_F	(1<<31)	/* End of Frame */
+#define DBRI_RD_C	(1<<30)	/* Completed buffer */
+#define DBRI_RD_B	(1<<15)	/* Final interrupt */
+#define DBRI_RD_M	(1<<14)	/* Marker interrupt */
+#define DBRI_RD_BCNT(v)	(v)	/* Buffer size */
+#define DBRI_RD_CRC	(1<<7)	/* 0: CRC is correct */
+#define DBRI_RD_BBC	(1<<6)	/* 1: Bad Byte received */
+#define DBRI_RD_ABT	(1<<5)	/* Abort: frame aborted */
+#define DBRI_RD_OVRN	(1<<3)	/* Overrun: data lost */
+#define DBRI_RD_STATUS(v)      ((v)&0xff)	/* Receive status */
+#define DBRI_RD_CNT(v) (((v)>>16)&0x1fff)	/* Valid bytes in the buffer */
+
+/* stream_info[] access */
+/* Translate the ALSA direction into the array index */
+#define DBRI_STREAMNO(substream)				\
+		(substream->stream == 				\
+		 SNDRV_PCM_STREAM_PLAYBACK? DBRI_PLAY: DBRI_REC)
+
+/* Return a pointer to dbri_streaminfo */
+#define DBRI_STREAM(dbri, substream)	&dbri->stream_info[DBRI_STREAMNO(substream)]
+
+static snd_dbri_t *dbri_list = NULL;	/* All DBRI devices */
+
+/*
+ * Short data pipes transmit LSB first. The CS4215 receives MSB first. Grrr.
+ * So we have to reverse the bits. Note: not all bit lengths are supported
+ */
+static __u32 reverse_bytes(__u32 b, int len)
+{
+	switch (len) {
+	case 32:
+		b = ((b & 0xffff0000) >> 16) | ((b & 0x0000ffff) << 16);
+	case 16:
+		b = ((b & 0xff00ff00) >> 8) | ((b & 0x00ff00ff) << 8);
+	case 8:
+		b = ((b & 0xf0f0f0f0) >> 4) | ((b & 0x0f0f0f0f) << 4);
+	case 4:
+		b = ((b & 0xcccccccc) >> 2) | ((b & 0x33333333) << 2);
+	case 2:
+		b = ((b & 0xaaaaaaaa) >> 1) | ((b & 0x55555555) << 1);
+	case 1:
+	case 0:
+		break;
+	default:
+		printk(KERN_ERR "DBRI reverse_bytes: unsupported length\n");
+	};
+
+	return b;
+}
+
+/*
+****************************************************************************
+************** DBRI initialization and command synchronization *************
+****************************************************************************
+
+Commands are sent to the DBRI by building a list of them in memory,
+then writing the address of the first list item to DBRI register 8.
+The list is terminated with a WAIT command, which can generate a
+CPU interrupt if required.
+
+Since the DBRI can run in parallel with the CPU, several means of
+synchronization present themselves.  The original scheme (Rudolf's)
+was to set a flag when we "cmdlock"ed the DBRI, clear the flag when
+an interrupt signaled completion, and wait on a wait_queue if a routine
+attempted to cmdlock while the flag was set.  The problems arose when
+we tried to cmdlock from inside an interrupt handler, which might
+cause scheduling in an interrupt (if we waited), etc, etc
+
+A more sophisticated scheme might involve a circular command buffer
+or an array of command buffers.  A routine could fill one with
+commands and link it onto a list.  When a interrupt signaled
+completion of the current command buffer, look on the list for
+the next one.
+
+I've decided to implement something much simpler - after each command,
+the CPU waits for the DBRI to finish the command by polling the P bit
+in DBRI register 0.  I've tried to implement this in such a way
+that might make implementing a more sophisticated scheme easier.
+
+Every time a routine wants to write commands to the DBRI, it must
+first call dbri_cmdlock() and get an initial pointer into dbri->dma->cmd
+in return.  After the commands have been writen, dbri_cmdsend() is
+called with the final pointer value.
+
+*/
+
+enum dbri_lock_t { NoGetLock, GetLock };
+
+static volatile s32 *dbri_cmdlock(snd_dbri_t * dbri, enum dbri_lock_t get)
+{
+#ifndef SMP
+	if ((get == GetLock) && spin_is_locked(&dbri->lock)) {
+		printk(KERN_ERR "DBRI: cmdlock called while in spinlock.");
+	}
+#endif
+
+	/*if (get == GetLock) spin_lock(&dbri->lock); */
+	return &dbri->dma->cmd[0];
+}
+
+static void dbri_process_interrupt_buffer(snd_dbri_t *);
+
+static void dbri_cmdsend(snd_dbri_t * dbri, volatile s32 * cmd)
+{
+	int MAXLOOPS = 1000000;
+	int maxloops = MAXLOOPS;
+	volatile s32 *ptr;
+
+	for (ptr = &dbri->dma->cmd[0]; ptr < cmd; ptr++) {
+		dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
+	}
+
+	if ((cmd - &dbri->dma->cmd[0]) >= DBRI_NO_CMDS - 1) {
+		printk("DBRI: Command buffer overflow! (bug in driver)\n");
+		/* Ignore the last part. */
+		cmd = &dbri->dma->cmd[DBRI_NO_CMDS - 3];
+	}
+
+	*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
+	*(cmd++) = DBRI_CMD(D_WAIT, 1, 0);
+	dbri->wait_seen = 0;
+	sbus_writel(dbri->dma_dvma, dbri->regs + REG8);
+	while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P))
+		barrier();
+	if (maxloops == 0) {
+		printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
+		dprintk(D_CMD, "DBRI: Chip never completed command buffer\n");
+	} else {
+		while ((--maxloops) > 0 && (!dbri->wait_seen))
+			dbri_process_interrupt_buffer(dbri);
+		if (maxloops == 0) {
+			printk(KERN_ERR "DBRI: Chip never acked WAIT\n");
+			dprintk(D_CMD, "DBRI: Chip never acked WAIT\n");
+		} else {
+			dprintk(D_CMD, "Chip completed command "
+				"buffer (%d)\n", MAXLOOPS - maxloops);
+		}
+	}
+
+	/*spin_unlock(&dbri->lock); */
+}
+
+/* Lock must be held when calling this */
+static void dbri_reset(snd_dbri_t * dbri)
+{
+	int i;
+
+	dprintk(D_GEN, "reset 0:%x 2:%x 8:%x 9:%x\n",
+		sbus_readl(dbri->regs + REG0),
+		sbus_readl(dbri->regs + REG2),
+		sbus_readl(dbri->regs + REG8), sbus_readl(dbri->regs + REG9));
+
+	sbus_writel(D_R, dbri->regs + REG0);	/* Soft Reset */
+	for (i = 0; (sbus_readl(dbri->regs + REG0) & D_R) && i < 64; i++)
+		udelay(10);
+}
+
+/* Lock must not be held before calling this */
+static void dbri_initialize(snd_dbri_t * dbri)
+{
+	volatile s32 *cmd;
+	u32 dma_addr, tmp;
+	unsigned long flags;
+	int n;
+
+	spin_lock_irqsave(&dbri->lock, flags);
+
+	dbri_reset(dbri);
+
+	cmd = dbri_cmdlock(dbri, NoGetLock);
+	dprintk(D_GEN, "init: cmd: %p, int: %p\n",
+		&dbri->dma->cmd[0], &dbri->dma->intr[0]);
+
+	/*
+	 * Initialize the interrupt ringbuffer.
+	 */
+	for (n = 0; n < DBRI_NO_INTS - 1; n++) {
+		dma_addr = dbri->dma_dvma;
+		dma_addr += dbri_dma_off(intr, ((n + 1) & DBRI_INT_BLK));
+		dbri->dma->intr[n * DBRI_INT_BLK] = dma_addr;
+	}
+	dma_addr = dbri->dma_dvma + dbri_dma_off(intr, 0);
+	dbri->dma->intr[n * DBRI_INT_BLK] = dma_addr;
+	dbri->dbri_irqp = 1;
+
+	/* Initialize pipes */
+	for (n = 0; n < DBRI_NO_PIPES; n++)
+		dbri->pipes[n].desc = dbri->pipes[n].first_desc = -1;
+
+	/* We should query the openprom to see what burst sizes this
+	 * SBus supports.  For now, just disable all SBus bursts */
+	tmp = sbus_readl(dbri->regs + REG0);
+	tmp &= ~(D_G | D_S | D_E);
+	sbus_writel(tmp, dbri->regs + REG0);
+
+	/*
+	 * Set up the interrupt queue
+	 */
+	dma_addr = dbri->dma_dvma + dbri_dma_off(intr, 0);
+	*(cmd++) = DBRI_CMD(D_IIQ, 0, 0);
+	*(cmd++) = dma_addr;
+
+	dbri_cmdsend(dbri, cmd);
+	spin_unlock_irqrestore(&dbri->lock, flags);
+}
+
+/*
+****************************************************************************
+************************** DBRI data pipe management ***********************
+****************************************************************************
+
+While DBRI control functions use the command and interrupt buffers, the
+main data path takes the form of data pipes, which can be short (command
+and interrupt driven), or long (attached to DMA buffers).  These functions
+provide a rudimentary means of setting up and managing the DBRI's pipes,
+but the calling functions have to make sure they respect the pipes' linked
+list ordering, among other things.  The transmit and receive functions
+here interface closely with the transmit and receive interrupt code.
+
+*/
+static int pipe_active(snd_dbri_t * dbri, int pipe)
+{
+	return ((pipe >= 0) && (dbri->pipes[pipe].desc != -1));
+}
+
+/* reset_pipe(dbri, pipe)
+ *
+ * Called on an in-use pipe to clear anything being transmitted or received
+ * Lock must be held before calling this.
+ */
+static void reset_pipe(snd_dbri_t * dbri, int pipe)
+{
+	int sdp;
+	int desc;
+	volatile int *cmd;
+
+	if (pipe < 0 || pipe > 31) {
+		printk("DBRI: reset_pipe called with illegal pipe number\n");
+		return;
+	}
+
+	sdp = dbri->pipes[pipe].sdp;
+	if (sdp == 0) {
+		printk("DBRI: reset_pipe called on uninitialized pipe\n");
+		return;
+	}
+
+	cmd = dbri_cmdlock(dbri, NoGetLock);
+	*(cmd++) = DBRI_CMD(D_SDP, 0, sdp | D_SDP_C | D_SDP_P);
+	*(cmd++) = 0;
+	dbri_cmdsend(dbri, cmd);
+
+	desc = dbri->pipes[pipe].first_desc;
+	while (desc != -1) {
+		dbri->descs[desc].inuse = 0;
+		desc = dbri->descs[desc].next;
+	}
+
+	dbri->pipes[pipe].desc = -1;
+	dbri->pipes[pipe].first_desc = -1;
+}
+
+/* FIXME: direction as an argument? */
+static void setup_pipe(snd_dbri_t * dbri, int pipe, int sdp)
+{
+	if (pipe < 0 || pipe > 31) {
+		printk("DBRI: setup_pipe called with illegal pipe number\n");
+		return;
+	}
+
+	if ((sdp & 0xf800) != sdp) {
+		printk("DBRI: setup_pipe called with strange SDP value\n");
+		/* sdp &= 0xf800; */
+	}
+
+	/* If this is a fixed receive pipe, arrange for an interrupt
+	 * every time its data changes
+	 */
+	if (D_SDP_MODE(sdp) == D_SDP_FIXED && !(sdp & D_SDP_TO_SER))
+		sdp |= D_SDP_CHANGE;
+
+	sdp |= D_PIPE(pipe);
+	dbri->pipes[pipe].sdp = sdp;
+	dbri->pipes[pipe].desc = -1;
+	dbri->pipes[pipe].first_desc = -1;
+	if (sdp & D_SDP_TO_SER)
+		dbri->pipes[pipe].direction = PIPEoutput;
+	else
+		dbri->pipes[pipe].direction = PIPEinput;
+
+	reset_pipe(dbri, pipe);
+}
+
+/* FIXME: direction not needed */
+static void link_time_slot(snd_dbri_t * dbri, int pipe,
+			   enum in_or_out direction, int basepipe,
+			   int length, int cycle)
+{
+	volatile s32 *cmd;
+	int val;
+	int prevpipe;
+	int nextpipe;
+
+	if (pipe < 0 || pipe > 31 || basepipe < 0 || basepipe > 31) {
+		printk
+		    ("DBRI: link_time_slot called with illegal pipe number\n");
+		return;
+	}
+
+	if (dbri->pipes[pipe].sdp == 0 || dbri->pipes[basepipe].sdp == 0) {
+		printk("DBRI: link_time_slot called on uninitialized pipe\n");
+		return;
+	}
+
+	/* Deal with CHI special case:
+	 * "If transmission on edges 0 or 1 is desired, then cycle n
+	 *  (where n = # of bit times per frame...) must be used."
+	 *                  - DBRI data sheet, page 11
+	 */
+	if (basepipe == 16 && direction == PIPEoutput && cycle == 0)
+		cycle = dbri->chi_bpf;
+
+	if (basepipe == pipe) {
+		prevpipe = pipe;
+		nextpipe = pipe;
+	} else {
+		/* We're not initializing a new linked list (basepipe != pipe),
+		 * so run through the linked list and find where this pipe
+		 * should be sloted in, based on its cycle.  CHI confuses
+		 * things a bit, since it has a single anchor for both its
+		 * transmit and receive lists.
+		 */
+		if (basepipe == 16) {
+			if (direction == PIPEinput) {
+				prevpipe = dbri->chi_in_pipe;
+			} else {
+				prevpipe = dbri->chi_out_pipe;
+			}
+		} else {
+			prevpipe = basepipe;
+		}
+
+		nextpipe = dbri->pipes[prevpipe].nextpipe;
+
+		while (dbri->pipes[nextpipe].cycle < cycle
+		       && dbri->pipes[nextpipe].nextpipe != basepipe) {
+			prevpipe = nextpipe;
+			nextpipe = dbri->pipes[nextpipe].nextpipe;
+		}
+	}
+
+	if (prevpipe == 16) {
+		if (direction == PIPEinput) {
+			dbri->chi_in_pipe = pipe;
+		} else {
+			dbri->chi_out_pipe = pipe;
+		}
+	} else {
+		dbri->pipes[prevpipe].nextpipe = pipe;
+	}
+
+	dbri->pipes[pipe].nextpipe = nextpipe;
+	dbri->pipes[pipe].cycle = cycle;
+	dbri->pipes[pipe].length = length;
+
+	cmd = dbri_cmdlock(dbri, NoGetLock);
+
+	if (direction == PIPEinput) {
+		val = D_DTS_VI | D_DTS_INS | D_DTS_PRVIN(prevpipe) | pipe;
+		*(cmd++) = DBRI_CMD(D_DTS, 0, val);
+		*(cmd++) =
+		    D_TS_LEN(length) | D_TS_CYCLE(cycle) | D_TS_NEXT(nextpipe);
+		*(cmd++) = 0;
+	} else {
+		val = D_DTS_VO | D_DTS_INS | D_DTS_PRVOUT(prevpipe) | pipe;
+		*(cmd++) = DBRI_CMD(D_DTS, 0, val);
+		*(cmd++) = 0;
+		*(cmd++) =
+		    D_TS_LEN(length) | D_TS_CYCLE(cycle) | D_TS_NEXT(nextpipe);
+	}
+
+	dbri_cmdsend(dbri, cmd);
+}
+
+static void unlink_time_slot(snd_dbri_t * dbri, int pipe,
+			     enum in_or_out direction, int prevpipe,
+			     int nextpipe)
+{
+	volatile s32 *cmd;
+	int val;
+
+	if (pipe < 0 || pipe > 31 || prevpipe < 0 || prevpipe > 31) {
+		printk
+		    ("DBRI: unlink_time_slot called with illegal pipe number\n");
+		return;
+	}
+
+	cmd = dbri_cmdlock(dbri, NoGetLock);
+
+	if (direction == PIPEinput) {
+		val = D_DTS_VI | D_DTS_DEL | D_DTS_PRVIN(prevpipe) | pipe;
+		*(cmd++) = DBRI_CMD(D_DTS, 0, val);
+		*(cmd++) = D_TS_NEXT(nextpipe);
+		*(cmd++) = 0;
+	} else {
+		val = D_DTS_VO | D_DTS_DEL | D_DTS_PRVOUT(prevpipe) | pipe;
+		*(cmd++) = DBRI_CMD(D_DTS, 0, val);
+		*(cmd++) = 0;
+		*(cmd++) = D_TS_NEXT(nextpipe);
+	}
+
+	dbri_cmdsend(dbri, cmd);
+}
+
+/* xmit_fixed() / recv_fixed()
+ *
+ * Transmit/receive data on a "fixed" pipe - i.e, one whose contents are not
+ * expected to change much, and which we don't need to buffer.
+ * The DBRI only interrupts us when the data changes (receive pipes),
+ * or only changes the data when this function is called (transmit pipes).
+ * Only short pipes (numbers 16-31) can be used in fixed data mode.
+ *
+ * These function operate on a 32-bit field, no matter how large
+ * the actual time slot is.  The interrupt handler takes care of bit
+ * ordering and alignment.  An 8-bit time slot will always end up
+ * in the low-order 8 bits, filled either MSB-first or LSB-first,
+ * depending on the settings passed to setup_pipe()
+ */
+static void xmit_fixed(snd_dbri_t * dbri, int pipe, unsigned int data)
+{
+	volatile s32 *cmd;
+
+	if (pipe < 16 || pipe > 31) {
+		printk("DBRI: xmit_fixed: Illegal pipe number\n");
+		return;
+	}
+
+	if (D_SDP_MODE(dbri->pipes[pipe].sdp) == 0) {
+		printk("DBRI: xmit_fixed: Uninitialized pipe %d\n", pipe);
+		return;
+	}
+
+	if (D_SDP_MODE(dbri->pipes[pipe].sdp) != D_SDP_FIXED) {
+		printk("DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe);
+		return;
+	}
+
+	if (!(dbri->pipes[pipe].sdp & D_SDP_TO_SER)) {
+		printk("DBRI: xmit_fixed: Called on receive pipe %d\n", pipe);
+		return;
+	}
+
+	/* DBRI short pipes always transmit LSB first */
+
+	if (dbri->pipes[pipe].sdp & D_SDP_MSB)
+		data = reverse_bytes(data, dbri->pipes[pipe].length);
+
+	cmd = dbri_cmdlock(dbri, GetLock);
+
+	*(cmd++) = DBRI_CMD(D_SSP, 0, pipe);
+	*(cmd++) = data;
+
+	dbri_cmdsend(dbri, cmd);
+}
+
+static void recv_fixed(snd_dbri_t * dbri, int pipe, volatile __u32 * ptr)
+{
+	if (pipe < 16 || pipe > 31) {
+		printk("DBRI: recv_fixed called with illegal pipe number\n");
+		return;
+	}
+
+	if (D_SDP_MODE(dbri->pipes[pipe].sdp) != D_SDP_FIXED) {
+		printk("DBRI: recv_fixed called on non-fixed pipe %d\n", pipe);
+		return;
+	}
+
+	if (dbri->pipes[pipe].sdp & D_SDP_TO_SER) {
+		printk("DBRI: recv_fixed called on transmit pipe %d\n", pipe);
+		return;
+	}
+
+	dbri->pipes[pipe].recv_fixed_ptr = ptr;
+}
+
+/* setup_descs()
+ *
+ * Setup transmit/receive data on a "long" pipe - i.e, one associated
+ * with a DMA buffer.
+ *
+ * Only pipe numbers 0-15 can be used in this mode.
+ *
+ * This function takes a stream number pointing to a data buffer,
+ * and work by building chains of descriptors which identify the
+ * data buffers.  Buffers too large for a single descriptor will
+ * be spread across multiple descriptors.
+ */
+static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
+{
+	dbri_streaminfo_t *info = &dbri->stream_info[streamno];
+	__u32 dvma_buffer;
+	int desc = 0;
+	int len;
+	int first_desc = -1;
+	int last_desc = -1;
+
+	if (info->pipe < 0 || info->pipe > 15) {
+		printk("DBRI: setup_descs: Illegal pipe number\n");
+		return -2;
+	}
+
+	if (dbri->pipes[info->pipe].sdp == 0) {
+		printk("DBRI: setup_descs: Uninitialized pipe %d\n",
+		       info->pipe);
+		return -2;
+	}
+
+	dvma_buffer = info->dvma_buffer;
+	len = info->size;
+
+	if (streamno == DBRI_PLAY) {
+		if (!(dbri->pipes[info->pipe].sdp & D_SDP_TO_SER)) {
+			printk("DBRI: setup_descs: Called on receive pipe %d\n",
+			       info->pipe);
+			return -2;
+		}
+	} else {
+		if (dbri->pipes[info->pipe].sdp & D_SDP_TO_SER) {
+			printk
+			    ("DBRI: setup_descs: Called on transmit pipe %d\n",
+			     info->pipe);
+			return -2;
+		}
+		/* Should be able to queue multiple buffers to receive on a pipe */
+		if (pipe_active(dbri, info->pipe)) {
+			printk("DBRI: recv_on_pipe: Called on active pipe %d\n",
+			       info->pipe);
+			return -2;
+		}
+
+		/* Make sure buffer size is multiple of four */
+		len &= ~3;
+	}
+
+	while (len > 0) {
+		int mylen;
+
+		for (; desc < DBRI_NO_DESCS; desc++) {
+			if (!dbri->descs[desc].inuse)
+				break;
+		}
+		if (desc == DBRI_NO_DESCS) {
+			printk("DBRI: setup_descs: No descriptors\n");
+			return -1;
+		}
+
+		if (len > DBRI_TD_MAXCNT) {
+			mylen = DBRI_TD_MAXCNT;	/* 8KB - 1 */
+		} else {
+			mylen = len;
+		}
+		if (mylen > period) {
+			mylen = period;
+		}
+
+		dbri->descs[desc].inuse = 1;
+		dbri->descs[desc].next = -1;
+		dbri->dma->desc[desc].ba = dvma_buffer;
+		dbri->dma->desc[desc].nda = 0;
+
+		if (streamno == DBRI_PLAY) {
+			dbri->descs[desc].len = mylen;
+			dbri->dma->desc[desc].word1 = DBRI_TD_CNT(mylen);
+			dbri->dma->desc[desc].word4 = 0;
+			if (first_desc != -1)
+				dbri->dma->desc[desc].word1 |= DBRI_TD_M;
+		} else {
+			dbri->descs[desc].len = 0;
+			dbri->dma->desc[desc].word1 = 0;
+			dbri->dma->desc[desc].word4 =
+			    DBRI_RD_B | DBRI_RD_BCNT(mylen);
+		}
+
+		if (first_desc == -1) {
+			first_desc = desc;
+		} else {
+			dbri->descs[last_desc].next = desc;
+			dbri->dma->desc[last_desc].nda =
+			    dbri->dma_dvma + dbri_dma_off(desc, desc);
+		}
+
+		last_desc = desc;
+		dvma_buffer += mylen;
+		len -= mylen;
+	}
+
+	if (first_desc == -1 || last_desc == -1) {
+		printk("DBRI: setup_descs: Not enough descriptors available\n");
+		return -1;
+	}
+
+	dbri->dma->desc[last_desc].word1 &= ~DBRI_TD_M;
+	if (streamno == DBRI_PLAY) {
+		dbri->dma->desc[last_desc].word1 |=
+		    DBRI_TD_I | DBRI_TD_F | DBRI_TD_B;
+	}
+	dbri->pipes[info->pipe].first_desc = first_desc;
+	dbri->pipes[info->pipe].desc = first_desc;
+
+	for (desc = first_desc; desc != -1; desc = dbri->descs[desc].next) {
+		dprintk(D_DESC, "DESC %d: %08x %08x %08x %08x\n",
+			desc,
+			dbri->dma->desc[desc].word1,
+			dbri->dma->desc[desc].ba,
+			dbri->dma->desc[desc].nda, dbri->dma->desc[desc].word4);
+	}
+	return 0;
+}
+
+/*
+****************************************************************************
+************************** DBRI - CHI interface ****************************
+****************************************************************************
+
+The CHI is a four-wire (clock, frame sync, data in, data out) time-division
+multiplexed serial interface which the DBRI can operate in either master
+(give clock/frame sync) or slave (take clock/frame sync) mode.
+
+*/
+
+enum master_or_slave { CHImaster, CHIslave };
+
+static void reset_chi(snd_dbri_t * dbri, enum master_or_slave master_or_slave,
+		      int bits_per_frame)
+{
+	volatile s32 *cmd;
+	int val;
+	static int chi_initialized = 0;	/* FIXME: mutex? */
+
+	if (!chi_initialized) {
+
+		cmd = dbri_cmdlock(dbri, GetLock);
+
+		/* Set CHI Anchor: Pipe 16 */
+
+		val = D_DTS_VI | D_DTS_INS | D_DTS_PRVIN(16) | D_PIPE(16);
+		*(cmd++) = DBRI_CMD(D_DTS, 0, val);
+		*(cmd++) = D_TS_ANCHOR | D_TS_NEXT(16);
+		*(cmd++) = 0;
+
+		val = D_DTS_VO | D_DTS_INS | D_DTS_PRVOUT(16) | D_PIPE(16);
+		*(cmd++) = DBRI_CMD(D_DTS, 0, val);
+		*(cmd++) = 0;
+		*(cmd++) = D_TS_ANCHOR | D_TS_NEXT(16);
+
+		dbri->pipes[16].sdp = 1;
+		dbri->pipes[16].nextpipe = 16;
+		dbri->chi_in_pipe = 16;
+		dbri->chi_out_pipe = 16;
+
+#if 0
+		chi_initialized++;
+#endif
+	} else {
+		int pipe;
+
+		for (pipe = dbri->chi_in_pipe;
+		     pipe != 16; pipe = dbri->pipes[pipe].nextpipe) {
+			unlink_time_slot(dbri, pipe, PIPEinput,
+					 16, dbri->pipes[pipe].nextpipe);
+		}
+		for (pipe = dbri->chi_out_pipe;
+		     pipe != 16; pipe = dbri->pipes[pipe].nextpipe) {
+			unlink_time_slot(dbri, pipe, PIPEoutput,
+					 16, dbri->pipes[pipe].nextpipe);
+		}
+
+		dbri->chi_in_pipe = 16;
+		dbri->chi_out_pipe = 16;
+
+		cmd = dbri_cmdlock(dbri, GetLock);
+	}
+
+	if (master_or_slave == CHIslave) {
+		/* Setup DBRI for CHI Slave - receive clock, frame sync (FS)
+		 *
+		 * CHICM  = 0 (slave mode, 8 kHz frame rate)
+		 * IR     = give immediate CHI status interrupt
+		 * EN     = give CHI status interrupt upon change
+		 */
+		*(cmd++) = DBRI_CMD(D_CHI, 0, D_CHI_CHICM(0));
+	} else {
+		/* Setup DBRI for CHI Master - generate clock, FS
+		 *
+		 * BPF                          =  bits per 8 kHz frame
+		 * 12.288 MHz / CHICM_divisor   = clock rate
+		 * FD  =  1 - drive CHIFS on rising edge of CHICK
+		 */
+		int clockrate = bits_per_frame * 8;
+		int divisor = 12288 / clockrate;
+
+		if (divisor > 255 || divisor * clockrate != 12288)
+			printk("DBRI: illegal bits_per_frame in setup_chi\n");
+
+		*(cmd++) = DBRI_CMD(D_CHI, 0, D_CHI_CHICM(divisor) | D_CHI_FD
+				    | D_CHI_BPF(bits_per_frame));
+	}
+
+	dbri->chi_bpf = bits_per_frame;
+
+	/* CHI Data Mode
+	 *
+	 * RCE   =  0 - receive on falling edge of CHICK
+	 * XCE   =  1 - transmit on rising edge of CHICK
+	 * XEN   =  1 - enable transmitter
+	 * REN   =  1 - enable receiver
+	 */
+
+	*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
+	*(cmd++) = DBRI_CMD(D_CDM, 0, D_CDM_XCE | D_CDM_XEN | D_CDM_REN);
+
+	dbri_cmdsend(dbri, cmd);
+}
+
+/*
+****************************************************************************
+*********************** CS4215 audio codec management **********************
+****************************************************************************
+
+In the standard SPARC audio configuration, the CS4215 codec is attached
+to the DBRI via the CHI interface and few of the DBRI's PIO pins.
+
+*/
+static void cs4215_setup_pipes(snd_dbri_t * dbri)
+{
+	/*
+	 * Data mode:
+	 * Pipe  4: Send timeslots 1-4 (audio data)
+	 * Pipe 20: Send timeslots 5-8 (part of ctrl data)
+	 * Pipe  6: Receive timeslots 1-4 (audio data)
+	 * Pipe 21: Receive timeslots 6-7. We can only receive 20 bits via
+	 *          interrupt, and the rest of the data (slot 5 and 8) is
+	 *          not relevant for us (only for doublechecking).
+	 *
+	 * Control mode:
+	 * Pipe 17: Send timeslots 1-4 (slots 5-8 are readonly)
+	 * Pipe 18: Receive timeslot 1 (clb).
+	 * Pipe 19: Receive timeslot 7 (version). 
+	 */
+
+	setup_pipe(dbri, 4, D_SDP_MEM | D_SDP_TO_SER | D_SDP_MSB);
+	setup_pipe(dbri, 20, D_SDP_FIXED | D_SDP_TO_SER | D_SDP_MSB);
+	setup_pipe(dbri, 6, D_SDP_MEM | D_SDP_FROM_SER | D_SDP_MSB);
+	setup_pipe(dbri, 21, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
+
+	setup_pipe(dbri, 17, D_SDP_FIXED | D_SDP_TO_SER | D_SDP_MSB);
+	setup_pipe(dbri, 18, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
+	setup_pipe(dbri, 19, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
+}
+
+static int cs4215_init_data(struct cs4215 *mm)
+{
+	/*
+	 * No action, memory resetting only.
+	 *
+	 * Data Time Slot 5-8
+	 * Speaker,Line and Headphone enable. Gain set to the half.
+	 * Input is mike.
+	 */
+	mm->data[0] = CS4215_LO(0x20) | CS4215_HE | CS4215_LE;
+	mm->data[1] = CS4215_RO(0x20) | CS4215_SE;
+	mm->data[2] = CS4215_LG(0x8) | CS4215_IS | CS4215_PIO0 | CS4215_PIO1;
+	mm->data[3] = CS4215_RG(0x8) | CS4215_MA(0xf);
+
+	/*
+	 * Control Time Slot 1-4
+	 * 0: Default I/O voltage scale
+	 * 1: 8 bit ulaw, 8kHz, mono, high pass filter disabled
+	 * 2: Serial enable, CHI master, 128 bits per frame, clock 1
+	 * 3: Tests disabled
+	 */
+	mm->ctrl[0] = CS4215_RSRVD_1 | CS4215_MLB;
+	mm->ctrl[1] = CS4215_DFR_ULAW | CS4215_FREQ[0].csval;
+	mm->ctrl[2] = CS4215_XCLK | CS4215_BSEL_128 | CS4215_FREQ[0].xtal;
+	mm->ctrl[3] = 0;
+
+	mm->status = 0;
+	mm->version = 0xff;
+	mm->precision = 8;	/* For ULAW */
+	mm->channels = 2;
+
+	return 0;
+}
+
+static void cs4215_setdata(snd_dbri_t * dbri, int muted)
+{
+	if (muted) {
+		dbri->mm.data[0] |= 63;
+		dbri->mm.data[1] |= 63;
+		dbri->mm.data[2] &= ~15;
+		dbri->mm.data[3] &= ~15;
+	} else {
+		/* Start by setting the playback attenuation. */
+		dbri_streaminfo_t *info = &dbri->stream_info[DBRI_PLAY];
+		int left_gain = info->left_gain % 64;
+		int right_gain = info->right_gain % 64;
+
+		if (info->balance < DBRI_MID_BALANCE) {
+			right_gain *= info->balance;
+			right_gain /= DBRI_MID_BALANCE;
+		} else {
+			left_gain *= DBRI_RIGHT_BALANCE - info->balance;
+			left_gain /= DBRI_MID_BALANCE;
+		}
+
+		dbri->mm.data[0] &= ~0x3f;	/* Reset the volume bits */
+		dbri->mm.data[1] &= ~0x3f;
+		dbri->mm.data[0] |= (DBRI_MAX_VOLUME - left_gain);
+		dbri->mm.data[1] |= (DBRI_MAX_VOLUME - right_gain);
+
+		/* Now set the recording gain. */
+		info = &dbri->stream_info[DBRI_REC];
+		left_gain = info->left_gain % 16;
+		right_gain = info->right_gain % 16;
+		dbri->mm.data[2] |= CS4215_LG(left_gain);
+		dbri->mm.data[3] |= CS4215_RG(right_gain);
+	}
+
+	xmit_fixed(dbri, 20, *(int *)dbri->mm.data);
+}
+
+/*
+ * Set the CS4215 to data mode.
+ */
+static void cs4215_open(snd_dbri_t * dbri)
+{
+	int data_width;
+	u32 tmp;
+
+	dprintk(D_MM, "cs4215_open: %d channels, %d bits\n",
+		dbri->mm.channels, dbri->mm.precision);
+
+	/* Temporarily mute outputs, and wait 1/8000 sec (125 us)
+	 * to make sure this takes.  This avoids clicking noises.
+	 */
+
+	cs4215_setdata(dbri, 1);
+	udelay(125);
+
+	/*
+	 * Data mode:
+	 * Pipe  4: Send timeslots 1-4 (audio data)
+	 * Pipe 20: Send timeslots 5-8 (part of ctrl data)
+	 * Pipe  6: Receive timeslots 1-4 (audio data)
+	 * Pipe 21: Receive timeslots 6-7. We can only receive 20 bits via
+	 *          interrupt, and the rest of the data (slot 5 and 8) is
+	 *          not relevant for us (only for doublechecking).
+	 *
+	 * Just like in control mode, the time slots are all offset by eight
+	 * bits.  The CS4215, it seems, observes TSIN (the delayed signal)
+	 * even if it's the CHI master.  Don't ask me...
+	 */
+	tmp = sbus_readl(dbri->regs + REG0);
+	tmp &= ~(D_C);		/* Disable CHI */
+	sbus_writel(tmp, dbri->regs + REG0);
+
+	/* Switch CS4215 to data mode - set PIO3 to 1 */
+	sbus_writel(D_ENPIO | D_PIO1 | D_PIO3 |
+		    (dbri->mm.onboard ? D_PIO0 : D_PIO2), dbri->regs + REG2);
+
+	reset_chi(dbri, CHIslave, 128);
+
+	/* Note: this next doesn't work for 8-bit stereo, because the two
+	 * channels would be on timeslots 1 and 3, with 2 and 4 idle.
+	 * (See CS4215 datasheet Fig 15)
+	 *
+	 * DBRI non-contiguous mode would be required to make this work.
+	 */
+	data_width = dbri->mm.channels * dbri->mm.precision;
+
+	link_time_slot(dbri, 20, PIPEoutput, 16, 32, dbri->mm.offset + 32);
+	link_time_slot(dbri, 4, PIPEoutput, 16, data_width, dbri->mm.offset);
+	link_time_slot(dbri, 6, PIPEinput, 16, data_width, dbri->mm.offset);
+	link_time_slot(dbri, 21, PIPEinput, 16, 16, dbri->mm.offset + 40);
+
+	/* FIXME: enable CHI after _setdata? */
+	tmp = sbus_readl(dbri->regs + REG0);
+	tmp |= D_C;		/* Enable CHI */
+	sbus_writel(tmp, dbri->regs + REG0);
+
+	cs4215_setdata(dbri, 0);
+}
+
+/*
+ * Send the control information (i.e. audio format)
+ */
+static int cs4215_setctrl(snd_dbri_t * dbri)
+{
+	int i, val;
+	u32 tmp;
+
+	/* FIXME - let the CPU do something useful during these delays */
+
+	/* Temporarily mute outputs, and wait 1/8000 sec (125 us)
+	 * to make sure this takes.  This avoids clicking noises.
+	 */
+
+	cs4215_setdata(dbri, 1);
+	udelay(125);
+
+	/*
+	 * Enable Control mode: Set DBRI's PIO3 (4215's D/~C) to 0, then wait
+	 * 12 cycles <= 12/(5512.5*64) sec = 34.01 usec
+	 */
+	val = D_ENPIO | D_PIO1 | (dbri->mm.onboard ? D_PIO0 : D_PIO2);
+	sbus_writel(val, dbri->regs + REG2);
+	dprintk(D_MM, "cs4215_setctrl: reg2=0x%x\n", val);
+	udelay(34);
+
+	/* In Control mode, the CS4215 is a slave device, so the DBRI must
+	 * operate as CHI master, supplying clocking and frame synchronization.
+	 *
+	 * In Data mode, however, the CS4215 must be CHI master to insure
+	 * that its data stream is synchronous with its codec.
+	 *
+	 * The upshot of all this?  We start by putting the DBRI into master
+	 * mode, program the CS4215 in Control mode, then switch the CS4215
+	 * into Data mode and put the DBRI into slave mode.  Various timing
+	 * requirements must be observed along the way.
+	 *
+	 * Oh, and one more thing, on a SPARCStation 20 (and maybe
+	 * others?), the addressing of the CS4215's time slots is
+	 * offset by eight bits, so we add eight to all the "cycle"
+	 * values in the Define Time Slot (DTS) commands.  This is
+	 * done in hardware by a TI 248 that delays the DBRI->4215
+	 * frame sync signal by eight clock cycles.  Anybody know why?
+	 */
+	tmp = sbus_readl(dbri->regs + REG0);
+	tmp &= ~D_C;		/* Disable CHI */
+	sbus_writel(tmp, dbri->regs + REG0);
+
+	reset_chi(dbri, CHImaster, 128);
+
+	/*
+	 * Control mode:
+	 * Pipe 17: Send timeslots 1-4 (slots 5-8 are readonly)
+	 * Pipe 18: Receive timeslot 1 (clb).
+	 * Pipe 19: Receive timeslot 7 (version). 
+	 */
+
+	link_time_slot(dbri, 17, PIPEoutput, 16, 32, dbri->mm.offset);
+	link_time_slot(dbri, 18, PIPEinput, 16, 8, dbri->mm.offset);
+	link_time_slot(dbri, 19, PIPEinput, 16, 8, dbri->mm.offset + 48);
+
+	/* Wait for the chip to echo back CLB (Control Latch Bit) as zero */
+	dbri->mm.ctrl[0] &= ~CS4215_CLB;
+	xmit_fixed(dbri, 17, *(int *)dbri->mm.ctrl);
+
+	tmp = sbus_readl(dbri->regs + REG0);
+	tmp |= D_C;		/* Enable CHI */
+	sbus_writel(tmp, dbri->regs + REG0);
+
+	for (i = 64; ((dbri->mm.status & 0xe4) != 0x20); --i) {
+		udelay(125);
+	}
+	if (i == 0) {
+		dprintk(D_MM, "CS4215 didn't respond to CLB (0x%02x)\n",
+			dbri->mm.status);
+		return -1;
+	}
+
+	/* Disable changes to our copy of the version number, as we are about
+	 * to leave control mode.
+	 */
+	recv_fixed(dbri, 19, NULL);
+
+	/* Terminate CS4215 control mode - data sheet says
+	 * "Set CLB=1 and send two more frames of valid control info"
+	 */
+	dbri->mm.ctrl[0] |= CS4215_CLB;
+	xmit_fixed(dbri, 17, *(int *)dbri->mm.ctrl);
+
+	/* Two frames of control info @ 8kHz frame rate = 250 us delay */
+	udelay(250);
+
+	cs4215_setdata(dbri, 0);
+
+	return 0;
+}
+
+/*
+ * Setup the codec with the sampling rate, audio format and number of
+ * channels.
+ * As part of the process we resend the settings for the data
+ * timeslots as well.
+ */
+static int cs4215_prepare(snd_dbri_t * dbri, unsigned int rate,
+			  snd_pcm_format_t format, unsigned int channels)
+{
+	int freq_idx;
+	int ret = 0;
+
+	/* Lookup index for this rate */
+	for (freq_idx = 0; CS4215_FREQ[freq_idx].freq != 0; freq_idx++) {
+		if (CS4215_FREQ[freq_idx].freq == rate)
+			break;
+	}
+	if (CS4215_FREQ[freq_idx].freq != rate) {
+		printk(KERN_WARNING "DBRI: Unsupported rate %d Hz\n", rate);
+		return -1;
+	}
+
+	switch (format) {
+	case SNDRV_PCM_FORMAT_MU_LAW:
+		dbri->mm.ctrl[1] = CS4215_DFR_ULAW;
+		dbri->mm.precision = 8;
+		break;
+	case SNDRV_PCM_FORMAT_A_LAW:
+		dbri->mm.ctrl[1] = CS4215_DFR_ALAW;
+		dbri->mm.precision = 8;
+		break;
+	case SNDRV_PCM_FORMAT_U8:
+		dbri->mm.ctrl[1] = CS4215_DFR_LINEAR8;
+		dbri->mm.precision = 8;
+		break;
+	case SNDRV_PCM_FORMAT_S16_BE:
+		dbri->mm.ctrl[1] = CS4215_DFR_LINEAR16;
+		dbri->mm.precision = 16;
+		break;
+	default:
+		printk(KERN_WARNING "DBRI: Unsupported format %d\n", format);
+		return -1;
+	}
+
+	/* Add rate parameters */
+	dbri->mm.ctrl[1] |= CS4215_FREQ[freq_idx].csval;
+	dbri->mm.ctrl[2] = CS4215_XCLK |
+	    CS4215_BSEL_128 | CS4215_FREQ[freq_idx].xtal;
+
+	dbri->mm.channels = channels;
+	/* Stereo bit: 8 bit stereo not working yet. */
+	if ((channels > 1) && (dbri->mm.precision == 16))
+		dbri->mm.ctrl[1] |= CS4215_DFR_STEREO;
+
+	ret = cs4215_setctrl(dbri);
+	if (ret == 0)
+		cs4215_open(dbri);	/* set codec to data mode */
+
+	return ret;
+}
+
+/*
+ *
+ */
+static int cs4215_init(snd_dbri_t * dbri)
+{
+	u32 reg2 = sbus_readl(dbri->regs + REG2);
+	dprintk(D_MM, "cs4215_init: reg2=0x%x\n", reg2);
+
+	/* Look for the cs4215 chips */
+	if (reg2 & D_PIO2) {
+		dprintk(D_MM, "Onboard CS4215 detected\n");
+		dbri->mm.onboard = 1;
+	}
+	if (reg2 & D_PIO0) {
+		dprintk(D_MM, "Speakerbox detected\n");
+		dbri->mm.onboard = 0;
+
+		if (reg2 & D_PIO2) {
+			printk(KERN_INFO "DBRI: Using speakerbox / "
+			       "ignoring onboard mmcodec.\n");
+			sbus_writel(D_ENPIO2, dbri->regs + REG2);
+		}
+	}
+
+	if (!(reg2 & (D_PIO0 | D_PIO2))) {
+		printk(KERN_ERR "DBRI: no mmcodec found.\n");
+		return -EIO;
+	}
+
+	cs4215_setup_pipes(dbri);
+
+	cs4215_init_data(&dbri->mm);
+
+	/* Enable capture of the status & version timeslots. */
+	recv_fixed(dbri, 18, &dbri->mm.status);
+	recv_fixed(dbri, 19, &dbri->mm.version);
+
+	dbri->mm.offset = dbri->mm.onboard ? 0 : 8;
+	if (cs4215_setctrl(dbri) == -1 || dbri->mm.version == 0xff) {
+		dprintk(D_MM, "CS4215 failed probe at offset %d\n",
+			dbri->mm.offset);
+		return -EIO;
+	}
+	dprintk(D_MM, "Found CS4215 at offset %d\n", dbri->mm.offset);
+
+	return 0;
+}
+
+/*
+****************************************************************************
+*************************** DBRI interrupt handler *************************
+****************************************************************************
+
+The DBRI communicates with the CPU mainly via a circular interrupt
+buffer.  When an interrupt is signaled, the CPU walks through the
+buffer and calls dbri_process_one_interrupt() for each interrupt word.
+Complicated interrupts are handled by dedicated functions (which
+appear first in this file).  Any pending interrupts can be serviced by
+calling dbri_process_interrupt_buffer(), which works even if the CPU's
+interrupts are disabled.  This function is used by dbri_cmdsend()
+to make sure we're synced up with the chip after each command sequence,
+even if we're running cli'ed.
+
+*/
+
+/* xmit_descs()
+ *
+ * Transmit the current TD's for recording/playing, if needed.
+ * For playback, ALSA has filled the DMA memory with new data (we hope).
+ */
+static void xmit_descs(unsigned long data)
+{
+	snd_dbri_t *dbri = (snd_dbri_t *) data;
+	dbri_streaminfo_t *info;
+	volatile s32 *cmd;
+	unsigned long flags;
+	int first_td;
+
+	if (dbri == NULL)
+		return;		/* Disabled */
+
+	/* First check the recording stream for buffer overflow */
+	info = &dbri->stream_info[DBRI_REC];
+	spin_lock_irqsave(&dbri->lock, flags);
+
+	if ((info->left >= info->size) && (info->pipe >= 0)) {
+		first_td = dbri->pipes[info->pipe].first_desc;
+
+		dprintk(D_DESC, "xmit_descs rec @ TD %d\n", first_td);
+
+		/* Stream could be closed by the time we run. */
+		if (first_td < 0) {
+			goto play;
+		}
+
+		cmd = dbri_cmdlock(dbri, NoGetLock);
+		*(cmd++) = DBRI_CMD(D_SDP, 0,
+				    dbri->pipes[info->pipe].sdp
+				    | D_SDP_P | D_SDP_EVERY | D_SDP_C);
+		*(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_td);
+		dbri_cmdsend(dbri, cmd);
+
+		/* Reset our admin of the pipe & bytes read. */
+		dbri->pipes[info->pipe].desc = first_td;
+		info->left = 0;
+	}
+
+play:
+	spin_unlock_irqrestore(&dbri->lock, flags);
+
+	/* Now check the playback stream for buffer underflow */
+	info = &dbri->stream_info[DBRI_PLAY];
+	spin_lock_irqsave(&dbri->lock, flags);
+
+	if ((info->left <= 0) && (info->pipe >= 0)) {
+		first_td = dbri->pipes[info->pipe].first_desc;
+
+		dprintk(D_DESC, "xmit_descs play @ TD %d\n", first_td);
+
+		/* Stream could be closed by the time we run. */
+		if (first_td < 0) {
+			spin_unlock_irqrestore(&dbri->lock, flags);
+			return;
+		}
+
+		cmd = dbri_cmdlock(dbri, NoGetLock);
+		*(cmd++) = DBRI_CMD(D_SDP, 0,
+				    dbri->pipes[info->pipe].sdp
+				    | D_SDP_P | D_SDP_EVERY | D_SDP_C);
+		*(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, first_td);
+		dbri_cmdsend(dbri, cmd);
+
+		/* Reset our admin of the pipe & bytes written. */
+		dbri->pipes[info->pipe].desc = first_td;
+		info->left = info->size;
+	}
+	spin_unlock_irqrestore(&dbri->lock, flags);
+}
+
+DECLARE_TASKLET(xmit_descs_task, xmit_descs, 0);
+
+/* transmission_complete_intr()
+ *
+ * Called by main interrupt handler when DBRI signals transmission complete
+ * on a pipe (interrupt triggered by the B bit in a transmit descriptor).
+ *
+ * Walks through the pipe's list of transmit buffer descriptors, releasing
+ * each one's DMA buffer (if present), flagging the descriptor available,
+ * and signaling its callback routine (if present), before proceeding
+ * to the next one.  Stops when the first descriptor is found without
+ * TBC (Transmit Buffer Complete) set, or we've run through them all.
+ */
+
+static void transmission_complete_intr(snd_dbri_t * dbri, int pipe)
+{
+	dbri_streaminfo_t *info;
+	int td;
+	int status;
+
+	info = &dbri->stream_info[DBRI_PLAY];
+
+	td = dbri->pipes[pipe].desc;
+	while (td >= 0) {
+		if (td >= DBRI_NO_DESCS) {
+			printk(KERN_ERR "DBRI: invalid td on pipe %d\n", pipe);
+			return;
+		}
+
+		status = DBRI_TD_STATUS(dbri->dma->desc[td].word4);
+		if (!(status & DBRI_TD_TBC)) {
+			break;
+		}
+
+		dprintk(D_INT, "TD %d, status 0x%02x\n", td, status);
+
+		dbri->dma->desc[td].word4 = 0;	/* Reset it for next time. */
+		info->offset += dbri->descs[td].len;
+		info->left -= dbri->descs[td].len;
+
+		/* On the last TD, transmit them all again. */
+		if (dbri->descs[td].next == -1) {
+			if (info->left > 0) {
+				printk(KERN_WARNING
+				       "%d bytes left after last transfer.\n",
+				       info->left);
+				info->left = 0;
+			}
+			tasklet_schedule(&xmit_descs_task);
+		}
+
+		td = dbri->descs[td].next;
+		dbri->pipes[pipe].desc = td;
+	}
+
+	/* Notify ALSA */
+	if (spin_is_locked(&dbri->lock)) {
+		spin_unlock(&dbri->lock);
+		snd_pcm_period_elapsed(info->substream);
+		spin_lock(&dbri->lock);
+	} else
+		snd_pcm_period_elapsed(info->substream);
+}
+
+static void reception_complete_intr(snd_dbri_t * dbri, int pipe)
+{
+	dbri_streaminfo_t *info;
+	int rd = dbri->pipes[pipe].desc;
+	s32 status;
+
+	if (rd < 0 || rd >= DBRI_NO_DESCS) {
+		printk(KERN_ERR "DBRI: invalid rd on pipe %d\n", pipe);
+		return;
+	}
+
+	dbri->descs[rd].inuse = 0;
+	dbri->pipes[pipe].desc = dbri->descs[rd].next;
+	status = dbri->dma->desc[rd].word1;
+	dbri->dma->desc[rd].word1 = 0;	/* Reset it for next time. */
+
+	info = &dbri->stream_info[DBRI_REC];
+	info->offset += DBRI_RD_CNT(status);
+	info->left += DBRI_RD_CNT(status);
+
+	/* FIXME: Check status */
+
+	dprintk(D_INT, "Recv RD %d, status 0x%02x, len %d\n",
+		rd, DBRI_RD_STATUS(status), DBRI_RD_CNT(status));
+
+	/* On the last TD, transmit them all again. */
+	if (dbri->descs[rd].next == -1) {
+		if (info->left > info->size) {
+			printk(KERN_WARNING
+			       "%d bytes recorded in %d size buffer.\n",
+			       info->left, info->size);
+		}
+		tasklet_schedule(&xmit_descs_task);
+	}
+
+	/* Notify ALSA */
+	if (spin_is_locked(&dbri->lock)) {
+		spin_unlock(&dbri->lock);
+		snd_pcm_period_elapsed(info->substream);
+		spin_lock(&dbri->lock);
+	} else
+		snd_pcm_period_elapsed(info->substream);
+}
+
+static void dbri_process_one_interrupt(snd_dbri_t * dbri, int x)
+{
+	int val = D_INTR_GETVAL(x);
+	int channel = D_INTR_GETCHAN(x);
+	int command = D_INTR_GETCMD(x);
+	int code = D_INTR_GETCODE(x);
+#ifdef DBRI_DEBUG
+	int rval = D_INTR_GETRVAL(x);
+#endif
+
+	if (channel == D_INTR_CMD) {
+		dprintk(D_CMD, "INTR: Command: %-5s  Value:%d\n",
+			cmds[command], val);
+	} else {
+		dprintk(D_INT, "INTR: Chan:%d Code:%d Val:%#x\n",
+			channel, code, rval);
+	}
+
+	if (channel == D_INTR_CMD && command == D_WAIT) {
+		dbri->wait_seen++;
+		return;
+	}
+
+	switch (code) {
+	case D_INTR_BRDY:
+		reception_complete_intr(dbri, channel);
+		break;
+	case D_INTR_XCMP:
+	case D_INTR_MINT:
+		transmission_complete_intr(dbri, channel);
+		break;
+	case D_INTR_UNDR:
+		/* UNDR - Transmission underrun
+		 * resend SDP command with clear pipe bit (C) set
+		 */
+		{
+			volatile s32 *cmd;
+
+			int pipe = channel;
+			int td = dbri->pipes[pipe].desc;
+
+			dbri->dma->desc[td].word4 = 0;
+			cmd = dbri_cmdlock(dbri, NoGetLock);
+			*(cmd++) = DBRI_CMD(D_SDP, 0,
+					    dbri->pipes[pipe].sdp
+					    | D_SDP_P | D_SDP_C | D_SDP_2SAME);
+			*(cmd++) = dbri->dma_dvma + dbri_dma_off(desc, td);
+			dbri_cmdsend(dbri, cmd);
+		}
+		break;
+	case D_INTR_FXDT:
+		/* FXDT - Fixed data change */
+		if (dbri->pipes[channel].sdp & D_SDP_MSB)
+			val = reverse_bytes(val, dbri->pipes[channel].length);
+
+		if (dbri->pipes[channel].recv_fixed_ptr)
+			*(dbri->pipes[channel].recv_fixed_ptr) = val;
+		break;
+	default:
+		if (channel != D_INTR_CMD)
+			printk(KERN_WARNING
+			       "DBRI: Ignored Interrupt: %d (0x%x)\n", code, x);
+	}
+}
+
+/* dbri_process_interrupt_buffer advances through the DBRI's interrupt
+ * buffer until it finds a zero word (indicating nothing more to do
+ * right now).  Non-zero words require processing and are handed off
+ * to dbri_process_one_interrupt AFTER advancing the pointer.  This
+ * order is important since we might recurse back into this function
+ * and need to make sure the pointer has been advanced first.
+ */
+static void dbri_process_interrupt_buffer(snd_dbri_t * dbri)
+{
+	s32 x;
+
+	while ((x = dbri->dma->intr[dbri->dbri_irqp]) != 0) {
+		dbri->dma->intr[dbri->dbri_irqp] = 0;
+		dbri->dbri_irqp++;
+		if (dbri->dbri_irqp == (DBRI_NO_INTS * DBRI_INT_BLK))
+			dbri->dbri_irqp = 1;
+		else if ((dbri->dbri_irqp & (DBRI_INT_BLK - 1)) == 0)
+			dbri->dbri_irqp++;
+
+		dbri_process_one_interrupt(dbri, x);
+	}
+}
+
+static irqreturn_t snd_dbri_interrupt(int irq, void *dev_id,
+				      struct pt_regs *regs)
+{
+	snd_dbri_t *dbri = dev_id;
+	static int errcnt = 0;
+	int x;
+
+	if (dbri == NULL)
+		return IRQ_NONE;
+	spin_lock(&dbri->lock);
+
+	/*
+	 * Read it, so the interrupt goes away.
+	 */
+	x = sbus_readl(dbri->regs + REG1);
+
+	if (x & (D_MRR | D_MLE | D_LBG | D_MBE)) {
+		u32 tmp;
+
+		if (x & D_MRR)
+			printk(KERN_ERR
+			       "DBRI: Multiple Error Ack on SBus reg1=0x%x\n",
+			       x);
+		if (x & D_MLE)
+			printk(KERN_ERR
+			       "DBRI: Multiple Late Error on SBus reg1=0x%x\n",
+			       x);
+		if (x & D_LBG)
+			printk(KERN_ERR
+			       "DBRI: Lost Bus Grant on SBus reg1=0x%x\n", x);
+		if (x & D_MBE)
+			printk(KERN_ERR
+			       "DBRI: Burst Error on SBus reg1=0x%x\n", x);
+
+		/* Some of these SBus errors cause the chip's SBus circuitry
+		 * to be disabled, so just re-enable and try to keep going.
+		 *
+		 * The only one I've seen is MRR, which will be triggered
+		 * if you let a transmit pipe underrun, then try to CDP it.
+		 *
+		 * If these things persist, we should probably reset
+		 * and re-init the chip.
+		 */
+		if ((++errcnt) % 10 == 0) {
+			dprintk(D_INT, "Interrupt errors exceeded.\n");
+			dbri_reset(dbri);
+		} else {
+			tmp = sbus_readl(dbri->regs + REG0);
+			tmp &= ~(D_D);
+			sbus_writel(tmp, dbri->regs + REG0);
+		}
+	}
+
+	dbri_process_interrupt_buffer(dbri);
+
+	/* FIXME: Write 0 into regs to ACK interrupt */
+
+	spin_unlock(&dbri->lock);
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************
+		PCM Interface
+****************************************************************************/
+static snd_pcm_hardware_t snd_dbri_pcm_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID),
+	.formats		= SNDRV_PCM_FMTBIT_MU_LAW |
+				  SNDRV_PCM_FMTBIT_A_LAW |
+				  SNDRV_PCM_FMTBIT_U8 |
+				  SNDRV_PCM_FMTBIT_S16_BE,
+	.rates			= SNDRV_PCM_RATE_8000_48000,
+	.rate_min		= 8000,
+	.rate_max		= 48000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= (64 * 1024),
+	.period_bytes_min	= 1,
+	.period_bytes_max	= DBRI_TD_MAXCNT,
+	.periods_min		= 1,
+	.periods_max		= 1024,
+};
+
+static int snd_dbri_open(snd_pcm_substream_t * substream)
+{
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+	unsigned long flags;
+
+	dprintk(D_USR, "open audio output.\n");
+	runtime->hw = snd_dbri_pcm_hw;
+
+	spin_lock_irqsave(&dbri->lock, flags);
+	info->substream = substream;
+	info->left = 0;
+	info->offset = 0;
+	info->dvma_buffer = 0;
+	info->pipe = -1;
+	spin_unlock_irqrestore(&dbri->lock, flags);
+
+	cs4215_open(dbri);
+
+	return 0;
+}
+
+static int snd_dbri_close(snd_pcm_substream_t * substream)
+{
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+
+	dprintk(D_USR, "close audio output.\n");
+	info->substream = NULL;
+	info->left = 0;
+	info->offset = 0;
+
+	return 0;
+}
+
+static int snd_dbri_hw_params(snd_pcm_substream_t * substream,
+			      snd_pcm_hw_params_t * hw_params)
+{
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+	int direction;
+	int ret;
+
+	/* set sampling rate, audio format and number of channels */
+	ret = cs4215_prepare(dbri, params_rate(hw_params),
+			     params_format(hw_params),
+			     params_channels(hw_params));
+	if (ret != 0)
+		return ret;
+
+	if ((ret = snd_pcm_lib_malloc_pages(substream,
+				params_buffer_bytes(hw_params))) < 0) {
+		snd_printk(KERN_ERR "malloc_pages failed with %d\n", ret);
+		return ret;
+	}
+
+	/* hw_params can get called multiple times. Only map the DMA once.
+	 */
+	if (info->dvma_buffer == 0) {
+		if (DBRI_STREAMNO(substream) == DBRI_PLAY)
+			direction = SBUS_DMA_TODEVICE;
+		else
+			direction = SBUS_DMA_FROMDEVICE;
+
+		info->dvma_buffer = sbus_map_single(dbri->sdev,
+					runtime->dma_area,
+					params_buffer_bytes(hw_params),
+					direction);
+	}
+
+	direction = params_buffer_bytes(hw_params);
+	dprintk(D_USR, "hw_params: %d bytes, dvma=%x\n",
+		direction, info->dvma_buffer);
+	return 0;
+}
+
+static int snd_dbri_hw_free(snd_pcm_substream_t * substream)
+{
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+	int direction;
+	dprintk(D_USR, "hw_free.\n");
+
+	/* hw_free can get called multiple times. Only unmap the DMA once.
+	 */
+	if (info->dvma_buffer) {
+		if (DBRI_STREAMNO(substream) == DBRI_PLAY)
+			direction = SBUS_DMA_TODEVICE;
+		else
+			direction = SBUS_DMA_FROMDEVICE;
+
+		sbus_unmap_single(dbri->sdev, info->dvma_buffer,
+				  substream->runtime->buffer_size, direction);
+		info->dvma_buffer = 0;
+	}
+	info->pipe = -1;
+
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int snd_dbri_prepare(snd_pcm_substream_t * substream)
+{
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+	snd_pcm_runtime_t *runtime = substream->runtime;
+	int ret;
+
+	info->size = snd_pcm_lib_buffer_bytes(substream);
+	if (DBRI_STREAMNO(substream) == DBRI_PLAY)
+		info->pipe = 4;	/* Send pipe */
+	else {
+		info->pipe = 6;	/* Receive pipe */
+		info->left = info->size;	/* To trigger submittal */
+	}
+
+	spin_lock_irq(&dbri->lock);
+
+	/* Setup the all the transmit/receive desciptors to cover the
+	 * whole DMA buffer.
+	 */
+	ret = setup_descs(dbri, DBRI_STREAMNO(substream),
+			  snd_pcm_lib_period_bytes(substream));
+
+	runtime->stop_threshold = DBRI_TD_MAXCNT / runtime->channels;
+
+	spin_unlock_irq(&dbri->lock);
+
+	dprintk(D_USR, "prepare audio output. %d bytes\n", info->size);
+	return ret;
+}
+
+static int snd_dbri_trigger(snd_pcm_substream_t * substream, int cmd)
+{
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		dprintk(D_USR, "start audio, period is %d bytes\n",
+			(int)snd_pcm_lib_period_bytes(substream));
+		/* Enable & schedule the tasklet that re-submits the TDs. */
+		xmit_descs_task.data = (unsigned long)dbri;
+		tasklet_schedule(&xmit_descs_task);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		dprintk(D_USR, "stop audio.\n");
+		/* Make the tasklet bail out immediately. */
+		xmit_descs_task.data = 0;
+		reset_pipe(dbri, info->pipe);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static snd_pcm_uframes_t snd_dbri_pointer(snd_pcm_substream_t * substream)
+{
+	snd_dbri_t *dbri = snd_pcm_substream_chip(substream);
+	dbri_streaminfo_t *info = DBRI_STREAM(dbri, substream);
+	snd_pcm_uframes_t ret;
+
+	ret = bytes_to_frames(substream->runtime, info->offset)
+		% substream->runtime->buffer_size;
+	dprintk(D_USR, "I/O pointer: %ld frames, %d bytes left.\n",
+		ret, info->left);
+	return ret;
+}
+
+static snd_pcm_ops_t snd_dbri_ops = {
+	.open = snd_dbri_open,
+	.close = snd_dbri_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_dbri_hw_params,
+	.hw_free = snd_dbri_hw_free,
+	.prepare = snd_dbri_prepare,
+	.trigger = snd_dbri_trigger,
+	.pointer = snd_dbri_pointer,
+};
+
+static int __devinit snd_dbri_pcm(snd_dbri_t * dbri)
+{
+	snd_pcm_t *pcm;
+	int err;
+
+	if ((err = snd_pcm_new(dbri->card,
+			       /* ID */		    "sun_dbri",
+			       /* device */	    0,
+			       /* playback count */ 1,
+			       /* capture count */  1, &pcm)) < 0)
+		return err;
+	snd_assert(pcm != NULL, return -EINVAL);
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_dbri_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_dbri_ops);
+
+	pcm->private_data = dbri;
+	pcm->info_flags = 0;
+	strcpy(pcm->name, dbri->card->shortname);
+	dbri->pcm = pcm;
+
+	if ((err = snd_pcm_lib_preallocate_pages_for_all(pcm,
+			SNDRV_DMA_TYPE_CONTINUOUS,
+			snd_dma_continuous_data(GFP_KERNEL),
+			64 * 1024, 64 * 1024)) < 0) {
+		return err;
+	}
+
+	return 0;
+}
+
+/*****************************************************************************
+			Mixer interface
+*****************************************************************************/
+
+static int snd_cs4215_info_volume(snd_kcontrol_t * kcontrol,
+				  snd_ctl_elem_info_t * uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	if (kcontrol->private_value == DBRI_PLAY) {
+		uinfo->value.integer.max = DBRI_MAX_VOLUME;
+	} else {
+		uinfo->value.integer.max = DBRI_MAX_GAIN;
+	}
+	return 0;
+}
+
+static int snd_cs4215_get_volume(snd_kcontrol_t * kcontrol,
+				 snd_ctl_elem_value_t * ucontrol)
+{
+	snd_dbri_t *dbri = snd_kcontrol_chip(kcontrol);
+	dbri_streaminfo_t *info;
+	snd_assert(dbri != NULL, return -EINVAL);
+	info = &dbri->stream_info[kcontrol->private_value];
+	snd_assert(info != NULL, return -EINVAL);
+
+	ucontrol->value.integer.value[0] = info->left_gain;
+	ucontrol->value.integer.value[1] = info->right_gain;
+	return 0;
+}
+
+static int snd_cs4215_put_volume(snd_kcontrol_t * kcontrol,
+				 snd_ctl_elem_value_t * ucontrol)
+{
+	snd_dbri_t *dbri = snd_kcontrol_chip(kcontrol);
+	dbri_streaminfo_t *info = &dbri->stream_info[kcontrol->private_value];
+	unsigned long flags;
+	int changed = 0;
+
+	if (info->left_gain != ucontrol->value.integer.value[0]) {
+		info->left_gain = ucontrol->value.integer.value[0];
+		changed = 1;
+	}
+	if (info->right_gain != ucontrol->value.integer.value[1]) {
+		info->right_gain = ucontrol->value.integer.value[1];
+		changed = 1;
+	}
+	if (changed == 1) {
+		/* First mute outputs, and wait 1/8000 sec (125 us)
+		 * to make sure this takes.  This avoids clicking noises.
+		 */
+		spin_lock_irqsave(&dbri->lock, flags);
+
+		cs4215_setdata(dbri, 1);
+		udelay(125);
+		cs4215_setdata(dbri, 0);
+
+		spin_unlock_irqrestore(&dbri->lock, flags);
+	}
+	return changed;
+}
+
+static int snd_cs4215_info_single(snd_kcontrol_t * kcontrol,
+				  snd_ctl_elem_info_t * uinfo)
+{
+	int mask = (kcontrol->private_value >> 16) & 0xff;
+
+	uinfo->type = (mask == 1) ?
+	    SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = mask;
+	return 0;
+}
+
+static int snd_cs4215_get_single(snd_kcontrol_t * kcontrol,
+				 snd_ctl_elem_value_t * ucontrol)
+{
+	snd_dbri_t *dbri = snd_kcontrol_chip(kcontrol);
+	int elem = kcontrol->private_value & 0xff;
+	int shift = (kcontrol->private_value >> 8) & 0xff;
+	int mask = (kcontrol->private_value >> 16) & 0xff;
+	int invert = (kcontrol->private_value >> 24) & 1;
+	snd_assert(dbri != NULL, return -EINVAL);
+
+	if (elem < 4) {
+		ucontrol->value.integer.value[0] =
+		    (dbri->mm.data[elem] >> shift) & mask;
+	} else {
+		ucontrol->value.integer.value[0] =
+		    (dbri->mm.ctrl[elem - 4] >> shift) & mask;
+	}
+
+	if (invert == 1) {
+		ucontrol->value.integer.value[0] =
+		    mask - ucontrol->value.integer.value[0];
+	}
+	return 0;
+}
+
+static int snd_cs4215_put_single(snd_kcontrol_t * kcontrol,
+				 snd_ctl_elem_value_t * ucontrol)
+{
+	snd_dbri_t *dbri = snd_kcontrol_chip(kcontrol);
+	unsigned long flags;
+	int elem = kcontrol->private_value & 0xff;
+	int shift = (kcontrol->private_value >> 8) & 0xff;
+	int mask = (kcontrol->private_value >> 16) & 0xff;
+	int invert = (kcontrol->private_value >> 24) & 1;
+	int changed = 0;
+	unsigned short val;
+	snd_assert(dbri != NULL, return -EINVAL);
+
+	val = (ucontrol->value.integer.value[0] & mask);
+	if (invert == 1)
+		val = mask - val;
+	val <<= shift;
+
+	if (elem < 4) {
+		dbri->mm.data[elem] = (dbri->mm.data[elem] &
+				       ~(mask << shift)) | val;
+		changed = (val != dbri->mm.data[elem]);
+	} else {
+		dbri->mm.ctrl[elem - 4] = (dbri->mm.ctrl[elem - 4] &
+					   ~(mask << shift)) | val;
+		changed = (val != dbri->mm.ctrl[elem - 4]);
+	}
+
+	dprintk(D_GEN, "put_single: mask=0x%x, changed=%d, "
+		"mixer-value=%ld, mm-value=0x%x\n",
+		mask, changed, ucontrol->value.integer.value[0],
+		dbri->mm.data[elem & 3]);
+
+	if (changed) {
+		/* First mute outputs, and wait 1/8000 sec (125 us)
+		 * to make sure this takes.  This avoids clicking noises.
+		 */
+		spin_lock_irqsave(&dbri->lock, flags);
+
+		cs4215_setdata(dbri, 1);
+		udelay(125);
+		cs4215_setdata(dbri, 0);
+
+		spin_unlock_irqrestore(&dbri->lock, flags);
+	}
+	return changed;
+}
+
+/* Entries 0-3 map to the 4 data timeslots, entries 4-7 map to the 4 control
+   timeslots. Shift is the bit offset in the timeslot, mask defines the
+   number of bits. invert is a boolean for use with attenuation.
+ */
+#define CS4215_SINGLE(xname, entry, shift, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+  .info = snd_cs4215_info_single, \
+  .get = snd_cs4215_get_single, .put = snd_cs4215_put_single, \
+  .private_value = entry | (shift << 8) | (mask << 16) | (invert << 24) },
+
+static snd_kcontrol_new_t dbri_controls[] __devinitdata = {
+	{
+	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	 .name  = "Playback Volume",
+	 .info  = snd_cs4215_info_volume,
+	 .get   = snd_cs4215_get_volume,
+	 .put   = snd_cs4215_put_volume,
+	 .private_value = DBRI_PLAY,
+	 },
+	CS4215_SINGLE("Headphone switch", 0, 7, 1, 0)
+	CS4215_SINGLE("Line out switch", 0, 6, 1, 0)
+	CS4215_SINGLE("Speaker switch", 1, 6, 1, 0)
+	{
+	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	 .name  = "Capture Volume",
+	 .info  = snd_cs4215_info_volume,
+	 .get   = snd_cs4215_get_volume,
+	 .put   = snd_cs4215_put_volume,
+	 .private_value = DBRI_REC,
+	 },
+	/* FIXME: mic/line switch */
+	CS4215_SINGLE("Line in switch", 2, 4, 1, 0)
+	CS4215_SINGLE("High Pass Filter switch", 5, 7, 1, 0)
+	CS4215_SINGLE("Monitor Volume", 3, 4, 0xf, 1)
+	CS4215_SINGLE("Mic boost", 4, 4, 1, 1)
+};
+
+#define NUM_CS4215_CONTROLS (sizeof(dbri_controls)/sizeof(snd_kcontrol_new_t))
+
+static int __init snd_dbri_mixer(snd_dbri_t * dbri)
+{
+	snd_card_t *card;
+	int idx, err;
+
+	snd_assert(dbri != NULL && dbri->card != NULL, return -EINVAL);
+
+	card = dbri->card;
+	strcpy(card->mixername, card->shortname);
+
+	for (idx = 0; idx < NUM_CS4215_CONTROLS; idx++) {
+		if ((err = snd_ctl_add(card,
+				       snd_ctl_new1(&dbri_controls[idx],
+						    dbri))) < 0)
+			return err;
+	}
+
+	for (idx = DBRI_REC; idx < DBRI_NO_STREAMS; idx++) {
+		dbri->stream_info[idx].left_gain = 0;
+		dbri->stream_info[idx].right_gain = 0;
+		dbri->stream_info[idx].balance = DBRI_MID_BALANCE;
+	}
+
+	return 0;
+}
+
+/****************************************************************************
+			/proc interface
+****************************************************************************/
+static void dbri_regs_read(snd_info_entry_t * entry, snd_info_buffer_t * buffer)
+{
+	snd_dbri_t *dbri = entry->private_data;
+
+	snd_iprintf(buffer, "REG0: 0x%x\n", sbus_readl(dbri->regs + REG0));
+	snd_iprintf(buffer, "REG2: 0x%x\n", sbus_readl(dbri->regs + REG2));
+	snd_iprintf(buffer, "REG8: 0x%x\n", sbus_readl(dbri->regs + REG8));
+	snd_iprintf(buffer, "REG9: 0x%x\n", sbus_readl(dbri->regs + REG9));
+}
+
+#ifdef DBRI_DEBUG
+static void dbri_debug_read(snd_info_entry_t * entry,
+			    snd_info_buffer_t * buffer)
+{
+	snd_dbri_t *dbri = entry->private_data;
+	int pipe;
+	snd_iprintf(buffer, "debug=%d\n", dbri_debug);
+
+	snd_iprintf(buffer, "CHI pipe in=%d, out=%d\n",
+		    dbri->chi_in_pipe, dbri->chi_out_pipe);
+	for (pipe = 0; pipe < 32; pipe++) {
+		if (pipe_active(dbri, pipe)) {
+			struct dbri_pipe *pptr = &dbri->pipes[pipe];
+			snd_iprintf(buffer,
+				    "Pipe %d: %s SDP=0x%x desc=%d, "
+				    "len=%d @ %d prev: %d next %d\n",
+				    pipe,
+				    (pptr->direction ==
+				     PIPEinput ? "input" : "output"), pptr->sdp,
+				    pptr->desc, pptr->length, pptr->cycle,
+				    pptr->prevpipe, pptr->nextpipe);
+		}
+	}
+}
+
+static void dbri_debug_write(snd_info_entry_t * entry,
+			     snd_info_buffer_t * buffer)
+{
+	char line[80];
+	int i;
+
+	if (snd_info_get_line(buffer, line, 80) == 0) {
+		sscanf(line, "%d\n", &i);
+		dbri_debug = i & 0x3f;
+	}
+}
+#endif
+
+void snd_dbri_proc(snd_dbri_t * dbri)
+{
+	snd_info_entry_t *entry;
+	int err;
+
+	err = snd_card_proc_new(dbri->card, "regs", &entry);
+	snd_info_set_text_ops(entry, dbri, 1024, dbri_regs_read);
+
+#ifdef DBRI_DEBUG
+	err = snd_card_proc_new(dbri->card, "debug", &entry);
+	snd_info_set_text_ops(entry, dbri, 4096, dbri_debug_read);
+	entry->mode = S_IFREG | S_IRUGO | S_IWUSR; /* Writable for root */
+	entry->c.text.write_size = 256;
+	entry->c.text.write = dbri_debug_write;
+#endif
+}
+
+/*
+****************************************************************************
+**************************** Initialization ********************************
+****************************************************************************
+*/
+static void snd_dbri_free(snd_dbri_t * dbri);
+
+static int __init snd_dbri_create(snd_card_t * card,
+				  struct sbus_dev *sdev,
+				  struct linux_prom_irqs *irq, int dev)
+{
+	snd_dbri_t *dbri = card->private_data;
+	int err;
+
+	spin_lock_init(&dbri->lock);
+	dbri->card = card;
+	dbri->sdev = sdev;
+	dbri->irq = irq->pri;
+	dbri->dbri_version = sdev->prom_name[9];
+
+	dbri->dma = sbus_alloc_consistent(sdev, sizeof(struct dbri_dma),
+					  &dbri->dma_dvma);
+	memset((void *)dbri->dma, 0, sizeof(struct dbri_dma));
+
+	dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n",
+		dbri->dma, dbri->dma_dvma);
+
+	/* Map the registers into memory. */
+	dbri->regs_size = sdev->reg_addrs[0].reg_size;
+	dbri->regs = sbus_ioremap(&sdev->resource[0], 0,
+				  dbri->regs_size, "DBRI Registers");
+	if (!dbri->regs) {
+		printk(KERN_ERR "DBRI: could not allocate registers\n");
+		sbus_free_consistent(sdev, sizeof(struct dbri_dma),
+				     (void *)dbri->dma, dbri->dma_dvma);
+		return -EIO;
+	}
+
+	err = request_irq(dbri->irq, snd_dbri_interrupt, SA_SHIRQ,
+			  "DBRI audio", dbri);
+	if (err) {
+		printk(KERN_ERR "DBRI: Can't get irq %d\n", dbri->irq);
+		sbus_iounmap(dbri->regs, dbri->regs_size);
+		sbus_free_consistent(sdev, sizeof(struct dbri_dma),
+				     (void *)dbri->dma, dbri->dma_dvma);
+		return err;
+	}
+
+	/* Do low level initialization of the DBRI and CS4215 chips */
+	dbri_initialize(dbri);
+	err = cs4215_init(dbri);
+	if (err) {
+		snd_dbri_free(dbri);
+		return err;
+	}
+
+	dbri->next = dbri_list;
+	dbri_list = dbri;
+
+	return 0;
+}
+
+static void snd_dbri_free(snd_dbri_t * dbri)
+{
+	dprintk(D_GEN, "snd_dbri_free\n");
+	dbri_reset(dbri);
+
+	if (dbri->irq)
+		free_irq(dbri->irq, dbri);
+
+	if (dbri->regs)
+		sbus_iounmap(dbri->regs, dbri->regs_size);
+
+	if (dbri->dma)
+		sbus_free_consistent(dbri->sdev, sizeof(struct dbri_dma),
+				     (void *)dbri->dma, dbri->dma_dvma);
+}
+
+static int __init dbri_attach(int prom_node, struct sbus_dev *sdev)
+{
+	snd_dbri_t *dbri;
+	struct linux_prom_irqs irq;
+	struct resource *rp;
+	snd_card_t *card;
+	static int dev = 0;
+	int err;
+
+	if (sdev->prom_name[9] < 'e') {
+		printk(KERN_ERR "DBRI: unsupported chip version %c found.\n",
+		       sdev->prom_name[9]);
+		return -EIO;
+	}
+
+	if (dev >= SNDRV_CARDS)
+		return -ENODEV;
+	if (!enable[dev]) {
+		dev++;
+		return -ENOENT;
+	}
+
+	prom_getproperty(prom_node, "intr", (char *)&irq, sizeof(irq));
+
+	card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+			    sizeof(snd_dbri_t));
+	if (card == NULL)
+		return -ENOMEM;
+
+	strcpy(card->driver, "DBRI");
+	strcpy(card->shortname, "Sun DBRI");
+	rp = &sdev->resource[0];
+	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+		card->shortname,
+		rp->flags & 0xffL, rp->start, __irq_itoa(irq.pri));
+
+	if ((err = snd_dbri_create(card, sdev, &irq, dev)) < 0) {
+		snd_card_free(card);
+		return err;
+	}
+
+	dbri = (snd_dbri_t *) card->private_data;
+	if ((err = snd_dbri_pcm(dbri)) < 0) {
+		snd_dbri_free(dbri);
+		snd_card_free(card);
+		return err;
+	}
+
+	if ((err = snd_dbri_mixer(dbri)) < 0) {
+		snd_dbri_free(dbri);
+		snd_card_free(card);
+		return err;
+	}
+
+	/* /proc file handling */
+	snd_dbri_proc(dbri);
+
+	if ((err = snd_card_register(card)) < 0) {
+		snd_dbri_free(dbri);
+		snd_card_free(card);
+		return err;
+	}
+
+	printk(KERN_INFO "audio%d at %p (irq %d) is DBRI(%c)+CS4215(%d)\n",
+	       dev, dbri->regs,
+	       dbri->irq, dbri->dbri_version, dbri->mm.version);
+	dev++;
+
+	return 0;
+}
+
+/* Probe for the dbri chip and then attach the driver. */
+static int __init dbri_init(void)
+{
+	struct sbus_bus *sbus;
+	struct sbus_dev *sdev;
+	int found = 0;
+
+	/* Probe each SBUS for the DBRI chip(s). */
+	for_all_sbusdev(sdev, sbus) {
+		/*
+		 * The version is coded in the last character
+		 */
+		if (!strncmp(sdev->prom_name, "SUNW,DBRI", 9)) {
+			dprintk(D_GEN, "DBRI: Found %s in SBUS slot %d\n",
+				sdev->prom_name, sdev->slot);
+
+			if (dbri_attach(sdev->prom_node, sdev) == 0)
+				found++;
+		}
+	}
+
+	return (found > 0) ? 0 : -EIO;
+}
+
+static void __exit dbri_exit(void)
+{
+	snd_dbri_t *this = dbri_list;
+
+	while (this != NULL) {
+		snd_dbri_t *next = this->next;
+		snd_card_t *card = this->card;
+
+		snd_dbri_free(this);
+		snd_card_free(card);
+		this = next;
+	}
+	dbri_list = NULL;
+}
+
+module_init(dbri_init);
+module_exit(dbri_exit);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index b5e734d..8298c46 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -153,6 +153,7 @@
 	unsigned int format;     /* USB data format */
 	unsigned int datapipe;   /* the data i/o pipe */
 	unsigned int syncpipe;   /* 1 - async out or adaptive in */
+	unsigned int datainterval;	/* log_2 of data packet interval */
 	unsigned int syncinterval;  /* P for adaptive mode, 0 otherwise */
 	unsigned int freqn;      /* nominal sampling rate in fs/fps in Q16.16 format */
 	unsigned int freqm;      /* momentary sampling rate in fs/fps in Q16.16 format */
@@ -518,7 +519,8 @@
 		if (subs->fill_max)
 			counts = subs->maxframesize; /* fixed */
 		else {
-			subs->phase = (subs->phase & 0xffff) + subs->freqm;
+			subs->phase = (subs->phase & 0xffff)
+				+ (subs->freqm << subs->datainterval);
 			counts = subs->phase >> 16;
 			if (counts > subs->maxframesize)
 				counts = subs->maxframesize;
@@ -790,7 +792,7 @@
  */
 static int wait_clear_urbs(snd_usb_substream_t *subs)
 {
-	int timeout = HZ;
+	unsigned long end_time = jiffies + msecs_to_jiffies(1000);
 	unsigned int i;
 	int alive;
 
@@ -810,7 +812,7 @@
 			break;
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1);
-	} while (--timeout > 0);
+	} while (time_before(jiffies, end_time));
 	if (alive)
 		snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive);
 	return 0;
@@ -899,16 +901,19 @@
 	else
 		subs->freqn = get_usb_high_speed_rate(rate);
 	subs->freqm = subs->freqn;
-	subs->freqmax = subs->freqn + (subs->freqn >> 2); /* max. allowed frequency */
-	subs->phase = 0;
-
-	/* calculate the max. size of packet */
-	maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3)) >> 16;
-	if (subs->maxpacksize && maxsize > subs->maxpacksize) {
-		//snd_printd(KERN_DEBUG "maxsize %d is greater than defined size %d\n",
-		//	   maxsize, subs->maxpacksize);
+	/* calculate max. frequency */
+	if (subs->maxpacksize) {
+		/* whatever fits into a max. size packet */
 		maxsize = subs->maxpacksize;
+		subs->freqmax = (maxsize / (frame_bits >> 3))
+				<< (16 - subs->datainterval);
+	} else {
+		/* no max. packet size: just take 25% higher than nominal */
+		subs->freqmax = subs->freqn + (subs->freqn >> 2);
+		maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3))
+				>> (16 - subs->datainterval);
 	}
+	subs->phase = 0;
 
 	if (subs->fill_max)
 		subs->curpacksize = subs->maxpacksize;
@@ -918,7 +923,7 @@
 	if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
 		urb_packs = nrpacks;
 	else
-		urb_packs = nrpacks * 8;
+		urb_packs = (nrpacks * 8) >> subs->datainterval;
 
 	/* allocate a temporary buffer for playback */
 	if (is_playback) {
@@ -991,7 +996,7 @@
 		u->urb->pipe = subs->datapipe;
 		u->urb->transfer_flags = URB_ISO_ASAP;
 		u->urb->number_of_packets = u->packets;
-		u->urb->interval = 1;
+		u->urb->interval = 1 << subs->datainterval;
 		u->urb->context = u;
 		u->urb->complete = snd_usb_complete_callback(snd_complete_urb);
 	}
@@ -1195,6 +1200,12 @@
 		subs->datapipe = usb_sndisocpipe(dev, ep);
 	else
 		subs->datapipe = usb_rcvisocpipe(dev, ep);
+	if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH &&
+	    get_endpoint(alts, 0)->bInterval >= 1 &&
+	    get_endpoint(alts, 0)->bInterval <= 4)
+		subs->datainterval = get_endpoint(alts, 0)->bInterval - 1;
+	else
+		subs->datainterval = 0;
 	subs->syncpipe = subs->syncinterval = 0;
 	subs->maxpacksize = fmt->maxpacksize;
 	subs->fill_max = 0;
@@ -2397,10 +2408,9 @@
 	if (chip->usb_id == USB_ID(0x041e, 0x3000) ||
 	    chip->usb_id == USB_ID(0x041e, 0x3020)) {
 		if (fmt[3] == USB_FORMAT_TYPE_I &&
-		    stream == SNDRV_PCM_STREAM_PLAYBACK &&
 		    fp->rates != SNDRV_PCM_RATE_48000 &&
 		    fp->rates != SNDRV_PCM_RATE_96000)
-			return -1; /* use 48k only */
+			return -1;
 	}
 #endif
 	return 0;
@@ -2492,8 +2502,10 @@
 		fp->altset_idx = i;
 		fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
 		fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
-		/* FIXME: decode wMaxPacketSize of high bandwith endpoints */
 		fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+		if (snd_usb_get_speed(dev) == USB_SPEED_HIGH)
+			fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
+					* (fp->maxpacksize & 0x7ff);
 		fp->attributes = csep[3];
 
 		/* some quirks for attributes here */
@@ -2723,7 +2735,8 @@
  * to detect the sample rate is by looking at wMaxPacketSize.
  */
 static int create_ua700_ua25_quirk(snd_usb_audio_t *chip,
-				   struct usb_interface *iface)
+				   struct usb_interface *iface,
+				   const snd_usb_audio_quirk_t *quirk)
 {
 	static const struct audioformat ua_format = {
 		.format = SNDRV_PCM_FORMAT_S24_3LE,
@@ -2814,7 +2827,9 @@
 /*
  * Create a stream for an Edirol UA-1000 interface.
  */
-static int create_ua1000_quirk(snd_usb_audio_t *chip, struct usb_interface *iface)
+static int create_ua1000_quirk(snd_usb_audio_t *chip,
+			       struct usb_interface *iface,
+			       const snd_usb_audio_quirk_t *quirk)
 {
 	static const struct audioformat ua1000_format = {
 		.format = SNDRV_PCM_FORMAT_S32_LE,
@@ -2891,6 +2906,13 @@
 	return 0;
 }
 
+static int ignore_interface_quirk(snd_usb_audio_t *chip,
+				  struct usb_interface *iface,
+				  const snd_usb_audio_quirk_t *quirk)
+{
+	return 0;
+}
+
 
 /*
  * boot quirks
@@ -2926,8 +2948,6 @@
 
 static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
 {
-#if 0
-	/* TODO: enable this when high speed synchronization actually works */
 	u8 buf = 1;
 
 	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
@@ -2939,7 +2959,6 @@
 				1, 2000, NULL, 0, 1000);
 		return -ENODEV;
 	}
-#endif
 	return 0;
 }
 
@@ -2956,28 +2975,28 @@
 				struct usb_interface *iface,
 				const snd_usb_audio_quirk_t *quirk)
 {
-	switch (quirk->type) {
-	case QUIRK_MIDI_FIXED_ENDPOINT:
-	case QUIRK_MIDI_YAMAHA:
-	case QUIRK_MIDI_MIDIMAN:
-	case QUIRK_MIDI_NOVATION:
-	case QUIRK_MIDI_MOTU:
-	case QUIRK_MIDI_EMAGIC:
-		return snd_usb_create_midi_interface(chip, iface, quirk);
-	case QUIRK_COMPOSITE:
-		return create_composite_quirk(chip, iface, quirk);
-	case QUIRK_AUDIO_FIXED_ENDPOINT:
-		return create_fixed_stream_quirk(chip, iface, quirk);
-	case QUIRK_AUDIO_STANDARD_INTERFACE:
-	case QUIRK_MIDI_STANDARD_INTERFACE:
-		return create_standard_interface_quirk(chip, iface, quirk);
-	case QUIRK_AUDIO_EDIROL_UA700_UA25:
-		return create_ua700_ua25_quirk(chip, iface);
-	case QUIRK_AUDIO_EDIROL_UA1000:
-		return create_ua1000_quirk(chip, iface);
-	case QUIRK_IGNORE_INTERFACE:
-		return 0;
-	default:
+	typedef int (*quirk_func_t)(snd_usb_audio_t *, struct usb_interface *,
+				    const snd_usb_audio_quirk_t *);
+	static const quirk_func_t quirk_funcs[] = {
+		[QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
+		[QUIRK_COMPOSITE] = create_composite_quirk,
+		[QUIRK_MIDI_STANDARD_INTERFACE] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_FIXED_ENDPOINT] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_RAW] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_MIDITECH] = snd_usb_create_midi_interface,
+		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_interface_quirk,
+		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
+		[QUIRK_AUDIO_EDIROL_UA700_UA25] = create_ua700_ua25_quirk,
+		[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
+	};
+
+	if (quirk->type < QUIRK_TYPE_COUNT) {
+		return quirk_funcs[quirk->type](chip, iface, quirk);
+	} else {
 		snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
 		return -ENXIO;
 	}
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index aedb42a..ad9eab2 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -153,20 +153,24 @@
 #define QUIRK_NO_INTERFACE		-2
 #define QUIRK_ANY_INTERFACE		-1
 
-/* quirk type */
-#define QUIRK_MIDI_FIXED_ENDPOINT	0
-#define QUIRK_MIDI_YAMAHA		1
-#define QUIRK_MIDI_MIDIMAN		2
-#define QUIRK_COMPOSITE			3
-#define QUIRK_AUDIO_FIXED_ENDPOINT	4
-#define QUIRK_AUDIO_STANDARD_INTERFACE	5
-#define QUIRK_MIDI_STANDARD_INTERFACE	6
-#define QUIRK_AUDIO_EDIROL_UA700_UA25	7
-#define QUIRK_AUDIO_EDIROL_UA1000	8
-#define QUIRK_IGNORE_INTERFACE		9
-#define QUIRK_MIDI_NOVATION		10
-#define QUIRK_MIDI_MOTU			11
-#define QUIRK_MIDI_EMAGIC		12
+enum quirk_type {
+	QUIRK_IGNORE_INTERFACE,
+	QUIRK_COMPOSITE,
+	QUIRK_MIDI_STANDARD_INTERFACE,
+	QUIRK_MIDI_FIXED_ENDPOINT,
+	QUIRK_MIDI_YAMAHA,
+	QUIRK_MIDI_MIDIMAN,
+	QUIRK_MIDI_NOVATION,
+	QUIRK_MIDI_RAW,
+	QUIRK_MIDI_EMAGIC,
+	QUIRK_MIDI_MIDITECH,
+	QUIRK_AUDIO_STANDARD_INTERFACE,
+	QUIRK_AUDIO_FIXED_ENDPOINT,
+	QUIRK_AUDIO_EDIROL_UA700_UA25,
+	QUIRK_AUDIO_EDIROL_UA1000,
+
+	QUIRK_TYPE_COUNT
+};
 
 typedef struct snd_usb_audio_quirk snd_usb_audio_quirk_t;
 typedef struct snd_usb_midi_endpoint_info snd_usb_midi_endpoint_info_t;
@@ -175,7 +179,7 @@
 	const char *vendor_name;
 	const char *product_name;
 	int16_t ifnum;
-	int16_t type;
+	uint16_t type;
 	const void *data;
 };
 
@@ -205,11 +209,13 @@
 
 /* for QUIRK_IGNORE_INTERFACE, data is NULL */
 
-/* for QUIRK_MIDI_NOVATION and _MOTU, data is NULL */
+/* for QUIRK_MIDI_NOVATION and _RAW, data is NULL */
 
 /* for QUIRK_MIDI_EMAGIC, data points to a snd_usb_midi_endpoint_info
  * structure (out_cables and in_cables only) */
 
+/* for QUIRK_MIDI_MIDITECH, data is NULL */
+
 /*
  */
 
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index bee7006..5778a9b 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -524,16 +524,16 @@
 };
 
 /*
- * Mark of the Unicorn USB MIDI protocol: raw MIDI.
+ * "raw" protocol: used by the MOTU FastLane.
  */
 
-static void snd_usbmidi_motu_input(snd_usb_midi_in_endpoint_t* ep,
-				   uint8_t* buffer, int buffer_length)
+static void snd_usbmidi_raw_input(snd_usb_midi_in_endpoint_t* ep,
+				  uint8_t* buffer, int buffer_length)
 {
 	snd_usbmidi_input_data(ep, 0, buffer, buffer_length);
 }
 
-static void snd_usbmidi_motu_output(snd_usb_midi_out_endpoint_t* ep)
+static void snd_usbmidi_raw_output(snd_usb_midi_out_endpoint_t* ep)
 {
 	int count;
 
@@ -549,9 +549,9 @@
 	ep->urb->transfer_buffer_length = count;
 }
 
-static struct usb_protocol_ops snd_usbmidi_motu_ops = {
-	.input = snd_usbmidi_motu_input,
-	.output = snd_usbmidi_motu_output,
+static struct usb_protocol_ops snd_usbmidi_raw_ops = {
+	.input = snd_usbmidi_raw_input,
+	.output = snd_usbmidi_raw_output,
 };
 
 /*
@@ -1505,8 +1505,8 @@
 			umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
 			err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 			break;
-		case QUIRK_MIDI_MOTU:
-			umidi->usb_protocol_ops = &snd_usbmidi_motu_ops;
+		case QUIRK_MIDI_RAW:
+			umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
 			err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 			break;
 		case QUIRK_MIDI_EMAGIC:
@@ -1515,6 +1515,9 @@
 			       sizeof(snd_usb_midi_endpoint_info_t));
 			err = snd_usbmidi_detect_endpoints(umidi, &endpoints[0], 1);
 			break;
+		case QUIRK_MIDI_MIDITECH:
+			err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+			break;
 		default:
 			snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
 			err = -ENXIO;
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index f513564..f74e652 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -116,6 +116,7 @@
 YAMAHA_DEVICE(0x103a, NULL),
 YAMAHA_DEVICE(0x103b, NULL),
 YAMAHA_DEVICE(0x103c, NULL),
+YAMAHA_DEVICE(0x103d, NULL),
 YAMAHA_DEVICE(0x2000, "DGP-7"),
 YAMAHA_DEVICE(0x2001, "DGP-5"),
 YAMAHA_DEVICE(0x2002, NULL),
@@ -1259,7 +1260,12 @@
 /* Mark of the Unicorn devices */
 {
 	/* thanks to Robert A. Lerche <ral 'at' msbit.com> */
-	USB_DEVICE(0x07fd, 0x0001),
+	.match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+		       USB_DEVICE_ID_MATCH_PRODUCT |
+		       USB_DEVICE_ID_MATCH_DEV_SUBCLASS,
+	.idVendor = 0x07fd,
+	.idProduct = 0x0001,
+	.bDeviceSubClass = 2,
 	.driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
 		.vendor_name = "MOTU",
 		.product_name = "Fastlane",
@@ -1268,7 +1274,7 @@
 		.data = & (const snd_usb_audio_quirk_t[]) {
 			{
 				.ifnum = 0,
-				.type = QUIRK_MIDI_MOTU
+				.type = QUIRK_MIDI_RAW
 			},
 			{
 				.ifnum = 1,
@@ -1373,6 +1379,25 @@
 },
 
 {
+	USB_DEVICE(0x4752, 0x0011),
+	.driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
+		.vendor_name = "Miditech",
+		.product_name = "Midistart-2",
+		.ifnum = 0,
+		.type = QUIRK_MIDI_MIDITECH
+	}
+},
+{
+	USB_DEVICE(0x7104, 0x2202),
+	.driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
+		.vendor_name = "Miditech",
+		.product_name = "MidiStudio-2",
+		.ifnum = 0,
+		.type = QUIRK_MIDI_MIDITECH
+	}
+},
+
+{
 	/*
 	 * Some USB MIDI devices don't have an audio control interface,
 	 * so we have to grab MIDI streaming interfaces here.
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index bef9b0c..0281a36 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -232,8 +232,7 @@
 	if (err)
 		return err;
 	if (dsp->index == 1) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(HZ/4);			// give the device some time 
+		msleep(250);				// give the device some time
 		err = usX2Y_AsyncSeq04_init(priv);
 		if (err) {
 			snd_printk("usX2Y_AsyncSeq04_init error \n");
diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index bb2c8e9..ef280612 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -50,6 +50,7 @@
    Currently rawusb dma pcm buffer transport (this file) is only available to snd-usb-usx2y. 
 */
 
+#include <linux/delay.h>
 #include "usbusx2yaudio.c"
 
 #if defined(USX2Y_NRPACKS_VARIABLE) || (!defined(USX2Y_NRPACKS_VARIABLE) &&  USX2Y_NRPACKS == 1)
@@ -520,11 +521,8 @@
 		usX2Y->hwdep_pcm_shm->playback_iso_start = -1;
 		if (atomic_read(&subs->state) < state_PREPARED) {
 			while (usX2Y_iso_frames_per_buffer(runtime, usX2Y) > usX2Y->hwdep_pcm_shm->captured_iso_frames) {
-				signed long timeout;
 				snd_printd("Wait: iso_frames_per_buffer=%i,captured_iso_frames=%i\n", usX2Y_iso_frames_per_buffer(runtime, usX2Y), usX2Y->hwdep_pcm_shm->captured_iso_frames);
-				set_current_state(TASK_INTERRUPTIBLE);
-				timeout = schedule_timeout(HZ/100 + 1);
-				if (signal_pending(current)) {
+				if (msleep_interruptible(10)) {
 					err = -ERESTARTSYS;
 					goto up_prepare_mutex;
 				}