blob: 337161f440dd67aa473f616621933332955a842c [file] [log] [blame]
/* Intel(R) Gigabit Ethernet Linux driver
* Copyright(c) 2007-2014 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*/
/* e1000_i210
* e1000_i211
*/
#include <linux/types.h>
#include <linux/if_ether.h>
#include "e1000_hw.h"
#include "e1000_i210.h"
static s32 igb_update_flash_i210(struct e1000_hw *hw);
/**
* igb_get_hw_semaphore_i210 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
*/
static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
{
u32 swsm;
s32 timeout = hw->nvm.word_size + 1;
s32 i = 0;
/* Get the SW semaphore */
while (i < timeout) {
swsm = rd32(E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
udelay(50);
i++;
}
if (i == timeout) {
/* In rare circumstances, the SW semaphore may already be held
* unintentionally. Clear the semaphore once before giving up.
*/
if (hw->dev_spec._82575.clear_semaphore_once) {
hw->dev_spec._82575.clear_semaphore_once = false;
igb_put_hw_semaphore(hw);
for (i = 0; i < timeout; i++) {
swsm = rd32(E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
udelay(50);
}
}
/* If we do not have the semaphore here, we have to give up. */
if (i == timeout) {
hw_dbg("Driver can't access device - SMBI bit is set.\n");
return -E1000_ERR_NVM;
}
}
/* Get the FW semaphore. */
for (i = 0; i < timeout; i++) {
swsm = rd32(E1000_SWSM);
wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
/* Semaphore acquired if bit latched */
if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
break;
udelay(50);
}
if (i == timeout) {
/* Release semaphores */
igb_put_hw_semaphore(hw);
hw_dbg("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
return 0;
}
/**
* igb_acquire_nvm_i210 - Request for access to EEPROM
* @hw: pointer to the HW structure
*
* Acquire the necessary semaphores for exclusive access to the EEPROM.
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
* Return successful if access grant bit set, else clear the request for
* EEPROM access and return -E1000_ERR_NVM (-1).
**/
static s32 igb_acquire_nvm_i210(struct e1000_hw *hw)
{
return igb_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
}
/**
* igb_release_nvm_i210 - Release exclusive access to EEPROM
* @hw: pointer to the HW structure
*
* Stop any current commands to the EEPROM and clear the EEPROM request bit,
* then release the semaphores acquired.
**/
static void igb_release_nvm_i210(struct e1000_hw *hw)
{
igb_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
}
/**
* igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
* will also specify which port we're acquiring the lock for.
**/
s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
u32 swmask = mask;
u32 fwmask = mask << 16;
s32 ret_val = 0;
s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
while (i < timeout) {
if (igb_get_hw_semaphore_i210(hw)) {
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync = rd32(E1000_SW_FW_SYNC);
if (!(swfw_sync & (fwmask | swmask)))
break;
/* Firmware currently using resource (fwmask) */
igb_put_hw_semaphore(hw);
mdelay(5);
i++;
}
if (i == timeout) {
hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync |= swmask;
wr32(E1000_SW_FW_SYNC, swfw_sync);
igb_put_hw_semaphore(hw);
out:
return ret_val;
}
/**
* igb_release_swfw_sync_i210 - Release SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
* will also specify which port we're releasing the lock for.
**/
void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
while (igb_get_hw_semaphore_i210(hw))
; /* Empty */
swfw_sync = rd32(E1000_SW_FW_SYNC);
swfw_sync &= ~mask;
wr32(E1000_SW_FW_SYNC, swfw_sync);
igb_put_hw_semaphore(hw);
}
/**
* igb_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
* @hw: pointer to the HW structure
* @offset: offset of word in the Shadow Ram to read
* @words: number of words to read
* @data: word read from the Shadow Ram
*
* Reads a 16 bit word from the Shadow Ram using the EERD register.
* Uses necessary synchronization semaphores.
**/
static s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
u16 *data)
{
s32 status = 0;
u16 i, count;
/* We cannot hold synchronization semaphores for too long,
* because of forceful takeover procedure. However it is more efficient
* to read in bursts than synchronizing access for each word.
*/
for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
E1000_EERD_EEWR_MAX_COUNT : (words - i);
if (!(hw->nvm.ops.acquire(hw))) {
status = igb_read_nvm_eerd(hw, offset, count,
data + i);
hw->nvm.ops.release(hw);
} else {
status = E1000_ERR_SWFW_SYNC;
}
if (status)
break;
}
return status;
}
/**
* igb_write_nvm_srwr - Write to Shadow Ram using EEWR
* @hw: pointer to the HW structure
* @offset: offset within the Shadow Ram to be written to
* @words: number of words to write
* @data: 16 bit word(s) to be written to the Shadow Ram
*
* Writes data to Shadow Ram at offset using EEWR register.
*
* If igb_update_nvm_checksum is not called after this function , the
* Shadow Ram will most likely contain an invalid checksum.
**/
static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
u16 *data)
{
struct e1000_nvm_info *nvm = &hw->nvm;
u32 i, k, eewr = 0;
u32 attempts = 100000;
s32 ret_val = 0;
/* A check for invalid values: offset too large, too many words,
* too many words for the offset, and not enough words.
*/
if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
(words == 0)) {
hw_dbg("nvm parameter(s) out of bounds\n");
ret_val = -E1000_ERR_NVM;
goto out;
}
for (i = 0; i < words; i++) {
eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
(data[i] << E1000_NVM_RW_REG_DATA) |
E1000_NVM_RW_REG_START;
wr32(E1000_SRWR, eewr);
for (k = 0; k < attempts; k++) {
if (E1000_NVM_RW_REG_DONE &
rd32(E1000_SRWR)) {
ret_val = 0;
break;
}
udelay(5);
}
if (ret_val) {
hw_dbg("Shadow RAM write EEWR timed out\n");
break;
}
}
out:
return ret_val;
}
/**
* igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
* @hw: pointer to the HW structure
* @offset: offset within the Shadow RAM to be written to
* @words: number of words to write
* @data: 16 bit word(s) to be written to the Shadow RAM
*
* Writes data to Shadow RAM at offset using EEWR register.
*
* If e1000_update_nvm_checksum is not called after this function , the
* data will not be committed to FLASH and also Shadow RAM will most likely
* contain an invalid checksum.
*
* If error code is returned, data and Shadow RAM may be inconsistent - buffer
* partially written.
**/
static s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
u16 *data)
{
s32 status = 0;
u16 i, count;
/* We cannot hold synchronization semaphores for too long,
* because of forceful takeover procedure. However it is more efficient
* to write in bursts than synchronizing access for each word.
*/
for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
E1000_EERD_EEWR_MAX_COUNT : (words - i);
if (!(hw->nvm.ops.acquire(hw))) {
status = igb_write_nvm_srwr(hw, offset, count,
data + i);
hw->nvm.ops.release(hw);
} else {
status = E1000_ERR_SWFW_SYNC;
}
if (status)
break;
}
return status;
}
/**
* igb_read_invm_word_i210 - Reads OTP
* @hw: pointer to the HW structure
* @address: the word address (aka eeprom offset) to read
* @data: pointer to the data read
*
* Reads 16-bit words from the OTP. Return error when the word is not
* stored in OTP.
**/
static s32 igb_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data)
{
s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
u32 invm_dword;
u16 i;
u8 record_type, word_address;
for (i = 0; i < E1000_INVM_SIZE; i++) {
invm_dword = rd32(E1000_INVM_DATA_REG(i));
/* Get record type */
record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword);
if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE)
break;
if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE)
i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS;
if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE)
i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS;
if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) {
word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword);
if (word_address == address) {
*data = INVM_DWORD_TO_WORD_DATA(invm_dword);
hw_dbg("Read INVM Word 0x%02x = %x\n",
address, *data);
status = 0;
break;
}
}
}
if (status)
hw_dbg("Requested word 0x%02x not found in OTP\n", address);
return status;
}
/**
* igb_read_invm_i210 - Read invm wrapper function for I210/I211
* @hw: pointer to the HW structure
* @words: number of words to read
* @data: pointer to the data read
*
* Wrapper function to return data formerly found in the NVM.
**/
static s32 igb_read_invm_i210(struct e1000_hw *hw, u16 offset,
u16 words __always_unused, u16 *data)
{
s32 ret_val = 0;
/* Only the MAC addr is required to be present in the iNVM */
switch (offset) {
case NVM_MAC_ADDR:
ret_val = igb_read_invm_word_i210(hw, (u8)offset, &data[0]);
ret_val |= igb_read_invm_word_i210(hw, (u8)offset+1,
&data[1]);
ret_val |= igb_read_invm_word_i210(hw, (u8)offset+2,
&data[2]);
if (ret_val)
hw_dbg("MAC Addr not found in iNVM\n");
break;
case NVM_INIT_CTRL_2:
ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
if (ret_val) {
*data = NVM_INIT_CTRL_2_DEFAULT_I211;
ret_val = 0;
}
break;
case NVM_INIT_CTRL_4:
ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
if (ret_val) {
*data = NVM_INIT_CTRL_4_DEFAULT_I211;
ret_val = 0;
}
break;
case NVM_LED_1_CFG:
ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
if (ret_val) {
*data = NVM_LED_1_CFG_DEFAULT_I211;
ret_val = 0;
}
break;
case NVM_LED_0_2_CFG:
ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
if (ret_val) {
*data = NVM_LED_0_2_CFG_DEFAULT_I211;
ret_val = 0;
}
break;
case NVM_ID_LED_SETTINGS:
ret_val = igb_read_invm_word_i210(hw, (u8)offset, data);
if (ret_val) {
*data = ID_LED_RESERVED_FFFF;
ret_val = 0;
}
break;
case NVM_SUB_DEV_ID:
*data = hw->subsystem_device_id;
break;
case NVM_SUB_VEN_ID:
*data = hw->subsystem_vendor_id;
break;
case NVM_DEV_ID:
*data = hw->device_id;
break;
case NVM_VEN_ID:
*data = hw->vendor_id;
break;
default:
hw_dbg("NVM word 0x%02x is not mapped.\n", offset);
*data = NVM_RESERVED_WORD;
break;
}
return ret_val;
}
/**
* igb_read_invm_version - Reads iNVM version and image type
* @hw: pointer to the HW structure
* @invm_ver: version structure for the version read
*
* Reads iNVM version and image type.
**/
s32 igb_read_invm_version(struct e1000_hw *hw,
struct e1000_fw_version *invm_ver) {
u32 *record = NULL;
u32 *next_record = NULL;
u32 i = 0;
u32 invm_dword = 0;
u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE /
E1000_INVM_RECORD_SIZE_IN_BYTES);
u32 buffer[E1000_INVM_SIZE];
s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
u16 version = 0;
/* Read iNVM memory */
for (i = 0; i < E1000_INVM_SIZE; i++) {
invm_dword = rd32(E1000_INVM_DATA_REG(i));
buffer[i] = invm_dword;
}
/* Read version number */
for (i = 1; i < invm_blocks; i++) {
record = &buffer[invm_blocks - i];
next_record = &buffer[invm_blocks - i + 1];
/* Check if we have first version location used */
if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) {
version = 0;
status = 0;
break;
}
/* Check if we have second version location used */
else if ((i == 1) &&
((*record & E1000_INVM_VER_FIELD_TWO) == 0)) {
version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
status = 0;
break;
}
/* Check if we have odd version location
* used and it is the last one used
*/
else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) &&
((*record & 0x3) == 0)) || (((*record & 0x3) != 0) &&
(i != 1))) {
version = (*next_record & E1000_INVM_VER_FIELD_TWO)
>> 13;
status = 0;
break;
}
/* Check if we have even version location
* used and it is the last one used
*/
else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) &&
((*record & 0x3) == 0)) {
version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
status = 0;
break;
}
}
if (!status) {
invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK)
>> E1000_INVM_MAJOR_SHIFT;
invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK;
}
/* Read Image Type */
for (i = 1; i < invm_blocks; i++) {
record = &buffer[invm_blocks - i];
next_record = &buffer[invm_blocks - i + 1];
/* Check if we have image type in first location used */
if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) {
invm_ver->invm_img_type = 0;
status = 0;
break;
}
/* Check if we have image type in first location used */
else if ((((*record & 0x3) == 0) &&
((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) ||
((((*record & 0x3) != 0) && (i != 1)))) {
invm_ver->invm_img_type =
(*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23;
status = 0;
break;
}
}
return status;
}
/**
* igb_validate_nvm_checksum_i210 - Validate EEPROM checksum
* @hw: pointer to the HW structure
*
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
* and then verifies that the sum of the EEPROM is equal to 0xBABA.
**/
static s32 igb_validate_nvm_checksum_i210(struct e1000_hw *hw)
{
s32 status = 0;
s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
if (!(hw->nvm.ops.acquire(hw))) {
/* Replace the read function with semaphore grabbing with
* the one that skips this for a while.
* We have semaphore taken already here.
*/
read_op_ptr = hw->nvm.ops.read;
hw->nvm.ops.read = igb_read_nvm_eerd;
status = igb_validate_nvm_checksum(hw);
/* Revert original read operation. */
hw->nvm.ops.read = read_op_ptr;
hw->nvm.ops.release(hw);
} else {
status = E1000_ERR_SWFW_SYNC;
}
return status;
}
/**
* igb_update_nvm_checksum_i210 - Update EEPROM checksum
* @hw: pointer to the HW structure
*
* Updates the EEPROM checksum by reading/adding each word of the EEPROM
* up to the checksum. Then calculates the EEPROM checksum and writes the
* value to the EEPROM. Next commit EEPROM data onto the Flash.
**/
static s32 igb_update_nvm_checksum_i210(struct e1000_hw *hw)
{
s32 ret_val = 0;
u16 checksum = 0;
u16 i, nvm_data;
/* Read the first word from the EEPROM. If this times out or fails, do
* not continue or we could be in for a very long wait while every
* EEPROM read fails
*/
ret_val = igb_read_nvm_eerd(hw, 0, 1, &nvm_data);
if (ret_val) {
hw_dbg("EEPROM read failed\n");
goto out;
}
if (!(hw->nvm.ops.acquire(hw))) {
/* Do not use hw->nvm.ops.write, hw->nvm.ops.read
* because we do not want to take the synchronization
* semaphores twice here.
*/
for (i = 0; i < NVM_CHECKSUM_REG; i++) {
ret_val = igb_read_nvm_eerd(hw, i, 1, &nvm_data);
if (ret_val) {
hw->nvm.ops.release(hw);
hw_dbg("NVM Read Error while updating checksum.\n");
goto out;
}
checksum += nvm_data;
}
checksum = (u16) NVM_SUM - checksum;
ret_val = igb_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
&checksum);
if (ret_val) {
hw->nvm.ops.release(hw);
hw_dbg("NVM Write Error while updating checksum.\n");
goto out;
}
hw->nvm.ops.release(hw);
ret_val = igb_update_flash_i210(hw);
} else {
ret_val = -E1000_ERR_SWFW_SYNC;
}
out:
return ret_val;
}
/**
* igb_pool_flash_update_done_i210 - Pool FLUDONE status.
* @hw: pointer to the HW structure
*
**/
static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
{
s32 ret_val = -E1000_ERR_NVM;
u32 i, reg;
for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
reg = rd32(E1000_EECD);
if (reg & E1000_EECD_FLUDONE_I210) {
ret_val = 0;
break;
}
udelay(5);
}
return ret_val;
}
/**
* igb_get_flash_presence_i210 - Check if flash device is detected.
* @hw: pointer to the HW structure
*
**/
bool igb_get_flash_presence_i210(struct e1000_hw *hw)
{
u32 eec = 0;
bool ret_val = false;
eec = rd32(E1000_EECD);
if (eec & E1000_EECD_FLASH_DETECTED_I210)
ret_val = true;
return ret_val;
}
/**
* igb_update_flash_i210 - Commit EEPROM to the flash
* @hw: pointer to the HW structure
*
**/
static s32 igb_update_flash_i210(struct e1000_hw *hw)
{
s32 ret_val = 0;
u32 flup;
ret_val = igb_pool_flash_update_done_i210(hw);
if (ret_val == -E1000_ERR_NVM) {
hw_dbg("Flash update time out\n");
goto out;
}
flup = rd32(E1000_EECD) | E1000_EECD_FLUPD_I210;
wr32(E1000_EECD, flup);
ret_val = igb_pool_flash_update_done_i210(hw);
if (ret_val)
hw_dbg("Flash update complete\n");
else
hw_dbg("Flash update time out\n");
out:
return ret_val;
}
/**
* igb_valid_led_default_i210 - Verify a valid default LED config
* @hw: pointer to the HW structure
* @data: pointer to the NVM (EEPROM)
*
* Read the EEPROM for the current default LED configuration. If the
* LED configuration is not valid, set to a valid LED configuration.
**/
s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data)
{
s32 ret_val;
ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
if (ret_val) {
hw_dbg("NVM Read Error\n");
goto out;
}
if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
switch (hw->phy.media_type) {
case e1000_media_type_internal_serdes:
*data = ID_LED_DEFAULT_I210_SERDES;
break;
case e1000_media_type_copper:
default:
*data = ID_LED_DEFAULT_I210;
break;
}
}
out:
return ret_val;
}
/**
* __igb_access_xmdio_reg - Read/write XMDIO register
* @hw: pointer to the HW structure
* @address: XMDIO address to program
* @dev_addr: device address to program
* @data: pointer to value to read/write from/to the XMDIO address
* @read: boolean flag to indicate read or write
**/
static s32 __igb_access_xmdio_reg(struct e1000_hw *hw, u16 address,
u8 dev_addr, u16 *data, bool read)
{
s32 ret_val = 0;
ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
if (ret_val)
return ret_val;
ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
if (ret_val)
return ret_val;
ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
dev_addr);
if (ret_val)
return ret_val;
if (read)
ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
else
ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
if (ret_val)
return ret_val;
/* Recalibrate the device back to 0 */
ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
if (ret_val)
return ret_val;
return ret_val;
}
/**
* igb_read_xmdio_reg - Read XMDIO register
* @hw: pointer to the HW structure
* @addr: XMDIO address to program
* @dev_addr: device address to program
* @data: value to be read from the EMI address
**/
s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
{
return __igb_access_xmdio_reg(hw, addr, dev_addr, data, true);
}
/**
* igb_write_xmdio_reg - Write XMDIO register
* @hw: pointer to the HW structure
* @addr: XMDIO address to program
* @dev_addr: device address to program
* @data: value to be written to the XMDIO address
**/
s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
{
return __igb_access_xmdio_reg(hw, addr, dev_addr, &data, false);
}
/**
* igb_init_nvm_params_i210 - Init NVM func ptrs.
* @hw: pointer to the HW structure
**/
s32 igb_init_nvm_params_i210(struct e1000_hw *hw)
{
s32 ret_val = 0;
struct e1000_nvm_info *nvm = &hw->nvm;
nvm->ops.acquire = igb_acquire_nvm_i210;
nvm->ops.release = igb_release_nvm_i210;
nvm->ops.valid_led_default = igb_valid_led_default_i210;
/* NVM Function Pointers */
if (igb_get_flash_presence_i210(hw)) {
hw->nvm.type = e1000_nvm_flash_hw;
nvm->ops.read = igb_read_nvm_srrd_i210;
nvm->ops.write = igb_write_nvm_srwr_i210;
nvm->ops.validate = igb_validate_nvm_checksum_i210;
nvm->ops.update = igb_update_nvm_checksum_i210;
} else {
hw->nvm.type = e1000_nvm_invm;
nvm->ops.read = igb_read_invm_i210;
nvm->ops.write = NULL;
nvm->ops.validate = NULL;
nvm->ops.update = NULL;
}
return ret_val;
}