diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
new file mode 100644
index 0000000..b1bfaf1
--- /dev/null
+++ b/include/net/ieee80211.h
@@ -0,0 +1,887 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+#ifndef IEEE80211_H
+#define IEEE80211_H
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h>   /* ARRAY_SIZE */
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID   0x10
+#define IW_QUAL_LEVEL_INVALID  0x20
+#define IW_QUAL_NOISE_INVALID  0x40
+#define IW_QUAL_QUAL_UPDATED   0x1
+#define IW_QUAL_LEVEL_UPDATED  0x2
+#define IW_QUAL_NOISE_UPDATED  0x4
+#endif
+
+#define IEEE80211_DATA_LEN		2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   The figure in section 7.1.2 suggests a body size of up to 2312
+   bytes is allowed, which is a bit confusing, I suspect this
+   represents the 2304 bytes of real data, plus a possible 8 bytes of
+   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE80211_HLEN			30
+#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct ieee80211_hdr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+} __attribute__ ((packed));
+
+enum eap_type {
+	EAP_PACKET = 0,
+	EAPOL_START,
+	EAPOL_LOGOFF,
+	EAPOL_KEY,
+	EAPOL_ENCAP_ASF_ALERT
+};
+
+static const char *eap_types[] = {
+	[EAP_PACKET]		= "EAP-Packet",
+	[EAPOL_START]		= "EAPOL-Start",
+	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
+	[EAPOL_KEY]		= "EAPOL-Key",
+	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
+};
+
+static inline const char *eap_get_type(int type)
+{
+	return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
+}
+
+struct eapol {
+	u8 snap[6];
+	u16 ethertype;
+	u8 version;
+	u8 type;
+	u16 length;
+} __attribute__ ((packed));
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN    4
+
+#define MIN_FRAG_THRESHOLD     256U
+#define	MAX_FRAG_THRESHOLD     2346U
+
+/* Frame control field constants */
+#define IEEE80211_FCTL_VERS		0x0002
+#define IEEE80211_FCTL_FTYPE		0x000c
+#define IEEE80211_FCTL_STYPE		0x00f0
+#define IEEE80211_FCTL_TODS		0x0100
+#define IEEE80211_FCTL_FROMDS		0x0200
+#define IEEE80211_FCTL_MOREFRAGS	0x0400
+#define IEEE80211_FCTL_RETRY		0x0800
+#define IEEE80211_FCTL_PM		0x1000
+#define IEEE80211_FCTL_MOREDATA	0x2000
+#define IEEE80211_FCTL_WEP		0x4000
+#define IEEE80211_FCTL_ORDER		0x8000
+
+#define IEEE80211_FTYPE_MGMT		0x0000
+#define IEEE80211_FTYPE_CTL		0x0004
+#define IEEE80211_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
+#define IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define IEEE80211_STYPE_PROBE_REQ	0x0040
+#define IEEE80211_STYPE_PROBE_RESP	0x0050
+#define IEEE80211_STYPE_BEACON		0x0080
+#define IEEE80211_STYPE_ATIM		0x0090
+#define IEEE80211_STYPE_DISASSOC	0x00A0
+#define IEEE80211_STYPE_AUTH		0x00B0
+#define IEEE80211_STYPE_DEAUTH		0x00C0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL		0x00A0
+#define IEEE80211_STYPE_RTS		0x00B0
+#define IEEE80211_STYPE_CTS		0x00C0
+#define IEEE80211_STYPE_ACK		0x00D0
+#define IEEE80211_STYPE_CFEND		0x00E0
+#define IEEE80211_STYPE_CFENDACK	0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA		0x0000
+#define IEEE80211_STYPE_DATA_CFACK	0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
+#define IEEE80211_STYPE_NULLFUNC	0x0040
+#define IEEE80211_STYPE_CFACK		0x0050
+#define IEEE80211_STYPE_CFPOLL		0x0060
+#define IEEE80211_STYPE_CFACKPOLL	0x0070
+
+#define IEEE80211_SCTL_FRAG		0x000F
+#define IEEE80211_SCTL_SEQ		0xFFF0
+
+
+/* debug macros */
+
+#ifdef CONFIG_IEEE80211_DEBUG
+extern u32 ieee80211_debug_level;
+#define IEEE80211_DEBUG(level, fmt, args...) \
+do { if (ieee80211_debug_level & (level)) \
+  printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
+         in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+#else
+#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+#endif	/* CONFIG_IEEE80211_DEBUG */
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IEEE80211_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry.  xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
+ * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IEEE80211_DL_INFO          (1<<0)
+#define IEEE80211_DL_WX            (1<<1)
+#define IEEE80211_DL_SCAN          (1<<2)
+#define IEEE80211_DL_STATE         (1<<3)
+#define IEEE80211_DL_MGMT          (1<<4)
+#define IEEE80211_DL_FRAG          (1<<5)
+#define IEEE80211_DL_EAP           (1<<6)
+#define IEEE80211_DL_DROP          (1<<7)
+
+#define IEEE80211_DL_TX            (1<<8)
+#define IEEE80211_DL_RX            (1<<9)
+
+#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
+
+#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
+#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
+#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
+#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
+#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
+#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
+#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
+#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
+#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY		// enable iwspy support
+#endif
+#include <net/iw_handler.h>	// new driver API
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+
+        u8    dsap;   /* always 0xAA */
+        u8    ssap;   /* always 0xAA */
+        u8    ctrl;   /* always 0x03 */
+        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+#define WLAN_EID_RSN 48
+#define WLAN_EID_GENERIC 221
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+
+#define IEEE80211_CCK_MODULATION    (1<<0)
+#define IEEE80211_OFDM_MODULATION   (1<<1)
+
+#define IEEE80211_24GHZ_BAND     (1<<0)
+#define IEEE80211_52GHZ_BAND     (1<<1)
+
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	        0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
+        IEEE80211_CCK_RATE_5MB_MASK | \
+        IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+                                IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES	    8
+#define IEEE80211_NUM_CCK_RATES	            4
+#define IEEE80211_OFDM_SHIFT_MASK_A         4
+
+
+
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ *       information for frames received.  Not setting these will not cause
+ *       any adverse affects. */
+struct ieee80211_rx_stats {
+	u32 mac_time;
+	s8 rssi;
+	u8 signal;
+	u8 noise;
+	u16 rate; /* in 100 kbps */
+	u8 received_channel;
+	u8 control;
+	u8 mask;
+	u8 freq;
+	u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+	unsigned long first_frag_time;
+	unsigned int seq;
+	unsigned int last_frag;
+	struct sk_buff *skb;
+	u8 src_addr[ETH_ALEN];
+	u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+	unsigned int tx_unicast_frames;
+	unsigned int tx_multicast_frames;
+	unsigned int tx_fragments;
+	unsigned int tx_unicast_octets;
+	unsigned int tx_multicast_octets;
+	unsigned int tx_deferred_transmissions;
+	unsigned int tx_single_retry_frames;
+	unsigned int tx_multiple_retry_frames;
+	unsigned int tx_retry_limit_exceeded;
+	unsigned int tx_discards;
+	unsigned int rx_unicast_frames;
+	unsigned int rx_multicast_frames;
+	unsigned int rx_fragments;
+	unsigned int rx_unicast_octets;
+	unsigned int rx_multicast_octets;
+	unsigned int rx_fcs_errors;
+	unsigned int rx_discards_no_buffer;
+	unsigned int tx_discards_wrong_sa;
+	unsigned int rx_discards_undecryptable;
+	unsigned int rx_message_in_msg_fragments;
+	unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_device;
+
+#include "ieee80211_crypt.h"
+
+#define SEC_KEY_1         (1<<0)
+#define SEC_KEY_2         (1<<1)
+#define SEC_KEY_3         (1<<2)
+#define SEC_KEY_4         (1<<3)
+#define SEC_ACTIVE_KEY    (1<<4)
+#define SEC_AUTH_MODE     (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL         (1<<7)
+#define SEC_ENABLED       (1<<8)
+
+#define SEC_LEVEL_0      0 /* None */
+#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+	u16 active_key:2,
+            enabled:1,
+	    auth_mode:2,
+            auth_algo:4,
+            unicast_uses_group:1;
+	u8 key_sizes[WEP_KEYS];
+	u8 keys[WEP_KEYS][WEP_KEY_LEN];
+	u8 level;
+	u16 flags;
+} __attribute__ ((packed));
+
+
+/*
+
+ 802.11 data frame from AP
+
+      ,-------------------------------------------------------------------.
+Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+      |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+      |      | tion | (BSSID) |         |         | ence |  data   |      |
+      `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID       0
+#define MFIE_TYPE_RATES      1
+#define MFIE_TYPE_FH_SET     2
+#define MFIE_TYPE_DS_SET     3
+#define MFIE_TYPE_CF_SET     4
+#define MFIE_TYPE_TIM        5
+#define MFIE_TYPE_IBSS_SET   6
+#define MFIE_TYPE_CHALLENGE  16
+#define MFIE_TYPE_RSN	     48
+#define MFIE_TYPE_RATES_EX   50
+#define MFIE_TYPE_GENERIC    221
+
+struct ieee80211_info_element_hdr {
+	u8 id;
+	u8 len;
+} __attribute__ ((packed));
+
+struct ieee80211_info_element {
+	u8 id;
+	u8 len;
+	u8 data[0];
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+	u16 auth_algorithm;
+	u16 auth_sequence;
+	u16 beacon_interval;
+	u16 capability;
+	u8 current_ap[ETH_ALEN];
+	u16 listen_interval;
+	struct {
+		u16 association_id:14, reserved:2;
+	} __attribute__ ((packed));
+	u32 time_stamp[2];
+	u16 reason;
+	u16 status;
+*/
+
+struct ieee80211_authentication {
+	struct ieee80211_header_data header;
+	u16 algorithm;
+	u16 transaction;
+	u16 status;
+	struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+
+struct ieee80211_probe_response {
+	struct ieee80211_header_data header;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 capability;
+	struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_request_frame {
+	u16 capability;
+	u16 listen_interval;
+	u8 current_ap[ETH_ALEN];
+	struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_response_frame {
+	struct ieee80211_hdr_3addr header;
+	u16 capability;
+	u16 status;
+	u16 aid;
+	struct ieee80211_info_element info_element; /* supported rates */
+} __attribute__ ((packed));
+
+
+struct ieee80211_txb {
+	u8 nr_frags;
+	u8 encrypted;
+	u16 reserved;
+	u16 frag_size;
+	u16 payload_size;
+	struct sk_buff *fragments[0];
+};
+
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES		  42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
+/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates.  Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH                  ((u8)12)
+#define MAX_RATES_EX_LENGTH               ((u8)16)
+#define MAX_NETWORK_COUNT                  128
+
+#define CRC_LENGTH                 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM    (1<<1)
+#define NETWORK_HAS_CCK     (1<<2)
+
+struct ieee80211_network {
+	/* These entries are used to identify a unique network */
+	u8 bssid[ETH_ALEN];
+	u8 channel;
+	/* Ensure null-terminated for any debug msgs */
+	u8 ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 ssid_len;
+
+	/* These are network statistics */
+	struct ieee80211_rx_stats stats;
+	u16 capability;
+	u8 rates[MAX_RATES_LENGTH];
+	u8 rates_len;
+	u8 rates_ex[MAX_RATES_EX_LENGTH];
+	u8 rates_ex_len;
+	unsigned long last_scanned;
+	u8 mode;
+	u8 flags;
+	u32 last_associate;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 listen_interval;
+	u16 atim_window;
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8 rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
+	struct list_head list;
+};
+
+enum ieee80211_state {
+	IEEE80211_UNINITIALIZED = 0,
+	IEEE80211_INITIALIZED,
+	IEEE80211_ASSOCIATING,
+	IEEE80211_ASSOCIATED,
+	IEEE80211_AUTHENTICATING,
+	IEEE80211_AUTHENTICATED,
+	IEEE80211_SHUTDOWN
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+
+
+extern inline int is_multicast_ether_addr(const u8 *addr)
+{
+	return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+
+extern inline int is_broadcast_ether_addr(const u8 *addr)
+{
+	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct ieee80211_device {
+	struct net_device *dev;
+
+	/* Bookkeeping structures */
+	struct net_device_stats stats;
+	struct ieee80211_stats ieee_stats;
+
+	/* Probe / Beacon management */
+	struct list_head network_free_list;
+	struct list_head network_list;
+	struct ieee80211_network *networks;
+	int scans;
+	int scan_age;
+
+	int iw_mode; /* operating mode (IW_MODE_*) */
+
+	spinlock_t lock;
+
+	int tx_headroom; /* Set to size of any additional room needed at front
+			  * of allocated Tx SKBs */
+	u32 config;
+
+	/* WEP and other encryption related settings at the device level */
+	int open_wep; /* Set to 1 to allow unencrypted frames */
+
+	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+				 * WEP key changes */
+
+	/* If the host performs {en,de}cryption, then set to 1 */
+	int host_encrypt;
+	int host_decrypt;
+	int ieee802_1x; /* is IEEE 802.1X used */
+
+	/* WPA data */
+	int wpa_enabled;
+	int drop_unencrypted;
+	int tkip_countermeasures;
+	int privacy_invoked;
+	size_t wpa_ie_len;
+	u8 *wpa_ie;
+
+	struct list_head crypt_deinit_list;
+	struct ieee80211_crypt_data *crypt[WEP_KEYS];
+	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+	struct timer_list crypt_deinit_timer;
+
+	int bcrx_sta_key; /* use individual keys to override default keys even
+			   * with RX of broad/multicast frames */
+
+	/* Fragmentation structures */
+	struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
+	unsigned int frag_next_idx;
+	u16 fts; /* Fragmentation Threshold */
+
+	/* Association info */
+	u8 bssid[ETH_ALEN];
+
+	enum ieee80211_state state;
+
+	int mode;       /* A, B, G */
+	int modulation; /* CCK, OFDM */
+	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
+	int abg_ture;   /* ABG flag              */
+
+	/* Callback functions */
+	void (*set_security)(struct net_device *dev,
+			     struct ieee80211_security *sec);
+	int (*hard_start_xmit)(struct ieee80211_txb *txb,
+			       struct net_device *dev);
+	int (*reset_port)(struct net_device *dev);
+
+	/* This must be the last item so that it points to the data
+	 * allocated beyond this structure by alloc_ieee80211 */
+	u8 priv[0];
+};
+
+#define IEEE_A            (1<<0)
+#define IEEE_B            (1<<1)
+#define IEEE_G            (1<<2)
+#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+
+extern inline void *ieee80211_priv(struct net_device *dev)
+{
+	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
+}
+
+extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+{
+	/* Single white space is for Linksys APs */
+	if (essid_len == 1 && essid[0] == ' ')
+		return 1;
+
+	/* Otherwise, if the entire essid is 0, we assume it is hidden */
+	while (essid_len) {
+		essid_len--;
+		if (essid[essid_len] != '\0')
+			return 0;
+	}
+
+	return 1;
+}
+
+extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+{
+	/*
+	 * It is possible for both access points and our device to support
+	 * combinations of modes, so as long as there is one valid combination
+	 * of ap/device supported modes, then return success
+	 *
+	 */
+	if ((mode & IEEE_A) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_G) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_B) &&
+	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	return 0;
+}
+
+extern inline int ieee80211_get_hdrlen(u16 fc)
+{
+	int hdrlen = 24;
+
+	switch (WLAN_FC_GET_TYPE(fc)) {
+	case IEEE80211_FTYPE_DATA:
+		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+			hdrlen = 30; /* Addr4 */
+		break;
+	case IEEE80211_FTYPE_CTL:
+		switch (WLAN_FC_GET_STYPE(fc)) {
+		case IEEE80211_STYPE_CTS:
+		case IEEE80211_STYPE_ACK:
+			hdrlen = 10;
+			break;
+		default:
+			hdrlen = 16;
+			break;
+		}
+		break;
+	}
+
+	return hdrlen;
+}
+
+
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
+
+extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
+
+/* ieee80211_tx.c */
+
+
+extern int ieee80211_xmit(struct sk_buff *skb,
+			  struct net_device *dev);
+extern void ieee80211_txb_free(struct ieee80211_txb *);
+
+
+/* ieee80211_rx.c */
+extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats);
+extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+			     struct ieee80211_hdr *header,
+			     struct ieee80211_rx_stats *stats);
+
+/* iee80211_wx.c */
+extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+
+
+extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+{
+	ieee->scans++;
+}
+
+extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+{
+	return ieee->scans;
+}
+
+static inline const char *escape_essid(const char *essid, u8 essid_len) {
+	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+	const char *s = essid;
+	char *d = escaped;
+
+	if (ieee80211_is_empty_essid(essid, essid_len)) {
+		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+		return escaped;
+	}
+
+	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
+	while (essid_len--) {
+		if (*s == '\0') {
+			*d++ = '\\';
+			*d++ = '0';
+			s++;
+		} else {
+			*d++ = *s++;
+		}
+	}
+	*d = '\0';
+	return escaped;
+}
+#endif /* IEEE80211_H */
diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h
new file mode 100644
index 0000000..b58a3bc
--- /dev/null
+++ b/include/net/ieee80211_crypt.h
@@ -0,0 +1,86 @@
+/*
+ * Original code based on Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ *
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+/*
+ * This file defines the interface to the ieee80211 crypto module.
+ */
+#ifndef IEEE80211_CRYPT_H
+#define IEEE80211_CRYPT_H
+
+#include <linux/skbuff.h>
+
+struct ieee80211_crypto_ops {
+	const char *name;
+
+	/* init new crypto context (e.g., allocate private data space,
+	 * select IV, etc.); returns NULL on failure or pointer to allocated
+	 * private data on success */
+	void * (*init)(int keyidx);
+
+	/* deinitialize crypto context and free allocated private data */
+	void (*deinit)(void *priv);
+
+	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+	 * value from decrypt_mpdu is passed as the keyidx value for
+	 * decrypt_msdu. skb must have enough head and tail room for the
+	 * encryption; if not, error will be returned; these functions are
+	 * called for all MPDUs (i.e., fragments).
+	 */
+	int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+	int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+
+	/* These functions are called for full MSDUs, i.e. full frames.
+	 * These can be NULL if full MSDU operations are not needed. */
+	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
+	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
+			    void *priv);
+
+	int (*set_key)(void *key, int len, u8 *seq, void *priv);
+	int (*get_key)(void *key, int len, u8 *seq, void *priv);
+
+	/* procfs handler for printing out key information and possible
+	 * statistics */
+	char * (*print_stats)(char *p, void *priv);
+
+	/* maximum number of bytes added by encryption; encrypt buf is
+	 * allocated with extra_prefix_len bytes, copy of in_buf, and
+	 * extra_postfix_len; encrypt need not use all this space, but
+	 * the result must start at the beginning of the buffer and correct
+	 * length must be returned */
+	int extra_prefix_len, extra_postfix_len;
+
+	struct module *owner;
+};
+
+struct ieee80211_crypt_data {
+	struct list_head list; /* delayed deletion list */
+	struct ieee80211_crypto_ops *ops;
+	void *priv;
+	atomic_t refcnt;
+};
+
+int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
+int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
+struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name);
+void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
+void ieee80211_crypt_deinit_handler(unsigned long);
+void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
+				    struct ieee80211_crypt_data **crypt);
+
+#endif