Merge 3.14-rc3 into char-misc-next
We need the fixes here for future mei and other patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 0f9c6ff..8d96ebf 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -14,7 +14,7 @@
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
- tracepoint.xml drm.xml media_api.xml
+ tracepoint.xml drm.xml media_api.xml w1.xml
include $(srctree)/Documentation/DocBook/media/Makefile
diff --git a/Documentation/DocBook/w1.tmpl b/Documentation/DocBook/w1.tmpl
new file mode 100644
index 0000000..b0228d4
--- /dev/null
+++ b/Documentation/DocBook/w1.tmpl
@@ -0,0 +1,101 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="w1id">
+ <bookinfo>
+ <title>W1: Dallas' 1-wire bus</title>
+
+ <authorgroup>
+ <author>
+ <firstname>David</firstname>
+ <surname>Fries</surname>
+ <affiliation>
+ <address>
+ <email>David@Fries.net</email>
+ </address>
+ </affiliation>
+ </author>
+
+ </authorgroup>
+
+ <copyright>
+ <year>2013</year>
+ <!--
+ <holder></holder>
+ -->
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ For more details see the file COPYING in the source
+ distribution of Linux.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+
+ <chapter id="w1_internal">
+ <title>W1 API internal to the kernel</title>
+
+ <sect1 id="w1_internal_api">
+ <title>W1 API internal to the kernel</title>
+ <sect2 id="w1.h">
+ <title>drivers/w1/w1.h</title>
+ <para>W1 core functions.</para>
+!Idrivers/w1/w1.h
+ </sect2>
+
+ <sect2 id="w1.c">
+ <title>drivers/w1/w1.c</title>
+ <para>W1 core functions.</para>
+!Idrivers/w1/w1.c
+ </sect2>
+
+ <sect2 id="w1_family.h">
+ <title>drivers/w1/w1_family.h</title>
+ <para>Allows registering device family operations.</para>
+!Idrivers/w1/w1_family.h
+ </sect2>
+
+ <sect2 id="w1_family.c">
+ <title>drivers/w1/w1_family.c</title>
+ <para>Allows registering device family operations.</para>
+!Edrivers/w1/w1_family.c
+ </sect2>
+
+ <sect2 id="w1_int.c">
+ <title>drivers/w1/w1_int.c</title>
+ <para>W1 internal initialization for master devices.</para>
+!Edrivers/w1/w1_int.c
+ </sect2>
+
+ <sect2 id="w1_netlink.h">
+ <title>drivers/w1/w1_netlink.h</title>
+ <para>W1 external netlink API structures and commands.</para>
+!Idrivers/w1/w1_netlink.h
+ </sect2>
+
+ <sect2 id="w1_io.c">
+ <title>drivers/w1/w1_io.c</title>
+ <para>W1 input/output.</para>
+!Edrivers/w1/w1_io.c
+!Idrivers/w1/w1_io.c
+ </sect2>
+
+ </sect1>
+
+
+ </chapter>
+
+</book>
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index adcca03..d12cc94 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -145,7 +145,7 @@
memcpy(m + 1, data, m->len);
- cn_netlink_send(m, 0, GFP_ATOMIC);
+ cn_netlink_send(m, 0, 0, GFP_ATOMIC);
kfree(m);
}
diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
index 68ba372..fabdf64 100644
--- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
@@ -1,12 +1,12 @@
Allwinner sunxi-sid
Required properties:
-- compatible: "allwinner,sun4i-sid" or "allwinner,sun7i-a20-sid".
+- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
- reg: Should contain registers location and length
Example for sun4i:
sid@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>
};
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
new file mode 100644
index 0000000..715d099
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -0,0 +1,61 @@
+Qualcomm SPMI Controller (PMIC Arbiter)
+
+The SPMI PMIC Arbiter is found on the Snapdragon 800 Series. It is an SPMI
+controller with wrapping arbitration logic to allow for multiple on-chip
+devices to control a single SPMI master.
+
+The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+to slave devices.
+
+See spmi.txt for the generic SPMI controller binding requirements for child
+nodes.
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+generic interrupt controller binding documentation.
+
+Required properties:
+- compatible : should be "qcom,spmi-pmic-arb".
+- reg-names : must contain:
+ "core" - core registers
+ "intr" - interrupt controller registers
+ "cnfg" - configuration registers
+- reg : address + size pairs describing the PMIC arb register sets; order must
+ correspond with the order of entries in reg-names
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+- qcom,ee : indicates the active Execution Environment identifier (0-5)
+- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
+- interrupts : interrupt list for the PMIC Arb controller, must contain a
+ single interrupt entry for the peripheral interrupt
+- interrupt-names : corresponding interrupt names for the interrupts
+ listed in the 'interrupts' property, must contain:
+ "periph_irq" - summary interrupt for PMIC peripherals
+- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
+- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple:
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information, as defined in
+ dt-bindings/interrupt-controller/irq.h
+
+Example:
+
+ spmi {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
new file mode 100644
index 0000000..462a42f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.txt
@@ -0,0 +1,41 @@
+System Power Management Interface (SPMI) Controller
+
+This document defines a generic set of bindings for use by SPMI controllers. A
+controller is modelled in device tree as a node with zero or more child nodes,
+each representing a unique slave on the bus.
+
+Required properties:
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+
+Child nodes:
+
+An SPMI controller node can contain zero or more child nodes representing slave
+devices on the bus. Child 'reg' properties are specified as an address, type
+pair. The address must be in the range 0-15 (4 bits). The type must be one of
+SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
+These are the identifiers "statically assigned by the system integrator", as
+per the SPMI spec.
+
+Each child node must have one and only one 'reg' entry of type SPMI_USID.
+
+#include <dt-bindings/spmi/spmi.h>
+
+ spmi@.. {
+ compatible = "...";
+ reg = <...>;
+
+ #address-cells = <2>;
+ #size-cells <0>;
+
+ child@0 {
+ compatible = "...";
+ reg = <0 SPMI_USID>;
+ };
+
+ child@7 {
+ compatible = "...";
+ reg = <7 SPMI_USID
+ 3 SPMI_GSID>;
+ };
+ };
diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490
index 28176de..3e09115 100644
--- a/Documentation/w1/masters/ds2490
+++ b/Documentation/w1/masters/ds2490
@@ -21,8 +21,6 @@
- The weak pullup current is a minimum of 0.9mA and maximum of 6.0mA.
- The 5V strong pullup is supported with a minimum of 5.9mA and a
maximum of 30.4 mA. (From DS2490.pdf)
-- While the ds2490 supports a hardware search the code doesn't take
- advantage of it (in tested case it only returned first device).
- The hardware will detect when devices are attached to the bus on the
next bus (reset?) operation, however only a message is printed as
the core w1 code doesn't make use of the information. Connecting
diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink
index f59a319..927a52c 100644
--- a/Documentation/w1/w1.netlink
+++ b/Documentation/w1/w1.netlink
@@ -5,8 +5,8 @@
=============
There are three types of messages between w1 core and userspace:
-1. Events. They are generated each time new master or slave device
- found either due to automatic or requested search.
+1. Events. They are generated each time a new master or slave device
+ is found either due to automatic or requested search.
2. Userspace commands.
3. Replies to userspace commands.
@@ -131,7 +131,7 @@
of the sizeof(struct w1_netlink_msg) and sizeof(struct w1_netlink_cmd).
If reply is generated for master or root command (which do not have
w1_netlink_cmd attached), reply will contain only cn_msg and w1_netlink_msg
-structires.
+structures.
w1_netlink_msg.status field will carry positive error value
(EINVAL for example) or zero in case of success.
@@ -160,7 +160,7 @@
Then all requested in w1_netlink_msg operations are performed one by one.
If command requires reply (like read command) it is sent on command completion.
-When all commands (w1_netlink_cmd) are processed muster device is unlocked
+When all commands (w1_netlink_cmd) are processed master device is unlocked
and next w1_netlink_msg header processing started.
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 10666ca..9044c53 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -421,7 +421,7 @@
};
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 6496159..327e87b 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -378,7 +378,7 @@
};
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 320335a..f49eb13 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -341,7 +341,7 @@
};
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
+ compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
};
diff --git a/drivers/Kconfig b/drivers/Kconfig
index b3138fb..e0a4ae6 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -52,6 +52,8 @@
source "drivers/spi/Kconfig"
+source "drivers/spmi/Kconfig"
+
source "drivers/hsi/Kconfig"
source "drivers/pps/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 8e3b8b0..3d6de8b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@
obj-$(CONFIG_TARGET_CORE) += target/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_SPMI) += spmi/
obj-y += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
diff --git a/drivers/base/regmap/regmap-spmi.c b/drivers/base/regmap/regmap-spmi.c
index ac23910..d7026dc 100644
--- a/drivers/base/regmap/regmap-spmi.c
+++ b/drivers/base/regmap/regmap-spmi.c
@@ -22,69 +22,235 @@
#include <linux/module.h>
#include <linux/init.h>
-static int regmap_spmi_read(void *context,
- const void *reg, size_t reg_size,
- void *val, size_t val_size)
+static int regmap_spmi_base_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
{
- BUG_ON(reg_size != 2);
- return spmi_ext_register_readl(context, *(u16 *)reg,
- val, val_size);
+ u8 addr = *(u8 *)reg;
+ int err = 0;
+
+ BUG_ON(reg_size != 1);
+
+ while (val_size-- && !err)
+ err = spmi_register_read(context, addr++, val++);
+
+ return err;
}
-static int regmap_spmi_gather_write(void *context,
- const void *reg, size_t reg_size,
- const void *val, size_t val_size)
+static int regmap_spmi_base_gather_write(void *context,
+ const void *reg, size_t reg_size,
+ const void *val, size_t val_size)
{
- BUG_ON(reg_size != 2);
- return spmi_ext_register_writel(context, *(u16 *)reg, val, val_size);
+ const u8 *data = val;
+ u8 addr = *(u8 *)reg;
+ int err = 0;
+
+ BUG_ON(reg_size != 1);
+
+ /*
+ * SPMI defines a more bandwidth-efficient 'Register 0 Write' sequence,
+ * use it when possible.
+ */
+ if (addr == 0 && val_size) {
+ err = spmi_register_zero_write(context, *data);
+ if (err)
+ goto err_out;
+
+ data++;
+ addr++;
+ val_size--;
+ }
+
+ while (val_size) {
+ err = spmi_register_write(context, addr, *data);
+ if (err)
+ goto err_out;
+
+ data++;
+ addr++;
+ val_size--;
+ }
+
+err_out:
+ return err;
}
-static int regmap_spmi_write(void *context, const void *data,
- size_t count)
+static int regmap_spmi_base_write(void *context, const void *data,
+ size_t count)
{
- BUG_ON(count < 2);
- return regmap_spmi_gather_write(context, data, 2, data + 2, count - 2);
+ BUG_ON(count < 1);
+ return regmap_spmi_base_gather_write(context, data, 1, data + 1,
+ count - 1);
}
-static struct regmap_bus regmap_spmi = {
- .read = regmap_spmi_read,
- .write = regmap_spmi_write,
- .gather_write = regmap_spmi_gather_write,
+static struct regmap_bus regmap_spmi_base = {
+ .read = regmap_spmi_base_read,
+ .write = regmap_spmi_base_write,
+ .gather_write = regmap_spmi_base_gather_write,
.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
};
/**
- * regmap_init_spmi(): Initialize register map
- *
- * @sdev: Device that will be interacted with
- * @config: Configuration for register map
+ * regmap_init_spmi_base(): Create regmap for the Base register space
+ * @sdev: SPMI device that will be interacted with
+ * @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer to
* a struct regmap.
*/
-struct regmap *regmap_init_spmi(struct spmi_device *sdev,
- const struct regmap_config *config)
+struct regmap *regmap_init_spmi_base(struct spmi_device *sdev,
+ const struct regmap_config *config)
{
- return regmap_init(&sdev->dev, ®map_spmi, sdev, config);
+ return regmap_init(&sdev->dev, ®map_spmi_base, sdev, config);
}
-EXPORT_SYMBOL_GPL(regmap_init_spmi);
+EXPORT_SYMBOL_GPL(regmap_init_spmi_base);
/**
- * devm_regmap_init_spmi(): Initialise managed register map
- *
- * @sdev: Device that will be interacted with
- * @config: Configuration for register map
+ * devm_regmap_init_spmi_base(): Create managed regmap for Base register space
+ * @sdev: SPMI device that will be interacted with
+ * @config: Configuration for register map
*
* The return value will be an ERR_PTR() on error or a valid pointer
* to a struct regmap. The regmap will be automatically freed by the
* device management code.
*/
-struct regmap *devm_regmap_init_spmi(struct spmi_device *sdev,
+struct regmap *devm_regmap_init_spmi_base(struct spmi_device *sdev,
+ const struct regmap_config *config)
+{
+ return devm_regmap_init(&sdev->dev, ®map_spmi_base, sdev, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_base);
+
+static int regmap_spmi_ext_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ int err = 0;
+ size_t len;
+ u16 addr;
+
+ BUG_ON(reg_size != 2);
+
+ addr = *(u16 *)reg;
+
+ /*
+ * Split accesses into two to take advantage of the more
+ * bandwidth-efficient 'Extended Register Read' command when possible
+ */
+ while (addr <= 0xFF && val_size) {
+ len = min_t(size_t, val_size, 16);
+
+ err = spmi_ext_register_read(context, addr, val, len);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+ while (val_size) {
+ len = min_t(size_t, val_size, 8);
+
+ err = spmi_ext_register_readl(context, addr, val, val_size);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+err_out:
+ return err;
+}
+
+static int regmap_spmi_ext_gather_write(void *context,
+ const void *reg, size_t reg_size,
+ const void *val, size_t val_size)
+{
+ int err = 0;
+ size_t len;
+ u16 addr;
+
+ BUG_ON(reg_size != 2);
+
+ addr = *(u16 *)reg;
+
+ while (addr <= 0xFF && val_size) {
+ len = min_t(size_t, val_size, 16);
+
+ err = spmi_ext_register_write(context, addr, val, len);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+ while (val_size) {
+ len = min_t(size_t, val_size, 8);
+
+ err = spmi_ext_register_writel(context, addr, val, len);
+ if (err)
+ goto err_out;
+
+ addr += len;
+ val += len;
+ val_size -= len;
+ }
+
+err_out:
+ return err;
+}
+
+static int regmap_spmi_ext_write(void *context, const void *data,
+ size_t count)
+{
+ BUG_ON(count < 2);
+ return regmap_spmi_ext_gather_write(context, data, 2, data + 2,
+ count - 2);
+}
+
+static struct regmap_bus regmap_spmi_ext = {
+ .read = regmap_spmi_ext_read,
+ .write = regmap_spmi_ext_write,
+ .gather_write = regmap_spmi_ext_gather_write,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+/**
+ * regmap_init_spmi_ext(): Create regmap for Ext register space
+ * @sdev: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+struct regmap *regmap_init_spmi_ext(struct spmi_device *sdev,
+ const struct regmap_config *config)
+{
+ return regmap_init(&sdev->dev, ®map_spmi_ext, sdev, config);
+}
+EXPORT_SYMBOL_GPL(regmap_init_spmi_ext);
+
+/**
+ * devm_regmap_init_spmi_ext(): Create managed regmap for Ext register space
+ * @sdev: SPMI device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *sdev,
const struct regmap_config *config)
{
- return devm_regmap_init(&sdev->dev, ®map_spmi, sdev, config);
+ return devm_regmap_init(&sdev->dev, ®map_spmi_ext, sdev, config);
}
-EXPORT_SYMBOL_GPL(devm_regmap_init_spmi);
+EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_ext);
MODULE_LICENSE("GPL");
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 1b19239..8121b4c 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -31,7 +31,6 @@
#include <linux/module.h>
#include <linux/mman.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/agp_backend.h>
#include <linux/agpgart.h>
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index f39437a..0fbccce 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -29,7 +29,6 @@
*/
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/miscdevice.h>
#include <linux/pm.h>
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 5c85350..9a024f8 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index 05b8d02..3051c73 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/init.h>
#include <linux/agp_backend.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index 43577ca..8c3b255 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -8,7 +8,6 @@
*/
#include <linux/hw_random.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index a0f7724..b9495a8 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -37,7 +37,6 @@
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/sched.h>
-#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/char/hw_random/exynos-rng.c b/drivers/char/hw_random/exynos-rng.c
index 402ccfb..9f8277c 100644
--- a/drivers/char/hw_random/exynos-rng.c
+++ b/drivers/char/hw_random/exynos-rng.c
@@ -22,7 +22,6 @@
#include <linux/hw_random.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index f9beed5..432232e 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -7,7 +7,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/preempt.h>
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index 232b87f..00e9d2d 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/hw_random.h>
diff --git a/drivers/char/hw_random/octeon-rng.c b/drivers/char/hw_random/octeon-rng.c
index f2885db..b5cc342 100644
--- a/drivers/char/hw_random/octeon-rng.c
+++ b/drivers/char/hw_random/octeon-rng.c
@@ -10,7 +10,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/hw_random.h>
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 03f4189..b7efd3c 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -61,7 +61,6 @@
#include <linux/ipmi_smi.h>
#include <asm/io.h>
#include "ipmi_si_sm.h"
-#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/string.h>
#include <linux/ctype.h>
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 92c5937..917403f 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -99,6 +99,9 @@
ssize_t read, sz;
char *ptr;
+ if (p != *ppos)
+ return 0;
+
if (!valid_phys_addr_range(p, count))
return -EFAULT;
read = 0;
@@ -157,6 +160,9 @@
unsigned long copied;
void *ptr;
+ if (p != *ppos)
+ return -EFBIG;
+
if (!valid_phys_addr_range(p, count))
return -EFAULT;
diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c
index 881c9e5..2874004 100644
--- a/drivers/char/mwave/3780i.c
+++ b/drivers/char/mwave/3780i.c
@@ -50,7 +50,6 @@
#include <linux/unistd.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/sched.h> /* cond_resched() */
diff --git a/drivers/char/tile-srom.c b/drivers/char/tile-srom.c
index 0e506ba..bd37747 100644
--- a/drivers/char/tile-srom.c
+++ b/drivers/char/tile-srom.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/init.h>
#include <linux/kernel.h> /* printk() */
#include <linux/slab.h> /* kmalloc() */
#include <linux/fs.h> /* everything... */
diff --git a/drivers/char/tpm/tpm_i2c_infineon.c b/drivers/char/tpm/tpm_i2c_infineon.c
index 52b9b2b..472af4b 100644
--- a/drivers/char/tpm/tpm_i2c_infineon.c
+++ b/drivers/char/tpm/tpm_i2c_infineon.c
@@ -21,7 +21,6 @@
*
*
*/
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/wait.h>
diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
index 5b0dd8e..3b7bf21 100644
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ b/drivers/char/tpm/tpm_i2c_stm_st33.c
@@ -38,7 +38,6 @@
#include <linux/miscdevice.h>
#include <linux/kernel.h>
#include <linux/delay.h>
-#include <linux/init.h>
#include <linux/wait.h>
#include <linux/string.h>
#include <linux/interrupt.h>
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index 18c5b9b..148d707 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -95,7 +95,7 @@
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
/* If cn_netlink_send() failed, the data is not sent */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_exec_connector(struct task_struct *task)
@@ -122,7 +122,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_id_connector(struct task_struct *task, int which_id)
@@ -163,7 +163,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_sid_connector(struct task_struct *task)
@@ -190,7 +190,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_ptrace_connector(struct task_struct *task, int ptrace_id)
@@ -225,7 +225,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_comm_connector(struct task_struct *task)
@@ -253,7 +253,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_coredump_connector(struct task_struct *task)
@@ -280,7 +280,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
void proc_exit_connector(struct task_struct *task)
@@ -309,7 +309,7 @@
msg->ack = 0; /* not used */
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
/*
@@ -343,7 +343,7 @@
msg->ack = rcvd_ack + 1;
msg->len = sizeof(*ev);
msg->flags = 0; /* not used */
- cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL);
+ cn_netlink_send(msg, 0, CN_IDX_PROC, GFP_KERNEL);
}
/**
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index a36749f..77afe74 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -50,7 +50,7 @@
*
* Sequence number is incremented with each message to be sent.
*
- * If we expect reply to our message then the sequence number in
+ * If we expect a reply to our message then the sequence number in
* received message MUST be the same as in original message, and
* acknowledge number MUST be the same + 1.
*
@@ -62,8 +62,11 @@
* the acknowledgement number in the original message + 1, then it is
* a new message.
*
+ * The message is sent to, the portid if given, the group if given, both if
+ * both, or if both are zero then the group is looked up and sent there.
*/
-int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
+int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group,
+ gfp_t gfp_mask)
{
struct cn_callback_entry *__cbq;
unsigned int size;
@@ -74,7 +77,9 @@
u32 group = 0;
int found = 0;
- if (!__group) {
+ if (portid || __group) {
+ group = __group;
+ } else {
spin_lock_bh(&dev->cbdev->queue_lock);
list_for_each_entry(__cbq, &dev->cbdev->queue_list,
callback_entry) {
@@ -88,11 +93,9 @@
if (!found)
return -ENODEV;
- } else {
- group = __group;
}
- if (!netlink_has_listeners(dev->nls, group))
+ if (!portid && !netlink_has_listeners(dev->nls, group))
return -ESRCH;
size = sizeof(*msg) + msg->len;
@@ -113,7 +116,10 @@
NETLINK_CB(skb).dst_group = group;
- return netlink_broadcast(dev->nls, skb, 0, group, gfp_mask);
+ if (group)
+ return netlink_broadcast(dev->nls, skb, portid, group,
+ gfp_mask);
+ return netlink_unicast(dev->nls, skb, portid, !(gfp_mask&__GFP_WAIT));
}
EXPORT_SYMBOL_GPL(cn_netlink_send);
diff --git a/drivers/fmc/fmc-core.c b/drivers/fmc/fmc-core.c
index 24d5249..5a5e616 100644
--- a/drivers/fmc/fmc-core.c
+++ b/drivers/fmc/fmc-core.c
@@ -154,7 +154,7 @@
ret = -EINVAL;
break;
}
- if (fmc->flags == FMC_DEVICE_NO_MEZZANINE) {
+ if (fmc->flags & FMC_DEVICE_NO_MEZZANINE) {
dev_info(fmc->hwdev, "absent mezzanine in slot %d\n",
fmc->slot_id);
continue;
@@ -189,9 +189,6 @@
for (i = 0; i < n; i++) {
fmc = devarray[i];
- if (fmc->flags == FMC_DEVICE_NO_MEZZANINE)
- continue; /* dev_info already done above */
-
fmc->nr_slots = n; /* each slot must know how many are there */
fmc->devarray = devarray;
@@ -263,8 +260,6 @@
kfree(devs[0]->devarray);
for (i = 0; i < n; i++) {
- if (devs[i]->flags == FMC_DEVICE_NO_MEZZANINE)
- continue;
sysfs_remove_bin_file(&devs[i]->dev.kobj, &fmc_eeprom_attr);
device_del(&devs[i]->dev);
fmc_free_id_info(devs[i]);
diff --git a/drivers/fmc/fmc-sdb.c b/drivers/fmc/fmc-sdb.c
index 79adc39..69f42d7 100644
--- a/drivers/fmc/fmc-sdb.c
+++ b/drivers/fmc/fmc-sdb.c
@@ -153,20 +153,17 @@
static void __fmc_show_sdb_tree(const struct fmc_device *fmc,
const struct sdb_array *arr)
{
+ unsigned long base = arr->baseaddr;
int i, j, n = arr->len, level = arr->level;
- const struct sdb_array *ap;
for (i = 0; i < n; i++) {
- unsigned long base;
union sdb_record *r;
struct sdb_product *p;
struct sdb_component *c;
r = &arr->record[i];
c = &r->dev.sdb_component;
p = &c->product;
- base = 0;
- for (ap = arr; ap; ap = ap->parent)
- base += ap->baseaddr;
+
dev_info(&fmc->dev, "SDB: ");
for (j = 0; j < level; j++)
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 69ea36f..602ca86 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/hyperv.h>
+#include <linux/uio.h>
#include "hyperv_vmbus.h"
@@ -554,14 +555,14 @@
*
* Mainly used by Hyper-V drivers.
*/
-int vmbus_sendpacket(struct vmbus_channel *channel, const void *buffer,
+int vmbus_sendpacket(struct vmbus_channel *channel, void *buffer,
u32 bufferlen, u64 requestid,
enum vmbus_packet_type type, u32 flags)
{
struct vmpacket_descriptor desc;
u32 packetlen = sizeof(struct vmpacket_descriptor) + bufferlen;
u32 packetlen_aligned = ALIGN(packetlen, sizeof(u64));
- struct scatterlist bufferlist[3];
+ struct kvec bufferlist[3];
u64 aligned_data = 0;
int ret;
bool signal = false;
@@ -575,11 +576,12 @@
desc.len8 = (u16)(packetlen_aligned >> 3);
desc.trans_id = requestid;
- sg_init_table(bufferlist, 3);
- sg_set_buf(&bufferlist[0], &desc, sizeof(struct vmpacket_descriptor));
- sg_set_buf(&bufferlist[1], buffer, bufferlen);
- sg_set_buf(&bufferlist[2], &aligned_data,
- packetlen_aligned - packetlen);
+ bufferlist[0].iov_base = &desc;
+ bufferlist[0].iov_len = sizeof(struct vmpacket_descriptor);
+ bufferlist[1].iov_base = buffer;
+ bufferlist[1].iov_len = bufferlen;
+ bufferlist[2].iov_base = &aligned_data;
+ bufferlist[2].iov_len = (packetlen_aligned - packetlen);
ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal);
@@ -605,7 +607,7 @@
u32 descsize;
u32 packetlen;
u32 packetlen_aligned;
- struct scatterlist bufferlist[3];
+ struct kvec bufferlist[3];
u64 aligned_data = 0;
bool signal = false;
@@ -637,11 +639,12 @@
desc.range[i].pfn = pagebuffers[i].pfn;
}
- sg_init_table(bufferlist, 3);
- sg_set_buf(&bufferlist[0], &desc, descsize);
- sg_set_buf(&bufferlist[1], buffer, bufferlen);
- sg_set_buf(&bufferlist[2], &aligned_data,
- packetlen_aligned - packetlen);
+ bufferlist[0].iov_base = &desc;
+ bufferlist[0].iov_len = descsize;
+ bufferlist[1].iov_base = buffer;
+ bufferlist[1].iov_len = bufferlen;
+ bufferlist[2].iov_base = &aligned_data;
+ bufferlist[2].iov_len = (packetlen_aligned - packetlen);
ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal);
@@ -665,7 +668,7 @@
u32 descsize;
u32 packetlen;
u32 packetlen_aligned;
- struct scatterlist bufferlist[3];
+ struct kvec bufferlist[3];
u64 aligned_data = 0;
bool signal = false;
u32 pfncount = NUM_PAGES_SPANNED(multi_pagebuffer->offset,
@@ -700,11 +703,12 @@
memcpy(desc.range.pfn_array, multi_pagebuffer->pfn_array,
pfncount * sizeof(u64));
- sg_init_table(bufferlist, 3);
- sg_set_buf(&bufferlist[0], &desc, descsize);
- sg_set_buf(&bufferlist[1], buffer, bufferlen);
- sg_set_buf(&bufferlist[2], &aligned_data,
- packetlen_aligned - packetlen);
+ bufferlist[0].iov_base = &desc;
+ bufferlist[0].iov_len = descsize;
+ bufferlist[1].iov_base = buffer;
+ bufferlist[1].iov_len = bufferlen;
+ bufferlist[2].iov_base = &aligned_data;
+ bufferlist[2].iov_len = (packetlen_aligned - packetlen);
ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal);
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index 7e17a54..7e6d78d 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -1171,7 +1171,8 @@
int t;
while (!kthread_should_stop()) {
- t = wait_for_completion_timeout(&dm_device.config_event, 1*HZ);
+ t = wait_for_completion_interruptible_timeout(
+ &dm_device.config_event, 1*HZ);
/*
* The host expects us to post information on the memory
* pressure every second.
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 09988b2..ea85253 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -113,7 +113,7 @@
kvp_msg->kvp_hdr.operation = reg_value;
strcpy(version, HV_DRV_VERSION);
msg->len = sizeof(struct hv_kvp_msg);
- cn_netlink_send(msg, 0, GFP_ATOMIC);
+ cn_netlink_send(msg, 0, 0, GFP_ATOMIC);
kfree(msg);
}
}
@@ -435,7 +435,7 @@
}
msg->len = sizeof(struct hv_kvp_msg);
- cn_netlink_send(msg, 0, GFP_ATOMIC);
+ cn_netlink_send(msg, 0, 0, GFP_ATOMIC);
kfree(msg);
return;
diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c
index 0c35462..34f14fd 100644
--- a/drivers/hv/hv_snapshot.c
+++ b/drivers/hv/hv_snapshot.c
@@ -98,7 +98,7 @@
vss_msg->vss_hdr.operation = op;
msg->len = sizeof(struct hv_vss_msg);
- cn_netlink_send(msg, 0, GFP_ATOMIC);
+ cn_netlink_send(msg, 0, 0, GFP_ATOMIC);
kfree(msg);
return;
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index e055176..1544609 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -559,8 +559,8 @@
void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info);
int hv_ringbuffer_write(struct hv_ring_buffer_info *ring_info,
- struct scatterlist *sglist,
- u32 sgcount, bool *signal);
+ struct kvec *kv_list,
+ u32 kv_count, bool *signal);
int hv_ringbuffer_peek(struct hv_ring_buffer_info *ring_info, void *buffer,
u32 buflen);
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 26c93cf..15db66b 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/hyperv.h>
+#include <linux/uio.h>
#include "hyperv_vmbus.h"
@@ -387,23 +388,20 @@
*
*/
int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
- struct scatterlist *sglist, u32 sgcount, bool *signal)
+ struct kvec *kv_list, u32 kv_count, bool *signal)
{
int i = 0;
u32 bytes_avail_towrite;
u32 bytes_avail_toread;
u32 totalbytes_towrite = 0;
- struct scatterlist *sg;
u32 next_write_location;
u32 old_write;
u64 prev_indices = 0;
unsigned long flags;
- for_each_sg(sglist, sg, sgcount, i)
- {
- totalbytes_towrite += sg->length;
- }
+ for (i = 0; i < kv_count; i++)
+ totalbytes_towrite += kv_list[i].iov_len;
totalbytes_towrite += sizeof(u64);
@@ -427,12 +425,11 @@
old_write = next_write_location;
- for_each_sg(sglist, sg, sgcount, i)
- {
+ for (i = 0; i < kv_count; i++) {
next_write_location = hv_copyto_ringbuffer(outring_info,
next_write_location,
- sg_virt(sg),
- sg->length);
+ kv_list[i].iov_base,
+ kv_list[i].iov_len);
}
/* Set previous packet start */
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 077bb1b..b37c91b 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -43,6 +43,10 @@
static struct tasklet_struct msg_dpc;
static struct completion probe_event;
static int irq;
+u64 hyperv_mmio_start;
+EXPORT_SYMBOL_GPL(hyperv_mmio_start);
+u64 hyperv_mmio_size;
+EXPORT_SYMBOL_GPL(hyperv_mmio_size);
static int vmbus_exists(void)
{
@@ -886,18 +890,19 @@
/*
- * VMBUS is an acpi enumerated device. Get the the IRQ information
- * from DSDT.
+ * VMBUS is an acpi enumerated device. Get the the information we
+ * need from DSDT.
*/
-static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *irq)
+static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx)
{
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+ irq = res->data.irq.interrupts[0];
- if (res->type == ACPI_RESOURCE_TYPE_IRQ) {
- struct acpi_resource_irq *irqp;
- irqp = &res->data.irq;
-
- *((unsigned int *)irq) = irqp->interrupts[0];
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ hyperv_mmio_start = res->data.address64.minimum;
+ hyperv_mmio_size = res->data.address64.address_length;
}
return AE_OK;
@@ -906,18 +911,32 @@
static int vmbus_acpi_add(struct acpi_device *device)
{
acpi_status result;
+ int ret_val = -ENODEV;
hv_acpi_dev = device;
result = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
- vmbus_walk_resources, &irq);
+ vmbus_walk_resources, NULL);
- if (ACPI_FAILURE(result)) {
- complete(&probe_event);
- return -ENODEV;
+ if (ACPI_FAILURE(result))
+ goto acpi_walk_err;
+ /*
+ * The parent of the vmbus acpi device (Gen2 firmware) is the VMOD that
+ * has the mmio ranges. Get that.
+ */
+ if (device->parent) {
+ result = acpi_walk_resources(device->parent->handle,
+ METHOD_NAME__CRS,
+ vmbus_walk_resources, NULL);
+
+ if (ACPI_FAILURE(result))
+ goto acpi_walk_err;
}
+ ret_val = 0;
+
+acpi_walk_err:
complete(&probe_event);
- return 0;
+ return ret_val;
}
static const struct acpi_device_id vmbus_acpi_device_ids[] = {
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 08d9a20..b428c0a 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -66,7 +66,7 @@
msg->seq = tfr->seq;
msg->len = sizeof(struct dm_ulog_request) + tfr->data_size;
- r = cn_netlink_send(msg, 0, gfp_any());
+ r = cn_netlink_send(msg, 0, 0, gfp_any());
return r;
}
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index d3eee11..a43053d 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -72,7 +72,6 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index 0c6e037..c6cc3dc 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -22,7 +22,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 820e53d..9b313f7 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -47,7 +47,6 @@
#include <linux/module.h>
#include <linux/device.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/of.h>
#include "bmp085.h"
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
index 9e2b985..14d90ea 100644
--- a/drivers/misc/carma/carma-fpga.c
+++ b/drivers/misc/carma/carma-fpga.c
@@ -101,7 +101,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/poll.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/kref.h>
#include <linux/io.h>
diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c
index 154b02e..6a672f9 100644
--- a/drivers/misc/ds1682.c
+++ b/drivers/misc/ds1682.c
@@ -32,7 +32,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/string.h>
#include <linux/list.h>
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 4f3bca1..634f729 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -10,7 +10,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c
index f0fa4e8..33f8673 100644
--- a/drivers/misc/eeprom/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
@@ -17,7 +17,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 78e55b5..9ebeacd 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -11,7 +11,6 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index e36157d..580ff9d 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -27,7 +27,6 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c
index 9c34e57..3f2b625 100644
--- a/drivers/misc/eeprom/sunxi_sid.c
+++ b/drivers/misc/eeprom/sunxi_sid.c
@@ -21,7 +21,6 @@
#include <linux/err.h>
#include <linux/export.h>
#include <linux/fs.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/kobject.h>
@@ -96,7 +95,7 @@
}
static const struct of_device_id sunxi_sid_of_match[] = {
- { .compatible = "allwinner,sun4i-sid", .data = (void *)16},
+ { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16},
{ .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512},
{/* sentinel */},
};
diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c
index 3bfdc07..50d2096 100644
--- a/drivers/misc/genwqe/card_debugfs.c
+++ b/drivers/misc/genwqe/card_debugfs.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c
index 170bd3d..90520d7 100644
--- a/drivers/misc/hmc6352.c
+++ b/drivers/misc/hmc6352.c
@@ -22,7 +22,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index e3183f2..12c30b4 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -26,7 +26,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
index b7f84da..4a9c50a 100644
--- a/drivers/misc/isl29020.c
+++ b/drivers/misc/isl29020.c
@@ -23,7 +23,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 61fbe6a..0a1565e 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index 036effe..3ef4627 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -23,7 +23,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/types.h>
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index 7c97550..d324f8a 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/pm_runtime.h>
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
index 9aa2bd2..bd06d0c 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_spi.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/err.h>
#include <linux/input.h>
#include <linux/interrupt.h>
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 49c7a23..d66a2f2 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -30,6 +30,7 @@
*
* See Documentation/fault-injection/provoke-crashes.txt for instructions
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/fs.h>
@@ -45,6 +46,7 @@
#include <linux/debugfs.h>
#include <linux/vmalloc.h>
#include <linux/mman.h>
+#include <asm/cacheflush.h>
#ifdef CONFIG_IDE
#include <linux/ide.h>
@@ -101,6 +103,7 @@
CT_EXEC_USERSPACE,
CT_ACCESS_USERSPACE,
CT_WRITE_RO,
+ CT_WRITE_KERN,
};
static char* cp_name[] = {
@@ -137,6 +140,7 @@
"EXEC_USERSPACE",
"ACCESS_USERSPACE",
"WRITE_RO",
+ "WRITE_KERN",
};
static struct jprobe lkdtm;
@@ -316,6 +320,13 @@
return;
}
+/* Must immediately follow do_nothing for size calculuations to work out. */
+static void do_overwritten(void)
+{
+ pr_info("do_overwritten wasn't overwritten!\n");
+ return;
+}
+
static noinline void corrupt_stack(void)
{
/* Use default char array length that triggers stack protection. */
@@ -328,7 +339,12 @@
{
void (*func)(void) = dst;
+ pr_info("attempting ok execution at %p\n", do_nothing);
+ do_nothing();
+
memcpy(dst, do_nothing, EXEC_SIZE);
+ flush_icache_range((unsigned long)dst, (unsigned long)dst + EXEC_SIZE);
+ pr_info("attempting bad execution at %p\n", func);
func();
}
@@ -337,8 +353,13 @@
/* Intentionally crossing kernel/user memory boundary. */
void (*func)(void) = dst;
+ pr_info("attempting ok execution at %p\n", do_nothing);
+ do_nothing();
+
if (copy_to_user((void __user *)dst, do_nothing, EXEC_SIZE))
return;
+ flush_icache_range((unsigned long)dst, (unsigned long)dst + EXEC_SIZE);
+ pr_info("attempting bad execution at %p\n", func);
func();
}
@@ -463,8 +484,12 @@
}
ptr = (unsigned long *)user_addr;
+
+ pr_info("attempting bad read at %p\n", ptr);
tmp = *ptr;
tmp += 0xc0dec0de;
+
+ pr_info("attempting bad write at %p\n", ptr);
*ptr = tmp;
vm_munmap(user_addr, PAGE_SIZE);
@@ -475,10 +500,28 @@
unsigned long *ptr;
ptr = (unsigned long *)&rodata;
+
+ pr_info("attempting bad write at %p\n", ptr);
*ptr ^= 0xabcd1234;
break;
}
+ case CT_WRITE_KERN: {
+ size_t size;
+ unsigned char *ptr;
+
+ size = (unsigned long)do_overwritten -
+ (unsigned long)do_nothing;
+ ptr = (unsigned char *)do_overwritten;
+
+ pr_info("attempting bad %zu byte write at %p\n", size, ptr);
+ memcpy(ptr, (unsigned char *)do_nothing, size);
+ flush_icache_range((unsigned long)ptr,
+ (unsigned long)(ptr + size));
+
+ do_overwritten();
+ break;
+ }
case CT_NONE:
default:
break;
@@ -493,8 +536,8 @@
spin_lock_irqsave(&count_lock, flags);
count--;
- printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n",
- cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
+ pr_info("Crash point %s of type %s hit, trigger in %d rounds\n",
+ cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
if (count == 0) {
do_it = true;
@@ -551,18 +594,18 @@
lkdtm.kp.symbol_name = "generic_ide_ioctl";
lkdtm.entry = (kprobe_opcode_t*) jp_generic_ide_ioctl;
#else
- printk(KERN_INFO "lkdtm: Crash point not available\n");
+ pr_info("Crash point not available\n");
return -EINVAL;
#endif
break;
default:
- printk(KERN_INFO "lkdtm: Invalid Crash Point\n");
+ pr_info("Invalid Crash Point\n");
return -EINVAL;
}
cpoint = which;
if ((ret = register_jprobe(&lkdtm)) < 0) {
- printk(KERN_INFO "lkdtm: Couldn't register jprobe\n");
+ pr_info("Couldn't register jprobe\n");
cpoint = CN_INVALID;
}
@@ -709,8 +752,7 @@
if (type == CT_NONE)
return -EINVAL;
- printk(KERN_INFO "lkdtm: Performing direct entry %s\n",
- cp_type_to_str(type));
+ pr_info("Performing direct entry %s\n", cp_type_to_str(type));
lkdtm_do_action(type);
*off += count;
@@ -772,7 +814,7 @@
/* Register debugfs interface */
lkdtm_debugfs_root = debugfs_create_dir("provoke-crash", NULL);
if (!lkdtm_debugfs_root) {
- printk(KERN_ERR "lkdtm: creating root dir failed\n");
+ pr_err("creating root dir failed\n");
return -ENODEV;
}
@@ -787,28 +829,26 @@
de = debugfs_create_file(cur->name, 0644, lkdtm_debugfs_root,
NULL, &cur->fops);
if (de == NULL) {
- printk(KERN_ERR "lkdtm: could not create %s\n",
- cur->name);
+ pr_err("could not create %s\n", cur->name);
goto out_err;
}
}
if (lkdtm_parse_commandline() == -EINVAL) {
- printk(KERN_INFO "lkdtm: Invalid command\n");
+ pr_info("Invalid command\n");
goto out_err;
}
if (cpoint != CN_INVALID && cptype != CT_NONE) {
ret = lkdtm_register_cpoint(cpoint);
if (ret < 0) {
- printk(KERN_INFO "lkdtm: Invalid crash point %d\n",
- cpoint);
+ pr_info("Invalid crash point %d\n", cpoint);
goto out_err;
}
- printk(KERN_INFO "lkdtm: Crash point %s of type %s registered\n",
- cpoint_name, cpoint_type);
+ pr_info("Crash point %s of type %s registered\n",
+ cpoint_name, cpoint_type);
} else {
- printk(KERN_INFO "lkdtm: No crash points registered, enable through debugfs\n");
+ pr_info("No crash points registered, enable through debugfs\n");
}
return 0;
@@ -823,7 +863,7 @@
debugfs_remove_recursive(lkdtm_debugfs_root);
unregister_jprobe(&lkdtm);
- printk(KERN_INFO "lkdtm: Crash point unregistered\n");
+ pr_info("Crash point unregistered\n");
}
module_init(lkdtm_module_init);
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
index c76fa31..d23384d 100644
--- a/drivers/misc/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
@@ -34,3 +34,12 @@
82Q33 Express
82X38/X48 Express
+config INTEL_MEI_TXE
+ tristate "Intel Trusted Execution Environment with ME Interface"
+ select INTEL_MEI
+ depends on X86 && PCI && WATCHDOG_CORE
+ help
+ MEI Support for Trusted Execution Environment device on Intel SoCs
+
+ Supported SoCs:
+ Intel Bay Trail
diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile
index 08698a4..8ebc6cd 100644
--- a/drivers/misc/mei/Makefile
+++ b/drivers/misc/mei/Makefile
@@ -1,6 +1,6 @@
#
# Makefile - Intel Management Engine Interface (Intel MEI) Linux driver
-# Copyright (c) 2010-2011, Intel Corporation.
+# Copyright (c) 2010-2014, Intel Corporation.
#
obj-$(CONFIG_INTEL_MEI) += mei.o
mei-objs := init.o
@@ -17,3 +17,7 @@
obj-$(CONFIG_INTEL_MEI_ME) += mei-me.o
mei-me-objs := pci-me.o
mei-me-objs += hw-me.o
+
+obj-$(CONFIG_INTEL_MEI_TXE) += mei-txe.o
+mei-txe-objs := pci-txe.o
+mei-txe-objs += hw-txe.o
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index 2fad844..f88cb26 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -21,7 +21,6 @@
#include <linux/fcntl.h>
#include <linux/aio.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/list.h>
@@ -365,7 +364,7 @@
if (ret)
return ret;
- cb->fop_type = MEI_FOP_IOCTL;
+ cb->fop_type = MEI_FOP_WRITE;
if (!list_empty(&dev->amthif_cmd_list.list) ||
dev->iamthif_state != MEI_IAMTHIF_IDLE) {
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 9b809cf..9ac72f1 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -505,7 +505,7 @@
goto out;
}
- cb->fop_type = MEI_FOP_IOCTL;
+ cb->fop_type = MEI_FOP_CONNECT;
if (dev->hbuf_is_ready && !mei_cl_is_other_connecting(cl)) {
dev->hbuf_is_ready = false;
diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c
index a3ae154..ced5b77 100644
--- a/drivers/misc/mei/debugfs.c
+++ b/drivers/misc/mei/debugfs.c
@@ -75,6 +75,54 @@
.llseek = generic_file_llseek,
};
+static ssize_t mei_dbgfs_read_active(struct file *fp, char __user *ubuf,
+ size_t cnt, loff_t *ppos)
+{
+ struct mei_device *dev = fp->private_data;
+ struct mei_cl *cl;
+ const size_t bufsz = 1024;
+ char *buf;
+ int i = 0;
+ int pos = 0;
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ buf = kzalloc(bufsz, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ " |me|host|state|rd|wr|\n");
+
+ mutex_lock(&dev->device_lock);
+
+ /* if the driver is not enabled the list won't b consitent */
+ if (dev->dev_state != MEI_DEV_ENABLED)
+ goto out;
+
+ list_for_each_entry(cl, &dev->file_list, link) {
+
+ pos += scnprintf(buf + pos, bufsz - pos,
+ "%2d|%2d|%4d|%5d|%2d|%2d|\n",
+ i, cl->me_client_id, cl->host_client_id, cl->state,
+ cl->reading_state, cl->writing_state);
+ i++;
+ }
+out:
+ mutex_unlock(&dev->device_lock);
+ ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+ kfree(buf);
+ return ret;
+}
+
+static const struct file_operations mei_dbgfs_fops_active = {
+ .open = simple_open,
+ .read = mei_dbgfs_read_active,
+ .llseek = generic_file_llseek,
+};
+
static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf,
size_t cnt, loff_t *ppos)
{
@@ -128,6 +176,12 @@
dev_err(&dev->pdev->dev, "meclients: registration failed\n");
goto err;
}
+ f = debugfs_create_file("active", S_IRUSR, dir,
+ dev, &mei_dbgfs_fops_active);
+ if (!f) {
+ dev_err(&dev->pdev->dev, "meclients: registration failed\n");
+ goto err;
+ }
f = debugfs_create_file("devstate", S_IRUSR, dir,
dev, &mei_dbgfs_fops_devstate);
if (!f) {
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index 28cd74c..d3fcb23 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -147,7 +147,7 @@
ret = wait_event_interruptible_timeout(dev->wait_recvd_msg,
dev->hbm_state == MEI_HBM_IDLE ||
dev->hbm_state >= MEI_HBM_STARTED,
- mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
+ mei_secs_to_jiffies(MEI_HBM_TIMEOUT));
mutex_lock(&dev->device_lock);
if (ret <= 0 && (dev->hbm_state <= MEI_HBM_START)) {
@@ -283,17 +283,18 @@
}
/**
- * mei_hbm_stop_req_prepare - prepare stop request message
+ * mei_hbm_stop_req - send stop request message
*
* @dev - mei device
- * @mei_hdr - mei message header
- * @data - hbm message body buffer
+ * @cl: client info
+ *
+ * This function returns -EIO on write failure
*/
-static void mei_hbm_stop_req_prepare(struct mei_device *dev,
- struct mei_msg_hdr *mei_hdr, unsigned char *data)
+static int mei_hbm_stop_req(struct mei_device *dev)
{
+ struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
struct hbm_host_stop_request *req =
- (struct hbm_host_stop_request *)data;
+ (struct hbm_host_stop_request *)dev->wr_msg.data;
const size_t len = sizeof(struct hbm_host_stop_request);
mei_hbm_hdr(mei_hdr, len);
@@ -301,6 +302,8 @@
memset(req, 0, len);
req->hbm_cmd = HOST_STOP_REQ_CMD;
req->reason = DRIVER_STOP_REQUEST;
+
+ return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
}
/**
@@ -405,6 +408,25 @@
}
/**
+ * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW
+ *
+ * @dev: the device structure
+ * @cl: a client to disconnect from
+ *
+ * This function returns -EIO on write failure
+ */
+int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl)
+{
+ struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr;
+ const size_t len = sizeof(struct hbm_client_connect_response);
+
+ mei_hbm_hdr(mei_hdr, len);
+ mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_RES_CMD, dev->wr_msg.data, len);
+
+ return mei_write_message(dev, mei_hdr, dev->wr_msg.data);
+}
+
+/**
* mei_hbm_cl_disconnect_res - disconnect response from ME
*
* @dev: the device structure
@@ -507,7 +529,7 @@
list_del(&pos->list);
return;
}
- if (pos->fop_type == MEI_FOP_IOCTL) {
+ if (pos->fop_type == MEI_FOP_CONNECT) {
if (is_treat_specially_client(cl, rs)) {
list_del(&pos->list);
cl->status = 0;
@@ -525,12 +547,14 @@
*
* @dev: the device structure.
* @disconnect_req: disconnect request bus message from the me
+ *
+ * returns -ENOMEM on allocation failure
*/
-static void mei_hbm_fw_disconnect_req(struct mei_device *dev,
+static int mei_hbm_fw_disconnect_req(struct mei_device *dev,
struct hbm_client_connect_request *disconnect_req)
{
struct mei_cl *cl, *next;
- const size_t len = sizeof(struct hbm_client_connect_response);
+ struct mei_cl_cb *cb;
list_for_each_entry_safe(cl, next, &dev->file_list, link) {
if (mei_hbm_cl_addr_equal(cl, disconnect_req)) {
@@ -544,13 +568,17 @@
else if (cl == &dev->iamthif_cl)
dev->iamthif_timer = 0;
- /* prepare disconnect response */
- mei_hbm_hdr(&dev->wr_ext_msg.hdr, len);
- mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_RES_CMD,
- dev->wr_ext_msg.data, len);
+ cb = mei_io_cb_init(cl, NULL);
+ if (!cb)
+ return -ENOMEM;
+ cb->fop_type = MEI_FOP_DISCONNECT_RSP;
+ cl_dbg(dev, cl, "add disconnect response as first\n");
+ list_add(&cb->list, &dev->ctrl_wr_list.list);
+
break;
}
}
+ return 0;
}
@@ -629,10 +657,7 @@
dev_warn(&dev->pdev->dev, "hbm: start: version mismatch - stopping the driver.\n");
dev->hbm_state = MEI_HBM_STOPPED;
- mei_hbm_stop_req_prepare(dev, &dev->wr_msg.hdr,
- dev->wr_msg.data);
- if (mei_write_message(dev, &dev->wr_msg.hdr,
- dev->wr_msg.data)) {
+ if (mei_hbm_stop_req(dev)) {
dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n");
return -EIO;
}
@@ -778,10 +803,11 @@
case ME_STOP_REQ_CMD:
dev_dbg(&dev->pdev->dev, "hbm: stop request: message received\n");
-
dev->hbm_state = MEI_HBM_STOPPED;
- mei_hbm_stop_req_prepare(dev, &dev->wr_ext_msg.hdr,
- dev->wr_ext_msg.data);
+ if (mei_hbm_stop_req(dev)) {
+ dev_err(&dev->pdev->dev, "hbm: start: failed to send stop request\n");
+ return -EIO;
+ }
break;
default:
BUG();
diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h
index 5f92188..20e8782 100644
--- a/drivers/misc/mei/hbm.h
+++ b/drivers/misc/mei/hbm.h
@@ -54,6 +54,7 @@
int mei_hbm_start_wait(struct mei_device *dev);
int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl);
int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl);
+int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl);
int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl);
bool mei_hbm_version_is_supported(struct mei_device *dev);
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 6f656c0..847c9e5 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -240,7 +240,7 @@
mutex_unlock(&dev->device_lock);
err = wait_event_interruptible_timeout(dev->wait_hw_ready,
dev->recvd_hw_ready,
- mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
+ mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
mutex_lock(&dev->device_lock);
if (!err && !dev->recvd_hw_ready) {
if (!err)
@@ -505,9 +505,6 @@
/* check slots available for reading */
slots = mei_count_full_read_slots(dev);
while (slots > 0) {
- /* we have urgent data to send so break the read */
- if (dev->wr_ext_msg.hdr.length)
- break;
dev_dbg(&dev->pdev->dev, "slots to read = %08x\n", slots);
rets = mei_irq_read_handler(dev, &complete_list, &slots);
if (rets && dev->dev_state != MEI_DEV_RESETTING) {
diff --git a/drivers/misc/mei/hw-txe-regs.h b/drivers/misc/mei/hw-txe-regs.h
new file mode 100644
index 0000000..7283c24
--- /dev/null
+++ b/drivers/misc/mei/hw-txe-regs.h
@@ -0,0 +1,294 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING
+ *
+ * Contact Information:
+ * Intel Corporation.
+ * linux-mei@linux.intel.com
+ * http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef _MEI_HW_TXE_REGS_H_
+#define _MEI_HW_TXE_REGS_H_
+
+#include "hw.h"
+
+#define SEC_ALIVENESS_TIMER_TIMEOUT (5 * MSEC_PER_SEC)
+#define SEC_ALIVENESS_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+#define SEC_RESET_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+#define SEC_READY_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
+#define START_MESSAGE_RESPONSE_WAIT_TIMEOUT (5 * MSEC_PER_SEC)
+#define RESET_CANCEL_WAIT_TIMEOUT (1 * MSEC_PER_SEC)
+
+enum {
+ SEC_BAR,
+ BRIDGE_BAR,
+
+ NUM_OF_MEM_BARS
+};
+
+/* SeC FW Status Register
+ *
+ * FW uses this register in order to report its status to host.
+ * This register resides in PCI-E config space.
+ */
+#define PCI_CFG_TXE_FW_STS0 0x40
+# define PCI_CFG_TXE_FW_STS0_WRK_ST_MSK 0x0000000F
+# define PCI_CFG_TXE_FW_STS0_OP_ST_MSK 0x000001C0
+# define PCI_CFG_TXE_FW_STS0_FW_INIT_CMPLT 0x00000200
+# define PCI_CFG_TXE_FW_STS0_ERR_CODE_MSK 0x0000F000
+# define PCI_CFG_TXE_FW_STS0_OP_MODE_MSK 0x000F0000
+# define PCI_CFG_TXE_FW_STS0_RST_CNT_MSK 0x00F00000
+
+
+#define IPC_BASE_ADDR 0x80400 /* SeC IPC Base Address */
+
+/* IPC Input Doorbell Register */
+#define SEC_IPC_INPUT_DOORBELL_REG (0x0000 + IPC_BASE_ADDR)
+
+/* IPC Input Status Register
+ * This register indicates whether or not processing of
+ * the most recent command has been completed by the SEC
+ * New commands and payloads should not be written by the Host
+ * until this indicates that the previous command has been processed.
+ */
+#define SEC_IPC_INPUT_STATUS_REG (0x0008 + IPC_BASE_ADDR)
+# define SEC_IPC_INPUT_STATUS_RDY BIT(0)
+
+/* IPC Host Interrupt Status Register */
+#define SEC_IPC_HOST_INT_STATUS_REG (0x0010 + IPC_BASE_ADDR)
+#define SEC_IPC_HOST_INT_STATUS_OUT_DB BIT(0)
+#define SEC_IPC_HOST_INT_STATUS_IN_RDY BIT(1)
+#define SEC_IPC_HOST_INT_STATUS_HDCP_M0_RCVD BIT(5)
+#define SEC_IPC_HOST_INT_STATUS_ILL_MEM_ACCESS BIT(17)
+#define SEC_IPC_HOST_INT_STATUS_AES_HKEY_ERR BIT(18)
+#define SEC_IPC_HOST_INT_STATUS_DES_HKEY_ERR BIT(19)
+#define SEC_IPC_HOST_INT_STATUS_TMRMTB_OVERFLOW BIT(21)
+
+/* Convenient mask for pending interrupts */
+#define SEC_IPC_HOST_INT_STATUS_PENDING \
+ (SEC_IPC_HOST_INT_STATUS_OUT_DB| \
+ SEC_IPC_HOST_INT_STATUS_IN_RDY)
+
+/* IPC Host Interrupt Mask Register */
+#define SEC_IPC_HOST_INT_MASK_REG (0x0014 + IPC_BASE_ADDR)
+
+# define SEC_IPC_HOST_INT_MASK_OUT_DB BIT(0) /* Output Doorbell Int Mask */
+# define SEC_IPC_HOST_INT_MASK_IN_RDY BIT(1) /* Input Ready Int Mask */
+
+/* IPC Input Payload RAM */
+#define SEC_IPC_INPUT_PAYLOAD_REG (0x0100 + IPC_BASE_ADDR)
+/* IPC Shared Payload RAM */
+#define IPC_SHARED_PAYLOAD_REG (0x0200 + IPC_BASE_ADDR)
+
+/* SeC Address Translation Table Entry 2 - Ctrl
+ *
+ * This register resides also in SeC's PCI-E Memory space.
+ */
+#define SATT2_CTRL_REG 0x1040
+# define SATT2_CTRL_VALID_MSK BIT(0)
+# define SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT 8
+# define SATT2_CTRL_BRIDGE_HOST_EN_MSK BIT(12)
+
+/* SATT Table Entry 2 SAP Base Address Register */
+#define SATT2_SAP_BA_REG 0x1044
+/* SATT Table Entry 2 SAP Size Register. */
+#define SATT2_SAP_SIZE_REG 0x1048
+ /* SATT Table Entry 2 SAP Bridge Address - LSB Register */
+#define SATT2_BRG_BA_LSB_REG 0x104C
+
+/* Host High-level Interrupt Status Register */
+#define HHISR_REG 0x2020
+/* Host High-level Interrupt Enable Register
+ *
+ * Resides in PCI memory space. This is the top hierarchy for
+ * interrupts from SeC to host, aggregating both interrupts that
+ * arrive through HICR registers as well as interrupts
+ * that arrive via IPC.
+ */
+#define HHIER_REG 0x2024
+#define IPC_HHIER_SEC BIT(0)
+#define IPC_HHIER_BRIDGE BIT(1)
+#define IPC_HHIER_MSK (IPC_HHIER_SEC | IPC_HHIER_BRIDGE)
+
+/* Host High-level Interrupt Mask Register.
+ *
+ * Resides in PCI memory space.
+ * This is the top hierarchy for masking interrupts from SeC to host.
+ */
+#define HHIMR_REG 0x2028
+#define IPC_HHIMR_SEC BIT(0)
+#define IPC_HHIMR_BRIDGE BIT(1)
+
+/* Host High-level IRQ Status Register */
+#define HHIRQSR_REG 0x202C
+
+/* Host Interrupt Cause Register 0 - SeC IPC Readiness
+ *
+ * This register is both an ICR to Host from PCI Memory Space
+ * and it is also exposed in the SeC memory space.
+ * This register is used by SeC's IPC driver in order
+ * to synchronize with host about IPC interface state.
+ */
+#define HICR_SEC_IPC_READINESS_REG 0x2040
+#define HICR_SEC_IPC_READINESS_HOST_RDY BIT(0)
+#define HICR_SEC_IPC_READINESS_SEC_RDY BIT(1)
+#define HICR_SEC_IPC_READINESS_SYS_RDY \
+ (HICR_SEC_IPC_READINESS_HOST_RDY | \
+ HICR_SEC_IPC_READINESS_SEC_RDY)
+#define HICR_SEC_IPC_READINESS_RDY_CLR BIT(2)
+
+/* Host Interrupt Cause Register 1 - Aliveness Response */
+/* This register is both an ICR to Host from PCI Memory Space
+ * and it is also exposed in the SeC memory space.
+ * The register may be used by SeC to ACK a host request for aliveness.
+ */
+#define HICR_HOST_ALIVENESS_RESP_REG 0x2044
+#define HICR_HOST_ALIVENESS_RESP_ACK BIT(0)
+
+/* Host Interrupt Cause Register 2 - SeC IPC Output Doorbell */
+#define HICR_SEC_IPC_OUTPUT_DOORBELL_REG 0x2048
+
+/* Host Interrupt Status Register.
+ *
+ * Resides in PCI memory space.
+ * This is the main register involved in generating interrupts
+ * from SeC to host via HICRs.
+ * The interrupt generation rules are as follows:
+ * An interrupt will be generated whenever for any i,
+ * there is a transition from a state where at least one of
+ * the following conditions did not hold, to a state where
+ * ALL the following conditions hold:
+ * A) HISR.INT[i]_STS == 1.
+ * B) HIER.INT[i]_EN == 1.
+ */
+#define HISR_REG 0x2060
+#define HISR_INT_0_STS BIT(0)
+#define HISR_INT_1_STS BIT(1)
+#define HISR_INT_2_STS BIT(2)
+#define HISR_INT_3_STS BIT(3)
+#define HISR_INT_4_STS BIT(4)
+#define HISR_INT_5_STS BIT(5)
+#define HISR_INT_6_STS BIT(6)
+#define HISR_INT_7_STS BIT(7)
+#define HISR_INT_STS_MSK \
+ (HISR_INT_0_STS | HISR_INT_1_STS | HISR_INT_2_STS)
+
+/* Host Interrupt Enable Register. Resides in PCI memory space. */
+#define HIER_REG 0x2064
+#define HIER_INT_0_EN BIT(0)
+#define HIER_INT_1_EN BIT(1)
+#define HIER_INT_2_EN BIT(2)
+#define HIER_INT_3_EN BIT(3)
+#define HIER_INT_4_EN BIT(4)
+#define HIER_INT_5_EN BIT(5)
+#define HIER_INT_6_EN BIT(6)
+#define HIER_INT_7_EN BIT(7)
+
+#define HIER_INT_EN_MSK \
+ (HIER_INT_0_EN | HIER_INT_1_EN | HIER_INT_2_EN)
+
+
+/* SEC Memory Space IPC output payload.
+ *
+ * This register is part of the output payload which SEC provides to host.
+ */
+#define BRIDGE_IPC_OUTPUT_PAYLOAD_REG 0x20C0
+
+/* SeC Interrupt Cause Register - Host Aliveness Request
+ * This register is both an ICR to SeC and it is also exposed
+ * in the host-visible PCI memory space.
+ * The register is used by host to request SeC aliveness.
+ */
+#define SICR_HOST_ALIVENESS_REQ_REG 0x214C
+#define SICR_HOST_ALIVENESS_REQ_REQUESTED BIT(0)
+
+
+/* SeC Interrupt Cause Register - Host IPC Readiness
+ *
+ * This register is both an ICR to SeC and it is also exposed
+ * in the host-visible PCI memory space.
+ * This register is used by the host's SeC driver uses in order
+ * to synchronize with SeC about IPC interface state.
+ */
+#define SICR_HOST_IPC_READINESS_REQ_REG 0x2150
+
+
+#define SICR_HOST_IPC_READINESS_HOST_RDY BIT(0)
+#define SICR_HOST_IPC_READINESS_SEC_RDY BIT(1)
+#define SICR_HOST_IPC_READINESS_SYS_RDY \
+ (SICR_HOST_IPC_READINESS_HOST_RDY | \
+ SICR_HOST_IPC_READINESS_SEC_RDY)
+#define SICR_HOST_IPC_READINESS_RDY_CLR BIT(2)
+
+/* SeC Interrupt Cause Register - SeC IPC Output Status
+ *
+ * This register indicates whether or not processing of the most recent
+ * command has been completed by the Host.
+ * New commands and payloads should not be written by SeC until this
+ * register indicates that the previous command has been processed.
+ */
+#define SICR_SEC_IPC_OUTPUT_STATUS_REG 0x2154
+# define SEC_IPC_OUTPUT_STATUS_RDY BIT(0)
+
+
+
+/* MEI IPC Message payload size 64 bytes */
+#define PAYLOAD_SIZE 64
+
+/* MAX size for SATT range 32MB */
+#define SATT_RANGE_MAX (32 << 20)
+
+
+#endif /* _MEI_HW_TXE_REGS_H_ */
+
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
new file mode 100644
index 0000000..19579e5
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.c
@@ -0,0 +1,1106 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+#include "client.h"
+#include "hbm.h"
+
+/**
+ * mei_txe_reg_read - Reads 32bit data from the device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ *
+ */
+static inline u32 mei_txe_reg_read(void __iomem *base_addr,
+ unsigned long offset)
+{
+ return ioread32(base_addr + offset);
+}
+
+/**
+ * mei_txe_reg_write - Writes 32bit data to the device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ * @value: the value to write
+ */
+static inline void mei_txe_reg_write(void __iomem *base_addr,
+ unsigned long offset, u32 value)
+{
+ iowrite32(value, base_addr + offset);
+}
+
+/**
+ * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ *
+ * Doesn't check for aliveness while Reads 32bit data from the SeC BAR
+ */
+static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[SEC_BAR], offset);
+}
+
+/**
+ * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ *
+ * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ WARN(!hw->aliveness, "sec read: aliveness not asserted\n");
+ return mei_txe_sec_reg_read_silent(hw, offset);
+}
+/**
+ * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR
+ * doesn't check for aliveness
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Doesn't check for aliveness while writes 32bit data from to the SeC BAR
+ */
+static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[SEC_BAR], offset, value);
+}
+
+/**
+ * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Writes 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ WARN(!hw->aliveness, "sec write: aliveness not asserted\n");
+ mei_txe_sec_reg_write_silent(hw, offset, value);
+}
+/**
+ * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR
+ *
+ * @hw: the device structure
+ * @offset: offset from which to read the data
+ *
+ */
+static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[BRIDGE_BAR], offset);
+}
+
+/**
+ * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR
+ *
+ * @hw: the device structure
+ * @offset: offset from which to write the data
+ * @value: the byte to write
+ */
+static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[BRIDGE_BAR], offset, value);
+}
+
+/**
+ * mei_txe_aliveness_set - request for aliveness change
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Request for aliveness change and returns true if the change is
+ * really needed and false if aliveness is already
+ * in the requested state
+ * Requires device lock to be held
+ */
+static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool do_req = hw->aliveness != req;
+
+ dev_dbg(&dev->pdev->dev, "Aliveness current=%d request=%d\n",
+ hw->aliveness, req);
+ if (do_req) {
+ hw->recvd_aliveness = false;
+ mei_txe_br_reg_write(hw, SICR_HOST_ALIVENESS_REQ_REG, req);
+ }
+ return do_req;
+}
+
+
+/**
+ * mei_txe_aliveness_req_get - get aliveness requested register value
+ *
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
+ * from HICR_HOST_ALIVENESS_REQ register value
+ */
+static u32 mei_txe_aliveness_req_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+ reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG);
+ return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED;
+}
+
+/**
+ * mei_txe_aliveness_get - get aliveness response register value
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit
+ * from HICR_HOST_ALIVENESS_RESP register value
+ */
+static u32 mei_txe_aliveness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+ reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG);
+ return reg & HICR_HOST_ALIVENESS_RESP_ACK;
+}
+
+/**
+ * mei_txe_aliveness_poll - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ * returns > 0 if the expected value was received, -ETIME otherwise
+ */
+static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int t = 0;
+
+ do {
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected) {
+ dev_dbg(&dev->pdev->dev,
+ "aliveness settled after %d msecs\n", t);
+ return t;
+ }
+ mutex_unlock(&dev->device_lock);
+ msleep(MSEC_PER_SEC / 5);
+ mutex_lock(&dev->device_lock);
+ t += MSEC_PER_SEC / 5;
+ } while (t < SEC_ALIVENESS_WAIT_TIMEOUT);
+
+ dev_err(&dev->pdev->dev, "aliveness timed out\n");
+ return -ETIME;
+}
+
+/**
+ * mei_txe_aliveness_wait - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ * returns returns 0 on success and < 0 otherwise
+ */
+static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ const unsigned long timeout =
+ msecs_to_jiffies(SEC_ALIVENESS_WAIT_TIMEOUT);
+ long err;
+ int ret;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected)
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ err = wait_event_timeout(hw->wait_aliveness,
+ hw->recvd_aliveness, timeout);
+ mutex_lock(&dev->device_lock);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ ret = hw->aliveness == expected ? 0 : -ETIME;
+
+ if (ret)
+ dev_err(&dev->pdev->dev, "aliveness timed out");
+ else
+ dev_dbg(&dev->pdev->dev, "aliveness settled after %d msecs\n",
+ jiffies_to_msecs(timeout - err));
+ hw->recvd_aliveness = false;
+ return ret;
+}
+
+/**
+ * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete
+ *
+ * @dev: the device structure
+ *
+ * returns returns 0 on success and < 0 otherwise
+ */
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req)
+{
+ if (mei_txe_aliveness_set(dev, req))
+ return mei_txe_aliveness_wait(dev, req);
+ return 0;
+}
+
+/**
+ * mei_txe_input_ready_interrupt_enable - sets the Input Ready Interrupt
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hintmsk;
+ /* Enable the SEC_IPC_HOST_INT_MASK_IN_RDY interrupt */
+ hintmsk = mei_txe_sec_reg_read(hw, SEC_IPC_HOST_INT_MASK_REG);
+ hintmsk |= SEC_IPC_HOST_INT_MASK_IN_RDY;
+ mei_txe_sec_reg_write(hw, SEC_IPC_HOST_INT_MASK_REG, hintmsk);
+}
+
+/**
+ * mei_txe_input_doorbell_set
+ * - Sets bit 0 in SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL.
+ * @dev: the device structure
+ */
+static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw)
+{
+ /* Clear the interrupt cause */
+ clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_DOORBELL_REG, 1);
+}
+
+/**
+ * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_output_ready_set(struct mei_txe_hw *hw)
+{
+ mei_txe_br_reg_write(hw,
+ SICR_SEC_IPC_OUTPUT_STATUS_REG,
+ SEC_IPC_OUTPUT_STATUS_RDY);
+}
+
+/**
+ * mei_txe_is_input_ready - check if TXE is ready for receiving data
+ *
+ * @dev: the device structure
+ */
+static bool mei_txe_is_input_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 status;
+ status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG);
+ return !!(SEC_IPC_INPUT_STATUS_RDY & status);
+}
+
+/**
+ * mei_txe_intr_clear - clear all interrupts
+ *
+ * @dev: the device structure
+ */
+static inline void mei_txe_intr_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG,
+ SEC_IPC_HOST_INT_STATUS_PENDING);
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK);
+ mei_txe_br_reg_write(hw, HHISR_REG, IPC_HHIER_MSK);
+}
+
+/**
+ * mei_txe_intr_disable - disable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_disable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, HHIER_REG, 0);
+ mei_txe_br_reg_write(hw, HIER_REG, 0);
+}
+/**
+ * mei_txe_intr_disable - enable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK);
+ mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK);
+}
+
+/**
+ * mei_txe_pending_interrupts - check if there are pending interrupts
+ * only Aliveness, Input ready, and output doorbell are of relevance
+ *
+ * @dev: the device structure
+ *
+ * Checks if there are pending interrupts
+ * only Aliveness, Readiness, Input ready, and Output doorbell are relevant
+ */
+static bool mei_txe_pending_interrupts(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool ret = (hw->intr_cause & (TXE_INTR_READINESS |
+ TXE_INTR_ALIVENESS |
+ TXE_INTR_IN_READY |
+ TXE_INTR_OUT_DB));
+
+ if (ret) {
+ dev_dbg(&dev->pdev->dev,
+ "Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n",
+ !!(hw->intr_cause & TXE_INTR_IN_READY),
+ !!(hw->intr_cause & TXE_INTR_READINESS),
+ !!(hw->intr_cause & TXE_INTR_ALIVENESS),
+ !!(hw->intr_cause & TXE_INTR_OUT_DB));
+ }
+ return ret;
+}
+
+/**
+ * mei_txe_input_payload_write - write a dword to the host buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the host buffer
+ * @value: value
+ */
+static void mei_txe_input_payload_write(struct mei_device *dev,
+ unsigned long idx, u32 value)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG +
+ (idx * sizeof(u32)), value);
+}
+
+/**
+ * mei_txe_out_data_read - read dword from the device buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the device buffer
+ *
+ * returns register value at index
+ */
+static u32 mei_txe_out_data_read(const struct mei_device *dev,
+ unsigned long idx)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return mei_txe_br_reg_read(hw,
+ BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32)));
+}
+
+/* Readiness */
+
+/**
+ * mei_txe_readiness_set_host_rdy
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_set_host_rdy(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw,
+ SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_clear
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_RDY_CLR);
+}
+/**
+ * mei_txe_readiness_get - Reads and returns
+ * the HICR_SEC_IPC_READINESS register value
+ *
+ * @dev: the device structure
+ */
+static u32 mei_txe_readiness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+}
+
+
+/**
+ * mei_txe_readiness_is_sec_rdy - check readiness
+ * for HICR_SEC_IPC_READINESS_SEC_RDY
+ *
+ * @readiness - cached readiness state
+ */
+static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness)
+{
+ return !!(readiness & HICR_SEC_IPC_READINESS_SEC_RDY);
+}
+
+/**
+ * mei_txe_hw_is_ready - check if the hw is ready
+ *
+ * @dev: the device structure
+ */
+static bool mei_txe_hw_is_ready(struct mei_device *dev)
+{
+ u32 readiness = mei_txe_readiness_get(dev);
+ return mei_txe_readiness_is_sec_rdy(readiness);
+}
+
+/**
+ * mei_txe_host_is_ready - check if the host is ready
+ *
+ * @dev: the device structure
+ */
+static inline bool mei_txe_host_is_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+ return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_wait - wait till readiness settles
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success and -ETIME on timeout
+ */
+static int mei_txe_readiness_wait(struct mei_device *dev)
+{
+ if (mei_txe_hw_is_ready(dev))
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_hw_ready, dev->recvd_hw_ready,
+ msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+ if (!dev->recvd_hw_ready) {
+ dev_err(&dev->pdev->dev, "wait for readiness failed\n");
+ return -ETIME;
+ }
+
+ dev->recvd_hw_ready = false;
+ return 0;
+}
+
+/**
+ * mei_txe_hw_config - configure hardware at the start of the devices
+ *
+ * @dev: the device structure
+ *
+ * Configure hardware at the start of the device should be done only
+ * once at the device probe time
+ */
+static void mei_txe_hw_config(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ /* Doesn't change in runtime */
+ dev->hbuf_depth = PAYLOAD_SIZE / 4;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ dev_dbg(&dev->pdev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
+ hw->aliveness, hw->readiness);
+}
+
+
+/**
+ * mei_txe_write - writes a message to device.
+ *
+ * @dev: the device structure
+ * @header: header of message
+ * @buf: message buffer will be written
+ * returns 1 if success, 0 - otherwise.
+ */
+
+static int mei_txe_write(struct mei_device *dev,
+ struct mei_msg_hdr *header, unsigned char *buf)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ unsigned long rem;
+ unsigned long length;
+ u32 *reg_buf = (u32 *)buf;
+ int i;
+
+ if (WARN_ON(!header || !buf))
+ return -EINVAL;
+
+ length = header->length;
+
+ dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
+
+ if ((length + sizeof(struct mei_msg_hdr)) > PAYLOAD_SIZE) {
+ dev_err(&dev->pdev->dev, "write length exceeded = %ld > %d\n",
+ length + sizeof(struct mei_msg_hdr), PAYLOAD_SIZE);
+ return -ERANGE;
+ }
+
+ if (WARN(!hw->aliveness, "txe write: aliveness not asserted\n"))
+ return -EAGAIN;
+
+ /* Enable Input Ready Interrupt. */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+ if (!mei_txe_is_input_ready(dev)) {
+ dev_err(&dev->pdev->dev, "Input is not ready");
+ return -EAGAIN;
+ }
+
+ mei_txe_input_payload_write(dev, 0, *((u32 *)header));
+
+ for (i = 0; i < length / 4; i++)
+ mei_txe_input_payload_write(dev, i + 1, reg_buf[i]);
+
+ rem = length & 0x3;
+ if (rem > 0) {
+ u32 reg = 0;
+ memcpy(®, &buf[length - rem], rem);
+ mei_txe_input_payload_write(dev, i + 1, reg);
+ }
+
+ dev->hbuf_is_ready = false;
+ /* Set Input-Doorbell */
+ mei_txe_input_doorbell_set(hw);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hbuf_max_len - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns the PAYLOAD_SIZE - 4
+ */
+static size_t mei_txe_hbuf_max_len(const struct mei_device *dev)
+{
+ return PAYLOAD_SIZE - sizeof(struct mei_msg_hdr);
+}
+
+/**
+ * mei_txe_hbuf_empty_slots - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns always hbuf_depth
+ */
+static int mei_txe_hbuf_empty_slots(struct mei_device *dev)
+{
+ return dev->hbuf_depth;
+}
+
+/**
+ * mei_txe_count_full_read_slots - mimics the me device circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns always buffer size in dwords count
+ */
+static int mei_txe_count_full_read_slots(struct mei_device *dev)
+{
+ /* read buffers has static size */
+ return PAYLOAD_SIZE / 4;
+}
+
+/**
+ * mei_txe_read_hdr - read message header which is always in 4 first bytes
+ *
+ * @dev: the device structure
+ *
+ * returns mei message header
+ */
+
+static u32 mei_txe_read_hdr(const struct mei_device *dev)
+{
+ return mei_txe_out_data_read(dev, 0);
+}
+/**
+ * mei_txe_read - reads a message from the txe device.
+ *
+ * @dev: the device structure
+ * @buf: message buffer will be written
+ * @len: message size will be read
+ *
+ * returns -EINVAL on error wrong argument and 0 on success
+ */
+static int mei_txe_read(struct mei_device *dev,
+ unsigned char *buf, unsigned long len)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 i;
+ u32 *reg_buf = (u32 *)buf;
+ u32 rem = len & 0x3;
+
+ if (WARN_ON(!buf || !len))
+ return -EINVAL;
+
+ dev_dbg(&dev->pdev->dev,
+ "buffer-length = %lu buf[0]0x%08X\n",
+ len, mei_txe_out_data_read(dev, 0));
+
+ for (i = 0; i < len / 4; i++) {
+ /* skip header: index starts from 1 */
+ u32 reg = mei_txe_out_data_read(dev, i + 1);
+ dev_dbg(&dev->pdev->dev, "buf[%d] = 0x%08X\n", i, reg);
+ *reg_buf++ = reg;
+ }
+
+ if (rem) {
+ u32 reg = mei_txe_out_data_read(dev, i + 1);
+ memcpy(reg_buf, ®, rem);
+ }
+
+ mei_txe_output_ready_set(hw);
+ return 0;
+}
+
+/**
+ * mei_txe_hw_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * returns 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 aliveness_req;
+ /*
+ * read input doorbell to ensure consistency between Bridge and SeC
+ * return value might be garbage return
+ */
+ (void)mei_txe_sec_reg_read_silent(hw, SEC_IPC_INPUT_DOORBELL_REG);
+
+ aliveness_req = mei_txe_aliveness_req_get(dev);
+ hw->aliveness = mei_txe_aliveness_get(dev);
+
+ /* Disable interrupts in this stage we will poll */
+ mei_txe_intr_disable(dev);
+
+ /*
+ * If Aliveness Request and Aliveness Response are not equal then
+ * wait for them to be equal
+ * Since we might have interrupts disabled - poll for it
+ */
+ if (aliveness_req != hw->aliveness)
+ if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait for aliveness settle failed ... bailing out\n");
+ return -EIO;
+ }
+
+ /*
+ * If Aliveness Request and Aliveness Response are set then clear them
+ */
+ if (aliveness_req) {
+ mei_txe_aliveness_set(dev, 0);
+ if (mei_txe_aliveness_poll(dev, 0) < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait for aliveness failed ... bailing out\n");
+ return -EIO;
+ }
+ }
+
+ /*
+ * Set rediness RDY_CLR bit
+ */
+ mei_txe_readiness_clear(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hw_start - start the hardware after reset
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_start(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int ret;
+
+ u32 hisr;
+
+ /* bring back interrupts */
+ mei_txe_intr_enable(dev);
+
+ ret = mei_txe_readiness_wait(dev);
+ if (ret < 0) {
+ dev_err(&dev->pdev->dev, "wating for readiness failed\n");
+ return ret;
+ }
+
+ /*
+ * If HISR.INT2_STS interrupt status bit is set then clear it.
+ */
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+ if (hisr & HISR_INT_2_STS)
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_2_STS);
+
+ /* Clear the interrupt cause of OutputDoorbell */
+ clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause);
+
+ ret = mei_txe_aliveness_set_sync(dev, 1);
+ if (ret < 0) {
+ dev_err(&dev->pdev->dev, "wait for aliveness failed ... bailing out\n");
+ return ret;
+ }
+
+ /* enable input ready interrupts:
+ * SEC_IPC_HOST_INT_MASK.IPC_INPUT_READY_INT_MASK
+ */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+
+ /* Set the SICR_SEC_IPC_OUTPUT_STATUS.IPC_OUTPUT_READY bit */
+ mei_txe_output_ready_set(hw);
+
+ /* Set bit SICR_HOST_IPC_READINESS.HOST_RDY
+ */
+ mei_txe_readiness_set_host_rdy(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_check_and_ack_intrs - translate multi BAR interrupt into
+ * single bit mask and acknowledge the interrupts
+ *
+ * @dev: the device structure
+ * @do_ack: acknowledge interrupts
+ */
+static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hisr;
+ u32 hhisr;
+ u32 ipc_isr;
+ u32 aliveness;
+ bool generated;
+
+ /* read interrupt registers */
+ hhisr = mei_txe_br_reg_read(hw, HHISR_REG);
+ generated = (hhisr & IPC_HHIER_MSK);
+ if (!generated)
+ goto out;
+
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+
+ aliveness = mei_txe_aliveness_get(dev);
+ if (hhisr & IPC_HHIER_SEC && aliveness)
+ ipc_isr = mei_txe_sec_reg_read_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG);
+ else
+ ipc_isr = 0;
+
+ generated = generated ||
+ (hisr & HISR_INT_STS_MSK) ||
+ (ipc_isr & SEC_IPC_HOST_INT_STATUS_PENDING);
+
+ if (generated && do_ack) {
+ /* Save the interrupt causes */
+ hw->intr_cause |= hisr & HISR_INT_STS_MSK;
+ if (ipc_isr & SEC_IPC_HOST_INT_STATUS_IN_RDY)
+ hw->intr_cause |= TXE_INTR_IN_READY;
+
+
+ mei_txe_intr_disable(dev);
+ /* Clear the interrupts in hierarchy:
+ * IPC and Bridge, than the High Level */
+ mei_txe_sec_reg_write_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG, ipc_isr);
+ mei_txe_br_reg_write(hw, HISR_REG, hisr);
+ mei_txe_br_reg_write(hw, HHISR_REG, hhisr);
+ }
+
+out:
+ return generated;
+}
+
+/**
+ * mei_txe_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * returns irqreturn_t
+ */
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = dev_id;
+
+ if (mei_txe_check_and_ack_intrs(dev, true))
+ return IRQ_WAKE_THREAD;
+ return IRQ_NONE;
+}
+
+
+/**
+ * mei_txe_irq_thread_handler - txe interrupt thread
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * returns irqreturn_t
+ *
+ */
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *) dev_id;
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ struct mei_cl_cb complete_list;
+ s32 slots;
+ int rets = 0;
+
+ dev_dbg(&dev->pdev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
+ mei_txe_br_reg_read(hw, HHISR_REG),
+ mei_txe_br_reg_read(hw, HISR_REG),
+ mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG));
+
+
+ /* initialize our complete list */
+ mutex_lock(&dev->device_lock);
+ mei_io_list_init(&complete_list);
+
+ if (pci_dev_msi_enabled(dev->pdev))
+ mei_txe_check_and_ack_intrs(dev, true);
+
+ /* show irq events */
+ mei_txe_pending_interrupts(dev);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ /* Readiness:
+ * Detection of TXE driver going through reset
+ * or TXE driver resetting the HECI interface.
+ */
+ if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) {
+ dev_dbg(&dev->pdev->dev, "Readiness Interrupt was received...\n");
+
+ /* Check if SeC is going through reset */
+ if (mei_txe_readiness_is_sec_rdy(hw->readiness)) {
+ dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");
+ dev->recvd_hw_ready = true;
+ } else {
+ dev->recvd_hw_ready = false;
+ if (dev->dev_state != MEI_DEV_RESETTING) {
+
+ dev_warn(&dev->pdev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
+
+ }
+ }
+ wake_up(&dev->wait_hw_ready);
+ }
+
+ /************************************************************/
+ /* Check interrupt cause:
+ * Aliveness: Detection of SeC acknowledge of host request that
+ * it remain alive or host cancellation of that request.
+ */
+
+ if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) {
+ /* Clear the interrupt cause */
+ dev_dbg(&dev->pdev->dev,
+ "Aliveness Interrupt: Status: %d\n", hw->aliveness);
+ hw->recvd_aliveness = true;
+ if (waitqueue_active(&hw->wait_aliveness))
+ wake_up(&hw->wait_aliveness);
+ }
+
+
+ /* Output Doorbell:
+ * Detection of SeC having sent output to host
+ */
+ slots = mei_count_full_read_slots(dev);
+ if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) {
+ /* Read from TXE */
+ rets = mei_irq_read_handler(dev, &complete_list, &slots);
+ if (rets && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_err(&dev->pdev->dev,
+ "mei_irq_read_handler ret = %d.\n", rets);
+
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+ }
+ /* Input Ready: Detection if host can write to SeC */
+ if (test_and_clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause))
+ dev->hbuf_is_ready = true;
+
+ if (hw->aliveness && dev->hbuf_is_ready) {
+ /* if SeC did not complete reading the written data by host */
+ if (!mei_txe_is_input_ready(dev)) {
+ dev_dbg(&dev->pdev->dev, "got Input Ready Int, but SEC_IPC_INPUT_STATUS_RDY is 0.\n");
+ goto end;
+ }
+
+ rets = mei_irq_write_handler(dev, &complete_list);
+ if (rets)
+ dev_err(&dev->pdev->dev,
+ "mei_irq_write_handler ret = %d.\n", rets);
+ }
+
+
+
+ mei_irq_compl_handler(dev, &complete_list);
+
+end:
+ dev_dbg(&dev->pdev->dev, "interrupt thread end ret = %d\n", rets);
+
+ mutex_unlock(&dev->device_lock);
+
+ mei_enable_interrupts(dev);
+ return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_txe_hw_ops = {
+
+ .host_is_ready = mei_txe_host_is_ready,
+
+ .hw_is_ready = mei_txe_hw_is_ready,
+ .hw_reset = mei_txe_hw_reset,
+ .hw_config = mei_txe_hw_config,
+ .hw_start = mei_txe_hw_start,
+
+ .intr_clear = mei_txe_intr_clear,
+ .intr_enable = mei_txe_intr_enable,
+ .intr_disable = mei_txe_intr_disable,
+
+ .hbuf_free_slots = mei_txe_hbuf_empty_slots,
+ .hbuf_is_ready = mei_txe_is_input_ready,
+ .hbuf_max_len = mei_txe_hbuf_max_len,
+
+ .write = mei_txe_write,
+
+ .rdbuf_full_slots = mei_txe_count_full_read_slots,
+ .read_hdr = mei_txe_read_hdr,
+
+ .read = mei_txe_read,
+
+};
+
+/**
+ * mei_txe_dev_init - allocates and initializes txe hardware specific structure
+ *
+ * @pdev - pci device
+ * returns struct mei_device * on success or NULL;
+ *
+ */
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+
+ dev = kzalloc(sizeof(struct mei_device) +
+ sizeof(struct mei_txe_hw), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ mei_device_init(dev);
+
+ hw = to_txe_hw(dev);
+
+ init_waitqueue_head(&hw->wait_aliveness);
+
+ dev->ops = &mei_txe_hw_ops;
+
+ dev->pdev = pdev;
+ return dev;
+}
+
+/**
+ * mei_txe_setup_satt2 - SATT2 configuration for DMA support.
+ *
+ * @dev: the device structure
+ * @addr: physical address start of the range
+ * @range: physical range size
+ */
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 lo32 = lower_32_bits(addr);
+ u32 hi32 = upper_32_bits(addr);
+ u32 ctrl;
+
+ /* SATT is limited to 36 Bits */
+ if (hi32 & ~0xF)
+ return -EINVAL;
+
+ /* SATT has to be 16Byte aligned */
+ if (lo32 & 0xF)
+ return -EINVAL;
+
+ /* SATT range has to be 4Bytes aligned */
+ if (range & 0x4)
+ return -EINVAL;
+
+ /* SATT is limited to 32 MB range*/
+ if (range > SATT_RANGE_MAX)
+ return -EINVAL;
+
+ ctrl = SATT2_CTRL_VALID_MSK;
+ ctrl |= hi32 << SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT;
+
+ mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range);
+ mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32);
+ mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl);
+ dev_dbg(&dev->pdev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
+ range, lo32, ctrl);
+
+ return 0;
+}
diff --git a/drivers/misc/mei/hw-txe.h b/drivers/misc/mei/hw-txe.h
new file mode 100644
index 0000000..857d88c
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.h
@@ -0,0 +1,71 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _MEI_HW_TXE_H_
+#define _MEI_HW_TXE_H_
+
+#include "hw.h"
+#include "hw-txe-regs.h"
+
+/* Flatten Hierarchy interrupt cause */
+#define TXE_INTR_READINESS_BIT 0 /* HISR_INT_0_STS */
+#define TXE_INTR_READINESS HISR_INT_0_STS
+#define TXE_INTR_ALIVENESS_BIT 1 /* HISR_INT_1_STS */
+#define TXE_INTR_ALIVENESS HISR_INT_1_STS
+#define TXE_INTR_OUT_DB_BIT 2 /* HISR_INT_2_STS */
+#define TXE_INTR_OUT_DB HISR_INT_2_STS
+#define TXE_INTR_IN_READY_BIT 8 /* beyond HISR */
+#define TXE_INTR_IN_READY BIT(8)
+
+/**
+ * struct mei_txe_hw - txe hardware specifics
+ *
+ * @mem_addr: SeC and BRIDGE bars
+ * @aliveness: aliveness (power gating) state of the hardware
+ * @readiness: readiness state of the hardware
+ * @wait_aliveness: aliveness wait queue
+ * @recvd_aliveness: aliveness interrupt was recived
+ * @intr_cause: translated interrupt cause
+ */
+struct mei_txe_hw {
+ void __iomem *mem_addr[NUM_OF_MEM_BARS];
+ u32 aliveness;
+ u32 readiness;
+
+ wait_queue_head_t wait_aliveness;
+ bool recvd_aliveness;
+
+ unsigned long intr_cause;
+};
+
+#define to_txe_hw(dev) (struct mei_txe_hw *)((dev)->hw)
+
+static inline struct mei_device *hw_txe_to_mei(struct mei_txe_hw *hw)
+{
+ return container_of((void *)hw, struct mei_device, hw);
+}
+
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev);
+
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id);
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id);
+
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req);
+
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range);
+
+
+#endif /* _MEI_HW_TXE_H_ */
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index dd44e33..e06779d 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -22,7 +22,7 @@
/*
* Timeouts in Seconds
*/
-#define MEI_INTEROP_TIMEOUT 7 /* Timeout on ready message */
+#define MEI_HW_READY_TIMEOUT 2 /* Timeout on ready message */
#define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */
#define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */
@@ -31,13 +31,13 @@
#define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */
#define MEI_IAMTHIF_READ_TIMER 10 /* HPS */
+#define MEI_HBM_TIMEOUT 1 /* 1 second */
/*
* MEI Version
*/
#define HBM_MINOR_VERSION 0
#define HBM_MAJOR_VERSION 1
-#define HBM_TIMEOUT 1 /* 1 second */
/* Host bus message command opcode */
#define MEI_HBM_CMD_OP_MSK 0x7f
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index cdd31c2..214dcef 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -116,7 +116,6 @@
mei_cl_unlink(&dev->wd_cl);
mei_cl_unlink(&dev->iamthif_cl);
mei_amthif_reset_params(dev);
- memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
}
@@ -126,7 +125,6 @@
if (ret) {
dev_err(&dev->pdev->dev, "hw_reset failed ret = %d\n", ret);
- dev->dev_state = MEI_DEV_DISABLED;
return ret;
}
@@ -139,7 +137,6 @@
ret = mei_hw_start(dev);
if (ret) {
dev_err(&dev->pdev->dev, "hw_start failed ret = %d\n", ret);
- dev->dev_state = MEI_DEV_DISABLED;
return ret;
}
@@ -149,7 +146,7 @@
ret = mei_hbm_start_req(dev);
if (ret) {
dev_err(&dev->pdev->dev, "hbm_start failed ret = %d\n", ret);
- dev->dev_state = MEI_DEV_DISABLED;
+ dev->dev_state = MEI_DEV_RESETTING;
return ret;
}
@@ -166,6 +163,7 @@
*/
int mei_start(struct mei_device *dev)
{
+ int ret;
mutex_lock(&dev->device_lock);
/* acknowledge interrupt and stop interrupts */
@@ -175,10 +173,18 @@
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
- dev->dev_state = MEI_DEV_INITIALIZING;
dev->reset_count = 0;
- mei_reset(dev);
+ do {
+ dev->dev_state = MEI_DEV_INITIALIZING;
+ ret = mei_reset(dev);
+ if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "reset failed ret = %d", ret);
+ goto err;
+ }
+ } while (ret);
+
+ /* we cannot start the device w/o hbm start message completed */
if (dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "reset failed");
goto err;
@@ -238,27 +244,40 @@
mutex_unlock(&dev->device_lock);
- if (err || dev->dev_state == MEI_DEV_DISABLED)
+ if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "device disabled = %d\n", err);
return -ENODEV;
+ }
+
+ /* try to start again */
+ if (err)
+ schedule_work(&dev->reset_work);
+
return 0;
}
EXPORT_SYMBOL_GPL(mei_restart);
-
static void mei_reset_work(struct work_struct *work)
{
struct mei_device *dev =
container_of(work, struct mei_device, reset_work);
+ int ret;
mutex_lock(&dev->device_lock);
- mei_reset(dev);
+ ret = mei_reset(dev);
mutex_unlock(&dev->device_lock);
- if (dev->dev_state == MEI_DEV_DISABLED)
- dev_err(&dev->pdev->dev, "reset failed");
+ if (dev->dev_state == MEI_DEV_DISABLED) {
+ dev_err(&dev->pdev->dev, "device disabled = %d\n", ret);
+ return;
+ }
+
+ /* retry reset in case of failure */
+ if (ret)
+ schedule_work(&dev->reset_work);
}
void mei_stop(struct mei_device *dev)
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index f0fbb51..75ff409 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -161,6 +161,41 @@
}
/**
+ * mei_cl_irq_disconnect_rsp - send disconnection response message
+ *
+ * @cl: client
+ * @cb: callback block.
+ * @slots: free slots.
+ * @cmpl_list: complete list.
+ *
+ * returns 0, OK; otherwise, error.
+ */
+static int mei_cl_irq_disconnect_rsp(struct mei_cl *cl, struct mei_cl_cb *cb,
+ s32 *slots, struct mei_cl_cb *cmpl_list)
+{
+ struct mei_device *dev = cl->dev;
+ int ret;
+
+ u32 msg_slots =
+ mei_data2slots(sizeof(struct hbm_client_connect_response));
+
+ if (*slots < msg_slots)
+ return -EMSGSIZE;
+
+ *slots -= msg_slots;
+
+ ret = mei_hbm_cl_disconnect_rsp(dev, cl);
+
+ cl->state = MEI_FILE_DISCONNECTED;
+ cl->status = 0;
+ mei_io_cb_free(cb);
+
+ return ret;
+}
+
+
+
+/**
* mei_cl_irq_close - processes close related operation from
* interrupt thread context - send disconnect request
*
@@ -244,8 +279,7 @@
/**
- * mei_cl_irq_ioctl - processes client ioctl related operation from the
- * interrupt thread context - send connection request
+ * mei_cl_irq_connect - send connect request in irq_thread context
*
* @cl: client
* @cb: callback block.
@@ -254,7 +288,7 @@
*
* returns 0, OK; otherwise, error.
*/
-static int mei_cl_irq_ioctl(struct mei_cl *cl, struct mei_cl_cb *cb,
+static int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
s32 *slots, struct mei_cl_cb *cmpl_list)
{
struct mei_device *dev = cl->dev;
@@ -263,6 +297,9 @@
u32 msg_slots =
mei_data2slots(sizeof(struct hbm_client_connect_request));
+ if (mei_cl_is_other_connecting(cl))
+ return 0;
+
if (*slots < msg_slots) {
/* return the cancel routine */
list_del(&cb->list);
@@ -450,12 +487,6 @@
wake_up_interruptible(&dev->wait_stop_wd);
}
- if (dev->wr_ext_msg.hdr.length) {
- mei_write_message(dev, &dev->wr_ext_msg.hdr,
- dev->wr_ext_msg.data);
- slots -= mei_data2slots(dev->wr_ext_msg.hdr.length);
- dev->wr_ext_msg.hdr.length = 0;
- }
if (dev->dev_state == MEI_DEV_ENABLED) {
if (dev->wd_pending &&
mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) {
@@ -496,16 +527,18 @@
return ret;
break;
- case MEI_FOP_IOCTL:
+ case MEI_FOP_CONNECT:
/* connect message */
- if (mei_cl_is_other_connecting(cl))
- continue;
- ret = mei_cl_irq_ioctl(cl, cb, &slots, cmpl_list);
+ ret = mei_cl_irq_connect(cl, cb, &slots, cmpl_list);
if (ret)
return ret;
break;
-
+ case MEI_FOP_DISCONNECT_RSP:
+ /* send disconnect resp */
+ ret = mei_cl_irq_disconnect_rsp(cl, cb, &slots, cmpl_list);
+ if (ret)
+ return ret;
default:
BUG();
}
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index f7de95b..21e5249 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -130,16 +130,18 @@
/**
* enum mei_cb_file_ops - file operation associated with the callback
- * @MEI_FOP_READ - read
- * @MEI_FOP_WRITE - write
- * @MEI_FOP_IOCTL - ioctl
- * @MEI_FOP_OPEN - open
- * @MEI_FOP_CLOSE - close
+ * @MEI_FOP_READ - read
+ * @MEI_FOP_WRITE - write
+ * @MEI_FOP_CONNECT - connect
+ * @MEI_FOP_DISCONNECT_RSP - disconnect response
+ * @MEI_FOP_OPEN - open
+ * @MEI_FOP_CLOSE - close
*/
enum mei_cb_file_ops {
MEI_FOP_READ = 0,
MEI_FOP_WRITE,
- MEI_FOP_IOCTL,
+ MEI_FOP_CONNECT,
+ MEI_FOP_DISCONNECT_RSP,
MEI_FOP_OPEN,
MEI_FOP_CLOSE
};
@@ -339,7 +341,6 @@
* @hbuf_depth - depth of hardware host/write buffer is slots
* @hbuf_is_ready - query if the host host/write buffer is ready
* @wr_msg - the buffer for hbm control messages
- * @wr_ext_msg - the buffer for hbm control responses (set in read cycle)
*/
struct mei_device {
struct pci_dev *pdev; /* pointer to pci device struct */
@@ -394,11 +395,6 @@
unsigned char data[128];
} wr_msg;
- struct {
- struct mei_msg_hdr hdr;
- unsigned char data[4]; /* All HBM messages are 4 bytes */
- } wr_ext_msg; /* for control responses */
-
struct hbm_version version;
struct mei_me_client *me_clients; /* Note: memory has to be allocated */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index ddadd08..5434354 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -27,7 +27,6 @@
#include <linux/aio.h>
#include <linux/pci.h>
#include <linux/poll.h>
-#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/sched.h>
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
new file mode 100644
index 0000000..af4412c
--- /dev/null
+++ b/drivers/misc/mei/pci-txe.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uuid.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+#include <linux/mei.h>
+
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+
+static DEFINE_PCI_DEVICE_TABLE(mei_txe_pci_tbl) = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F18)}, /* Baytrail */
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);
+
+
+static void mei_txe_pci_iounmap(struct pci_dev *pdev, struct mei_txe_hw *hw)
+{
+ int i;
+ for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
+ if (hw->mem_addr[i]) {
+ pci_iounmap(pdev, hw->mem_addr[i]);
+ hw->mem_addr[i] = NULL;
+ }
+ }
+}
+/**
+ * mei_probe - Device Initialization Routine
+ *
+ * @pdev: PCI device structure
+ * @ent: entry in mei_txe_pci_tbl
+ *
+ * returns 0 on success, <0 on failure.
+ */
+static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+ int err;
+ int i;
+
+ /* enable pci dev */
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to enable pci device.\n");
+ goto end;
+ }
+ /* set PCI host mastering */
+ pci_set_master(pdev);
+ /* pci request regions for mei driver */
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get pci regions.\n");
+ goto disable_device;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No suitable DMA available.\n");
+ goto release_regions;
+ }
+ }
+
+ /* allocates and initializes the mei dev structure */
+ dev = mei_txe_dev_init(pdev);
+ if (!dev) {
+ err = -ENOMEM;
+ goto release_regions;
+ }
+ hw = to_txe_hw(dev);
+
+ /* mapping IO device memory */
+ for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
+ hw->mem_addr[i] = pci_iomap(pdev, i, 0);
+ if (!hw->mem_addr[i]) {
+ dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
+ err = -ENOMEM;
+ goto free_device;
+ }
+ }
+
+
+ pci_enable_msi(pdev);
+
+ /* clear spurious interrupts */
+ mei_clear_interrupts(dev);
+
+ /* request and enable interrupt */
+ if (pci_dev_msi_enabled(pdev))
+ err = request_threaded_irq(pdev->irq,
+ NULL,
+ mei_txe_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, dev);
+ else
+ err = request_threaded_irq(pdev->irq,
+ mei_txe_irq_quick_handler,
+ mei_txe_irq_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
+ pdev->irq);
+ goto free_device;
+ }
+
+ if (mei_start(dev)) {
+ dev_err(&pdev->dev, "init hw failure.\n");
+ err = -ENODEV;
+ goto release_irq;
+ }
+
+ err = mei_register(dev);
+ if (err)
+ goto release_irq;
+
+ pci_set_drvdata(pdev, dev);
+
+ return 0;
+
+release_irq:
+
+ mei_cancel_work(dev);
+
+ /* disable interrupts */
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+free_device:
+ mei_txe_pci_iounmap(pdev, hw);
+
+ kfree(dev);
+release_regions:
+ pci_release_regions(pdev);
+disable_device:
+ pci_disable_device(pdev);
+end:
+ dev_err(&pdev->dev, "initialization failed.\n");
+ return err;
+}
+
+/**
+ * mei_remove - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * mei_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ */
+static void mei_txe_remove(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev) {
+ dev_err(&pdev->dev, "mei: dev =NULL\n");
+ return;
+ }
+
+ hw = to_txe_hw(dev);
+
+ mei_stop(dev);
+
+ /* disable interrupts */
+ mei_disable_interrupts(dev);
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ mei_txe_pci_iounmap(pdev, hw);
+
+ mei_deregister(dev);
+
+ kfree(dev);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+
+#ifdef CONFIG_PM
+static int mei_txe_pci_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev = pci_get_drvdata(pdev);
+
+ if (!dev)
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "suspend\n");
+
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
+
+ free_irq(pdev->irq, dev);
+ pci_disable_msi(pdev);
+
+ return 0;
+}
+
+static int mei_txe_pci_resume(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct mei_device *dev;
+ int err;
+
+ dev = pci_get_drvdata(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ pci_enable_msi(pdev);
+
+ mei_clear_interrupts(dev);
+
+ /* request and enable interrupt */
+ if (pci_dev_msi_enabled(pdev))
+ err = request_threaded_irq(pdev->irq,
+ NULL,
+ mei_txe_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, dev);
+ else
+ err = request_threaded_irq(pdev->irq,
+ mei_txe_irq_quick_handler,
+ mei_txe_irq_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+ pdev->irq);
+ return err;
+ }
+
+ err = mei_restart(dev);
+
+ return err;
+}
+
+static SIMPLE_DEV_PM_OPS(mei_txe_pm_ops,
+ mei_txe_pci_suspend,
+ mei_txe_pci_resume);
+
+#define MEI_TXE_PM_OPS (&mei_txe_pm_ops)
+#else
+#define MEI_TXE_PM_OPS NULL
+#endif /* CONFIG_PM */
+/*
+ * PCI driver structure
+ */
+static struct pci_driver mei_txe_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = mei_txe_pci_tbl,
+ .probe = mei_txe_probe,
+ .remove = mei_txe_remove,
+ .shutdown = mei_txe_remove,
+ .driver.pm = MEI_TXE_PM_OPS,
+};
+
+module_pci_driver(mei_txe_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index afe66571..e3e421d 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -87,8 +87,6 @@
if (gen_pool_avail(sram->pool) < gen_pool_size(sram->pool))
dev_dbg(&pdev->dev, "removed while SRAM allocated\n");
- gen_pool_destroy(sram->pool);
-
if (sram->clk)
clk_disable_unprepare(sram->clk);
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 3aed525..1972d57 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -22,7 +22,6 @@
#define pr_fmt(fmt) "(stc): " fmt
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/tty.h>
#include <linux/seq_file.h>
diff --git a/drivers/misc/ti_dac7512.c b/drivers/misc/ti_dac7512.c
index 83da711..cb0289b 100644
--- a/drivers/misc/ti_dac7512.c
+++ b/drivers/misc/ti_dac7512.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/spi/spi.h>
#include <linux/of.h>
diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c
index 5bc10fa1..b003356 100644
--- a/drivers/misc/tsl2550.c
+++ b/drivers/misc/tsl2550.c
@@ -20,7 +20,6 @@
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
new file mode 100644
index 0000000..075bd79
--- /dev/null
+++ b/drivers/spmi/Kconfig
@@ -0,0 +1,27 @@
+#
+# SPMI driver configuration
+#
+menuconfig SPMI
+ tristate "SPMI support"
+ help
+ SPMI (System Power Management Interface) is a two-wire
+ serial interface between baseband and application processors
+ and Power Management Integrated Circuits (PMIC).
+
+if SPMI
+
+config SPMI_MSM_PMIC_ARB
+ tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)"
+ depends on ARM
+ depends on IRQ_DOMAIN
+ depends on ARCH_MSM || COMPILE_TEST
+ default ARCH_MSM
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Qualcomm MSM family
+ processors.
+
+ This is required for communicating with Qualcomm PMICs and
+ other devices that have the SPMI interface.
+
+endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
new file mode 100644
index 0000000..fc75104
--- /dev/null
+++ b/drivers/spmi/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for kernel SPMI framework.
+#
+obj-$(CONFIG_SPMI) += spmi.o
+
+obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
new file mode 100644
index 0000000..246e03a
--- /dev/null
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -0,0 +1,778 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+/* PMIC Arbiter configuration registers */
+#define PMIC_ARB_VERSION 0x0000
+#define PMIC_ARB_INT_EN 0x0004
+
+/* PMIC Arbiter channel registers */
+#define PMIC_ARB_CMD(N) (0x0800 + (0x80 * (N)))
+#define PMIC_ARB_CONFIG(N) (0x0804 + (0x80 * (N)))
+#define PMIC_ARB_STATUS(N) (0x0808 + (0x80 * (N)))
+#define PMIC_ARB_WDATA0(N) (0x0810 + (0x80 * (N)))
+#define PMIC_ARB_WDATA1(N) (0x0814 + (0x80 * (N)))
+#define PMIC_ARB_RDATA0(N) (0x0818 + (0x80 * (N)))
+#define PMIC_ARB_RDATA1(N) (0x081C + (0x80 * (N)))
+
+/* Interrupt Controller */
+#define SPMI_PIC_OWNER_ACC_STATUS(M, N) (0x0000 + ((32 * (M)) + (4 * (N))))
+#define SPMI_PIC_ACC_ENABLE(N) (0x0200 + (4 * (N)))
+#define SPMI_PIC_IRQ_STATUS(N) (0x0600 + (4 * (N)))
+#define SPMI_PIC_IRQ_CLEAR(N) (0x0A00 + (4 * (N)))
+
+/* Mapping Table */
+#define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N)))
+#define SPMI_MAPPING_BIT_INDEX(X) (((X) >> 18) & 0xF)
+#define SPMI_MAPPING_BIT_IS_0_FLAG(X) (((X) >> 17) & 0x1)
+#define SPMI_MAPPING_BIT_IS_0_RESULT(X) (((X) >> 9) & 0xFF)
+#define SPMI_MAPPING_BIT_IS_1_FLAG(X) (((X) >> 8) & 0x1)
+#define SPMI_MAPPING_BIT_IS_1_RESULT(X) (((X) >> 0) & 0xFF)
+
+#define SPMI_MAPPING_TABLE_LEN 255
+#define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */
+
+/* Ownership Table */
+#define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N)))
+#define SPMI_OWNERSHIP_PERIPH2OWNER(X) ((X) & 0x7)
+
+/* Channel Status fields */
+enum pmic_arb_chnl_status {
+ PMIC_ARB_STATUS_DONE = (1 << 0),
+ PMIC_ARB_STATUS_FAILURE = (1 << 1),
+ PMIC_ARB_STATUS_DENIED = (1 << 2),
+ PMIC_ARB_STATUS_DROPPED = (1 << 3),
+};
+
+/* Command register fields */
+#define PMIC_ARB_CMD_MAX_BYTE_COUNT 8
+
+/* Command Opcodes */
+enum pmic_arb_cmd_op_code {
+ PMIC_ARB_OP_EXT_WRITEL = 0,
+ PMIC_ARB_OP_EXT_READL = 1,
+ PMIC_ARB_OP_EXT_WRITE = 2,
+ PMIC_ARB_OP_RESET = 3,
+ PMIC_ARB_OP_SLEEP = 4,
+ PMIC_ARB_OP_SHUTDOWN = 5,
+ PMIC_ARB_OP_WAKEUP = 6,
+ PMIC_ARB_OP_AUTHENTICATE = 7,
+ PMIC_ARB_OP_MSTR_READ = 8,
+ PMIC_ARB_OP_MSTR_WRITE = 9,
+ PMIC_ARB_OP_EXT_READ = 13,
+ PMIC_ARB_OP_WRITE = 14,
+ PMIC_ARB_OP_READ = 15,
+ PMIC_ARB_OP_ZERO_WRITE = 16,
+};
+
+/* Maximum number of support PMIC peripherals */
+#define PMIC_ARB_MAX_PERIPHS 256
+#define PMIC_ARB_PERIPH_ID_VALID (1 << 15)
+#define PMIC_ARB_TIMEOUT_US 100
+#define PMIC_ARB_MAX_TRANS_BYTES (8)
+
+#define PMIC_ARB_APID_MASK 0xFF
+#define PMIC_ARB_PPID_MASK 0xFFF
+
+/* interrupt enable bit */
+#define SPMI_PIC_ACC_ENABLE_BIT BIT(0)
+
+/**
+ * spmi_pmic_arb_dev - SPMI PMIC Arbiter object
+ *
+ * @base: address of the PMIC Arbiter core registers.
+ * @intr: address of the SPMI interrupt control registers.
+ * @cnfg: address of the PMIC Arbiter configuration registers.
+ * @lock: lock to synchronize accesses.
+ * @channel: which channel to use for accesses.
+ * @irq: PMIC ARB interrupt.
+ * @ee: the current Execution Environment
+ * @min_apid: minimum APID (used for bounding IRQ search)
+ * @max_apid: maximum APID
+ * @mapping_table: in-memory copy of PPID -> APID mapping table.
+ * @domain: irq domain object for PMIC IRQ domain
+ * @spmic: SPMI controller object
+ * @apid_to_ppid: cached mapping from APID to PPID
+ */
+struct spmi_pmic_arb_dev {
+ void __iomem *base;
+ void __iomem *intr;
+ void __iomem *cnfg;
+ raw_spinlock_t lock;
+ u8 channel;
+ int irq;
+ u8 ee;
+ u8 min_apid;
+ u8 max_apid;
+ u32 mapping_table[SPMI_MAPPING_TABLE_LEN];
+ struct irq_domain *domain;
+ struct spmi_controller *spmic;
+ u16 apid_to_ppid[256];
+};
+
+static inline u32 pmic_arb_base_read(struct spmi_pmic_arb_dev *dev, u32 offset)
+{
+ return readl_relaxed(dev->base + offset);
+}
+
+static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev,
+ u32 offset, u32 val)
+{
+ writel_relaxed(val, dev->base + offset);
+}
+
+/**
+ * pa_read_data: reads pmic-arb's register and copy 1..4 bytes to buf
+ * @bc: byte count -1. range: 0..3
+ * @reg: register's address
+ * @buf: output parameter, length must be bc + 1
+ */
+static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc)
+{
+ u32 data = pmic_arb_base_read(dev, reg);
+ memcpy(buf, &data, (bc & 3) + 1);
+}
+
+/**
+ * pa_write_data: write 1..4 bytes from buf to pmic-arb's register
+ * @bc: byte-count -1. range: 0..3.
+ * @reg: register's address.
+ * @buf: buffer to write. length must be bc + 1.
+ */
+static void
+pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg, u8 bc)
+{
+ u32 data = 0;
+ memcpy(&data, buf, (bc & 3) + 1);
+ pmic_arb_base_write(dev, reg, data);
+}
+
+static int pmic_arb_wait_for_done(struct spmi_controller *ctrl)
+{
+ struct spmi_pmic_arb_dev *dev = spmi_controller_get_drvdata(ctrl);
+ u32 status = 0;
+ u32 timeout = PMIC_ARB_TIMEOUT_US;
+ u32 offset = PMIC_ARB_STATUS(dev->channel);
+
+ while (timeout--) {
+ status = pmic_arb_base_read(dev, offset);
+
+ if (status & PMIC_ARB_STATUS_DONE) {
+ if (status & PMIC_ARB_STATUS_DENIED) {
+ dev_err(&ctrl->dev,
+ "%s: transaction denied (0x%x)\n",
+ __func__, status);
+ return -EPERM;
+ }
+
+ if (status & PMIC_ARB_STATUS_FAILURE) {
+ dev_err(&ctrl->dev,
+ "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+
+ if (status & PMIC_ARB_STATUS_DROPPED) {
+ dev_err(&ctrl->dev,
+ "%s: transaction dropped (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+
+ return 0;
+ }
+ udelay(1);
+ }
+
+ dev_err(&ctrl->dev,
+ "%s: timeout, status 0x%x\n",
+ __func__, status);
+ return -ETIMEDOUT;
+}
+
+/* Non-data command */
+static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+ unsigned long flags;
+ u32 cmd;
+ int rc;
+
+ /* Check for valid non-data command */
+ if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+ return -EINVAL;
+
+ cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20);
+
+ raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+ rc = pmic_arb_wait_for_done(ctrl);
+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+
+ return rc;
+}
+
+static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, u8 *buf, size_t len)
+{
+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+ unsigned long flags;
+ u8 bc = len - 1;
+ u32 cmd;
+ int rc;
+
+ if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "pmic-arb supports 1..%d bytes per trans, but %d requested",
+ PMIC_ARB_MAX_TRANS_BYTES, len);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x60 && opc <= 0x7F)
+ opc = PMIC_ARB_OP_READ;
+ else if (opc >= 0x20 && opc <= 0x2F)
+ opc = PMIC_ARB_OP_EXT_READ;
+ else if (opc >= 0x38 && opc <= 0x3F)
+ opc = PMIC_ARB_OP_EXT_READL;
+ else
+ return -EINVAL;
+
+ cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
+
+ raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+ rc = pmic_arb_wait_for_done(ctrl);
+ if (rc)
+ goto done;
+
+ pa_read_data(pmic_arb, buf, PMIC_ARB_RDATA0(pmic_arb->channel),
+ min_t(u8, bc, 3));
+
+ if (bc > 3)
+ pa_read_data(pmic_arb, buf + 4,
+ PMIC_ARB_RDATA1(pmic_arb->channel), bc - 4);
+
+done:
+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+ return rc;
+}
+
+static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, const u8 *buf, size_t len)
+{
+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
+ unsigned long flags;
+ u8 bc = len - 1;
+ u32 cmd;
+ int rc;
+
+ if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
+ dev_err(&ctrl->dev,
+ "pmic-arb supports 1..%d bytes per trans, but:%d requested",
+ PMIC_ARB_MAX_TRANS_BYTES, len);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x40 && opc <= 0x5F)
+ opc = PMIC_ARB_OP_WRITE;
+ else if (opc >= 0x00 && opc <= 0x0F)
+ opc = PMIC_ARB_OP_EXT_WRITE;
+ else if (opc >= 0x30 && opc <= 0x37)
+ opc = PMIC_ARB_OP_EXT_WRITEL;
+ else if (opc >= 0x80 && opc <= 0xFF)
+ opc = PMIC_ARB_OP_ZERO_WRITE;
+ else
+ return -EINVAL;
+
+ cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
+
+ /* Write data to FIFOs */
+ raw_spin_lock_irqsave(&pmic_arb->lock, flags);
+ pa_write_data(pmic_arb, buf, PMIC_ARB_WDATA0(pmic_arb->channel)
+ , min_t(u8, bc, 3));
+ if (bc > 3)
+ pa_write_data(pmic_arb, buf + 4,
+ PMIC_ARB_WDATA1(pmic_arb->channel), bc - 4);
+
+ /* Start the transaction */
+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd);
+ rc = pmic_arb_wait_for_done(ctrl);
+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
+
+ return rc;
+}
+
+enum qpnpint_regs {
+ QPNPINT_REG_RT_STS = 0x10,
+ QPNPINT_REG_SET_TYPE = 0x11,
+ QPNPINT_REG_POLARITY_HIGH = 0x12,
+ QPNPINT_REG_POLARITY_LOW = 0x13,
+ QPNPINT_REG_LATCHED_CLR = 0x14,
+ QPNPINT_REG_EN_SET = 0x15,
+ QPNPINT_REG_EN_CLR = 0x16,
+ QPNPINT_REG_LATCHED_STS = 0x18,
+};
+
+struct spmi_pmic_arb_qpnpint_type {
+ u8 type; /* 1 -> edge */
+ u8 polarity_high;
+ u8 polarity_low;
+} __packed;
+
+/* Simplified accessor functions for irqchip callbacks */
+static void qpnpint_spmi_write(struct irq_data *d, u8 reg, void *buf,
+ size_t len)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 sid = d->hwirq >> 24;
+ u8 per = d->hwirq >> 16;
+
+ if (pmic_arb_write_cmd(pa->spmic, SPMI_CMD_EXT_WRITEL, sid,
+ (per << 8) + reg, buf, len))
+ dev_err_ratelimited(&pa->spmic->dev,
+ "failed irqchip transaction on %x\n",
+ d->irq);
+}
+
+static void qpnpint_spmi_read(struct irq_data *d, u8 reg, void *buf, size_t len)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 sid = d->hwirq >> 24;
+ u8 per = d->hwirq >> 16;
+
+ if (pmic_arb_read_cmd(pa->spmic, SPMI_CMD_EXT_READL, sid,
+ (per << 8) + reg, buf, len))
+ dev_err_ratelimited(&pa->spmic->dev,
+ "failed irqchip transaction on %x\n",
+ d->irq);
+}
+
+static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
+{
+ unsigned int irq;
+ u32 status;
+ int id;
+
+ status = readl_relaxed(pa->intr + SPMI_PIC_IRQ_STATUS(apid));
+ while (status) {
+ id = ffs(status) - 1;
+ status &= ~(1 << id);
+ irq = irq_find_mapping(pa->domain,
+ pa->apid_to_ppid[apid] << 16
+ | id << 8
+ | apid);
+ generic_handle_irq(irq);
+ }
+}
+
+static void pmic_arb_chained_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct spmi_pmic_arb_dev *pa = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ void __iomem *intr = pa->intr;
+ int first = pa->min_apid >> 5;
+ int last = pa->max_apid >> 5;
+ u32 status;
+ int i, id;
+
+ chained_irq_enter(chip, desc);
+
+ for (i = first; i <= last; ++i) {
+ status = readl_relaxed(intr +
+ SPMI_PIC_OWNER_ACC_STATUS(pa->ee, i));
+ while (status) {
+ id = ffs(status) - 1;
+ status &= ~(1 << id);
+ periph_interrupt(pa, id + i * 32);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void qpnpint_irq_ack(struct irq_data *d)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 irq = d->hwirq >> 8;
+ u8 apid = d->hwirq;
+ unsigned long flags;
+ u8 data;
+
+ raw_spin_lock_irqsave(&pa->lock, flags);
+ writel_relaxed(1 << irq, pa->intr + SPMI_PIC_IRQ_CLEAR(apid));
+ raw_spin_unlock_irqrestore(&pa->lock, flags);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
+}
+
+static void qpnpint_irq_mask(struct irq_data *d)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 irq = d->hwirq >> 8;
+ u8 apid = d->hwirq;
+ unsigned long flags;
+ u32 status;
+ u8 data;
+
+ raw_spin_lock_irqsave(&pa->lock, flags);
+ status = readl_relaxed(pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ if (status & SPMI_PIC_ACC_ENABLE_BIT) {
+ status = status & ~SPMI_PIC_ACC_ENABLE_BIT;
+ writel_relaxed(status, pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ }
+ raw_spin_unlock_irqrestore(&pa->lock, flags);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &data, 1);
+}
+
+static void qpnpint_irq_unmask(struct irq_data *d)
+{
+ struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
+ u8 irq = d->hwirq >> 8;
+ u8 apid = d->hwirq;
+ unsigned long flags;
+ u32 status;
+ u8 data;
+
+ raw_spin_lock_irqsave(&pa->lock, flags);
+ status = readl_relaxed(pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ if (!(status & SPMI_PIC_ACC_ENABLE_BIT)) {
+ writel_relaxed(status | SPMI_PIC_ACC_ENABLE_BIT,
+ pa->intr + SPMI_PIC_ACC_ENABLE(apid));
+ }
+ raw_spin_unlock_irqrestore(&pa->lock, flags);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_EN_SET, &data, 1);
+}
+
+static void qpnpint_irq_enable(struct irq_data *d)
+{
+ u8 irq = d->hwirq >> 8;
+ u8 data;
+
+ qpnpint_irq_unmask(d);
+
+ data = 1 << irq;
+ qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
+}
+
+static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+ struct spmi_pmic_arb_qpnpint_type type;
+ u8 irq = d->hwirq >> 8;
+
+ qpnpint_spmi_read(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
+
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ type.type |= 1 << irq;
+ if (flow_type & IRQF_TRIGGER_RISING)
+ type.polarity_high |= 1 << irq;
+ if (flow_type & IRQF_TRIGGER_FALLING)
+ type.polarity_low |= 1 << irq;
+ } else {
+ if ((flow_type & (IRQF_TRIGGER_HIGH)) &&
+ (flow_type & (IRQF_TRIGGER_LOW)))
+ return -EINVAL;
+
+ type.type &= ~(1 << irq); /* level trig */
+ if (flow_type & IRQF_TRIGGER_HIGH)
+ type.polarity_high |= 1 << irq;
+ else
+ type.polarity_low |= 1 << irq;
+ }
+
+ qpnpint_spmi_write(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
+ return 0;
+}
+
+static struct irq_chip pmic_arb_irqchip = {
+ .name = "pmic_arb",
+ .irq_enable = qpnpint_irq_enable,
+ .irq_ack = qpnpint_irq_ack,
+ .irq_mask = qpnpint_irq_mask,
+ .irq_unmask = qpnpint_irq_unmask,
+ .irq_set_type = qpnpint_irq_set_type,
+ .flags = IRQCHIP_MASK_ON_SUSPEND
+ | IRQCHIP_SKIP_SET_WAKE,
+};
+
+struct spmi_pmic_arb_irq_spec {
+ unsigned slave:4;
+ unsigned per:8;
+ unsigned irq:3;
+};
+
+static int search_mapping_table(struct spmi_pmic_arb_dev *pa,
+ struct spmi_pmic_arb_irq_spec *spec,
+ u8 *apid)
+{
+ u16 ppid = spec->slave << 8 | spec->per;
+ u32 *mapping_table = pa->mapping_table;
+ int index = 0, i;
+ u32 data;
+
+ for (i = 0; i < SPMI_MAPPING_TABLE_TREE_DEPTH; ++i) {
+ data = mapping_table[index];
+
+ if (ppid & (1 << SPMI_MAPPING_BIT_INDEX(data))) {
+ if (SPMI_MAPPING_BIT_IS_1_FLAG(data)) {
+ index = SPMI_MAPPING_BIT_IS_1_RESULT(data);
+ } else {
+ *apid = SPMI_MAPPING_BIT_IS_1_RESULT(data);
+ return 0;
+ }
+ } else {
+ if (SPMI_MAPPING_BIT_IS_0_FLAG(data)) {
+ index = SPMI_MAPPING_BIT_IS_0_RESULT(data);
+ } else {
+ *apid = SPMI_MAPPING_BIT_IS_0_RESULT(data);
+ return 0;
+ }
+ }
+ }
+
+ return -ENODEV;
+}
+
+static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ struct spmi_pmic_arb_dev *pa = d->host_data;
+ struct spmi_pmic_arb_irq_spec spec;
+ int err;
+ u8 apid;
+
+ dev_dbg(&pa->spmic->dev,
+ "intspec[0] 0x%1x intspec[1] 0x%02x intspec[2] 0x%02x\n",
+ intspec[0], intspec[1], intspec[2]);
+
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize != 4)
+ return -EINVAL;
+ if (intspec[0] > 0xF || intspec[1] > 0xFF || intspec[2] > 0x7)
+ return -EINVAL;
+
+ spec.slave = intspec[0];
+ spec.per = intspec[1];
+ spec.irq = intspec[2];
+
+ err = search_mapping_table(pa, &spec, &apid);
+ if (err)
+ return err;
+
+ pa->apid_to_ppid[apid] = spec.slave << 8 | spec.per;
+
+ /* Keep track of {max,min}_apid for bounding search during interrupt */
+ if (apid > pa->max_apid)
+ pa->max_apid = apid;
+ if (apid < pa->min_apid)
+ pa->min_apid = apid;
+
+ *out_hwirq = spec.slave << 24
+ | spec.per << 16
+ | spec.irq << 8
+ | apid;
+ *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
+
+ dev_dbg(&pa->spmic->dev, "out_hwirq = %lu\n", *out_hwirq);
+
+ return 0;
+}
+
+static int qpnpint_irq_domain_map(struct irq_domain *d,
+ unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct spmi_pmic_arb_dev *pa = d->host_data;
+
+ dev_dbg(&pa->spmic->dev, "virq = %u, hwirq = %lu\n", virq, hwirq);
+
+ irq_set_chip_and_handler(virq, &pmic_arb_irqchip, handle_level_irq);
+ irq_set_chip_data(virq, d->host_data);
+ irq_set_noprobe(virq);
+ return 0;
+}
+
+static const struct irq_domain_ops pmic_arb_irq_domain_ops = {
+ .map = qpnpint_irq_domain_map,
+ .xlate = qpnpint_irq_domain_dt_translate,
+};
+
+static int spmi_pmic_arb_probe(struct platform_device *pdev)
+{
+ struct spmi_pmic_arb_dev *pa;
+ struct spmi_controller *ctrl;
+ struct resource *res;
+ u32 channel, ee;
+ int err, i;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*pa));
+ if (!ctrl)
+ return -ENOMEM;
+
+ pa = spmi_controller_get_drvdata(ctrl);
+ pa->spmic = ctrl;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
+ pa->base = devm_ioremap_resource(&ctrl->dev, res);
+ if (IS_ERR(pa->base)) {
+ err = PTR_ERR(pa->base);
+ goto err_put_ctrl;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr");
+ pa->intr = devm_ioremap_resource(&ctrl->dev, res);
+ if (IS_ERR(pa->intr)) {
+ err = PTR_ERR(pa->intr);
+ goto err_put_ctrl;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cnfg");
+ pa->cnfg = devm_ioremap_resource(&ctrl->dev, res);
+ if (IS_ERR(pa->cnfg)) {
+ err = PTR_ERR(pa->cnfg);
+ goto err_put_ctrl;
+ }
+
+ pa->irq = platform_get_irq_byname(pdev, "periph_irq");
+ if (pa->irq < 0) {
+ err = pa->irq;
+ goto err_put_ctrl;
+ }
+
+ err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel);
+ if (err) {
+ dev_err(&pdev->dev, "channel unspecified.\n");
+ goto err_put_ctrl;
+ }
+
+ if (channel > 5) {
+ dev_err(&pdev->dev, "invalid channel (%u) specified.\n",
+ channel);
+ goto err_put_ctrl;
+ }
+
+ pa->channel = channel;
+
+ err = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &ee);
+ if (err) {
+ dev_err(&pdev->dev, "EE unspecified.\n");
+ goto err_put_ctrl;
+ }
+
+ if (ee > 5) {
+ dev_err(&pdev->dev, "invalid EE (%u) specified\n", ee);
+ err = -EINVAL;
+ goto err_put_ctrl;
+ }
+
+ pa->ee = ee;
+
+ for (i = 0; i < ARRAY_SIZE(pa->mapping_table); ++i)
+ pa->mapping_table[i] = readl_relaxed(
+ pa->cnfg + SPMI_MAPPING_TABLE_REG(i));
+
+ /* Initialize max_apid/min_apid to the opposite bounds, during
+ * the irq domain translation, we are sure to update these */
+ pa->max_apid = 0;
+ pa->min_apid = PMIC_ARB_MAX_PERIPHS - 1;
+
+ platform_set_drvdata(pdev, ctrl);
+ raw_spin_lock_init(&pa->lock);
+
+ ctrl->cmd = pmic_arb_cmd;
+ ctrl->read_cmd = pmic_arb_read_cmd;
+ ctrl->write_cmd = pmic_arb_write_cmd;
+
+ dev_dbg(&pdev->dev, "adding irq domain\n");
+ pa->domain = irq_domain_add_tree(pdev->dev.of_node,
+ &pmic_arb_irq_domain_ops, pa);
+ if (!pa->domain) {
+ dev_err(&pdev->dev, "unable to create irq_domain\n");
+ err = -ENOMEM;
+ goto err_put_ctrl;
+ }
+
+ irq_set_handler_data(pa->irq, pa);
+ irq_set_chained_handler(pa->irq, pmic_arb_chained_irq);
+
+ err = spmi_controller_add(ctrl);
+ if (err)
+ goto err_domain_remove;
+
+ dev_dbg(&ctrl->dev, "PMIC Arb Version 0x%x\n",
+ pmic_arb_base_read(pa, PMIC_ARB_VERSION));
+
+ return 0;
+
+err_domain_remove:
+ irq_set_chained_handler(pa->irq, NULL);
+ irq_set_handler_data(pa->irq, NULL);
+ irq_domain_remove(pa->domain);
+err_put_ctrl:
+ spmi_controller_put(ctrl);
+ return err;
+}
+
+static int spmi_pmic_arb_remove(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+ struct spmi_pmic_arb_dev *pa = spmi_controller_get_drvdata(ctrl);
+ spmi_controller_remove(ctrl);
+ irq_set_chained_handler(pa->irq, NULL);
+ irq_set_handler_data(pa->irq, NULL);
+ irq_domain_remove(pa->domain);
+ spmi_controller_put(ctrl);
+ return 0;
+}
+
+static const struct of_device_id spmi_pmic_arb_match_table[] = {
+ { .compatible = "qcom,spmi-pmic-arb", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
+
+static struct platform_driver spmi_pmic_arb_driver = {
+ .probe = spmi_pmic_arb_probe,
+ .remove = spmi_pmic_arb_remove,
+ .driver = {
+ .name = "spmi_pmic_arb",
+ .owner = THIS_MODULE,
+ .of_match_table = spmi_pmic_arb_match_table,
+ },
+};
+module_platform_driver(spmi_pmic_arb_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:spmi_pmic_arb");
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
new file mode 100644
index 0000000..6122c8f
--- /dev/null
+++ b/drivers/spmi/spmi.c
@@ -0,0 +1,609 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/idr.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spmi.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/spmi/spmi.h>
+
+static DEFINE_IDA(ctrl_ida);
+
+static void spmi_dev_release(struct device *dev)
+{
+ struct spmi_device *sdev = to_spmi_device(dev);
+ kfree(sdev);
+}
+
+static const struct device_type spmi_dev_type = {
+ .release = spmi_dev_release,
+};
+
+static void spmi_ctrl_release(struct device *dev)
+{
+ struct spmi_controller *ctrl = to_spmi_controller(dev);
+ ida_simple_remove(&ctrl_ida, ctrl->nr);
+ kfree(ctrl);
+}
+
+static const struct device_type spmi_ctrl_type = {
+ .release = spmi_ctrl_release,
+};
+
+#ifdef CONFIG_PM_RUNTIME
+static int spmi_runtime_suspend(struct device *dev)
+{
+ struct spmi_device *sdev = to_spmi_device(dev);
+ int err;
+
+ err = pm_generic_runtime_suspend(dev);
+ if (err)
+ return err;
+
+ return spmi_command_sleep(sdev);
+}
+
+static int spmi_runtime_resume(struct device *dev)
+{
+ struct spmi_device *sdev = to_spmi_device(dev);
+ int err;
+
+ err = spmi_command_wakeup(sdev);
+ if (err)
+ return err;
+
+ return pm_generic_runtime_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops spmi_pm_ops = {
+ SET_RUNTIME_PM_OPS(
+ spmi_runtime_suspend,
+ spmi_runtime_resume,
+ NULL
+ )
+};
+
+static int spmi_device_match(struct device *dev, struct device_driver *drv)
+{
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
+ if (drv->name)
+ return strncmp(dev_name(dev), drv->name,
+ SPMI_NAME_SIZE) == 0;
+
+ return 0;
+}
+
+/**
+ * spmi_device_add() - add a device previously constructed via spmi_device_alloc()
+ * @sdev: spmi_device to be added
+ */
+int spmi_device_add(struct spmi_device *sdev)
+{
+ struct spmi_controller *ctrl = sdev->ctrl;
+ int err;
+
+ dev_set_name(&sdev->dev, "%d-%02x", ctrl->nr, sdev->usid);
+
+ err = device_add(&sdev->dev);
+ if (err < 0) {
+ dev_err(&sdev->dev, "Can't add %s, status %d\n",
+ dev_name(&sdev->dev), err);
+ goto err_device_add;
+ }
+
+ dev_dbg(&sdev->dev, "device %s registered\n", dev_name(&sdev->dev));
+
+err_device_add:
+ return err;
+}
+EXPORT_SYMBOL_GPL(spmi_device_add);
+
+/**
+ * spmi_device_remove(): remove an SPMI device
+ * @sdev: spmi_device to be removed
+ */
+void spmi_device_remove(struct spmi_device *sdev)
+{
+ device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_device_remove);
+
+static inline int
+spmi_cmd(struct spmi_controller *ctrl, u8 opcode, u8 sid)
+{
+ if (!ctrl || !ctrl->cmd || ctrl->dev.type != &spmi_ctrl_type)
+ return -EINVAL;
+
+ return ctrl->cmd(ctrl, opcode, sid);
+}
+
+static inline int spmi_read_cmd(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, u8 *buf, size_t len)
+{
+ if (!ctrl || !ctrl->read_cmd || ctrl->dev.type != &spmi_ctrl_type)
+ return -EINVAL;
+
+ return ctrl->read_cmd(ctrl, opcode, sid, addr, buf, len);
+}
+
+static inline int spmi_write_cmd(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, const u8 *buf, size_t len)
+{
+ if (!ctrl || !ctrl->write_cmd || ctrl->dev.type != &spmi_ctrl_type)
+ return -EINVAL;
+
+ return ctrl->write_cmd(ctrl, opcode, sid, addr, buf, len);
+}
+
+/**
+ * spmi_register_read() - register read
+ * @sdev: SPMI device.
+ * @addr: slave register address (5-bit address).
+ * @buf: buffer to be populated with data from the Slave.
+ *
+ * Reads 1 byte of data from a Slave device register.
+ */
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf)
+{
+ /* 5-bit register address */
+ if (addr > 0x1F)
+ return -EINVAL;
+
+ return spmi_read_cmd(sdev->ctrl, SPMI_CMD_READ, sdev->usid, addr,
+ buf, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_read);
+
+/**
+ * spmi_ext_register_read() - extended register read
+ * @sdev: SPMI device.
+ * @addr: slave register address (8-bit address).
+ * @buf: buffer to be populated with data from the Slave.
+ * @len: the request number of bytes to read (up to 16 bytes).
+ *
+ * Reads up to 16 bytes of data from the extended register space on a
+ * Slave device.
+ */
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+ size_t len)
+{
+ /* 8-bit register address, up to 16 bytes */
+ if (len == 0 || len > 16)
+ return -EINVAL;
+
+ return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READ, sdev->usid, addr,
+ buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_read);
+
+/**
+ * spmi_ext_register_readl() - extended register read long
+ * @sdev: SPMI device.
+ * @addr: slave register address (16-bit address).
+ * @buf: buffer to be populated with data from the Slave.
+ * @len: the request number of bytes to read (up to 8 bytes).
+ *
+ * Reads up to 8 bytes of data from the extended register space on a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+ size_t len)
+{
+ /* 16-bit register address, up to 8 bytes */
+ if (len == 0 || len > 8)
+ return -EINVAL;
+
+ return spmi_read_cmd(sdev->ctrl, SPMI_CMD_EXT_READL, sdev->usid, addr,
+ buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_readl);
+
+/**
+ * spmi_register_write() - register write
+ * @sdev: SPMI device
+ * @addr: slave register address (5-bit address).
+ * @data: buffer containing the data to be transferred to the Slave.
+ *
+ * Writes 1 byte of data to a Slave device register.
+ */
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data)
+{
+ /* 5-bit register address */
+ if (addr > 0x1F)
+ return -EINVAL;
+
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_WRITE, sdev->usid, addr,
+ &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_write);
+
+/**
+ * spmi_register_zero_write() - register zero write
+ * @sdev: SPMI device.
+ * @data: the data to be written to register 0 (7-bits).
+ *
+ * Writes data to register 0 of the Slave device.
+ */
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data)
+{
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_ZERO_WRITE, sdev->usid, 0,
+ &data, 1);
+}
+EXPORT_SYMBOL_GPL(spmi_register_zero_write);
+
+/**
+ * spmi_ext_register_write() - extended register write
+ * @sdev: SPMI device.
+ * @addr: slave register address (8-bit address).
+ * @buf: buffer containing the data to be transferred to the Slave.
+ * @len: the request number of bytes to read (up to 16 bytes).
+ *
+ * Writes up to 16 bytes of data to the extended register space of a
+ * Slave device.
+ */
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr, const u8 *buf,
+ size_t len)
+{
+ /* 8-bit register address, up to 16 bytes */
+ if (len == 0 || len > 16)
+ return -EINVAL;
+
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITE, sdev->usid, addr,
+ buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_write);
+
+/**
+ * spmi_ext_register_writel() - extended register write long
+ * @sdev: SPMI device.
+ * @addr: slave register address (16-bit address).
+ * @buf: buffer containing the data to be transferred to the Slave.
+ * @len: the request number of bytes to read (up to 8 bytes).
+ *
+ * Writes up to 8 bytes of data to the extended register space of a
+ * Slave device using 16-bit address.
+ */
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr, const u8 *buf,
+ size_t len)
+{
+ /* 4-bit Slave Identifier, 16-bit register address, up to 8 bytes */
+ if (len == 0 || len > 8)
+ return -EINVAL;
+
+ return spmi_write_cmd(sdev->ctrl, SPMI_CMD_EXT_WRITEL, sdev->usid,
+ addr, buf, len);
+}
+EXPORT_SYMBOL_GPL(spmi_ext_register_writel);
+
+/**
+ * spmi_command_reset() - sends RESET command to the specified slave
+ * @sdev: SPMI device.
+ *
+ * The Reset command initializes the Slave and forces all registers to
+ * their reset values. The Slave shall enter the STARTUP state after
+ * receiving a Reset command.
+ */
+int spmi_command_reset(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_RESET, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_reset);
+
+/**
+ * spmi_command_sleep() - sends SLEEP command to the specified SPMI device
+ * @sdev: SPMI device.
+ *
+ * The Sleep command causes the Slave to enter the user defined SLEEP state.
+ */
+int spmi_command_sleep(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_SLEEP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_sleep);
+
+/**
+ * spmi_command_wakeup() - sends WAKEUP command to the specified SPMI device
+ * @sdev: SPMI device.
+ *
+ * The Wakeup command causes the Slave to move from the SLEEP state to
+ * the ACTIVE state.
+ */
+int spmi_command_wakeup(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_WAKEUP, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_wakeup);
+
+/**
+ * spmi_command_shutdown() - sends SHUTDOWN command to the specified SPMI device
+ * @sdev: SPMI device.
+ *
+ * The Shutdown command causes the Slave to enter the SHUTDOWN state.
+ */
+int spmi_command_shutdown(struct spmi_device *sdev)
+{
+ return spmi_cmd(sdev->ctrl, SPMI_CMD_SHUTDOWN, sdev->usid);
+}
+EXPORT_SYMBOL_GPL(spmi_command_shutdown);
+
+static int spmi_drv_probe(struct device *dev)
+{
+ const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+ struct spmi_device *sdev = to_spmi_device(dev);
+ int err;
+
+ /* Ensure the slave is in ACTIVE state */
+ err = spmi_command_wakeup(sdev);
+ if (err)
+ goto fail_wakeup;
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ err = sdrv->probe(sdev);
+ if (err)
+ goto fail_probe;
+
+ return 0;
+
+fail_probe:
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+fail_wakeup:
+ return err;
+}
+
+static int spmi_drv_remove(struct device *dev)
+{
+ const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
+
+ pm_runtime_get_sync(dev);
+ sdrv->remove(to_spmi_device(dev));
+ pm_runtime_put_noidle(dev);
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+ return 0;
+}
+
+static struct bus_type spmi_bus_type = {
+ .name = "spmi",
+ .match = spmi_device_match,
+ .pm = &spmi_pm_ops,
+ .probe = spmi_drv_probe,
+ .remove = spmi_drv_remove,
+};
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI device
+ * @ctrl: associated controller
+ *
+ * Caller is responsible for either calling spmi_device_add() to add the
+ * newly allocated controller, or calling spmi_device_put() to discard it.
+ */
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl)
+{
+ struct spmi_device *sdev;
+
+ sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!sdev)
+ return NULL;
+
+ sdev->ctrl = ctrl;
+ device_initialize(&sdev->dev);
+ sdev->dev.parent = &ctrl->dev;
+ sdev->dev.bus = &spmi_bus_type;
+ sdev->dev.type = &spmi_dev_type;
+ return sdev;
+}
+EXPORT_SYMBOL_GPL(spmi_device_alloc);
+
+/**
+ * spmi_controller_alloc() - Allocate a new SPMI controller
+ * @parent: parent device
+ * @size: size of private data
+ *
+ * Caller is responsible for either calling spmi_controller_add() to add the
+ * newly allocated controller, or calling spmi_controller_put() to discard it.
+ * The allocated private data region may be accessed via
+ * spmi_controller_get_drvdata()
+ */
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+ size_t size)
+{
+ struct spmi_controller *ctrl;
+ int id;
+
+ if (WARN_ON(!parent))
+ return NULL;
+
+ ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
+ if (!ctrl)
+ return NULL;
+
+ device_initialize(&ctrl->dev);
+ ctrl->dev.type = &spmi_ctrl_type;
+ ctrl->dev.bus = &spmi_bus_type;
+ ctrl->dev.parent = parent;
+ ctrl->dev.of_node = parent->of_node;
+ spmi_controller_set_drvdata(ctrl, &ctrl[1]);
+
+ id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ dev_err(parent,
+ "unable to allocate SPMI controller identifier.\n");
+ spmi_controller_put(ctrl);
+ return NULL;
+ }
+
+ ctrl->nr = id;
+ dev_set_name(&ctrl->dev, "spmi-%d", id);
+
+ dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
+ return ctrl;
+}
+EXPORT_SYMBOL_GPL(spmi_controller_alloc);
+
+static void of_spmi_register_devices(struct spmi_controller *ctrl)
+{
+ struct device_node *node;
+ int err;
+
+ if (!ctrl->dev.of_node)
+ return;
+
+ for_each_available_child_of_node(ctrl->dev.of_node, node) {
+ struct spmi_device *sdev;
+ u32 reg[2];
+
+ dev_dbg(&ctrl->dev, "adding child %s\n", node->full_name);
+
+ err = of_property_read_u32_array(node, "reg", reg, 2);
+ if (err) {
+ dev_err(&ctrl->dev,
+ "node %s err (%d) does not have 'reg' property\n",
+ node->full_name, err);
+ continue;
+ }
+
+ if (reg[1] != SPMI_USID) {
+ dev_err(&ctrl->dev,
+ "node %s contains unsupported 'reg' entry\n",
+ node->full_name);
+ continue;
+ }
+
+ if (reg[0] >= SPMI_MAX_SLAVE_ID) {
+ dev_err(&ctrl->dev,
+ "invalid usid on node %s\n",
+ node->full_name);
+ continue;
+ }
+
+ dev_dbg(&ctrl->dev, "read usid %02x\n", reg[0]);
+
+ sdev = spmi_device_alloc(ctrl);
+ if (!sdev)
+ continue;
+
+ sdev->dev.of_node = node;
+ sdev->usid = (u8) reg[0];
+
+ err = spmi_device_add(sdev);
+ if (err) {
+ dev_err(&sdev->dev,
+ "failure adding device. status %d\n", err);
+ spmi_device_put(sdev);
+ }
+ }
+}
+
+/**
+ * spmi_controller_add() - Add an SPMI controller
+ * @ctrl: controller to be registered.
+ *
+ * Register a controller previously allocated via spmi_controller_alloc() with
+ * the SPMI core.
+ */
+int spmi_controller_add(struct spmi_controller *ctrl)
+{
+ int ret;
+
+ /* Can't register until after driver model init */
+ if (WARN_ON(!spmi_bus_type.p))
+ return -EAGAIN;
+
+ ret = device_add(&ctrl->dev);
+ if (ret)
+ return ret;
+
+ if (IS_ENABLED(CONFIG_OF))
+ of_spmi_register_devices(ctrl);
+
+ dev_dbg(&ctrl->dev, "spmi-%d registered: dev:%p\n",
+ ctrl->nr, &ctrl->dev);
+
+ return 0;
+};
+EXPORT_SYMBOL_GPL(spmi_controller_add);
+
+/* Remove a device associated with a controller */
+static int spmi_ctrl_remove_device(struct device *dev, void *data)
+{
+ struct spmi_device *spmidev = to_spmi_device(dev);
+ if (dev->type == &spmi_dev_type)
+ spmi_device_remove(spmidev);
+ return 0;
+}
+
+/**
+ * spmi_controller_remove(): remove an SPMI controller
+ * @ctrl: controller to remove
+ *
+ * Remove a SPMI controller. Caller is responsible for calling
+ * spmi_controller_put() to discard the allocated controller.
+ */
+void spmi_controller_remove(struct spmi_controller *ctrl)
+{
+ int dummy;
+
+ if (!ctrl)
+ return;
+
+ dummy = device_for_each_child(&ctrl->dev, NULL,
+ spmi_ctrl_remove_device);
+ device_del(&ctrl->dev);
+}
+EXPORT_SYMBOL_GPL(spmi_controller_remove);
+
+/**
+ * spmi_driver_register() - Register client driver with SPMI core
+ * @sdrv: client driver to be associated with client-device.
+ *
+ * This API will register the client driver with the SPMI framework.
+ * It is typically called from the driver's module-init function.
+ */
+int spmi_driver_register(struct spmi_driver *sdrv)
+{
+ sdrv->driver.bus = &spmi_bus_type;
+ return driver_register(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(spmi_driver_register);
+
+static void __exit spmi_exit(void)
+{
+ bus_unregister(&spmi_bus_type);
+}
+module_exit(spmi_exit);
+
+static int __init spmi_init(void)
+{
+ return bus_register(&spmi_bus_type);
+}
+postcore_initcall(spmi_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SPMI module");
+MODULE_ALIAS("platform:spmi");
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 256fba7..1f38445 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -190,7 +190,7 @@
uvfb_tasks[seq] = task;
mutex_unlock(&uvfb_lock);
- err = cn_netlink_send(m, 0, GFP_KERNEL);
+ err = cn_netlink_send(m, 0, 0, GFP_KERNEL);
if (err == -ESRCH) {
/*
* Try to start the userspace helper if sending
@@ -204,7 +204,7 @@
"helper is installed and executable\n");
} else {
v86d_started = 1;
- err = cn_netlink_send(m, 0, gfp_any());
+ err = cn_netlink_send(m, 0, 0, gfp_any());
if (err == -ENOBUFS)
err = 0;
}
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index 1b5d48c..bfb2d3f 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -869,14 +869,13 @@
spin_lock(&image->lock);
- /* The following code handles VME address alignment problem
- * in order to assure the maximal data width cycle.
- * We cannot use memcpy_xxx directly here because it
- * may cut data transfer in 8-bits cycles, thus making
- * D16 cycle impossible.
- * From the other hand, the bridge itself assures that
- * maximal configured data cycle is used and splits it
- * automatically for non-aligned addresses.
+ /* The following code handles VME address alignment. We cannot use
+ * memcpy_xxx here because it may cut data transfers in to 8-bit
+ * cycles when D16 or D32 cycles are required on the VME bus.
+ * On the other hand, the bridge itself assures that the maximum data
+ * cycle configured for the transfer is used and splits it
+ * automatically for non-aligned addresses, so we don't want the
+ * overhead of needlessly forcing small transfers for the entire cycle.
*/
if ((uintptr_t)addr & 0x1) {
*(u8 *)buf = ioread8(addr);
@@ -896,9 +895,9 @@
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_fromio(buf + done, addr + done, (unsigned int)count);
- done += count32;
+ while (done < count32) {
+ *(u32 *)(buf + done) = ioread32(addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -930,7 +929,7 @@
spin_lock(&image->lock);
/* Here we apply for the same strategy we do in master_read
- * function in order to assure D16 cycle when required.
+ * function in order to assure the correct cycles.
*/
if ((uintptr_t)addr & 0x1) {
iowrite8(*(u8 *)buf, addr);
@@ -950,9 +949,9 @@
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_toio(addr + done, buf + done, count32);
- done += count32;
+ while (done < count32) {
+ iowrite32(*(u32 *)(buf + done), addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index 9911cd5..06990c6 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -1276,8 +1276,8 @@
spin_lock(&image->lock);
/* The following code handles VME address alignment. We cannot use
- * memcpy_xxx directly here because it may cut small data transfers in
- * to 8-bit cycles, thus making D16 cycle impossible.
+ * memcpy_xxx here because it may cut data transfers in to 8-bit
+ * cycles when D16 or D32 cycles are required on the VME bus.
* On the other hand, the bridge itself assures that the maximum data
* cycle configured for the transfer is used and splits it
* automatically for non-aligned addresses, so we don't want the
@@ -1301,9 +1301,9 @@
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_fromio(buf + done, addr + done, count32);
- done += count32;
+ while (done < count32) {
+ *(u32 *)(buf + done) = ioread32(addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
@@ -1363,7 +1363,7 @@
spin_lock(&image->lock);
/* Here we apply for the same strategy we do in master_read
- * function in order to assure D16 cycle when required.
+ * function in order to assure the correct cycles.
*/
if ((uintptr_t)addr & 0x1) {
iowrite8(*(u8 *)buf, addr);
@@ -1383,9 +1383,9 @@
}
count32 = (count - done) & ~0x3;
- if (count32 > 0) {
- memcpy_toio(addr + done, buf + done, count32);
- done += count32;
+ while (done < count32) {
+ iowrite32(*(u32 *)(buf + done), addr + done);
+ done += 4;
}
if ((count - done) & 0x2) {
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 4f7e1d7..7404ad30 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -1,5 +1,5 @@
/*
- * dscore.c
+ * ds2490.c USB to one wire bridge
*
* Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
@@ -28,6 +28,10 @@
#include "../w1_int.h"
#include "../w1.h"
+/* USB Standard */
+/* USB Control request vendor type */
+#define VENDOR 0x40
+
/* COMMAND TYPE CODES */
#define CONTROL_CMD 0x00
#define COMM_CMD 0x01
@@ -107,6 +111,8 @@
#define ST_HALT 0x10 /* DS2490 is currently halted */
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
+/* Status transfer size, 16 bytes status, 16 byte result flags */
+#define ST_SIZE 0x20
/* Result Register flags */
#define RR_DETECT 0xA5 /* New device detected */
@@ -198,7 +204,7 @@
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
+ CONTROL_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
value, index, err);
@@ -213,7 +219,7 @@
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- MODE_CMD, 0x40, value, index, NULL, 0, 1000);
+ MODE_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
value, index, err);
@@ -228,7 +234,7 @@
int err;
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
- COMM_CMD, 0x40, value, index, NULL, 0, 1000);
+ COMM_CMD, VENDOR, value, index, NULL, 0, 1000);
if (err < 0) {
printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
value, index, err);
@@ -246,7 +252,8 @@
memset(st, 0, sizeof(*st));
count = 0;
- err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
+ err = usb_interrupt_msg(dev->udev, usb_rcvintpipe(dev->udev,
+ dev->ep[EP_STATUS]), buf, size, &count, 100);
if (err < 0) {
printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
return err;
@@ -353,7 +360,7 @@
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
buf, size, &count, 1000);
if (err < 0) {
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int count;
printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
@@ -398,7 +405,7 @@
{
struct ds_status st;
int count = 0, err = 0;
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
do {
err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
@@ -450,10 +457,11 @@
static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
{
- u8 buf[0x20];
+ u8 buf[ST_SIZE];
int err, count = 0;
do {
+ st->status = 0;
err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
#if 0
if (err >= 0) {
@@ -464,7 +472,7 @@
printk("\n");
}
#endif
- } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);
+ } while (!(st->status & ST_IDLE) && !(err < 0) && ++count < 100);
if (err >= 16 && st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
@@ -690,37 +698,106 @@
return !(err == len);
}
-#if 0
-
-static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
+static void ds9490r_search(void *data, struct w1_master *master,
+ u8 search_type, w1_slave_found_callback callback)
{
+ /* When starting with an existing id, the first id returned will
+ * be that device (if it is still on the bus most likely).
+ *
+ * If the number of devices found is less than or equal to the
+ * search_limit, that number of IDs will be returned. If there are
+ * more, search_limit IDs will be returned followed by a non-zero
+ * discrepency value.
+ */
+ struct ds_device *dev = data;
int err;
u16 value, index;
struct ds_status st;
+ u8 st_buf[ST_SIZE];
+ int search_limit;
+ int found = 0;
+ int i;
- memset(buf, 0, sizeof(buf));
+ /* DS18b20 spec, 13.16 ms per device, 75 per second, sleep for
+ * discovering 8 devices (1 bulk transfer and 1/2 FIFO size) at a time.
+ */
+ const unsigned long jtime = msecs_to_jiffies(1000*8/75);
+ /* FIFO 128 bytes, bulk packet size 64, read a multiple of the
+ * packet size.
+ */
+ u64 buf[2*64/8];
- err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
- if (err)
- return err;
+ mutex_lock(&master->bus_mutex);
- ds_wait_status(ds_dev, &st);
+ /* address to start searching at */
+ if (ds_send_data(dev, (u8 *)&master->search_id, 8) < 0)
+ goto search_out;
+ master->search_id = 0;
- value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
- index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
- err = ds_send_control(ds_dev, value, index);
- if (err)
- return err;
+ value = COMM_SEARCH_ACCESS | COMM_IM | COMM_RST | COMM_SM | COMM_F |
+ COMM_RTS;
+ search_limit = master->max_slave_count;
+ if (search_limit > 255)
+ search_limit = 0;
+ index = search_type | (search_limit << 8);
+ if (ds_send_control(dev, value, index) < 0)
+ goto search_out;
- ds_wait_status(ds_dev, &st);
+ do {
+ schedule_timeout(jtime);
- err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
- if (err < 0)
- return err;
+ if (ds_recv_status_nodump(dev, &st, st_buf, sizeof(st_buf)) <
+ sizeof(st)) {
+ break;
+ }
- return err/8;
+ if (st.data_in_buffer_status) {
+ /* Bulk in can receive partial ids, but when it does
+ * they fail crc and will be discarded anyway.
+ * That has only been seen when status in buffer
+ * is 0 and bulk is read anyway, so don't read
+ * bulk without first checking if status says there
+ * is data to read.
+ */
+ err = ds_recv_data(dev, (u8 *)buf, sizeof(buf));
+ if (err < 0)
+ break;
+ for (i = 0; i < err/8; ++i) {
+ ++found;
+ if (found <= search_limit)
+ callback(master, buf[i]);
+ /* can't know if there will be a discrepancy
+ * value after until the next id */
+ if (found == search_limit)
+ master->search_id = buf[i];
+ }
+ }
+
+ if (test_bit(W1_ABORT_SEARCH, &master->flags))
+ break;
+ } while (!(st.status & (ST_IDLE | ST_HALT)));
+
+ /* only continue the search if some weren't found */
+ if (found <= search_limit) {
+ master->search_id = 0;
+ } else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) {
+ /* Only max_slave_count will be scanned in a search,
+ * but it will start where it left off next search
+ * until all ids are identified and then it will start
+ * over. A continued search will report the previous
+ * last id as the first id (provided it is still on the
+ * bus).
+ */
+ dev_info(&dev->udev->dev, "%s: max_slave_count %d reached, "
+ "will continue next search.\n", __func__,
+ master->max_slave_count);
+ set_bit(W1_WARN_MAX_COUNT, &master->flags);
+ }
+search_out:
+ mutex_unlock(&master->bus_mutex);
}
+#if 0
static int ds_match_access(struct ds_device *dev, u64 init)
{
int err;
@@ -894,6 +971,7 @@
dev->master.write_block = &ds9490r_write_block;
dev->master.reset_bus = &ds9490r_reset;
dev->master.set_pullup = &ds9490r_set_pullup;
+ dev->master.search = &ds9490r_search;
return w1_add_master_device(&dev->master);
}
@@ -910,15 +988,13 @@
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *iface_desc;
struct ds_device *dev;
- int i, err;
+ int i, err, alt;
- dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct ds_device), GFP_KERNEL);
if (!dev) {
printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
return -ENOMEM;
}
- dev->spu_sleep = 0;
- dev->spu_bit = 0;
dev->udev = usb_get_dev(udev);
if (!dev->udev) {
err = -ENOMEM;
@@ -928,20 +1004,25 @@
usb_set_intfdata(intf, dev);
- err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
- if (err) {
- printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
- intf->altsetting[0].desc.bInterfaceNumber, err);
- goto err_out_clear;
- }
-
err = usb_reset_configuration(dev->udev);
if (err) {
- printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
+ dev_err(&dev->udev->dev,
+ "Failed to reset configuration: err=%d.\n", err);
goto err_out_clear;
}
- iface_desc = &intf->altsetting[0];
+ /* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */
+ alt = 3;
+ err = usb_set_interface(dev->udev,
+ intf->altsetting[alt].desc.bInterfaceNumber, alt);
+ if (err) {
+ dev_err(&dev->udev->dev, "Failed to set alternative setting %d "
+ "for %d interface: err=%d.\n", alt,
+ intf->altsetting[alt].desc.bInterfaceNumber, err);
+ goto err_out_clear;
+ }
+
+ iface_desc = &intf->altsetting[alt];
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
err = -EINVAL;
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9709b8b..1d111e5 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -89,11 +89,22 @@
pdata->is_open_drain = 1;
gpio = of_get_gpio(np, 0);
- if (gpio < 0)
+ if (gpio < 0) {
+ if (gpio != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to parse gpio property for data pin (%d)\n",
+ gpio);
+
return gpio;
+ }
pdata->pin = gpio;
- pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
+ gpio = of_get_gpio(np, 1);
+ if (gpio == -EPROBE_DEFER)
+ return gpio;
+ /* ignore other errors as the pullup gpio is optional */
+ pdata->ext_pullup_enable_pin = gpio;
+
pdev->dev.platform_data = pdata;
return 0;
@@ -107,10 +118,8 @@
if (of_have_populated_dt()) {
err = w1_gpio_probe_dt(pdev);
- if (err < 0) {
- dev_err(&pdev->dev, "Failed to parse DT\n");
+ if (err < 0)
return err;
- }
}
pdata = dev_get_platdata(&pdev->dev);
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 8b5ff33..1f11a20 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -27,6 +27,7 @@
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "../w1.h"
@@ -58,6 +59,19 @@
static int w1_strong_pullup = 1;
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
+static int w1_therm_add_slave(struct w1_slave *sl)
+{
+ sl->family_data = kzalloc(9, GFP_KERNEL);
+ if (!sl->family_data)
+ return -ENOMEM;
+ return 0;
+}
+
+static void w1_therm_remove_slave(struct w1_slave *sl)
+{
+ kfree(sl->family_data);
+ sl->family_data = NULL;
+}
static ssize_t w1_slave_show(struct device *device,
struct device_attribute *attr, char *buf);
@@ -71,6 +85,8 @@
ATTRIBUTE_GROUPS(w1_therm);
static struct w1_family_ops w1_therm_fops = {
+ .add_slave = w1_therm_add_slave,
+ .remove_slave = w1_therm_remove_slave,
.groups = w1_therm_groups,
};
@@ -253,12 +269,13 @@
c -= snprintf(buf + PAGE_SIZE - c, c, ": crc=%02x %s\n",
crc, (verdict) ? "YES" : "NO");
if (verdict)
- memcpy(sl->rom, rom, sizeof(sl->rom));
+ memcpy(sl->family_data, rom, sizeof(rom));
else
dev_warn(device, "Read failed CRC check\n");
for (i = 0; i < 9; ++i)
- c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", sl->rom[i]);
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ",
+ ((u8 *)sl->family_data)[i]);
c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
w1_convert_temp(rom, sl->family->fid));
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 66efa96..b96f61b 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -46,18 +46,29 @@
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol.");
static int w1_timeout = 10;
-int w1_max_slave_count = 10;
+int w1_max_slave_count = 64;
int w1_max_slave_ttl = 10;
module_param_named(timeout, w1_timeout, int, 0);
+MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches");
+/* A search stops when w1_max_slave_count devices have been found in that
+ * search. The next search will start over and detect the same set of devices
+ * on a static 1-wire bus. Memory is not allocated based on this number, just
+ * on the number of devices known to the kernel. Having a high number does not
+ * consume additional resources. As a special case, if there is only one
+ * device on the network and w1_max_slave_count is set to 1, the device id can
+ * be read directly skipping the normal slower search process.
+ */
module_param_named(max_slave_count, w1_max_slave_count, int, 0);
+MODULE_PARM_DESC(max_slave_count,
+ "maximum number of slaves detected in a search");
module_param_named(slave_ttl, w1_max_slave_ttl, int, 0);
+MODULE_PARM_DESC(slave_ttl,
+ "Number of searches not seeing a slave before it will be removed");
DEFINE_MUTEX(w1_mlock);
LIST_HEAD(w1_masters);
-static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
-
static int w1_master_match(struct device *dev, struct device_driver *drv)
{
return 1;
@@ -81,19 +92,10 @@
{
struct w1_slave *sl = dev_to_w1_slave(dev);
- dev_dbg(dev, "%s: Releasing %s.\n", __func__, sl->name);
-
- while (atomic_read(&sl->refcnt)) {
- dev_dbg(dev, "Waiting for %s to become free: refcnt=%d.\n",
- sl->name, atomic_read(&sl->refcnt));
- if (msleep_interruptible(1000))
- flush_signals(current);
- }
+ dev_dbg(dev, "%s: Releasing %s [%p]\n", __func__, sl->name, sl);
w1_family_put(sl->family);
sl->master->slave_count--;
-
- complete(&sl->released);
}
static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -243,7 +245,9 @@
mutex_lock(&md->mutex);
md->search_count = tmp;
mutex_unlock(&md->mutex);
- wake_up_process(md->thread);
+ /* Only wake if it is going to be searching. */
+ if (tmp)
+ wake_up_process(md->thread);
return count;
}
@@ -277,7 +281,6 @@
mutex_lock(&md->mutex);
md->enable_pullup = tmp;
mutex_unlock(&md->mutex);
- wake_up_process(md->thread);
return count;
}
@@ -314,6 +317,24 @@
return count;
}
+static ssize_t w1_master_attribute_store_max_slave_count(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int tmp;
+ struct w1_master *md = dev_to_w1_master(dev);
+
+ if (kstrtoint(buf, 0, &tmp) == -EINVAL || tmp < 1)
+ return -EINVAL;
+
+ mutex_lock(&md->mutex);
+ md->max_slave_count = tmp;
+ /* allow each time the max_slave_count is updated */
+ clear_bit(W1_WARN_MAX_COUNT, &md->flags);
+ mutex_unlock(&md->mutex);
+
+ return count;
+}
+
static ssize_t w1_master_attribute_show_max_slave_count(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w1_master *md = dev_to_w1_master(dev);
@@ -352,23 +373,20 @@
{
struct w1_master *md = dev_to_w1_master(dev);
int c = PAGE_SIZE;
+ struct list_head *ent, *n;
+ struct w1_slave *sl = NULL;
- mutex_lock(&md->mutex);
+ mutex_lock(&md->list_mutex);
- if (md->slave_count == 0)
- c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
- else {
- struct list_head *ent, *n;
- struct w1_slave *sl;
+ list_for_each_safe(ent, n, &md->slist) {
+ sl = list_entry(ent, struct w1_slave, w1_slave_entry);
- list_for_each_safe(ent, n, &md->slist) {
- sl = list_entry(ent, struct w1_slave, w1_slave_entry);
-
- c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name);
- }
+ c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name);
}
+ if (!sl)
+ c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n");
- mutex_unlock(&md->mutex);
+ mutex_unlock(&md->list_mutex);
return PAGE_SIZE - c;
}
@@ -422,19 +440,22 @@
}
/* Searches the slaves in the w1_master and returns a pointer or NULL.
- * Note: must hold the mutex
+ * Note: must not hold list_mutex
*/
-static struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
struct w1_reg_num *rn)
{
struct w1_slave *sl;
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
if (sl->reg_num.family == rn->family &&
sl->reg_num.id == rn->id &&
sl->reg_num.crc == rn->crc) {
+ mutex_unlock(&dev->list_mutex);
return sl;
}
}
+ mutex_unlock(&dev->list_mutex);
return NULL;
}
@@ -491,7 +512,10 @@
mutex_lock(&md->mutex);
sl = w1_slave_search_device(md, &rn);
if (sl) {
- w1_slave_detach(sl);
+ result = w1_slave_detach(sl);
+ /* refcnt 0 means it was detached in the call */
+ if (result == 0)
+ result = count;
} else {
dev_info(dev, "Device %02x-%012llx doesn't exists\n", rn.family,
(unsigned long long)rn.id);
@@ -516,7 +540,7 @@
static W1_MASTER_ATTR_RO(name, S_IRUGO);
static W1_MASTER_ATTR_RO(slaves, S_IRUGO);
static W1_MASTER_ATTR_RO(slave_count, S_IRUGO);
-static W1_MASTER_ATTR_RO(max_slave_count, S_IRUGO);
+static W1_MASTER_ATTR_RW(max_slave_count, S_IRUGO | S_IWUSR | S_IWGRP);
static W1_MASTER_ATTR_RO(attempts, S_IRUGO);
static W1_MASTER_ATTR_RO(timeout, S_IRUGO);
static W1_MASTER_ATTR_RO(pointer, S_IRUGO);
@@ -686,12 +710,14 @@
dev_set_uevent_suppress(&sl->dev, false);
kobject_uevent(&sl->dev.kobj, KOBJ_ADD);
+ mutex_lock(&sl->master->list_mutex);
list_add_tail(&sl->w1_slave_entry, &sl->master->slist);
+ mutex_unlock(&sl->master->list_mutex);
return 0;
}
-static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
{
struct w1_slave *sl;
struct w1_family *f;
@@ -713,8 +739,8 @@
memset(&msg, 0, sizeof(msg));
memcpy(&sl->reg_num, rn, sizeof(sl->reg_num));
- atomic_set(&sl->refcnt, 0);
- init_completion(&sl->released);
+ atomic_set(&sl->refcnt, 1);
+ atomic_inc(&sl->master->refcnt);
/* slave modules need to be loaded in a context with unlocked mutex */
mutex_unlock(&dev->mutex);
@@ -754,23 +780,48 @@
return 0;
}
-void w1_slave_detach(struct w1_slave *sl)
+int w1_unref_slave(struct w1_slave *sl)
{
- struct w1_netlink_msg msg;
+ struct w1_master *dev = sl->master;
+ int refcnt;
+ mutex_lock(&dev->list_mutex);
+ refcnt = atomic_sub_return(1, &sl->refcnt);
+ if (refcnt == 0) {
+ struct w1_netlink_msg msg;
- dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__, sl->name, sl);
+ dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__,
+ sl->name, sl);
- list_del(&sl->w1_slave_entry);
+ list_del(&sl->w1_slave_entry);
- memset(&msg, 0, sizeof(msg));
- memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
- msg.type = W1_SLAVE_REMOVE;
- w1_netlink_send(sl->master, &msg);
+ memset(&msg, 0, sizeof(msg));
+ memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id));
+ msg.type = W1_SLAVE_REMOVE;
+ w1_netlink_send(sl->master, &msg);
- device_unregister(&sl->dev);
+ device_unregister(&sl->dev);
+ #ifdef DEBUG
+ memset(sl, 0, sizeof(*sl));
+ #endif
+ kfree(sl);
+ }
+ atomic_dec(&dev->refcnt);
+ mutex_unlock(&dev->list_mutex);
+ return refcnt;
+}
- wait_for_completion(&sl->released);
- kfree(sl);
+int w1_slave_detach(struct w1_slave *sl)
+{
+ /* Only detach a slave once as it decreases the refcnt each time. */
+ int destroy_now;
+ mutex_lock(&sl->master->list_mutex);
+ destroy_now = !test_bit(W1_SLAVE_DETACH, &sl->flags);
+ set_bit(W1_SLAVE_DETACH, &sl->flags);
+ mutex_unlock(&sl->master->list_mutex);
+
+ if (destroy_now)
+ destroy_now = !w1_unref_slave(sl);
+ return destroy_now ? 0 : -EBUSY;
}
struct w1_master *w1_search_master_id(u32 id)
@@ -799,7 +850,7 @@
mutex_lock(&w1_mlock);
list_for_each_entry(dev, &w1_masters, w1_master_entry) {
- mutex_lock(&dev->mutex);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
if (sl->reg_num.family == id->family &&
sl->reg_num.id == id->id &&
@@ -810,7 +861,7 @@
break;
}
}
- mutex_unlock(&dev->mutex);
+ mutex_unlock(&dev->list_mutex);
if (found)
break;
@@ -830,6 +881,7 @@
dev_dbg(&dev->dev, "Reconnecting slaves in device %s "
"for family %02x.\n", dev->name, f->fid);
mutex_lock(&dev->mutex);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
/* If it is a new family, slaves with the default
* family driver and are that family will be
@@ -841,14 +893,19 @@
(!attach && sl->family->fid == f->fid)) {
struct w1_reg_num rn;
+ mutex_unlock(&dev->list_mutex);
memcpy(&rn, &sl->reg_num, sizeof(rn));
- w1_slave_detach(sl);
-
- w1_attach_slave_device(dev, &rn);
+ /* If it was already in use let the automatic
+ * scan pick it up again later.
+ */
+ if (!w1_slave_detach(sl))
+ w1_attach_slave_device(dev, &rn);
+ mutex_lock(&dev->list_mutex);
}
}
dev_dbg(&dev->dev, "Reconnecting slaves in device %s "
"has been finished.\n", dev->name);
+ mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
}
mutex_unlock(&w1_mlock);
@@ -876,7 +933,12 @@
}
/**
- * Performs a ROM Search & registers any devices found.
+ * w1_search() - Performs a ROM Search & registers any devices found.
+ * @dev: The master device to search
+ * @search_type: W1_SEARCH to search all devices, or W1_ALARM_SEARCH
+ * to return only devices in the alarmed state
+ * @cb: Function to call when a device is found
+ *
* The 1-wire search is a simple binary tree search.
* For each bit of the address, we read two bits and write one bit.
* The bit written will put to sleep all devies that don't match that bit.
@@ -886,8 +948,6 @@
*
* See "Application note 187 1-wire search algorithm" at www.maxim-ic.com
*
- * @dev The master device to search
- * @cb Function to call when a device is found
*/
void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb)
{
@@ -898,7 +958,8 @@
u8 triplet_ret = 0;
search_bit = 0;
- rn = last_rn = 0;
+ rn = dev->search_id;
+ last_rn = 0;
last_device = 0;
last_zero = -1;
@@ -945,7 +1006,7 @@
else
search_bit = ((last_rn >> i) & 0x1);
- /** Read two bits and write one bit */
+ /* Read two bits and write one bit */
triplet_ret = w1_triplet(dev, search_bit);
/* quit if no device responded */
@@ -960,8 +1021,7 @@
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- /* ensure we're called from kthread and not by netlink callback */
- if (!dev->priv && kthread_should_stop()) {
+ if (test_bit(W1_ABORT_SEARCH, &dev->flags)) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
@@ -970,11 +1030,30 @@
mutex_unlock(&dev->bus_mutex);
if ( (triplet_ret & 0x03) != 0x03 ) {
- if ( (desc_bit == last_zero) || (last_zero < 0))
+ if ((desc_bit == last_zero) || (last_zero < 0)) {
last_device = 1;
+ dev->search_id = 0;
+ } else {
+ dev->search_id = rn;
+ }
desc_bit = last_zero;
cb(dev, rn);
}
+
+ if (!last_device && slave_count == dev->max_slave_count &&
+ !test_bit(W1_WARN_MAX_COUNT, &dev->flags)) {
+ /* Only max_slave_count will be scanned in a search,
+ * but it will start where it left off next search
+ * until all ids are identified and then it will start
+ * over. A continued search will report the previous
+ * last id as the first id (provided it is still on the
+ * bus).
+ */
+ dev_info(&dev->dev, "%s: max_slave_count %d reached, "
+ "will continue next search.\n", __func__,
+ dev->max_slave_count);
+ set_bit(W1_WARN_MAX_COUNT, &dev->flags);
+ }
}
}
@@ -983,17 +1062,24 @@
{
struct w1_slave *sl, *sln;
+ mutex_lock(&dev->list_mutex);
list_for_each_entry(sl, &dev->slist, w1_slave_entry)
clear_bit(W1_SLAVE_ACTIVE, &sl->flags);
+ mutex_unlock(&dev->list_mutex);
w1_search_devices(dev, search_type, cb);
+ mutex_lock(&dev->list_mutex);
list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
- if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl)
+ if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl) {
+ mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
+ mutex_lock(&dev->list_mutex);
+ }
else if (test_bit(W1_SLAVE_ACTIVE, &sl->flags))
sl->ttl = dev->slave_ttl;
}
+ mutex_unlock(&dev->list_mutex);
if (dev->search_count > 0)
dev->search_count--;
@@ -1004,6 +1090,32 @@
w1_search_process_cb(dev, search_type, w1_slave_found);
}
+/**
+ * w1_process_callbacks() - execute each dev->async_list callback entry
+ * @dev: w1_master device
+ *
+ * Return: 1 if there were commands to executed 0 otherwise
+ */
+int w1_process_callbacks(struct w1_master *dev)
+{
+ int ret = 0;
+ struct w1_async_cmd *async_cmd, *async_n;
+
+ /* The list can be added to in another thread, loop until it is empty */
+ while (!list_empty(&dev->async_list)) {
+ list_for_each_entry_safe(async_cmd, async_n, &dev->async_list,
+ async_entry) {
+ /* drop the lock, if it is a search it can take a long
+ * time */
+ mutex_unlock(&dev->list_mutex);
+ async_cmd->cb(dev, async_cmd);
+ ret = 1;
+ mutex_lock(&dev->list_mutex);
+ }
+ }
+ return ret;
+}
+
int w1_process(void *data)
{
struct w1_master *dev = (struct w1_master *) data;
@@ -1011,23 +1123,46 @@
* time can be calculated in jiffies once.
*/
const unsigned long jtime = msecs_to_jiffies(w1_timeout * 1000);
+ /* remainder if it woke up early */
+ unsigned long jremain = 0;
- while (!kthread_should_stop()) {
- if (dev->search_count) {
+ for (;;) {
+
+ if (!jremain && dev->search_count) {
mutex_lock(&dev->mutex);
w1_search_process(dev, W1_SEARCH);
mutex_unlock(&dev->mutex);
}
+ mutex_lock(&dev->list_mutex);
+ /* Note, w1_process_callback drops the lock while processing,
+ * but locks it again before returning.
+ */
+ if (!w1_process_callbacks(dev) && jremain) {
+ /* a wake up is either to stop the thread, process
+ * callbacks, or search, it isn't process callbacks, so
+ * schedule a search.
+ */
+ jremain = 1;
+ }
+
try_to_freeze();
__set_current_state(TASK_INTERRUPTIBLE);
+ /* hold list_mutex until after interruptible to prevent loosing
+ * the wakeup signal when async_cmd is added.
+ */
+ mutex_unlock(&dev->list_mutex);
+
if (kthread_should_stop())
break;
/* Only sleep when the search is active. */
- if (dev->search_count)
- schedule_timeout(jtime);
+ if (dev->search_count) {
+ if (!jremain)
+ jremain = jtime;
+ jremain = schedule_timeout(jremain);
+ }
else
schedule();
}
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index ca8081a..734dab7 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -22,6 +22,13 @@
#ifndef __W1_H
#define __W1_H
+/**
+ * struct w1_reg_num - broken out slave device id
+ *
+ * @family: identifies the type of device
+ * @id: along with family is the unique device id
+ * @crc: checksum of the other bytes
+ */
struct w1_reg_num
{
#if defined(__LITTLE_ENDIAN_BITFIELD)
@@ -58,7 +65,24 @@
#define W1_RESUME_CMD 0xA5
#define W1_SLAVE_ACTIVE 0
+#define W1_SLAVE_DETACH 1
+/**
+ * struct w1_slave - holds a single slave device on the bus
+ *
+ * @owner: Points to the one wire "wire" kernel module.
+ * @name: Device id is ascii.
+ * @w1_slave_entry: data for the linked list
+ * @reg_num: the slave id in binary
+ * @refcnt: reference count, delete when 0
+ * @flags: bit flags for W1_SLAVE_ACTIVE W1_SLAVE_DETACH
+ * @ttl: decrement per search this slave isn't found, deatch at 0
+ * @master: bus which this slave is on
+ * @family: module for device family type
+ * @family_data: pointer for use by the family module
+ * @dev: kernel device identifier
+ *
+ */
struct w1_slave
{
struct module *owner;
@@ -66,7 +90,6 @@
struct list_head w1_slave_entry;
struct w1_reg_num reg_num;
atomic_t refcnt;
- u8 rom[9];
int ttl;
unsigned long flags;
@@ -74,99 +97,146 @@
struct w1_family *family;
void *family_data;
struct device dev;
- struct completion released;
};
typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
/**
+ * struct w1_bus_master - operations available on a bus master
+ *
+ * @data: the first parameter in all the functions below
+ *
+ * @read_bit: Sample the line level @return the level read (0 or 1)
+ *
+ * @write_bit: Sets the line level
+ *
+ * @touch_bit: the lowest-level function for devices that really support the
+ * 1-wire protocol.
+ * touch_bit(0) = write-0 cycle
+ * touch_bit(1) = write-1 / read cycle
+ * @return the bit read (0 or 1)
+ *
+ * @read_byte: Reads a bytes. Same as 8 touch_bit(1) calls.
+ * @return the byte read
+ *
+ * @write_byte: Writes a byte. Same as 8 touch_bit(x) calls.
+ *
+ * @read_block: Same as a series of read_byte() calls
+ * @return the number of bytes read
+ *
+ * @write_block: Same as a series of write_byte() calls
+ *
+ * @triplet: Combines two reads and a smart write for ROM searches
+ * @return bit0=Id bit1=comp_id bit2=dir_taken
+ *
+ * @reset_bus: long write-0 with a read for the presence pulse detection
+ * @return -1=Error, 0=Device present, 1=No device present
+ *
+ * @set_pullup: Put out a strong pull-up pulse of the specified duration.
+ * @return -1=Error, 0=completed
+ *
+ * @search: Really nice hardware can handles the different types of ROM search
+ * w1_master* is passed to the slave found callback.
+ * u8 is search_type, W1_SEARCH or W1_ALARM_SEARCH
+ *
* Note: read_bit and write_bit are very low level functions and should only
* be used with hardware that doesn't really support 1-wire operations,
* like a parallel/serial port.
* Either define read_bit and write_bit OR define, at minimum, touch_bit and
* reset_bus.
+ *
*/
struct w1_bus_master
{
- /** the first parameter in all the functions below */
void *data;
- /**
- * Sample the line level
- * @return the level read (0 or 1)
- */
u8 (*read_bit)(void *);
- /** Sets the line level */
void (*write_bit)(void *, u8);
- /**
- * touch_bit is the lowest-level function for devices that really
- * support the 1-wire protocol.
- * touch_bit(0) = write-0 cycle
- * touch_bit(1) = write-1 / read cycle
- * @return the bit read (0 or 1)
- */
u8 (*touch_bit)(void *, u8);
- /**
- * Reads a bytes. Same as 8 touch_bit(1) calls.
- * @return the byte read
- */
u8 (*read_byte)(void *);
- /**
- * Writes a byte. Same as 8 touch_bit(x) calls.
- */
void (*write_byte)(void *, u8);
- /**
- * Same as a series of read_byte() calls
- * @return the number of bytes read
- */
u8 (*read_block)(void *, u8 *, int);
- /** Same as a series of write_byte() calls */
void (*write_block)(void *, const u8 *, int);
- /**
- * Combines two reads and a smart write for ROM searches
- * @return bit0=Id bit1=comp_id bit2=dir_taken
- */
u8 (*triplet)(void *, u8);
- /**
- * long write-0 with a read for the presence pulse detection
- * @return -1=Error, 0=Device present, 1=No device present
- */
u8 (*reset_bus)(void *);
- /**
- * Put out a strong pull-up pulse of the specified duration.
- * @return -1=Error, 0=completed
- */
u8 (*set_pullup)(void *, int);
- /** Really nice hardware can handles the different types of ROM search
- * w1_master* is passed to the slave found callback.
- */
void (*search)(void *, struct w1_master *,
u8, w1_slave_found_callback);
};
+/**
+ * enum w1_master_flags - bitfields used in w1_master.flags
+ * @W1_ABORT_SEARCH: abort searching early on shutdown
+ * @W1_WARN_MAX_COUNT: limit warning when the maximum count is reached
+ */
+enum w1_master_flags {
+ W1_ABORT_SEARCH = 0,
+ W1_WARN_MAX_COUNT = 1,
+};
+
+/**
+ * struct w1_master - one per bus master
+ * @w1_master_entry: master linked list
+ * @owner: module owner
+ * @name: dynamically allocate bus name
+ * @list_mutex: protect slist and async_list
+ * @slist: linked list of slaves
+ * @async_list: linked list of netlink commands to execute
+ * @max_slave_count: maximum number of slaves to search for at a time
+ * @slave_count: current number of slaves known
+ * @attempts: number of searches ran
+ * @slave_ttl: number of searches before a slave is timed out
+ * @initialized: prevent init/removal race conditions
+ * @id: w1 bus number
+ * @search_count: number of automatic searches to run, -1 unlimited
+ * @search_id: allows continuing a search
+ * @refcnt: reference count
+ * @priv: private data storage
+ * @priv_size: size allocated
+ * @enable_pullup: allows a strong pullup
+ * @pullup_duration: time for the next strong pullup
+ * @flags: one of w1_master_flags
+ * @thread: thread for bus search and netlink commands
+ * @mutex: protect most of w1_master
+ * @bus_mutex: pretect concurrent bus access
+ * @driver: sysfs driver
+ * @dev: sysfs device
+ * @bus_master: io operations available
+ * @seq: sequence number used for netlink broadcasts
+ * @portid: destination for the current netlink command
+ */
struct w1_master
{
struct list_head w1_master_entry;
struct module *owner;
unsigned char name[W1_MAXNAMELEN];
+ /* list_mutex protects just slist and async_list so slaves can be
+ * searched for and async commands added while the master has
+ * w1_master.mutex locked and is operating on the bus.
+ * lock order w1_mlock, w1_master.mutex, w1_master.list_mutex
+ */
+ struct mutex list_mutex;
struct list_head slist;
+ struct list_head async_list;
int max_slave_count, slave_count;
unsigned long attempts;
int slave_ttl;
int initialized;
u32 id;
int search_count;
+ /* id to start searching on, to continue a search or 0 to restart */
+ u64 search_id;
atomic_t refcnt;
@@ -178,6 +248,8 @@
/** 5V strong pullup duration in milliseconds, zero disabled. */
int pullup_duration;
+ long flags;
+
struct task_struct *thread;
struct mutex mutex;
struct mutex bus_mutex;
@@ -188,16 +260,41 @@
struct w1_bus_master *bus_master;
u32 seq;
+ /* port id to send netlink responses to. The value is temporarily
+ * stored here while processing a message, set after locking the
+ * mutex, zero before unlocking the mutex.
+ */
+ u32 portid;
+};
+
+/**
+ * struct w1_async_cmd - execute callback from the w1_process kthread
+ * @async_entry: link entry
+ * @cb: callback function, must list_del and destroy this list before
+ * returning
+ *
+ * When inserted into the w1_master async_list, w1_process will execute
+ * the callback. Embed this into the structure with the command details.
+ */
+struct w1_async_cmd {
+ struct list_head async_entry;
+ void (*cb)(struct w1_master *dev, struct w1_async_cmd *async_cmd);
};
int w1_create_master_attributes(struct w1_master *);
void w1_destroy_master_attributes(struct w1_master *master);
void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb);
+/* call w1_unref_slave to release the reference counts w1_search_slave added */
struct w1_slave *w1_search_slave(struct w1_reg_num *id);
+/* decrements the reference on sl->master and sl, and cleans up if zero
+ * returns the reference count after it has been decremented */
+int w1_unref_slave(struct w1_slave *sl);
void w1_slave_found(struct w1_master *dev, u64 rn);
void w1_search_process_cb(struct w1_master *dev, u8 search_type,
w1_slave_found_callback cb);
+struct w1_slave *w1_slave_search_device(struct w1_master *dev,
+ struct w1_reg_num *rn);
struct w1_master *w1_search_master_id(u32 id);
/* Disconnect and reconnect devices in the given family. Used for finding
@@ -206,7 +303,9 @@
* has just been registered, to 0 when it has been unregistered.
*/
void w1_reconnect_slaves(struct w1_family *f, int attach);
-void w1_slave_detach(struct w1_slave *sl);
+int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn);
+/* 0 success, otherwise EBUSY */
+int w1_slave_detach(struct w1_slave *sl);
u8 w1_triplet(struct w1_master *dev, int bdir);
void w1_write_8(struct w1_master *, u8);
@@ -242,6 +341,7 @@
extern struct list_head w1_masters;
extern struct mutex w1_mlock;
+extern int w1_process_callbacks(struct w1_master *dev);
extern int w1_process(void *);
#endif /* __KERNEL__ */
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index e9309778..3bff6b3 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -31,6 +31,10 @@
DEFINE_SPINLOCK(w1_flock);
static LIST_HEAD(w1_families);
+/**
+ * w1_register_family() - register a device family driver
+ * @newf: family to register
+ */
int w1_register_family(struct w1_family *newf)
{
struct list_head *ent, *n;
@@ -59,6 +63,10 @@
return ret;
}
+/**
+ * w1_unregister_family() - unregister a device family driver
+ * @fent: family to unregister
+ */
void w1_unregister_family(struct w1_family *fent)
{
struct list_head *ent, *n;
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 4ad0e81..26ca134 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -48,6 +48,12 @@
struct w1_slave;
+/**
+ * struct w1_family_ops - operations for a family type
+ * @add_slave: add_slave
+ * @remove_slave: remove_slave
+ * @groups: sysfs group
+ */
struct w1_family_ops
{
int (* add_slave)(struct w1_slave *);
@@ -55,6 +61,13 @@
const struct attribute_group **groups;
};
+/**
+ * struct w1_family - reference counted family structure.
+ * @family_entry: family linked list
+ * @fid: 8 bit family identifier
+ * @fops: operations for this family
+ * @refcnt: reference counter
+ */
struct w1_family
{
struct list_head family_entry;
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 590bd8a..9b084db 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -75,8 +75,10 @@
atomic_set(&dev->refcnt, 2);
INIT_LIST_HEAD(&dev->slist);
+ INIT_LIST_HEAD(&dev->async_list);
mutex_init(&dev->mutex);
mutex_init(&dev->bus_mutex);
+ mutex_init(&dev->list_mutex);
memcpy(&dev->dev, device, sizeof(struct device));
dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
@@ -103,6 +105,10 @@
device_unregister(&dev->dev);
}
+/**
+ * w1_add_master_device() - registers a new master device
+ * @master: master bus device to register
+ */
int w1_add_master_device(struct w1_bus_master *master)
{
struct w1_master *dev, *entry;
@@ -172,6 +178,7 @@
#if 0 /* Thread cleanup code, not required currently. */
err_out_kill_thread:
+ set_bit(W1_ABORT_SEARCH, &dev->flags);
kthread_stop(dev->thread);
#endif
err_out_rm_attr:
@@ -187,16 +194,22 @@
struct w1_netlink_msg msg;
struct w1_slave *sl, *sln;
- kthread_stop(dev->thread);
-
mutex_lock(&w1_mlock);
list_del(&dev->w1_master_entry);
mutex_unlock(&w1_mlock);
+ set_bit(W1_ABORT_SEARCH, &dev->flags);
+ kthread_stop(dev->thread);
+
mutex_lock(&dev->mutex);
- list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry)
+ mutex_lock(&dev->list_mutex);
+ list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) {
+ mutex_unlock(&dev->list_mutex);
w1_slave_detach(sl);
+ mutex_lock(&dev->list_mutex);
+ }
w1_destroy_master_attributes(dev);
+ mutex_unlock(&dev->list_mutex);
mutex_unlock(&dev->mutex);
atomic_dec(&dev->refcnt);
@@ -206,7 +219,9 @@
if (msleep_interruptible(1000))
flush_signals(current);
+ w1_process_callbacks(dev);
}
+ w1_process_callbacks(dev);
memset(&msg, 0, sizeof(msg));
msg.id.mst.id = dev->id;
@@ -216,6 +231,10 @@
w1_free_dev(dev);
}
+/**
+ * w1_remove_master_device() - unregister a master device
+ * @bm: master bus device to remove
+ */
void w1_remove_master_device(struct w1_bus_master *bm)
{
struct w1_master *dev, *found = NULL;
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index e10acc2..2820924 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -62,7 +62,9 @@
static u8 w1_read_bit(struct w1_master *dev);
/**
- * Generates a write-0 or write-1 cycle and samples the level.
+ * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level.
+ * @dev: the master device
+ * @bit: 0 - write a 0, 1 - write a 0 read the level
*/
static u8 w1_touch_bit(struct w1_master *dev, int bit)
{
@@ -77,7 +79,10 @@
}
/**
- * Generates a write-0 or write-1 cycle.
+ * w1_write_bit() - Generates a write-0 or write-1 cycle.
+ * @dev: the master device
+ * @bit: bit to write
+ *
* Only call if dev->bus_master->touch_bit is NULL
*/
static void w1_write_bit(struct w1_master *dev, int bit)
@@ -102,11 +107,12 @@
}
/**
+ * w1_pre_write() - pre-write operations
+ * @dev: the master device
+ *
* Pre-write operation, currently only supporting strong pullups.
* Program the hardware for a strong pullup, if one has been requested and
* the hardware supports it.
- *
- * @param dev the master device
*/
static void w1_pre_write(struct w1_master *dev)
{
@@ -118,11 +124,12 @@
}
/**
+ * w1_post_write() - post-write options
+ * @dev: the master device
+ *
* Post-write operation, currently only supporting strong pullups.
* If a strong pullup was requested, clear it if the hardware supports
* them, or execute the delay otherwise, in either case clear the request.
- *
- * @param dev the master device
*/
static void w1_post_write(struct w1_master *dev)
{
@@ -136,10 +143,9 @@
}
/**
- * Writes 8 bits.
- *
- * @param dev the master device
- * @param byte the byte to write
+ * w1_write_8() - Writes 8 bits.
+ * @dev: the master device
+ * @byte: the byte to write
*/
void w1_write_8(struct w1_master *dev, u8 byte)
{
@@ -161,7 +167,9 @@
/**
- * Generates a write-1 cycle and samples the level.
+ * w1_read_bit() - Generates a write-1 cycle and samples the level.
+ * @dev: the master device
+ *
* Only call if dev->bus_master->touch_bit is NULL
*/
static u8 w1_read_bit(struct w1_master *dev)
@@ -185,16 +193,17 @@
}
/**
- * Does a triplet - used for searching ROM addresses.
+ * w1_triplet() - * Does a triplet - used for searching ROM addresses.
+ * @dev: the master device
+ * @bdir: the bit to write if both id_bit and comp_bit are 0
+ *
* Return bits:
* bit 0 = id_bit
* bit 1 = comp_bit
* bit 2 = dir_taken
* If both bits 0 & 1 are set, the search should be restarted.
*
- * @param dev the master device
- * @param bdir the bit to write if both id_bit and comp_bit are 0
- * @return bit fields - see above
+ * Return: bit fields - see above
*/
u8 w1_triplet(struct w1_master *dev, int bdir)
{
@@ -226,10 +235,10 @@
}
/**
- * Reads 8 bits.
+ * w1_read_8() - Reads 8 bits.
+ * @dev: the master device
*
- * @param dev the master device
- * @return the byte read
+ * Return: the byte read
*/
u8 w1_read_8(struct w1_master *dev)
{
@@ -247,11 +256,10 @@
EXPORT_SYMBOL_GPL(w1_read_8);
/**
- * Writes a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the data to write
- * @param len the number of bytes to write
+ * w1_write_block() - Writes a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the data to write
+ * @len: the number of bytes to write
*/
void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
{
@@ -269,11 +277,10 @@
EXPORT_SYMBOL_GPL(w1_write_block);
/**
- * Touches a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the data to write
- * @param len the number of bytes to write
+ * w1_touch_block() - Touches a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the data to write
+ * @len: the number of bytes to write
*/
void w1_touch_block(struct w1_master *dev, u8 *buf, int len)
{
@@ -294,12 +301,11 @@
EXPORT_SYMBOL_GPL(w1_touch_block);
/**
- * Reads a series of bytes.
- *
- * @param dev the master device
- * @param buf pointer to the buffer to fill
- * @param len the number of bytes to read
- * @return the number of bytes read
+ * w1_read_block() - Reads a series of bytes.
+ * @dev: the master device
+ * @buf: pointer to the buffer to fill
+ * @len: the number of bytes to read
+ * Return: the number of bytes read
*/
u8 w1_read_block(struct w1_master *dev, u8 *buf, int len)
{
@@ -319,10 +325,9 @@
EXPORT_SYMBOL_GPL(w1_read_block);
/**
- * Issues a reset bus sequence.
- *
- * @param dev The bus master pointer
- * @return 0=Device present, 1=No device present or error
+ * w1_reset_bus() - Issues a reset bus sequence.
+ * @dev: the master device
+ * Return: 0=Device present, 1=No device present or error
*/
int w1_reset_bus(struct w1_master *dev)
{
@@ -383,12 +388,15 @@
}
/**
+ * w1_reset_select_slave() - reset and select a slave
+ * @sl: the slave to select
+ *
* Resets the bus and then selects the slave by sending either a skip rom
- * or a rom match.
+ * or a rom match. A skip rom is issued if there is only one device
+ * registered on the bus.
* The w1 master lock must be held.
*
- * @param sl the slave to select
- * @return 0=success, anything else=error
+ * Return: 0=success, anything else=error
*/
int w1_reset_select_slave(struct w1_slave *sl)
{
@@ -409,6 +417,9 @@
EXPORT_SYMBOL_GPL(w1_reset_select_slave);
/**
+ * w1_reset_resume_command() - resume instead of another match ROM
+ * @dev: the master device
+ *
* When the workflow with a slave amongst many requires several
* successive commands a reset between each, this function is similar
* to doing a reset then a match ROM for the last matched ROM. The
@@ -420,8 +431,6 @@
* doesn't work of course, but the resume command is the next best thing.
*
* The w1 master lock must be held.
- *
- * @param dev the master device
*/
int w1_reset_resume_command(struct w1_master *dev)
{
@@ -435,6 +444,10 @@
EXPORT_SYMBOL_GPL(w1_reset_resume_command);
/**
+ * w1_next_pullup() - register for a strong pullup
+ * @dev: the master device
+ * @delay: time in milliseconds
+ *
* Put out a strong pull-up of the specified duration after the next write
* operation. Not all hardware supports strong pullups. Hardware that
* doesn't support strong pullups will sleep for the given time after the
@@ -442,8 +455,7 @@
* the next write, specifying zero will clear a previous request.
* The w1 master lock must be held.
*
- * @param delay time in milliseconds
- * @return 0=success, anything else=error
+ * Return: 0=success, anything else=error
*/
void w1_next_pullup(struct w1_master *dev, int delay)
{
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 40788c9..5234964 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -45,7 +45,7 @@
memcpy(w, msg, sizeof(struct w1_netlink_msg));
- cn_netlink_send(m, 0, GFP_KERNEL);
+ cn_netlink_send(m, dev->portid, 0, GFP_KERNEL);
}
static void w1_send_slave(struct w1_master *dev, u64 rn)
@@ -54,53 +54,95 @@
struct w1_netlink_msg *hdr = (struct w1_netlink_msg *)(msg + 1);
struct w1_netlink_cmd *cmd = (struct w1_netlink_cmd *)(hdr + 1);
int avail;
-
- /* update kernel slave list */
- w1_slave_found(dev, rn);
+ u64 *data;
avail = dev->priv_size - cmd->len;
- if (avail > 8) {
- u64 *data = (void *)(cmd + 1) + cmd->len;
+ if (avail < 8) {
+ msg->ack++;
+ cn_netlink_send(msg, dev->portid, 0, GFP_KERNEL);
- *data = rn;
- cmd->len += 8;
- hdr->len += 8;
- msg->len += 8;
- return;
+ msg->len = sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd);
+ hdr->len = sizeof(struct w1_netlink_cmd);
+ cmd->len = 0;
}
- msg->ack++;
- cn_netlink_send(msg, 0, GFP_KERNEL);
+ data = (void *)(cmd + 1) + cmd->len;
- msg->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd);
- hdr->len = sizeof(struct w1_netlink_cmd);
- cmd->len = 0;
+ *data = rn;
+ cmd->len += 8;
+ hdr->len += 8;
+ msg->len += 8;
}
-static int w1_process_search_command(struct w1_master *dev, struct cn_msg *msg,
- unsigned int avail)
+static void w1_found_send_slave(struct w1_master *dev, u64 rn)
{
- struct w1_netlink_msg *hdr = (struct w1_netlink_msg *)(msg + 1);
- struct w1_netlink_cmd *cmd = (struct w1_netlink_cmd *)(hdr + 1);
- int search_type = (cmd->cmd == W1_CMD_ALARM_SEARCH)?W1_ALARM_SEARCH:W1_SEARCH;
+ /* update kernel slave list */
+ w1_slave_found(dev, rn);
+
+ w1_send_slave(dev, rn);
+}
+
+/* Get the current slave list, or search (with or without alarm) */
+static int w1_get_slaves(struct w1_master *dev,
+ struct cn_msg *req_msg, struct w1_netlink_msg *req_hdr,
+ struct w1_netlink_cmd *req_cmd)
+{
+ struct cn_msg *msg;
+ struct w1_netlink_msg *hdr;
+ struct w1_netlink_cmd *cmd;
+ struct w1_slave *sl;
+
+ msg = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->id = req_msg->id;
+ msg->seq = req_msg->seq;
+ msg->ack = 0;
+ msg->len = sizeof(struct w1_netlink_msg) +
+ sizeof(struct w1_netlink_cmd);
+
+ hdr = (struct w1_netlink_msg *)(msg + 1);
+ cmd = (struct w1_netlink_cmd *)(hdr + 1);
+
+ hdr->type = W1_MASTER_CMD;
+ hdr->id = req_hdr->id;
+ hdr->len = sizeof(struct w1_netlink_cmd);
+
+ cmd->cmd = req_cmd->cmd;
+ cmd->len = 0;
dev->priv = msg;
- dev->priv_size = avail;
+ dev->priv_size = PAGE_SIZE - msg->len - sizeof(struct cn_msg);
- w1_search_process_cb(dev, search_type, w1_send_slave);
+ if (req_cmd->cmd == W1_CMD_LIST_SLAVES) {
+ __u64 rn;
+ mutex_lock(&dev->list_mutex);
+ list_for_each_entry(sl, &dev->slist, w1_slave_entry) {
+ memcpy(&rn, &sl->reg_num, sizeof(rn));
+ w1_send_slave(dev, rn);
+ }
+ mutex_unlock(&dev->list_mutex);
+ } else {
+ w1_search_process_cb(dev, cmd->cmd == W1_CMD_ALARM_SEARCH ?
+ W1_ALARM_SEARCH : W1_SEARCH, w1_found_send_slave);
+ }
msg->ack = 0;
- cn_netlink_send(msg, 0, GFP_KERNEL);
+ cn_netlink_send(msg, dev->portid, 0, GFP_KERNEL);
dev->priv = NULL;
dev->priv_size = 0;
+ kfree(msg);
+
return 0;
}
static int w1_send_read_reply(struct cn_msg *msg, struct w1_netlink_msg *hdr,
- struct w1_netlink_cmd *cmd)
+ struct w1_netlink_cmd *cmd, u32 portid)
{
void *data;
struct w1_netlink_msg *h;
@@ -131,7 +173,7 @@
memcpy(c->data, cmd->data, c->len);
- err = cn_netlink_send(cm, 0, GFP_KERNEL);
+ err = cn_netlink_send(cm, portid, 0, GFP_KERNEL);
kfree(data);
@@ -146,11 +188,11 @@
switch (cmd->cmd) {
case W1_CMD_TOUCH:
w1_touch_block(dev, cmd->data, cmd->len);
- w1_send_read_reply(msg, hdr, cmd);
+ w1_send_read_reply(msg, hdr, cmd, dev->portid);
break;
case W1_CMD_READ:
w1_read_block(dev, cmd->data, cmd->len);
- w1_send_read_reply(msg, hdr, cmd);
+ w1_send_read_reply(msg, hdr, cmd, dev->portid);
break;
case W1_CMD_WRITE:
w1_write_block(dev, cmd->data, cmd->len);
@@ -163,38 +205,57 @@
return err;
}
-static int w1_process_command_master(struct w1_master *dev, struct cn_msg *req_msg,
- struct w1_netlink_msg *req_hdr, struct w1_netlink_cmd *req_cmd)
+static int w1_process_command_addremove(struct w1_master *dev,
+ struct cn_msg *msg, struct w1_netlink_msg *hdr,
+ struct w1_netlink_cmd *cmd)
+{
+ struct w1_slave *sl;
+ int err = 0;
+ struct w1_reg_num *id;
+
+ if (cmd->len != 8)
+ return -EINVAL;
+
+ id = (struct w1_reg_num *)cmd->data;
+
+ sl = w1_slave_search_device(dev, id);
+ switch (cmd->cmd) {
+ case W1_CMD_SLAVE_ADD:
+ if (sl)
+ err = -EINVAL;
+ else
+ err = w1_attach_slave_device(dev, id);
+ break;
+ case W1_CMD_SLAVE_REMOVE:
+ if (sl)
+ w1_slave_detach(sl);
+ else
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static int w1_process_command_master(struct w1_master *dev,
+ struct cn_msg *req_msg, struct w1_netlink_msg *req_hdr,
+ struct w1_netlink_cmd *req_cmd)
{
int err = -EINVAL;
- struct cn_msg *msg;
- struct w1_netlink_msg *hdr;
- struct w1_netlink_cmd *cmd;
- msg = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!msg)
- return -ENOMEM;
-
- msg->id = req_msg->id;
- msg->seq = req_msg->seq;
- msg->ack = 0;
- msg->len = sizeof(struct w1_netlink_msg) + sizeof(struct w1_netlink_cmd);
-
- hdr = (struct w1_netlink_msg *)(msg + 1);
- cmd = (struct w1_netlink_cmd *)(hdr + 1);
-
- hdr->type = W1_MASTER_CMD;
- hdr->id = req_hdr->id;
- hdr->len = sizeof(struct w1_netlink_cmd);
-
- cmd->cmd = req_cmd->cmd;
- cmd->len = 0;
-
- switch (cmd->cmd) {
+ /* drop bus_mutex for search (does it's own locking), and add/remove
+ * which doesn't use the bus
+ */
+ switch (req_cmd->cmd) {
case W1_CMD_SEARCH:
case W1_CMD_ALARM_SEARCH:
- err = w1_process_search_command(dev, msg,
- PAGE_SIZE - msg->len - sizeof(struct cn_msg));
+ case W1_CMD_LIST_SLAVES:
+ mutex_unlock(&dev->bus_mutex);
+ err = w1_get_slaves(dev, req_msg, req_hdr, req_cmd);
+ mutex_lock(&dev->bus_mutex);
break;
case W1_CMD_READ:
case W1_CMD_WRITE:
@@ -204,12 +265,20 @@
case W1_CMD_RESET:
err = w1_reset_bus(dev);
break;
+ case W1_CMD_SLAVE_ADD:
+ case W1_CMD_SLAVE_REMOVE:
+ mutex_unlock(&dev->bus_mutex);
+ mutex_lock(&dev->mutex);
+ err = w1_process_command_addremove(dev, req_msg, req_hdr,
+ req_cmd);
+ mutex_unlock(&dev->mutex);
+ mutex_lock(&dev->bus_mutex);
+ break;
default:
err = -EINVAL;
break;
}
- kfree(msg);
return err;
}
@@ -223,7 +292,8 @@
return w1_process_command_io(sl->master, msg, hdr, cmd);
}
-static int w1_process_command_root(struct cn_msg *msg, struct w1_netlink_msg *mcmd)
+static int w1_process_command_root(struct cn_msg *msg,
+ struct w1_netlink_msg *mcmd, u32 portid)
{
struct w1_master *m;
struct cn_msg *cn;
@@ -256,7 +326,7 @@
mutex_lock(&w1_mlock);
list_for_each_entry(m, &w1_masters, w1_master_entry) {
if (cn->len + sizeof(*id) > PAGE_SIZE - sizeof(struct cn_msg)) {
- cn_netlink_send(cn, 0, GFP_KERNEL);
+ cn_netlink_send(cn, portid, 0, GFP_KERNEL);
cn->ack++;
cn->len = sizeof(struct w1_netlink_msg);
w->len = 0;
@@ -269,7 +339,7 @@
id++;
}
cn->ack = 0;
- cn_netlink_send(cn, 0, GFP_KERNEL);
+ cn_netlink_send(cn, portid, 0, GFP_KERNEL);
mutex_unlock(&w1_mlock);
kfree(cn);
@@ -277,7 +347,7 @@
}
static int w1_netlink_send_error(struct cn_msg *rcmsg, struct w1_netlink_msg *rmsg,
- struct w1_netlink_cmd *rcmd, int error)
+ struct w1_netlink_cmd *rcmd, int portid, int error)
{
struct cn_msg *cmsg;
struct w1_netlink_msg *msg;
@@ -304,35 +374,147 @@
cmsg->len += sizeof(*cmd);
}
- error = cn_netlink_send(cmsg, 0, GFP_KERNEL);
+ error = cn_netlink_send(cmsg, portid, 0, GFP_KERNEL);
kfree(cmsg);
return error;
}
+/* Bundle together a reference count, the full message, and broken out
+ * commands to be executed on each w1 master kthread in one memory allocation.
+ */
+struct w1_cb_block {
+ atomic_t refcnt;
+ u32 portid; /* Sending process port ID */
+ struct cn_msg msg;
+ /* cn_msg data */
+ /* one or more variable length struct w1_cb_node */
+};
+struct w1_cb_node {
+ struct w1_async_cmd async;
+ /* pointers within w1_cb_block and msg data */
+ struct w1_cb_block *block;
+ struct w1_netlink_msg *m;
+ struct w1_slave *sl;
+ struct w1_master *dev;
+};
+
+static void w1_process_cb(struct w1_master *dev, struct w1_async_cmd *async_cmd)
+{
+ struct w1_cb_node *node = container_of(async_cmd, struct w1_cb_node,
+ async);
+ u16 mlen = node->m->len;
+ u8 *cmd_data = node->m->data;
+ int err = 0;
+ struct w1_slave *sl = node->sl;
+ struct w1_netlink_cmd *cmd = NULL;
+
+ mutex_lock(&dev->bus_mutex);
+ dev->portid = node->block->portid;
+ if (sl && w1_reset_select_slave(sl))
+ err = -ENODEV;
+
+ while (mlen && !err) {
+ cmd = (struct w1_netlink_cmd *)cmd_data;
+
+ if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (sl)
+ err = w1_process_command_slave(sl, &node->block->msg,
+ node->m, cmd);
+ else
+ err = w1_process_command_master(dev, &node->block->msg,
+ node->m, cmd);
+
+ w1_netlink_send_error(&node->block->msg, node->m, cmd,
+ node->block->portid, err);
+ err = 0;
+
+ cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
+ mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
+ }
+
+ if (!cmd || err)
+ w1_netlink_send_error(&node->block->msg, node->m, cmd,
+ node->block->portid, err);
+
+ if (sl)
+ w1_unref_slave(sl);
+ else
+ atomic_dec(&dev->refcnt);
+ dev->portid = 0;
+ mutex_unlock(&dev->bus_mutex);
+
+ mutex_lock(&dev->list_mutex);
+ list_del(&async_cmd->async_entry);
+ mutex_unlock(&dev->list_mutex);
+
+ if (atomic_sub_return(1, &node->block->refcnt) == 0)
+ kfree(node->block);
+}
+
static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
- struct w1_netlink_cmd *cmd;
struct w1_slave *sl;
struct w1_master *dev;
+ u16 msg_len;
int err = 0;
+ struct w1_cb_block *block = NULL;
+ struct w1_cb_node *node = NULL;
+ int node_count = 0;
- while (msg->len && !err) {
+ /* Count the number of master or slave commands there are to allocate
+ * space for one cb_node each.
+ */
+ msg_len = msg->len;
+ while (msg_len && !err) {
+ if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
+ err = -E2BIG;
+ break;
+ }
+
+ if (m->type == W1_MASTER_CMD || m->type == W1_SLAVE_CMD)
+ ++node_count;
+
+ msg_len -= sizeof(struct w1_netlink_msg) + m->len;
+ m = (struct w1_netlink_msg *)(((u8 *)m) +
+ sizeof(struct w1_netlink_msg) + m->len);
+ }
+ m = (struct w1_netlink_msg *)(msg + 1);
+ if (node_count) {
+ /* msg->len doesn't include itself */
+ long size = sizeof(struct w1_cb_block) + msg->len +
+ node_count*sizeof(struct w1_cb_node);
+ block = kmalloc(size, GFP_KERNEL);
+ if (!block) {
+ w1_netlink_send_error(msg, m, NULL, nsp->portid,
+ -ENOMEM);
+ return;
+ }
+ atomic_set(&block->refcnt, 1);
+ block->portid = nsp->portid;
+ memcpy(&block->msg, msg, sizeof(*msg) + msg->len);
+ node = (struct w1_cb_node *)((u8 *)block->msg.data + msg->len);
+ }
+
+ msg_len = msg->len;
+ while (msg_len && !err) {
struct w1_reg_num id;
u16 mlen = m->len;
- u8 *cmd_data = m->data;
dev = NULL;
sl = NULL;
- cmd = NULL;
memcpy(&id, m->id.id, sizeof(id));
#if 0
printk("%s: %02x.%012llx.%02x: type=%02x, len=%u.\n",
__func__, id.family, (unsigned long long)id.id, id.crc, m->type, m->len);
#endif
- if (m->len + sizeof(struct w1_netlink_msg) > msg->len) {
+ if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
err = -E2BIG;
break;
}
@@ -344,7 +526,7 @@
if (sl)
dev = sl->master;
} else {
- err = w1_process_command_root(msg, m);
+ err = w1_process_command_root(msg, m, nsp->portid);
goto out_cont;
}
@@ -357,41 +539,24 @@
if (!mlen)
goto out_cont;
- mutex_lock(&dev->mutex);
+ atomic_inc(&block->refcnt);
+ node->async.cb = w1_process_cb;
+ node->block = block;
+ node->m = (struct w1_netlink_msg *)((u8 *)&block->msg +
+ (size_t)((u8 *)m - (u8 *)msg));
+ node->sl = sl;
+ node->dev = dev;
- if (sl && w1_reset_select_slave(sl)) {
- err = -ENODEV;
- goto out_up;
- }
+ mutex_lock(&dev->list_mutex);
+ list_add_tail(&node->async.async_entry, &dev->async_list);
+ wake_up_process(dev->thread);
+ mutex_unlock(&dev->list_mutex);
+ ++node;
- while (mlen) {
- cmd = (struct w1_netlink_cmd *)cmd_data;
-
- if (cmd->len + sizeof(struct w1_netlink_cmd) > mlen) {
- err = -E2BIG;
- break;
- }
-
- if (sl)
- err = w1_process_command_slave(sl, msg, m, cmd);
- else
- err = w1_process_command_master(dev, msg, m, cmd);
-
- w1_netlink_send_error(msg, m, cmd, err);
- err = 0;
-
- cmd_data += cmd->len + sizeof(struct w1_netlink_cmd);
- mlen -= cmd->len + sizeof(struct w1_netlink_cmd);
- }
-out_up:
- atomic_dec(&dev->refcnt);
- if (sl)
- atomic_dec(&sl->refcnt);
- mutex_unlock(&dev->mutex);
out_cont:
- if (!cmd || err)
- w1_netlink_send_error(msg, m, cmd, err);
- msg->len -= sizeof(struct w1_netlink_msg) + m->len;
+ if (err)
+ w1_netlink_send_error(msg, m, NULL, nsp->portid, err);
+ msg_len -= sizeof(struct w1_netlink_msg) + m->len;
m = (struct w1_netlink_msg *)(((u8 *)m) + sizeof(struct w1_netlink_msg) + m->len);
/*
@@ -400,6 +565,8 @@
if (err == -ENODEV)
err = 0;
}
+ if (block && atomic_sub_return(1, &block->refcnt) == 0)
+ kfree(block);
}
int w1_init_netlink(void)
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index b0922dc..1e9504e 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -27,6 +27,18 @@
#include "w1.h"
+/**
+ * enum w1_netlink_message_types - message type
+ *
+ * @W1_SLAVE_ADD: notification that a slave device was added
+ * @W1_SLAVE_REMOVE: notification that a slave device was removed
+ * @W1_MASTER_ADD: notification that a new bus master was added
+ * @W1_MASTER_REMOVE: notification that a bus masterwas removed
+ * @W1_MASTER_CMD: initiate operations on a specific master
+ * @W1_SLAVE_CMD: sends reset, selects the slave, then does a read/write/touch
+ * operation
+ * @W1_LIST_MASTERS: used to determine the bus master identifiers
+ */
enum w1_netlink_message_types {
W1_SLAVE_ADD = 0,
W1_SLAVE_REMOVE,
@@ -52,6 +64,22 @@
__u8 data[0];
};
+/**
+ * enum w1_commands - commands available for master or slave operations
+ * @W1_CMD_READ: read len bytes
+ * @W1_CMD_WRITE: write len bytes
+ * @W1_CMD_SEARCH: initiate a standard search, returns only the slave
+ * devices found during that search
+ * @W1_CMD_ALARM_SEARCH: search for devices that are currently alarming
+ * @W1_CMD_TOUCH: Touches a series of bytes.
+ * @W1_CMD_RESET: sends a bus reset on the given master
+ * @W1_CMD_SLAVE_ADD: adds a slave to the given master,
+ * 8 byte slave id at data[0]
+ * @W1_CMD_SLAVE_REMOVE: removes a slave to the given master,
+ * 8 byte slave id at data[0]
+ * @W1_CMD_LIST_SLAVES: list of slaves registered on this master
+ * @W1_CMD_MAX: number of available commands
+ */
enum w1_commands {
W1_CMD_READ = 0,
W1_CMD_WRITE,
@@ -59,7 +87,10 @@
W1_CMD_ALARM_SEARCH,
W1_CMD_TOUCH,
W1_CMD_RESET,
- W1_CMD_MAX,
+ W1_CMD_SLAVE_ADD,
+ W1_CMD_SLAVE_REMOVE,
+ W1_CMD_LIST_SLAVES,
+ W1_CMD_MAX
};
struct w1_netlink_cmd
diff --git a/include/dt-bindings/spmi/spmi.h b/include/dt-bindings/spmi/spmi.h
new file mode 100644
index 0000000..d11e1e5
--- /dev/null
+++ b/include/dt-bindings/spmi/spmi.h
@@ -0,0 +1,18 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_SPMI_H
+#define __DT_BINDINGS_SPMI_H
+
+#define SPMI_USID 0
+#define SPMI_GSID 1
+
+#endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index b2b5a41..be9c4747 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -71,7 +71,7 @@
int cn_add_callback(struct cb_id *id, const char *name,
void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
void cn_del_callback(struct cb_id *);
-int cn_netlink_send(struct cn_msg *, u32, gfp_t);
+int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 group, gfp_t gfp_mask);
int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
struct cb_id *id,
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 344883d..fb66fba 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -25,325 +25,9 @@
#ifndef _HYPERV_H
#define _HYPERV_H
+#include <uapi/linux/hyperv.h>
+
#include <linux/types.h>
-
-/*
- * Framework version for util services.
- */
-#define UTIL_FW_MINOR 0
-
-#define UTIL_WS2K8_FW_MAJOR 1
-#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR)
-
-#define UTIL_FW_MAJOR 3
-#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR)
-
-
-/*
- * Implementation of host controlled snapshot of the guest.
- */
-
-#define VSS_OP_REGISTER 128
-
-enum hv_vss_op {
- VSS_OP_CREATE = 0,
- VSS_OP_DELETE,
- VSS_OP_HOT_BACKUP,
- VSS_OP_GET_DM_INFO,
- VSS_OP_BU_COMPLETE,
- /*
- * Following operations are only supported with IC version >= 5.0
- */
- VSS_OP_FREEZE, /* Freeze the file systems in the VM */
- VSS_OP_THAW, /* Unfreeze the file systems */
- VSS_OP_AUTO_RECOVER,
- VSS_OP_COUNT /* Number of operations, must be last */
-};
-
-
-/*
- * Header for all VSS messages.
- */
-struct hv_vss_hdr {
- __u8 operation;
- __u8 reserved[7];
-} __attribute__((packed));
-
-
-/*
- * Flag values for the hv_vss_check_feature. Linux supports only
- * one value.
- */
-#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005
-
-struct hv_vss_check_feature {
- __u32 flags;
-} __attribute__((packed));
-
-struct hv_vss_check_dm_info {
- __u32 flags;
-} __attribute__((packed));
-
-struct hv_vss_msg {
- union {
- struct hv_vss_hdr vss_hdr;
- int error;
- };
- union {
- struct hv_vss_check_feature vss_cf;
- struct hv_vss_check_dm_info dm_info;
- };
-} __attribute__((packed));
-
-/*
- * An implementation of HyperV key value pair (KVP) functionality for Linux.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
- *
- */
-
-/*
- * Maximum value size - used for both key names and value data, and includes
- * any applicable NULL terminators.
- *
- * Note: This limit is somewhat arbitrary, but falls easily within what is
- * supported for all native guests (back to Win 2000) and what is reasonable
- * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
- * limited to 255 character key names.
- *
- * MSDN recommends not storing data values larger than 2048 bytes in the
- * registry.
- *
- * Note: This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatibility.
- */
-
-/*
- * bytes, including any null terminators
- */
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
-
-
-/*
- * Maximum key size - the registry limit for the length of an entry name
- * is 256 characters, including the null terminator
- */
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
-
-/*
- * In Linux, we implement the KVP functionality in two components:
- * 1) The kernel component which is packaged as part of the hv_utils driver
- * is responsible for communicating with the host and responsible for
- * implementing the host/guest protocol. 2) A user level daemon that is
- * responsible for data gathering.
- *
- * Host/Guest Protocol: The host iterates over an index and expects the guest
- * to assign a key name to the index and also return the value corresponding to
- * the key. The host will have atmost one KVP transaction outstanding at any
- * given point in time. The host side iteration stops when the guest returns
- * an error. Microsoft has specified the following mapping of key names to
- * host specified index:
- *
- * Index Key Name
- * 0 FullyQualifiedDomainName
- * 1 IntegrationServicesVersion
- * 2 NetworkAddressIPv4
- * 3 NetworkAddressIPv6
- * 4 OSBuildNumber
- * 5 OSName
- * 6 OSMajorVersion
- * 7 OSMinorVersion
- * 8 OSVersion
- * 9 ProcessorArchitecture
- *
- * The Windows host expects the Key Name and Key Value to be encoded in utf16.
- *
- * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
- * data gathering functionality in a user mode daemon. The user level daemon
- * is also responsible for binding the key name to the index as well. The
- * kernel and user-level daemon communicate using a connector channel.
- *
- * The user mode component first registers with the
- * the kernel component. Subsequently, the kernel component requests, data
- * for the specified keys. In response to this message the user mode component
- * fills in the value corresponding to the specified key. We overload the
- * sequence field in the cn_msg header to define our KVP message types.
- *
- *
- * The kernel component simply acts as a conduit for communication between the
- * Windows host and the user-level daemon. The kernel component passes up the
- * index received from the Host to the user-level daemon. If the index is
- * valid (supported), the corresponding key as well as its
- * value (both are strings) is returned. If the index is invalid
- * (not supported), a NULL key string is returned.
- */
-
-
-/*
- * Registry value types.
- */
-
-#define REG_SZ 1
-#define REG_U32 4
-#define REG_U64 8
-
-/*
- * As we look at expanding the KVP functionality to include
- * IP injection functionality, we need to maintain binary
- * compatibility with older daemons.
- *
- * The KVP opcodes are defined by the host and it was unfortunate
- * that I chose to treat the registration operation as part of the
- * KVP operations defined by the host.
- * Here is the level of compatibility
- * (between the user level daemon and the kernel KVP driver) that we
- * will implement:
- *
- * An older daemon will always be supported on a newer driver.
- * A given user level daemon will require a minimal version of the
- * kernel driver.
- * If we cannot handle the version differences, we will fail gracefully
- * (this can happen when we have a user level daemon that is more
- * advanced than the KVP driver.
- *
- * We will use values used in this handshake for determining if we have
- * workable user level daemon and the kernel driver. We begin by taking the
- * registration opcode out of the KVP opcode namespace. We will however,
- * maintain compatibility with the existing user-level daemon code.
- */
-
-/*
- * Daemon code not supporting IP injection (legacy daemon).
- */
-
-#define KVP_OP_REGISTER 4
-
-/*
- * Daemon code supporting IP injection.
- * The KVP opcode field is used to communicate the
- * registration information; so define a namespace that
- * will be distinct from the host defined KVP opcode.
- */
-
-#define KVP_OP_REGISTER1 100
-
-enum hv_kvp_exchg_op {
- KVP_OP_GET = 0,
- KVP_OP_SET,
- KVP_OP_DELETE,
- KVP_OP_ENUMERATE,
- KVP_OP_GET_IP_INFO,
- KVP_OP_SET_IP_INFO,
- KVP_OP_COUNT /* Number of operations, must be last. */
-};
-
-enum hv_kvp_exchg_pool {
- KVP_POOL_EXTERNAL = 0,
- KVP_POOL_GUEST,
- KVP_POOL_AUTO,
- KVP_POOL_AUTO_EXTERNAL,
- KVP_POOL_AUTO_INTERNAL,
- KVP_POOL_COUNT /* Number of pools, must be last. */
-};
-
-/*
- * Some Hyper-V status codes.
- */
-
-#define HV_S_OK 0x00000000
-#define HV_E_FAIL 0x80004005
-#define HV_S_CONT 0x80070103
-#define HV_ERROR_NOT_SUPPORTED 0x80070032
-#define HV_ERROR_MACHINE_LOCKED 0x800704F7
-#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F
-#define HV_INVALIDARG 0x80070057
-#define HV_GUID_NOTFOUND 0x80041002
-
-#define ADDR_FAMILY_NONE 0x00
-#define ADDR_FAMILY_IPV4 0x01
-#define ADDR_FAMILY_IPV6 0x02
-
-#define MAX_ADAPTER_ID_SIZE 128
-#define MAX_IP_ADDR_SIZE 1024
-#define MAX_GATEWAY_SIZE 512
-
-
-struct hv_kvp_ipaddr_value {
- __u16 adapter_id[MAX_ADAPTER_ID_SIZE];
- __u8 addr_family;
- __u8 dhcp_enabled;
- __u16 ip_addr[MAX_IP_ADDR_SIZE];
- __u16 sub_net[MAX_IP_ADDR_SIZE];
- __u16 gate_way[MAX_GATEWAY_SIZE];
- __u16 dns_addr[MAX_IP_ADDR_SIZE];
-} __attribute__((packed));
-
-
-struct hv_kvp_hdr {
- __u8 operation;
- __u8 pool;
- __u16 pad;
-} __attribute__((packed));
-
-struct hv_kvp_exchg_msg_value {
- __u32 value_type;
- __u32 key_size;
- __u32 value_size;
- __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
- union {
- __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
- __u32 value_u32;
- __u64 value_u64;
- };
-} __attribute__((packed));
-
-struct hv_kvp_msg_enumerate {
- __u32 index;
- struct hv_kvp_exchg_msg_value data;
-} __attribute__((packed));
-
-struct hv_kvp_msg_get {
- struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg_set {
- struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg_delete {
- __u32 key_size;
- __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-};
-
-struct hv_kvp_register {
- __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-};
-
-struct hv_kvp_msg {
- union {
- struct hv_kvp_hdr kvp_hdr;
- int error;
- };
- union {
- struct hv_kvp_msg_get kvp_get;
- struct hv_kvp_msg_set kvp_set;
- struct hv_kvp_msg_delete kvp_delete;
- struct hv_kvp_msg_enumerate kvp_enum_data;
- struct hv_kvp_ipaddr_value kvp_ip_val;
- struct hv_kvp_register kvp_register;
- } body;
-} __attribute__((packed));
-
-struct hv_kvp_ip_msg {
- __u8 operation;
- __u8 pool;
- struct hv_kvp_ipaddr_value kvp_ip_val;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
#include <linux/scatterlist.h>
#include <linux/list.h>
#include <linux/uuid.h>
@@ -1043,6 +727,10 @@
* This will be NULL for the primary channel.
*/
struct vmbus_channel *primary_channel;
+ /*
+ * Support per-channel state for use by vmbus drivers.
+ */
+ void *per_channel_state;
};
static inline void set_channel_read_state(struct vmbus_channel *c, bool state)
@@ -1050,6 +738,16 @@
c->batched_reading = state;
}
+static inline void set_per_channel_state(struct vmbus_channel *c, void *s)
+{
+ c->per_channel_state = s;
+}
+
+static inline void *get_per_channel_state(struct vmbus_channel *c)
+{
+ return c->per_channel_state;
+}
+
void vmbus_onmessage(void *context);
int vmbus_request_offers(void);
@@ -1118,7 +816,7 @@
extern void vmbus_close(struct vmbus_channel *channel);
extern int vmbus_sendpacket(struct vmbus_channel *channel,
- const void *buffer,
+ void *buffer,
u32 bufferLen,
u64 requestid,
enum vmbus_packet_type type,
@@ -1459,11 +1157,13 @@
void hv_vss_deinit(void);
void hv_vss_onchannelcallback(void *);
+extern u64 hyperv_mmio_start;
+extern u64 hyperv_mmio_size;
+
/*
* Negotiated version with the Host.
*/
extern __u32 vmbus_proto_version;
-#endif /* __KERNEL__ */
#endif /* _HYPERV_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 45e9214..677e474 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -432,6 +432,14 @@
kernel_ulong_t driver_data; /* Data private to the driver */
};
+#define SPMI_NAME_SIZE 32
+#define SPMI_MODULE_PREFIX "spmi:"
+
+struct spmi_device_id {
+ char name[SPMI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
/* dmi */
enum dmi_field {
DMI_NONE,
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4149f1a..8cc73ac 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -321,8 +321,10 @@
const struct regmap_config *config);
struct regmap *regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
-struct regmap *regmap_init_spmi(struct spmi_device *dev,
- const struct regmap_config *config);
+struct regmap *regmap_init_spmi_base(struct spmi_device *dev,
+ const struct regmap_config *config);
+struct regmap *regmap_init_spmi_ext(struct spmi_device *dev,
+ const struct regmap_config *config);
struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
@@ -335,8 +337,10 @@
const struct regmap_config *config);
struct regmap *devm_regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
-struct regmap *devm_regmap_init_spmi(struct spmi_device *dev,
- const struct regmap_config *config);
+struct regmap *devm_regmap_init_spmi_base(struct spmi_device *dev,
+ const struct regmap_config *config);
+struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *dev,
+ const struct regmap_config *config);
struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
diff --git a/include/linux/spmi.h b/include/linux/spmi.h
new file mode 100644
index 0000000..91f5eab
--- /dev/null
+++ b/include/linux/spmi.h
@@ -0,0 +1,191 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef _LINUX_SPMI_H
+#define _LINUX_SPMI_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+/* Maximum slave identifier */
+#define SPMI_MAX_SLAVE_ID 16
+
+/* SPMI Commands */
+#define SPMI_CMD_EXT_WRITE 0x00
+#define SPMI_CMD_RESET 0x10
+#define SPMI_CMD_SLEEP 0x11
+#define SPMI_CMD_SHUTDOWN 0x12
+#define SPMI_CMD_WAKEUP 0x13
+#define SPMI_CMD_AUTHENTICATE 0x14
+#define SPMI_CMD_MSTR_READ 0x15
+#define SPMI_CMD_MSTR_WRITE 0x16
+#define SPMI_CMD_TRANSFER_BUS_OWNERSHIP 0x1A
+#define SPMI_CMD_DDB_MASTER_READ 0x1B
+#define SPMI_CMD_DDB_SLAVE_READ 0x1C
+#define SPMI_CMD_EXT_READ 0x20
+#define SPMI_CMD_EXT_WRITEL 0x30
+#define SPMI_CMD_EXT_READL 0x38
+#define SPMI_CMD_WRITE 0x40
+#define SPMI_CMD_READ 0x60
+#define SPMI_CMD_ZERO_WRITE 0x80
+
+/**
+ * struct spmi_device - Basic representation of an SPMI device
+ * @dev: Driver model representation of the device.
+ * @ctrl: SPMI controller managing the bus hosting this device.
+ * @usid: This devices' Unique Slave IDentifier.
+ */
+struct spmi_device {
+ struct device dev;
+ struct spmi_controller *ctrl;
+ u8 usid;
+};
+
+static inline struct spmi_device *to_spmi_device(struct device *d)
+{
+ return container_of(d, struct spmi_device, dev);
+}
+
+static inline void *spmi_device_get_drvdata(const struct spmi_device *sdev)
+{
+ return dev_get_drvdata(&sdev->dev);
+}
+
+static inline void spmi_device_set_drvdata(struct spmi_device *sdev, void *data)
+{
+ dev_set_drvdata(&sdev->dev, data);
+}
+
+struct spmi_device *spmi_device_alloc(struct spmi_controller *ctrl);
+
+static inline void spmi_device_put(struct spmi_device *sdev)
+{
+ if (sdev)
+ put_device(&sdev->dev);
+}
+
+int spmi_device_add(struct spmi_device *sdev);
+
+void spmi_device_remove(struct spmi_device *sdev);
+
+/**
+ * struct spmi_controller - interface to the SPMI master controller
+ * @dev: Driver model representation of the device.
+ * @nr: board-specific number identifier for this controller/bus
+ * @cmd: sends a non-data command sequence on the SPMI bus.
+ * @read_cmd: sends a register read command sequence on the SPMI bus.
+ * @write_cmd: sends a register write command sequence on the SPMI bus.
+ */
+struct spmi_controller {
+ struct device dev;
+ unsigned int nr;
+ int (*cmd)(struct spmi_controller *ctrl, u8 opcode, u8 sid);
+ int (*read_cmd)(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, u8 *buf, size_t len);
+ int (*write_cmd)(struct spmi_controller *ctrl, u8 opcode,
+ u8 sid, u16 addr, const u8 *buf, size_t len);
+};
+
+static inline struct spmi_controller *to_spmi_controller(struct device *d)
+{
+ return container_of(d, struct spmi_controller, dev);
+}
+
+static inline
+void *spmi_controller_get_drvdata(const struct spmi_controller *ctrl)
+{
+ return dev_get_drvdata(&ctrl->dev);
+}
+
+static inline void spmi_controller_set_drvdata(struct spmi_controller *ctrl,
+ void *data)
+{
+ dev_set_drvdata(&ctrl->dev, data);
+}
+
+struct spmi_controller *spmi_controller_alloc(struct device *parent,
+ size_t size);
+
+/**
+ * spmi_controller_put() - decrement controller refcount
+ * @ctrl SPMI controller.
+ */
+static inline void spmi_controller_put(struct spmi_controller *ctrl)
+{
+ if (ctrl)
+ put_device(&ctrl->dev);
+}
+
+int spmi_controller_add(struct spmi_controller *ctrl);
+void spmi_controller_remove(struct spmi_controller *ctrl);
+
+/**
+ * struct spmi_driver - SPMI slave device driver
+ * @driver: SPMI device drivers should initialize name and owner field of
+ * this structure.
+ * @probe: binds this driver to a SPMI device.
+ * @remove: unbinds this driver from the SPMI device.
+ * @shutdown: standard shutdown callback used during powerdown/halt.
+ * @suspend: standard suspend callback used during system suspend.
+ * @resume: standard resume callback used during system resume.
+ *
+ * If PM runtime support is desired for a slave, a device driver can call
+ * pm_runtime_put() from their probe() routine (and a balancing
+ * pm_runtime_get() in remove()). PM runtime support for a slave is
+ * implemented by issuing a SLEEP command to the slave on runtime_suspend(),
+ * transitioning the slave into the SLEEP state. On runtime_resume(), a WAKEUP
+ * command is sent to the slave to bring it back to ACTIVE.
+ */
+struct spmi_driver {
+ struct device_driver driver;
+ int (*probe)(struct spmi_device *sdev);
+ void (*remove)(struct spmi_device *sdev);
+};
+
+static inline struct spmi_driver *to_spmi_driver(struct device_driver *d)
+{
+ return container_of(d, struct spmi_driver, driver);
+}
+
+int spmi_driver_register(struct spmi_driver *sdrv);
+
+/**
+ * spmi_driver_unregister() - unregister an SPMI client driver
+ * @sdrv: the driver to unregister
+ */
+static inline void spmi_driver_unregister(struct spmi_driver *sdrv)
+{
+ if (sdrv)
+ driver_unregister(&sdrv->driver);
+}
+
+#define module_spmi_driver(__spmi_driver) \
+ module_driver(__spmi_driver, spmi_driver_register, \
+ spmi_driver_unregister)
+
+int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf);
+int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf,
+ size_t len);
+int spmi_ext_register_readl(struct spmi_device *sdev, u16 addr, u8 *buf,
+ size_t len);
+int spmi_register_write(struct spmi_device *sdev, u8 addr, u8 data);
+int spmi_register_zero_write(struct spmi_device *sdev, u8 data);
+int spmi_ext_register_write(struct spmi_device *sdev, u8 addr,
+ const u8 *buf, size_t len);
+int spmi_ext_register_writel(struct spmi_device *sdev, u16 addr,
+ const u8 *buf, size_t len);
+int spmi_command_reset(struct spmi_device *sdev);
+int spmi_command_sleep(struct spmi_device *sdev);
+int spmi_command_wakeup(struct spmi_device *sdev);
+int spmi_command_shutdown(struct spmi_device *sdev);
+
+#endif
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 3ce25b5..6929571 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -139,6 +139,7 @@
header-y += hiddev.h
header-y += hidraw.h
header-y += hpet.h
+header-y += hyperv.h
header-y += hysdn_if.h
header-y += i2c-dev.h
header-y += i2c.h
diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h
new file mode 100644
index 0000000..1861f8e
--- /dev/null
+++ b/include/uapi/linux/hyperv.h
@@ -0,0 +1,344 @@
+/*
+ *
+ * Copyright (c) 2011, Microsoft Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Authors:
+ * Haiyang Zhang <haiyangz@microsoft.com>
+ * Hank Janssen <hjanssen@microsoft.com>
+ * K. Y. Srinivasan <kys@microsoft.com>
+ *
+ */
+
+#ifndef _UAPI_HYPERV_H
+#define _UAPI_HYPERV_H
+
+/*
+ * Framework version for util services.
+ */
+#define UTIL_FW_MINOR 0
+
+#define UTIL_WS2K8_FW_MAJOR 1
+#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 | UTIL_FW_MINOR)
+
+#define UTIL_FW_MAJOR 3
+#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR)
+
+
+/*
+ * Implementation of host controlled snapshot of the guest.
+ */
+
+#define VSS_OP_REGISTER 128
+
+enum hv_vss_op {
+ VSS_OP_CREATE = 0,
+ VSS_OP_DELETE,
+ VSS_OP_HOT_BACKUP,
+ VSS_OP_GET_DM_INFO,
+ VSS_OP_BU_COMPLETE,
+ /*
+ * Following operations are only supported with IC version >= 5.0
+ */
+ VSS_OP_FREEZE, /* Freeze the file systems in the VM */
+ VSS_OP_THAW, /* Unfreeze the file systems */
+ VSS_OP_AUTO_RECOVER,
+ VSS_OP_COUNT /* Number of operations, must be last */
+};
+
+
+/*
+ * Header for all VSS messages.
+ */
+struct hv_vss_hdr {
+ __u8 operation;
+ __u8 reserved[7];
+} __attribute__((packed));
+
+
+/*
+ * Flag values for the hv_vss_check_feature. Linux supports only
+ * one value.
+ */
+#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005
+
+struct hv_vss_check_feature {
+ __u32 flags;
+} __attribute__((packed));
+
+struct hv_vss_check_dm_info {
+ __u32 flags;
+} __attribute__((packed));
+
+struct hv_vss_msg {
+ union {
+ struct hv_vss_hdr vss_hdr;
+ int error;
+ };
+ union {
+ struct hv_vss_check_feature vss_cf;
+ struct hv_vss_check_dm_info dm_info;
+ };
+} __attribute__((packed));
+
+/*
+ * An implementation of HyperV key value pair (KVP) functionality for Linux.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ */
+
+/*
+ * Maximum value size - used for both key names and value data, and includes
+ * any applicable NULL terminators.
+ *
+ * Note: This limit is somewhat arbitrary, but falls easily within what is
+ * supported for all native guests (back to Win 2000) and what is reasonable
+ * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
+ * limited to 255 character key names.
+ *
+ * MSDN recommends not storing data values larger than 2048 bytes in the
+ * registry.
+ *
+ * Note: This value is used in defining the KVP exchange message - this value
+ * cannot be modified without affecting the message size and compatibility.
+ */
+
+/*
+ * bytes, including any null terminators
+ */
+#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
+
+
+/*
+ * Maximum key size - the registry limit for the length of an entry name
+ * is 256 characters, including the null terminator
+ */
+
+#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
+
+/*
+ * In Linux, we implement the KVP functionality in two components:
+ * 1) The kernel component which is packaged as part of the hv_utils driver
+ * is responsible for communicating with the host and responsible for
+ * implementing the host/guest protocol. 2) A user level daemon that is
+ * responsible for data gathering.
+ *
+ * Host/Guest Protocol: The host iterates over an index and expects the guest
+ * to assign a key name to the index and also return the value corresponding to
+ * the key. The host will have atmost one KVP transaction outstanding at any
+ * given point in time. The host side iteration stops when the guest returns
+ * an error. Microsoft has specified the following mapping of key names to
+ * host specified index:
+ *
+ * Index Key Name
+ * 0 FullyQualifiedDomainName
+ * 1 IntegrationServicesVersion
+ * 2 NetworkAddressIPv4
+ * 3 NetworkAddressIPv6
+ * 4 OSBuildNumber
+ * 5 OSName
+ * 6 OSMajorVersion
+ * 7 OSMinorVersion
+ * 8 OSVersion
+ * 9 ProcessorArchitecture
+ *
+ * The Windows host expects the Key Name and Key Value to be encoded in utf16.
+ *
+ * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
+ * data gathering functionality in a user mode daemon. The user level daemon
+ * is also responsible for binding the key name to the index as well. The
+ * kernel and user-level daemon communicate using a connector channel.
+ *
+ * The user mode component first registers with the
+ * the kernel component. Subsequently, the kernel component requests, data
+ * for the specified keys. In response to this message the user mode component
+ * fills in the value corresponding to the specified key. We overload the
+ * sequence field in the cn_msg header to define our KVP message types.
+ *
+ *
+ * The kernel component simply acts as a conduit for communication between the
+ * Windows host and the user-level daemon. The kernel component passes up the
+ * index received from the Host to the user-level daemon. If the index is
+ * valid (supported), the corresponding key as well as its
+ * value (both are strings) is returned. If the index is invalid
+ * (not supported), a NULL key string is returned.
+ */
+
+
+/*
+ * Registry value types.
+ */
+
+#define REG_SZ 1
+#define REG_U32 4
+#define REG_U64 8
+
+/*
+ * As we look at expanding the KVP functionality to include
+ * IP injection functionality, we need to maintain binary
+ * compatibility with older daemons.
+ *
+ * The KVP opcodes are defined by the host and it was unfortunate
+ * that I chose to treat the registration operation as part of the
+ * KVP operations defined by the host.
+ * Here is the level of compatibility
+ * (between the user level daemon and the kernel KVP driver) that we
+ * will implement:
+ *
+ * An older daemon will always be supported on a newer driver.
+ * A given user level daemon will require a minimal version of the
+ * kernel driver.
+ * If we cannot handle the version differences, we will fail gracefully
+ * (this can happen when we have a user level daemon that is more
+ * advanced than the KVP driver.
+ *
+ * We will use values used in this handshake for determining if we have
+ * workable user level daemon and the kernel driver. We begin by taking the
+ * registration opcode out of the KVP opcode namespace. We will however,
+ * maintain compatibility with the existing user-level daemon code.
+ */
+
+/*
+ * Daemon code not supporting IP injection (legacy daemon).
+ */
+
+#define KVP_OP_REGISTER 4
+
+/*
+ * Daemon code supporting IP injection.
+ * The KVP opcode field is used to communicate the
+ * registration information; so define a namespace that
+ * will be distinct from the host defined KVP opcode.
+ */
+
+#define KVP_OP_REGISTER1 100
+
+enum hv_kvp_exchg_op {
+ KVP_OP_GET = 0,
+ KVP_OP_SET,
+ KVP_OP_DELETE,
+ KVP_OP_ENUMERATE,
+ KVP_OP_GET_IP_INFO,
+ KVP_OP_SET_IP_INFO,
+ KVP_OP_COUNT /* Number of operations, must be last. */
+};
+
+enum hv_kvp_exchg_pool {
+ KVP_POOL_EXTERNAL = 0,
+ KVP_POOL_GUEST,
+ KVP_POOL_AUTO,
+ KVP_POOL_AUTO_EXTERNAL,
+ KVP_POOL_AUTO_INTERNAL,
+ KVP_POOL_COUNT /* Number of pools, must be last. */
+};
+
+/*
+ * Some Hyper-V status codes.
+ */
+
+#define HV_S_OK 0x00000000
+#define HV_E_FAIL 0x80004005
+#define HV_S_CONT 0x80070103
+#define HV_ERROR_NOT_SUPPORTED 0x80070032
+#define HV_ERROR_MACHINE_LOCKED 0x800704F7
+#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F
+#define HV_INVALIDARG 0x80070057
+#define HV_GUID_NOTFOUND 0x80041002
+
+#define ADDR_FAMILY_NONE 0x00
+#define ADDR_FAMILY_IPV4 0x01
+#define ADDR_FAMILY_IPV6 0x02
+
+#define MAX_ADAPTER_ID_SIZE 128
+#define MAX_IP_ADDR_SIZE 1024
+#define MAX_GATEWAY_SIZE 512
+
+
+struct hv_kvp_ipaddr_value {
+ __u16 adapter_id[MAX_ADAPTER_ID_SIZE];
+ __u8 addr_family;
+ __u8 dhcp_enabled;
+ __u16 ip_addr[MAX_IP_ADDR_SIZE];
+ __u16 sub_net[MAX_IP_ADDR_SIZE];
+ __u16 gate_way[MAX_GATEWAY_SIZE];
+ __u16 dns_addr[MAX_IP_ADDR_SIZE];
+} __attribute__((packed));
+
+
+struct hv_kvp_hdr {
+ __u8 operation;
+ __u8 pool;
+ __u16 pad;
+} __attribute__((packed));
+
+struct hv_kvp_exchg_msg_value {
+ __u32 value_type;
+ __u32 key_size;
+ __u32 value_size;
+ __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+ union {
+ __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
+ __u32 value_u32;
+ __u64 value_u64;
+ };
+} __attribute__((packed));
+
+struct hv_kvp_msg_enumerate {
+ __u32 index;
+ struct hv_kvp_exchg_msg_value data;
+} __attribute__((packed));
+
+struct hv_kvp_msg_get {
+ struct hv_kvp_exchg_msg_value data;
+};
+
+struct hv_kvp_msg_set {
+ struct hv_kvp_exchg_msg_value data;
+};
+
+struct hv_kvp_msg_delete {
+ __u32 key_size;
+ __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+};
+
+struct hv_kvp_register {
+ __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+};
+
+struct hv_kvp_msg {
+ union {
+ struct hv_kvp_hdr kvp_hdr;
+ int error;
+ };
+ union {
+ struct hv_kvp_msg_get kvp_get;
+ struct hv_kvp_msg_set kvp_set;
+ struct hv_kvp_msg_delete kvp_delete;
+ struct hv_kvp_msg_enumerate kvp_enum_data;
+ struct hv_kvp_ipaddr_value kvp_ip_val;
+ struct hv_kvp_register kvp_register;
+ } body;
+} __attribute__((packed));
+
+struct hv_kvp_ip_msg {
+ __u8 operation;
+ __u8 pool;
+ struct hv_kvp_ipaddr_value kvp_ip_val;
+} __attribute__((packed));
+
+#endif /* _UAPI_HYPERV_H */
diff --git a/tools/Makefile b/tools/Makefile
index feec3ad..bcae806 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -7,6 +7,7 @@
@echo ' cgroup - cgroup tools'
@echo ' cpupower - a tool for all things x86 CPU power'
@echo ' firewire - the userspace part of nosy, an IEEE-1394 traffic sniffer'
+ @echo ' hv - tools used when in Hyper-V clients'
@echo ' lguest - a minimal 32-bit x86 hypervisor'
@echo ' perf - Linux performance measurement and analysis tool'
@echo ' selftests - various kernel selftests'
@@ -40,7 +41,7 @@
cpupower: FORCE
$(call descend,power/$@)
-cgroup firewire guest usb virtio vm net: FORCE
+cgroup firewire hv guest usb virtio vm net: FORCE
$(call descend,$@)
libapikfs: FORCE
@@ -64,7 +65,7 @@
cpupower_install:
$(call descend,power/$(@:_install=),install)
-cgroup_install firewire_install lguest_install perf_install usb_install virtio_install vm_install net_install:
+cgroup_install firewire_install hv_install lguest_install perf_install usb_install virtio_install vm_install net_install:
$(call descend,$(@:_install=),install)
selftests_install:
@@ -76,7 +77,7 @@
tmon_install:
$(call descend,thermal/$(@:_install=),install)
-install: acpi_install cgroup_install cpupower_install firewire_install lguest_install \
+install: acpi_install cgroup_install cpupower_install hv_install firewire_install lguest_install \
perf_install selftests_install turbostat_install usb_install \
virtio_install vm_install net_install x86_energy_perf_policy_install \
tmon
@@ -87,7 +88,7 @@
cpupower_clean:
$(call descend,power/cpupower,clean)
-cgroup_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean:
+cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean:
$(call descend,$(@:_clean=),clean)
libapikfs_clean:
@@ -105,7 +106,7 @@
tmon_clean:
$(call descend,thermal/tmon,clean)
-clean: acpi_clean cgroup_clean cpupower_clean firewire_clean lguest_clean \
+clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean lguest_clean \
perf_clean selftests_clean turbostat_clean usb_clean virtio_clean \
vm_clean net_clean x86_energy_perf_policy_clean tmon_clean
diff --git a/tools/hv/Makefile b/tools/hv/Makefile
new file mode 100644
index 0000000..bd22f78
--- /dev/null
+++ b/tools/hv/Makefile
@@ -0,0 +1,13 @@
+# Makefile for Hyper-V tools
+
+CC = $(CROSS_COMPILE)gcc
+PTHREAD_LIBS = -lpthread
+WARNINGS = -Wall -Wextra
+CFLAGS = $(WARNINGS) -g $(PTHREAD_LIBS)
+
+all: hv_kvp_daemon hv_vss_daemon
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+clean:
+ $(RM) hv_kvp_daemon hv_vss_daemon
diff --git a/tools/hv/hv_vss_daemon.c b/tools/hv/hv_vss_daemon.c
index 520de3304..6a213b8 100644
--- a/tools/hv/hv_vss_daemon.c
+++ b/tools/hv/hv_vss_daemon.c
@@ -87,6 +87,8 @@
continue;
if (strcmp(ent->mnt_type, "iso9660") == 0)
continue;
+ if (strcmp(ent->mnt_type, "vfat") == 0)
+ continue;
if (strcmp(ent->mnt_dir, "/") == 0) {
root_seen = 1;
continue;
