blob: ba6b312ff8a58145a834cf424caad44d26efef4d [file] [log] [blame]
* Clock bindings for Freescale i.MX25
Required properties:
- compatible: Should be "fsl,imx25-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX25
clocks and IDs.
Clock ID
---------------------------
dummy 0
osc 1
mpll 2
upll 3
mpll_cpu_3_4 4
cpu_sel 5
cpu 6
ahb 7
usb_div 8
ipg 9
per0_sel 10
per1_sel 11
per2_sel 12
per3_sel 13
per4_sel 14
per5_sel 15
per6_sel 16
per7_sel 17
per8_sel 18
per9_sel 19
per10_sel 20
per11_sel 21
per12_sel 22
per13_sel 23
per14_sel 24
per15_sel 25
per0 26
per1 27
per2 28
per3 29
per4 30
per5 31
per6 32
per7 33
per8 34
per9 35
per10 36
per11 37
per12 38
per13 39
per14 40
per15 41
csi_ipg_per 42
epit_ipg_per 43
esai_ipg_per 44
esdhc1_ipg_per 45
esdhc2_ipg_per 46
gpt_ipg_per 47
i2c_ipg_per 48
lcdc_ipg_per 49
nfc_ipg_per 50
owire_ipg_per 51
pwm_ipg_per 52
sim1_ipg_per 53
sim2_ipg_per 54
ssi1_ipg_per 55
ssi2_ipg_per 56
uart_ipg_per 57
ata_ahb 58
reserved 59
csi_ahb 60
emi_ahb 61
esai_ahb 62
esdhc1_ahb 63
esdhc2_ahb 64
fec_ahb 65
lcdc_ahb 66
rtic_ahb 67
sdma_ahb 68
slcdc_ahb 69
usbotg_ahb 70
reserved 71
reserved 72
reserved 73
reserved 74
can1_ipg 75
can2_ipg 76
csi_ipg 77
cspi1_ipg 78
cspi2_ipg 79
cspi3_ipg 80
dryice_ipg 81
ect_ipg 82
epit1_ipg 83
epit2_ipg 84
reserved 85
esdhc1_ipg 86
esdhc2_ipg 87
fec_ipg 88
reserved 89
reserved 90
reserved 91
gpt1_ipg 92
gpt2_ipg 93
gpt3_ipg 94
gpt4_ipg 95
reserved 96
reserved 97
reserved 98
iim_ipg 99
reserved 100
reserved 101
kpp_ipg 102
lcdc_ipg 103
reserved 104
pwm1_ipg 105
pwm2_ipg 106
pwm3_ipg 107
pwm4_ipg 108
rngb_ipg 109
reserved 110
scc_ipg 111
sdma_ipg 112
sim1_ipg 113
sim2_ipg 114
slcdc_ipg 115
spba_ipg 116
ssi1_ipg 117
ssi2_ipg 118
tsc_ipg 119
uart1_ipg 120
uart2_ipg 121
uart3_ipg 122
uart4_ipg 123
uart5_ipg 124
reserved 125
wdt_ipg 126
cko_div 127
cko_sel 128
cko 129
Examples:
clks: ccm@53f80000 {
compatible = "fsl,imx25-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>;
};
uart1: serial@43f90000 {
compatible = "fsl,imx25-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
clocks = <&clks 79>, <&clks 50>;
clock-names = "ipg", "per";
status = "disabled";
};