| /* | |
| * linux/arch/arm/mach-mmp/jasper.c | |
| * | |
| * Support for the Marvell Jasper Development Platform. | |
| * | |
| * Copyright (C) 2009-2010 Marvell International Ltd. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * publishhed by the Free Software Foundation. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/gpio-pxa.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/io.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regulator/max8649.h> | |
| #include <linux/mfd/max8925.h> | |
| #include <linux/interrupt.h> | |
| #include <mach/irqs.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <mach/addr-map.h> | |
| #include <mach/mfp-mmp2.h> | |
| #include <mach/mmp2.h> | |
| #include "common.h" | |
| #define JASPER_NR_IRQS (MMP_NR_IRQS + 48) | |
| static unsigned long jasper_pin_config[] __initdata = { | |
| /* UART1 */ | |
| GPIO29_UART1_RXD, | |
| GPIO30_UART1_TXD, | |
| /* UART3 */ | |
| GPIO51_UART3_RXD, | |
| GPIO52_UART3_TXD, | |
| /* DFI */ | |
| GPIO168_DFI_D0, | |
| GPIO167_DFI_D1, | |
| GPIO166_DFI_D2, | |
| GPIO165_DFI_D3, | |
| GPIO107_DFI_D4, | |
| GPIO106_DFI_D5, | |
| GPIO105_DFI_D6, | |
| GPIO104_DFI_D7, | |
| GPIO111_DFI_D8, | |
| GPIO164_DFI_D9, | |
| GPIO163_DFI_D10, | |
| GPIO162_DFI_D11, | |
| GPIO161_DFI_D12, | |
| GPIO110_DFI_D13, | |
| GPIO109_DFI_D14, | |
| GPIO108_DFI_D15, | |
| GPIO143_ND_nCS0, | |
| GPIO144_ND_nCS1, | |
| GPIO147_ND_nWE, | |
| GPIO148_ND_nRE, | |
| GPIO150_ND_ALE, | |
| GPIO149_ND_CLE, | |
| GPIO112_ND_RDY0, | |
| GPIO160_ND_RDY1, | |
| /* PMIC */ | |
| PMIC_PMIC_INT | MFP_LPM_EDGE_FALL, | |
| /* MMC1 */ | |
| GPIO131_MMC1_DAT3, | |
| GPIO132_MMC1_DAT2, | |
| GPIO133_MMC1_DAT1, | |
| GPIO134_MMC1_DAT0, | |
| GPIO136_MMC1_CMD, | |
| GPIO139_MMC1_CLK, | |
| GPIO140_MMC1_CD, | |
| GPIO141_MMC1_WP, | |
| /* MMC2 */ | |
| GPIO37_MMC2_DAT3, | |
| GPIO38_MMC2_DAT2, | |
| GPIO39_MMC2_DAT1, | |
| GPIO40_MMC2_DAT0, | |
| GPIO41_MMC2_CMD, | |
| GPIO42_MMC2_CLK, | |
| /* MMC3 */ | |
| GPIO165_MMC3_DAT7, | |
| GPIO162_MMC3_DAT6, | |
| GPIO166_MMC3_DAT5, | |
| GPIO163_MMC3_DAT4, | |
| GPIO167_MMC3_DAT3, | |
| GPIO164_MMC3_DAT2, | |
| GPIO168_MMC3_DAT1, | |
| GPIO111_MMC3_DAT0, | |
| GPIO112_MMC3_CMD, | |
| GPIO151_MMC3_CLK, | |
| }; | |
| static struct pxa_gpio_platform_data mmp2_gpio_pdata = { | |
| .irq_base = MMP_GPIO_TO_IRQ(0), | |
| }; | |
| static struct regulator_consumer_supply max8649_supply[] = { | |
| REGULATOR_SUPPLY("vcc_core", NULL), | |
| }; | |
| static struct regulator_init_data max8649_init_data = { | |
| .constraints = { | |
| .name = "vcc_core range", | |
| .min_uV = 1150000, | |
| .max_uV = 1280000, | |
| .always_on = 1, | |
| .boot_on = 1, | |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, | |
| }, | |
| .num_consumer_supplies = 1, | |
| .consumer_supplies = &max8649_supply[0], | |
| }; | |
| static struct max8649_platform_data jasper_max8649_info = { | |
| .mode = 2, /* VID1 = 1, VID0 = 0 */ | |
| .extclk = 0, | |
| .ramp_timing = MAX8649_RAMP_32MV, | |
| .regulator = &max8649_init_data, | |
| }; | |
| static struct max8925_backlight_pdata jasper_backlight_data = { | |
| .dual_string = 0, | |
| }; | |
| static struct max8925_power_pdata jasper_power_data = { | |
| .batt_detect = 0, /* can't detect battery by ID pin */ | |
| .topoff_threshold = MAX8925_TOPOFF_THR_10PER, | |
| .fast_charge = MAX8925_FCHG_1000MA, | |
| }; | |
| static struct max8925_platform_data jasper_max8925_info = { | |
| .backlight = &jasper_backlight_data, | |
| .power = &jasper_power_data, | |
| .irq_base = MMP_NR_IRQS, | |
| }; | |
| static struct i2c_board_info jasper_twsi1_info[] = { | |
| [0] = { | |
| .type = "max8649", | |
| .addr = 0x60, | |
| .platform_data = &jasper_max8649_info, | |
| }, | |
| [1] = { | |
| .type = "max8925", | |
| .addr = 0x3c, | |
| .irq = IRQ_MMP2_PMIC, | |
| .platform_data = &jasper_max8925_info, | |
| }, | |
| }; | |
| static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { | |
| .clk_delay_cycles = 0x1f, | |
| }; | |
| static void __init jasper_init(void) | |
| { | |
| mfp_config(ARRAY_AND_SIZE(jasper_pin_config)); | |
| /* on-chip devices */ | |
| mmp2_add_uart(1); | |
| mmp2_add_uart(3); | |
| mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); | |
| platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, | |
| sizeof(struct pxa_gpio_platform_data)); | |
| platform_device_register(&mmp2_device_gpio); | |
| mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ | |
| regulator_has_full_constraints(); | |
| } | |
| MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") | |
| .map_io = mmp_map_io, | |
| .nr_irqs = JASPER_NR_IRQS, | |
| .init_irq = mmp2_init_irq, | |
| .init_time = mmp2_timer_init, | |
| .init_machine = jasper_init, | |
| .restart = mmp_restart, | |
| MACHINE_END |