Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' into devel
diff --git a/MAINTAINERS b/MAINTAINERS
index 16129e6..6150c80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -771,6 +771,14 @@
M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
+ARM/NOMADIK ARCHITECTURE
+M: Alessandro Rubini <rubini@unipv.it>
+M: STEricsson <STEricsson_nomadik_linux@list.st.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-nomadik/
+F: arch/arm/plat-nomadik/
+
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
@@ -915,6 +923,12 @@
W: http://www.mcuos.com
S: Maintained
+ARM/U8500 ARM ARCHITECTURE
+M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-ux500/
+
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c..1ae18d8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,16 @@
help
Support for Broadcom's BCMRing platform.
+config ARCH_U8500
+ bool "ST-Ericsson U8500 Series"
+ select CPU_V7
+ select ARM_AMBA
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select COMMON_CLKDEV
+ help
+ Support for ST-Ericsson's Ux500 architecture
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -787,6 +797,7 @@
source "arch/arm/plat-mxc/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/mach-netx/Kconfig"
@@ -804,6 +815,8 @@
source "arch/arm/mach-bcmring/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -955,10 +968,10 @@
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1040,9 @@
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
- REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
default y
- select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf..7603eba 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -166,6 +166,7 @@
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_U300) := u300
+machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
@@ -176,6 +177,7 @@
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_PLAT_IOP) := iop
+plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac91..5a375e5 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -342,6 +342,22 @@
}
EXPORT_SYMBOL(dma_map_single);
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer. (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction dir)
+{
+ dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+ __func__, (void *) dma_addr, size, dir);
+
+ unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir)
{
@@ -366,8 +382,7 @@
* the safe buffer. (basically return things back to the way they
* should be)
*/
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +390,7 @@
unmap_single(dev, dma_addr, size, dir);
}
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 238b218..c97e102 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -120,6 +120,7 @@
# CONFIG_MACH_CARMEVA is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_ATEB9200 is not set
+CONFIG_MACH_ECO920=y
#
# AT91RM9200 Feature Selections
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
similarity index 100%
rename from arch/arm/configs/w90p910_defconfig
rename to arch/arm/configs/nuc910_defconfig
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 0000000..df1de9b
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 0000000..4b2cd9e
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 0000000..15fde22
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,680 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+
+#
+# ST-Ericsson platform type
+#
+
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3d0cdd2..9fd6d3a 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -331,15 +331,15 @@
* Convert calls to our calling convention.
*/
#define flush_cache_all() __cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_all();
}
static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +347,7 @@
}
static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +356,7 @@
}
static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *kaddr,
unsigned long len, int write)
{
@@ -365,6 +365,16 @@
__cpuc_coherent_kern_range(addr, addr + len);
}
}
+
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+ vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+ vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+ vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+ vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -410,8 +420,6 @@
*/
extern void flush_dcache_page(struct page *);
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
static inline void __flush_icache_all(void)
{
#ifdef CONFIG_ARM_ERRATA_411920
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa..a96300b 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
* must not be used by drivers.
*/
#ifndef __arch_page_to_dma
-
-#if !defined(CONFIG_HIGHMEM)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
-{
- return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
-}
-#elif defined(__pfn_to_bus)
static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
{
return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
}
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
+
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+ return pfn_to_page(__bus_to_pfn(addr));
+}
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
@@ -45,6 +40,11 @@
return __arch_page_to_dma(dev, page);
}
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+ return __arch_dma_to_page(dev, addr);
+}
+
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@
*/
extern dma_addr_t dma_map_single(struct device *, void *, size_t,
enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+ enum dma_data_direction);
extern dma_addr_t dma_map_page(struct device *, struct page *,
unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
enum dma_data_direction);
/*
@@ -352,7 +354,6 @@
{
/* nothing to do */
}
-#endif /* CONFIG_DMABOUNCE */
/**
* dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- dma_unmap_single(dev, handle, size, dir);
+ /* nothing to do */
}
+#endif /* CONFIG_DMABOUNCE */
/**
* dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf0..5421d82 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
+#ifndef __virt_to_phys
#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
/*
* Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
+
#ifndef __ASSEMBLY__
/*
@@ -194,7 +202,8 @@
#ifndef __virt_to_bus
#define __virt_to_bus __virt_to_phys
#define __bus_to_virt __phys_to_virt
-#define __pfn_to_bus(x) ((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x) __phys_to_pfn(x)
#endif
static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@
#endif /* !CONFIG_DISCONTIGMEM */
/*
- * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
* Optional coherency support. Currently used only by selected
* Intel XSC3-based systems.
*/
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa..1139768 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@
static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __pgprot_modify(prot,mask,bits) \
+ __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
/*
* Mark the prot value as uncacheable and unbufferable.
*/
#define pgprot_noncached(prot) \
- __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
#define pgprot_writecombine(prot) \
- __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f..9997ad2 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
# define __SWAB_64_THRU_32__
#endif
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+ __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+ return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+ __asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+ return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#else
+
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__u32 t;
@@ -48,3 +66,4 @@
#endif
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5..058e7e9 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb() dmb()
+#define rmb() dmb()
+#define wmb() dmb()
+#else
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+
+#ifndef CONFIG_SMP
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#else
-#define mb() dmb()
-#define rmb() dmb()
-#define wmb() dmb()
-#define smp_mb() dmb()
-#define smp_rmb() dmb()
-#define smp_wmb() dmb()
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
#endif
+
#define read_barrier_depends() do { } while(0)
#define smp_read_barrier_depends() do { } while(0)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2fd8843..c71e39e 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -163,6 +163,11 @@
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
+config MACH_ECO920
+ bool "eco920"
+ help
+ Select this if you are using the eco920 board
+
endif
# ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ada440a..709fbad 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -35,6 +35,7 @@
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
+obj-$(CONFIG_MACH_ECO920) += board-eco920.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -77,6 +78,7 @@
# Power Management
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784..a57af3e 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -131,6 +131,62 @@
/* --------------------------------------------------------------------
+ * USB Host HS (EHCI)
+ * Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+
+static struct resource usbh_ehci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_EHCI_BASE,
+ .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_ehci_device = {
+ .name = "atmel-ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ehci_data,
+ },
+ .resource = usbh_ehci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ehci_resources),
+};
+
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ehci_data = *data;
+ at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+ platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
new file mode 100644
index 0000000..295a966
--- /dev/null
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -0,0 +1,158 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include "generic.h"
+
+static void __init eco920_map_io(void)
+{
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+ /* DBGU on ttyS0. (Rx & Tx only */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init eco920_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eco920_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC2,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata eco920_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata eco920_udc_data = {
+ .vbus_pin = AT91_PIN_PB12,
+ .pullup_pin = AT91_PIN_PB13,
+};
+
+static struct at91_mmc_data __initdata eco920_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 0,
+};
+
+static struct physmap_flash_data eco920_flash_data = {
+ .width = 2,
+};
+
+static struct resource eco920_flash_resource = {
+ .start = 0x11000000,
+ .end = 0x11ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eco920_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &eco920_flash_data,
+ },
+ .resource = &eco920_flash_resource,
+ .num_resources = 1,
+};
+
+static struct resource at91_beeper_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_TC3,
+ .end = AT91RM9200_BASE_TC3 + 0x39,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91_beeper = {
+ .name = "at91_beeper",
+ .id = 0,
+ .resource = at91_beeper_resources,
+ .num_resources = ARRAY_SIZE(at91_beeper_resources),
+};
+
+static struct spi_board_info eco920_spi_devices[] = {
+ { /* CAN controller */
+ .modalias = "tlv5638",
+ .chip_select = 3,
+ .max_speed_hz = 20 * 1000 * 1000,
+ .mode = SPI_CPHA,
+ },
+};
+
+static void __init eco920_board_init(void)
+{
+ at91_add_device_serial();
+ at91_add_device_eth(&eco920_eth_data);
+ at91_add_device_usbh(&eco920_usbh_data);
+ at91_add_device_udc(&eco920_udc_data);
+
+ at91_add_device_mmc(0, &eco920_mmc_data);
+ platform_device_register(&eco920_flash);
+
+ at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
+ | AT91_SMC_RWSETUP_(1)
+ | AT91_SMC_DBW_8
+ | AT91_SMC_WSEN
+ | AT91_SMC_NWS_(15));
+
+ at91_set_A_periph(AT91_PIN_PC6, 1);
+
+ at91_set_gpio_input(AT91_PIN_PA23, 0);
+ at91_set_deglitch(AT91_PIN_PA23, 1);
+
+/* Initialization of the Static Memory Controller for Chip Select 3 */
+ at91_sys_write(AT91_SMC_CSR(3),
+ AT91_SMC_DBW_16 | /* 16 bit */
+ AT91_SMC_WSEN |
+ AT91_SMC_NWS_(5) | /* wait states */
+ AT91_SMC_TDF_(1) /* float time */
+ );
+
+ at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
+ at91_set_B_periph(AT91_PIN_PB6, 0);
+ platform_device_register(&at91_beeper);
+
+ at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+}
+
+MACHINE_START(ECO920, "eco920")
+ /* Maintainer: Sascha Hauer */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = eco920_map_io,
+ .init_irq = eco920_init_irq,
+ .init_machine = eco920_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843..1cf4d86 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -366,6 +366,7 @@
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
new file mode 100644
index 0000000..1cfeac1
--- /dev/null
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -0,0 +1,94 @@
+/*
+ * based on arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle support for AT91 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <linux/io.h>
+
+#include "pm.h"
+
+#define AT91_MAX_STATES 2
+
+static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
+
+static struct cpuidle_driver at91_idle_driver = {
+ .name = "at91_idle",
+ .owner = THIS_MODULE,
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int at91_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct timeval before, after;
+ int idle_time;
+ u32 saved_lpr;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+ if (state == &dev->states[0])
+ /* Wait for interrupt state */
+ cpu_do_idle();
+ else if (state == &dev->states[1]) {
+ asm("b 1f; .align 5; 1:");
+ asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
+ saved_lpr = sdram_selfrefresh_enable();
+ cpu_do_idle();
+ sdram_selfrefresh_disable(saved_lpr);
+ }
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+ return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int at91_init_cpuidle(void)
+{
+ struct cpuidle_device *device;
+
+ cpuidle_register_driver(&at91_idle_driver);
+
+ device = &per_cpu(at91_cpuidle_device, smp_processor_id());
+ device->state_count = AT91_MAX_STATES;
+
+ /* Wait for interrupt state */
+ device->states[0].enter = at91_enter_idle;
+ device->states[0].exit_latency = 1;
+ device->states[0].target_residency = 10000;
+ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[0].name, "WFI");
+ strcpy(device->states[0].desc, "Wait for interrupt");
+
+ /* Wait for interrupt and RAM self refresh state */
+ device->states[1].enter = at91_enter_idle;
+ device->states[1].exit_latency = 10;
+ device->states[1].target_residency = 10000;
+ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[1].name, "RAM_SR");
+ strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2f4fced..2295d80 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,7 @@
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724..6156689 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
#include <mach/cpu.h>
#include "generic.h"
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable() do {} while (0)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
- u32 lpr;
-
- saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-
- lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-
-#else
-#include <mach/at91sam9_sdramc.h>
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define AT91_SDRAMC AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
- u32 lpr;
-
- saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
- lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
- at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-
-#endif
-
+#include "pm.h"
/*
* Show the reason for the previous system reset.
@@ -260,6 +205,7 @@
static int at91_pm_enter(suspend_state_t state)
{
+ u32 saved_lpr;
at91_gpio_suspend();
at91_irq_suspend();
@@ -315,9 +261,9 @@
*/
asm("b 1f; .align 5; 1:");
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
- sdram_selfrefresh_enable();
+ saved_lpr = sdram_selfrefresh_enable();
asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
- sdram_selfrefresh_disable();
+ sdram_selfrefresh_disable(saved_lpr);
break;
case PM_SUSPEND_ON:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 0000000..08322c4
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,67 @@
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+ at91_sys_write(AT91_SDRAMC_LPR, 0);
+ at91_sys_write(AT91_SDRAMC_SRR, 1);
+ return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ u32 saved_lpr, lpr;
+
+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+ return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <mach/at91sam9_sdramc.h>
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ u32 saved_lpr, lpr;
+
+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+ return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff..dae5e9b 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
-
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
-/* happen in readw/writew etc. */
-
-#define readb(c) __raw_readb(c)
-#define readw(c) __raw_readw(c)
-#define readl(c) __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p, d, l) __raw_readsb(p, d, l)
-#define readsw(p, d, l) __raw_readsw(p, d, l)
-#define readsl(p, d, l) __raw_readsl(p, d, l)
-
-#define writeb(v, c) __raw_writeb(v, c)
-#define writew(v, c) __raw_writew(v, c)
-#define writel(v, c) __raw_writel(v, c)
-
-#define writesb(p, d, l) __raw_writesb(p, d, l)
-#define writesw(p, d, l) __raw_writesw(p, d, l)
-#define writesl(p, d, l) __raw_writesl(p, d, l)
-
-#define memset_io(c, v, l) _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l))
-
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b4357c3..1f0d665 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -728,6 +729,82 @@
platform_device_register(&ep93xx_fb_device);
}
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+ {
+ .start = EP93XX_KEY_MATRIX_PHYS_BASE,
+ .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_KEY,
+ .end = IRQ_EP93XX_KEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ep93xx_keypad_device = {
+ .name = "ep93xx-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
+ .resource = ep93xx_keypad_resource,
+};
+
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+ ep93xx_keypad_device.dev.platform_data = data;
+ platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_c;
+ err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_d;
+ }
+
+ /* Enable the keypad controller; GPIO ports C and D used for keypad */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK);
+
+ return 0;
+
+fail_gpio_d:
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+ for ( ; i >= 0; --i) {
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+ gpio_free(EP93XX_GPIO_LINE_D(i));
+ }
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+ gpio_free(EP93XX_GPIO_LINE_D(i));
+ }
+
+ /* Disable the keypad controller; GPIO ports C and D used for GPIO */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a8..50cb991 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
+
#ifndef __ASM_MACH_CLKDEV_H
#define __ASM_MACH_CLKDEV_H
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d..3a5961d 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
+
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937e..d55194a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
+#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7c..5a3ce02 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/hardware.h
*/
+
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c..594b77f 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/io.h
*/
+
#ifndef __ASM_MACH_IO_H
#define __ASM_MACH_IO_H
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 469fd96..c6dc14d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@
struct i2c_board_info;
struct platform_device;
struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
struct ep93xx_eth_data
{
@@ -39,6 +40,9 @@
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b..25b1da9 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@
(dma_addr_t)page_to_phys(page); \
})
+#define __arch_dma_to_page(dev, addr) phys_to_page(addr)
+
#endif /* CONFIG_ARCH_IOP13XX */
#endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308..ffa19aa 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@
__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
__dma; })
+#define __arch_dma_to_page(dev, x) \
+ ({ dma_addr_t __dma = x; \
+ if (!is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - KS8695_PCIMEM_PA; \
+ phys_to_page(__dma); \
+ })
+
#endif
#endif
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49..3c5e0f5 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
+ select HAS_MTU
endmenu
config NOMADIK_8815
bool
-
config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 4120409..36f67fb 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
# Object file lists.
-obj-y += clock.o timer.o gpio.o
+obj-y += clock.o gpio.o
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537..1163944 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+
+#include <plat/mtu.h>
+
#include <mach/setup.h>
#include <mach/nand.h>
#include <mach/fsmc.h>
#include "clock.h"
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
/* These adresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
@@ -239,6 +246,26 @@
/* will add more devices */
};
+static void __init nomadik_timer_init(void)
+{
+ u32 src_cr;
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+ /* Save global pointer to mtu, used by platform timer code */
+ mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+ nmdk_timer_init();
+}
+
+static struct sys_timer nomadik_timer = {
+ .init = nomadik_timer_init,
+};
+
static void __init nhk8815_platform_init(void)
{
int i;
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468c..b7897ed 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
extern void cpu8815_map_io(void);
extern void cpu8815_platform_init(void);
extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
#endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c0..fab46fe 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@
obj-$(CONFIG_SPI_PL022) += spi.o
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_I2C_STU300) += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f8..c73ed06 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
#include <mach/irqs.h>
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING 0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING 0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING 0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING 0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING 0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING 0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING 0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING 0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING 0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING 0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING 0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING 0xAC
+
+static struct regulator_consumer_supply supply_ldo_c[] = {
+ {
+ .dev_name = "ab3100-codec",
+ .supply = "vaudio", /* Powers the codec */
+ },
+};
+
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+ {
+ .dev = NULL,
+ .supply = "vana15", /* Powers the SoC (CPU etc) */
+ },
+};
+
+static struct regulator_consumer_supply supply_ldo_g[] = {
+ {
+ .dev_name = "mmci",
+ .supply = "vmmc", /* Powers MMC/SD card */
+ },
+};
+
+static struct regulator_consumer_supply supply_ldo_h[] = {
+ {
+ .dev_name = "xgam_pdi",
+ .supply = "vdisp", /* Powers camera, display etc */
+ },
+};
+
+static struct regulator_consumer_supply supply_ldo_k[] = {
+ {
+ .dev_name = "irda",
+ .supply = "vir", /* Power IrDA */
+ },
+};
+
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+ {
+ .dev = NULL,
+ .supply = "vext", /* External power */
+ },
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static struct ab3100_platform_data ab3100_plf_data = {
+ .reg_constraints = {
+ /* LDO A routing and constraints */
+ {
+ .constraints = {
+ .name = "vrad",
+ .min_uV = LDO_A_VOLTAGE,
+ .max_uV = LDO_A_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ /* LDO C routing and constraints */
+ {
+ .constraints = {
+ .min_uV = LDO_C_VOLTAGE,
+ .max_uV = LDO_C_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+ .consumer_supplies = supply_ldo_c,
+ },
+ /* LDO D routing and constraints */
+ {
+ .constraints = {
+ .min_uV = LDO_D_VOLTAGE,
+ .max_uV = LDO_D_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ /*
+ * Actually this is boot_on but we need
+ * to reference count it externally to
+ * be able to shut down the system.
+ */
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+ .consumer_supplies = supply_ldo_d,
+ },
+ /* LDO E routing and constraints */
+ {
+ .constraints = {
+ .name = "vio",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ /* LDO F routing and constraints */
+ {
+ .constraints = {
+ .name = "vana25",
+ .min_uV = 2500000,
+ .max_uV = 2500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ /* LDO G routing and constraints */
+ {
+ .constraints = {
+ .min_uV = 1500000,
+ .max_uV = 2850000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+ .consumer_supplies = supply_ldo_g,
+ },
+ /* LDO H routing and constraints */
+ {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 2750000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+ .consumer_supplies = supply_ldo_h,
+ },
+ /* LDO K routing and constraints */
+ {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 2750000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+ .consumer_supplies = supply_ldo_k,
+ },
+ /* External regulator interface. No fixed voltage specified.
+ * If we knew the voltage of the external regulator and it
+ * was connected on the board, we could add the (fixed)
+ * voltage for it here.
+ */
+ {
+ .constraints = {
+ .min_uV = 0,
+ .max_uV = 0,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+ .consumer_supplies = supply_ldo_ext,
+ },
+ /* Buck converter routing and constraints */
+ {
+ .constraints = {
+ .name = "vcore",
+ .min_uV = 1200000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ },
+ .reg_initvals = {
+ LDO_A_SETTING,
+ LDO_C_SETTING,
+ LDO_E_SETTING,
+ LDO_E_SLEEP_SETTING,
+ LDO_F_SETTING,
+ LDO_G_SETTING,
+ LDO_H_SETTING,
+ LDO_K_SETTING,
+ LDO_EXT_SETTING,
+ BUCK_SETTING,
+ BUCK_SLEEP_SETTING,
+ LDO_D_SETTING,
+ },
+};
+
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
{
.type = "ab3100",
.addr = 0x48,
.irq = IRQ_U300_IRQ0_EXT,
+ .platform_data = &ab3100_plf_data,
},
};
@@ -38,6 +282,11 @@
{
i2c_register_board_info(0, bus0_i2c_board_info,
ARRAY_SIZE(bus0_i2c_board_info));
+ /*
+ * This makes the core shut down all unused regulators
+ * after all the initcalls have completed.
+ */
+ regulator_has_full_constraints();
i2c_register_board_info(1, bus1_i2c_board_info,
ARRAY_SIZE(bus1_i2c_board_info));
}
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016..109f5a6 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@
return mmci_card->mmc_inserted;
}
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
- int v;
-
- /*
- * MMC Spec:
- * bit 7: 1.70 - 1.95V
- * bit 8 - 14: 2.0 - 2.6V
- * bit 15 - 23: 2.7 - 3.6V
- *
- * ab3100 voltages:
- * 000 - 2.85V
- * 001 - 2.75V
- * 010 - 1.8V
- * 011 - 1.5V
- */
- switch (voltage) {
- case 8:
- v = 3;
- break;
- case 9:
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- v = 1;
- break;
- case 16:
- v = 1;
- break;
- case 17:
- case 18:
- case 19:
- case 20:
- case 21:
- case 22:
- case 23:
- case 24:
- v = 0;
- break;
- default:
- v = 0;
- break;
- }
-
- /* PL180 voltage register bits */
- return v << 2;
-}
-
-
-
static int mmci_callback(void *data)
{
struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@
if (!mmci_card)
return -ENOMEM;
+ /*
+ * Do not set ocr_mask or voltage translation function,
+ * we have a regulator we can control instead.
+ */
/* Nominally 2.85V on our platform */
- mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
- mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 0000000..9c53f01
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+ sigset_t old, all;
+
+ sigfillset(&all);
+ if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+ /* Disable LDO D to shut down the system */
+ if (main_power_15)
+ regulator_disable(main_power_15);
+ else
+ pr_err("regulator not available to shut down system\n");
+ (void) sigprocmask(SIG_SETMASK, &old, NULL);
+ }
+ return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+ int err;
+ u32 val;
+
+ pr_info("U300: setting up board power\n");
+ main_power_15 = regulator_get(NULL, "vana15");
+ if (IS_ERR(main_power_15)) {
+ pr_err("could not get vana15");
+ return PTR_ERR(main_power_15);
+ }
+ err = regulator_enable(main_power_15);
+ if (err) {
+ pr_err("could not enable vana15\n");
+ return err;
+ }
+
+ /*
+ * On U300 a special system controller register pulls up the DC
+ * until the vana15 (LDO D) regulator comes up. At this point, all
+ * regulators are set and we do not need power control via
+ * DC ON anymore. This function will likely be moved whenever
+ * the rest of the U300 power management is implemented.
+ */
+ pr_info("U300: disable system controller pull-up\n");
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+ val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+ /* Register globally exported PM poweroff hook */
+ pm_power_off = u300_pm_poweroff;
+
+ return 0;
+}
+
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 0000000..03625d7
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+ depends on ARCH_U8500
+
+comment "ST-Ericsson Multicore Mobile Platforms"
+
+config MACH_U8500_MOP
+ bool "U8500 Early Development platform"
+ default y
+ select ARM_GIC
+ select HAS_MTU
+ help
+ Include support for mop500 development platform
+ based on U8500 architecture. The platform is based
+ on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 0000000..95e6e24
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+
+obj-y := clock.o
+obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 0000000..c7e75ac
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 0000000..aa5afbc
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/mtu.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+ .dev = { .init_name = "uart0" },
+ __MEM_4K_RESOURCE(U8500_UART0_BASE),
+ .irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+ .dev = { .init_name = "uart1" },
+ __MEM_4K_RESOURCE(U8500_UART1_BASE),
+ .irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device uart2_device = {
+ .dev = { .init_name = "uart2" },
+ __MEM_4K_RESOURCE(U8500_UART2_BASE),
+ .irq = {IRQ_UART2, NO_IRQ},
+};
+
+static void ab4500_spi_cs_control(u32 command)
+{
+ /* set the FRM signal, which is CS - TODO */
+}
+
+struct pl022_config_chip ab4500_chip_info = {
+ .lbm = LOOPBACK_DISABLED,
+ .com_mode = INTERRUPT_TRANSFER,
+ .iface = SSP_INTERFACE_MOTOROLA_SPI,
+ /* we can act as master only */
+ .hierarchy = SSP_MASTER,
+ .slave_tx_disable = 0,
+ .endian_rx = SSP_RX_MSB,
+ .endian_tx = SSP_TX_MSB,
+ .data_size = SSP_DATA_BITS_24,
+ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .clk_phase = SSP_CLK_SECOND_EDGE,
+ .clk_pol = SSP_CLK_POL_IDLE_HIGH,
+ .cs_control = ab4500_spi_cs_control,
+};
+
+static struct spi_board_info u8500_spi_devices[] = {
+ {
+ .modalias = "ab4500",
+ .controller_data = &ab4500_chip_info,
+ .max_speed_hz = 12000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .irq = IRQ_AB4500,
+ },
+};
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+ .bus_id = 0,
+ /* pl022 not yet supports dma */
+ .enable_dma = 0,
+ /* on this platform, gpio 31,142,144,214 &
+ * 224 are connected as chip selects
+ */
+ .num_chipselect = 5,
+};
+
+static struct amba_device pl022_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "pl022",
+ .platform_data = &ssp0_platform_data,
+ },
+ .res = {
+ .start = U8500_SSP0_BASE,
+ .end = U8500_SSP0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_SSP0, NO_IRQ },
+ /* ST-Ericsson modified id */
+ .periphid = SSP_PER_ID,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uart0_device,
+ &uart1_device,
+ &uart2_device,
+ &pl022_device,
+};
+
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+ /* Setup the local timer base */
+ twd_base = __io_address(U8500_TWD_BASE);
+#endif
+ /* Setup the MTU base */
+ mtu_base = __io_address(U8500_MTU0_BASE);
+
+ nmdk_timer_init();
+}
+
+static struct sys_timer u8500_timer = {
+ .init = u8500_timer_init,
+};
+
+static void __init u8500_init_machine(void)
+{
+ int i;
+
+ /* Register the active AMBA devices on this board */
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+ amba_device_register(amba_devs[i], &iomem_resource);
+
+ spi_register_board_info(u8500_spi_devices,
+ ARRAY_SIZE(u8500_spi_devices));
+
+ u8500_init_devices();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+ /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+ .phys_io = U8500_UART2_BASE,
+ .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = u8500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &u8500_timer,
+ .init_machine = u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 0000000..20b6ebb
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ * heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+ unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /*TODO*/
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* ssp clock */
+static struct clk ssp_clk = {
+ .rate = 48000000,
+};
+
+/* fixed clock */
+static struct clk f38_clk = {
+ .rate = 38400000,
+};
+
+static struct clk_lookup lookups[] = {
+ {
+ /* UART0 */
+ .dev_id = "uart0",
+ .clk = &f38_clk,
+ }, { /* UART1 */
+ .dev_id = "uart1",
+ .clk = &f38_clk,
+ }, { /* UART2 */
+ .dev_id = "uart2",
+ .clk = &f38_clk,
+ }, { /* SSP */
+ .dev_id = "pl022",
+ .clk = &ssp_clk,
+ }
+};
+
+static int __init clk_init(void)
+{
+ int i;
+
+ /* register the clock lookups */
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 0000000..5f05e58
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ /* yet to be added, add i2c0, gpio.. */
+};
+
+#define __IO_DEV_DESC(x, sz) { \
+ .virtual = IO_ADDRESS(x), \
+ .pfn = __phys_to_pfn(x), \
+ .length = sz, \
+ .type = MT_DEVICE, \
+}
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+void __init u8500_map_io(void)
+{
+ iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+
+void __init u8500_init_irq(void)
+{
+ gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+ /* Register the platform devices */
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+ return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 0000000..a6be2cd
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson
+ * This file is based ARM Realview platform
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+ dsb
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 0000000..8f21b6a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @MMU enabled?
+ moveq \rx, #0x80000000 @MMU off, Physical address
+ movne \rx, #0xF0000000 @MMU on, Virtual address
+ orr \rx, \rx, #0x7000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 0000000..eece330
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ * -just satisfied checkpatch script.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt. We then just
+ * need to check whether it is in the valid range for an
+ * IRQ (30-1020 inclusive).
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ /* bits 12-10 = src CPU, 9-0 = int # */
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ
+ * acknowledge register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of
+ * interrupt on the controller, since this requires the
+ * original irqstat value which we won't easily be able
+ * to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base
+ * are preserved..
+ */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 0000000..6da6502
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL 0xf0000000
+#define U8500_IO_PHYSICAL 0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x) \
+ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n) __io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE 0x80000000
+#define U8500_PER2_BASE 0x80110000
+#define U8500_PER1_BASE 0x80120000
+#define U8500_PER4_BASE 0x80150000
+
+#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER5_BASE 0xa03e0000
+#define U8500_PER7_BASE 0xa03d0000
+
+#define U8500_SVA_BASE 0xa0100000
+#define U8500_SIA_BASE 0xa0200000
+
+#define U8500_SGA_BASE 0xa0300000
+#define U8500_MCDE_BASE 0xa0350000
+#define U8500_DMA_BASE 0xa0362000
+
+#define U8500_SCU_BASE 0xa0410000
+#define U8500_GIC_CPU_BASE 0xa0410100
+#define U8500_TWD_BASE 0xa0410600
+#define U8500_GIC_DIST_BASE 0xa0411000
+#define U8500_L2CC_BASE 0xa0412000
+
+#define U8500_TWD_SIZE 0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID 0x01080022
+
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 0000000..1cf3f44
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 0000000..394b5dd
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER 29
+#define IRQ_LOCALWDOG 30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START 32
+
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_SSP0 (IRQ_SHPI_START + 14)
+#define IRQ_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT (IRQ_SHPI_START + 18)
+#define IRQ_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DMA (IRQ_SHPI_START + 25)
+#define IRQ_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29)
+#define IRQ_MSP0 (IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
+#define IRQ_AB4500 (IRQ_SHPI_START + 40)
+#define IRQ_DISP (IRQ_SHPI_START + 48)
+#define IRQ_SiPI3 (IRQ_SHPI_START + 49)
+#define IRQ_SSP1 (IRQ_SHPI_START + 52)
+#define IRQ_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_MSP1 (IRQ_SHPI_START + 62)
+#define IRQ_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4 (IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0 (IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1 (IRQ_SHPI_START + 105)
+#define IRQ_HSITD0 (IRQ_SHPI_START + 106)
+#define IRQ_HSITD1 (IRQ_SHPI_START + 107)
+#define IRQ_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_GPIO7 (IRQ_SHPI_START + 126)
+#define IRQ_GPIO8 (IRQ_SHPI_START + 127)
+
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS 161
+
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 0000000..510571a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+#define BUS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 0000000..cf0ce16
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+
+#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 0000000..b59f7bc
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x0F; \
+ })
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 0000000..c0cd800
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /* yet to be implemented - TODO */
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 0000000..d0942c1
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 110000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 0000000..8552eb1
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define U8500_UART_DR 0x80007000
+#define U8500_UART_LCRH 0x8000702c
+#define U8500_UART_CR 0x80007030
+#define U8500_UART_FR 0x80007018
+
+static void putc(const char c)
+{
+ /* Do nothing if the UART is not enabled. */
+ if (!(readb(U8500_UART_CR) & 0x1))
+ return;
+
+ if (c == '\n')
+ putc('\r');
+
+ while (readb(U8500_UART_FR) & (1 << 5))
+ barrier();
+ writeb(c, U8500_UART_DR);
+}
+
+static void flush(void)
+{
+ if (!(readb(U8500_UART_CR) & 0x1))
+ return;
+ while (readb(U8500_UART_FR) & (1 << 3))
+ barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 0000000..86cdbbc
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END 0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 0000000..2288f6a
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 0000000..8dfe7ca
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+ return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ */
+ pen_release = cpu;
+ flush_cache_all();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ if (pen_release == -1)
+ break;
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ /* nobody is to be released from the pen yet */
+ pen_release = -1;
+
+ /*
+ * write the address of secondary startup into the backup ram register
+ * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+ * backup ram register at offset 0x1FF0, which is what boot rom code
+ * is waiting for. This would wake up the secondary core from WFE
+ */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+ __raw_writel(virt_to_phys(u8500_secondary_startup),
+ (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+ U8500_CPU1_JUMPADDR_OFFSET);
+
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+ __raw_writel(0xA1FEED01,
+ (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+ U8500_CPU1_WAKEMAGIC_OFFSET);
+
+ /* make sure write buffer is drained */
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "U8500: strange CM count of 0? Default to 1\n");
+ ncores = 1;
+ }
+
+ if (ncores > num_possible_cpus()) {
+ printk(KERN_WARNING
+ "U8500: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, num_possible_cpus());
+ ncores = num_possible_cpus();
+ }
+
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+ scu_enable(__io_address(U8500_SCU_BASE));
+ wakeup_secondary();
+ }
+}
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98d..51f17b7 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
#include <mach/map.h>
#include "cpu.h"
@@ -196,6 +197,18 @@
/* SPI device */
+static struct w90p910_spi_info nuc900_spiflash_data = {
+ .num_cs = 1,
+ .lsb = 0,
+ .txneg = 1,
+ .rxneg = 0,
+ .divider = 24,
+ .sleep = 0,
+ .txnum = 0,
+ .txbitlen = 1,
+ .bus_num = 0,
+};
+
static struct resource nuc900_spi_resource[] = {
[0] = {
.start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_spi_resource),
.resource = nuc900_spi_resource,
+ .dev = {
+ .platform_data = &nuc900_spiflash_data,
+ }
};
/* spi device, spi flash info */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d81..7b7d4c3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -774,5 +774,5 @@
config ARM_L1_CACHE_SHIFT
int
- default 6 if ARCH_OMAP3
+ default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa..42352e7 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
- pgd.o mmu.o
+ pgd.o mmu.o vmregion.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d..747f9a9 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -99,18 +99,25 @@
l2x0_base = base;
- /* disable L2X0 */
- writel(0, l2x0_base + L2X0_CTRL);
+ /*
+ * Check if l2x0 controller is already enabled.
+ * If you are booting from non-secure mode
+ * accessing the below registers will fault.
+ */
+ if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
- aux = readl(l2x0_base + L2X0_AUX_CTRL);
- aux &= aux_mask;
- aux |= aux_val;
- writel(aux, l2x0_base + L2X0_AUX_CTRL);
+ /* l2x0 controller is disabled */
- l2x0_inv_all();
+ aux = readl(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+ writel(aux, l2x0_base + L2X0_AUX_CTRL);
- /* enable L2X0 */
- writel(1, l2x0_base + L2X0_CTRL);
+ l2x0_inv_all();
+
+ /* enable L2X0 */
+ writel(1, l2x0_base + L2X0_CTRL);
+ }
outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7b..841f355 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@
kfrom = kmap_atomic(from, KM_USER0);
kto = kmap_atomic(to, KM_USER1);
copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+ /*
+ * kmap_atomic() doesn't set the page virtual address, and
+ * kunmap_atomic() takes care of cache flushing already.
+ */
+ if (page_address(to) != NULL)
+#endif
+ __cpuc_flush_dcache_page(kto);
kunmap_atomic(kto, KM_USER1);
kunmap_atomic(kfrom, KM_USER0);
}
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b9590a7..26325cb 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,435 +63,86 @@
return mask;
}
-#ifdef CONFIG_MMU
/*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask. Note that 'size' must be page aligned.
*/
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
-static DEFINE_SPINLOCK(consistent_lock);
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- * struct vm_struct {
- * struct vm_region region;
- * unsigned long flags;
- * struct page **pages;
- * unsigned int nr_pages;
- * unsigned long phys_addr;
- * };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- * struct vm_region vmalloc_head = {
- * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
- * .vm_start = VMALLOC_START,
- * .vm_end = VMALLOC_END,
- * };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.) I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
- struct list_head vm_list;
- unsigned long vm_start;
- unsigned long vm_end;
- struct page *vm_pages;
- int vm_active;
-};
-
-static struct arm_vm_region consistent_head = {
- .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
- .vm_end = CONSISTENT_END,
-};
-
-static struct arm_vm_region *
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
{
- unsigned long addr = head->vm_start, end = head->vm_end - size;
- unsigned long flags;
- struct arm_vm_region *c, *new;
-
- new = kmalloc(sizeof(struct arm_vm_region), gfp);
- if (!new)
- goto out;
-
- spin_lock_irqsave(&consistent_lock, flags);
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if ((addr + size) < addr)
- goto nospc;
- if ((addr + size) <= c->vm_start)
- goto found;
- addr = c->vm_end;
- if (addr > end)
- goto nospc;
- }
-
- found:
- /*
- * Insert this entry _before_ the one we found.
- */
- list_add_tail(&new->vm_list, &c->vm_list);
- new->vm_start = addr;
- new->vm_end = addr + size;
- new->vm_active = 1;
-
- spin_unlock_irqrestore(&consistent_lock, flags);
- return new;
-
- nospc:
- spin_unlock_irqrestore(&consistent_lock, flags);
- kfree(new);
- out:
- return NULL;
-}
-
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
-{
- struct arm_vm_region *c;
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if (c->vm_active && c->vm_start == addr)
- goto out;
- }
- c = NULL;
- out:
- return c;
-}
-
-#ifdef CONFIG_HUGETLB_PAGE
-#error ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
-
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- pgprot_t prot)
-{
- struct page *page;
- struct arm_vm_region *c;
- unsigned long order;
+ unsigned long order = get_order(size);
+ struct page *page, *p, *e;
+ void *ptr;
u64 mask = get_coherent_dma_mask(dev);
- u64 limit;
- if (!consistent_pte[0]) {
- printk(KERN_ERR "%s: not initialised\n", __func__);
- dump_stack();
+#ifdef CONFIG_DMA_API_DEBUG
+ u64 limit = (mask + 1) & ~mask;
+ if (limit && size >= limit) {
+ dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
+ size, mask);
return NULL;
}
+#endif
if (!mask)
- goto no_page;
-
- /*
- * Sanity check the allocation size.
- */
- size = PAGE_ALIGN(size);
- limit = (mask + 1) & ~mask;
- if ((limit && size >= limit) ||
- size >= (CONSISTENT_END - CONSISTENT_BASE)) {
- printk(KERN_WARNING "coherent allocation too big "
- "(requested %#x mask %#llx)\n", size, mask);
- goto no_page;
- }
-
- order = get_order(size);
+ return NULL;
if (mask < 0xffffffffULL)
gfp |= GFP_DMA;
page = alloc_pages(gfp, order);
if (!page)
- goto no_page;
+ return NULL;
/*
- * Invalidate any data that might be lurking in the
- * kernel direct-mapped region for device DMA.
+ * Now split the huge page and free the excess pages
*/
- {
- void *ptr = page_address(page);
- memset(ptr, 0, size);
- dmac_flush_range(ptr, ptr + size);
- outer_flush_range(__pa(ptr), __pa(ptr) + size);
- }
+ split_page(page, order);
+ for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
+ __free_page(p);
/*
- * Allocate a virtual address in the consistent mapping region.
+ * Ensure that the allocated pages are zeroed, and that any data
+ * lurking in the kernel direct-mapped region is invalidated.
*/
- c = arm_vm_region_alloc(&consistent_head, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
- if (c) {
- pte_t *pte;
- struct page *end = page + (1 << order);
- int idx = CONSISTENT_PTE_INDEX(c->vm_start);
- u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+ ptr = page_address(page);
+ memset(ptr, 0, size);
+ dmac_flush_range(ptr, ptr + size);
+ outer_flush_range(__pa(ptr), __pa(ptr) + size);
- pte = consistent_pte[idx] + off;
- c->vm_pages = page;
-
- split_page(page, order);
-
- /*
- * Set the "dma handle"
- */
- *handle = page_to_dma(dev, page);
-
- do {
- BUG_ON(!pte_none(*pte));
-
- /*
- * x86 does not mark the pages reserved...
- */
- SetPageReserved(page);
- set_pte_ext(pte, mk_pte(page, prot), 0);
- page++;
- pte++;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- pte = consistent_pte[++idx];
- }
- } while (size -= PAGE_SIZE);
-
- /*
- * Free the otherwise unused pages.
- */
- while (page < end) {
- __free_page(page);
- page++;
- }
-
- return (void *)c->vm_start;
- }
-
- if (page)
- __free_pages(page, order);
- no_page:
- *handle = ~0;
- return NULL;
+ return page;
}
-#else /* !CONFIG_MMU */
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- pgprot_t prot)
-{
- void *virt;
- u64 mask = get_coherent_dma_mask(dev);
-
- if (!mask)
- goto error;
-
- if (mask < 0xffffffffULL)
- gfp |= GFP_DMA;
- virt = kmalloc(size, gfp);
- if (!virt)
- goto error;
-
- *handle = virt_to_dma(dev, virt);
- return virt;
-
-error:
- *handle = ~0;
- return NULL;
-}
-#endif /* CONFIG_MMU */
/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
+ * Free a DMA buffer. 'size' must be page aligned.
*/
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+static void __dma_free_buffer(struct page *page, size_t size)
{
- void *memory;
+ struct page *e = page + (size >> PAGE_SHIFT);
- if (dma_alloc_from_coherent(dev, size, handle, &memory))
- return memory;
-
- if (arch_is_coherent()) {
- void *virt;
-
- virt = kmalloc(size, gfp);
- if (!virt)
- return NULL;
- *handle = virt_to_dma(dev, virt);
-
- return virt;
+ while (page < e) {
+ __free_page(page);
+ page++;
}
-
- return __dma_alloc(dev, size, handle, gfp,
- pgprot_noncached(pgprot_kernel));
}
-EXPORT_SYMBOL(dma_alloc_coherent);
-/*
- * Allocate a writecombining region, in much the same way as
- * dma_alloc_coherent above.
- */
-void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
- return __dma_alloc(dev, size, handle, gfp,
- pgprot_writecombine(pgprot_kernel));
-}
-EXPORT_SYMBOL(dma_alloc_writecombine);
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- int ret = -ENXIO;
#ifdef CONFIG_MMU
- unsigned long flags, user_size, kern_size;
- struct arm_vm_region *c;
-
- user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-
- spin_lock_irqsave(&consistent_lock, flags);
- c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- if (c) {
- unsigned long off = vma->vm_pgoff;
-
- kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
-
- if (off < kern_size &&
- user_size <= (kern_size - off)) {
- ret = remap_pfn_range(vma, vma->vm_start,
- page_to_pfn(c->vm_pages) + off,
- user_size << PAGE_SHIFT,
- vma->vm_page_prot);
- }
- }
-#endif /* CONFIG_MMU */
-
- return ret;
-}
-
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
- return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
/*
- * free a page as defined by the above mapping.
- * Must not be called with IRQs disabled.
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-#ifdef CONFIG_MMU
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
- struct arm_vm_region *c;
- unsigned long flags, addr;
- pte_t *ptep;
- int idx;
- u32 off;
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
- WARN_ON(irqs_disabled());
+#include "vmregion.h"
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
- return;
+static struct arm_vmregion_head consistent_head = {
+ .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
- if (arch_is_coherent()) {
- kfree(cpu_addr);
- return;
- }
-
- size = PAGE_ALIGN(size);
-
- spin_lock_irqsave(&consistent_lock, flags);
- c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
- if (!c)
- goto no_area;
-
- c->vm_active = 0;
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- if ((c->vm_end - c->vm_start) != size) {
- printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
- }
-
- idx = CONSISTENT_PTE_INDEX(c->vm_start);
- off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
- ptep = consistent_pte[idx] + off;
- addr = c->vm_start;
- do {
- pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
- unsigned long pfn;
-
- ptep++;
- addr += PAGE_SIZE;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- ptep = consistent_pte[++idx];
- }
-
- if (!pte_none(pte) && pte_present(pte)) {
- pfn = pte_pfn(pte);
-
- if (pfn_valid(pfn)) {
- struct page *page = pfn_to_page(pfn);
-
- /*
- * x86 does not mark the pages reserved...
- */
- ClearPageReserved(page);
-
- __free_page(page);
- continue;
- }
- }
-
- printk(KERN_CRIT "%s: bad page in kernel page table\n",
- __func__);
- } while (size -= PAGE_SIZE);
-
- flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
- spin_lock_irqsave(&consistent_lock, flags);
- list_del(&c->vm_list);
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- kfree(c);
- return;
-
- no_area:
- spin_unlock_irqrestore(&consistent_lock, flags);
- printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
- __func__, cpu_addr);
- dump_stack();
-}
-#else /* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
- return;
- kfree(cpu_addr);
-}
-#endif /* CONFIG_MMU */
-EXPORT_SYMBOL(dma_free_coherent);
+#ifdef CONFIG_HUGETLB_PAGE
+#error ARM Coherent DMA allocator does not (yet) support huge TLB
+#endif
/*
* Initialise the consistent memory allocation.
@@ -499,7 +150,6 @@
static int __init consistent_init(void)
{
int ret = 0;
-#ifdef CONFIG_MMU
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
@@ -526,13 +176,228 @@
consistent_pte[i++] = pte;
base += (1 << PGDIR_SHIFT);
} while (base < CONSISTENT_END);
-#endif /* !CONFIG_MMU */
return ret;
}
core_initcall(consistent_init);
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
+{
+ struct arm_vmregion *c;
+
+ if (!consistent_pte[0]) {
+ printk(KERN_ERR "%s: not initialised\n", __func__);
+ dump_stack();
+ return NULL;
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = arm_vmregion_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ pte_t *pte;
+ int idx = CONSISTENT_PTE_INDEX(c->vm_start);
+ u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+
+ pte = consistent_pte[idx] + off;
+ c->vm_pages = page;
+
+ do {
+ BUG_ON(!pte_none(*pte));
+
+ set_pte_ext(pte, mk_pte(page, prot), 0);
+ page++;
+ pte++;
+ off++;
+ if (off >= PTRS_PER_PTE) {
+ off = 0;
+ pte = consistent_pte[++idx];
+ }
+ } while (size -= PAGE_SIZE);
+
+ return (void *)c->vm_start;
+ }
+ return NULL;
+}
+
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+ struct arm_vmregion *c;
+ unsigned long addr;
+ pte_t *ptep;
+ int idx;
+ u32 off;
+
+ c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+ if (!c) {
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, cpu_addr);
+ dump_stack();
+ return;
+ }
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ idx = CONSISTENT_PTE_INDEX(c->vm_start);
+ off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+ ptep = consistent_pte[idx] + off;
+ addr = c->vm_start;
+ do {
+ pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+
+ ptep++;
+ addr += PAGE_SIZE;
+ off++;
+ if (off >= PTRS_PER_PTE) {
+ off = 0;
+ ptep = consistent_pte[++idx];
+ }
+
+ if (pte_none(pte) || !pte_present(pte))
+ printk(KERN_CRIT "%s: bad page in kernel page table\n",
+ __func__);
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ arm_vmregion_free(&consistent_head, c);
+}
+
+#else /* !CONFIG_MMU */
+
+#define __dma_alloc_remap(page, size, gfp, prot) page_address(page)
+#define __dma_free_remap(addr, size) do { } while (0)
+
+#endif /* CONFIG_MMU */
+
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+ pgprot_t prot)
+{
+ struct page *page;
+ void *addr;
+
+ *handle = ~0;
+ size = PAGE_ALIGN(size);
+
+ page = __dma_alloc_buffer(dev, size, gfp);
+ if (!page)
+ return NULL;
+
+ if (!arch_is_coherent())
+ addr = __dma_alloc_remap(page, size, gfp, prot);
+ else
+ addr = page_address(page);
+
+ if (addr)
+ *handle = page_to_dma(dev, page);
+
+ return addr;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ void *memory;
+
+ if (dma_alloc_from_coherent(dev, size, handle, &memory))
+ return memory;
+
+ return __dma_alloc(dev, size, handle, gfp,
+ pgprot_dmacoherent(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Allocate a writecombining region, in much the same way as
+ * dma_alloc_coherent above.
+ */
+void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ return __dma_alloc(dev, size, handle, gfp,
+ pgprot_writecombine(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_writecombine);
+
+static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ int ret = -ENXIO;
+#ifdef CONFIG_MMU
+ unsigned long user_size, kern_size;
+ struct arm_vmregion *c;
+
+ user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+
+ c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
+ if (c) {
+ unsigned long off = vma->vm_pgoff;
+
+ kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
+
+ if (off < kern_size &&
+ user_size <= (kern_size - off)) {
+ ret = remap_pfn_range(vma, vma->vm_start,
+ page_to_pfn(c->vm_pages) + off,
+ user_size << PAGE_SHIFT,
+ vma->vm_page_prot);
+ }
+ }
+#endif /* CONFIG_MMU */
+
+ return ret;
+}
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
+ return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_coherent);
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+ return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_writecombine);
+
+/*
+ * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
+ */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+ WARN_ON(irqs_disabled());
+
+ if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ return;
+
+ size = PAGE_ALIGN(size);
+
+ if (!arch_is_coherent())
+ __dma_free_remap(cpu_addr, size);
+
+ __dma_free_buffer(dma_to_page(dev, handle), size);
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
/*
* Make an area consistent for devices.
* Note: Drivers should NOT use this function directly, as it will break
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6..7296022 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include "mm.h"
+
static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
/*
@@ -151,7 +153,14 @@
if (!pfn_valid(pfn))
return;
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
page = pfn_to_page(pfn);
+ if (page == ZERO_PAGE(0))
+ return;
+
mapping = page_mapping(page);
#ifndef CONFIG_SMP
if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7f294f3..329594e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -35,14 +35,12 @@
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
- __flush_icache_all();
}
void flush_cache_mm(struct mm_struct *mm)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
- __cpuc_flush_user_all();
+ vivt_flush_cache_mm(mm);
return;
}
@@ -52,16 +50,13 @@
:
: "r" (0)
: "cc");
- __flush_icache_all();
}
}
void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
- __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
- vma->vm_flags);
+ vivt_flush_cache_range(vma, start, end);
return;
}
@@ -71,22 +66,26 @@
:
: "r" (0)
: "cc");
- __flush_icache_all();
}
+
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache_all();
}
void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = user_addr & PAGE_MASK;
- __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
- }
+ vivt_flush_cache_page(vma, user_addr, pfn);
return;
}
- if (cache_is_vipt_aliasing())
+ if (cache_is_vipt_aliasing()) {
flush_pfn_alias(pfn, user_addr);
+ __flush_icache_all();
+ }
+
+ if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+ __flush_icache_all();
}
void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -94,15 +93,13 @@
unsigned long len, int write)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = (unsigned long)kaddr;
- __cpuc_coherent_kern_range(addr, addr + len);
- }
+ vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
return;
}
if (cache_is_vipt_aliasing()) {
flush_pfn_alias(page_to_pfn(page), uaddr);
+ __flush_icache_all();
return;
}
@@ -120,6 +117,8 @@
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
+ void *addr = page_address(page);
+
/*
* Writeback any data associated with the kernel mapping of this
* page. This ensures that data in the physical page is mutually
@@ -130,9 +129,9 @@
* kmap_atomic() doesn't set the page virtual address, and
* kunmap_atomic() takes care of cache flushing already.
*/
- if (page_address(page))
+ if (addr)
#endif
- __cpuc_flush_dcache_page(page_address(page));
+ __cpuc_flush_dcache_page(addr);
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
@@ -196,7 +195,16 @@
*/
void flush_dcache_page(struct page *page)
{
- struct address_space *mapping = page_mapping(page);
+ struct address_space *mapping;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
+ if (page == ZERO_PAGE(0))
+ return;
+
+ mapping = page_mapping(page);
#ifndef CONFIG_SMP
if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -242,6 +250,7 @@
* userspace address only.
*/
flush_pfn_alias(pfn, vmaddr);
+ __flush_icache_all();
}
/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05..a888363 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@
const struct mem_type *get_mem_type(unsigned int type);
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
#endif
struct map_desc;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0..2427cdc 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1036,7 +1036,7 @@
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
- flush_dcache_page(empty_zero_page);
+ __flush_dcache_page(NULL, empty_zero_page);
}
/*
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 0000000..19e09bdb
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include "vmregion.h"
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vmregion region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ * struct vmregion vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct arm_vmregion *c, *new;
+
+ if (head->vm_end - head->vm_start < size) {
+ printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+ __func__, size);
+ goto out;
+ }
+
+ new = kmalloc(sizeof(struct arm_vmregion), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+ new->vm_active = 1;
+
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+ struct arm_vmregion *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_active && c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+ struct arm_vmregion *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+ c = __arm_vmregion_find(head, addr);
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ return c;
+}
+
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+ struct arm_vmregion *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+ c = __arm_vmregion_find(head, addr);
+ if (c)
+ c->vm_active = 0;
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ return c;
+}
+
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+ list_del(&c->vm_list);
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+
+ kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 0000000..6b2cdbd
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct page;
+
+struct arm_vmregion_head {
+ spinlock_t vm_lock;
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+};
+
+struct arm_vmregion {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+ struct page *vm_pages;
+ int vm_active;
+};
+
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+
+#endif
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 0000000..159daf5
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+
+config PLAT_NOMADIK
+ bool
+ depends on ARCH_NOMADIK || ARCH_U8500
+ default y
+ help
+ Common platform code for Nomadik and other ST-Ericsson
+ platforms.
+
+if PLAT_NOMADIK
+
+config HAS_MTU
+ bool
+ help
+ Support for Multi Timer Unit. MTU provides access
+ to multiple interrupt generating programmable
+ 32-bit free running decrementing counters.
+
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 0000000..37c7cdd
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+
+obj-$(CONFIG_HAS_MTU) += timer.o
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
similarity index 90%
rename from arch/arm/mach-nomadik/include/mach/mtu.h
rename to arch/arm/plat-nomadik/include/plat/mtu.h
index 76da7f0..42c9072 100644
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,5 +1,8 @@
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
+#ifndef __PLAT_MTU_H
+#define __PLAT_MTU_H
+
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
/*
* The MTU device hosts four different counters, with 4 set of
@@ -41,5 +44,5 @@
#define MTU_PCELL2 0xff8
#define MTU_PCELL3 0xffC
-#endif /* __ASM_ARCH_MTU_H */
+#endif /* __PLAT_MTU_H */
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
similarity index 81%
rename from arch/arm/mach-nomadik/timer.c
rename to arch/arm/plat-nomadik/timer.c
index d1738e7..62f18ad 100644
--- a/arch/arm/mach-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -15,19 +15,14 @@
#include <linux/clockchips.h>
#include <linux/jiffies.h>
#include <asm/mach/time.h>
-#include <mach/mtu.h>
-#define TIMER_CTRL 0x80 /* No divisor */
-#define TIMER_PERIODIC 0x40
-#define TIMER_SZ32BIT 0x02
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
+#include <plat/mtu.h>
static u32 nmdk_count; /* accumulated count */
static u32 nmdk_cycle; /* write-once */
-static __iomem void *mtu_base;
+
+/* setup by the platform code */
+void __iomem *mtu_base;
/*
* clocksource: the MTU device is a decrementing counters, so we negate
@@ -93,7 +88,7 @@
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
{
/* ack: "interrupt clear register" */
- writel( 1 << 0, mtu_base + MTU_ICR);
+ writel(1 << 0, mtu_base + MTU_ICR);
/* we can't count lost ticks, unfortunately */
nmdk_count += nmdk_cycle;
@@ -125,24 +120,14 @@
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
}
-static void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void)
{
- u32 src_cr;
unsigned long rate;
int bits;
rate = CLOCK_TICK_RATE; /* 2.4MHz */
nmdk_cycle = (rate + HZ/2) / HZ;
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
- /* Save global pointer to mtu, used by functions above */
- mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
/* Init the timer and register clocksource */
nmdk_timer_reset();
@@ -150,7 +135,9 @@
bits = 8*sizeof(nmdk_count);
nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
- clocksource_register(&nmdk_clksrc);
+ if (clocksource_register(&nmdk_clksrc))
+ printk(KERN_ERR "timer: failed to initialize clock "
+ "source %s\n", nmdk_clksrc.name);
/* Register irq and clockevents */
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
@@ -158,7 +145,3 @@
nmdk_clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&nmdk_clkevt);
}
-
-struct sys_timer nomadik_timer = {
- .init = nmdk_timer_init,
-};
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 9ad41dc..3325f7b 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -68,6 +68,13 @@
__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
__dma; })
+#define __arch_dma_to_page(dev, addr) \
+ ({ dma_addr_t __dma = addr; \
+ if (is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
+ phys_to_page(__dma); \
+ })
+
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
__phys_to_virt(addr)); })
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b401dad..eb140ff 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -54,7 +54,7 @@
config AT_HDMAC
tristate "Atmel AHB DMA support"
- depends on ARCH_AT91SAM9RL
+ depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
select DMA_ENGINE
help
Support the Atmel AHB DMA controller. This can be integrated in
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a589..90d168a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
