6lowpan: fix udp byte ordering
The incoming udp header in lowpan_compress_udp_header function is
already in network byte order.
Everytime we read this values for source and destination port we need
to convert this value to host byte order.
In the outcoming header we need to set this value in network byte order
which the upcoming process assumes.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
diff --git a/net/ieee802154/6lowpan_iphc.c b/net/ieee802154/6lowpan_iphc.c
index 1933f5b..02bf74d 100644
--- a/net/ieee802154/6lowpan_iphc.c
+++ b/net/ieee802154/6lowpan_iphc.c
@@ -283,20 +283,21 @@
break;
case LOWPAN_NHC_UDP_CS_P_01:
memcpy(&uh->source, &skb->data[0], 2);
- uh->dest =
- skb->data[2] + LOWPAN_NHC_UDP_8BIT_PORT;
+ uh->dest = htons(skb->data[2] +
+ LOWPAN_NHC_UDP_8BIT_PORT);
skb_pull(skb, 3);
break;
case LOWPAN_NHC_UDP_CS_P_10:
- uh->source = skb->data[0] + LOWPAN_NHC_UDP_8BIT_PORT;
+ uh->source = htons(skb->data[0] +
+ LOWPAN_NHC_UDP_8BIT_PORT);
memcpy(&uh->dest, &skb->data[1], 2);
skb_pull(skb, 3);
break;
case LOWPAN_NHC_UDP_CS_P_11:
- uh->source =
- LOWPAN_NHC_UDP_4BIT_PORT + (skb->data[0] >> 4);
- uh->dest =
- LOWPAN_NHC_UDP_4BIT_PORT + (skb->data[0] & 0x0f);
+ uh->source = htons(LOWPAN_NHC_UDP_4BIT_PORT +
+ (skb->data[0] >> 4));
+ uh->dest = htons(LOWPAN_NHC_UDP_4BIT_PORT +
+ (skb->data[0] & 0x0f));
skb_pull(skb, 1);
break;
default:
@@ -306,7 +307,7 @@
}
pr_debug("uncompressed UDP ports: src = %d, dst = %d\n",
- uh->source, uh->dest);
+ ntohs(uh->source), ntohs(uh->dest));
/* copy checksum */
memcpy(&uh->check, &skb->data[0], 2);
@@ -318,7 +319,7 @@
* frame
*/
uh->len = htons(skb->len + sizeof(struct udphdr));
- pr_debug("uncompressed UDP length: src = %d", uh->len);
+ pr_debug("uncompressed UDP length: src = %d", ntohs(uh->len));
} else {
pr_debug("ERROR: unsupported NH format\n");
goto err;
@@ -543,31 +544,31 @@
struct udphdr *uh = udp_hdr(skb);
u8 tmp;
- if (((uh->source & LOWPAN_NHC_UDP_4BIT_MASK) ==
- LOWPAN_NHC_UDP_4BIT_PORT) &&
- ((uh->dest & LOWPAN_NHC_UDP_4BIT_MASK) ==
- LOWPAN_NHC_UDP_4BIT_PORT)) {
+ if (((ntohs(uh->source) & LOWPAN_NHC_UDP_4BIT_MASK) ==
+ LOWPAN_NHC_UDP_4BIT_PORT) &&
+ ((ntohs(uh->dest) & LOWPAN_NHC_UDP_4BIT_MASK) ==
+ LOWPAN_NHC_UDP_4BIT_PORT)) {
pr_debug("UDP header: both ports compression to 4 bits\n");
tmp = LOWPAN_NHC_UDP_CS_P_11;
lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
tmp = /* subtraction is faster */
- (u8)((uh->dest - LOWPAN_NHC_UDP_4BIT_PORT) +
- ((uh->source & LOWPAN_NHC_UDP_4BIT_PORT) << 4));
+ (u8)((ntohs(uh->dest) - LOWPAN_NHC_UDP_4BIT_PORT) +
+ ((ntohs(uh->source) & LOWPAN_NHC_UDP_4BIT_PORT) << 4));
lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
- } else if ((uh->dest & LOWPAN_NHC_UDP_8BIT_MASK) ==
+ } else if ((ntohs(uh->dest) & LOWPAN_NHC_UDP_8BIT_MASK) ==
LOWPAN_NHC_UDP_8BIT_PORT) {
pr_debug("UDP header: remove 8 bits of dest\n");
tmp = LOWPAN_NHC_UDP_CS_P_01;
lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
lowpan_push_hc_data(hc06_ptr, &uh->source, sizeof(uh->source));
- tmp = (u8)(uh->dest - LOWPAN_NHC_UDP_8BIT_PORT);
+ tmp = (u8)(ntohs(uh->dest) - LOWPAN_NHC_UDP_8BIT_PORT);
lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
- } else if ((uh->source & LOWPAN_NHC_UDP_8BIT_MASK) ==
+ } else if ((ntohs(uh->source) & LOWPAN_NHC_UDP_8BIT_MASK) ==
LOWPAN_NHC_UDP_8BIT_PORT) {
pr_debug("UDP header: remove 8 bits of source\n");
tmp = LOWPAN_NHC_UDP_CS_P_10;
lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
- tmp = (u8)(uh->source - LOWPAN_NHC_UDP_8BIT_PORT);
+ tmp = (u8)(ntohs(uh->source) - LOWPAN_NHC_UDP_8BIT_PORT);
lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
lowpan_push_hc_data(hc06_ptr, &uh->dest, sizeof(uh->dest));
} else {
