diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index b36b84f..69b7f8e 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -391,7 +391,7 @@
  */
 #ifdef CONFIG_USB_LIBUSUAL
 
-#define ub_usb_ids  storage_usb_ids
+#define ub_usb_ids  usb_storage_usb_ids
 #else
 
 static struct usb_device_id ub_usb_ids[] = {
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index b320693..a9e475e 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -25,6 +25,8 @@
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
 
-ifneq ($(CONFIG_USB_LIBUSUAL),)
-	obj-$(CONFIG_USB)	+= libusual.o
+ifeq ($(CONFIG_USB_LIBUSUAL),)
+	usb-storage-objs	+= usual-tables.o
+else
+	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
 endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index f970b27..fe3ffe1 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -38,37 +38,6 @@
 static int usu_probe_thread(void *arg);
 
 /*
- * The table.
- */
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName, useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
-  .driver_info = (flags) }
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = ((useType)<<24) }
-
-struct usb_device_id storage_usb_ids [] = {
-#	include "unusual_devs.h"
-	{ } /* Terminating entry */
-};
-
-#undef USUAL_DEV
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-
-MODULE_DEVICE_TABLE(usb, storage_usb_ids);
-EXPORT_SYMBOL_GPL(storage_usb_ids);
-
-/*
  * @type: the module type as an integer
  */
 void usb_usual_set_present(int type)
@@ -167,7 +136,7 @@
 	.name =		"libusual",
 	.probe =	usu_probe,
 	.disconnect =	usu_disconnect,
-	.id_table =	storage_usb_ids,
+	.id_table =	usb_storage_usb_ids,
 };
 
 /*
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index be441d8..fc310f7 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -121,6 +121,7 @@
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command);
 
 /***********************************************************************
  * Scatter-gather transfer buffer access routines
@@ -199,6 +200,7 @@
 	/* Return the amount actually transferred */
 	return cnt;
 }
+EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf);
 
 /* Store the contents of buffer into srb's transfer buffer and set the
  * SCSI residue.
@@ -215,3 +217,4 @@
 	if (buflen < scsi_bufflen(srb))
 		scsi_set_resid(srb, scsi_bufflen(srb) - buflen);
 }
+EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index ed710bc..4ca3b58 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -569,4 +569,4 @@
 	[7]	= 0x0a,			    /* additional length */
 	[12]	= 0x24			    /* Invalid Field in CDB */
 };
-
+EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fb65d221..d48c855 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -220,6 +220,7 @@
 		status = us->current_urb->actual_length;
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_stor_control_msg);
 
 /* This is a version of usb_clear_halt() that allows early termination and
  * doesn't read the status from the device -- this is because some devices
@@ -254,6 +255,7 @@
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_clear_halt);
 
 
 /*
@@ -352,6 +354,7 @@
 	return interpret_urb_result(us, pipe, size, result,
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer);
 
 /*
  * Receive one interrupt buffer, without timeouts, but allowing early
@@ -407,6 +410,7 @@
 	return interpret_urb_result(us, pipe, length, result, 
 			us->current_urb->actual_length);
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf);
 
 /*
  * Transfer a scatter-gather list via bulk transfer
@@ -474,6 +478,7 @@
 	scsi_set_resid(srb, scsi_bufflen(srb) - partial);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_srb);
 
 /*
  * Transfer an entire SCSI command's worth of data payload over the bulk
@@ -509,6 +514,7 @@
 		*residual = length_left;
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg);
 
 /***********************************************************************
  * Transport routines
@@ -940,6 +946,7 @@
 		usb_stor_clear_halt(us, pipe);
 	return USB_STOR_TRANSPORT_FAILED;
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_transport);
 
 /*
  * Bulk only transport
@@ -1156,6 +1163,7 @@
 	/* we should never get here, but if we do, we're in trouble */
 	return USB_STOR_TRANSPORT_ERROR;
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport);
 
 /***********************************************************************
  * Reset routines
@@ -1230,6 +1238,7 @@
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE);
 }
+EXPORT_SYMBOL_GPL(usb_stor_CB_reset);
 
 /* This issues a Bulk-only Reset to the device in question, including
  * clearing the subsequent endpoint halts that may occur.
@@ -1242,6 +1251,7 @@
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 				 0, us->ifnum, NULL, 0);
 }
+EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset);
 
 /* Issue a USB port reset to the device.  The caller must not hold
  * us->dev_mutex.
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index b01dade..490ea76 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -5,7 +5,7 @@
  *
  * Developed with the assistance of:
  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
- *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
+ *   (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
  *
  * Initial work by:
  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
@@ -118,36 +118,8 @@
 
 /*
  * The entries in this table correspond, line for line,
- * with the entries of us_unusual_dev_list[].
+ * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
  */
-#ifndef CONFIG_USB_LIBUSUAL
-
-#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
-		    vendorName, productName,useProtocol, useTransport, \
-		    initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
-  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
-
-#define COMPLIANT_DEV	UNUSUAL_DEV
-
-#define USUAL_DEV(useProto, useTrans, useType) \
-{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
-  .driver_info = (USB_US_TYPE_STOR<<24) }
-
-static struct usb_device_id storage_usb_ids [] = {
-
-#	include "unusual_devs.h"
-#undef UNUSUAL_DEV
-#undef COMPLIANT_DEV
-#undef USUAL_DEV
-	/* Terminating entry */
-	{ }
-};
-
-MODULE_DEVICE_TABLE (usb, storage_usb_ids);
-#endif /* CONFIG_USB_LIBUSUAL */
-
-/* This is the list of devices we recognize, along with their flag data */
 
 /* The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
@@ -179,18 +151,17 @@
 
 static struct us_unusual_dev us_unusual_dev_list[] = {
 #	include "unusual_devs.h" 
-#	undef UNUSUAL_DEV
-#	undef COMPLIANT_DEV
-#	undef USUAL_DEV
-
-	/* Terminating entry */
-	{ NULL }
+	{ }		/* Terminating entry */
 };
 
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
 
 #ifdef CONFIG_PM	/* Minimal support for suspend and resume */
 
-static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -207,8 +178,9 @@
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_suspend);
 
-static int storage_resume(struct usb_interface *iface)
+int usb_stor_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -221,8 +193,9 @@
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_resume);
 
-static int storage_reset_resume(struct usb_interface *iface)
+int usb_stor_reset_resume(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -235,6 +208,7 @@
 	 * the device */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
 
 #endif /* CONFIG_PM */
 
@@ -243,7 +217,7 @@
  * a USB port reset, whether from this driver or a different one.
  */
 
-static int storage_pre_reset(struct usb_interface *iface)
+int usb_stor_pre_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -253,8 +227,9 @@
 	mutex_lock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
 
-static int storage_post_reset(struct usb_interface *iface)
+int usb_stor_post_reset(struct usb_interface *iface)
 {
 	struct us_data *us = usb_get_intfdata(iface);
 
@@ -269,6 +244,7 @@
 	mutex_unlock(&us->dev_mutex);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_stor_post_reset);
 
 /*
  * fill_inquiry_response takes an unsigned char array (which must
@@ -311,6 +287,7 @@
 
 	usb_stor_set_xfer_buf(data, data_len, us->srb);
 }
+EXPORT_SYMBOL_GPL(fill_inquiry_response);
 
 static int usb_stor_control_thread(void * __us)
 {
@@ -551,20 +528,13 @@
 			vid, pid, f);
 }
 
-/* Find an unusual_dev descriptor (always succeeds in the current code) */
-static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
-{
-	const int id_index = id - storage_usb_ids;
-	return &us_unusual_dev_list[id_index];
-}
-
 /* Get the unusual_devs entries and the string descriptors */
-static int get_device_info(struct us_data *us, const struct usb_device_id *id)
+static int get_device_info(struct us_data *us, const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
 		&us->pusb_intf->cur_altsetting->desc;
-	struct us_unusual_dev *unusual_dev = find_unusual(id);
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
@@ -629,7 +599,7 @@
 }
 
 /* Get the transport settings */
-static int get_transport(struct us_data *us)
+static void get_transport(struct us_data *us)
 {
 	switch (us->protocol) {
 	case US_PR_CB:
@@ -732,19 +702,11 @@
 		break;
 #endif
 
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Transport: %s\n", us->transport_name);
-
-	/* fix for single-lun devices */
-	if (us->fflags & US_FL_SINGLE_LUN)
-		us->max_lun = 0;
-	return 0;
 }
 
 /* Get the protocol settings */
-static int get_protocol(struct us_data *us)
+static void get_protocol(struct us_data *us)
 {
 	switch (us->subclass) {
 	case US_SC_RBC:
@@ -794,11 +756,7 @@
 		break;
 #endif
 
-	default:
-		return -EIO;
 	}
-	US_DEBUGP("Protocol: %s\n", us->protocol_name);
-	return 0;
 }
 
 /* Get the pipe settings */
@@ -1012,17 +970,15 @@
 }
 
 
-/* Probe to see if we can drive a newly-connected USB device */
-static int storage_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
+/* First part of general USB mass-storage probing */
+int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev)
 {
 	struct Scsi_Host *host;
 	struct us_data *us;
 	int result;
-	struct task_struct *th;
-
-	if (usb_usual_check_type(id, USB_US_TYPE_STOR))
-		return -ENXIO;
 
 	US_DEBUGP("USB Mass Storage device detected\n");
 
@@ -1041,7 +997,7 @@
 	 * Allow 16-byte CDBs and thus > 2TB
 	 */
 	host->max_cmd_len = 16;
-	us = host_to_us(host);
+	*pus = us = host_to_us(host);
 	memset(us, 0, sizeof(struct us_data));
 	mutex_init(&(us->dev_mutex));
 	init_completion(&us->cmnd_ready);
@@ -1054,24 +1010,46 @@
 	if (result)
 		goto BadDevice;
 
-	/*
-	 * Get the unusual_devs entries and the descriptors
-	 *
-	 * id_index is calculated in the declaration to be the index number
-	 * of the match from the usb_device_id table, so we can find the
-	 * corresponding entry in the private table.
-	 */
-	result = get_device_info(us, id);
+	/* Get the unusual_devs entries and the descriptors */
+	result = get_device_info(us, id, unusual_dev);
 	if (result)
 		goto BadDevice;
 
-	/* Get the transport, protocol, and pipe settings */
-	result = get_transport(us);
-	if (result)
+	/* Get standard transport and protocol settings */
+	get_transport(us);
+	get_protocol(us);
+
+	/* Give the caller a chance to fill in specialized transport
+	 * or protocol settings.
+	 */
+	return 0;
+
+BadDevice:
+	US_DEBUGP("storage_probe() failed\n");
+	release_everything(us);
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_stor_probe1);
+
+/* Second part of general USB mass-storage probing */
+int usb_stor_probe2(struct us_data *us)
+{
+	struct task_struct *th;
+	int result;
+
+	/* Make sure the transport and protocol have both been set */
+	if (!us->transport || !us->proto_handler) {
+		result = -ENXIO;
 		goto BadDevice;
-	result = get_protocol(us);
-	if (result)
-		goto BadDevice;
+	}
+	US_DEBUGP("Transport: %s\n", us->transport_name);
+	US_DEBUGP("Protocol: %s\n", us->protocol_name);
+
+	/* fix for single-lun devices */
+	if (us->fflags & US_FL_SINGLE_LUN)
+		us->max_lun = 0;
+
+	/* Find the endpoints and calculate pipe values */
 	result = get_pipes(us);
 	if (result)
 		goto BadDevice;
@@ -1080,7 +1058,7 @@
 	result = usb_stor_acquire_resources(us);
 	if (result)
 		goto BadDevice;
-	result = scsi_add_host(host, &intf->dev);
+	result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev);
 	if (result) {
 		printk(KERN_WARNING USB_STORAGE
 			"Unable to add the scsi host\n");
@@ -1108,9 +1086,10 @@
 	release_everything(us);
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_stor_probe2);
 
-/* Handle a disconnect event from the USB core */
-static void storage_disconnect(struct usb_interface *intf)
+/* Handle a USB mass-storage disconnect */
+void usb_stor_disconnect(struct usb_interface *intf)
 {
 	struct us_data *us = usb_get_intfdata(intf);
 
@@ -1118,6 +1097,42 @@
 	quiesce_and_remove_host(us);
 	release_everything(us);
 }
+EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+
+/* The main probe routine for standard devices */
+static int storage_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	/*
+	 * If libusual is configured, let it decide whether a standard
+	 * device should be handled by usb-storage or by ub.
+	 * If the device isn't standard (is handled by a subdriver
+	 * module) then don't accept it.
+	 */
+	if (usb_usual_check_type(id, USB_US_TYPE_STOR) ||
+			usb_usual_ignore_device(intf))
+		return -ENXIO;
+
+	/*
+	 * Call the general probe procedures.
+	 *
+	 * The unusual_dev_list array is parallel to the usb_storage_usb_ids
+	 * table, so we use the index of the id entry to find the
+	 * corresponding unusual_devs entry.
+	 */
+	result = usb_stor_probe1(&us, intf, id,
+			(id - usb_storage_usb_ids) + us_unusual_dev_list);
+	if (result)
+		return result;
+
+	/* No special transport or protocol settings in the main module */
+
+	result = usb_stor_probe2(us);
+	return result;
+}
 
 /***********************************************************************
  * Initialization and registration
@@ -1126,15 +1141,13 @@
 static struct usb_driver usb_storage_driver = {
 	.name =		"usb-storage",
 	.probe =	storage_probe,
-	.disconnect =	storage_disconnect,
-#ifdef CONFIG_PM
-	.suspend =	storage_suspend,
-	.resume =	storage_resume,
-	.reset_resume =	storage_reset_resume,
-#endif
-	.pre_reset =	storage_pre_reset,
-	.post_reset =	storage_post_reset,
-	.id_table =	storage_usb_ids,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	usb_storage_usb_ids,
 	.soft_unbind =	1,
 };
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 65e674e..2609efb 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -177,4 +177,25 @@
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data **pus,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
 #endif
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
new file mode 100644
index 0000000..1924e32
--- /dev/null
+++ b/drivers/usb/storage/usual-tables.c
@@ -0,0 +1,105 @@
+/* Driver for USB Mass Storage devices
+ * Usual Tables File for usb-storage and libusual
+ *
+ * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu)
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+  .driver_info = ((useType)<<24) }
+
+struct usb_device_id usb_storage_usb_ids[] = {
+#	include "unusual_devs.h"
+	{ }		/* Terminating entry */
+};
+EXPORT_SYMBOL_GPL(usb_storage_usb_ids);
+
+MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids);
+
+#undef UNUSUAL_DEV
+#undef COMPLIANT_DEV
+#undef USUAL_DEV
+
+
+/*
+ * The table of devices to ignore
+ */
+struct ignore_entry {
+	u16	vid, pid, bcdmin, bcdmax;
+};
+
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{					\
+	.vid	= id_vendor,		\
+	.pid 	= id_product,		\
+	.bcdmin	= bcdDeviceMin,		\
+	.bcdmax = bcdDeviceMax,		\
+}
+
+static struct ignore_entry ignore_ids[] = {
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
+/* Return an error if a device is in the ignore_ids list */
+int usb_usual_ignore_device(struct usb_interface *intf)
+{
+	struct usb_device *udev;
+	unsigned vid, pid, bcd;
+	struct ignore_entry *p;
+
+	udev = interface_to_usbdev(intf);
+	vid = le16_to_cpu(udev->descriptor.idVendor);
+	pid = le16_to_cpu(udev->descriptor.idProduct);
+	bcd = le16_to_cpu(udev->descriptor.bcdDevice);
+
+	for (p = ignore_ids; p->vid; ++p) {
+		if (p->vid == vid && p->pid == pid &&
+				p->bcdmin <= bcd && p->bcdmax >= bcd)
+			return -ENXIO;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_usual_ignore_device);
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 1eea1ab..3d15fb9 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -96,39 +96,26 @@
 #define US_PR_CBI	0x00		/* Control/Bulk/Interrupt */
 #define US_PR_CB	0x01		/* Control/Bulk w/o interrupt */
 #define US_PR_BULK	0x50		/* bulk only */
-#ifdef CONFIG_USB_STORAGE_USBAT
+
 #define US_PR_USBAT	0x80		/* SCM-ATAPI bridge */
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
 #define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
 #define US_PR_SDDR55	0x82		/* SDDR-55 (made up) */
-#endif
 #define US_PR_DPCM_USB  0xf0		/* Combination CB/SDDR09 */
-#ifdef CONFIG_USB_STORAGE_FREECOM
 #define US_PR_FREECOM   0xf1		/* Freecom */
-#endif
-#ifdef CONFIG_USB_STORAGE_DATAFAB
 #define US_PR_DATAFAB   0xf2		/* Datafab chipsets */
-#endif
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
 #define US_PR_JUMPSHOT  0xf3		/* Lexar Jumpshot */
-#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
 #define US_PR_ALAUDA    0xf4		/* Alauda chipsets */
-#endif
-#ifdef CONFIG_USB_STORAGE_KARMA
 #define US_PR_KARMA     0xf5		/* Rio Karma */
-#endif
 
 #define US_PR_DEVICE	0xff		/* Use device's value */
 
 /*
  */
+extern int usb_usual_ignore_device(struct usb_interface *intf);
+extern struct usb_device_id usb_storage_usb_ids[];
+
 #ifdef CONFIG_USB_LIBUSUAL
 
-extern struct usb_device_id storage_usb_ids[];
 extern void usb_usual_set_present(int type);
 extern void usb_usual_clear_present(int type);
 extern int usb_usual_check_type(const struct usb_device_id *, int type);