diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index f4f8b1c..23045b8 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -149,7 +149,7 @@
 	int cpu;
 
 	/* Increment the counters */
-	on_each_cpu(test_each, NULL, 0, 1);
+	on_each_cpu(test_each, NULL, 1);
 	/* Read all the counters */
 	printk("Counters read from CPU %d\n", smp_processor_id());
 	for_each_online_cpu(cpu) {
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f2b67e..24741de 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3759,6 +3759,15 @@
 L:	sdhci-devel@list.drzeus.cx
 S:	Maintained
 
+SECURITY SUBSYSTEM
+F:	security/
+P:	James Morris
+M:	jmorris@namei.org
+L:	linux-kernel@vger.kernel.org
+L:	linux-security-module@vger.kernel.org (suggested Cc:)
+T:	git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S:	Supported
+
 SECURITY CONTACT
 P:	Security Officers
 M:	security@kernel.org
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index 6209800..b6698a2 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -1,63 +1,78 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Mon Jun 11 00:23:51 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 17:53:48 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_LEMOTE_FULONG=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_LEMOTE_FULONG=y
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 
 #
 # CPU selection
@@ -75,6 +90,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -101,7 +117,6 @@
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_WB=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -109,6 +124,7 @@
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -117,9 +133,17 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -133,37 +157,40 @@
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="lm32"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -175,6 +202,8 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -183,29 +212,33 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -219,19 +252,19 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_ISA=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -239,8 +272,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -251,14 +285,12 @@
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_NET=y
 
 #
@@ -271,6 +303,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -294,18 +327,17 @@
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
@@ -313,53 +345,59 @@
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -371,6 +409,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -380,10 +419,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,23 +427,25 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_PHONET=m
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 # CONFIG_IEEE80211_CRYPT_CCMP is not set
 # CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
 # CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
 
 #
 # Device Drivers
@@ -417,14 +454,13 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
@@ -443,6 +479,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -482,6 +519,7 @@
 CONFIG_MTD_PHYSMAP_START=0x1fc00000
 CONFIG_MTD_PHYSMAP_LEN=0x80000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -506,21 +544,9 @@
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
 # CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -534,32 +560,28 @@
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 CONFIG_IDE_TASK_IOCTL=y
 CONFIG_IDE_PROC_FS=y
@@ -568,24 +590,25 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -601,17 +624,28 @@
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -644,88 +678,30 @@
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=m
 
@@ -740,29 +716,32 @@
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -773,7 +752,6 @@
 # CONFIG_FORCEDETH is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -785,15 +763,21 @@
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -801,20 +785,29 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -822,6 +815,7 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -830,7 +824,6 @@
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -844,25 +837,17 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_NET_FC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -870,6 +855,7 @@
 #
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -879,7 +865,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -900,9 +885,11 @@
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -927,10 +914,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -951,105 +941,152 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_BT848 is not set
@@ -1058,17 +1095,46 @@
 # CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
 # CONFIG_VIDEO_STRADIS is not set
 # CONFIG_VIDEO_SAA7134 is not set
 # CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
 # CONFIG_VIDEO_IVTV is not set
 # CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
 CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
 # CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_EM28XX is not set
 # CONFIG_VIDEO_USBVISION is not set
@@ -1079,7 +1145,6 @@
 CONFIG_USB_QUICKCAM_MESSENGER=m
 CONFIG_USB_ET61X251=m
 # CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
 CONFIG_USB_OV511=m
 CONFIG_USB_SE401=m
 CONFIG_USB_SN9C102=m
@@ -1088,6 +1153,8 @@
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
 # CONFIG_USB_ZR364XX is not set
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_CADET is not set
 # CONFIG_RADIO_RTRACK is not set
@@ -1104,33 +1171,30 @@
 # CONFIG_RADIO_TYPHOON is not set
 # CONFIG_RADIO_ZOLTRIX is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_BACKLIGHT=y
@@ -1158,16 +1222,30 @@
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -1176,20 +1254,14 @@
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1201,28 +1273,22 @@
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -1231,10 +1297,12 @@
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -1259,6 +1327,7 @@
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1276,43 +1345,26 @@
 # CONFIG_SND_TRIDENT is not set
 CONFIG_SND_VIA82XX=m
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
 
 #
@@ -1322,13 +1374,39 @@
 # CONFIG_USB_MOUSE is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
@@ -1338,35 +1416,46 @@
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
 
 #
 # USB Host Controller Drivers
 #
+CONFIG_USB_C67X00_HCD=m
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=y
 CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1379,7 +1468,9 @@
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1387,15 +1478,10 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1404,7 +1490,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+CONFIG_USB_SEVSEG=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1421,56 +1507,75 @@
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
 #
 
 #
-# Real Time Clock
+# Platform RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_CMOS=m
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Engine support
+# on-CPU RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1478,27 +1583,31 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
@@ -1530,11 +1639,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1550,25 +1659,23 @@
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1576,7 +1683,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1616,10 +1723,6 @@
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1660,30 +1763,31 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1691,64 +1795,113 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
 #
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index f719bf5..1158228 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,30 +1,34 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 12:39:49 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 15:41:33 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -35,34 +39,49 @@
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
+CONFIG_SGI_HAS_INDYDOG=y
+CONFIG_SGI_HAS_HAL2=y
+CONFIG_SGI_HAS_SEEQ=y
+CONFIG_SGI_HAS_WD93=y
+CONFIG_SGI_HAS_ZILOG=y
+CONFIG_SGI_HAS_I8042=y
+CONFIG_DEFAULT_SGI_PARTITION=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=7
 CONFIG_ARC_CONSOLE=y
 CONFIG_ARC_PROMLIB=y
 
@@ -82,6 +101,7 @@
 # CONFIG_CPU_TX49XX is not set
 CONFIG_CPU_R5000=y
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -115,18 +135,24 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -159,13 +185,20 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -177,6 +210,8 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -185,14 +220,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -203,6 +245,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -216,6 +259,8 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -224,29 +269,24 @@
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_EISA is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -259,6 +299,8 @@
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -282,13 +324,115 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
 # CONFIG_IP_VS_DEBUG is not set
 CONFIG_IP_VS_TAB_BITS=12
 
@@ -297,6 +441,7 @@
 #
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
 
@@ -318,107 +463,19 @@
 # IPVS application helper
 #
 CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -426,11 +483,13 @@
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -439,32 +498,30 @@
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -479,6 +536,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -488,12 +546,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -502,7 +555,7 @@
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -526,6 +579,7 @@
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
@@ -533,35 +587,28 @@
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
 # CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+# CONFIG_WIRELESS is not set
 CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=m
 # CONFIG_NET_9P is not set
@@ -588,7 +635,9 @@
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -628,20 +677,22 @@
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
+CONFIG_VETH=m
 CONFIG_PHYLIB=m
 
 #
@@ -656,11 +707,21 @@
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
 # CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_SGISEEQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -672,12 +733,12 @@
 CONFIG_STRIP=m
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=m
 # CONFIG_HOSTAP_FIRMWARE is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -699,7 +760,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -720,6 +780,7 @@
 # CONFIG_MOUSE_PS2_SYNAPTICS is not set
 # CONFIG_MOUSE_PS2_LIFEBOOK is not set
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -742,9 +803,11 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -761,6 +824,17 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=m
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -769,47 +843,50 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -823,48 +900,77 @@
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+CONFIG_HID_PID=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_DS1286=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -876,29 +982,33 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
@@ -929,11 +1039,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -949,27 +1059,25 @@
 CONFIG_EFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -977,7 +1085,7 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -986,12 +1094,12 @@
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_UPCALL=y
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1015,10 +1123,6 @@
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1059,30 +1163,32 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 CONFIG_DLM=m
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1091,46 +1197,97 @@
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
 
 #
@@ -1139,12 +1296,15 @@
 CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 74daa0c..1ecdd3b 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 12:59:29 2007
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec  1 08:08:19 2008
 #
 CONFIG_MIPS=y
 
@@ -11,20 +11,25 @@
 CONFIG_ZONE_DMA=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -35,13 +40,14 @@
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -51,21 +57,26 @@
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_BOOT_RAW=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_I8259=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_PCI_GT64XXX_PCI0=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
@@ -74,10 +85,6 @@
 #
 # CPU selection
 #
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 CONFIG_CPU_MIPS32_R2=y
@@ -91,6 +98,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -108,6 +116,7 @@
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -125,6 +134,8 @@
 CONFIG_MIPS_MT_SMP=y
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_MIPS_MT=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
 # CONFIG_MIPS_VPE_LOADER is not set
@@ -132,7 +143,6 @@
 # CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_SRS=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -140,22 +150,30 @@
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_SMARTMIPS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_SMP=y
+CONFIG_SMP_UP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_2=y
 CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -168,7 +186,6 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -189,13 +206,19 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+CONFIG_PID_NS=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -207,6 +230,8 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -215,14 +240,23 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -234,6 +268,7 @@
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -247,19 +282,19 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
 CONFIG_I8253=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -267,6 +302,8 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -274,12 +311,7 @@
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,6 +324,8 @@
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -323,13 +357,116 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
 # CONFIG_IP_VS_DEBUG is not set
 CONFIG_IP_VS_TAB_BITS=12
 
@@ -338,6 +475,7 @@
 #
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
 
@@ -359,108 +497,19 @@
 # IPVS application helper
 #
 CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -468,11 +517,13 @@
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -481,40 +532,34 @@
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -523,6 +568,7 @@
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,6 +581,7 @@
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
 # CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
@@ -544,8 +591,12 @@
 CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -559,12 +610,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -573,7 +619,7 @@
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -597,6 +643,7 @@
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
@@ -604,37 +651,51 @@
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
 CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
 
 #
-# Wireless
+# Rate control algorithm selection
 #
-CONFIG_CFG80211=m
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -644,9 +705,12 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
@@ -655,6 +719,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -667,6 +732,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
 
 #
 # RAM/ROM/Flash chip drivers
@@ -701,6 +767,7 @@
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -748,25 +815,26 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -775,24 +843,25 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -808,10 +877,7 @@
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -848,8 +914,10 @@
 #
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_TGT_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
@@ -866,6 +934,7 @@
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -876,6 +945,7 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -887,6 +957,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -905,32 +976,28 @@
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=m
 
@@ -946,26 +1013,34 @@
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=m
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -973,16 +1048,21 @@
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -995,14 +1075,24 @@
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -1022,6 +1112,7 @@
 # CONFIG_IPW2200_DEBUG is not set
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 CONFIG_HERMES=m
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
@@ -1030,25 +1121,30 @@
 CONFIG_ATMEL=m
 CONFIG_PCI_ATMEL=m
 CONFIG_PRISM54=m
+# CONFIG_RTL8180 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_PLX=m
 CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -1070,7 +1166,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -1099,10 +1194,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1124,101 +1222,165 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-CONFIG_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1230,9 +1392,8 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
@@ -1246,22 +1407,22 @@
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -1291,11 +1452,11 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1312,46 +1473,48 @@
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 CONFIG_JFFS2_FS_XATTR=y
 CONFIG_JFFS2_FS_POSIX_ACL=y
 CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1365,10 +1528,6 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1409,29 +1568,30 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1439,51 +1599,103 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1491,7 +1703,8 @@
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 759f680..d0916a5 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -262,14 +262,11 @@
 	LEAF(sys_syscall)
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, einval		# do not recurse
 	sll	t1, t0, 3
 	beqz	v0, einval
-
 	lw	t2, sys_call_table(t1)		# syscall routine
 
-	li	v1, 4000 - __NR_O32_Linux	# index of sys_syscall
-	beq	t0, v1, einval			# do not recurse
-
 	/* Some syscalls like execve get their arguments from struct pt_regs
 	   and claim zero arguments in the syscall table. Thus we have to
 	   assume the worst case and shuffle around all potential arguments.
@@ -627,7 +624,7 @@
 	sys	sys_pselect6		6
 	sys	sys_ppoll		5
 	sys	sys_unshare		1
-	sys	sys_splice		4
+	sys	sys_splice		6
 	sys	sys_sync_file_range	7	/* 4305 */
 	sys	sys_tee			4
 	sys	sys_vmsplice		4
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e266b3a..30f3b63 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -390,7 +390,7 @@
 	PTR	sys_splice
 	PTR	sys_sync_file_range
 	PTR	sys_tee
-	PTR	sys_vmsplice			/* 6270 */
+	PTR	compat_sys_vmsplice		/* 6270 */
 	PTR	sys_move_pages
 	PTR	compat_sys_set_robust_list
 	PTR	compat_sys_get_robust_list
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 6c7ef83..fefef4a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -174,14 +174,12 @@
 	END(handle_sys)
 
 LEAF(sys32_syscall)
-	sltu	v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1
+	subu	t0, a0, __NR_O32_Linux	# check syscall number
+	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, einval		# do not recurse
+	dsll	t1, t0, 3
 	beqz	v0, einval
-
-	dsll	v0, a0, 3
-	ld	t2, (sys_call_table - (__NR_O32_Linux * 8))(v0)
-
-	li	v1, 4000		# indirect syscall number
-	beq	a0, v1, einval		# do not recurse
+	ld	t2, sys_call_table(t1)		# syscall routine
 
 	move	a0, a1			# shift argument registers
 	move	a1, a2
@@ -198,7 +196,7 @@
 	jr	t2
 	/* Unreached */
 
-einval:	li	v0, -EINVAL
+einval:	li	v0, -ENOSYS
 	jr	ra
 	END(sys32_syscall)
 
@@ -512,7 +510,7 @@
 	PTR	sys_splice
 	PTR	sys32_sync_file_range		/* 4305 */
 	PTR	sys_tee
-	PTR	sys_vmsplice
+	PTR	compat_sys_vmsplice
 	PTR	compat_sys_move_pages
 	PTR	compat_sys_set_robust_list
 	PTR	compat_sys_get_robust_list	/* 4310 */
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 972b2d2..a1b3da6 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1134,7 +1134,7 @@
 
 	/* It's good to be able to run the SP and if it chokes have a look at
 	   the /dev/rt?. But if we reset the pointer to the shared struct we
-	   loose what has happened. So perhaps if garbage is sent to the vpe
+	   lose what has happened. So perhaps if garbage is sent to the vpe
 	   device, use it as a trigger for the reset. Hopefully a nice
 	   executable will be along shortly. */
 	if (ret < 0)
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index cef2db8..32e8478 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -7,9 +7,8 @@
 #
 obj-y				:= malta-amon.o malta-cmdline.o \
 				   malta-display.o malta-init.o malta-int.o \
-				   malta-memory.o malta-mtd.o \
-				   malta-platform.o malta-reset.o \
-				   malta-setup.o malta-time.o
+				   malta-memory.o malta-platform.o \
+				   malta-reset.o malta-setup.o malta-time.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
diff --git a/arch/mips/mti-malta/malta-mtd.c b/arch/mips/mti-malta/malta-mtd.c
deleted file mode 100644
index 8ad9bdf..0000000
--- a/arch/mips/mti-malta/malta-mtd.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 MIPS Technologies, Inc.
- *     written by Ralf Baechle <ralf@linux-mips.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-static struct mtd_partition malta_mtd_partitions[] = {
-	{
-		.name =		"YAMON",
-		.offset =	0x0,
-		.size =		0x100000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"User FS",
-		.offset = 	0x100000,
-		.size =		0x2e0000
-	}, {
-		.name =		"Board Config",
-		.offset =	0x3e0000,
-		.size =		0x020000,
-		.mask_flags =	MTD_WRITEABLE
-	}
-};
-
-static struct physmap_flash_data malta_flash_data = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(malta_mtd_partitions),
-	.parts		= malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
-	.start		= 0x1e000000,
-	.end		= 0x1e3fffff,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &malta_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &malta_flash_resource,
-};
-
-static int __init malta_mtd_init(void)
-{
-	platform_device_register(&malta_flash);
-
-	return 0;
-}
-
-module_init(malta_mtd_init)
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 83b9bab..72e32a7 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -3,10 +3,14 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2006, 07 MIPS Technologies, Inc.
  *   written by Ralf Baechle (ralf@linux-mips.org)
+ *     written by Ralf Baechle <ralf@linux-mips.org>
  *
- * Probe driver for the Malta's UART ports:
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ *   updated by Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * 1. Probe driver for the Malta's UART ports:
  *
  *   o 2 ports in the SMC SuperIO
  *   o 1 port in the CBUS UART, a discrete 16550 which normally is only used
@@ -14,10 +18,17 @@
  *
  * We don't use 8250_platform.c on Malta as it would result in the CBUS
  * UART becoming ttyS0.
+ *
+ * 2. Register RTC-CMOS platform device on Malta.
  */
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/serial_8250.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <mtd/mtd-abi.h>
 
 #define SMC_PORT(base, int)						\
 {									\
@@ -45,21 +56,93 @@
 	{ },
 };
 
-static struct platform_device uart8250_device = {
+static struct platform_device malta_uart8250_device = {
 	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM2,
+	.id			= PLAT8250_DEV_PLATFORM,
 	.dev			= {
 		.platform_data	= uart8250_data,
 	},
 };
 
-static int __init uart8250_init(void)
+struct resource malta_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(7),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device malta_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= malta_rtc_resources,
+	.num_resources	= ARRAY_SIZE(malta_rtc_resources),
+};
+
+static struct mtd_partition malta_mtd_partitions[] = {
+	{
+		.name =		"YAMON",
+		.offset =	0x0,
+		.size =		0x100000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"User FS",
+		.offset = 	0x100000,
+		.size =		0x2e0000
+	}, {
+		.name =		"Board Config",
+		.offset =	0x3e0000,
+		.size =		0x020000,
+		.mask_flags =	MTD_WRITEABLE
+	}
+};
+
+static struct physmap_flash_data malta_flash_data = {
+	.width		= 4,
+	.nr_parts	= ARRAY_SIZE(malta_mtd_partitions),
+	.parts		= malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+	.start		= 0x1e000000,
+	.end		= 0x1e3fffff,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &malta_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &malta_flash_resource,
+};
+
+static struct platform_device *malta_devices[] __initdata = {
+	&malta_uart8250_device,
+	&malta_rtc_device,
+	&malta_flash_device,
+};
+
+static int __init malta_add_devices(void)
 {
-	return platform_device_register(&uart8250_device);
+	int err;
+
+	err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
+	if (err)
+		return err;
+
+	/*
+	 * Set RTC to BCD mode to support current alarm code.
+	 */
+	CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
+
+	return 0;
 }
 
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
+device_initcall(malta_add_devices);
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 9a6d4e8..11584c5 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -99,6 +99,7 @@
  try_again:
 	/* pull chars out of the buffer */
 	ix = gdbstub_rx_outp;
+	barrier();
 	if (ix == gdbstub_rx_inp) {
 		if (nonblock)
 			return -EAGAIN;
@@ -110,6 +111,7 @@
 
 	ch = gdbstub_rx_buffer[ix++];
 	st = gdbstub_rx_buffer[ix++];
+	barrier();
 	gdbstub_rx_outp = ix & 0x00000fff;
 
 	if (st & UART_LSR_BI) {
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 2c9d54a..4bdbaf4 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -91,6 +91,14 @@
 				interrupts = <18 0x8>;
 				interrupt-parent = <&ipic>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		spi@7000 {
@@ -139,14 +147,6 @@
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
-
-			mcu_pio: mcu@a {
-				#gpio-cells = <2>;
-				compatible = "fsl,mc9s08qg8-mpc8349emitx",
-					     "fsl,mcu-mpc8349emitx";
-				reg = <0x0a>;
-				gpio-controller;
-			};
 		};
 
 		usb@22000 {
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e55ff7c..07a674f 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -723,7 +723,7 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 15eb30c..d582014 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -682,7 +682,7 @@
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 1562daf..3a6eaa8 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -75,6 +75,7 @@
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
 		sg->dma_length = sg->length;
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 	}
 
 	return nents;
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
index 68b98a7e..9cf4ae0 100644
--- a/arch/sparc/include/asm/bitops_32.h
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -98,6 +98,7 @@
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/ffs.h>
 #include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/hweight.h>
 #include <asm-generic/bitops/lock.h>
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f43adbc..a941c61 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -1014,7 +1014,7 @@
 		break;
 
 	case PTRACE_SETFPREGS64:
-		ret = copy_regset_to_user(child, view, REGSET_FP,
+		ret = copy_regset_from_user(child, view, REGSET_FP,
 					  0 * sizeof(u64),
 					  33 * sizeof(u64),
 					  fps);
diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c
index 9e05cb5..b956fd7 100644
--- a/arch/sparc64/kernel/visemul.c
+++ b/arch/sparc64/kernel/visemul.c
@@ -131,7 +131,7 @@
 #define VIS_OPF_SHIFT	5
 #define VIS_OPF_MASK	(0x1ff << VIS_OPF_SHIFT)
 
-#define RS1(INSN)	(((INSN) >> 24) & 0x1f)
+#define RS1(INSN)	(((INSN) >> 14) & 0x1f)
 #define RS2(INSN)	(((INSN) >>  0) & 0x1f)
 #define RD(INSN)	(((INSN) >> 25) & 0x1f)
 
@@ -445,7 +445,7 @@
 	unsigned long i;
 
 	rs1 = fpd_regval(f, RS1(insn));
-	rs2 = fpd_regval(f, RS1(insn));
+	rs2 = fpd_regval(f, RS2(insn));
 	rd = fpd_regaddr(f, RD(insn));
 
 	rd_val = *rd;
@@ -807,6 +807,8 @@
 	if (get_user(insn, (u32 __user *) pc))
 		return -EFAULT;
 
+	save_and_clear_fpu();
+
 	opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
 	switch (opf) {
 	default:
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 1a30c04..ac302a2 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -251,13 +251,6 @@
 	/* Pointer to PCI device of this IOMMU */
 	struct pci_dev *dev;
 
-	/*
-	 * Capability pointer. There could be more than one IOMMU per PCI
-	 * device function if there are more than one AMD IOMMU capability
-	 * pointers.
-	 */
-	u16 cap_ptr;
-
 	/* physical address of MMIO space */
 	u64 mmio_phys;
 	/* virtual address of MMIO space */
@@ -266,6 +259,13 @@
 	/* capabilities of that IOMMU read from ACPI */
 	u32 cap;
 
+	/*
+	 * Capability pointer. There could be more than one IOMMU per PCI
+	 * device function if there are more than one AMD IOMMU capability
+	 * pointers.
+	 */
+	u16 cap_ptr;
+
 	/* pci domain of this IOMMU */
 	u16 pci_seg;
 
@@ -284,19 +284,19 @@
 	/* size of command buffer */
 	u32 cmd_buf_size;
 
-	/* event buffer virtual address */
-	u8 *evt_buf;
 	/* size of event buffer */
 	u32 evt_buf_size;
+	/* event buffer virtual address */
+	u8 *evt_buf;
 	/* MSI number for event interrupt */
 	u16 evt_msi_num;
 
-	/* if one, we need to send a completion wait command */
-	int need_sync;
-
 	/* true if interrupts for this IOMMU are already enabled */
 	bool int_enabled;
 
+	/* if one, we need to send a completion wait command */
+	int need_sync;
+
 	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
 };
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 7f225a4..097794f 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -71,15 +71,13 @@
 /* Make sure we keep the same behaviour */
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-#ifdef CONFIG_X86_32
-	return 0;
-#else
+#ifdef CONFIG_X86_64
 	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	if (ops->mapping_error)
 		return ops->mapping_error(dev, dma_addr);
 
-	return (dma_addr == bad_dma_address);
 #endif
+	return (dma_addr == bad_dma_address);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 4850e4b..ff386ff 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -239,7 +239,7 @@
 void set_pci_bus_resources_arch_default(struct pci_bus *b);
 
 #ifdef CONFIG_SMP
-#define mc_capable()			(boot_cpu_data.x86_max_cores > 1)
+#define mc_capable()	(cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids)
 #define smt_capable()			(smp_num_siblings > 1)
 #endif
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index e4899e0..a7b6dec 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -187,6 +187,8 @@
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	ret = __iommu_queue_command(iommu, cmd);
+	if (!ret)
+		iommu->need_sync = 1;
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return ret;
@@ -210,10 +212,13 @@
 	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
 	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
-	iommu->need_sync = 0;
-
 	spin_lock_irqsave(&iommu->lock, flags);
 
+	if (!iommu->need_sync)
+		goto out;
+
+	iommu->need_sync = 0;
+
 	ret = __iommu_queue_command(iommu, &cmd);
 
 	if (ret)
@@ -254,8 +259,6 @@
 
 	ret = iommu_queue_command(iommu, &cmd);
 
-	iommu->need_sync = 1;
-
 	return ret;
 }
 
@@ -281,8 +284,6 @@
 
 	ret = iommu_queue_command(iommu, &cmd);
 
-	iommu->need_sync = 1;
-
 	return ret;
 }
 
@@ -343,7 +344,7 @@
 	u64 __pte, *pte, *page;
 
 	bus_addr  = PAGE_ALIGN(bus_addr);
-	phys_addr = PAGE_ALIGN(bus_addr);
+	phys_addr = PAGE_ALIGN(phys_addr);
 
 	/* only support 512GB address spaces for now */
 	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
@@ -599,7 +600,7 @@
 			continue;
 
 		p2 = IOMMU_PTE_PAGE(p1[i]);
-		for (j = 0; j < 512; ++i) {
+		for (j = 0; j < 512; ++j) {
 			if (!IOMMU_PTE_PRESENT(p2[j]))
 				continue;
 			p3 = IOMMU_PTE_PAGE(p2[j]);
@@ -762,8 +763,6 @@
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
 	iommu_queue_inv_dev_entry(iommu, devid);
-
-	iommu->need_sync = 1;
 }
 
 /*****************************************************************************
@@ -858,6 +857,9 @@
 		print_devid(_bdf, 1);
 	}
 
+	if (domain_for_device(_bdf) == NULL)
+		set_device_domain(*iommu, *domain, _bdf);
+
 	return 1;
 }
 
@@ -908,7 +910,7 @@
 	if (address >= dom->aperture_size)
 		return;
 
-	WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+	WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
 
 	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
 	pte += IOMMU_PTE_L0_INDEX(address);
@@ -920,8 +922,8 @@
 
 /*
  * This function contains common code for mapping of a physically
- * contiguous memory region into DMA address space. It is uses by all
- * mapping functions provided by this IOMMU driver.
+ * contiguous memory region into DMA address space. It is used by all
+ * mapping functions provided with this IOMMU driver.
  * Must be called with the domain lock held.
  */
 static dma_addr_t __map_single(struct device *dev,
@@ -981,7 +983,8 @@
 	dma_addr_t i, start;
 	unsigned int pages;
 
-	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+	if ((dma_addr == bad_dma_address) ||
+	    (dma_addr + size > dma_dom->aperture_size))
 		return;
 
 	pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
@@ -1031,8 +1034,7 @@
 	if (addr == bad_dma_address)
 		goto out;
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1060,8 +1062,7 @@
 
 	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1127,8 +1128,7 @@
 			goto unmap;
 	}
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1173,8 +1173,7 @@
 		s->dma_address = s->dma_length = 0;
 	}
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1225,8 +1224,7 @@
 		goto out;
 	}
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1257,8 +1255,7 @@
 
 	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index f98f4e1..0f4c1fd 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -604,6 +604,9 @@
 		printk(KERN_INFO "Using ACPI for processor (LAPIC) "
 		       "configuration information\n");
 
+	if (!mpf)
+		return;
+
 	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
 	       mpf->mpf_specification);
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
index 0e9f198..95777b0 100644
--- a/arch/x86/kernel/paravirt-spinlocks.c
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -7,7 +7,8 @@
 
 #include <asm/paravirt.h>
 
-static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+static inline void
+default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
 {
 	__raw_spin_lock(lock);
 }
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index a42b02b..ba7ad83 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -123,6 +123,8 @@
 
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
 	iommu_area_free(iommu_gart_bitmap, offset, size);
+	if (offset >= next_bit)
+		next_bit = offset + size;
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
 }
 
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 022cd41..202864a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -401,14 +401,13 @@
 		*cpu_type = "i386/pii";
 		break;
 	case 6 ... 8:
+	case 10 ... 11:
 		*cpu_type = "i386/piii";
 		break;
 	case 9:
+	case 13:
 		*cpu_type = "i386/p6_mobile";
 		break;
-	case 10 ... 13:
-		*cpu_type = "i386/p6";
-		break;
 	case 14:
 		*cpu_type = "i386/core";
 		break;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 716d26f..e9f80c7 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -156,6 +156,8 @@
 	unsigned int low, high;
 	int i;
 
+	if (!reset_value)
+		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			CTRL_READ(low, high, msrs, i);
@@ -171,6 +173,8 @@
 	unsigned int low, high;
 	int i;
 
+	if (!reset_value)
+		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 5c99ff8..6e72d66 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -161,7 +161,7 @@
 	/*
 	 * Prep proxy barrier request.
 	 */
-	blkdev_dequeue_request(rq);
+	elv_dequeue_request(q, rq);
 	q->orig_bar_rq = rq;
 	rq = &q->bar_rq;
 	blk_rq_init(q, rq);
@@ -219,7 +219,7 @@
 			 * This can happen when the queue switches to
 			 * ORDERED_NONE while this request is on it.
 			 */
-			blkdev_dequeue_request(rq);
+			elv_dequeue_request(q, rq);
 			if (__blk_end_request(rq, -EOPNOTSUPP,
 					      blk_rq_bytes(rq)))
 				BUG();
diff --git a/block/blk-core.c b/block/blk-core.c
index 10e8a64..c36aa98 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -592,7 +592,7 @@
 				   1 << QUEUE_FLAG_STACKABLE);
 	q->queue_lock		= lock;
 
-	blk_queue_segment_boundary(q, 0xffffffff);
+	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
 
 	blk_queue_make_request(q, __make_request);
 	blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
@@ -1637,6 +1637,28 @@
 EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
 
 /**
+ * blkdev_dequeue_request - dequeue request and start timeout timer
+ * @req: request to dequeue
+ *
+ * Dequeue @req and start timeout timer on it.  This hands off the
+ * request to the driver.
+ *
+ * Block internal functions which don't want to start timer should
+ * call elv_dequeue_request().
+ */
+void blkdev_dequeue_request(struct request *req)
+{
+	elv_dequeue_request(req->q, req);
+
+	/*
+	 * We are now handing the request to the hardware, add the
+	 * timeout handler.
+	 */
+	blk_add_timer(req);
+}
+EXPORT_SYMBOL(blkdev_dequeue_request);
+
+/**
  * __end_that_request_first - end I/O on a request
  * @req:      the request being processed
  * @error:    %0 for success, < %0 for error
@@ -1774,7 +1796,7 @@
 		blk_queue_end_tag(req->q, req);
 
 	if (blk_queued_rq(req))
-		blkdev_dequeue_request(req);
+		elv_dequeue_request(req->q, req);
 
 	if (unlikely(laptop_mode) && blk_fs_request(req))
 		laptop_io_completion();
diff --git a/block/blk-map.c b/block/blk-map.c
index 0f4b4b8..2990447 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -224,7 +224,7 @@
 		 */
 		bio_get(bio);
 		bio_endio(bio, 0);
-		bio_unmap_user(bio);
+		__blk_rq_unmap_user(bio);
 		return -EINVAL;
 	}
 
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 41392fb..afa55e1 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -125,6 +125,9 @@
 	q->nr_requests = BLKDEV_MAX_RQ;
 	blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
 	blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
+	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
+	blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
+
 	q->make_request_fn = mfn;
 	q->backing_dev_info.ra_pages =
 			(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
@@ -314,6 +317,7 @@
 	/* zero is "infinity" */
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+	t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask);
 
 	t->max_phys_segments = min(t->max_phys_segments, b->max_phys_segments);
 	t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
diff --git a/block/bsg.c b/block/bsg.c
index e8bd247..e73e50d 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -202,6 +202,8 @@
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)
 		rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+	if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+		rq->timeout = BLK_MIN_SG_TIMEOUT;
 
 	return 0;
 }
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 3d3e7a4..67eb93c 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -677,6 +677,29 @@
 	case DVD_WRITE_STRUCT:
 	case DVD_AUTH:
 		arg = (unsigned long)compat_ptr(arg);
+	/* These intepret arg as an unsigned long, not as a pointer,
+	 * so we must not do compat_ptr() conversion. */
+	case HDIO_SET_MULTCOUNT:
+	case HDIO_SET_UNMASKINTR:
+	case HDIO_SET_KEEPSETTINGS:
+	case HDIO_SET_32BIT:
+	case HDIO_SET_NOWERR:
+	case HDIO_SET_DMA:
+	case HDIO_SET_PIO_MODE:
+	case HDIO_SET_NICE:
+	case HDIO_SET_WCACHE:
+	case HDIO_SET_ACOUSTIC:
+	case HDIO_SET_BUSSTATE:
+	case HDIO_SET_ADDRESS:
+	case CDROMEJECT_SW:
+	case CDROM_SET_OPTIONS:
+	case CDROM_CLEAR_OPTIONS:
+	case CDROM_SELECT_SPEED:
+	case CDROM_SELECT_DISC:
+	case CDROM_MEDIA_CHANGED:
+	case CDROM_DRIVE_STATUS:
+	case CDROM_LOCKDOOR:
+	case CDROM_DEBUG:
 		break;
 	default:
 		/* unknown ioctl number */
@@ -699,8 +722,14 @@
 	struct backing_dev_info *bdi;
 	loff_t size;
 
+	/*
+	 * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+	 * to updated it before every ioctl.
+	 */
 	if (file->f_flags & O_NDELAY)
-		mode |= FMODE_NDELAY_NOW;
+		mode |= FMODE_NDELAY;
+	else
+		mode &= ~FMODE_NDELAY;
 
 	switch (cmd) {
 	case HDIO_GETGEO:
diff --git a/block/elevator.c b/block/elevator.c
index 9ac82dd..a6951f7 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -844,14 +844,7 @@
 	 */
 	if (blk_account_rq(rq))
 		q->in_flight++;
-
-	/*
-	 * We are now handing the request to the hardware, add the
-	 * timeout handler.
-	 */
-	blk_add_timer(rq);
 }
-EXPORT_SYMBOL(elv_dequeue_request);
 
 int elv_queue_empty(struct request_queue *q)
 {
diff --git a/block/genhd.c b/block/genhd.c
index 27549e4..2f7feda 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1102,6 +1102,7 @@
 			kfree(disk);
 			return NULL;
 		}
+		disk->node_id = node_id;
 		if (disk_expand_part_tbl(disk, 0)) {
 			free_part_stats(&disk->part0);
 			kfree(disk);
@@ -1116,7 +1117,6 @@
 		device_initialize(disk_to_dev(disk));
 		INIT_WORK(&disk->async_notify,
 			media_change_notify_thread);
-		disk->node_id = node_id;
 	}
 	return disk;
 }
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5963cf9..d0bb92c 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -208,6 +208,8 @@
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)
 		rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+	if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+		rq->timeout = BLK_MIN_SG_TIMEOUT;
 
 	return 0;
 }
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index a0a178d..1423b0c 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -174,15 +174,6 @@
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		val->intval = battery->current_now * 1000;
-		/* if power units are mW, convert to mA by
-		   dividing by current voltage (mV/1000) */
-		if (!battery->power_unit) {
-			if (battery->voltage_now) {
-				val->intval /= battery->voltage_now;
-				val->intval *= 1000;
-			} else
-				val->intval = -1;
-		}
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index f20bf35..edda7b6 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2790,7 +2790,7 @@
 	return 0;
 
 out_mem:
-	blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+	blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
 	/* This is safe: open() is still holding a reference. */
 	module_put(THIS_MODULE);
 	return ret;
@@ -2975,7 +2975,7 @@
 	pkt_debugfs_dev_remove(pd);
 	pkt_sysfs_dev_remove(pd);
 
-	blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+	blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
 
 	remove_proc_entry(pd->name, pkt_proc);
 	DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 3b23270..a8f15e6 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -418,7 +418,7 @@
 							     TTY_OVERRUN);
 					/*
 					   If the flip buffer itself is
-					   overflowing, we still loose
+					   overflowing, we still lose
 					   the next incoming character.
 					 */
 					if (tty_buffer_request_room(tty, 1) !=
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0a4f39b..adc972c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -244,6 +244,10 @@
 		 * List of objects currently involved in rendering from the
 		 * ringbuffer.
 		 *
+		 * Includes buffers having the contents of their GPU caches
+		 * flushed, not necessarily primitives.  last_rendering_seqno
+		 * represents when the rendering involved will be completed.
+		 *
 		 * A reference is held on the buffer while on this list.
 		 */
 		struct list_head active_list;
@@ -253,6 +257,8 @@
 		 * still have a write_domain which needs to be flushed before
 		 * unbinding.
 		 *
+		 * last_rendering_seqno is 0 while an object is in this list.
+		 *
 		 * A reference is held on the buffer while on this list.
 		 */
 		struct list_head flushing_list;
@@ -261,6 +267,8 @@
 		 * LRU list of objects which are not in the ringbuffer and
 		 * are ready to unbind, but are still in the GTT.
 		 *
+		 * last_rendering_seqno is 0 while an object is in this list.
+		 *
 		 * A reference is not held on the buffer while on this list,
 		 * as merely being GTT-bound shouldn't prevent its being
 		 * freed, and we'll pull it off the list in the free path.
@@ -371,8 +379,8 @@
 	uint32_t agp_type;
 
 	/**
-	 * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when
-	 * GEM_DOMAIN_CPU is not in the object's read domain.
+	 * If present, while GEM_DOMAIN_CPU is in the read domain this array
+	 * flags which individual pages are valid.
 	 */
 	uint8_t *page_cpu_valid;
 };
@@ -394,9 +402,6 @@
 	/** Time at which this request was emitted, in jiffies. */
 	unsigned long emitted_jiffies;
 
-	/** Cache domains that were flushed at the start of the request. */
-	uint32_t flush_domains;
-
 	struct list_head list;
 };
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index d58ddef..3fde82b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -33,21 +33,21 @@
 
 #define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
 
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
-			    uint32_t read_domains,
-			    uint32_t write_domain);
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
-				 uint64_t offset,
-				 uint64_t size,
-				 uint32_t read_domains,
-				 uint32_t write_domain);
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
-		    struct drm_file *file_priv,
-		    uint32_t read_domains,
-		    uint32_t write_domain);
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+				  uint32_t read_domains,
+				  uint32_t write_domain);
+static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
+static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+					     int write);
+static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
+					     int write);
+static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+						     uint64_t offset,
+						     uint64_t size);
+static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
 static int i915_gem_object_get_page_list(struct drm_gem_object *obj);
 static void i915_gem_object_free_page_list(struct drm_gem_object *obj);
 static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
@@ -162,8 +162,8 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_set_domain_range(obj, args->offset, args->size,
-					       I915_GEM_DOMAIN_CPU, 0);
+	ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
+							args->size);
 	if (ret != 0) {
 		drm_gem_object_unreference(obj);
 		mutex_unlock(&dev->struct_mutex);
@@ -260,8 +260,7 @@
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
-	ret = i915_gem_set_domain(obj, file_priv,
-				  I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+	ret = i915_gem_object_set_to_gtt_domain(obj, 1);
 	if (ret)
 		goto fail;
 
@@ -320,8 +319,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_set_domain(obj, file_priv,
-				  I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
+	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
 	if (ret) {
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
@@ -397,7 +395,8 @@
 }
 
 /**
- * Called when user space prepares to use an object
+ * Called when user space prepares to use an object with the CPU, either
+ * through the mmap ioctl's mapping or a GTT mapping.
  */
 int
 i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
@@ -405,11 +404,26 @@
 {
 	struct drm_i915_gem_set_domain *args = data;
 	struct drm_gem_object *obj;
+	uint32_t read_domains = args->read_domains;
+	uint32_t write_domain = args->write_domain;
 	int ret;
 
 	if (!(dev->driver->driver_features & DRIVER_GEM))
 		return -ENODEV;
 
+	/* Only handle setting domains to types used by the CPU. */
+	if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+		return -EINVAL;
+
+	if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+		return -EINVAL;
+
+	/* Having something in the write domain implies it's in the read
+	 * domain, and only that read domain.  Enforce that in the request.
+	 */
+	if (write_domain != 0 && read_domains != write_domain)
+		return -EINVAL;
+
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL)
 		return -EBADF;
@@ -417,10 +431,21 @@
 	mutex_lock(&dev->struct_mutex);
 #if WATCH_BUF
 	DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
-		 obj, obj->size, args->read_domains, args->write_domain);
+		 obj, obj->size, read_domains, write_domain);
 #endif
-	ret = i915_gem_set_domain(obj, file_priv,
-				  args->read_domains, args->write_domain);
+	if (read_domains & I915_GEM_DOMAIN_GTT) {
+		ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+
+		/* Silently promote "you're not bound, there was nothing to do"
+		 * to success, since the client was just asking us to
+		 * make sure everything was done.
+		 */
+		if (ret == -EINVAL)
+			ret = 0;
+	} else {
+		ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
+	}
+
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
 	return ret;
@@ -455,10 +480,9 @@
 	obj_priv = obj->driver_private;
 
 	/* Pinned buffers may be scanout, so flush the cache */
-	if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) {
-		i915_gem_clflush_object(obj);
-		drm_agp_chipset_flush(dev);
-	}
+	if (obj_priv->pin_count)
+		i915_gem_object_flush_cpu_write_domain(obj);
+
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
 	return ret;
@@ -532,7 +556,7 @@
 }
 
 static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
 {
 	struct drm_device *dev = obj->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -546,8 +570,20 @@
 	/* Move from whatever list we were on to the tail of execution. */
 	list_move_tail(&obj_priv->list,
 		       &dev_priv->mm.active_list);
+	obj_priv->last_rendering_seqno = seqno;
 }
 
+static void
+i915_gem_object_move_to_flushing(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	BUG_ON(!obj_priv->active);
+	list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list);
+	obj_priv->last_rendering_seqno = 0;
+}
 
 static void
 i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
@@ -562,6 +598,7 @@
 	else
 		list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
 
+	obj_priv->last_rendering_seqno = 0;
 	if (obj_priv->active) {
 		obj_priv->active = 0;
 		drm_gem_object_unreference(obj);
@@ -610,10 +647,28 @@
 
 	request->seqno = seqno;
 	request->emitted_jiffies = jiffies;
-	request->flush_domains = flush_domains;
 	was_empty = list_empty(&dev_priv->mm.request_list);
 	list_add_tail(&request->list, &dev_priv->mm.request_list);
 
+	/* Associate any objects on the flushing list matching the write
+	 * domain we're flushing with our flush.
+	 */
+	if (flush_domains != 0) {
+		struct drm_i915_gem_object *obj_priv, *next;
+
+		list_for_each_entry_safe(obj_priv, next,
+					 &dev_priv->mm.flushing_list, list) {
+			struct drm_gem_object *obj = obj_priv->obj;
+
+			if ((obj->write_domain & flush_domains) ==
+			    obj->write_domain) {
+				obj->write_domain = 0;
+				i915_gem_object_move_to_active(obj, seqno);
+			}
+		}
+
+	}
+
 	if (was_empty && !dev_priv->mm.suspended)
 		schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
 	return seqno;
@@ -676,30 +731,10 @@
 			 __func__, request->seqno, obj);
 #endif
 
-		if (obj->write_domain != 0) {
-			list_move_tail(&obj_priv->list,
-				       &dev_priv->mm.flushing_list);
-		} else {
+		if (obj->write_domain != 0)
+			i915_gem_object_move_to_flushing(obj);
+		else
 			i915_gem_object_move_to_inactive(obj);
-		}
-	}
-
-	if (request->flush_domains != 0) {
-		struct drm_i915_gem_object *obj_priv, *next;
-
-		/* Clear the write domain and activity from any buffers
-		 * that are just waiting for a flush matching the one retired.
-		 */
-		list_for_each_entry_safe(obj_priv, next,
-					 &dev_priv->mm.flushing_list, list) {
-			struct drm_gem_object *obj = obj_priv->obj;
-
-			if (obj->write_domain & request->flush_domains) {
-				obj->write_domain = 0;
-				i915_gem_object_move_to_inactive(obj);
-			}
-		}
-
 	}
 }
 
@@ -892,25 +927,10 @@
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int ret;
 
-	/* If there are writes queued to the buffer, flush and
-	 * create a new seqno to wait for.
+	/* This function only exists to support waiting for existing rendering,
+	 * not for emitting required flushes.
 	 */
-	if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) {
-		uint32_t write_domain = obj->write_domain;
-#if WATCH_BUF
-		DRM_INFO("%s: flushing object %p from write domain %08x\n",
-			  __func__, obj, write_domain);
-#endif
-		i915_gem_flush(dev, 0, write_domain);
-
-		i915_gem_object_move_to_active(obj);
-		obj_priv->last_rendering_seqno = i915_add_request(dev,
-								  write_domain);
-		BUG_ON(obj_priv->last_rendering_seqno == 0);
-#if WATCH_LRU
-		DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj);
-#endif
-	}
+	BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0);
 
 	/* If there is rendering queued on the buffer being evicted, wait for
 	 * it.
@@ -950,24 +970,16 @@
 		return -EINVAL;
 	}
 
-	/* Wait for any rendering to complete
-	 */
-	ret = i915_gem_object_wait_rendering(obj);
-	if (ret) {
-		DRM_ERROR("wait_rendering failed: %d\n", ret);
-		return ret;
-	}
-
 	/* Move the object to the CPU domain to ensure that
 	 * any possible CPU writes while it's not in the GTT
 	 * are flushed when we go to remap it. This will
 	 * also ensure that all pending GPU writes are finished
 	 * before we unbind.
 	 */
-	ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU,
-					 I915_GEM_DOMAIN_CPU);
+	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
 	if (ret) {
-		DRM_ERROR("set_domain failed: %d\n", ret);
+		if (ret != -ERESTARTSYS)
+			DRM_ERROR("set_domain failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1083,6 +1095,19 @@
 }
 
 static int
+i915_gem_evict_everything(struct drm_device *dev)
+{
+	int ret;
+
+	for (;;) {
+		ret = i915_gem_evict_something(dev);
+		if (ret != 0)
+			break;
+	}
+	return ret;
+}
+
+static int
 i915_gem_object_get_page_list(struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -1168,7 +1193,8 @@
 
 		ret = i915_gem_evict_something(dev);
 		if (ret != 0) {
-			DRM_ERROR("Failed to evict a buffer %d\n", ret);
+			if (ret != -ERESTARTSYS)
+				DRM_ERROR("Failed to evict a buffer %d\n", ret);
 			return ret;
 		}
 		goto search_free;
@@ -1228,6 +1254,143 @@
 	drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE);
 }
 
+/** Flushes any GPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	uint32_t seqno;
+
+	if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
+		return;
+
+	/* Queue the GPU write cache flushing we need. */
+	i915_gem_flush(dev, 0, obj->write_domain);
+	seqno = i915_add_request(dev, obj->write_domain);
+	obj->write_domain = 0;
+	i915_gem_object_move_to_active(obj, seqno);
+}
+
+/** Flushes the GTT write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
+{
+	if (obj->write_domain != I915_GEM_DOMAIN_GTT)
+		return;
+
+	/* No actual flushing is required for the GTT write domain.   Writes
+	 * to it immediately go to main memory as far as we know, so there's
+	 * no chipset flush.  It also doesn't land in render cache.
+	 */
+	obj->write_domain = 0;
+}
+
+/** Flushes the CPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+
+	if (obj->write_domain != I915_GEM_DOMAIN_CPU)
+		return;
+
+	i915_gem_clflush_object(obj);
+	drm_agp_chipset_flush(dev);
+	obj->write_domain = 0;
+}
+
+/**
+ * Moves a single object to the GTT read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int ret;
+
+	/* Not valid to be called on unbound objects. */
+	if (obj_priv->gtt_space == NULL)
+		return -EINVAL;
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+	/* Wait on any GPU rendering and flushing to occur. */
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret != 0)
+		return ret;
+
+	/* If we're writing through the GTT domain, then CPU and GPU caches
+	 * will need to be invalidated at next use.
+	 */
+	if (write)
+		obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+	i915_gem_object_flush_cpu_write_domain(obj);
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->read_domains |= I915_GEM_DOMAIN_GTT;
+	if (write) {
+		obj->write_domain = I915_GEM_DOMAIN_GTT;
+		obj_priv->dirty = 1;
+	}
+
+	return 0;
+}
+
+/**
+ * Moves a single object to the CPU read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
+{
+	struct drm_device *dev = obj->dev;
+	int ret;
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+	/* Wait on any GPU rendering and flushing to occur. */
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret != 0)
+		return ret;
+
+	i915_gem_object_flush_gtt_write_domain(obj);
+
+	/* If we have a partially-valid cache of the object in the CPU,
+	 * finish invalidating it and free the per-page flags.
+	 */
+	i915_gem_object_set_to_full_cpu_read_domain(obj);
+
+	/* Flush the CPU cache if it's still invalid. */
+	if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
+		i915_gem_clflush_object(obj);
+		drm_agp_chipset_flush(dev);
+
+		obj->read_domains |= I915_GEM_DOMAIN_CPU;
+	}
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+	/* If we're writing through the CPU, then the GPU read domains will
+	 * need to be invalidated at next use.
+	 */
+	if (write) {
+		obj->read_domains &= I915_GEM_DOMAIN_CPU;
+		obj->write_domain = I915_GEM_DOMAIN_CPU;
+	}
+
+	return 0;
+}
+
 /*
  * Set the next domain for the specified object. This
  * may not actually perform the necessary flushing/invaliding though,
@@ -1339,16 +1502,18 @@
  *		MI_FLUSH
  *		drm_agp_chipset_flush
  */
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
-			    uint32_t read_domains,
-			    uint32_t write_domain)
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+				  uint32_t read_domains,
+				  uint32_t write_domain)
 {
 	struct drm_device		*dev = obj->dev;
 	struct drm_i915_gem_object	*obj_priv = obj->driver_private;
 	uint32_t			invalidate_domains = 0;
 	uint32_t			flush_domains = 0;
-	int				ret;
+
+	BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
+	BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
 
 #if WATCH_BUF
 	DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
@@ -1385,34 +1550,11 @@
 		DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
 			 __func__, flush_domains, invalidate_domains);
 #endif
-		/*
-		 * If we're invaliding the CPU cache and flushing a GPU cache,
-		 * then pause for rendering so that the GPU caches will be
-		 * flushed before the cpu cache is invalidated
-		 */
-		if ((invalidate_domains & I915_GEM_DOMAIN_CPU) &&
-		    (flush_domains & ~(I915_GEM_DOMAIN_CPU |
-				       I915_GEM_DOMAIN_GTT))) {
-			ret = i915_gem_object_wait_rendering(obj);
-			if (ret)
-				return ret;
-		}
 		i915_gem_clflush_object(obj);
 	}
 
 	if ((write_domain | flush_domains) != 0)
 		obj->write_domain = write_domain;
-
-	/* If we're invalidating the CPU domain, clear the per-page CPU
-	 * domain list as well.
-	 */
-	if (obj_priv->page_cpu_valid != NULL &&
-	    (write_domain != 0 ||
-	     read_domains & I915_GEM_DOMAIN_CPU)) {
-		drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
-			 DRM_MEM_DRIVER);
-		obj_priv->page_cpu_valid = NULL;
-	}
 	obj->read_domains = read_domains;
 
 	dev->invalidate_domains |= invalidate_domains;
@@ -1423,47 +1565,94 @@
 		 obj->read_domains, obj->write_domain,
 		 dev->invalidate_domains, dev->flush_domains);
 #endif
-	return 0;
 }
 
 /**
- * Set the read/write domain on a range of the object.
+ * Moves the object from a partially CPU read to a full one.
  *
- * Currently only implemented for CPU reads, otherwise drops to normal
- * i915_gem_object_set_domain().
+ * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
+ * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
+ */
+static void
+i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	if (!obj_priv->page_cpu_valid)
+		return;
+
+	/* If we're partially in the CPU read domain, finish moving it in.
+	 */
+	if (obj->read_domains & I915_GEM_DOMAIN_CPU) {
+		int i;
+
+		for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) {
+			if (obj_priv->page_cpu_valid[i])
+				continue;
+			drm_clflush_pages(obj_priv->page_list + i, 1);
+		}
+		drm_agp_chipset_flush(dev);
+	}
+
+	/* Free the page_cpu_valid mappings which are now stale, whether
+	 * or not we've got I915_GEM_DOMAIN_CPU.
+	 */
+	drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
+		 DRM_MEM_DRIVER);
+	obj_priv->page_cpu_valid = NULL;
+}
+
+/**
+ * Set the CPU read domain on a range of the object.
+ *
+ * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
+ * not entirely valid.  The page_cpu_valid member of the object flags which
+ * pages have been flushed, and will be respected by
+ * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
+ * of the whole object.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
  */
 static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
-				 uint64_t offset,
-				 uint64_t size,
-				 uint32_t read_domains,
-				 uint32_t write_domain)
+i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+					  uint64_t offset, uint64_t size)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
-	int ret, i;
+	int i, ret;
 
-	if (obj->read_domains & I915_GEM_DOMAIN_CPU)
+	if (offset == 0 && size == obj->size)
+		return i915_gem_object_set_to_cpu_domain(obj, 0);
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+	/* Wait on any GPU rendering and flushing to occur. */
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret != 0)
+		return ret;
+	i915_gem_object_flush_gtt_write_domain(obj);
+
+	/* If we're already fully in the CPU read domain, we're done. */
+	if (obj_priv->page_cpu_valid == NULL &&
+	    (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0)
 		return 0;
 
-	if (read_domains != I915_GEM_DOMAIN_CPU ||
-	    write_domain != 0)
-		return i915_gem_object_set_domain(obj,
-						  read_domains, write_domain);
-
-	/* Wait on any GPU rendering to the object to be flushed. */
-	ret = i915_gem_object_wait_rendering(obj);
-	if (ret)
-		return ret;
-
+	/* Otherwise, create/clear the per-page CPU read domain flag if we're
+	 * newly adding I915_GEM_DOMAIN_CPU
+	 */
 	if (obj_priv->page_cpu_valid == NULL) {
 		obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
 						      DRM_MEM_DRIVER);
-	}
+		if (obj_priv->page_cpu_valid == NULL)
+			return -ENOMEM;
+	} else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0)
+		memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE);
 
 	/* Flush the cache on any pages that are still invalid from the CPU's
 	 * perspective.
 	 */
-	for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) {
+	for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
+	     i++) {
 		if (obj_priv->page_cpu_valid[i])
 			continue;
 
@@ -1472,39 +1661,14 @@
 		obj_priv->page_cpu_valid[i] = 1;
 	}
 
-	return 0;
-}
-
-/**
- * Once all of the objects have been set in the proper domain,
- * perform the necessary flush and invalidate operations.
- *
- * Returns the write domains flushed, for use in flush tracking.
- */
-static uint32_t
-i915_gem_dev_set_domain(struct drm_device *dev)
-{
-	uint32_t flush_domains = dev->flush_domains;
-
-	/*
-	 * Now that all the buffers are synced to the proper domains,
-	 * flush and invalidate the collected domains
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
 	 */
-	if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
-		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
-			  __func__,
-			 dev->invalidate_domains,
-			 dev->flush_domains);
-#endif
-		i915_gem_flush(dev,
-			       dev->invalidate_domains,
-			       dev->flush_domains);
-		dev->invalidate_domains = 0;
-		dev->flush_domains = 0;
-	}
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
 
-	return flush_domains;
+	obj->read_domains |= I915_GEM_DOMAIN_CPU;
+
+	return 0;
 }
 
 /**
@@ -1585,6 +1749,18 @@
 			return -EINVAL;
 		}
 
+		if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
+		    reloc.read_domains & I915_GEM_DOMAIN_CPU) {
+			DRM_ERROR("reloc with read/write CPU domains: "
+				  "obj %p target %d offset %d "
+				  "read %08x write %08x",
+				  obj, reloc.target_handle,
+				  (int) reloc.offset,
+				  reloc.read_domains,
+				  reloc.write_domain);
+			return -EINVAL;
+		}
+
 		if (reloc.write_domain && target_obj->pending_write_domain &&
 		    reloc.write_domain != target_obj->pending_write_domain) {
 			DRM_ERROR("Write domain conflict: "
@@ -1625,19 +1801,11 @@
 			continue;
 		}
 
-		/* Now that we're going to actually write some data in,
-		 * make sure that any rendering using this buffer's contents
-		 * is completed.
-		 */
-		i915_gem_object_wait_rendering(obj);
-
-		/* As we're writing through the gtt, flush
-		 * any CPU writes before we write the relocations
-		 */
-		if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
-			i915_gem_clflush_object(obj);
-			drm_agp_chipset_flush(dev);
-			obj->write_domain = 0;
+		ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+		if (ret != 0) {
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return -EINVAL;
 		}
 
 		/* Map the page containing the relocation we're going to
@@ -1779,6 +1947,7 @@
 	int ret, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains;
+	int pin_tries;
 
 #if WATCH_EXEC
 	DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
@@ -1827,14 +1996,7 @@
 		return -EBUSY;
 	}
 
-	/* Zero the gloabl flush/invalidate flags. These
-	 * will be modified as each object is bound to the
-	 * gtt
-	 */
-	dev->invalidate_domains = 0;
-	dev->flush_domains = 0;
-
-	/* Look up object handles and perform the relocations */
+	/* Look up object handles */
 	for (i = 0; i < args->buffer_count; i++) {
 		object_list[i] = drm_gem_object_lookup(dev, file_priv,
 						       exec_list[i].handle);
@@ -1844,17 +2006,39 @@
 			ret = -EBADF;
 			goto err;
 		}
+	}
 
-		object_list[i]->pending_read_domains = 0;
-		object_list[i]->pending_write_domain = 0;
-		ret = i915_gem_object_pin_and_relocate(object_list[i],
-						       file_priv,
-						       &exec_list[i]);
-		if (ret) {
-			DRM_ERROR("object bind and relocate failed %d\n", ret);
+	/* Pin and relocate */
+	for (pin_tries = 0; ; pin_tries++) {
+		ret = 0;
+		for (i = 0; i < args->buffer_count; i++) {
+			object_list[i]->pending_read_domains = 0;
+			object_list[i]->pending_write_domain = 0;
+			ret = i915_gem_object_pin_and_relocate(object_list[i],
+							       file_priv,
+							       &exec_list[i]);
+			if (ret)
+				break;
+			pinned = i + 1;
+		}
+		/* success */
+		if (ret == 0)
+			break;
+
+		/* error other than GTT full, or we've already tried again */
+		if (ret != -ENOMEM || pin_tries >= 1) {
+			DRM_ERROR("Failed to pin buffers %d\n", ret);
 			goto err;
 		}
-		pinned = i + 1;
+
+		/* unpin all of our buffers */
+		for (i = 0; i < pinned; i++)
+			i915_gem_object_unpin(object_list[i]);
+
+		/* evict everyone we can from the aperture */
+		ret = i915_gem_evict_everything(dev);
+		if (ret)
+			goto err;
 	}
 
 	/* Set the pending read domains for the batch buffer to COMMAND */
@@ -1864,21 +2048,37 @@
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
+	/* Zero the global flush/invalidate flags. These
+	 * will be modified as new domains are computed
+	 * for each object
+	 */
+	dev->invalidate_domains = 0;
+	dev->flush_domains = 0;
+
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
 
-		/* make sure all previous memory operations have passed */
-		ret = i915_gem_object_set_domain(obj,
-						 obj->pending_read_domains,
-						 obj->pending_write_domain);
-		if (ret)
-			goto err;
+		/* Compute new gpu domains and update invalidate/flush */
+		i915_gem_object_set_to_gpu_domain(obj,
+						  obj->pending_read_domains,
+						  obj->pending_write_domain);
 	}
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
-	/* Flush/invalidate caches and chipset buffer */
-	flush_domains = i915_gem_dev_set_domain(dev);
+	if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+			  __func__,
+			 dev->invalidate_domains,
+			 dev->flush_domains);
+#endif
+		i915_gem_flush(dev,
+			       dev->invalidate_domains,
+			       dev->flush_domains);
+		if (dev->flush_domains)
+			(void)i915_add_request(dev, dev->flush_domains);
+	}
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
@@ -1898,8 +2098,6 @@
 			      ~0);
 #endif
 
-	(void)i915_add_request(dev, flush_domains);
-
 	/* Exec the batchbuffer */
 	ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset);
 	if (ret) {
@@ -1927,10 +2125,8 @@
 	i915_file_priv->mm.last_gem_seqno = seqno;
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
-		struct drm_i915_gem_object *obj_priv = obj->driver_private;
 
-		i915_gem_object_move_to_active(obj);
-		obj_priv->last_rendering_seqno = seqno;
+		i915_gem_object_move_to_active(obj, seqno);
 #if WATCH_LRU
 		DRM_INFO("%s: move to exec list %p\n", __func__, obj);
 #endif
@@ -2061,11 +2257,7 @@
 	/* XXX - flush the CPU caches for pinned objects
 	 * as the X server doesn't manage domains yet
 	 */
-	if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
-		i915_gem_clflush_object(obj);
-		drm_agp_chipset_flush(dev);
-		obj->write_domain = 0;
-	}
+	i915_gem_object_flush_cpu_write_domain(obj);
 	args->offset = obj_priv->gtt_offset;
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
@@ -2167,29 +2359,6 @@
 	drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
 }
 
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
-		    struct drm_file *file_priv,
-		    uint32_t read_domains,
-		    uint32_t write_domain)
-{
-	struct drm_device *dev = obj->dev;
-	int ret;
-	uint32_t flush_domains;
-
-	BUG_ON(!mutex_is_locked(&dev->struct_mutex));
-
-	ret = i915_gem_object_set_domain(obj, read_domains, write_domain);
-	if (ret)
-		return ret;
-	flush_domains = i915_gem_dev_set_domain(obj->dev);
-
-	if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT))
-		(void) i915_add_request(dev, flush_domains);
-
-	return 0;
-}
-
 /** Unbinds all objects that are on the given buffer list. */
 static int
 i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c
index 93de15b..e8d5abe 100644
--- a/drivers/gpu/drm/i915/i915_gem_proc.c
+++ b/drivers/gpu/drm/i915/i915_gem_proc.c
@@ -166,10 +166,9 @@
 	list_for_each_entry(gem_request, &dev_priv->mm.request_list,
 			    list)
 	{
-		DRM_PROC_PRINT("    %d @ %d %08x\n",
+		DRM_PROC_PRINT("    %d @ %d\n",
 			       gem_request->seqno,
-			       (int) (jiffies - gem_request->emitted_jiffies),
-			       gem_request->flush_domains);
+			       (int) (jiffies - gem_request->emitted_jiffies));
 	}
 	if (len > request + offset)
 		return request;
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index e8b85ac..a8cb694 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -119,9 +119,10 @@
 			    dcc & DCC_CHANNEL_XOR_DISABLE) {
 				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
 				swizzle_y = I915_BIT_6_SWIZZLE_9;
-			} else if (IS_I965GM(dev) || IS_GM45(dev)) {
-				/* GM965 only does bit 11-based channel
-				 * randomization
+			} else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
+				   (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+				/* GM965/GM45 does either bit 11 or bit 17
+				 * swizzling.
 				 */
 				swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
 				swizzle_y = I915_BIT_6_SWIZZLE_9_11;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0e476eb..9d24aae 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -522,6 +522,7 @@
 #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED	(2 << 0)
 #define DCC_ADDRESSING_MODE_MASK			(3 << 0)
 #define DCC_CHANNEL_XOR_DISABLE				(1 << 10)
+#define DCC_CHANNEL_XOR_BIT_17				(1 << 9)
 
 /** 965 MCH register controlling DRAM channel configuration */
 #define C0DRB3			0x10206
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6d74017..e6857e0 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -669,10 +669,12 @@
 
 endif
 
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
 config BLK_DEV_IDE_PMAC
 	tristate "PowerMac on-board IDE support"
 	depends on PPC_PMAC && IDE=y
 	select IDE_TIMINGS
+	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver provides support for the on-board IDE controller on
 	  most of the recent Apple Power Macintoshes and PowerBooks.
@@ -689,16 +691,6 @@
 	  CD-ROM on hda. This option changes this to more natural hda for
 	  hard disk and hdc for CD-ROM.
 
-config BLK_DEV_IDEDMA_PMAC
-	bool "PowerMac IDE DMA support"
-	depends on BLK_DEV_IDE_PMAC
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This option allows the driver for the on-board IDE controller on
-	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
-	  to transfer data to and from memory.  Saying Y is safe and improves
-	  performance.
-
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200
@@ -912,7 +904,7 @@
 endif
 
 config BLK_DEV_IDEDMA
-	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+	def_bool BLK_DEV_IDEDMA_SFF || \
 		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 
 endif # IDE
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7d275b2..cc35d6d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -208,8 +208,10 @@
 		 */
 		if (drive->hwif->dma_ops == NULL)
 			break;
-		if (drive->dev_flags & IDE_DFLAG_USING_DMA)
-			ide_set_dma(drive);
+		/*
+		 * TODO: respect IDE_DFLAG_USING_DMA
+		 */
+		ide_set_dma(drive);
 		break;
 	}
 
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 2e19d62..7c481bb 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -66,7 +66,6 @@
 	struct macio_dev		*mdev;
 	u32				timings[4];
 	volatile u32 __iomem *		*kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	/* Those fields are duplicating what is in hwif. We currently
 	 * can't use the hwif ones because of some assumptions that are
 	 * beeing done by the generic code about the kind of dma controller
@@ -74,8 +73,6 @@
 	 */
 	volatile struct dbdma_regs __iomem *	dma_regs;
 	struct dbdma_cmd*		dma_table_cpu;
-#endif
-	
 } pmac_ide_hwif_t;
 
 enum {
@@ -222,8 +219,6 @@
 #define KAUAI_FCR_UATA_RESET_N		0x00000002
 #define KAUAI_FCR_UATA_ENABLE		0x00000001
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /* Rounded Multiword DMA timings
  * 
  * I gave up finding a generic formula for all controller
@@ -413,8 +408,6 @@
 static void pmac_ide_selectproc(ide_drive_t *drive);
 static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
 
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
 #define PMAC_IDE_REG(x) \
 	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
 
@@ -584,8 +577,6 @@
 	pmac_ide_do_update_timings(drive);
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * Calculate KeyLargo ATA/66 UDMA timings
  */
@@ -786,7 +777,6 @@
 		drive->name, speed & 0xf,  *timings);
 #endif	
 }
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
@@ -804,7 +794,6 @@
 	tl[0] = *timings;
 	tl[1] = *timings2;
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	if (speed >= XFER_UDMA_0) {
 		if (pmif->kind == controller_kl_ata4)
 			ret = set_timings_udma_ata4(&tl[0], speed);
@@ -817,7 +806,7 @@
 			ret = -1;
 	} else
 		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
 	if (ret)
 		return;
 
@@ -1008,9 +997,7 @@
 	.chipset		= ide_pmac,
 	.tp_ops			= &pmac_tp_ops,
 	.port_ops		= &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	.dma_ops		= &pmac_dma_ops,
-#endif
 	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
 				  IDE_HFLAG_POST_SET_MODE |
 				  IDE_HFLAG_MMIO |
@@ -1182,7 +1169,7 @@
 	pmif->regbase = regbase;
 	pmif->irq = irq;
 	pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
 	if (macio_resource_count(mdev) >= 2) {
 		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
 			printk(KERN_WARNING "ide-pmac: can't request DMA "
@@ -1192,7 +1179,7 @@
 			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
 	} else
 		pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
 	dev_set_drvdata(&mdev->ofdev.dev, pmif);
 
 	memset(&hw, 0, sizeof(hw));
@@ -1300,9 +1287,7 @@
 
 	base = ioremap(rbase, rlen);
 	pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 	pmif->kauai_fcr = base;
 	pmif->irq = pdev->irq;
 
@@ -1434,8 +1419,6 @@
 	return error;
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * pmac_ide_build_dmatable builds the DBDMA command list
  * for a transfer and sets the DBDMA channel to point to it.
@@ -1723,13 +1706,6 @@
 
 	return 0;
 }
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
-				       const struct ide_port_info *d)
-{
-	return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 module_init(pmac_ide_probe);
 
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a63161a..04e5fd7 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -668,7 +668,7 @@
 	if (!rs->max_segment_size)
 		rs->max_segment_size = MAX_SEGMENT_SIZE;
 	if (!rs->seg_boundary_mask)
-		rs->seg_boundary_mask = -1;
+		rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
 	if (!rs->bounce_pfn)
 		rs->bounce_pfn = -1;
 }
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 84bdc2e..a443e13 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -354,7 +354,7 @@
  *	@req: the request to prepare
  *
  *	Allocate the necessary i2o_block_request struct and connect it to
- *	the request. This is needed that we not loose the SG list later on.
+ *	the request. This is needed that we not lose the SG list later on.
  *
  *	Returns BLKPREP_OK on success or BLKPREP_DEFER on failure.
  */
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index be2b592..6e53a30 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -49,7 +49,6 @@
 /**
  *	i2o_msg_get_wait - obtain an I2O message from the IOP
  *	@c: I2O controller
- *	@msg: pointer to a I2O message pointer
  *	@wait: how long to wait until timeout
  *
  *	This function waits up to wait seconds for a message slot to be
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c9e1242..5081b39 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -757,7 +757,7 @@
 	 * access to the device is prohibited.
 	 */
 	error = scsi_nonblockable_ioctl(sdp, cmd, p,
-					(mode & FMODE_NDELAY_NOW) != 0);
+					(mode & FMODE_NDELAY) != 0);
 	if (!scsi_block_when_processing_errors(sdp) || !error)
 		return error;
 
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 62b6633..45b66b9 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -521,7 +521,7 @@
 	 * if it doesn't recognise the ioctl
 	 */
 	ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
-					(mode & FMODE_NDELAY_NOW) != 0);
+					(mode & FMODE_NDELAY) != 0);
 	if (ret != -ENODEV)
 		return ret;
 	return scsi_ioctl(sdev, cmd, argp);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 6117d3d..28c00c3 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -591,8 +591,8 @@
 	/* Update the per-port timeout */
 	uart_update_timeout(port, new->c_cflag, baud);
 
-	/* Do our best to flush TX & RX, so we don't loose anything */
-	/* But we don't wait indefinitly ! */
+	/* Do our best to flush TX & RX, so we don't lose anything */
+	/* But we don't wait indefinitely ! */
 	j = 5000000;	/* Maximum wait */
 	/* FIXME Can't receive chars since set_termios might be called at early
 	 * boot for the console, all stuff is not yet ready to receive at that
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 51d7bde..aad1359 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1498,7 +1498,7 @@
 			priv->interface, buf, 0, WDR_TIMEOUT);
 
 	/* Termios defaults are set by usb_serial_init. We don't change
-	   port->tty->termios - this would loose speed settings, etc.
+	   port->tty->termios - this would lose speed settings, etc.
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 26173a2..5b395a4 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -392,7 +392,7 @@
 
 	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
 	val32 = inl(SMI_EN);
-	val32 &= 0x00002000;
+	val32 |= 0x00002000;
 	outl(val32, SMI_EN);
 
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
diff --git a/fs/block_dev.c b/fs/block_dev.c
index db831ef..99e0ae1 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1135,12 +1135,15 @@
 	if (res)
 		return res;
 
-	if (!(filp->f_mode & FMODE_EXCL))
-		return 0;
+	if (filp->f_mode & FMODE_EXCL) {
+		res = bd_claim(bdev, filp);
+		if (res)
+			goto out_blkdev_put;
+	}
 
-	if (!(res = bd_claim(bdev, filp)))
-		return 0;
+	return 0;
 
+ out_blkdev_put:
 	blkdev_put(bdev, filp->f_mode);
 	return res;
 }
@@ -1203,8 +1206,16 @@
 {
 	struct block_device *bdev = I_BDEV(file->f_mapping->host);
 	fmode_t mode = file->f_mode;
+
+	/*
+	 * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+	 * to updated it before every ioctl.
+	 */
 	if (file->f_flags & O_NDELAY)
-		mode |= FMODE_NDELAY_NOW;
+		mode |= FMODE_NDELAY;
+	else
+		mode &= ~FMODE_NDELAY;
+
 	return blkdev_ioctl(bdev, mode, cmd, arg);
 }
 
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 80246ba..890e018 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -367,6 +367,8 @@
 	 * Try to get any dentry for the given file handle from the filesystem.
 	 */
 	result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
+	if (!result)
+		result = ERR_PTR(-ESTALE);
 	if (IS_ERR(result))
 		return result;
 
@@ -420,6 +422,8 @@
 
 		target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
 				fh_len, fileid_type);
+		if (!target_dir)
+			goto err_result;
 		err = PTR_ERR(target_dir);
 		if (IS_ERR(target_dir))
 			goto err_result;
diff --git a/fs/fcntl.c b/fs/fcntl.c
index ac4f7db..549daf8 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,6 +19,7 @@
 #include <linux/signal.h>
 #include <linux/rcupdate.h>
 #include <linux/pid_namespace.h>
+#include <linux/smp_lock.h>
 
 #include <asm/poll.h>
 #include <asm/siginfo.h>
@@ -175,6 +176,11 @@
 	if (error)
 		return error;
 
+	/*
+	 * We still need a lock here for now to keep multiple FASYNC calls
+	 * from racing with each other.
+	 */
+	lock_kernel();
 	if ((arg ^ filp->f_flags) & FASYNC) {
 		if (filp->f_op && filp->f_op->fasync) {
 			error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0);
@@ -185,6 +191,7 @@
 
 	filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK);
  out:
+	unlock_kernel();
 	return error;
 }
 
diff --git a/fs/ioctl.c b/fs/ioctl.c
index d152856..43e8b2c 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -400,11 +400,9 @@
 
 	/* Did FASYNC state change ? */
 	if ((flag ^ filp->f_flags) & FASYNC) {
-		if (filp->f_op && filp->f_op->fasync) {
-			lock_kernel();
+		if (filp->f_op && filp->f_op->fasync)
 			error = filp->f_op->fasync(fd, filp, on);
-			unlock_kernel();
-		} else
+		else
 			error = -ENOTTY;
 	}
 	if (error)
@@ -440,11 +438,17 @@
 		break;
 
 	case FIONBIO:
+		/* BKL needed to avoid races tweaking f_flags */
+		lock_kernel();
 		error = ioctl_fionbio(filp, argp);
+		unlock_kernel();
 		break;
 
 	case FIOASYNC:
+		/* BKL needed to avoid races tweaking f_flags */
+		lock_kernel();
 		error = ioctl_fioasync(fd, filp, argp);
+		unlock_kernel();
 		break;
 
 	case FIOQSIZE:
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 9fd8889..70fc63a 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -167,7 +167,8 @@
 			continue;
 		if (host->h_server != ni->server)
 			continue;
-		if (!nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
+		if (ni->server &&
+		    !nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
 			continue;
 
 		/* Move to head of hash chain. */
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index c631a83..56b07673 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -181,6 +181,7 @@
 	}
 	flush_signals(current);
 	cancel_delayed_work_sync(&grace_period_end);
+	locks_end_grace(&lockd_manager);
 	if (nlmsvc_ops)
 		nlmsvc_invalidate_all();
 	nlm_shutdown_hosts();
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index bb93946..b79ec93 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -225,12 +225,12 @@
 		return 0;
 
 	nfs4_save_user(&uid, &gid);
+	INIT_LIST_HEAD(dentries);
 
 	filp = dentry_open(dget(dir), mntget(rec_dir.mnt), O_RDONLY);
 	status = PTR_ERR(filp);
 	if (IS_ERR(filp))
 		goto out;
-	INIT_LIST_HEAD(dentries);
 	status = vfs_readdir(filp, nfsd4_build_dentrylist, &dla);
 	fput(filp);
 	while (!list_empty(dentries)) {
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index b0bebc5..1a052ac 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3261,6 +3261,7 @@
 {
 	cancel_rearming_delayed_workqueue(laundry_wq, &laundromat_work);
 	destroy_workqueue(laundry_wq);
+	locks_end_grace(&nfsd4_manager);
 	nfs4_lock_state();
 	nfs4_release_reclaim();
 	__nfs4_state_shutdown();
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d700dac..c903130 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -212,7 +212,7 @@
 	if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
 		     (target_dp->i_d.di_projid != src_ip->i_d.di_projid))) {
 		error = XFS_ERROR(EXDEV);
-		xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED);
+		xfs_rename_unlock4(inodes, XFS_ILOCK_EXCL);
 		xfs_trans_cancel(tp, cancel_flags);
 		goto std_return;
 	}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index a135256..031a315 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -662,6 +662,7 @@
  * default timeout for SG_IO if none specified
  */
 #define BLK_DEFAULT_SG_TIMEOUT	(60 * HZ)
+#define BLK_MIN_SG_TIMEOUT	(7 * HZ)
 
 #ifdef CONFIG_BOUNCE
 extern int init_emergency_isa_pool(void);
@@ -786,6 +787,8 @@
 		blk_run_backing_dev(mapping->backing_dev_info, NULL);
 }
 
+extern void blkdev_dequeue_request(struct request *req);
+
 /*
  * blk_end_request() and friends.
  * __blk_end_request() and end_request() must be called with
@@ -820,11 +823,6 @@
 extern unsigned int blk_rq_bytes(struct request *rq);
 extern unsigned int blk_rq_cur_bytes(struct request *rq);
 
-static inline void blkdev_dequeue_request(struct request *req)
-{
-	elv_dequeue_request(req->q, req);
-}
-
 /*
  * Access functions for manipulating queue properties
  */
@@ -921,6 +919,8 @@
 
 #define MAX_SEGMENT_SIZE	65536
 
+#define BLK_SEG_BOUNDARY_MASK	0xFFFFFFFFUL
+
 #define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
 
 static inline int queue_hardsect_size(struct request_queue *q)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0dcdd94..4a853ef 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -63,23 +63,24 @@
 #define MAY_ACCESS 16
 #define MAY_OPEN 32
 
-#define FMODE_READ ((__force fmode_t)1)
-#define FMODE_WRITE ((__force fmode_t)2)
-
-/* Internal kernel extensions */
-#define FMODE_LSEEK	((__force fmode_t)4)
-#define FMODE_PREAD	((__force fmode_t)8)
-#define FMODE_PWRITE	FMODE_PREAD	/* These go hand in hand */
-
-/* File is being opened for execution. Primary users of this flag are
-   distributed filesystems that can use it to achieve correct ETXTBUSY
-   behavior for cross-node execution/opening_for_writing of files */
-#define FMODE_EXEC	((__force fmode_t)16)
-
-#define FMODE_NDELAY	((__force fmode_t)32)
-#define FMODE_EXCL	((__force fmode_t)64)
+/* file is open for reading */
+#define FMODE_READ		((__force fmode_t)1)
+/* file is open for writing */
+#define FMODE_WRITE		((__force fmode_t)2)
+/* file is seekable */
+#define FMODE_LSEEK		((__force fmode_t)4)
+/* file can be accessed using pread/pwrite */
+#define FMODE_PREAD		((__force fmode_t)8)
+#define FMODE_PWRITE		FMODE_PREAD	/* These go hand in hand */
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC		((__force fmode_t)16)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY		((__force fmode_t)32)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL		((__force fmode_t)64)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+   (specialy hack for floppy.c) */
 #define FMODE_WRITE_IOCTL	((__force fmode_t)128)
-#define FMODE_NDELAY_NOW	((__force fmode_t)256)
 
 #define RW_MASK		1
 #define RWA_MASK	2
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 895337b..4e5288a 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -311,7 +311,7 @@
 	struct task_cputime cputime;
 
 	thread_group_cputime(p, &cputime);
-	switch (which_clock) {
+	switch (CPUCLOCK_WHICH(which_clock)) {
 	default:
 		return -EINVAL;
 	case CPUCLOCK_PROF:
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index b7713b5..6da1435 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -633,7 +633,7 @@
 		return;
 	}
 
-	blkdev_put(resume_bdev, mode); /* move up */
+	blkdev_put(resume_bdev, mode);
 }
 
 static int swsusp_header_init(void)
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 3953e4a..dc0b3be 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -188,7 +188,7 @@
 	if ((long)(now - t->last_switch_timestamp) <
 					sysctl_hung_task_timeout_secs)
 		return;
-	if (sysctl_hung_task_warnings < 0)
+	if (!sysctl_hung_task_warnings)
 		return;
 	sysctl_hung_task_warnings--;
 
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e7acfb4..fa05e88 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -518,6 +518,28 @@
 	/* correct the clock when NTP error is too big */
 	clocksource_adjust(offset);
 
+	/*
+	 * Since in the loop above, we accumulate any amount of time
+	 * in xtime_nsec over a second into xtime.tv_sec, its possible for
+	 * xtime_nsec to be fairly small after the loop. Further, if we're
+	 * slightly speeding the clocksource up in clocksource_adjust(),
+	 * its possible the required corrective factor to xtime_nsec could
+	 * cause it to underflow.
+	 *
+	 * Now, we cannot simply roll the accumulated second back, since
+	 * the NTP subsystem has been notified via second_overflow. So
+	 * instead we push xtime_nsec forward by the amount we underflowed,
+	 * and add that amount into the error.
+	 *
+	 * We'll correct this error next time through this function, when
+	 * xtime_nsec is not as small.
+	 */
+	if (unlikely((s64)clock->xtime_nsec < 0)) {
+		s64 neg = -(s64)clock->xtime_nsec;
+		clock->xtime_nsec = 0;
+		clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+	}
+
 	/* store full nanoseconds into xtime after rounding it up and
 	 * add the remainder to the error difference.
 	 */
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 95293f5..a1951dc 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1183,7 +1183,11 @@
 	else if (so->state > SS_UNCONNECTED)
 		err = -EISCONN;
 	else {
-		svsk = svc_setup_socket(serv, so, &err, SVC_SOCK_DEFAULTS);
+		if (!try_module_get(THIS_MODULE))
+			err = -ENOENT;
+		else
+			svsk = svc_setup_socket(serv, so, &err,
+						SVC_SOCK_DEFAULTS);
 		if (svsk) {
 			struct sockaddr_storage addr;
 			struct sockaddr *sin = (struct sockaddr *)&addr;
@@ -1196,7 +1200,8 @@
 			spin_unlock_bh(&serv->sv_lock);
 			svc_xprt_received(&svsk->sk_xprt);
 			err = 0;
-		}
+		} else
+			module_put(THIS_MODULE);
 	}
 	if (err) {
 		sockfd_put(so);