| /* |
| * This header file contains global constant/enum definitions, |
| * global variable declaration. |
| */ |
| #ifndef _LBS_DEFS_H_ |
| #define _LBS_DEFS_H_ |
| |
| #include <linux/spinlock.h> |
| |
| #ifdef CONFIG_LIBERTAS_DEBUG |
| #define DEBUG |
| #define PROC_DEBUG |
| #endif |
| |
| #ifndef DRV_NAME |
| #define DRV_NAME "libertas" |
| #endif |
| |
| |
| #define LBS_DEB_ENTER 0x00000001 |
| #define LBS_DEB_LEAVE 0x00000002 |
| #define LBS_DEB_MAIN 0x00000004 |
| #define LBS_DEB_NET 0x00000008 |
| #define LBS_DEB_MESH 0x00000010 |
| #define LBS_DEB_WEXT 0x00000020 |
| #define LBS_DEB_IOCTL 0x00000040 |
| #define LBS_DEB_SCAN 0x00000080 |
| #define LBS_DEB_ASSOC 0x00000100 |
| #define LBS_DEB_JOIN 0x00000200 |
| #define LBS_DEB_11D 0x00000400 |
| #define LBS_DEB_DEBUGFS 0x00000800 |
| #define LBS_DEB_ETHTOOL 0x00001000 |
| #define LBS_DEB_HOST 0x00002000 |
| #define LBS_DEB_CMD 0x00004000 |
| #define LBS_DEB_RX 0x00008000 |
| #define LBS_DEB_TX 0x00010000 |
| #define LBS_DEB_USB 0x00020000 |
| #define LBS_DEB_CS 0x00040000 |
| #define LBS_DEB_FW 0x00080000 |
| #define LBS_DEB_THREAD 0x00100000 |
| #define LBS_DEB_HEX 0x00200000 |
| #define LBS_DEB_SDIO 0x00400000 |
| #define LBS_DEB_SYSFS 0x00800000 |
| #define LBS_DEB_SPI 0x01000000 |
| #define LBS_DEB_CFG80211 0x02000000 |
| |
| extern unsigned int lbs_debug; |
| |
| #ifdef DEBUG |
| #define LBS_DEB_LL(grp, grpnam, fmt, args...) \ |
| do { if ((lbs_debug & (grp)) == (grp)) \ |
| printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \ |
| in_interrupt() ? " (INT)" : "", ## args); } while (0) |
| #else |
| #define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0) |
| #endif |
| |
| #define lbs_deb_enter(grp) \ |
| LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__); |
| #define lbs_deb_enter_args(grp, fmt, args...) \ |
| LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args); |
| #define lbs_deb_leave(grp) \ |
| LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__); |
| #define lbs_deb_leave_args(grp, fmt, args...) \ |
| LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \ |
| __func__, ##args); |
| #define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args) |
| #define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args) |
| #define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args) |
| #define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args) |
| #define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args) |
| #define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args) |
| #define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args) |
| #define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args) |
| #define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args) |
| #define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args) |
| #define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args) |
| #define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args) |
| #define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args) |
| #define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args) |
| #define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args) |
| #define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args) |
| #define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args) |
| #define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args) |
| #define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args) |
| #define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args) |
| #define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args) |
| #define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args) |
| #define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args) |
| #define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args) |
| |
| #ifdef DEBUG |
| static inline void lbs_deb_hex(unsigned int grp, const char *prompt, |
| const u8 *buf, int len) |
| { |
| int i = 0; |
| |
| if (len && |
| (lbs_debug & LBS_DEB_HEX) && |
| (lbs_debug & grp)) |
| { |
| for (i = 1; i <= len; i++) { |
| if ((i & 0xf) == 1) { |
| if (i != 1) |
| printk("\n"); |
| printk(DRV_NAME " %s: ", prompt); |
| } |
| printk("%02x ", (u8) * buf); |
| buf++; |
| } |
| printk("\n"); |
| } |
| } |
| #else |
| #define lbs_deb_hex(grp,prompt,buf,len) do {} while (0) |
| #endif |
| |
| |
| |
| /* Buffer Constants */ |
| |
| /* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical |
| * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas |
| * driver has more local TxPDs. Each TxPD on the host memory is associated |
| * with a Tx control node. The driver maintains 8 RxPD descriptors for |
| * station firmware to store Rx packet information. |
| * |
| * Current version of MAC has a 32x6 multicast address buffer. |
| * |
| * 802.11b can have up to 14 channels, the driver keeps the |
| * BSSID(MAC address) of each APs or Ad hoc stations it has sensed. |
| */ |
| |
| #define MRVDRV_MAX_MULTICAST_LIST_SIZE 32 |
| #define LBS_NUM_CMD_BUFFERS 10 |
| #define LBS_CMD_BUFFER_SIZE (2 * 1024) |
| #define MRVDRV_MAX_CHANNEL_SIZE 14 |
| #define MRVDRV_ASSOCIATION_TIME_OUT 255 |
| #define MRVDRV_SNAP_HEADER_LEN 8 |
| |
| #define LBS_UPLD_SIZE 2312 |
| #define DEV_NAME_LEN 32 |
| |
| /* Wake criteria for HOST_SLEEP_CFG command */ |
| #define EHS_WAKE_ON_BROADCAST_DATA 0x0001 |
| #define EHS_WAKE_ON_UNICAST_DATA 0x0002 |
| #define EHS_WAKE_ON_MAC_EVENT 0x0004 |
| #define EHS_WAKE_ON_MULTICAST_DATA 0x0008 |
| #define EHS_REMOVE_WAKEUP 0xFFFFFFFF |
| /* Wake rules for Host_Sleep_CFG command */ |
| #define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00 |
| #define WOL_RULE_NET_TYPE_MESH 0x10 |
| #define WOL_RULE_ADDR_TYPE_BCAST 0x01 |
| #define WOL_RULE_ADDR_TYPE_MCAST 0x08 |
| #define WOL_RULE_ADDR_TYPE_UCAST 0x02 |
| #define WOL_RULE_OP_AND 0x01 |
| #define WOL_RULE_OP_OR 0x02 |
| #define WOL_RULE_OP_INVALID 0xFF |
| #define WOL_RESULT_VALID_CMD 0 |
| #define WOL_RESULT_NOSPC_ERR 1 |
| #define WOL_RESULT_EEXIST_ERR 2 |
| |
| /* Misc constants */ |
| /* This section defines 802.11 specific contants */ |
| |
| #define MRVDRV_MAX_BSS_DESCRIPTS 16 |
| #define MRVDRV_MAX_REGION_CODE 6 |
| |
| #define MRVDRV_DEFAULT_LISTEN_INTERVAL 10 |
| |
| #define MRVDRV_CHANNELS_PER_SCAN 4 |
| #define MRVDRV_MAX_CHANNELS_PER_SCAN 14 |
| |
| #define MRVDRV_MIN_BEACON_INTERVAL 20 |
| #define MRVDRV_MAX_BEACON_INTERVAL 1000 |
| #define MRVDRV_BEACON_INTERVAL 100 |
| |
| #define MARVELL_MESH_IE_LENGTH 9 |
| |
| /* |
| * Values used to populate the struct mrvl_mesh_ie. The only time you need this |
| * is when enabling the mesh using CMD_MESH_CONFIG. |
| */ |
| #define MARVELL_MESH_IE_TYPE 4 |
| #define MARVELL_MESH_IE_SUBTYPE 0 |
| #define MARVELL_MESH_IE_VERSION 0 |
| #define MARVELL_MESH_PROTO_ID_HWMP 0 |
| #define MARVELL_MESH_METRIC_ID 0 |
| #define MARVELL_MESH_CAPABILITY 0 |
| |
| /* INT status Bit Definition */ |
| #define MRVDRV_TX_DNLD_RDY 0x0001 |
| #define MRVDRV_RX_UPLD_RDY 0x0002 |
| #define MRVDRV_CMD_DNLD_RDY 0x0004 |
| #define MRVDRV_CMD_UPLD_RDY 0x0008 |
| #define MRVDRV_CARDEVENT 0x0010 |
| |
| /* Automatic TX control default levels */ |
| #define POW_ADAPT_DEFAULT_P0 13 |
| #define POW_ADAPT_DEFAULT_P1 15 |
| #define POW_ADAPT_DEFAULT_P2 18 |
| #define TPC_DEFAULT_P0 5 |
| #define TPC_DEFAULT_P1 10 |
| #define TPC_DEFAULT_P2 13 |
| |
| /* TxPD status */ |
| |
| /* |
| * Station firmware use TxPD status field to report final Tx transmit |
| * result, Bit masks are used to present combined situations. |
| */ |
| |
| #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01 |
| #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08 |
| |
| /* Tx mesh flag */ |
| /* |
| * Currently we are using normal WDS flag as mesh flag. |
| * TODO: change to proper mesh flag when MAC understands it. |
| */ |
| #define TxPD_CONTROL_WDS_FRAME (1<<17) |
| #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME |
| |
| /* Mesh interface ID */ |
| #define MESH_IFACE_ID 0x0001 |
| /* Mesh id should be in bits 14-13-12 */ |
| #define MESH_IFACE_BIT_OFFSET 0x000c |
| /* Mesh enable bit in FW capability */ |
| #define MESH_CAPINFO_ENABLE_MASK (1<<16) |
| |
| /* FW definition from Marvell v4 */ |
| #define MRVL_FW_V4 (0x04) |
| /* FW definition from Marvell v5 */ |
| #define MRVL_FW_V5 (0x05) |
| /* FW definition from Marvell v10 */ |
| #define MRVL_FW_V10 (0x0a) |
| /* FW major revision definition */ |
| #define MRVL_FW_MAJOR_REV(x) ((x)>>24) |
| |
| /* RxPD status */ |
| |
| #define MRVDRV_RXPD_STATUS_OK 0x0001 |
| |
| /* RxPD status - Received packet types */ |
| /* Rx mesh flag */ |
| /* |
| * Currently we are using normal WDS flag as mesh flag. |
| * TODO: change to proper mesh flag when MAC understands it. |
| */ |
| #define RxPD_CONTROL_WDS_FRAME (0x40) |
| #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME |
| |
| /* RSSI-related defines */ |
| /* |
| * RSSI constants are used to implement 802.11 RSSI threshold |
| * indication. if the Rx packet signal got too weak for 5 consecutive |
| * times, miniport driver (driver) will report this event to wrapper |
| */ |
| |
| #define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96) |
| |
| /* RTS/FRAG related defines */ |
| #define MRVDRV_RTS_MIN_VALUE 0 |
| #define MRVDRV_RTS_MAX_VALUE 2347 |
| #define MRVDRV_FRAG_MIN_VALUE 256 |
| #define MRVDRV_FRAG_MAX_VALUE 2346 |
| |
| /* This is for firmware specific length */ |
| #define EXTRA_LEN 36 |
| |
| #define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \ |
| (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN) |
| |
| #define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \ |
| (ETH_FRAME_LEN + sizeof(struct rxpd) \ |
| + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN) |
| |
| #define CMD_F_HOSTCMD (1 << 0) |
| #define FW_CAPINFO_WPA (1 << 0) |
| #define FW_CAPINFO_PS (1 << 1) |
| #define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13) |
| #define FW_CAPINFO_BOOT2_UPGRADE (1<<14) |
| #define FW_CAPINFO_PERSISTENT_CONFIG (1<<15) |
| |
| #define KEY_LEN_WPA_AES 16 |
| #define KEY_LEN_WPA_TKIP 32 |
| #define KEY_LEN_WEP_104 13 |
| #define KEY_LEN_WEP_40 5 |
| |
| #define RF_ANTENNA_1 0x1 |
| #define RF_ANTENNA_2 0x2 |
| #define RF_ANTENNA_AUTO 0xFFFF |
| |
| #define BAND_B (0x01) |
| #define BAND_G (0x02) |
| #define ALL_802_11_BANDS (BAND_B | BAND_G) |
| |
| #define MAX_RATES 14 |
| |
| #define MAX_LEDS 8 |
| |
| /* Global Variable Declaration */ |
| extern const char lbs_driver_version[]; |
| extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE]; |
| |
| |
| /* ENUM definition */ |
| /* SNRNF_TYPE */ |
| enum SNRNF_TYPE { |
| TYPE_BEACON = 0, |
| TYPE_RXPD, |
| MAX_TYPE_B |
| }; |
| |
| /* SNRNF_DATA */ |
| enum SNRNF_DATA { |
| TYPE_NOAVG = 0, |
| TYPE_AVG, |
| MAX_TYPE_AVG |
| }; |
| |
| /* LBS_802_11_POWER_MODE */ |
| enum LBS_802_11_POWER_MODE { |
| LBS802_11POWERMODECAM, |
| LBS802_11POWERMODEMAX_PSP, |
| LBS802_11POWERMODEFAST_PSP, |
| /* not a real mode, defined as an upper bound */ |
| LBS802_11POWEMODEMAX |
| }; |
| |
| /* PS_STATE */ |
| enum PS_STATE { |
| PS_STATE_FULL_POWER, |
| PS_STATE_AWAKE, |
| PS_STATE_PRE_SLEEP, |
| PS_STATE_SLEEP |
| }; |
| |
| /* DNLD_STATE */ |
| enum DNLD_STATE { |
| DNLD_RES_RECEIVED, |
| DNLD_DATA_SENT, |
| DNLD_CMD_SENT, |
| DNLD_BOOTCMD_SENT, |
| }; |
| |
| /* LBS_MEDIA_STATE */ |
| enum LBS_MEDIA_STATE { |
| LBS_CONNECTED, |
| LBS_DISCONNECTED |
| }; |
| |
| /* LBS_802_11_PRIVACY_FILTER */ |
| enum LBS_802_11_PRIVACY_FILTER { |
| LBS802_11PRIVFILTERACCEPTALL, |
| LBS802_11PRIVFILTER8021XWEP |
| }; |
| |
| /* mv_ms_type */ |
| enum mv_ms_type { |
| MVMS_DAT = 0, |
| MVMS_CMD = 1, |
| MVMS_TXDONE = 2, |
| MVMS_EVENT |
| }; |
| |
| /* KEY_TYPE_ID */ |
| enum KEY_TYPE_ID { |
| KEY_TYPE_ID_WEP = 0, |
| KEY_TYPE_ID_TKIP, |
| KEY_TYPE_ID_AES |
| }; |
| |
| /* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */ |
| enum KEY_INFO_WPA { |
| KEY_INFO_WPA_MCAST = 0x01, |
| KEY_INFO_WPA_UNICAST = 0x02, |
| KEY_INFO_WPA_ENABLED = 0x04 |
| }; |
| |
| /* Default values for fwt commands. */ |
| #define FWT_DEFAULT_METRIC 0 |
| #define FWT_DEFAULT_DIR 1 |
| /* Default Rate, 11Mbps */ |
| #define FWT_DEFAULT_RATE 3 |
| #define FWT_DEFAULT_SSN 0xffffffff |
| #define FWT_DEFAULT_DSN 0 |
| #define FWT_DEFAULT_HOPCOUNT 0 |
| #define FWT_DEFAULT_TTL 0 |
| #define FWT_DEFAULT_EXPIRATION 0 |
| #define FWT_DEFAULT_SLEEPMODE 0 |
| #define FWT_DEFAULT_SNR 0 |
| |
| #endif |