dsa: add support for the Marvell 88E6095/6095F switch chips
Add support for the Marvell 88E6095/6095F switch chips. These
chips are similar to the 88e6131, so we can add the support to
mv88e6131.c easily.
Thanks to Gary Thomas <gary@mlbassoc.com> and Jesper Dangaard
Brouer <hawk@diku.dk> for testing various patches.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 49211b3..c51b554 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -41,13 +41,13 @@
default n
config NET_DSA_MV88E6131
- bool "Marvell 88E6131 ethernet switch chip support"
+ bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
select NET_DSA_MV88E6XXX
select NET_DSA_MV88E6XXX_NEED_PPU
select NET_DSA_TAG_DSA
---help---
- This enables support for the Marvell 88E6131 ethernet switch
- chip.
+ This enables support for the Marvell 88E6095/6095F/6131
+ ethernet switch chips.
config NET_DSA_MV88E6123_61_65
bool "Marvell 88E6123/6161/6165 ethernet switch chip support"
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
index 70fae24..0029957 100644
--- a/net/dsa/mv88e6131.c
+++ b/net/dsa/mv88e6131.c
@@ -1,6 +1,6 @@
/*
- * net/dsa/mv88e6131.c - Marvell 88e6131 switch chip support
- * Copyright (c) 2008 Marvell Semiconductor
+ * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,6 +21,8 @@
ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
if (ret >= 0) {
ret &= 0xfff0;
+ if (ret == 0x0950)
+ return "Marvell 88E6095/88E6095F";
if (ret == 0x1060)
return "Marvell 88E6131";
}
@@ -36,7 +38,7 @@
/*
* Set all ports to the disabled state.
*/
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < 11; i++) {
ret = REG_READ(REG_PORT(i), 0x04);
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
}
@@ -136,7 +138,7 @@
* Clear all trunk masks.
*/
for (i = 0; i < 8; i++)
- REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
/*
* Clear all trunk mappings.
@@ -159,9 +161,13 @@
/*
* MAC Forcing register: don't force link, speed, duplex
- * or flow control state to any particular values.
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port to 1000 Mb/s full duplex.
*/
- REG_WRITE(addr, 0x01, 0x0003);
+ if (p == ds->cpu_port)
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
/*
* Port Control: disable Core Tag, disable Drop-on-Lock,
@@ -268,7 +274,7 @@
if (ret < 0)
return ret;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 11; i++) {
ret = mv88e6131_setup_port(ds, i);
if (ret < 0)
return ret;
@@ -279,7 +285,7 @@
static int mv88e6131_port_to_phy_addr(int port)
{
- if (port >= 0 && port != 3 && port <= 7)
+ if (port >= 0 && port <= 11)
return port;
return -1;
}
