Fix misc .c/.h comment typos
Fix various .c/.h typos in comments (no code changes).
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index b79f45f..a11f4e6 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -2000,7 +2000,7 @@
* The host accesses this scratch in a different manner from the
* central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
* and CMnSCRPAGE to access the scratch memory. A flat mapping of the
- * scratch memory is avaliable for software convenience and to prevent
+ * scratch memory is available for software convenience and to prevent
* corruption while the sequencer is running. This memory is mapped
* onto addresses 800h - BFFh, total of 400h bytes.
*
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
index de7c04d..e5a0ec3 100644
--- a/drivers/scsi/aic94xx/aic94xx_sds.c
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -64,7 +64,7 @@
#define OCM_INIT_DIR_ENTRIES 5
/***************************************************************************
-* OCM dircetory default
+* OCM directory default
***************************************************************************/
static struct asd_ocm_dir OCMDirInit =
{
@@ -73,7 +73,7 @@
};
/***************************************************************************
-* OCM dircetory Entries default
+* OCM directory Entries default
***************************************************************************/
static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] =
{
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 6cc2bc2..adb8eb4 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -185,7 +185,7 @@
** power of 2 cache line size.
** Enhanced in linux-2.3.44 to provide a memory pool
** per pcidev to support dynamic dma mapping. (I would
-** have preferred a real bus astraction, btw).
+** have preferred a real bus abstraction, btw).
**
**==========================================================
*/
@@ -1438,7 +1438,7 @@
** The first four bytes (scr_st[4]) are used inside the script by
** "COPY" commands.
** Because source and destination must have the same alignment
-** in a DWORD, the fields HAVE to be at the choosen offsets.
+** in a DWORD, the fields HAVE to be at the chosen offsets.
** xerr_st 0 (0x34) scratcha
** sync_st 1 (0x05) sxfer
** wide_st 3 (0x03) scntl3
@@ -1498,7 +1498,7 @@
** the DSA (data structure address) register points
** to this substructure of the ccb.
** This substructure contains the header with
-** the script-processor-changable data and
+** the script-processor-changeable data and
** data blocks for the indirect move commands.
**
**----------------------------------------------------------
@@ -5107,7 +5107,7 @@
/*
** This CCB has been skipped by the NCR.
-** Queue it in the correponding unit queue.
+** Queue it in the corresponding unit queue.
*/
static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp)
{
@@ -5896,8 +5896,8 @@
**
** In normal cases, interrupt conditions occur one at a
** time. The ncr is able to stack in some extra registers
-** other interrupts that will occurs after the first one.
-** But severall interrupts may occur at the same time.
+** other interrupts that will occur after the first one.
+** But, several interrupts may occur at the same time.
**
** We probably should only try to deal with the normal
** case, but it seems that multiple interrupts occur in
@@ -6796,7 +6796,7 @@
** The host status field is set to HS_NEGOTIATE to mark this
** situation.
**
-** If the target doesn't answer this message immidiately
+** If the target doesn't answer this message immediately
** (as required by the standard), the SIR_NEGO_FAIL interrupt
** will be raised eventually.
** The handler removes the HS_NEGOTIATE status, and sets the
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index cb8b770..b39357d 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -218,7 +218,7 @@
** Same as option 1, but also deal with
** misconfigured interrupts.
**
-** - Edge triggerred instead of level sensitive.
+** - Edge triggered instead of level sensitive.
** - No interrupt line connected.
** - IRQ number misconfigured.
**
@@ -549,7 +549,7 @@
/*
** Initial setup.
-** Can be overriden at startup by a command line.
+** Can be overridden at startup by a command line.
*/
#define SCSI_NCR_DRIVER_SETUP \
{ \
@@ -1093,7 +1093,7 @@
**-----------------------------------------------------------
** On 810A, 860, 825A, 875, 895 and 896 chips the content
** of SFBR register can be used as data (SCR_SFBR_DATA).
-** The 896 has additionnal IO registers starting at
+** The 896 has additional IO registers starting at
** offset 0x80. Bit 7 of register offset is stored in
** bit 7 of the SCRIPTS instruction first DWORD.
**-----------------------------------------------------------
