| # SPDX-License-Identifier: GPL-2.0 |
| config PPC_47x |
| bool "Support for 47x variant" |
| depends on 44x |
| default n |
| select MPIC |
| help |
| This option enables support for the 47x family of processors and is |
| not currently compatible with other 44x or 46x varients |
| |
| config BAMBOO |
| bool "Bamboo" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440EP |
| select PCI |
| help |
| This option enables support for the IBM PPC440EP evaluation board. |
| |
| config BLUESTONE |
| bool "Bluestone" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select APM821xx |
| select PCI_MSI |
| select PPC4xx_MSI |
| select PPC4xx_PCI_EXPRESS |
| select IBM_EMAC_RGMII if IBM_EMAC |
| help |
| This option enables support for the APM APM821xx Evaluation board. |
| |
| config EBONY |
| bool "Ebony" |
| depends on 44x |
| default y |
| select 440GP |
| select PCI |
| select OF_RTC |
| help |
| This option enables support for the IBM PPC440GP evaluation board. |
| |
| config SAM440EP |
| bool "Sam440ep" |
| depends on 44x |
| default n |
| select 440EP |
| select PCI |
| help |
| This option enables support for the ACube Sam440ep board. |
| |
| config SEQUOIA |
| bool "Sequoia" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440EPX |
| help |
| This option enables support for the AMCC PPC440EPX evaluation board. |
| |
| config TAISHAN |
| bool "Taishan" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440GX |
| select PCI |
| help |
| This option enables support for the AMCC PPC440GX "Taishan" |
| evaluation board. |
| |
| config KATMAI |
| bool "Katmai" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440SPe |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| select PCI_MSI |
| select PPC4xx_MSI |
| help |
| This option enables support for the AMCC PPC440SPe evaluation board. |
| |
| config RAINIER |
| bool "Rainier" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440GRX |
| select PCI |
| help |
| This option enables support for the AMCC PPC440GRX evaluation board. |
| |
| config WARP |
| bool "PIKA Warp" |
| depends on 44x |
| default n |
| select 440EP |
| help |
| This option enables support for the PIKA Warp(tm) Appliance. The Warp |
| is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP |
| stations and trunks. |
| |
| See http://www.pikatechnologies.com/ and follow the "PIKA for Computer |
| Telephony Developers" link for more information. |
| |
| config ARCHES |
| bool "Arches" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 460EX # Odd since it uses 460GT but the effects are the same |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| help |
| This option enables support for the AMCC Dual PPC460GT evaluation board. |
| |
| config CANYONLANDS |
| bool "Canyonlands" |
| depends on 44x |
| default n |
| select 460EX |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| select PCI_MSI |
| select PPC4xx_MSI |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select IBM_EMAC_ZMII if IBM_EMAC |
| help |
| This option enables support for the AMCC PPC460EX evaluation board. |
| |
| config GLACIER |
| bool "Glacier" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 460EX # Odd since it uses 460GT but the effects are the same |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select IBM_EMAC_ZMII if IBM_EMAC |
| help |
| This option enables support for the AMCC PPC460GT evaluation board. |
| |
| config REDWOOD |
| bool "Redwood" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 460SX |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| select PCI_MSI |
| select PPC4xx_MSI |
| help |
| This option enables support for the AMCC PPC460SX Redwood board. |
| |
| config EIGER |
| bool "Eiger" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 460SX |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| select IBM_EMAC_RGMII if IBM_EMAC |
| help |
| This option enables support for the AMCC PPC460SX evaluation board. |
| |
| config YOSEMITE |
| bool "Yosemite" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440EP |
| select PCI |
| help |
| This option enables support for the AMCC PPC440EP evaluation board. |
| |
| config ISS4xx |
| bool "ISS 4xx Simulator" |
| depends on (44x || 40x) |
| default n |
| select 405GP if 40x |
| select 440GP if 44x && !PPC_47x |
| select PPC_FPU |
| select OF_RTC |
| help |
| This option enables support for the IBM ISS simulation environment |
| |
| config CURRITUCK |
| bool "IBM Currituck (476fpe) Support" |
| depends on PPC_47x |
| default n |
| select SWIOTLB |
| select 476FPE |
| select PPC4xx_PCI_EXPRESS |
| help |
| This option enables support for the IBM Currituck (476fpe) evaluation board |
| |
| config FSP2 |
| bool "IBM FSP2 (476fpe) Support" |
| depends on PPC_47x |
| default n |
| select 476FPE |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select COMMON_CLK |
| select DEFAULT_UIMAGE |
| help |
| This option enables support for the IBM FSP2 (476fpe) board |
| |
| config AKEBONO |
| bool "IBM Akebono (476gtr) Support" |
| depends on PPC_47x |
| default n |
| select SWIOTLB |
| select 476FPE |
| select PPC4xx_PCI_EXPRESS |
| select PCI_MSI |
| select PPC4xx_HSTA_MSI |
| select I2C |
| select I2C_IBM_IIC |
| select NETDEVICES |
| select ETHERNET |
| select NET_VENDOR_IBM |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select USB if USB_SUPPORT |
| select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD |
| select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD |
| select MMC_SDHCI |
| select MMC_SDHCI_PLTFM |
| select ATA |
| select SATA_AHCI_PLATFORM |
| help |
| This option enables support for the IBM Akebono (476gtr) evaluation board |
| |
| |
| config ICON |
| bool "Icon" |
| depends on 44x |
| default n |
| select PPC44x_SIMPLE |
| select 440SPe |
| select PCI |
| select PPC4xx_PCI_EXPRESS |
| help |
| This option enables support for the AMCC PPC440SPe evaluation board. |
| |
| config XILINX_VIRTEX440_GENERIC_BOARD |
| bool "Generic Xilinx Virtex 5 FXT board support" |
| depends on 44x |
| default n |
| select XILINX_VIRTEX_5_FXT |
| select XILINX_INTC |
| help |
| This option enables generic support for Xilinx Virtex based boards |
| that use a 440 based processor in the Virtex 5 FXT FPGA architecture. |
| |
| The generic virtex board support matches any device tree which |
| specifies 'xlnx,virtex440' in its compatible field. This includes |
| the Xilinx ML5xx reference designs using the powerpc core. |
| |
| Most Virtex 5 designs should use this unless it needs to do some |
| special configuration at board probe time. |
| |
| config XILINX_ML510 |
| bool "Xilinx ML510 extra support" |
| depends on XILINX_VIRTEX440_GENERIC_BOARD |
| select PPC_PCI_CHOICE |
| select XILINX_PCI if PCI |
| select PPC_INDIRECT_PCI if PCI |
| select PPC_I8259 if PCI |
| help |
| This option enables extra support for features on the Xilinx ML510 |
| board. The ML510 has a PCI bus with ALI south bridge. |
| |
| config PPC44x_SIMPLE |
| bool "Simple PowerPC 44x board support" |
| depends on 44x |
| default n |
| help |
| This option enables the simple PowerPC 44x platform support. |
| |
| config PPC4xx_GPIO |
| bool "PPC4xx GPIO support" |
| depends on 44x |
| select GPIOLIB |
| help |
| Enable gpiolib support for ppc440 based boards |
| |
| config PPC4xx_OCM |
| bool "PPC4xx On Chip Memory (OCM) support" |
| depends on 4xx |
| select PPC_LIB_RHEAP |
| help |
| Enable OCM support for PowerPC 4xx platforms with on chip memory, |
| OCM provides the fast place for memory access to improve performance. |
| |
| # 44x specific CPU modules, selected based on the board above. |
| config 440EP |
| bool |
| select PPC_FPU |
| select IBM440EP_ERR42 |
| select IBM_EMAC_ZMII if IBM_EMAC |
| |
| config 440EPX |
| bool |
| select PPC_FPU |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select IBM_EMAC_ZMII if IBM_EMAC |
| select USB_EHCI_BIG_ENDIAN_MMIO |
| select USB_EHCI_BIG_ENDIAN_DESC |
| |
| config 440GRX |
| bool |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select IBM_EMAC_ZMII if IBM_EMAC |
| |
| config 440GP |
| bool |
| select IBM_EMAC_ZMII if IBM_EMAC |
| |
| config 440GX |
| bool |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select IBM_EMAC_ZMII if IBM_EMAC #test only |
| select IBM_EMAC_TAH if IBM_EMAC #test only |
| |
| config 440SP |
| bool |
| |
| config 440SPe |
| bool |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| |
| config 460EX |
| bool |
| select PPC_FPU |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_TAH if IBM_EMAC |
| |
| config 460SX |
| bool |
| select PPC_FPU |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_RGMII if IBM_EMAC |
| select IBM_EMAC_ZMII if IBM_EMAC |
| select IBM_EMAC_TAH if IBM_EMAC |
| |
| config 476FPE |
| bool |
| select PPC_FPU |
| |
| config APM821xx |
| bool |
| select PPC_FPU |
| select IBM_EMAC_EMAC4 if IBM_EMAC |
| select IBM_EMAC_TAH if IBM_EMAC |
| |
| config 476FPE_ERR46 |
| depends on 476FPE |
| bool "Enable linker work around for PPC476FPE errata #46" |
| help |
| This option enables a work around for an icache bug on 476 |
| that can cause execution of stale instructions when falling |
| through pages (IBM errata #46). It requires a recent version |
| of binutils which supports the --ppc476-workaround option. |
| |
| The work around enables the appropriate linker options and |
| ensures that all module output sections are aligned to 4K |
| page boundaries. The work around is only required when |
| building modules. |
| |
| # 44x errata/workaround config symbols, selected by the CPU models above |
| config IBM440EP_ERR42 |
| bool |
| |
| # Xilinx specific config options. |
| config XILINX_VIRTEX |
| bool |
| select DEFAULT_UIMAGE |
| |
| # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above |
| config XILINX_VIRTEX_5_FXT |
| bool |
| select XILINX_VIRTEX |
| |
