Merge tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
- Additional CPU ID for the intel_pstate driver from Dirk Brandewie.
- More cpufreq fixes related to ARM big.LITTLE support and locking from
Viresh Kumar.
- VIA C7 cpufreq build fix from Rafał Bilski.
- ACPI power management fix making it possible to use device power
states regardless of the CONFIG_PM setting from Rafael J Wysocki.
- New ACPI video blacklist item from Bastian Triller.
* tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist
cpufreq: arm_big_little_dt: Instantiate as platform_driver
cpufreq: arm_big_little_dt: Register driver only if DT has valid data
cpufreq / e_powersaver: Fix linker error when ACPI processor is a module
cpufreq / intel_pstate: Add additional supported CPU ID
cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT
ACPI / PM: Allow device power states to be used for CONFIG_PM unset
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 44afa0e..4ff6504 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -4,7 +4,7 @@
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
- Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+ Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
new file mode 100644
index 0000000..3ea4605
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
@@ -0,0 +1,25 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+ - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ reg = <0x1d385000 (1600 * 1200 * 2)>;
+ width = <1600>;
+ height = <1200>;
+ stride = <(1600 * 2)>;
+ format = "r5g6b5";
+ };
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index c75694b..a9c16c9 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -79,20 +79,63 @@
In order to initialize the RapidIO subsystem, a platform must initialize and
register at least one master port within the RapidIO network. To register mport
within the subsystem controller driver initialization code calls function
-rio_register_mport() for each available master port. After all active master
-ports are registered with a RapidIO subsystem, the rio_init_mports() routine
-is called to perform enumeration and discovery.
+rio_register_mport() for each available master port.
-In the current PowerPC-based implementation a subsys_initcall() is specified to
-perform controller initialization and mport registration. At the end it directly
-calls rio_init_mports() to execute RapidIO enumeration and discovery.
+RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
+controller initialization (depending on controller device type).
+
+After all active master ports are registered with a RapidIO subsystem,
+an enumeration and/or discovery routine may be called automatically or
+by user-space command.
4. Enumeration and Discovery
----------------------------
-When rio_init_mports() is called it scans a list of registered master ports and
-calls an enumeration or discovery routine depending on the configured role of a
-master port: host or agent.
+4.1 Overview
+------------
+
+RapidIO subsystem configuration options allow users to specify enumeration and
+discovery methods as statically linked components or loadable modules.
+An enumeration/discovery method implementation and available input parameters
+define how any given method can be attached to available RapidIO mports:
+simply to all available mports OR individually to the specified mport device.
+
+Depending on selected enumeration/discovery build configuration, there are
+several methods to initiate an enumeration and/or discovery process:
+
+ (a) Statically linked enumeration and discovery process can be started
+ automatically during kernel initialization time using corresponding module
+ parameters. This was the original method used since introduction of RapidIO
+ subsystem. Now this method relies on enumerator module parameter which is
+ 'rio-scan.scan' for existing basic enumeration/discovery method.
+ When automatic start of enumeration/discovery is used a user has to ensure
+ that all discovering endpoints are started before the enumerating endpoint
+ and are waiting for enumeration to be completed.
+ Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering
+ endpoint waits for enumeration to be completed. If the specified timeout
+ expires the discovery process is terminated without obtaining RapidIO network
+ information. NOTE: a timed out discovery process may be restarted later using
+ a user-space command as it is described later if the given endpoint was
+ enumerated successfully.
+
+ (b) Statically linked enumeration and discovery process can be started by
+ a command from user space. This initiation method provides more flexibility
+ for a system startup compared to the option (a) above. After all participating
+ endpoints have been successfully booted, an enumeration process shall be
+ started first by issuing a user-space command, after an enumeration is
+ completed a discovery process can be started on all remaining endpoints.
+
+ (c) Modular enumeration and discovery process can be started by a command from
+ user space. After an enumeration/discovery module is loaded, a network scan
+ process can be started by issuing a user-space command.
+ Similar to the option (b) above, an enumerator has to be started first.
+
+ (d) Modular enumeration and discovery process can be started by a module
+ initialization routine. In this case an enumerating module shall be loaded
+ first.
+
+When a network scan process is started it calls an enumeration or discovery
+routine depending on the configured role of a master port: host or agent.
Enumeration is performed by a master port if it is configured as a host port by
assigning a host device ID greater than or equal to zero. A host device ID is
@@ -104,8 +147,58 @@
The enumeration and discovery routines use RapidIO maintenance transactions
to access the configuration space of devices.
-The enumeration process is implemented according to the enumeration algorithm
-outlined in the RapidIO Interconnect Specification: Annex I [1].
+4.2 Automatic Start of Enumeration and Discovery
+------------------------------------------------
+
+Automatic enumeration/discovery start method is applicable only to built-in
+enumeration/discovery RapidIO configuration selection. To enable automatic
+enumeration/discovery start by existing basic enumerator method set use boot
+command line parameter "rio-scan.scan=1".
+
+This configuration requires synchronized start of all RapidIO endpoints that
+form a network which will be enumerated/discovered. Discovering endpoints have
+to be started before an enumeration starts to ensure that all RapidIO
+controllers have been initialized and are ready to be discovered. Configuration
+parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which
+a discovering endpoint will wait for enumeration to be completed.
+
+When automatic enumeration/discovery start is selected, basic method's
+initialization routine calls rio_init_mports() to perform enumeration or
+discovery for all known mport devices.
+
+Depending on RapidIO network size and configuration this automatic
+enumeration/discovery start method may be difficult to use due to the
+requirement for synchronized start of all endpoints.
+
+4.3 User-space Start of Enumeration and Discovery
+-------------------------------------------------
+
+User-space start of enumeration and discovery can be used with built-in and
+modular build configurations. For user-space controlled start RapidIO subsystem
+creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate
+an enumeration or discovery process on specific mport device, a user needs to
+write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a
+sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device
+registration. For example for machine with single RapidIO controller, mport_ID
+for that controller always will be 0.
+
+To initiate RapidIO enumeration/discovery on all available mports a user may
+write '-1' (or RIO_MPORT_ANY) into the scan attribute file.
+
+4.4 Basic Enumeration Method
+----------------------------
+
+This is an original enumeration/discovery method which is available since
+first release of RapidIO subsystem code. The enumeration process is
+implemented according to the enumeration algorithm outlined in the RapidIO
+Interconnect Specification: Annex I [1].
+
+This method can be configured as statically linked or loadable module.
+The method's single parameter "scan" allows to trigger the enumeration/discovery
+process from module initialization routine.
+
+This enumeration/discovery method can be started only once and does not support
+unloading if it is built as a module.
The enumeration process traverses the network using a recursive depth-first
algorithm. When a new device is found, the enumerator takes ownership of that
@@ -160,6 +253,19 @@
an agent skips RapidIO discovery and continues with remaining kernel
initialization.
+4.5 Adding New Enumeration/Discovery Method
+-------------------------------------------
+
+RapidIO subsystem code organization allows addition of new enumeration/discovery
+methods as new configuration options without significant impact to to the core
+RapidIO code.
+
+A new enumeration/discovery method has to be attached to one or more mport
+devices before an enumeration/discovery process can be started. Normally,
+method's module initialization routine calls rio_register_scan() to attach
+an enumerator to a specified mport device (or devices). The basic enumerator
+implementation demonstrates this process.
+
5. References
-------------
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt
index 97f71ce..1987817 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/rapidio/sysfs.txt
@@ -88,3 +88,20 @@
IDT_GEN2:
errlog - reads contents of device error log until it is empty.
+
+
+5. RapidIO Bus Attributes
+-------------------------
+
+RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific
+attribute:
+
+ scan - allows to trigger enumeration discovery process from user space. This
+ is a write-only attribute. To initiate an enumeration or discovery
+ process on specific mport device, a user needs to write mport_ID (not
+ RapidIO destination ID) into this file. The mport_ID is a sequential
+ number (0 ... RIO_MAX_MPORTS) assigned to the mport device.
+ For example, for a machine with a single RapidIO controller, mport_ID
+ for that controller always will be 0.
+ To initiate RapidIO enumeration/discovery on all available mports
+ a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.
diff --git a/MAINTAINERS b/MAINTAINERS
index 829c032..b645a3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3865,9 +3865,16 @@
M: Haiyang Zhang <haiyangz@microsoft.com>
L: devel@linuxdriverproject.org
S: Maintained
-F: drivers/hv/
+F: arch/x86/include/asm/mshyperv.h
+F: arch/x86/include/uapi/asm/hyperv.h
+F: arch/x86/kernel/cpu/mshyperv.c
F: drivers/hid/hid-hyperv.c
+F: drivers/hv/
F: drivers/net/hyperv/
+F: drivers/scsi/storvsc_drv.c
+F: drivers/video/hyperv_fb.c
+F: include/linux/hyperv.h
+F: tools/hv/
I2C OVER PARALLEL PORT
M: Jean Delvare <khali@linux-fr.org>
@@ -4641,12 +4648,13 @@
F: include/uapi/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-M: Marcelo Tosatti <mtosatti@redhat.com>
M: Gleb Natapov <gleb@redhat.com>
+M: Paolo Bonzini <pbonzini@redhat.com>
L: kvm@vger.kernel.org
-W: http://kvm.qumranet.com
+W: http://linux-kvm.org
S: Supported
-F: Documentation/*/kvm.txt
+F: Documentation/*/kvm*.txt
+F: Documentation/virtual/kvm/
F: arch/*/kvm/
F: arch/*/include/asm/kvm*
F: include/linux/kvm*
@@ -5516,18 +5524,18 @@
F: Documentation/networking/vxge.txt
F: drivers/net/ethernet/neterion/
-NETFILTER/IPTABLES/IPCHAINS
-P: Harald Welte
-P: Jozsef Kadlecsik
+NETFILTER/IPTABLES
M: Pablo Neira Ayuso <pablo@netfilter.org>
M: Patrick McHardy <kaber@trash.net>
+M: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://1984.lsi.us.es/nf
-T: git git://1984.lsi.us.es/nf-next
+Q: http://patchwork.ozlabs.org/project/netfilter-devel/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index c0fd362..0fa0d4a 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -37,7 +37,7 @@
soc100 {
uart@FF100000 {
- pinctrl-names = "abilis,simple-default";
+ pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index 6f8c381..a4d80ce 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -37,7 +37,7 @@
soc100 {
uart@FF100000 {
- pinctrl-names = "abilis,simple-default";
+ pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index a6139fc..b97e305 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -88,8 +88,7 @@
};
uart@FF100000 {
- compatible = "snps,dw-apb-uart",
- "abilis,simple-pinctrl";
+ compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>;
clock-frequency = <166666666>;
interrupts = <25 1>;
@@ -184,8 +183,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- compatible = "abilis,tb100-spi",
- "abilis,simple-pinctrl";
+ compatible = "abilis,tb100-spi";
num-cs = <2>;
reg = <0xFE011000 0x20>;
interrupt-parent = <&tb10x_ictl>;
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index 9f841af..ef62682 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -93,14 +93,16 @@
#endif
}
-#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3)
+#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
/*
* checks if two addresses (after page aligning) index into same cache set
*/
#define addr_not_cache_congruent(addr1, addr2) \
+({ \
cache_is_vipt_aliasing() ? \
- (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \
+ (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \
+})
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 374a355..ab84bf1 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -19,13 +19,6 @@
#define clear_page(paddr) memset((paddr), 0, PAGE_SIZE)
#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-#define clear_user_page(addr, vaddr, pg) clear_page(addr)
-#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom)
-
-#else /* VIPT aliasing dcache */
-
struct vm_area_struct;
struct page;
@@ -35,8 +28,6 @@
unsigned long u_vaddr, struct vm_area_struct *vma);
void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
-#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 1cc4720..95b1522 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -57,9 +57,9 @@
#define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */
#define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */
-#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */
-#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */
-#define _PAGE_READ (1<<5) /* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */
+#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */
+#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */
#define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */
#define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */
#define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */
@@ -72,9 +72,9 @@
/* PD1 */
#define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */
-#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */
-#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */
-#define _PAGE_READ (1<<3) /* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */
+#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */
+#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */
#define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */
#define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */
#define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */
@@ -93,7 +93,8 @@
#endif
/* Kernel allowed all permissions for all pages */
-#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
+#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \
+ _PAGE_GLOBAL | _PAGE_PRESENT)
#ifdef CONFIG_ARC_CACHE_PAGES
#define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE
@@ -106,7 +107,11 @@
* -by default cached, unless config otherwise
* -present in memory
*/
-#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
+#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
+
+#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ)
+#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE)
+#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE)
/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
@@ -125,11 +130,10 @@
* kernel vaddr space - visible in all addr spaces, but kernel mode only
* Thus Global, all-kernel-access, no-user-access, cached
*/
-#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL)
+#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
/* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \
- _PAGE_GLOBAL)
+#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
index 85b6df8..cb0c708 100644
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -16,7 +16,7 @@
/* Masks for actual TLB "PD"s */
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \
- _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
+ _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
#ifndef __ASSEMBLY__
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 2f12bca..aedce19 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -610,7 +610,7 @@
local_irq_save(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
- __dc_line_op(paddr, vaddr, len, OP_FLUSH);
+ __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
local_irq_restore(flags);
}
@@ -676,6 +676,17 @@
flush_cache_all();
}
+void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long u_vaddr)
+{
+ /* TBD: do we really need to clear the kernel mapping */
+ __flush_dcache_page(page_address(page), u_vaddr);
+ __flush_dcache_page(page_address(page), page_address(page));
+
+}
+
+#endif
+
void copy_user_highpage(struct page *to, struct page *from,
unsigned long u_vaddr, struct vm_area_struct *vma)
{
@@ -725,16 +736,6 @@
set_bit(PG_arch_1, &page->flags);
}
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
- unsigned long u_vaddr)
-{
- /* TBD: do we really need to clear the kernel mapping */
- __flush_dcache_page(page_address(page), u_vaddr);
- __flush_dcache_page(page_address(page), page_address(page));
-
-}
-
-#endif
/**********************************************************************
* Explicit Cache flush request from user space via syscall
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 066145b..fe1c5a0 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -444,7 +444,8 @@
* so userspace sees the right data.
* (Avoids the flush for Non-exec + congruent mapping case)
*/
- if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) {
+ if ((vma->vm_flags & VM_EXEC) ||
+ addr_not_cache_congruent(paddr, vaddr)) {
struct page *page = pfn_to_page(pte_pfn(*ptep));
int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 9df765d..3357d26 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -277,7 +277,7 @@
;----------------------------------------------------------------
; VERIFY_PTE: Check if PTE permissions approp for executing code
cmp_s r2, VMALLOC_START
- mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE)
+ mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE)
mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE)
and r3, r0, r2 ; Mask out NON Flag bits from PTE
@@ -320,9 +320,9 @@
mov_s r2, 0
lr r3, [ecr]
btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access
- or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE
+ or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE
btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access
- or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE
+ or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE
; Above laddering takes care of XCHG access
; which is both Read and Write
diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c
index d356769..06cb309 100644
--- a/arch/arc/plat-tb10x/tb10x.c
+++ b/arch/arc/plat-tb10x/tb10x.c
@@ -34,31 +34,6 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static void __init tb10x_platform_late_init(void)
-{
- struct device_node *dn;
-
- /*
- * Pinctrl documentation recommends setting up the iomux here for
- * all modules which don't require control over the pins themselves.
- * Modules which need this kind of assistance are compatible with
- * "abilis,simple-pinctrl", i.e. we can easily iterate over them.
- * TODO: Does this recommended method work cleanly with pins required
- * by modules?
- */
- for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
- struct platform_device *pd = of_find_device_by_node(dn);
- struct pinctrl *pctl;
-
- pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
- if (IS_ERR(pctl)) {
- int ret = PTR_ERR(pctl);
- dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
- ret);
- }
- }
-}
-
static const char *tb10x_compat[] __initdata = {
"abilis,arc-tb10x",
NULL,
@@ -67,5 +42,4 @@
MACHINE_START(TB10x, "tb10x")
.dt_compat = tb10x_compat,
.init_machine = tb10x_platform_init,
- .init_late = tb10x_platform_late_init,
MACHINE_END
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121..f0895c5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,7 +177,9 @@
spear320-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+dtb-$(CONFIG_ARCH_SUNXI) += \
+ sun4i-a10-cubieboard.dtb \
+ sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 272bbc6..550eb77 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -33,7 +33,8 @@
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&mpic>;
- ranges = <0 0 0xd0000000 0x100000>;
+ ranges = <0 0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b2c1b5a..aee2b18 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -29,7 +29,8 @@
};
soc {
- ranges = <0 0xd0000000 0x100000>;
+ ranges = <0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
@@ -38,12 +39,12 @@
L2: l2-cache {
compatible = "marvell,aurora-outer-cache";
- reg = <0xd0008000 0x1000>;
+ reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 26ad06f..3ee63d1 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,6 +39,9 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000
+ 0xf0000000 0 0xf0000000 0x1000000>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index f14d36c..46b7850 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,6 +27,9 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000
+ 0xf0000000 0 0xf0000000 0x8000000>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bacab11..5b902f9 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -31,7 +31,7 @@
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 70b5ccb..84c4bef 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -264,7 +264,7 @@
atmel,pins =
<0 10 0x2 0x0 /* PA10 periph B */
0 11 0x2 0x0 /* PA11 periph B */
- 0 24 0x2 0x0 /* PA24 periph B */
+ 0 22 0x2 0x0 /* PA22 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0 /* PA26 periph B */
0 27 0x2 0x0 /* PA27 periph B */
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3de8e6d..8d25f88 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -57,6 +57,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe800 {
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 3b40d11..315250b 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -11,7 +11,7 @@
/include/ "at91sam9x5ek.dtsi"
/ {
- model = "Atmel AT91SAM9G25-EK";
+ model = "Atmel AT91SAM9X25-EK";
compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
ahb {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 82a404d..99ba6e1 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -516,7 +516,7 @@
usb_otg_hs: usb_otg_hs@480ab000 {
compatible = "ti,omap3-musb";
reg = <0x480ab000 0x1000>;
- interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupts = <92>, <93>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
multipoint = <1>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2e643ea..5000e0d 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,11 +75,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 4 3>;
- cs-gpios = <&pioD 13 0
- &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
- &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
- &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -156,7 +151,7 @@
};
macb0: ethernet@f0028000 {
- compatible = "cnds,pc302-gem", "cdns,gem";
+ compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 4 3>;
pinctrl-names = "default";
@@ -203,11 +198,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 4 3>;
- cs-gpios = <&pioC 25 0
- &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
- &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
- &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8ed40..b336e77 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -32,6 +32,10 @@
ahb {
apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index b28fbf3..6f82d93 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -14,13 +14,19 @@
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
+ /* This is where the interrupt is routed on the S8815 board */
+ external-bus@34000000 {
+ ethernet@300 {
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 0x1>;
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
ethernet-gpio {
- gpios = <&gpio3 19 0x1>;
- interrupts = <19 0x1>;
- interrupt-parent = <&gpio3>;
+ gpios = <&gpio3 8 0x1>;
};
/* This will bias the MMC/SD card detect line */
mmcsd-gpio {
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 4a7c35d..078ed7f 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,8 +22,8 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc {
- uart0: uart@01c28000 {
+ soc@01c20000 {
+ uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7e0ebb6..9940f7b 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -199,7 +199,6 @@
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64b..abbe319 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -20,6 +20,7 @@
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
@@ -204,7 +205,6 @@
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a5f0485..f7ba3161 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -153,6 +153,7 @@
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
@@ -202,7 +203,7 @@
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
-CONFIG_SENSORS_AK8975=y
+CONFIG_AK8975=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index 92c6eed..99207c4 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -195,6 +195,7 @@
add r3,r3,r10 @ E+=F_00_19(B,C,D)
cmp r14,sp
bne .L_00_15 @ [((11+4)*5+2)*3]
+ sub sp,sp,#25*4
#if __ARM_ARCH__<7
ldrb r10,[r1,#2]
ldrb r9,[r1,#3]
@@ -290,7 +291,6 @@
add r3,r3,r10 @ E+=F_00_19(B,C,D)
ldr r8,.LK_20_39 @ [+15+16*4]
- sub sp,sp,#25*4
cmn sp,#0 @ [+3], clear carry to denote 20_39
.L_20_39_or_60_79:
ldr r9,[r14,#15*4]
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index 2848857..fbd24be 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -24,9 +24,9 @@
#define U8500_UART0_PHYS_BASE (0x80120000)
#define U8500_UART1_PHYS_BASE (0x80121000)
#define U8500_UART2_PHYS_BASE (0x80007000)
-#define U8500_UART0_VIRT_BASE (0xa8120000)
-#define U8500_UART1_VIRT_BASE (0xa8121000)
-#define U8500_UART2_VIRT_BASE (0xa8007000)
+#define U8500_UART0_VIRT_BASE (0xf8120000)
+#define U8500_UART1_VIRT_BASE (0xf8121000)
+#define U8500_UART2_VIRT_BASE (0xf8007000)
#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE
#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE
#endif
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index f219703..282de48 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -411,7 +411,6 @@
.vm_start = 0xffff0000,
.vm_end = 0xffff0000 + PAGE_SIZE,
.vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC,
- .vm_mm = &init_mm,
};
static int __init gate_vma_init(void)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 47ab905..550d63c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -251,7 +251,7 @@
* this returns, power and/or clocks can be removed at any point
* from this CPU and its cache by platform_cpu_kill().
*/
- RCU_NONIDLE(complete(&cpu_died));
+ complete(&cpu_died);
/*
* Ensure that the cache lines associated with that completion are
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2acdff4..180b302 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,6 +174,7 @@
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@@ -264,9 +265,11 @@
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
+ clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
+ clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
+ clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
- 2, AT91_ST_ALMV);
+ clockevents_register_device(&clkevt);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 13cdbcd..c7d670d 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -223,13 +223,7 @@
at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
}
-void __init at91sam9n12_initialize(void)
-{
- at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-}
-
AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
- .init = at91sam9n12_initialize,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 31df120..2bd7f51 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -179,9 +179,9 @@
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
-#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
-#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
-#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
+#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */
+#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */
+#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 1512590..dda9a2b 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -177,7 +177,8 @@
static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -185,7 +186,7 @@
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
@@ -369,8 +370,8 @@
clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
@@ -498,7 +499,7 @@
clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
- clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18);
+ clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 67b9c48..627f16f 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -18,8 +18,20 @@
.section ".text.head", "ax"
#ifdef CONFIG_SMP
+diag_reg_offset:
+ .word g_diag_reg - .
+
+ .macro set_diag_reg
+ adr r0, diag_reg_offset
+ ldr r1, [r0]
+ add r1, r1, r0 @ r1 = physical &g_diag_reg
+ ldr r0, [r1]
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ .endm
+
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
+ set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 4a69305..c6e1ab5 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/smp.h>
+#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
@@ -21,6 +22,7 @@
#define SCU_STANDBY_ENABLE (1 << 5)
+u32 g_diag_reg;
static void __iomem *scu_base;
static struct map_desc scu_io_desc __initdata = {
@@ -80,6 +82,18 @@
static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
+
+ /*
+ * The diagnostic register holds the errata bits. Mostly bootloader
+ * does not bring up secondary cores, so that when errata bits are set
+ * in bootloader, they are set only for boot cpu. But on a SMP
+ * configuration, it should be equally done on every single core.
+ * Read the register from boot cpu here, and will replicate it into
+ * secondary cores when booting them.
+ */
+ asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
+ __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
+ outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
}
struct smp_operations imx_smp_ops __initdata = {
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c2cae69..f389228 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -528,12 +528,6 @@
{
orion_time_set_base(TIMER_VIRT_BASE);
- /*
- * Some Kirkwood devices allocate their coherent buffers from atomic
- * context. Increase size of atomic coherent pool to make sure such
- * the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
mvebu_mbus_init("marvell,kirkwood-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 283abff..e1267d6 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -124,7 +124,7 @@
static int __init ts219_pci_init(void)
{
if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
+ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
return 0;
}
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e11acbb..80a8bca 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -15,6 +15,7 @@
select MVEBU_CLK_GATING
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
+ select ARCH_REQUIRE_GPIOLIB
if ARCH_MVEBU
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 42a4cb3..1c48890 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -54,13 +54,6 @@
char *mbus_soc_name;
/*
- * Some Armada 370/XP devices allocate their coherent buffers
- * from atomic context. Increase size of atomic coherent pool
- * to make sure such the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
-
- /*
* This initialization will be replaced by a DT-based
* initialization once the mvebu-mbus driver gains DT support.
*/
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 68ab858..a94b3a7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -345,6 +345,7 @@
dev_err(&pdev->dev,
"%s: Memory allocation failed for d->chan!\n",
__func__);
+ ret = -ENOMEM;
goto exit_release_d;
}
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
index 6ebc780..af3544c 100644
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ b/arch/arm/mach-omap2/cclock33xx_data.c
@@ -454,9 +454,29 @@
*/
DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
-DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0,
- AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
- 0x0, NULL);
+static struct clk clkdiv32k_ick;
+
+static const char *clkdiv32k_ick_parent_names[] = {
+ "clkdiv32k_ck",
+};
+
+static const struct clk_ops clkdiv32k_ick_ops = {
+ .enable = &omap2_dflt_clk_enable,
+ .disable = &omap2_dflt_clk_disable,
+ .is_enabled = &omap2_dflt_clk_is_enabled,
+ .init = &omap2_init_clk_clkdm,
+};
+
+static struct clk_hw_omap clkdiv32k_ick_hw = {
+ .hw = {
+ .clk = &clkdiv32k_ick,
+ },
+ .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL,
+ .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT,
+ .clkdm_name = "clk_24mhz_clkdm",
+};
+
+DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops);
/* "usbotg_fck" is an additional clock and not really a modulemode */
DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d25a95f..7341eff 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1356,13 +1356,27 @@
clkdm = _get_clkdm(oh);
if (sf & SYSC_HAS_SIDLEMODE) {
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
+ idlemode = HWMOD_IDLEMODE_NO;
+ } else {
+ if (sf & SYSC_HAS_ENAWAKEUP)
+ _enable_wakeup(oh, &v);
+ if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ }
+
+ /*
+ * This is special handling for some IPs like
+ * 32k sync timer. Force them to idle!
+ */
clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
if (clkdm_act && !(oh->class->sysc->idlemodes &
(SIDLE_SMART | SIDLE_SMART_WKUP)))
idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1391,10 +1405,6 @@
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
- /* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
- _enable_wakeup(oh, &v);
-
_write_sysconfig(v, oh);
/*
@@ -1430,13 +1440,16 @@
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
- if (oh->flags & HWMOD_SWSUP_SIDLE ||
- !(oh->class->sysc->idlemodes &
- (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ if (oh->flags & HWMOD_SWSUP_SIDLE) {
idlemode = HWMOD_IDLEMODE_FORCE;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
+ } else {
+ if (sf & SYSC_HAS_ENAWAKEUP)
+ _enable_wakeup(oh, &v);
+ if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+ idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
+ }
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1455,10 +1468,6 @@
_set_master_standbymode(oh, idlemode, &v);
}
- /* If slave is in SMARTIDLE, also enable wakeup */
- if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
- _enable_wakeup(oh, &v);
-
_write_sysconfig(v, oh);
}
@@ -2065,7 +2074,7 @@
* do so is present in the hwmod data, then call it and pass along the
* return value; otherwise, return 0.
*/
-static int __init _enable_preprogram(struct omap_hwmod *oh)
+static int _enable_preprogram(struct omap_hwmod *oh)
{
if (!oh->class->enable_preprogram)
return 0;
@@ -2246,42 +2255,6 @@
}
/**
- * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- *
- * Sets the IP block's OCP autoidle bit in hardware, and updates our
- * local copy. Intended to be used by drivers that require
- * direct manipulation of the AUTOIDLE bits.
- * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
- * along the return value from _set_module_autoidle().
- *
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
-{
- u32 v;
- int retval = 0;
- unsigned long flags;
-
- if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
- return -EINVAL;
-
- spin_lock_irqsave(&oh->_lock, flags);
-
- v = oh->_sysc_cache;
-
- retval = _set_module_autoidle(oh, autoidle, &v);
-
- if (!retval)
- _write_sysconfig(v, oh);
-
- spin_unlock_irqrestore(&oh->_lock, flags);
-
- return retval;
-}
-
-/**
* _shutdown - shutdown an omap_hwmod
* @oh: struct omap_hwmod *
*
@@ -3180,38 +3153,6 @@
}
/**
- * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits (shifted to bit 0)
- *
- * Sets the IP block's OCP slave idlemode in hardware, and updates our
- * local copy. Intended to be used by drivers that have some erratum
- * that requires direct manipulation of the SIDLEMODE bits. Returns
- * -EINVAL if @oh is null, or passes along the return value from
- * _set_slave_idlemode().
- *
- * XXX Does this function have any current users? If not, we should
- * remove it; it is better to let the rest of the hwmod code handle this.
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
-{
- u32 v;
- int retval = 0;
-
- if (!oh)
- return -EINVAL;
-
- v = oh->_sysc_cache;
-
- retval = _set_slave_idlemode(oh, idlemode, &v);
- if (!retval)
- _write_sysconfig(v, oh);
-
- return retval;
-}
-
-/**
* omap_hwmod_lookup - look up a registered omap_hwmod by name
* @name: name of the omap_hwmod to look up
*
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index fe59629..0c898f5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -463,6 +463,9 @@
* is kept in force-standby mode. Failing to do so causes PM problems
* with musb on OMAP3630 at least. Note that musb has a dedicated register
* to control MSTANDBY signal when MIDLEMODE is set to force-standby.
+ * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
+ * out of idle, but rely on smart-idle to the put it back in idle,
+ * so the wakeups are still functional (Only known case for now is UART)
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -476,6 +479,7 @@
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
#define HWMOD_FORCE_MSTANDBY (1 << 11)
+#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
/*
* omap_hwmod._int_flags definitions
@@ -641,9 +645,6 @@
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index c8c64b3..d05fc7b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,6 +512,7 @@
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -531,6 +532,7 @@
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -550,6 +552,7 @@
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 01d8f32..075f7cc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -1995,6 +1995,7 @@
.name = "uart1",
.class = &uart_class,
.clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart1_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_wkupdm_ck",
@@ -2015,6 +2016,7 @@
.name = "uart2",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart2_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2042,6 +2044,7 @@
.name = "uart3",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart3_irqs,
.sdma_reqs = uart3_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2062,6 +2065,7 @@
.name = "uart4",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart4_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2082,6 +2086,7 @@
.name = "uart5",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart5_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
@@ -2102,6 +2107,7 @@
.name = "uart6",
.class = &uart_class,
.clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = am33xx_uart6_irqs,
.sdma_reqs = uart1_edma_reqs,
.main_clk = "dpll_per_m2_div4_ck",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 4083606..31c7126 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,6 +490,7 @@
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -508,6 +509,7 @@
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -526,6 +528,7 @@
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
@@ -555,6 +558,7 @@
.mpu_irqs = uart4_mpu_irqs,
.sdma_reqs = uart4_sdma_reqs,
.main_clk = "uart4_fck",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index eaba9dc..848b6dc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -3434,6 +3434,7 @@
.name = "uart1",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart1_irqs,
.sdma_reqs = omap44xx_uart1_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3462,6 +3463,7 @@
.name = "uart2",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart2_irqs,
.sdma_reqs = omap44xx_uart2_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3490,7 +3492,8 @@
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
+ HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart3_irqs,
.sdma_reqs = omap44xx_uart3_sdma_reqs,
.main_clk = "func_48m_fclk",
@@ -3519,6 +3522,7 @@
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
.mpu_irqs = omap44xx_uart4_irqs,
.sdma_reqs = omap44xx_uart4_sdma_reqs,
.main_clk = "func_48m_fclk",
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8396b5b..f660156 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -95,38 +95,9 @@
omap_hwmod_disable_wakeup(od->hwmods[0]);
}
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
-
- omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_device *od = to_omap_device(pdev);
- u8 idlemode;
-
- if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
- idlemode = HWMOD_IDLEMODE_SMART_WKUP;
- else
- idlemode = HWMOD_IDLEMODE_SMART;
-
- omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
#else
static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
@@ -299,8 +270,6 @@
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
omap_up.flags = UPF_BOOT_AUTOCONF;
omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
- omap_up.set_forceidle = omap_uart_set_smartidle;
- omap_up.set_noidle = omap_uart_set_noidle;
omap_up.enable_wakeup = omap_uart_enable_wakeup;
omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
omap_up.dma_rx_timeout = info->dma_rx_timeout;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b97fd67..f8a6db9 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -199,13 +199,6 @@
orion_time_set_base(TIMER_VIRT_BASE);
- /*
- * Some Orion5x devices allocate their coherent buffers from atomic
- * context. Increase size of atomic coherent pool to make sure such
- * the allocations won't fail.
- */
- init_dma_coherent_pool_size(SZ_1M);
-
/* Initialize the MBUS driver */
orion5x_pcie_id(&dev, &rev);
if (dev == MV88F5281_DEV_ID)
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 9105285..b9594e9 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -212,8 +212,8 @@
static struct usb_phy *phy;
static int usb_power_on(struct platform_device *pdev)
{
- if (!phy)
- return -EIO;
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
@@ -225,7 +225,7 @@
static void usb_power_off(struct platform_device *pdev)
{
- if (!phy)
+ if (IS_ERR(phy))
return;
usb_phy_shutdown(phy);
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d259c78..5b045e3 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,6 @@
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6a4387e..b19b072 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -51,6 +51,7 @@
bool "U8500 Development platform, MOP500 versions"
select I2C
select I2C_NOMADIK
+ select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select SOC_BUS
select UX500_SOC_DB8500
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 3cd555a..78389de 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -623,7 +623,7 @@
sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
mop500_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
@@ -660,7 +660,7 @@
sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
snowball_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
snowball_platform_devs[i]->dev.parent = parent;
@@ -698,7 +698,7 @@
sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
hrefv60_pinmaps_init();
- parent = u8500_init_devices(&ab8500_platdata);
+ parent = u8500_init_devices();
for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
mop500_platform_devs[i]->dev.parent = parent;
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index e90b5ab..46cca52 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -206,7 +206,7 @@
/*
* This function is called from the board init
*/
-struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
+struct device * __init u8500_init_devices(void)
{
struct device *parent;
int i;
@@ -220,8 +220,6 @@
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
- db8500_prcmu_device.dev.platform_data = ab8500;
-
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return parent;
@@ -278,7 +276,7 @@
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
- OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL),
+ OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index bddce2b..cad3ca8 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -18,7 +18,7 @@
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
-extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500);
+extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
extern void __init ux500_init_late(void);
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 1dd281e..f5c33df 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -173,6 +173,7 @@
"wm,wm8505",
"wm,wm8750",
"wm,wm8850",
+ NULL
};
DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 251f827..c019b7a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -383,7 +383,7 @@
static struct platform_device orion_ge10_shared = {
.name = MV643XX_ETH_SHARED_NAME,
- .id = 1,
+ .id = 2,
.dev = {
.platform_data = &orion_ge10_shared_data,
},
@@ -398,8 +398,8 @@
static struct platform_device orion_ge10 = {
.name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = 2,
+ .id = 2,
+ .num_resources = 1,
.resource = orion_ge10_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -432,7 +432,7 @@
static struct platform_device orion_ge11_shared = {
.name = MV643XX_ETH_SHARED_NAME,
- .id = 1,
+ .id = 3,
.dev = {
.platform_data = &orion_ge11_shared_data,
},
@@ -447,8 +447,8 @@
static struct platform_device orion_ge11 = {
.name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = 2,
+ .id = 3,
+ .num_resources = 1,
.resource = orion_ge11_resources,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e06fc5f..d9a24f6 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -10,6 +10,7 @@
#ifndef __PLAT_COMMON_H
#include <linux/mv643xx_eth.h>
+#include <linux/platform_data/usb-ehci-orion.h>
struct dsa_platform_data;
struct mv_sata_platform_data;
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 323ce1a..46e1749 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -60,7 +60,7 @@
str r11, [r10, #TI_PREEMPT]
#endif
ldr r0, VFP_arch_address
- str r5, [r0] @ known non-zero value
+ str r0, [r0] @ set to non-zero value
mov pc, r9 @ we have handled the fault
ENDPROC(vfp_testing_entry)
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index bdc3558..549903c 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -205,6 +205,11 @@
config ARCH_SPARSEMEM_ENABLE
def_bool n
+config NODES_SHIFT
+ int
+ default "2"
+ depends on NEED_MULTIPLE_NODES
+
source "mm/Kconfig"
config OWNERSHIP_TRACE
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 4dd4f78..d22af85 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -2,3 +2,4 @@
generic-y += clkdev.h
generic-y += exec.h
generic-y += trace_clock.h
+generic-y += param.h
diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h
deleted file mode 100644
index 0b864d7..0000000
--- a/arch/avr32/include/asm/numnodes.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NUMNODES_H
-#define __ASM_AVR32_NUMNODES_H
-
-/* Max 4 nodes */
-#define NODES_SHIFT 2
-
-#endif /* __ASM_AVR32_NUMNODES_H */
diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h
deleted file mode 100644
index 009a167..0000000
--- a/arch/avr32/include/asm/param.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_AVR32_PARAM_H
-#define __ASM_AVR32_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# define HZ CONFIG_HZ
-# define USER_HZ 100 /* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
-#endif /* __ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index df53e7a..3b85ead 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -33,3 +33,4 @@
header-y += termios.h
header-y += types.h
header-y += unistd.h
+generic-y += param.h
diff --git a/arch/avr32/include/uapi/asm/param.h b/arch/avr32/include/uapi/asm/param.h
deleted file mode 100644
index d28aa5e..0000000
--- a/arch/avr32/include/uapi/asm/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _UAPI__ASM_AVR32_PARAM_H
-#define _UAPI__ASM_AVR32_PARAM_H
-
-
-#ifndef HZ
-# define HZ 100
-#endif
-
-/* TODO: Should be configurable */
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-# define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64
-
-#endif /* _UAPI__ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 596f730..2c94129 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -264,7 +264,7 @@
break;
case R_AVR32_GOT18SW:
if ((relocation & 0xfffe0003) != 0
- && (relocation & 0xfffc0003) != 0xffff0000)
+ && (relocation & 0xfffc0000) != 0xfffc0000)
return reloc_overflow(module, "R_AVR32_GOT18SW",
relocation);
relocation >>= 2;
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index cb0f6af..9edc35f 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -31,6 +31,7 @@
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <asm/bootinfo.h>
+#include <asm/idle.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 38afb11..93fa586 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -36,6 +36,7 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
+#include <asm/idle.h>
#include <asm/processor.h>
#include <asm/time.h>
#include <asm/mach-au1x00/au1000.h>
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index a0233a2..8be4e85 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <asm/bootinfo.h>
+#include <asm/idle.h>
#include <asm/time.h> /* for mips_hpt_frequency */
#include <asm/reboot.h> /* for _machine_{restart,halt} */
#include <asm/mips_machine.h>
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 516b442..4eedd48 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/leds.h>
+#include <asm/idle.h>
#include <asm/processor.h>
#include <cobalt.h>
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index face9d2..bac26b9 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -228,7 +228,6 @@
CONFIG_USB_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
diff --git a/arch/mips/configs/db1235_defconfig b/arch/mips/configs/db1235_defconfig
index 14752dd..e2b4ad5 100644
--- a/arch/mips/configs/db1235_defconfig
+++ b/arch/mips/configs/db1235_defconfig
@@ -344,7 +344,6 @@
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index b6acd2f..343bebc 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -300,7 +300,6 @@
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
index c9456e7..778e32d 100644
--- a/arch/mips/include/asm/clock.h
+++ b/arch/mips/include/asm/clock.h
@@ -6,8 +6,6 @@
#include <linux/seq_file.h>
#include <linux/clk.h>
-extern void (*cpu_wait) (void);
-
struct clk;
struct clk_ops {
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
new file mode 100644
index 0000000..d192158
--- /dev/null
+++ b/arch/mips/include/asm/idle.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_IDLE_H
+#define __ASM_IDLE_H
+
+#include <linux/linkage.h>
+
+extern void (*cpu_wait)(void);
+extern void r4k_wait(void);
+extern asmlinkage void __r4k_wait(void);
+extern void r4k_wait_irqoff(void);
+extern void __pastwait(void);
+
+static inline int using_rollback_handler(void)
+{
+ return cpu_wait == r4k_wait;
+}
+
+static inline int address_is_in_r4k_wait_irqoff(unsigned long addr)
+{
+ return addr >= (unsigned long)r4k_wait_irqoff &&
+ addr < (unsigned long)__pastwait;
+}
+
+#endif /* __ASM_IDLE_H */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index ec1ca53..f59552f 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -171,14 +171,13 @@
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) \
-({ \
- unsigned long __pfn = (pfn); \
- /* avoid <linux/bootmem.h> include hell */ \
- extern unsigned long min_low_pfn; \
- \
- __pfn >= min_low_pfn && __pfn < max_mapnr; \
-})
+static inline int pfn_valid(unsigned long pfn)
+{
+ /* avoid <linux/mm.h> include hell */
+ extern unsigned long max_mapnr;
+
+ return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+}
#elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 71686c8..1470b7b 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -28,7 +28,6 @@
/*
* System setup and hardware flags..
*/
-extern void (*cpu_wait)(void);
extern unsigned int vced_count, vcei_count;
diff --git a/arch/mips/include/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h
similarity index 100%
rename from arch/mips/include/asm/kvm.h
rename to arch/mips/include/uapi/asm/kvm.h
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 16338b8..1dee279 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -694,16 +694,17 @@
#define __NR_process_vm_writev (__NR_Linux + 305)
#define __NR_kcmp (__NR_Linux + 306)
#define __NR_finit_module (__NR_Linux + 307)
+#define __NR_getdents64 (__NR_Linux + 308)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 307
+#define __NR_Linux_syscalls 308
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 307
+#define __NR_64_Linux_syscalls 308
#if _MIPS_SIM == _MIPS_SIM_NABI32
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 6ad9e04..423d871 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -4,7 +4,7 @@
extra-y := head.o vmlinux.lds
-obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
+obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
prom.o ptrace.o reset.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o watch.o vdso.o
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 4bbffdb..c6568bf 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -27,105 +27,6 @@
#include <asm/spram.h>
#include <asm/uaccess.h>
-/*
- * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
- * the implementation of the "wait" feature differs between CPU families. This
- * points to the function that implements CPU specific wait.
- * The wait instruction stops the pipeline and reduces the power consumption of
- * the CPU very much.
- */
-void (*cpu_wait)(void);
-EXPORT_SYMBOL(cpu_wait);
-
-static void r3081_wait(void)
-{
- unsigned long cfg = read_c0_conf();
- write_c0_conf(cfg | R30XX_CONF_HALT);
-}
-
-static void r39xx_wait(void)
-{
- local_irq_disable();
- if (!need_resched())
- write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
- local_irq_enable();
-}
-
-extern void r4k_wait(void);
-
-/*
- * This variant is preferable as it allows testing need_resched and going to
- * sleep depending on the outcome atomically. Unfortunately the "It is
- * implementation-dependent whether the pipeline restarts when a non-enabled
- * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
- * using this version a gamble.
- */
-void r4k_wait_irqoff(void)
-{
- local_irq_disable();
- if (!need_resched())
- __asm__(" .set push \n"
- " .set mips3 \n"
- " wait \n"
- " .set pop \n");
- local_irq_enable();
- __asm__(" .globl __pastwait \n"
- "__pastwait: \n");
-}
-
-/*
- * The RM7000 variant has to handle erratum 38. The workaround is to not
- * have any pending stores when the WAIT instruction is executed.
- */
-static void rm7k_wait_irqoff(void)
-{
- local_irq_disable();
- if (!need_resched())
- __asm__(
- " .set push \n"
- " .set mips3 \n"
- " .set noat \n"
- " mfc0 $1, $12 \n"
- " sync \n"
- " mtc0 $1, $12 # stalls until W stage \n"
- " wait \n"
- " mtc0 $1, $12 # stalls until W stage \n"
- " .set pop \n");
- local_irq_enable();
-}
-
-/*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
- */
-static void au1k_wait(void)
-{
- __asm__(" .set mips3 \n"
- " cache 0x14, 0(%0) \n"
- " cache 0x14, 32(%0) \n"
- " sync \n"
- " nop \n"
- " wait \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " .set mips0 \n"
- : : "r" (au1k_wait));
-}
-
-static int __initdata nowait;
-
-static int __init wait_disable(char *s)
-{
- nowait = 1;
-
- return 1;
-}
-
-__setup("nowait", wait_disable);
-
static int __cpuinitdata mips_fpu_disabled;
static int __init fpu_disable(char *s)
@@ -150,105 +51,6 @@
__setup("nodsp", dsp_disable);
-void __init check_wait(void)
-{
- struct cpuinfo_mips *c = ¤t_cpu_data;
-
- if (nowait) {
- printk("Wait instruction disabled.\n");
- return;
- }
-
- switch (c->cputype) {
- case CPU_R3081:
- case CPU_R3081E:
- cpu_wait = r3081_wait;
- break;
- case CPU_TX3927:
- cpu_wait = r39xx_wait;
- break;
- case CPU_R4200:
-/* case CPU_R4300: */
- case CPU_R4600:
- case CPU_R4640:
- case CPU_R4650:
- case CPU_R4700:
- case CPU_R5000:
- case CPU_R5500:
- case CPU_NEVADA:
- case CPU_4KC:
- case CPU_4KEC:
- case CPU_4KSC:
- case CPU_5KC:
- case CPU_25KF:
- case CPU_PR4450:
- case CPU_BMIPS3300:
- case CPU_BMIPS4350:
- case CPU_BMIPS4380:
- case CPU_BMIPS5000:
- case CPU_CAVIUM_OCTEON:
- case CPU_CAVIUM_OCTEON_PLUS:
- case CPU_CAVIUM_OCTEON2:
- case CPU_JZRISC:
- case CPU_LOONGSON1:
- case CPU_XLR:
- case CPU_XLP:
- cpu_wait = r4k_wait;
- break;
-
- case CPU_RM7000:
- cpu_wait = rm7k_wait_irqoff;
- break;
-
- case CPU_M14KC:
- case CPU_M14KEC:
- case CPU_24K:
- case CPU_34K:
- case CPU_1004K:
- cpu_wait = r4k_wait;
- if (read_c0_config7() & MIPS_CONF7_WII)
- cpu_wait = r4k_wait_irqoff;
- break;
-
- case CPU_74K:
- cpu_wait = r4k_wait;
- if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
- cpu_wait = r4k_wait_irqoff;
- break;
-
- case CPU_TX49XX:
- cpu_wait = r4k_wait_irqoff;
- break;
- case CPU_ALCHEMY:
- cpu_wait = au1k_wait;
- break;
- case CPU_20KC:
- /*
- * WAIT on Rev1.0 has E1, E2, E3 and E16.
- * WAIT on Rev2.0 and Rev3.0 has E16.
- * Rev3.1 WAIT is nop, why bother
- */
- if ((c->processor_id & 0xff) <= 0x64)
- break;
-
- /*
- * Another rev is incremeting c0_count at a reduced clock
- * rate while in WAIT mode. So we basically have the choice
- * between using the cp0 timer as clocksource or avoiding
- * the WAIT instruction. Until more details are known,
- * disable the use of WAIT for 20Kc entirely.
- cpu_wait = r4k_wait;
- */
- break;
- case CPU_RM9000:
- if ((c->processor_id & 0x00ff) >= 0x40)
- cpu_wait = r4k_wait;
- break;
- default:
- break;
- }
-}
-
static inline void check_errata(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 9098829..31fa856 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -122,7 +122,7 @@
__FINIT
.align 5 /* 32 byte rollback region */
-LEAF(r4k_wait)
+LEAF(__r4k_wait)
.set push
.set noreorder
/* start of rollback region */
@@ -146,14 +146,14 @@
jr ra
nop
.set pop
- END(r4k_wait)
+ END(__r4k_wait)
.macro BUILD_ROLLBACK_PROLOGUE handler
FEXPORT(rollback_\handler)
.set push
.set noat
MFC0 k0, CP0_EPC
- PTR_LA k1, r4k_wait
+ PTR_LA k1, __r4k_wait
ori k0, 0x1f /* 32 byte rollback region */
xori k0, 0x1f
bne k0, k1, 9f
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
new file mode 100644
index 0000000..3b09b88
--- /dev/null
+++ b/arch/mips/kernel/idle.c
@@ -0,0 +1,244 @@
+/*
+ * MIPS idle loop and WAIT instruction support.
+ *
+ * Copyright (C) xxxx the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/printk.h>
+#include <linux/sched.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
+
+/*
+ * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
+ * the implementation of the "wait" feature differs between CPU families. This
+ * points to the function that implements CPU specific wait.
+ * The wait instruction stops the pipeline and reduces the power consumption of
+ * the CPU very much.
+ */
+void (*cpu_wait)(void);
+EXPORT_SYMBOL(cpu_wait);
+
+static void r3081_wait(void)
+{
+ unsigned long cfg = read_c0_conf();
+ write_c0_conf(cfg | R30XX_CONF_HALT);
+ local_irq_enable();
+}
+
+static void r39xx_wait(void)
+{
+ if (!need_resched())
+ write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+ local_irq_enable();
+}
+
+void r4k_wait(void)
+{
+ local_irq_enable();
+ __r4k_wait();
+}
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically. Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+void r4k_wait_irqoff(void)
+{
+ if (!need_resched())
+ __asm__(
+ " .set push \n"
+ " .set mips3 \n"
+ " wait \n"
+ " .set pop \n");
+ local_irq_enable();
+ __asm__(
+ " .globl __pastwait \n"
+ "__pastwait: \n");
+}
+
+/*
+ * The RM7000 variant has to handle erratum 38. The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+ if (!need_resched())
+ __asm__(
+ " .set push \n"
+ " .set mips3 \n"
+ " .set noat \n"
+ " mfc0 $1, $12 \n"
+ " sync \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " wait \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " .set pop \n");
+ local_irq_enable();
+}
+
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
+static void au1k_wait(void)
+{
+ __asm__(
+ " .set mips3 \n"
+ " cache 0x14, 0(%0) \n"
+ " cache 0x14, 32(%0) \n"
+ " sync \n"
+ " nop \n"
+ " wait \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " .set mips0 \n"
+ : : "r" (au1k_wait));
+ local_irq_enable();
+}
+
+static int __initdata nowait;
+
+static int __init wait_disable(char *s)
+{
+ nowait = 1;
+
+ return 1;
+}
+
+__setup("nowait", wait_disable);
+
+void __init check_wait(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ if (nowait) {
+ printk("Wait instruction disabled.\n");
+ return;
+ }
+
+ switch (c->cputype) {
+ case CPU_R3081:
+ case CPU_R3081E:
+ cpu_wait = r3081_wait;
+ break;
+ case CPU_TX3927:
+ cpu_wait = r39xx_wait;
+ break;
+ case CPU_R4200:
+/* case CPU_R4300: */
+ case CPU_R4600:
+ case CPU_R4640:
+ case CPU_R4650:
+ case CPU_R4700:
+ case CPU_R5000:
+ case CPU_R5500:
+ case CPU_NEVADA:
+ case CPU_4KC:
+ case CPU_4KEC:
+ case CPU_4KSC:
+ case CPU_5KC:
+ case CPU_25KF:
+ case CPU_PR4450:
+ case CPU_BMIPS3300:
+ case CPU_BMIPS4350:
+ case CPU_BMIPS4380:
+ case CPU_BMIPS5000:
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ case CPU_JZRISC:
+ case CPU_LOONGSON1:
+ case CPU_XLR:
+ case CPU_XLP:
+ cpu_wait = r4k_wait;
+ break;
+
+ case CPU_RM7000:
+ cpu_wait = rm7k_wait_irqoff;
+ break;
+
+ case CPU_M14KC:
+ case CPU_M14KEC:
+ case CPU_24K:
+ case CPU_34K:
+ case CPU_1004K:
+ cpu_wait = r4k_wait;
+ if (read_c0_config7() & MIPS_CONF7_WII)
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
+ case CPU_74K:
+ cpu_wait = r4k_wait;
+ if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
+ case CPU_TX49XX:
+ cpu_wait = r4k_wait_irqoff;
+ break;
+ case CPU_ALCHEMY:
+ cpu_wait = au1k_wait;
+ break;
+ case CPU_20KC:
+ /*
+ * WAIT on Rev1.0 has E1, E2, E3 and E16.
+ * WAIT on Rev2.0 and Rev3.0 has E16.
+ * Rev3.1 WAIT is nop, why bother
+ */
+ if ((c->processor_id & 0xff) <= 0x64)
+ break;
+
+ /*
+ * Another rev is incremeting c0_count at a reduced clock
+ * rate while in WAIT mode. So we basically have the choice
+ * between using the cp0 timer as clocksource or avoiding
+ * the WAIT instruction. Until more details are known,
+ * disable the use of WAIT for 20Kc entirely.
+ cpu_wait = r4k_wait;
+ */
+ break;
+ case CPU_RM9000:
+ if ((c->processor_id & 0x00ff) >= 0x40)
+ cpu_wait = r4k_wait;
+ break;
+ default:
+ break;
+ }
+}
+
+static void smtc_idle_hook(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ void smtc_idle_loop_hook(void);
+
+ smtc_idle_loop_hook();
+#endif
+}
+
+void arch_cpu_idle(void)
+{
+ smtc_idle_hook();
+ if (cpu_wait)
+ cpu_wait();
+ else
+ local_irq_enable();
+}
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 12bc4eb..1f8187a 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -207,7 +207,10 @@
void __kprobes arch_remove_kprobe(struct kprobe *p)
{
- free_insn_slot(p->ainsn.insn, 0);
+ if (p->ainsn.insn) {
+ free_insn_slot(p->ainsn.insn, 0);
+ p->ainsn.insn = NULL;
+ }
}
static void save_previous_kprobe(struct kprobe_ctlblk *kcb)
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index a3e4614..acb3437 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -10,6 +10,7 @@
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
+#include <asm/idle.h>
#include <asm/mipsregs.h>
#include <asm/processor.h>
#include <asm/prom.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a682a87..c6a041d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -51,19 +51,6 @@
}
#endif
-void arch_cpu_idle(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
- extern void smtc_idle_loop_hook(void);
-
- smtc_idle_loop_hook();
-#endif
- if (cpu_wait)
- (*cpu_wait)();
- else
- local_irq_enable();
-}
-
asmlinkage void ret_from_fork(void);
asmlinkage void ret_from_kernel_thread(void);
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 36cfd40..97a5909 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -423,4 +423,5 @@
PTR sys_process_vm_writev /* 5305 */
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_getdents64
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index c17619f..6e7862a 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -37,6 +37,7 @@
#include <linux/atomic.h>
#include <asm/cpu.h>
#include <asm/processor.h>
+#include <asm/idle.h>
#include <asm/r4k-timer.h>
#include <asm/mmu_context.h>
#include <asm/time.h>
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 7186222..75a4fd7 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -34,6 +34,7 @@
#include <asm/hardirq.h>
#include <asm/hazards.h>
#include <asm/irq.h>
+#include <asm/idle.h>
#include <asm/mmu_context.h>
#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
@@ -858,7 +859,6 @@
unsigned long flags;
int mtflags;
unsigned long tcrestart;
- extern void r4k_wait_irqoff(void), __pastwait(void);
int set_resched_flag = (type == LINUX_SMP_IPI &&
action == SMP_RESCHEDULE_YOURSELF);
@@ -914,8 +914,7 @@
*/
if (cpu_wait == r4k_wait_irqoff) {
tcrestart = read_tc_c0_tcrestart();
- if (tcrestart >= (unsigned long)r4k_wait_irqoff
- && tcrestart < (unsigned long)__pastwait) {
+ if (address_is_in_r4k_wait_irqoff(tcrestart)) {
write_tc_c0_tcrestart(__pastwait);
tcstatus &= ~TCSTATUS_IXMT;
write_tc_c0_tcstatus(tcstatus);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb14db3..e3be670 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -41,6 +41,7 @@
#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
+#include <asm/idle.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/module.h>
@@ -57,7 +58,6 @@
#include <asm/uasm.h>
extern void check_wait(void);
-extern asmlinkage void r4k_wait(void);
extern asmlinkage void rollback_handle_int(void);
extern asmlinkage void handle_int(void);
extern u32 handle_tlbl[];
@@ -1542,7 +1542,7 @@
extern char except_vec_vi, except_vec_vi_lui;
extern char except_vec_vi_ori, except_vec_vi_end;
extern char rollback_except_vec_vi;
- char *vec_start = (cpu_wait == r4k_wait) ?
+ char *vec_start = using_rollback_handler() ?
&rollback_except_vec_vi : &except_vec_vi;
#ifdef CONFIG_MIPS_MT_SMTC
/*
@@ -1812,10 +1812,8 @@
extern char except_vec4;
extern char except_vec3_r4000;
unsigned long i;
- int rollback;
check_wait();
- rollback = (cpu_wait == r4k_wait);
#if defined(CONFIG_KGDB)
if (kgdb_early_setup)
@@ -1892,7 +1890,8 @@
if (board_be_init)
board_be_init();
- set_except_vector(0, rollback ? rollback_handle_int : handle_int);
+ set_except_vector(0, using_rollback_handler() ? rollback_handle_int
+ : handle_int);
set_except_vector(1, handle_tlbm);
set_except_vector(2, handle_tlbl);
set_except_vector(3, handle_tlbs);
diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c
index e3f0d9b..c777dd3 100644
--- a/arch/mips/kvm/kvm_tlb.c
+++ b/arch/mips/kvm/kvm_tlb.c
@@ -17,6 +17,8 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kvm_host.h>
+#include <linux/srcu.h>
+
#include <asm/cpu.h>
#include <asm/bootinfo.h>
@@ -169,21 +171,27 @@
}
}
-static void kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
+static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
{
+ int srcu_idx, err = 0;
pfn_t pfn;
if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE)
- return;
+ return 0;
+ srcu_idx = srcu_read_lock(&kvm->srcu);
pfn = kvm_mips_gfn_to_pfn(kvm, gfn);
if (kvm_mips_is_error_pfn(pfn)) {
- panic("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn);
+ kvm_err("Couldn't get pfn for gfn %#" PRIx64 "!\n", gfn);
+ err = -EFAULT;
+ goto out;
}
kvm->arch.guest_pmap[gfn] = pfn;
- return;
+out:
+ srcu_read_unlock(&kvm->srcu, srcu_idx);
+ return err;
}
/* Translate guest KSEG0 addresses to Host PA */
@@ -207,7 +215,10 @@
gva);
return KVM_INVALID_PAGE;
}
- kvm_mips_map_page(vcpu->kvm, gfn);
+
+ if (kvm_mips_map_page(vcpu->kvm, gfn) < 0)
+ return KVM_INVALID_ADDR;
+
return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset;
}
@@ -310,8 +321,11 @@
even = !(gfn & 0x1);
vaddr = badvaddr & (PAGE_MASK << 1);
- kvm_mips_map_page(vcpu->kvm, gfn);
- kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1);
+ if (kvm_mips_map_page(vcpu->kvm, gfn) < 0)
+ return -1;
+
+ if (kvm_mips_map_page(vcpu->kvm, gfn ^ 0x1) < 0)
+ return -1;
if (even) {
pfn0 = kvm->arch.guest_pmap[gfn];
@@ -389,8 +403,11 @@
pfn0 = 0;
pfn1 = 0;
} else {
- kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT);
- kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT);
+ if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT) < 0)
+ return -1;
+
+ if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT) < 0)
+ return -1;
pfn0 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo0) >> PAGE_SHIFT];
pfn1 = kvm->arch.guest_pmap[mips3_tlbpfn_to_paddr(tlb->tlb_lo1) >> PAGE_SHIFT];
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 35c8c64..65bfbb5 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/pm.h>
+#include <asm/idle.h>
#include <asm/reboot.h>
#include <loongson.h>
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
index d4f610f..547f34b 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson1/common/reset.c
@@ -9,6 +9,7 @@
#include <linux/io.h>
#include <linux/pm.h>
+#include <asm/idle.h>
#include <asm/reboot.h>
#include <loongson1.h>
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index af31914..eaa99d2 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -37,6 +37,7 @@
#include <linux/pm.h>
#include <linux/bootmem.h>
+#include <asm/idle.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index e3e0941..89c8c10 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -36,6 +36,7 @@
#include <linux/serial_8250.h>
#include <linux/pm.h>
+#include <asm/idle.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
index 1651cfd..396b296 100644
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -12,6 +12,7 @@
#include <asm/bootinfo.h>
#include <asm/cacheflush.h>
+#include <asm/idle.h>
#include <asm/r4kcache.h>
#include <asm/reboot.h>
#include <asm/smp-ops.h>
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 5364aab..681e7f8 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/irq.h>
#include <asm/bootinfo.h>
+#include <asm/idle.h>
#include <asm/time.h>
#include <asm/reboot.h>
#include <asm/r4kcache.h>
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 70a3f90..d7f7558 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -27,6 +27,7 @@
#include <asm/cacheflush.h>
#include <asm/cpu.h>
+#include <asm/idle.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/reboot.h>
diff --git a/arch/mips/wrppmc/reset.c b/arch/mips/wrppmc/reset.c
index cc5474b..80beb18 100644
--- a/arch/mips/wrppmc/reset.c
+++ b/arch/mips/wrppmc/reset.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <asm/cacheflush.h>
+#include <asm/idle.h>
#include <asm/mipsregs.h>
#include <asm/processor.h>
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f791962..139a830 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -136,7 +136,6 @@
CONFIG_USB_HIDDEV=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 8b11b5b..2c1d8cb 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -174,6 +174,8 @@
/* Get the pointer to a device_node's pci_dn */
#define PCI_DN(dn) ((struct pci_dn *) (dn)->data)
+extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
+
extern void * update_dn_pci_info(struct device_node *dn, void *data);
static inline int pci_device_from_OF_node(struct device_node *np,
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index d7e67ca..594db6b 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -284,6 +284,12 @@
unsigned long ebbrr;
unsigned long ebbhr;
unsigned long bescr;
+ unsigned long siar;
+ unsigned long sdar;
+ unsigned long sier;
+ unsigned long mmcr0;
+ unsigned long mmcr2;
+ unsigned long mmcra;
#endif
};
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b51a97c..6f16ffa 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -127,6 +127,12 @@
DEFINE(THREAD_BESCR, offsetof(struct thread_struct, bescr));
DEFINE(THREAD_EBBHR, offsetof(struct thread_struct, ebbhr));
DEFINE(THREAD_EBBRR, offsetof(struct thread_struct, ebbrr));
+ DEFINE(THREAD_SIAR, offsetof(struct thread_struct, siar));
+ DEFINE(THREAD_SDAR, offsetof(struct thread_struct, sdar));
+ DEFINE(THREAD_SIER, offsetof(struct thread_struct, sier));
+ DEFINE(THREAD_MMCR0, offsetof(struct thread_struct, mmcr0));
+ DEFINE(THREAD_MMCR2, offsetof(struct thread_struct, mmcr2));
+ DEFINE(THREAD_MMCRA, offsetof(struct thread_struct, mmcra));
#endif
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
DEFINE(PACATMSCRATCH, offsetof(struct paca_struct, tm_scratch));
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index a283b64..18b5b9c 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -135,8 +135,12 @@
blr
__init_TLB:
- /* Clear the TLB */
- li r6,128
+ /*
+ * Clear the TLB using the "IS 3" form of tlbiel instruction
+ * (invalidate by congruence class). P7 has 128 CCs, P8 has 512
+ * so we just always do 512
+ */
+ li r6,512
mtctr r6
li r7,0xc00 /* IS field = 0b11 */
ptesync
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 51cfb8f..0e9095e 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -465,6 +465,20 @@
std r0, THREAD_EBBHR(r3)
mfspr r0, SPRN_EBBRR
std r0, THREAD_EBBRR(r3)
+
+ /* PMU registers made user read/(write) by EBB */
+ mfspr r0, SPRN_SIAR
+ std r0, THREAD_SIAR(r3)
+ mfspr r0, SPRN_SDAR
+ std r0, THREAD_SDAR(r3)
+ mfspr r0, SPRN_SIER
+ std r0, THREAD_SIER(r3)
+ mfspr r0, SPRN_MMCR0
+ std r0, THREAD_MMCR0(r3)
+ mfspr r0, SPRN_MMCR2
+ std r0, THREAD_MMCR2(r3)
+ mfspr r0, SPRN_MMCRA
+ std r0, THREAD_MMCRA(r3)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
#endif
@@ -560,6 +574,20 @@
ld r0, THREAD_EBBRR(r4)
mtspr SPRN_EBBRR, r0
+ /* PMU registers made user read/(write) by EBB */
+ ld r0, THREAD_SIAR(r4)
+ mtspr SPRN_SIAR, r0
+ ld r0, THREAD_SDAR(r4)
+ mtspr SPRN_SDAR, r0
+ ld r0, THREAD_SIER(r4)
+ mtspr SPRN_SIER, r0
+ ld r0, THREAD_MMCR0(r4)
+ mtspr SPRN_MMCR0, r0
+ ld r0, THREAD_MMCR2(r4)
+ mtspr SPRN_MMCR2, r0
+ ld r0, THREAD_MMCRA(r4)
+ mtspr SPRN_MMCRA, r0
+
ld r0,THREAD_TAR(r4)
mtspr SPRN_TAR,r0
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 6053f03..e9acf50 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1520,9 +1520,10 @@
for (i = 0; i < 3; ++i) {
res = &hose->mem_resources[i];
if (!res->flags) {
- printk(KERN_ERR "PCI: Memory resource 0 not set for "
- "host bridge %s (domain %d)\n",
- hose->dn->full_name, hose->global_number);
+ if (i == 0)
+ printk(KERN_ERR "PCI: Memory resource 0 not set for "
+ "host bridge %s (domain %d)\n",
+ hose->dn->full_name, hose->global_number);
continue;
}
offset = hose->mem_offset[i];
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 873050d..2e86296 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -266,3 +266,13 @@
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
+
+static void quirk_radeon_32bit_msi(struct pci_dev *dev)
+{
+ struct pci_dn *pdn = pci_get_pdn(dev);
+
+ if (pdn)
+ pdn->force_32bit_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi);
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index e7af165..df03844 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -32,6 +32,14 @@
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
+struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
+{
+ struct device_node *dn = pci_device_to_OF_node(pdev);
+ if (!dn)
+ return NULL;
+ return PCI_DN(dn);
+}
+
/*
* Traverse_func that inits the PCI fields of the device node.
* NOTE: this *must* be done before read/write config to the device.
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index d3e840d..c24684c 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -6,6 +6,7 @@
select PPC_ICP_NATIVE
select PPC_P7_NAP
select PPC_PCI_CHOICE if EMBEDDED
+ select EPAPR_BOOT
default y
config POWERNV_MSI
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 3937aaa..9c9d15e 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -68,16 +68,6 @@
define_pe_printk_level(pe_warn, KERN_WARNING);
define_pe_printk_level(pe_info, KERN_INFO);
-static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
-{
- struct device_node *np;
-
- np = pci_device_to_OF_node(dev);
- if (!np)
- return NULL;
- return PCI_DN(np);
-}
-
static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
{
unsigned long pe;
@@ -110,7 +100,7 @@
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
struct pnv_phb *phb = hose->private_data;
- struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ struct pci_dn *pdn = pci_get_pdn(dev);
if (!pdn)
return NULL;
@@ -173,7 +163,7 @@
/* Add to all parents PELT-V */
while (parent) {
- struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
+ struct pci_dn *pdn = pci_get_pdn(parent);
if (pdn && pdn->pe_number != IODA_INVALID_PE) {
rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
@@ -252,7 +242,7 @@
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
struct pnv_phb *phb = hose->private_data;
- struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ struct pci_dn *pdn = pci_get_pdn(dev);
struct pnv_ioda_pe *pe;
int pe_num;
@@ -323,7 +313,7 @@
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
- struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ struct pci_dn *pdn = pci_get_pdn(dev);
if (pdn == NULL) {
pr_warn("%s: No device node associated with device !\n",
@@ -436,7 +426,7 @@
static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
{
- struct pci_dn *pdn = pnv_ioda_get_pdn(pdev);
+ struct pci_dn *pdn = pci_get_pdn(pdev);
struct pnv_ioda_pe *pe;
/*
@@ -768,6 +758,7 @@
unsigned int is_64, struct msi_msg *msg)
{
struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+ struct pci_dn *pdn = pci_get_pdn(dev);
struct irq_data *idata;
struct irq_chip *ichip;
unsigned int xive_num = hwirq - phb->msi_base;
@@ -783,6 +774,10 @@
if (pe->mve_number < 0)
return -ENXIO;
+ /* Force 32-bit MSI on some broken devices */
+ if (pdn && pdn->force_32bit_msi)
+ is_64 = 0;
+
/* Assign XIVE to PE */
rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
if (rc) {
@@ -1035,7 +1030,7 @@
if (!phb->initialized)
return 0;
- pdn = pnv_ioda_get_pdn(dev);
+ pdn = pci_get_pdn(dev);
if (!pdn || pdn->pe_number == IODA_INVALID_PE)
return -EINVAL;
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 163bd74..277343c 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -47,6 +47,10 @@
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pci_get_pdn(pdev);
+
+ if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
+ return -ENODEV;
return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
}
@@ -367,7 +371,7 @@
while (npages--)
*(tcep++) = 0;
- if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+ if (tbl->it_type & TCE_PCI_SWINV_FREE)
pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1);
}
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 420524e..6d2f0ab 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -26,26 +26,6 @@
#define RTAS_CHANGE_MSIX_FN 4
#define RTAS_CHANGE_32MSI_FN 5
-static struct pci_dn *get_pdn(struct pci_dev *pdev)
-{
- struct device_node *dn;
- struct pci_dn *pdn;
-
- dn = pci_device_to_OF_node(pdev);
- if (!dn) {
- dev_dbg(&pdev->dev, "rtas_msi: No OF device node\n");
- return NULL;
- }
-
- pdn = PCI_DN(dn);
- if (!pdn) {
- dev_dbg(&pdev->dev, "rtas_msi: No PCI DN\n");
- return NULL;
- }
-
- return pdn;
-}
-
/* RTAS Helpers */
static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs)
@@ -91,7 +71,7 @@
{
struct pci_dn *pdn;
- pdn = get_pdn(pdev);
+ pdn = pci_get_pdn(pdev);
if (!pdn)
return;
@@ -152,7 +132,7 @@
struct pci_dn *pdn;
const u32 *req_msi;
- pdn = get_pdn(pdev);
+ pdn = pci_get_pdn(pdev);
if (!pdn)
return -ENODEV;
@@ -394,6 +374,23 @@
return 0;
}
+static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev)
+{
+ u32 addr_hi, addr_lo;
+
+ /*
+ * We should only get in here for IODA1 configs. This is based on the
+ * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS
+ * support, and we are in a PCIe Gen2 slot.
+ */
+ dev_info(&pdev->dev,
+ "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n");
+ pci_read_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, &addr_hi);
+ addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4);
+ pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO, addr_lo);
+ pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI, 0);
+}
+
static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
{
struct pci_dn *pdn;
@@ -401,8 +398,9 @@
struct msi_desc *entry;
struct msi_msg msg;
int nvec = nvec_in;
+ int use_32bit_msi_hack = 0;
- pdn = get_pdn(pdev);
+ pdn = pci_get_pdn(pdev);
if (!pdn)
return -ENODEV;
@@ -428,15 +426,31 @@
*/
again:
if (type == PCI_CAP_ID_MSI) {
- if (pdn->force_32bit_msi)
+ if (pdn->force_32bit_msi) {
rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
- else
+ if (rc < 0) {
+ /*
+ * We only want to run the 32 bit MSI hack below if
+ * the max bus speed is Gen2 speed
+ */
+ if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT)
+ return rc;
+
+ use_32bit_msi_hack = 1;
+ }
+ } else
+ rc = -1;
+
+ if (rc < 0)
rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
- if (rc < 0 && !pdn->force_32bit_msi) {
+ if (rc < 0) {
pr_debug("rtas_msi: trying the old firmware call.\n");
rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec);
}
+
+ if (use_32bit_msi_hack && rc > 0)
+ rtas_hack_32bit_msi_gen2(pdev);
} else
rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec);
@@ -518,12 +532,3 @@
}
arch_initcall(rtas_msi_init);
-static void quirk_radeon(struct pci_dev *dev)
-{
- struct pci_dn *pdn = get_pdn(dev);
-
- if (pdn)
- pdn->force_32bit_msi = 1;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2c9789d..da183c5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -98,7 +98,6 @@
select CLONE_BACKWARDS2
select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES if !SMP
- select GENERIC_KERNEL_THREAD
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL_OLD
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index b7931fa..bf246da 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -9,11 +9,6 @@
#define MCOUNT_ADDR ((long)_mcount)
-#ifdef CONFIG_64BIT
-#define MCOUNT_INSN_SIZE 12
-#else
-#define MCOUNT_INSN_SIZE 20
-#endif
static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
@@ -21,4 +16,11 @@
}
#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_64BIT
+#define MCOUNT_INSN_SIZE 12
+#else
+#define MCOUNT_INSN_SIZE 22
+#endif
+
#endif /* _ASM_S390_FTRACE_H */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 75ce9b0..5d64fb7 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -32,7 +32,7 @@
void storage_key_init_range(unsigned long start, unsigned long end);
-static unsigned long pfmf(unsigned long function, unsigned long address)
+static inline unsigned long pfmf(unsigned long function, unsigned long address)
{
asm volatile(
" .insn rre,0xb9af0000,%[function],%[address]"
@@ -44,17 +44,13 @@
static inline void clear_page(void *page)
{
- if (MACHINE_HAS_PFMF) {
- pfmf(0x10000, (unsigned long)page);
- } else {
- register unsigned long reg1 asm ("1") = 0;
- register void *reg2 asm ("2") = page;
- register unsigned long reg3 asm ("3") = 4096;
- asm volatile(
- " mvcl 2,0"
- : "+d" (reg2), "+d" (reg3) : "d" (reg1)
- : "memory", "cc");
- }
+ register unsigned long reg1 asm ("1") = 0;
+ register void *reg2 asm ("2") = page;
+ register unsigned long reg3 asm ("3") = 4096;
+ asm volatile(
+ " mvcl 2,0"
+ : "+d" (reg2), "+d" (reg3) : "d" (reg1)
+ : "memory", "cc");
}
static inline void copy_page(void *to, void *from)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 4105b82..0f0de30 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -306,7 +306,7 @@
#define RCP_HC_BIT 0x00200000UL
#define RCP_GR_BIT 0x00040000UL
#define RCP_GC_BIT 0x00020000UL
-#define RCP_IN_BIT 0x00008000UL /* IPTE notify bit */
+#define RCP_IN_BIT 0x00002000UL /* IPTE notify bit */
/* User dirty / referenced bit for KVM's migration feature */
#define KVM_UR_BIT 0x00008000UL
@@ -374,7 +374,7 @@
#define RCP_HC_BIT 0x0020000000000000UL
#define RCP_GR_BIT 0x0004000000000000UL
#define RCP_GC_BIT 0x0002000000000000UL
-#define RCP_IN_BIT 0x0000800000000000UL /* IPTE notify bit */
+#define RCP_IN_BIT 0x0000200000000000UL /* IPTE notify bit */
/* User dirty / referenced bit for KVM's migration feature */
#define KVM_UR_BIT 0x0000800000000000UL
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index 7f4a4a8..be87d3e 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -1862,6 +1862,8 @@
while (len) {
ptr = buffer;
opsize = insn_length(*code);
+ if (opsize > len)
+ break;
ptr += sprintf(ptr, "%p: ", code);
for (i = 0; i < opsize; i++)
ptr += sprintf(ptr, "%02x", code[i]);
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 78bdf0e..e3043ae 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -16,12 +16,6 @@
#include <trace/syscall.h>
#include <asm/asm-offsets.h>
-#ifdef CONFIG_64BIT
-#define MCOUNT_OFFSET_RET 12
-#else
-#define MCOUNT_OFFSET_RET 22
-#endif
-
#ifdef CONFIG_DYNAMIC_FTRACE
void ftrace_disable_code(void);
@@ -155,9 +149,10 @@
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
goto out;
+ ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
goto out;
- trace.func = (ip & PSW_ADDR_INSN) - MCOUNT_OFFSET_RET;
+ trace.func = ip;
/* Only trace if the calling function expects to. */
if (!ftrace_graph_entry(&trace)) {
current->curr_ret_stack--;
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 4567ce2..08dcf21 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -7,6 +7,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
+#include <asm/ftrace.h>
.section .kprobes.text, "ax"
@@ -33,6 +34,7 @@
la %r2,0(%r14)
st %r0,__SF_BACKCHAIN(%r15)
la %r3,0(%r3)
+ ahi %r2,-MCOUNT_INSN_SIZE
l %r14,0b-0b(%r1)
l %r14,0(%r14)
basr %r14,%r14
diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S
index 1133219..1c52eae 100644
--- a/arch/s390/kernel/mcount64.S
+++ b/arch/s390/kernel/mcount64.S
@@ -7,6 +7,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
+#include <asm/ftrace.h>
.section .kprobes.text, "ax"
@@ -29,6 +30,7 @@
stg %r1,__SF_BACKCHAIN(%r15)
lgr %r2,%r14
lg %r3,168(%r15)
+ aghi %r2,-MCOUNT_INSN_SIZE
larl %r14,ftrace_trace_function
lg %r14,0(%r14)
basr %r14,%r14
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 8074cb4..05674b6 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -645,7 +645,7 @@
continue;
pcpu = pcpu_devices + cpu;
pcpu->address = info->cpu[i].address;
- pcpu->state = (cpu >= info->configured) ?
+ pcpu->state = (i >= info->configured) ?
CPU_STATE_STANDBY : CPU_STATE_CONFIGURED;
smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN);
set_cpu_present(cpu, true);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 7805ddc..18dc417 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -677,8 +677,7 @@
break;
}
/* Get the page mapped */
- if (get_user_pages(current, gmap->mm, addr, 1, 1, 0,
- NULL, NULL) != 1) {
+ if (fixup_user_fault(current, gmap->mm, addr, FAULT_FLAG_WRITE)) {
rc = -EFAULT;
break;
}
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
index d8f988a..0940682 100644
--- a/arch/score/mm/init.c
+++ b/arch/score/mm/init.c
@@ -41,8 +41,6 @@
unsigned long empty_zero_page;
EXPORT_SYMBOL_GPL(empty_zero_page);
-static struct kcore_list kcore_mem, kcore_vmalloc;
-
static void setup_zero_page(void)
{
struct page *page;
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 0e0fabf..6eb18c4 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -141,11 +141,6 @@
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
- if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
- || devfn == PCI_DEVFN(0, 0)
- || devfn == PCI_DEVFN(3, 0)))
- return 1;
-
/* This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
@@ -155,7 +150,10 @@
*/
if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
return 0;
-
+ if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+ || devfn == PCI_DEVFN(0, 0)
+ || devfn == PCI_DEVFN(3, 0)))
+ return 1;
return 0; /* langwell on others */
}
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 7cad994ee..536562c 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -38,7 +38,6 @@
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o
-acpi-y += csrt.o
acpi-$(CONFIG_X86_INTEL_LPSS) += acpi_lpss.o
acpi-y += acpi_platform.o
acpi-y += power.o
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index b1c9542..652fd5c 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -35,11 +35,16 @@
struct lpss_device_desc {
bool clk_required;
- const char *clk_parent;
+ const char *clkdev_name;
bool ltr_required;
unsigned int prv_offset;
};
+static struct lpss_device_desc lpss_dma_desc = {
+ .clk_required = true,
+ .clkdev_name = "hclk",
+};
+
struct lpss_private_data {
void __iomem *mmio_base;
resource_size_t mmio_size;
@@ -49,7 +54,6 @@
static struct lpss_device_desc lpt_dev_desc = {
.clk_required = true,
- .clk_parent = "lpss_clk",
.prv_offset = 0x800,
.ltr_required = true,
};
@@ -60,6 +64,9 @@
};
static const struct acpi_device_id acpi_lpss_device_ids[] = {
+ /* Generic LPSS devices */
+ { "INTL9C60", (unsigned long)&lpss_dma_desc },
+
/* Lynxpoint LPSS devices */
{ "INT33C0", (unsigned long)&lpt_dev_desc },
{ "INT33C1", (unsigned long)&lpt_dev_desc },
@@ -91,16 +98,27 @@
struct lpss_private_data *pdata)
{
const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+ struct lpss_clk_data *clk_data;
if (!lpss_clk_dev)
lpt_register_clock_device();
- if (!dev_desc->clk_parent || !pdata->mmio_base
+ clk_data = platform_get_drvdata(lpss_clk_dev);
+ if (!clk_data)
+ return -ENODEV;
+
+ if (dev_desc->clkdev_name) {
+ clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name,
+ dev_name(&adev->dev));
+ return 0;
+ }
+
+ if (!pdata->mmio_base
|| pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
return -ENODATA;
pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
- dev_desc->clk_parent, 0,
+ clk_data->name, 0,
pdata->mmio_base + dev_desc->prv_offset,
0, 0, NULL);
if (IS_ERR(pdata->clk))
diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c
deleted file mode 100644
index 5c15a91..0000000
--- a/drivers/acpi/csrt.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Support for Core System Resources Table (CSRT)
- *
- * Copyright (C) 2013, Intel Corporation
- * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
- * Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "ACPI: CSRT: " fmt
-
-#include <linux/acpi.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-ACPI_MODULE_NAME("CSRT");
-
-static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev,
- const struct acpi_csrt_group *grp)
-{
- const struct acpi_csrt_shared_info *si;
- struct resource res[3];
- size_t nres;
- int ret;
-
- memset(res, 0, sizeof(res));
- nres = 0;
-
- si = (const struct acpi_csrt_shared_info *)&grp[1];
- /*
- * The peripherals that are listed on CSRT typically support only
- * 32-bit addresses so we only use the low part of MMIO base for
- * now.
- */
- if (!si->mmio_base_high && si->mmio_base_low) {
- /*
- * There is no size of the memory resource in shared_info
- * so we assume that it is 4k here.
- */
- res[nres].start = si->mmio_base_low;
- res[nres].end = res[0].start + SZ_4K - 1;
- res[nres++].flags = IORESOURCE_MEM;
- }
-
- if (si->gsi_interrupt) {
- int irq = acpi_register_gsi(NULL, si->gsi_interrupt,
- si->interrupt_mode,
- si->interrupt_polarity);
- res[nres].start = irq;
- res[nres].end = irq;
- res[nres++].flags = IORESOURCE_IRQ;
- }
-
- if (si->base_request_line || si->num_handshake_signals) {
- /*
- * We pass the driver a DMA resource describing the range
- * of request lines the device supports.
- */
- res[nres].start = si->base_request_line;
- res[nres].end = res[nres].start + si->num_handshake_signals - 1;
- res[nres++].flags = IORESOURCE_DMA;
- }
-
- ret = platform_device_add_resources(pdev, res, nres);
- if (ret) {
- if (si->gsi_interrupt)
- acpi_unregister_gsi(si->gsi_interrupt);
- return ret;
- }
-
- return 0;
-}
-
-static int __init
-acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp)
-{
- struct platform_device *pdev;
- char vendor[5], name[16];
- int ret, i;
-
- vendor[0] = grp->vendor_id;
- vendor[1] = grp->vendor_id >> 8;
- vendor[2] = grp->vendor_id >> 16;
- vendor[3] = grp->vendor_id >> 24;
- vendor[4] = '\0';
-
- if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
- return -ENODEV;
-
- snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id);
- pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO);
- if (!pdev)
- return -ENOMEM;
-
- /* Add resources based on the shared info */
- ret = acpi_csrt_parse_shared_info(pdev, grp);
- if (ret)
- goto fail;
-
- ret = platform_device_add(pdev);
- if (ret)
- goto fail;
-
- for (i = 0; i < pdev->num_resources; i++)
- dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]);
-
- return 0;
-
-fail:
- platform_device_put(pdev);
- return ret;
-}
-
-/*
- * CSRT or Core System Resources Table is a proprietary ACPI table
- * introduced by Microsoft. This table can contain devices that are not in
- * the system DSDT table. In particular DMA controllers might be described
- * here.
- *
- * We present these devices as normal platform devices that don't have ACPI
- * IDs or handle. The platform device name will be something like
- * <VENDOR><DEVID>.<n>.auto for example: INTL9C06.0.auto.
- */
-void __init acpi_csrt_init(void)
-{
- struct acpi_csrt_group *grp, *end;
- struct acpi_table_csrt *csrt;
- acpi_status status;
- int ret;
-
- status = acpi_get_table(ACPI_SIG_CSRT, 0,
- (struct acpi_table_header **)&csrt);
- if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND)
- pr_warn("failed to get the CSRT table\n");
- return;
- }
-
- pr_debug("parsing CSRT table for devices\n");
-
- grp = (struct acpi_csrt_group *)(csrt + 1);
- end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
-
- while (grp < end) {
- ret = acpi_csrt_parse_resource_group(grp);
- if (ret) {
- pr_warn("error in parsing resource group: %d\n", ret);
- return;
- }
-
- grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
- }
-}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 6f1afd9..297cbf4 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -35,7 +35,6 @@
void acpi_pci_root_hp_init(void);
void acpi_platform_init(void);
int acpi_sysfs_init(void);
-void acpi_csrt_init(void);
#ifdef CONFIG_ACPI_CONTAINER
void acpi_container_init(void);
#else
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 1dd6f6c..e427dc5 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -641,7 +641,9 @@
/* bus enumerate */
printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
(char *)buffer.pointer);
- if (!root)
+ if (root)
+ acpiphp_check_host_bridge(handle);
+ else
handle_root_bridge_insertion(handle);
break;
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index c1bc608..44225cb 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -2043,7 +2043,6 @@
acpi_pci_link_init();
acpi_platform_init();
acpi_lpss_init();
- acpi_csrt_init();
acpi_container_init();
acpi_memory_hotplug_init();
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 1a68f947..d414331 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -1295,6 +1295,7 @@
return subsys_register(subsys, groups, virtual_dir);
}
+EXPORT_SYMBOL_GPL(subsys_virtual_register);
int __init buses_init(void)
{
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 016312437..2499cef 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -572,9 +572,11 @@
if (dev) {
WARN(((attr->attr.mode & S_IWUGO) && !attr->store),
- "Write permission without 'store'\n");
+ "Attribute %s: write permission without 'store'\n",
+ attr->attr.name);
WARN(((attr->attr.mode & S_IRUGO) && !attr->show),
- "Read permission without 'show'\n");
+ "Attribute %s: read permission without 'show'\n",
+ attr->attr.name);
error = sysfs_create_file(&dev->kobj, &attr->attr);
}
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index bca9c80..8bffa5c 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -84,6 +84,8 @@
{ BCMA_CORE_I2S, "I2S" },
{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
{ BCMA_CORE_SHIM, "SHIM" },
+ { BCMA_CORE_PCIE2, "PCIe Gen2" },
+ { BCMA_CORE_ARM_CR4, "ARM CR4" },
{ BCMA_CORE_DEFAULT, "Default" },
};
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index f1a29f8..9bf4371 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -117,13 +117,13 @@
spin_lock(&brd->brd_lock);
idx = sector >> PAGE_SECTORS_SHIFT;
+ page->index = idx;
if (radix_tree_insert(&brd->brd_pages, idx, page)) {
__free_page(page);
page = radix_tree_lookup(&brd->brd_pages, idx);
BUG_ON(!page);
BUG_ON(page->index != idx);
- } else
- page->index = idx;
+ }
spin_unlock(&brd->brd_lock);
radix_tree_preload_end();
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index f8ef15f..3fd130f 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1160,8 +1160,7 @@
dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
/* device id and bus width */
- of_property_read_u32(dev->dev.of_node, "port-number", &id);
- if (id < 0)
+ if (of_property_read_u32(dev->dev.of_node, "port-number", &id))
id = 0;
if (of_find_property(dev->dev.of_node, "8-bit", NULL))
bus_width = ACE_BUS_WIDTH_8;
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index dafd9ac..0913d79 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -622,9 +622,12 @@
return -EFAULT;
break;
case LPGETSTATUS:
+ if (mutex_lock_interruptible(&lp_table[minor].port_mutex))
+ return -EINTR;
lp_claim_parport_or_block (&lp_table[minor]);
status = r_str(minor);
lp_release_parport (&lp_table[minor]);
+ mutex_unlock(&lp_table[minor].port_mutex);
if (copy_to_user(argp, &status, sizeof(int)))
return -EFAULT;
diff --git a/drivers/char/random.c b/drivers/char/random.c
index cd9a621..35487e8 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -865,16 +865,24 @@
if (r->entropy_count / 8 < min + reserved) {
nbytes = 0;
} else {
+ int entropy_count, orig;
+retry:
+ entropy_count = orig = ACCESS_ONCE(r->entropy_count);
/* If limited, never pull more than available */
- if (r->limit && nbytes + reserved >= r->entropy_count / 8)
- nbytes = r->entropy_count/8 - reserved;
+ if (r->limit && nbytes + reserved >= entropy_count / 8)
+ nbytes = entropy_count/8 - reserved;
- if (r->entropy_count / 8 >= nbytes + reserved)
- r->entropy_count -= nbytes*8;
- else
- r->entropy_count = reserved;
+ if (entropy_count / 8 >= nbytes + reserved) {
+ entropy_count -= nbytes*8;
+ if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
+ goto retry;
+ } else {
+ entropy_count = reserved;
+ if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig)
+ goto retry;
+ }
- if (r->entropy_count < random_write_wakeup_thresh)
+ if (entropy_count < random_write_wakeup_thresh)
wakeup_write = 1;
}
@@ -957,10 +965,23 @@
{
ssize_t ret = 0, i;
__u8 tmp[EXTRACT_SIZE];
+ unsigned long flags;
/* if last_data isn't primed, we need EXTRACT_SIZE extra bytes */
- if (fips_enabled && !r->last_data_init)
- nbytes += EXTRACT_SIZE;
+ if (fips_enabled) {
+ spin_lock_irqsave(&r->lock, flags);
+ if (!r->last_data_init) {
+ r->last_data_init = true;
+ spin_unlock_irqrestore(&r->lock, flags);
+ trace_extract_entropy(r->name, EXTRACT_SIZE,
+ r->entropy_count, _RET_IP_);
+ xfer_secondary_pool(r, EXTRACT_SIZE);
+ extract_buf(r, tmp);
+ spin_lock_irqsave(&r->lock, flags);
+ memcpy(r->last_data, tmp, EXTRACT_SIZE);
+ }
+ spin_unlock_irqrestore(&r->lock, flags);
+ }
trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_);
xfer_secondary_pool(r, nbytes);
@@ -970,19 +991,6 @@
extract_buf(r, tmp);
if (fips_enabled) {
- unsigned long flags;
-
-
- /* prime last_data value if need be, per fips 140-2 */
- if (!r->last_data_init) {
- spin_lock_irqsave(&r->lock, flags);
- memcpy(r->last_data, tmp, EXTRACT_SIZE);
- r->last_data_init = true;
- nbytes -= EXTRACT_SIZE;
- spin_unlock_irqrestore(&r->lock, flags);
- extract_buf(r, tmp);
- }
-
spin_lock_irqsave(&r->lock, flags);
if (!memcmp(tmp, r->last_data, EXTRACT_SIZE))
panic("Hardware RNG duplicated output!\n");
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 4945bd3..d5d2e4a 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -179,7 +179,6 @@
{
int ret = -ENOMEM;
- tpk_port.port.ops = &null_ops;
mutex_init(&tpk_port.port_write_mutex);
ttyprintk_driver = tty_alloc_driver(1,
@@ -190,6 +189,7 @@
return PTR_ERR(ttyprintk_driver);
tty_port_init(&tpk_port.port);
+ tpk_port.port.ops = &null_ops;
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 8292a00..075db0c 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -872,6 +872,14 @@
struct clk *clk;
int i;
+ /* ac97 */
+ clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 3, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra20-ac97");
+ clks[ac97] = clk;
+
/* apbdma */
clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base,
0, 34, &periph_h_regs,
@@ -1234,9 +1242,6 @@
{uartc, pll_p, 0, 0},
{uartd, pll_p, 0, 0},
{uarte, pll_p, 0, 0},
- {usbd, clk_max, 12000000, 0},
- {usb2, clk_max, 12000000, 0},
- {usb3, clk_max, 12000000, 0},
{pll_a, clk_max, 56448000, 1},
{pll_a_out0, clk_max, 11289600, 1},
{cdev1, clk_max, 0, 1},
diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c
index 5cf4f46..4f45eee 100644
--- a/drivers/clk/x86/clk-lpt.c
+++ b/drivers/clk/x86/clk-lpt.c
@@ -15,22 +15,29 @@
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/platform_data/clk-lpss.h>
#include <linux/platform_device.h>
#define PRV_CLOCK_PARAMS 0x800
static int lpt_clk_probe(struct platform_device *pdev)
{
+ struct lpss_clk_data *drvdata;
struct clk *clk;
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
/* LPSS free running clock */
- clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT,
- 100000000);
+ drvdata->name = "lpss_clk";
+ clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL,
+ CLK_IS_ROOT, 100000000);
if (IS_ERR(clk))
return PTR_ERR(clk);
- /* Shared DMA clock */
- clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto");
+ drvdata->clk = clk;
+ platform_set_drvdata(pdev, drvdata);
return 0;
}
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 8488957..d539127 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <asm/clock.h>
+#include <asm/idle.h>
#include <asm/mach-loongson/loongson.h>
@@ -200,6 +201,7 @@
LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */
LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */
spin_unlock_irqrestore(&loongson2_wait_lock, flags);
+ local_irq_enable();
}
static int __init cpufreq_init(void)
diff --git a/drivers/crypto/nx/nx-aes-cbc.c b/drivers/crypto/nx/nx-aes-cbc.c
index a76d4c4..35d483f 100644
--- a/drivers/crypto/nx/nx-aes-cbc.c
+++ b/drivers/crypto/nx/nx-aes-cbc.c
@@ -126,6 +126,7 @@
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct nx_crypto_ctx),
.cra_type = &crypto_blkcipher_type,
+ .cra_alignmask = 0xf,
.cra_module = THIS_MODULE,
.cra_init = nx_crypto_ctx_aes_cbc_init,
.cra_exit = nx_crypto_ctx_exit,
diff --git a/drivers/crypto/nx/nx-aes-ecb.c b/drivers/crypto/nx/nx-aes-ecb.c
index ba5f161..7bbc9a8 100644
--- a/drivers/crypto/nx/nx-aes-ecb.c
+++ b/drivers/crypto/nx/nx-aes-ecb.c
@@ -123,6 +123,7 @@
.cra_priority = 300,
.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
.cra_blocksize = AES_BLOCK_SIZE,
+ .cra_alignmask = 0xf,
.cra_ctxsize = sizeof(struct nx_crypto_ctx),
.cra_type = &crypto_blkcipher_type,
.cra_module = THIS_MODULE,
diff --git a/drivers/crypto/nx/nx-aes-gcm.c b/drivers/crypto/nx/nx-aes-gcm.c
index c8109ed..6cca6c3 100644
--- a/drivers/crypto/nx/nx-aes-gcm.c
+++ b/drivers/crypto/nx/nx-aes-gcm.c
@@ -219,7 +219,7 @@
if (enc)
NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
else
- nbytes -= AES_BLOCK_SIZE;
+ nbytes -= crypto_aead_authsize(crypto_aead_reqtfm(req));
csbcpb->cpb.aes_gcm.bit_length_data = nbytes * 8;
diff --git a/drivers/crypto/nx/nx-sha256.c b/drivers/crypto/nx/nx-sha256.c
index 9767315..67024f2 100644
--- a/drivers/crypto/nx/nx-sha256.c
+++ b/drivers/crypto/nx/nx-sha256.c
@@ -69,7 +69,7 @@
* 1: <= SHA256_BLOCK_SIZE: copy into state, return 0
* 2: > SHA256_BLOCK_SIZE: process X blocks, copy in leftover
*/
- if (len + sctx->count <= SHA256_BLOCK_SIZE) {
+ if (len + sctx->count < SHA256_BLOCK_SIZE) {
memcpy(sctx->buf + sctx->count, data, len);
sctx->count += len;
goto out;
@@ -110,7 +110,8 @@
atomic_inc(&(nx_ctx->stats->sha256_ops));
/* copy the leftover back into the state struct */
- memcpy(sctx->buf, data + len - leftover, leftover);
+ if (leftover)
+ memcpy(sctx->buf, data + len - leftover, leftover);
sctx->count = leftover;
csbcpb->cpb.sha256.message_bit_length += (u64)
@@ -130,6 +131,7 @@
struct nx_sg *in_sg, *out_sg;
int rc;
+
if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
/* we've hit the nx chip previously, now we're finalizing,
* so copy over the partial digest */
@@ -162,7 +164,7 @@
atomic_inc(&(nx_ctx->stats->sha256_ops));
- atomic64_add(csbcpb->cpb.sha256.message_bit_length,
+ atomic64_add(csbcpb->cpb.sha256.message_bit_length / 8,
&(nx_ctx->stats->sha256_bytes));
memcpy(out, csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE);
out:
diff --git a/drivers/crypto/nx/nx-sha512.c b/drivers/crypto/nx/nx-sha512.c
index 3177b8c..08eee11 100644
--- a/drivers/crypto/nx/nx-sha512.c
+++ b/drivers/crypto/nx/nx-sha512.c
@@ -69,7 +69,7 @@
* 1: <= SHA512_BLOCK_SIZE: copy into state, return 0
* 2: > SHA512_BLOCK_SIZE: process X blocks, copy in leftover
*/
- if ((u64)len + sctx->count[0] <= SHA512_BLOCK_SIZE) {
+ if ((u64)len + sctx->count[0] < SHA512_BLOCK_SIZE) {
memcpy(sctx->buf + sctx->count[0], data, len);
sctx->count[0] += len;
goto out;
@@ -110,7 +110,8 @@
atomic_inc(&(nx_ctx->stats->sha512_ops));
/* copy the leftover back into the state struct */
- memcpy(sctx->buf, data + len - leftover, leftover);
+ if (leftover)
+ memcpy(sctx->buf, data + len - leftover, leftover);
sctx->count[0] = leftover;
spbc_bits = csbcpb->cpb.sha512.spbc * 8;
@@ -168,7 +169,7 @@
goto out;
atomic_inc(&(nx_ctx->stats->sha512_ops));
- atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo,
+ atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo / 8,
&(nx_ctx->stats->sha512_bytes));
memcpy(out, csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE);
diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c
index c767f23..bbdab6e 100644
--- a/drivers/crypto/nx/nx.c
+++ b/drivers/crypto/nx/nx.c
@@ -211,44 +211,20 @@
{
struct nx_sg *nx_insg = nx_ctx->in_sg;
struct nx_sg *nx_outsg = nx_ctx->out_sg;
- struct blkcipher_walk walk;
- int rc;
-
- blkcipher_walk_init(&walk, dst, src, nbytes);
- rc = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
- if (rc)
- goto out;
if (iv)
- memcpy(iv, walk.iv, AES_BLOCK_SIZE);
+ memcpy(iv, desc->info, AES_BLOCK_SIZE);
- while (walk.nbytes) {
- nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr,
- walk.nbytes, nx_ctx->ap->sglen);
- nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr,
- walk.nbytes, nx_ctx->ap->sglen);
-
- rc = blkcipher_walk_done(desc, &walk, 0);
- if (rc)
- break;
- }
-
- if (walk.nbytes) {
- nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr,
- walk.nbytes, nx_ctx->ap->sglen);
- nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr,
- walk.nbytes, nx_ctx->ap->sglen);
-
- rc = 0;
- }
+ nx_insg = nx_walk_and_build(nx_insg, nx_ctx->ap->sglen, src, 0, nbytes);
+ nx_outsg = nx_walk_and_build(nx_outsg, nx_ctx->ap->sglen, dst, 0, nbytes);
/* these lengths should be negative, which will indicate to phyp that
* the input and output parameters are scatterlists, not linear
* buffers */
nx_ctx->op.inlen = (nx_ctx->in_sg - nx_insg) * sizeof(struct nx_sg);
nx_ctx->op.outlen = (nx_ctx->out_sg - nx_outsg) * sizeof(struct nx_sg);
-out:
- return rc;
+
+ return 0;
}
/**
@@ -454,6 +430,8 @@
if (rc)
goto out;
+ nx_driver.of.status = NX_OKAY;
+
rc = crypto_register_alg(&nx_ecb_aes_alg);
if (rc)
goto out;
@@ -498,8 +476,6 @@
if (rc)
goto out_unreg_s512;
- nx_driver.of.status = NX_OKAY;
-
goto out;
out_unreg_s512:
diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
index ba6fc62..5a18f82 100644
--- a/drivers/dma/acpi-dma.c
+++ b/drivers/dma/acpi-dma.c
@@ -4,7 +4,8 @@
* Based on of-dma.c
*
* Copyright (C) 2013, Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,6 +17,7 @@
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/ioport.h>
#include <linux/acpi.h>
#include <linux/acpi_dma.h>
@@ -23,6 +25,117 @@
static DEFINE_MUTEX(acpi_dma_lock);
/**
+ * acpi_dma_parse_resource_group - match device and parse resource group
+ * @grp: CSRT resource group
+ * @adev: ACPI device to match with
+ * @adma: struct acpi_dma of the given DMA controller
+ *
+ * Returns 1 on success, 0 when no information is available, or appropriate
+ * errno value on error.
+ *
+ * In order to match a device from DSDT table to the corresponding CSRT device
+ * we use MMIO address and IRQ.
+ */
+static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
+ struct acpi_device *adev, struct acpi_dma *adma)
+{
+ const struct acpi_csrt_shared_info *si;
+ struct list_head resource_list;
+ struct resource_list_entry *rentry;
+ resource_size_t mem = 0, irq = 0;
+ u32 vendor_id;
+ int ret;
+
+ if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info))
+ return -ENODEV;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+ if (ret <= 0)
+ return 0;
+
+ list_for_each_entry(rentry, &resource_list, node) {
+ if (resource_type(&rentry->res) == IORESOURCE_MEM)
+ mem = rentry->res.start;
+ else if (resource_type(&rentry->res) == IORESOURCE_IRQ)
+ irq = rentry->res.start;
+ }
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ /* Consider initial zero values as resource not found */
+ if (mem == 0 && irq == 0)
+ return 0;
+
+ si = (const struct acpi_csrt_shared_info *)&grp[1];
+
+ /* Match device by MMIO and IRQ */
+ if (si->mmio_base_low != mem || si->gsi_interrupt != irq)
+ return 0;
+
+ vendor_id = le32_to_cpu(grp->vendor_id);
+ dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",
+ (char *)&vendor_id, grp->device_id, grp->revision);
+
+ /* Check if the request line range is available */
+ if (si->base_request_line == 0 && si->num_handshake_signals == 0)
+ return 0;
+
+ adma->base_request_line = si->base_request_line;
+ adma->end_request_line = si->base_request_line +
+ si->num_handshake_signals - 1;
+
+ dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n",
+ adma->base_request_line, adma->end_request_line);
+
+ return 1;
+}
+
+/**
+ * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
+ * @adev: ACPI device to match with
+ * @adma: struct acpi_dma of the given DMA controller
+ *
+ * CSRT or Core System Resources Table is a proprietary ACPI table
+ * introduced by Microsoft. This table can contain devices that are not in
+ * the system DSDT table. In particular DMA controllers might be described
+ * here.
+ *
+ * We are using this table to get the request line range of the specific DMA
+ * controller to be used later.
+ *
+ */
+static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma)
+{
+ struct acpi_csrt_group *grp, *end;
+ struct acpi_table_csrt *csrt;
+ acpi_status status;
+ int ret;
+
+ status = acpi_get_table(ACPI_SIG_CSRT, 0,
+ (struct acpi_table_header **)&csrt);
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND)
+ dev_warn(&adev->dev, "failed to get the CSRT table\n");
+ return;
+ }
+
+ grp = (struct acpi_csrt_group *)(csrt + 1);
+ end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length);
+
+ while (grp < end) {
+ ret = acpi_dma_parse_resource_group(grp, adev, adma);
+ if (ret < 0) {
+ dev_warn(&adev->dev,
+ "error in parsing resource group\n");
+ return;
+ }
+
+ grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
+ }
+}
+
+/**
* acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers
* @dev: struct device of DMA controller
* @acpi_dma_xlate: translation function which converts a dma specifier
@@ -61,6 +174,8 @@
adma->acpi_dma_xlate = acpi_dma_xlate;
adma->data = data;
+ acpi_dma_parse_csrt(adev, adma);
+
/* Now queue acpi_dma controller structure in list */
mutex_lock(&acpi_dma_lock);
list_add_tail(&adma->dma_controllers, &acpi_dma_list);
@@ -149,6 +264,45 @@
}
EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
+/**
+ * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function
+ * @adma: struct acpi_dma of DMA controller
+ * @dma_spec: dma specifier to update
+ *
+ * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
+ *
+ * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource
+ * Descriptor":
+ * DMA Request Line bits is a platform-relative number uniquely
+ * identifying the request line assigned. Request line-to-Controller
+ * mapping is done in a controller-specific OS driver.
+ * That's why we can safely adjust slave_id when the appropriate controller is
+ * found.
+ */
+static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
+ struct acpi_dma_spec *dma_spec)
+{
+ /* Set link to the DMA controller device */
+ dma_spec->dev = adma->dev;
+
+ /* Check if the request line range is available */
+ if (adma->base_request_line == 0 && adma->end_request_line == 0)
+ return 0;
+
+ /* Check if slave_id falls to the range */
+ if (dma_spec->slave_id < adma->base_request_line ||
+ dma_spec->slave_id > adma->end_request_line)
+ return -1;
+
+ /*
+ * Here we adjust slave_id. It should be a relative number to the base
+ * request line.
+ */
+ dma_spec->slave_id -= adma->base_request_line;
+
+ return 1;
+}
+
struct acpi_dma_parser_data {
struct acpi_dma_spec dma_spec;
size_t index;
@@ -193,6 +347,7 @@
struct acpi_device *adev;
struct acpi_dma *adma;
struct dma_chan *chan = NULL;
+ int found;
/* Check if the device was enumerated by ACPI */
if (!dev || !ACPI_HANDLE(dev))
@@ -219,9 +374,20 @@
mutex_lock(&acpi_dma_lock);
list_for_each_entry(adma, &acpi_dma_list, dma_controllers) {
- dma_spec->dev = adma->dev;
+ /*
+ * We are not going to call translation function if slave_id
+ * doesn't fall to the request range.
+ */
+ found = acpi_dma_update_dma_spec(adma, dma_spec);
+ if (found < 0)
+ continue;
chan = adma->acpi_dma_xlate(dma_spec, adma);
- if (chan)
+ /*
+ * Try to get a channel only from the DMA controller that
+ * matches the slave_id. See acpi_dma_update_dma_spec()
+ * description for the details.
+ */
+ if (found > 0 || chan)
break;
}
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 87d5670..573c449 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -636,7 +636,7 @@
config GPIO_MCP23S08
tristate "Microchip MCP23xxx I/O expander"
- depends on SPI_MASTER || I2C
+ depends on (SPI_MASTER && !I2C) || I2C
help
SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
I/O expanders.
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index 634c3d3..62ef10a 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -324,6 +324,7 @@
resource_size_t start, len;
struct lnw_gpio *lnw;
u32 gpio_base;
+ u32 irq_base;
int retval;
int ngpio = id->driver_data;
@@ -345,6 +346,7 @@
retval = -EFAULT;
goto err_ioremap;
}
+ irq_base = *(u32 *)base;
gpio_base = *((u32 *)base + 1);
/* release the IO mapping, since we already get the info from bar1 */
iounmap(base);
@@ -365,13 +367,6 @@
goto err_ioremap;
}
- lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
- &lnw_gpio_irq_ops, lnw);
- if (!lnw->domain) {
- retval = -ENOMEM;
- goto err_ioremap;
- }
-
lnw->reg_base = base;
lnw->chip.label = dev_name(&pdev->dev);
lnw->chip.request = lnw_gpio_request;
@@ -384,6 +379,14 @@
lnw->chip.ngpio = ngpio;
lnw->chip.can_sleep = 0;
lnw->pdev = pdev;
+
+ lnw->domain = irq_domain_add_simple(pdev->dev.of_node, ngpio, irq_base,
+ &lnw_gpio_irq_ops, lnw);
+ if (!lnw->domain) {
+ retval = -ENOMEM;
+ goto err_ioremap;
+ }
+
pci_set_drvdata(pdev, lnw);
retval = gpiochip_add(&lnw->chip);
if (retval) {
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index b733665..0966f26 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -496,8 +496,7 @@
err_gpiochip_add:
while (--i >= 0) {
chip--;
- ret = gpiochip_remove(&chip->gpio);
- if (ret)
+ if (gpiochip_remove(&chip->gpio))
dev_err(&pdev->dev, "Failed gpiochip_remove(%d)\n", i);
}
kfree(chip_save);
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 25000b0..f8e6af2 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -326,7 +326,8 @@
err = bgpio_init(&port->bgc, &pdev->dev, 4,
port->base + PINCTRL_DIN(port),
- port->base + PINCTRL_DOUT(port), NULL,
+ port->base + PINCTRL_DOUT(port) + MXS_SET,
+ port->base + PINCTRL_DOUT(port) + MXS_CLR,
port->base + PINCTRL_DOE(port), NULL, 0);
if (err)
goto out_irqdesc_free;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2050891..d3f7d2d 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -69,6 +69,7 @@
bool is_mpuio;
bool dbck_flag;
bool loses_context;
+ bool context_valid;
int stride;
u32 width;
int context_loss_count;
@@ -1128,6 +1129,10 @@
bank->loses_context = true;
} else {
bank->loses_context = pdata->loses_context;
+
+ if (bank->loses_context)
+ bank->get_context_loss_count =
+ pdata->get_context_loss_count;
}
@@ -1178,9 +1183,6 @@
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
- if (bank->loses_context)
- bank->get_context_loss_count = pdata->get_context_loss_count;
-
pm_runtime_put(bank->dev);
list_add_tail(&bank->node, &omap_gpio_list);
@@ -1259,6 +1261,8 @@
return 0;
}
+static void omap_gpio_init_context(struct gpio_bank *p);
+
static int omap_gpio_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1268,6 +1272,20 @@
int c;
spin_lock_irqsave(&bank->lock, flags);
+
+ /*
+ * On the first resume during the probe, the context has not
+ * been initialised and so initialise it now. Also initialise
+ * the context loss count.
+ */
+ if (bank->loses_context && !bank->context_valid) {
+ omap_gpio_init_context(bank);
+
+ if (bank->get_context_loss_count)
+ bank->context_loss_count =
+ bank->get_context_loss_count(bank->dev);
+ }
+
_gpio_dbck_enable(bank);
/*
@@ -1384,6 +1402,29 @@
}
#if defined(CONFIG_PM_RUNTIME)
+static void omap_gpio_init_context(struct gpio_bank *p)
+{
+ struct omap_gpio_reg_offs *regs = p->regs;
+ void __iomem *base = p->base;
+
+ p->context.ctrl = __raw_readl(base + regs->ctrl);
+ p->context.oe = __raw_readl(base + regs->direction);
+ p->context.wake_en = __raw_readl(base + regs->wkup_en);
+ p->context.leveldetect0 = __raw_readl(base + regs->leveldetect0);
+ p->context.leveldetect1 = __raw_readl(base + regs->leveldetect1);
+ p->context.risingdetect = __raw_readl(base + regs->risingdetect);
+ p->context.fallingdetect = __raw_readl(base + regs->fallingdetect);
+ p->context.irqenable1 = __raw_readl(base + regs->irqenable);
+ p->context.irqenable2 = __raw_readl(base + regs->irqenable2);
+
+ if (regs->set_dataout && p->regs->clr_dataout)
+ p->context.dataout = __raw_readl(base + regs->set_dataout);
+ else
+ p->context.dataout = __raw_readl(base + regs->dataout);
+
+ p->context_valid = true;
+}
+
static void omap_gpio_restore_context(struct gpio_bank *bank)
{
__raw_writel(bank->context.wake_en,
@@ -1421,6 +1462,7 @@
#else
#define omap_gpio_runtime_suspend NULL
#define omap_gpio_runtime_resume NULL
+static void omap_gpio_init_context(struct gpio_bank *p) {}
#endif
static const struct dev_pm_ops gpio_pm_ops = {
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index cdf5996..0fec097 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -424,8 +424,7 @@
err_request_irq:
irq_free_descs(irq_base, gpio_pins[chip->ioh]);
- ret = gpiochip_remove(&chip->gpio);
- if (ret)
+ if (gpiochip_remove(&chip->gpio))
dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
err_gpiochip_add:
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 1e4de16..5af6571 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -272,10 +272,8 @@
return 0;
err_sch_gpio_resume:
- err = gpiochip_remove(&sch_gpio_core);
- if (err)
- dev_err(&pdev->dev, "%s failed, %d\n",
- "gpiochip_remove()", err);
+ if (gpiochip_remove(&sch_gpio_core))
+ dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
err_sch_gpio_core:
release_region(res->start, resource_size(res));
diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c
index 095ab14..5ac2919 100644
--- a/drivers/gpio/gpio-viperboard.c
+++ b/drivers/gpio/gpio-viperboard.c
@@ -446,7 +446,8 @@
return ret;
err_gpiob:
- ret = gpiochip_remove(&vb_gpio->gpioa);
+ if (gpiochip_remove(&vb_gpio->gpioa))
+ dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
err_gpioa:
return ret;
diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
index 955af12..a36e64e 100644
--- a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
@@ -138,7 +138,6 @@
device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass;
- device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass;
device->oclass[NVDEV_ENGINE_DISP ] = &nva3_disp_oclass;
break;
case 0xce:
@@ -225,7 +224,6 @@
device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass;
- device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass;
device->oclass[NVDEV_ENGINE_DISP ] = &nva3_disp_oclass;
break;
case 0xc8:
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c
index ddaeb55..89bf459 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c
@@ -47,6 +47,7 @@
struct nouveau_gpuobj *cur;
int i, p;
+ mutex_lock(&nv_subdev(priv)->mutex);
cur = priv->playlist[priv->cur_playlist];
priv->cur_playlist = !priv->cur_playlist;
@@ -60,6 +61,7 @@
nv_wr32(priv, 0x0032f4, cur->addr >> 12);
nv_wr32(priv, 0x0032ec, p);
nv_wr32(priv, 0x002500, 0x00000101);
+ mutex_unlock(&nv_subdev(priv)->mutex);
}
static int
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
index 4d4a6b9..46dfa68 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nvc0.c
@@ -71,6 +71,7 @@
struct nouveau_gpuobj *cur;
int i, p;
+ mutex_lock(&nv_subdev(priv)->mutex);
cur = priv->playlist[priv->cur_playlist];
priv->cur_playlist = !priv->cur_playlist;
@@ -87,6 +88,7 @@
nv_wr32(priv, 0x002274, 0x01f00000 | (p >> 3));
if (!nv_wait(priv, 0x00227c, 0x00100000, 0x00000000))
nv_error(priv, "playlist update failed\n");
+ mutex_unlock(&nv_subdev(priv)->mutex);
}
static int
@@ -248,9 +250,17 @@
struct nvc0_fifo_priv *priv = (void *)object->engine;
struct nvc0_fifo_chan *chan = (void *)object;
u32 chid = chan->base.chid;
+ u32 mask, engine;
nv_mask(priv, 0x003004 + (chid * 8), 0x00000001, 0x00000000);
nvc0_fifo_playlist_update(priv);
+ mask = nv_rd32(priv, 0x0025a4);
+ for (engine = 0; mask && engine < 16; engine++) {
+ if (!(mask & (1 << engine)))
+ continue;
+ nv_mask(priv, 0x0025a8 + (engine * 4), 0x00000000, 0x00000000);
+ mask &= ~(1 << engine);
+ }
nv_wr32(priv, 0x003000 + (chid * 8), 0x00000000);
return nouveau_fifo_channel_fini(&chan->base, suspend);
diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
index 9151919..56192a7 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
@@ -94,11 +94,13 @@
u32 match = (engine << 16) | 0x00000001;
int i, p;
+ mutex_lock(&nv_subdev(priv)->mutex);
cur = engn->playlist[engn->cur_playlist];
if (unlikely(cur == NULL)) {
int ret = nouveau_gpuobj_new(nv_object(priv), NULL,
0x8000, 0x1000, 0, &cur);
if (ret) {
+ mutex_unlock(&nv_subdev(priv)->mutex);
nv_error(priv, "playlist alloc failed\n");
return;
}
@@ -122,6 +124,7 @@
nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3));
if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000))
nv_error(priv, "playlist %d update timeout\n", engine);
+ mutex_unlock(&nv_subdev(priv)->mutex);
}
static int
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
index c300b5e..c434d39 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
@@ -1940,8 +1940,8 @@
trace("ZM_MASK_ADD\tR[0x%06x] &= 0x%08x += 0x%08x\n", addr, mask, add);
init->offset += 13;
- data = init_rd32(init, addr) & mask;
- data |= ((data + add) & ~mask);
+ data = init_rd32(init, addr);
+ data = (data & mask) | ((data + add) & ~mask);
init_wr32(init, addr, data);
}
diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c
index e4940fb..fb794e9 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/ltcg/nvc0.c
@@ -29,7 +29,6 @@
struct nvc0_ltcg_priv {
struct nouveau_ltcg base;
u32 part_nr;
- u32 part_mask;
u32 subp_nr;
struct nouveau_mm tags;
u32 num_tags;
@@ -105,8 +104,6 @@
/* wait until it's finished with clearing */
for (p = 0; p < priv->part_nr; ++p) {
- if (!(priv->part_mask & (1 << p)))
- continue;
for (i = 0; i < priv->subp_nr; ++i)
nv_wait(priv, 0x1410c8 + p * 0x2000 + i * 0x400, ~0, 0);
}
@@ -121,6 +118,8 @@
int ret;
nv_wr32(priv, 0x17e8d8, priv->part_nr);
+ if (nv_device(pfb)->card_type >= NV_E0)
+ nv_wr32(priv, 0x17e000, priv->part_nr);
/* tags for 1/4 of VRAM should be enough (8192/4 per GiB of VRAM) */
priv->num_tags = (pfb->ram.size >> 17) / 4;
@@ -167,16 +166,20 @@
{
struct nvc0_ltcg_priv *priv;
struct nouveau_fb *pfb = nouveau_fb(parent);
- int ret;
+ u32 parts, mask;
+ int ret, i;
ret = nouveau_ltcg_create(parent, engine, oclass, &priv);
*pobject = nv_object(priv);
if (ret)
return ret;
- priv->part_nr = nv_rd32(priv, 0x022438);
- priv->part_mask = nv_rd32(priv, 0x022554);
-
+ parts = nv_rd32(priv, 0x022438);
+ mask = nv_rd32(priv, 0x022554);
+ for (i = 0; i < parts; i++) {
+ if (!(mask & (1 << i)))
+ priv->part_nr++;
+ }
priv->subp_nr = nv_rd32(priv, 0x17e8dc) >> 28;
nv_mask(priv, 0x17e820, 0x00100000, 0x00000000); /* INTR_EN &= ~0x10 */
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 46c152f..383f4e6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -453,18 +453,32 @@
NV_INFO(drm, "evicting buffers...\n");
ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM);
+ NV_INFO(drm, "waiting for kernel channels to go idle...\n");
+ if (drm->cechan) {
+ ret = nouveau_channel_idle(drm->cechan);
+ if (ret)
+ return ret;
+ }
+
+ if (drm->channel) {
+ ret = nouveau_channel_idle(drm->channel);
+ if (ret)
+ return ret;
+ }
+
+ NV_INFO(drm, "suspending client object trees...\n");
if (drm->fence && nouveau_fence(drm)->suspend) {
if (!nouveau_fence(drm)->suspend(drm))
return -ENOMEM;
}
- NV_INFO(drm, "suspending client object trees...\n");
list_for_each_entry(cli, &drm->clients, head) {
ret = nouveau_client_fini(&cli->base, true);
if (ret)
goto fail_client;
}
+ NV_INFO(drm, "suspending kernel object tree...\n");
ret = nouveau_client_fini(&drm->client.base, true);
if (ret)
goto fail_client;
@@ -514,17 +528,18 @@
nouveau_agp_reset(drm);
- NV_INFO(drm, "resuming client object trees...\n");
+ NV_INFO(drm, "resuming kernel object tree...\n");
nouveau_client_init(&drm->client.base);
nouveau_agp_init(drm);
+ NV_INFO(drm, "resuming client object trees...\n");
+ if (drm->fence && nouveau_fence(drm)->resume)
+ nouveau_fence(drm)->resume(drm);
+
list_for_each_entry(cli, &drm->clients, head) {
nouveau_client_init(&cli->base);
}
- if (drm->fence && nouveau_fence(drm)->resume)
- nouveau_fence(drm)->resume(drm);
-
nouveau_run_vbios_init(dev);
nouveau_pm_resume(dev);
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 6d6fdb3..d5df8fd 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1811,12 +1811,9 @@
static void atombios_crtc_prepare(struct drm_crtc *crtc)
{
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
- radeon_crtc->in_mode_set = true;
-
/* disable crtc pair power gating before programming */
if (ASIC_IS_DCE6(rdev))
atombios_powergate_crtc(crtc, ATOM_DISABLE);
@@ -1827,11 +1824,8 @@
static void atombios_crtc_commit(struct drm_crtc *crtc)
{
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-
atombios_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
atombios_lock_crtc(crtc, ATOM_DISABLE);
- radeon_crtc->in_mode_set = false;
}
static void atombios_crtc_disable(struct drm_crtc *crtc)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 105bafb..8f9e2d3 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2343,11 +2343,13 @@
u32 crtc_enabled, tmp, frame_count, blackout;
int i, j;
- save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
- save->vga_hdp_control = RREG32(VGA_HDP_CONTROL);
+ if (!ASIC_IS_NODCE(rdev)) {
+ save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
+ save->vga_hdp_control = RREG32(VGA_HDP_CONTROL);
- /* disable VGA render */
- WREG32(VGA_RENDER_CONTROL, 0);
+ /* disable VGA render */
+ WREG32(VGA_RENDER_CONTROL, 0);
+ }
/* blank the display controllers */
for (i = 0; i < rdev->num_crtc; i++) {
crtc_enabled = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]) & EVERGREEN_CRTC_MASTER_EN;
@@ -2438,8 +2440,11 @@
WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + crtc_offsets[i],
(u32)rdev->mc.vram_start);
}
- WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start));
- WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start);
+
+ if (!ASIC_IS_NODCE(rdev)) {
+ WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS_HIGH, upper_32_bits(rdev->mc.vram_start));
+ WREG32(EVERGREEN_VGA_MEMORY_BASE_ADDRESS, (u32)rdev->mc.vram_start);
+ }
/* unlock regs and wait for update */
for (i = 0; i < rdev->num_crtc; i++) {
@@ -2499,10 +2504,12 @@
}
}
}
- /* Unlock vga access */
- WREG32(VGA_HDP_CONTROL, save->vga_hdp_control);
- mdelay(1);
- WREG32(VGA_RENDER_CONTROL, save->vga_render_control);
+ if (!ASIC_IS_NODCE(rdev)) {
+ /* Unlock vga access */
+ WREG32(VGA_HDP_CONTROL, save->vga_hdp_control);
+ mdelay(1);
+ WREG32(VGA_RENDER_CONTROL, save->vga_render_control);
+ }
}
void evergreen_mc_program(struct radeon_device *rdev)
@@ -3405,8 +3412,8 @@
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
} else {
/* size in MB on evergreen/cayman/tn */
- rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
- rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
+ rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+ rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
}
rdev->mc.visible_vram_size = rdev->mc.aper_size;
r700_vram_gtt_location(rdev, &rdev->mc);
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index b4ab8ce..ed7c8a7 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -154,19 +154,18 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- u32 base_rate = 48000;
+ u32 base_rate = 24000;
if (!dig || !dig->afmt)
return;
- /* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
- WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
}
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 47f180a..456750a 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -232,7 +232,7 @@
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 base_rate = 48000;
+ u32 base_rate = 24000;
if (!dig || !dig->afmt)
return;
@@ -240,7 +240,6 @@
/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
* doesn't matter which one you use. Just use the first one.
*/
- /* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
@@ -250,13 +249,13 @@
/* according to the reg specs, this should DCE3.2 only, but in
* practice it seems to cover DCE3.0 as well.
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
} else {
/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
- WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) |
- AUDIO_DTO_MODULE(clock * 100));
+ WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
+ AUDIO_DTO_MODULE(clock / 10));
}
}
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 1442ce7..142ce6c 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1694,6 +1694,7 @@
int num_crtc; /* number of crtcs */
struct mutex dc_hw_i2c_mutex; /* display controller hw i2c mutex */
bool audio_enabled;
+ bool has_uvd;
struct r600_audio audio_status; /* audio stuff */
struct notifier_block acpi_nb;
/* only one userspace can use Hyperz features or CMASK at a time */
@@ -1838,6 +1839,7 @@
#define ASIC_IS_DCE61(rdev) ((rdev->family >= CHIP_ARUBA) && \
(rdev->flags & RADEON_IS_IGP))
#define ASIC_IS_DCE64(rdev) ((rdev->family == CHIP_OLAND))
+#define ASIC_IS_NODCE(rdev) ((rdev->family == CHIP_HAINAN))
/*
* BIOS helpers.
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index 6417132..06b8c19 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1935,6 +1935,8 @@
else
rdev->num_crtc = 2;
+ rdev->has_uvd = false;
+
switch (rdev->family) {
case CHIP_R100:
case CHIP_RV100:
@@ -1999,16 +2001,22 @@
case CHIP_RV635:
case CHIP_RV670:
rdev->asic = &r600_asic;
+ if (rdev->family == CHIP_R600)
+ rdev->has_uvd = false;
+ else
+ rdev->has_uvd = true;
break;
case CHIP_RS780:
case CHIP_RS880:
rdev->asic = &rs780_asic;
+ rdev->has_uvd = true;
break;
case CHIP_RV770:
case CHIP_RV730:
case CHIP_RV710:
case CHIP_RV740:
rdev->asic = &rv770_asic;
+ rdev->has_uvd = true;
break;
case CHIP_CEDAR:
case CHIP_REDWOOD:
@@ -2021,11 +2029,13 @@
else
rdev->num_crtc = 6;
rdev->asic = &evergreen_asic;
+ rdev->has_uvd = true;
break;
case CHIP_PALM:
case CHIP_SUMO:
case CHIP_SUMO2:
rdev->asic = &sumo_asic;
+ rdev->has_uvd = true;
break;
case CHIP_BARTS:
case CHIP_TURKS:
@@ -2036,27 +2046,37 @@
else
rdev->num_crtc = 6;
rdev->asic = &btc_asic;
+ rdev->has_uvd = true;
break;
case CHIP_CAYMAN:
rdev->asic = &cayman_asic;
/* set num crtcs */
rdev->num_crtc = 6;
+ rdev->has_uvd = true;
break;
case CHIP_ARUBA:
rdev->asic = &trinity_asic;
/* set num crtcs */
rdev->num_crtc = 4;
+ rdev->has_uvd = true;
break;
case CHIP_TAHITI:
case CHIP_PITCAIRN:
case CHIP_VERDE:
case CHIP_OLAND:
+ case CHIP_HAINAN:
rdev->asic = &si_asic;
/* set num crtcs */
- if (rdev->family == CHIP_OLAND)
+ if (rdev->family == CHIP_HAINAN)
+ rdev->num_crtc = 0;
+ else if (rdev->family == CHIP_OLAND)
rdev->num_crtc = 2;
else
rdev->num_crtc = 6;
+ if (rdev->family == CHIP_HAINAN)
+ rdev->has_uvd = false;
+ else
+ rdev->has_uvd = true;
break;
default:
/* FIXME: not supported yet */
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index fa3c56f..061b227 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -244,24 +244,28 @@
/* enable the rom */
WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
- /* Disable VGA mode */
- WREG32(AVIVO_D1VGA_CONTROL,
- (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
- AVIVO_DVGA_CONTROL_TIMING_SELECT)));
- WREG32(AVIVO_D2VGA_CONTROL,
- (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
- AVIVO_DVGA_CONTROL_TIMING_SELECT)));
- WREG32(AVIVO_VGA_RENDER_CONTROL,
- (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+ if (!ASIC_IS_NODCE(rdev)) {
+ /* Disable VGA mode */
+ WREG32(AVIVO_D1VGA_CONTROL,
+ (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+ AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+ WREG32(AVIVO_D2VGA_CONTROL,
+ (d2vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
+ AVIVO_DVGA_CONTROL_TIMING_SELECT)));
+ WREG32(AVIVO_VGA_RENDER_CONTROL,
+ (vga_render_control & ~AVIVO_VGA_VSTATUS_CNTL_MASK));
+ }
WREG32(R600_ROM_CNTL, rom_cntl | R600_SCK_OVERWRITE);
r = radeon_read_bios(rdev);
/* restore regs */
WREG32(R600_BUS_CNTL, bus_cntl);
- WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
- WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
- WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+ if (!ASIC_IS_NODCE(rdev)) {
+ WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
+ WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
+ WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
+ }
WREG32(R600_ROM_CNTL, rom_cntl);
return r;
}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index a8f6089..c2c59fb 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -94,6 +94,7 @@
"PITCAIRN",
"VERDE",
"OLAND",
+ "HAINAN",
"LAST",
};
diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h
index 2d91123..36e9803 100644
--- a/drivers/gpu/drm/radeon/radeon_family.h
+++ b/drivers/gpu/drm/radeon/radeon_family.h
@@ -92,6 +92,7 @@
CHIP_PITCAIRN,
CHIP_VERDE,
CHIP_OLAND,
+ CHIP_HAINAN,
CHIP_LAST,
};
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 6857cb4..7cb178a 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -1031,11 +1031,9 @@
static void radeon_crtc_prepare(struct drm_crtc *crtc)
{
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_crtc *crtci;
- radeon_crtc->in_mode_set = true;
/*
* The hardware wedges sometimes if you reconfigure one CRTC
* whilst another is running (see fdo bug #24611).
@@ -1046,7 +1044,6 @@
static void radeon_crtc_commit(struct drm_crtc *crtc)
{
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_crtc *crtci;
@@ -1057,7 +1054,6 @@
if (crtci->enabled)
radeon_crtc_dpms(crtci, DRM_MODE_DPMS_ON);
}
- radeon_crtc->in_mode_set = false;
}
static const struct drm_crtc_helper_funcs legacy_helper_funcs = {
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 44e579e..69ad4fe 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -302,7 +302,6 @@
u16 lut_r[256], lut_g[256], lut_b[256];
bool enabled;
bool can_tile;
- bool in_mode_set;
uint32_t crtc_offset;
struct drm_gem_object *cursor_bo;
uint64_t cursor_addr;
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 93f760e..6c0ce89 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -726,7 +726,7 @@
return r;
}
DRM_INFO("radeon: %uM of VRAM memory ready\n",
- (unsigned)rdev->mc.real_vram_size / (1024 * 1024));
+ (unsigned) (rdev->mc.real_vram_size / (1024 * 1024)));
r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT,
rdev->mc.gtt_size >> PAGE_SHIFT);
if (r) {
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index f0b6c2f..5ffade6 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -60,6 +60,11 @@
MODULE_FIRMWARE("radeon/OLAND_ce.bin");
MODULE_FIRMWARE("radeon/OLAND_mc.bin");
MODULE_FIRMWARE("radeon/OLAND_rlc.bin");
+MODULE_FIRMWARE("radeon/HAINAN_pfp.bin");
+MODULE_FIRMWARE("radeon/HAINAN_me.bin");
+MODULE_FIRMWARE("radeon/HAINAN_ce.bin");
+MODULE_FIRMWARE("radeon/HAINAN_mc.bin");
+MODULE_FIRMWARE("radeon/HAINAN_rlc.bin");
extern int r600_ih_ring_alloc(struct radeon_device *rdev);
extern void r600_ih_ring_fini(struct radeon_device *rdev);
@@ -265,6 +270,40 @@
0x15c0, 0x000c0fc0, 0x000c0400
};
+static const u32 hainan_golden_registers[] =
+{
+ 0x9a10, 0x00010000, 0x00018208,
+ 0x9830, 0xffffffff, 0x00000000,
+ 0x9834, 0xf00fffff, 0x00000400,
+ 0x9838, 0x0002021c, 0x00020200,
+ 0xd0c0, 0xff000fff, 0x00000100,
+ 0xd030, 0x000300c0, 0x00800040,
+ 0xd8c0, 0xff000fff, 0x00000100,
+ 0xd830, 0x000300c0, 0x00800040,
+ 0x2ae4, 0x00073ffe, 0x000022a2,
+ 0x240c, 0x000007ff, 0x00000000,
+ 0x8a14, 0xf000001f, 0x00000007,
+ 0x8b24, 0xffffffff, 0x00ffffff,
+ 0x8b10, 0x0000ff0f, 0x00000000,
+ 0x28a4c, 0x07ffffff, 0x4e000000,
+ 0x28350, 0x3f3f3fff, 0x00000000,
+ 0x30, 0x000000ff, 0x0040,
+ 0x34, 0x00000040, 0x00004040,
+ 0x9100, 0x03e00000, 0x03600000,
+ 0x9060, 0x0000007f, 0x00000020,
+ 0x9508, 0x00010000, 0x00010000,
+ 0xac14, 0x000003ff, 0x000000f1,
+ 0xac10, 0xffffffff, 0x00000000,
+ 0xac0c, 0xffffffff, 0x00003210,
+ 0x88d4, 0x0000001f, 0x00000010,
+ 0x15c0, 0x000c0fc0, 0x000c0400
+};
+
+static const u32 hainan_golden_registers2[] =
+{
+ 0x98f8, 0xffffffff, 0x02010001
+};
+
static const u32 tahiti_mgcg_cgcg_init[] =
{
0xc400, 0xffffffff, 0xfffffffc,
@@ -673,6 +712,83 @@
0xd8c0, 0xfffffff0, 0x00000100
};
+static const u32 hainan_mgcg_cgcg_init[] =
+{
+ 0xc400, 0xffffffff, 0xfffffffc,
+ 0x802c, 0xffffffff, 0xe0000000,
+ 0x9a60, 0xffffffff, 0x00000100,
+ 0x92a4, 0xffffffff, 0x00000100,
+ 0xc164, 0xffffffff, 0x00000100,
+ 0x9774, 0xffffffff, 0x00000100,
+ 0x8984, 0xffffffff, 0x06000100,
+ 0x8a18, 0xffffffff, 0x00000100,
+ 0x92a0, 0xffffffff, 0x00000100,
+ 0xc380, 0xffffffff, 0x00000100,
+ 0x8b28, 0xffffffff, 0x00000100,
+ 0x9144, 0xffffffff, 0x00000100,
+ 0x8d88, 0xffffffff, 0x00000100,
+ 0x8d8c, 0xffffffff, 0x00000100,
+ 0x9030, 0xffffffff, 0x00000100,
+ 0x9034, 0xffffffff, 0x00000100,
+ 0x9038, 0xffffffff, 0x00000100,
+ 0x903c, 0xffffffff, 0x00000100,
+ 0xad80, 0xffffffff, 0x00000100,
+ 0xac54, 0xffffffff, 0x00000100,
+ 0x897c, 0xffffffff, 0x06000100,
+ 0x9868, 0xffffffff, 0x00000100,
+ 0x9510, 0xffffffff, 0x00000100,
+ 0xaf04, 0xffffffff, 0x00000100,
+ 0xae04, 0xffffffff, 0x00000100,
+ 0x949c, 0xffffffff, 0x00000100,
+ 0x802c, 0xffffffff, 0xe0000000,
+ 0x9160, 0xffffffff, 0x00010000,
+ 0x9164, 0xffffffff, 0x00030002,
+ 0x9168, 0xffffffff, 0x00040007,
+ 0x916c, 0xffffffff, 0x00060005,
+ 0x9170, 0xffffffff, 0x00090008,
+ 0x9174, 0xffffffff, 0x00020001,
+ 0x9178, 0xffffffff, 0x00040003,
+ 0x917c, 0xffffffff, 0x00000007,
+ 0x9180, 0xffffffff, 0x00060005,
+ 0x9184, 0xffffffff, 0x00090008,
+ 0x9188, 0xffffffff, 0x00030002,
+ 0x918c, 0xffffffff, 0x00050004,
+ 0x9190, 0xffffffff, 0x00000008,
+ 0x9194, 0xffffffff, 0x00070006,
+ 0x9198, 0xffffffff, 0x000a0009,
+ 0x919c, 0xffffffff, 0x00040003,
+ 0x91a0, 0xffffffff, 0x00060005,
+ 0x91a4, 0xffffffff, 0x00000009,
+ 0x91a8, 0xffffffff, 0x00080007,
+ 0x91ac, 0xffffffff, 0x000b000a,
+ 0x91b0, 0xffffffff, 0x00050004,
+ 0x91b4, 0xffffffff, 0x00070006,
+ 0x91b8, 0xffffffff, 0x0008000b,
+ 0x91bc, 0xffffffff, 0x000a0009,
+ 0x91c0, 0xffffffff, 0x000d000c,
+ 0x91c4, 0xffffffff, 0x00060005,
+ 0x91c8, 0xffffffff, 0x00080007,
+ 0x91cc, 0xffffffff, 0x0000000b,
+ 0x91d0, 0xffffffff, 0x000a0009,
+ 0x91d4, 0xffffffff, 0x000d000c,
+ 0x9150, 0xffffffff, 0x96940200,
+ 0x8708, 0xffffffff, 0x00900100,
+ 0xc478, 0xffffffff, 0x00000080,
+ 0xc404, 0xffffffff, 0x0020003f,
+ 0x30, 0xffffffff, 0x0000001c,
+ 0x34, 0x000f0000, 0x000f0000,
+ 0x160c, 0xffffffff, 0x00000100,
+ 0x1024, 0xffffffff, 0x00000100,
+ 0x20a8, 0xffffffff, 0x00000104,
+ 0x264c, 0x000c0000, 0x000c0000,
+ 0x2648, 0x000c0000, 0x000c0000,
+ 0x2f50, 0x00000001, 0x00000001,
+ 0x30cc, 0xc0000fff, 0x00000104,
+ 0xc1e4, 0x00000001, 0x00000001,
+ 0xd0c0, 0xfffffff0, 0x00000100,
+ 0xd8c0, 0xfffffff0, 0x00000100
+};
+
static u32 verde_pg_init[] =
{
0x353c, 0xffffffff, 0x40000,
@@ -853,6 +969,17 @@
oland_mgcg_cgcg_init,
(const u32)ARRAY_SIZE(oland_mgcg_cgcg_init));
break;
+ case CHIP_HAINAN:
+ radeon_program_register_sequence(rdev,
+ hainan_golden_registers,
+ (const u32)ARRAY_SIZE(hainan_golden_registers));
+ radeon_program_register_sequence(rdev,
+ hainan_golden_registers2,
+ (const u32)ARRAY_SIZE(hainan_golden_registers2));
+ radeon_program_register_sequence(rdev,
+ hainan_mgcg_cgcg_init,
+ (const u32)ARRAY_SIZE(hainan_mgcg_cgcg_init));
+ break;
default:
break;
}
@@ -1062,6 +1189,45 @@
{0x0000009f, 0x00a17730}
};
+static const u32 hainan_io_mc_regs[TAHITI_IO_MC_REGS_SIZE][2] = {
+ {0x0000006f, 0x03044000},
+ {0x00000070, 0x0480c018},
+ {0x00000071, 0x00000040},
+ {0x00000072, 0x01000000},
+ {0x00000074, 0x000000ff},
+ {0x00000075, 0x00143400},
+ {0x00000076, 0x08ec0800},
+ {0x00000077, 0x040000cc},
+ {0x00000079, 0x00000000},
+ {0x0000007a, 0x21000409},
+ {0x0000007c, 0x00000000},
+ {0x0000007d, 0xe8000000},
+ {0x0000007e, 0x044408a8},
+ {0x0000007f, 0x00000003},
+ {0x00000080, 0x00000000},
+ {0x00000081, 0x01000000},
+ {0x00000082, 0x02000000},
+ {0x00000083, 0x00000000},
+ {0x00000084, 0xe3f3e4f4},
+ {0x00000085, 0x00052024},
+ {0x00000087, 0x00000000},
+ {0x00000088, 0x66036603},
+ {0x00000089, 0x01000000},
+ {0x0000008b, 0x1c0a0000},
+ {0x0000008c, 0xff010000},
+ {0x0000008e, 0xffffefff},
+ {0x0000008f, 0xfff3efff},
+ {0x00000090, 0xfff3efbf},
+ {0x00000094, 0x00101101},
+ {0x00000095, 0x00000fff},
+ {0x00000096, 0x00116fff},
+ {0x00000097, 0x60010000},
+ {0x00000098, 0x10010000},
+ {0x00000099, 0x00006000},
+ {0x0000009a, 0x00001000},
+ {0x0000009f, 0x00a07730}
+};
+
/* ucode loading */
static int si_mc_load_microcode(struct radeon_device *rdev)
{
@@ -1095,6 +1261,11 @@
ucode_size = OLAND_MC_UCODE_SIZE;
regs_size = TAHITI_IO_MC_REGS_SIZE;
break;
+ case CHIP_HAINAN:
+ io_mc_regs = (u32 *)&hainan_io_mc_regs;
+ ucode_size = OLAND_MC_UCODE_SIZE;
+ regs_size = TAHITI_IO_MC_REGS_SIZE;
+ break;
}
running = RREG32(MC_SEQ_SUP_CNTL) & RUN_MASK;
@@ -1198,6 +1369,15 @@
rlc_req_size = SI_RLC_UCODE_SIZE * 4;
mc_req_size = OLAND_MC_UCODE_SIZE * 4;
break;
+ case CHIP_HAINAN:
+ chip_name = "HAINAN";
+ rlc_chip_name = "HAINAN";
+ pfp_req_size = SI_PFP_UCODE_SIZE * 4;
+ me_req_size = SI_PM4_UCODE_SIZE * 4;
+ ce_req_size = SI_CE_UCODE_SIZE * 4;
+ rlc_req_size = SI_RLC_UCODE_SIZE * 4;
+ mc_req_size = OLAND_MC_UCODE_SIZE * 4;
+ break;
default: BUG();
}
@@ -2003,7 +2183,8 @@
WREG32(GB_TILE_MODE0 + (reg_offset * 4), gb_tile_moden);
}
} else if ((rdev->family == CHIP_VERDE) ||
- (rdev->family == CHIP_OLAND)) {
+ (rdev->family == CHIP_OLAND) ||
+ (rdev->family == CHIP_HAINAN)) {
for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) {
switch (reg_offset) {
case 0: /* non-AA compressed depth or any compressed stencil */
@@ -2466,6 +2647,23 @@
rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
gb_addr_config = VERDE_GB_ADDR_CONFIG_GOLDEN;
break;
+ case CHIP_HAINAN:
+ rdev->config.si.max_shader_engines = 1;
+ rdev->config.si.max_tile_pipes = 4;
+ rdev->config.si.max_cu_per_sh = 5;
+ rdev->config.si.max_sh_per_se = 1;
+ rdev->config.si.max_backends_per_se = 1;
+ rdev->config.si.max_texture_channel_caches = 2;
+ rdev->config.si.max_gprs = 256;
+ rdev->config.si.max_gs_threads = 16;
+ rdev->config.si.max_hw_contexts = 8;
+
+ rdev->config.si.sc_prim_fifo_size_frontend = 0x20;
+ rdev->config.si.sc_prim_fifo_size_backend = 0x40;
+ rdev->config.si.sc_hiz_tile_fifo_size = 0x30;
+ rdev->config.si.sc_earlyz_tile_fifo_size = 0x130;
+ gb_addr_config = HAINAN_GB_ADDR_CONFIG_GOLDEN;
+ break;
}
/* Initialize HDP */
@@ -2559,9 +2757,11 @@
WREG32(HDP_ADDR_CONFIG, gb_addr_config);
WREG32(DMA_TILING_CONFIG + DMA0_REGISTER_OFFSET, gb_addr_config);
WREG32(DMA_TILING_CONFIG + DMA1_REGISTER_OFFSET, gb_addr_config);
- WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config);
- WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config);
- WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config);
+ if (rdev->has_uvd) {
+ WREG32(UVD_UDEC_ADDR_CONFIG, gb_addr_config);
+ WREG32(UVD_UDEC_DB_ADDR_CONFIG, gb_addr_config);
+ WREG32(UVD_UDEC_DBW_ADDR_CONFIG, gb_addr_config);
+ }
si_tiling_mode_table_init(rdev);
@@ -3304,8 +3504,9 @@
if (radeon_mc_wait_for_idle(rdev)) {
dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
- /* Lockout access through VGA aperture*/
- WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
+ if (!ASIC_IS_NODCE(rdev))
+ /* Lockout access through VGA aperture*/
+ WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
/* Update configuration */
WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
rdev->mc.vram_start >> 12);
@@ -3327,9 +3528,11 @@
dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
evergreen_mc_resume(rdev, &save);
- /* we need to own VRAM, so turn off the VGA renderer here
- * to stop it overwriting our objects */
- rv515_vga_render_disable(rdev);
+ if (!ASIC_IS_NODCE(rdev)) {
+ /* we need to own VRAM, so turn off the VGA renderer here
+ * to stop it overwriting our objects */
+ rv515_vga_render_disable(rdev);
+ }
}
static void si_vram_gtt_location(struct radeon_device *rdev,
@@ -3397,8 +3600,8 @@
rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
/* size in MB on si */
- rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
- rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
+ rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+ rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024ULL * 1024ULL;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
si_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
@@ -4251,8 +4454,10 @@
tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp);
WREG32(GRBM_INT_CNTL, 0);
- WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
- WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+ if (rdev->num_crtc >= 2) {
+ WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
+ WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+ }
if (rdev->num_crtc >= 4) {
WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
@@ -4262,8 +4467,10 @@
WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+ if (rdev->num_crtc >= 2) {
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
+ }
if (rdev->num_crtc >= 4) {
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
@@ -4273,21 +4480,22 @@
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
- WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
+ if (!ASIC_IS_NODCE(rdev)) {
+ WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
- tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD1_INT_CONTROL, tmp);
- tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD2_INT_CONTROL, tmp);
- tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD3_INT_CONTROL, tmp);
- tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD4_INT_CONTROL, tmp);
- tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD5_INT_CONTROL, tmp);
- tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD6_INT_CONTROL, tmp);
-
+ tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+ WREG32(DC_HPD1_INT_CONTROL, tmp);
+ tmp = RREG32(DC_HPD2_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+ WREG32(DC_HPD2_INT_CONTROL, tmp);
+ tmp = RREG32(DC_HPD3_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+ WREG32(DC_HPD3_INT_CONTROL, tmp);
+ tmp = RREG32(DC_HPD4_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+ WREG32(DC_HPD4_INT_CONTROL, tmp);
+ tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+ WREG32(DC_HPD5_INT_CONTROL, tmp);
+ tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY;
+ WREG32(DC_HPD6_INT_CONTROL, tmp);
+ }
}
static int si_irq_init(struct radeon_device *rdev)
@@ -4366,7 +4574,7 @@
u32 cp_int_cntl = CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE;
u32 cp_int_cntl1 = 0, cp_int_cntl2 = 0;
u32 crtc1 = 0, crtc2 = 0, crtc3 = 0, crtc4 = 0, crtc5 = 0, crtc6 = 0;
- u32 hpd1, hpd2, hpd3, hpd4, hpd5, hpd6;
+ u32 hpd1 = 0, hpd2 = 0, hpd3 = 0, hpd4 = 0, hpd5 = 0, hpd6 = 0;
u32 grbm_int_cntl = 0;
u32 grph1 = 0, grph2 = 0, grph3 = 0, grph4 = 0, grph5 = 0, grph6 = 0;
u32 dma_cntl, dma_cntl1;
@@ -4383,12 +4591,14 @@
return 0;
}
- hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
- hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN;
- hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN;
- hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN;
- hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN;
- hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ if (!ASIC_IS_NODCE(rdev)) {
+ hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ hpd2 = RREG32(DC_HPD2_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ hpd3 = RREG32(DC_HPD3_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ hpd4 = RREG32(DC_HPD4_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ hpd5 = RREG32(DC_HPD5_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ hpd6 = RREG32(DC_HPD6_INT_CONTROL) & ~DC_HPDx_INT_EN;
+ }
dma_cntl = RREG32(DMA_CNTL + DMA0_REGISTER_OFFSET) & ~TRAP_ENABLE;
dma_cntl1 = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE;
@@ -4479,8 +4689,10 @@
WREG32(GRBM_INT_CNTL, grbm_int_cntl);
- WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1);
- WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2);
+ if (rdev->num_crtc >= 2) {
+ WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1);
+ WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2);
+ }
if (rdev->num_crtc >= 4) {
WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3);
WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4);
@@ -4490,8 +4702,10 @@
WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6);
}
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+ if (rdev->num_crtc >= 2) {
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
+ }
if (rdev->num_crtc >= 4) {
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
@@ -4501,12 +4715,14 @@
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
}
- WREG32(DC_HPD1_INT_CONTROL, hpd1);
- WREG32(DC_HPD2_INT_CONTROL, hpd2);
- WREG32(DC_HPD3_INT_CONTROL, hpd3);
- WREG32(DC_HPD4_INT_CONTROL, hpd4);
- WREG32(DC_HPD5_INT_CONTROL, hpd5);
- WREG32(DC_HPD6_INT_CONTROL, hpd6);
+ if (!ASIC_IS_NODCE(rdev)) {
+ WREG32(DC_HPD1_INT_CONTROL, hpd1);
+ WREG32(DC_HPD2_INT_CONTROL, hpd2);
+ WREG32(DC_HPD3_INT_CONTROL, hpd3);
+ WREG32(DC_HPD4_INT_CONTROL, hpd4);
+ WREG32(DC_HPD5_INT_CONTROL, hpd5);
+ WREG32(DC_HPD6_INT_CONTROL, hpd6);
+ }
return 0;
}
@@ -4515,6 +4731,9 @@
{
u32 tmp;
+ if (ASIC_IS_NODCE(rdev))
+ return;
+
rdev->irq.stat_regs.evergreen.disp_int = RREG32(DISP_INTERRUPT_STATUS);
rdev->irq.stat_regs.evergreen.disp_int_cont = RREG32(DISP_INTERRUPT_STATUS_CONTINUE);
rdev->irq.stat_regs.evergreen.disp_int_cont2 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE2);
@@ -5118,15 +5337,17 @@
return r;
}
- r = rv770_uvd_resume(rdev);
- if (!r) {
- r = radeon_fence_driver_start_ring(rdev,
- R600_RING_TYPE_UVD_INDEX);
+ if (rdev->has_uvd) {
+ r = rv770_uvd_resume(rdev);
+ if (!r) {
+ r = radeon_fence_driver_start_ring(rdev,
+ R600_RING_TYPE_UVD_INDEX);
+ if (r)
+ dev_err(rdev->dev, "UVD fences init error (%d).\n", r);
+ }
if (r)
- dev_err(rdev->dev, "UVD fences init error (%d).\n", r);
+ rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0;
}
- if (r)
- rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0;
/* Enable IRQ */
r = si_irq_init(rdev);
@@ -5185,16 +5406,18 @@
if (r)
return r;
- ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
- if (ring->ring_size) {
- r = radeon_ring_init(rdev, ring, ring->ring_size,
- R600_WB_UVD_RPTR_OFFSET,
- UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR,
- 0, 0xfffff, RADEON_CP_PACKET2);
- if (!r)
- r = r600_uvd_init(rdev);
- if (r)
- DRM_ERROR("radeon: failed initializing UVD (%d).\n", r);
+ if (rdev->has_uvd) {
+ ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
+ if (ring->ring_size) {
+ r = radeon_ring_init(rdev, ring, ring->ring_size,
+ R600_WB_UVD_RPTR_OFFSET,
+ UVD_RBC_RB_RPTR, UVD_RBC_RB_WPTR,
+ 0, 0xfffff, RADEON_CP_PACKET2);
+ if (!r)
+ r = r600_uvd_init(rdev);
+ if (r)
+ DRM_ERROR("radeon: failed initializing UVD (%d).\n", r);
+ }
}
r = radeon_ib_pool_init(rdev);
@@ -5243,8 +5466,10 @@
radeon_vm_manager_fini(rdev);
si_cp_enable(rdev, false);
cayman_dma_stop(rdev);
- r600_uvd_rbc_stop(rdev);
- radeon_uvd_suspend(rdev);
+ if (rdev->has_uvd) {
+ r600_uvd_rbc_stop(rdev);
+ radeon_uvd_suspend(rdev);
+ }
si_irq_suspend(rdev);
radeon_wb_disable(rdev);
si_pcie_gart_disable(rdev);
@@ -5332,11 +5557,13 @@
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 64 * 1024);
- r = radeon_uvd_init(rdev);
- if (!r) {
- ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
- ring->ring_obj = NULL;
- r600_ring_init(rdev, ring, 4096);
+ if (rdev->has_uvd) {
+ r = radeon_uvd_init(rdev);
+ if (!r) {
+ ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
+ ring->ring_obj = NULL;
+ r600_ring_init(rdev, ring, 4096);
+ }
}
rdev->ih.ring_obj = NULL;
@@ -5384,7 +5611,8 @@
radeon_vm_manager_fini(rdev);
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
- radeon_uvd_fini(rdev);
+ if (rdev->has_uvd)
+ radeon_uvd_fini(rdev);
si_pcie_gart_fini(rdev);
r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index 222877b..8f2d7d4 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -28,6 +28,7 @@
#define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003
#define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002
+#define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001
/* discrete uvd clocks */
#define CG_UPLL_FUNC_CNTL 0x634
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index bad8128..21ef689 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -329,7 +329,7 @@
return 0;
}
cur_cpu = (++next_vp % max_cpus);
- return cur_cpu;
+ return hv_context.vp_index[cur_cpu];
}
/*
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 21fbb34..c41ca63 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -383,7 +383,8 @@
/* Enable the adapter */
__i2c_dw_enable(dev, true);
- /* Enable interrupts */
+ /* Clear and enable interrupts */
+ i2c_dw_clear_int(dev);
dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
}
@@ -448,8 +449,14 @@
cmd |= BIT(9);
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+
+ /* avoid rx buffer overrun */
+ if (rx_limit - dev->rx_outstanding <= 0)
+ break;
+
dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
rx_limit--;
+ dev->rx_outstanding++;
} else
dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD);
tx_limit--; buf_len--;
@@ -502,8 +509,10 @@
rx_valid = dw_readl(dev, DW_IC_RXFLR);
- for (; len > 0 && rx_valid > 0; len--, rx_valid--)
+ for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
*buf++ = dw_readl(dev, DW_IC_DATA_CMD);
+ dev->rx_outstanding--;
+ }
if (len > 0) {
dev->status |= STATUS_READ_IN_PROGRESS;
@@ -561,6 +570,7 @@
dev->msg_err = 0;
dev->status = STATUS_IDLE;
dev->abort_source = 0;
+ dev->rx_outstanding = 0;
ret = i2c_dw_wait_bus_not_busy(dev);
if (ret < 0)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9c1840e..e761ad1 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -60,6 +60,7 @@
* @adapter: i2c subsystem adapter node
* @tx_fifo_depth: depth of the hardware tx fifo
* @rx_fifo_depth: depth of the hardware rx fifo
+ * @rx_outstanding: current master-rx elements in tx fifo
*/
struct dw_i2c_dev {
struct device *dev;
@@ -88,6 +89,7 @@
u32 master_cfg;
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
+ int rx_outstanding;
};
#define ACCESS_SWAP 0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 8ec9133..35b70a1 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -69,6 +69,7 @@
static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT33C2", 0 },
{ "INT33C3", 0 },
+ { "80860F41", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e1cf2e0..3a6903f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -231,7 +231,11 @@
static unsigned int disable_features;
module_param(disable_features, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+ "\t\t 0x01 disable SMBus PEC\n"
+ "\t\t 0x02 disable the block buffer\n"
+ "\t\t 0x08 disable the I2C block read functionality\n"
+ "\t\t 0x10 don't use interrupts ");
/* Make sure the SMBus host is ready to start transmitting.
Return 0 if it is, -EBUSY if it is not. */
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 3bbd65d..1a3abd6 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -252,7 +252,7 @@
writel(drv_data->cntl_bits,
drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
drv_data->block = 0;
- wake_up_interruptible(&drv_data->waitq);
+ wake_up(&drv_data->waitq);
break;
case MV64XXX_I2C_ACTION_CONTINUE:
@@ -300,7 +300,7 @@
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
drv_data->block = 0;
- wake_up_interruptible(&drv_data->waitq);
+ wake_up(&drv_data->waitq);
break;
case MV64XXX_I2C_ACTION_INVALID:
@@ -315,7 +315,7 @@
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
drv_data->block = 0;
- wake_up_interruptible(&drv_data->waitq);
+ wake_up(&drv_data->waitq);
break;
}
}
@@ -381,7 +381,7 @@
unsigned long flags;
char abort = 0;
- time_left = wait_event_interruptible_timeout(drv_data->waitq,
+ time_left = wait_event_timeout(drv_data->waitq,
!drv_data->block, drv_data->adapter.timeout);
spin_lock_irqsave(&drv_data->lock, flags);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 6b63cc7..48e31ed 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -892,7 +892,8 @@
}
static DEVICE_ATTR(new_device, S_IWUSR, NULL, i2c_sysfs_new_device);
-static DEVICE_ATTR(delete_device, S_IWUSR, NULL, i2c_sysfs_delete_device);
+static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
+ i2c_sysfs_delete_device);
static struct attribute *i2c_adapter_attrs[] = {
&dev_attr_name.attr,
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 9f3a8ef..b3d03d3 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -390,8 +390,8 @@
#ifdef CONFIG_PM_SLEEP
static int exynos_adc_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct exynos_adc *info = platform_get_drvdata(pdev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct exynos_adc *info = iio_priv(indio_dev);
u32 con;
if (info->version == ADC_V2) {
@@ -413,8 +413,8 @@
static int exynos_adc_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct exynos_adc *info = platform_get_drvdata(pdev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct exynos_adc *info = iio_priv(indio_dev);
int ret;
ret = regulator_enable(info->vdd);
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index bd33473..ed9bc8a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -312,6 +312,8 @@
goto read_error;
*val = *val >> ch->scan_type.shift;
+
+ err = st_sensors_set_enable(indio_dev, false);
}
mutex_unlock(&indio_dev->mlock);
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index f4a6f08..b61160b 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -5,7 +5,7 @@
config AD5064
tristate "Analog Devices AD5064 and similar multi-channel DAC driver"
- depends on (SPI_MASTER || I2C)
+ depends on (SPI_MASTER && I2C!=m) || I2C
help
Say yes here to build support for Analog Devices AD5024, AD5025, AD5044,
AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668,
@@ -27,7 +27,7 @@
config AD5380
tristate "Analog Devices AD5380/81/82/83/84/90/91/92 DAC driver"
- depends on (SPI_MASTER || I2C)
+ depends on (SPI_MASTER && I2C!=m) || I2C
select REGMAP_I2C if I2C
select REGMAP_SPI if SPI_MASTER
help
@@ -57,7 +57,7 @@
config AD5446
tristate "Analog Devices AD5446 and similar single channel DACs driver"
- depends on (SPI_MASTER || I2C)
+ depends on (SPI_MASTER && I2C!=m) || I2C
help
Say yes here to build support for Analog Devices AD5300, AD5301, AD5310,
AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453,
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 0bfd8cf..5c68e44 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -342,10 +342,10 @@
wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
- switch (wacom->id[idx] & 0xfffff) {
+ switch (wacom->id[idx]) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
- case 0x20802: /* Intuos4 Inking Pen */
+ case 0x120802: /* Intuos4/5 Inking Pen */
case 0x012:
wacom->tool[idx] = BTN_TOOL_PENCIL;
break;
@@ -356,11 +356,13 @@
case 0x823: /* Intuos3 Grip Pen */
case 0x813: /* Intuos3 Classic Pen */
case 0x885: /* Intuos3 Marker Pen */
- case 0x802: /* Intuos4 General Pen */
- case 0x804: /* Intuos4 Marker Pen */
- case 0x40802: /* Intuos4 Classic Pen */
- case 0x18802: /* DTH2242 Grip Pen */
+ case 0x802: /* Intuos4/5 13HD/24HD General Pen */
+ case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */
case 0x022:
+ case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */
+ case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */
+ case 0x160802: /* Cintiq 13HD Pro Pen */
+ case 0x180802: /* DTH2242 Pen */
wacom->tool[idx] = BTN_TOOL_PEN;
break;
@@ -391,10 +393,14 @@
case 0x82b: /* Intuos3 Grip Pen Eraser */
case 0x81b: /* Intuos3 Classic Pen Eraser */
case 0x91b: /* Intuos3 Airbrush Eraser */
- case 0x80c: /* Intuos4 Marker Pen Eraser */
- case 0x80a: /* Intuos4 General Pen Eraser */
- case 0x4080a: /* Intuos4 Classic Pen Eraser */
- case 0x90a: /* Intuos4 Airbrush Eraser */
+ case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */
+ case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */
+ case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
+ case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */
+ case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
+ case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
+ case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */
+ case 0x18080a: /* DTH2242 Eraser */
wacom->tool[idx] = BTN_TOOL_RUBBER;
break;
@@ -402,7 +408,8 @@
case 0x912:
case 0x112:
case 0x913: /* Intuos3 Airbrush */
- case 0x902: /* Intuos4 Airbrush */
+ case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
+ case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */
wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
break;
@@ -533,10 +540,8 @@
input_report_key(input, BTN_8, (data[3] & 0x80));
}
if (data[1] | (data[2] & 0x01) | data[3]) {
- input_report_key(input, wacom->tool[1], 1);
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
} else {
- input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
} else if (features->type == DTK) {
@@ -546,6 +551,26 @@
input_report_key(input, BTN_3, (data[6] & 0x08));
input_report_key(input, BTN_4, (data[6] & 0x10));
input_report_key(input, BTN_5, (data[6] & 0x20));
+ if (data[6] & 0x3f) {
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_abs(input, ABS_MISC, 0);
+ }
+ } else if (features->type == WACOM_13HD) {
+ input_report_key(input, BTN_0, (data[3] & 0x01));
+ input_report_key(input, BTN_1, (data[4] & 0x01));
+ input_report_key(input, BTN_2, (data[4] & 0x02));
+ input_report_key(input, BTN_3, (data[4] & 0x04));
+ input_report_key(input, BTN_4, (data[4] & 0x08));
+ input_report_key(input, BTN_5, (data[4] & 0x10));
+ input_report_key(input, BTN_6, (data[4] & 0x20));
+ input_report_key(input, BTN_7, (data[4] & 0x40));
+ input_report_key(input, BTN_8, (data[4] & 0x80));
+ if ((data[3] & 0x01) | data[4]) {
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_abs(input, ABS_MISC, 0);
+ }
} else if (features->type == WACOM_24HD) {
input_report_key(input, BTN_0, (data[6] & 0x01));
input_report_key(input, BTN_1, (data[6] & 0x02));
@@ -590,10 +615,8 @@
}
if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) {
- input_report_key(input, wacom->tool[1], 1);
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
} else {
- input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
} else if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
@@ -618,10 +641,8 @@
}
if (data[2] | (data[3] & 0x01) | data[4] | data[5]) {
- input_report_key(input, wacom->tool[1], 1);
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
} else {
- input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
} else {
@@ -668,10 +689,8 @@
if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
data[2] | (data[3] & 0x1f) | data[4] | data[8] |
(data[7] & 0x01)) {
- input_report_key(input, wacom->tool[1], 1);
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
} else {
- input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
}
@@ -1301,6 +1320,7 @@
case INTUOS4L:
case CINTIQ:
case WACOM_BEE:
+ case WACOM_13HD:
case WACOM_21UX2:
case WACOM_22HD:
case WACOM_24HD:
@@ -1530,15 +1550,15 @@
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
/* fall through */
case DTK:
for (i = 0; i < 6; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
- input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
- input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
-
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac);
@@ -1579,6 +1599,15 @@
wacom_setup_cintiq(wacom_wac);
break;
+ case WACOM_13HD:
+ for (i = 0; i < 9; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+ wacom_setup_cintiq(wacom_wac);
+ break;
+
case INTUOS3:
case INTUOS3L:
__set_bit(BTN_4, input_dev->keybit);
@@ -1950,6 +1979,9 @@
static const struct wacom_features wacom_features_0xC6 =
{ "Wacom Cintiq 12WX", WACOM_PKGLEN_INTUOS, 53020, 33440, 1023,
63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x304 =
+ { "Wacom Cintiq 13HD", WACOM_PKGLEN_INTUOS, 59552, 33848, 1023,
+ 63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xC7 =
{ "Wacom DTU1931", WACOM_PKGLEN_GRAPHIRE, 37832, 30305, 511,
0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1959,6 +1991,9 @@
static const struct wacom_features wacom_features_0xF0 =
{ "Wacom DTU1631", WACOM_PKGLEN_GRAPHIRE, 34623, 19553, 511,
0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x57 =
+ { "Wacom DTK2241", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047,
+ 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES};
static const struct wacom_features wacom_features_0x59 = /* Pen */
{ "Wacom DTH2242", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047,
63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
@@ -1972,6 +2007,12 @@
static const struct wacom_features wacom_features_0xFA =
{ "Wacom Cintiq 22HD", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047,
63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x5B =
+ { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047,
+ 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
+static const struct wacom_features wacom_features_0x5E =
+ { "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 };
static const struct wacom_features wacom_features_0x90 =
{ "Wacom ISDv4 90", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2143,8 +2184,11 @@
{ USB_DEVICE_WACOM(0x43) },
{ USB_DEVICE_WACOM(0x44) },
{ USB_DEVICE_WACOM(0x45) },
+ { USB_DEVICE_WACOM(0x57) },
{ USB_DEVICE_WACOM(0x59) },
{ USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) },
+ { USB_DEVICE_WACOM(0x5B) },
+ { USB_DEVICE_DETAILED(0x5E, USB_CLASS_HID, 0, 0) },
{ USB_DEVICE_WACOM(0xB0) },
{ USB_DEVICE_WACOM(0xB1) },
{ USB_DEVICE_WACOM(0xB2) },
@@ -2205,6 +2249,7 @@
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
{ USB_DEVICE_WACOM(0x10D) },
+ { USB_DEVICE_WACOM(0x304) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 5f9a772..dfc9e08 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -82,6 +82,7 @@
WACOM_24HD,
CINTIQ,
WACOM_BEE,
+ WACOM_13HD,
WACOM_MO,
WIRELESS,
BAMBOO_PT,
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index 17c9097..39f3df8 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -216,7 +216,7 @@
input_set_abs_params(input_dev,
ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
input_set_abs_params(input_dev,
- ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0);
+ ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
input_set_drvdata(input_dev, ts);
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index 9b1b274..c123709 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -93,7 +93,7 @@
static inline struct capi_ctr *get_capi_ctr_by_nr(u16 contr)
{
- if (contr - 1 >= CAPI_MAXCONTR)
+ if (contr < 1 || contr - 1 >= CAPI_MAXCONTR)
return NULL;
return capi_controller[contr - 1];
@@ -103,7 +103,7 @@
{
lockdep_assert_held(&capi_controller_lock);
- if (applid - 1 >= CAPI_MAXAPPL)
+ if (applid < 1 || applid - 1 >= CAPI_MAXAPPL)
return NULL;
return capi_applications[applid - 1];
@@ -111,7 +111,7 @@
static inline struct capi20_appl *get_capi_appl_by_nr(u16 applid)
{
- if (applid - 1 >= CAPI_MAXAPPL)
+ if (applid < 1 || applid - 1 >= CAPI_MAXAPPL)
return NULL;
return rcu_dereference(capi_applications[applid - 1]);
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index a0d931b..b02b679 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -107,6 +107,10 @@
return 0;
}
+ ret = devm_gpio_request(parent, template->gpio, template->name);
+ if (ret < 0)
+ return ret;
+
led_dat->cdev.name = template->name;
led_dat->cdev.default_trigger = template->default_trigger;
led_dat->gpio = template->gpio;
@@ -126,10 +130,7 @@
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
- ret = devm_gpio_request_one(parent, template->gpio,
- (led_dat->active_low ^ state) ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- template->name);
+ ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
if (ret < 0)
return ret;
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
index ee14662e..98cae52 100644
--- a/drivers/leds/leds-ot200.c
+++ b/drivers/leds/leds-ot200.c
@@ -47,37 +47,37 @@
{
.name = "led_1",
.port = 0x49,
- .mask = BIT(7),
+ .mask = BIT(6),
},
{
.name = "led_2",
.port = 0x49,
- .mask = BIT(6),
+ .mask = BIT(5),
},
{
.name = "led_3",
.port = 0x49,
- .mask = BIT(5),
+ .mask = BIT(4),
},
{
.name = "led_4",
.port = 0x49,
- .mask = BIT(4),
+ .mask = BIT(3),
},
{
.name = "led_5",
.port = 0x49,
- .mask = BIT(3),
+ .mask = BIT(2),
},
{
.name = "led_6",
.port = 0x49,
- .mask = BIT(2),
+ .mask = BIT(1),
},
{
.name = "led_7",
.port = 0x49,
- .mask = BIT(1),
+ .mask = BIT(0),
}
};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d9aed15..d54e985 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -579,7 +579,7 @@
config AB8500_DEBUG
bool "Enable debug info via debugfs"
- depends on AB8500_CORE && DEBUG_FS
+ depends on AB8500_GPADC && DEBUG_FS
default y if DEBUG_FS
help
Select this option if you want debug information using the debug
@@ -818,6 +818,7 @@
config MFD_TPS65912
bool "TI TPS65912 Power Management chip"
depends on GPIOLIB
+ select MFD_CORE
help
If you say yes here you get support for the TPS65912 series of
PM chips.
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 8e8a016..258b367 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -868,6 +868,15 @@
#ifdef CONFIG_DEBUG_FS
static struct resource ab8500_debug_resources[] = {
{
+ .name = "IRQ_AB8500",
+ /*
+ * Number will be filled in. NOTE: this is deliberately
+ * not flagged as an IRQ in ordet to avoid remapping using
+ * the irqdomain in the MFD core, so that this IRQ passes
+ * unremapped to the debug code.
+ */
+ },
+ {
.name = "IRQ_FIRST",
.start = AB8500_INT_MAIN_EXT_CH_NOT_OK,
.end = AB8500_INT_MAIN_EXT_CH_NOT_OK,
@@ -1051,6 +1060,7 @@
},
{
.name = "ab8500-gpadc",
+ .of_compatible = "stericsson,ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
.resources = ab8500_gpadc_resources,
},
@@ -1097,7 +1107,7 @@
.of_compatible = "stericsson,ab8500-denc",
},
{
- .name = "ab8500-gpio",
+ .name = "pinctrl-ab8500",
.of_compatible = "stericsson,ab8500-gpio",
},
{
@@ -1208,6 +1218,7 @@
},
{
.name = "ab8500-gpadc",
+ .of_compatible = "stericsson,ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
.resources = ab8505_gpadc_resources,
},
@@ -1234,7 +1245,7 @@
.name = "ab8500-leds",
},
{
- .name = "ab8500-gpio",
+ .name = "pinctrl-ab8505",
},
{
.name = "ab8500-usb",
@@ -1271,6 +1282,7 @@
},
{
.name = "ab8500-gpadc",
+ .of_compatible = "stericsson,ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
.resources = ab8505_gpadc_resources,
},
@@ -1302,7 +1314,7 @@
.resources = ab8500_temp_resources,
},
{
- .name = "ab8500-gpio",
+ .name = "pinctrl-ab8540",
},
{
.name = "ab8540-usb",
@@ -1712,6 +1724,12 @@
if (ret)
return ret;
+#if CONFIG_DEBUG_FS
+ /* Pass to debugfs */
+ ab8500_debug_resources[0].start = ab8500->irq;
+ ab8500_debug_resources[0].end = ab8500->irq;
+#endif
+
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index b88bbbc..37b7ce4c7 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -91,12 +91,10 @@
#include <linux/ctype.h>
#endif
-/* TODO: this file should not reference IRQ_DB8500_AB8500! */
-#include <mach/irqs.h>
-
static u32 debug_bank;
static u32 debug_address;
+static int irq_ab8500;
static int irq_first;
static int irq_last;
static u32 *irq_count;
@@ -1589,7 +1587,7 @@
{
if (line < num_interrupt_lines) {
num_interrupts[line]++;
- if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500))
+ if (suspend_test_wake_cause_interrupt_is_mine(irq_ab8500))
num_wake_interrupts[line]++;
}
}
@@ -2941,6 +2939,7 @@
struct dentry *file;
int ret = -ENOMEM;
struct ab8500 *ab8500;
+ struct resource *res;
debug_bank = AB8500_MISC;
debug_address = AB8500_REV_REG & 0x00FF;
@@ -2959,6 +2958,15 @@
if (!event_name)
goto out_freedev_attr;
+ res = platform_get_resource_byname(plf, 0, "IRQ_AB8500");
+ if (!res) {
+ dev_err(&plf->dev, "AB8500 irq not found, err %d\n",
+ irq_first);
+ ret = -ENXIO;
+ goto out_freeevent_name;
+ }
+ irq_ab8500 = res->start;
+
irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
if (irq_first < 0) {
dev_err(&plf->dev, "First irq not found, err %d\n",
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 5e65b28..13f7866 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -907,14 +907,17 @@
static int ab8500_gpadc_resume(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+ int ret;
- regulator_enable(gpadc->regu);
+ ret = regulator_enable(gpadc->regu);
+ if (ret)
+ dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
pm_runtime_mark_last_busy(gpadc->dev);
pm_runtime_put_autosuspend(gpadc->dev);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
- return 0;
+ return ret;
}
static int ab8500_gpadc_probe(struct platform_device *pdev)
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index fbca1ce..8e0dae5 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -23,7 +23,7 @@
static struct device *sysctrl_dev;
-void ab8500_power_off(void)
+static void ab8500_power_off(void)
{
sigset_t old;
sigset_t all;
@@ -104,7 +104,7 @@
plat = dev_get_platdata(sysctrl_dev->parent);
pdata = plat->sysctrl;
- if (pdata->reboot_reason_code)
+ if (pdata && pdata->reboot_reason_code)
reason = pdata->reboot_reason_code(cmd);
else
pr_warn("[%s] No reboot reason set. Default reason %d\n",
@@ -188,14 +188,15 @@
plat = dev_get_platdata(pdev->dev.parent);
- if (!(plat && plat->sysctrl))
+ if (!plat)
return -EINVAL;
- if (plat->pm_power_off)
+ sysctrl_dev = &pdev->dev;
+
+ if (!pm_power_off)
pm_power_off = ab8500_power_off;
pdata = plat->sysctrl;
-
if (pdata) {
int last, ret, i, j;
@@ -226,6 +227,10 @@
static int ab8500_sysctrl_remove(struct platform_device *pdev)
{
sysctrl_dev = NULL;
+
+ if (pm_power_off == ab8500_power_off)
+ pm_power_off = NULL;
+
return 0;
}
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index 9818afb..3714acb 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -156,7 +156,7 @@
void abx500_dump_all_banks(void)
{
struct abx500_ops *ops;
- struct device dummy_child = {0};
+ struct device dummy_child = {NULL};
struct abx500_device_entry *dev_entry;
list_for_each_entry(dev_entry, &abx500_list, list) {
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 19193cf..367ccb5 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -120,7 +120,7 @@
for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) {
if (*ptr == EC_MSG_HEADER) {
- dev_dbg(ec_dev->dev, "msg found at %ld\n",
+ dev_dbg(ec_dev->dev, "msg found at %zd\n",
ptr - ec_dev->din);
break;
}
@@ -154,7 +154,7 @@
* maximum-supported transfer size.
*/
todo = min(need_len, 256);
- dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%ld\n",
+ dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%zd\n",
todo, need_len, ptr - ec_dev->din);
memset(&trans, '\0', sizeof(trans));
@@ -178,7 +178,7 @@
need_len -= todo;
}
- dev_dbg(ec_dev->dev, "loop done, ptr=%ld\n", ptr - ec_dev->din);
+ dev_dbg(ec_dev->dev, "loop done, ptr=%zd\n", ptr - ec_dev->din);
return 0;
}
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 319b8ab..66f8097 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -1613,6 +1613,8 @@
if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
divsel = dsiclk[n].divsel;
+ else
+ dsiclk[n].divsel = divsel;
switch (divsel) {
case PRCM_DSI_PLLOUT_SEL_PHI_4:
@@ -3095,6 +3097,7 @@
.num_resources = ARRAY_SIZE(db8500_thsens_resources),
.resources = db8500_thsens_resources,
.platform_data = &db8500_thsens_data,
+ .pdata_size = sizeof(db8500_thsens_data),
},
};
diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
index de48b4e..6f1ef63 100644
--- a/drivers/mfd/si476x-cmd.c
+++ b/drivers/mfd/si476x-cmd.c
@@ -29,6 +29,8 @@
#include <linux/mfd/si476x-core.h>
+#include <asm/unaligned.h>
+
#define msb(x) ((u8)((u16) x >> 8))
#define lsb(x) ((u8)((u16) x & 0x00FF))
@@ -150,7 +152,7 @@
SI476X_ACF_SOFTMUTE_INT = (1 << 0),
SI476X_ACF_SMUTE = (1 << 0),
- SI476X_ACF_SMATTN = 0b11111,
+ SI476X_ACF_SMATTN = 0x1f,
SI476X_ACF_PILOT = (1 << 7),
SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT,
};
@@ -483,7 +485,7 @@
if (err < 0)
return err;
else
- return be16_to_cpup((__be16 *)(resp + 2));
+ return get_unaligned_be16(resp + 2);
}
EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
@@ -772,18 +774,18 @@
if (!report)
return err;
- report->snrhint = 0b00001000 & resp[1];
- report->snrlint = 0b00000100 & resp[1];
- report->rssihint = 0b00000010 & resp[1];
- report->rssilint = 0b00000001 & resp[1];
+ report->snrhint = 0x08 & resp[1];
+ report->snrlint = 0x04 & resp[1];
+ report->rssihint = 0x02 & resp[1];
+ report->rssilint = 0x01 & resp[1];
- report->bltf = 0b10000000 & resp[2];
- report->snr_ready = 0b00100000 & resp[2];
- report->rssiready = 0b00001000 & resp[2];
- report->afcrl = 0b00000010 & resp[2];
- report->valid = 0b00000001 & resp[2];
+ report->bltf = 0x80 & resp[2];
+ report->snr_ready = 0x20 & resp[2];
+ report->rssiready = 0x08 & resp[2];
+ report->afcrl = 0x02 & resp[2];
+ report->valid = 0x01 & resp[2];
- report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->readfreq = get_unaligned_be16(resp + 3);
report->freqoff = resp[5];
report->rssi = resp[6];
report->snr = resp[7];
@@ -931,26 +933,26 @@
if (err < 0 || report == NULL)
return err;
- report->rdstpptyint = 0b00010000 & resp[1];
- report->rdspiint = 0b00001000 & resp[1];
- report->rdssyncint = 0b00000010 & resp[1];
- report->rdsfifoint = 0b00000001 & resp[1];
+ report->rdstpptyint = 0x10 & resp[1];
+ report->rdspiint = 0x08 & resp[1];
+ report->rdssyncint = 0x02 & resp[1];
+ report->rdsfifoint = 0x01 & resp[1];
- report->tpptyvalid = 0b00010000 & resp[2];
- report->pivalid = 0b00001000 & resp[2];
- report->rdssync = 0b00000010 & resp[2];
- report->rdsfifolost = 0b00000001 & resp[2];
+ report->tpptyvalid = 0x10 & resp[2];
+ report->pivalid = 0x08 & resp[2];
+ report->rdssync = 0x02 & resp[2];
+ report->rdsfifolost = 0x01 & resp[2];
- report->tp = 0b00100000 & resp[3];
- report->pty = 0b00011111 & resp[3];
+ report->tp = 0x20 & resp[3];
+ report->pty = 0x1f & resp[3];
- report->pi = be16_to_cpup((__be16 *)(resp + 4));
+ report->pi = get_unaligned_be16(resp + 4);
report->rdsfifoused = resp[6];
- report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7];
- report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7];
- report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7];
- report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_A] = 0xc0 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_B] = 0x30 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_C] = 0x0c & resp[7];
+ report->ble[V4L2_RDS_BLOCK_D] = 0x03 & resp[7];
report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
@@ -991,9 +993,9 @@
SI476X_DEFAULT_TIMEOUT);
if (!err) {
- report->expected = be16_to_cpup((__be16 *)(resp + 2));
- report->received = be16_to_cpup((__be16 *)(resp + 4));
- report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6));
+ report->expected = get_unaligned_be16(resp + 2);
+ report->received = get_unaligned_be16(resp + 4);
+ report->uncorrectable = get_unaligned_be16(resp + 6);
}
return err;
@@ -1005,7 +1007,7 @@
{
u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP];
const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
- mode & 0b111,
+ mode & 0x07,
};
return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
@@ -1162,7 +1164,7 @@
const int am_freq = tuneargs->freq;
u8 resp[CMD_AM_TUNE_FREQ_NRESP];
const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
- (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
+ (tuneargs->zifsr << 6) | (tuneargs->injside & 0x03),
msb(am_freq),
lsb(am_freq),
};
@@ -1197,20 +1199,20 @@
if (err < 0 || report == NULL)
return err;
- report->multhint = 0b10000000 & resp[1];
- report->multlint = 0b01000000 & resp[1];
- report->snrhint = 0b00001000 & resp[1];
- report->snrlint = 0b00000100 & resp[1];
- report->rssihint = 0b00000010 & resp[1];
- report->rssilint = 0b00000001 & resp[1];
+ report->multhint = 0x80 & resp[1];
+ report->multlint = 0x40 & resp[1];
+ report->snrhint = 0x08 & resp[1];
+ report->snrlint = 0x04 & resp[1];
+ report->rssihint = 0x02 & resp[1];
+ report->rssilint = 0x01 & resp[1];
- report->bltf = 0b10000000 & resp[2];
- report->snr_ready = 0b00100000 & resp[2];
- report->rssiready = 0b00001000 & resp[2];
- report->afcrl = 0b00000010 & resp[2];
- report->valid = 0b00000001 & resp[2];
+ report->bltf = 0x80 & resp[2];
+ report->snr_ready = 0x20 & resp[2];
+ report->rssiready = 0x08 & resp[2];
+ report->afcrl = 0x02 & resp[2];
+ report->valid = 0x01 & resp[2];
- report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->readfreq = get_unaligned_be16(resp + 3);
report->freqoff = resp[5];
report->rssi = resp[6];
report->snr = resp[7];
@@ -1218,7 +1220,7 @@
report->hassi = resp[10];
report->mult = resp[11];
report->dev = resp[12];
- report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->readantcap = get_unaligned_be16(resp + 13);
report->assi = resp[15];
report->usn = resp[16];
@@ -1251,20 +1253,20 @@
if (err < 0 || report == NULL)
return err;
- report->multhint = 0b10000000 & resp[1];
- report->multlint = 0b01000000 & resp[1];
- report->snrhint = 0b00001000 & resp[1];
- report->snrlint = 0b00000100 & resp[1];
- report->rssihint = 0b00000010 & resp[1];
- report->rssilint = 0b00000001 & resp[1];
+ report->multhint = 0x80 & resp[1];
+ report->multlint = 0x40 & resp[1];
+ report->snrhint = 0x08 & resp[1];
+ report->snrlint = 0x04 & resp[1];
+ report->rssihint = 0x02 & resp[1];
+ report->rssilint = 0x01 & resp[1];
- report->bltf = 0b10000000 & resp[2];
- report->snr_ready = 0b00100000 & resp[2];
- report->rssiready = 0b00001000 & resp[2];
- report->afcrl = 0b00000010 & resp[2];
- report->valid = 0b00000001 & resp[2];
+ report->bltf = 0x80 & resp[2];
+ report->snr_ready = 0x20 & resp[2];
+ report->rssiready = 0x08 & resp[2];
+ report->afcrl = 0x02 & resp[2];
+ report->valid = 0x01 & resp[2];
- report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->readfreq = get_unaligned_be16(resp + 3);
report->freqoff = resp[5];
report->rssi = resp[6];
report->snr = resp[7];
@@ -1272,7 +1274,7 @@
report->hassi = resp[10];
report->mult = resp[11];
report->dev = resp[12];
- report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->readantcap = get_unaligned_be16(resp + 13);
report->assi = resp[15];
report->usn = resp[16];
@@ -1306,21 +1308,21 @@
if (err < 0 || report == NULL)
return err;
- report->multhint = 0b10000000 & resp[1];
- report->multlint = 0b01000000 & resp[1];
- report->snrhint = 0b00001000 & resp[1];
- report->snrlint = 0b00000100 & resp[1];
- report->rssihint = 0b00000010 & resp[1];
- report->rssilint = 0b00000001 & resp[1];
+ report->multhint = 0x80 & resp[1];
+ report->multlint = 0x40 & resp[1];
+ report->snrhint = 0x08 & resp[1];
+ report->snrlint = 0x04 & resp[1];
+ report->rssihint = 0x02 & resp[1];
+ report->rssilint = 0x01 & resp[1];
- report->bltf = 0b10000000 & resp[2];
- report->snr_ready = 0b00100000 & resp[2];
- report->rssiready = 0b00001000 & resp[2];
- report->injside = 0b00000100 & resp[2];
- report->afcrl = 0b00000010 & resp[2];
- report->valid = 0b00000001 & resp[2];
+ report->bltf = 0x80 & resp[2];
+ report->snr_ready = 0x20 & resp[2];
+ report->rssiready = 0x08 & resp[2];
+ report->injside = 0x04 & resp[2];
+ report->afcrl = 0x02 & resp[2];
+ report->valid = 0x01 & resp[2];
- report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->readfreq = get_unaligned_be16(resp + 3);
report->freqoff = resp[5];
report->rssi = resp[6];
report->snr = resp[7];
@@ -1329,7 +1331,7 @@
report->hassi = resp[10];
report->mult = resp[11];
report->dev = resp[12];
- report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->readantcap = get_unaligned_be16(resp + 13);
report->assi = resp[15];
report->usn = resp[16];
@@ -1337,7 +1339,7 @@
report->rdsdev = resp[18];
report->assidev = resp[19];
report->strongdev = resp[20];
- report->rdspi = be16_to_cpup((__be16 *)(resp + 21));
+ report->rdspi = get_unaligned_be16(resp + 21);
return err;
}
diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c
index 7014167..c37eeed 100644
--- a/drivers/misc/dummy-irq.c
+++ b/drivers/misc/dummy-irq.c
@@ -19,7 +19,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
-static int irq;
+static int irq = -1;
static irqreturn_t dummy_interrupt(int irq, void *dev_id)
{
@@ -36,6 +36,10 @@
static int __init dummy_irq_init(void)
{
+ if (irq < 0) {
+ printk(KERN_ERR "dummy-irq: no IRQ given. Use irq=N\n");
+ return -EIO;
+ }
if (request_irq(irq, &dummy_interrupt, IRQF_SHARED, "dummy_irq", &irq)) {
printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq);
return -EIO;
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 1e935ea..9ecd49a 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -496,6 +496,8 @@
}
}
+ device->event_cb = NULL;
+
mutex_unlock(&dev->device_lock);
if (!device->ops || !device->ops->disable)
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 7c44c8d..053139f 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -489,11 +489,16 @@
/* find ME client we're trying to connect to */
i = mei_me_cl_by_uuid(dev, &data->in_client_uuid);
- if (i >= 0 && !dev->me_clients[i].props.fixed_address) {
- cl->me_client_id = dev->me_clients[i].client_id;
- cl->state = MEI_FILE_CONNECTING;
+ if (i < 0 || dev->me_clients[i].props.fixed_address) {
+ dev_dbg(&dev->pdev->dev, "Cannot connect to FW Client UUID = %pUl\n",
+ &data->in_client_uuid);
+ rets = -ENODEV;
+ goto end;
}
+ cl->me_client_id = dev->me_clients[i].client_id;
+ cl->state = MEI_FILE_CONNECTING;
+
dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n",
cl->me_client_id);
dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n",
@@ -527,11 +532,6 @@
goto end;
}
- if (cl->state != MEI_FILE_CONNECTING) {
- rets = -ENODEV;
- goto end;
- }
-
/* prepare the output buffer */
client = &data->out_client_properties;
@@ -543,7 +543,6 @@
rets = mei_cl_connect(cl, file);
end:
- dev_dbg(&dev->pdev->dev, "free connect cb memory.");
return rets;
}
diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig
index ea98f7e..39c2eca 100644
--- a/drivers/misc/vmw_vmci/Kconfig
+++ b/drivers/misc/vmw_vmci/Kconfig
@@ -4,7 +4,7 @@
config VMWARE_VMCI
tristate "VMware VMCI Driver"
- depends on X86 && PCI && NET
+ depends on X86 && PCI
help
This is VMware's Virtual Machine Communication Interface. It enables
high-speed communication between host and guest in a virtual
diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index d94245d..8ff2e5e 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -23,7 +23,7 @@
#include <linux/pagemap.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/socket.h>
+#include <linux/uio.h>
#include <linux/wait.h>
#include <linux/vmalloc.h>
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index fc58d11..390061d 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2360,14 +2360,15 @@
}
/**
- * bond_3ad_get_active_agg_info - get information of the active aggregator
+ * __bond_3ad_get_active_agg_info - get information of the active aggregator
* @bond: bonding struct to work on
* @ad_info: ad_info struct to fill with the bond's info
*
* Returns: 0 on success
* < 0 on error
*/
-int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
+int __bond_3ad_get_active_agg_info(struct bonding *bond,
+ struct ad_info *ad_info)
{
struct aggregator *aggregator = NULL;
struct port *port;
@@ -2391,6 +2392,18 @@
return -1;
}
+/* Wrapper used to hold bond->lock so no slave manipulation can occur */
+int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
+{
+ int ret;
+
+ read_lock(&bond->lock);
+ ret = __bond_3ad_get_active_agg_info(bond, ad_info);
+ read_unlock(&bond->lock);
+
+ return ret;
+}
+
int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
{
struct slave *slave, *start_at;
@@ -2402,8 +2415,8 @@
struct ad_info ad_info;
int res = 1;
- if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
- pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n",
+ if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
+ pr_debug("%s: Error: __bond_3ad_get_active_agg_info failed\n",
dev->name);
goto out;
}
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index 0cfaa4a..5d91ad0 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -273,6 +273,8 @@
void bond_3ad_adapter_duplex_changed(struct slave *slave);
void bond_3ad_handle_link_change(struct slave *slave, char link);
int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
+int __bond_3ad_get_active_agg_info(struct bonding *bond,
+ struct ad_info *ad_info);
int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond,
struct slave *slave);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d0aade0..29b846c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1362,6 +1362,7 @@
slave->dev->features,
mask);
}
+ features = netdev_add_tso_features(features, mask);
out:
read_unlock(&bond->lock);
@@ -2555,8 +2556,8 @@
{
struct sk_buff *skb;
- pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
- slave_dev->name, dest_ip, src_ip, vlan_id);
+ pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op,
+ slave_dev->name, &dest_ip, &src_ip, vlan_id);
skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
NULL, slave_dev->dev_addr, NULL);
@@ -2588,7 +2589,7 @@
__be32 addr;
if (!targets[i])
break;
- pr_debug("basa: target %x\n", targets[i]);
+ pr_debug("basa: target %pI4\n", &targets[i]);
if (!bond_vlan_used(bond)) {
pr_debug("basa: empty vlan: arp_send\n");
addr = bond_confirm_addr(bond->dev, targets[i], 0);
@@ -4470,7 +4471,7 @@
static int bond_check_params(struct bond_params *params)
{
- int arp_validate_value, fail_over_mac_value, primary_reselect_value;
+ int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
/*
* Convert string parameters.
@@ -4650,19 +4651,18 @@
arp_interval = BOND_LINK_ARP_INTERV;
}
- for (arp_ip_count = 0;
- (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count];
- arp_ip_count++) {
+ for (arp_ip_count = 0, i = 0;
+ (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
/* not complete check, but should be good enough to
catch mistakes */
- __be32 ip = in_aton(arp_ip_target[arp_ip_count]);
- if (!isdigit(arp_ip_target[arp_ip_count][0]) ||
- ip == 0 || ip == htonl(INADDR_BROADCAST)) {
+ __be32 ip = in_aton(arp_ip_target[i]);
+ if (!isdigit(arp_ip_target[i][0]) || ip == 0 ||
+ ip == htonl(INADDR_BROADCAST)) {
pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
- arp_ip_target[arp_ip_count]);
+ arp_ip_target[i]);
arp_interval = 0;
} else {
- arp_target[arp_ip_count] = ip;
+ arp_target[arp_ip_count++] = ip;
}
}
@@ -4696,8 +4696,6 @@
if (miimon) {
pr_info("MII link monitoring set to %d ms\n", miimon);
} else if (arp_interval) {
- int i;
-
pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
arp_interval,
arp_validate_tbl[arp_validate_value].modename,
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 94d06f1..4060d41 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -130,7 +130,7 @@
seq_printf(seq, "Aggregator selection policy (ad_select): %s\n",
ad_select_tbl[bond->params.ad_select].modename);
- if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
+ if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
seq_printf(seq, "bond %s has no active aggregator\n",
bond->dev->name);
} else {
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ea7a388..d7434e0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -316,6 +316,9 @@
int new_value, ret = count;
struct bonding *bond = to_bond(d);
+ if (!rtnl_trylock())
+ return restart_syscall();
+
if (bond->dev->flags & IFF_UP) {
pr_err("unable to update mode of %s because interface is up.\n",
bond->dev->name);
@@ -352,6 +355,7 @@
bond->dev->name, bond_mode_tbl[new_value].modename,
new_value);
out:
+ rtnl_unlock();
return ret;
}
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
@@ -1315,7 +1319,6 @@
}
static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
-
/*
* Show current 802.3ad aggregator ID.
*/
@@ -1329,7 +1332,7 @@
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
- (bond_3ad_get_active_agg_info(bond, &ad_info))
+ bond_3ad_get_active_agg_info(bond, &ad_info)
? 0 : ad_info.aggregator_id);
}
@@ -1351,7 +1354,7 @@
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
- (bond_3ad_get_active_agg_info(bond, &ad_info))
+ bond_3ad_get_active_agg_info(bond, &ad_info)
? 0 : ad_info.ports);
}
@@ -1373,7 +1376,7 @@
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
- (bond_3ad_get_active_agg_info(bond, &ad_info))
+ bond_3ad_get_active_agg_info(bond, &ad_info)
? 0 : ad_info.actor_key);
}
@@ -1395,7 +1398,7 @@
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
count = sprintf(buf, "%d\n",
- (bond_3ad_get_active_agg_info(bond, &ad_info))
+ bond_3ad_get_active_agg_info(bond, &ad_info)
? 0 : ad_info.partner_key);
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index b8fbe26..be59ec4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3313,6 +3313,7 @@
*/
static void bnx2x_set_pbd_gso(struct sk_buff *skb,
struct eth_tx_parse_bd_e1x *pbd,
+ struct eth_tx_start_bd *tx_start_bd,
u32 xmit_type)
{
pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
@@ -3326,11 +3327,14 @@
ip_hdr(skb)->daddr,
0, IPPROTO_TCP, 0));
- } else
+ /* GSO on 57710/57711 needs FW to calculate IP checksum */
+ tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IP_CSUM;
+ } else {
pbd->tcp_pseudo_csum =
bswab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr,
0, IPPROTO_TCP, 0));
+ }
pbd->global_data |=
cpu_to_le16(ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN);
@@ -3814,7 +3818,8 @@
bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
xmit_type);
else
- bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
+ bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd,
+ xmit_type);
}
/* Set the PBD's parsing_data field if not zero
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 728d42a..1f2dd92 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -94,10 +94,10 @@
#define DRV_MODULE_NAME "tg3"
#define TG3_MAJ_NUM 3
-#define TG3_MIN_NUM 131
+#define TG3_MIN_NUM 132
#define DRV_MODULE_VERSION \
__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE "April 09, 2013"
+#define DRV_MODULE_RELDATE "May 21, 2013"
#define RESET_KIND_SHUTDOWN 0
#define RESET_KIND_INIT 1
@@ -2957,6 +2957,31 @@
return 0;
}
+static bool tg3_phy_power_bug(struct tg3 *tp)
+{
+ switch (tg3_asic_rev(tp)) {
+ case ASIC_REV_5700:
+ case ASIC_REV_5704:
+ return true;
+ case ASIC_REV_5780:
+ if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
+ return true;
+ return false;
+ case ASIC_REV_5717:
+ if (!tp->pci_fn)
+ return true;
+ return false;
+ case ASIC_REV_5719:
+ case ASIC_REV_5720:
+ if ((tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
+ !tp->pci_fn)
+ return true;
+ return false;
+ }
+
+ return false;
+}
+
static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
{
u32 val;
@@ -3016,12 +3041,7 @@
/* The PHY should not be powered down on some chips because
* of bugs.
*/
- if (tg3_asic_rev(tp) == ASIC_REV_5700 ||
- tg3_asic_rev(tp) == ASIC_REV_5704 ||
- (tg3_asic_rev(tp) == ASIC_REV_5780 &&
- (tp->phy_flags & TG3_PHYFLG_MII_SERDES)) ||
- (tg3_asic_rev(tp) == ASIC_REV_5717 &&
- !tp->pci_fn))
+ if (tg3_phy_power_bug(tp))
return;
if (tg3_chip_rev(tp) == CHIPREV_5784_AX ||
@@ -7428,6 +7448,20 @@
return (base > 0xffffdcc0) && (base + len + 8 < base);
}
+/* Test for TSO DMA buffers that cross into regions which are within MSS bytes
+ * of any 4GB boundaries: 4G, 8G, etc
+ */
+static inline int tg3_4g_tso_overflow_test(struct tg3 *tp, dma_addr_t mapping,
+ u32 len, u32 mss)
+{
+ if (tg3_asic_rev(tp) == ASIC_REV_5762 && mss) {
+ u32 base = (u32) mapping & 0xffffffff;
+
+ return ((base + len + (mss & 0x3fff)) < base);
+ }
+ return 0;
+}
+
/* Test for DMA addresses > 40-bit */
static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
int len)
@@ -7464,6 +7498,9 @@
if (tg3_4g_overflow_test(map, len))
hwbug = true;
+ if (tg3_4g_tso_overflow_test(tp, map, len, mss))
+ hwbug = true;
+
if (tg3_40bit_overflow_test(tp, map, len))
hwbug = true;
@@ -8874,6 +8911,10 @@
tg3_halt_cpu(tp, RX_CPU_BASE);
}
+ err = tg3_poll_fw(tp);
+ if (err)
+ return err;
+
tw32(GRC_MODE, tp->grc_mode);
if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A0) {
@@ -8904,10 +8945,6 @@
tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
- err = tg3_poll_fw(tp);
- if (err)
- return err;
-
tg3_mdio_start(tp);
if (tg3_flag(tp, PCI_EXPRESS) &&
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 6be513d..c89aa41 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -485,7 +485,8 @@
status = macb_readl(bp, TSR);
macb_writel(bp, TSR, status);
- macb_writel(bp, ISR, MACB_BIT(TCOMP));
+ if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+ macb_writel(bp, ISR, MACB_BIT(TCOMP));
netdev_vdbg(bp->dev, "macb_tx_interrupt status = 0x%03lx\n",
(unsigned long)status);
@@ -738,7 +739,8 @@
* now.
*/
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
- macb_writel(bp, ISR, MACB_BIT(RCOMP));
+ if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+ macb_writel(bp, ISR, MACB_BIT(RCOMP));
if (napi_schedule_prep(&bp->napi)) {
netdev_vdbg(bp->dev, "scheduling RX softirq\n");
@@ -1062,6 +1064,17 @@
}
}
+/*
+ * Configure peripheral capacities according to integration options used
+ */
+static void macb_configure_caps(struct macb *bp)
+{
+ if (macb_is_gem(bp)) {
+ if (GEM_BF(IRQCOR, gem_readl(bp, DCFG1)) == 0)
+ bp->caps |= MACB_CAPS_ISR_CLEAR_ON_WRITE;
+ }
+}
+
static void macb_init_hw(struct macb *bp)
{
u32 config;
@@ -1084,6 +1097,7 @@
bp->duplex = DUPLEX_HALF;
macb_configure_dma(bp);
+ macb_configure_caps(bp);
/* Initialize TX and RX buffers */
macb_writel(bp, RBQP, bp->rx_ring_dma);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 993d703..548c0ec 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -300,6 +300,8 @@
#define MACB_REV_SIZE 16
/* Bitfields in DCFG1. */
+#define GEM_IRQCOR_OFFSET 23
+#define GEM_IRQCOR_SIZE 1
#define GEM_DBWDEF_OFFSET 25
#define GEM_DBWDEF_SIZE 3
@@ -323,6 +325,9 @@
#define MACB_MAN_READ 2
#define MACB_MAN_CODE 2
+/* Capability mask bits */
+#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x1
+
/* Bit manipulation macros */
#define MACB_BIT(name) \
(1 << MACB_##name##_OFFSET)
@@ -574,6 +579,8 @@
unsigned int speed;
unsigned int duplex;
+ u32 caps;
+
phy_interface_t phy_interface;
/* AT91RM9200 transmit */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index fd7b547..a236ecd 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -2976,22 +2976,17 @@
for (i = 0; i < desc_count; i++) {
desc->desc_len = desc->desc_len ? : RESOURCE_DESC_SIZE;
if (((void *)desc + desc->desc_len) >
- (void *)(buf + max_buf_size)) {
- desc = NULL;
- break;
- }
+ (void *)(buf + max_buf_size))
+ return NULL;
if (desc->desc_type == NIC_RESOURCE_DESC_TYPE_V0 ||
desc->desc_type == NIC_RESOURCE_DESC_TYPE_V1)
- break;
+ return desc;
desc = (void *)desc + desc->desc_len;
}
- if (!desc || i == MAX_RESOURCE_DESC)
- return NULL;
-
- return desc;
+ return NULL;
}
/* Uses Mbox */
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index a444110..ca2967b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -780,26 +780,18 @@
if (unlikely(!skb))
return skb;
- if (vlan_tx_tag_present(skb)) {
+ if (vlan_tx_tag_present(skb))
vlan_tag = be_get_tx_vlan_tag(adapter, skb);
- skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
- if (skb)
- skb->vlan_tci = 0;
- }
-
- if (qnq_async_evt_rcvd(adapter) && adapter->pvid) {
- if (!vlan_tag)
- vlan_tag = adapter->pvid;
- if (skip_hw_vlan)
- *skip_hw_vlan = true;
- }
+ else if (qnq_async_evt_rcvd(adapter) && adapter->pvid)
+ vlan_tag = adapter->pvid;
if (vlan_tag) {
skb = __vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
if (unlikely(!skb))
return skb;
-
skb->vlan_tci = 0;
+ if (skip_hw_vlan)
+ *skip_hw_vlan = true;
}
/* Insert the outer VLAN, if any */
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index ca9825c..85a0603 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -109,7 +109,7 @@
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM,
}, {
- .name = "mvf-fec",
+ .name = "mvf600-fec",
.driver_data = FEC_QUIRK_ENET_MAC,
}, {
/* sentinel */
@@ -122,7 +122,7 @@
IMX27_FEC, /* runs on i.mx27/35/51 */
IMX28_FEC,
IMX6Q_FEC,
- MVF_FEC,
+ MVF600_FEC,
};
static const struct of_device_id fec_dt_ids[] = {
@@ -130,7 +130,7 @@
{ .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], },
{ .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], },
{ .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], },
- { .compatible = "fsl,mvf-fec", .data = &fec_devtype[MVF_FEC], },
+ { .compatible = "fsl,mvf600-fec", .data = &fec_devtype[MVF600_FEC], },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fec_dt_ids);
@@ -451,7 +451,7 @@
netif_device_detach(ndev);
napi_disable(&fep->napi);
netif_stop_queue(ndev);
- netif_tx_lock(ndev);
+ netif_tx_lock_bh(ndev);
}
/* Whack a reset. We should wait for this. */
@@ -616,10 +616,10 @@
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
if (netif_running(ndev)) {
- netif_device_attach(ndev);
- napi_enable(&fep->napi);
+ netif_tx_unlock_bh(ndev);
netif_wake_queue(ndev);
- netif_tx_unlock(ndev);
+ napi_enable(&fep->napi);
+ netif_device_attach(ndev);
}
}
diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index 576e4b8..083ea2b4 100644
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -524,6 +524,7 @@
return 0;
no_clock:
+ iounmap(etsects->regs);
no_ioremap:
release_resource(etsects->rsrc);
no_resource:
diff --git a/drivers/net/ethernet/icplus/ipg.h b/drivers/net/ethernet/icplus/ipg.h
index 6ce0273..abb300a 100644
--- a/drivers/net/ethernet/icplus/ipg.h
+++ b/drivers/net/ethernet/icplus/ipg.h
@@ -195,57 +195,57 @@
/* TFD data structure masks. */
/* TFDList, TFC */
-#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFF
-#define IPG_TFC_FRAMEID 0x000000000000FFFF
-#define IPG_TFC_WORDALIGN 0x0000000000030000
-#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000
-#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000
-#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000
-#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000
-#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000
-#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000
-#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000
-#define IPG_TFC_TXINDICATE 0x0000000000400000
-#define IPG_TFC_TXDMAINDICATE 0x0000000000800000
-#define IPG_TFC_FRAGCOUNT 0x000000000F000000
-#define IPG_TFC_VLANTAGINSERT 0x0000000010000000
-#define IPG_TFC_TFDDONE 0x0000000080000000
-#define IPG_TFC_VID 0x00000FFF00000000
-#define IPG_TFC_CFI 0x0000100000000000
-#define IPG_TFC_USERPRIORITY 0x0000E00000000000
+#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFFULL
+#define IPG_TFC_FRAMEID 0x000000000000FFFFULL
+#define IPG_TFC_WORDALIGN 0x0000000000030000ULL
+#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000ULL
+#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000ULL
+#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000ULL
+#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000ULL
+#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000ULL
+#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000ULL
+#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000ULL
+#define IPG_TFC_TXINDICATE 0x0000000000400000ULL
+#define IPG_TFC_TXDMAINDICATE 0x0000000000800000ULL
+#define IPG_TFC_FRAGCOUNT 0x000000000F000000ULL
+#define IPG_TFC_VLANTAGINSERT 0x0000000010000000ULL
+#define IPG_TFC_TFDDONE 0x0000000080000000ULL
+#define IPG_TFC_VID 0x00000FFF00000000ULL
+#define IPG_TFC_CFI 0x0000100000000000ULL
+#define IPG_TFC_USERPRIORITY 0x0000E00000000000ULL
/* TFDList, FragInfo */
-#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFF
-#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFF
-#define IPG_TFI_FRAGLEN 0xFFFF000000000000LL
+#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL
+#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFFULL
+#define IPG_TFI_FRAGLEN 0xFFFF000000000000ULL
/* RFD data structure masks. */
/* RFDList, RFS */
-#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFF
-#define IPG_RFS_RXFRAMELEN 0x000000000000FFFF
-#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000
-#define IPG_RFS_RXRUNTFRAME 0x0000000000020000
-#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000
-#define IPG_RFS_RXFCSERROR 0x0000000000080000
-#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000
-#define IPG_RFS_RXLENGTHERROR 0x0000000000200000
-#define IPG_RFS_VLANDETECTED 0x0000000000400000
-#define IPG_RFS_TCPDETECTED 0x0000000000800000
-#define IPG_RFS_TCPERROR 0x0000000001000000
-#define IPG_RFS_UDPDETECTED 0x0000000002000000
-#define IPG_RFS_UDPERROR 0x0000000004000000
-#define IPG_RFS_IPDETECTED 0x0000000008000000
-#define IPG_RFS_IPERROR 0x0000000010000000
-#define IPG_RFS_FRAMESTART 0x0000000020000000
-#define IPG_RFS_FRAMEEND 0x0000000040000000
-#define IPG_RFS_RFDDONE 0x0000000080000000
-#define IPG_RFS_TCI 0x0000FFFF00000000
+#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFFULL
+#define IPG_RFS_RXFRAMELEN 0x000000000000FFFFULL
+#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000ULL
+#define IPG_RFS_RXRUNTFRAME 0x0000000000020000ULL
+#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000ULL
+#define IPG_RFS_RXFCSERROR 0x0000000000080000ULL
+#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000ULL
+#define IPG_RFS_RXLENGTHERROR 0x0000000000200000ULL
+#define IPG_RFS_VLANDETECTED 0x0000000000400000ULL
+#define IPG_RFS_TCPDETECTED 0x0000000000800000ULL
+#define IPG_RFS_TCPERROR 0x0000000001000000ULL
+#define IPG_RFS_UDPDETECTED 0x0000000002000000ULL
+#define IPG_RFS_UDPERROR 0x0000000004000000ULL
+#define IPG_RFS_IPDETECTED 0x0000000008000000ULL
+#define IPG_RFS_IPERROR 0x0000000010000000ULL
+#define IPG_RFS_FRAMESTART 0x0000000020000000ULL
+#define IPG_RFS_FRAMEEND 0x0000000040000000ULL
+#define IPG_RFS_RFDDONE 0x0000000080000000ULL
+#define IPG_RFS_TCI 0x0000FFFF00000000ULL
/* RFDList, FragInfo */
-#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFF
-#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFF
-#define IPG_RFI_FRAGLEN 0xFFFF000000000000LL
+#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL
+#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFFULL
+#define IPG_RFI_FRAGLEN 0xFFFF000000000000ULL
/* I/O Register masks. */
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index d0afeea..2ad1494 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -867,7 +867,7 @@
struct netdev_queue *nq = netdev_get_tx_queue(mp->dev, txq->index);
int reclaimed;
- __netif_tx_lock(nq, smp_processor_id());
+ __netif_tx_lock_bh(nq);
reclaimed = 0;
while (reclaimed < budget && txq->tx_desc_count > 0) {
@@ -913,7 +913,7 @@
dev_kfree_skb(skb);
}
- __netif_tx_unlock(nq);
+ __netif_tx_unlock_bh(nq);
if (reclaimed < budget)
mp->work_tx &= ~(1 << txq->index);
@@ -2745,7 +2745,7 @@
INIT_WORK(&mp->tx_timeout_task, tx_timeout_task);
- netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, 128);
+ netif_napi_add(dev, &mp->napi, mv643xx_eth_poll, NAPI_POLL_WEIGHT);
init_timer(&mp->rx_oom);
mp->rx_oom.data = (unsigned long)mp;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 019c5f7..c1b693c 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -907,8 +907,11 @@
#define QLCNIC_FW_HANG 0x4000
#define QLCNIC_FW_LRO_MSS_CAP 0x8000
#define QLCNIC_TX_INTR_SHARED 0x10000
+#define QLCNIC_APP_CHANGED_FLAGS 0x20000
#define QLCNIC_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
+#define QLCNIC_IS_TSO_CAPABLE(adapter) \
+ ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
#define QLCNIC_DEF_NUM_STS_DESC_RINGS 4
#define QLCNIC_MSIX_TBL_SPACE 8192
@@ -1034,6 +1037,7 @@
spinlock_t rx_mac_learn_lock;
u32 file_prd_off; /*File fw product offset*/
u32 fw_version;
+ u32 offload_flags;
const struct firmware *fw;
};
@@ -1542,6 +1546,8 @@
int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter);
int qlcnic_read_mac_addr(struct qlcnic_adapter *);
int qlcnic_setup_netdev(struct qlcnic_adapter *, struct net_device *, int);
+void qlcnic_set_netdev_features(struct qlcnic_adapter *,
+ struct qlcnic_esw_func_cfg *);
void qlcnic_sriov_vf_schedule_multi(struct net_device *);
void qlcnic_vf_add_mc_list(struct net_device *, u16);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index c67d1eb..5e7fb1d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -382,8 +382,6 @@
clear_bit(__QLCNIC_RESETTING, &adapter->state);
dev_err(&adapter->pdev->dev, "%s:\n", __func__);
- adapter->netdev->trans_start = jiffies;
-
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 6a6512b..106a12f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -973,16 +973,57 @@
return rc;
}
+static netdev_features_t qlcnic_process_flags(struct qlcnic_adapter *adapter,
+ netdev_features_t features)
+{
+ u32 offload_flags = adapter->offload_flags;
+
+ if (offload_flags & BIT_0) {
+ features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM;
+ adapter->rx_csum = 1;
+ if (QLCNIC_IS_TSO_CAPABLE(adapter)) {
+ if (!(offload_flags & BIT_1))
+ features &= ~NETIF_F_TSO;
+ else
+ features |= NETIF_F_TSO;
+
+ if (!(offload_flags & BIT_2))
+ features &= ~NETIF_F_TSO6;
+ else
+ features |= NETIF_F_TSO6;
+ }
+ } else {
+ features &= ~(NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM);
+
+ if (QLCNIC_IS_TSO_CAPABLE(adapter))
+ features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+ adapter->rx_csum = 0;
+ }
+
+ return features;
+}
netdev_features_t qlcnic_fix_features(struct net_device *netdev,
netdev_features_t features)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ netdev_features_t changed;
- if ((adapter->flags & QLCNIC_ESWITCH_ENABLED) &&
- qlcnic_82xx_check(adapter)) {
- netdev_features_t changed = features ^ netdev->features;
- features ^= changed & (NETIF_F_ALL_CSUM | NETIF_F_RXCSUM);
+ if (qlcnic_82xx_check(adapter) &&
+ (adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+ if (adapter->flags & QLCNIC_APP_CHANGED_FLAGS) {
+ features = qlcnic_process_flags(adapter, features);
+ } else {
+ changed = features ^ netdev->features;
+ features ^= changed & (NETIF_F_RXCSUM |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6);
+ }
}
if (!(features & NETIF_F_RXCSUM))
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 8fb836d..aeb26a85 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -84,14 +84,9 @@
static void qlcnic_free_lb_filters_mem(struct qlcnic_adapter *adapter);
static void qlcnic_dev_set_npar_ready(struct qlcnic_adapter *);
static int qlcnicvf_start_firmware(struct qlcnic_adapter *);
-static void qlcnic_set_netdev_features(struct qlcnic_adapter *,
- struct qlcnic_esw_func_cfg *);
static int qlcnic_vlan_rx_add(struct net_device *, __be16, u16);
static int qlcnic_vlan_rx_del(struct net_device *, __be16, u16);
-#define QLCNIC_IS_TSO_CAPABLE(adapter) \
- ((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
-
static u32 qlcnic_vlan_tx_check(struct qlcnic_adapter *adapter)
{
struct qlcnic_hardware_context *ahw = adapter->ahw;
@@ -1074,8 +1069,6 @@
if (!esw_cfg->promisc_mode)
adapter->flags |= QLCNIC_PROMISC_DISABLED;
-
- qlcnic_set_netdev_features(adapter, esw_cfg);
}
int qlcnic_set_eswitch_port_config(struct qlcnic_adapter *adapter)
@@ -1090,51 +1083,23 @@
return -EIO;
qlcnic_set_vlan_config(adapter, &esw_cfg);
qlcnic_set_eswitch_port_features(adapter, &esw_cfg);
+ qlcnic_set_netdev_features(adapter, &esw_cfg);
return 0;
}
-static void
-qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
- struct qlcnic_esw_func_cfg *esw_cfg)
+void qlcnic_set_netdev_features(struct qlcnic_adapter *adapter,
+ struct qlcnic_esw_func_cfg *esw_cfg)
{
struct net_device *netdev = adapter->netdev;
- unsigned long features, vlan_features;
if (qlcnic_83xx_check(adapter))
return;
- features = (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
- NETIF_F_IPV6_CSUM | NETIF_F_GRO);
- vlan_features = (NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM);
-
- if (QLCNIC_IS_TSO_CAPABLE(adapter)) {
- features |= (NETIF_F_TSO | NETIF_F_TSO6);
- vlan_features |= (NETIF_F_TSO | NETIF_F_TSO6);
- }
-
- if (netdev->features & NETIF_F_LRO)
- features |= NETIF_F_LRO;
-
- if (esw_cfg->offload_flags & BIT_0) {
- netdev->features |= features;
- adapter->rx_csum = 1;
- if (!(esw_cfg->offload_flags & BIT_1)) {
- netdev->features &= ~NETIF_F_TSO;
- features &= ~NETIF_F_TSO;
- }
- if (!(esw_cfg->offload_flags & BIT_2)) {
- netdev->features &= ~NETIF_F_TSO6;
- features &= ~NETIF_F_TSO6;
- }
- } else {
- netdev->features &= ~features;
- features &= ~features;
- adapter->rx_csum = 0;
- }
-
- netdev->vlan_features = (features & vlan_features);
+ adapter->offload_flags = esw_cfg->offload_flags;
+ adapter->flags |= QLCNIC_APP_CHANGED_FLAGS;
+ netdev_update_features(netdev);
+ adapter->flags &= ~QLCNIC_APP_CHANGED_FLAGS;
}
static int
@@ -2016,8 +1981,10 @@
pci_enable_pcie_error_reporting(pdev);
ahw = kzalloc(sizeof(struct qlcnic_hardware_context), GFP_KERNEL);
- if (!ahw)
+ if (!ahw) {
+ err = -ENOMEM;
goto err_out_free_res;
+ }
switch (ent->device) {
case PCI_DEVICE_ID_QLOGIC_QLE824X:
@@ -2053,6 +2020,7 @@
adapter->qlcnic_wq = create_singlethread_workqueue("qlcnic");
if (adapter->qlcnic_wq == NULL) {
+ err = -ENOMEM;
dev_err(&pdev->dev, "Failed to create workqueue\n");
goto err_out_free_netdev;
}
@@ -2133,6 +2101,10 @@
goto err_out_disable_msi;
}
+ err = qlcnic_get_act_pci_func(adapter);
+ if (err)
+ goto err_out_disable_mbx_intr;
+
err = qlcnic_setup_netdev(adapter, netdev, pci_using_dac);
if (err)
goto err_out_disable_mbx_intr;
@@ -2162,9 +2134,6 @@
break;
}
- if (qlcnic_get_act_pci_func(adapter))
- goto err_out_disable_mbx_intr;
-
if (adapter->drv_mac_learn)
qlcnic_alloc_lb_filters_mem(adapter);
@@ -3149,10 +3118,8 @@
if (adapter->need_fw_reset)
goto detach;
- if (adapter->ahw->reset_context && qlcnic_auto_fw_reset) {
+ if (adapter->ahw->reset_context && qlcnic_auto_fw_reset)
qlcnic_reset_hw_context(adapter);
- adapter->netdev->trans_start = jiffies;
- }
return 0;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 3869c38..196b2d1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -1734,7 +1734,6 @@
if (!qlcnic_sriov_vf_reinit_driver(adapter)) {
qlcnic_sriov_vf_attach(adapter);
- adapter->netdev->trans_start = jiffies;
adapter->tx_timeo_cnt = 0;
adapter->reset_ctx_cnt = 0;
adapter->fw_fail_cnt = 0;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index 4e22e79..e7a2fe2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -544,6 +544,9 @@
switch (esw_cfg[i].op_mode) {
case QLCNIC_PORT_DEFAULTS:
qlcnic_set_eswitch_port_features(adapter, &esw_cfg[i]);
+ rtnl_lock();
+ qlcnic_set_netdev_features(adapter, &esw_cfg[i]);
+ rtnl_unlock();
break;
case QLCNIC_ADD_VLAN:
qlcnic_set_vlan_config(adapter, &esw_cfg[i]);
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 7d1fb9a..0352345 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1136,6 +1136,7 @@
cp->dev->stats.tx_dropped++;
}
}
+ netdev_reset_queue(cp->dev);
memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 79c520b..393f961 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5856,7 +5856,20 @@
return -EIO;
}
-static inline void rtl8169_tso_csum(struct rtl8169_private *tp,
+static bool rtl_skb_pad(struct sk_buff *skb)
+{
+ if (skb_padto(skb, ETH_ZLEN))
+ return false;
+ skb_put(skb, ETH_ZLEN - skb->len);
+ return true;
+}
+
+static bool rtl_test_hw_pad_bug(struct rtl8169_private *tp, struct sk_buff *skb)
+{
+ return skb->len < ETH_ZLEN && tp->mac_version == RTL_GIGA_MAC_VER_34;
+}
+
+static inline bool rtl8169_tso_csum(struct rtl8169_private *tp,
struct sk_buff *skb, u32 *opts)
{
const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version;
@@ -5869,13 +5882,20 @@
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
const struct iphdr *ip = ip_hdr(skb);
+ if (unlikely(rtl_test_hw_pad_bug(tp, skb)))
+ return skb_checksum_help(skb) == 0 && rtl_skb_pad(skb);
+
if (ip->protocol == IPPROTO_TCP)
opts[offset] |= info->checksum.tcp;
else if (ip->protocol == IPPROTO_UDP)
opts[offset] |= info->checksum.udp;
else
WARN_ON_ONCE(1);
+ } else {
+ if (unlikely(rtl_test_hw_pad_bug(tp, skb)))
+ return rtl_skb_pad(skb);
}
+ return true;
}
static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
@@ -5896,17 +5916,15 @@
goto err_stop_0;
}
- /* 8168evl does not automatically pad to minimum length. */
- if (unlikely(tp->mac_version == RTL_GIGA_MAC_VER_34 &&
- skb->len < ETH_ZLEN)) {
- if (skb_padto(skb, ETH_ZLEN))
- goto err_update_stats;
- skb_put(skb, ETH_ZLEN - skb->len);
- }
-
if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
goto err_stop_0;
+ opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb));
+ opts[0] = DescOwn;
+
+ if (!rtl8169_tso_csum(tp, skb, opts))
+ goto err_update_stats;
+
len = skb_headlen(skb);
mapping = dma_map_single(d, skb->data, len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(d, mapping))) {
@@ -5918,11 +5936,6 @@
tp->tx_skb[entry].len = len;
txd->addr = cpu_to_le64(mapping);
- opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(skb));
- opts[0] = DescOwn;
-
- rtl8169_tso_csum(tp, skb, opts);
-
frags = rtl8169_xmit_frags(tp, skb, opts);
if (frags < 0)
goto err_dma_1;
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 01b9920..39e4cb3 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -638,14 +638,16 @@
EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
efx->type->rx_buffer_padding);
rx_buf_len = (sizeof(struct efx_rx_page_state) +
- EFX_PAGE_IP_ALIGN + efx->rx_dma_len);
+ NET_IP_ALIGN + efx->rx_dma_len);
if (rx_buf_len <= PAGE_SIZE) {
efx->rx_scatter = false;
efx->rx_buffer_order = 0;
} else if (efx->type->can_rx_scatter) {
+ BUILD_BUG_ON(EFX_RX_USR_BUF_SIZE % L1_CACHE_BYTES);
BUILD_BUG_ON(sizeof(struct efx_rx_page_state) +
- EFX_PAGE_IP_ALIGN + EFX_RX_USR_BUF_SIZE >
- PAGE_SIZE / 2);
+ 2 * ALIGN(NET_IP_ALIGN + EFX_RX_USR_BUF_SIZE,
+ EFX_RX_BUF_ALIGNMENT) >
+ PAGE_SIZE);
efx->rx_scatter = true;
efx->rx_dma_len = EFX_RX_USR_BUF_SIZE;
efx->rx_buffer_order = 0;
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index 9bd433a..39d6bd77 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -72,8 +72,20 @@
/* Maximum possible MTU the driver supports */
#define EFX_MAX_MTU (9 * 1024)
-/* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page. */
-#define EFX_RX_USR_BUF_SIZE 1824
+/* Size of an RX scatter buffer. Small enough to pack 2 into a 4K page,
+ * and should be a multiple of the cache line size.
+ */
+#define EFX_RX_USR_BUF_SIZE (2048 - 256)
+
+/* If possible, we should ensure cache line alignment at start and end
+ * of every buffer. Otherwise, we just need to ensure 4-byte
+ * alignment of the network header.
+ */
+#if NET_IP_ALIGN == 0
+#define EFX_RX_BUF_ALIGNMENT L1_CACHE_BYTES
+#else
+#define EFX_RX_BUF_ALIGNMENT 4
+#endif
/* Forward declare Precision Time Protocol (PTP) support structure. */
struct efx_ptp_data;
@@ -468,24 +480,11 @@
};
/*
- * Alignment of page-allocated RX buffers
- *
- * Controls the number of bytes inserted at the start of an RX buffer.
- * This is the equivalent of NET_IP_ALIGN [which controls the alignment
- * of the skb->head for hardware DMA].
- */
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-#define EFX_PAGE_IP_ALIGN 0
-#else
-#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
-#endif
-
-/*
* Alignment of the skb->head which wraps a page-allocated RX buffer
*
* The skb allocated to wrap an rx_buffer can have this alignment. Since
* the data is memcpy'd from the rx_buf, it does not need to be equal to
- * EFX_PAGE_IP_ALIGN.
+ * NET_IP_ALIGN.
*/
#define EFX_PAGE_SKB_ALIGN 2
diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c
index e73e30b..a7dfe36 100644
--- a/drivers/net/ethernet/sfc/rx.c
+++ b/drivers/net/ethernet/sfc/rx.c
@@ -93,8 +93,8 @@
void efx_rx_config_page_split(struct efx_nic *efx)
{
- efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + EFX_PAGE_IP_ALIGN,
- L1_CACHE_BYTES);
+ efx->rx_page_buf_step = ALIGN(efx->rx_dma_len + NET_IP_ALIGN,
+ EFX_RX_BUF_ALIGNMENT);
efx->rx_bufs_per_page = efx->rx_buffer_order ? 1 :
((PAGE_SIZE - sizeof(struct efx_rx_page_state)) /
efx->rx_page_buf_step);
@@ -188,9 +188,9 @@
do {
index = rx_queue->added_count & rx_queue->ptr_mask;
rx_buf = efx_rx_buffer(rx_queue, index);
- rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
+ rx_buf->dma_addr = dma_addr + NET_IP_ALIGN;
rx_buf->page = page;
- rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN;
+ rx_buf->page_offset = page_offset + NET_IP_ALIGN;
rx_buf->len = efx->rx_dma_len;
rx_buf->flags = 0;
++rx_queue->added_count;
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index cf887c2..86adfa0 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -582,6 +582,7 @@
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
+ {QMI_FIXED_INTF(0x1e2d, 0x12d1, 4)}, /* Cinterion PLxx */
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index a491d3a..6cbdac6 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -130,19 +130,23 @@
struct usb_device *udev;
struct tasklet_struct tl;
struct net_device *netdev;
- struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb;
+ struct urb *rx_urb, *tx_urb, *intr_urb;
struct sk_buff *tx_skb, *rx_skb;
struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
spinlock_t rx_pool_lock;
struct usb_ctrlrequest dr;
int intr_interval;
- __le16 rx_creg;
u8 *intr_buff;
u8 phy;
};
typedef struct rtl8150 rtl8150_t;
+struct async_req {
+ struct usb_ctrlrequest dr;
+ u16 rx_creg;
+};
+
static const char driver_name [] = "rtl8150";
/*
@@ -164,51 +168,47 @@
indx, 0, data, size, 500);
}
-static void ctrl_callback(struct urb *urb)
+static void async_set_reg_cb(struct urb *urb)
{
- rtl8150_t *dev;
+ struct async_req *req = (struct async_req *)urb->context;
int status = urb->status;
- switch (status) {
- case 0:
- break;
- case -EINPROGRESS:
- break;
- case -ENOENT:
- break;
- default:
- if (printk_ratelimit())
- dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status);
- }
- dev = urb->context;
- clear_bit(RX_REG_SET, &dev->flags);
+ if (status < 0)
+ dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
+ kfree(req);
+ usb_free_urb(urb);
}
-static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
+static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg)
{
- int ret;
+ int res = -ENOMEM;
+ struct urb *async_urb;
+ struct async_req *req;
- if (test_bit(RX_REG_SET, &dev->flags))
- return -EAGAIN;
-
- dev->dr.bRequestType = RTL8150_REQT_WRITE;
- dev->dr.bRequest = RTL8150_REQ_SET_REGS;
- dev->dr.wValue = cpu_to_le16(indx);
- dev->dr.wIndex = 0;
- dev->dr.wLength = cpu_to_le16(size);
- dev->ctrl_urb->transfer_buffer_length = size;
- usb_fill_control_urb(dev->ctrl_urb, dev->udev,
- usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
- &dev->rx_creg, size, ctrl_callback, dev);
- if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
- if (ret == -ENODEV)
+ req = kmalloc(sizeof(struct async_req), GFP_ATOMIC);
+ if (req == NULL)
+ return res;
+ async_urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (async_urb == NULL) {
+ kfree(req);
+ return res;
+ }
+ req->rx_creg = cpu_to_le16(reg);
+ req->dr.bRequestType = RTL8150_REQT_WRITE;
+ req->dr.bRequest = RTL8150_REQ_SET_REGS;
+ req->dr.wIndex = 0;
+ req->dr.wValue = cpu_to_le16(indx);
+ req->dr.wLength = cpu_to_le16(size);
+ usb_fill_control_urb(async_urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr,
+ &req->rx_creg, size, async_set_reg_cb, req);
+ res = usb_submit_urb(async_urb, GFP_ATOMIC);
+ if (res) {
+ if (res == -ENODEV)
netif_device_detach(dev->netdev);
- dev_err(&dev->udev->dev,
- "control request submission failed: %d\n", ret);
- } else
- set_bit(RX_REG_SET, &dev->flags);
-
- return ret;
+ dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res);
+ }
+ return res;
}
static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
@@ -330,13 +330,6 @@
usb_free_urb(dev->tx_urb);
return 0;
}
- dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->ctrl_urb) {
- usb_free_urb(dev->rx_urb);
- usb_free_urb(dev->tx_urb);
- usb_free_urb(dev->intr_urb);
- return 0;
- }
return 1;
}
@@ -346,7 +339,6 @@
usb_free_urb(dev->rx_urb);
usb_free_urb(dev->tx_urb);
usb_free_urb(dev->intr_urb);
- usb_free_urb(dev->ctrl_urb);
}
static void unlink_all_urbs(rtl8150_t * dev)
@@ -354,7 +346,6 @@
usb_kill_urb(dev->rx_urb);
usb_kill_urb(dev->tx_urb);
usb_kill_urb(dev->intr_urb);
- usb_kill_urb(dev->ctrl_urb);
}
static inline struct sk_buff *pull_skb(rtl8150_t *dev)
@@ -629,7 +620,6 @@
}
/* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */
rcr = 0x9e;
- dev->rx_creg = cpu_to_le16(rcr);
tcr = 0xd8;
cr = 0x0c;
if (!(rcr & 0x80))
@@ -662,20 +652,22 @@
static void rtl8150_set_multicast(struct net_device *netdev)
{
rtl8150_t *dev = netdev_priv(netdev);
+ u16 rx_creg = 0x9e;
+
netif_stop_queue(netdev);
if (netdev->flags & IFF_PROMISC) {
- dev->rx_creg |= cpu_to_le16(0x0001);
+ rx_creg |= 0x0001;
dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
} else if (!netdev_mc_empty(netdev) ||
(netdev->flags & IFF_ALLMULTI)) {
- dev->rx_creg &= cpu_to_le16(0xfffe);
- dev->rx_creg |= cpu_to_le16(0x0002);
+ rx_creg &= 0xfffe;
+ rx_creg |= 0x0002;
dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name);
} else {
/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
- dev->rx_creg &= cpu_to_le16(0x00fc);
+ rx_creg &= 0x00fc;
}
- async_set_registers(dev, RCR, 2);
+ async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
netif_wake_queue(netdev);
}
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f95cb03..06ee82f 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1477,7 +1477,7 @@
/* usbnet already took usb runtime pm, so have to enable the feature
* for usb interface, otherwise usb_autopm_get_interface may return
- * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
+ * failure if RUNTIME_PM is enabled.
*/
if (!driver->supports_autosuspend) {
driver->supports_autosuspend = 1;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 655bb25..c9e0038 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -636,10 +636,11 @@
struct virtnet_info *vi = netdev_priv(dev);
int i;
- for (i = 0; i < vi->curr_queue_pairs; i++) {
- /* Make sure we have some buffers: if oom use wq. */
- if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
- schedule_delayed_work(&vi->refill, 0);
+ for (i = 0; i < vi->max_queue_pairs; i++) {
+ if (i < vi->curr_queue_pairs)
+ /* Make sure we have some buffers: if oom use wq. */
+ if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
+ schedule_delayed_work(&vi->refill, 0);
virtnet_napi_enable(&vi->rq[i]);
}
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index ba81f3c..3b1d2ee 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -301,7 +301,7 @@
}
/* Look up Ethernet address in forwarding table */
-static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan,
+static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan,
const u8 *mac)
{
@@ -316,6 +316,18 @@
return NULL;
}
+static struct vxlan_fdb *vxlan_find_mac(struct vxlan_dev *vxlan,
+ const u8 *mac)
+{
+ struct vxlan_fdb *f;
+
+ f = __vxlan_find_mac(vxlan, mac);
+ if (f)
+ f->used = jiffies;
+
+ return f;
+}
+
/* Add/update destinations for multicast */
static int vxlan_fdb_append(struct vxlan_fdb *f,
__be32 ip, __be16 port, __u32 vni, __u32 ifindex)
@@ -353,7 +365,7 @@
struct vxlan_fdb *f;
int notify = 0;
- f = vxlan_find_mac(vxlan, mac);
+ f = __vxlan_find_mac(vxlan, mac);
if (f) {
if (flags & NLM_F_EXCL) {
netdev_dbg(vxlan->dev,
@@ -563,7 +575,6 @@
f = vxlan_find_mac(vxlan, src_mac);
if (likely(f)) {
- f->used = jiffies;
if (likely(f->remote.remote_ip == src_ip))
return;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 639ba7d..6988e1d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -965,7 +965,7 @@
{
int i;
- if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+ if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
return;
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index 712f415..88ff1d7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -1020,7 +1020,7 @@
{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 8a1888d..366002f 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -254,6 +254,7 @@
int sched;
int paused;
u8 state;
+ bool stop_cb;
};
struct ath_node {
@@ -351,7 +352,8 @@
void ath_tx_edma_tasklet(struct ath_softc *sc);
int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
u16 tid, u16 *ssn);
-void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
+bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid,
+ bool flush);
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an);
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index e6307b8..b37eb8d 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -2008,6 +2008,14 @@
WARN_ON(i != ATH9K_SSTATS_LEN);
}
+void ath9k_deinit_debug(struct ath_softc *sc)
+{
+ if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
+ relay_close(sc->rfs_chan_spec_scan);
+ sc->rfs_chan_spec_scan = NULL;
+ }
+}
+
int ath9k_init_debug(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 794a7ec..9d49aab 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -304,6 +304,7 @@
};
int ath9k_init_debug(struct ath_hw *ah);
+void ath9k_deinit_debug(struct ath_softc *sc);
void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
@@ -339,6 +340,10 @@
return 0;
}
+static inline void ath9k_deinit_debug(struct ath_softc *sc)
+{
+}
+
static inline void ath_debug_stat_interrupt(struct ath_softc *sc,
enum ath9k_int status)
{
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 0237b28..aba4151 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -906,7 +906,7 @@
if (!ath_is_world_regd(reg)) {
error = regulatory_hint(hw->wiphy, reg->alpha2);
if (error)
- goto unregister;
+ goto debug_cleanup;
}
ath_init_leds(sc);
@@ -914,6 +914,8 @@
return 0;
+debug_cleanup:
+ ath9k_deinit_debug(sc);
unregister:
ieee80211_unregister_hw(hw);
rx_cleanup:
@@ -942,11 +944,6 @@
sc->dfs_detector->exit(sc->dfs_detector);
ath9k_eeprom_release(sc);
-
- if (config_enabled(CONFIG_ATH9K_DEBUGFS) && sc->rfs_chan_spec_scan) {
- relay_close(sc->rfs_chan_spec_scan);
- sc->rfs_chan_spec_scan = NULL;
- }
}
void ath9k_deinit_device(struct ath_softc *sc)
@@ -960,6 +957,7 @@
ath9k_ps_restore(sc);
+ ath9k_deinit_debug(sc);
ieee80211_unregister_hw(hw);
ath_rx_cleanup(sc);
ath9k_deinit_softc(sc);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a18414b..2382d12 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1687,6 +1687,7 @@
u16 tid, u16 *ssn, u8 buf_size)
{
struct ath_softc *sc = hw->priv;
+ bool flush = false;
int ret = 0;
local_bh_disable();
@@ -1703,12 +1704,13 @@
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
ath9k_ps_restore(sc);
break;
- case IEEE80211_AMPDU_TX_STOP_CONT:
case IEEE80211_AMPDU_TX_STOP_FLUSH:
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+ flush = true;
+ case IEEE80211_AMPDU_TX_STOP_CONT:
ath9k_ps_wakeup(sc);
- ath_tx_aggr_stop(sc, sta, tid);
- ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ if (ath_tx_aggr_stop(sc, sta, tid, flush))
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index eab0fcb..14bb335 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -164,7 +164,20 @@
ARRAY_SIZE(bf->rates));
}
-static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
+{
+ tid->state &= ~AGGR_ADDBA_COMPLETE;
+ tid->state &= ~AGGR_CLEANUP;
+ if (!tid->stop_cb)
+ return;
+
+ ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr,
+ tid->tidno);
+ tid->stop_cb = false;
+}
+
+static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid,
+ bool flush_packets)
{
struct ath_txq *txq = tid->ac->txq;
struct sk_buff *skb;
@@ -181,16 +194,15 @@
while ((skb = __skb_dequeue(&tid->buf_q))) {
fi = get_frame_info(skb);
bf = fi->bf;
+ if (!bf && !flush_packets)
+ bf = ath_tx_setup_buffer(sc, txq, tid, skb);
if (!bf) {
- bf = ath_tx_setup_buffer(sc, txq, tid, skb);
- if (!bf) {
- ieee80211_free_txskb(sc->hw, skb);
- continue;
- }
+ ieee80211_free_txskb(sc->hw, skb);
+ continue;
}
- if (fi->retries) {
+ if (fi->retries || flush_packets) {
list_add_tail(&bf->list, &bf_head);
ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
@@ -201,12 +213,10 @@
}
}
- if (tid->baw_head == tid->baw_tail) {
- tid->state &= ~AGGR_ADDBA_COMPLETE;
- tid->state &= ~AGGR_CLEANUP;
- }
+ if (tid->baw_head == tid->baw_tail)
+ ath_tx_clear_tid(sc, tid);
- if (sendbar) {
+ if (sendbar && !flush_packets) {
ath_txq_unlock(sc, txq);
ath_send_bar(tid, tid->seq_start);
ath_txq_lock(sc, txq);
@@ -277,9 +287,7 @@
list_add_tail(&bf->list, &bf_head);
- if (fi->retries)
- ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
-
+ ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
}
@@ -602,7 +610,7 @@
}
if (tid->state & AGGR_CLEANUP)
- ath_tx_flush_tid(sc, tid);
+ ath_tx_flush_tid(sc, tid, false);
rcu_read_unlock();
@@ -620,6 +628,7 @@
struct ath_tx_status *ts, struct ath_buf *bf,
struct list_head *bf_head)
{
+ struct ieee80211_tx_info *info;
bool txok, flush;
txok = !(ts->ts_status & ATH9K_TXERR_MASK);
@@ -631,8 +640,12 @@
txq->axq_ampdu_depth--;
if (!bf_isampdu(bf)) {
- if (!flush)
+ if (!flush) {
+ info = IEEE80211_SKB_CB(bf->bf_mpdu);
+ memcpy(info->control.rates, bf->rates,
+ sizeof(info->control.rates));
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
+ }
ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
} else
ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok);
@@ -676,7 +689,7 @@
skb = bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
- rates = tx_info->control.rates;
+ rates = bf->rates;
/*
* Find the lowest frame length among the rate series that will have a
@@ -1256,18 +1269,23 @@
return 0;
}
-void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
+bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid,
+ bool flush)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
struct ath_txq *txq = txtid->ac->txq;
+ bool ret = !flush;
+
+ if (flush)
+ txtid->stop_cb = false;
if (txtid->state & AGGR_CLEANUP)
- return;
+ return false;
if (!(txtid->state & AGGR_ADDBA_COMPLETE)) {
txtid->state &= ~AGGR_ADDBA_PROGRESS;
- return;
+ return ret;
}
ath_txq_lock(sc, txq);
@@ -1279,13 +1297,17 @@
* TID can only be reused after all in-progress subframes have been
* completed.
*/
- if (txtid->baw_head != txtid->baw_tail)
+ if (txtid->baw_head != txtid->baw_tail) {
txtid->state |= AGGR_CLEANUP;
- else
+ ret = false;
+ txtid->stop_cb = !flush;
+ } else {
txtid->state &= ~AGGR_ADDBA_COMPLETE;
+ }
- ath_tx_flush_tid(sc, txtid);
+ ath_tx_flush_tid(sc, txtid, flush);
ath_txq_unlock_complete(sc, txq);
+ return ret;
}
void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc,
@@ -2415,6 +2437,7 @@
tid->ac = &an->ac[acno];
tid->state &= ~AGGR_ADDBA_COMPLETE;
tid->state &= ~AGGR_ADDBA_PROGRESS;
+ tid->stop_cb = false;
}
for (acno = 0, ac = &an->ac[acno];
@@ -2451,8 +2474,7 @@
}
ath_tid_drain(sc, txq, tid);
- tid->state &= ~AGGR_ADDBA_COMPLETE;
- tid->state &= ~AGGR_CLEANUP;
+ ath_tx_clear_tid(sc, tid);
ath_txq_unlock(sc, txq);
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 6d758f2..761f501 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4140,6 +4140,10 @@
.types = BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO)
},
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE)
+ }
};
static const struct ieee80211_iface_combination brcmf_iface_combos[] = {
{
@@ -4197,7 +4201,8 @@
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
- BIT(NL80211_IFTYPE_P2P_GO);
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_DEVICE);
wiphy->iface_combinations = brcmf_iface_combos;
wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos);
wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 592d0aa..e9a3cbc 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -1423,7 +1423,7 @@
}
EXPORT_SYMBOL(il_setup_rx_scan_handlers);
-inline u16
+u16
il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band,
u8 n_probes)
{
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 191dcae..c638455 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -173,6 +173,8 @@
REPLY_DEBUG_CMD = 0xf0,
DEBUG_LOG_MSG = 0xf7,
+ MCAST_FILTER_CMD = 0xd0,
+
/* D3 commands/notifications */
D3_CONFIG_CMD = 0xd3,
PROT_OFFLOAD_CONFIG_CMD = 0xd4,
@@ -948,4 +950,29 @@
u8 data[0];
} __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
+#define MAX_PORT_ID_NUM 2
+
+/**
+ * struct iwl_mcast_filter_cmd - configure multicast filter.
+ * @filter_own: Set 1 to filter out multicast packets sent by station itself
+ * @port_id: Multicast MAC addresses array specifier. This is a strange way
+ * to identify network interface adopted in host-device IF.
+ * It is used by FW as index in array of addresses. This array has
+ * MAX_PORT_ID_NUM members.
+ * @count: Number of MAC addresses in the array
+ * @pass_all: Set 1 to pass all multicast packets.
+ * @bssid: current association BSSID.
+ * @addr_list: Place holder for array of MAC addresses.
+ * IMPORTANT: add padding if necessary to ensure DWORD alignment.
+ */
+struct iwl_mcast_filter_cmd {
+ u8 filter_own;
+ u8 port_id;
+ u8 count;
+ u8 pass_all;
+ u8 bssid[6];
+ u8 reserved[2];
+ u8 addr_list[0];
+} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
+
#endif /* __fw_api_h__ */
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index e6eca4d..b2cc3d9 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -586,10 +586,12 @@
*/
static void iwl_mvm_mac_ctxt_cmd_fill_sta(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
- struct iwl_mac_data_sta *ctxt_sta)
+ struct iwl_mac_data_sta *ctxt_sta,
+ bool force_assoc_off)
{
/* We need the dtim_period to set the MAC as associated */
- if (vif->bss_conf.assoc && vif->bss_conf.dtim_period) {
+ if (vif->bss_conf.assoc && vif->bss_conf.dtim_period &&
+ !force_assoc_off) {
u32 dtim_offs;
/*
@@ -659,7 +661,8 @@
cmd.filter_flags &= ~cpu_to_le32(MAC_FILTER_IN_BEACON);
/* Fill the data specific for station mode */
- iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta);
+ iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.sta,
+ action == FW_CTXT_ACTION_ADD);
return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd);
}
@@ -677,7 +680,8 @@
iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action);
/* Fill the data specific for station mode */
- iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta);
+ iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta,
+ action == FW_CTXT_ACTION_ADD);
cmd.p2p_sta.ctwin = cpu_to_le32(noa->oppps_ctwindow &
IEEE80211_P2P_OPPPS_CTWINDOW_MASK);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index dd158ec..a5eb8c8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -701,6 +701,20 @@
*total_flags = 0;
}
+static int iwl_mvm_configure_mcast_filter(struct iwl_mvm *mvm,
+ struct ieee80211_vif *vif)
+{
+ struct iwl_mcast_filter_cmd mcast_filter_cmd = {
+ .pass_all = 1,
+ };
+
+ memcpy(mcast_filter_cmd.bssid, vif->bss_conf.bssid, ETH_ALEN);
+
+ return iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC,
+ sizeof(mcast_filter_cmd),
+ &mcast_filter_cmd);
+}
+
static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
@@ -722,6 +736,7 @@
return;
}
iwl_mvm_bt_coex_vif_assoc(mvm, vif);
+ iwl_mvm_configure_mcast_filter(mvm, vif);
} else if (mvmvif->ap_sta_id != IWL_MVM_STATION_COUNT) {
/* remove AP station now that the MAC is unassoc */
ret = iwl_mvm_rm_sta_id(mvm, vif, mvmvif->ap_sta_id);
@@ -931,7 +946,7 @@
switch (cmd) {
case STA_NOTIFY_SLEEP:
- if (atomic_read(&mvmsta->pending_frames) > 0)
+ if (atomic_read(&mvm->pending_frames[mvmsta->sta_id]) > 0)
ieee80211_sta_block_awake(hw, sta, true);
/*
* The fw updates the STA to be asleep. Tx packets on the Tx
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 8269bc5..9f46b23 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -292,6 +292,7 @@
struct ieee80211_sta __rcu *fw_id_to_mac_id[IWL_MVM_STATION_COUNT];
struct work_struct sta_drained_wk;
unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)];
+ atomic_t pending_frames[IWL_MVM_STATION_COUNT];
/* configured by mac80211 */
u32 rts_threshold;
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index fe031d3..b29c31a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -292,6 +292,7 @@
CMD(BT_COEX_PROT_ENV),
CMD(BT_PROFILE_NOTIFICATION),
CMD(BT_CONFIG),
+ CMD(MCAST_FILTER_CMD),
};
#undef CMD
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 2157b0f..2476e43 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -298,6 +298,12 @@
else
cmd->type = cpu_to_le32(SCAN_TYPE_FORCED);
+ /*
+ * TODO: This is a WA due to a bug in the FW AUX framework that does not
+ * properly handle time events that fail to be scheduled
+ */
+ cmd->type = cpu_to_le32(SCAN_TYPE_FORCED);
+
cmd->repeats = cpu_to_le32(1);
/*
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 0fd96e4..5c664ed 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -219,7 +219,7 @@
mvm_sta->max_agg_bufsize = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
/* HW restart, don't assume the memory has been zeroed */
- atomic_set(&mvm_sta->pending_frames, 0);
+ atomic_set(&mvm->pending_frames[sta_id], 0);
mvm_sta->tid_disable_agg = 0;
mvm_sta->tfd_queue_msk = 0;
for (i = 0; i < IEEE80211_NUM_ACS; i++)
@@ -407,14 +407,21 @@
}
/*
+ * Make sure that the tx response code sees the station as -EBUSY and
+ * calls the drain worker.
+ */
+ spin_lock_bh(&mvm_sta->lock);
+ /*
* There are frames pending on the AC queues for this station.
* We need to wait until all the frames are drained...
*/
- if (atomic_read(&mvm_sta->pending_frames)) {
- ret = iwl_mvm_drain_sta(mvm, mvm_sta, true);
+ if (atomic_read(&mvm->pending_frames[mvm_sta->sta_id])) {
rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id],
ERR_PTR(-EBUSY));
+ spin_unlock_bh(&mvm_sta->lock);
+ ret = iwl_mvm_drain_sta(mvm, mvm_sta, true);
} else {
+ spin_unlock_bh(&mvm_sta->lock);
ret = iwl_mvm_rm_sta_common(mvm, mvm_sta->sta_id);
rcu_assign_pointer(mvm->fw_id_to_mac_id[mvm_sta->sta_id], NULL);
}
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.h b/drivers/net/wireless/iwlwifi/mvm/sta.h
index 12abd2d..a4ddce7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.h
@@ -274,7 +274,6 @@
* @bt_reduced_txpower: is reduced tx power enabled for this station
* @lock: lock to protect the whole struct. Since %tid_data is access from Tx
* and from Tx response flow, it needs a spinlock.
- * @pending_frames: number of frames for this STA on the shared Tx queues.
* @tid_data: per tid data. Look at %iwl_mvm_tid_data.
*
* When mac80211 creates a station it reserves some space (hw->sta_data_size)
@@ -290,7 +289,6 @@
u8 max_agg_bufsize;
bool bt_reduced_txpower;
spinlock_t lock;
- atomic_t pending_frames;
struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT];
struct iwl_lq_sta lq_sta;
struct ieee80211_vif *vif;
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 4790743..f212f16 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -416,9 +416,8 @@
spin_unlock(&mvmsta->lock);
- if (mvmsta->vif->type == NL80211_IFTYPE_AP &&
- txq_id < IWL_MVM_FIRST_AGG_QUEUE)
- atomic_inc(&mvmsta->pending_frames);
+ if (txq_id < IWL_MVM_FIRST_AGG_QUEUE)
+ atomic_inc(&mvm->pending_frames[mvmsta->sta_id]);
return 0;
@@ -680,16 +679,41 @@
/*
* If the txq is not an AMPDU queue, there is no chance we freed
* several skbs. Check that out...
- * If there are no pending frames for this STA, notify mac80211 that
- * this station can go to sleep in its STA table.
*/
- if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && mvmsta &&
- !WARN_ON(skb_freed > 1) &&
- mvmsta->vif->type == NL80211_IFTYPE_AP &&
- atomic_sub_and_test(skb_freed, &mvmsta->pending_frames)) {
- ieee80211_sta_block_awake(mvm->hw, sta, false);
- set_bit(sta_id, mvm->sta_drained);
- schedule_work(&mvm->sta_drained_wk);
+ if (txq_id < IWL_MVM_FIRST_AGG_QUEUE && !WARN_ON(skb_freed > 1) &&
+ atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) {
+ if (mvmsta) {
+ /*
+ * If there are no pending frames for this STA, notify
+ * mac80211 that this station can go to sleep in its
+ * STA table.
+ */
+ if (mvmsta->vif->type == NL80211_IFTYPE_AP)
+ ieee80211_sta_block_awake(mvm->hw, sta, false);
+ /*
+ * We might very well have taken mvmsta pointer while
+ * the station was being removed. The remove flow might
+ * have seen a pending_frame (because we didn't take
+ * the lock) even if now the queues are drained. So make
+ * really sure now that this the station is not being
+ * removed. If it is, run the drain worker to remove it.
+ */
+ spin_lock_bh(&mvmsta->lock);
+ sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
+ if (IS_ERR_OR_NULL(sta)) {
+ /*
+ * Station disappeared in the meantime:
+ * so we are draining.
+ */
+ set_bit(sta_id, mvm->sta_drained);
+ schedule_work(&mvm->sta_drained_wk);
+ }
+ spin_unlock_bh(&mvmsta->lock);
+ } else if (!mvmsta) {
+ /* Tx response without STA, so we are draining */
+ set_bit(sta_id, mvm->sta_drained);
+ schedule_work(&mvm->sta_drained_wk);
+ }
}
rcu_read_unlock();
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index b878a32..cb34c78 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1723,11 +1723,11 @@
class_destroy(hwsim_class);
}
-
-static struct device_driver mac80211_hwsim_driver = {
- .name = "mac80211_hwsim",
- .bus = &platform_bus_type,
- .owner = THIS_MODULE,
+static struct platform_driver mac80211_hwsim_driver = {
+ .driver = {
+ .name = "mac80211_hwsim",
+ .owner = THIS_MODULE,
+ },
};
static const struct net_device_ops hwsim_netdev_ops = {
@@ -2219,7 +2219,7 @@
spin_lock_init(&hwsim_radio_lock);
INIT_LIST_HEAD(&hwsim_radios);
- err = driver_register(&mac80211_hwsim_driver);
+ err = platform_driver_register(&mac80211_hwsim_driver);
if (err)
return err;
@@ -2254,7 +2254,7 @@
err = -ENOMEM;
goto failed_drvdata;
}
- data->dev->driver = &mac80211_hwsim_driver;
+ data->dev->driver = &mac80211_hwsim_driver.driver;
err = device_bind_driver(data->dev);
if (err != 0) {
printk(KERN_DEBUG
@@ -2564,7 +2564,7 @@
failed:
mac80211_hwsim_free();
failed_unregister_driver:
- driver_unregister(&mac80211_hwsim_driver);
+ platform_driver_unregister(&mac80211_hwsim_driver);
return err;
}
module_init(init_mac80211_hwsim);
@@ -2577,6 +2577,6 @@
mac80211_hwsim_free();
unregister_netdev(hwsim_mon);
- driver_unregister(&mac80211_hwsim_driver);
+ platform_driver_unregister(&mac80211_hwsim_driver);
}
module_exit(exit_mac80211_hwsim);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
index d3a02e7..21ca33a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.h
@@ -550,7 +550,7 @@
rxmcs == DESC92C_RATE11M)
struct phy_rx_agc_info_t {
- #if __LITTLE_ENDIAN
+ #ifdef __LITTLE_ENDIAN
u8 gain:7, trsw:1;
#else
u8 trsw:1, gain:7;
@@ -574,7 +574,7 @@
u8 stream_target_csi[2];
u8 sig_evm;
u8 rsvd_3;
-#if __LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
u8 antsel_rx_keep_2:1; /*ex_intf_flg:1;*/
u8 sgi_en:1;
u8 rxsc:2;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 23d640a..938b1e6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -349,6 +349,7 @@
{RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
+ {RTL_USB_DEVICE(0x0846, 0xf001, rtl92cu_hal_cfg)}, /*On Netwrks N300MA*/
{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
{RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 96fed19..716aa93 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -950,6 +950,20 @@
return AE_OK ;
}
+void acpiphp_check_host_bridge(acpi_handle handle)
+{
+ struct acpiphp_bridge *bridge;
+
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge) {
+ acpiphp_check_bridge(bridge);
+ put_bridge(bridge);
+ }
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+ ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL);
+}
+
static void _handle_hotplug_event_bridge(struct work_struct *work)
{
struct acpiphp_bridge *bridge;
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 6194d35..5ab0564 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -47,4 +47,24 @@
If you are unsure about this, say N here.
+choice
+ prompt "Enumeration method"
+ depends on RAPIDIO
+ default RAPIDIO_ENUM_BASIC
+ help
+ There are different enumeration and discovery mechanisms offered
+ for RapidIO subsystem. You may select single built-in method or
+ or any number of methods to be built as modules.
+ Selecting a built-in method disables use of loadable methods.
+
+ If unsure, select Basic built-in.
+
+config RAPIDIO_ENUM_BASIC
+ tristate "Basic"
+ help
+ This option includes basic RapidIO fabric enumeration and discovery
+ mechanism similar to one described in RapidIO specification Annex 1.
+
+endchoice
+
source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index ec3fb81..3036702 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -1,7 +1,8 @@
#
# Makefile for RapidIO interconnect services
#
-obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
+obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o
+obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o
obj-$(CONFIG_RAPIDIO) += switches/
obj-$(CONFIG_RAPIDIO) += devices/
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 6faba40..a8b2c23 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -471,6 +471,10 @@
u32 intval;
u32 ch_inte;
+ /* For MSI mode disable all device-level interrupts */
+ if (priv->flags & TSI721_USING_MSI)
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
dev_int = ioread32(priv->regs + TSI721_DEV_INT);
if (!dev_int)
return IRQ_NONE;
@@ -560,6 +564,14 @@
}
}
#endif
+
+ /* For MSI mode re-enable device-level interrupts */
+ if (priv->flags & TSI721_USING_MSI) {
+ dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+ iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
+ }
+
return IRQ_HANDLED;
}
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 0f4a53b..a0c8755 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -164,6 +164,13 @@
driver_unregister(&rdrv->driver);
}
+void rio_attach_device(struct rio_dev *rdev)
+{
+ rdev->dev.bus = &rio_bus_type;
+ rdev->dev.parent = &rio_bus;
+}
+EXPORT_SYMBOL_GPL(rio_attach_device);
+
/**
* rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
* @dev: the standard device structure to match against
@@ -200,6 +207,7 @@
.name = "rapidio",
.match = rio_match_bus,
.dev_attrs = rio_dev_attrs,
+ .bus_attrs = rio_bus_attrs,
.probe = rio_device_probe,
.remove = rio_device_remove,
};
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a965acd..4c15dbf 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -37,12 +37,8 @@
#include "rio.h"
-LIST_HEAD(rio_devices);
-
static void rio_init_em(struct rio_dev *rdev);
-DEFINE_SPINLOCK(rio_global_list_lock);
-
static int next_destid = 0;
static int next_comptag = 1;
@@ -327,127 +323,6 @@
}
/**
- * rio_switch_init - Sets switch operations for a particular vendor switch
- * @rdev: RIO device
- * @do_enum: Enumeration/Discovery mode flag
- *
- * Searches the RIO switch ops table for known switch types. If the vid
- * and did match a switch table entry, then call switch initialization
- * routine to setup switch-specific routines.
- */
-static void rio_switch_init(struct rio_dev *rdev, int do_enum)
-{
- struct rio_switch_ops *cur = __start_rio_switch_ops;
- struct rio_switch_ops *end = __end_rio_switch_ops;
-
- while (cur < end) {
- if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
- pr_debug("RIO: calling init routine for %s\n",
- rio_name(rdev));
- cur->init_hook(rdev, do_enum);
- break;
- }
- cur++;
- }
-
- if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
- pr_debug("RIO: adding STD routing ops for %s\n",
- rio_name(rdev));
- rdev->rswitch->add_entry = rio_std_route_add_entry;
- rdev->rswitch->get_entry = rio_std_route_get_entry;
- rdev->rswitch->clr_table = rio_std_route_clr_table;
- }
-
- if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
- printk(KERN_ERR "RIO: missing routing ops for %s\n",
- rio_name(rdev));
-}
-
-/**
- * rio_add_device- Adds a RIO device to the device model
- * @rdev: RIO device
- *
- * Adds the RIO device to the global device list and adds the RIO
- * device to the RIO device list. Creates the generic sysfs nodes
- * for an RIO device.
- */
-static int rio_add_device(struct rio_dev *rdev)
-{
- int err;
-
- err = device_add(&rdev->dev);
- if (err)
- return err;
-
- spin_lock(&rio_global_list_lock);
- list_add_tail(&rdev->global_list, &rio_devices);
- spin_unlock(&rio_global_list_lock);
-
- rio_create_sysfs_dev_files(rdev);
-
- return 0;
-}
-
-/**
- * rio_enable_rx_tx_port - enable input receiver and output transmitter of
- * given port
- * @port: Master port associated with the RIO network
- * @local: local=1 select local port otherwise a far device is reached
- * @destid: Destination ID of the device to check host bit
- * @hopcount: Number of hops to reach the target
- * @port_num: Port (-number on switch) to enable on a far end device
- *
- * Returns 0 or 1 from on General Control Command and Status Register
- * (EXT_PTR+0x3C)
- */
-inline int rio_enable_rx_tx_port(struct rio_mport *port,
- int local, u16 destid,
- u8 hopcount, u8 port_num) {
-#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
- u32 regval;
- u32 ext_ftr_ptr;
-
- /*
- * enable rx input tx output port
- */
- pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
- "%d, port_num = %d)\n", local, destid, hopcount, port_num);
-
- ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
-
- if (local) {
- rio_local_read_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0),
- ®val);
- } else {
- if (rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0)
- return -EIO;
- }
-
- if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
- /* serial */
- regval = regval | RIO_PORT_N_CTL_EN_RX_SER
- | RIO_PORT_N_CTL_EN_TX_SER;
- } else {
- /* parallel */
- regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
- | RIO_PORT_N_CTL_EN_TX_PAR;
- }
-
- if (local) {
- rio_local_write_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0), regval);
- } else {
- if (rio_mport_write_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
- return -EIO;
- }
-#endif
- return 0;
-}
-
-/**
* rio_setup_device- Allocates and sets up a RIO device
* @net: RIO network
* @port: Master port to send transactions
@@ -587,8 +462,7 @@
rdev->destid);
}
- rdev->dev.bus = &rio_bus_type;
- rdev->dev.parent = &rio_bus;
+ rio_attach_device(rdev);
device_initialize(&rdev->dev);
rdev->dev.release = rio_release_dev;
@@ -1260,19 +1134,30 @@
/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
+ * @flags: Enumeration control flags
*
* Starts the enumeration process. If somebody has enumerated our
* master port device, then give up. If not and we have an active
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int rio_enum_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
int rc = 0;
printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
mport->name);
+
+ /*
+ * To avoid multiple start requests (repeat enumeration is not supported
+ * by this method) check if enumeration/discovery was performed for this
+ * mport: if mport was added into the list of mports for a net exit
+ * with error.
+ */
+ if (mport->nnode.next || mport->nnode.prev)
+ return -EBUSY;
+
/* If somebody else enumerated our master port device, bail. */
if (rio_enum_host(mport) < 0) {
printk(KERN_INFO
@@ -1362,14 +1247,16 @@
/**
* rio_disc_mport- Start discovery through a master port
* @mport: Master port to send transactions
+ * @flags: discovery control flags
*
* Starts the discovery process. If we have an active link,
- * then wait for the signal that enumeration is complete.
+ * then wait for the signal that enumeration is complete (if wait
+ * is allowed).
* When enumeration completion is signaled, start recursive
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int rio_disc_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
unsigned long to_end;
@@ -1379,6 +1266,11 @@
/* If master port has an active link, allocate net and discover peers */
if (rio_mport_is_active(mport)) {
+ if (rio_enum_complete(mport))
+ goto enum_done;
+ else if (flags & RIO_SCAN_ENUM_NO_WAIT)
+ return -EAGAIN;
+
pr_debug("RIO: wait for enumeration to complete...\n");
to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
@@ -1421,3 +1313,41 @@
bail:
return -EBUSY;
}
+
+static struct rio_scan rio_scan_ops = {
+ .enumerate = rio_enum_mport,
+ .discover = rio_disc_mport,
+};
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+ "(default = 0)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+static int __init rio_basic_attach(void)
+{
+ if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+ return -EIO;
+ if (scan)
+ rio_init_mports();
+ return 0;
+}
+
+late_initcall(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 4dbe360..66d4acd 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -285,3 +285,48 @@
rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE);
}
}
+
+static ssize_t bus_scan_store(struct bus_type *bus, const char *buf,
+ size_t count)
+{
+ long val;
+ struct rio_mport *port = NULL;
+ int rc;
+
+ if (kstrtol(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val == RIO_MPORT_ANY) {
+ rc = rio_init_mports();
+ goto exit;
+ }
+
+ if (val < 0 || val >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ port = rio_find_mport((int)val);
+
+ if (!port) {
+ pr_debug("RIO: %s: mport_%d not available\n",
+ __func__, (int)val);
+ return -EINVAL;
+ }
+
+ if (!port->nscan)
+ return -EINVAL;
+
+ if (port->host_deviceid >= 0)
+ rc = port->nscan->enumerate(port, 0);
+ else
+ rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT);
+exit:
+ if (!rc)
+ rc = count;
+
+ return rc;
+}
+
+struct bus_attribute rio_bus_attrs[] = {
+ __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store),
+ __ATTR_NULL
+};
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index d553b5d..cb1c089 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -31,7 +31,11 @@
#include "rio.h"
+static LIST_HEAD(rio_devices);
+static DEFINE_SPINLOCK(rio_global_list_lock);
+
static LIST_HEAD(rio_mports);
+static DEFINE_MUTEX(rio_mport_list_lock);
static unsigned char next_portid;
static DEFINE_SPINLOCK(rio_mmap_lock);
@@ -53,6 +57,32 @@
}
/**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list. Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+ int err;
+
+ err = device_add(&rdev->dev);
+ if (err)
+ return err;
+
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&rdev->global_list, &rio_devices);
+ spin_unlock(&rio_global_list_lock);
+
+ rio_create_sysfs_dev_files(rdev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/**
* rio_request_inb_mbox - request inbound mailbox service
* @mport: RIO master port from which to allocate the mailbox resource
* @dev_id: Device specific pointer to pass on event
@@ -489,6 +519,7 @@
return ext_ftr_ptr;
}
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
/**
* rio_get_comptag - Begin or continue searching for a RIO device by component tag
@@ -521,6 +552,7 @@
spin_unlock(&rio_global_list_lock);
return rdev;
}
+EXPORT_SYMBOL_GPL(rio_get_comptag);
/**
* rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
@@ -545,6 +577,107 @@
regval);
return 0;
}
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_switch_init - Sets switch operations for a particular vendor switch
+ * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
+ */
+void rio_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ struct rio_switch_ops *cur = __start_rio_switch_ops;
+ struct rio_switch_ops *end = __end_rio_switch_ops;
+
+ while (cur < end) {
+ if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+ pr_debug("RIO: calling init routine for %s\n",
+ rio_name(rdev));
+ cur->init_hook(rdev, do_enum);
+ break;
+ }
+ cur++;
+ }
+
+ if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+ pr_debug("RIO: adding STD routing ops for %s\n",
+ rio_name(rdev));
+ rdev->rswitch->add_entry = rio_std_route_add_entry;
+ rdev->rswitch->get_entry = rio_std_route_get_entry;
+ rdev->rswitch->clr_table = rio_std_route_clr_table;
+ }
+
+ if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
+ printk(KERN_ERR "RIO: missing routing ops for %s\n",
+ rio_name(rdev));
+}
+EXPORT_SYMBOL_GPL(rio_switch_init);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+ int local, u16 destid,
+ u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+ u32 regval;
+ u32 ext_ftr_ptr;
+
+ /*
+ * enable rx input tx output port
+ */
+ pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+ "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+ if (local) {
+ rio_local_read_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0),
+ ®val);
+ } else {
+ if (rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0)
+ return -EIO;
+ }
+
+ if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+ /* serial */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+ | RIO_PORT_N_CTL_EN_TX_SER;
+ } else {
+ /* parallel */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+ | RIO_PORT_N_CTL_EN_TX_PAR;
+ }
+
+ if (local) {
+ rio_local_write_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0), regval);
+ } else {
+ if (rio_mport_write_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+ return -EIO;
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
/**
* rio_chk_dev_route - Validate route to the specified device.
@@ -610,6 +743,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
/**
* rio_chk_dev_access - Validate access to the specified device.
@@ -941,6 +1075,7 @@
return RIO_GET_BLOCK_ID(reg_val);
}
}
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
/**
* rio_mport_get_feature - query for devices' extended features
@@ -997,6 +1132,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
/**
* rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
@@ -1246,6 +1382,95 @@
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+/**
+ * rio_find_mport - find RIO mport by its ID
+ * @mport_id: number (ID) of mport device
+ *
+ * Given a RIO mport number, the desired mport is located
+ * in the global list of mports. If the mport is found, a pointer to its
+ * data structure is returned. If no mport is found, %NULL is returned.
+ */
+struct rio_mport *rio_find_mport(int mport_id)
+{
+ struct rio_mport *port;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id)
+ goto found;
+ }
+ port = NULL;
+found:
+ mutex_unlock(&rio_mport_list_lock);
+
+ return port;
+}
+
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ * (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery control structure
+ *
+ * Assigns enumeration or discovery method to the specified mport device (or all
+ * available mports if RIO_MPORT_ANY is specified).
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns
+ * an error if was unable to find at least one available mport.
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+ struct rio_mport *port;
+ int rc = -EBUSY;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+ if (port->nscan && mport_id == RIO_MPORT_ANY)
+ continue;
+ else if (port->nscan)
+ break;
+
+ port->nscan = scan_ops;
+ rc = 0;
+
+ if (mport_id != RIO_MPORT_ANY)
+ break;
+ }
+ }
+ mutex_unlock(&rio_mport_list_lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ * unregistered (RIO_MPORT_ANY = set for all available mports)
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device (or all available mports if RIO_MPORT_ANY is specified).
+ */
+int rio_unregister_scan(int mport_id)
+{
+ struct rio_mport *port;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+ if (port->nscan)
+ port->nscan = NULL;
+ if (mport_id != RIO_MPORT_ANY)
+ break;
+ }
+ }
+ mutex_unlock(&rio_mport_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
@@ -1274,7 +1499,7 @@
work = container_of(_work, struct rio_disc_work, work);
pr_debug("RIO: discovery work for mport %d %s\n",
work->mport->id, work->mport->name);
- rio_disc_mport(work->mport);
+ work->mport->nscan->discover(work->mport, 0);
}
int rio_init_mports(void)
@@ -1290,12 +1515,15 @@
* First, run enumerations and check if we need to perform discovery
* on any of the registered mports.
*/
+ mutex_lock(&rio_mport_list_lock);
list_for_each_entry(port, &rio_mports, node) {
- if (port->host_deviceid >= 0)
- rio_enum_mport(port);
- else
+ if (port->host_deviceid >= 0) {
+ if (port->nscan)
+ port->nscan->enumerate(port, 0);
+ } else
n++;
}
+ mutex_unlock(&rio_mport_list_lock);
if (!n)
goto no_disc;
@@ -1322,14 +1550,16 @@
}
n = 0;
+ mutex_lock(&rio_mport_list_lock);
list_for_each_entry(port, &rio_mports, node) {
- if (port->host_deviceid < 0) {
+ if (port->host_deviceid < 0 && port->nscan) {
work[n].mport = port;
INIT_WORK(&work[n].work, disc_work_handler);
queue_work(rio_wq, &work[n].work);
n++;
}
}
+ mutex_unlock(&rio_mport_list_lock);
flush_workqueue(rio_wq);
pr_debug("RIO: destroy discovery workqueue\n");
@@ -1342,8 +1572,6 @@
return 0;
}
-device_initcall_sync(rio_init_mports);
-
static int hdids[RIO_MAX_MPORTS + 1];
static int rio_get_hdid(int index)
@@ -1371,7 +1599,10 @@
port->id = next_portid++;
port->host_deviceid = rio_get_hdid(port->id);
+ port->nscan = NULL;
+ mutex_lock(&rio_mport_list_lock);
list_add_tail(&port->node, &rio_mports);
+ mutex_unlock(&rio_mport_list_lock);
return 0;
}
@@ -1386,3 +1617,4 @@
EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_init_mports);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index b1af414..c14f864 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -15,6 +15,7 @@
#include <linux/rio.h>
#define RIO_MAX_CHK_RETRY 3
+#define RIO_MPORT_ANY (-1)
/* Functions internal to the RIO core code */
@@ -27,8 +28,6 @@
extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
u8 hopcount);
extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
-extern int rio_enum_mport(struct rio_mport *mport);
-extern int rio_disc_mport(struct rio_mport *mport);
extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
u8 hopcount, u16 table, u16 route_destid,
u8 route_port);
@@ -39,10 +38,18 @@
u8 hopcount, u16 table);
extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
+extern int rio_add_device(struct rio_dev *rdev);
+extern void rio_switch_init(struct rio_dev *rdev, int do_enum);
+extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u8 port_num);
+extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
+extern int rio_unregister_scan(int mport_id);
+extern void rio_attach_device(struct rio_dev *rdev);
+extern struct rio_mport *rio_find_mport(int mport_id);
/* Structures internal to the RIO core code */
extern struct device_attribute rio_dev_attrs[];
-extern spinlock_t rio_global_list_lock;
+extern struct bus_attribute rio_bus_attrs[];
extern struct rio_switch_ops __start_rio_switch_ops[];
extern struct rio_switch_ops __end_rio_switch_ops[];
diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c
index 48b6612..d5af7ba 100644
--- a/drivers/rtc/rtc-max8998.c
+++ b/drivers/rtc/rtc-max8998.c
@@ -285,7 +285,7 @@
info->irq, ret);
dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name);
- if (pdata->rtc_delay) {
+ if (pdata && pdata->rtc_delay) {
info->lp3974_bug_workaround = true;
dev_warn(&pdev->dev, "LP3974 with RTC REGERR option."
" RTC updates will be extremely slow.\n");
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 8900ea7..0f0609b 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -306,7 +306,7 @@
struct pl031_local *ldata = dev_get_drvdata(&adev->dev);
amba_set_drvdata(adev, NULL);
- free_irq(adev->irq[0], ldata->rtc);
+ free_irq(adev->irq[0], ldata);
rtc_device_unregister(ldata->rtc);
iounmap(ldata->base);
kfree(ldata);
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
index 690c333..464dd29 100644
--- a/drivers/s390/block/xpram.c
+++ b/drivers/s390/block/xpram.c
@@ -343,6 +343,7 @@
put_disk(xpram_disks[i]);
goto out;
}
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, xpram_queues[i]);
blk_queue_make_request(xpram_queues[i], xpram_make_request);
blk_queue_logical_block_size(xpram_queues[i], 4096);
}
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 21fabc6..6c440d4 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -352,12 +352,48 @@
static DEVICE_ATTR(shared, 0444, chp_shared_show, NULL);
+static ssize_t chp_chid_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct channel_path *chp = to_channelpath(dev);
+ ssize_t rc;
+
+ mutex_lock(&chp->lock);
+ if (chp->desc_fmt1.flags & 0x10)
+ rc = sprintf(buf, "%04x\n", chp->desc_fmt1.chid);
+ else
+ rc = 0;
+ mutex_unlock(&chp->lock);
+
+ return rc;
+}
+static DEVICE_ATTR(chid, 0444, chp_chid_show, NULL);
+
+static ssize_t chp_chid_external_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct channel_path *chp = to_channelpath(dev);
+ ssize_t rc;
+
+ mutex_lock(&chp->lock);
+ if (chp->desc_fmt1.flags & 0x10)
+ rc = sprintf(buf, "%x\n", chp->desc_fmt1.flags & 0x8 ? 1 : 0);
+ else
+ rc = 0;
+ mutex_unlock(&chp->lock);
+
+ return rc;
+}
+static DEVICE_ATTR(chid_external, 0444, chp_chid_external_show, NULL);
+
static struct attribute *chp_attrs[] = {
&dev_attr_status.attr,
&dev_attr_configure.attr,
&dev_attr_type.attr,
&dev_attr_cmg.attr,
&dev_attr_shared.attr,
+ &dev_attr_chid.attr,
+ &dev_attr_chid_external.attr,
NULL,
};
static struct attribute_group chp_attr_group = {
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 349d5fc..e7ef2a6 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -43,7 +43,9 @@
u8 chpid;
u32:24;
u8 chpp;
- u32 unused[3];
+ u32 unused[2];
+ u16 chid;
+ u32:16;
u16 mdc;
u16:13;
u8 r:1;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 4e8a179..aefe820 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -72,10 +72,10 @@
source "drivers/staging/iio/Kconfig"
-source "drivers/staging/zram/Kconfig"
-
source "drivers/staging/zsmalloc/Kconfig"
+source "drivers/staging/zram/Kconfig"
+
source "drivers/staging/wlags49_h2/Kconfig"
source "drivers/staging/wlags49_h25/Kconfig"
diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c
index b040200..9bd8747 100644
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@@ -242,7 +242,7 @@
* 'log->buffer' which contains the first entry readable by 'euid'
*/
static size_t get_next_entry_by_uid(struct logger_log *log,
- size_t off, uid_t euid)
+ size_t off, kuid_t euid)
{
while (off != log->w_off) {
struct logger_entry *entry;
@@ -251,7 +251,7 @@
entry = get_entry_header(log, off, &scratch);
- if (entry->euid == euid)
+ if (uid_eq(entry->euid, euid))
return off;
next_len = sizeof(struct logger_entry) + entry->len;
diff --git a/drivers/staging/android/logger.h b/drivers/staging/android/logger.h
index cc6bbd9..70af7d8 100644
--- a/drivers/staging/android/logger.h
+++ b/drivers/staging/android/logger.h
@@ -66,7 +66,7 @@
__s32 tid;
__s32 sec;
__s32 nsec;
- uid_t euid;
+ kuid_t euid;
char msg[0];
};
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 7871579..87e852a 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -981,6 +981,7 @@
config COMEDI_NI_6527
tristate "NI 6527 support"
+ depends on HAS_DMA
select COMEDI_MITE
---help---
Enable support for the National Instruments 6527 PCI card
@@ -990,6 +991,7 @@
config COMEDI_NI_65XX
tristate "NI 65xx static dio PCI card support"
+ depends on HAS_DMA
select COMEDI_MITE
---help---
Enable support for National Instruments 65xx static dio boards.
@@ -1003,6 +1005,7 @@
config COMEDI_NI_660X
tristate "NI 660x counter/timer PCI card support"
+ depends on HAS_DMA
select COMEDI_NI_TIOCMD
---help---
Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
@@ -1013,6 +1016,7 @@
config COMEDI_NI_670X
tristate "NI 670x PCI card support"
+ depends on HAS_DMA
select COMEDI_MITE
---help---
Enable support for National Instruments PCI-6703 and PCI-6704
@@ -1022,6 +1026,7 @@
config COMEDI_NI_LABPC_PCI
tristate "NI Lab-PC PCI-1200 support"
+ depends on HAS_DMA
select COMEDI_NI_LABPC
select COMEDI_MITE
---help---
@@ -1032,6 +1037,7 @@
config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
+ depends on HAS_DMA
select COMEDI_MITE
select COMEDI_8255
---help---
@@ -1043,6 +1049,7 @@
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
+ depends on HAS_DMA
select COMEDI_NI_TIOCMD
select COMEDI_8255
select COMEDI_FC
@@ -1095,10 +1102,12 @@
called ssv_dnp.
config COMEDI_MITE
+ depends on HAS_DMA
tristate
config COMEDI_NI_TIOCMD
tristate
+ depends on HAS_DMA
select COMEDI_NI_TIO
select COMEDI_MITE
diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c
index ca70990..d4be0e6 100644
--- a/drivers/staging/comedi/comedi_buf.c
+++ b/drivers/staging/comedi/comedi_buf.c
@@ -51,10 +51,12 @@
clear_bit(PG_reserved,
&(virt_to_page(buf->virt_addr)->flags));
if (s->async_dma_dir != DMA_NONE) {
+#ifdef CONFIG_HAS_DMA
dma_free_coherent(dev->hw_dev,
PAGE_SIZE,
buf->virt_addr,
buf->dma_addr);
+#endif
} else {
free_page((unsigned long)buf->virt_addr);
}
@@ -74,6 +76,12 @@
struct comedi_buf_page *buf;
unsigned i;
+ if (!IS_ENABLED(CONFIG_HAS_DMA) && s->async_dma_dir != DMA_NONE) {
+ dev_err(dev->class_dev,
+ "dma buffer allocation not supported\n");
+ return;
+ }
+
async->buf_page_list = vzalloc(sizeof(*buf) * n_pages);
if (async->buf_page_list)
pages = vmalloc(sizeof(struct page *) * n_pages);
@@ -84,11 +92,15 @@
for (i = 0; i < n_pages; i++) {
buf = &async->buf_page_list[i];
if (s->async_dma_dir != DMA_NONE)
+#ifdef CONFIG_HAS_DMA
buf->virt_addr = dma_alloc_coherent(dev->hw_dev,
PAGE_SIZE,
&buf->dma_addr,
GFP_KERNEL |
__GFP_COMP);
+#else
+ break;
+#endif
else
buf->virt_addr = (void *)get_zeroed_page(GFP_KERNEL);
if (!buf->virt_addr)
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 00f2547..924c54c 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -246,9 +246,6 @@
return -EBUSY;
}
- if (!async->prealloc_buf)
- return -EINVAL;
-
/* make sure buffer is an integral number of pages
* (we round up) */
new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3d978f3..77a7bb6 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -976,8 +976,7 @@
/* clear flip-flop to make sure 2-byte registers for
* count and address get set correctly */
clear_dma_ff(devpriv->dma_chan);
- set_dma_addr(devpriv->dma_chan,
- virt_to_bus(devpriv->dma_buffer));
+ set_dma_addr(devpriv->dma_chan, devpriv->dma_addr);
/* set appropriate size of transfer */
devpriv->dma_transfer_size = labpc_suggest_transfer_size(cmd);
if (cmd->stop_src == TRIG_COUNT &&
@@ -1089,7 +1088,7 @@
devpriv->count -= num_points;
/* set address and count for next transfer */
- set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer));
+ set_dma_addr(devpriv->dma_chan, devpriv->dma_addr);
set_dma_count(devpriv->dma_chan, leftover * sample_size);
release_dma_lock(flags);
@@ -1741,6 +1740,9 @@
unsigned long dma_flags;
devpriv->dma_chan = dma_chan;
+ devpriv->dma_addr =
+ virt_to_bus(devpriv->dma_buffer);
+
dma_flags = claim_dma_lock();
disable_dma(devpriv->dma_chan);
set_dma_mode(devpriv->dma_chan, DMA_MODE_READ);
diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h
index 615f16f..4b691f5 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -82,6 +82,7 @@
unsigned int divisor_b1;
unsigned int dma_chan; /* dma channel to use */
u16 *dma_buffer; /* buffer ai will dma into */
+ phys_addr_t dma_addr;
/* transfer size in bytes for current transfer */
unsigned int dma_transfer_size;
/* we are using dma/fifo-half-full/etc. */
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index a46d579..8c5dee9 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -310,9 +310,11 @@
static int ni_gpct_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
+#ifdef PCIDMA
static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
static int ni_gpct_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd);
+#endif
static int ni_gpct_cancel(struct comedi_device *dev,
struct comedi_subdevice *s);
static void handle_gpct_interrupt(struct comedi_device *dev,
@@ -4617,9 +4619,7 @@
for (j = 0; j < NUM_GPCT; ++j) {
s = &dev->subdevices[NI_GPCT_SUBDEV(j)];
s->type = COMEDI_SUBD_COUNTER;
- s->subdev_flags =
- SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL | SDF_CMD_READ
- /* | SDF_CMD_WRITE */ ;
+ s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
s->n_chan = 3;
if (board->reg_type & ni_reg_m_series_mask)
s->maxdata = 0xffffffff;
@@ -4628,11 +4628,14 @@
s->insn_read = &ni_gpct_insn_read;
s->insn_write = &ni_gpct_insn_write;
s->insn_config = &ni_gpct_insn_config;
+#ifdef PCIDMA
+ s->subdev_flags |= SDF_CMD_READ /* | SDF_CMD_WRITE */;
s->do_cmd = &ni_gpct_cmd;
s->len_chanlist = 1;
s->do_cmdtest = &ni_gpct_cmdtest;
s->cancel = &ni_gpct_cancel;
s->async_dma_dir = DMA_BIDIRECTIONAL;
+#endif
s->private = &devpriv->counter_dev->counters[j];
devpriv->counter_dev->counters[j].chip_index = 0;
@@ -5216,10 +5219,10 @@
return ni_tio_winsn(counter, insn, data);
}
+#ifdef PCIDMA
static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
int retval;
-#ifdef PCIDMA
struct ni_gpct *counter = s->private;
/* const struct comedi_cmd *cmd = &s->async->cmd; */
@@ -5233,23 +5236,20 @@
ni_tio_acknowledge_and_confirm(counter, NULL, NULL, NULL, NULL);
ni_e_series_enable_second_irq(dev, counter->counter_index, 1);
retval = ni_tio_cmd(counter, s->async);
-#else
- retval = -ENOTSUPP;
-#endif
return retval;
}
+#endif
+#ifdef PCIDMA
static int ni_gpct_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
-#ifdef PCIDMA
struct ni_gpct *counter = s->private;
return ni_tio_cmdtest(counter, cmd);
-#else
return -ENOTSUPP;
-#endif
}
+#endif
static int ni_gpct_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
diff --git a/drivers/staging/dwc2/Kconfig b/drivers/staging/dwc2/Kconfig
index f0b4739..d15d9d5 100644
--- a/drivers/staging/dwc2/Kconfig
+++ b/drivers/staging/dwc2/Kconfig
@@ -2,7 +2,6 @@
tristate "DesignWare USB2 DRD Core Support"
depends on USB
depends on VIRT_TO_BUS
- select USB_OTG_UTILS
help
Say Y or M here if your system has a Dual Role HighSpeed
USB controller based on the DesignWare HSOTG IP Core.
@@ -39,6 +38,7 @@
bool "Enable Missed SOF Tracking"
help
Say Y here to enable logging of missed SOF events to the dmesg log.
+ WARNING: This feature is still experimental.
If in doubt, say N.
config USB_DWC2_DEBUG_PERIODIC
diff --git a/drivers/staging/dwc2/hcd_intr.c b/drivers/staging/dwc2/hcd_intr.c
index 6e5dbed..e24062f 100644
--- a/drivers/staging/dwc2/hcd_intr.c
+++ b/drivers/staging/dwc2/hcd_intr.c
@@ -56,8 +56,6 @@
static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
{
#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
-#warning Compiling code to track missed SOFs
-
u16 curr_frame_number = hsotg->frame_number;
if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c
index b610960..44cce2f 100644
--- a/drivers/staging/dwc2/platform.c
+++ b/drivers/staging/dwc2/platform.c
@@ -95,6 +95,14 @@
hsotg->dev = &dev->dev;
+ /*
+ * Use reasonable defaults so platforms don't have to provide these.
+ */
+ if (!dev->dev.dma_mask)
+ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+ if (!dev->dev.coherent_dma_mask)
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "missing IRQ resource\n");
diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig
index 3c18efe..6905913 100644
--- a/drivers/staging/gdm72xx/Kconfig
+++ b/drivers/staging/gdm72xx/Kconfig
@@ -39,7 +39,7 @@
config WIMAX_GDM72XX_USB_PM
bool "Enable power managerment support"
- depends on USB_SUSPEND
+ depends on PM_RUNTIME
endif # WIMAX_GDM72XX_USB
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index 2856b8f..163c638 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -690,7 +690,6 @@
static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
{
struct mxs_lradc *lradc = iio_priv(iio);
- struct iio_buffer *buffer = iio->buffer;
int ret = 0, chan, ofs = 0;
unsigned long enable = 0;
uint32_t ctrl4_set = 0;
@@ -698,7 +697,7 @@
uint32_t ctrl1_irq = 0;
const uint32_t chan_value = LRADC_CH_ACCUMULATE |
((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
- const int len = bitmap_weight(buffer->scan_mask, LRADC_MAX_TOTAL_CHANS);
+ const int len = bitmap_weight(iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS);
if (!len)
return -EINVAL;
@@ -725,7 +724,7 @@
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
- for_each_set_bit(chan, buffer->scan_mask, LRADC_MAX_TOTAL_CHANS) {
+ for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs);
ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs);
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
index d060f25..c99f890 100644
--- a/drivers/staging/iio/light/tsl2x7x_core.c
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -1869,6 +1869,7 @@
dev_info(&chip->client->dev,
"%s: i2c device found does not match expected id\n",
__func__);
+ ret = -EINVAL;
goto fail1;
}
@@ -1907,7 +1908,7 @@
if (ret) {
dev_err(&clientp->dev,
"%s: irq request failed", __func__);
- goto fail2;
+ goto fail1;
}
}
@@ -1920,17 +1921,17 @@
if (ret) {
dev_err(&clientp->dev,
"%s: iio registration failed\n", __func__);
- goto fail1;
+ goto fail2;
}
dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
return 0;
-fail1:
+fail2:
if (clientp->irq)
free_irq(clientp->irq, indio_dev);
-fail2:
+fail1:
iio_device_free(indio_dev);
return ret;
diff --git a/drivers/staging/imx-drm/Kconfig b/drivers/staging/imx-drm/Kconfig
index 8c9e403..ef699f7 100644
--- a/drivers/staging/imx-drm/Kconfig
+++ b/drivers/staging/imx-drm/Kconfig
@@ -1,6 +1,7 @@
config DRM_IMX
tristate "DRM Support for Freescale i.MX"
select DRM_KMS_HELPER
+ select VIDEOMODE_HELPERS
select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
depends on DRM && (ARCH_MXC || ARCH_MULTIPLATFORM)
@@ -19,10 +20,12 @@
config DRM_IMX_PARALLEL_DISPLAY
tristate "Support for parallel displays"
depends on DRM_IMX
+ select VIDEOMODE_HELPERS
config DRM_IMX_TVE
tristate "Support for TV and VGA displays"
depends on DRM_IMX
+ select REGMAP_MMIO
help
Choose this to enable the internal Television Encoder (TVe)
found on i.MX53 processors.
@@ -30,6 +33,7 @@
config DRM_IMX_IPUV3_CORE
tristate "IPUv3 core support"
depends on DRM_IMX
+ depends on RESET_CONTROLLER
help
Choose this if you have a i.MX5/6 system and want
to use the IPU. This option only enables IPU base
@@ -38,5 +42,6 @@
config DRM_IMX_IPUV3
tristate "DRM Support for i.MX IPUv3"
depends on DRM_IMX
+ depends on DRM_IMX_IPUV3_CORE
help
Choose this if you have a i.MX5 or i.MX6 processor.
diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c
index ac16344..03892de 100644
--- a/drivers/staging/imx-drm/imx-tve.c
+++ b/drivers/staging/imx-drm/imx-tve.c
@@ -670,7 +670,9 @@
tve->dac_reg = devm_regulator_get(&pdev->dev, "dac");
if (!IS_ERR(tve->dac_reg)) {
regulator_set_voltage(tve->dac_reg, 2750000, 2750000);
- regulator_enable(tve->dac_reg);
+ ret = regulator_enable(tve->dac_reg);
+ if (ret)
+ return ret;
}
tve->clk = devm_clk_get(&pdev->dev, "tve");
diff --git a/drivers/staging/media/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig
index ec32776..df6569b 100644
--- a/drivers/staging/media/solo6x10/Kconfig
+++ b/drivers/staging/media/solo6x10/Kconfig
@@ -1,6 +1,7 @@
config SOLO6X10
tristate "Softlogic 6x10 MPEG codec cards"
depends on PCI && VIDEO_DEV && SND && I2C
+ depends on FONTS
select VIDEOBUF2_DMA_SG
select VIDEOBUF2_DMA_CONTIG
select SND_PCM
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 863b22e..197c393 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -124,6 +124,20 @@
EXPORT_SYMBOL_GPL(nvec_register_notifier);
/**
+ * nvec_unregister_notifier - Unregister a notifier with nvec
+ * @nvec: A &struct nvec_chip
+ * @nb: The notifier block to unregister
+ *
+ * Unregisters a notifier with @nvec. The notifier will be removed from the
+ * atomic notifier chain.
+ */
+int nvec_unregister_notifier(struct nvec_chip *nvec, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_unregister(&nvec->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(nvec_unregister_notifier);
+
+/**
* nvec_status_notifier - The final notifier
*
* Prints a message about control events not handled in the notifier
@@ -185,7 +199,7 @@
*
* Free the given message
*/
-inline void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg)
+void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg)
{
if (msg != &nvec->tx_scratch)
dev_vdbg(nvec->dev, "INFO: Free %ti\n", msg - nvec->msg_pool);
@@ -810,7 +824,7 @@
return -ENODEV;
}
- i2c_clk = clk_get(&pdev->dev, "div-clk");
+ i2c_clk = devm_clk_get(&pdev->dev, "div-clk");
if (IS_ERR(i2c_clk)) {
dev_err(nvec->dev, "failed to get controller clock\n");
return -ENODEV;
@@ -897,8 +911,11 @@
nvec_toggle_global_events(nvec, false);
mfd_remove_devices(nvec->dev);
+ nvec_unregister_notifier(nvec, &nvec->nvec_status_notifier);
cancel_work_sync(&nvec->rx_work);
cancel_work_sync(&nvec->tx_work);
+ /* FIXME: needs check wether nvec is responsible for power off */
+ pm_power_off = NULL;
return 0;
}
diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h
index b7a14bc..2b1316d 100644
--- a/drivers/staging/nvec/nvec.h
+++ b/drivers/staging/nvec/nvec.h
@@ -197,9 +197,8 @@
struct notifier_block *nb,
unsigned int events);
-extern int nvec_unregister_notifier(struct device *dev,
- struct notifier_block *nb,
- unsigned int events);
+extern int nvec_unregister_notifier(struct nvec_chip *dev,
+ struct notifier_block *nb);
extern void nvec_msg_free(struct nvec_chip *nvec, struct nvec_msg *msg);
diff --git a/drivers/staging/nvec/nvec_kbd.c b/drivers/staging/nvec/nvec_kbd.c
index 7445ce6..a0ec52a 100644
--- a/drivers/staging/nvec/nvec_kbd.c
+++ b/drivers/staging/nvec/nvec_kbd.c
@@ -169,8 +169,15 @@
static int nvec_kbd_remove(struct platform_device *pdev)
{
+ struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
+ char disable_kbd[] = { NVEC_KBD, DISABLE_KBD },
+ uncnfg_wake_key_reporting[] = { NVEC_KBD, CNFG_WAKE_KEY_REPORTING,
+ false };
+ nvec_write_async(nvec, uncnfg_wake_key_reporting, 3);
+ nvec_write_async(nvec, disable_kbd, 2);
+ nvec_unregister_notifier(nvec, &keys_dev.notifier);
+
input_unregister_device(keys_dev.input);
- input_free_device(keys_dev.input);
return 0;
}
@@ -188,4 +195,5 @@
MODULE_AUTHOR("Marc Dietrich <marvin24@gmx.de>");
MODULE_DESCRIPTION("NVEC keyboard driver");
+MODULE_ALIAS("platform:nvec-kbd");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/nvec/nvec_power.c b/drivers/staging/nvec/nvec_power.c
index 296f7b9..aacfcd6 100644
--- a/drivers/staging/nvec/nvec_power.c
+++ b/drivers/staging/nvec/nvec_power.c
@@ -414,6 +414,7 @@
struct nvec_power *power = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&power->poller);
+ nvec_unregister_notifier(power->nvec, &power->notifier);
switch (pdev->id) {
case AC:
power_supply_unregister(&nvec_psy);
diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c
index aff6b9b..06dbb02 100644
--- a/drivers/staging/nvec/nvec_ps2.c
+++ b/drivers/staging/nvec/nvec_ps2.c
@@ -106,7 +106,7 @@
struct serio *ser_dev;
char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 };
- ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL);
+ ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (ser_dev == NULL)
return -ENOMEM;
@@ -133,6 +133,11 @@
static int nvec_mouse_remove(struct platform_device *pdev)
{
+ struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent);
+
+ ps2_sendcommand(ps2_dev.ser_dev, DISABLE_MOUSE);
+ ps2_stopstreaming(ps2_dev.ser_dev);
+ nvec_unregister_notifier(nvec, &ps2_dev.notifier);
serio_unregister_port(ps2_dev.ser_dev);
return 0;
@@ -179,4 +184,5 @@
MODULE_DESCRIPTION("NVEC mouse driver");
MODULE_AUTHOR("Marc Dietrich <marvin24@gmx.de>");
+MODULE_ALIAS("platform:nvec-mouse");
MODULE_LICENSE("GPL");
diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig
index 185b676..aab945a 100644
--- a/drivers/staging/sep/Kconfig
+++ b/drivers/staging/sep/Kconfig
@@ -1,6 +1,6 @@
config DX_SEP
tristate "Discretix SEP driver"
- depends on PCI
+ depends on PCI && CRYPTO
help
Discretix SEP driver; used for the security processor subsystem
on board the Intel Mobile Internet Device and adds SEP availability
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index fe667dd..386362c 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -1087,7 +1087,11 @@
unsigned char intr_status;
struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
- regulator_enable(rmi4_data->regulator);
+ retval = regulator_enable(rmi4_data->regulator);
+ if (retval) {
+ dev_err(dev, "Regulator enable failed (%d)\n", retval);
+ return retval;
+ }
enable_irq(rmi4_data->i2c_client->irq);
rmi4_data->touch_stopped = false;
diff --git a/drivers/staging/vt6656/hostap.c b/drivers/staging/vt6656/hostap.c
index f4f1bf7..c699a30 100644
--- a/drivers/staging/vt6656/hostap.c
+++ b/drivers/staging/vt6656/hostap.c
@@ -133,7 +133,7 @@
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- kfree(pDevice->apdev);
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c
index c335808..d0cf7d8 100644
--- a/drivers/staging/vt6656/iwctl.c
+++ b/drivers/staging/vt6656/iwctl.c
@@ -1345,9 +1345,12 @@
return rc;
}
+ spin_lock_irq(&pDevice->lock);
+
if (wrq->disabled) {
pDevice->ePSMode = WMAC_POWER_CAM;
PSvDisablePowerSaving(pDevice);
+ spin_unlock_irq(&pDevice->lock);
return rc;
}
if ((wrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
@@ -1358,6 +1361,9 @@
pDevice->ePSMode = WMAC_POWER_FAST;
PSvEnablePowerSaving((void *)pDevice, pMgmt->wListenInterval);
}
+
+ spin_unlock_irq(&pDevice->lock);
+
switch (wrq->flags & IW_POWER_MODE) {
case IW_POWER_UNICAST_R:
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWPOWER: IW_POWER_UNICAST_R \n");
diff --git a/drivers/staging/zcache/ramster/ramster-howto.txt b/drivers/staging/zcache/ramster/ramster-howto.txt
new file mode 100644
index 0000000..7b1ee3b
--- /dev/null
+++ b/drivers/staging/zcache/ramster/ramster-howto.txt
@@ -0,0 +1,366 @@
+ RAMSTER HOW-TO
+
+Author: Dan Magenheimer
+Ramster maintainer: Konrad Wilk <konrad.wilk@oracle.com>
+
+This is a HOWTO document for ramster which, as of this writing, is in
+the kernel as a subdirectory of zcache in drivers/staging, called ramster.
+(Zcache can be built with or without ramster functionality.) If enabled
+and properly configured, ramster allows memory capacity load balancing
+across multiple machines in a cluster. Further, the ramster code serves
+as an example of asynchronous access for zcache (as well as cleancache and
+frontswap) that may prove useful for future transcendent memory
+implementations, such as KVM and NVRAM. While ramster works today on
+any network connection that supports kernel sockets, its features may
+become more interesting on future high-speed fabrics/interconnects.
+
+Ramster requires both kernel and userland support. The userland support,
+called ramster-tools, is known to work with EL6-based distros, but is a
+set of poorly-hacked slightly-modified cluster tools based on ocfs2, which
+includes an init file, a config file, and a userland binary that interfaces
+to the kernel. This state of userland support reflects the abysmal userland
+skills of this suitably-embarrassed author; any help/patches to turn
+ramster-tools into more distributable rpms/debs useful for a wider range
+of distros would be appreciated. The source RPM that can be used as a
+starting point is available at:
+ http://oss.oracle.com/projects/tmem/files/RAMster/
+
+As a result of this author's ignorance, userland setup described in this
+HOWTO assumes an EL6 distro and is described in EL6 syntax. Apologies
+if this offends anyone!
+
+Kernel support has only been tested on x86_64. Systems with an active
+ocfs2 filesystem should work, but since ramster leverages a lot of
+code from ocfs2, there may be latent issues. A kernel configuration that
+includes CONFIG_OCFS2_FS should build OK, and should certainly run OK
+if no ocfs2 filesystem is mounted.
+
+This HOWTO demonstrates memory capacity load balancing for a two-node
+cluster, where one node called the "local" node becomes overcommitted
+and the other node called the "remote" node provides additional RAM
+capacity for use by the local node. Ramster is capable of more complex
+topologies; see the last section titled "ADVANCED RAMSTER TOPOLOGIES".
+
+If you find any terms in this HOWTO unfamiliar or don't understand the
+motivation for ramster, the following LWN reading is recommended:
+-- Transcendent Memory in a Nutshell (lwn.net/Articles/454795)
+-- The future calculus of memory management (lwn.net/Articles/475681)
+And since ramster is built on top of zcache, this article may be helpful:
+-- In-kernel memory compression (lwn.net/Articles/545244)
+
+Now that you've memorized the contents of those articles, let's get started!
+
+A. PRELIMINARY
+
+1) Install two x86_64 Linux systems that are known to work when
+ upgraded to a recent upstream Linux kernel version.
+
+On each system:
+
+2) Configure, build and install, then boot Linux, just to ensure it
+ can be done with an unmodified upstream kernel. Confirm you booted
+ the upstream kernel with "uname -a".
+
+3) If you plan to do any performance testing or unless you plan to
+ test only swapping, the "WasActive" patch is also highly recommended.
+ (Search lkml.org for WasActive, apply the patch, rebuild your kernel.)
+ For a demo or simple testing, the patch can be ignored.
+
+4) Install ramster-tools as root. An x86_64 rpm for EL6-based systems
+ can be found at:
+ http://oss.oracle.com/projects/tmem/files/RAMster/
+ (Sorry but for now, non-EL6 users must recreate ramster-tools on
+ their own from source. See above.)
+
+5) Ensure that debugfs is mounted at each boot. Examples below assume it
+ is mounted at /sys/kernel/debug.
+
+B. BUILDING RAMSTER INTO THE KERNEL
+
+Do the following on each system:
+
+1) Using the kernel configuration mechanism of your choice, change
+ your config to include:
+
+ CONFIG_CLEANCACHE=y
+ CONFIG_FRONTSWAP=y
+ CONFIG_STAGING=y
+ CONFIG_CONFIGFS_FS=y # NOTE: MUST BE y, not m
+ CONFIG_ZCACHE=y
+ CONFIG_RAMSTER=y
+
+ For a linux-3.10 or later kernel, you should also set:
+
+ CONFIG_ZCACHE_DEBUG=y
+ CONFIG_RAMSTER_DEBUG=y
+
+ Before building the kernel please doublecheck your kernel config
+ file to ensure all of the settings are correct.
+
+2) Build this kernel and change your boot file (e.g. /etc/grub.conf)
+ so that the new kernel will boot.
+
+3) Add "zcache" and "ramster" as kernel boot parameters for the new kernel.
+
+4) Reboot each system approximately simultaneously.
+
+5) Check dmesg to ensure there are some messages from ramster, prefixed
+ by "ramster:"
+
+ # dmesg | grep ramster
+
+ You should also see a lot of files in:
+
+ # ls /sys/kernel/debug/zcache
+ # ls /sys/kernel/debug/ramster
+
+ These are mostly counters for various zcache and ramster activities.
+ You should also see files in:
+
+ # ls /sys/kernel/mm/ramster
+
+ These are sysfs files that control ramster as we shall see.
+
+ Ramster now will act as a single-system zcache on each system
+ but doesn't yet know anything about the cluster so can't yet do
+ anything remotely.
+
+C. CONFIGURING THE RAMSTER CLUSTER
+
+This part can be error prone unless you are familiar with clustering
+filesystems. We need to describe the cluster in a /etc/ramster.conf
+file and the init scripts that parse it are extremely picky about
+the syntax.
+
+1) Create a /etc/ramster.conf file and ensure it is identical on both
+ systems. This file mimics the ocfs2 format and there is a good amount
+ of documentation that can be searched for ocfs2.conf, but you can use:
+
+ cluster:
+ name = ramster
+ node_count = 2
+ node:
+ name = system1
+ cluster = ramster
+ number = 0
+ ip_address = my.ip.ad.r1
+ ip_port = 7777
+ node:
+ name = system2
+ cluster = ramster
+ number = 1
+ ip_address = my.ip.ad.r2
+ ip_port = 7777
+
+ You must ensure that the "name" field in the file exactly matches
+ the output of "hostname" on each system; if "hostname" shows a
+ fully-qualified hostname, ensure the name is fully qualified in
+ /etc/ramster.conf. Obviously, substitute my.ip.ad.rx with proper
+ ip addresses.
+
+2) Enable the ramster service and configure it. If you used the
+ EL6 ramster-tools, this would be:
+
+ # chkconfig --add ramster
+ # service ramster configure
+
+ Set "load on boot" to "y", cluster to start is "ramster" (or whatever
+ name you chose in ramster.conf), heartbeat dead threshold as "500",
+ network idle timeout as "1000000". Leave the others as default.
+
+3) Reboot both systems. After reboot, try (assuming EL6 ramster-tools):
+
+ # service ramster status
+
+ You should see "Checking RAMSTER cluster "ramster": Online". If you do
+ not, something is wrong and ramster will not work. Note that you
+ should also see that the driver for "configfs" is loaded and mounted,
+ the driver for ocfs2_dlmfs is not loaded, and some numbers for network
+ parameters. You will also see "Checking RAMSTER heartbeat: Not active".
+ That's all OK.
+
+4) Now you need to start the cluster heartbeat; the cluster is not "up"
+ until all nodes detect a heartbeat. In a real cluster, heartbeat detection
+ is done via a cluster filesystem, but ramster doesn't require one. Some
+ hack-y kernel code in ramster can start the heartbeat for you though if
+ you tell it what nodes are "up". To enable the heartbeat, do:
+
+ # echo 0 > /sys/kernel/mm/ramster/manual_node_up
+ # echo 1 > /sys/kernel/mm/ramster/manual_node_up
+
+ This must be done on BOTH nodes and, to avoid timeouts, must be done
+ approximately concurrently on both nodes. On an EL6 system, it is
+ convenient to put these lines in /etc/rc.local. To confirm that the
+ cluster is now up, on both systems do:
+
+ # dmesg | grep ramster
+
+ You should see ramster "Accepted connection" messages in dmesg on both
+ nodes after this. Note that if you check userland status again with
+
+ # service ramster status
+
+ you will still see "Checking RAMSTER heartbeat: Not active". That's
+ still OK... the ramster kernel heartbeat hack doesn't communicate to
+ userland.
+
+5) You now must tell each node the node to which it should "remotify" pages.
+ On this two node cluster, we will assume the "local" node, node 0, has
+ memory overcommitted and will use ramster to utilize RAM capacity on
+ the "remote node", node 1. To configure this, on node 0, you do:
+
+ # echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+ You should see "ramster: node 1 set as remotification target" in dmesg
+ on node 0. Again, on EL6, /etc/rc.local is a good place to put this
+ on node 0 so you don't forget to do it at each boot.
+
+6) One more step: By default, the ramster code does not "remotify" any
+ pages; this is primarily for testing purposes, but sometimes it is
+ useful. This may change in the future, but for now, on node 0, you do:
+
+ # echo 1 > /sys/kernel/mm/ramster/pers_remotify_enable
+ # echo 1 > /sys/kernel/mm/ramster/eph_remotify_enable
+
+ The first enables remotifying swap (persistent, aka frontswap) pages,
+ the second enables remotifying of page cache (ephemeral, cleancache)
+ pages.
+
+ On EL6, these lines can also be put in /etc/rc.local (AFTER the
+ node_up lines), or at the beginning of a script that runs a workload.
+
+7) Note that most testing has been done with both/all machines booted
+ roughly simultaneously to avoid cluster timeouts. Ideally, you should
+ do this too unless you are trying to break ramster rather than just
+ use it. ;-)
+
+D. TESTING RAMSTER
+
+1) Note that ramster has no value unless pages get "remotified". For
+ swap/frontswap/persistent pages, this doesn't happen unless/until
+ the workload would cause swapping to occur, at which point pages
+ are put into frontswap/zcache, and the remotification thread starts
+ working. To get to the point where the system swaps, you either
+ need a workload for which the working set exceeds the RAM in the
+ system; or you need to somehow reduce the amount of RAM one of
+ the system sees. This latter is easy when testing in a VM, but
+ harder on physical systems. In some cases, "mem=xxxM" on the
+ kernel command line restricts memory, but for some values of xxx
+ the kernel may fail to boot. One may also try creating a fixed
+ RAMdisk, doing nothing with it, but ensuring that it eats up a fixed
+ amount of RAM.
+
+2) To see if ramster is working, on the "remote node", node 1, try:
+
+ # grep . /sys/kernel/debug/ramster/foreign_*
+ # # note, that is space-dot-space between grep and the pathname
+
+ to monitor the number (and max) ephemeral and persistent pages
+ that ramster has sent. If these stay at zero, ramster is not working
+ either because the workload on the local node (node 0) isn't creating
+ enough memory pressure or because "remotifying" isn't working. On the
+ local system, node 0, you can watch lots of useful information also.
+ Try:
+
+ grep . /sys/kernel/debug/zcache/*pageframes* \
+ /sys/kernel/debug/zcache/*zbytes* \
+ /sys/kernel/debug/zcache/*zpages* \
+ /sys/kernel/debug/ramster/*remote*
+
+ Of particular note are the remote_*_pages_succ_get counters. These
+ show how many disk reads and/or disk writes have been avoided on the
+ overcommitted local system by storing pages remotely using ramster.
+
+ At the risk of information overload, you can also grep:
+
+ /sys/kernel/debug/cleancache/* and /sys/kernel/debug/frontswap/*
+
+ These show, for example, how many disk reads and/or disk writes have
+ been avoided by using zcache to optimize RAM on the local system.
+
+
+AUTOMATIC SWAP REPATRIATION
+
+You may notice that while the systems are idle, the foreign persistent
+page count on the remote machine slowly decreases. This is because
+ramster implements "frontswap selfshrinking": When possible, swap
+pages that have been remotified are slowly repatriated to the local
+machine. This is so that local RAM can be used when possible and
+so that, in case of remote machine crash, the probability of loss
+of data is reduced.
+
+REBOOTING / POWEROFF
+
+If a system is shut down while some of its swap pages still reside
+on a remote system, the system may lock up during the shutdown
+sequence. This will occur if the network is shut down before the
+swap mechansim is shut down, which is the default ordering on many
+distros. To avoid this annoying problem, simply shut off the swap
+subsystem before starting the shutdown sequence, e.g.:
+
+ # swapoff -a
+ # reboot
+
+Ideally, this swapoff-before-ifdown ordering should be enforced permanently
+using shutdown scripts.
+
+KNOWN PROBLEMS
+
+1) You may periodically see messages such as:
+
+ ramster_r2net, message length problem
+
+ This is harmless but indicates that a node is sending messages
+ containing compressed pages that exceed the maximum for zcache
+ (PAGE_SIZE*15/16). The sender side needs to be fixed.
+
+2) If you see a "No longer connected to node..." message or a "No connection
+ established with node X after N seconds", it is possible you may
+ be in an unrecoverable state. If you are certain all of the
+ appropriate cluster configuration steps described above have been
+ performed, try rebooting the two servers concurrently to see if
+ the cluster starts.
+
+ Note that "Connection to node... shutdown, state 7" is an intermediate
+ connection state. As long as you later see "Accepted connection", the
+ intermediate states are harmless.
+
+3) There are known issues in counting certain values. As a result
+ you may see periodic warnings from the kernel. Almost always you
+ will see "ramster: bad accounting for XXX". There are also "WARN_ONCE"
+ messages. If you see kernel warnings with a tombstone, please report
+ them. They are harmless but reflect bugs that need to be eventually fixed.
+
+ADVANCED RAMSTER TOPOLOGIES
+
+The kernel code for ramster can support up to eight nodes in a cluster,
+but no testing has been done with more than three nodes.
+
+In the example described above, the "remote" node serves as a RAM
+overflow for the "local" node. This can be made symmetric by appropriate
+settings of the sysfs remote_target_nodenum file. For example, by setting:
+
+ # echo 1 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 0, and
+
+ # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 1, each node can serve as a RAM overflow for the other.
+
+For more than two nodes, a "RAM server" can be configured. For a
+three node system, set:
+
+ # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 1, and
+
+ # echo 0 > /sys/kernel/mm/ramster/remote_target_nodenum
+
+on node 2. Then node 0 is a RAM server for node 1 and node 2.
+
+In this implementation of ramster, any remote node is potentially a single
+point of failure (SPOF). Though the probability of failure is reduced
+by automatic swap repatriation (see above), a proposed future enhancement
+to ramster improves high-availability for the cluster by sending a copy
+of each page of date to two other nodes. Patches welcome!
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index 522cb8e..dcceed2 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1922,15 +1922,15 @@
#ifdef CONFIG_ZCACHE_MODULE
#ifdef CONFIG_RAMSTER
-module_param(ramster_enabled, int, S_IRUGO);
+module_param(ramster_enabled, bool, S_IRUGO);
module_param(disable_frontswap_selfshrink, int, S_IRUGO);
#endif
-module_param(disable_cleancache, int, S_IRUGO);
-module_param(disable_frontswap, int, S_IRUGO);
+module_param(disable_cleancache, bool, S_IRUGO);
+module_param(disable_frontswap, bool, S_IRUGO);
#ifdef FRONTSWAP_HAS_EXCLUSIVE_GETS
module_param(frontswap_has_exclusive_gets, bool, S_IRUGO);
#endif
-module_param(disable_frontswap_ignore_nonactive, int, S_IRUGO);
+module_param(disable_frontswap_ignore_nonactive, bool, S_IRUGO);
module_param(zcache_comp_name, charp, S_IRUGO);
module_init(zcache_init);
MODULE_LICENSE("GPL");
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 6d0c27c..9bffcec 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -859,6 +859,7 @@
*/
static void __exit ehv_bc_exit(void)
{
+ platform_driver_unregister(&ehv_bc_tty_driver);
tty_unregister_driver(ehv_bc_driver);
put_tty_driver(ehv_bc_driver);
kfree(bcs);
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 71d6eb2..4c4a236 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1618,8 +1618,12 @@
if (ip->type == PORT_16550A)
me->fifo[p] = 1;
- opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
- opmode &= OP_MODE_MASK;
+ if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) {
+ opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
+ opmode &= OP_MODE_MASK;
+ } else {
+ opmode = RS232_MODE;
+ }
me->iftype[p] = opmode;
mutex_unlock(&port->mutex);
}
@@ -1676,6 +1680,9 @@
int shiftbit;
unsigned char val, mask;
+ if (info->board->chip_flag != MOXA_MUST_MU860_HWID)
+ return -EFAULT;
+
p = tty->index % 4;
if (cmd == MOXA_SET_OP_MODE) {
if (get_user(opmode, (int __user *) argp))
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d655416..6c7fe90 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1573,6 +1573,14 @@
ldata->real_raw = 0;
}
n_tty_set_room(tty);
+ /*
+ * Fix tty hang when I_IXON(tty) is cleared, but the tty
+ * been stopped by STOP_CHAR(tty) before it.
+ */
+ if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
+ start_tty(tty);
+ }
+
/* The termios change make the tty ready for I/O */
wake_up_interruptible(&tty->write_wait);
wake_up_interruptible(&tty->read_wait);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 82d35c5..354564e 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -150,12 +150,14 @@
AIOP_INTR_BIT_3
};
+#ifdef CONFIG_PCI
static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = {
UPCI_AIOP_INTR_BIT_0,
UPCI_AIOP_INTR_BIT_1,
UPCI_AIOP_INTR_BIT_2,
UPCI_AIOP_INTR_BIT_3
};
+#endif
static Byte_t RData[RDATASIZE] = {
0x00, 0x09, 0xf6, 0x82,
@@ -227,7 +229,6 @@
static int __init init_ISA(int i);
static void rp_wait_until_sent(struct tty_struct *tty, int timeout);
static void rp_flush_buffer(struct tty_struct *tty);
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model);
static unsigned char GetLineNumber(int ctrl, int aiop, int ch);
static unsigned char SetLineNumber(int ctrl, int aiop, int ch);
static void rp_start(struct tty_struct *tty);
@@ -241,11 +242,6 @@
static void sModemReset(CONTROLLER_T * CtlP, int chan, int on);
static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on);
static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data);
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
- ByteIO_t * AiopIOList, int AiopIOListSize,
- WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
- int PeriodicOnly, int altChanRingIndicator,
- int UPCIRingInd);
static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO,
ByteIO_t * AiopIOList, int AiopIOListSize,
int IRQNum, Byte_t Frequency, int PeriodicOnly);
@@ -1775,6 +1771,145 @@
};
MODULE_DEVICE_TABLE(pci, rocket_pci_ids);
+/* Resets the speaker controller on RocketModem II and III devices */
+static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
+{
+ ByteIO_t addr;
+
+ /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
+ if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
+ addr = CtlP->AiopIO[0] + 0x4F;
+ sOutB(addr, 0);
+ }
+
+ /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
+ if ((model == MODEL_UPCI_RM3_8PORT)
+ || (model == MODEL_UPCI_RM3_4PORT)) {
+ addr = CtlP->AiopIO[0] + 0x88;
+ sOutB(addr, 0);
+ }
+}
+
+/***************************************************************************
+Function: sPCIInitController
+Purpose: Initialization of controller global registers and controller
+ structure.
+Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
+ IRQNum,Frequency,PeriodicOnly)
+ CONTROLLER_T *CtlP; Ptr to controller structure
+ int CtlNum; Controller number
+ ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
+ This list must be in the order the AIOPs will be found on the
+ controller. Once an AIOP in the list is not found, it is
+ assumed that there are no more AIOPs on the controller.
+ int AiopIOListSize; Number of addresses in AiopIOList
+ int IRQNum; Interrupt Request number. Can be any of the following:
+ 0: Disable global interrupts
+ 3: IRQ 3
+ 4: IRQ 4
+ 5: IRQ 5
+ 9: IRQ 9
+ 10: IRQ 10
+ 11: IRQ 11
+ 12: IRQ 12
+ 15: IRQ 15
+ Byte_t Frequency: A flag identifying the frequency
+ of the periodic interrupt, can be any one of the following:
+ FREQ_DIS - periodic interrupt disabled
+ FREQ_137HZ - 137 Hertz
+ FREQ_69HZ - 69 Hertz
+ FREQ_34HZ - 34 Hertz
+ FREQ_17HZ - 17 Hertz
+ FREQ_9HZ - 9 Hertz
+ FREQ_4HZ - 4 Hertz
+ If IRQNum is set to 0 the Frequency parameter is
+ overidden, it is forced to a value of FREQ_DIS.
+ int PeriodicOnly: 1 if all interrupts except the periodic
+ interrupt are to be blocked.
+ 0 is both the periodic interrupt and
+ other channel interrupts are allowed.
+ If IRQNum is set to 0 the PeriodicOnly parameter is
+ overidden, it is forced to a value of 0.
+Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
+ initialization failed.
+
+Comments:
+ If periodic interrupts are to be disabled but AIOP interrupts
+ are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
+
+ If interrupts are to be completely disabled set IRQNum to 0.
+
+ Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
+ invalid combination.
+
+ This function performs initialization of global interrupt modes,
+ but it does not actually enable global interrupts. To enable
+ and disable global interrupts use functions sEnGlobalInt() and
+ sDisGlobalInt(). Enabling of global interrupts is normally not
+ done until all other initializations are complete.
+
+ Even if interrupts are globally enabled, they must also be
+ individually enabled for each channel that is to generate
+ interrupts.
+
+Warnings: No range checking on any of the parameters is done.
+
+ No context switches are allowed while executing this function.
+
+ After this function all AIOPs on the controller are disabled,
+ they can be enabled with sEnAiop().
+*/
+static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
+ ByteIO_t * AiopIOList, int AiopIOListSize,
+ WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
+ int PeriodicOnly, int altChanRingIndicator,
+ int UPCIRingInd)
+{
+ int i;
+ ByteIO_t io;
+
+ CtlP->AltChanRingIndicator = altChanRingIndicator;
+ CtlP->UPCIRingInd = UPCIRingInd;
+ CtlP->CtlNum = CtlNum;
+ CtlP->CtlID = CTLID_0001; /* controller release 1 */
+ CtlP->BusType = isPCI; /* controller release 1 */
+
+ if (ConfigIO) {
+ CtlP->isUPCI = 1;
+ CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
+ CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
+ CtlP->AiopIntrBits = upci_aiop_intr_bits;
+ } else {
+ CtlP->isUPCI = 0;
+ CtlP->PCIIO =
+ (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
+ CtlP->AiopIntrBits = aiop_intr_bits;
+ }
+
+ sPCIControllerEOI(CtlP); /* clear EOI if warm init */
+ /* Init AIOPs */
+ CtlP->NumAiop = 0;
+ for (i = 0; i < AiopIOListSize; i++) {
+ io = AiopIOList[i];
+ CtlP->AiopIO[i] = (WordIO_t) io;
+ CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
+
+ CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
+ if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
+ break; /* done looking for AIOPs */
+
+ CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
+ sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
+ sOutB(io + _INDX_DATA, sClockPrescale);
+ CtlP->NumAiop++; /* bump count of AIOPs */
+ }
+
+ if (CtlP->NumAiop == 0)
+ return (-1);
+ else
+ return (CtlP->NumAiop);
+}
+
/*
* Called when a PCI card is found. Retrieves and stores model information,
* init's aiopic and serial port hardware.
@@ -2519,147 +2654,6 @@
return (CtlP->NumAiop);
}
-#ifdef CONFIG_PCI
-/***************************************************************************
-Function: sPCIInitController
-Purpose: Initialization of controller global registers and controller
- structure.
-Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize,
- IRQNum,Frequency,PeriodicOnly)
- CONTROLLER_T *CtlP; Ptr to controller structure
- int CtlNum; Controller number
- ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
- This list must be in the order the AIOPs will be found on the
- controller. Once an AIOP in the list is not found, it is
- assumed that there are no more AIOPs on the controller.
- int AiopIOListSize; Number of addresses in AiopIOList
- int IRQNum; Interrupt Request number. Can be any of the following:
- 0: Disable global interrupts
- 3: IRQ 3
- 4: IRQ 4
- 5: IRQ 5
- 9: IRQ 9
- 10: IRQ 10
- 11: IRQ 11
- 12: IRQ 12
- 15: IRQ 15
- Byte_t Frequency: A flag identifying the frequency
- of the periodic interrupt, can be any one of the following:
- FREQ_DIS - periodic interrupt disabled
- FREQ_137HZ - 137 Hertz
- FREQ_69HZ - 69 Hertz
- FREQ_34HZ - 34 Hertz
- FREQ_17HZ - 17 Hertz
- FREQ_9HZ - 9 Hertz
- FREQ_4HZ - 4 Hertz
- If IRQNum is set to 0 the Frequency parameter is
- overidden, it is forced to a value of FREQ_DIS.
- int PeriodicOnly: 1 if all interrupts except the periodic
- interrupt are to be blocked.
- 0 is both the periodic interrupt and
- other channel interrupts are allowed.
- If IRQNum is set to 0 the PeriodicOnly parameter is
- overidden, it is forced to a value of 0.
-Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller
- initialization failed.
-
-Comments:
- If periodic interrupts are to be disabled but AIOP interrupts
- are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0.
-
- If interrupts are to be completely disabled set IRQNum to 0.
-
- Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an
- invalid combination.
-
- This function performs initialization of global interrupt modes,
- but it does not actually enable global interrupts. To enable
- and disable global interrupts use functions sEnGlobalInt() and
- sDisGlobalInt(). Enabling of global interrupts is normally not
- done until all other initializations are complete.
-
- Even if interrupts are globally enabled, they must also be
- individually enabled for each channel that is to generate
- interrupts.
-
-Warnings: No range checking on any of the parameters is done.
-
- No context switches are allowed while executing this function.
-
- After this function all AIOPs on the controller are disabled,
- they can be enabled with sEnAiop().
-*/
-static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum,
- ByteIO_t * AiopIOList, int AiopIOListSize,
- WordIO_t ConfigIO, int IRQNum, Byte_t Frequency,
- int PeriodicOnly, int altChanRingIndicator,
- int UPCIRingInd)
-{
- int i;
- ByteIO_t io;
-
- CtlP->AltChanRingIndicator = altChanRingIndicator;
- CtlP->UPCIRingInd = UPCIRingInd;
- CtlP->CtlNum = CtlNum;
- CtlP->CtlID = CTLID_0001; /* controller release 1 */
- CtlP->BusType = isPCI; /* controller release 1 */
-
- if (ConfigIO) {
- CtlP->isUPCI = 1;
- CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL;
- CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL;
- CtlP->AiopIntrBits = upci_aiop_intr_bits;
- } else {
- CtlP->isUPCI = 0;
- CtlP->PCIIO =
- (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC);
- CtlP->AiopIntrBits = aiop_intr_bits;
- }
-
- sPCIControllerEOI(CtlP); /* clear EOI if warm init */
- /* Init AIOPs */
- CtlP->NumAiop = 0;
- for (i = 0; i < AiopIOListSize; i++) {
- io = AiopIOList[i];
- CtlP->AiopIO[i] = (WordIO_t) io;
- CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
-
- CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */
- if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */
- break; /* done looking for AIOPs */
-
- CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */
- sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */
- sOutB(io + _INDX_DATA, sClockPrescale);
- CtlP->NumAiop++; /* bump count of AIOPs */
- }
-
- if (CtlP->NumAiop == 0)
- return (-1);
- else
- return (CtlP->NumAiop);
-}
-
-/* Resets the speaker controller on RocketModem II and III devices */
-static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model)
-{
- ByteIO_t addr;
-
- /* RocketModem II speaker control is at the 8th port location of offset 0x40 */
- if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) {
- addr = CtlP->AiopIO[0] + 0x4F;
- sOutB(addr, 0);
- }
-
- /* RocketModem III speaker control is at the 1st port location of offset 0x80 */
- if ((model == MODEL_UPCI_RM3_8PORT)
- || (model == MODEL_UPCI_RM3_4PORT)) {
- addr = CtlP->AiopIO[0] + 0x88;
- sOutB(addr, 0);
- }
-}
-#endif
-
/***************************************************************************
Function: sReadAiopID
Purpose: Read the AIOP idenfication number directly from an AIOP.
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index beaa283..d07b6af 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -338,7 +338,8 @@
{
struct dw8250_data *data = dev_get_drvdata(dev);
- clk_disable_unprepare(data->clk);
+ if (!IS_ERR(data->clk))
+ clk_disable_unprepare(data->clk);
return 0;
}
@@ -347,7 +348,8 @@
{
struct dw8250_data *data = dev_get_drvdata(dev);
- clk_prepare_enable(data->clk);
+ if (!IS_ERR(data->clk))
+ clk_prepare_enable(data->clk);
return 0;
}
@@ -367,6 +369,7 @@
static const struct acpi_device_id dw8250_acpi_match[] = {
{ "INT33C4", 0 },
{ "INT33C5", 0 },
+ { "80860F0A", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8ab70a6..e2774f9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -332,7 +332,7 @@
dmaengine_slave_config(chan, &rx_conf);
uap->dmarx.chan = chan;
- if (plat->dma_rx_poll_enable) {
+ if (plat && plat->dma_rx_poll_enable) {
/* Set poll rate if specified. */
if (plat->dma_rx_poll_rate) {
uap->dmarx.auto_poll_rate = false;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index e956377..65be0c0 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -707,8 +707,10 @@
if (rc)
return rc;
rc = platform_driver_register(&mcf_platform_driver);
- if (rc)
+ if (rc) {
+ uart_unregister_driver(&mcf_driver);
return rc;
+ }
return 0;
}
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 018bad9..f51b280 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1497,18 +1497,23 @@
if (psc_ops && psc_ops->fifoc_init) {
ret = psc_ops->fifoc_init();
if (ret)
- return ret;
+ goto err_init;
}
ret = platform_driver_register(&mpc52xx_uart_of_driver);
if (ret) {
printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
__FILE__, ret);
- uart_unregister_driver(&mpc52xx_uart_driver);
- return ret;
+ goto err_reg;
}
return 0;
+err_reg:
+ if (psc_ops && psc_ops->fifoc_uninit)
+ psc_ops->fifoc_uninit();
+err_init:
+ uart_unregister_driver(&mpc52xx_uart_driver);
+ return ret;
}
static void __exit
diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c
index 77287c5..549c70a2 100644
--- a/drivers/tty/serial/nwpserial.c
+++ b/drivers/tty/serial/nwpserial.c
@@ -199,7 +199,7 @@
dcr_write(up->dcr_host, UART_IER, up->ier);
/* free irq */
- free_irq(up->port.irq, port);
+ free_irq(up->port.irq, up);
}
static int nwpserial_verify_port(struct uart_port *port,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 30d4f7a..f0b9f6b 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -202,26 +202,6 @@
return pdata->get_context_loss_count(up->dev);
}
-static void serial_omap_set_forceidle(struct uart_omap_port *up)
-{
- struct omap_uart_port_info *pdata = up->dev->platform_data;
-
- if (!pdata || !pdata->set_forceidle)
- return;
-
- pdata->set_forceidle(up->dev);
-}
-
-static void serial_omap_set_noidle(struct uart_omap_port *up)
-{
- struct omap_uart_port_info *pdata = up->dev->platform_data;
-
- if (!pdata || !pdata->set_noidle)
- return;
-
- pdata->set_noidle(up->dev);
-}
-
static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
{
struct omap_uart_port_info *pdata = up->dev->platform_data;
@@ -298,8 +278,6 @@
serial_out(up, UART_IER, up->ier);
}
- serial_omap_set_forceidle(up);
-
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
@@ -364,7 +342,6 @@
pm_runtime_get_sync(up->dev);
serial_omap_enable_ier_thri(up);
- serial_omap_set_noidle(up);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 074b919..8942941 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1803,6 +1803,7 @@
static void __exit s3c24xx_serial_modexit(void)
{
+ platform_driver_unregister(&samsung_serial_driver);
uart_unregister_driver(&s3c24xx_uart_drv);
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index fbd447b..740202d 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -779,7 +779,6 @@
con_set_default_unimap(vc);
vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf) {
- tty_port_destroy(&vc->port);
kfree(vc);
vc_cons[currcons].d = NULL;
return -ENOMEM;
@@ -986,26 +985,25 @@
return ret;
}
-void vc_deallocate(unsigned int currcons)
+struct vc_data *vc_deallocate(unsigned int currcons)
{
+ struct vc_data *vc = NULL;
+
WARN_CONSOLE_UNLOCKED();
if (vc_cons_allocated(currcons)) {
- struct vc_data *vc = vc_cons[currcons].d;
- struct vt_notifier_param param = { .vc = vc };
+ struct vt_notifier_param param;
+ param.vc = vc = vc_cons[currcons].d;
atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m);
vcs_remove_sysfs(currcons);
vc->vc_sw->con_deinit(vc);
put_pid(vc->vt_pid);
module_put(vc->vc_sw->owner);
kfree(vc->vc_screenbuf);
- if (currcons >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc->port);
- kfree(vc);
- }
vc_cons[currcons].d = NULL;
}
+ return vc;
}
/*
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 98ff173..fc2c06c 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -283,6 +283,51 @@
return 0;
}
+/* deallocate a single console, if possible (leave 0) */
+static int vt_disallocate(unsigned int vc_num)
+{
+ struct vc_data *vc = NULL;
+ int ret = 0;
+
+ if (!vc_num)
+ return 0;
+
+ console_lock();
+ if (VT_BUSY(vc_num))
+ ret = -EBUSY;
+ else
+ vc = vc_deallocate(vc_num);
+ console_unlock();
+
+ if (vc && vc_num >= MIN_NR_CONSOLES) {
+ tty_port_destroy(&vc->port);
+ kfree(vc);
+ }
+
+ return ret;
+}
+
+/* deallocate all unused consoles, but leave 0 */
+static void vt_disallocate_all(void)
+{
+ struct vc_data *vc[MAX_NR_CONSOLES];
+ int i;
+
+ console_lock();
+ for (i = 1; i < MAX_NR_CONSOLES; i++)
+ if (!VT_BUSY(i))
+ vc[i] = vc_deallocate(i);
+ else
+ vc[i] = NULL;
+ console_unlock();
+
+ for (i = 1; i < MAX_NR_CONSOLES; i++) {
+ if (vc[i] && i >= MIN_NR_CONSOLES) {
+ tty_port_destroy(&vc[i]->port);
+ kfree(vc[i]);
+ }
+ }
+}
/*
@@ -769,24 +814,10 @@
ret = -ENXIO;
break;
}
- if (arg == 0) {
- /* deallocate all unused consoles, but leave 0 */
- console_lock();
- for (i=1; i<MAX_NR_CONSOLES; i++)
- if (! VT_BUSY(i))
- vc_deallocate(i);
- console_unlock();
- } else {
- /* deallocate a single console, if possible */
- arg--;
- if (VT_BUSY(arg))
- ret = -EBUSY;
- else if (arg) { /* leave 0 */
- console_lock();
- vc_deallocate(arg);
- console_unlock();
- }
- }
+ if (arg == 0)
+ vt_disallocate_all();
+ else
+ ret = vt_disallocate(--arg);
break;
case VT_RESIZE:
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index e92eeaf..5295be0 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -45,6 +45,7 @@
config UIO_DMEM_GENIRQ
tristate "Userspace platform driver with generic irq and dynamic memory"
+ depends on HAS_DMA
help
Platform driver for Userspace I/O devices, including generic
interrupt handling code. Shared interrupts are not supported.
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index b7eb86a..8a7eb77 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -686,7 +686,8 @@
{
int ret, len;
__le32 *buf;
- int offb, offd;
+ int offb;
+ unsigned int offd;
const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
int buflen = ((size - 1) / stride + 1 + size * 2) * 4;
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 608a2ae..b2df442 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,7 +20,7 @@
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
depends on USB=y || USB=USB_CHIPIDEA
- depends on USB_EHCI_HCD
+ depends on USB_EHCI_HCD=y
select USB_EHCI_ROOT_HUB_TT
help
Say Y here to enable host controller functionality of the
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8faec9d..73f9d5f 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -173,17 +173,10 @@
ci13xxx_imx_platdata.phy = data->phy;
- if (!pdev->dev.dma_mask) {
- pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
- sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
- if (!pdev->dev.dma_mask) {
- ret = -ENOMEM;
- dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
- goto err;
- }
- *pdev->dev.dma_mask = DMA_BIT_MASK(32);
- dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
- }
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (usbmisc_ops && usbmisc_ops->init) {
ret = usbmisc_ops->init(&pdev->dev);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 8772b36..db535b0 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -51,7 +51,7 @@
config USB_OTG
bool "OTG support"
- depends on USB_SUSPEND
+ depends on PM_RUNTIME
default n
help
The most notable feature of USB OTG is support for a
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ab5638d..a635988 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -88,6 +88,9 @@
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Alcor Micro Corp. Hub */
+ { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index ea5ee9c..757aa18 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -19,21 +19,21 @@
config USB_DWC3_HOST
bool "Host only mode"
- depends on USB
+ depends on USB=y || USB=USB_DWC3
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
- depends on USB_GADGET
+ depends on USB_GADGET=y || USB_GADGET=USB_DWC3
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
- depends on (USB && USB_GADGET)
+ depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index a8afe6e..929e7dd 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -95,8 +95,6 @@
return 0;
}
-static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
-
static int dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos *exynos;
@@ -118,7 +116,9 @@
* Once we move to full device tree support this will vanish off.
*/
if (!dev->dma_mask)
- dev->dma_mask = &dwc3_exynos_dma_mask;
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
platform_set_drvdata(pdev, exynos);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 83300d9..f41aa0d 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -146,7 +146,6 @@
depends on ARCH_LPC32XX
depends on USB_PHY
select USB_ISP1301
- select USB_OTG_UTILS
help
This option selects the USB device controller in the LPC32xx SoC.
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index f2a970f..5a5128a 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1992,8 +1992,6 @@
err_get_hclk:
clk_put(pclk);
- platform_set_drvdata(pdev, NULL);
-
return ret;
}
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
index 7922977..fd24cb4 100644
--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -2410,7 +2410,6 @@
usb_del_gadget_udc(&udc->gadget);
BUG_ON(udc->driver);
- platform_set_drvdata(pdev, NULL);
bcm63xx_uninit_udc_hw(udc);
return 0;
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 3d5cfc9..80e7f75 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -821,8 +821,10 @@
gi->gstrings[i] = NULL;
s = usb_gstrings_attach(&gi->cdev, gi->gstrings,
USB_GADGET_FIRST_AVAIL_IDX);
- if (IS_ERR(s))
+ if (IS_ERR(s)) {
+ ret = PTR_ERR(s);
goto err_comp_cleanup;
+ }
gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id;
gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id;
@@ -847,8 +849,10 @@
}
cfg->gstrings[i] = NULL;
s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1);
- if (IS_ERR(s))
+ if (IS_ERR(s)) {
+ ret = PTR_ERR(s);
goto err_comp_cleanup;
+ }
c->iConfiguration = s[0].id;
}
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a792e32..c588e8e 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1001,7 +1001,6 @@
struct dummy *dum = platform_get_drvdata(pdev);
usb_del_gadget_udc(&dum->gadget);
- platform_set_drvdata(pdev, NULL);
device_remove_file(&dum->gadget.dev, &dev_attr_function);
return 0;
}
@@ -2661,8 +2660,10 @@
}
for (i = 0; i < mod_data.num; i++) {
dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
- if (!dum[i])
+ if (!dum[i]) {
+ retval = -ENOMEM;
goto err_add_pdata;
+ }
retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
sizeof(void *));
if (retval)
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index d893d69..abf8a31 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -816,6 +816,7 @@
* @c: the configuration to support the network link
* @ethaddr: a buffer in which the ethernet address of the host side
* side of the link was recorded
+ * @dev: eth_dev structure
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 185d6f5..7be04b3 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -373,6 +373,7 @@
* @c: the configuration to support the network link
* @ethaddr: a buffer in which the ethernet address of the host side
* side of the link was recorded
+ * @dev: eth_dev structure
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index c7468b6..03c1fb6 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -456,8 +456,6 @@
{
struct snd_card *card = platform_get_drvdata(pdev);
- platform_set_drvdata(pdev, NULL);
-
if (card)
return snd_card_free(card);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index cec8871..b8632d40 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1461,8 +1461,10 @@
fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
GFP_KERNEL);
- if (fusb300->ep0_req == NULL)
+ if (fusb300->ep0_req == NULL) {
+ ret = -ENOMEM;
goto clean_up3;
+ }
init_controller(fusb300);
ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index b5cebd6..9b2d24e 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1511,8 +1511,6 @@
if (pdata->exit)
pdata->exit(&pdev->dev);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 866ef09..51cfe72 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1660,8 +1660,10 @@
m66592->epaddr2ep[0] = &m66592->ep[0];
m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
- if (m66592->ep0_req == NULL)
+ if (m66592->ep0_req == NULL) {
+ ret = -ENOMEM;
goto clean_up3;
+ }
m66592->ep0_req->complete = nop_completion;
init_controller(m66592);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index ef47495..95c531d 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -2236,7 +2236,6 @@
dev->transceiver = NULL;
}
- platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;
}
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 0b742d1..7ff7d9c 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1977,8 +1977,10 @@
r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
GFP_KERNEL);
- if (r8a66597->ep0_req == NULL)
+ if (r8a66597->ep0_req == NULL) {
+ ret = -ENOMEM;
goto clean_up3;
+ }
r8a66597->ep0_req->complete = nop_completion;
ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index a3cdc32..af22f24 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -437,7 +437,7 @@
if (hs_req->req.length == 0)
return;
- usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in);
+ usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
}
/**
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d0e75e1..09c4f70 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1851,6 +1851,7 @@
irq = gpio_to_irq(udc_info->vbus_pin);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
+ retval = irq;
goto err_gpio_claim;
}
@@ -1948,8 +1949,6 @@
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
- platform_set_drvdata(pdev, NULL);
-
if (!IS_ERR(udc_clock) && udc_clock != NULL) {
clk_disable(udc_clock);
clk_put(udc_clock);
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2cd6262..0deb9d6 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -284,12 +284,16 @@
ss_opts->bulk_buflen = gzero_options.bulk_buflen;
func_ss = usb_get_function(func_inst_ss);
- if (IS_ERR(func_ss))
+ if (IS_ERR(func_ss)) {
+ status = PTR_ERR(func_ss);
goto err_put_func_inst_ss;
+ }
func_inst_lb = usb_get_function_instance("Loopback");
- if (IS_ERR(func_inst_lb))
+ if (IS_ERR(func_inst_lb)) {
+ status = PTR_ERR(func_inst_lb);
goto err_put_func_ss;
+ }
lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
lb_opts->bulk_buflen = gzero_options.bulk_buflen;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index de94f26..344d5e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -507,7 +507,7 @@
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on PCI || SPARC_LEON || ARCH_VT8500
+ depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
@@ -524,26 +524,19 @@
config USB_UHCI_SUPPORT_NON_PCI_HC
bool
- depends on USB_UHCI_HCD
- default y if (SPARC_LEON || ARCH_VT8500)
+ default y if (SPARC_LEON || USB_UHCI_PLATFORM)
config USB_UHCI_PLATFORM
- bool "Generic UHCI Platform Driver support"
- depends on USB_UHCI_SUPPORT_NON_PCI_HC
+ bool
default y if ARCH_VT8500
- ---help---
- Enable support for generic UHCI platform devices that require no
- additional configuration.
config USB_UHCI_BIG_ENDIAN_MMIO
bool
- depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
- default y
+ default y if SPARC_LEON
config USB_UHCI_BIG_ENDIAN_DESC
bool
- depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
- default y
+ default y if SPARC_LEON
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 6642009..02f4611 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -63,8 +63,6 @@
/*-------------------------------------------------------------------------*/
-static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -93,7 +91,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &at91_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 312fc10..246e124 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1286,23 +1286,6 @@
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
-#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
- !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
- !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
- !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \
- !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
-#error "missing bus glue for ehci-hcd"
-#endif
-
static int __init ehci_hcd_init(void)
{
int retval = 0;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 3d1491b..16d7150 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -90,8 +90,6 @@
.extra_priv_size = sizeof(struct omap_hcd),
};
-static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
-
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@@ -146,8 +144,10 @@
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &omap_ehci_dma_mask;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
dev_name(dev));
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 54c5794..efbc588 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -137,8 +137,6 @@
}
}
-static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
-
static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -183,7 +181,9 @@
* now. Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ehci_orion_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 6357752..379037f 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -71,8 +71,6 @@
dev_err(dev, "can't request ehci vbus gpio %d", gpio);
}
-static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
-
static int s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
@@ -90,7 +88,7 @@
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ehci_s5p_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -107,6 +105,7 @@
if (IS_ERR(phy)) {
/* Fallback to pdata */
if (!pdata) {
+ usb_put_hcd(hcd);
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
return -EPROBE_DEFER;
} else {
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 61ecfb3..bd3e5cb 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -58,8 +58,6 @@
static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
ehci_spear_drv_resume);
-static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd ;
@@ -84,7 +82,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &spear_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e3eddc3..59d111b 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -637,8 +637,6 @@
writel(val, base + TEGRA_USB_PORTSC1);
}
-static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -661,7 +659,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
setup_vbus_gpio(pdev, pdata);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 125e261..2facee5 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1739,7 +1739,7 @@
int retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index bbb791b..a13709e 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -373,8 +373,10 @@
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
pr_warning("isp1760: IRQ resource not available\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto cleanup;
}
+
irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
if (priv) {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a0cb44f..2ee1496 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -504,8 +504,6 @@
MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
-static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -522,7 +520,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &at91_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 07592c0..b0b542c 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -98,8 +98,6 @@
.start_port_reset = ohci_start_port_reset,
};
-static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
-
static int exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
@@ -117,7 +115,7 @@
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ohci_exynos_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9e6de95..fc627fd 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -233,14 +233,14 @@
urb->start_frame = frame;
}
} else if (ed->type == PIPE_ISOCHRONOUS) {
- u16 next = ohci_frame_no(ohci) + 2;
+ u16 next = ohci_frame_no(ohci) + 1;
u16 frame = ed->last_iso + ed->interval;
/* Behind the scheduling threshold? */
if (unlikely(tick_before(frame, next))) {
/* USB_ISO_ASAP: Round up to the first available slot */
- if (urb->transfer_flags & URB_ISO_ASAP)
+ if (urb->transfer_flags & URB_ISO_ASAP) {
frame += (next - frame + ed->interval - 1) &
-ed->interval;
@@ -248,21 +248,25 @@
* Not ASAP: Use the next slot in the stream. If
* the entire URB falls before the threshold, fail.
*/
- else if (tick_before(frame + ed->interval *
+ } else {
+ if (tick_before(frame + ed->interval *
(urb->number_of_packets - 1), next)) {
- retval = -EXDEV;
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- goto fail;
- }
+ retval = -EXDEV;
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
- /*
- * Some OHCI hardware doesn't handle late TDs
- * correctly. After retiring them it proceeds to
- * the next ED instead of the next TD. Therefore
- * we have to omit the late TDs entirely.
- */
- urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
- ed->interval);
+ /*
+ * Some OHCI hardware doesn't handle late TDs
+ * correctly. After retiring them it proceeds
+ * to the next ED instead of the next TD.
+ * Therefore we have to omit the late TDs
+ * entirely.
+ */
+ urb_priv->td_cnt = DIV_ROUND_UP(
+ (u16) (next - frame),
+ ed->interval);
+ }
}
urb->start_frame = frame;
}
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index f303cb0..5d7eb72 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -223,8 +223,7 @@
isp1301_i2c_client = isp1301_get_client(isp1301_node);
if (!isp1301_i2c_client) {
- ret = -EPROBE_DEFER;
- goto out;
+ return -EPROBE_DEFER;
}
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -234,7 +233,7 @@
if (usb_disabled()) {
dev_err(&pdev->dev, "USB is disabled\n");
ret = -ENODEV;
- goto out;
+ goto fail_disable;
}
/* Enable AHB slave USB clock, needed for further USB clock control */
@@ -245,19 +244,19 @@
if (IS_ERR(usb_pll_clk)) {
dev_err(&pdev->dev, "failed to acquire USB PLL\n");
ret = PTR_ERR(usb_pll_clk);
- goto out1;
+ goto fail_pll;
}
ret = clk_enable(usb_pll_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB PLL\n");
- goto out2;
+ goto fail_pllen;
}
ret = clk_set_rate(usb_pll_clk, 48000);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set USB clock rate\n");
- goto out3;
+ goto fail_rate;
}
/* Enable USB device clock */
@@ -265,13 +264,13 @@
if (IS_ERR(usb_dev_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_dev_clk);
- goto out4;
+ goto fail_dev;
}
ret = clk_enable(usb_dev_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
- goto out5;
+ goto fail_deven;
}
/* Enable USB otg clocks */
@@ -279,7 +278,7 @@
if (IS_ERR(usb_otg_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_otg_clk);
- goto out6;
+ goto fail_otg;
}
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
@@ -287,7 +286,7 @@
ret = clk_enable(usb_otg_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
- goto out7;
+ goto fail_otgen;
}
isp1301_configure();
@@ -296,14 +295,14 @@
if (!hcd) {
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
ret = -ENOMEM;
- goto out8;
+ goto fail_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
- goto out8;
+ goto fail_resource;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
@@ -311,7 +310,7 @@
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = -ENXIO;
- goto out8;
+ goto fail_resource;
}
nxp_start_hc();
@@ -325,23 +324,24 @@
return ret;
nxp_stop_hc();
-out8:
+fail_resource:
usb_put_hcd(hcd);
-out7:
+fail_hcd:
clk_disable(usb_otg_clk);
-out6:
+fail_otgen:
clk_put(usb_otg_clk);
-out5:
+fail_otg:
clk_disable(usb_dev_clk);
-out4:
+fail_deven:
clk_put(usb_dev_clk);
-out3:
+fail_dev:
+fail_rate:
clk_disable(usb_pll_clk);
-out2:
+fail_pllen:
clk_put(usb_pll_clk);
-out1:
+fail_pll:
+fail_disable:
isp1301_i2c_client = NULL;
-out:
return ret;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index ddfc314..8663851 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -114,8 +114,6 @@
/*-------------------------------------------------------------------------*/
-static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
-
/*
* configure so an HC device and id are always provided
* always called with process context; sleeping is OK
@@ -168,8 +166,10 @@
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &omap_ohci_dma_mask;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
dev_name(dev));
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index efe71f3..279b2ef 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -282,8 +282,6 @@
MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
-static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int ohci_pxa_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -298,7 +296,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &pxa_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 9020bf0..3e19e01 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -91,8 +91,6 @@
.start_port_reset = ohci_start_port_reset,
};
-static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
{
const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -114,7 +112,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &spear_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4f0f033..0f401db 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3084,7 +3084,7 @@
int ports, i, retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ad4483e..b2ec7fe 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
* and usb-storage.
*
* TODO:
- * - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
+ * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
* - various issues noted in the code
* - performance work; use both register banks; ...
* - use urb->iso_frame_desc[] with ISO transfers
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f87bee6..9189bc9 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -225,7 +225,8 @@
/* auto-stop if nothing connected for 1 second */
if (any_ports_active(uhci))
uhci->rh_state = UHCI_RH_RUNNING;
- else if (time_after_eq(jiffies, uhci->auto_stop_time))
+ else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+ !uhci->wait_for_hp)
suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
break;
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 8c4dace..f1db61a 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,8 +60,6 @@
.hub_control = uhci_hub_control,
};
-static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
-
static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -78,7 +76,9 @@
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &platform_uhci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
pdev->name);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f0976d8..041c6dd 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1287,7 +1287,7 @@
return -EINVAL; /* Can't change the period */
} else {
- next = uhci->frame_number + 2;
+ next = uhci->frame_number + 1;
/* Find the next unused frame */
if (list_empty(&qh->queue)) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 965b539..2cfc465 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1423,15 +1423,17 @@
ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
/* Set the max packet size and max burst */
+ max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+ max_burst = 0;
switch (udev->speed) {
case USB_SPEED_SUPER:
- max_packet = usb_endpoint_maxp(&ep->desc);
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
/* dig out max burst from ep companion desc */
- max_packet = ep->ss_ep_comp.bMaxBurst;
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
+ max_burst = ep->ss_ep_comp.bMaxBurst;
break;
case USB_SPEED_HIGH:
+ /* Some devices get this wrong */
+ if (usb_endpoint_xfer_bulk(&ep->desc))
+ max_packet = 512;
/* bits 11:12 specify the number of additional transaction
* opportunities per microframe (USB 2.0, section 9.6.6)
*/
@@ -1439,17 +1441,16 @@
usb_endpoint_xfer_int(&ep->desc)) {
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
}
- /* Fall through */
+ break;
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
break;
default:
BUG();
}
+ ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
+ MAX_BURST(max_burst));
max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 3a18e44..e1b661d 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -560,6 +560,7 @@
if (!config) {
dev_err(&pdev->dev,
"failed to allocate musb hdrc config\n");
+ ret = -ENOMEM;
goto err2;
}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 3551f1a..628b93f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -549,7 +549,8 @@
glue->control_otghs = omap_get_control_dev();
if (IS_ERR(glue->control_otghs)) {
dev_vdbg(&pdev->dev, "Failed to get control device\n");
- return -ENODEV;
+ ret = PTR_ERR(glue->control_otghs);
+ goto err2;
}
} else {
glue->control_otghs = ERR_PTR(-ENODEV);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 371d0e7..7ef3eb8 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -25,7 +25,7 @@
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
select USB_OTG
help
Enable this to support Freescale USB OTG transceiver.
@@ -139,7 +139,6 @@
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
- select USB_OTG_UTILS
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
@@ -162,7 +161,7 @@
config USB_MV_OTG
tristate "Marvell USB OTG support"
- depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
+ depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
select USB_OTG
help
Say Y here if you want to build Marvell USB OTG transciever
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 4acef26..e5eb1b5 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -892,8 +892,6 @@
else if (ab->mode == USB_PERIPHERAL)
ab8500_usb_peri_phy_dis(ab);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 97b9308..e771baf 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -799,6 +799,7 @@
/* initialize the otg structure */
fsl_otg_tc->phy.label = DRIVER_DESC;
+ fsl_otg_tc->phy.dev = &pdev->dev;
fsl_otg_tc->phy.set_power = fsl_otg_set_power;
fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy;
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index 4c76074..8443335 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -266,6 +266,7 @@
platform_set_drvdata(pdev, gpio_vbus);
gpio_vbus->dev = &pdev->dev;
gpio_vbus->phy.label = "gpio-vbus";
+ gpio_vbus->phy.dev = gpio_vbus->dev;
gpio_vbus->phy.set_power = gpio_vbus_set_power;
gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
@@ -343,7 +344,6 @@
gpio_free(pdata->gpio_pullup);
gpio_free(pdata->gpio_vbus);
err_gpio:
- platform_set_drvdata(pdev, NULL);
kfree(gpio_vbus->phy.otg);
kfree(gpio_vbus);
return err;
@@ -365,7 +365,6 @@
if (gpio_is_valid(pdata->gpio_pullup))
gpio_free(pdata->gpio_pullup);
gpio_free(gpio);
- platform_set_drvdata(pdev, NULL);
kfree(gpio_vbus->phy.otg);
kfree(gpio_vbus);
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 225ae6c..8a55b37 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -102,6 +102,7 @@
mutex_init(&isp->mutex);
phy = &isp->phy;
+ phy->dev = &client->dev;
phy->label = DRV_NAME;
phy->init = isp1301_phy_init;
phy->set_vbus = isp1301_phy_set_vbus;
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index c987bbe..4a6b03c 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -667,7 +667,6 @@
mv_otg_disable(mvotg);
usb_remove_phy(&mvotg->phy);
- platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -850,8 +849,6 @@
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
- platform_set_drvdata(pdev, NULL);
-
return retval;
}
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index eb25dd2..bd601c5 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -155,6 +155,7 @@
mxs_phy->phy.set_suspend = mxs_phy_suspend;
mxs_phy->phy.notify_connect = mxs_phy_on_connect;
mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
+ mxs_phy->phy.type = USB_PHY_TYPE_USB2;
ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
@@ -175,8 +176,6 @@
usb_remove_phy(&mxs_phy->phy);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c
index 2b10cc9..638cc5d 100644
--- a/drivers/usb/phy/phy-nop.c
+++ b/drivers/usb/phy/phy-nop.c
@@ -254,8 +254,6 @@
usb_remove_phy(&nop->phy);
- platform_set_drvdata(pdev, NULL);
-
return 0;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 242b577..7260ec6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -189,6 +189,8 @@
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
+ { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) },
+ { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -924,8 +926,8 @@
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static int ftdi_chars_in_buffer(struct tty_struct *tty);
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static bool ftdi_tx_empty(struct usb_serial_port *port);
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
@@ -961,7 +963,7 @@
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .chars_in_buffer = ftdi_chars_in_buffer,
+ .tx_empty = ftdi_tx_empty,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -2056,27 +2058,18 @@
}
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
+static bool ftdi_tx_empty(struct usb_serial_port *port)
{
- struct usb_serial_port *port = tty->driver_data;
- int chars;
unsigned char buf[2];
int ret;
- chars = usb_serial_generic_chars_in_buffer(tty);
- if (chars)
- goto out;
-
- /* Check if hardware buffer is empty. */
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret == 2) {
if (!(buf[1] & FTDI_RS_TEMT))
- chars = 1;
+ return false;
}
-out:
- dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
- return chars;
+ return true;
}
/* old_termios contains the original termios settings and tty->termios contains
@@ -2268,10 +2261,9 @@
* Returns the number of status bytes retrieved (device dependant), or
* negative error code.
*/
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2])
{
- struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
@@ -2336,7 +2328,7 @@
unsigned char buf[2];
int ret;
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret < 0)
return ret;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 9852827..6dd7925 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -772,6 +772,8 @@
*/
#define NEWPORT_VID 0x104D
#define NEWPORT_AGILIS_PID 0x3000
+#define NEWPORT_CONEX_CC_PID 0x3002
+#define NEWPORT_CONEX_AGP_PID 0x3006
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 297665f..ba45170 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -253,6 +253,37 @@
}
EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
+void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int bps;
+ unsigned long period;
+ unsigned long expire;
+
+ bps = tty_get_baud_rate(tty);
+ if (!bps)
+ bps = 9600; /* B0 */
+ /*
+ * Use a poll-period of roughly the time it takes to send one
+ * character or at least one jiffy.
+ */
+ period = max_t(unsigned long, (10 * HZ / bps), 1);
+ period = min_t(unsigned long, period, timeout);
+
+ dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
+ __func__, jiffies_to_msecs(timeout),
+ jiffies_to_msecs(period));
+ expire = jiffies + timeout;
+ while (!port->serial->type->tx_empty(port)) {
+ schedule_timeout_interruptible(period);
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
+
static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
int index, gfp_t mem_flags)
{
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 158bf4b..1be6ba7 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2019,8 +2019,6 @@
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- int ret;
-
if (edge_port == NULL)
return 0;
@@ -2028,16 +2026,22 @@
chars = kfifo_len(&edge_port->write_fifo);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- if (!chars) {
- ret = tx_active(edge_port);
- if (ret > 0)
- chars = ret;
- }
-
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+static bool edge_tx_empty(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ int ret;
+
+ ret = tx_active(edge_port);
+ if (ret > 0)
+ return false;
+
+ return true;
+}
+
static void edge_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2557,6 +2561,7 @@
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
@@ -2589,6 +2594,7 @@
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7343728..93d02bc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -196,6 +196,7 @@
#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */
#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
+#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
@@ -341,8 +342,8 @@
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
-#define CINTERION_PRODUCT_AH6 0x0055
-#define CINTERION_PRODUCT_PLS8 0x0060
+#define CINTERION_PRODUCT_AHXX 0x0055
+#define CINTERION_PRODUCT_PLXX 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -771,6 +772,7 @@
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -966,6 +968,8 @@
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
@@ -1264,8 +1268,9 @@
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index cac47ae..c92c5ed 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -101,6 +101,7 @@
const unsigned char *data, int count);
static int ti_write_room(struct tty_struct *tty);
static int ti_chars_in_buffer(struct tty_struct *tty);
+static bool ti_tx_empty(struct usb_serial_port *port);
static void ti_throttle(struct tty_struct *tty);
static void ti_unthrottle(struct tty_struct *tty);
static int ti_ioctl(struct tty_struct *tty,
@@ -222,6 +223,7 @@
.write = ti_write,
.write_room = ti_write_room,
.chars_in_buffer = ti_chars_in_buffer,
+ .tx_empty = ti_tx_empty,
.throttle = ti_throttle,
.unthrottle = ti_unthrottle,
.ioctl = ti_ioctl,
@@ -253,6 +255,7 @@
.write = ti_write,
.write_room = ti_write_room,
.chars_in_buffer = ti_chars_in_buffer,
+ .tx_empty = ti_tx_empty,
.throttle = ti_throttle,
.unthrottle = ti_unthrottle,
.ioctl = ti_ioctl,
@@ -684,8 +687,6 @@
struct ti_port *tport = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- int ret;
- u8 lsr;
if (tport == NULL)
return 0;
@@ -694,16 +695,22 @@
chars = kfifo_len(&tport->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- if (!chars) {
- ret = ti_get_lsr(tport, &lsr);
- if (!ret && !(lsr & TI_LSR_TX_EMPTY))
- chars = 1;
- }
-
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+static bool ti_tx_empty(struct usb_serial_port *port)
+{
+ struct ti_port *tport = usb_get_serial_port_data(port);
+ int ret;
+ u8 lsr;
+
+ ret = ti_get_lsr(tport, &lsr);
+ if (!ret && !(lsr & TI_LSR_TX_EMPTY))
+ return false;
+
+ return true;
+}
static void ti_throttle(struct tty_struct *tty)
{
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index cf75beb..4753c00 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -359,20 +359,29 @@
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
- int count = 0;
dev_dbg(tty->dev, "%s\n", __func__);
- mutex_lock(&serial->disc_mutex);
- /* if the device was unplugged then any remaining characters
- fell out of the connector ;) */
if (serial->disconnected)
- count = 0;
- else
- count = serial->type->chars_in_buffer(tty);
- mutex_unlock(&serial->disc_mutex);
+ return 0;
- return count;
+ return serial->type->chars_in_buffer(tty);
+}
+
+static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+
+ dev_dbg(tty->dev, "%s\n", __func__);
+
+ if (!port->serial->type->wait_until_sent)
+ return;
+
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ port->serial->type->wait_until_sent(tty, timeout);
+ mutex_unlock(&serial->disc_mutex);
}
static void serial_throttle(struct tty_struct *tty)
@@ -1191,6 +1200,7 @@
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
+ .wait_until_sent = serial_wait_until_sent,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
@@ -1316,6 +1326,8 @@
set_to_generic_if_null(device, close);
set_to_generic_if_null(device, write_room);
set_to_generic_if_null(device, chars_in_buffer);
+ if (device->tx_empty)
+ set_to_generic_if_null(device, wait_until_sent);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, process_read_urb);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 8623577..281be56 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -105,8 +105,9 @@
int status_len;
u32 flag;
-#ifdef CONFIG_REALTEK_AUTOPM
struct us_data *us;
+
+#ifdef CONFIG_REALTEK_AUTOPM
struct timer_list rts51x_suspend_timer;
unsigned long timer_expires;
int pwr_state;
@@ -988,6 +989,7 @@
us->extra = chip;
us->extra_destructor = realtek_cr_destructor;
us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
+ chip->us = us;
usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
@@ -1010,10 +1012,8 @@
SET_AUTO_DELINK(chip);
}
#ifdef CONFIG_REALTEK_AUTOPM
- if (ss_en) {
- chip->us = us;
+ if (ss_en)
realtek_cr_autosuspend_setup(us);
- }
#endif
usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d71d60f..2e937bd 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2199,7 +2199,7 @@
config FB_GOLDFISH
tristate "Goldfish Framebuffer"
- depends on FB
+ depends on FB && HAS_DMA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2453,6 +2453,23 @@
help
This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+config FB_SIMPLE
+ bool "Simple framebuffer support"
+ depends on (FB = y) && OF
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Say Y if you want support for a simple frame-buffer.
+
+ This driver assumes that the display hardware has been initialized
+ before the kernel boots, and the kernel will simply render to the
+ pre-allocated frame buffer surface.
+
+ Configuration re: surface address, size, and format must be provided
+ through device tree, or potentially plain old platform data in the
+ future.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/omap2/Kconfig"
source "drivers/video/exynos/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7234e4a..e8bae8d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -166,6 +166,7 @@
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o
obj-$(CONFIG_FB_MXS) += mxsfb.o
obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE) += simplefb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
index a862e91..48da25c 100644
--- a/drivers/video/console/Makefile
+++ b/drivers/video/console/Makefile
@@ -18,6 +18,8 @@
font-objs += $(font-objs-y)
+obj-$(CONFIG_FONTS) += font.o
+
# Each configuration option enables a list of files.
obj-$(CONFIG_DUMMY_CONSOLE) += dummycon.o
diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c
new file mode 100644
index 0000000..e2e9e3e
--- /dev/null
+++ b/drivers/video/simplefb.c
@@ -0,0 +1,234 @@
+/*
+ * Simplest possible simple frame-buffer driver, as a platform device
+ *
+ * Copyright (c) 2013, Stephen Warren
+ *
+ * Based on q40fb.c, which was:
+ * Copyright (C) 2001 Richard Zidlicky <rz@linux-m68k.org>
+ *
+ * Also based on offb.c, which was:
+ * Copyright (C) 1997 Geert Uytterhoeven
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct fb_fix_screeninfo simplefb_fix = {
+ .id = "simple",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo simplefb_var = {
+ .height = -1,
+ .width = -1,
+ .activate = FB_ACTIVATE_NOW,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ u32 *pal = info->pseudo_palette;
+ u32 cr = red >> (16 - info->var.red.length);
+ u32 cg = green >> (16 - info->var.green.length);
+ u32 cb = blue >> (16 - info->var.blue.length);
+ u32 value;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ value = (cr << info->var.red.offset) |
+ (cg << info->var.green.offset) |
+ (cb << info->var.blue.offset);
+ if (info->var.transp.length > 0) {
+ u32 mask = (1 << info->var.transp.length) - 1;
+ mask <<= info->var.transp.offset;
+ value |= mask;
+ }
+ pal[regno] = value;
+
+ return 0;
+}
+
+static struct fb_ops simplefb_ops = {
+ .owner = THIS_MODULE,
+ .fb_setcolreg = simplefb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+struct simplefb_format {
+ const char *name;
+ u32 bits_per_pixel;
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+ struct fb_bitfield transp;
+};
+
+static struct simplefb_format simplefb_formats[] = {
+ { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} },
+};
+
+struct simplefb_params {
+ u32 width;
+ u32 height;
+ u32 stride;
+ struct simplefb_format *format;
+};
+
+static int simplefb_parse_dt(struct platform_device *pdev,
+ struct simplefb_params *params)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+ const char *format;
+ int i;
+
+ ret = of_property_read_u32(np, "width", ¶ms->width);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse width property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "height", ¶ms->height);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse height property\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "stride", ¶ms->stride);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse stride property\n");
+ return ret;
+ }
+
+ ret = of_property_read_string(np, "format", &format);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't parse format property\n");
+ return ret;
+ }
+ params->format = NULL;
+ for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) {
+ if (strcmp(format, simplefb_formats[i].name))
+ continue;
+ params->format = &simplefb_formats[i];
+ break;
+ }
+ if (!params->format) {
+ dev_err(&pdev->dev, "Invalid format value\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int simplefb_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct simplefb_params params;
+ struct fb_info *info;
+ struct resource *mem;
+
+ if (fb_get_options("simplefb", NULL))
+ return -ENODEV;
+
+ ret = simplefb_parse_dt(pdev, ¶ms);
+ if (ret)
+ return ret;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "No memory resource\n");
+ return -EINVAL;
+ }
+
+ info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev);
+ if (!info)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, info);
+
+ info->fix = simplefb_fix;
+ info->fix.smem_start = mem->start;
+ info->fix.smem_len = resource_size(mem);
+ info->fix.line_length = params.stride;
+
+ info->var = simplefb_var;
+ info->var.xres = params.width;
+ info->var.yres = params.height;
+ info->var.xres_virtual = params.width;
+ info->var.yres_virtual = params.height;
+ info->var.bits_per_pixel = params.format->bits_per_pixel;
+ info->var.red = params.format->red;
+ info->var.green = params.format->green;
+ info->var.blue = params.format->blue;
+ info->var.transp = params.format->transp;
+
+ info->fbops = &simplefb_ops;
+ info->flags = FBINFO_DEFAULT;
+ info->screen_base = devm_ioremap(&pdev->dev, info->fix.smem_start,
+ info->fix.smem_len);
+ if (!info->screen_base) {
+ framebuffer_release(info);
+ return -ENODEV;
+ }
+ info->pseudo_palette = (void *)(info + 1);
+
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret);
+ framebuffer_release(info);
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node);
+
+ return 0;
+}
+
+static int simplefb_remove(struct platform_device *pdev)
+{
+ struct fb_info *info = platform_get_drvdata(pdev);
+
+ unregister_framebuffer(info);
+ framebuffer_release(info);
+
+ return 0;
+}
+
+static const struct of_device_id simplefb_of_match[] = {
+ { .compatible = "simple-framebuffer", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, simplefb_of_match);
+
+static struct platform_driver simplefb_driver = {
+ .driver = {
+ .name = "simple-framebuffer",
+ .owner = THIS_MODULE,
+ .of_match_table = simplefb_of_match,
+ },
+ .probe = simplefb_probe,
+ .remove = simplefb_remove,
+};
+module_platform_driver(simplefb_driver);
+
+MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>");
+MODULE_DESCRIPTION("Simple framebuffer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/fs/aio.c b/fs/aio.c
index c5b1a8c..7fe5bde 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -307,7 +307,9 @@
kunmap_atomic(ring);
while (atomic_read(&ctx->reqs_active) > 0) {
- wait_event(ctx->wait, head != ctx->tail);
+ wait_event(ctx->wait,
+ head != ctx->tail ||
+ atomic_read(&ctx->reqs_active) <= 0);
avail = (head <= ctx->tail ? ctx->tail : ctx->nr_events) - head;
@@ -1299,8 +1301,7 @@
* < min_nr if the timeout specified by timeout has elapsed
* before sufficient events are available, where timeout == NULL
* specifies an infinite timeout. Note that the timeout pointed to by
- * timeout is relative and will be updated if not NULL and the
- * operation blocks. Will fail with -ENOSYS if not implemented.
+ * timeout is relative. Will fail with -ENOSYS if not implemented.
*/
SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id,
long, min_nr,
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fc30251..20efd81 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -171,7 +171,8 @@
if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL)
inode->i_flags |= S_AUTOMOUNT;
- cifs_set_ops(inode);
+ if (inode->i_state & I_NEW)
+ cifs_set_ops(inode);
}
void
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index dfce656..5d4513c 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -1229,6 +1229,19 @@
return 0;
}
+static unsigned long calc_fat_clusters(struct super_block *sb)
+{
+ struct msdos_sb_info *sbi = MSDOS_SB(sb);
+
+ /* Divide first to avoid overflow */
+ if (sbi->fat_bits != 12) {
+ unsigned long ent_per_sec = sb->s_blocksize * 8 / sbi->fat_bits;
+ return ent_per_sec * sbi->fat_length;
+ }
+
+ return sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits;
+}
+
/*
* Read the super block of an MS-DOS FS.
*/
@@ -1434,7 +1447,7 @@
sbi->dirty = b->fat16.state & FAT_STATE_DIRTY;
/* check that FAT table does not overflow */
- fat_clusters = sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits;
+ fat_clusters = calc_fat_clusters(sb);
total_clusters = min(total_clusters, fat_clusters - FAT_START_ENT);
if (total_clusters > MAX_FAT(sb)) {
if (!silent)
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index eb08c9e..5a376ab 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -26,7 +26,7 @@
config GFS2_FS_LOCKING_DLM
bool "GFS2 DLM locking"
depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \
- HOTPLUG && DLM && CONFIGFS_FS && SYSFS
+ HOTPLUG && CONFIGFS_FS && SYSFS && (DLM=y || DLM=GFS2_FS)
help
Multiple node locking module for GFS2
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index c5fa758..68b4c8f 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -212,7 +212,7 @@
fs_err(sdp, "Error %d writing to log\n", error);
}
- bio_for_each_segment(bvec, bio, i) {
+ bio_for_each_segment_all(bvec, bio, i) {
page = bvec->bv_page;
if (page_has_buffers(page))
gfs2_end_log_write_bh(sdp, bvec, error);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index c7c840e..c253b13 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -121,7 +121,7 @@
{
struct kqid qid = qd->qd_id;
return (2 * (u64)from_kqid(&init_user_ns, qid)) +
- (qid.type == USRQUOTA) ? 0 : 1;
+ ((qid.type == USRQUOTA) ? 0 : 1);
}
static u64 qd2offset(struct gfs2_quota_data *qd)
@@ -721,7 +721,7 @@
goto unlock_out;
}
- gfs2_trans_add_meta(ip->i_gl, bh);
+ gfs2_trans_add_data(ip->i_gl, bh);
kaddr = kmap_atomic(page);
if (offset + sizeof(struct gfs2_quota) > PAGE_CACHE_SIZE)
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 0c5a575..5232525 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1401,9 +1401,14 @@
u32 extlen;
u32 free_blocks = rgd->rd_free_clone - rgd->rd_reserved;
int ret;
+ struct inode *inode = &ip->i_inode;
- extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested);
- extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks);
+ if (S_ISDIR(inode->i_mode))
+ extlen = 1;
+ else {
+ extlen = max_t(u32, atomic_read(&rs->rs_sizehint), requested);
+ extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks);
+ }
if ((rgd->rd_free_clone < rgd->rd_reserved) || (free_blocks < extlen))
return;
diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c
index f3b1a15..d3fa6bd 100644
--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -415,7 +415,11 @@
spin_lock(&tree->hash_lock);
node = hfs_bnode_findhash(tree, num);
spin_unlock(&tree->hash_lock);
- BUG_ON(node);
+ if (node) {
+ pr_crit("new node %u already hashed?\n", num);
+ WARN_ON(1);
+ return node;
+ }
node = __hfs_bnode_create(tree, num);
if (!node)
return ERR_PTR(-ENOMEM);
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 689fb60..bccfec8 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -219,13 +219,32 @@
static int nilfs_set_page_dirty(struct page *page)
{
- int ret = __set_page_dirty_buffers(page);
+ int ret = __set_page_dirty_nobuffers(page);
- if (ret) {
+ if (page_has_buffers(page)) {
struct inode *inode = page->mapping->host;
- unsigned nr_dirty = 1 << (PAGE_SHIFT - inode->i_blkbits);
+ unsigned nr_dirty = 0;
+ struct buffer_head *bh, *head;
- nilfs_set_file_dirty(inode, nr_dirty);
+ /*
+ * This page is locked by callers, and no other thread
+ * concurrently marks its buffers dirty since they are
+ * only dirtied through routines in fs/buffer.c in
+ * which call sites of mark_buffer_dirty are protected
+ * by page lock.
+ */
+ bh = head = page_buffers(page);
+ do {
+ /* Do not mark hole blocks dirty */
+ if (buffer_dirty(bh) || !buffer_mapped(bh))
+ continue;
+
+ set_buffer_dirty(bh);
+ nr_dirty++;
+ } while (bh = bh->b_this_page, bh != head);
+
+ if (nr_dirty)
+ nilfs_set_file_dirty(inode, nr_dirty);
}
return ret;
}
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 1c39efb..2487116 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -790,7 +790,7 @@
&hole_size, &rec, &is_last);
if (ret) {
mlog_errno(ret);
- goto out;
+ goto out_unlock;
}
if (rec.e_blkno == 0ULL) {
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8a7509f..ff54014 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2288,7 +2288,7 @@
ret = ocfs2_inode_lock(inode, NULL, 1);
if (ret < 0) {
mlog_errno(ret);
- goto out_sems;
+ goto out;
}
ocfs2_inode_unlock(inode, 1);
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index c2af598..bb1bc48 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -152,6 +152,12 @@
{0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h
index d09deab..fb02980 100644
--- a/include/linux/acpi_dma.h
+++ b/include/linux/acpi_dma.h
@@ -37,6 +37,8 @@
* @dev: struct device of this controller
* @acpi_dma_xlate: callback function to find a suitable channel
* @data: private data used by a callback function
+ * @base_request_line: first supported request line (CSRT)
+ * @end_request_line: last supported request line (CSRT)
*/
struct acpi_dma {
struct list_head dma_controllers;
@@ -44,6 +46,8 @@
struct dma_chan *(*acpi_dma_xlate)
(struct acpi_dma_spec *, struct acpi_dma *);
void *data;
+ unsigned short base_request_line;
+ unsigned short end_request_line;
};
/* Used with acpi_dma_simple_xlate() */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index f14a98a..2e34db8 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -134,7 +134,10 @@
#define BCMA_CORE_I2S 0x834
#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
-#define BCMA_CORE_ARM_CR4 0x83e
+#define BCMA_CORE_PHY_AC 0x83B
+#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
+#define BCMA_CORE_USB30_DEV 0x83D
+#define BCMA_CORE_ARM_CR4 0x83E
#define BCMA_CORE_DEFAULT 0xFFF
#define BCMA_MAX_NR_CORES 16
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index b840a49..677b4f0 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -1,3 +1,6 @@
+#ifndef _LINUX_BRCMPHY_H
+#define _LINUX_BRCMPHY_H
+
#define PHY_ID_BCM50610 0x0143bd60
#define PHY_ID_BCM50610M 0x0143bd70
#define PHY_ID_BCM5241 0x0143bc30
@@ -29,3 +32,5 @@
#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000
#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000
#define PHY_BCM_FLAGS_VALID 0x80000000
+
+#endif /* _LINUX_BRCMPHY_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e96329c..e9ef6d6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -562,6 +562,9 @@
extern __printf(2, 3)
int __trace_printk(unsigned long ip, const char *fmt, ...);
+extern int __trace_bputs(unsigned long ip, const char *str);
+extern int __trace_puts(unsigned long ip, const char *str, int size);
+
/**
* trace_puts - write a string into the ftrace buffer
* @str: the string to record
@@ -587,8 +590,6 @@
* (1 when __trace_bputs is used, strlen(str) when __trace_puts is used)
*/
-extern int __trace_bputs(unsigned long ip, const char *str);
-extern int __trace_puts(unsigned long ip, const char *str, int size);
#define trace_puts(str) ({ \
static const char *trace_printk_fmt \
__attribute__((section("__trace_printk_fmt"))) = \
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index fb1bf7d..0390d59 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -373,13 +373,11 @@
/**
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
- * @pm_power_off: Should machine pm power off hook be registered or not
* @init: board-specific initialization after detection of ab8500
* @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
int irq_base;
- bool pm_power_off;
void (*init) (struct ab8500 *);
struct ab8500_regulator_platform_data *regulator;
struct abx500_gpio_platform_data *gpio;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a94a5a0..60584b1 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2733,6 +2733,17 @@
}
netdev_features_t netdev_increment_features(netdev_features_t all,
netdev_features_t one, netdev_features_t mask);
+
+/* Allow TSO being used on stacked device :
+ * Performing the GSO segmentation before last device
+ * is a performance improvement.
+ */
+static inline netdev_features_t netdev_add_tso_features(netdev_features_t features,
+ netdev_features_t mask)
+{
+ return netdev_increment_features(features, NETIF_F_ALL_TSO, mask);
+}
+
int __netdev_update_features(struct net_device *dev);
void netdev_update_features(struct net_device *dev);
void netdev_change_features(struct net_device *dev);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 81b3161..1704479 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -60,11 +60,13 @@
void acpiphp_init(void);
void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle);
void acpiphp_remove_slots(struct pci_bus *bus);
+void acpiphp_check_host_bridge(acpi_handle handle);
#else
static inline void acpiphp_init(void) { }
static inline void acpiphp_enumerate_slots(struct pci_bus *bus,
acpi_handle handle) { }
static inline void acpiphp_remove_slots(struct pci_bus *bus) { }
+static inline void acpiphp_check_host_bridge(acpi_handle handle) { }
#endif
#else /* CONFIG_ACPI */
diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h
index 528e73c..2390199 100644
--- a/include/linux/platform_data/clk-lpss.h
+++ b/include/linux/platform_data/clk-lpss.h
@@ -13,6 +13,11 @@
#ifndef __CLK_LPSS_H
#define __CLK_LPSS_H
+struct lpss_clk_data {
+ const char *name;
+ struct clk *clk;
+};
+
extern int lpt_clk_init(void);
#endif /* __CLK_LPSS_H */
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index ff9b0aa..c860c1b 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -43,8 +43,6 @@
int DTR_present;
int (*get_context_loss_count)(struct device *);
- void (*set_forceidle)(struct device *);
- void (*set_noidle)(struct device *);
void (*enable_wakeup)(struct device *, bool);
};
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 6af944a..22c7052 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -4,6 +4,7 @@
#include <stdarg.h>
#include <linux/init.h>
#include <linux/kern_levels.h>
+#include <linux/linkage.h>
extern const char linux_banner[];
extern const char linux_proc_banner[];
diff --git a/include/linux/rio.h b/include/linux/rio.h
index a3e7842..18e0993 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -83,7 +83,6 @@
extern struct bus_type rio_bus_type;
extern struct device rio_bus;
-extern struct list_head rio_devices; /* list of all devices */
struct rio_mport;
struct rio_dev;
@@ -237,6 +236,7 @@
* @name: Port name string
* @priv: Master port private data
* @dma: DMA device associated with mport
+ * @nscan: RapidIO network enumeration/discovery operations
*/
struct rio_mport {
struct list_head dbells; /* list of doorbell events */
@@ -262,8 +262,14 @@
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
struct dma_device dma;
#endif
+ struct rio_scan *nscan;
};
+/*
+ * Enumeration/discovery control flags
+ */
+#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */
+
struct rio_id_table {
u16 start; /* logical minimal id */
u32 max; /* max number of IDs in table */
@@ -460,6 +466,16 @@
}
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+/**
+ * struct rio_scan - RIO enumeration and discovery operations
+ * @enumerate: Callback to perform RapidIO fabric enumeration.
+ * @discover: Callback to perform RapidIO fabric discovery.
+ */
+struct rio_scan {
+ int (*enumerate)(struct rio_mport *mport, u32 flags);
+ int (*discover)(struct rio_mport *mport, u32 flags);
+};
+
/* Architecture and hardware-specific functions */
extern int rio_register_mport(struct rio_mport *);
extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index b75c059..5059994 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -433,5 +433,6 @@
extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
struct rio_dev *from);
+extern int rio_init_mports(void);
#endif /* LINUX_RIO_DRV_H */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 428c37a..33bf2df 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -305,7 +305,6 @@
extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
-extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
int offset, int len);
extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
@@ -314,7 +313,6 @@
unsigned int len, __wsum *csump);
extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode);
-extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
int offset, int len);
extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 629aaf5..c55ce24 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -35,4 +35,7 @@
}
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+
+int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
+int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len);
#endif
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index c454a88..f1b0dca 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -563,9 +563,8 @@
}
/**
- * gadget_is_superspeed() - return true if the hardware handles
- * supperspeed
- * @g: controller that might support supper speed
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
*/
static inline int gadget_is_superspeed(struct usb_gadget *g)
{
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b9b0f7b4..302ddf5 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -268,6 +268,8 @@
struct usb_serial_port *port, struct ktermios *old);
void (*break_ctl)(struct tty_struct *tty, int break_state);
int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+ bool (*tx_empty)(struct usb_serial_port *port);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
int (*tiocmget)(struct tty_struct *tty);
@@ -327,6 +329,8 @@
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+ long timeout);
extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index e8d6571..0d33fca 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -36,7 +36,7 @@
int vc_allocate(unsigned int console);
int vc_cons_allocated(unsigned int console);
int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-void vc_deallocate(unsigned int console);
+struct vc_data *vc_deallocate(unsigned int console);
void reset_palette(struct vc_data *vc);
void do_blank_screen(int entering_gfx);
void do_unblank_screen(int leaving_gfx);
diff --git a/include/linux/wait.h b/include/linux/wait.h
index ac38be2..1133695 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -217,6 +217,8 @@
if (!ret) \
break; \
} \
+ if (!ret && (condition)) \
+ ret = 1; \
finish_wait(&wq, &__wait); \
} while (0)
@@ -233,8 +235,9 @@
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
- * The function returns 0 if the @timeout elapsed, and the remaining
- * jiffies if the condition evaluated to true before the timeout elapsed.
+ * The function returns 0 if the @timeout elapsed, or the remaining
+ * jiffies (at least 1) if the @condition evaluated to %true before
+ * the @timeout elapsed.
*/
#define wait_event_timeout(wq, condition, timeout) \
({ \
@@ -302,6 +305,8 @@
ret = -ERESTARTSYS; \
break; \
} \
+ if (!ret && (condition)) \
+ ret = 1; \
finish_wait(&wq, &__wait); \
} while (0)
@@ -318,9 +323,10 @@
* wake_up() has to be called after changing any variable that could
* change the result of the wait condition.
*
- * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
- * was interrupted by a signal, and the remaining jiffies otherwise
- * if the condition evaluated to true before the timeout elapsed.
+ * Returns:
+ * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by
+ * a signal, or the remaining jiffies (at least 1) if the @condition
+ * evaluated to %true before the @timeout elapsed.
*/
#define wait_event_interruptible_timeout(wq, condition, timeout) \
({ \
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 04c2d46..885898a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3043,7 +3043,8 @@
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls to
* this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
- * mixed for a single hardware.
+ * mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
*
* In process context use instead ieee80211_rx_ni().
*
@@ -3059,7 +3060,8 @@
* (internally defers to a tasklet.)
*
* Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
- * be mixed for a single hardware.
+ * be mixed for a single hardware.Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
@@ -3073,7 +3075,8 @@
* (internally disables bottom halves).
*
* Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
- * not be mixed for a single hardware.
+ * not be mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
@@ -3196,7 +3199,8 @@
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls
* to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
- * may not be mixed for a single hardware.
+ * may not be mixed for a single hardware. Must not run concurrently with
+ * ieee80211_rx() or ieee80211_rx_ni().
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h
index 31f1fb9..99eac12 100644
--- a/include/net/netfilter/nf_log.h
+++ b/include/net/netfilter/nf_log.h
@@ -30,7 +30,8 @@
} u;
};
-typedef void nf_logfn(u_int8_t pf,
+typedef void nf_logfn(struct net *net,
+ u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h
index e2dec42..5ca3f14 100644
--- a/include/net/netfilter/nfnetlink_log.h
+++ b/include/net/netfilter/nfnetlink_log.h
@@ -2,7 +2,8 @@
#define _KER_NFNETLINK_LOG_H
void
-nfulnl_log_packet(u_int8_t pf,
+nfulnl_log_packet(struct net *net,
+ u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h
index ee13ab6..c312f16 100644
--- a/include/uapi/linux/virtio_console.h
+++ b/include/uapi/linux/virtio_console.h
@@ -39,7 +39,7 @@
#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
-#define VIRTIO_CONSOLE_BAD_ID (~(u32)0)
+#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0)
struct virtio_console_config {
/* colums of the screens */
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 83a2970..6bd4a90 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1021,9 +1021,6 @@
* @seq: netlink audit message sequence (serial) number
* @data: payload data
* @datasz: size of payload data
- * @loginuid: loginuid of sender
- * @sessionid: sessionid for netlink audit message
- * @sid: SE Linux Security ID of sender
*/
int audit_receive_filter(int type, int pid, int seq, void *data, size_t datasz)
{
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 7a0cf68..27963e2 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2072,8 +2072,10 @@
out_reg:
/* Don't let event modules unload while probe registered */
ret = try_module_get(file->event_call->mod);
- if (!ret)
+ if (!ret) {
+ ret = -EBUSY;
goto out_free;
+ }
ret = __ftrace_event_enable_disable(file, 1, 1);
if (ret < 0)
diff --git a/lib/Makefile b/lib/Makefile
index e9c52e1b..c55a037 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -23,7 +23,7 @@
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- gcd.o lcm.o list_sort.o uuid.o flex_array.o \
+ gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o \
bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o
obj-y += string_helpers.o
obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
diff --git a/lib/iovec.c b/lib/iovec.c
new file mode 100644
index 0000000..454baa8
--- /dev/null
+++ b/lib/iovec.c
@@ -0,0 +1,53 @@
+#include <linux/uaccess.h>
+#include <linux/export.h>
+#include <linux/uio.h>
+
+/*
+ * Copy iovec to kernel. Returns -EFAULT on error.
+ *
+ * Note: this modifies the original iovec.
+ */
+
+int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
+{
+ while (len > 0) {
+ if (iov->iov_len) {
+ int copy = min_t(unsigned int, len, iov->iov_len);
+ if (copy_from_user(kdata, iov->iov_base, copy))
+ return -EFAULT;
+ len -= copy;
+ kdata += copy;
+ iov->iov_base += copy;
+ iov->iov_len -= copy;
+ }
+ iov++;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(memcpy_fromiovec);
+
+/*
+ * Copy kernel to iovec. Returns -EFAULT on error.
+ *
+ * Note: this modifies the original iovec.
+ */
+
+int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len)
+{
+ while (len > 0) {
+ if (iov->iov_len) {
+ int copy = min_t(unsigned int, iov->iov_len, len);
+ if (copy_to_user(iov->iov_base, kdata, copy))
+ return -EFAULT;
+ kdata += copy;
+ len -= copy;
+ iov->iov_len -= copy;
+ iov->iov_base += copy;
+ }
+ iov++;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(memcpy_toiovec);
diff --git a/lib/klist.c b/lib/klist.c
index 0874e41..358a368a 100644
--- a/lib/klist.c
+++ b/lib/klist.c
@@ -193,10 +193,10 @@
if (waiter->node != n)
continue;
+ list_del(&waiter->list);
waiter->woken = 1;
mb();
wake_up_process(waiter->process);
- list_del(&waiter->list);
}
spin_unlock(&klist_remove_lock);
knode_set_klist(n, NULL);
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 03a89a2..362c329 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2325,7 +2325,12 @@
pte_unmap(pte);
spin_lock(&mm->page_table_lock);
BUG_ON(!pmd_none(*pmd));
- set_pmd_at(mm, address, pmd, _pmd);
+ /*
+ * We can only use set_pmd_at when establishing
+ * hugepmds and never for establishing regular pmds that
+ * points to regular pagetables. Use pmd_populate for that
+ */
+ pmd_populate(mm, pmd, pmd_pgtable(_pmd));
spin_unlock(&mm->page_table_lock);
anon_vma_unlock_write(vma->anon_vma);
goto out;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index cb1c9de..010d6c1 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4108,8 +4108,6 @@
if (mem_cgroup_disabled())
return NULL;
- VM_BUG_ON(PageSwapCache(page));
-
if (PageTransHuge(page)) {
nr_pages <<= compound_order(page);
VM_BUG_ON(!PageTransHuge(page));
@@ -4205,6 +4203,18 @@
if (page_mapped(page))
return;
VM_BUG_ON(page->mapping && !PageAnon(page));
+ /*
+ * If the page is in swap cache, uncharge should be deferred
+ * to the swap path, which also properly accounts swap usage
+ * and handles memcg lifetime.
+ *
+ * Note that this check is not stable and reclaim may add the
+ * page to swap cache at any time after this. However, if the
+ * page is not in swap cache by the time page->mapcount hits
+ * 0, there won't be any page table references to the swap
+ * slot, and reclaim will free it and not actually write the
+ * page to disk.
+ */
if (PageSwapCache(page))
return;
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_ANON, false);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index a221fac..1ad92b4 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -720,9 +720,12 @@
start = phys_start_pfn << PAGE_SHIFT;
size = nr_pages * PAGE_SIZE;
ret = release_mem_region_adjustable(&iomem_resource, start, size);
- if (ret)
- pr_warn("Unable to release resource <%016llx-%016llx> (%d)\n",
- start, start + size - 1, ret);
+ if (ret) {
+ resource_size_t endres = start + size - 1;
+
+ pr_warn("Unable to release resource <%pa-%pa> (%d)\n",
+ &start, &endres, ret);
+ }
sections_to_remove = nr_pages / PAGES_PER_SECTION;
for (i = 0; i < sections_to_remove; i++) {
diff --git a/mm/migrate.c b/mm/migrate.c
index 27ed225..b1f5750 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -165,7 +165,7 @@
pte = arch_make_huge_pte(pte, vma, new, 0);
}
#endif
- flush_cache_page(vma, addr, pte_pfn(pte));
+ flush_dcache_page(new);
set_pte_at(mm, addr, ptep, pte);
if (PageHuge(new)) {
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
index be04122..6725ff1 100644
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -40,48 +40,44 @@
int id;
/*
- * srcu_read_lock() here will block synchronize_srcu() in
- * mmu_notifier_unregister() until all registered
- * ->release() callouts this function makes have
- * returned.
+ * SRCU here will block mmu_notifier_unregister until
+ * ->release returns.
*/
id = srcu_read_lock(&srcu);
+ hlist_for_each_entry_rcu(mn, &mm->mmu_notifier_mm->list, hlist)
+ /*
+ * If ->release runs before mmu_notifier_unregister it must be
+ * handled, as it's the only way for the driver to flush all
+ * existing sptes and stop the driver from establishing any more
+ * sptes before all the pages in the mm are freed.
+ */
+ if (mn->ops->release)
+ mn->ops->release(mn, mm);
+ srcu_read_unlock(&srcu, id);
+
spin_lock(&mm->mmu_notifier_mm->lock);
while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
mn = hlist_entry(mm->mmu_notifier_mm->list.first,
struct mmu_notifier,
hlist);
-
/*
- * Unlink. This will prevent mmu_notifier_unregister()
- * from also making the ->release() callout.
+ * We arrived before mmu_notifier_unregister so
+ * mmu_notifier_unregister will do nothing other than to wait
+ * for ->release to finish and for mmu_notifier_unregister to
+ * return.
*/
hlist_del_init_rcu(&mn->hlist);
- spin_unlock(&mm->mmu_notifier_mm->lock);
-
- /*
- * Clear sptes. (see 'release' description in mmu_notifier.h)
- */
- if (mn->ops->release)
- mn->ops->release(mn, mm);
-
- spin_lock(&mm->mmu_notifier_mm->lock);
}
spin_unlock(&mm->mmu_notifier_mm->lock);
/*
- * All callouts to ->release() which we have done are complete.
- * Allow synchronize_srcu() in mmu_notifier_unregister() to complete
- */
- srcu_read_unlock(&srcu, id);
-
- /*
- * mmu_notifier_unregister() may have unlinked a notifier and may
- * still be calling out to it. Additionally, other notifiers
- * may have been active via vmtruncate() et. al. Block here
- * to ensure that all notifier callouts for this mm have been
- * completed and the sptes are really cleaned up before returning
- * to exit_mmap().
+ * synchronize_srcu here prevents mmu_notifier_release from returning to
+ * exit_mmap (which would proceed with freeing all pages in the mm)
+ * until the ->release method returns, if it was invoked by
+ * mmu_notifier_unregister.
+ *
+ * The mmu_notifier_mm can't go away from under us because one mm_count
+ * is held by exit_mmap.
*/
synchronize_srcu(&srcu);
}
@@ -292,31 +288,34 @@
{
BUG_ON(atomic_read(&mm->mm_count) <= 0);
- spin_lock(&mm->mmu_notifier_mm->lock);
if (!hlist_unhashed(&mn->hlist)) {
+ /*
+ * SRCU here will force exit_mmap to wait for ->release to
+ * finish before freeing the pages.
+ */
int id;
- /*
- * Ensure we synchronize up with __mmu_notifier_release().
- */
id = srcu_read_lock(&srcu);
-
- hlist_del_rcu(&mn->hlist);
- spin_unlock(&mm->mmu_notifier_mm->lock);
-
+ /*
+ * exit_mmap will block in mmu_notifier_release to guarantee
+ * that ->release is called before freeing the pages.
+ */
if (mn->ops->release)
mn->ops->release(mn, mm);
-
- /*
- * Allow __mmu_notifier_release() to complete.
- */
srcu_read_unlock(&srcu, id);
- } else
+
+ spin_lock(&mm->mmu_notifier_mm->lock);
+ /*
+ * Can not use list_del_rcu() since __mmu_notifier_release
+ * can delete it before we hold the lock.
+ */
+ hlist_del_init_rcu(&mn->hlist);
spin_unlock(&mm->mmu_notifier_mm->lock);
+ }
/*
- * Wait for any running method to finish, including ->release() if it
- * was run by __mmu_notifier_release() instead of us.
+ * Wait for any running method to finish, of course including
+ * ->release if it was run by mmu_notifier_relase instead of us.
*/
synchronize_srcu(&srcu);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 98cbdf6..378a15b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5158,7 +5158,7 @@
for (pages = 0; pos < end; pos += PAGE_SIZE, pages++) {
if (poison)
memset((void *)pos, poison, PAGE_SIZE);
- free_reserved_page(virt_to_page(pos));
+ free_reserved_page(virt_to_page((void *)pos));
}
if (pages && s)
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 35aa294..5da2cbc 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -127,28 +127,7 @@
return 0;
}
-static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk)
-{
- struct vm_area_struct *vma;
-
- /* We don't need vma lookup at all. */
- if (!walk->hugetlb_entry)
- return NULL;
-
- VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem));
- vma = find_vma(walk->mm, addr);
- if (vma && vma->vm_start <= addr && is_vm_hugetlb_page(vma))
- return vma;
-
- return NULL;
-}
-
#else /* CONFIG_HUGETLB_PAGE */
-static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk)
-{
- return NULL;
-}
-
static int walk_hugetlb_range(struct vm_area_struct *vma,
unsigned long addr, unsigned long end,
struct mm_walk *walk)
@@ -198,30 +177,53 @@
if (!walk->mm)
return -EINVAL;
+ VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem));
+
pgd = pgd_offset(walk->mm, addr);
do {
- struct vm_area_struct *vma;
+ struct vm_area_struct *vma = NULL;
next = pgd_addr_end(addr, end);
/*
- * handle hugetlb vma individually because pagetable walk for
- * the hugetlb page is dependent on the architecture and
- * we can't handled it in the same manner as non-huge pages.
+ * This function was not intended to be vma based.
+ * But there are vma special cases to be handled:
+ * - hugetlb vma's
+ * - VM_PFNMAP vma's
*/
- vma = hugetlb_vma(addr, walk);
+ vma = find_vma(walk->mm, addr);
if (vma) {
- if (vma->vm_end < next)
- next = vma->vm_end;
/*
- * Hugepage is very tightly coupled with vma, so
- * walk through hugetlb entries within a given vma.
+ * There are no page structures backing a VM_PFNMAP
+ * range, so do not allow split_huge_page_pmd().
*/
- err = walk_hugetlb_range(vma, addr, next, walk);
- if (err)
- break;
- pgd = pgd_offset(walk->mm, next);
- continue;
+ if ((vma->vm_start <= addr) &&
+ (vma->vm_flags & VM_PFNMAP)) {
+ next = vma->vm_end;
+ pgd = pgd_offset(walk->mm, next);
+ continue;
+ }
+ /*
+ * Handle hugetlb vma individually because pagetable
+ * walk for the hugetlb page is dependent on the
+ * architecture and we can't handled it in the same
+ * manner as non-huge pages.
+ */
+ if (walk->hugetlb_entry && (vma->vm_start <= addr) &&
+ is_vm_hugetlb_page(vma)) {
+ if (vma->vm_end < next)
+ next = vma->vm_end;
+ /*
+ * Hugepage is very tightly coupled with vma,
+ * so walk through hugetlb entries within a
+ * given vma.
+ */
+ err = walk_hugetlb_range(vma, addr, next, walk);
+ if (err)
+ break;
+ pgd = pgd_offset(walk->mm, next);
+ continue;
+ }
}
if (pgd_none_or_clear_bad(pgd)) {
diff --git a/net/802/mrp.c b/net/802/mrp.c
index e085bcc..1eb05d8 100644
--- a/net/802/mrp.c
+++ b/net/802/mrp.c
@@ -871,10 +871,10 @@
*/
del_timer_sync(&app->join_timer);
- spin_lock(&app->lock);
+ spin_lock_bh(&app->lock);
mrp_mad_event(app, MRP_EVENT_TX);
mrp_pdu_queue(app);
- spin_unlock(&app->lock);
+ spin_unlock_bh(&app->lock);
mrp_queue_xmit(app);
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index 1240f07..51aafd6 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -181,6 +181,7 @@
batadv_originator_free(bat_priv);
free_percpu(bat_priv->bat_counters);
+ bat_priv->bat_counters = NULL;
atomic_set(&bat_priv->mesh_state, BATADV_MESH_INACTIVE);
}
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index 2f34525..fad1a20 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -156,12 +156,28 @@
kfree(orig_node);
}
+/**
+ * batadv_orig_node_free_ref - decrement the orig node refcounter and possibly
+ * schedule an rcu callback for freeing it
+ * @orig_node: the orig node to free
+ */
void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node)
{
if (atomic_dec_and_test(&orig_node->refcount))
call_rcu(&orig_node->rcu, batadv_orig_node_free_rcu);
}
+/**
+ * batadv_orig_node_free_ref_now - decrement the orig node refcounter and
+ * possibly free it (without rcu callback)
+ * @orig_node: the orig node to free
+ */
+void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node)
+{
+ if (atomic_dec_and_test(&orig_node->refcount))
+ batadv_orig_node_free_rcu(&orig_node->rcu);
+}
+
void batadv_originator_free(struct batadv_priv *bat_priv)
{
struct batadv_hashtable *hash = bat_priv->orig_hash;
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h
index 7df48fa..734e5a3 100644
--- a/net/batman-adv/originator.h
+++ b/net/batman-adv/originator.h
@@ -26,6 +26,7 @@
void batadv_originator_free(struct batadv_priv *bat_priv);
void batadv_purge_orig_ref(struct batadv_priv *bat_priv);
void batadv_orig_node_free_ref(struct batadv_orig_node *orig_node);
+void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node);
struct batadv_orig_node *batadv_get_orig_node(struct batadv_priv *bat_priv,
const uint8_t *addr);
struct batadv_neigh_node *
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 6f20d33..819dfb0 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -505,6 +505,7 @@
batadv_debugfs_del_meshif(dev);
free_bat_counters:
free_percpu(bat_priv->bat_counters);
+ bat_priv->bat_counters = NULL;
return ret;
}
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 5e89dee..9e87485 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -144,7 +144,12 @@
struct batadv_tt_orig_list_entry *orig_entry;
orig_entry = container_of(rcu, struct batadv_tt_orig_list_entry, rcu);
- batadv_orig_node_free_ref(orig_entry->orig_node);
+
+ /* We are in an rcu callback here, therefore we cannot use
+ * batadv_orig_node_free_ref() and its call_rcu():
+ * An rcu_barrier() wouldn't wait for that to finish
+ */
+ batadv_orig_node_free_ref_now(orig_entry->orig_node);
kfree(orig_entry);
}
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index 9878eb8..19c37a4 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -72,13 +72,12 @@
}
static void
-ebt_log_packet(u_int8_t pf, unsigned int hooknum,
- const struct sk_buff *skb, const struct net_device *in,
- const struct net_device *out, const struct nf_loginfo *loginfo,
- const char *prefix)
+ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
+ const struct sk_buff *skb, const struct net_device *in,
+ const struct net_device *out, const struct nf_loginfo *loginfo,
+ const char *prefix)
{
unsigned int bitmask;
- struct net *net = dev_net(in ? in : out);
/* FIXME: Disabled from containers until syslog ns is supported */
if (!net_eq(net, &init_net))
@@ -191,7 +190,7 @@
nf_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb,
par->in, par->out, &li, "%s", info->prefix);
else
- ebt_log_packet(NFPROTO_BRIDGE, par->hooknum, skb, par->in,
+ ebt_log_packet(net, NFPROTO_BRIDGE, par->hooknum, skb, par->in,
par->out, &li, info->prefix);
return EBT_CONTINUE;
}
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index fc1905c..df0364a 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -131,14 +131,16 @@
return skb;
}
-static void ebt_ulog_packet(unsigned int hooknr, const struct sk_buff *skb,
- const struct net_device *in, const struct net_device *out,
- const struct ebt_ulog_info *uloginfo, const char *prefix)
+static void ebt_ulog_packet(struct net *net, unsigned int hooknr,
+ const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct ebt_ulog_info *uloginfo,
+ const char *prefix)
{
ebt_ulog_packet_msg_t *pm;
size_t size, copy_len;
struct nlmsghdr *nlh;
- struct net *net = dev_net(in ? in : out);
struct ebt_ulog_net *ebt = ebt_ulog_pernet(net);
unsigned int group = uloginfo->nlgroup;
ebt_ulog_buff_t *ub = &ebt->ulog_buffers[group];
@@ -233,7 +235,7 @@
}
/* this function is registered with the netfilter core */
-static void ebt_log_packet(u_int8_t pf, unsigned int hooknum,
+static void ebt_log_packet(struct net *net, u_int8_t pf, unsigned int hooknum,
const struct sk_buff *skb, const struct net_device *in,
const struct net_device *out, const struct nf_loginfo *li,
const char *prefix)
@@ -252,13 +254,15 @@
strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix));
}
- ebt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix);
+ ebt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix);
}
static unsigned int
ebt_ulog_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
- ebt_ulog_packet(par->hooknum, skb, par->in, par->out,
+ struct net *net = dev_net(par->in ? par->in : par->out);
+
+ ebt_ulog_packet(net, par->hooknum, skb, par->in, par->out,
par->targinfo, NULL);
return EBT_CONTINUE;
}
diff --git a/net/core/iovec.c b/net/core/iovec.c
index 7e7aeb0..de178e4 100644
--- a/net/core/iovec.c
+++ b/net/core/iovec.c
@@ -75,31 +75,6 @@
/*
* Copy kernel to iovec. Returns -EFAULT on error.
- *
- * Note: this modifies the original iovec.
- */
-
-int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len)
-{
- while (len > 0) {
- if (iov->iov_len) {
- int copy = min_t(unsigned int, iov->iov_len, len);
- if (copy_to_user(iov->iov_base, kdata, copy))
- return -EFAULT;
- kdata += copy;
- len -= copy;
- iov->iov_len -= copy;
- iov->iov_base += copy;
- }
- iov++;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(memcpy_toiovec);
-
-/*
- * Copy kernel to iovec. Returns -EFAULT on error.
*/
int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
@@ -125,31 +100,6 @@
EXPORT_SYMBOL(memcpy_toiovecend);
/*
- * Copy iovec to kernel. Returns -EFAULT on error.
- *
- * Note: this modifies the original iovec.
- */
-
-int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
-{
- while (len > 0) {
- if (iov->iov_len) {
- int copy = min_t(unsigned int, len, iov->iov_len);
- if (copy_from_user(kdata, iov->iov_base, copy))
- return -EFAULT;
- len -= copy;
- kdata += copy;
- iov->iov_base += copy;
- iov->iov_len -= copy;
- }
- iov++;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(memcpy_fromiovec);
-
-/*
* Copy iovec from kernel. Returns -EFAULT on error.
*/
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index c625e4d..2a83591 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -235,7 +235,7 @@
*/
struct net *net = dev_net(skb->dev);
struct ip_tunnel_net *itn;
- const struct iphdr *iph = (const struct iphdr *)skb->data;
+ const struct iphdr *iph;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct ip_tunnel *t;
@@ -281,6 +281,7 @@
else
itn = net_generic(net, ipgre_net_id);
+ iph = (const struct iphdr *)skb->data;
t = ip_tunnel_lookup(itn, skb->dev->ifindex, tpi.flags,
iph->daddr, iph->saddr, tpi.key);
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index f8a222cb..cf08218 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -162,7 +162,8 @@
return skb;
}
-static void ipt_ulog_packet(unsigned int hooknum,
+static void ipt_ulog_packet(struct net *net,
+ unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
@@ -174,7 +175,6 @@
size_t size, copy_len;
struct nlmsghdr *nlh;
struct timeval tv;
- struct net *net = dev_net(in ? in : out);
struct ulog_net *ulog = ulog_pernet(net);
/* ffs == find first bit set, necessary because userspace
@@ -291,12 +291,15 @@
static unsigned int
ulog_tg(struct sk_buff *skb, const struct xt_action_param *par)
{
- ipt_ulog_packet(par->hooknum, skb, par->in, par->out,
+ struct net *net = dev_net(par->in ? par->in : par->out);
+
+ ipt_ulog_packet(net, par->hooknum, skb, par->in, par->out,
par->targinfo, NULL);
return XT_CONTINUE;
}
-static void ipt_logfn(u_int8_t pf,
+static void ipt_logfn(struct net *net,
+ u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
@@ -318,7 +321,7 @@
strlcpy(loginfo.prefix, prefix, sizeof(loginfo.prefix));
}
- ipt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix);
+ ipt_ulog_packet(net, hooknum, skb, in, out, &loginfo, prefix);
}
static int ulog_tg_check(const struct xt_tgchk_param *par)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index dcb116d..ab450c0 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2887,6 +2887,7 @@
unsigned int mss;
struct sk_buff *gso_skb = skb;
__sum16 newcheck;
+ bool ooo_okay, copy_destructor;
if (!pskb_may_pull(skb, sizeof(*th)))
goto out;
@@ -2927,10 +2928,18 @@
goto out;
}
+ copy_destructor = gso_skb->destructor == tcp_wfree;
+ ooo_okay = gso_skb->ooo_okay;
+ /* All segments but the first should have ooo_okay cleared */
+ skb->ooo_okay = 0;
+
segs = skb_segment(skb, features);
if (IS_ERR(segs))
goto out;
+ /* Only first segment might have ooo_okay set */
+ segs->ooo_okay = ooo_okay;
+
delta = htonl(oldlen + (thlen + mss));
skb = segs;
@@ -2950,6 +2959,17 @@
thlen, skb->csum));
seq += mss;
+ if (copy_destructor) {
+ skb->destructor = gso_skb->destructor;
+ skb->sk = gso_skb->sk;
+ /* {tcp|sock}_wfree() use exact truesize accounting :
+ * sum(skb->truesize) MUST be exactly be gso_skb->truesize
+ * So we account mss bytes of 'true size' for each segment.
+ * The last segment will contain the remaining.
+ */
+ skb->truesize = mss;
+ gso_skb->truesize -= mss;
+ }
skb = skb->next;
th = tcp_hdr(skb);
@@ -2962,7 +2982,7 @@
* is freed at TX completion, and not right now when gso_skb
* is freed by GSO engine
*/
- if (gso_skb->destructor == tcp_wfree) {
+ if (copy_destructor) {
swap(gso_skb->sk, skb->sk);
swap(gso_skb->destructor, skb->destructor);
swap(gso_skb->truesize, skb->truesize);
@@ -3269,8 +3289,11 @@
for (i = 0; i < shi->nr_frags; ++i) {
const struct skb_frag_struct *f = &shi->frags[i];
- struct page *page = skb_frag_page(f);
- sg_set_page(&sg, page, skb_frag_size(f), f->page_offset);
+ unsigned int offset = f->page_offset;
+ struct page *page = skb_frag_page(f) + (offset >> PAGE_SHIFT);
+
+ sg_set_page(&sg, page, skb_frag_size(f),
+ offset_in_page(offset));
if (crypto_hash_update(desc, &sg, skb_frag_size(f)))
return 1;
}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 08bbe60..9c62257 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2743,8 +2743,8 @@
* tcp_xmit_retransmit_queue().
*/
static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked,
- int prior_sacked, bool is_dupack,
- int flag)
+ int prior_sacked, int prior_packets,
+ bool is_dupack, int flag)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
@@ -2804,7 +2804,8 @@
tcp_add_reno_sack(sk);
} else
do_lost = tcp_try_undo_partial(sk, pkts_acked);
- newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked;
+ newly_acked_sacked = prior_packets - tp->packets_out +
+ tp->sacked_out - prior_sacked;
break;
case TCP_CA_Loss:
tcp_process_loss(sk, flag, is_dupack);
@@ -2818,7 +2819,8 @@
if (is_dupack)
tcp_add_reno_sack(sk);
}
- newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked;
+ newly_acked_sacked = prior_packets - tp->packets_out +
+ tp->sacked_out - prior_sacked;
if (icsk->icsk_ca_state <= TCP_CA_Disorder)
tcp_try_undo_dsack(sk);
@@ -3330,9 +3332,10 @@
bool is_dupack = false;
u32 prior_in_flight;
u32 prior_fackets;
- int prior_packets;
+ int prior_packets = tp->packets_out;
int prior_sacked = tp->sacked_out;
int pkts_acked = 0;
+ int previous_packets_out = 0;
/* If the ack is older than previous acks
* then we can probably ignore it.
@@ -3403,14 +3406,14 @@
sk->sk_err_soft = 0;
icsk->icsk_probes_out = 0;
tp->rcv_tstamp = tcp_time_stamp;
- prior_packets = tp->packets_out;
if (!prior_packets)
goto no_queue;
/* See if we can take anything off of the retransmit queue. */
+ previous_packets_out = tp->packets_out;
flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una);
- pkts_acked = prior_packets - tp->packets_out;
+ pkts_acked = previous_packets_out - tp->packets_out;
if (tcp_ack_is_dubious(sk, flag)) {
/* Advance CWND, if state allows this. */
@@ -3418,7 +3421,7 @@
tcp_cong_avoid(sk, ack, prior_in_flight);
is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP));
tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
- is_dupack, flag);
+ prior_packets, is_dupack, flag);
} else {
if (flag & FLAG_DATA_ACKED)
tcp_cong_avoid(sk, ack, prior_in_flight);
@@ -3441,7 +3444,7 @@
/* If data was DSACKed, see if we can undo a cwnd reduction. */
if (flag & FLAG_DSACKING_ACK)
tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
- is_dupack, flag);
+ prior_packets, is_dupack, flag);
/* If this ack opens up a zero window, clear backoff. It was
* being used to time the probes, and is probably far higher than
* it needs to be for normal retransmission.
@@ -3464,7 +3467,7 @@
if (TCP_SKB_CB(skb)->sacked) {
flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una);
tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
- is_dupack, flag);
+ prior_packets, is_dupack, flag);
}
SOCK_DEBUG(sk, "Ack %u before %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 536d409..ec335fa 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -874,11 +874,13 @@
&md5);
tcp_header_size = tcp_options_size + sizeof(struct tcphdr);
- if (tcp_packets_in_flight(tp) == 0) {
+ if (tcp_packets_in_flight(tp) == 0)
tcp_ca_event(sk, CA_EVENT_TX_START);
- skb->ooo_okay = 1;
- } else
- skb->ooo_okay = 0;
+
+ /* if no packet is in qdisc/device queue, then allow XPS to select
+ * another queue.
+ */
+ skb->ooo_okay = sk_wmem_alloc_get(sk) == 0;
skb_push(skb, tcp_header_size);
skb_reset_transport_header(skb);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index d2eedf1..dae1949 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1147,7 +1147,7 @@
if (WARN_ON(np->cork.opt))
return -EINVAL;
- np->cork.opt = kmalloc(opt->tot_len, sk->sk_allocation);
+ np->cork.opt = kzalloc(opt->tot_len, sk->sk_allocation);
if (unlikely(np->cork.opt == NULL))
return -ENOBUFS;
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
index 8c00416..9ea0c93 100644
--- a/net/irda/irlap_frame.c
+++ b/net/irda/irlap_frame.c
@@ -544,7 +544,7 @@
/*
* We now have some discovery info to deliver!
*/
- discovery = kmalloc(sizeof(discovery_t), GFP_ATOMIC);
+ discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC);
if (!discovery) {
IRDA_WARNING("%s: unable to malloc!\n", __func__);
return;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 158e6eb..44be28c 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1267,6 +1267,7 @@
void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata);
void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
__le16 fc, bool acked);
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata);
/* IBSS code */
void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 29620bfc..a46e490 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1015,7 +1015,8 @@
static void
ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
- u64 timestamp, struct ieee802_11_elems *elems)
+ u64 timestamp, struct ieee802_11_elems *elems,
+ bool beacon)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1032,6 +1033,7 @@
struct cfg80211_chan_def new_vht_chandef = {};
const struct ieee80211_sec_chan_offs_ie *sec_chan_offs;
const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie;
+ const struct ieee80211_ht_operation *ht_oper;
int secondary_channel_offset = -1;
ASSERT_MGD_MTX(ifmgd);
@@ -1048,11 +1050,14 @@
sec_chan_offs = elems->sec_chan_offs;
wide_bw_chansw_ie = elems->wide_bw_chansw_ie;
+ ht_oper = elems->ht_operation;
if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
IEEE80211_STA_DISABLE_40MHZ)) {
sec_chan_offs = NULL;
wide_bw_chansw_ie = NULL;
+ /* only used for bandwidth here */
+ ht_oper = NULL;
}
if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
@@ -1094,10 +1099,20 @@
return;
}
- if (sec_chan_offs) {
+ if (!beacon && sec_chan_offs) {
secondary_channel_offset = sec_chan_offs->sec_chan_offs;
+ } else if (beacon && ht_oper) {
+ secondary_channel_offset =
+ ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
} else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
- /* if HT is enabled and the IE not present, it's still HT */
+ /*
+ * If it's not a beacon, HT is enabled and the IE not present,
+ * it's 20 MHz, 802.11-2012 8.5.2.6:
+ * This element [the Secondary Channel Offset Element] is
+ * present when switching to a 40 MHz channel. It may be
+ * present when switching to a 20 MHz channel (in which
+ * case the secondary channel offset is set to SCN).
+ */
secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
}
@@ -2796,7 +2811,8 @@
mutex_unlock(&local->iflist_mtx);
}
- ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, elems);
+ ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
+ elems, true);
}
@@ -3210,7 +3226,7 @@
ieee80211_sta_process_chanswitch(sdata,
rx_status->mactime,
- &elems);
+ &elems, false);
} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
ies_len = skb->len -
offsetof(struct ieee80211_mgmt,
@@ -3232,7 +3248,7 @@
ieee80211_sta_process_chanswitch(sdata,
rx_status->mactime,
- &elems);
+ &elems, false);
}
break;
}
@@ -3623,6 +3639,31 @@
}
}
+#ifdef CONFIG_PM
+void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+ mutex_lock(&ifmgd->mtx);
+ if (!ifmgd->associated) {
+ mutex_unlock(&ifmgd->mtx);
+ return;
+ }
+
+ if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
+ sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
+ mlme_dbg(sdata, "driver requested disconnect after resume\n");
+ ieee80211_sta_connection_lost(sdata,
+ ifmgd->associated->bssid,
+ WLAN_REASON_UNSPECIFIED,
+ true);
+ mutex_unlock(&ifmgd->mtx);
+ return;
+ }
+ mutex_unlock(&ifmgd->mtx);
+}
+#endif
+
/* interface setup */
void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
{
@@ -4329,7 +4370,7 @@
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
bool tx = !req->local_state_change;
- bool sent_frame = false;
+ bool report_frame = false;
mutex_lock(&ifmgd->mtx);
@@ -4346,7 +4387,7 @@
ieee80211_destroy_auth_data(sdata, false);
mutex_unlock(&ifmgd->mtx);
- sent_frame = tx;
+ report_frame = true;
goto out;
}
@@ -4354,12 +4395,12 @@
ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
req->reason_code, tx, frame_buf);
- sent_frame = tx;
+ report_frame = true;
}
mutex_unlock(&ifmgd->mtx);
out:
- if (sent_frame)
+ if (report_frame)
__cfg80211_send_deauth(sdata->dev, frame_buf,
IEEE80211_DEAUTH_FRAME_LEN);
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 0d51877..d3f414f 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -688,8 +688,15 @@
struct ieee80211_sta *pubsta,
struct ieee80211_sta_rates *rates)
{
- struct ieee80211_sta_rates *old = rcu_dereference(pubsta->rates);
+ struct ieee80211_sta_rates *old;
+ /*
+ * mac80211 guarantees that this function will not be called
+ * concurrently, so the following RCU access is safe, even without
+ * extra locking. This can not be checked easily, so we just set
+ * the condition to true.
+ */
+ old = rcu_dereference_protected(pubsta->rates, true);
rcu_assign_pointer(pubsta->rates, rates);
if (old)
kfree_rcu(old, rcu_head);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c8447af..8e29526 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3036,6 +3036,9 @@
* and location updates. Note that mac80211
* itself never looks at these frames.
*/
+ if (!multicast &&
+ !ether_addr_equal(sdata->vif.addr, hdr->addr1))
+ return 0;
if (ieee80211_is_public_action(hdr, skb->len))
return 1;
if (!ieee80211_is_beacon(hdr->frame_control))
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 3ed801d..124b1fd 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -208,10 +208,10 @@
u32 iv32 = get_unaligned_le32(&data[4]);
u16 iv16 = data[2] | (data[0] << 8);
- spin_lock_bh(&key->u.tkip.txlock);
+ spin_lock(&key->u.tkip.txlock);
ieee80211_compute_tkip_p1k(key, iv32);
tkip_mixing_phase2(tk, ctx, iv16, p2k);
- spin_unlock_bh(&key->u.tkip.txlock);
+ spin_unlock(&key->u.tkip.txlock);
}
EXPORT_SYMBOL(ieee80211_get_tkip_p2k);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 3f87fa4..27e0715 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1740,6 +1740,13 @@
mb();
local->resuming = false;
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ ieee80211_sta_restart(sdata);
+ }
+
mod_timer(&local->sta_cleanup, jiffies + 1);
#else
WARN_ON(1);
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index 388656d..3b18dd1 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -148,7 +148,7 @@
va_start(args, fmt);
vsnprintf(prefix, sizeof(prefix), fmt, args);
va_end(args);
- logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix);
+ logger->logfn(net, pf, hooknum, skb, in, out, loginfo, prefix);
}
rcu_read_unlock();
}
@@ -368,17 +368,20 @@
return 0;
out_sysctl:
+#ifdef CONFIG_PROC_FS
/* For init_net: errors will trigger panic, don't unroll on error. */
if (!net_eq(net, &init_net))
remove_proc_entry("nf_log", net->nf.proc_netfilter);
-
+#endif
return ret;
}
static void __net_exit nf_log_net_exit(struct net *net)
{
netfilter_log_sysctl_exit(net);
+#ifdef CONFIG_PROC_FS
remove_proc_entry("nf_log", net->nf.proc_netfilter);
+#endif
}
static struct pernet_operations nf_log_net_ops = {
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index faf1e93..962e979 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -602,7 +602,8 @@
/* log handler for internal netfilter logging api */
void
-nfulnl_log_packet(u_int8_t pf,
+nfulnl_log_packet(struct net *net,
+ u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
@@ -615,7 +616,6 @@
const struct nf_loginfo *li;
unsigned int qthreshold;
unsigned int plen;
- struct net *net = dev_net(in ? in : out);
struct nfnl_log_net *log = nfnl_log_pernet(net);
if (li_user && li_user->type == NF_LOG_TYPE_ULOG)
@@ -1045,7 +1045,9 @@
static void __net_exit nfnl_log_net_exit(struct net *net)
{
+#ifdef CONFIG_PROC_FS
remove_proc_entry("nfnetlink_log", net->nf.proc_netfilter);
+#endif
}
static struct pernet_operations nfnl_log_net_ops = {
diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c
index 2e0e835..4e27fa0 100644
--- a/net/netfilter/nfnetlink_queue_core.c
+++ b/net/netfilter/nfnetlink_queue_core.c
@@ -1285,7 +1285,9 @@
static void __net_exit nfnl_queue_net_exit(struct net *net)
{
+#ifdef CONFIG_PROC_FS
remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter);
+#endif
}
static struct pernet_operations nfnl_queue_net_ops = {
diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c
index fe573f6..491c7d8 100644
--- a/net/netfilter/xt_LOG.c
+++ b/net/netfilter/xt_LOG.c
@@ -466,7 +466,8 @@
static void
-ipt_log_packet(u_int8_t pf,
+ipt_log_packet(struct net *net,
+ u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
@@ -475,7 +476,6 @@
const char *prefix)
{
struct sbuff *m;
- struct net *net = dev_net(in ? in : out);
/* FIXME: Disabled from containers until syslog ns is supported */
if (!net_eq(net, &init_net))
@@ -797,7 +797,8 @@
}
static void
-ip6t_log_packet(u_int8_t pf,
+ip6t_log_packet(struct net *net,
+ u_int8_t pf,
unsigned int hooknum,
const struct sk_buff *skb,
const struct net_device *in,
@@ -806,7 +807,6 @@
const char *prefix)
{
struct sbuff *m;
- struct net *net = dev_net(in ? in : out);
/* FIXME: Disabled from containers until syslog ns is supported */
if (!net_eq(net, &init_net))
@@ -833,17 +833,18 @@
{
const struct xt_log_info *loginfo = par->targinfo;
struct nf_loginfo li;
+ struct net *net = dev_net(par->in ? par->in : par->out);
li.type = NF_LOG_TYPE_LOG;
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
if (par->family == NFPROTO_IPV4)
- ipt_log_packet(NFPROTO_IPV4, par->hooknum, skb, par->in,
+ ipt_log_packet(net, NFPROTO_IPV4, par->hooknum, skb, par->in,
par->out, &li, loginfo->prefix);
#if IS_ENABLED(CONFIG_IP6_NF_IPTABLES)
else if (par->family == NFPROTO_IPV6)
- ip6t_log_packet(NFPROTO_IPV6, par->hooknum, skb, par->in,
+ ip6t_log_packet(net, NFPROTO_IPV6, par->hooknum, skb, par->in,
par->out, &li, loginfo->prefix);
#endif
else
diff --git a/net/netfilter/xt_NFLOG.c b/net/netfilter/xt_NFLOG.c
index a17dd0f..fb7497c 100644
--- a/net/netfilter/xt_NFLOG.c
+++ b/net/netfilter/xt_NFLOG.c
@@ -26,13 +26,14 @@
{
const struct xt_nflog_info *info = par->targinfo;
struct nf_loginfo li;
+ struct net *net = dev_net(par->in ? par->in : par->out);
li.type = NF_LOG_TYPE_ULOG;
li.u.ulog.copy_len = info->len;
li.u.ulog.group = info->group;
li.u.ulog.qthreshold = info->threshold;
- nfulnl_log_packet(par->family, par->hooknum, skb, par->in,
+ nfulnl_log_packet(net, par->family, par->hooknum, skb, par->in,
par->out, &li, info->prefix);
return XT_CONTINUE;
}
diff --git a/net/netfilter/xt_TCPOPTSTRIP.c b/net/netfilter/xt_TCPOPTSTRIP.c
index 25fd1c4..1eb1a44 100644
--- a/net/netfilter/xt_TCPOPTSTRIP.c
+++ b/net/netfilter/xt_TCPOPTSTRIP.c
@@ -30,17 +30,28 @@
static unsigned int
tcpoptstrip_mangle_packet(struct sk_buff *skb,
- const struct xt_tcpoptstrip_target_info *info,
+ const struct xt_action_param *par,
unsigned int tcphoff, unsigned int minlen)
{
+ const struct xt_tcpoptstrip_target_info *info = par->targinfo;
unsigned int optl, i, j;
struct tcphdr *tcph;
u_int16_t n, o;
u_int8_t *opt;
+ int len;
+
+ /* This is a fragment, no TCP header is available */
+ if (par->fragoff != 0)
+ return XT_CONTINUE;
if (!skb_make_writable(skb, skb->len))
return NF_DROP;
+ len = skb->len - tcphoff;
+ if (len < (int)sizeof(struct tcphdr) ||
+ tcp_hdr(skb)->doff * 4 > len)
+ return NF_DROP;
+
tcph = (struct tcphdr *)(skb_network_header(skb) + tcphoff);
opt = (u_int8_t *)tcph;
@@ -76,7 +87,7 @@
static unsigned int
tcpoptstrip_tg4(struct sk_buff *skb, const struct xt_action_param *par)
{
- return tcpoptstrip_mangle_packet(skb, par->targinfo, ip_hdrlen(skb),
+ return tcpoptstrip_mangle_packet(skb, par, ip_hdrlen(skb),
sizeof(struct iphdr) + sizeof(struct tcphdr));
}
@@ -94,7 +105,7 @@
if (tcphoff < 0)
return NF_DROP;
- return tcpoptstrip_mangle_packet(skb, par->targinfo, tcphoff,
+ return tcpoptstrip_mangle_packet(skb, par, tcphoff,
sizeof(*ipv6h) + sizeof(struct tcphdr));
}
#endif
diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c
index d8d4243..6bb1d42 100644
--- a/net/netlabel/netlabel_domainhash.c
+++ b/net/netlabel/netlabel_domainhash.c
@@ -245,6 +245,71 @@
}
}
+/**
+ * netlbl_domhsh_validate - Validate a new domain mapping entry
+ * @entry: the entry to validate
+ *
+ * This function validates the new domain mapping entry to ensure that it is
+ * a valid entry. Returns zero on success, negative values on failure.
+ *
+ */
+static int netlbl_domhsh_validate(const struct netlbl_dom_map *entry)
+{
+ struct netlbl_af4list *iter4;
+ struct netlbl_domaddr4_map *map4;
+#if IS_ENABLED(CONFIG_IPV6)
+ struct netlbl_af6list *iter6;
+ struct netlbl_domaddr6_map *map6;
+#endif /* IPv6 */
+
+ if (entry == NULL)
+ return -EINVAL;
+
+ switch (entry->type) {
+ case NETLBL_NLTYPE_UNLABELED:
+ if (entry->type_def.cipsov4 != NULL ||
+ entry->type_def.addrsel != NULL)
+ return -EINVAL;
+ break;
+ case NETLBL_NLTYPE_CIPSOV4:
+ if (entry->type_def.cipsov4 == NULL)
+ return -EINVAL;
+ break;
+ case NETLBL_NLTYPE_ADDRSELECT:
+ netlbl_af4list_foreach(iter4, &entry->type_def.addrsel->list4) {
+ map4 = netlbl_domhsh_addr4_entry(iter4);
+ switch (map4->type) {
+ case NETLBL_NLTYPE_UNLABELED:
+ if (map4->type_def.cipsov4 != NULL)
+ return -EINVAL;
+ break;
+ case NETLBL_NLTYPE_CIPSOV4:
+ if (map4->type_def.cipsov4 == NULL)
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+#if IS_ENABLED(CONFIG_IPV6)
+ netlbl_af6list_foreach(iter6, &entry->type_def.addrsel->list6) {
+ map6 = netlbl_domhsh_addr6_entry(iter6);
+ switch (map6->type) {
+ case NETLBL_NLTYPE_UNLABELED:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+#endif /* IPv6 */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/*
* Domain Hash Table Functions
*/
@@ -311,6 +376,10 @@
struct netlbl_af6list *tmp6;
#endif /* IPv6 */
+ ret_val = netlbl_domhsh_validate(entry);
+ if (ret_val != 0)
+ return ret_val;
+
/* XXX - we can remove this RCU read lock as the spinlock protects the
* entire function, but before we do we need to fixup the
* netlbl_af[4,6]list RCU functions to do "the right thing" with
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 84c9ad7..73405e0 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -638,17 +638,21 @@
* cfg80211_mutex lock
*/
res = rfkill_register(rdev->rfkill);
- if (res)
- goto out_rm_dev;
+ if (res) {
+ device_del(&rdev->wiphy.dev);
+
+ mutex_lock(&cfg80211_mutex);
+ debugfs_remove_recursive(rdev->wiphy.debugfsdir);
+ list_del_rcu(&rdev->list);
+ wiphy_regulatory_deregister(wiphy);
+ mutex_unlock(&cfg80211_mutex);
+ return res;
+ }
rtnl_lock();
rdev->wiphy.registered = true;
rtnl_unlock();
return 0;
-
-out_rm_dev:
- device_del(&rdev->wiphy.dev);
- return res;
}
EXPORT_SYMBOL(wiphy_register);
@@ -866,7 +870,6 @@
#endif
__cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, true);
- cfg80211_mlme_down(rdev, dev);
wdev_unlock(wdev);
break;
case NL80211_IFTYPE_MESH_POINT:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index afa2838..dfdb5e6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7577,6 +7577,8 @@
&tcp->payload_tok))
return -ENOBUFS;
+ nla_nest_end(msg, nl_tcp);
+
return 0;
}
@@ -9970,6 +9972,7 @@
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
netdev->ifindex)) ||
+ nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
@@ -10010,6 +10013,7 @@
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(netdev && nla_put_u32(msg, NL80211_ATTR_IFINDEX,
netdev->ifindex)) ||
+ nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
nla_put_u64(msg, NL80211_ATTR_COOKIE, cookie) ||
(ack && nla_put_flag(msg, NL80211_ATTR_ACK)))
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index a9dc5c7..8b5eddf 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -961,7 +961,7 @@
/* was it connected by userspace SME? */
if (!wdev->conn) {
cfg80211_mlme_down(rdev, dev);
- return 0;
+ goto disconnect;
}
if (wdev->sme_state == CFG80211_SME_CONNECTING &&
@@ -987,6 +987,7 @@
return err;
}
+ disconnect:
if (wdev->sme_state == CFG80211_SME_CONNECTED)
__cfg80211_disconnected(dev, NULL, 0, 0, false);
else if (wdev->sme_state == CFG80211_SME_CONNECTING)
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index ecd4fce..5755bc1 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2441,6 +2441,7 @@
TP_STRUCT__entry(
WIPHY_ENTRY
WDEV_ENTRY
+ __field(bool, non_wireless)
__field(bool, disconnect)
__field(bool, magic_pkt)
__field(bool, gtk_rekey_failure)
@@ -2449,20 +2450,22 @@
__field(bool, rfkill_release)
__field(s32, pattern_idx)
__field(u32, packet_len)
- __dynamic_array(u8, packet, wakeup->packet_present_len)
+ __dynamic_array(u8, packet,
+ wakeup ? wakeup->packet_present_len : 0)
),
TP_fast_assign(
WIPHY_ASSIGN;
WDEV_ASSIGN;
- __entry->disconnect = wakeup->disconnect;
- __entry->magic_pkt = wakeup->magic_pkt;
- __entry->gtk_rekey_failure = wakeup->gtk_rekey_failure;
- __entry->eap_identity_req = wakeup->eap_identity_req;
- __entry->four_way_handshake = wakeup->four_way_handshake;
- __entry->rfkill_release = wakeup->rfkill_release;
- __entry->pattern_idx = wakeup->pattern_idx;
- __entry->packet_len = wakeup->packet_len;
- if (wakeup->packet && wakeup->packet_present_len)
+ __entry->non_wireless = !wakeup;
+ __entry->disconnect = wakeup ? wakeup->disconnect : false;
+ __entry->magic_pkt = wakeup ? wakeup->magic_pkt : false;
+ __entry->gtk_rekey_failure = wakeup ? wakeup->gtk_rekey_failure : false;
+ __entry->eap_identity_req = wakeup ? wakeup->eap_identity_req : false;
+ __entry->four_way_handshake = wakeup ? wakeup->four_way_handshake : false;
+ __entry->rfkill_release = wakeup ? wakeup->rfkill_release : false;
+ __entry->pattern_idx = wakeup ? wakeup->pattern_idx : false;
+ __entry->packet_len = wakeup ? wakeup->packet_len : false;
+ if (wakeup && wakeup->packet && wakeup->packet_present_len)
memcpy(__get_dynamic_array(packet), wakeup->packet,
wakeup->packet_present_len);
),
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index bcfda89..0cf003d 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -64,6 +64,7 @@
if (unlikely(x->km.state != XFRM_STATE_VALID)) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTSTATEINVALID);
+ err = -EINVAL;
goto error;
}
diff --git a/tools/perf/scripts/python/net_dropmonitor.py b/tools/perf/scripts/python/net_dropmonitor.py
index a4ffc95..b574059 100755
--- a/tools/perf/scripts/python/net_dropmonitor.py
+++ b/tools/perf/scripts/python/net_dropmonitor.py
@@ -15,35 +15,38 @@
def get_kallsyms_table():
global kallsyms
+
try:
f = open("/proc/kallsyms", "r")
- linecount = 0
- for line in f:
- linecount = linecount+1
- f.seek(0)
except:
return
-
- j = 0
for line in f:
loc = int(line.split()[0], 16)
name = line.split()[2]
- j = j +1
- if ((j % 100) == 0):
- print "\r" + str(j) + "/" + str(linecount),
- kallsyms.append({ 'loc': loc, 'name' : name})
-
- print "\r" + str(j) + "/" + str(linecount)
+ kallsyms.append((loc, name))
kallsyms.sort()
- return
def get_sym(sloc):
loc = int(sloc)
- for i in kallsyms:
- if (i['loc'] >= loc):
- return (i['name'], i['loc']-loc)
- return (None, 0)
+
+ # Invariant: kallsyms[i][0] <= loc for all 0 <= i <= start
+ # kallsyms[i][0] > loc for all end <= i < len(kallsyms)
+ start, end = -1, len(kallsyms)
+ while end != start + 1:
+ pivot = (start + end) // 2
+ if loc < kallsyms[pivot][0]:
+ end = pivot
+ else:
+ start = pivot
+
+ # Now (start == -1 or kallsyms[start][0] <= loc)
+ # and (start == len(kallsyms) - 1 or loc < kallsyms[start + 1][0])
+ if start >= 0:
+ symloc, name = kallsyms[start]
+ return (name, loc - symloc)
+ else:
+ return (None, 0)
def print_drop_table():
print "%25s %25s %25s" % ("LOCATION", "OFFSET", "COUNT")
@@ -64,7 +67,7 @@
# called from perf, when it finds a correspoinding event
def skb__kfree_skb(name, context, cpu, sec, nsec, pid, comm,
- skbaddr, protocol, location):
+ skbaddr, location, protocol):
slocation = str(location)
try:
drop_log[slocation] = drop_log[slocation] + 1
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index d4abc59..0a63658 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -6,7 +6,6 @@
TARGETS += mqueue
TARGETS += net
TARGETS += ptrace
-TARGETS += soft-dirty
TARGETS += vm
all:
diff --git a/tools/testing/selftests/soft-dirty/Makefile b/tools/testing/selftests/soft-dirty/Makefile
deleted file mode 100644
index a9cdc82..0000000
--- a/tools/testing/selftests/soft-dirty/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-CFLAGS += -iquote../../../../include/uapi -Wall
-soft-dirty: soft-dirty.c
-
-all: soft-dirty
-
-clean:
- rm -f soft-dirty
-
-run_tests: all
- @./soft-dirty || echo "soft-dirty selftests: [FAIL]"
diff --git a/tools/testing/selftests/soft-dirty/soft-dirty.c b/tools/testing/selftests/soft-dirty/soft-dirty.c
deleted file mode 100644
index aba4f87..0000000
--- a/tools/testing/selftests/soft-dirty/soft-dirty.c
+++ /dev/null
@@ -1,114 +0,0 @@
-#include <stdlib.h>
-#include <stdio.h>
-#include <sys/mman.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-
-typedef unsigned long long u64;
-
-#define PME_PRESENT (1ULL << 63)
-#define PME_SOFT_DIRTY (1Ull << 55)
-
-#define PAGES_TO_TEST 3
-#ifndef PAGE_SIZE
-#define PAGE_SIZE 4096
-#endif
-
-static void get_pagemap2(char *mem, u64 *map)
-{
- int fd;
-
- fd = open("/proc/self/pagemap2", O_RDONLY);
- if (fd < 0) {
- perror("Can't open pagemap2");
- exit(1);
- }
-
- lseek(fd, (unsigned long)mem / PAGE_SIZE * sizeof(u64), SEEK_SET);
- read(fd, map, sizeof(u64) * PAGES_TO_TEST);
- close(fd);
-}
-
-static inline char map_p(u64 map)
-{
- return map & PME_PRESENT ? 'p' : '-';
-}
-
-static inline char map_sd(u64 map)
-{
- return map & PME_SOFT_DIRTY ? 'd' : '-';
-}
-
-static int check_pte(int step, int page, u64 *map, u64 want)
-{
- if ((map[page] & want) != want) {
- printf("Step %d Page %d has %c%c, want %c%c\n",
- step, page,
- map_p(map[page]), map_sd(map[page]),
- map_p(want), map_sd(want));
- return 1;
- }
-
- return 0;
-}
-
-static void clear_refs(void)
-{
- int fd;
- char *v = "4";
-
- fd = open("/proc/self/clear_refs", O_WRONLY);
- if (write(fd, v, 3) < 3) {
- perror("Can't clear soft-dirty bit");
- exit(1);
- }
- close(fd);
-}
-
-int main(void)
-{
- char *mem, x;
- u64 map[PAGES_TO_TEST];
-
- mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE,
- PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, 0, 0);
-
- x = mem[0];
- mem[2 * PAGE_SIZE] = 'c';
- get_pagemap2(mem, map);
-
- if (check_pte(1, 0, map, PME_PRESENT))
- return 1;
- if (check_pte(1, 1, map, 0))
- return 1;
- if (check_pte(1, 2, map, PME_PRESENT | PME_SOFT_DIRTY))
- return 1;
-
- clear_refs();
- get_pagemap2(mem, map);
-
- if (check_pte(2, 0, map, PME_PRESENT))
- return 1;
- if (check_pte(2, 1, map, 0))
- return 1;
- if (check_pte(2, 2, map, PME_PRESENT))
- return 1;
-
- mem[0] = 'a';
- mem[PAGE_SIZE] = 'b';
- x = mem[2 * PAGE_SIZE];
- get_pagemap2(mem, map);
-
- if (check_pte(3, 0, map, PME_PRESENT | PME_SOFT_DIRTY))
- return 1;
- if (check_pte(3, 1, map, PME_PRESENT | PME_SOFT_DIRTY))
- return 1;
- if (check_pte(3, 2, map, PME_PRESENT))
- return 1;
-
- (void)x; /* gcc warn */
-
- printf("PASS\n");
- return 0;
-}
