)]}'
{
  "commit": "1b6ebdd7bbdb3fdcab82c8056dbae0c23dbaaf4d",
  "tree": "09738c690a93c53f882e37da19298fb02aae52aa",
  "parents": [
    "4e49ffd10f01950bd81e8ef368a1ffb484a7d759"
  ],
  "author": {
    "name": "Candelaria Villareal, Jorge",
    "email": "x0107209@ti.com",
    "time": "Thu Jul 02 19:04:07 2009 -0500"
  },
  "committer": {
    "name": "Mark Brown",
    "email": "broonie@opensource.wolfsonmicro.com",
    "time": "Fri Jul 03 11:01:05 2009 +0100"
  },
  "message": "ASoC: Zoom2: Update twl4030_setup_data parameters\n\nAdd support for EXTMUTE in Zoom2 machine driver. This is necessary\nto further reduce pop noise problem. Signal EXTMUTE is connected to\nsignal GPIO 153 in Zoom2 board.\n\nIn addition, change ramp delay value to 3 (218/161/109 ms). With\nprevious ramp delay value, pop noise was louder. With a longer value\nthe beep tone can be observed.\n\nSigned-off-by: Jorge Eduardo Candelaria \u003cx0107209@ti.com\u003e\nAcked-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "3de6d2bd3903463488e2166be40168e5600b49cf",
      "old_mode": 33188,
      "old_path": "sound/soc/omap/zoom2.c",
      "new_id": "f90b45f56220e0d8b7904021108fd10d17569e34",
      "new_mode": 33188,
      "new_path": "sound/soc/omap/zoom2.c"
    }
  ]
}