Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/block/paride/friq.c b/drivers/block/paride/friq.c
new file mode 100644
index 0000000..5ea2904
--- /dev/null
+++ b/drivers/block/paride/friq.c
@@ -0,0 +1,276 @@
+/*
+ friq.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License
+
+ friq.c is a low-level protocol driver for the Freecom "IQ"
+ parallel port IDE adapter. Early versions of this adapter
+ use the 'frpw' protocol.
+
+ Freecom uses this adapter in a battery powered external
+ CD-ROM drive. It is also used in LS-120 drives by
+ Maxell and Panasonic, and other devices.
+
+ The battery powered drive requires software support to
+ control the power to the drive. This module enables the
+ drive power when the high level driver (pcd) is loaded
+ and disables it when the module is unloaded. Note, if
+ the friq module is built in to the kernel, the power
+ will never be switched off, so other means should be
+ used to conserve battery power.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.12.20 Added support for soft power switch
+*/
+
+#define FRIQ_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
+ w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
+
+#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x08, 0x10 };
+
+static int friq_read_regr( PIA *pi, int cont, int regr )
+
+{ int h,l,r;
+
+ r = regr + cont_map[cont];
+
+ CMD(r);
+ w2(6); l = r1();
+ w2(4); h = r1();
+ w2(4);
+
+ return j44(l,h);
+
+}
+
+static void friq_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ CMD(r);
+ w0(val);
+ w2(5);w2(7);w2(5);w2(4);
+}
+
+static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{ int h, l, k, ph;
+
+ switch(pi->mode) {
+
+ case 0: CMD(regr);
+ for (k=0;k<count;k++) {
+ w2(6); l = r1();
+ w2(4); h = r1();
+ buf[k] = j44(l,h);
+ }
+ w2(4);
+ break;
+
+ case 1: ph = 2;
+ CMD(regr+0xc0);
+ w0(0xff);
+ for (k=0;k<count;k++) {
+ w2(0xa4 + ph);
+ buf[k] = r0();
+ ph = 2 - ph;
+ }
+ w2(0xac); w2(0xa4); w2(4);
+ break;
+
+ case 2: CMD(regr+0x80);
+ for (k=0;k<count-2;k++) buf[k] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 3: CMD(regr+0x80);
+ for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 4: CMD(regr+0x80);
+ for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+ buf[count-4] = r4();
+ buf[count-3] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ }
+}
+
+static void friq_read_block( PIA *pi, char * buf, int count)
+
+{ friq_read_block_int(pi,buf,count,0x08);
+}
+
+static void friq_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch(pi->mode) {
+
+ case 0:
+ case 1: CMD(8); w2(5);
+ for (k=0;k<count;k++) {
+ w0(buf[k]);
+ w2(7);w2(5);
+ }
+ w2(4);
+ break;
+
+ case 2: CMD(0xc8); w2(5);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(4);
+ break;
+
+ case 3: CMD(0xc8); w2(5);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ w2(4);
+ break;
+
+ case 4: CMD(0xc8); w2(5);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ w2(4);
+ break;
+ }
+}
+
+static void friq_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4);
+}
+
+static void friq_disconnect ( PIA *pi )
+
+{ CMD(0x20);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static int friq_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int j, k, r;
+ int e[2] = {0,0};
+
+ pi->saved_r0 = r0();
+ w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
+ udelay(500);
+ w0(pi->saved_r0);
+
+ friq_connect(pi);
+ for (j=0;j<2;j++) {
+ friq_write_regr(pi,0,6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ friq_write_regr(pi,0,2,k^0xaa);
+ friq_write_regr(pi,0,3,k^0x55);
+ if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+ }
+ }
+ friq_disconnect(pi);
+
+ friq_connect(pi);
+ friq_read_block_int(pi,scratch,512,0x10);
+ r = 0;
+ for (k=0;k<128;k++) if (scratch[k] != k) r++;
+ friq_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->device,pi->port,pi->mode,e[0],e[1],r);
+ }
+
+ return (r || (e[0] && e[1]));
+}
+
+
+static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[6] = {"4-bit","8-bit",
+ "EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
+ FRIQ_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+ pi->private = 1;
+ friq_connect(pi);
+ CMD(0x9e); /* disable sleep timer */
+ friq_disconnect(pi);
+
+}
+
+static void friq_release_proto( PIA *pi)
+{
+ if (pi->private) { /* turn off the power */
+ friq_connect(pi);
+ CMD(0x1d); CMD(0x1e);
+ friq_disconnect(pi);
+ pi->private = 0;
+ }
+}
+
+static struct pi_protocol friq = {
+ .owner = THIS_MODULE,
+ .name = "friq",
+ .max_mode = 5,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = friq_write_regr,
+ .read_regr = friq_read_regr,
+ .write_block = friq_write_block,
+ .read_block = friq_read_block,
+ .connect = friq_connect,
+ .disconnect = friq_disconnect,
+ .test_proto = friq_test_proto,
+ .log_adapter = friq_log_adapter,
+ .release_proto = friq_release_proto,
+};
+
+static int __init friq_init(void)
+{
+ return pi_register(&friq)-1;
+}
+
+static void __exit friq_exit(void)
+{
+ pi_unregister(&friq);
+}
+
+MODULE_LICENSE("GPL");
+module_init(friq_init)
+module_exit(friq_exit)
