Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
new file mode 100644
index 0000000..b9bc635
--- /dev/null
+++ b/drivers/mtd/maps/dmv182.c
@@ -0,0 +1,149 @@
+
+/*
+ * drivers/mtd/maps/svme182.c
+ *
+ * Flash map driver for the Dy4 SVME182 board
+ *
+ * $Id: dmv182.c,v 1.5 2004/11/04 13:24:14 gleixner Exp $
+ *
+ * Copyright 2003-2004, TimeSys Corporation
+ *
+ * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/errno.h>
+
+/*
+ * This driver currently handles only the 16MiB user flash bank 1 on the
+ * board. It does not provide access to bank 0 (contains the Dy4 FFW), bank 2
+ * (VxWorks boot), or the optional 48MiB expansion flash.
+ *
+ * scott.wood@timesys.com: On the newer boards with 128MiB flash, it
+ * now supports the first 96MiB (the boot flash bank containing FFW
+ * is excluded). The VxWorks loader is in partition 1.
+ */
+
+#define FLASH_BASE_ADDR 0xf0000000
+#define FLASH_BANK_SIZE (128*1024*1024)
+
+MODULE_AUTHOR("Scott Wood, TimeSys Corporation <scott.wood@timesys.com>");
+MODULE_DESCRIPTION("User-programmable flash device on the Dy4 SVME182 board");
+MODULE_LICENSE("GPL");
+
+static struct map_info svme182_map = {
+ .name = "Dy4 SVME182",
+ .bankwidth = 32,
+ .size = 128 * 1024 * 1024
+};
+
+#define BOOTIMAGE_PART_SIZE ((6*1024*1024)-RESERVED_PART_SIZE)
+
+// Allow 6MiB for the kernel
+#define NEW_BOOTIMAGE_PART_SIZE (6 * 1024 * 1024)
+// Allow 1MiB for the bootloader
+#define NEW_BOOTLOADER_PART_SIZE (1024 * 1024)
+// Use the remaining 9MiB at the end of flash for the RFS
+#define NEW_RFS_PART_SIZE (0x01000000 - NEW_BOOTLOADER_PART_SIZE - \
+ NEW_BOOTIMAGE_PART_SIZE)
+
+static struct mtd_partition svme182_partitions[] = {
+ // The Lower PABS is only 128KiB, but the partition code doesn't
+ // like partitions that don't end on the largest erase block
+ // size of the device, even if all of the erase blocks in the
+ // partition are small ones. The hardware should prevent
+ // writes to the actual PABS areas.
+ {
+ name: "Lower PABS and CPU 0 bootloader or kernel",
+ size: 6*1024*1024,
+ offset: 0,
+ },
+ {
+ name: "Root Filesystem",
+ size: 10*1024*1024,
+ offset: MTDPART_OFS_NXTBLK
+ },
+ {
+ name: "CPU1 Bootloader",
+ size: 1024*1024,
+ offset: MTDPART_OFS_NXTBLK,
+ },
+ {
+ name: "Extra",
+ size: 110*1024*1024,
+ offset: MTDPART_OFS_NXTBLK
+ },
+ {
+ name: "Foundation Firmware and Upper PABS",
+ size: 1024*1024,
+ offset: MTDPART_OFS_NXTBLK,
+ mask_flags: MTD_WRITEABLE // read-only
+ }
+};
+
+static struct mtd_info *this_mtd;
+
+static int __init init_svme182(void)
+{
+ struct mtd_partition *partitions;
+ int num_parts = sizeof(svme182_partitions) / sizeof(struct mtd_partition);
+
+ partitions = svme182_partitions;
+
+ svme182_map.virt = ioremap(FLASH_BASE_ADDR, svme182_map.size);
+
+ if (svme182_map.virt == 0) {
+ printk("Failed to ioremap FLASH memory area.\n");
+ return -EIO;
+ }
+
+ simple_map_init(&svme182_map);
+
+ this_mtd = do_map_probe("cfi_probe", &svme182_map);
+ if (!this_mtd)
+ {
+ iounmap((void *)svme182_map.virt);
+ return -ENXIO;
+ }
+
+ printk(KERN_NOTICE "SVME182 flash device: %dMiB at 0x%08x\n",
+ this_mtd->size >> 20, FLASH_BASE_ADDR);
+
+ this_mtd->owner = THIS_MODULE;
+ add_mtd_partitions(this_mtd, partitions, num_parts);
+
+ return 0;
+}
+
+static void __exit cleanup_svme182(void)
+{
+ if (this_mtd)
+ {
+ del_mtd_partitions(this_mtd);
+ map_destroy(this_mtd);
+ }
+
+ if (svme182_map.virt)
+ {
+ iounmap((void *)svme182_map.virt);
+ svme182_map.virt = 0;
+ }
+
+ return;
+}
+
+module_init(init_svme182);
+module_exit(cleanup_svme182);
