Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/sound/oss/ad1848_mixer.h b/sound/oss/ad1848_mixer.h
new file mode 100644
index 0000000..f9231c6
--- /dev/null
+++ b/sound/oss/ad1848_mixer.h
@@ -0,0 +1,253 @@
+/*
+ * sound/ad1848_mixer.h
+ *
+ * Definitions for the mixer of AD1848 and compatible codecs.
+ */
+
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ */
+
+
+/*
+ * The AD1848 codec has generic input lines called Line, Aux1 and Aux2.
+ * Sound card manufacturers have connected actual inputs (CD, synth, line,
+ * etc) to these inputs in different order. Therefore it's difficult
+ * to assign mixer channels to these inputs correctly. The following
+ * contains two alternative mappings. The first one is for GUS MAX and
+ * the second is just a generic one (line1, line2 and line3).
+ * (Actually this is not a mapping but rather some kind of interleaving
+ * solution).
+ */
+#define MODE1_REC_DEVICES (SOUND_MASK_LINE3 | SOUND_MASK_MIC | \
+ SOUND_MASK_LINE1 | SOUND_MASK_IMIX)
+
+#define SPRO_REC_DEVICES (SOUND_MASK_LINE | SOUND_MASK_MIC | \
+ SOUND_MASK_CD | SOUND_MASK_LINE1)
+
+#define MODE1_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_MIC | \
+ SOUND_MASK_LINE2 | \
+ SOUND_MASK_IGAIN | \
+ SOUND_MASK_PCM | SOUND_MASK_IMIX)
+
+#define MODE2_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \
+ SOUND_MASK_MIC | \
+ SOUND_MASK_LINE3 | SOUND_MASK_SPEAKER | \
+ SOUND_MASK_IGAIN | \
+ SOUND_MASK_PCM | SOUND_MASK_IMIX)
+
+#define MODE3_MIXER_DEVICES (MODE2_MIXER_DEVICES | SOUND_MASK_VOLUME)
+
+/* OPTi 82C930 has no IMIX level control, but it can still be selected as an
+ * input
+ */
+#define C930_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \
+ SOUND_MASK_MIC | SOUND_MASK_VOLUME | \
+ SOUND_MASK_LINE3 | \
+ SOUND_MASK_IGAIN | SOUND_MASK_PCM)
+
+#define SPRO_MIXER_DEVICES (SOUND_MASK_VOLUME | SOUND_MASK_PCM | \
+ SOUND_MASK_LINE | SOUND_MASK_SYNTH | \
+ SOUND_MASK_CD | SOUND_MASK_MIC | \
+ SOUND_MASK_SPEAKER | SOUND_MASK_LINE1 | \
+ SOUND_MASK_OGAIN)
+
+struct mixer_def {
+ unsigned int regno:6; /* register number for volume */
+ unsigned int polarity:1; /* volume polarity: 0=normal, 1=reversed */
+ unsigned int bitpos:3; /* position of bits in register for volume */
+ unsigned int nbits:3; /* number of bits in register for volume */
+ unsigned int mutereg:6; /* register number for mute bit */
+ unsigned int mutepol:1; /* mute polarity: 0=normal, 1=reversed */
+ unsigned int mutepos:4; /* position of mute bit in register */
+ unsigned int recreg:6; /* register number for recording bit */
+ unsigned int recpol:1; /* recording polarity: 0=normal, 1=reversed */
+ unsigned int recpos:4; /* position of recording bit in register */
+};
+
+static char mix_cvt[101] = {
+ 0, 0, 3, 7,10,13,16,19,21,23,26,28,30,32,34,35,37,39,40,42,
+ 43,45,46,47,49,50,51,52,53,55,56,57,58,59,60,61,62,63,64,65,
+ 65,66,67,68,69,70,70,71,72,73,73,74,75,75,76,77,77,78,79,79,
+ 80,81,81,82,82,83,84,84,85,85,86,86,87,87,88,88,89,89,90,90,
+ 91,91,92,92,93,93,94,94,95,95,96,96,96,97,97,98,98,98,99,99,
+ 100
+};
+
+typedef struct mixer_def mixer_ent;
+typedef mixer_ent mixer_ents[2];
+
+/*
+ * Most of the mixer entries work in backwards. Setting the polarity field
+ * makes them to work correctly.
+ *
+ * The channel numbering used by individual sound cards is not fixed. Some
+ * cards have assigned different meanings for the AUX1, AUX2 and LINE inputs.
+ * The current version doesn't try to compensate this.
+ */
+
+#define MIX_ENT(name, reg_l, pola_l, pos_l, len_l, reg_r, pola_r, pos_r, len_r, mute_bit) \
+ [name] = {{reg_l, pola_l, pos_l, len_l, reg_l, 0, mute_bit, 0, 0, 8}, \
+ {reg_r, pola_r, pos_r, len_r, reg_r, 0, mute_bit, 0, 0, 8}}
+
+#define MIX_ENT2(name, reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \
+ rec_reg_l, rec_pola_l, rec_pos_l, \
+ reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r, \
+ rec_reg_r, rec_pola_r, rec_pos_r) \
+ [name] = {{reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \
+ rec_reg_l, rec_pola_l, rec_pos_l}, \
+ {reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r, \
+ rec_reg_r, rec_pola_r, rec_pos_r}}
+
+static mixer_ents ad1848_mix_devices[32] = {
+ MIX_ENT(SOUND_MIXER_VOLUME, 27, 1, 0, 4, 29, 1, 0, 4, 8),
+ MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7),
+ MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_MIC, 0, 0, 5, 1, 1, 0, 5, 1, 8),
+ MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_IMIX, 13, 1, 2, 6, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
+ MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 0, 5, 19, 1, 0, 5, 7)
+};
+
+static mixer_ents iwave_mix_devices[32] = {
+ MIX_ENT(SOUND_MIXER_VOLUME, 25, 1, 0, 5, 27, 1, 0, 5, 8),
+ MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7),
+ MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_MIC, 0, 0, 5, 1, 1, 0, 5, 1, 8),
+ MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_IMIX, 16, 1, 0, 5, 17, 1, 0, 5, 8),
+ MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
+ MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 0, 5, 19, 1, 0, 5, 7)
+};
+
+static mixer_ents cs42xb_mix_devices[32] = {
+ /* Digital master volume actually has seven bits, but we only use
+ six to avoid the discontinuity when the analog gain kicks in. */
+ MIX_ENT(SOUND_MIXER_VOLUME, 46, 1, 0, 6, 47, 1, 0, 6, 7),
+ MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7),
+ MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_MIC, 34, 1, 0, 5, 35, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7),
+ /* For the IMIX entry, it was not possible to use the MIX_ENT macro
+ because the mute bit is in different positions for the two
+ channels and requires reverse polarity. */
+ [SOUND_MIXER_IMIX] = {{13, 1, 2, 6, 13, 1, 0, 0, 0, 8},
+ {42, 1, 0, 6, 42, 1, 7, 0, 0, 8}},
+ MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
+ MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE3, 38, 1, 0, 6, 39, 1, 0, 6, 7)
+};
+
+/* OPTi 82C930 has somewhat different port addresses.
+ * Note: VOLUME == SPEAKER, SYNTH == LINE2, LINE == LINE3, CD == LINE1
+ * VOLUME, SYNTH, LINE, CD are not enabled above.
+ * MIC is level of mic monitoring direct to output. Same for CD, LINE, etc.
+ */
+static mixer_ents c930_mix_devices[32] = {
+ MIX_ENT(SOUND_MIXER_VOLUME, 22, 1, 1, 5, 23, 1, 1, 5, 7),
+ MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 1, 4, 5, 1, 1, 4, 7),
+ MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 5, 7, 1, 0, 5, 7),
+ MIX_ENT(SOUND_MIXER_SPEAKER, 22, 1, 1, 5, 23, 1, 1, 5, 7),
+ MIX_ENT(SOUND_MIXER_LINE, 18, 1, 1, 4, 19, 1, 1, 4, 7),
+ MIX_ENT(SOUND_MIXER_MIC, 20, 1, 1, 4, 21, 1, 1, 4, 7),
+ MIX_ENT(SOUND_MIXER_CD, 2, 1, 1, 4, 3, 1, 1, 4, 7),
+ MIX_ENT(SOUND_MIXER_IMIX, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8),
+ MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 1, 4, 3, 1, 1, 4, 7),
+ MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 1, 4, 5, 1, 1, 4, 7),
+ MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 1, 4, 19, 1, 1, 4, 7)
+};
+
+static mixer_ents spro_mix_devices[32] = {
+ MIX_ENT (SOUND_MIXER_VOLUME, 19, 0, 4, 4, 19, 0, 0, 4, 8),
+ MIX_ENT (SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT (SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT2(SOUND_MIXER_SYNTH, 4, 1, 1, 4, 23, 0, 3, 0, 0, 8,
+ 5, 1, 1, 4, 23, 0, 3, 0, 0, 8),
+ MIX_ENT (SOUND_MIXER_PCM, 6, 1, 1, 4, 7, 1, 1, 4, 8),
+ MIX_ENT (SOUND_MIXER_SPEAKER, 18, 0, 3, 2, 0, 0, 0, 0, 8),
+ MIX_ENT2(SOUND_MIXER_LINE, 20, 0, 4, 4, 17, 1, 4, 16, 0, 2,
+ 20, 0, 0, 4, 17, 1, 3, 16, 0, 1),
+ MIX_ENT2(SOUND_MIXER_MIC, 18, 0, 0, 3, 17, 1, 0, 16, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
+ MIX_ENT2(SOUND_MIXER_CD, 21, 0, 4, 4, 17, 1, 2, 16, 0, 4,
+ 21, 0, 0, 4, 17, 1, 1, 16, 0, 3),
+ MIX_ENT (SOUND_MIXER_IMIX, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT (SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT (SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT (SOUND_MIXER_IGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8),
+ MIX_ENT (SOUND_MIXER_OGAIN, 17, 1, 6, 1, 0, 0, 0, 0, 8),
+ /* This is external wavetable */
+ MIX_ENT2(SOUND_MIXER_LINE1, 22, 0, 4, 4, 23, 1, 1, 23, 0, 4,
+ 22, 0, 0, 4, 23, 1, 0, 23, 0, 5),
+};
+
+static int default_mixer_levels[32] =
+{
+ 0x3232, /* Master Volume */
+ 0x3232, /* Bass */
+ 0x3232, /* Treble */
+ 0x4b4b, /* FM */
+ 0x3232, /* PCM */
+ 0x1515, /* PC Speaker */
+ 0x2020, /* Ext Line */
+ 0x1010, /* Mic */
+ 0x4b4b, /* CD */
+ 0x0000, /* Recording monitor */
+ 0x4b4b, /* Second PCM */
+ 0x4b4b, /* Recording level */
+ 0x4b4b, /* Input gain */
+ 0x4b4b, /* Output gain */
+ 0x2020, /* Line1 */
+ 0x2020, /* Line2 */
+ 0x1515 /* Line3 (usually line in)*/
+};
+
+#define LEFT_CHN 0
+#define RIGHT_CHN 1
+
+/*
+ * Channel enable bits for ioctl(SOUND_MIXER_PRIVATE1)
+ */
+
+#ifndef AUDIO_SPEAKER
+#define AUDIO_SPEAKER 0x01 /* Enable mono output */
+#define AUDIO_HEADPHONE 0x02 /* Sparc only */
+#define AUDIO_LINE_OUT 0x04 /* Sparc only */
+#endif
