ath9k: Cleanup init/deinit routines
The device initialization and termination functions
were messy and convoluted. Introduce helper functions
to clarify init_softc() and simplify things in general.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f7af5ea..95b9a07 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -113,25 +113,22 @@
u16 subsysid;
u32 val;
int ret = 0;
- struct ath_hw *ah;
char hw_name[64];
if (pci_enable_device(pdev))
return -EIO;
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
- goto bad;
+ goto err_dma;
}
ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
"DMA enable failed\n");
- goto bad;
+ goto err_dma;
}
/*
@@ -171,22 +168,22 @@
if (ret) {
dev_err(&pdev->dev, "PCI memory region reserve error\n");
ret = -ENODEV;
- goto bad;
+ goto err_region;
}
mem = pci_iomap(pdev, 0, 0);
if (!mem) {
printk(KERN_ERR "PCI memory map error\n") ;
ret = -EIO;
- goto bad1;
+ goto err_iomap;
}
hw = ieee80211_alloc_hw(sizeof(struct ath_wiphy) +
sizeof(struct ath_softc), &ath9k_ops);
if (!hw) {
- dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+ dev_err(&pdev->dev, "No memory for ieee80211_hw\n");
ret = -ENOMEM;
- goto bad2;
+ goto err_alloc_hw;
}
SET_IEEE80211_DEV(hw, &pdev->dev);
@@ -201,25 +198,22 @@
sc->dev = &pdev->dev;
sc->mem = mem;
- pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
- ret = ath_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
- if (ret) {
- dev_err(&pdev->dev, "failed to initialize device\n");
- goto bad3;
- }
-
- /* setup interrupt service routine */
-
ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
if (ret) {
dev_err(&pdev->dev, "request_irq failed\n");
- goto bad4;
+ goto err_irq;
}
sc->irq = pdev->irq;
- ah = sc->sc_ah;
- ath9k_hw_name(ah, hw_name, sizeof(hw_name));
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
+ ret = ath9k_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize device\n");
+ goto err_init;
+ }
+
+ ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
printk(KERN_INFO
"%s: %s mem=0x%lx, irq=%d\n",
wiphy_name(hw->wiphy),
@@ -227,15 +221,18 @@
(unsigned long)mem, pdev->irq);
return 0;
-bad4:
- ath_detach(sc);
-bad3:
+
+err_init:
+ free_irq(sc->irq, sc);
+err_irq:
ieee80211_free_hw(hw);
-bad2:
+err_alloc_hw:
pci_iounmap(pdev, mem);
-bad1:
+err_iomap:
pci_release_region(pdev, 0);
-bad:
+err_region:
+ /* Nothing */
+err_dma:
pci_disable_device(pdev);
return ret;
}
@@ -245,8 +242,12 @@
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- ath_cleanup(sc);
+ ath9k_deinit_device(sc);
+ free_irq(sc->irq, sc);
+ ieee80211_free_hw(sc->hw);
+ ath_bus_cleanup(common);
}
#ifdef CONFIG_PM
