blob: 2cb1bcd309760a01b0e99b33b444c01032344518 [file] [log] [blame]
/*
* Device Tree Include file for Marvell Armada 375 family SoC
*
* Copyright (C) 2014 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Marvell Armada 375 family SoC";
compatible = "marvell,armada375";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
serial0 = &uart0;
serial1 = &uart1;
};
clocks {
/* 1 GHz fixed main PLL */
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
refclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "marvell,armada-375-smp";
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts-extended = <&mpic 3>;
};
soc {
compatible = "marvell,armada375-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
interrupt-parent = <&gic>;
pcie-mem-aperture = <0xe0000000 0x8000000>;
pcie-io-aperture = <0xe8000000 0x100000>;
bootrom {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
L2: cache-controller@8000 {
compatible = "arm,pl310-cache";
reg = <0x8000 0x1000>;
cache-unified;
cache-level = <2>;
arm,double-linefill-incr = <0>;
arm,double-linefill-wrap = <0>;
arm,double-linefill = <0>;
prefetch-data = <1>;
};
scu: scu@c000 {
compatible = "arm,cortex-a9-scu";
reg = <0xc000 0x58>;
};
timer0: timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
clocks = <&coreclk 2>;
};
gic: interrupt-controller@d000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#size-cells = <0>;
interrupt-controller;
reg = <0xd000 0x1000>,
<0xc100 0x100>;
};
mdio: mdio@c0054 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0xc0054 0x4>;
clocks = <&gateclk 19>;
};
/* Network controller */
ethernet: ethernet@f0000 {
compatible = "marvell,armada-375-pp2";
reg = <0xf0000 0xa000>, /* Packet Processor regs */
<0xc0000 0x3060>, /* LMS regs */
<0xc4000 0x100>, /* eth0 regs */
<0xc5000 0x100>; /* eth1 regs */
clocks = <&gateclk 3>, <&gateclk 19>;
clock-names = "pp_clk", "gop_clk";
status = "disabled";
eth0: eth0 {
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
port-id = <0>;
status = "disabled";
};
eth1: eth1 {
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
port-id = <1>;
status = "disabled";
};
};
rtc: rtc@10300 {
compatible = "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
spi0: spi@10600 {
compatible = "marvell,armada-375-spi",
"marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
compatible = "marvell,armada-375-spi",
"marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
i2c1: i2c@11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
pinctrl: pinctrl@18000 {
compatible = "marvell,mv88f6720-pinctrl";
reg = <0x18000 0x24>;
i2c0_pins: i2c0-pins {
marvell,pins = "mpp14", "mpp15";
marvell,function = "i2c0";
};
i2c1_pins: i2c1-pins {
marvell,pins = "mpp61", "mpp62";
marvell,function = "i2c1";
};
nand_pins: nand-pins {
marvell,pins = "mpp0", "mpp1", "mpp2",
"mpp3", "mpp4", "mpp5",
"mpp6", "mpp7", "mpp8",
"mpp9", "mpp10", "mpp11",
"mpp12", "mpp13";
marvell,function = "nand";
};
sdio_pins: sdio-pins {
marvell,pins = "mpp24", "mpp25", "mpp26",
"mpp27", "mpp28", "mpp29";
marvell,function = "sd";
};
spi0_pins: spi0-pins {
marvell,pins = "mpp0", "mpp1", "mpp4",
"mpp5", "mpp8", "mpp9";
marvell,function = "spi0";
};
};
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
gpio1: gpio@18140 {
compatible = "marvell,orion-gpio";
reg = <0x18140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
gpio2: gpio@18180 {
compatible = "marvell,orion-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
systemc: system-controller@18200 {
compatible = "marvell,armada-375-system-controller";
reg = <0x18200 0x100>;
};
gateclk: clock-gating-control@18220 {
compatible = "marvell,armada-375-gating-clock";
reg = <0x18220 0x4>;
clocks = <&coreclk 0>;
#clock-cells = <1>;
};
usbcluster: usb-cluster@18400 {
compatible = "marvell,armada-375-usb-cluster";
reg = <0x18400 0x4>;
#phy-cells = <1>;
};
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
};
mpic: interrupt-controller@20a00 {
compatible = "marvell,mpic";
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
#interrupt-cells = <1>;
#size-cells = <1>;
interrupt-controller;
msi-controller;
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
timer1: timer@20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<&mpic 5>,
<&mpic 6>;
clocks = <&coreclk 0>, <&refclk>;
clock-names = "nbclk", "fixed";
};
watchdog: watchdog@20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
clocks = <&coreclk 0>, <&refclk>;
clock-names = "nbclk", "fixed";
};
cpurst: cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
coherencyfab: coherency-fabric@21010 {
compatible = "marvell,armada-375-coherency-fabric";
reg = <0x21010 0x1c>;
};
usb0: usb@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 18>;
phys = <&usbcluster PHY_TYPE_USB2>;
phy-names = "usb";
status = "disabled";
};
usb1: usb@54000 {
compatible = "marvell,orion-ehci";
reg = <0x54000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 26>;
status = "disabled";
};
usb2: usb3@58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 16>;
phys = <&usbcluster PHY_TYPE_USB3>;
phy-names = "usb";
status = "disabled";
};
xor0: xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
clocks = <&gateclk 22>;
status = "okay";
xor00 {
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
xor1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
clocks = <&gateclk 23>;
status = "okay";
xor10 {
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
};
xor11 {
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
cesa: crypto@90000 {
compatible = "marvell,armada-375-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 30>, <&gateclk 31>,
<&gateclk 28>, <&gateclk 29>;
clock-names = "cesa0", "cesa1",
"cesaz0", "cesaz1";
marvell,crypto-srams = <&crypto_sram0>,
<&crypto_sram1>;
marvell,crypto-sram-size = <0x800>;
};
sata: sata@a0000 {
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 14>, <&gateclk 20>;
clock-names = "0", "1";
status = "disabled";
};
nand: nand@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 11>;
status = "disabled";
};
sdio: mvsdio@d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 17>;
bus-width = <4>;
cap-sdio-irq;
cap-sd-highspeed;
cap-mmc-highspeed;
status = "disabled";
};
thermal: thermal@e8078 {
compatible = "marvell,armada375-thermal";
reg = <0xe8078 0x4>, <0xe807c 0x8>;
status = "okay";
};
coreclk: mvebu-sar@e8204 {
compatible = "marvell,armada-375-core-clock";
reg = <0xe8204 0x04>;
#clock-cells = <1>;
};
coredivclk: corediv-clock@e8250 {
compatible = "marvell,armada-375-corediv-clock";
reg = <0xe8250 0xc>;
#clock-cells = <1>;
clocks = <&mainpll>;
clock-output-names = "nand";
};
};
pciec: pcie@82000000 {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
msi-parent = <&mpic>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>;
pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie1: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
};
crypto_sram0: sa-sram0 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
clocks = <&gateclk 30>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
};
crypto_sram1: sa-sram1 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
clocks = <&gateclk 31>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
};
};