/*
 * Copyright (c) 2013 MundoReader S.L.
 * Author: Heiko Stuebner <heiko@sntech.de>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3066a-cru.h>
#include "rk3xxx.dtsi"

/ {
	compatible = "rockchip,rk3066a";

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		enable-method = "rockchip,rk3066-smp";

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a9";
			next-level-cache = <&L2>;
			reg = <0x0>;
			operating-points = <
				/* kHz    uV */
				1416000 1300000
				1200000 1175000
				1008000 1125000
				816000  1125000
				600000  1100000
				504000  1100000
				312000  1075000
			>;
			clock-latency = <40000>;
			clocks = <&cru ARMCLK>;
		};
		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a9";
			next-level-cache = <&L2>;
			reg = <0x1>;
		};
	};

	sram: sram@10080000 {
		compatible = "mmio-sram";
		reg = <0x10080000 0x10000>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x10080000 0x10000>;

		smp-sram@0 {
			compatible = "rockchip,rk3066-smp-sram";
			reg = <0x0 0x50>;
		};
	};

	i2s0: i2s@10118000 {
		compatible = "rockchip,rk3066-i2s";
		reg = <0x10118000 0x2000>;
		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s0_bus>;
		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
		dma-names = "tx", "rx";
		clock-names = "i2s_hclk", "i2s_clk";
		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
		rockchip,playback-channels = <8>;
		rockchip,capture-channels = <2>;
		status = "disabled";
	};

	i2s1: i2s@1011a000 {
		compatible = "rockchip,rk3066-i2s";
		reg = <0x1011a000 0x2000>;
		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1_bus>;
		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
		dma-names = "tx", "rx";
		clock-names = "i2s_hclk", "i2s_clk";
		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
		rockchip,playback-channels = <2>;
		rockchip,capture-channels = <2>;
		status = "disabled";
	};

	i2s2: i2s@1011c000 {
		compatible = "rockchip,rk3066-i2s";
		reg = <0x1011c000 0x2000>;
		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s2_bus>;
		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
		dma-names = "tx", "rx";
		clock-names = "i2s_hclk", "i2s_clk";
		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
		rockchip,playback-channels = <2>;
		rockchip,capture-channels = <2>;
		status = "disabled";
	};

	cru: clock-controller@20000000 {
		compatible = "rockchip,rk3066a-cru";
		reg = <0x20000000 0x1000>;
		rockchip,grf = <&grf>;

		#clock-cells = <1>;
		#reset-cells = <1>;
		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
				  <&cru ACLK_CPU>, <&cru HCLK_CPU>,
				  <&cru PCLK_CPU>, <&cru ACLK_PERI>,
				  <&cru HCLK_PERI>, <&cru PCLK_PERI>;
		assigned-clock-rates = <400000000>, <594000000>,
				       <300000000>, <150000000>,
				       <75000000>, <300000000>,
				       <150000000>, <75000000>;
	};

	timer@2000e000 {
		compatible = "snps,dw-apb-timer-osc";
		reg = <0x2000e000 0x100>;
		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
		clock-names = "timer", "pclk";
	};

	efuse: efuse@20010000 {
		compatible = "rockchip,rk3066a-efuse";
		reg = <0x20010000 0x4000>;
		#address-cells = <1>;
		#size-cells = <1>;
		clocks = <&cru PCLK_EFUSE>;
		clock-names = "pclk_efuse";

		cpu_leakage: cpu_leakage@17 {
			reg = <0x17 0x1>;
		};
	};

	timer@20038000 {
		compatible = "snps,dw-apb-timer-osc";
		reg = <0x20038000 0x100>;
		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
		clock-names = "timer", "pclk";
	};

	timer@2003a000 {
		compatible = "snps,dw-apb-timer-osc";
		reg = <0x2003a000 0x100>;
		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
		clock-names = "timer", "pclk";
	};

	tsadc: tsadc@20060000 {
		compatible = "rockchip,rk3066-tsadc";
		reg = <0x20060000 0x100>;
		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
		clock-names = "saradc", "apb_pclk";
		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
		#io-channel-cells = <1>;
		resets = <&cru SRST_TSADC>;
		reset-names = "saradc-apb";
		status = "disabled";
	};

	usbphy: phy {
		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
		rockchip,grf = <&grf>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";

		usbphy0: usb-phy@17c {
			#phy-cells = <0>;
			reg = <0x17c>;
			clocks = <&cru SCLK_OTGPHY0>;
			clock-names = "phyclk";
			#clock-cells = <0>;
		};

		usbphy1: usb-phy@188 {
			#phy-cells = <0>;
			reg = <0x188>;
			clocks = <&cru SCLK_OTGPHY1>;
			clock-names = "phyclk";
			#clock-cells = <0>;
		};
	};

	pinctrl: pinctrl {
		compatible = "rockchip,rk3066a-pinctrl";
		rockchip,grf = <&grf>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		gpio0: gpio0@20034000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x20034000 0x100>;
			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO0>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio1: gpio1@2003c000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x2003c000 0x100>;
			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO1>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio2: gpio2@2003e000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x2003e000 0x100>;
			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO2>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio3: gpio3@20080000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x20080000 0x100>;
			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO3>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio4: gpio4@20084000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x20084000 0x100>;
			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO4>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio6: gpio6@2000a000 {
			compatible = "rockchip,gpio-bank";
			reg = <0x2000a000 0x100>;
			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&cru PCLK_GPIO6>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pcfg_pull_default: pcfg_pull_default {
			bias-pull-pin-default;
		};

		pcfg_pull_none: pcfg_pull_none {
			bias-disable;
		};

		emac {
			emac_xfer: emac-xfer {
				rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
						<RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
						<RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
						<RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
						<RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
						<RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */
						<RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
						<RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */
			};

			emac_mdio: emac-mdio {
				rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */
						<RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */
			};
		};

		emmc {
			emmc_clk: emmc-clk {
				rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
			};

			emmc_cmd: emmc-cmd {
				rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
			};

			emmc_rst: emmc-rst {
				rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
			};

			/*
			 * The data pins are shared between nandc and emmc and
			 * not accessible through pinctrl. Also they should've
			 * been already set correctly by firmware, as
			 * flash/emmc is the boot-device.
			 */
		};

		i2c0 {
			i2c0_xfer: i2c0-xfer {
				rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
						<RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		i2c1 {
			i2c1_xfer: i2c1-xfer {
				rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
						<RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		i2c2 {
			i2c2_xfer: i2c2-xfer {
				rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
						<RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		i2c3 {
			i2c3_xfer: i2c3-xfer {
				rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
						<RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
			};
		};

		i2c4 {
			i2c4_xfer: i2c4-xfer {
				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		pwm0 {
			pwm0_out: pwm0-out {
				rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		pwm1 {
			pwm1_out: pwm1-out {
				rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		pwm2 {
			pwm2_out: pwm2-out {
				rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		pwm3 {
			pwm3_out: pwm3-out {
				rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
			};
		};

		spi0 {
			spi0_clk: spi0-clk {
				rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi0_cs0: spi0-cs0 {
				rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi0_tx: spi0-tx {
				rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi0_rx: spi0-rx {
				rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi0_cs1: spi0-cs1 {
				rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		spi1 {
			spi1_clk: spi1-clk {
				rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi1_cs0: spi1-cs0 {
				rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi1_rx: spi1-rx {
				rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi1_tx: spi1-tx {
				rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
			};
			spi1_cs1: spi1-cs1 {
				rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
			};
		};

		uart0 {
			uart0_xfer: uart0-xfer {
				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
			};

			uart0_cts: uart0-cts {
				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
			};

			uart0_rts: uart0-rts {
				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		uart1 {
			uart1_xfer: uart1-xfer {
				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
			};

			uart1_cts: uart1-cts {
				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
			};

			uart1_rts: uart1-rts {
				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		uart2 {
			uart2_xfer: uart2-xfer {
				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
			};
			/* no rts / cts for uart2 */
		};

		uart3 {
			uart3_xfer: uart3-xfer {
				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
			};

			uart3_cts: uart3-cts {
				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
			};

			uart3_rts: uart3-rts {
				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		sd0 {
			sd0_clk: sd0-clk {
				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd0_cmd: sd0-cmd {
				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd0_cd: sd0-cd {
				rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd0_wp: sd0-wp {
				rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd0_bus1: sd0-bus-width1 {
				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd0_bus4: sd0-bus-width4 {
				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		sd1 {
			sd1_clk: sd1-clk {
				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd1_cmd: sd1-cmd {
				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd1_cd: sd1-cd {
				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd1_wp: sd1-wp {
				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd1_bus1: sd1-bus-width1 {
				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
			};

			sd1_bus4: sd1-bus-width4 {
				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		i2s0 {
			i2s0_bus: i2s0-bus {
				rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		i2s1 {
			i2s1_bus: i2s1-bus {
				rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
			};
		};

		i2s2 {
			i2s2_bus: i2s2-bus {
				rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
						<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
			};
		};
	};
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_xfer>;
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_xfer>;
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_xfer>;
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_xfer>;
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_xfer>;
};

&mmc0 {
	clock-frequency = <50000000>;
	dmas = <&dmac2 1>;
	dma-names = "rx-tx";
	max-frequency = <50000000>;
	pinctrl-names = "default";
	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
};

&mmc1 {
	dmas = <&dmac2 3>;
	dma-names = "rx-tx";
	pinctrl-names = "default";
	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
};

&emmc {
	dmas = <&dmac2 4>;
	dma-names = "rx-tx";
};

&pwm0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm0_out>;
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm1_out>;
};

&pwm2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm2_out>;
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm3_out>;
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
};

&spi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
};

&uart0 {
	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
	dmas = <&dmac1_s 0>, <&dmac1_s 1>;
	dma-names = "tx", "rx";
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_xfer>;
};

&uart1 {
	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
	dmas = <&dmac1_s 2>, <&dmac1_s 3>;
	dma-names = "tx", "rx";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_xfer>;
};

&uart2 {
	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
	dmas = <&dmac2 6>, <&dmac2 7>;
	dma-names = "tx", "rx";
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_xfer>;
};

&uart3 {
	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
	dmas = <&dmac2 8>, <&dmac2 9>;
	dma-names = "tx", "rx";
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_xfer>;
};

&wdt {
	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
};

&emac {
	compatible = "rockchip,rk3066-emac";
};