blob: b0b26d8d68a28a5af603fcd950829956d9c40a89 [file] [log] [blame]
/*
* Device Tree for Bluestone (APM821xx) board.
*
* Copyright (c) 2010, Applied Micro Circuits Corporation
* Author: Tirumala R Marri <tmarri@apm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "apm,bluestone";
compatible = "apm,bluestone";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
serial0 = &UART0;
serial1 = &UART1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,apm821xx";
reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
next-level-cache = <&L2C0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <2>;
dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC3: interrupt-controller3 {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <3>;
dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
OCM: ocm@400040000 {
compatible = "ibm,ocm";
status = "ok";
cell-index = <1>;
/* configured in U-Boot */
reg = <4 0x00040000 0x8000>; /* 32K */
};
SDR0: sdr {
compatible = "ibm,sdr-apm821xx";
dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-apm821xx";
dcr-reg = <0x00c 0x002>;
};
L2C0: l2c {
compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
dcr-reg = <0x020 0x008
0x030 0x008>;
cache-line-size = <32>;
cache-size = <262144>;
interrupt-parent = <&UIC1>;
interrupts = <11 1>;
};
plb {
compatible = "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: sdram {
compatible = "ibm,sdram-apm821xx";
dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal2";
descriptor-memory = "ocm";
dcr-reg = <0x180 0x062>;
num-tx-chans = <1>;
num-rx-chans = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-parent = <&UIC2>;
interrupts = < /*TXEOB*/ 0x6 0x4
/*RXEOB*/ 0x7 0x4
/*SERR*/ 0x3 0x4
/*TXDE*/ 0x4 0x4
/*RXDE*/ 0x5 0x4>;
};
POB0: opb {
compatible = "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
reg = <0x00000000 0x00000000 0x00400000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "env";
reg = <0x00180000 0x00020000>;
};
partition@1a0000 {
label = "u-boot";
reg = <0x001a0000 0x00060000>;
};
};
ndfc@1,0 {
compatible = "ibm,ndfc";
reg = <0x00000003 0x00000000 0x00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
#address-cells = <1>;
#size-cells = <1>;
/* 2Gb Nand Flash */
nand {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "firmware";
reg = <0x00000000 0x00C00000>;
};
partition@c00000 {
label = "environment";
reg = <0x00C00000 0x00B00000>;
};
partition@1700000 {
label = "kernel";
reg = <0x01700000 0x00E00000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0x08200000>;
};
partition@a700000 {
label = "device-tree";
reg = <0x0A700000 0x00B00000>;
};
partition@b200000 {
label = "config";
reg = <0x0B200000 0x00D00000>;
};
partition@bf00000 {
label = "diag";
reg = <0x0BF00000 0x00C00000>;
};
partition@cb00000 {
label = "vendor";
reg = <0x0CB00000 0x3500000>;
};
};
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600300 0x00000008>;
virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600400 0x00000008>;
virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic";
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "st,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC0>;
interrupts = <0x9 0x8>;
};
sttm@4C {
compatible = "adm,adm1032";
reg = <0x4C>;
interrupt-parent = <&UIC1>;
interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
};
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic";
reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x3 0x4>;
};
RGMII0: emac-rgmii@ef601500 {
compatible = "ibm,rgmii";
reg = <0xef601500 0x00000008>;
has-mdio;
};
TAH0: emac-tah@ef601350 {
compatible = "ibm,tah";
reg = <0xef601350 0x00000030>;
};
EMAC0: ethernet@ef600c00 {
device_type = "network";
compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
interrupt-parent = <&EMAC0>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
/*Wake*/ 0x1 &UIC2 0x14 0x4>;
reg = <0xef600c00 0x000000c4>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <16384>;
tx-fifo-size = <2048>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
tah-device = <&TAH0>;
tah-channel = <0>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
};
PCIE0: pciex@d00000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
0x0000000c 0x08010000 0x00001000>; /* Registers */
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
MSI: ppc4xx-msi@C10000000 {
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
reg = < 0xC 0x10000000 0x100
0xC 0x10000000 0x100>;
sdr-base = <0x36C>;
msi-data = <0x00004440>;
msi-mask = <0x0000ffe0>;
interrupts =<0 1 2 3 4 5 6 7>;
interrupt-parent = <&MSI>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
msi-available-ranges = <0x0 0x100>;
interrupt-map = <
0 &UIC3 0x18 1
1 &UIC3 0x19 1
2 &UIC3 0x1A 1
3 &UIC3 0x1B 1
4 &UIC3 0x1C 1
5 &UIC3 0x1D 1
6 &UIC3 0x1E 1
7 &UIC3 0x1F 1
>;
};
};
};